2011-Dec-20 02:24:00 BEGIN executive: CIMA executive starting ... 2011-Dec-20 02:24:00 NOTE executive: STARTING NEW CIMA SESSION 2011-Dec-20 02:24:00 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2011-Dec-20 02:24:00 INFO4 executive: This is an ON-LINE session 2011-Dec-20 02:24:00 INFO4 executive: This is a LOCAL session 2011-Dec-20 02:24:00 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2011-Dec-20 02:24:00 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'ep' 2011-Dec-20 02:24:00 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20111220' 2011-Dec-20 02:24:01 LOG2 log_preferences: Currently applied preferences: 2011-Dec-20 02:24:01 LOG2 log_preferences: prefs(dailylog) = daily 2011-Dec-20 02:24:01 LOG2 log_preferences: prefs(offlinelog) = skip 2011-Dec-20 02:24:01 LOG2 log_preferences: prefs(datawindow) = ignore 2011-Dec-20 02:24:01 LOG2 log_preferences: prefs(limitwarning) = enabled 2011-Dec-20 02:24:01 LOG2 log_preferences: prefs(wappfailure) = abort 2011-Dec-20 02:24:01 LOG2 log_preferences: prefs(helpstyle) = stay-open 2011-Dec-20 02:24:01 LOG2 log_preferences: prefs(logcolours) = full 2011-Dec-20 02:24:01 LOG2 log_preferences: prefs(displaylevel) = INFO3 2011-Dec-20 02:24:01 LOG2 log_preferences: prefs(loglevel) = LOG5 2011-Dec-20 02:24:01 LOG2 log_preferences: prefs(displayformat) = short 2011-Dec-20 02:24:01 LOG2 log_preferences: prefs(logformat) = new 2011-Dec-20 02:24:01 LOG2 log_preferences: prefs(fontsize) = 4 2011-Dec-20 02:24:01 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2011-Dec-20 02:24:01 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2011-Dec-20 02:24:01 ALERT executive: CIMA executive ready 2011-Dec-20 02:24:02 NOTE frontend: CIMA frontend ready 2011-Dec-20 02:24:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:24:03 LOG4 got_cormsg: From DATATAKING: setup 2011-Dec-20 02:24:09 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2011-Dec-20 02:24:09 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2011-Dec-20 02:24:09 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2011-Dec-20 02:24:09 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2011-Dec-20 02:24:09 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Dec-20 02:24:09 NOTE select_receiver: Starting to select receiver ALFA 2011-Dec-20 02:24:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2011-Dec-20 02:24:09 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2011-Dec-20 02:24:09 LOG3 vw_send: To DATATAKING: acvlbical off 2011-Dec-20 02:24:09 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2011-Dec-20 02:24:09 STOP finish_task: Finishing task 'selecting receiver ALFA' 2011-Dec-20 02:24:09 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Dec-20 02:24:09 DONE finish_task: DONE finished selecting: receiver ALFA 2011-Dec-20 02:24:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-20 02:24:09 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2011-Dec-20 02:24:09 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Dec-20 02:24:09 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2011-Dec-20 02:24:09 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2011-Dec-20 02:24:09 LOG4 got_cormsg: From DATATAKING: vw% io 2011-Dec-20 02:24:09 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2011-Dec-20 02:24:09 LOG4 got_cormsg: From DATATAKING: 2011-Dec-20 02:24:09 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2011-Dec-20 02:24:09 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2011-Dec-20 02:24:09 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2011-Dec-20 02:24:09 LOG4 got_cormsg: From DATATAKING: vw% connectall 2011-Dec-20 02:24:09 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2011-Dec-20 02:24:09 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2011-Dec-20 02:24:09 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2011-Dec-20 02:24:09 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2011-Dec-20 02:24:09 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2011-Dec-20 02:24:09 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2011-Dec-20 02:24:09 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2011-Dec-20 02:24:09 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2011-Dec-20 02:24:09 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2011-Dec-20 02:24:09 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2011-Dec-20 02:24:09 LOG4 got_cormsg: From DATATAKING: acvlbical off 2011-Dec-20 02:24:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:24:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:24:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:24:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:24:47 INFO5 CIMA-read_in_command_file: Included command file 'command_galfacurpos_cima31.cmd' (at lines 49 - 65) 2011-Dec-20 02:24:47 INFO4 CIMA-load_command_file: Loaded command file '111220Morning.cmd' 2011-Dec-20 02:24:48 INFO1 CIMA-run_command_file: Transferring command file '111220Morning.cmd' to executive ... 2011-Dec-20 02:24:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD ages_mock.conf} 2011-Dec-20 02:24:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2011-Dec-20 02:24:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {CATALOG AGESFull.cat} 2011-Dec-20 02:24:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 9 {IF LSTSLEW(AGES3193_p3_022) < 085341 THEN} 2011-Dec-20 02:24:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 10 {FIXEDDRIFT az=248.00 alfaangle=-51.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_022 ra=95300.00 dec=232130.00} 2011-Dec-20 02:24:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {ENDIF} 2011-Dec-20 02:24:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 16 {IF LSTSLEW(AGES3193_p3_024) < 091711 THEN} 2011-Dec-20 02:24:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 17 {FIXEDDRIFT az=238.59 alfaangle=-38.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_024 ra=95300.00 dec=231830.00} 2011-Dec-20 02:24:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 20 {ENDIF} 2011-Dec-20 02:24:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 23 {IF LSTSLEW(AGES3193_p3_026) < 094041 THEN} 2011-Dec-20 02:24:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 24 {FIXEDDRIFT az=211.54 alfaangle=-9.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_026 ra=95300.00 dec=231530.00} 2011-Dec-20 02:24:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 27 {ENDIF} 2011-Dec-20 02:24:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 30 {IF LSTSLEW(AGES3193_p3_028) < 100641 THEN} 2011-Dec-20 02:24:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 31 {FIXEDDRIFT az=148.19 alfaangle=48.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_028 ra=95300.00 dec=231230.00} 2011-Dec-20 02:24:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 34 {ENDIF} 2011-Dec-20 02:24:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 37 {IF LSTSLEW(AGES3193_p3_032) < 103011 THEN} 2011-Dec-20 02:24:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 38 {FIXEDDRIFT az=120.37 alfaangle=78.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_032 ra=95300.00 dec=230630.00} 2011-Dec-20 02:24:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 41 {ENDIF} 2011-Dec-20 02:24:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 44 {IF LSTSLEW(AGES3193_p3_034) < 105341 THEN} 2011-Dec-20 02:24:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 45 {FIXEDDRIFT az=110.87 alfaangle=-88.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_034 ra=95300.00 dec=230330.00} 2011-Dec-20 02:24:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 48 {ENDIF} 2011-Dec-20 02:24:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 55 {LOAD togs_cima31.conf} 2011-Dec-20 02:24:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 56 {TRACKCURPOS} 2011-Dec-20 02:24:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 57 {ALFAANGLE 19} 2011-Dec-20 02:24:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 61 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2011-Dec-20 02:24:49 COMMAND CIMA-send_to_exec: Sending command to run command file 2011-Dec-20 02:24:49 LOG4 exec_msg: From OBSERVER: run_command_file 111220Morning.cmd 1 1 25 2011-Dec-20 02:24:49 LOG4 run_command_file: Calling 'run_command_file 111220Morning.cmd 1 1 25' 2011-Dec-20 02:24:49 BEGIN begin_task: Starting task 'running command file '111220Morning.cmd'' 2011-Dec-20 02:24:49 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2011-Dec-20 02:24:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '111220Morning.cmd' ...} 2011-Dec-20 02:24:49 NOTE run_command_file: Starting execution of command file '111220Morning.cmd' from line 1 2011-Dec-20 02:24:49 COMMAND run_command_line: EXECUTING command 4: 'LOAD ages_mock.conf' 2011-Dec-20 02:24:49 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2011-Dec-20 02:24:49 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-20 02:24:49 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2011-Dec-20 02:24:49 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock.conf' 2011-Dec-20 02:24:49 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2011-Dec-20 02:24:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2011-Dec-20 02:24:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2011-Dec-20 02:24:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2011-Dec-20 02:24:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2011-Dec-20 02:24:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2011-Dec-20 02:24:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled1) "1" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled2) "0" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards1) "both" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards2) "both" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode1) "spectra" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode2) "spectra" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg1) "2-pol" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg2) "2-pol" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits1) "32" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits2) "32" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor1) "1" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor2) "1" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset1) "0.0" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset2) "0.0" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags1) "8192" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags2) "8192" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs1) "1000.0" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs2) "1000.0" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad1) "1" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad2) "0" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors1) "13" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors2) "0" 2011-Dec-20 02:24:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors1) "0" 2011-Dec-20 02:24:52 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors2) "0" 2011-Dec-20 02:24:52 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors1) "0" 2011-Dec-20 02:24:52 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors2) "0" 2011-Dec-20 02:24:52 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors1) "0" 2011-Dec-20 02:24:52 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors2) "0" 2011-Dec-20 02:24:52 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype1) "fits" 2011-Dec-20 02:24:52 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype2) "fits" 2011-Dec-20 02:24:52 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2011-Dec-20 02:24:52 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2011-Dec-20 02:24:52 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2011-Dec-20 02:24:52 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2011-Dec-20 02:24:52 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2011-Dec-20 02:24:52 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2011-Dec-20 02:24:52 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2011-Dec-20 02:24:52 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2011-Dec-20 02:24:52 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2011-Dec-20 02:24:52 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-20 02:24:52 BEGIN begin_task: Starting task 'configuring IF/LO path' 2011-Dec-20 02:24:52 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Dec-20 02:24:52 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2011-Dec-20 02:24:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2011-Dec-20 02:24:52 INFO1 config_iflo: Selecting receiver ALFA 2011-Dec-20 02:24:52 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2011-Dec-20 02:24:52 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2011-Dec-20 02:24:52 START begin_task: Starting task 'selecting receiver ALFA' 2011-Dec-20 02:24:52 LOG5 begin_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Dec-20 02:24:52 NOTE select_receiver: Starting to select receiver ALFA 2011-Dec-20 02:24:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2011-Dec-20 02:24:52 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2011-Dec-20 02:24:52 LOG3 vw_send: To DATATAKING: acvlbical off 2011-Dec-20 02:24:52 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2011-Dec-20 02:24:52 STOP finish_task: Finishing task 'selecting receiver ALFA' 2011-Dec-20 02:24:52 LOG5 finish_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Dec-20 02:24:52 INFO2 finish_task: DONE finished selecting: receiver ALFA 2011-Dec-20 02:24:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 02:24:52 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2011-Dec-20 02:24:52 LOG5 end_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Dec-20 02:24:52 START begin_task: Starting task 'waiting for receiver ALFA' 2011-Dec-20 02:24:52 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2011-Dec-20 02:24:52 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2011-Dec-20 02:24:52 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2011-Dec-20 02:24:52 INFO1 config_iflo: Configuring rest of the IF/LO path 2011-Dec-20 02:24:52 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2011-Dec-20 02:24:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-20 02:24:52 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-20 02:24:52 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-20 02:24:52 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2011-Dec-20 02:24:52 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-20 02:24:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-20 02:24:52 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2011-Dec-20 02:24:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-20 02:24:52 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-20 02:24:52 LOG3 vw_send: To DATATAKING: alfafb 1 2011-Dec-20 02:24:52 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2011-Dec-20 02:24:52 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2011-Dec-20 02:24:52 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2011-Dec-20 02:24:52 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2011-Dec-20 02:24:52 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2011-Dec-20 02:24:52 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2011-Dec-20 02:24:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2011-Dec-20 02:24:52 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2011-Dec-20 02:24:52 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2011-Dec-20 02:24:52 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2011-Dec-20 02:24:52 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2011-Dec-20 02:24:52 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2011-Dec-20 02:24:52 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2011-Dec-20 02:24:52 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2011-Dec-20 02:24:52 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2011-Dec-20 02:24:52 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2011-Dec-20 02:24:53 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2011-Dec-20 02:24:53 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2011-Dec-20 02:24:53 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2011-Dec-20 02:24:53 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2011-Dec-20 02:24:53 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2011-Dec-20 02:24:53 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2011-Dec-20 02:24:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 02:24:53 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2011-Dec-20 02:24:53 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2011-Dec-20 02:24:53 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2011-Dec-20 02:24:53 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2011-Dec-20 02:24:53 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2011-Dec-20 02:24:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2011-Dec-20 02:24:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 02:24:53 START begin_task: Starting task 'waiting on configuring IF/LO path' 2011-Dec-20 02:24:53 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2011-Dec-20 02:24:53 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2011-Dec-20 02:24:53 LOG4 got_cormsg: From DATATAKING: acvlbical off 2011-Dec-20 02:24:53 LOG4 got_cormsg: From DATATAKING: alfafb 1 2011-Dec-20 02:24:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2011-Dec-20 02:24:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2011-Dec-20 02:24:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2011-Dec-20 02:24:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2011-Dec-20 02:24:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2011-Dec-20 02:24:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2011-Dec-20 02:24:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2011-Dec-20 02:24:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2011-Dec-20 02:24:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2011-Dec-20 02:24:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2011-Dec-20 02:24:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2011-Dec-20 02:24:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2011-Dec-20 02:24:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2011-Dec-20 02:24:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2011-Dec-20 02:24:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 02:24:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2011-Dec-20 02:24:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2011-Dec-20 02:24:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2011-Dec-20 02:24:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2011-Dec-20 02:24:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 02:24:59 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:24:59 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:25:00 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:25:00 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:25:00 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:25:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:25:05 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:25:05 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:25:06 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:25:06 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:25:06 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:25:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:25:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:25:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:25:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:25:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:25:08 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:25:08 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:25:08 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:25:08 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:25:08 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:25:08 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:25:08 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-20 02:25:08 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2011-Dec-20 02:25:08 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2011-Dec-20 02:25:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2011-Dec-20 02:25:08 STOP finish_task: Finishing task 'configuring IF/LO path' 2011-Dec-20 02:25:08 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Dec-20 02:25:08 DONE finish_task: DONE finished configuration: IF/LO path 2011-Dec-20 02:25:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-20 02:25:09 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2011-Dec-20 02:25:09 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Dec-20 02:25:09 BEGIN begin_task: Starting task 'configuring WAPPs' 2011-Dec-20 02:25:09 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2011-Dec-20 02:25:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2011-Dec-20 02:25:09 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2011-Dec-20 02:25:09 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Dec-20 02:25:09 START begin_task: Starting task 'selecting calibration port' 2011-Dec-20 02:25:09 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2011-Dec-20 02:25:09 LOG3 vw_send: To DATATAKING: calport 3 2011-Dec-20 02:25:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Dec-20 02:25:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 02:25:09 START begin_task: Starting task 'waiting on calport' 2011-Dec-20 02:25:09 LOG5 begin_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2011-Dec-20 02:25:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:25:09 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Dec-20 02:25:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 02:25:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:25:09 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-20 02:25:09 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Dec-20 02:25:09 LOG5 end_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2011-Dec-20 02:25:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Dec-20 02:25:09 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Dec-20 02:25:09 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2011-Dec-20 02:25:09 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-20 02:25:09 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-20 02:25:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-20 02:25:09 LOG5 begin_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2011-Dec-20 02:25:09 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-20 02:25:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:25:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-20 02:25:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-20 02:25:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-20 02:25:09 LOG5 end_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2011-Dec-20 02:25:09 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2011-Dec-20 02:25:09 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2011-Dec-20 02:25:09 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2011-Dec-20 02:25:09 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2011-Dec-20 02:25:09 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2011-Dec-20 02:25:09 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2011-Dec-20 02:25:09 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2011-Dec-20 02:25:09 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2011-Dec-20 02:25:09 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ep 2011-Dec-20 02:25:09 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ep 2011-Dec-20 02:25:09 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ep 2011-Dec-20 02:25:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ep 2011-Dec-20 02:25:09 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Dec-20 02:25:09 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Dec-20 02:25:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-20 02:25:09 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2011-Dec-20 02:25:10 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-20 02:25:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-20 02:25:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-20 02:25:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-20 02:25:10 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2011-Dec-20 02:25:10 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ep 2011-Dec-20 02:25:10 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ep 2011-Dec-20 02:25:10 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ep 2011-Dec-20 02:25:10 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ep 2011-Dec-20 02:25:10 STOP finish_task: Finishing task 'configuring WAPPs' 2011-Dec-20 02:25:10 LOG5 finish_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2011-Dec-20 02:25:10 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2011-Dec-20 02:25:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-20 02:25:10 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2011-Dec-20 02:25:10 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2011-Dec-20 02:25:10 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2011-Dec-20 02:25:10 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2011-Dec-20 02:25:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2011-Dec-20 02:25:10 INFO1 config_mock: Starting to configure the Mock spectrometer 2011-Dec-20 02:25:10 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Dec-20 02:25:10 START begin_task: Starting task 'selecting calibration port' 2011-Dec-20 02:25:10 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2011-Dec-20 02:25:10 LOG3 vw_send: To DATATAKING: calport 3 2011-Dec-20 02:25:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Dec-20 02:25:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 02:25:10 START begin_task: Starting task 'waiting on calport' 2011-Dec-20 02:25:10 LOG5 begin_task: Level: (4) ID = <10015> Status = 0 0 0 0 ok 2011-Dec-20 02:25:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ep' 2011-Dec-20 02:25:10 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Dec-20 02:25:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2011-Dec-20 02:25:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2011-Dec-20 02:25:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 02:25:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:25:10 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-20 02:25:10 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Dec-20 02:25:10 LOG5 end_task: Level: (4) ID = <10015> Status = 0 0 0 0 ok 2011-Dec-20 02:25:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Dec-20 02:25:10 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Dec-20 02:25:10 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2011-Dec-20 02:25:10 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-20 02:25:10 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-20 02:25:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-20 02:25:10 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2011-Dec-20 02:25:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:25:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ep' 2011-Dec-20 02:25:10 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-20 02:25:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-20 02:25:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-20 02:25:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-20 02:25:10 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2011-Dec-20 02:25:10 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Dec-20 02:25:10 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Dec-20 02:25:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-20 02:25:11 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2011-Dec-20 02:25:11 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-20 02:25:11 NOTE WAPPDATA-new_file: New FITS file: wapp.20111220.a2048.0000.fits 2011-Dec-20 02:25:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-20 02:25:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-20 02:25:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-20 02:25:11 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2011-Dec-20 02:25:11 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2011-Dec-20 02:25:11 LOG3 socket_wait: To MOCK: NOP 2011-Dec-20 02:25:11 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2011-Dec-20 02:25:11 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2011-Dec-20 02:25:11 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20111220.a2048.0000.fits} 2011-Dec-20 02:25:11 ALERT got_mock_message: Mock spectrometer restarting 2011-Dec-20 02:25:11 LOG4 from_mock: From MOCK: nop ok 2011-Dec-20 02:25:11 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2011-Dec-20 02:25:11 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2011-Dec-20 02:25:11 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2011-Dec-20 02:25:11 LOG2 config_mock: Mock spectrometer configuration group 1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2011-Dec-20 02:25:11 LOG2 config_mock: Mock spectrometer configuration group 1 (0): datatype=AB 2011-Dec-20 02:25:11 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bits=32 2011-Dec-20 02:25:11 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bwmhz=172.032 2011-Dec-20 02:25:11 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevif1hz=250000000 2011-Dec-20 02:25:11 LOG2 config_mock: Mock spectrometer configuration group 1 (0): digfreqoffhz=0.0 2011-Dec-20 02:25:11 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fftlen=8192 2011-Dec-20 02:25:11 LOG2 config_mock: Mock spectrometer configuration group 1 (0): dumptmsec=1.0 2011-Dec-20 02:25:11 LOG2 config_mock: Mock spectrometer configuration group 1 (0): blankatod=1 2011-Dec-20 02:25:11 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskadc=13 2011-Dec-20 02:25:11 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskpfb=0 2011-Dec-20 02:25:11 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskacc=0 2011-Dec-20 02:25:11 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskash=0 2011-Dec-20 02:25:11 LOG2 config_mock: Mock spectrometer configuration group 1 (0): adcclkhz=172032000 2011-Dec-20 02:25:11 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevlohz=175000000 325000000 2011-Dec-20 02:25:11 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fileprefix=a2048 2011-Dec-20 02:25:11 LOG2 config_mock: Mock spectrometer configuration group 1 (0): maxfilesizemb=2048 2011-Dec-20 02:25:11 LOG2 config_mock: Mock spectrometer configuration group 1 (0): calctl=c0 2011-Dec-20 02:25:11 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group 1' using string 'conf' 2011-Dec-20 02:25:11 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bits=32:bwmhz=172.032:pdevif1hz=250000000:digfreqoffhz=0.0:fftlen=8192:dumptmsec=1.0:blankatod=1:emaskadc=13:emaskpfb=0:emaskacc=0:emaskash=0:adcclkhz=172032000:pdevlohz=175000000 325000000:fileprefix=a2048:maxfilesizemb=2048:calctl=c0 2011-Dec-20 02:25:11 START begin_task: Starting task 'waiting on configure Mock spectrometer group 1' 2011-Dec-20 02:25:11 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2011-Dec-20 02:25:11 LOG4 from_mock: From MOCK: confok 2011-Dec-20 02:25:11 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group 1' with status 'OK' 2011-Dec-20 02:25:11 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2011-Dec-20 02:25:11 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group 1' 2011-Dec-20 02:25:11 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group 2' using string 'conf' 2011-Dec-20 02:25:11 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2011-Dec-20 02:25:11 START begin_task: Starting task 'waiting on disable Mock spectrometer group 2' 2011-Dec-20 02:25:11 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2011-Dec-20 02:25:11 LOG4 from_mock: From MOCK: confok 2011-Dec-20 02:25:11 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group 2' with status 'OK' 2011-Dec-20 02:25:11 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2011-Dec-20 02:25:11 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group 2' 2011-Dec-20 02:25:11 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2011-Dec-20 02:25:11 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2011-Dec-20 02:25:11 DONE finish_task: DONE finished configuring: the Mock spectrometer 2011-Dec-20 02:25:11 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-20 02:25:11 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2011-Dec-20 02:25:11 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2011-Dec-20 02:25:11 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2011-Dec-20 02:25:12 COMMAND run_command_line: EXECUTING command 5: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2011-Dec-20 02:25:12 COMMAND run_command_line: EXECUTING command 6: 'CATALOG AGESFull.cat' 2011-Dec-20 02:25:12 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2011-Dec-20 02:25:12 COMMAND run_command_line: EXECUTING command 9: 'IF LSTSLEW(AGES3193_p3_022) < 085341 THEN' 2011-Dec-20 02:25:12 LOG3 is_if_valid: Current source data: down 254.8 28.8 40 - - 203 4.9 2011-Dec-20 02:25:12 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_022) < 085341 2011-Dec-20 02:25:12 INFO5 is_if_valid: Condition parsed as: 7.9508306666666666 < 8.8947222222222209 2011-Dec-20 02:25:12 COMMAND run_command_line: EXECUTING command 10: 'FIXEDDRIFT az=248.00 alfaangle=-51.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_022 ra=95300.00 dec=232130.00' 2011-Dec-20 02:25:12 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-20 02:25:13 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-20 02:25:13 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 248.00 -51.6 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_022 95300.00 232130.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-20 02:25:13 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-20 02:25:13 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2011-Dec-20 02:25:13 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AUDSGAL2577' 2011-Dec-20 02:25:13 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-20 02:25:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_022} 2011-Dec-20 02:25:13 INFO3 fixed_driftmap: Sending telescope to Az = 248.00 and ZA = 14.85 2011-Dec-20 02:25:13 LOG3 track_source: Calling 'track_source AGES3193_p3_022 248.00 14.8538878712 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-20 02:25:13 START begin_task: Starting task 'sending tracking commands' 2011-Dec-20 02:25:13 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2011-Dec-20 02:25:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_022} INFO {Slewing to source 'AGES3193_p3_022' ...} 2011-Dec-20 02:25:13 INFO1 track_source: Starting to track AGES3193_p3_022 2011-Dec-20 02:25:13 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_022" 2011-Dec-20 02:25:13 LOG3 vw_send: To DATATAKING: set ra 248.00 2011-Dec-20 02:25:13 LOG3 vw_send: To DATATAKING: set dec 14.8538878712 2011-Dec-20 02:25:13 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-20 02:25:13 LOG3 vw_send: To DATATAKING: pnt tr 248.00 14.8538878712 -CF 2011-Dec-20 02:25:13 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 02:25:13 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-20 02:25:13 LOG5 finish_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2011-Dec-20 02:25:13 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-20 02:25:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 02:25:13 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-20 02:25:13 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2011-Dec-20 02:25:13 START begin_task: Starting task 'rotate ALFA to -51.6 degrees' 2011-Dec-20 02:25:13 LOG5 begin_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2011-Dec-20 02:25:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -51.6 degrees ...} 2011-Dec-20 02:25:13 INFO2 rotate_alfa: ALFA commanded to -51.6 degrees 2011-Dec-20 02:25:13 LOG3 sock_errsend: To ALFAMOTOR: POSITION -51.6 REPLY 2011-Dec-20 02:25:13 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-20 02:25:13 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-20 02:25:13 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2011-Dec-20 02:25:13 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_022" 2011-Dec-20 02:25:13 LOG4 got_cormsg: From DATATAKING: set ra 248.00 2011-Dec-20 02:25:13 LOG4 got_cormsg: From DATATAKING: set dec 14.8538878712 2011-Dec-20 02:25:13 LOG4 got_cormsg: From DATATAKING: vw% 248.00 2011-Dec-20 02:25:13 LOG4 got_cormsg: From DATATAKING: vw% 14.8538878712 2011-Dec-20 02:25:13 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:25:13 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-20 02:25:13 LOG4 got_cormsg: From DATATAKING: pnt tr 248.00 14.8538878712 -CF 2011-Dec-20 02:25:13 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 02:25:13 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-20 02:25:13 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:25:22 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-20 02:25:22 INFO3 alfa_motor: ALFA rotator in-position -51.60 degrees 2011-Dec-20 02:25:22 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-20 02:25:22 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2011-Dec-20 02:25:22 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-20 02:25:22 STOP finish_task: Finishing task 'rotate ALFA to -51.6 degrees' 2011-Dec-20 02:25:22 LOG5 finish_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2011-Dec-20 02:25:22 INFO2 finish_task: DONE finished configuration: rotating ALFA to -51.6 degrees 2011-Dec-20 02:25:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 02:25:22 STOP end_task: Finishing task 'rotate ALFA to -51.6 degrees' with status 'OK' 2011-Dec-20 02:25:22 LOG5 end_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2011-Dec-20 02:25:22 START begin_task: Starting task 'waiting on telescope' 2011-Dec-20 02:25:22 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2011-Dec-20 02:25:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-20 02:25:22 LOG3 waittrk: Start waittrk 5 2011-Dec-20 02:25:22 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-20 02:25:22 LOG5 begin_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2011-Dec-20 02:25:27 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-20 02:25:27 LOG5 end_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2011-Dec-20 02:25:27 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-20 02:25:27 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2011-Dec-20 02:27:27 COMMAND CIMA-send_to_exec: Sending command to abort observation 2011-Dec-20 02:27:27 LOG4 exec_msg: From OBSERVER: abort_task abort 2011-Dec-20 02:27:27 WARNING abort_task: WARNING abort requested! 2011-Dec-20 02:27:27 WARNING abort_task: WARNING Aborting wait for waiting on telescope on source 2011-Dec-20 02:27:27 STOP end_task: Finishing task 'waiting on telescope on source' with status 'ABORT' 2011-Dec-20 02:27:27 LOG5 end_task: Level: (4) ID = <10027> Status = 1 0 0 0 abort 2011-Dec-20 02:27:27 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-20 02:27:27 LOG4 waittrk: Current telescope position: Az = 247.57 ZA = 13.43 2011-Dec-20 02:27:27 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-20 02:27:27 LOG5 finish_task: Level: (3) ID = <10025> Status = 1 0 0 0 abort 2011-Dec-20 02:27:27 WARNING finish_task: WARNING aborted waiting: telescope on source 2011-Dec-20 02:27:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Aborted 2011-Dec-20 02:27:27 STOP end_task: Finishing task 'waiting on telescope' with status 'ABORT' 2011-Dec-20 02:27:27 LOG5 end_task: Level: (3) ID = <10025> Status = 1 0 0 0 abort 2011-Dec-20 02:27:27 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-20 02:27:27 LOG5 finish_task: Level: (2) ID = <10021> Status = 1 0 0 0 abort 2011-Dec-20 02:27:27 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2011-Dec-20 02:27:27 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2011-Dec-20 02:27:27 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2011-Dec-20 02:27:27 LOG5 end_task: Level: (2) ID = <10021> Status = 1 0 0 0 abort 2011-Dec-20 02:27:27 ALERT run_command_file: Stopping command file processing at line 10! 2011-Dec-20 02:27:27 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2011-Dec-20 02:27:27 STOP finish_task: Finishing task 'running command file '111220Morning.cmd'' 2011-Dec-20 02:27:27 LOG5 finish_task: Level: (1) ID = <10002> Status = 1 0 0 0 abort 2011-Dec-20 02:27:27 WARNING finish_task: WARNING aborted running: command file '111220Morning.cmd' 2011-Dec-20 02:27:27 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2011-Dec-20 02:27:27 END end_task: Finishing task 'running command file '111220Morning.cmd'' with status 'ABORT' 2011-Dec-20 02:27:27 LOG5 end_task: Level: (1) ID = <10002> Status = 1 0 0 0 abort 2011-Dec-20 02:27:28 ALERT CIMA-exit_cima: Exiting CIMA ... 2011-Dec-20 02:27:28 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2011-Dec-20 02:27:28 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2011-Dec-20 02:27:28 LOG3 vw_send: To DATATAKING: mvdata a2048 2011-Dec-20 02:27:28 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2011-Dec-20 02:27:28 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2011-Dec-20 02:27:28 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2011-Dec-20 02:27:28 LOG4 got_cormsg: From DATATAKING: mvdata a2048 2011-Dec-20 02:27:28 NOTE CIMA-exit_cima: Cleaning up session ... 2011-Dec-20 02:27:28 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2011-Dec-20 02:27:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 02:27:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:17:06 BEGIN executive: CIMA executive starting ... 2011-Dec-20 03:17:06 NOTE executive: STARTING NEW CIMA SESSION 2011-Dec-20 03:17:06 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2011-Dec-20 03:17:06 INFO4 executive: This is an ON-LINE session 2011-Dec-20 03:17:06 INFO4 executive: This is a LOCAL session 2011-Dec-20 03:17:06 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2011-Dec-20 03:17:06 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'ep' 2011-Dec-20 03:17:06 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20111220' 2011-Dec-20 03:17:07 LOG2 log_preferences: Currently applied preferences: 2011-Dec-20 03:17:07 LOG2 log_preferences: prefs(dailylog) = daily 2011-Dec-20 03:17:07 LOG2 log_preferences: prefs(offlinelog) = skip 2011-Dec-20 03:17:07 LOG2 log_preferences: prefs(datawindow) = ignore 2011-Dec-20 03:17:07 LOG2 log_preferences: prefs(limitwarning) = enabled 2011-Dec-20 03:17:07 LOG2 log_preferences: prefs(wappfailure) = abort 2011-Dec-20 03:17:07 LOG2 log_preferences: prefs(helpstyle) = stay-open 2011-Dec-20 03:17:07 LOG2 log_preferences: prefs(logcolours) = full 2011-Dec-20 03:17:07 LOG2 log_preferences: prefs(displaylevel) = INFO3 2011-Dec-20 03:17:07 LOG2 log_preferences: prefs(loglevel) = LOG5 2011-Dec-20 03:17:07 LOG2 log_preferences: prefs(displayformat) = short 2011-Dec-20 03:17:07 LOG2 log_preferences: prefs(logformat) = new 2011-Dec-20 03:17:07 LOG2 log_preferences: prefs(fontsize) = 4 2011-Dec-20 03:17:07 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2011-Dec-20 03:17:07 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2011-Dec-20 03:17:07 ALERT executive: CIMA executive ready 2011-Dec-20 03:17:08 NOTE frontend: CIMA frontend ready 2011-Dec-20 03:17:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:17:09 LOG4 got_cormsg: From DATATAKING: setup 2011-Dec-20 03:17:15 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2011-Dec-20 03:17:15 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2011-Dec-20 03:17:15 LOG4 got_cormsg: From DATATAKING: vw% io 2011-Dec-20 03:17:15 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2011-Dec-20 03:17:15 LOG4 got_cormsg: From DATATAKING: 2011-Dec-20 03:17:15 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2011-Dec-20 03:17:15 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2011-Dec-20 03:17:15 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2011-Dec-20 03:17:15 LOG4 got_cormsg: From DATATAKING: vw% connectall 2011-Dec-20 03:17:15 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2011-Dec-20 03:17:15 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2011-Dec-20 03:17:15 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2011-Dec-20 03:17:15 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2011-Dec-20 03:17:15 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2011-Dec-20 03:17:15 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2011-Dec-20 03:17:15 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2011-Dec-20 03:17:15 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2011-Dec-20 03:17:15 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2011-Dec-20 03:17:15 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:17:15 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:17:23 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2011-Dec-20 03:17:23 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2011-Dec-20 03:17:23 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2011-Dec-20 03:17:23 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2011-Dec-20 03:17:23 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Dec-20 03:17:23 NOTE select_receiver: Starting to select receiver ALFA 2011-Dec-20 03:17:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2011-Dec-20 03:17:23 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2011-Dec-20 03:17:23 LOG3 vw_send: To DATATAKING: acvlbical off 2011-Dec-20 03:17:23 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2011-Dec-20 03:17:23 STOP finish_task: Finishing task 'selecting receiver ALFA' 2011-Dec-20 03:17:23 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Dec-20 03:17:23 DONE finish_task: DONE finished selecting: receiver ALFA 2011-Dec-20 03:17:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-20 03:17:24 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2011-Dec-20 03:17:24 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Dec-20 03:17:24 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2011-Dec-20 03:17:24 LOG4 got_cormsg: From DATATAKING: acvlbical off 2011-Dec-20 03:17:30 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:17:31 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:17:48 INFO5 CIMA-read_in_command_file: Included command file 'command_galfacurpos_cima31.cmd' (at lines 49 - 65) 2011-Dec-20 03:17:49 INFO4 CIMA-load_command_file: Loaded command file '111220Morning.cmd' 2011-Dec-20 03:17:50 INFO1 CIMA-run_command_file: Transferring command file '111220Morning.cmd' to executive ... 2011-Dec-20 03:17:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD ages_mock.conf} 2011-Dec-20 03:17:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2011-Dec-20 03:17:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {CATALOG AGESFull.cat} 2011-Dec-20 03:17:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 9 {IF LSTSLEW(AGES3193_p3_022) < 085341 THEN} 2011-Dec-20 03:17:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 10 {FIXEDDRIFT az=248.00 alfaangle=-51.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_022 ra=95300.00 dec=232130.00} 2011-Dec-20 03:17:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {ENDIF} 2011-Dec-20 03:17:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 16 {IF LSTSLEW(AGES3193_p3_024) < 091711 THEN} 2011-Dec-20 03:17:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 17 {FIXEDDRIFT az=238.59 alfaangle=-38.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_024 ra=95300.00 dec=231830.00} 2011-Dec-20 03:17:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 20 {ENDIF} 2011-Dec-20 03:17:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 23 {IF LSTSLEW(AGES3193_p3_026) < 094041 THEN} 2011-Dec-20 03:17:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 24 {FIXEDDRIFT az=211.54 alfaangle=-9.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_026 ra=95300.00 dec=231530.00} 2011-Dec-20 03:17:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 27 {ENDIF} 2011-Dec-20 03:17:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 30 {IF LSTSLEW(AGES3193_p3_028) < 100641 THEN} 2011-Dec-20 03:17:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 31 {FIXEDDRIFT az=148.19 alfaangle=48.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_028 ra=95300.00 dec=231230.00} 2011-Dec-20 03:17:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 34 {ENDIF} 2011-Dec-20 03:17:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 37 {IF LSTSLEW(AGES3193_p3_032) < 103011 THEN} 2011-Dec-20 03:17:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 38 {FIXEDDRIFT az=120.37 alfaangle=78.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_032 ra=95300.00 dec=230630.00} 2011-Dec-20 03:17:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 41 {ENDIF} 2011-Dec-20 03:17:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 44 {IF LSTSLEW(AGES3193_p3_034) < 105341 THEN} 2011-Dec-20 03:17:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 45 {FIXEDDRIFT az=110.87 alfaangle=-88.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_034 ra=95300.00 dec=230330.00} 2011-Dec-20 03:17:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 48 {ENDIF} 2011-Dec-20 03:17:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 55 {LOAD togs_cima31.conf} 2011-Dec-20 03:17:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 56 {TRACKCURPOS} 2011-Dec-20 03:17:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 57 {ALFAANGLE 19} 2011-Dec-20 03:17:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 61 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2011-Dec-20 03:17:51 COMMAND CIMA-send_to_exec: Sending command to run command file 2011-Dec-20 03:17:51 LOG4 exec_msg: From OBSERVER: run_command_file 111220Morning.cmd 1 1 25 2011-Dec-20 03:17:51 LOG4 run_command_file: Calling 'run_command_file 111220Morning.cmd 1 1 25' 2011-Dec-20 03:17:51 BEGIN begin_task: Starting task 'running command file '111220Morning.cmd'' 2011-Dec-20 03:17:51 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2011-Dec-20 03:17:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '111220Morning.cmd' ...} 2011-Dec-20 03:17:51 NOTE run_command_file: Starting execution of command file '111220Morning.cmd' from line 1 2011-Dec-20 03:17:51 COMMAND run_command_line: EXECUTING command 4: 'LOAD ages_mock.conf' 2011-Dec-20 03:17:51 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2011-Dec-20 03:17:51 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-20 03:17:51 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2011-Dec-20 03:17:51 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock.conf' 2011-Dec-20 03:17:51 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2011-Dec-20 03:17:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2011-Dec-20 03:17:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2011-Dec-20 03:17:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2011-Dec-20 03:17:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2011-Dec-20 03:17:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2011-Dec-20 03:17:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled1) "1" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled2) "0" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards1) "both" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards2) "both" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode1) "spectra" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode2) "spectra" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg1) "2-pol" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg2) "2-pol" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits1) "32" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits2) "32" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor1) "1" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor2) "1" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset1) "0.0" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset2) "0.0" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags1) "8192" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags2) "8192" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs1) "1000.0" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs2) "1000.0" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad1) "1" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad2) "0" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors1) "13" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors2) "0" 2011-Dec-20 03:17:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors1) "0" 2011-Dec-20 03:17:54 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors2) "0" 2011-Dec-20 03:17:54 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors1) "0" 2011-Dec-20 03:17:54 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors2) "0" 2011-Dec-20 03:17:54 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors1) "0" 2011-Dec-20 03:17:54 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors2) "0" 2011-Dec-20 03:17:54 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype1) "fits" 2011-Dec-20 03:17:54 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype2) "fits" 2011-Dec-20 03:17:54 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2011-Dec-20 03:17:54 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2011-Dec-20 03:17:54 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2011-Dec-20 03:17:54 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2011-Dec-20 03:17:54 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2011-Dec-20 03:17:54 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2011-Dec-20 03:17:54 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2011-Dec-20 03:17:54 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2011-Dec-20 03:17:54 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2011-Dec-20 03:17:54 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-20 03:17:54 BEGIN begin_task: Starting task 'configuring IF/LO path' 2011-Dec-20 03:17:54 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Dec-20 03:17:54 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2011-Dec-20 03:17:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2011-Dec-20 03:17:54 INFO1 config_iflo: Selecting receiver ALFA 2011-Dec-20 03:17:54 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2011-Dec-20 03:17:54 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2011-Dec-20 03:17:54 START begin_task: Starting task 'selecting receiver ALFA' 2011-Dec-20 03:17:54 LOG5 begin_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Dec-20 03:17:54 NOTE select_receiver: Starting to select receiver ALFA 2011-Dec-20 03:17:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2011-Dec-20 03:17:54 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2011-Dec-20 03:17:54 LOG3 vw_send: To DATATAKING: acvlbical off 2011-Dec-20 03:17:54 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2011-Dec-20 03:17:54 STOP finish_task: Finishing task 'selecting receiver ALFA' 2011-Dec-20 03:17:54 LOG5 finish_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Dec-20 03:17:54 INFO2 finish_task: DONE finished selecting: receiver ALFA 2011-Dec-20 03:17:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 03:17:54 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2011-Dec-20 03:17:54 LOG5 end_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Dec-20 03:17:54 START begin_task: Starting task 'waiting for receiver ALFA' 2011-Dec-20 03:17:54 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2011-Dec-20 03:17:54 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2011-Dec-20 03:17:54 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2011-Dec-20 03:17:54 INFO1 config_iflo: Configuring rest of the IF/LO path 2011-Dec-20 03:17:54 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2011-Dec-20 03:17:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-20 03:17:54 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-20 03:17:54 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-20 03:17:54 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2011-Dec-20 03:17:54 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-20 03:17:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-20 03:17:54 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2011-Dec-20 03:17:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-20 03:17:54 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-20 03:17:54 LOG3 vw_send: To DATATAKING: alfafb 1 2011-Dec-20 03:17:54 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2011-Dec-20 03:17:54 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2011-Dec-20 03:17:54 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2011-Dec-20 03:17:54 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2011-Dec-20 03:17:54 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2011-Dec-20 03:17:54 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2011-Dec-20 03:17:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2011-Dec-20 03:17:54 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2011-Dec-20 03:17:54 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2011-Dec-20 03:17:54 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2011-Dec-20 03:17:54 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2011-Dec-20 03:17:54 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2011-Dec-20 03:17:54 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2011-Dec-20 03:17:54 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2011-Dec-20 03:17:54 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2011-Dec-20 03:17:55 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2011-Dec-20 03:17:55 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2011-Dec-20 03:17:55 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2011-Dec-20 03:17:55 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2011-Dec-20 03:17:55 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2011-Dec-20 03:17:55 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2011-Dec-20 03:17:55 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2011-Dec-20 03:17:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 03:17:55 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2011-Dec-20 03:17:55 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2011-Dec-20 03:17:55 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2011-Dec-20 03:17:55 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2011-Dec-20 03:17:55 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2011-Dec-20 03:17:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2011-Dec-20 03:17:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 03:17:55 START begin_task: Starting task 'waiting on configuring IF/LO path' 2011-Dec-20 03:17:55 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2011-Dec-20 03:17:55 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2011-Dec-20 03:17:55 LOG4 got_cormsg: From DATATAKING: acvlbical off 2011-Dec-20 03:17:55 LOG4 got_cormsg: From DATATAKING: alfafb 1 2011-Dec-20 03:17:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2011-Dec-20 03:17:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2011-Dec-20 03:17:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2011-Dec-20 03:17:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2011-Dec-20 03:17:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2011-Dec-20 03:17:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2011-Dec-20 03:17:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2011-Dec-20 03:17:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2011-Dec-20 03:17:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2011-Dec-20 03:17:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2011-Dec-20 03:17:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2011-Dec-20 03:17:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2011-Dec-20 03:17:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2011-Dec-20 03:17:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2011-Dec-20 03:17:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 03:17:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2011-Dec-20 03:17:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2011-Dec-20 03:17:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2011-Dec-20 03:17:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2011-Dec-20 03:17:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 03:18:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:18:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:18:02 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:18:02 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:18:02 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:18:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:18:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:18:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:18:08 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:18:08 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:18:08 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:18:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:18:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:18:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:18:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:18:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:18:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:18:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:18:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:18:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:18:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:18:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:18:10 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-20 03:18:10 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2011-Dec-20 03:18:10 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2011-Dec-20 03:18:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2011-Dec-20 03:18:10 STOP finish_task: Finishing task 'configuring IF/LO path' 2011-Dec-20 03:18:10 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Dec-20 03:18:10 DONE finish_task: DONE finished configuration: IF/LO path 2011-Dec-20 03:18:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-20 03:18:10 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2011-Dec-20 03:18:10 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Dec-20 03:18:11 BEGIN begin_task: Starting task 'configuring WAPPs' 2011-Dec-20 03:18:11 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2011-Dec-20 03:18:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2011-Dec-20 03:18:11 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2011-Dec-20 03:18:11 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Dec-20 03:18:11 START begin_task: Starting task 'selecting calibration port' 2011-Dec-20 03:18:11 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2011-Dec-20 03:18:11 LOG3 vw_send: To DATATAKING: calport 3 2011-Dec-20 03:18:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Dec-20 03:18:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 03:18:11 START begin_task: Starting task 'waiting on calport' 2011-Dec-20 03:18:11 LOG5 begin_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2011-Dec-20 03:18:11 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:18:11 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Dec-20 03:18:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 03:18:11 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:18:11 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-20 03:18:11 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Dec-20 03:18:11 LOG5 end_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2011-Dec-20 03:18:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Dec-20 03:18:11 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Dec-20 03:18:11 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2011-Dec-20 03:18:11 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-20 03:18:11 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-20 03:18:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-20 03:18:11 LOG5 begin_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2011-Dec-20 03:18:11 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-20 03:18:11 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:18:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-20 03:18:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-20 03:18:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-20 03:18:11 LOG5 end_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2011-Dec-20 03:18:11 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2011-Dec-20 03:18:11 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2011-Dec-20 03:18:11 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2011-Dec-20 03:18:11 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2011-Dec-20 03:18:11 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2011-Dec-20 03:18:11 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2011-Dec-20 03:18:11 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2011-Dec-20 03:18:11 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2011-Dec-20 03:18:11 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ep 2011-Dec-20 03:18:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ep 2011-Dec-20 03:18:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ep 2011-Dec-20 03:18:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ep 2011-Dec-20 03:18:11 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Dec-20 03:18:11 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Dec-20 03:18:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-20 03:18:11 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2011-Dec-20 03:18:11 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-20 03:18:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-20 03:18:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-20 03:18:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-20 03:18:11 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2011-Dec-20 03:18:11 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ep 2011-Dec-20 03:18:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ep 2011-Dec-20 03:18:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ep 2011-Dec-20 03:18:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ep 2011-Dec-20 03:18:12 STOP finish_task: Finishing task 'configuring WAPPs' 2011-Dec-20 03:18:12 LOG5 finish_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2011-Dec-20 03:18:12 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2011-Dec-20 03:18:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-20 03:18:12 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2011-Dec-20 03:18:12 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2011-Dec-20 03:18:12 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2011-Dec-20 03:18:12 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2011-Dec-20 03:18:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2011-Dec-20 03:18:12 INFO1 config_mock: Starting to configure the Mock spectrometer 2011-Dec-20 03:18:12 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Dec-20 03:18:12 START begin_task: Starting task 'selecting calibration port' 2011-Dec-20 03:18:12 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2011-Dec-20 03:18:12 LOG3 vw_send: To DATATAKING: calport 3 2011-Dec-20 03:18:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Dec-20 03:18:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 03:18:12 START begin_task: Starting task 'waiting on calport' 2011-Dec-20 03:18:12 LOG5 begin_task: Level: (4) ID = <10015> Status = 0 0 0 0 ok 2011-Dec-20 03:18:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ep' 2011-Dec-20 03:18:12 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Dec-20 03:18:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2011-Dec-20 03:18:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2011-Dec-20 03:18:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 03:18:12 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:18:12 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-20 03:18:12 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Dec-20 03:18:12 LOG5 end_task: Level: (4) ID = <10015> Status = 0 0 0 0 ok 2011-Dec-20 03:18:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Dec-20 03:18:12 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Dec-20 03:18:12 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2011-Dec-20 03:18:12 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-20 03:18:12 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-20 03:18:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-20 03:18:12 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2011-Dec-20 03:18:12 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:18:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ep' 2011-Dec-20 03:18:12 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-20 03:18:12 NOTE WAPPDATA-new_file: New FITS file: wapp.20111220.a2048.0001.fits 2011-Dec-20 03:18:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-20 03:18:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-20 03:18:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-20 03:18:12 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2011-Dec-20 03:18:12 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Dec-20 03:18:12 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Dec-20 03:18:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-20 03:18:12 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2011-Dec-20 03:18:12 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20111220.a2048.0001.fits} 2011-Dec-20 03:18:13 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-20 03:18:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-20 03:18:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-20 03:18:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-20 03:18:13 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2011-Dec-20 03:18:13 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2011-Dec-20 03:18:13 LOG3 socket_wait: To MOCK: NOP 2011-Dec-20 03:18:13 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2011-Dec-20 03:18:13 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2011-Dec-20 03:18:13 ALERT got_mock_message: Mock spectrometer restarting 2011-Dec-20 03:18:13 LOG4 from_mock: From MOCK: nop ok 2011-Dec-20 03:18:13 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2011-Dec-20 03:18:13 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2011-Dec-20 03:18:13 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2011-Dec-20 03:18:13 LOG2 config_mock: Mock spectrometer configuration group 1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2011-Dec-20 03:18:13 LOG2 config_mock: Mock spectrometer configuration group 1 (0): datatype=AB 2011-Dec-20 03:18:13 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bits=32 2011-Dec-20 03:18:13 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bwmhz=172.032 2011-Dec-20 03:18:13 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevif1hz=250000000 2011-Dec-20 03:18:13 LOG2 config_mock: Mock spectrometer configuration group 1 (0): digfreqoffhz=0.0 2011-Dec-20 03:18:13 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fftlen=8192 2011-Dec-20 03:18:13 LOG2 config_mock: Mock spectrometer configuration group 1 (0): dumptmsec=1.0 2011-Dec-20 03:18:13 LOG2 config_mock: Mock spectrometer configuration group 1 (0): blankatod=1 2011-Dec-20 03:18:13 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskadc=13 2011-Dec-20 03:18:13 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskpfb=0 2011-Dec-20 03:18:13 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskacc=0 2011-Dec-20 03:18:13 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskash=0 2011-Dec-20 03:18:13 LOG2 config_mock: Mock spectrometer configuration group 1 (0): adcclkhz=172032000 2011-Dec-20 03:18:13 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevlohz=175000000 325000000 2011-Dec-20 03:18:13 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fileprefix=a2048 2011-Dec-20 03:18:13 LOG2 config_mock: Mock spectrometer configuration group 1 (0): maxfilesizemb=2048 2011-Dec-20 03:18:13 LOG2 config_mock: Mock spectrometer configuration group 1 (0): calctl=c0 2011-Dec-20 03:18:13 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group 1' using string 'conf' 2011-Dec-20 03:18:13 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bits=32:bwmhz=172.032:pdevif1hz=250000000:digfreqoffhz=0.0:fftlen=8192:dumptmsec=1.0:blankatod=1:emaskadc=13:emaskpfb=0:emaskacc=0:emaskash=0:adcclkhz=172032000:pdevlohz=175000000 325000000:fileprefix=a2048:maxfilesizemb=2048:calctl=c0 2011-Dec-20 03:18:13 START begin_task: Starting task 'waiting on configure Mock spectrometer group 1' 2011-Dec-20 03:18:13 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2011-Dec-20 03:18:13 LOG4 from_mock: From MOCK: confok 2011-Dec-20 03:18:13 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group 1' with status 'OK' 2011-Dec-20 03:18:13 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2011-Dec-20 03:18:13 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group 1' 2011-Dec-20 03:18:13 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group 2' using string 'conf' 2011-Dec-20 03:18:13 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2011-Dec-20 03:18:13 START begin_task: Starting task 'waiting on disable Mock spectrometer group 2' 2011-Dec-20 03:18:13 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2011-Dec-20 03:18:13 LOG4 from_mock: From MOCK: confok 2011-Dec-20 03:18:13 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group 2' with status 'OK' 2011-Dec-20 03:18:13 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2011-Dec-20 03:18:13 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group 2' 2011-Dec-20 03:18:13 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2011-Dec-20 03:18:13 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2011-Dec-20 03:18:13 DONE finish_task: DONE finished configuring: the Mock spectrometer 2011-Dec-20 03:18:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-20 03:18:13 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2011-Dec-20 03:18:13 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2011-Dec-20 03:18:13 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2011-Dec-20 03:18:13 COMMAND run_command_line: EXECUTING command 5: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2011-Dec-20 03:18:13 COMMAND run_command_line: EXECUTING command 6: 'CATALOG AGESFull.cat' 2011-Dec-20 03:18:13 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2011-Dec-20 03:18:13 COMMAND run_command_line: EXECUTING command 9: 'IF LSTSLEW(AGES3193_p3_022) < 085341 THEN' 2011-Dec-20 03:18:14 LOG3 is_if_valid: Current source data: up 249.9 16.7 UP - - 150 5.1 2011-Dec-20 03:18:14 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_022) < 085341 2011-Dec-20 03:18:14 INFO5 is_if_valid: Condition parsed as: 8.8404730000000011 < 8.8947222222222209 2011-Dec-20 03:18:14 COMMAND run_command_line: EXECUTING command 10: 'FIXEDDRIFT az=248.00 alfaangle=-51.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_022 ra=95300.00 dec=232130.00' 2011-Dec-20 03:18:14 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-20 03:18:14 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-20 03:18:14 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 248.00 -51.6 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_022 95300.00 232130.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-20 03:18:14 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-20 03:18:14 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2011-Dec-20 03:18:14 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AUDSGAL2577' 2011-Dec-20 03:18:14 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-20 03:18:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_022} 2011-Dec-20 03:18:14 INFO3 fixed_driftmap: Sending telescope to Az = 248.00 and ZA = 14.85 2011-Dec-20 03:18:15 LOG3 track_source: Calling 'track_source AGES3193_p3_022 248.00 14.8538817593 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-20 03:18:15 START begin_task: Starting task 'sending tracking commands' 2011-Dec-20 03:18:15 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2011-Dec-20 03:18:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_022} INFO {Slewing to source 'AGES3193_p3_022' ...} 2011-Dec-20 03:18:15 INFO1 track_source: Starting to track AGES3193_p3_022 2011-Dec-20 03:18:15 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_022" 2011-Dec-20 03:18:15 LOG3 vw_send: To DATATAKING: set ra 248.00 2011-Dec-20 03:18:15 LOG3 vw_send: To DATATAKING: set dec 14.8538817593 2011-Dec-20 03:18:15 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-20 03:18:15 LOG3 vw_send: To DATATAKING: pnt tr 248.00 14.8538817593 -CF 2011-Dec-20 03:18:15 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 03:18:15 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-20 03:18:15 LOG5 finish_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2011-Dec-20 03:18:15 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-20 03:18:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 03:18:15 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-20 03:18:15 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2011-Dec-20 03:18:15 START begin_task: Starting task 'rotate ALFA to -51.6 degrees' 2011-Dec-20 03:18:15 LOG5 begin_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2011-Dec-20 03:18:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -51.6 degrees ...} 2011-Dec-20 03:18:15 INFO2 rotate_alfa: ALFA commanded to -51.6 degrees 2011-Dec-20 03:18:15 LOG3 sock_errsend: To ALFAMOTOR: POSITION -51.6 REPLY 2011-Dec-20 03:18:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-20 03:18:15 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-20 03:18:15 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2011-Dec-20 03:18:15 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_022" 2011-Dec-20 03:18:15 LOG4 got_cormsg: From DATATAKING: set ra 248.00 2011-Dec-20 03:18:15 LOG4 got_cormsg: From DATATAKING: set dec 14.8538817593 2011-Dec-20 03:18:15 LOG4 got_cormsg: From DATATAKING: vw% 248.00 2011-Dec-20 03:18:15 LOG4 got_cormsg: From DATATAKING: vw% 14.8538817593 2011-Dec-20 03:18:15 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:18:15 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-20 03:18:15 LOG4 got_cormsg: From DATATAKING: pnt tr 248.00 14.8538817593 -CF 2011-Dec-20 03:18:15 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 03:18:15 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-20 03:18:15 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:19:21 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-20 03:19:21 INFO3 alfa_motor: ALFA rotator in-position -51.60 degrees 2011-Dec-20 03:19:21 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-20 03:19:21 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2011-Dec-20 03:19:21 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-20 03:19:21 STOP finish_task: Finishing task 'rotate ALFA to -51.6 degrees' 2011-Dec-20 03:19:21 LOG5 finish_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2011-Dec-20 03:19:21 INFO2 finish_task: DONE finished configuration: rotating ALFA to -51.6 degrees 2011-Dec-20 03:19:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 03:19:21 STOP end_task: Finishing task 'rotate ALFA to -51.6 degrees' with status 'OK' 2011-Dec-20 03:19:21 LOG5 end_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2011-Dec-20 03:19:21 START begin_task: Starting task 'waiting on telescope' 2011-Dec-20 03:19:21 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2011-Dec-20 03:19:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-20 03:19:21 LOG3 waittrk: Start waittrk 5 2011-Dec-20 03:19:21 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-20 03:19:21 LOG5 begin_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2011-Dec-20 03:19:26 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-20 03:19:26 LOG5 end_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2011-Dec-20 03:19:26 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-20 03:19:26 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2011-Dec-20 03:23:20 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-20 03:23:20 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2011-Dec-20 03:23:20 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-20 03:23:20 INFO2 waittrk: Now tracking AGES3193_p3_022 2011-Dec-20 03:23:20 LOG4 waittrk: Current telescope position: Az = 247.56 ZA = 14.86 2011-Dec-20 03:23:20 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-20 03:23:20 LOG5 finish_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2011-Dec-20 03:23:20 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-20 03:23:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 03:23:21 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-20 03:23:21 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2011-Dec-20 03:23:21 START begin_task: Starting task 'selecting calibration type' 2011-Dec-20 03:23:21 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2011-Dec-20 03:23:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-20 03:23:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-20 03:23:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 03:23:21 START begin_task: Starting task 'waiting on setcal' 2011-Dec-20 03:23:21 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2011-Dec-20 03:23:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-20 03:23:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 03:23:21 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:23:21 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-20 03:23:21 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-20 03:23:21 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2011-Dec-20 03:23:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-20 03:23:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-20 03:23:21 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-20 03:23:21 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-20 03:23:21 LOG5 begin_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2011-Dec-20 03:23:21 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:23:21 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-20 03:23:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-20 03:23:21 LOG5 end_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2011-Dec-20 03:23:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-20 03:23:21 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-20 03:23:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-20 03:23:21 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-20 03:23:21 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-20 03:23:21 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2011-Dec-20 03:23:21 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-20 03:23:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-20 03:23:21 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2011-Dec-20 03:23:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-20 03:23:21 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-20 03:23:21 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-20 03:23:21 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2011-Dec-20 03:23:21 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Dec-20 03:23:21 INFO2 astwait: Waiting for 134 seconds from 07:23:21 to 07:25:35 UTC ... 2011-Dec-20 03:23:21 LOG4 send_obs_status: To obs_status: <1> TASKTIME 134 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-20 03:23:21 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Dec-20 03:23:21 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2011-Dec-20 03:25:35 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Dec-20 03:25:35 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2011-Dec-20 03:25:35 INFO3 astwait: Finished waiting 2011-Dec-20 03:25:35 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-20 03:25:35 LOG5 dopset_later: Calling 'dopset_later 60.575003063487465' 2011-Dec-20 03:25:35 INFO3 dopset_later: Setting Doppler correction for 03:26:35 (60.6 seconds from now) 2011-Dec-20 03:25:35 LOG5 antvel: Calling 'antvel 248.000000 14.853882 F Heliocentric 60.575003063487465' 2011-Dec-20 03:25:35 LOG2 antvel: Transforming current Az = 248.00 ZA = 14.85 to apparent RA = 09:53:42.1 Dec = +23:17:51.7 2011-Dec-20 03:25:35 LOG2 antvel: Parameters to Doppler: Heliocentric 26795 2011 354 0.0 2011-Dec-20 03:25:35 INFO5 antvel: Computed antenna velocity: -24.32965 km/s 2011-Dec-20 03:25:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-24.329654424400001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-20 03:25:35 INFO4 dopset_gen: New sky frequencies: 1381.355532 1381.355532 1381.355532 1381.355532 1381.355532 1381.355532 1381.355532 1381.355532 1381.355532 2011-Dec-20 03:25:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.355532 sky0=1381.355532 sky1=1381.355532 sky2=1381.355532 sky3=1381.355532 sky4=1381.355532 sky5=1381.355532 sky6=1381.355532 sky7=1381.355532 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-20 03:25:35 LOG2 dopset_gen: Result from 'sky2syn': 1631.355532 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-20 03:25:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631355532.0} 2011-Dec-20 03:25:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 03:25:35 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-20 03:25:35 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-20 03:25:35 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:04.0 Dec = +23:21:15.3 2011-Dec-20 03:25:35 LOG3 track_source: Calling 'track_source AGES3193_p3_022 095204.0 232115.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-20 03:25:35 START begin_task: Starting task 'sending tracking commands' 2011-Dec-20 03:25:35 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2011-Dec-20 03:25:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_022} INFO {Slewing to source 'AGES3193_p3_022' ...} 2011-Dec-20 03:25:35 INFO1 track_source: Starting to track AGES3193_p3_022 2011-Dec-20 03:25:35 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_022" 2011-Dec-20 03:25:35 LOG3 vw_send: To DATATAKING: set ra 095204.0 2011-Dec-20 03:25:35 LOG3 vw_send: To DATATAKING: set dec 232115.3 2011-Dec-20 03:25:35 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-20 03:25:35 LOG3 vw_send: To DATATAKING: pnt tr 095204.0 232115.3 -CJ 2011-Dec-20 03:25:35 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 03:25:35 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-20 03:25:35 LOG5 finish_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2011-Dec-20 03:25:35 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-20 03:25:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 03:25:35 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-20 03:25:35 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2011-Dec-20 03:25:35 START begin_task: Starting task 'waiting on telescope' 2011-Dec-20 03:25:35 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2011-Dec-20 03:25:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-20 03:25:35 LOG3 waittrk: Start waittrk 5 2011-Dec-20 03:25:35 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-20 03:25:35 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2011-Dec-20 03:25:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631355532.0} 2011-Dec-20 03:25:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 03:25:35 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:25:35 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_022" 2011-Dec-20 03:25:35 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:25:35 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:25:35 LOG4 got_cormsg: From DATATAKING: set ra 095204.0 2011-Dec-20 03:25:35 LOG4 got_cormsg: From DATATAKING: set dec 232115.3 2011-Dec-20 03:25:35 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-20 03:25:35 LOG4 got_cormsg: From DATATAKING: pnt tr 095204.0 232115.3 -CJ 2011-Dec-20 03:25:35 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 03:25:35 LOG4 got_cormsg: From DATATAKING: 095204.0 2011-Dec-20 03:25:35 LOG4 got_cormsg: From DATATAKING: vw% 232115.3 2011-Dec-20 03:25:35 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2011-Dec-20 03:25:40 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-20 03:25:40 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2011-Dec-20 03:25:40 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-20 03:25:40 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2011-Dec-20 03:25:42 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-20 03:25:42 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2011-Dec-20 03:25:42 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-20 03:25:42 INFO2 waittrk: Now tracking AGES3193_p3_022 2011-Dec-20 03:25:42 LOG4 waittrk: Current telescope position: Az = 247.56 ZA = 14.85 2011-Dec-20 03:25:42 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-20 03:25:42 LOG5 finish_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2011-Dec-20 03:25:42 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-20 03:25:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 03:25:42 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-20 03:25:42 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2011-Dec-20 03:25:42 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-20 03:25:42 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2011-Dec-20 03:25:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-20 03:25:42 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-20 03:25:42 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-20 03:25:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-20 03:25:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 03:25:42 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-20 03:25:42 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2011-Dec-20 03:25:42 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-20 03:25:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 03:25:44 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:25:44 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-20 03:25:44 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-20 03:25:44 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2011-Dec-20 03:25:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-20 03:25:44 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-20 03:25:44 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2011-Dec-20 03:25:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-20 03:25:44 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-20 03:25:44 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-20 03:25:44 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-20 03:25:44 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-20 03:25:44 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-20 03:25:44 LOG5 begin_task: Level: (5) ID = <10040> Status = 0 0 0 0 ok 2011-Dec-20 03:25:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-20 03:25:44 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:25:44 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 8 6 dB 2011-Dec-20 03:25:44 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 3 4 dB 2011-Dec-20 03:25:45 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 3 dB 2011-Dec-20 03:25:45 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2011-Dec-20 03:25:45 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-20 03:25:45 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-20 03:25:45 LOG5 end_task: Level: (5) ID = <10040> Status = 0 0 0 0 ok 2011-Dec-20 03:25:45 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.910 0.910 ALFA beam 1: 0.974 0.971 2011-Dec-20 03:25:45 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.985 1.014 ALFA beam 3: 0.919 0.931 2011-Dec-20 03:25:45 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.861 0.941 ALFA beam 5: 1.010 0.920 2011-Dec-20 03:25:45 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.979 0.014 ALFA beam 7: 1.067 0.014 2011-Dec-20 03:25:45 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-20 03:25:45 LOG5 finish_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2011-Dec-20 03:25:45 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-20 03:25:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 03:25:45 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-20 03:25:45 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2011-Dec-20 03:25:45 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-20 03:25:45 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2011-Dec-20 03:25:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-20 03:25:45 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-20 03:25:45 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-20 03:25:45 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-20 03:25:45 LOG5 begin_task: Level: (5) ID = <10042> Status = 0 0 0 0 ok 2011-Dec-20 03:25:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:25:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.910 0.910 0.974 0.971 2011-Dec-20 03:25:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.985 1.014 0.919 0.931 2011-Dec-20 03:25:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.861 0.941 1.010 0.920 2011-Dec-20 03:25:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.979 0.014 1.067 0.014 2011-Dec-20 03:25:50 INFO3 from_mock: From MOCK: b0s0g0 rms:A 32.3 28.4 B 31.2 31.3 mn:A 0.1 0.0 B -0.1 -0.3 gn: 11 11 2011-Dec-20 03:25:50 INFO3 from_mock: From MOCK: b0s1g0 rms:A 28.8 27.5 B 29.1 30.9 mn:A 0.1 -0.5 B -0.6 0.2 gn: 11 11 2011-Dec-20 03:25:50 INFO3 from_mock: From MOCK: b1s0g0 rms:A 31.8 29.7 B 33.8 29.6 mn:A 0.8 0.8 B 0.1 -0.1 gn: 7 11 2011-Dec-20 03:25:50 INFO3 from_mock: From MOCK: b1s1g0 rms:A 31.2 28.7 B 28.7 28.8 mn:A -0.3 -0.4 B 0.5 0.1 gn: 8 9 2011-Dec-20 03:25:50 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.7 28.8 B 28.6 29.9 mn:A -0.0 -0.3 B 0.3 -0.1 gn: 10 11 2011-Dec-20 03:25:50 INFO3 from_mock: From MOCK: b2s1g0 rms:A 30.7 31.0 B 29.6 27.5 mn:A 0.3 -0.3 B -0.0 0.1 gn: 11 11 2011-Dec-20 03:25:50 INFO3 from_mock: From MOCK: b3s0g0 rms:A 30.2 29.9 B 32.0 28.5 mn:A 0.5 -0.2 B 0.1 -0.3 gn: 12 12 2011-Dec-20 03:25:50 INFO3 from_mock: From MOCK: b3s1g0 rms:A 31.5 30.8 B 30.5 31.8 mn:A -0.3 0.3 B 0.1 0.0 gn: 12 12 2011-Dec-20 03:25:50 INFO3 from_mock: From MOCK: b4s0g0 rms:A 31.2 30.2 B 28.8 28.9 mn:A -0.3 -0.4 B -0.4 0.0 gn: 13 11 2011-Dec-20 03:25:50 INFO3 from_mock: From MOCK: b4s1g0 rms:A 33.3 30.2 B 31.5 30.4 mn:A -0.1 -0.1 B -0.3 0.2 gn: 16 13 2011-Dec-20 03:25:50 INFO3 from_mock: From MOCK: b5s0g0 rms:A 30.5 29.4 B 28.5 28.5 mn:A 0.5 0.5 B -0.1 0.5 gn: 12 10 2011-Dec-20 03:25:50 INFO3 from_mock: From MOCK: b5s1g0 rms:A 30.7 30.5 B 28.7 28.4 mn:A -0.4 0.3 B -0.1 0.2 gn: 12 10 2011-Dec-20 03:25:50 INFO3 from_mock: From MOCK: b6s0g0 rms:A 30.9 28.2 B 14.3 14.8 mn:A -0.5 0.1 B 0.4 -0.5 gn: 12 31 2011-Dec-20 03:25:50 INFO3 from_mock: From MOCK: b6s1g0 rms:A 31.2 28.4 B 11.3 11.0 mn:A 0.6 0.5 B 0.0 0.1 gn: 13 31 2011-Dec-20 03:25:50 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-20 03:25:50 LOG5 end_task: Level: (5) ID = <10042> Status = 0 0 0 0 ok 2011-Dec-20 03:25:50 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-20 03:25:50 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-20 03:25:50 LOG5 finish_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2011-Dec-20 03:25:50 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-20 03:25:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 03:25:51 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-20 03:25:51 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2011-Dec-20 03:25:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-20 03:25:51 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-20 03:25:51 LOG5 finish_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2011-Dec-20 03:25:51 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-20 03:25:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 03:25:51 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-20 03:25:51 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2011-Dec-20 03:25:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ep 2011-Dec-20 03:25:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ep 2011-Dec-20 03:25:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ep 2011-Dec-20 03:25:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ep 2011-Dec-20 03:25:51 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20111220.a2048.0001.fits' is empty! 2011-Dec-20 03:25:51 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-20 03:25:51 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-20 03:25:51 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2011-Dec-20 03:25:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-20 03:25:51 START begin_task: Starting task 'selecting calibration type' 2011-Dec-20 03:25:51 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2011-Dec-20 03:25:51 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-20 03:25:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-20 03:25:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 03:25:51 START begin_task: Starting task 'waiting on setcal' 2011-Dec-20 03:25:51 LOG5 begin_task: Level: (5) ID = <10045> Status = 0 0 0 0 ok 2011-Dec-20 03:25:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ep' 2011-Dec-20 03:25:51 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-20 03:25:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 03:25:51 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:25:51 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-20 03:25:51 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-20 03:25:51 LOG5 end_task: Level: (5) ID = <10045> Status = 0 0 0 0 ok 2011-Dec-20 03:25:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-20 03:25:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-20 03:25:51 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-20 03:25:51 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-20 03:25:51 LOG5 begin_task: Level: (5) ID = <10046> Status = 0 0 0 0 ok 2011-Dec-20 03:25:51 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:25:51 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-20 03:25:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-20 03:25:51 LOG5 end_task: Level: (5) ID = <10046> Status = 0 0 0 0 ok 2011-Dec-20 03:25:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-20 03:25:51 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-20 03:25:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-20 03:25:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-20 03:25:51 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-20 03:25:51 LOG5 begin_task: Level: (5) ID = <10047> Status = 0 0 0 0 ok 2011-Dec-20 03:25:51 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-20 03:25:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-20 03:25:51 LOG5 end_task: Level: (5) ID = <10047> Status = 0 0 0 0 ok 2011-Dec-20 03:25:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-20 03:25:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-20 03:25:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-20 03:25:51 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2011-Dec-20 03:25:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-20 03:25:51 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-20 03:25:51 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-20 03:25:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-20 03:25:51 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2011-Dec-20 03:25:51 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-20 03:25:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-20 03:25:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-20 03:25:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-20 03:25:51 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2011-Dec-20 03:25:51 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-20 03:25:51 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-20 03:25:51 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2011-Dec-20 03:25:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-20 03:25:51 LOG5 log_alfabeam: Parameters: 9.8677777777777784 23.354249999999997 8.883043 2011.9695905582173 -51.600071 2011-Dec-20 03:25:51 LOG4 log_alfabeam: ALFABEAM 0 9.867777777777780 23.354250000000000 2011-Dec-20 03:25:51 LOG4 log_alfabeam: ALFABEAM 1 9.868566072373648 23.263183418020798 2011-Dec-20 03:25:51 LOG4 log_alfabeam: ALFABEAM 2 9.874776488097460 23.323618541409573 2011-Dec-20 03:25:51 LOG4 log_alfabeam: ALFABEAM 3 9.873965051179679 23.415235171074197 2011-Dec-20 03:25:51 LOG4 log_alfabeam: ALFABEAM 4 9.866946924285932 23.445338173404842 2011-Dec-20 03:25:51 LOG4 log_alfabeam: ALFABEAM 5 9.860774194858365 23.384149695224529 2011-Dec-20 03:25:51 LOG4 log_alfabeam: ALFABEAM 6 9.861581751194665 23.293610589496591 2011-Dec-20 03:25:52 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-20 03:25:52 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-20 03:25:52 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-20 03:25:52 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_022 2011-Dec-20 03:25:52 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-20 03:25:52 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-20 03:25:52 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-20 03:25:52 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-20 03:25:52 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-20 03:25:52 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-20 03:25:52 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-20 03:25:52 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-20 03:25:52 LOG3 take_mock_data: PSET configuration: patternid=135400061 2011-Dec-20 03:25:52 LOG3 take_mock_data: PSET configuration: scanid=135400061 2011-Dec-20 03:25:52 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-20 03:25:52 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-20 03:25:52 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-20 03:25:52 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456355532.0 2011-Dec-20 03:25:52 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306355532.0 2011-Dec-20 03:25:52 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-20 03:25:52 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-20 03:25:52 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_022:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=135400061:scanid=135400061:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456355532.0:topobfreqhz=1306355532.0:filetype=1 2011-Dec-20 03:25:52 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-20 03:25:52 LOG5 begin_task: Level: (5) ID = <10050> Status = 0 0 0 0 ok 2011-Dec-20 03:25:52 LOG4 from_mock: From MOCK: psetok 2011-Dec-20 03:25:52 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-20 03:25:52 LOG5 end_task: Level: (5) ID = <10050> Status = 0 0 0 0 ok 2011-Dec-20 03:25:52 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-20 03:25:52 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-20 03:25:52 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-20 03:25:52 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-20 03:25:52 LOG5 begin_task: Level: (5) ID = <10051> Status = 0 0 0 0 ok 2011-Dec-20 03:25:52 LOG4 from_mock: From MOCK: starok 2011-Dec-20 03:25:52 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-20 03:25:52 LOG5 end_task: Level: (5) ID = <10051> Status = 0 0 0 0 ok 2011-Dec-20 03:25:52 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-20 03:25:52 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135400061 2011-Dec-20 03:25:52 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-20 03:25:52 LOG5 begin_task: Level: (5) ID = <10052> Status = 0 0 0 0 ok 2011-Dec-20 03:25:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-20 03:25:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-20 03:25:52 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-20 03:25:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26753.00 2011-Dec-20 03:25:52 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-20 03:25:54 INFO2 got_mock_message: Mock spectrometer start file number is 00000 2011-Dec-20 03:25:54 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-20 03:25:54 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-20 03:25:54 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-20 03:25:54 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-20 03:25:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-20 03:25:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-20 03:25:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-20 03:25:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-20 03:25:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-20 03:25:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-20 03:25:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-20 03:25:54 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-20 03:25:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 03:25:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 03:25:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 03:25:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 03:25:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 03:25:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 03:25:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 03:25:57 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:25:57.01 2011-Dec-20 03:25:57 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324365957.01 Tue Dec 20 03:25:57 2011 2011-Dec-20 03:25:57 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-20 03:25:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.355532 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-20 03:25:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.355532 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2011-Dec-20 03:25:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.355532 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2011-Dec-20 03:25:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.355532 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2011-Dec-20 03:25:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.355532 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2011-Dec-20 03:25:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.355532 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 03:25:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.355532 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 03:25:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.355532 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 03:25:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.355532 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 03:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.314 (still bad) 2011-Dec-20 03:25:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-20 03:26:03 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-20 03:26:03 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-20 03:26:03 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-20 03:26:03 LOG5 end_task: Level: (5) ID = <10052> Status = 0 0 0 0 ok 2011-Dec-20 03:26:03 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-20 03:26:03 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2011-Dec-20 03:26:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-20 03:26:03 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-20 03:26:03 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-20 03:26:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-20 03:26:03 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2011-Dec-20 03:26:03 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-20 03:26:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-20 03:26:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-20 03:26:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-20 03:26:03 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2011-Dec-20 03:26:03 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-20 03:26:03 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-20 03:26:03 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2011-Dec-20 03:26:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-20 03:26:03 LOG5 log_alfabeam: Parameters: 9.8677777777777784 23.354249999999997 8.886107 2011.9695909067862 -51.600071 2011-Dec-20 03:26:03 LOG4 log_alfabeam: ALFABEAM 0 9.867777777777777 23.354250000000008 2011-Dec-20 03:26:03 LOG4 log_alfabeam: ALFABEAM 1 9.868573426517813 23.263195688994088 2011-Dec-20 03:26:03 LOG4 log_alfabeam: ALFABEAM 2 9.874778978803631 23.323725740561969 2011-Dec-20 03:26:03 LOG4 log_alfabeam: ALFABEAM 3 9.873960058147551 23.415331296764695 2011-Dec-20 03:26:03 LOG4 log_alfabeam: ALFABEAM 4 9.866939439599729 23.445325307496685 2011-Dec-20 03:26:03 LOG4 log_alfabeam: ALFABEAM 5 9.860771763704539 23.384040526211095 2011-Dec-20 03:26:03 LOG4 log_alfabeam: ALFABEAM 6 9.861586674562254 23.293515474817347 2011-Dec-20 03:26:03 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-20 03:26:03 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-20 03:26:03 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-20 03:26:03 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_022 2011-Dec-20 03:26:03 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-20 03:26:03 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-20 03:26:03 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-20 03:26:03 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-20 03:26:03 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-20 03:26:03 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-20 03:26:03 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-20 03:26:03 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-20 03:26:03 LOG3 take_mock_data: PSET configuration: patternid=135400061 2011-Dec-20 03:26:03 LOG3 take_mock_data: PSET configuration: scanid=135400062 2011-Dec-20 03:26:03 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-20 03:26:03 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-20 03:26:03 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-20 03:26:03 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456355532.0 2011-Dec-20 03:26:03 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306355532.0 2011-Dec-20 03:26:03 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-20 03:26:03 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-20 03:26:03 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_022:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=135400061:scanid=135400062:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456355532.0:topobfreqhz=1306355532.0:filetype=1 2011-Dec-20 03:26:03 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-20 03:26:03 LOG5 begin_task: Level: (5) ID = <10055> Status = 0 0 0 0 ok 2011-Dec-20 03:26:03 LOG4 from_mock: From MOCK: psetok 2011-Dec-20 03:26:03 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-20 03:26:03 LOG5 end_task: Level: (5) ID = <10055> Status = 0 0 0 0 ok 2011-Dec-20 03:26:03 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-20 03:26:03 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-20 03:26:03 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-20 03:26:03 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-20 03:26:03 LOG5 begin_task: Level: (5) ID = <10056> Status = 0 0 0 0 ok 2011-Dec-20 03:26:03 LOG4 from_mock: From MOCK: starok 2011-Dec-20 03:26:03 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-20 03:26:03 LOG5 end_task: Level: (5) ID = <10056> Status = 0 0 0 0 ok 2011-Dec-20 03:26:03 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-20 03:26:03 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135400062 2011-Dec-20 03:26:03 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-20 03:26:03 LOG5 begin_task: Level: (5) ID = <10057> Status = 0 0 0 0 ok 2011-Dec-20 03:26:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-20 03:26:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-20 03:26:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26764.00 2011-Dec-20 03:26:04 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-20 03:26:04 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-20 03:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.479 (still bad) 2011-Dec-20 03:26:06 INFO2 got_mock_message: Mock spectrometer start file number is 00100 2011-Dec-20 03:26:06 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-20 03:26:06 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-20 03:26:06 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-20 03:26:06 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-20 03:26:06 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-20 03:26:06 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-20 03:26:06 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-20 03:26:06 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-20 03:26:06 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-20 03:26:06 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-20 03:26:06 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-20 03:26:06 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-20 03:26:06 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 03:26:06 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 03:26:06 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 03:26:06 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 03:26:06 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 03:26:06 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 03:26:06 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 03:26:09 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:26:09.01 2011-Dec-20 03:26:09 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324365969.01 Tue Dec 20 03:26:09 2011 2011-Dec-20 03:26:09 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-20 03:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.355532 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-20 03:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.355532 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2011-Dec-20 03:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.355532 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2011-Dec-20 03:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.355532 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2011-Dec-20 03:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.355532 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2011-Dec-20 03:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.355532 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 03:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.355532 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 03:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.355532 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 03:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.355532 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 03:26:09 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-20 03:26:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-20 03:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.065 (still bad) 2011-Dec-20 03:26:15 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-20 03:26:15 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-20 03:26:15 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-20 03:26:15 LOG5 end_task: Level: (5) ID = <10057> Status = 0 0 0 0 ok 2011-Dec-20 03:26:15 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-20 03:26:15 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2011-Dec-20 03:26:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-20 03:26:15 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-20 03:26:15 LOG5 finish_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2011-Dec-20 03:26:15 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-20 03:26:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 03:26:15 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-20 03:26:15 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2011-Dec-20 03:26:15 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-20 03:26:15 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 248.00 and ZA = 14.85 2011-Dec-20 03:26:15 LOG3 track_source: Calling 'track_source AGES3193_p3_022 248.00 14.8538817593 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-20 03:26:15 START begin_task: Starting task 'sending tracking commands' 2011-Dec-20 03:26:15 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2011-Dec-20 03:26:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_022} INFO {Slewing to source 'AGES3193_p3_022' ...} 2011-Dec-20 03:26:15 INFO1 track_source: Starting to track AGES3193_p3_022 2011-Dec-20 03:26:15 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_022" 2011-Dec-20 03:26:15 LOG3 vw_send: To DATATAKING: set ra 248.00 2011-Dec-20 03:26:15 LOG3 vw_send: To DATATAKING: set dec 14.8538817593 2011-Dec-20 03:26:15 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-20 03:26:15 LOG3 vw_send: To DATATAKING: pnt tr 248.00 14.8538817593 -CF 2011-Dec-20 03:26:15 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 03:26:15 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-20 03:26:15 LOG5 finish_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2011-Dec-20 03:26:15 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-20 03:26:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 03:26:15 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-20 03:26:15 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2011-Dec-20 03:26:15 LOG1 fixed_driftmap: Parameters: HA = -00:59:59.6 Start = 08:53:42.6 LST = 08:53:22.0 diff = 20.6 secs 2011-Dec-20 03:26:15 INFO2 fixed_driftmap: Waiting 18.6 seconds for RA 9:53:42 2011-Dec-20 03:26:15 INFO2 lstwait: Waiting for 18.6 secs from LST 08:53:22 to LST 08:53:41 ... 2011-Dec-20 03:26:15 LOG4 send_obs_status: To obs_status: <1> TASKTIME 18.578783483968799 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-20 03:26:15 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-20 03:26:15 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2011-Dec-20 03:26:15 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_022" 2011-Dec-20 03:26:15 LOG4 got_cormsg: From DATATAKING: set ra 248.00 2011-Dec-20 03:26:15 LOG4 got_cormsg: From DATATAKING: set dec 14.8538817593 2011-Dec-20 03:26:15 LOG4 got_cormsg: From DATATAKING: vw% 248.00 2011-Dec-20 03:26:15 LOG4 got_cormsg: From DATATAKING: vw% 14.8538817593 2011-Dec-20 03:26:15 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:26:15 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-20 03:26:15 LOG4 got_cormsg: From DATATAKING: pnt tr 248.00 14.8538817593 -CF 2011-Dec-20 03:26:15 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 03:26:15 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2011-Dec-20 03:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.065 (still bad) 2011-Dec-20 03:26:34 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-20 03:26:34 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2011-Dec-20 03:26:34 LOG4 lstwait: Finished waiting 0.42 seconds late 2011-Dec-20 03:26:34 INFO3 lstwait: Finished waiting 2011-Dec-20 03:26:34 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-20 03:26:34 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-20 03:26:34 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-20 03:26:34 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-20 03:26:34 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-20 03:26:34 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-20 03:26:34 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2011-Dec-20 03:26:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-20 03:26:34 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-20 03:26:34 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-20 03:26:34 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-20 03:26:34 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-20 03:26:34 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_022 2011-Dec-20 03:26:34 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-20 03:26:34 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-20 03:26:34 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-20 03:26:34 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-20 03:26:34 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-20 03:26:34 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-20 03:26:34 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-20 03:26:34 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-20 03:26:34 LOG3 take_mock_data: PSET configuration: patternid=135400063 2011-Dec-20 03:26:34 LOG3 take_mock_data: PSET configuration: scanid=135400063 2011-Dec-20 03:26:34 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-20 03:26:34 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-20 03:26:34 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-20 03:26:34 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456355532.0 2011-Dec-20 03:26:34 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306355532.0 2011-Dec-20 03:26:34 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-20 03:26:34 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-20 03:26:34 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_022:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=135400063:scanid=135400063:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456355532.0:topobfreqhz=1306355532.0:filetype=1 2011-Dec-20 03:26:34 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-20 03:26:34 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2011-Dec-20 03:26:34 LOG4 from_mock: From MOCK: psetok 2011-Dec-20 03:26:34 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-20 03:26:34 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2011-Dec-20 03:26:34 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-20 03:26:34 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-20 03:26:34 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-20 03:26:34 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-20 03:26:34 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2011-Dec-20 03:26:34 LOG4 from_mock: From MOCK: starok 2011-Dec-20 03:26:34 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-20 03:26:34 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2011-Dec-20 03:26:34 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-20 03:26:34 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 135400063 2011-Dec-20 03:26:34 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-20 03:26:34 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2011-Dec-20 03:26:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-20 03:26:34 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-20 03:26:34 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-20 03:26:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-20 03:26:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26795.00 2011-Dec-20 03:26:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.355532 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-20 03:26:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.355532 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2011-Dec-20 03:26:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.355532 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2011-Dec-20 03:26:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.355532 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2011-Dec-20 03:26:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.355532 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2011-Dec-20 03:26:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.355532 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 03:26:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.355532 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 03:26:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.355532 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 03:26:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.355532 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 03:26:36 INFO2 got_mock_message: Mock spectrometer start file number is 00200 2011-Dec-20 03:26:36 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-20 03:26:36 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1199.9 s 2011-Dec-20 03:26:36 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-20 03:26:36 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-20 03:26:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-20 03:26:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-20 03:26:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-20 03:26:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-20 03:26:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-20 03:26:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-20 03:26:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-20 03:26:36 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-20 03:26:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 03:26:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 03:26:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 03:26:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 03:26:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 03:26:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 03:26:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 03:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:26:39 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:26:39.02 2011-Dec-20 03:26:39 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324365999.02 Tue Dec 20 03:26:39 2011 2011-Dec-20 03:26:39 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-20 03:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:26:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:26:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 0.908 0.978 0.973 2011-Dec-20 03:26:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.978 1.032 0.920 0.948 2011-Dec-20 03:26:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.879 0.937 1.024 0.921 2011-Dec-20 03:26:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.983 0.014 1.071 0.014 2011-Dec-20 03:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:27:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:27:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.926 0.908 0.980 0.974 2011-Dec-20 03:27:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.979 1.029 0.924 0.951 2011-Dec-20 03:27:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.879 0.938 1.027 0.924 2011-Dec-20 03:27:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.980 0.014 1.069 0.014 2011-Dec-20 03:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.066 (still bad) 2011-Dec-20 03:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.066 (still bad) 2011-Dec-20 03:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:28:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:28:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.926 0.908 0.978 0.973 2011-Dec-20 03:28:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.979 1.030 0.929 0.955 2011-Dec-20 03:28:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.878 0.937 1.025 0.922 2011-Dec-20 03:28:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.980 0.014 1.069 0.014 2011-Dec-20 03:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:29:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:29:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.924 0.908 0.976 0.974 2011-Dec-20 03:29:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.977 1.030 0.922 0.950 2011-Dec-20 03:29:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.879 0.937 1.029 0.926 2011-Dec-20 03:29:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.980 0.014 1.068 0.014 2011-Dec-20 03:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:30:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:30:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 0.911 0.976 0.973 2011-Dec-20 03:30:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.978 1.031 0.924 0.949 2011-Dec-20 03:30:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.878 0.938 1.027 0.922 2011-Dec-20 03:30:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.978 0.014 1.067 0.014 2011-Dec-20 03:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2011-Dec-20 03:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2011-Dec-20 03:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2011-Dec-20 03:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2011-Dec-20 03:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2011-Dec-20 03:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2011-Dec-20 03:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2011-Dec-20 03:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2011-Dec-20 03:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2011-Dec-20 03:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2011-Dec-20 03:31:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:31:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 0.910 0.977 0.975 2011-Dec-20 03:31:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.978 1.032 0.924 0.951 2011-Dec-20 03:31:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.879 0.939 1.025 0.922 2011-Dec-20 03:31:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.987 0.014 1.076 0.014 2011-Dec-20 03:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2011-Dec-20 03:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2011-Dec-20 03:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2011-Dec-20 03:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2011-Dec-20 03:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:32:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:32:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 0.911 0.979 0.974 2011-Dec-20 03:32:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.979 1.031 0.924 0.949 2011-Dec-20 03:32:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.880 0.940 1.025 0.923 2011-Dec-20 03:32:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.982 0.014 1.070 0.014 2011-Dec-20 03:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:33:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:33:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 0.909 0.976 0.975 2011-Dec-20 03:33:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.979 1.033 0.925 0.951 2011-Dec-20 03:33:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.879 0.939 1.027 0.924 2011-Dec-20 03:33:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.981 0.014 1.069 0.014 2011-Dec-20 03:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:35:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:35:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.926 0.909 0.980 0.974 2011-Dec-20 03:35:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.977 1.030 0.922 0.949 2011-Dec-20 03:35:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.877 0.939 1.025 0.923 2011-Dec-20 03:35:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.980 0.014 1.069 0.014 2011-Dec-20 03:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:36:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:36:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 0.915 0.980 0.973 2011-Dec-20 03:36:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.978 1.029 0.923 0.950 2011-Dec-20 03:36:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.876 0.938 1.026 0.923 2011-Dec-20 03:36:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.979 0.014 1.067 0.014 2011-Dec-20 03:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:37:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:37:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 0.914 0.982 0.976 2011-Dec-20 03:37:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.979 1.030 0.924 0.950 2011-Dec-20 03:37:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.877 0.937 1.029 0.924 2011-Dec-20 03:37:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.979 0.014 1.070 0.014 2011-Dec-20 03:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2011-Dec-20 03:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2011-Dec-20 03:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2011-Dec-20 03:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2011-Dec-20 03:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2011-Dec-20 03:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2011-Dec-20 03:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2011-Dec-20 03:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2011-Dec-20 03:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2011-Dec-20 03:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2011-Dec-20 03:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2011-Dec-20 03:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2011-Dec-20 03:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2011-Dec-20 03:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2011-Dec-20 03:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2011-Dec-20 03:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2011-Dec-20 03:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:38:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:38:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 0.912 0.978 0.972 2011-Dec-20 03:38:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.985 1.034 0.925 0.950 2011-Dec-20 03:38:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.878 0.938 1.032 0.925 2011-Dec-20 03:38:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.981 0.014 1.071 0.014 2011-Dec-20 03:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2011-Dec-20 03:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2011-Dec-20 03:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:39:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:39:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 0.912 0.979 0.975 2011-Dec-20 03:39:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.985 1.036 0.924 0.951 2011-Dec-20 03:39:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.881 0.944 1.031 0.924 2011-Dec-20 03:39:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.982 0.014 1.072 0.014 2011-Dec-20 03:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2011-Dec-20 03:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2011-Dec-20 03:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2011-Dec-20 03:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2011-Dec-20 03:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2011-Dec-20 03:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2011-Dec-20 03:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2011-Dec-20 03:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2011-Dec-20 03:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2011-Dec-20 03:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2011-Dec-20 03:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2011-Dec-20 03:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2011-Dec-20 03:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2011-Dec-20 03:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2011-Dec-20 03:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2011-Dec-20 03:39:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2011-Dec-20 03:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2011-Dec-20 03:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2011-Dec-20 03:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2011-Dec-20 03:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2011-Dec-20 03:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2011-Dec-20 03:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2011-Dec-20 03:40:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:40:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.926 0.912 0.981 0.977 2011-Dec-20 03:40:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.981 1.032 0.924 0.951 2011-Dec-20 03:40:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.879 0.941 1.031 0.925 2011-Dec-20 03:40:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.986 0.014 1.073 0.014 2011-Dec-20 03:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2011-Dec-20 03:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2011-Dec-20 03:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2011-Dec-20 03:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2011-Dec-20 03:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2011-Dec-20 03:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2011-Dec-20 03:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2011-Dec-20 03:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2011-Dec-20 03:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2011-Dec-20 03:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2011-Dec-20 03:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2011-Dec-20 03:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:41:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:41:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 0.912 0.981 0.975 2011-Dec-20 03:41:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.983 1.030 0.925 0.951 2011-Dec-20 03:41:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.881 0.942 1.030 0.923 2011-Dec-20 03:41:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.982 0.014 1.072 0.014 2011-Dec-20 03:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2011-Dec-20 03:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2011-Dec-20 03:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2011-Dec-20 03:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:42:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:42:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 0.910 0.978 0.973 2011-Dec-20 03:42:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.980 1.029 0.924 0.951 2011-Dec-20 03:42:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.880 0.940 1.029 0.924 2011-Dec-20 03:42:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.979 0.014 1.068 0.014 2011-Dec-20 03:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-20 03:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:43:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:43:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 0.909 0.981 0.977 2011-Dec-20 03:43:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.981 1.030 0.926 0.950 2011-Dec-20 03:43:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.879 0.939 1.030 0.923 2011-Dec-20 03:43:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.981 0.014 1.071 0.014 2011-Dec-20 03:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2011-Dec-20 03:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2011-Dec-20 03:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2011-Dec-20 03:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2011-Dec-20 03:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2011-Dec-20 03:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2011-Dec-20 03:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2011-Dec-20 03:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2011-Dec-20 03:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2011-Dec-20 03:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2011-Dec-20 03:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2011-Dec-20 03:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:44:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:44:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 0.913 0.981 0.974 2011-Dec-20 03:44:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.981 1.031 0.924 0.951 2011-Dec-20 03:44:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.879 0.939 1.029 0.923 2011-Dec-20 03:44:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.981 0.014 1.070 0.014 2011-Dec-20 03:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-20 03:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:45:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:45:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 0.913 0.981 0.975 2011-Dec-20 03:45:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.985 1.035 0.931 0.957 2011-Dec-20 03:45:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.881 0.939 1.029 0.924 2011-Dec-20 03:45:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.982 0.014 1.071 0.014 2011-Dec-20 03:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.070 (still bad) 2011-Dec-20 03:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.069 (still bad) 2011-Dec-20 03:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2011-Dec-20 03:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-20 03:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2011-Dec-20 03:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2011-Dec-20 03:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.073 (still bad) 2011-Dec-20 03:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2011-Dec-20 03:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2011-Dec-20 03:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2011-Dec-20 03:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2011-Dec-20 03:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2011-Dec-20 03:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2011-Dec-20 03:46:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:46:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.954 0.936 0.984 0.979 2011-Dec-20 03:46:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.981 1.033 0.930 0.956 2011-Dec-20 03:46:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.882 0.942 1.035 0.929 2011-Dec-20 03:46:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.990 0.014 1.078 0.014 2011-Dec-20 03:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2011-Dec-20 03:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2011-Dec-20 03:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2011-Dec-20 03:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2011-Dec-20 03:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2011-Dec-20 03:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.076 (still bad) 2011-Dec-20 03:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2011-Dec-20 03:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2011-Dec-20 03:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2011-Dec-20 03:46:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-20 03:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2011-Dec-20 03:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2011-Dec-20 03:46:40 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-20 03:46:40 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-20 03:46:40 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-20 03:46:40 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2011-Dec-20 03:46:40 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-20 03:46:40 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2011-Dec-20 03:46:40 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-20 03:46:40 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2011-Dec-20 03:46:40 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-20 03:46:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-20 03:46:40 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-20 03:46:40 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2011-Dec-20 03:46:40 COMMAND run_command_line: EXECUTING command 13: 'ENDIF' 2011-Dec-20 03:46:40 COMMAND run_command_line: EXECUTING command 16: 'IF LSTSLEW(AGES3193_p3_024) < 091711 THEN' 2011-Dec-20 03:46:40 LOG3 is_if_valid: Current source data: up 240.6 10.5 UP - - 121 1.8 2011-Dec-20 03:46:40 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_024) < 091711 2011-Dec-20 03:46:40 INFO5 is_if_valid: Condition parsed as: 9.2606589999999986 < 9.2863888888888884 2011-Dec-20 03:46:40 COMMAND run_command_line: EXECUTING command 17: 'FIXEDDRIFT az=238.59 alfaangle=-38.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_024 ra=95300.00 dec=231830.00' 2011-Dec-20 03:46:40 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-20 03:46:41 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-20 03:46:41 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 238.59 -38.9 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_024 95300.00 231830.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-20 03:46:41 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-20 03:46:41 LOG5 begin_task: Level: (2) ID = <10064> Status = 0 0 0 0 ok 2011-Dec-20 03:46:41 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_022' 2011-Dec-20 03:46:41 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-20 03:46:41 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_024} 2011-Dec-20 03:46:41 INFO3 fixed_driftmap: Sending telescope to Az = 238.59 and ZA = 9.83 2011-Dec-20 03:46:41 LOG3 track_source: Calling 'track_source AGES3193_p3_024 238.59 9.8295967833 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-20 03:46:41 START begin_task: Starting task 'sending tracking commands' 2011-Dec-20 03:46:41 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2011-Dec-20 03:46:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_024} INFO {Slewing to source 'AGES3193_p3_024' ...} 2011-Dec-20 03:46:41 INFO1 track_source: Starting to track AGES3193_p3_024 2011-Dec-20 03:46:41 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_024" 2011-Dec-20 03:46:41 LOG3 vw_send: To DATATAKING: set ra 238.59 2011-Dec-20 03:46:41 LOG3 vw_send: To DATATAKING: set dec 9.8295967833 2011-Dec-20 03:46:41 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-20 03:46:41 LOG3 vw_send: To DATATAKING: pnt tr 238.59 9.8295967833 -CF 2011-Dec-20 03:46:41 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 03:46:41 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-20 03:46:41 LOG5 finish_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2011-Dec-20 03:46:41 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-20 03:46:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 03:46:41 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-20 03:46:41 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2011-Dec-20 03:46:41 START begin_task: Starting task 'rotate ALFA to -38.9 degrees' 2011-Dec-20 03:46:41 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2011-Dec-20 03:46:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -38.9 degrees ...} 2011-Dec-20 03:46:41 INFO2 rotate_alfa: ALFA commanded to -38.9 degrees 2011-Dec-20 03:46:41 LOG3 sock_errsend: To ALFAMOTOR: POSITION -38.9 REPLY 2011-Dec-20 03:46:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-20 03:46:41 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-20 03:46:41 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2011-Dec-20 03:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.075 (still bad) 2011-Dec-20 03:46:41 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_024" 2011-Dec-20 03:46:41 LOG4 got_cormsg: From DATATAKING: set ra 238.59 2011-Dec-20 03:46:41 LOG4 got_cormsg: From DATATAKING: set dec 9.8295967833 2011-Dec-20 03:46:41 LOG4 got_cormsg: From DATATAKING: vw% 238.59 2011-Dec-20 03:46:41 LOG4 got_cormsg: From DATATAKING: vw% 9.8295967833 2011-Dec-20 03:46:41 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:46:41 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-20 03:46:41 LOG4 got_cormsg: From DATATAKING: pnt tr 238.59 9.8295967833 -CF 2011-Dec-20 03:46:41 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 03:46:41 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-20 03:46:41 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:46:49 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-20 03:46:49 INFO3 alfa_motor: ALFA rotator in-position -38.90 degrees 2011-Dec-20 03:46:49 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-20 03:46:49 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2011-Dec-20 03:46:49 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-20 03:46:49 STOP finish_task: Finishing task 'rotate ALFA to -38.9 degrees' 2011-Dec-20 03:46:49 LOG5 finish_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2011-Dec-20 03:46:49 INFO2 finish_task: DONE finished configuration: rotating ALFA to -38.9 degrees 2011-Dec-20 03:46:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 03:46:49 STOP end_task: Finishing task 'rotate ALFA to -38.9 degrees' with status 'OK' 2011-Dec-20 03:46:49 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2011-Dec-20 03:46:49 START begin_task: Starting task 'waiting on telescope' 2011-Dec-20 03:46:49 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2011-Dec-20 03:46:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-20 03:46:49 LOG3 waittrk: Start waittrk 5 2011-Dec-20 03:46:49 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-20 03:46:49 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2011-Dec-20 03:46:54 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-20 03:46:54 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2011-Dec-20 03:46:54 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-20 03:46:54 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2011-Dec-20 03:48:53 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-20 03:48:53 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2011-Dec-20 03:48:53 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-20 03:48:53 INFO2 waittrk: Now tracking AGES3193_p3_024 2011-Dec-20 03:48:53 LOG4 waittrk: Current telescope position: Az = 238.12 ZA = 9.84 2011-Dec-20 03:48:53 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-20 03:48:53 LOG5 finish_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2011-Dec-20 03:48:53 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-20 03:48:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 03:48:53 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-20 03:48:53 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2011-Dec-20 03:48:53 START begin_task: Starting task 'selecting calibration type' 2011-Dec-20 03:48:53 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2011-Dec-20 03:48:53 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-20 03:48:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-20 03:48:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 03:48:53 START begin_task: Starting task 'waiting on setcal' 2011-Dec-20 03:48:53 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2011-Dec-20 03:48:53 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-20 03:48:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 03:48:54 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:48:54 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-20 03:48:54 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-20 03:48:54 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2011-Dec-20 03:48:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-20 03:48:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-20 03:48:54 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-20 03:48:54 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-20 03:48:54 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2011-Dec-20 03:48:54 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:48:54 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-20 03:48:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-20 03:48:54 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2011-Dec-20 03:48:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-20 03:48:54 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-20 03:48:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-20 03:48:54 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-20 03:48:54 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-20 03:48:54 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2011-Dec-20 03:48:54 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-20 03:48:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-20 03:48:54 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2011-Dec-20 03:48:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-20 03:48:54 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-20 03:48:54 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-20 03:48:54 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2011-Dec-20 03:48:54 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Dec-20 03:48:54 INFO2 astwait: Waiting for 6 seconds from 07:48:54 to 07:49:00 UTC ... 2011-Dec-20 03:48:54 LOG4 send_obs_status: To obs_status: <1> TASKTIME 6 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-20 03:48:54 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Dec-20 03:48:54 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2011-Dec-20 03:49:00 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Dec-20 03:49:00 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2011-Dec-20 03:49:00 INFO3 astwait: Finished waiting 2011-Dec-20 03:49:00 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-20 03:49:00 LOG5 dopset_later: Calling 'dopset_later 61.459439426838777' 2011-Dec-20 03:49:00 INFO3 dopset_later: Setting Doppler correction for 03:50:00 (61.5 seconds from now) 2011-Dec-20 03:49:00 LOG5 antvel: Calling 'antvel 238.590000 9.829597 F Heliocentric 61.459439426838777' 2011-Dec-20 03:49:00 LOG2 antvel: Transforming current Az = 238.59 ZA = 9.83 to apparent RA = 09:53:42.0 Dec = +23:14:51.7 2011-Dec-20 03:49:00 LOG2 antvel: Parameters to Doppler: Heliocentric 28200 2011 354 0.0 2011-Dec-20 03:49:00 INFO5 antvel: Computed antenna velocity: -24.29290 km/s 2011-Dec-20 03:49:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-24.2928953089 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-20 03:49:00 INFO4 dopset_gen: New sky frequencies: 1381.355363 1381.355363 1381.355363 1381.355363 1381.355363 1381.355363 1381.355363 1381.355363 1381.355363 2011-Dec-20 03:49:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.355363 sky0=1381.355363 sky1=1381.355363 sky2=1381.355363 sky3=1381.355363 sky4=1381.355363 sky5=1381.355363 sky6=1381.355363 sky7=1381.355363 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-20 03:49:00 LOG2 dopset_gen: Result from 'sky2syn': 1631.355363 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-20 03:49:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631355363.0} 2011-Dec-20 03:49:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 03:49:00 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-20 03:49:00 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-20 03:49:00 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.1 Dec = +23:18:15.4 2011-Dec-20 03:49:00 LOG3 track_source: Calling 'track_source AGES3193_p3_024 095203.1 231815.4 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-20 03:49:00 START begin_task: Starting task 'sending tracking commands' 2011-Dec-20 03:49:00 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2011-Dec-20 03:49:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_024} INFO {Slewing to source 'AGES3193_p3_024' ...} 2011-Dec-20 03:49:00 INFO1 track_source: Starting to track AGES3193_p3_024 2011-Dec-20 03:49:00 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_024" 2011-Dec-20 03:49:00 LOG3 vw_send: To DATATAKING: set ra 095203.1 2011-Dec-20 03:49:00 LOG3 vw_send: To DATATAKING: set dec 231815.4 2011-Dec-20 03:49:00 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-20 03:49:00 LOG3 vw_send: To DATATAKING: pnt tr 095203.1 231815.4 -CJ 2011-Dec-20 03:49:00 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 03:49:00 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-20 03:49:00 LOG5 finish_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2011-Dec-20 03:49:00 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-20 03:49:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 03:49:00 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-20 03:49:00 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2011-Dec-20 03:49:00 START begin_task: Starting task 'waiting on telescope' 2011-Dec-20 03:49:00 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2011-Dec-20 03:49:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-20 03:49:00 LOG3 waittrk: Start waittrk 5 2011-Dec-20 03:49:00 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-20 03:49:00 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2011-Dec-20 03:49:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631355363.0} 2011-Dec-20 03:49:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 03:49:00 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:49:00 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_024" 2011-Dec-20 03:49:00 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:49:00 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:49:00 LOG4 got_cormsg: From DATATAKING: set ra 095203.1 2011-Dec-20 03:49:00 LOG4 got_cormsg: From DATATAKING: set dec 231815.4 2011-Dec-20 03:49:00 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-20 03:49:00 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.1 231815.4 -CJ 2011-Dec-20 03:49:00 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 03:49:00 LOG4 got_cormsg: From DATATAKING: 095203.1 2011-Dec-20 03:49:00 LOG4 got_cormsg: From DATATAKING: vw% 231815.4 2011-Dec-20 03:49:00 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2011-Dec-20 03:49:05 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-20 03:49:05 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2011-Dec-20 03:49:05 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-20 03:49:05 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2011-Dec-20 03:49:07 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-20 03:49:07 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2011-Dec-20 03:49:07 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-20 03:49:07 INFO2 waittrk: Now tracking AGES3193_p3_024 2011-Dec-20 03:49:07 LOG4 waittrk: Current telescope position: Az = 238.10 ZA = 9.82 2011-Dec-20 03:49:07 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-20 03:49:07 LOG5 finish_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2011-Dec-20 03:49:07 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-20 03:49:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 03:49:07 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-20 03:49:07 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2011-Dec-20 03:49:07 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-20 03:49:07 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2011-Dec-20 03:49:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-20 03:49:07 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-20 03:49:07 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-20 03:49:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-20 03:49:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 03:49:07 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-20 03:49:07 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2011-Dec-20 03:49:07 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-20 03:49:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 03:49:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:49:10 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-20 03:49:10 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-20 03:49:10 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2011-Dec-20 03:49:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-20 03:49:10 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-20 03:49:10 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2011-Dec-20 03:49:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-20 03:49:10 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-20 03:49:10 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-20 03:49:10 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-20 03:49:10 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-20 03:49:10 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-20 03:49:10 LOG5 begin_task: Level: (5) ID = <10083> Status = 0 0 0 0 ok 2011-Dec-20 03:49:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-20 03:49:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:49:11 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 8 6 dB 2011-Dec-20 03:49:11 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 3 3 dB 2011-Dec-20 03:49:11 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 3 dB 2011-Dec-20 03:49:11 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2011-Dec-20 03:49:11 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-20 03:49:11 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-20 03:49:11 LOG5 end_task: Level: (5) ID = <10083> Status = 0 0 0 0 ok 2011-Dec-20 03:49:11 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.894 1.114 ALFA beam 1: 0.948 0.951 2011-Dec-20 03:49:11 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.939 1.009 ALFA beam 3: 1.107 0.905 2011-Dec-20 03:49:11 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.866 0.897 ALFA beam 5: 0.984 1.130 2011-Dec-20 03:49:11 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.952 0.014 ALFA beam 7: 1.039 0.014 2011-Dec-20 03:49:11 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-20 03:49:11 LOG5 finish_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2011-Dec-20 03:49:11 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-20 03:49:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 03:49:11 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-20 03:49:11 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2011-Dec-20 03:49:11 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-20 03:49:11 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2011-Dec-20 03:49:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-20 03:49:11 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-20 03:49:11 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-20 03:49:11 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-20 03:49:11 LOG5 begin_task: Level: (5) ID = <10085> Status = 0 0 0 0 ok 2011-Dec-20 03:49:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:49:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.894 1.114 0.948 0.951 2011-Dec-20 03:49:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 1.009 1.107 0.905 2011-Dec-20 03:49:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 0.897 0.984 1.130 2011-Dec-20 03:49:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.952 0.014 1.039 0.014 2011-Dec-20 03:49:17 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.9 28.1 B 30.9 30.9 mn:A 0.2 0.0 B -0.2 -0.3 gn: 11 11 2011-Dec-20 03:49:17 INFO3 from_mock: From MOCK: b0s1g0 rms:A 32.2 30.8 B 28.7 30.4 mn:A 0.1 -0.5 B -0.5 0.1 gn: 12 11 2011-Dec-20 03:49:17 INFO3 from_mock: From MOCK: b1s0g0 rms:A 31.4 29.4 B 33.5 29.3 mn:A 0.6 0.7 B 0.1 0.0 gn: 7 11 2011-Dec-20 03:49:17 INFO3 from_mock: From MOCK: b1s1g0 rms:A 30.8 28.4 B 31.8 31.8 mn:A -0.2 -0.3 B 0.4 0.1 gn: 8 10 2011-Dec-20 03:49:17 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.0 28.1 B 28.3 29.6 mn:A 0.1 -0.3 B 0.3 0.1 gn: 10 11 2011-Dec-20 03:49:17 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.8 30.1 B 32.9 30.6 mn:A 0.2 -0.3 B 0.1 0.2 gn: 11 12 2011-Dec-20 03:49:17 INFO3 from_mock: From MOCK: b3s0g0 rms:A 29.7 29.4 B 31.4 28.0 mn:A 0.4 -0.2 B 0.1 -0.3 gn: 12 12 2011-Dec-20 03:49:17 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.9 30.2 B 29.7 30.9 mn:A -0.3 0.4 B 0.1 0.1 gn: 12 12 2011-Dec-20 03:49:17 INFO3 from_mock: From MOCK: b4s0g0 rms:A 31.0 30.0 B 31.8 32.0 mn:A -0.2 -0.3 B -0.4 -0.0 gn: 13 12 2011-Dec-20 03:49:17 INFO3 from_mock: From MOCK: b4s1g0 rms:A 33.1 29.9 B 30.8 29.7 mn:A -0.0 -0.1 B -0.3 0.2 gn: 16 13 2011-Dec-20 03:49:17 INFO3 from_mock: From MOCK: b5s0g0 rms:A 30.0 28.9 B 31.2 31.2 mn:A 0.6 0.5 B 0.0 0.4 gn: 12 11 2011-Dec-20 03:49:17 INFO3 from_mock: From MOCK: b5s1g0 rms:A 30.1 29.9 B 31.5 31.3 mn:A -0.4 0.2 B 0.0 0.3 gn: 12 11 2011-Dec-20 03:49:17 INFO3 from_mock: From MOCK: b6s0g0 rms:A 30.4 27.8 B 14.1 14.5 mn:A -0.5 0.2 B 0.4 -0.5 gn: 12 31 2011-Dec-20 03:49:17 INFO3 from_mock: From MOCK: b6s1g0 rms:A 30.8 27.9 B 11.1 10.8 mn:A 0.6 0.6 B 0.1 0.2 gn: 13 31 2011-Dec-20 03:49:17 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-20 03:49:17 LOG5 end_task: Level: (5) ID = <10085> Status = 0 0 0 0 ok 2011-Dec-20 03:49:17 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-20 03:49:17 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-20 03:49:17 LOG5 finish_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2011-Dec-20 03:49:17 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-20 03:49:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 03:49:17 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-20 03:49:17 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2011-Dec-20 03:49:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-20 03:49:17 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-20 03:49:17 LOG5 finish_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2011-Dec-20 03:49:17 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-20 03:49:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 03:49:17 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-20 03:49:17 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2011-Dec-20 03:49:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ep 2011-Dec-20 03:49:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ep 2011-Dec-20 03:49:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ep 2011-Dec-20 03:49:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ep 2011-Dec-20 03:49:18 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-20 03:49:18 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-20 03:49:18 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2011-Dec-20 03:49:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-20 03:49:18 START begin_task: Starting task 'selecting calibration type' 2011-Dec-20 03:49:18 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2011-Dec-20 03:49:18 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-20 03:49:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-20 03:49:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 03:49:18 START begin_task: Starting task 'waiting on setcal' 2011-Dec-20 03:49:18 LOG5 begin_task: Level: (5) ID = <10088> Status = 0 0 0 0 ok 2011-Dec-20 03:49:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ep' 2011-Dec-20 03:49:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-20 03:49:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 03:49:18 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:49:18 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-20 03:49:18 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-20 03:49:18 LOG5 end_task: Level: (5) ID = <10088> Status = 0 0 0 0 ok 2011-Dec-20 03:49:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-20 03:49:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-20 03:49:18 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-20 03:49:18 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-20 03:49:18 LOG5 begin_task: Level: (5) ID = <10089> Status = 0 0 0 0 ok 2011-Dec-20 03:49:18 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:49:18 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-20 03:49:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-20 03:49:18 LOG5 end_task: Level: (5) ID = <10089> Status = 0 0 0 0 ok 2011-Dec-20 03:49:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-20 03:49:18 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-20 03:49:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-20 03:49:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-20 03:49:18 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-20 03:49:18 LOG5 begin_task: Level: (5) ID = <10090> Status = 0 0 0 0 ok 2011-Dec-20 03:49:18 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-20 03:49:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-20 03:49:18 LOG5 end_task: Level: (5) ID = <10090> Status = 0 0 0 0 ok 2011-Dec-20 03:49:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-20 03:49:18 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-20 03:49:18 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-20 03:49:18 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2011-Dec-20 03:49:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-20 03:49:18 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-20 03:49:18 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-20 03:49:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-20 03:49:18 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2011-Dec-20 03:49:18 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-20 03:49:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-20 03:49:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-20 03:49:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-20 03:49:18 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2011-Dec-20 03:49:18 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-20 03:49:18 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-20 03:49:18 LOG5 begin_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2011-Dec-20 03:49:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-20 03:49:18 LOG5 log_alfabeam: Parameters: 9.867527777777779 23.304277777777777 9.274947 2011.9696351433568 -38.900059 2011-Dec-20 03:49:18 LOG4 log_alfabeam: ALFABEAM 0 9.867527777777775 23.304277777777777 2011-Dec-20 03:49:18 LOG4 log_alfabeam: ALFABEAM 1 9.867984145923202 23.211117324641588 2011-Dec-20 03:49:18 LOG4 log_alfabeam: ALFABEAM 2 9.874259178915365 23.272974554338077 2011-Dec-20 03:49:18 LOG4 log_alfabeam: ALFABEAM 3 9.873766070035868 23.366932368271847 2011-Dec-20 03:49:18 LOG4 log_alfabeam: ALFABEAM 4 9.867000775601387 23.397671197190327 2011-Dec-20 03:49:18 LOG4 log_alfabeam: ALFABEAM 5 9.860793856990650 23.334423292140592 2011-Dec-20 03:49:18 LOG4 log_alfabeam: ALFABEAM 6 9.861283639543760 23.241823591492100 2011-Dec-20 03:49:18 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-20 03:49:18 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-20 03:49:18 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-20 03:49:18 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_024 2011-Dec-20 03:49:18 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-20 03:49:18 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-20 03:49:18 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-20 03:49:18 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-20 03:49:18 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-20 03:49:18 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-20 03:49:18 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-20 03:49:18 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-20 03:49:18 LOG3 take_mock_data: PSET configuration: patternid=135400063 2011-Dec-20 03:49:18 LOG3 take_mock_data: PSET configuration: scanid=135400064 2011-Dec-20 03:49:18 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-20 03:49:18 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-20 03:49:18 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-20 03:49:18 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456355363.0 2011-Dec-20 03:49:18 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306355363.0 2011-Dec-20 03:49:18 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-20 03:49:18 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-20 03:49:18 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_024:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=135400063:scanid=135400064:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456355363.0:topobfreqhz=1306355363.0:filetype=1 2011-Dec-20 03:49:18 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-20 03:49:18 LOG5 begin_task: Level: (5) ID = <10093> Status = 0 0 0 0 ok 2011-Dec-20 03:49:18 LOG4 from_mock: From MOCK: psetok 2011-Dec-20 03:49:18 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-20 03:49:18 LOG5 end_task: Level: (5) ID = <10093> Status = 0 0 0 0 ok 2011-Dec-20 03:49:18 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-20 03:49:18 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-20 03:49:18 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-20 03:49:18 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-20 03:49:18 LOG5 begin_task: Level: (5) ID = <10094> Status = 0 0 0 0 ok 2011-Dec-20 03:49:18 NOTE WAPPDATA-new_file: New FITS file: wapp.20111220.a2048.0002.fits 2011-Dec-20 03:49:19 LOG4 from_mock: From MOCK: starok 2011-Dec-20 03:49:19 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-20 03:49:19 LOG5 end_task: Level: (5) ID = <10094> Status = 0 0 0 0 ok 2011-Dec-20 03:49:19 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-20 03:49:19 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135400064 2011-Dec-20 03:49:19 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-20 03:49:19 LOG5 begin_task: Level: (5) ID = <10095> Status = 0 0 0 0 ok 2011-Dec-20 03:49:19 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111220.a2048.0002.fits} 2011-Dec-20 03:49:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-20 03:49:19 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-20 03:49:19 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-20 03:49:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-20 03:49:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28160.00 2011-Dec-20 03:49:21 INFO2 got_mock_message: Mock spectrometer start file number is 00300 2011-Dec-20 03:49:21 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-20 03:49:21 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-20 03:49:21 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-20 03:49:21 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-20 03:49:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-20 03:49:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-20 03:49:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-20 03:49:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-20 03:49:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-20 03:49:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-20 03:49:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-20 03:49:21 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-20 03:49:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 03:49:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 03:49:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 03:49:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 03:49:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 03:49:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 03:49:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 03:49:24 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:49:24.01 2011-Dec-20 03:49:24 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324367364.01 Tue Dec 20 03:49:24 2011 2011-Dec-20 03:49:24 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-20 03:49:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.355363 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-20 03:49:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.355363 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2011-Dec-20 03:49:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.355363 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2011-Dec-20 03:49:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.355363 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2011-Dec-20 03:49:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.355363 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2011-Dec-20 03:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.546 (still bad) 2011-Dec-20 03:49:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.355363 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 03:49:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.355363 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 03:49:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.355363 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 03:49:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.355363 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 03:49:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-20 03:49:30 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-20 03:49:30 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-20 03:49:30 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-20 03:49:30 LOG5 end_task: Level: (5) ID = <10095> Status = 0 0 0 0 ok 2011-Dec-20 03:49:30 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-20 03:49:30 LOG5 end_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2011-Dec-20 03:49:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-20 03:49:30 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-20 03:49:30 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-20 03:49:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-20 03:49:30 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2011-Dec-20 03:49:30 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-20 03:49:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-20 03:49:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-20 03:49:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-20 03:49:30 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2011-Dec-20 03:49:30 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-20 03:49:30 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-20 03:49:30 LOG5 begin_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2011-Dec-20 03:49:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-20 03:49:30 LOG5 log_alfabeam: Parameters: 9.867527777777779 23.304277777777777 9.278011 2011.9696354919258 -38.900059 2011-Dec-20 03:49:30 LOG4 log_alfabeam: ALFABEAM 0 9.867527777777783 23.304277777777788 2011-Dec-20 03:49:30 LOG4 log_alfabeam: ALFABEAM 1 9.867999935583651 23.211132862336239 2011-Dec-20 03:49:30 LOG4 log_alfabeam: ALFABEAM 2 9.874264520121418 23.273191067803481 2011-Dec-20 03:49:30 LOG4 log_alfabeam: ALFABEAM 3 9.873755310749074 23.367135234614505 2011-Dec-20 03:49:30 LOG4 log_alfabeam: ALFABEAM 4 9.866984651835841 23.397654263505530 2011-Dec-20 03:49:30 LOG4 log_alfabeam: ALFABEAM 5 9.860788725532938 23.334202450132622 2011-Dec-20 03:49:30 LOG4 log_alfabeam: ALFABEAM 6 9.861294318226454 23.241621528687087 2011-Dec-20 03:49:30 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-20 03:49:30 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-20 03:49:30 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-20 03:49:30 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_024 2011-Dec-20 03:49:30 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-20 03:49:30 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-20 03:49:30 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-20 03:49:30 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-20 03:49:30 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-20 03:49:30 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-20 03:49:30 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-20 03:49:30 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-20 03:49:30 LOG3 take_mock_data: PSET configuration: patternid=135400063 2011-Dec-20 03:49:30 LOG3 take_mock_data: PSET configuration: scanid=135400065 2011-Dec-20 03:49:30 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-20 03:49:30 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-20 03:49:30 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-20 03:49:30 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456355363.0 2011-Dec-20 03:49:30 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306355363.0 2011-Dec-20 03:49:30 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-20 03:49:30 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-20 03:49:30 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_024:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=135400063:scanid=135400065:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456355363.0:topobfreqhz=1306355363.0:filetype=1 2011-Dec-20 03:49:30 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-20 03:49:30 LOG5 begin_task: Level: (5) ID = <10098> Status = 0 0 0 0 ok 2011-Dec-20 03:49:30 LOG4 from_mock: From MOCK: psetok 2011-Dec-20 03:49:30 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-20 03:49:30 LOG5 end_task: Level: (5) ID = <10098> Status = 0 0 0 0 ok 2011-Dec-20 03:49:30 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-20 03:49:30 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-20 03:49:30 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-20 03:49:30 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-20 03:49:30 LOG5 begin_task: Level: (5) ID = <10099> Status = 0 0 0 0 ok 2011-Dec-20 03:49:30 LOG4 from_mock: From MOCK: starok 2011-Dec-20 03:49:30 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-20 03:49:30 LOG5 end_task: Level: (5) ID = <10099> Status = 0 0 0 0 ok 2011-Dec-20 03:49:30 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-20 03:49:30 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135400065 2011-Dec-20 03:49:30 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-20 03:49:30 LOG5 begin_task: Level: (5) ID = <10100> Status = 0 0 0 0 ok 2011-Dec-20 03:49:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-20 03:49:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-20 03:49:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28171.00 2011-Dec-20 03:49:31 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-20 03:49:31 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-20 03:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.546 (still bad) 2011-Dec-20 03:49:33 INFO2 got_mock_message: Mock spectrometer start file number is 00400 2011-Dec-20 03:49:33 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-20 03:49:33 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-20 03:49:33 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-20 03:49:33 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-20 03:49:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-20 03:49:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-20 03:49:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-20 03:49:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-20 03:49:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-20 03:49:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-20 03:49:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-20 03:49:33 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-20 03:49:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 03:49:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 03:49:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 03:49:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 03:49:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 03:49:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 03:49:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 03:49:36 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:49:36.01 2011-Dec-20 03:49:36 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324367376.01 Tue Dec 20 03:49:36 2011 2011-Dec-20 03:49:36 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-20 03:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.355363 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-20 03:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.355363 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2011-Dec-20 03:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.355363 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2011-Dec-20 03:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.355363 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2011-Dec-20 03:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.355363 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2011-Dec-20 03:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.355363 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 03:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.355363 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 03:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.355363 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 03:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.355363 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 03:49:36 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-20 03:49:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-20 03:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-20 03:49:42 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-20 03:49:42 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-20 03:49:42 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-20 03:49:42 LOG5 end_task: Level: (5) ID = <10100> Status = 0 0 0 0 ok 2011-Dec-20 03:49:42 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-20 03:49:42 LOG5 end_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2011-Dec-20 03:49:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-20 03:49:42 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-20 03:49:42 LOG5 finish_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2011-Dec-20 03:49:42 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-20 03:49:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 03:49:42 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-20 03:49:42 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2011-Dec-20 03:49:42 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-20 03:49:42 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 238.59 and ZA = 9.83 2011-Dec-20 03:49:42 LOG3 track_source: Calling 'track_source AGES3193_p3_024 238.59 9.8295967833 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-20 03:49:42 START begin_task: Starting task 'sending tracking commands' 2011-Dec-20 03:49:42 LOG5 begin_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2011-Dec-20 03:49:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_024} INFO {Slewing to source 'AGES3193_p3_024' ...} 2011-Dec-20 03:49:42 INFO1 track_source: Starting to track AGES3193_p3_024 2011-Dec-20 03:49:42 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_024" 2011-Dec-20 03:49:42 LOG3 vw_send: To DATATAKING: set ra 238.59 2011-Dec-20 03:49:42 LOG3 vw_send: To DATATAKING: set dec 9.8295967833 2011-Dec-20 03:49:42 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-20 03:49:42 LOG3 vw_send: To DATATAKING: pnt tr 238.59 9.8295967833 -CF 2011-Dec-20 03:49:42 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 03:49:42 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-20 03:49:42 LOG5 finish_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2011-Dec-20 03:49:42 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-20 03:49:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 03:49:42 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-20 03:49:42 LOG5 end_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2011-Dec-20 03:49:42 LOG1 fixed_driftmap: Parameters: HA = -00:36:29.8 Start = 09:17:12.4 LST = 09:16:52.9 diff = 19.5 secs 2011-Dec-20 03:49:42 INFO2 fixed_driftmap: Waiting 17.5 seconds for RA 9:53:42 2011-Dec-20 03:49:42 INFO2 lstwait: Waiting for 17.5 secs from LST 09:16:53 to LST 09:17:10 ... 2011-Dec-20 03:49:42 LOG4 send_obs_status: To obs_status: <1> TASKTIME 17.467085015961704 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-20 03:49:42 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-20 03:49:42 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2011-Dec-20 03:49:42 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_024" 2011-Dec-20 03:49:42 LOG4 got_cormsg: From DATATAKING: set ra 238.59 2011-Dec-20 03:49:42 LOG4 got_cormsg: From DATATAKING: set dec 9.8295967833 2011-Dec-20 03:49:42 LOG4 got_cormsg: From DATATAKING: vw% 238.59 2011-Dec-20 03:49:42 LOG4 got_cormsg: From DATATAKING: vw% 9.8295967833 2011-Dec-20 03:49:42 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 03:49:42 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-20 03:49:42 LOG4 got_cormsg: From DATATAKING: pnt tr 238.59 9.8295967833 -CF 2011-Dec-20 03:49:42 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 03:49:42 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2011-Dec-20 03:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-20 03:49:59 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-20 03:49:59 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2011-Dec-20 03:50:00 LOG4 lstwait: Finished waiting 0.54 seconds late 2011-Dec-20 03:50:00 INFO3 lstwait: Finished waiting 2011-Dec-20 03:50:00 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-20 03:50:00 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-20 03:50:00 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-20 03:50:00 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-20 03:50:00 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-20 03:50:00 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-20 03:50:00 LOG5 begin_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2011-Dec-20 03:50:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-20 03:50:00 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-20 03:50:00 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-20 03:50:00 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-20 03:50:00 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-20 03:50:00 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_024 2011-Dec-20 03:50:00 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-20 03:50:00 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-20 03:50:00 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-20 03:50:00 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-20 03:50:00 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-20 03:50:00 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-20 03:50:00 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-20 03:50:00 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-20 03:50:00 LOG3 take_mock_data: PSET configuration: patternid=135400066 2011-Dec-20 03:50:00 LOG3 take_mock_data: PSET configuration: scanid=135400066 2011-Dec-20 03:50:00 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-20 03:50:00 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-20 03:50:00 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-20 03:50:00 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456355363.0 2011-Dec-20 03:50:00 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306355363.0 2011-Dec-20 03:50:00 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-20 03:50:00 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-20 03:50:00 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_024:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=135400066:scanid=135400066:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456355363.0:topobfreqhz=1306355363.0:filetype=1 2011-Dec-20 03:50:00 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-20 03:50:00 LOG5 begin_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2011-Dec-20 03:50:00 LOG4 from_mock: From MOCK: psetok 2011-Dec-20 03:50:00 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-20 03:50:00 LOG5 end_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2011-Dec-20 03:50:00 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-20 03:50:00 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-20 03:50:00 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-20 03:50:00 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-20 03:50:00 LOG5 begin_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2011-Dec-20 03:50:00 LOG4 from_mock: From MOCK: starok 2011-Dec-20 03:50:00 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-20 03:50:00 LOG5 end_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2011-Dec-20 03:50:00 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-20 03:50:00 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 135400066 2011-Dec-20 03:50:00 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-20 03:50:00 LOG5 begin_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2011-Dec-20 03:50:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-20 03:50:00 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-20 03:50:00 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-20 03:50:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-20 03:50:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28201.00 2011-Dec-20 03:50:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.355363 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-20 03:50:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.355363 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2011-Dec-20 03:50:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.355363 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2011-Dec-20 03:50:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.355363 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2011-Dec-20 03:50:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.355363 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2011-Dec-20 03:50:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.355363 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 03:50:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.355363 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 03:50:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.355363 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 03:50:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.355363 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 03:50:02 INFO2 got_mock_message: Mock spectrometer start file number is 00500 2011-Dec-20 03:50:02 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-20 03:50:02 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2011-Dec-20 03:50:02 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-20 03:50:02 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-20 03:50:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-20 03:50:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-20 03:50:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-20 03:50:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-20 03:50:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-20 03:50:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-20 03:50:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-20 03:50:02 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-20 03:50:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 03:50:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 03:50:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 03:50:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 03:50:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 03:50:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 03:50:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 03:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-20 03:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-20 03:50:05 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:50:05.00 2011-Dec-20 03:50:05 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324367405.00 Tue Dec 20 03:50:05 2011 2011-Dec-20 03:50:05 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-20 03:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 03:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-20 03:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.156 (still bad) 2011-Dec-20 03:50:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:50:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.898 1.117 0.947 0.953 2011-Dec-20 03:50:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 1.005 1.108 0.904 2011-Dec-20 03:50:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.864 0.896 0.999 1.158 2011-Dec-20 03:50:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.952 0.014 1.037 0.014 2011-Dec-20 03:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.165 (still bad) 2011-Dec-20 03:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.166 (still bad) 2011-Dec-20 03:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.168 (still bad) 2011-Dec-20 03:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.167 (still bad) 2011-Dec-20 03:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.164 (still bad) 2011-Dec-20 03:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.161 (still bad) 2011-Dec-20 03:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.156 (still bad) 2011-Dec-20 03:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.153 (still bad) 2011-Dec-20 03:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 03:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 03:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 03:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-20 03:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 03:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 03:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-20 03:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 03:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-20 03:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:51:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:51:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.897 1.119 0.948 0.954 2011-Dec-20 03:51:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.933 1.005 1.108 0.906 2011-Dec-20 03:51:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.864 0.896 0.988 1.146 2011-Dec-20 03:51:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.014 1.037 0.014 2011-Dec-20 03:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 03:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-20 03:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 03:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-20 03:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-20 03:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 03:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 03:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-20 03:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-20 03:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-20 03:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 03:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-20 03:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 03:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 03:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 03:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 03:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 03:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 03:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-20 03:52:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:52:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.898 1.118 0.947 0.952 2011-Dec-20 03:52:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.931 1.005 1.110 0.906 2011-Dec-20 03:52:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.865 0.898 0.987 1.145 2011-Dec-20 03:52:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.951 0.014 1.037 0.014 2011-Dec-20 03:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 03:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 03:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-20 03:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 03:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 03:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:52:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 03:52:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 03:52:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 03:53:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 03:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 03:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:53:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:53:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.896 1.119 0.948 0.952 2011-Dec-20 03:53:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 1.003 1.107 0.904 2011-Dec-20 03:53:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 0.901 0.990 1.149 2011-Dec-20 03:53:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.951 0.014 1.038 0.014 2011-Dec-20 03:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 03:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-20 03:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 03:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 03:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:53:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:54:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:54:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 03:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 03:54:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:54:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:54:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:54:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:54:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.898 1.119 0.948 0.950 2011-Dec-20 03:54:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 1.006 1.108 0.905 2011-Dec-20 03:54:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 0.899 0.989 1.147 2011-Dec-20 03:54:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.954 0.014 1.040 0.014 2011-Dec-20 03:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 03:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 03:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 03:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 03:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 03:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-20 03:55:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:55:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.899 1.120 0.948 0.951 2011-Dec-20 03:55:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 1.005 1.106 0.905 2011-Dec-20 03:55:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.867 0.900 0.992 1.151 2011-Dec-20 03:55:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.953 0.014 1.040 0.014 2011-Dec-20 03:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 03:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-20 03:55:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 03:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 03:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:55:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 03:56:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:56:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.897 1.120 0.951 0.952 2011-Dec-20 03:56:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.932 1.006 1.109 0.906 2011-Dec-20 03:56:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 0.899 0.990 1.149 2011-Dec-20 03:56:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.952 0.014 1.040 0.014 2011-Dec-20 03:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 03:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:57:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:57:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.897 1.121 0.949 0.953 2011-Dec-20 03:57:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 1.008 1.110 0.906 2011-Dec-20 03:57:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.868 0.899 0.991 1.149 2011-Dec-20 03:57:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.953 0.014 1.040 0.014 2011-Dec-20 03:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 03:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 03:58:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:58:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.899 1.122 0.949 0.954 2011-Dec-20 03:58:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 1.006 1.110 0.906 2011-Dec-20 03:58:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.868 0.900 0.989 1.150 2011-Dec-20 03:58:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.952 0.014 1.039 0.014 2011-Dec-20 03:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 03:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 03:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 03:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:59:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 03:59:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.899 1.123 0.949 0.953 2011-Dec-20 03:59:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 1.005 1.110 0.906 2011-Dec-20 03:59:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.867 0.898 0.991 1.148 2011-Dec-20 03:59:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.952 0.014 1.042 0.014 2011-Dec-20 03:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 03:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 03:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 03:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 03:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 03:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 03:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.153 (still bad) 2011-Dec-20 03:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.155 (still bad) 2011-Dec-20 03:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.155 (still bad) 2011-Dec-20 03:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.156 (still bad) 2011-Dec-20 03:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.156 (still bad) 2011-Dec-20 03:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.155 (still bad) 2011-Dec-20 03:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.154 (still bad) 2011-Dec-20 04:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-20 04:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 04:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 04:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:00:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:00:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.902 1.128 0.947 0.952 2011-Dec-20 04:00:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 1.004 1.119 0.913 2011-Dec-20 04:00:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.868 0.898 0.990 1.148 2011-Dec-20 04:00:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.951 0.014 1.041 0.014 2011-Dec-20 04:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 04:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-20 04:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.155 (still bad) 2011-Dec-20 04:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.160 (still bad) 2011-Dec-20 04:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.161 (still bad) 2011-Dec-20 04:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.164 (still bad) 2011-Dec-20 04:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.166 (still bad) 2011-Dec-20 04:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.166 (still bad) 2011-Dec-20 04:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.164 (still bad) 2011-Dec-20 04:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.160 (still bad) 2011-Dec-20 04:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.156 (still bad) 2011-Dec-20 04:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.155 (still bad) 2011-Dec-20 04:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-20 04:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 04:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 04:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 04:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-20 04:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-20 04:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-20 04:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 04:01:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:01:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.895 1.121 0.949 0.953 2011-Dec-20 04:01:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.940 1.013 1.109 0.905 2011-Dec-20 04:01:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 0.898 0.991 1.151 2011-Dec-20 04:01:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.954 0.014 1.042 0.014 2011-Dec-20 04:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:02:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:02:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.898 1.125 0.950 0.954 2011-Dec-20 04:02:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 1.015 1.112 0.908 2011-Dec-20 04:02:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.868 0.899 0.989 1.150 2011-Dec-20 04:02:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.977 0.014 1.069 0.014 2011-Dec-20 04:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 04:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 04:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-20 04:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 04:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-20 04:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 04:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-20 04:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-20 04:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.155 (still bad) 2011-Dec-20 04:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.155 (still bad) 2011-Dec-20 04:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.155 (still bad) 2011-Dec-20 04:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.156 (still bad) 2011-Dec-20 04:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.156 (still bad) 2011-Dec-20 04:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-20 04:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.153 (still bad) 2011-Dec-20 04:03:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:03:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.898 1.123 0.951 0.955 2011-Dec-20 04:03:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 1.004 1.110 0.906 2011-Dec-20 04:03:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.868 0.899 0.994 1.151 2011-Dec-20 04:03:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.965 0.014 1.056 0.014 2011-Dec-20 04:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 04:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 04:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 04:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 04:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 04:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 04:04:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:04:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.898 1.119 0.949 0.953 2011-Dec-20 04:04:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 1.005 1.111 0.906 2011-Dec-20 04:04:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.868 0.900 0.991 1.147 2011-Dec-20 04:04:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.955 0.014 1.043 0.014 2011-Dec-20 04:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 04:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 04:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 04:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 04:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 04:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:05:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:05:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.897 1.120 0.950 0.951 2011-Dec-20 04:05:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 1.006 1.110 0.906 2011-Dec-20 04:05:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.867 0.900 0.990 1.147 2011-Dec-20 04:05:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.954 0.014 1.043 0.014 2011-Dec-20 04:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 04:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 04:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 04:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 04:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:06:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:06:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.896 1.118 0.956 0.963 2011-Dec-20 04:06:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.942 1.013 1.110 0.905 2011-Dec-20 04:06:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.867 0.901 0.991 1.150 2011-Dec-20 04:06:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.955 0.014 1.043 0.014 2011-Dec-20 04:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:06:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 04:07:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-20 04:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-20 04:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-20 04:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 04:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:07:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:07:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.897 1.121 0.949 0.954 2011-Dec-20 04:07:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 1.003 1.113 0.909 2011-Dec-20 04:07:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 0.898 0.987 1.149 2011-Dec-20 04:07:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.953 0.014 1.042 0.014 2011-Dec-20 04:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 04:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:08:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 04:08:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 04:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-20 04:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-20 04:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.153 (still bad) 2011-Dec-20 04:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.154 (still bad) 2011-Dec-20 04:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.155 (still bad) 2011-Dec-20 04:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.154 (still bad) 2011-Dec-20 04:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.155 (still bad) 2011-Dec-20 04:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.155 (still bad) 2011-Dec-20 04:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.154 (still bad) 2011-Dec-20 04:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-20 04:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-20 04:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 04:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:08:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:08:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.899 1.121 0.949 0.953 2011-Dec-20 04:08:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 1.014 1.121 0.914 2011-Dec-20 04:08:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.868 0.897 0.991 1.150 2011-Dec-20 04:08:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.954 0.014 1.042 0.014 2011-Dec-20 04:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 04:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 04:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 04:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-20 04:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 04:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 04:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 04:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 04:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.153 (still bad) 2011-Dec-20 04:09:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:09:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.902 1.127 0.965 0.969 2011-Dec-20 04:09:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 1.005 1.113 0.907 2011-Dec-20 04:09:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.871 0.905 0.992 1.153 2011-Dec-20 04:09:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.963 0.014 1.050 0.014 2011-Dec-20 04:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.153 (still bad) 2011-Dec-20 04:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.158 (still bad) 2011-Dec-20 04:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.164 (still bad) 2011-Dec-20 04:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.171 (still bad) 2011-Dec-20 04:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.179 (still bad) 2011-Dec-20 04:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.189 (still bad) 2011-Dec-20 04:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.195 (still bad) 2011-Dec-20 04:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.199 (still bad) 2011-Dec-20 04:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.198 (still bad) 2011-Dec-20 04:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.195 (still bad) 2011-Dec-20 04:10:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-20 04:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.192 (still bad) 2011-Dec-20 04:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.192 (still bad) 2011-Dec-20 04:10:06 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-20 04:10:06 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-20 04:10:06 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-20 04:10:06 LOG5 end_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2011-Dec-20 04:10:06 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-20 04:10:06 LOG5 end_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2011-Dec-20 04:10:06 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-20 04:10:06 LOG5 finish_task: Level: (2) ID = <10064> Status = 0 0 0 0 ok 2011-Dec-20 04:10:06 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-20 04:10:06 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-20 04:10:06 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-20 04:10:06 LOG5 end_task: Level: (2) ID = <10064> Status = 0 0 0 0 ok 2011-Dec-20 04:10:06 COMMAND run_command_line: EXECUTING command 20: 'ENDIF' 2011-Dec-20 04:10:06 COMMAND run_command_line: EXECUTING command 23: 'IF LSTSLEW(AGES3193_p3_026) < 094041 THEN' 2011-Dec-20 04:10:06 LOG3 is_if_valid: Current source data: up 217.5 6.2 UP - - 98 1.5 2011-Dec-20 04:10:06 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_026) < 094041 2011-Dec-20 04:10:06 INFO5 is_if_valid: Condition parsed as: 9.6472840000000009 < 9.6780555555555541 2011-Dec-20 04:10:06 COMMAND run_command_line: EXECUTING command 24: 'FIXEDDRIFT az=211.54 alfaangle=-9.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_026 ra=95300.00 dec=231530.00' 2011-Dec-20 04:10:06 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-20 04:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.192 (still bad) 2011-Dec-20 04:10:07 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-20 04:10:07 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 211.54 -9.7 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_026 95300.00 231530.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-20 04:10:07 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-20 04:10:07 LOG5 begin_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2011-Dec-20 04:10:07 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_024' 2011-Dec-20 04:10:07 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-20 04:10:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_026} 2011-Dec-20 04:10:07 INFO3 fixed_driftmap: Sending telescope to Az = 211.54 and ZA = 5.72 2011-Dec-20 04:10:07 LOG3 track_source: Calling 'track_source AGES3193_p3_026 211.54 5.7174926823 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-20 04:10:07 START begin_task: Starting task 'sending tracking commands' 2011-Dec-20 04:10:07 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2011-Dec-20 04:10:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_026} INFO {Slewing to source 'AGES3193_p3_026' ...} 2011-Dec-20 04:10:07 INFO1 track_source: Starting to track AGES3193_p3_026 2011-Dec-20 04:10:07 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_026" 2011-Dec-20 04:10:07 LOG3 vw_send: To DATATAKING: set ra 211.54 2011-Dec-20 04:10:07 LOG3 vw_send: To DATATAKING: set dec 5.7174926823 2011-Dec-20 04:10:07 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-20 04:10:07 LOG3 vw_send: To DATATAKING: pnt tr 211.54 5.7174926823 -CF 2011-Dec-20 04:10:07 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 04:10:07 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-20 04:10:07 LOG5 finish_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2011-Dec-20 04:10:07 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-20 04:10:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 04:10:07 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-20 04:10:07 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2011-Dec-20 04:10:07 START begin_task: Starting task 'rotate ALFA to -9.7 degrees' 2011-Dec-20 04:10:07 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2011-Dec-20 04:10:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -9.7 degrees ...} 2011-Dec-20 04:10:07 INFO2 rotate_alfa: ALFA commanded to -9.7 degrees 2011-Dec-20 04:10:07 LOG3 sock_errsend: To ALFAMOTOR: POSITION -9.7 REPLY 2011-Dec-20 04:10:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-20 04:10:07 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-20 04:10:07 LOG5 begin_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2011-Dec-20 04:10:07 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_026" 2011-Dec-20 04:10:07 LOG4 got_cormsg: From DATATAKING: set ra 211.54 2011-Dec-20 04:10:07 LOG4 got_cormsg: From DATATAKING: set dec 5.7174926823 2011-Dec-20 04:10:07 LOG4 got_cormsg: From DATATAKING: vw% 211.54 2011-Dec-20 04:10:07 LOG4 got_cormsg: From DATATAKING: vw% 5.7174926823 2011-Dec-20 04:10:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 04:10:07 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-20 04:10:07 LOG4 got_cormsg: From DATATAKING: pnt tr 211.54 5.7174926823 -CF 2011-Dec-20 04:10:07 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 04:10:07 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-20 04:10:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 04:10:24 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-20 04:10:24 INFO3 alfa_motor: ALFA rotator in-position -9.70 degrees 2011-Dec-20 04:10:24 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-20 04:10:24 LOG5 end_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2011-Dec-20 04:10:24 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-20 04:10:24 STOP finish_task: Finishing task 'rotate ALFA to -9.7 degrees' 2011-Dec-20 04:10:24 LOG5 finish_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2011-Dec-20 04:10:24 INFO2 finish_task: DONE finished configuration: rotating ALFA to -9.7 degrees 2011-Dec-20 04:10:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 04:10:24 STOP end_task: Finishing task 'rotate ALFA to -9.7 degrees' with status 'OK' 2011-Dec-20 04:10:24 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2011-Dec-20 04:10:24 START begin_task: Starting task 'waiting on telescope' 2011-Dec-20 04:10:24 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2011-Dec-20 04:10:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-20 04:10:24 LOG3 waittrk: Start waittrk 5 2011-Dec-20 04:10:24 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-20 04:10:24 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2011-Dec-20 04:10:29 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-20 04:10:29 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2011-Dec-20 04:10:29 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-20 04:10:29 LOG5 begin_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2011-Dec-20 04:11:55 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-20 04:11:55 LOG5 end_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2011-Dec-20 04:11:55 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-20 04:11:55 INFO2 waittrk: Now tracking AGES3193_p3_026 2011-Dec-20 04:11:55 LOG4 waittrk: Current telescope position: Az = 211.13 ZA = 5.73 2011-Dec-20 04:11:55 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-20 04:11:55 LOG5 finish_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2011-Dec-20 04:11:55 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-20 04:11:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 04:11:55 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-20 04:11:55 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2011-Dec-20 04:11:55 START begin_task: Starting task 'selecting calibration type' 2011-Dec-20 04:11:55 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2011-Dec-20 04:11:55 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-20 04:11:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-20 04:11:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 04:11:55 START begin_task: Starting task 'waiting on setcal' 2011-Dec-20 04:11:55 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2011-Dec-20 04:11:55 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-20 04:11:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 04:11:56 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 04:11:56 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-20 04:11:56 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-20 04:11:56 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2011-Dec-20 04:11:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-20 04:11:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-20 04:11:56 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-20 04:11:56 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-20 04:11:56 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2011-Dec-20 04:11:56 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 04:11:56 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-20 04:11:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-20 04:11:56 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2011-Dec-20 04:11:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-20 04:11:56 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-20 04:11:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-20 04:11:56 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-20 04:11:56 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-20 04:11:56 LOG5 begin_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2011-Dec-20 04:11:56 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-20 04:11:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-20 04:11:56 LOG5 end_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2011-Dec-20 04:11:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-20 04:11:56 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-20 04:11:56 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-20 04:11:56 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2011-Dec-20 04:11:56 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Dec-20 04:11:57 INFO2 astwait: Waiting for 29 seconds from 08:11:57 to 08:12:26 UTC ... 2011-Dec-20 04:11:57 LOG4 send_obs_status: To obs_status: <1> TASKTIME 29 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-20 04:11:57 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Dec-20 04:11:57 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2011-Dec-20 04:12:26 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Dec-20 04:12:26 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2011-Dec-20 04:12:26 INFO3 astwait: Finished waiting 2011-Dec-20 04:12:26 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-20 04:12:26 LOG5 dopset_later: Calling 'dopset_later 61.383156200815954' 2011-Dec-20 04:12:26 INFO3 dopset_later: Setting Doppler correction for 04:13:26 (61.4 seconds from now) 2011-Dec-20 04:12:26 LOG5 antvel: Calling 'antvel 211.540000 5.717493 F Heliocentric 61.383156200815954' 2011-Dec-20 04:12:26 LOG2 antvel: Transforming current Az = 211.54 ZA = 5.72 to apparent RA = 09:53:42.0 Dec = +23:11:51.7 2011-Dec-20 04:12:26 LOG2 antvel: Parameters to Doppler: Heliocentric 29606 2011 354 0.0 2011-Dec-20 04:12:26 INFO5 antvel: Computed antenna velocity: -24.25538 km/s 2011-Dec-20 04:12:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-24.255382126299999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-20 04:12:26 INFO4 dopset_gen: New sky frequencies: 1381.355190 1381.355190 1381.355190 1381.355190 1381.355190 1381.355190 1381.355190 1381.355190 1381.355190 2011-Dec-20 04:12:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.355190 sky0=1381.355190 sky1=1381.355190 sky2=1381.355190 sky3=1381.355190 sky4=1381.355190 sky5=1381.355190 sky6=1381.355190 sky7=1381.355190 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-20 04:12:26 LOG2 dopset_gen: Result from 'sky2syn': 1631.355190 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-20 04:12:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631355190.0} 2011-Dec-20 04:12:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 04:12:26 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-20 04:12:26 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-20 04:12:26 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.2 Dec = +23:15:15.4 2011-Dec-20 04:12:26 LOG3 track_source: Calling 'track_source AGES3193_p3_026 095203.2 231515.4 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-20 04:12:26 START begin_task: Starting task 'sending tracking commands' 2011-Dec-20 04:12:26 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2011-Dec-20 04:12:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_026} INFO {Slewing to source 'AGES3193_p3_026' ...} 2011-Dec-20 04:12:26 INFO1 track_source: Starting to track AGES3193_p3_026 2011-Dec-20 04:12:26 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_026" 2011-Dec-20 04:12:26 LOG3 vw_send: To DATATAKING: set ra 095203.2 2011-Dec-20 04:12:26 LOG3 vw_send: To DATATAKING: set dec 231515.4 2011-Dec-20 04:12:26 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-20 04:12:26 LOG3 vw_send: To DATATAKING: pnt tr 095203.2 231515.4 -CJ 2011-Dec-20 04:12:26 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 04:12:26 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-20 04:12:26 LOG5 finish_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2011-Dec-20 04:12:26 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-20 04:12:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 04:12:26 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-20 04:12:26 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2011-Dec-20 04:12:26 START begin_task: Starting task 'waiting on telescope' 2011-Dec-20 04:12:26 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2011-Dec-20 04:12:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-20 04:12:26 LOG3 waittrk: Start waittrk 5 2011-Dec-20 04:12:26 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-20 04:12:26 LOG5 begin_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2011-Dec-20 04:12:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631355190.0} 2011-Dec-20 04:12:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 04:12:26 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-20 04:12:26 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_026" 2011-Dec-20 04:12:26 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 04:12:26 LOG4 got_cormsg: From DATATAKING: set ra 095203.2 2011-Dec-20 04:12:26 LOG4 got_cormsg: From DATATAKING: set dec 231515.4 2011-Dec-20 04:12:26 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-20 04:12:26 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.2 231515.4 -CJ 2011-Dec-20 04:12:26 LOG4 got_cormsg: From DATATAKING: 095203.2 2011-Dec-20 04:12:26 LOG4 got_cormsg: From DATATAKING: vw% 231515.4 2011-Dec-20 04:12:26 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2011-Dec-20 04:12:26 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 04:12:26 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 04:12:31 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-20 04:12:31 LOG5 end_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2011-Dec-20 04:12:31 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-20 04:12:31 LOG5 begin_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2011-Dec-20 04:12:33 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-20 04:12:33 LOG5 end_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2011-Dec-20 04:12:33 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-20 04:12:33 INFO2 waittrk: Now tracking AGES3193_p3_026 2011-Dec-20 04:12:33 LOG4 waittrk: Current telescope position: Az = 211.01 ZA = 5.72 2011-Dec-20 04:12:33 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-20 04:12:33 LOG5 finish_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2011-Dec-20 04:12:33 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-20 04:12:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 04:12:33 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-20 04:12:33 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2011-Dec-20 04:12:33 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-20 04:12:33 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2011-Dec-20 04:12:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-20 04:12:33 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-20 04:12:33 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-20 04:12:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-20 04:12:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 04:12:33 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-20 04:12:33 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2011-Dec-20 04:12:34 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-20 04:12:34 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 04:12:36 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 04:12:36 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-20 04:12:36 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-20 04:12:36 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2011-Dec-20 04:12:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-20 04:12:36 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-20 04:12:36 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2011-Dec-20 04:12:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-20 04:12:36 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-20 04:12:36 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-20 04:12:36 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-20 04:12:36 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-20 04:12:36 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-20 04:12:36 LOG5 begin_task: Level: (5) ID = <10126> Status = 0 0 0 0 ok 2011-Dec-20 04:12:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-20 04:12:37 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 04:12:37 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 8 6 dB 2011-Dec-20 04:12:37 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 3 dB 2011-Dec-20 04:12:37 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 3 dB 2011-Dec-20 04:12:37 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2011-Dec-20 04:12:37 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-20 04:12:37 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-20 04:12:37 LOG5 end_task: Level: (5) ID = <10126> Status = 0 0 0 0 ok 2011-Dec-20 04:12:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.091 1.105 ALFA beam 1: 0.914 0.941 2011-Dec-20 04:12:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.916 0.997 ALFA beam 3: 1.089 0.904 2011-Dec-20 04:12:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.862 1.112 ALFA beam 5: 0.946 1.096 2011-Dec-20 04:12:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.111 0.014 ALFA beam 7: 0.970 0.014 2011-Dec-20 04:12:37 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-20 04:12:37 LOG5 finish_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2011-Dec-20 04:12:37 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-20 04:12:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 04:12:37 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-20 04:12:37 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2011-Dec-20 04:12:37 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-20 04:12:37 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2011-Dec-20 04:12:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-20 04:12:37 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-20 04:12:37 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-20 04:12:37 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-20 04:12:37 LOG5 begin_task: Level: (5) ID = <10128> Status = 0 0 0 0 ok 2011-Dec-20 04:12:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:12:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.091 1.105 0.914 0.941 2011-Dec-20 04:12:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 0.997 1.089 0.904 2011-Dec-20 04:12:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.862 1.112 0.946 1.096 2011-Dec-20 04:12:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.111 0.014 0.970 0.014 2011-Dec-20 04:12:43 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.5 27.7 B 30.7 30.8 mn:A -0.0 -0.1 B -0.4 -0.4 gn: 11 11 2011-Dec-20 04:12:43 INFO3 from_mock: From MOCK: b0s1g0 rms:A 31.6 30.2 B 28.5 30.1 mn:A -0.1 -0.5 B -0.7 0.1 gn: 12 11 2011-Dec-20 04:12:43 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.9 28.9 B 33.4 29.2 mn:A 0.3 0.7 B 0.1 -0.0 gn: 7 11 2011-Dec-20 04:12:43 INFO3 from_mock: From MOCK: b1s1g0 rms:A 30.1 27.8 B 28.3 28.3 mn:A -0.3 -0.3 B 0.6 0.2 gn: 8 9 2011-Dec-20 04:12:43 INFO3 from_mock: From MOCK: b2s0g0 rms:A 28.7 27.9 B 28.3 29.7 mn:A 0.0 -0.3 B 0.2 0.0 gn: 10 11 2011-Dec-20 04:12:43 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.4 29.7 B 29.1 27.0 mn:A 0.2 -0.4 B -0.2 0.1 gn: 11 11 2011-Dec-20 04:12:43 INFO3 from_mock: From MOCK: b3s0g0 rms:A 29.5 29.2 B 31.4 28.1 mn:A 0.4 -0.2 B 0.1 -0.3 gn: 12 12 2011-Dec-20 04:12:43 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.7 30.0 B 29.8 31.0 mn:A -0.3 0.3 B 0.1 0.1 gn: 12 12 2011-Dec-20 04:12:43 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.9 30.0 B 28.1 28.2 mn:A -0.3 -0.3 B -0.3 -0.0 gn: 13 11 2011-Dec-20 04:12:43 INFO3 from_mock: From MOCK: b4s1g0 rms:A 33.0 29.9 B 30.5 29.4 mn:A -0.1 -0.0 B -0.4 0.2 gn: 16 13 2011-Dec-20 04:12:43 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.3 28.2 B 30.5 30.5 mn:A 0.6 0.4 B -0.0 0.3 gn: 12 11 2011-Dec-20 04:12:43 INFO3 from_mock: From MOCK: b5s1g0 rms:A 29.3 29.1 B 27.4 27.2 mn:A -0.4 0.2 B -0.1 0.2 gn: 12 10 2011-Dec-20 04:12:43 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.9 30.2 B 14.4 14.8 mn:A -0.5 0.1 B 0.4 -0.5 gn: 13 31 2011-Dec-20 04:12:43 INFO3 from_mock: From MOCK: b6s1g0 rms:A 29.8 27.1 B 11.4 11.1 mn:A 0.6 0.5 B 0.1 0.2 gn: 13 31 2011-Dec-20 04:12:43 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-20 04:12:43 LOG5 end_task: Level: (5) ID = <10128> Status = 0 0 0 0 ok 2011-Dec-20 04:12:43 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-20 04:12:43 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-20 04:12:43 LOG5 finish_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2011-Dec-20 04:12:43 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-20 04:12:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 04:12:43 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-20 04:12:43 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2011-Dec-20 04:12:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-20 04:12:43 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-20 04:12:43 LOG5 finish_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2011-Dec-20 04:12:43 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-20 04:12:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 04:12:43 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-20 04:12:43 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2011-Dec-20 04:12:43 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ep 2011-Dec-20 04:12:43 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ep 2011-Dec-20 04:12:43 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ep 2011-Dec-20 04:12:43 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ep 2011-Dec-20 04:12:43 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-20 04:12:43 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-20 04:12:43 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2011-Dec-20 04:12:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-20 04:12:43 START begin_task: Starting task 'selecting calibration type' 2011-Dec-20 04:12:43 LOG5 begin_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2011-Dec-20 04:12:43 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-20 04:12:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-20 04:12:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 04:12:43 START begin_task: Starting task 'waiting on setcal' 2011-Dec-20 04:12:43 LOG5 begin_task: Level: (5) ID = <10131> Status = 0 0 0 0 ok 2011-Dec-20 04:12:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ep' 2011-Dec-20 04:12:43 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-20 04:12:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 04:12:44 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 04:12:44 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-20 04:12:44 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-20 04:12:44 LOG5 end_task: Level: (5) ID = <10131> Status = 0 0 0 0 ok 2011-Dec-20 04:12:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-20 04:12:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-20 04:12:44 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-20 04:12:44 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-20 04:12:44 LOG5 begin_task: Level: (5) ID = <10132> Status = 0 0 0 0 ok 2011-Dec-20 04:12:44 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 04:12:44 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-20 04:12:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-20 04:12:44 LOG5 end_task: Level: (5) ID = <10132> Status = 0 0 0 0 ok 2011-Dec-20 04:12:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-20 04:12:44 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-20 04:12:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-20 04:12:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-20 04:12:44 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-20 04:12:44 LOG5 begin_task: Level: (5) ID = <10133> Status = 0 0 0 0 ok 2011-Dec-20 04:12:44 NOTE WAPPDATA-new_file: New FITS file: wapp.20111220.a2048.0003.fits 2011-Dec-20 04:12:44 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-20 04:12:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-20 04:12:44 LOG5 end_task: Level: (5) ID = <10133> Status = 0 0 0 0 ok 2011-Dec-20 04:12:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-20 04:12:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-20 04:12:44 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-20 04:12:44 LOG5 end_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2011-Dec-20 04:12:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-20 04:12:44 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-20 04:12:44 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-20 04:12:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-20 04:12:44 LOG5 begin_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2011-Dec-20 04:12:44 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111220.a2048.0003.fits} 2011-Dec-20 04:12:44 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-20 04:12:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-20 04:12:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-20 04:12:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-20 04:12:44 LOG5 end_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2011-Dec-20 04:12:44 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-20 04:12:44 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-20 04:12:44 LOG5 begin_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2011-Dec-20 04:12:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-20 04:12:44 LOG5 log_alfabeam: Parameters: 9.8675555555555547 23.254277777777776 9.666572 2011.9696796968083 -9.700104 2011-Dec-20 04:12:44 LOG4 log_alfabeam: ALFABEAM 0 9.867555555555549 23.254277777777773 2011-Dec-20 04:12:44 LOG4 log_alfabeam: ALFABEAM 1 9.867915487664449 23.153924109477760 2011-Dec-20 04:12:44 LOG4 log_alfabeam: ALFABEAM 2 9.873774543012887 23.220829867289169 2011-Dec-20 04:12:44 LOG4 log_alfabeam: ALFABEAM 3 9.873396824928010 23.321766368087850 2011-Dec-20 04:12:44 LOG4 log_alfabeam: ALFABEAM 4 9.867068651377931 23.355018047574976 2011-Dec-20 04:12:44 LOG4 log_alfabeam: ALFABEAM 5 9.861313519571976 23.286162947048172 2011-Dec-20 04:12:44 LOG4 log_alfabeam: ALFABEAM 6 9.861781777728012 23.186000441766950 2011-Dec-20 04:12:44 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-20 04:12:44 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-20 04:12:44 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-20 04:12:44 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_026 2011-Dec-20 04:12:44 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-20 04:12:44 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-20 04:12:44 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-20 04:12:44 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-20 04:12:44 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-20 04:12:44 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-20 04:12:44 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-20 04:12:44 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-20 04:12:44 LOG3 take_mock_data: PSET configuration: patternid=135400066 2011-Dec-20 04:12:44 LOG3 take_mock_data: PSET configuration: scanid=135400067 2011-Dec-20 04:12:44 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-20 04:12:44 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-20 04:12:44 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-20 04:12:44 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456355190.0 2011-Dec-20 04:12:44 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306355190.0 2011-Dec-20 04:12:44 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-20 04:12:44 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-20 04:12:44 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_026:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=135400066:scanid=135400067:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456355190.0:topobfreqhz=1306355190.0:filetype=1 2011-Dec-20 04:12:44 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-20 04:12:44 LOG5 begin_task: Level: (5) ID = <10136> Status = 0 0 0 0 ok 2011-Dec-20 04:12:44 LOG4 from_mock: From MOCK: psetok 2011-Dec-20 04:12:44 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-20 04:12:44 LOG5 end_task: Level: (5) ID = <10136> Status = 0 0 0 0 ok 2011-Dec-20 04:12:44 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-20 04:12:44 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-20 04:12:44 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-20 04:12:44 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-20 04:12:44 LOG5 begin_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2011-Dec-20 04:12:45 LOG4 from_mock: From MOCK: starok 2011-Dec-20 04:12:45 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-20 04:12:45 LOG5 end_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2011-Dec-20 04:12:45 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-20 04:12:45 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135400067 2011-Dec-20 04:12:45 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-20 04:12:45 LOG5 begin_task: Level: (5) ID = <10138> Status = 0 0 0 0 ok 2011-Dec-20 04:12:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-20 04:12:45 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-20 04:12:45 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-20 04:12:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-20 04:12:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29566.00 2011-Dec-20 04:12:47 INFO2 got_mock_message: Mock spectrometer start file number is 00600 2011-Dec-20 04:12:47 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-20 04:12:47 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-20 04:12:47 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-20 04:12:47 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-20 04:12:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-20 04:12:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-20 04:12:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-20 04:12:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-20 04:12:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-20 04:12:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-20 04:12:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-20 04:12:47 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-20 04:12:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 04:12:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 04:12:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 04:12:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 04:12:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 04:12:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 04:12:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 04:12:50 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:12:50.02 2011-Dec-20 04:12:50 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324368770.02 Tue Dec 20 04:12:50 2011 2011-Dec-20 04:12:50 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-20 04:12:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.355190 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-20 04:12:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.355190 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2011-Dec-20 04:12:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.355190 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2011-Dec-20 04:12:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.355190 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2011-Dec-20 04:12:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.355190 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2011-Dec-20 04:12:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.355190 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 04:12:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.355190 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 04:12:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.355190 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 04:12:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.355190 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 04:12:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-20 04:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.584 (still bad) 2011-Dec-20 04:12:56 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-20 04:12:56 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-20 04:12:56 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-20 04:12:56 LOG5 end_task: Level: (5) ID = <10138> Status = 0 0 0 0 ok 2011-Dec-20 04:12:56 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-20 04:12:56 LOG5 end_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2011-Dec-20 04:12:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-20 04:12:56 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-20 04:12:56 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-20 04:12:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-20 04:12:56 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2011-Dec-20 04:12:56 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-20 04:12:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-20 04:12:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-20 04:12:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-20 04:12:56 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2011-Dec-20 04:12:56 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-20 04:12:56 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-20 04:12:56 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2011-Dec-20 04:12:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-20 04:12:56 LOG5 log_alfabeam: Parameters: 9.8675555555555547 23.254277777777776 9.669636 2011.9696800453773 -9.700104 2011-Dec-20 04:12:56 LOG4 log_alfabeam: ALFABEAM 0 9.867555555555537 23.254277777777773 2011-Dec-20 04:12:56 LOG4 log_alfabeam: ALFABEAM 1 9.867963346656252 23.153959883748151 2011-Dec-20 04:12:56 LOG4 log_alfabeam: ALFABEAM 2 9.873790424898553 23.221394363635273 2011-Dec-20 04:12:56 LOG4 log_alfabeam: ALFABEAM 3 9.873364431306562 23.322295760583206 2011-Dec-20 04:12:56 LOG4 log_alfabeam: ALFABEAM 4 9.867020034173622 23.354972181860528 2011-Dec-20 04:12:56 LOG4 log_alfabeam: ALFABEAM 5 9.861298330493071 23.285590386410554 2011-Dec-20 04:12:56 LOG4 log_alfabeam: ALFABEAM 6 9.861814784015213 23.185474294967126 2011-Dec-20 04:12:56 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-20 04:12:56 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-20 04:12:56 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-20 04:12:56 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_026 2011-Dec-20 04:12:56 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-20 04:12:56 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-20 04:12:56 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-20 04:12:56 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-20 04:12:56 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-20 04:12:56 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-20 04:12:56 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-20 04:12:56 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-20 04:12:56 LOG3 take_mock_data: PSET configuration: patternid=135400066 2011-Dec-20 04:12:56 LOG3 take_mock_data: PSET configuration: scanid=135400068 2011-Dec-20 04:12:56 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-20 04:12:56 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-20 04:12:56 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-20 04:12:56 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456355190.0 2011-Dec-20 04:12:56 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306355190.0 2011-Dec-20 04:12:56 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-20 04:12:56 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-20 04:12:56 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_026:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=135400066:scanid=135400068:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456355190.0:topobfreqhz=1306355190.0:filetype=1 2011-Dec-20 04:12:56 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-20 04:12:56 LOG5 begin_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2011-Dec-20 04:12:56 LOG4 from_mock: From MOCK: psetok 2011-Dec-20 04:12:56 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-20 04:12:56 LOG5 end_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2011-Dec-20 04:12:56 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-20 04:12:56 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-20 04:12:56 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-20 04:12:56 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-20 04:12:56 LOG5 begin_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2011-Dec-20 04:12:56 LOG4 from_mock: From MOCK: starok 2011-Dec-20 04:12:56 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-20 04:12:56 LOG5 end_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2011-Dec-20 04:12:56 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-20 04:12:56 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135400068 2011-Dec-20 04:12:56 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-20 04:12:56 LOG5 begin_task: Level: (5) ID = <10143> Status = 0 0 0 0 ok 2011-Dec-20 04:12:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-20 04:12:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-20 04:12:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29577.00 2011-Dec-20 04:12:57 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-20 04:12:57 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-20 04:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.584 (still bad) 2011-Dec-20 04:12:58 INFO2 got_mock_message: Mock spectrometer start file number is 00700 2011-Dec-20 04:12:58 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-20 04:12:58 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-20 04:12:58 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-20 04:12:58 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-20 04:12:58 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-20 04:12:58 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-20 04:12:58 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-20 04:12:58 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-20 04:12:58 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-20 04:12:58 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-20 04:12:58 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-20 04:12:58 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-20 04:12:58 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 04:12:58 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 04:12:58 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 04:12:58 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 04:12:58 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 04:12:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 04:12:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 04:13:02 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:13:02.01 2011-Dec-20 04:13:02 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324368782.01 Tue Dec 20 04:13:02 2011 2011-Dec-20 04:13:02 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-20 04:13:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.355190 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-20 04:13:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.355190 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2011-Dec-20 04:13:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.355190 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2011-Dec-20 04:13:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.355190 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2011-Dec-20 04:13:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.355190 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2011-Dec-20 04:13:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.355190 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 04:13:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.355190 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 04:13:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.355190 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 04:13:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.355190 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 04:13:02 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-20 04:13:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-20 04:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:13:08 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-20 04:13:08 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-20 04:13:08 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-20 04:13:08 LOG5 end_task: Level: (5) ID = <10143> Status = 0 0 0 0 ok 2011-Dec-20 04:13:08 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-20 04:13:08 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2011-Dec-20 04:13:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-20 04:13:08 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-20 04:13:08 LOG5 finish_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2011-Dec-20 04:13:08 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-20 04:13:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 04:13:08 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-20 04:13:08 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2011-Dec-20 04:13:08 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-20 04:13:08 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 211.54 and ZA = 5.72 2011-Dec-20 04:13:08 LOG3 track_source: Calling 'track_source AGES3193_p3_026 211.54 5.7174926823 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-20 04:13:08 START begin_task: Starting task 'sending tracking commands' 2011-Dec-20 04:13:08 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2011-Dec-20 04:13:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_026} INFO {Slewing to source 'AGES3193_p3_026' ...} 2011-Dec-20 04:13:08 INFO1 track_source: Starting to track AGES3193_p3_026 2011-Dec-20 04:13:08 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_026" 2011-Dec-20 04:13:08 LOG3 vw_send: To DATATAKING: set ra 211.54 2011-Dec-20 04:13:08 LOG3 vw_send: To DATATAKING: set dec 5.7174926823 2011-Dec-20 04:13:08 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-20 04:13:08 LOG3 vw_send: To DATATAKING: pnt tr 211.54 5.7174926823 -CF 2011-Dec-20 04:13:08 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 04:13:08 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-20 04:13:08 LOG5 finish_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2011-Dec-20 04:13:08 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-20 04:13:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 04:13:08 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-20 04:13:08 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2011-Dec-20 04:13:08 LOG1 fixed_driftmap: Parameters: HA = -00:13:00.0 Start = 09:40:42.2 LST = 09:40:22.7 diff = 19.4 secs 2011-Dec-20 04:13:08 INFO2 fixed_driftmap: Waiting 17.4 seconds for RA 9:53:42 2011-Dec-20 04:13:08 INFO2 lstwait: Waiting for 17.4 secs from LST 09:40:23 to LST 09:40:40 ... 2011-Dec-20 04:13:08 LOG4 send_obs_status: To obs_status: <1> TASKTIME 17.390801789932507 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-20 04:13:08 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-20 04:13:08 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2011-Dec-20 04:13:08 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_026" 2011-Dec-20 04:13:08 LOG4 got_cormsg: From DATATAKING: set ra 211.54 2011-Dec-20 04:13:08 LOG4 got_cormsg: From DATATAKING: set dec 5.7174926823 2011-Dec-20 04:13:08 LOG4 got_cormsg: From DATATAKING: vw% 211.54 2011-Dec-20 04:13:08 LOG4 got_cormsg: From DATATAKING: vw% 5.7174926823 2011-Dec-20 04:13:08 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 04:13:08 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-20 04:13:08 LOG4 got_cormsg: From DATATAKING: pnt tr 211.54 5.7174926823 -CF 2011-Dec-20 04:13:08 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 04:13:08 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-20 04:13:08 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 04:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:13:25 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-20 04:13:25 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2011-Dec-20 04:13:25 LOG4 lstwait: Finished waiting 0.61 seconds late 2011-Dec-20 04:13:25 INFO3 lstwait: Finished waiting 2011-Dec-20 04:13:25 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-20 04:13:25 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-20 04:13:25 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-20 04:13:26 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-20 04:13:26 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-20 04:13:26 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-20 04:13:26 LOG5 begin_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2011-Dec-20 04:13:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-20 04:13:26 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-20 04:13:26 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-20 04:13:26 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-20 04:13:26 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-20 04:13:26 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_026 2011-Dec-20 04:13:26 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-20 04:13:26 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-20 04:13:26 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-20 04:13:26 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-20 04:13:26 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-20 04:13:26 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-20 04:13:26 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-20 04:13:26 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-20 04:13:26 LOG3 take_mock_data: PSET configuration: patternid=135400069 2011-Dec-20 04:13:26 LOG3 take_mock_data: PSET configuration: scanid=135400069 2011-Dec-20 04:13:26 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-20 04:13:26 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-20 04:13:26 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-20 04:13:26 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456355190.0 2011-Dec-20 04:13:26 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306355190.0 2011-Dec-20 04:13:26 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-20 04:13:26 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-20 04:13:26 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_026:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=135400069:scanid=135400069:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456355190.0:topobfreqhz=1306355190.0:filetype=1 2011-Dec-20 04:13:26 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-20 04:13:26 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2011-Dec-20 04:13:26 LOG4 from_mock: From MOCK: psetok 2011-Dec-20 04:13:26 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-20 04:13:26 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2011-Dec-20 04:13:26 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-20 04:13:26 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-20 04:13:26 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-20 04:13:26 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-20 04:13:26 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2011-Dec-20 04:13:26 LOG4 from_mock: From MOCK: starok 2011-Dec-20 04:13:26 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-20 04:13:26 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2011-Dec-20 04:13:26 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-20 04:13:26 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 135400069 2011-Dec-20 04:13:26 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-20 04:13:26 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2011-Dec-20 04:13:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-20 04:13:26 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-20 04:13:26 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-20 04:13:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-20 04:13:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29607.00 2011-Dec-20 04:13:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.355190 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-20 04:13:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.355190 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2011-Dec-20 04:13:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.355190 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2011-Dec-20 04:13:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.355190 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2011-Dec-20 04:13:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.355190 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2011-Dec-20 04:13:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.355190 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 04:13:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.355190 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 04:13:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.355190 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 04:13:28 INFO2 got_mock_message: Mock spectrometer start file number is 00800 2011-Dec-20 04:13:28 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-20 04:13:28 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2011-Dec-20 04:13:28 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-20 04:13:28 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-20 04:13:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-20 04:13:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-20 04:13:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-20 04:13:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-20 04:13:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.355190 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 04:13:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-20 04:13:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-20 04:13:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-20 04:13:28 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-20 04:13:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 04:13:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 04:13:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 04:13:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 04:13:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 04:13:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 04:13:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 04:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-20 04:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-20 04:13:31 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:13:31.01 2011-Dec-20 04:13:31 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324368811.01 Tue Dec 20 04:13:31 2011 2011-Dec-20 04:13:31 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-20 04:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 04:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 04:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:13:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:13:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.090 1.103 0.915 0.942 2011-Dec-20 04:13:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 0.998 1.084 0.902 2011-Dec-20 04:13:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.861 1.114 0.948 1.101 2011-Dec-20 04:13:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.112 0.014 0.971 0.014 2011-Dec-20 04:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 04:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 04:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 04:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 04:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:14:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:14:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.090 1.102 0.918 0.945 2011-Dec-20 04:14:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.913 0.995 1.084 0.902 2011-Dec-20 04:14:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.861 1.113 0.947 1.100 2011-Dec-20 04:14:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.113 0.014 0.973 0.014 2011-Dec-20 04:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 04:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 04:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 04:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:15:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:15:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:15:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.089 1.100 0.914 0.941 2011-Dec-20 04:15:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.913 0.996 1.087 0.906 2011-Dec-20 04:15:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.862 1.113 0.945 1.097 2011-Dec-20 04:15:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.110 0.014 0.971 0.014 2011-Dec-20 04:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 04:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 04:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:16:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:16:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:16:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.088 1.102 0.914 0.939 2011-Dec-20 04:16:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.913 0.994 1.083 0.901 2011-Dec-20 04:16:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.860 1.112 0.946 1.096 2011-Dec-20 04:16:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.110 0.014 0.969 0.014 2011-Dec-20 04:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:16:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:16:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:16:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:17:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:17:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.089 1.100 0.914 0.940 2011-Dec-20 04:17:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 0.997 1.084 0.902 2011-Dec-20 04:17:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.860 1.111 0.945 1.094 2011-Dec-20 04:17:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.116 0.014 0.974 0.014 2011-Dec-20 04:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:18:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:18:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.090 1.102 0.914 0.941 2011-Dec-20 04:18:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.914 0.995 1.083 0.901 2011-Dec-20 04:18:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.861 1.113 0.949 1.103 2011-Dec-20 04:18:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.113 0.014 0.971 0.014 2011-Dec-20 04:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:19:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:19:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.090 1.102 0.915 0.941 2011-Dec-20 04:19:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 0.996 1.082 0.901 2011-Dec-20 04:19:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.861 1.111 0.946 1.095 2011-Dec-20 04:19:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.112 0.014 0.970 0.014 2011-Dec-20 04:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:20:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:20:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.092 1.103 0.915 0.941 2011-Dec-20 04:20:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 0.997 1.086 0.902 2011-Dec-20 04:20:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.860 1.113 0.945 1.095 2011-Dec-20 04:20:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.111 0.014 0.970 0.014 2011-Dec-20 04:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:21:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:21:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.091 1.102 0.913 0.943 2011-Dec-20 04:21:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 0.998 1.085 0.903 2011-Dec-20 04:21:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.863 1.111 0.945 1.097 2011-Dec-20 04:21:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.112 0.014 0.972 0.014 2011-Dec-20 04:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:22:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:22:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.089 1.103 0.913 0.942 2011-Dec-20 04:22:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 0.999 1.084 0.902 2011-Dec-20 04:22:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.863 1.118 0.944 1.097 2011-Dec-20 04:22:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.113 0.014 0.972 0.014 2011-Dec-20 04:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 04:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 04:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 04:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 04:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 04:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 04:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 04:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:23:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:23:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.095 1.104 0.914 0.943 2011-Dec-20 04:23:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 0.996 1.087 0.904 2011-Dec-20 04:23:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.861 1.111 0.943 1.095 2011-Dec-20 04:23:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.111 0.014 0.972 0.014 2011-Dec-20 04:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 04:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 04:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-20 04:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-20 04:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-20 04:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-20 04:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-20 04:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-20 04:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-20 04:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 04:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 04:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 04:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:24:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:24:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.087 1.099 0.912 0.940 2011-Dec-20 04:24:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.920 1.001 1.082 0.901 2011-Dec-20 04:24:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.859 1.110 0.942 1.095 2011-Dec-20 04:24:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 0.014 0.970 0.014 2011-Dec-20 04:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 04:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 04:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-20 04:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 04:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-20 04:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-20 04:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-20 04:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 04:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-20 04:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-20 04:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-20 04:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 04:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:25:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:25:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.091 1.102 0.911 0.939 2011-Dec-20 04:25:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.920 1.000 1.084 0.903 2011-Dec-20 04:25:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.860 1.108 0.947 1.099 2011-Dec-20 04:25:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.112 0.014 0.973 0.014 2011-Dec-20 04:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 04:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 04:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-20 04:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-20 04:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-20 04:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-20 04:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-20 04:26:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:26:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.099 1.109 0.913 0.940 2011-Dec-20 04:26:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.921 1.000 1.084 0.901 2011-Dec-20 04:26:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.858 1.107 0.946 1.097 2011-Dec-20 04:26:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.138 0.014 0.996 0.014 2011-Dec-20 04:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-20 04:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-20 04:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 04:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 04:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 04:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 04:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 04:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 04:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:27:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:27:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.092 1.102 0.913 0.940 2011-Dec-20 04:27:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 0.998 1.085 0.901 2011-Dec-20 04:27:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.860 1.110 0.946 1.095 2011-Dec-20 04:27:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.112 0.014 0.972 0.014 2011-Dec-20 04:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:28:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:29:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:29:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.090 1.103 0.918 0.942 2011-Dec-20 04:29:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 0.996 1.083 0.901 2011-Dec-20 04:29:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.861 1.109 0.946 1.094 2011-Dec-20 04:29:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.112 0.014 0.970 0.014 2011-Dec-20 04:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:30:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:30:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.092 1.102 0.923 0.950 2011-Dec-20 04:30:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.919 1.000 1.085 0.903 2011-Dec-20 04:30:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.862 1.110 0.946 1.096 2011-Dec-20 04:30:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.114 0.014 0.973 0.014 2011-Dec-20 04:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 04:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 04:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 04:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-20 04:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-20 04:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-20 04:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-20 04:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-20 04:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 04:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 04:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 04:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:31:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:31:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.090 1.102 0.915 0.941 2011-Dec-20 04:31:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.913 0.995 1.086 0.905 2011-Dec-20 04:31:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.862 1.112 0.949 1.095 2011-Dec-20 04:31:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.112 0.014 0.971 0.014 2011-Dec-20 04:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:31:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 04:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 04:32:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:32:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.091 1.102 0.914 0.940 2011-Dec-20 04:32:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.920 1.000 1.085 0.903 2011-Dec-20 04:32:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.859 1.108 0.950 1.097 2011-Dec-20 04:32:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.110 0.014 0.971 0.014 2011-Dec-20 04:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 04:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 04:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 04:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 04:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 04:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 04:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-20 04:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-20 04:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 04:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.163 (still bad) 2011-Dec-20 04:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.171 (still bad) 2011-Dec-20 04:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.175 (still bad) 2011-Dec-20 04:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.169 (still bad) 2011-Dec-20 04:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.159 (still bad) 2011-Dec-20 04:33:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:33:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.117 1.134 0.914 0.941 2011-Dec-20 04:33:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 0.994 1.083 0.902 2011-Dec-20 04:33:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.881 1.151 0.950 1.100 2011-Dec-20 04:33:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.147 0.014 1.002 0.014 2011-Dec-20 04:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-20 04:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-20 04:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 04:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 04:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 04:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-20 04:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-20 04:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-20 04:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-20 04:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-20 04:33:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-20 04:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 04:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 04:33:32 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-20 04:33:32 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-20 04:33:32 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-20 04:33:32 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2011-Dec-20 04:33:32 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-20 04:33:32 LOG5 end_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2011-Dec-20 04:33:32 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-20 04:33:32 LOG5 finish_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2011-Dec-20 04:33:32 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-20 04:33:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-20 04:33:32 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-20 04:33:32 LOG5 end_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2011-Dec-20 04:33:32 COMMAND run_command_line: EXECUTING command 27: 'ENDIF' 2011-Dec-20 04:33:32 COMMAND run_command_line: EXECUTING command 30: 'IF LSTSLEW(AGES3193_p3_028) < 100641 THEN' 2011-Dec-20 04:33:32 LOG3 is_if_valid: Current source data: up 161.1 5.1 UP - - 74 2.1 2011-Dec-20 04:33:32 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_028) < 100641 2011-Dec-20 04:33:32 INFO5 is_if_valid: Condition parsed as: 10.048909 < 10.111388888888888 2011-Dec-20 04:33:32 COMMAND run_command_line: EXECUTING command 31: 'FIXEDDRIFT az=148.19 alfaangle=48.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_028 ra=95300.00 dec=231230.00' 2011-Dec-20 04:33:32 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-20 04:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 04:33:33 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-20 04:33:33 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 148.19 48.2 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_028 95300.00 231230.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-20 04:33:33 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-20 04:33:33 LOG5 begin_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2011-Dec-20 04:33:33 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_026' 2011-Dec-20 04:33:33 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-20 04:33:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_028} 2011-Dec-20 04:33:33 INFO3 fixed_driftmap: Sending telescope to Az = 148.19 and ZA = 5.68 2011-Dec-20 04:33:33 LOG3 track_source: Calling 'track_source AGES3193_p3_028 148.19 5.6752835163 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-20 04:33:33 START begin_task: Starting task 'sending tracking commands' 2011-Dec-20 04:33:33 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2011-Dec-20 04:33:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_028} INFO {Slewing to source 'AGES3193_p3_028' ...} 2011-Dec-20 04:33:33 INFO1 track_source: Starting to track AGES3193_p3_028 2011-Dec-20 04:33:33 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_028" 2011-Dec-20 04:33:33 LOG3 vw_send: To DATATAKING: set ra 148.19 2011-Dec-20 04:33:33 LOG3 vw_send: To DATATAKING: set dec 5.6752835163 2011-Dec-20 04:33:33 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-20 04:33:33 LOG3 vw_send: To DATATAKING: pnt tr 148.19 5.6752835163 -CF 2011-Dec-20 04:33:33 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 04:33:33 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-20 04:33:33 LOG5 finish_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2011-Dec-20 04:33:33 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-20 04:33:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 04:33:33 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-20 04:33:33 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2011-Dec-20 04:33:33 START begin_task: Starting task 'rotate ALFA to +48.2 degrees' 2011-Dec-20 04:33:33 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2011-Dec-20 04:33:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +48.2 degrees ...} 2011-Dec-20 04:33:33 INFO2 rotate_alfa: ALFA commanded to +48.2 degrees 2011-Dec-20 04:33:33 LOG3 sock_errsend: To ALFAMOTOR: POSITION 48.2 REPLY 2011-Dec-20 04:33:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-20 04:33:33 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-20 04:33:33 LOG5 begin_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2011-Dec-20 04:33:33 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_028" 2011-Dec-20 04:33:33 LOG4 got_cormsg: From DATATAKING: set ra 148.19 2011-Dec-20 04:33:33 LOG4 got_cormsg: From DATATAKING: set dec 5.6752835163 2011-Dec-20 04:33:33 LOG4 got_cormsg: From DATATAKING: vw% 148.19 2011-Dec-20 04:33:33 LOG4 got_cormsg: From DATATAKING: vw% 5.6752835163 2011-Dec-20 04:33:33 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 04:33:33 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-20 04:33:33 LOG4 got_cormsg: From DATATAKING: pnt tr 148.19 5.6752835163 -CF 2011-Dec-20 04:33:33 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 04:33:33 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-20 04:33:33 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 04:34:06 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-20 04:34:06 INFO3 alfa_motor: ALFA rotator in-position +48.20 degrees 2011-Dec-20 04:34:06 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-20 04:34:06 LOG5 end_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2011-Dec-20 04:34:06 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-20 04:34:06 STOP finish_task: Finishing task 'rotate ALFA to +48.2 degrees' 2011-Dec-20 04:34:06 LOG5 finish_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2011-Dec-20 04:34:06 INFO2 finish_task: DONE finished configuration: rotating ALFA to +48.2 degrees 2011-Dec-20 04:34:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 04:34:06 STOP end_task: Finishing task 'rotate ALFA to +48.2 degrees' with status 'OK' 2011-Dec-20 04:34:06 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2011-Dec-20 04:34:06 START begin_task: Starting task 'waiting on telescope' 2011-Dec-20 04:34:06 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2011-Dec-20 04:34:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-20 04:34:06 LOG3 waittrk: Start waittrk 5 2011-Dec-20 04:34:06 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-20 04:34:06 LOG5 begin_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2011-Dec-20 04:34:12 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-20 04:34:12 LOG5 end_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2011-Dec-20 04:34:12 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-20 04:34:12 LOG5 begin_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2011-Dec-20 04:36:17 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-20 04:36:17 LOG5 end_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2011-Dec-20 04:36:17 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-20 04:36:17 INFO2 waittrk: Now tracking AGES3193_p3_028 2011-Dec-20 04:36:17 LOG4 waittrk: Current telescope position: Az = 147.93 ZA = 5.69 2011-Dec-20 04:36:17 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-20 04:36:17 LOG5 finish_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2011-Dec-20 04:36:17 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-20 04:36:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 04:36:17 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-20 04:36:17 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2011-Dec-20 04:36:17 START begin_task: Starting task 'selecting calibration type' 2011-Dec-20 04:36:17 LOG5 begin_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2011-Dec-20 04:36:17 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-20 04:36:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-20 04:36:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 04:36:17 START begin_task: Starting task 'waiting on setcal' 2011-Dec-20 04:36:17 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2011-Dec-20 04:36:17 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-20 04:36:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 04:36:18 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 04:36:18 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-20 04:36:18 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-20 04:36:18 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2011-Dec-20 04:36:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-20 04:36:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-20 04:36:18 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-20 04:36:18 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-20 04:36:18 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2011-Dec-20 04:36:18 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 04:36:19 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-20 04:36:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-20 04:36:19 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2011-Dec-20 04:36:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-20 04:36:19 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-20 04:36:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-20 04:36:19 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-20 04:36:19 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-20 04:36:19 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2011-Dec-20 04:36:19 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-20 04:36:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-20 04:36:19 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2011-Dec-20 04:36:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-20 04:36:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-20 04:36:19 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-20 04:36:19 LOG5 end_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2011-Dec-20 04:36:19 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Dec-20 04:36:19 INFO2 astwait: Waiting for 123 seconds from 08:36:19 to 08:38:22 UTC ... 2011-Dec-20 04:36:19 LOG4 send_obs_status: To obs_status: <1> TASKTIME 123 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-20 04:36:19 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Dec-20 04:36:19 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2011-Dec-20 04:38:22 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Dec-20 04:38:22 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2011-Dec-20 04:38:22 INFO3 astwait: Finished waiting 2011-Dec-20 04:38:22 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-20 04:38:22 LOG5 dopset_later: Calling 'dopset_later 61.118588992894686' 2011-Dec-20 04:38:22 INFO3 dopset_later: Setting Doppler correction for 04:39:22 (61.1 seconds from now) 2011-Dec-20 04:38:22 LOG5 antvel: Calling 'antvel 148.190000 5.675284 F Heliocentric 61.118588992894686' 2011-Dec-20 04:38:22 LOG2 antvel: Transforming current Az = 148.19 ZA = 5.68 to apparent RA = 09:53:42.0 Dec = +23:08:51.7 2011-Dec-20 04:38:22 LOG2 antvel: Parameters to Doppler: Heliocentric 31162 2011 354 0.0 2011-Dec-20 04:38:22 INFO5 antvel: Computed antenna velocity: -24.21262 km/s 2011-Dec-20 04:38:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-24.2126193583 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-20 04:38:22 INFO4 dopset_gen: New sky frequencies: 1381.354993 1381.354993 1381.354993 1381.354993 1381.354993 1381.354993 1381.354993 1381.354993 1381.354993 2011-Dec-20 04:38:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.354993 sky0=1381.354993 sky1=1381.354993 sky2=1381.354993 sky3=1381.354993 sky4=1381.354993 sky5=1381.354993 sky6=1381.354993 sky7=1381.354993 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-20 04:38:22 LOG2 dopset_gen: Result from 'sky2syn': 1631.354993 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-20 04:38:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631354993.0} 2011-Dec-20 04:38:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 04:38:22 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-20 04:38:22 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-20 04:38:22 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.5 Dec = +23:12:15.4 2011-Dec-20 04:38:22 LOG3 track_source: Calling 'track_source AGES3193_p3_028 095203.5 231215.4 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-20 04:38:22 START begin_task: Starting task 'sending tracking commands' 2011-Dec-20 04:38:22 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2011-Dec-20 04:38:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_028} INFO {Slewing to source 'AGES3193_p3_028' ...} 2011-Dec-20 04:38:22 INFO1 track_source: Starting to track AGES3193_p3_028 2011-Dec-20 04:38:22 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_028" 2011-Dec-20 04:38:22 LOG3 vw_send: To DATATAKING: set ra 095203.5 2011-Dec-20 04:38:22 LOG3 vw_send: To DATATAKING: set dec 231215.4 2011-Dec-20 04:38:22 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-20 04:38:22 LOG3 vw_send: To DATATAKING: pnt tr 095203.5 231215.4 -CJ 2011-Dec-20 04:38:22 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 04:38:22 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-20 04:38:22 LOG5 finish_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2011-Dec-20 04:38:22 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-20 04:38:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 04:38:22 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-20 04:38:22 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2011-Dec-20 04:38:22 START begin_task: Starting task 'waiting on telescope' 2011-Dec-20 04:38:22 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2011-Dec-20 04:38:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-20 04:38:22 LOG3 waittrk: Start waittrk 5 2011-Dec-20 04:38:22 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-20 04:38:22 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2011-Dec-20 04:38:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631354993.0} 2011-Dec-20 04:38:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 04:38:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 04:38:22 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_028" 2011-Dec-20 04:38:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 04:38:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 04:38:22 LOG4 got_cormsg: From DATATAKING: set ra 095203.5 2011-Dec-20 04:38:22 LOG4 got_cormsg: From DATATAKING: set dec 231215.4 2011-Dec-20 04:38:22 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-20 04:38:22 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.5 231215.4 -CJ 2011-Dec-20 04:38:22 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 04:38:22 LOG4 got_cormsg: From DATATAKING: 095203.5 2011-Dec-20 04:38:22 LOG4 got_cormsg: From DATATAKING: vw% 231215.4 2011-Dec-20 04:38:22 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2011-Dec-20 04:38:27 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-20 04:38:27 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2011-Dec-20 04:38:27 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-20 04:38:27 LOG5 begin_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2011-Dec-20 04:38:29 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-20 04:38:29 LOG5 end_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2011-Dec-20 04:38:29 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-20 04:38:29 INFO2 waittrk: Now tracking AGES3193_p3_028 2011-Dec-20 04:38:29 LOG4 waittrk: Current telescope position: Az = 147.77 ZA = 5.69 2011-Dec-20 04:38:29 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-20 04:38:29 LOG5 finish_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2011-Dec-20 04:38:29 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-20 04:38:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 04:38:29 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-20 04:38:29 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2011-Dec-20 04:38:29 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-20 04:38:29 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2011-Dec-20 04:38:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-20 04:38:29 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-20 04:38:29 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-20 04:38:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-20 04:38:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 04:38:29 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-20 04:38:29 LOG5 begin_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2011-Dec-20 04:38:29 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-20 04:38:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 04:38:32 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 04:38:32 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-20 04:38:32 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-20 04:38:32 LOG5 end_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2011-Dec-20 04:38:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-20 04:38:32 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-20 04:38:32 LOG5 begin_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2011-Dec-20 04:38:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-20 04:38:32 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-20 04:38:32 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-20 04:38:32 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-20 04:38:32 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-20 04:38:32 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-20 04:38:32 LOG5 begin_task: Level: (5) ID = <10169> Status = 0 0 0 0 ok 2011-Dec-20 04:38:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-20 04:38:33 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 04:38:33 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 8 6 dB 2011-Dec-20 04:38:33 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 3 3 dB 2011-Dec-20 04:38:33 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 3 dB 2011-Dec-20 04:38:33 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2011-Dec-20 04:38:33 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-20 04:38:33 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-20 04:38:33 LOG5 end_task: Level: (5) ID = <10169> Status = 0 0 0 0 ok 2011-Dec-20 04:38:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.072 1.114 ALFA beam 1: 0.911 0.958 2011-Dec-20 04:38:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.926 1.012 ALFA beam 3: 1.088 0.903 2011-Dec-20 04:38:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.860 0.894 ALFA beam 5: 0.926 1.104 2011-Dec-20 04:38:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.067 0.014 ALFA beam 7: 0.931 0.014 2011-Dec-20 04:38:33 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-20 04:38:33 LOG5 finish_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2011-Dec-20 04:38:33 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-20 04:38:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 04:38:33 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-20 04:38:33 LOG5 end_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2011-Dec-20 04:38:33 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-20 04:38:33 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2011-Dec-20 04:38:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-20 04:38:33 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-20 04:38:33 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-20 04:38:33 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-20 04:38:33 LOG5 begin_task: Level: (5) ID = <10171> Status = 0 0 0 0 ok 2011-Dec-20 04:38:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:38:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.114 0.911 0.958 2011-Dec-20 04:38:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.926 1.012 1.088 0.903 2011-Dec-20 04:38:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.860 0.894 0.926 1.104 2011-Dec-20 04:38:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.067 0.014 0.931 0.014 2011-Dec-20 04:38:39 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.2 27.4 B 31.0 31.0 mn:A 0.2 0.0 B -0.3 -0.3 gn: 11 11 2011-Dec-20 04:38:39 INFO3 from_mock: From MOCK: b0s1g0 rms:A 38.1 36.5 B 29.6 31.3 mn:A 0.0 -0.5 B -0.6 0.1 gn: 12 11 2011-Dec-20 04:38:39 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.8 28.8 B 33.7 29.5 mn:A 0.5 0.7 B 0.2 -0.0 gn: 7 11 2011-Dec-20 04:38:39 INFO3 from_mock: From MOCK: b1s1g0 rms:A 30.7 28.3 B 29.2 29.2 mn:A -0.2 -0.3 B 0.5 0.1 gn: 8 9 2011-Dec-20 04:38:39 INFO3 from_mock: From MOCK: b2s0g0 rms:A 28.9 28.0 B 28.6 29.9 mn:A 0.1 -0.4 B 0.4 0.1 gn: 10 11 2011-Dec-20 04:38:39 INFO3 from_mock: From MOCK: b2s1g0 rms:A 35.2 35.5 B 29.8 27.6 mn:A 0.4 -0.3 B 0.1 0.2 gn: 11 11 2011-Dec-20 04:38:39 INFO3 from_mock: From MOCK: b3s0g0 rms:A 29.5 29.3 B 31.4 28.1 mn:A 0.4 -0.2 B 0.1 -0.3 gn: 12 12 2011-Dec-20 04:38:39 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.9 30.2 B 32.7 34.1 mn:A -0.3 0.4 B 0.1 0.1 gn: 12 12 2011-Dec-20 04:38:39 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.9 29.9 B 28.2 28.3 mn:A -0.2 -0.4 B -0.4 -0.1 gn: 13 11 2011-Dec-20 04:38:39 INFO3 from_mock: From MOCK: b4s1g0 rms:A 33.6 30.5 B 33.1 31.9 mn:A -0.0 -0.1 B -0.4 0.2 gn: 16 13 2011-Dec-20 04:38:39 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.0 27.9 B 30.6 30.6 mn:A 0.6 0.4 B -0.0 0.4 gn: 12 11 2011-Dec-20 04:38:39 INFO3 from_mock: From MOCK: b5s1g0 rms:A 31.5 31.3 B 31.0 30.8 mn:A -0.4 0.3 B -0.0 0.3 gn: 12 11 2011-Dec-20 04:38:39 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.3 29.6 B 15.4 15.9 mn:A -0.4 0.2 B 0.5 -0.5 gn: 13 31 2011-Dec-20 04:38:39 INFO3 from_mock: From MOCK: b6s1g0 rms:A 31.6 28.8 B 12.4 12.0 mn:A 0.5 0.6 B 0.0 0.2 gn: 13 31 2011-Dec-20 04:38:39 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-20 04:38:39 LOG5 end_task: Level: (5) ID = <10171> Status = 0 0 0 0 ok 2011-Dec-20 04:38:39 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-20 04:38:39 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-20 04:38:39 LOG5 finish_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2011-Dec-20 04:38:39 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-20 04:38:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 04:38:39 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-20 04:38:39 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2011-Dec-20 04:38:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-20 04:38:39 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-20 04:38:39 LOG5 finish_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2011-Dec-20 04:38:39 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-20 04:38:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 04:38:39 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-20 04:38:39 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2011-Dec-20 04:38:39 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ep 2011-Dec-20 04:38:39 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ep 2011-Dec-20 04:38:39 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ep 2011-Dec-20 04:38:39 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ep 2011-Dec-20 04:38:39 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-20 04:38:39 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-20 04:38:39 LOG5 begin_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2011-Dec-20 04:38:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-20 04:38:39 START begin_task: Starting task 'selecting calibration type' 2011-Dec-20 04:38:39 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2011-Dec-20 04:38:39 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-20 04:38:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-20 04:38:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 04:38:39 START begin_task: Starting task 'waiting on setcal' 2011-Dec-20 04:38:39 LOG5 begin_task: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2011-Dec-20 04:38:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ep' 2011-Dec-20 04:38:40 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-20 04:38:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 04:38:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 04:38:40 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-20 04:38:40 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-20 04:38:40 LOG5 end_task: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2011-Dec-20 04:38:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-20 04:38:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-20 04:38:40 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-20 04:38:40 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-20 04:38:40 LOG5 begin_task: Level: (5) ID = <10175> Status = 0 0 0 0 ok 2011-Dec-20 04:38:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 04:38:40 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-20 04:38:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-20 04:38:40 LOG5 end_task: Level: (5) ID = <10175> Status = 0 0 0 0 ok 2011-Dec-20 04:38:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-20 04:38:40 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-20 04:38:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-20 04:38:40 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-20 04:38:40 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-20 04:38:40 LOG5 begin_task: Level: (5) ID = <10176> Status = 0 0 0 0 ok 2011-Dec-20 04:38:40 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-20 04:38:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-20 04:38:40 LOG5 end_task: Level: (5) ID = <10176> Status = 0 0 0 0 ok 2011-Dec-20 04:38:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-20 04:38:40 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-20 04:38:40 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-20 04:38:40 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2011-Dec-20 04:38:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-20 04:38:40 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-20 04:38:40 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-20 04:38:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-20 04:38:40 LOG5 begin_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2011-Dec-20 04:38:40 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-20 04:38:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-20 04:38:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-20 04:38:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-20 04:38:40 LOG5 end_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2011-Dec-20 04:38:40 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-20 04:38:40 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-20 04:38:40 LOG5 begin_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2011-Dec-20 04:38:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-20 04:38:40 LOG5 log_alfabeam: Parameters: 9.8676388888888891 23.204277777777776 10.099977 2011.9697290034728 48.199993 2011-Dec-20 04:38:40 LOG4 log_alfabeam: ALFABEAM 0 9.867638888888894 23.204277777777776 2011-Dec-20 04:38:40 LOG4 log_alfabeam: ALFABEAM 1 9.870005848420570 23.104262391084287 2011-Dec-20 04:38:40 LOG4 log_alfabeam: ALFABEAM 2 9.874469081514263 23.170898481955817 2011-Dec-20 04:38:40 LOG4 log_alfabeam: ALFABEAM 3 9.872224598777443 23.271484921475164 2011-Dec-20 04:38:40 LOG4 log_alfabeam: ALFABEAM 4 9.865335196404340 23.304724956311620 2011-Dec-20 04:38:40 LOG4 log_alfabeam: ALFABEAM 5 9.860729053260403 23.236115162176713 2011-Dec-20 04:38:40 LOG4 log_alfabeam: ALFABEAM 6 9.863154979676688 23.136253054702379 2011-Dec-20 04:38:40 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-20 04:38:40 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-20 04:38:40 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-20 04:38:40 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_028 2011-Dec-20 04:38:40 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-20 04:38:40 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-20 04:38:40 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-20 04:38:40 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-20 04:38:40 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-20 04:38:40 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-20 04:38:40 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-20 04:38:40 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-20 04:38:40 LOG3 take_mock_data: PSET configuration: patternid=135400069 2011-Dec-20 04:38:40 LOG3 take_mock_data: PSET configuration: scanid=135400070 2011-Dec-20 04:38:40 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-20 04:38:40 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-20 04:38:40 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-20 04:38:40 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456354993.0 2011-Dec-20 04:38:40 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306354993.0 2011-Dec-20 04:38:40 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-20 04:38:40 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-20 04:38:40 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_028:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=135400069:scanid=135400070:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456354993.0:topobfreqhz=1306354993.0:filetype=1 2011-Dec-20 04:38:40 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-20 04:38:40 LOG5 begin_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2011-Dec-20 04:38:40 LOG4 from_mock: From MOCK: psetok 2011-Dec-20 04:38:40 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-20 04:38:40 LOG5 end_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2011-Dec-20 04:38:40 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-20 04:38:40 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-20 04:38:40 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-20 04:38:40 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-20 04:38:40 LOG5 begin_task: Level: (5) ID = <10180> Status = 0 0 0 0 ok 2011-Dec-20 04:38:40 NOTE WAPPDATA-new_file: New FITS file: wapp.20111220.a2048.0004.fits 2011-Dec-20 04:38:40 LOG4 from_mock: From MOCK: starok 2011-Dec-20 04:38:40 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-20 04:38:40 LOG5 end_task: Level: (5) ID = <10180> Status = 0 0 0 0 ok 2011-Dec-20 04:38:40 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-20 04:38:40 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135400070 2011-Dec-20 04:38:41 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-20 04:38:41 LOG5 begin_task: Level: (5) ID = <10181> Status = 0 0 0 0 ok 2011-Dec-20 04:38:41 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111220.a2048.0004.fits} 2011-Dec-20 04:38:41 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-20 04:38:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-20 04:38:41 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-20 04:38:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-20 04:38:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31122.00 2011-Dec-20 04:38:43 INFO2 got_mock_message: Mock spectrometer start file number is 00900 2011-Dec-20 04:38:43 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-20 04:38:43 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-20 04:38:43 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-20 04:38:43 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-20 04:38:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-20 04:38:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-20 04:38:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-20 04:38:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-20 04:38:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-20 04:38:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-20 04:38:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-20 04:38:43 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-20 04:38:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 04:38:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 04:38:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 04:38:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 04:38:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 04:38:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 04:38:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 04:38:46 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:38:46.01 2011-Dec-20 04:38:46 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324370326.01 Tue Dec 20 04:38:46 2011 2011-Dec-20 04:38:46 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-20 04:38:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.354993 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-20 04:38:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.354993 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2011-Dec-20 04:38:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.354993 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2011-Dec-20 04:38:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.354993 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2011-Dec-20 04:38:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.354993 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2011-Dec-20 04:38:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.354993 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 04:38:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.354993 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 04:38:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.354993 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 04:38:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.354993 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 04:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.532 (still bad) 2011-Dec-20 04:38:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-20 04:38:51 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-20 04:38:52 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-20 04:38:52 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-20 04:38:52 LOG5 end_task: Level: (5) ID = <10181> Status = 0 0 0 0 ok 2011-Dec-20 04:38:52 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-20 04:38:52 LOG5 end_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2011-Dec-20 04:38:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-20 04:38:52 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-20 04:38:52 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-20 04:38:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-20 04:38:52 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2011-Dec-20 04:38:52 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-20 04:38:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-20 04:38:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-20 04:38:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-20 04:38:52 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2011-Dec-20 04:38:52 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-20 04:38:52 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-20 04:38:52 LOG5 begin_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2011-Dec-20 04:38:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-20 04:38:52 LOG5 log_alfabeam: Parameters: 9.8676388888888891 23.204277777777776 10.103041 2011.9697293520419 48.199993 2011-Dec-20 04:38:52 LOG4 log_alfabeam: ALFABEAM 0 9.867638888888894 23.204277777777783 2011-Dec-20 04:38:52 LOG4 log_alfabeam: ALFABEAM 1 9.870052359699789 23.104473738827604 2011-Dec-20 04:38:52 LOG4 log_alfabeam: ALFABEAM 2 9.874484704979578 23.171508757838698 2011-Dec-20 04:38:52 LOG4 log_alfabeam: ALFABEAM 3 9.872192893751594 23.271892405265273 2011-Dec-20 04:38:52 LOG4 log_alfabeam: ALFABEAM 4 9.865288141665369 23.304517381400434 2011-Dec-20 04:38:52 LOG4 log_alfabeam: ALFABEAM 5 9.860714487186739 23.235503945091516 2011-Dec-20 04:38:52 LOG4 log_alfabeam: ALFABEAM 6 9.863186644348405 23.135857837032379 2011-Dec-20 04:38:52 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-20 04:38:52 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-20 04:38:52 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-20 04:38:52 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_028 2011-Dec-20 04:38:52 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-20 04:38:52 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-20 04:38:52 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-20 04:38:52 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-20 04:38:52 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-20 04:38:52 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-20 04:38:52 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-20 04:38:52 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-20 04:38:52 LOG3 take_mock_data: PSET configuration: patternid=135400069 2011-Dec-20 04:38:52 LOG3 take_mock_data: PSET configuration: scanid=135400071 2011-Dec-20 04:38:52 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-20 04:38:52 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-20 04:38:52 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-20 04:38:52 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456354993.0 2011-Dec-20 04:38:52 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306354993.0 2011-Dec-20 04:38:52 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-20 04:38:52 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-20 04:38:52 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_028:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=135400069:scanid=135400071:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456354993.0:topobfreqhz=1306354993.0:filetype=1 2011-Dec-20 04:38:52 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-20 04:38:52 LOG5 begin_task: Level: (5) ID = <10184> Status = 0 0 0 0 ok 2011-Dec-20 04:38:52 LOG4 from_mock: From MOCK: psetok 2011-Dec-20 04:38:52 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-20 04:38:52 LOG5 end_task: Level: (5) ID = <10184> Status = 0 0 0 0 ok 2011-Dec-20 04:38:52 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-20 04:38:52 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-20 04:38:52 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-20 04:38:52 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-20 04:38:52 LOG5 begin_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2011-Dec-20 04:38:52 LOG4 from_mock: From MOCK: starok 2011-Dec-20 04:38:52 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-20 04:38:52 LOG5 end_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2011-Dec-20 04:38:52 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-20 04:38:52 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135400071 2011-Dec-20 04:38:52 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-20 04:38:52 LOG5 begin_task: Level: (5) ID = <10186> Status = 0 0 0 0 ok 2011-Dec-20 04:38:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-20 04:38:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-20 04:38:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31133.00 2011-Dec-20 04:38:53 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-20 04:38:53 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-20 04:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.541 (still bad) 2011-Dec-20 04:38:55 INFO2 got_mock_message: Mock spectrometer start file number is 01000 2011-Dec-20 04:38:55 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-20 04:38:55 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-20 04:38:55 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-20 04:38:55 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-20 04:38:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-20 04:38:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-20 04:38:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-20 04:38:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-20 04:38:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-20 04:38:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-20 04:38:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-20 04:38:55 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-20 04:38:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 04:38:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 04:38:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 04:38:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 04:38:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 04:38:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 04:38:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 04:38:58 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:38:58.01 2011-Dec-20 04:38:58 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324370338.01 Tue Dec 20 04:38:58 2011 2011-Dec-20 04:38:58 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-20 04:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.354993 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-20 04:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.354993 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2011-Dec-20 04:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.354993 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2011-Dec-20 04:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.354993 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2011-Dec-20 04:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.354993 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2011-Dec-20 04:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.354993 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 04:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.354993 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 04:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.354993 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 04:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.354993 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 04:38:58 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-20 04:38:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-20 04:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:39:03 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-20 04:39:04 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-20 04:39:04 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-20 04:39:04 LOG5 end_task: Level: (5) ID = <10186> Status = 0 0 0 0 ok 2011-Dec-20 04:39:04 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-20 04:39:04 LOG5 end_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2011-Dec-20 04:39:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-20 04:39:04 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-20 04:39:04 LOG5 finish_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2011-Dec-20 04:39:04 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-20 04:39:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 04:39:04 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-20 04:39:04 LOG5 end_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2011-Dec-20 04:39:04 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-20 04:39:04 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 148.19 and ZA = 5.68 2011-Dec-20 04:39:04 LOG3 track_source: Calling 'track_source AGES3193_p3_028 148.19 5.6752835163 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-20 04:39:04 START begin_task: Starting task 'sending tracking commands' 2011-Dec-20 04:39:04 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2011-Dec-20 04:39:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_028} INFO {Slewing to source 'AGES3193_p3_028' ...} 2011-Dec-20 04:39:04 INFO1 track_source: Starting to track AGES3193_p3_028 2011-Dec-20 04:39:04 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_028" 2011-Dec-20 04:39:04 LOG3 vw_send: To DATATAKING: set ra 148.19 2011-Dec-20 04:39:04 LOG3 vw_send: To DATATAKING: set dec 5.6752835163 2011-Dec-20 04:39:04 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-20 04:39:04 LOG3 vw_send: To DATATAKING: pnt tr 148.19 5.6752835163 -CF 2011-Dec-20 04:39:04 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 04:39:04 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-20 04:39:04 LOG5 finish_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2011-Dec-20 04:39:04 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-20 04:39:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 04:39:04 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-20 04:39:04 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2011-Dec-20 04:39:04 LOG1 fixed_driftmap: Parameters: HA = +00:13:00.0 Start = 10:06:42.2 LST = 10:06:23.0 diff = 19.2 secs 2011-Dec-20 04:39:04 INFO2 fixed_driftmap: Waiting 17.2 seconds for RA 9:53:42 2011-Dec-20 04:39:04 INFO2 lstwait: Waiting for 17.1 secs from LST 10:06:23 to LST 10:06:40 ... 2011-Dec-20 04:39:04 LOG4 send_obs_status: To obs_status: <1> TASKTIME 17.122644411453926 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-20 04:39:04 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-20 04:39:04 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2011-Dec-20 04:39:04 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_028" 2011-Dec-20 04:39:04 LOG4 got_cormsg: From DATATAKING: set ra 148.19 2011-Dec-20 04:39:04 LOG4 got_cormsg: From DATATAKING: set dec 5.6752835163 2011-Dec-20 04:39:04 LOG4 got_cormsg: From DATATAKING: vw% 148.19 2011-Dec-20 04:39:04 LOG4 got_cormsg: From DATATAKING: vw% 5.6752835163 2011-Dec-20 04:39:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 04:39:04 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-20 04:39:04 LOG4 got_cormsg: From DATATAKING: pnt tr 148.19 5.6752835163 -CF 2011-Dec-20 04:39:04 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 04:39:04 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-20 04:39:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 04:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:39:21 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-20 04:39:21 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2011-Dec-20 04:39:21 LOG4 lstwait: Finished waiting 0.88 seconds late 2011-Dec-20 04:39:21 INFO3 lstwait: Finished waiting 2011-Dec-20 04:39:21 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-20 04:39:21 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-20 04:39:21 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-20 04:39:21 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-20 04:39:21 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-20 04:39:21 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-20 04:39:21 LOG5 begin_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2011-Dec-20 04:39:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-20 04:39:21 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-20 04:39:21 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-20 04:39:21 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-20 04:39:21 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-20 04:39:21 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_028 2011-Dec-20 04:39:21 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-20 04:39:21 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-20 04:39:21 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-20 04:39:21 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-20 04:39:21 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-20 04:39:21 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-20 04:39:21 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-20 04:39:21 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-20 04:39:21 LOG3 take_mock_data: PSET configuration: patternid=135400072 2011-Dec-20 04:39:21 LOG3 take_mock_data: PSET configuration: scanid=135400072 2011-Dec-20 04:39:21 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-20 04:39:21 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-20 04:39:21 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-20 04:39:21 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456354993.0 2011-Dec-20 04:39:21 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306354993.0 2011-Dec-20 04:39:21 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-20 04:39:21 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-20 04:39:21 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_028:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=135400072:scanid=135400072:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456354993.0:topobfreqhz=1306354993.0:filetype=1 2011-Dec-20 04:39:21 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-20 04:39:21 LOG5 begin_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2011-Dec-20 04:39:21 LOG4 from_mock: From MOCK: psetok 2011-Dec-20 04:39:21 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-20 04:39:21 LOG5 end_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2011-Dec-20 04:39:21 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-20 04:39:21 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-20 04:39:21 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-20 04:39:21 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-20 04:39:21 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2011-Dec-20 04:39:21 LOG4 from_mock: From MOCK: starok 2011-Dec-20 04:39:21 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-20 04:39:21 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2011-Dec-20 04:39:21 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-20 04:39:21 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 135400072 2011-Dec-20 04:39:22 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-20 04:39:22 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2011-Dec-20 04:39:22 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-20 04:39:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-20 04:39:22 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-20 04:39:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-20 04:39:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31163.00 2011-Dec-20 04:39:24 INFO2 got_mock_message: Mock spectrometer start file number is 01100 2011-Dec-20 04:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.354993 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-20 04:39:24 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-20 04:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.354993 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2011-Dec-20 04:39:24 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2011-Dec-20 04:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.354993 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2011-Dec-20 04:39:24 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-20 04:39:24 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-20 04:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.354993 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2011-Dec-20 04:39:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-20 04:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.354993 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2011-Dec-20 04:39:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-20 04:39:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-20 04:39:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-20 04:39:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-20 04:39:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-20 04:39:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-20 04:39:24 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-20 04:39:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 04:39:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 04:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.354993 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 04:39:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 04:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.354993 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 04:39:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 04:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.354993 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 04:39:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 04:39:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 04:39:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 04:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.354993 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 04:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:39:27 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:39:27.01 2011-Dec-20 04:39:27 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324370367.01 Tue Dec 20 04:39:27 2011 2011-Dec-20 04:39:27 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-20 04:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:39:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:39:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.112 0.910 0.956 2011-Dec-20 04:39:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 1.012 1.086 0.903 2011-Dec-20 04:39:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.861 0.900 0.927 1.105 2011-Dec-20 04:39:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.014 0.933 0.014 2011-Dec-20 04:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 04:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 04:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:40:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:40:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 1.116 0.914 0.958 2011-Dec-20 04:40:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.921 1.010 1.084 0.901 2011-Dec-20 04:40:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.860 0.897 0.926 1.104 2011-Dec-20 04:40:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.072 0.014 0.939 0.014 2011-Dec-20 04:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:41:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:41:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.113 0.907 0.953 2011-Dec-20 04:41:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 1.010 1.086 0.903 2011-Dec-20 04:41:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.859 0.896 0.925 1.102 2011-Dec-20 04:41:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.014 0.934 0.014 2011-Dec-20 04:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 04:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 04:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:42:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:42:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.114 0.910 0.956 2011-Dec-20 04:42:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 1.011 1.084 0.901 2011-Dec-20 04:42:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.859 0.899 0.925 1.102 2011-Dec-20 04:42:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.014 0.933 0.014 2011-Dec-20 04:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 04:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 04:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 04:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 04:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 04:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 04:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 04:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:43:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:43:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.110 0.910 0.955 2011-Dec-20 04:43:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 1.013 1.086 0.904 2011-Dec-20 04:43:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.858 0.897 0.927 1.104 2011-Dec-20 04:43:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.073 0.014 0.939 0.014 2011-Dec-20 04:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:44:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:44:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.111 0.911 0.958 2011-Dec-20 04:44:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.926 1.014 1.084 0.902 2011-Dec-20 04:44:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.859 0.896 0.923 1.102 2011-Dec-20 04:44:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.014 0.933 0.014 2011-Dec-20 04:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:45:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:45:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 1.111 0.910 0.956 2011-Dec-20 04:45:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.928 1.016 1.085 0.902 2011-Dec-20 04:45:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.860 0.899 0.923 1.102 2011-Dec-20 04:45:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.014 0.935 0.014 2011-Dec-20 04:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:46:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:46:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.112 0.912 0.956 2011-Dec-20 04:46:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 1.014 1.083 0.902 2011-Dec-20 04:46:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.858 0.896 0.922 1.101 2011-Dec-20 04:46:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.014 0.934 0.014 2011-Dec-20 04:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:47:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:47:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 1.113 0.909 0.956 2011-Dec-20 04:47:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 1.013 1.081 0.901 2011-Dec-20 04:47:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.858 0.896 0.919 1.101 2011-Dec-20 04:47:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.067 0.014 0.933 0.014 2011-Dec-20 04:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 04:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 04:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 04:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:48:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:48:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 1.112 0.909 0.955 2011-Dec-20 04:48:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.926 1.011 1.081 0.901 2011-Dec-20 04:48:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.858 0.895 0.922 1.101 2011-Dec-20 04:48:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.067 0.014 0.933 0.014 2011-Dec-20 04:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:49:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:49:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.112 0.910 0.955 2011-Dec-20 04:49:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.926 1.012 1.085 0.904 2011-Dec-20 04:49:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.861 0.901 0.923 1.100 2011-Dec-20 04:49:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.014 0.933 0.014 2011-Dec-20 04:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-20 04:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 04:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:50:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:50:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.111 0.909 0.955 2011-Dec-20 04:50:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.930 1.014 1.084 0.901 2011-Dec-20 04:50:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.857 0.897 0.921 1.100 2011-Dec-20 04:50:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.014 0.934 0.014 2011-Dec-20 04:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 04:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 04:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-20 04:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-20 04:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-20 04:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-20 04:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 04:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 04:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 04:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 04:51:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:51:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.111 0.911 0.955 2011-Dec-20 04:51:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.929 1.016 1.085 0.903 2011-Dec-20 04:51:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.858 0.898 0.944 1.126 2011-Dec-20 04:51:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.069 0.014 0.935 0.014 2011-Dec-20 04:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-20 04:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-20 04:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-20 04:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-20 04:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-20 04:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-20 04:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-20 04:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 04:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 04:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-20 04:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-20 04:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-20 04:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.162 (still bad) 2011-Dec-20 04:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.168 (still bad) 2011-Dec-20 04:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.165 (still bad) 2011-Dec-20 04:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.157 (still bad) 2011-Dec-20 04:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 04:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-20 04:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-20 04:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 04:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 04:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 04:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 04:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 04:52:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:52:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.081 1.115 0.913 0.958 2011-Dec-20 04:52:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.929 1.015 1.086 0.901 2011-Dec-20 04:52:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.860 0.899 0.939 1.116 2011-Dec-20 04:52:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.069 0.014 0.935 0.014 2011-Dec-20 04:52:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:52:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 04:53:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:53:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 04:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 04:53:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 04:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 04:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 04:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 04:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 04:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 04:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 04:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 04:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 04:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:53:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:53:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.081 1.114 0.909 0.955 2011-Dec-20 04:53:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.926 1.011 1.082 0.902 2011-Dec-20 04:53:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.860 0.896 0.925 1.101 2011-Dec-20 04:53:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.070 0.014 0.935 0.014 2011-Dec-20 04:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:54:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:54:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:54:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:54:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:54:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:54:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 8-15 errors 2011-Dec-20 04:54:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 16-31 errors 2011-Dec-20 04:54:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 8-15 errors 2011-Dec-20 04:54:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 8-15 errors 2011-Dec-20 04:54:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 16-31 errors 2011-Dec-20 04:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:54:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:54:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.111 0.911 0.957 2011-Dec-20 04:54:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 1.014 1.084 0.902 2011-Dec-20 04:54:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.858 0.895 0.923 1.101 2011-Dec-20 04:54:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.014 0.933 0.014 2011-Dec-20 04:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 04:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 04:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:55:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 04:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 04:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 04:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-20 04:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-20 04:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-20 04:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-20 04:55:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:55:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.090 1.130 0.908 0.954 2011-Dec-20 04:55:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 1.013 1.085 0.903 2011-Dec-20 04:55:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.857 0.897 0.923 1.102 2011-Dec-20 04:55:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.067 0.014 0.933 0.014 2011-Dec-20 04:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-20 04:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 04:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 04:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 04:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 04:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 04:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 04:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-20 04:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 04:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-20 04:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-20 04:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 04:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:56:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:56:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 1.111 0.913 0.958 2011-Dec-20 04:56:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 1.010 1.084 0.902 2011-Dec-20 04:56:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.857 0.896 0.924 1.103 2011-Dec-20 04:56:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.072 0.014 0.938 0.014 2011-Dec-20 04:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 04:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-20 04:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-20 04:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 04:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 04:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-20 04:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 04:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 04:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 04:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-20 04:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 04:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 04:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 04:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 04:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-20 04:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 04:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 04:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 04:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:58:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:58:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 1.111 0.909 0.954 2011-Dec-20 04:58:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 1.022 1.086 0.903 2011-Dec-20 04:58:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.856 0.896 0.923 1.101 2011-Dec-20 04:58:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.067 0.014 0.933 0.014 2011-Dec-20 04:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 04:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 04:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 04:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 04:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 04:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-20 04:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 04:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.163 (still bad) 2011-Dec-20 04:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.178 (still bad) 2011-Dec-20 04:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.184 (still bad) 2011-Dec-20 04:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.186 (still bad) 2011-Dec-20 04:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.180 (still bad) 2011-Dec-20 04:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.165 (still bad) 2011-Dec-20 04:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 04:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-20 04:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-20 04:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 04:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-20 04:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-20 04:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-20 04:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 04:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 04:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-20 04:59:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 04:59:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.104 1.138 0.911 0.958 2011-Dec-20 04:59:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 1.013 1.085 0.903 2011-Dec-20 04:59:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.859 0.902 0.936 1.115 2011-Dec-20 04:59:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.014 0.933 0.014 2011-Dec-20 04:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-20 04:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-20 04:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 04:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 04:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 04:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-20 04:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-20 04:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-20 04:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-20 04:59:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-20 04:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 04:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 04:59:28 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-20 04:59:28 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-20 04:59:28 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-20 04:59:28 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2011-Dec-20 04:59:28 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-20 04:59:28 LOG5 end_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2011-Dec-20 04:59:28 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-20 04:59:28 LOG5 finish_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2011-Dec-20 04:59:28 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-20 04:59:28 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-20 04:59:28 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-20 04:59:28 LOG5 end_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2011-Dec-20 04:59:28 COMMAND run_command_line: EXECUTING command 34: 'ENDIF' 2011-Dec-20 04:59:28 COMMAND run_command_line: EXECUTING command 37: 'IF LSTSLEW(AGES3193_p3_032) < 103011 THEN' 2011-Dec-20 04:59:28 LOG3 is_if_valid: Current source data: up 122.6 9.1 UP - - 49 1.4 2011-Dec-20 04:59:28 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_032) < 103011 2011-Dec-20 04:59:28 INFO5 is_if_valid: Condition parsed as: 10.470648333333333 < 10.503055555555555 2011-Dec-20 04:59:28 COMMAND run_command_line: EXECUTING command 38: 'FIXEDDRIFT az=120.37 alfaangle=78.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_032 ra=95300.00 dec=230630.00' 2011-Dec-20 04:59:28 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-20 04:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 04:59:29 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-20 04:59:29 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 120.37 78.3 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_032 95300.00 230630.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-20 04:59:29 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-20 04:59:29 LOG5 begin_task: Level: (2) ID = <10193> Status = 0 0 0 0 ok 2011-Dec-20 04:59:29 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_028' 2011-Dec-20 04:59:29 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-20 04:59:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_032} 2011-Dec-20 04:59:29 INFO3 fixed_driftmap: Sending telescope to Az = 120.37 and ZA = 9.74 2011-Dec-20 04:59:29 LOG3 track_source: Calling 'track_source AGES3193_p3_032 120.37 9.7359447318 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-20 04:59:29 START begin_task: Starting task 'sending tracking commands' 2011-Dec-20 04:59:29 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2011-Dec-20 04:59:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_032} INFO {Slewing to source 'AGES3193_p3_032' ...} 2011-Dec-20 04:59:29 INFO1 track_source: Starting to track AGES3193_p3_032 2011-Dec-20 04:59:29 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_032" 2011-Dec-20 04:59:29 LOG3 vw_send: To DATATAKING: set ra 120.37 2011-Dec-20 04:59:29 LOG3 vw_send: To DATATAKING: set dec 9.7359447318 2011-Dec-20 04:59:29 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-20 04:59:29 LOG3 vw_send: To DATATAKING: pnt tr 120.37 9.7359447318 -CF 2011-Dec-20 04:59:29 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 04:59:29 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-20 04:59:29 LOG5 finish_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2011-Dec-20 04:59:29 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-20 04:59:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 04:59:29 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-20 04:59:29 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2011-Dec-20 04:59:29 START begin_task: Starting task 'rotate ALFA to +78.3 degrees' 2011-Dec-20 04:59:29 LOG5 begin_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2011-Dec-20 04:59:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +78.3 degrees ...} 2011-Dec-20 04:59:29 INFO2 rotate_alfa: ALFA commanded to +78.3 degrees 2011-Dec-20 04:59:29 LOG3 sock_errsend: To ALFAMOTOR: POSITION 78.3 REPLY 2011-Dec-20 04:59:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-20 04:59:29 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-20 04:59:29 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2011-Dec-20 04:59:29 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_032" 2011-Dec-20 04:59:29 LOG4 got_cormsg: From DATATAKING: set ra 120.37 2011-Dec-20 04:59:29 LOG4 got_cormsg: From DATATAKING: set dec 9.7359447318 2011-Dec-20 04:59:29 LOG4 got_cormsg: From DATATAKING: vw% 120.37 2011-Dec-20 04:59:29 LOG4 got_cormsg: From DATATAKING: vw% 9.7359447318 2011-Dec-20 04:59:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 04:59:29 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-20 04:59:29 LOG4 got_cormsg: From DATATAKING: pnt tr 120.37 9.7359447318 -CF 2011-Dec-20 04:59:29 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 04:59:29 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-20 04:59:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 04:59:47 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-20 04:59:47 INFO3 alfa_motor: ALFA rotator in-position +78.30 degrees 2011-Dec-20 04:59:47 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-20 04:59:47 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2011-Dec-20 04:59:47 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-20 04:59:47 STOP finish_task: Finishing task 'rotate ALFA to +78.3 degrees' 2011-Dec-20 04:59:47 LOG5 finish_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2011-Dec-20 04:59:47 INFO2 finish_task: DONE finished configuration: rotating ALFA to +78.3 degrees 2011-Dec-20 04:59:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 04:59:47 STOP end_task: Finishing task 'rotate ALFA to +78.3 degrees' with status 'OK' 2011-Dec-20 04:59:47 LOG5 end_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2011-Dec-20 04:59:47 START begin_task: Starting task 'waiting on telescope' 2011-Dec-20 04:59:47 LOG5 begin_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2011-Dec-20 04:59:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-20 04:59:47 LOG3 waittrk: Start waittrk 5 2011-Dec-20 04:59:47 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-20 04:59:47 LOG5 begin_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2011-Dec-20 04:59:52 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-20 04:59:52 LOG5 end_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2011-Dec-20 04:59:52 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-20 04:59:52 LOG5 begin_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2011-Dec-20 05:01:16 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-20 05:01:16 LOG5 end_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2011-Dec-20 05:01:16 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-20 05:01:16 INFO2 waittrk: Now tracking AGES3193_p3_032 2011-Dec-20 05:01:16 LOG4 waittrk: Current telescope position: Az = 120.13 ZA = 9.74 2011-Dec-20 05:01:16 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-20 05:01:16 LOG5 finish_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2011-Dec-20 05:01:16 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-20 05:01:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 05:01:16 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-20 05:01:16 LOG5 end_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2011-Dec-20 05:01:16 START begin_task: Starting task 'selecting calibration type' 2011-Dec-20 05:01:16 LOG5 begin_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2011-Dec-20 05:01:16 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-20 05:01:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-20 05:01:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 05:01:16 START begin_task: Starting task 'waiting on setcal' 2011-Dec-20 05:01:16 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2011-Dec-20 05:01:17 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-20 05:01:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 05:01:17 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:01:17 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-20 05:01:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-20 05:01:17 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2011-Dec-20 05:01:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-20 05:01:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-20 05:01:17 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-20 05:01:17 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-20 05:01:17 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2011-Dec-20 05:01:17 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:01:18 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-20 05:01:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-20 05:01:18 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2011-Dec-20 05:01:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-20 05:01:18 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-20 05:01:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-20 05:01:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-20 05:01:18 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-20 05:01:18 LOG5 begin_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2011-Dec-20 05:01:18 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-20 05:01:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-20 05:01:18 LOG5 end_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2011-Dec-20 05:01:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-20 05:01:18 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-20 05:01:18 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-20 05:01:18 LOG5 end_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2011-Dec-20 05:01:18 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Dec-20 05:01:18 INFO2 astwait: Waiting for 30 seconds from 09:01:18 to 09:01:48 UTC ... 2011-Dec-20 05:01:18 LOG4 send_obs_status: To obs_status: <1> TASKTIME 30 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-20 05:01:18 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Dec-20 05:01:18 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2011-Dec-20 05:01:48 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Dec-20 05:01:48 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2011-Dec-20 05:01:48 INFO3 astwait: Finished waiting 2011-Dec-20 05:01:48 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-20 05:01:48 LOG5 dopset_later: Calling 'dopset_later 60.879638369948978' 2011-Dec-20 05:01:48 INFO3 dopset_later: Setting Doppler correction for 05:02:48 (60.9 seconds from now) 2011-Dec-20 05:01:48 LOG5 antvel: Calling 'antvel 120.370000 9.735945 F Heliocentric 60.879638369948978' 2011-Dec-20 05:01:48 LOG2 antvel: Transforming current Az = 120.37 ZA = 9.74 to apparent RA = 09:53:42.0 Dec = +23:02:51.7 2011-Dec-20 05:01:48 LOG2 antvel: Parameters to Doppler: Heliocentric 32568 2011 354 0.0 2011-Dec-20 05:01:48 INFO5 antvel: Computed antenna velocity: -24.18366 km/s 2011-Dec-20 05:01:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-24.183656028000001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-20 05:01:48 INFO4 dopset_gen: New sky frequencies: 1381.354860 1381.354860 1381.354860 1381.354860 1381.354860 1381.354860 1381.354860 1381.354860 1381.354860 2011-Dec-20 05:01:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.354860 sky0=1381.354860 sky1=1381.354860 sky2=1381.354860 sky3=1381.354860 sky4=1381.354860 sky5=1381.354860 sky6=1381.354860 sky7=1381.354860 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-20 05:01:48 LOG2 dopset_gen: Result from 'sky2syn': 1631.354860 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-20 05:01:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631354860.0} 2011-Dec-20 05:01:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 05:01:48 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-20 05:01:48 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-20 05:01:48 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.7 Dec = +23:06:15.4 2011-Dec-20 05:01:48 LOG3 track_source: Calling 'track_source AGES3193_p3_032 095203.7 230615.4 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-20 05:01:48 START begin_task: Starting task 'sending tracking commands' 2011-Dec-20 05:01:48 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2011-Dec-20 05:01:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_032} INFO {Slewing to source 'AGES3193_p3_032' ...} 2011-Dec-20 05:01:48 INFO1 track_source: Starting to track AGES3193_p3_032 2011-Dec-20 05:01:48 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_032" 2011-Dec-20 05:01:48 LOG3 vw_send: To DATATAKING: set ra 095203.7 2011-Dec-20 05:01:48 LOG3 vw_send: To DATATAKING: set dec 230615.4 2011-Dec-20 05:01:48 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-20 05:01:48 LOG3 vw_send: To DATATAKING: pnt tr 095203.7 230615.4 -CJ 2011-Dec-20 05:01:48 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 05:01:48 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-20 05:01:48 LOG5 finish_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2011-Dec-20 05:01:48 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-20 05:01:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 05:01:48 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-20 05:01:48 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2011-Dec-20 05:01:48 START begin_task: Starting task 'waiting on telescope' 2011-Dec-20 05:01:48 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2011-Dec-20 05:01:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-20 05:01:48 LOG3 waittrk: Start waittrk 5 2011-Dec-20 05:01:48 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-20 05:01:48 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2011-Dec-20 05:01:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631354860.0} 2011-Dec-20 05:01:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 05:01:48 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:01:48 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_032" 2011-Dec-20 05:01:48 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:01:48 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:01:48 LOG4 got_cormsg: From DATATAKING: set ra 095203.7 2011-Dec-20 05:01:48 LOG4 got_cormsg: From DATATAKING: set dec 230615.4 2011-Dec-20 05:01:48 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-20 05:01:48 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.7 230615.4 -CJ 2011-Dec-20 05:01:48 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 05:01:48 LOG4 got_cormsg: From DATATAKING: 095203.7 2011-Dec-20 05:01:48 LOG4 got_cormsg: From DATATAKING: vw% 230615.4 2011-Dec-20 05:01:48 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2011-Dec-20 05:01:53 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-20 05:01:53 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2011-Dec-20 05:01:53 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-20 05:01:53 LOG5 begin_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2011-Dec-20 05:01:55 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-20 05:01:55 LOG5 end_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2011-Dec-20 05:01:55 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-20 05:01:55 INFO2 waittrk: Now tracking AGES3193_p3_032 2011-Dec-20 05:01:55 LOG4 waittrk: Current telescope position: Az = 120.07 ZA = 9.76 2011-Dec-20 05:01:55 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-20 05:01:55 LOG5 finish_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2011-Dec-20 05:01:55 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-20 05:01:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 05:01:55 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-20 05:01:55 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2011-Dec-20 05:01:55 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-20 05:01:55 LOG5 begin_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2011-Dec-20 05:01:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-20 05:01:55 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-20 05:01:55 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-20 05:01:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-20 05:01:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 05:01:55 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-20 05:01:55 LOG5 begin_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2011-Dec-20 05:01:55 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-20 05:01:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 05:01:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:01:58 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-20 05:01:58 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-20 05:01:58 LOG5 end_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2011-Dec-20 05:01:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-20 05:01:58 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-20 05:01:58 LOG5 begin_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2011-Dec-20 05:01:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-20 05:01:58 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-20 05:01:58 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-20 05:01:58 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-20 05:01:58 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-20 05:01:58 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-20 05:01:58 LOG5 begin_task: Level: (5) ID = <10212> Status = 0 0 0 0 ok 2011-Dec-20 05:01:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-20 05:01:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:01:59 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 8 6 dB 2011-Dec-20 05:01:59 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 3 3 dB 2011-Dec-20 05:01:59 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 3 dB 2011-Dec-20 05:01:59 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2011-Dec-20 05:01:59 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-20 05:01:59 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-20 05:01:59 LOG5 end_task: Level: (5) ID = <10212> Status = 0 0 0 0 ok 2011-Dec-20 05:01:59 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.107 1.120 ALFA beam 1: 0.936 0.969 2011-Dec-20 05:01:59 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.970 1.036 ALFA beam 3: 1.123 0.910 2011-Dec-20 05:01:59 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.868 0.899 ALFA beam 5: 0.934 1.116 2011-Dec-20 05:01:59 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.082 0.014 ALFA beam 7: 0.946 0.014 2011-Dec-20 05:01:59 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-20 05:01:59 LOG5 finish_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2011-Dec-20 05:01:59 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-20 05:01:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 05:01:59 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-20 05:01:59 LOG5 end_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2011-Dec-20 05:01:59 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-20 05:01:59 LOG5 begin_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2011-Dec-20 05:01:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-20 05:01:59 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-20 05:01:59 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-20 05:01:59 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-20 05:01:59 LOG5 begin_task: Level: (5) ID = <10214> Status = 0 0 0 0 ok 2011-Dec-20 05:02:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:02:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.107 1.120 0.936 0.969 2011-Dec-20 05:02:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.970 1.036 1.123 0.910 2011-Dec-20 05:02:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.868 0.899 0.934 1.116 2011-Dec-20 05:02:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 0.014 0.946 0.014 2011-Dec-20 05:02:05 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.6 27.8 B 31.1 31.2 mn:A -0.1 -0.1 B -0.4 -0.3 gn: 11 11 2011-Dec-20 05:02:05 INFO3 from_mock: From MOCK: b0s1g0 rms:A 37.6 36.0 B 37.5 39.7 mn:A 0.0 -0.5 B -0.6 0.1 gn: 12 11 2011-Dec-20 05:02:05 INFO3 from_mock: From MOCK: b1s0g0 rms:A 31.2 29.2 B 30.2 26.5 mn:A 0.7 0.7 B 0.1 0.0 gn: 7 10 2011-Dec-20 05:02:05 INFO3 from_mock: From MOCK: b1s1g0 rms:A 40.6 37.6 B 34.4 34.5 mn:A -0.2 -0.3 B 0.6 0.3 gn: 8 9 2011-Dec-20 05:02:05 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.7 28.8 B 29.0 30.4 mn:A 0.0 -0.3 B 0.3 0.0 gn: 10 11 2011-Dec-20 05:02:05 INFO3 from_mock: From MOCK: b2s1g0 rms:A 41.8 42.2 B 35.5 33.0 mn:A 0.3 -0.3 B 0.0 0.2 gn: 11 11 2011-Dec-20 05:02:05 INFO3 from_mock: From MOCK: b3s0g0 rms:A 30.0 29.8 B 31.6 28.2 mn:A 0.4 -0.2 B 0.1 -0.3 gn: 12 12 2011-Dec-20 05:02:05 INFO3 from_mock: From MOCK: b3s1g0 rms:A 43.7 42.9 B 34.0 35.4 mn:A -0.3 0.3 B 0.1 0.1 gn: 12 12 2011-Dec-20 05:02:05 INFO3 from_mock: From MOCK: b4s0g0 rms:A 31.0 30.1 B 31.9 32.1 mn:A -0.3 -0.3 B -0.4 -0.0 gn: 13 12 2011-Dec-20 05:02:05 INFO3 from_mock: From MOCK: b4s1g0 rms:A 44.9 41.0 B 34.9 33.6 mn:A -0.1 -0.0 B -0.4 0.2 gn: 16 13 2011-Dec-20 05:02:05 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.0 27.9 B 30.7 30.7 mn:A 0.5 0.4 B 0.1 0.4 gn: 12 11 2011-Dec-20 05:02:05 INFO3 from_mock: From MOCK: b5s1g0 rms:A 38.2 38.1 B 39.9 39.5 mn:A -0.4 0.2 B 0.0 0.2 gn: 12 11 2011-Dec-20 05:02:05 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.4 29.7 B 15.4 15.9 mn:A -0.5 0.1 B 0.4 -0.5 gn: 13 31 2011-Dec-20 05:02:05 INFO3 from_mock: From MOCK: b6s1g0 rms:A 40.5 36.9 B 12.4 12.0 mn:A 0.5 0.5 B 0.1 0.1 gn: 14 31 2011-Dec-20 05:02:05 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-20 05:02:05 LOG5 end_task: Level: (5) ID = <10214> Status = 0 0 0 0 ok 2011-Dec-20 05:02:05 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-20 05:02:05 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-20 05:02:05 LOG5 finish_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2011-Dec-20 05:02:05 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-20 05:02:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 05:02:05 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-20 05:02:05 LOG5 end_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2011-Dec-20 05:02:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-20 05:02:05 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-20 05:02:05 LOG5 finish_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2011-Dec-20 05:02:05 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-20 05:02:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 05:02:05 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-20 05:02:05 LOG5 end_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2011-Dec-20 05:02:05 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ep 2011-Dec-20 05:02:05 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ep 2011-Dec-20 05:02:05 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ep 2011-Dec-20 05:02:05 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ep 2011-Dec-20 05:02:05 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-20 05:02:05 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-20 05:02:05 LOG5 begin_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2011-Dec-20 05:02:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-20 05:02:05 START begin_task: Starting task 'selecting calibration type' 2011-Dec-20 05:02:05 LOG5 begin_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2011-Dec-20 05:02:05 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-20 05:02:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-20 05:02:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 05:02:05 START begin_task: Starting task 'waiting on setcal' 2011-Dec-20 05:02:05 LOG5 begin_task: Level: (5) ID = <10217> Status = 0 0 0 0 ok 2011-Dec-20 05:02:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ep' 2011-Dec-20 05:02:05 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-20 05:02:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 05:02:05 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:02:06 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-20 05:02:06 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-20 05:02:06 LOG5 end_task: Level: (5) ID = <10217> Status = 0 0 0 0 ok 2011-Dec-20 05:02:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-20 05:02:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-20 05:02:06 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-20 05:02:06 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-20 05:02:06 LOG5 begin_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2011-Dec-20 05:02:06 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:02:06 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-20 05:02:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-20 05:02:06 LOG5 end_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2011-Dec-20 05:02:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-20 05:02:06 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-20 05:02:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-20 05:02:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-20 05:02:06 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-20 05:02:06 LOG5 begin_task: Level: (5) ID = <10219> Status = 0 0 0 0 ok 2011-Dec-20 05:02:06 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-20 05:02:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-20 05:02:06 LOG5 end_task: Level: (5) ID = <10219> Status = 0 0 0 0 ok 2011-Dec-20 05:02:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-20 05:02:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-20 05:02:06 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-20 05:02:06 LOG5 end_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2011-Dec-20 05:02:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-20 05:02:06 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-20 05:02:06 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-20 05:02:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-20 05:02:06 LOG5 begin_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2011-Dec-20 05:02:06 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-20 05:02:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-20 05:02:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-20 05:02:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-20 05:02:06 LOG5 end_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2011-Dec-20 05:02:06 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-20 05:02:06 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-20 05:02:06 LOG5 begin_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2011-Dec-20 05:02:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-20 05:02:06 LOG5 log_alfabeam: Parameters: 9.8676944444444441 23.104277777777778 10.491602 2011.9697735569243 78.299919 2011-Dec-20 05:02:06 LOG4 log_alfabeam: ALFABEAM 0 9.867694444444446 23.104277777777774 2011-Dec-20 05:02:06 LOG4 log_alfabeam: ALFABEAM 1 9.870071582690843 23.011633524746784 2011-Dec-20 05:02:06 LOG4 log_alfabeam: ALFABEAM 2 9.875046443547779 23.073313912970711 2011-Dec-20 05:02:06 LOG4 log_alfabeam: ALFABEAM 3 9.872723043064152 23.166053464225232 2011-Dec-20 05:02:06 LOG4 log_alfabeam: ALFABEAM 4 9.865376635483516 23.197574541273696 2011-Dec-20 05:02:06 LOG4 log_alfabeam: ALFABEAM 5 9.860328475451540 23.134799923764028 2011-Dec-20 05:02:06 LOG4 log_alfabeam: ALFABEAM 6 9.862700434638187 23.041597484754998 2011-Dec-20 05:02:06 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-20 05:02:06 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-20 05:02:06 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-20 05:02:06 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_032 2011-Dec-20 05:02:06 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-20 05:02:06 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-20 05:02:06 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-20 05:02:06 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-20 05:02:06 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-20 05:02:06 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-20 05:02:06 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-20 05:02:06 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-20 05:02:06 LOG3 take_mock_data: PSET configuration: patternid=135400072 2011-Dec-20 05:02:06 LOG3 take_mock_data: PSET configuration: scanid=135400073 2011-Dec-20 05:02:06 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-20 05:02:06 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-20 05:02:06 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-20 05:02:06 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456354860.0 2011-Dec-20 05:02:06 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306354860.0 2011-Dec-20 05:02:06 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-20 05:02:06 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-20 05:02:06 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_032:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=135400072:scanid=135400073:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456354860.0:topobfreqhz=1306354860.0:filetype=1 2011-Dec-20 05:02:06 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-20 05:02:06 LOG5 begin_task: Level: (5) ID = <10222> Status = 0 0 0 0 ok 2011-Dec-20 05:02:06 LOG4 from_mock: From MOCK: psetok 2011-Dec-20 05:02:06 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-20 05:02:06 LOG5 end_task: Level: (5) ID = <10222> Status = 0 0 0 0 ok 2011-Dec-20 05:02:06 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-20 05:02:06 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-20 05:02:06 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-20 05:02:06 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-20 05:02:06 LOG5 begin_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2011-Dec-20 05:02:06 NOTE WAPPDATA-new_file: New FITS file: wapp.20111220.a2048.0005.fits 2011-Dec-20 05:02:06 LOG4 from_mock: From MOCK: starok 2011-Dec-20 05:02:06 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-20 05:02:06 LOG5 end_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2011-Dec-20 05:02:06 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-20 05:02:06 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135400073 2011-Dec-20 05:02:07 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-20 05:02:07 LOG5 begin_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2011-Dec-20 05:02:07 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111220.a2048.0005.fits} 2011-Dec-20 05:02:07 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-20 05:02:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-20 05:02:07 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-20 05:02:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-20 05:02:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32528.00 2011-Dec-20 05:02:08 INFO2 got_mock_message: Mock spectrometer start file number is 01200 2011-Dec-20 05:02:08 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-20 05:02:08 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-20 05:02:08 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-20 05:02:08 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-20 05:02:08 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-20 05:02:08 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-20 05:02:08 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-20 05:02:08 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-20 05:02:08 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-20 05:02:08 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-20 05:02:08 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-20 05:02:08 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-20 05:02:08 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 05:02:08 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 05:02:08 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 05:02:08 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 05:02:08 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 05:02:08 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 05:02:08 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 05:02:11 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:02:11.01 2011-Dec-20 05:02:11 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324371731.01 Tue Dec 20 05:02:11 2011 2011-Dec-20 05:02:11 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-20 05:02:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.354860 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-20 05:02:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.354860 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2011-Dec-20 05:02:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.354860 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2011-Dec-20 05:02:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.354860 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2011-Dec-20 05:02:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.354860 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2011-Dec-20 05:02:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.354860 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:02:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.354860 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:02:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.354860 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:02:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.354860 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.546 (still bad) 2011-Dec-20 05:02:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-20 05:02:16 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-20 05:02:17 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-20 05:02:17 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-20 05:02:17 LOG5 end_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2011-Dec-20 05:02:17 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-20 05:02:17 LOG5 end_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2011-Dec-20 05:02:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-20 05:02:17 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-20 05:02:17 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-20 05:02:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-20 05:02:17 LOG5 begin_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2011-Dec-20 05:02:17 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-20 05:02:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-20 05:02:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-20 05:02:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-20 05:02:17 LOG5 end_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2011-Dec-20 05:02:17 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-20 05:02:17 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-20 05:02:17 LOG5 begin_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2011-Dec-20 05:02:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-20 05:02:17 LOG5 log_alfabeam: Parameters: 9.8676944444444441 23.104277777777778 10.494388 2011.9697738738053 78.299919 2011-Dec-20 05:02:17 LOG4 log_alfabeam: ALFABEAM 0 9.867694444444446 23.104277777777781 2011-Dec-20 05:02:17 LOG4 log_alfabeam: ALFABEAM 1 9.870085165943406 23.011699481849625 2011-Dec-20 05:02:17 LOG4 log_alfabeam: ALFABEAM 2 9.875051033113444 23.073521692713054 2011-Dec-20 05:02:17 LOG4 log_alfabeam: ALFABEAM 3 9.872713838116628 23.166196512264381 2011-Dec-20 05:02:17 LOG4 log_alfabeam: ALFABEAM 4 9.865362715275715 23.197507896747769 2011-Dec-20 05:02:17 LOG4 log_alfabeam: ALFABEAM 5 9.860323998109944 23.134593051840337 2011-Dec-20 05:02:17 LOG4 log_alfabeam: ALFABEAM 6 9.862709663012025 23.041458503102589 2011-Dec-20 05:02:17 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-20 05:02:17 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-20 05:02:17 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-20 05:02:17 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_032 2011-Dec-20 05:02:17 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-20 05:02:17 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-20 05:02:17 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-20 05:02:17 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-20 05:02:17 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-20 05:02:17 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-20 05:02:17 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-20 05:02:17 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-20 05:02:17 LOG3 take_mock_data: PSET configuration: patternid=135400072 2011-Dec-20 05:02:17 LOG3 take_mock_data: PSET configuration: scanid=135400074 2011-Dec-20 05:02:17 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-20 05:02:17 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-20 05:02:17 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-20 05:02:17 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456354860.0 2011-Dec-20 05:02:17 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306354860.0 2011-Dec-20 05:02:17 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-20 05:02:17 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-20 05:02:17 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_032:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=135400072:scanid=135400074:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456354860.0:topobfreqhz=1306354860.0:filetype=1 2011-Dec-20 05:02:17 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-20 05:02:17 LOG5 begin_task: Level: (5) ID = <10227> Status = 0 0 0 0 ok 2011-Dec-20 05:02:17 LOG4 from_mock: From MOCK: psetok 2011-Dec-20 05:02:17 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-20 05:02:17 LOG5 end_task: Level: (5) ID = <10227> Status = 0 0 0 0 ok 2011-Dec-20 05:02:17 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-20 05:02:17 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-20 05:02:17 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-20 05:02:17 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-20 05:02:17 LOG5 begin_task: Level: (5) ID = <10228> Status = 0 0 0 0 ok 2011-Dec-20 05:02:17 LOG4 from_mock: From MOCK: starok 2011-Dec-20 05:02:17 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-20 05:02:17 LOG5 end_task: Level: (5) ID = <10228> Status = 0 0 0 0 ok 2011-Dec-20 05:02:17 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-20 05:02:17 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135400074 2011-Dec-20 05:02:17 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-20 05:02:17 LOG5 begin_task: Level: (5) ID = <10229> Status = 0 0 0 0 ok 2011-Dec-20 05:02:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-20 05:02:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-20 05:02:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32538.00 2011-Dec-20 05:02:18 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-20 05:02:18 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-20 05:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.551 (still bad) 2011-Dec-20 05:02:20 INFO2 got_mock_message: Mock spectrometer start file number is 01300 2011-Dec-20 05:02:20 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-20 05:02:20 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-20 05:02:20 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-20 05:02:20 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-20 05:02:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-20 05:02:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-20 05:02:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-20 05:02:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-20 05:02:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-20 05:02:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-20 05:02:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-20 05:02:20 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-20 05:02:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 05:02:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 05:02:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 05:02:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 05:02:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 05:02:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 05:02:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 05:02:23 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:02:23.02 2011-Dec-20 05:02:23 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324371743.02 Tue Dec 20 05:02:23 2011 2011-Dec-20 05:02:23 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-20 05:02:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.354860 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-20 05:02:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.354860 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2011-Dec-20 05:02:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.354860 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2011-Dec-20 05:02:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.354860 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2011-Dec-20 05:02:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.354860 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2011-Dec-20 05:02:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.354860 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:02:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.354860 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:02:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.354860 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:02:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.354860 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:02:23 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-20 05:02:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-20 05:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:02:28 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-20 05:02:29 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-20 05:02:29 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-20 05:02:29 LOG5 end_task: Level: (5) ID = <10229> Status = 0 0 0 0 ok 2011-Dec-20 05:02:29 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-20 05:02:29 LOG5 end_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2011-Dec-20 05:02:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-20 05:02:29 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-20 05:02:29 LOG5 finish_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2011-Dec-20 05:02:29 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-20 05:02:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 05:02:29 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-20 05:02:29 LOG5 end_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2011-Dec-20 05:02:29 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-20 05:02:29 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 120.37 and ZA = 9.74 2011-Dec-20 05:02:29 LOG3 track_source: Calling 'track_source AGES3193_p3_032 120.37 9.7359447318 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-20 05:02:29 START begin_task: Starting task 'sending tracking commands' 2011-Dec-20 05:02:29 LOG5 begin_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2011-Dec-20 05:02:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_032} INFO {Slewing to source 'AGES3193_p3_032' ...} 2011-Dec-20 05:02:29 INFO1 track_source: Starting to track AGES3193_p3_032 2011-Dec-20 05:02:29 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_032" 2011-Dec-20 05:02:29 LOG3 vw_send: To DATATAKING: set ra 120.37 2011-Dec-20 05:02:29 LOG3 vw_send: To DATATAKING: set dec 9.7359447318 2011-Dec-20 05:02:29 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-20 05:02:29 LOG3 vw_send: To DATATAKING: pnt tr 120.37 9.7359447318 -CF 2011-Dec-20 05:02:29 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 05:02:29 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-20 05:02:29 LOG5 finish_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2011-Dec-20 05:02:29 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-20 05:02:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 05:02:29 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-20 05:02:29 LOG5 end_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2011-Dec-20 05:02:29 LOG1 fixed_driftmap: Parameters: HA = +00:36:29.6 Start = 10:30:11.8 LST = 10:29:51.8 diff = 19.9 secs 2011-Dec-20 05:02:29 INFO2 fixed_driftmap: Waiting 17.9 seconds for RA 9:53:42 2011-Dec-20 05:02:29 INFO2 lstwait: Waiting for 17.9 secs from LST 10:29:52 to LST 10:30:10 ... 2011-Dec-20 05:02:29 LOG4 send_obs_status: To obs_status: <1> TASKTIME 17.885351374744729 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-20 05:02:29 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-20 05:02:29 LOG5 begin_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2011-Dec-20 05:02:29 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_032" 2011-Dec-20 05:02:29 LOG4 got_cormsg: From DATATAKING: set ra 120.37 2011-Dec-20 05:02:29 LOG4 got_cormsg: From DATATAKING: set dec 9.7359447318 2011-Dec-20 05:02:29 LOG4 got_cormsg: From DATATAKING: vw% 120.37 2011-Dec-20 05:02:29 LOG4 got_cormsg: From DATATAKING: vw% 9.7359447318 2011-Dec-20 05:02:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:02:29 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-20 05:02:29 LOG4 got_cormsg: From DATATAKING: pnt tr 120.37 9.7359447318 -CF 2011-Dec-20 05:02:29 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 05:02:29 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2011-Dec-20 05:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:02:47 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-20 05:02:47 LOG5 end_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2011-Dec-20 05:02:47 LOG4 lstwait: Finished waiting 1.12 seconds late 2011-Dec-20 05:02:47 INFO3 lstwait: Finished waiting 2011-Dec-20 05:02:47 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-20 05:02:47 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-20 05:02:47 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-20 05:02:47 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-20 05:02:47 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-20 05:02:47 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-20 05:02:47 LOG5 begin_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2011-Dec-20 05:02:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-20 05:02:47 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-20 05:02:47 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-20 05:02:47 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-20 05:02:47 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-20 05:02:47 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_032 2011-Dec-20 05:02:47 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-20 05:02:47 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-20 05:02:47 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-20 05:02:47 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-20 05:02:47 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-20 05:02:47 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-20 05:02:47 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-20 05:02:47 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-20 05:02:47 LOG3 take_mock_data: PSET configuration: patternid=135400075 2011-Dec-20 05:02:47 LOG3 take_mock_data: PSET configuration: scanid=135400075 2011-Dec-20 05:02:47 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-20 05:02:47 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-20 05:02:47 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-20 05:02:47 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456354860.0 2011-Dec-20 05:02:47 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306354860.0 2011-Dec-20 05:02:47 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-20 05:02:47 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-20 05:02:47 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_032:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=135400075:scanid=135400075:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456354860.0:topobfreqhz=1306354860.0:filetype=1 2011-Dec-20 05:02:47 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-20 05:02:47 LOG5 begin_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2011-Dec-20 05:02:47 LOG4 from_mock: From MOCK: psetok 2011-Dec-20 05:02:47 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-20 05:02:47 LOG5 end_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2011-Dec-20 05:02:47 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-20 05:02:47 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-20 05:02:47 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-20 05:02:47 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-20 05:02:47 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2011-Dec-20 05:02:47 LOG4 from_mock: From MOCK: starok 2011-Dec-20 05:02:47 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-20 05:02:47 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2011-Dec-20 05:02:47 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-20 05:02:47 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 135400075 2011-Dec-20 05:02:48 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-20 05:02:48 LOG5 begin_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2011-Dec-20 05:02:48 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-20 05:02:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-20 05:02:48 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-20 05:02:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-20 05:02:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32569.00 2011-Dec-20 05:02:49 INFO2 got_mock_message: Mock spectrometer start file number is 01400 2011-Dec-20 05:02:49 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-20 05:02:49 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1199.9 s 2011-Dec-20 05:02:49 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-20 05:02:49 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-20 05:02:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-20 05:02:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-20 05:02:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-20 05:02:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-20 05:02:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-20 05:02:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-20 05:02:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-20 05:02:49 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-20 05:02:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 05:02:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 05:02:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 05:02:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 05:02:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 05:02:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 05:02:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 05:02:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.354860 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-20 05:02:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.354860 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2011-Dec-20 05:02:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.354860 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2011-Dec-20 05:02:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.354860 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2011-Dec-20 05:02:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.354860 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2011-Dec-20 05:02:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.354860 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:02:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.354860 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:02:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.354860 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:02:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.354860 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:02:52 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:02:52.02 2011-Dec-20 05:02:52 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324371772.02 Tue Dec 20 05:02:52 2011 2011-Dec-20 05:02:52 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-20 05:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:03:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:03:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.107 1.119 0.937 0.969 2011-Dec-20 05:03:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.975 1.041 1.117 0.906 2011-Dec-20 05:03:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 0.899 0.935 1.116 2011-Dec-20 05:03:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.014 0.942 0.014 2011-Dec-20 05:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-20 05:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-20 05:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-20 05:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-20 05:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-20 05:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-20 05:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-20 05:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-20 05:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-20 05:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-20 05:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 05:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 05:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.165 (still bad) 2011-Dec-20 05:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.170 (still bad) 2011-Dec-20 05:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.177 (still bad) 2011-Dec-20 05:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.175 (still bad) 2011-Dec-20 05:04:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:04:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.155 1.174 0.937 0.970 2011-Dec-20 05:04:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.974 1.039 1.117 0.906 2011-Dec-20 05:04:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.868 0.897 0.940 1.127 2011-Dec-20 05:04:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 0.014 0.943 0.014 2011-Dec-20 05:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.163 (still bad) 2011-Dec-20 05:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 05:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-20 05:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-20 05:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-20 05:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-20 05:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-20 05:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-20 05:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-20 05:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-20 05:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-20 05:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-20 05:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-20 05:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:05:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:05:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 1.119 0.936 0.968 2011-Dec-20 05:05:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.971 1.035 1.116 0.904 2011-Dec-20 05:05:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 0.897 0.936 1.116 2011-Dec-20 05:05:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.014 0.944 0.014 2011-Dec-20 05:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 05:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:06:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:06:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 1.117 0.935 0.967 2011-Dec-20 05:06:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.987 1.050 1.116 0.905 2011-Dec-20 05:06:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.865 0.895 0.932 1.115 2011-Dec-20 05:06:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.014 0.942 0.014 2011-Dec-20 05:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-20 05:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-20 05:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-20 05:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.154 (still bad) 2011-Dec-20 05:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.157 (still bad) 2011-Dec-20 05:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.159 (still bad) 2011-Dec-20 05:06:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.156 (still bad) 2011-Dec-20 05:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-20 05:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 05:06:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-20 05:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-20 05:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-20 05:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:07:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:07:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 1.120 0.934 0.966 2011-Dec-20 05:07:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.972 1.036 1.115 0.905 2011-Dec-20 05:07:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 0.894 0.937 1.119 2011-Dec-20 05:07:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.014 0.942 0.014 2011-Dec-20 05:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:08:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:08:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:08:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.106 1.119 0.934 0.966 2011-Dec-20 05:08:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.975 1.038 1.114 0.905 2011-Dec-20 05:08:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 0.895 0.933 1.116 2011-Dec-20 05:08:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 0.014 0.941 0.014 2011-Dec-20 05:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:09:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:09:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.105 1.120 0.935 0.966 2011-Dec-20 05:09:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.973 1.036 1.117 0.905 2011-Dec-20 05:09:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.865 0.896 0.933 1.115 2011-Dec-20 05:09:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.014 0.943 0.014 2011-Dec-20 05:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:09:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:10:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:10:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.104 1.121 0.932 0.968 2011-Dec-20 05:10:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.979 1.040 1.115 0.904 2011-Dec-20 05:10:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.865 0.896 0.931 1.115 2011-Dec-20 05:10:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.014 0.942 0.014 2011-Dec-20 05:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:10:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:10:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:10:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:10:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:10:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:10:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:11:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:11:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:11:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:11:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.120 0.934 0.968 2011-Dec-20 05:11:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.973 1.036 1.114 0.905 2011-Dec-20 05:11:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 0.897 0.934 1.115 2011-Dec-20 05:11:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.087 0.014 0.949 0.014 2011-Dec-20 05:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:12:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:12:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.104 1.119 0.936 0.968 2011-Dec-20 05:12:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.975 1.035 1.118 0.904 2011-Dec-20 05:12:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.865 0.897 0.936 1.115 2011-Dec-20 05:12:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.084 0.014 0.948 0.014 2011-Dec-20 05:12:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:13:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:13:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.104 1.119 0.936 0.968 2011-Dec-20 05:13:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.973 1.034 1.114 0.905 2011-Dec-20 05:13:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 0.897 0.933 1.114 2011-Dec-20 05:13:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.084 0.014 0.946 0.014 2011-Dec-20 05:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:13:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:13:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:13:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:13:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:14:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:14:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 1.119 0.935 0.968 2011-Dec-20 05:14:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.971 1.037 1.117 0.907 2011-Dec-20 05:14:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.865 0.896 0.935 1.115 2011-Dec-20 05:14:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 0.014 0.944 0.014 2011-Dec-20 05:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-20 05:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-20 05:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-20 05:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-20 05:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:15:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:15:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:15:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:15:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:15:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:15:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.107 1.124 0.937 0.970 2011-Dec-20 05:15:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.971 1.038 1.124 0.913 2011-Dec-20 05:15:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.867 0.899 0.933 1.116 2011-Dec-20 05:15:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.014 0.943 0.014 2011-Dec-20 05:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:15:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-20 05:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-20 05:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-20 05:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-20 05:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-20 05:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-20 05:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-20 05:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-20 05:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:16:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:16:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.107 1.123 0.934 0.969 2011-Dec-20 05:16:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.973 1.039 1.123 0.909 2011-Dec-20 05:16:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 0.899 0.937 1.118 2011-Dec-20 05:16:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 0.014 0.943 0.014 2011-Dec-20 05:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-20 05:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-20 05:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-20 05:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-20 05:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:16:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-20 05:16:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:16:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:16:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:16:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:16:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:16:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:17:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC = 8-15 errors PFB = 4-7 errors 2011-Dec-20 05:17:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 8-15 errors 2011-Dec-20 05:17:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors PFB = 32-63 errors 2011-Dec-20 05:17:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors PFB = 8-15 errors 2011-Dec-20 05:17:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): ADC = 512-1023 errors PFB = 8-15 errors 2011-Dec-20 05:17:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors PFB = 16-31 errors 2011-Dec-20 05:17:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 16-31 errors 2011-Dec-20 05:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:17:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:17:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.104 1.121 0.934 0.969 2011-Dec-20 05:17:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.977 1.038 1.116 0.905 2011-Dec-20 05:17:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 0.897 0.936 1.116 2011-Dec-20 05:17:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 0.014 0.944 0.014 2011-Dec-20 05:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:18:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:18:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.105 1.120 0.949 0.983 2011-Dec-20 05:18:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.976 1.040 1.118 0.906 2011-Dec-20 05:18:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 0.896 0.937 1.115 2011-Dec-20 05:18:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.014 0.943 0.014 2011-Dec-20 05:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-20 05:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-20 05:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-20 05:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-20 05:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-20 05:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-20 05:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-20 05:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-20 05:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-20 05:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-20 05:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-20 05:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-20 05:19:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:19:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.107 1.124 0.935 0.968 2011-Dec-20 05:19:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.975 1.039 1.121 0.909 2011-Dec-20 05:19:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.871 0.907 0.934 1.116 2011-Dec-20 05:19:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 0.014 0.946 0.014 2011-Dec-20 05:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-20 05:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-20 05:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-20 05:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-20 05:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-20 05:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-20 05:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-20 05:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-20 05:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-20 05:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-20 05:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-20 05:20:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:20:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.110 1.126 0.934 0.967 2011-Dec-20 05:20:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.974 1.037 1.116 0.906 2011-Dec-20 05:20:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.865 0.896 0.935 1.118 2011-Dec-20 05:20:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.014 0.945 0.014 2011-Dec-20 05:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-20 05:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-20 05:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-20 05:21:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:21:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 1.119 0.934 0.967 2011-Dec-20 05:21:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.976 1.041 1.124 0.913 2011-Dec-20 05:21:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.865 0.895 0.936 1.115 2011-Dec-20 05:21:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.014 0.944 0.014 2011-Dec-20 05:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-20 05:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-20 05:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-20 05:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-20 05:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-20 05:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-20 05:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 05:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-20 05:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-20 05:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-20 05:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-20 05:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:22:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:22:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 1.116 0.932 0.967 2011-Dec-20 05:22:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.973 1.037 1.118 0.909 2011-Dec-20 05:22:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.873 0.908 0.936 1.116 2011-Dec-20 05:22:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.014 0.944 0.014 2011-Dec-20 05:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-20 05:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-20 05:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:22:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-20 05:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:22:53 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-20 05:22:53 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-20 05:22:53 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-20 05:22:53 LOG5 end_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2011-Dec-20 05:22:53 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-20 05:22:53 LOG5 end_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2011-Dec-20 05:22:53 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-20 05:22:53 LOG5 finish_task: Level: (2) ID = <10193> Status = 0 0 0 0 ok 2011-Dec-20 05:22:53 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-20 05:22:53 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-20 05:22:53 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-20 05:22:53 LOG5 end_task: Level: (2) ID = <10193> Status = 0 0 0 0 ok 2011-Dec-20 05:22:53 COMMAND run_command_line: EXECUTING command 41: 'ENDIF' 2011-Dec-20 05:22:53 COMMAND run_command_line: EXECUTING command 44: 'IF LSTSLEW(AGES3193_p3_034) < 105341 THEN' 2011-Dec-20 05:22:53 LOG3 is_if_valid: Current source data: up 111.7 14.0 UP - - 25 1.8 2011-Dec-20 05:22:53 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_034) < 105341 2011-Dec-20 05:22:53 INFO5 is_if_valid: Condition parsed as: 10.868660999999999 < 10.894722222222221 2011-Dec-20 05:22:53 COMMAND run_command_line: EXECUTING command 45: 'FIXEDDRIFT az=110.87 alfaangle=-88.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_034 ra=95300.00 dec=230330.00' 2011-Dec-20 05:22:53 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-20 05:22:54 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-20 05:22:54 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 110.87 -88.8 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_034 95300.00 230330.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-20 05:22:54 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-20 05:22:54 LOG5 begin_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2011-Dec-20 05:22:54 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_032' 2011-Dec-20 05:22:54 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-20 05:22:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_034} 2011-Dec-20 05:22:54 INFO3 fixed_driftmap: Sending telescope to Az = 110.87 and ZA = 14.77 2011-Dec-20 05:22:54 LOG3 track_source: Calling 'track_source AGES3193_p3_034 110.87 14.7730874261 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-20 05:22:54 START begin_task: Starting task 'sending tracking commands' 2011-Dec-20 05:22:54 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2011-Dec-20 05:22:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_034} INFO {Slewing to source 'AGES3193_p3_034' ...} 2011-Dec-20 05:22:54 INFO1 track_source: Starting to track AGES3193_p3_034 2011-Dec-20 05:22:54 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_034" 2011-Dec-20 05:22:54 LOG3 vw_send: To DATATAKING: set ra 110.87 2011-Dec-20 05:22:54 LOG3 vw_send: To DATATAKING: set dec 14.7730874261 2011-Dec-20 05:22:54 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-20 05:22:54 LOG3 vw_send: To DATATAKING: pnt tr 110.87 14.7730874261 -CF 2011-Dec-20 05:22:54 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 05:22:54 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-20 05:22:54 LOG5 finish_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2011-Dec-20 05:22:54 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-20 05:22:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 05:22:54 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-20 05:22:54 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2011-Dec-20 05:22:54 START begin_task: Starting task 'rotate ALFA to -88.8 degrees' 2011-Dec-20 05:22:54 LOG5 begin_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2011-Dec-20 05:22:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -88.8 degrees ...} 2011-Dec-20 05:22:54 INFO2 rotate_alfa: ALFA commanded to -88.8 degrees 2011-Dec-20 05:22:54 LOG3 sock_errsend: To ALFAMOTOR: POSITION -88.8 REPLY 2011-Dec-20 05:22:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-20 05:22:54 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-20 05:22:54 LOG5 begin_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2011-Dec-20 05:22:54 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_034" 2011-Dec-20 05:22:54 LOG4 got_cormsg: From DATATAKING: set ra 110.87 2011-Dec-20 05:22:54 LOG4 got_cormsg: From DATATAKING: set dec 14.7730874261 2011-Dec-20 05:22:54 LOG4 got_cormsg: From DATATAKING: vw% 110.87 2011-Dec-20 05:22:54 LOG4 got_cormsg: From DATATAKING: vw% 14.7730874261 2011-Dec-20 05:22:54 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:22:54 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-20 05:22:54 LOG4 got_cormsg: From DATATAKING: pnt tr 110.87 14.7730874261 -CF 2011-Dec-20 05:22:54 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 05:22:54 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-20 05:22:54 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:24:27 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-20 05:24:27 INFO3 alfa_motor: ALFA rotator in-position -88.80 degrees 2011-Dec-20 05:24:27 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-20 05:24:27 LOG5 end_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2011-Dec-20 05:24:27 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-20 05:24:27 STOP finish_task: Finishing task 'rotate ALFA to -88.8 degrees' 2011-Dec-20 05:24:27 LOG5 finish_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2011-Dec-20 05:24:27 INFO2 finish_task: DONE finished configuration: rotating ALFA to -88.8 degrees 2011-Dec-20 05:24:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 05:24:27 STOP end_task: Finishing task 'rotate ALFA to -88.8 degrees' with status 'OK' 2011-Dec-20 05:24:27 LOG5 end_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2011-Dec-20 05:24:27 START begin_task: Starting task 'waiting on telescope' 2011-Dec-20 05:24:27 LOG5 begin_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2011-Dec-20 05:24:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-20 05:24:27 LOG3 waittrk: Start waittrk 5 2011-Dec-20 05:24:27 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-20 05:24:27 LOG5 begin_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2011-Dec-20 05:24:32 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-20 05:24:32 LOG5 end_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2011-Dec-20 05:24:32 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-20 05:24:32 LOG5 begin_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2011-Dec-20 05:25:06 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-20 05:25:06 LOG5 end_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2011-Dec-20 05:25:06 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-20 05:25:06 INFO2 waittrk: Now tracking AGES3193_p3_034 2011-Dec-20 05:25:06 LOG4 waittrk: Current telescope position: Az = 110.60 ZA = 14.79 2011-Dec-20 05:25:06 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-20 05:25:06 LOG5 finish_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2011-Dec-20 05:25:06 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-20 05:25:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 05:25:06 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-20 05:25:06 LOG5 end_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2011-Dec-20 05:25:06 START begin_task: Starting task 'selecting calibration type' 2011-Dec-20 05:25:06 LOG5 begin_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2011-Dec-20 05:25:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-20 05:25:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-20 05:25:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 05:25:06 START begin_task: Starting task 'waiting on setcal' 2011-Dec-20 05:25:06 LOG5 begin_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2011-Dec-20 05:25:06 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-20 05:25:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 05:25:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:25:07 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-20 05:25:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-20 05:25:07 LOG5 end_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2011-Dec-20 05:25:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-20 05:25:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-20 05:25:07 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-20 05:25:07 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-20 05:25:07 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2011-Dec-20 05:25:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:25:07 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-20 05:25:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-20 05:25:07 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2011-Dec-20 05:25:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-20 05:25:07 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-20 05:25:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-20 05:25:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-20 05:25:07 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-20 05:25:07 LOG5 begin_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2011-Dec-20 05:25:07 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-20 05:25:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-20 05:25:07 LOG5 end_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2011-Dec-20 05:25:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-20 05:25:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-20 05:25:07 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-20 05:25:07 LOG5 end_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2011-Dec-20 05:25:07 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Dec-20 05:25:07 INFO2 astwait: Waiting for 8 seconds from 09:25:07 to 09:25:15 UTC ... 2011-Dec-20 05:25:07 LOG4 send_obs_status: To obs_status: <1> TASKTIME 8 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-20 05:25:07 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Dec-20 05:25:07 LOG5 begin_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2011-Dec-20 05:25:15 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Dec-20 05:25:15 LOG5 end_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2011-Dec-20 05:25:15 INFO3 astwait: Finished waiting 2011-Dec-20 05:25:15 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-20 05:25:15 LOG5 dopset_later: Calling 'dopset_later 60.651280186219822' 2011-Dec-20 05:25:15 INFO3 dopset_later: Setting Doppler correction for 05:26:15 (60.7 seconds from now) 2011-Dec-20 05:25:15 LOG5 antvel: Calling 'antvel 110.870000 14.773087 F Heliocentric 60.651280186219822' 2011-Dec-20 05:25:15 LOG2 antvel: Transforming current Az = 110.87 ZA = 14.77 to apparent RA = 09:53:42.0 Dec = +22:59:51.7 2011-Dec-20 05:25:15 LOG2 antvel: Parameters to Doppler: Heliocentric 33975 2011 354 0.0 2011-Dec-20 05:25:15 INFO5 antvel: Computed antenna velocity: -24.14661 km/s 2011-Dec-20 05:25:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-24.146608000699999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-20 05:25:15 INFO4 dopset_gen: New sky frequencies: 1381.354689 1381.354689 1381.354689 1381.354689 1381.354689 1381.354689 1381.354689 1381.354689 1381.354689 2011-Dec-20 05:25:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.354689 sky0=1381.354689 sky1=1381.354689 sky2=1381.354689 sky3=1381.354689 sky4=1381.354689 sky5=1381.354689 sky6=1381.354689 sky7=1381.354689 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-20 05:25:15 LOG2 dopset_gen: Result from 'sky2syn': 1631.354689 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-20 05:25:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631354689.0} 2011-Dec-20 05:25:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 05:25:15 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-20 05:25:15 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-20 05:25:15 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:04.0 Dec = +23:03:15.4 2011-Dec-20 05:25:15 LOG3 track_source: Calling 'track_source AGES3193_p3_034 095204.0 230315.4 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-20 05:25:15 START begin_task: Starting task 'sending tracking commands' 2011-Dec-20 05:25:15 LOG5 begin_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2011-Dec-20 05:25:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_034} INFO {Slewing to source 'AGES3193_p3_034' ...} 2011-Dec-20 05:25:15 INFO1 track_source: Starting to track AGES3193_p3_034 2011-Dec-20 05:25:15 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_034" 2011-Dec-20 05:25:15 LOG3 vw_send: To DATATAKING: set ra 095204.0 2011-Dec-20 05:25:15 LOG3 vw_send: To DATATAKING: set dec 230315.4 2011-Dec-20 05:25:15 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-20 05:25:15 LOG3 vw_send: To DATATAKING: pnt tr 095204.0 230315.4 -CJ 2011-Dec-20 05:25:15 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 05:25:15 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-20 05:25:15 LOG5 finish_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2011-Dec-20 05:25:15 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-20 05:25:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 05:25:15 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-20 05:25:15 LOG5 end_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2011-Dec-20 05:25:15 START begin_task: Starting task 'waiting on telescope' 2011-Dec-20 05:25:15 LOG5 begin_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2011-Dec-20 05:25:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-20 05:25:15 LOG3 waittrk: Start waittrk 5 2011-Dec-20 05:25:15 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-20 05:25:15 LOG5 begin_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2011-Dec-20 05:25:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631354689.0} 2011-Dec-20 05:25:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 05:25:15 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:25:15 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_034" 2011-Dec-20 05:25:15 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-20 05:25:15 LOG4 got_cormsg: From DATATAKING: set ra 095204.0 2011-Dec-20 05:25:15 LOG4 got_cormsg: From DATATAKING: set dec 230315.4 2011-Dec-20 05:25:15 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-20 05:25:15 LOG4 got_cormsg: From DATATAKING: pnt tr 095204.0 230315.4 -CJ 2011-Dec-20 05:25:15 LOG4 got_cormsg: From DATATAKING: 095204.0 2011-Dec-20 05:25:15 LOG4 got_cormsg: From DATATAKING: vw% 230315.4 2011-Dec-20 05:25:15 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2011-Dec-20 05:25:15 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 05:25:15 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:25:20 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-20 05:25:20 LOG5 end_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2011-Dec-20 05:25:20 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-20 05:25:20 LOG5 begin_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2011-Dec-20 05:25:22 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-20 05:25:22 LOG5 end_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2011-Dec-20 05:25:22 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-20 05:25:22 INFO2 waittrk: Now tracking AGES3193_p3_034 2011-Dec-20 05:25:22 LOG4 waittrk: Current telescope position: Az = 110.57 ZA = 14.80 2011-Dec-20 05:25:22 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-20 05:25:22 LOG5 finish_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2011-Dec-20 05:25:22 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-20 05:25:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 05:25:22 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-20 05:25:22 LOG5 end_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2011-Dec-20 05:25:22 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-20 05:25:22 LOG5 begin_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2011-Dec-20 05:25:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-20 05:25:22 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-20 05:25:22 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-20 05:25:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-20 05:25:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 05:25:22 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-20 05:25:22 LOG5 begin_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2011-Dec-20 05:25:23 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-20 05:25:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 05:25:25 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:25:25 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-20 05:25:25 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-20 05:25:25 LOG5 end_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2011-Dec-20 05:25:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-20 05:25:25 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-20 05:25:25 LOG5 begin_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2011-Dec-20 05:25:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-20 05:25:26 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-20 05:25:26 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-20 05:25:26 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-20 05:25:26 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-20 05:25:26 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-20 05:25:26 LOG5 begin_task: Level: (5) ID = <10255> Status = 0 0 0 0 ok 2011-Dec-20 05:25:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-20 05:25:26 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:25:26 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 8 6 dB 2011-Dec-20 05:25:26 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 3 dB 2011-Dec-20 05:25:26 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2011-Dec-20 05:25:26 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 3 4 dB 2011-Dec-20 05:25:26 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-20 05:25:26 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-20 05:25:26 LOG5 end_task: Level: (5) ID = <10255> Status = 0 0 0 0 ok 2011-Dec-20 05:25:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.917 0.909 ALFA beam 1: 0.970 0.954 2011-Dec-20 05:25:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.994 1.062 ALFA beam 3: 1.118 0.951 2011-Dec-20 05:25:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.887 0.987 ALFA beam 5: 1.039 0.937 2011-Dec-20 05:25:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.934 0.014 ALFA beam 7: 1.021 0.014 2011-Dec-20 05:25:26 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-20 05:25:26 LOG5 finish_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2011-Dec-20 05:25:26 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-20 05:25:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 05:25:26 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-20 05:25:26 LOG5 end_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2011-Dec-20 05:25:26 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-20 05:25:26 LOG5 begin_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2011-Dec-20 05:25:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-20 05:25:26 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-20 05:25:26 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-20 05:25:26 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-20 05:25:26 LOG5 begin_task: Level: (5) ID = <10257> Status = 0 0 0 0 ok 2011-Dec-20 05:25:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:25:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.917 0.909 0.970 0.954 2011-Dec-20 05:25:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.994 1.062 1.118 0.951 2011-Dec-20 05:25:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.887 0.987 1.039 0.937 2011-Dec-20 05:25:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.934 0.014 1.021 0.014 2011-Dec-20 05:25:32 INFO3 from_mock: From MOCK: b0s0g0 rms:A 32.2 28.3 B 31.4 31.4 mn:A 0.0 -0.1 B -0.4 -0.4 gn: 11 11 2011-Dec-20 05:25:32 INFO3 from_mock: From MOCK: b0s1g0 rms:A 28.7 27.4 B 29.1 30.8 mn:A -0.0 -0.4 B -0.8 0.1 gn: 11 11 2011-Dec-20 05:25:32 INFO3 from_mock: From MOCK: b1s0g0 rms:A 31.6 29.6 B 33.4 29.3 mn:A 0.4 0.8 B 0.1 -0.0 gn: 7 11 2011-Dec-20 05:25:32 INFO3 from_mock: From MOCK: b1s1g0 rms:A 31.1 28.7 B 31.7 31.8 mn:A -0.3 -0.2 B 0.5 0.1 gn: 8 10 2011-Dec-20 05:25:32 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.8 28.9 B 29.1 30.4 mn:A 0.1 -0.3 B 0.3 0.0 gn: 10 11 2011-Dec-20 05:25:32 INFO3 from_mock: From MOCK: b2s1g0 rms:A 30.6 30.9 B 30.0 27.9 mn:A 0.3 -0.2 B -0.1 0.1 gn: 11 11 2011-Dec-20 05:25:32 INFO3 from_mock: From MOCK: b3s0g0 rms:A 29.9 29.6 B 32.1 28.7 mn:A 0.4 -0.2 B 0.1 -0.3 gn: 12 12 2011-Dec-20 05:25:32 INFO3 from_mock: From MOCK: b3s1g0 rms:A 31.2 30.5 B 30.5 31.8 mn:A -0.3 0.4 B 0.2 0.1 gn: 12 12 2011-Dec-20 05:25:32 INFO3 from_mock: From MOCK: b4s0g0 rms:A 31.4 30.4 B 29.7 29.9 mn:A -0.2 -0.3 B -0.4 0.1 gn: 13 11 2011-Dec-20 05:25:32 INFO3 from_mock: From MOCK: b4s1g0 rms:A 30.4 27.5 B 32.1 31.0 mn:A 0.0 -0.0 B -0.3 0.2 gn: 15 13 2011-Dec-20 05:25:32 INFO3 from_mock: From MOCK: b5s0g0 rms:A 30.9 29.8 B 29.2 29.2 mn:A 0.6 0.4 B -0.0 0.3 gn: 12 10 2011-Dec-20 05:25:32 INFO3 from_mock: From MOCK: b5s1g0 rms:A 30.8 30.6 B 29.0 28.7 mn:A -0.4 0.3 B -0.0 0.1 gn: 12 10 2011-Dec-20 05:25:32 INFO3 from_mock: From MOCK: b6s0g0 rms:A 30.1 27.5 B 14.7 15.1 mn:A -0.4 0.1 B 0.4 -0.5 gn: 12 31 2011-Dec-20 05:25:32 INFO3 from_mock: From MOCK: b6s1g0 rms:A 30.7 27.9 B 11.6 11.3 mn:A 0.5 0.5 B 0.0 0.2 gn: 13 31 2011-Dec-20 05:25:32 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-20 05:25:32 LOG5 end_task: Level: (5) ID = <10257> Status = 0 0 0 0 ok 2011-Dec-20 05:25:32 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-20 05:25:32 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-20 05:25:32 LOG5 finish_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2011-Dec-20 05:25:32 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-20 05:25:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 05:25:32 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-20 05:25:32 LOG5 end_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2011-Dec-20 05:25:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-20 05:25:32 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-20 05:25:32 LOG5 finish_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2011-Dec-20 05:25:32 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-20 05:25:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 05:25:32 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-20 05:25:32 LOG5 end_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2011-Dec-20 05:25:32 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ep 2011-Dec-20 05:25:32 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ep 2011-Dec-20 05:25:33 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ep 2011-Dec-20 05:25:33 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ep 2011-Dec-20 05:25:33 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-20 05:25:33 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-20 05:25:33 LOG5 begin_task: Level: (3) ID = <10258> Status = 0 0 0 0 ok 2011-Dec-20 05:25:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-20 05:25:33 START begin_task: Starting task 'selecting calibration type' 2011-Dec-20 05:25:33 LOG5 begin_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2011-Dec-20 05:25:33 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-20 05:25:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-20 05:25:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 05:25:33 START begin_task: Starting task 'waiting on setcal' 2011-Dec-20 05:25:33 LOG5 begin_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2011-Dec-20 05:25:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ep' 2011-Dec-20 05:25:33 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-20 05:25:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 05:25:33 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:25:33 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-20 05:25:33 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-20 05:25:33 LOG5 end_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2011-Dec-20 05:25:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-20 05:25:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-20 05:25:33 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-20 05:25:33 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-20 05:25:33 LOG5 begin_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2011-Dec-20 05:25:33 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:25:33 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-20 05:25:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-20 05:25:33 LOG5 end_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2011-Dec-20 05:25:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-20 05:25:33 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-20 05:25:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-20 05:25:33 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-20 05:25:33 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-20 05:25:33 LOG5 begin_task: Level: (5) ID = <10262> Status = 0 0 0 0 ok 2011-Dec-20 05:25:33 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-20 05:25:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-20 05:25:33 LOG5 end_task: Level: (5) ID = <10262> Status = 0 0 0 0 ok 2011-Dec-20 05:25:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-20 05:25:33 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-20 05:25:33 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-20 05:25:33 LOG5 end_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2011-Dec-20 05:25:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-20 05:25:33 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-20 05:25:33 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-20 05:25:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-20 05:25:33 LOG5 begin_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2011-Dec-20 05:25:33 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-20 05:25:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-20 05:25:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-20 05:25:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-20 05:25:33 LOG5 end_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2011-Dec-20 05:25:33 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-20 05:25:33 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-20 05:25:33 LOG5 begin_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2011-Dec-20 05:25:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-20 05:25:33 LOG5 log_alfabeam: Parameters: 9.8677777777777784 23.054277777777777 10.883506 2011.969818142064 -88.800034 2011-Dec-20 05:25:33 LOG4 log_alfabeam: ALFABEAM 0 9.867777777777782 23.054277777777777 2011-Dec-20 05:25:33 LOG4 log_alfabeam: ALFABEAM 1 9.865749896055268 23.145357224213171 2011-Dec-20 05:25:33 LOG4 log_alfabeam: ALFABEAM 2 9.860364505092265 23.084446117258928 2011-Dec-20 05:25:33 LOG4 log_alfabeam: ALFABEAM 3 9.862423510136802 22.993246316805141 2011-Dec-20 05:25:33 LOG4 log_alfabeam: ALFABEAM 4 9.869842881460844 22.963603044169556 2011-Dec-20 05:25:33 LOG4 log_alfabeam: ALFABEAM 5 9.875188260873720 23.024057580204953 2011-Dec-20 05:25:33 LOG4 log_alfabeam: ALFABEAM 6 9.873154054282491 23.114612421840729 2011-Dec-20 05:25:33 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-20 05:25:33 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-20 05:25:33 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-20 05:25:33 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_034 2011-Dec-20 05:25:33 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-20 05:25:33 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-20 05:25:33 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-20 05:25:33 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-20 05:25:33 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-20 05:25:33 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-20 05:25:33 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-20 05:25:33 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-20 05:25:33 LOG3 take_mock_data: PSET configuration: patternid=135400075 2011-Dec-20 05:25:33 LOG3 take_mock_data: PSET configuration: scanid=135400076 2011-Dec-20 05:25:33 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-20 05:25:33 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-20 05:25:33 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-20 05:25:33 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456354689.0 2011-Dec-20 05:25:33 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306354689.0 2011-Dec-20 05:25:33 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-20 05:25:33 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-20 05:25:33 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_034:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=135400075:scanid=135400076:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456354689.0:topobfreqhz=1306354689.0:filetype=1 2011-Dec-20 05:25:33 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-20 05:25:33 LOG5 begin_task: Level: (5) ID = <10265> Status = 0 0 0 0 ok 2011-Dec-20 05:25:34 LOG4 from_mock: From MOCK: psetok 2011-Dec-20 05:25:34 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-20 05:25:34 LOG5 end_task: Level: (5) ID = <10265> Status = 0 0 0 0 ok 2011-Dec-20 05:25:34 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-20 05:25:34 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-20 05:25:34 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-20 05:25:34 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-20 05:25:34 LOG5 begin_task: Level: (5) ID = <10266> Status = 0 0 0 0 ok 2011-Dec-20 05:25:34 NOTE WAPPDATA-new_file: New FITS file: wapp.20111220.a2048.0006.fits 2011-Dec-20 05:25:34 LOG4 from_mock: From MOCK: starok 2011-Dec-20 05:25:34 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-20 05:25:34 LOG5 end_task: Level: (5) ID = <10266> Status = 0 0 0 0 ok 2011-Dec-20 05:25:34 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-20 05:25:34 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135400076 2011-Dec-20 05:25:34 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-20 05:25:34 LOG5 begin_task: Level: (5) ID = <10267> Status = 0 0 0 0 ok 2011-Dec-20 05:25:34 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111220.a2048.0006.fits} 2011-Dec-20 05:25:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-20 05:25:34 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-20 05:25:34 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-20 05:25:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-20 05:25:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 33935.00 2011-Dec-20 05:25:36 INFO2 got_mock_message: Mock spectrometer start file number is 01500 2011-Dec-20 05:25:36 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-20 05:25:36 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-20 05:25:36 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-20 05:25:36 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-20 05:25:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-20 05:25:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-20 05:25:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-20 05:25:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-20 05:25:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-20 05:25:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-20 05:25:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-20 05:25:36 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-20 05:25:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 05:25:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 05:25:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 05:25:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 05:25:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 05:25:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 05:25:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 05:25:39 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:25:39.01 2011-Dec-20 05:25:39 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324373139.01 Tue Dec 20 05:25:39 2011 2011-Dec-20 05:25:39 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-20 05:25:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.354689 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-20 05:25:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.354689 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2011-Dec-20 05:25:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.354689 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2011-Dec-20 05:25:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.354689 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2011-Dec-20 05:25:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.354689 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2011-Dec-20 05:25:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.354689 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:25:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.354689 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:25:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.354689 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:25:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.354689 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.308 (still bad) 2011-Dec-20 05:25:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-20 05:25:45 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-20 05:25:45 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-20 05:25:45 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-20 05:25:45 LOG5 end_task: Level: (5) ID = <10267> Status = 0 0 0 0 ok 2011-Dec-20 05:25:45 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-20 05:25:45 LOG5 end_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2011-Dec-20 05:25:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-20 05:25:45 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-20 05:25:45 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-20 05:25:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-20 05:25:45 LOG5 begin_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2011-Dec-20 05:25:45 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-20 05:25:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-20 05:25:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-20 05:25:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-20 05:25:45 LOG5 end_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2011-Dec-20 05:25:45 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-20 05:25:45 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-20 05:25:45 LOG5 begin_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2011-Dec-20 05:25:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-20 05:25:45 LOG5 log_alfabeam: Parameters: 9.8677777777777784 23.054277777777777 10.886570 2011.9698184906329 -88.800034 2011-Dec-20 05:25:45 LOG4 log_alfabeam: ALFABEAM 0 9.867777777777782 23.054277777777777 2011-Dec-20 05:25:45 LOG4 log_alfabeam: ALFABEAM 1 9.865742880216391 23.145327088395149 2011-Dec-20 05:25:45 LOG4 log_alfabeam: ALFABEAM 2 9.860362207229439 23.084338227150184 2011-Dec-20 05:25:45 LOG4 log_alfabeam: ALFABEAM 3 9.862428147887117 22.993169405201954 2011-Dec-20 05:25:45 LOG4 log_alfabeam: ALFABEAM 4 9.869849742847503 22.963632541476390 2011-Dec-20 05:25:45 LOG4 log_alfabeam: ALFABEAM 5 9.875190566075707 23.024165355545382 2011-Dec-20 05:25:45 LOG4 log_alfabeam: ALFABEAM 6 9.873149419249303 23.114691535360851 2011-Dec-20 05:25:45 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-20 05:25:45 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-20 05:25:45 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-20 05:25:45 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_034 2011-Dec-20 05:25:45 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-20 05:25:45 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-20 05:25:45 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-20 05:25:45 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-20 05:25:45 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-20 05:25:45 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-20 05:25:45 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-20 05:25:45 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-20 05:25:45 LOG3 take_mock_data: PSET configuration: patternid=135400075 2011-Dec-20 05:25:45 LOG3 take_mock_data: PSET configuration: scanid=135400077 2011-Dec-20 05:25:45 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-20 05:25:45 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-20 05:25:45 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-20 05:25:45 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456354689.0 2011-Dec-20 05:25:45 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306354689.0 2011-Dec-20 05:25:45 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-20 05:25:45 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-20 05:25:45 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_034:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=135400075:scanid=135400077:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456354689.0:topobfreqhz=1306354689.0:filetype=1 2011-Dec-20 05:25:45 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-20 05:25:45 LOG5 begin_task: Level: (5) ID = <10270> Status = 0 0 0 0 ok 2011-Dec-20 05:25:45 LOG4 from_mock: From MOCK: psetok 2011-Dec-20 05:25:45 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-20 05:25:45 LOG5 end_task: Level: (5) ID = <10270> Status = 0 0 0 0 ok 2011-Dec-20 05:25:45 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-20 05:25:45 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-20 05:25:45 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-20 05:25:45 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-20 05:25:45 LOG5 begin_task: Level: (5) ID = <10271> Status = 0 0 0 0 ok 2011-Dec-20 05:25:45 LOG4 from_mock: From MOCK: starok 2011-Dec-20 05:25:45 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-20 05:25:45 LOG5 end_task: Level: (5) ID = <10271> Status = 0 0 0 0 ok 2011-Dec-20 05:25:45 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-20 05:25:45 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135400077 2011-Dec-20 05:25:45 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-20 05:25:45 LOG5 begin_task: Level: (5) ID = <10272> Status = 0 0 0 0 ok 2011-Dec-20 05:25:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-20 05:25:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-20 05:25:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 33946.00 2011-Dec-20 05:25:46 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-20 05:25:46 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-20 05:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.544 (still bad) 2011-Dec-20 05:25:48 INFO2 got_mock_message: Mock spectrometer start file number is 01600 2011-Dec-20 05:25:48 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-20 05:25:48 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-20 05:25:48 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-20 05:25:48 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-20 05:25:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-20 05:25:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-20 05:25:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-20 05:25:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-20 05:25:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-20 05:25:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-20 05:25:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-20 05:25:48 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-20 05:25:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 05:25:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 05:25:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 05:25:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 05:25:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 05:25:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 05:25:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-20 05:25:50 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:25:51.01 2011-Dec-20 05:25:51 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324373151.01 Tue Dec 20 05:25:51 2011 2011-Dec-20 05:25:51 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-20 05:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.354689 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-20 05:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.354689 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2011-Dec-20 05:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.354689 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2011-Dec-20 05:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.354689 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2011-Dec-20 05:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.354689 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2011-Dec-20 05:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.354689 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.354689 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.354689 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.354689 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:25:51 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-20 05:25:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-20 05:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:25:56 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-20 05:25:57 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-20 05:25:57 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-20 05:25:57 LOG5 end_task: Level: (5) ID = <10272> Status = 0 0 0 0 ok 2011-Dec-20 05:25:57 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-20 05:25:57 LOG5 end_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2011-Dec-20 05:25:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-20 05:25:57 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-20 05:25:57 LOG5 finish_task: Level: (3) ID = <10258> Status = 0 0 0 0 ok 2011-Dec-20 05:25:57 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-20 05:25:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 05:25:57 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-20 05:25:57 LOG5 end_task: Level: (3) ID = <10258> Status = 0 0 0 0 ok 2011-Dec-20 05:25:57 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-20 05:25:57 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 110.87 and ZA = 14.77 2011-Dec-20 05:25:57 LOG3 track_source: Calling 'track_source AGES3193_p3_034 110.87 14.7730874261 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-20 05:25:57 START begin_task: Starting task 'sending tracking commands' 2011-Dec-20 05:25:57 LOG5 begin_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2011-Dec-20 05:25:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_034} INFO {Slewing to source 'AGES3193_p3_034' ...} 2011-Dec-20 05:25:57 INFO1 track_source: Starting to track AGES3193_p3_034 2011-Dec-20 05:25:57 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_034" 2011-Dec-20 05:25:57 LOG3 vw_send: To DATATAKING: set ra 110.87 2011-Dec-20 05:25:57 LOG3 vw_send: To DATATAKING: set dec 14.7730874261 2011-Dec-20 05:25:57 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-20 05:25:57 LOG3 vw_send: To DATATAKING: pnt tr 110.87 14.7730874261 -CF 2011-Dec-20 05:25:57 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 05:25:57 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-20 05:25:57 LOG5 finish_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2011-Dec-20 05:25:57 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-20 05:25:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 05:25:57 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-20 05:25:57 LOG5 end_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2011-Dec-20 05:25:57 LOG1 fixed_driftmap: Parameters: HA = +01:00:00.2 Start = 10:53:42.4 LST = 10:53:23.7 diff = 18.7 secs 2011-Dec-20 05:25:57 INFO2 fixed_driftmap: Waiting 16.7 seconds for RA 9:53:42 2011-Dec-20 05:25:57 INFO2 lstwait: Waiting for 16.7 secs from LST 10:53:24 to LST 10:53:40 ... 2011-Dec-20 05:25:57 LOG4 send_obs_status: To obs_status: <1> TASKTIME 16.655335604779061 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-20 05:25:57 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-20 05:25:57 LOG5 begin_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2011-Dec-20 05:25:57 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_034" 2011-Dec-20 05:25:57 LOG4 got_cormsg: From DATATAKING: set ra 110.87 2011-Dec-20 05:25:57 LOG4 got_cormsg: From DATATAKING: set dec 14.7730874261 2011-Dec-20 05:25:57 LOG4 got_cormsg: From DATATAKING: vw% 110.87 2011-Dec-20 05:25:57 LOG4 got_cormsg: From DATATAKING: vw% 14.7730874261 2011-Dec-20 05:25:57 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:25:57 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-20 05:25:57 LOG4 got_cormsg: From DATATAKING: pnt tr 110.87 14.7730874261 -CF 2011-Dec-20 05:25:57 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-20 05:25:57 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-20 05:25:57 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:26:14 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-20 05:26:14 LOG5 end_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2011-Dec-20 05:26:14 LOG4 lstwait: Finished waiting 0.35 seconds late 2011-Dec-20 05:26:14 INFO3 lstwait: Finished waiting 2011-Dec-20 05:26:14 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-20 05:26:14 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-20 05:26:14 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-20 05:26:14 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-20 05:26:14 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-20 05:26:14 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-20 05:26:14 LOG5 begin_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2011-Dec-20 05:26:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-20 05:26:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-20 05:26:14 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-20 05:26:14 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-20 05:26:14 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-20 05:26:14 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_034 2011-Dec-20 05:26:14 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-20 05:26:14 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-20 05:26:14 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-20 05:26:14 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-20 05:26:14 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-20 05:26:14 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-20 05:26:14 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-20 05:26:14 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-20 05:26:14 LOG3 take_mock_data: PSET configuration: patternid=135400078 2011-Dec-20 05:26:14 LOG3 take_mock_data: PSET configuration: scanid=135400078 2011-Dec-20 05:26:14 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-20 05:26:14 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-20 05:26:14 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-20 05:26:14 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456354689.0 2011-Dec-20 05:26:14 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306354689.0 2011-Dec-20 05:26:14 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-20 05:26:14 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-20 05:26:14 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_034:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=135400078:scanid=135400078:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456354689.0:topobfreqhz=1306354689.0:filetype=1 2011-Dec-20 05:26:14 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-20 05:26:14 LOG5 begin_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2011-Dec-20 05:26:14 LOG4 from_mock: From MOCK: psetok 2011-Dec-20 05:26:14 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-20 05:26:14 LOG5 end_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2011-Dec-20 05:26:14 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-20 05:26:14 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-20 05:26:14 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-20 05:26:14 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-20 05:26:14 LOG5 begin_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2011-Dec-20 05:26:14 LOG4 from_mock: From MOCK: starok 2011-Dec-20 05:26:14 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-20 05:26:14 LOG5 end_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2011-Dec-20 05:26:14 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-20 05:26:14 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 135400078 2011-Dec-20 05:26:14 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-20 05:26:14 LOG5 begin_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2011-Dec-20 05:26:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-20 05:26:14 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-20 05:26:14 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-20 05:26:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-20 05:26:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 33975.00 2011-Dec-20 05:26:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.354689 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-20 05:26:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.354689 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2011-Dec-20 05:26:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.354689 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2011-Dec-20 05:26:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.354689 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2011-Dec-20 05:26:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.354689 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2011-Dec-20 05:26:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.354689 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:26:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.354689 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:26:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.354689 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:26:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.354689 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:26:16 INFO2 got_mock_message: Mock spectrometer start file number is 01700 2011-Dec-20 05:26:16 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-20 05:26:16 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2011-Dec-20 05:26:16 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-20 05:26:16 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-20 05:26:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-20 05:26:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-20 05:26:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-20 05:26:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-20 05:26:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-20 05:26:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-20 05:26:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-20 05:26:16 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-20 05:26:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 05:26:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 05:26:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 05:26:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 05:26:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 05:26:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 05:26:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-20 05:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:26:18 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:26:19.01 2011-Dec-20 05:26:19 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324373179.01 Tue Dec 20 05:26:19 2011 2011-Dec-20 05:26:19 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-20 05:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:26:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:26:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.919 0.908 0.972 0.952 2011-Dec-20 05:26:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.991 1.059 1.120 0.949 2011-Dec-20 05:26:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.888 0.985 1.045 0.957 2011-Dec-20 05:26:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.937 0.014 1.024 0.014 2011-Dec-20 05:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-20 05:27:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:27:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.922 0.909 0.979 0.957 2011-Dec-20 05:27:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.992 1.062 1.125 0.950 2011-Dec-20 05:27:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.887 0.985 1.044 0.958 2011-Dec-20 05:27:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.935 0.014 1.022 0.014 2011-Dec-20 05:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-20 05:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-20 05:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-20 05:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-20 05:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-20 05:28:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:28:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 0.902 0.971 0.949 2011-Dec-20 05:28:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.993 1.061 1.124 0.951 2011-Dec-20 05:28:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.887 0.983 1.041 0.955 2011-Dec-20 05:28:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.935 0.014 1.022 0.014 2011-Dec-20 05:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-20 05:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:29:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:29:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.924 0.903 0.971 0.948 2011-Dec-20 05:29:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.991 1.059 1.122 0.947 2011-Dec-20 05:29:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.887 0.984 1.042 0.956 2011-Dec-20 05:29:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.014 1.026 0.014 2011-Dec-20 05:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-20 05:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:30:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:30:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.922 0.902 0.973 0.947 2011-Dec-20 05:30:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 1.075 1.120 0.948 2011-Dec-20 05:30:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.887 0.983 1.044 0.955 2011-Dec-20 05:30:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.936 0.014 1.023 0.014 2011-Dec-20 05:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:31:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:31:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.923 0.901 0.969 0.946 2011-Dec-20 05:31:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.989 1.057 1.121 0.949 2011-Dec-20 05:31:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.884 0.982 1.046 0.956 2011-Dec-20 05:31:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.936 0.014 1.023 0.014 2011-Dec-20 05:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-20 05:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-20 05:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:32:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:32:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 0.897 0.970 0.945 2011-Dec-20 05:32:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.990 1.060 1.118 0.947 2011-Dec-20 05:32:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.885 0.981 1.042 0.954 2011-Dec-20 05:32:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.937 0.014 1.023 0.014 2011-Dec-20 05:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 05:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 05:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 05:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 05:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 05:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:33:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:33:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.923 0.894 0.967 0.943 2011-Dec-20 05:33:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.990 1.058 1.117 0.947 2011-Dec-20 05:33:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.884 0.982 1.046 0.959 2011-Dec-20 05:33:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.935 0.014 1.023 0.014 2011-Dec-20 05:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 05:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 05:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 05:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 05:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 05:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 05:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 05:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 05:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 05:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 05:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 05:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 05:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 05:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 05:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 05:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 05:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:34:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:34:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.923 0.893 0.969 0.942 2011-Dec-20 05:34:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.995 1.063 1.117 0.947 2011-Dec-20 05:34:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.883 0.980 1.043 0.957 2011-Dec-20 05:34:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.934 0.014 1.021 0.014 2011-Dec-20 05:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-20 05:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 05:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 05:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 05:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 05:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 05:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 05:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 05:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 05:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 05:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 05:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 05:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 05:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 05:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 05:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 05:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 05:35:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:35:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.922 0.889 0.966 0.941 2011-Dec-20 05:35:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 1.055 1.114 0.945 2011-Dec-20 05:35:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.883 0.975 1.046 0.955 2011-Dec-20 05:35:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.934 0.014 1.020 0.014 2011-Dec-20 05:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 05:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 05:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 05:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 05:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 05:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 05:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 05:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 05:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 05:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 05:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 05:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 05:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 05:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 05:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-20 05:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-20 05:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-20 05:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-20 05:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-20 05:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-20 05:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-20 05:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-20 05:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-20 05:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-20 05:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-20 05:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 05:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 05:36:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:36:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.923 0.890 0.963 0.939 2011-Dec-20 05:36:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 1.055 1.113 0.944 2011-Dec-20 05:36:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.882 0.974 1.039 0.949 2011-Dec-20 05:36:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.934 0.014 1.020 0.014 2011-Dec-20 05:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 05:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 05:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 05:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-20 05:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-20 05:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 05:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 05:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 05:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 05:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 05:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 05:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 05:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 05:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 05:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 05:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 05:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 05:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 05:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 05:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 05:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 05:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 05:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 05:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 05:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 05:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 05:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-20 05:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 05:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 05:37:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:37:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.923 0.890 0.963 0.937 2011-Dec-20 05:37:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 1.053 1.110 0.944 2011-Dec-20 05:37:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.880 0.972 1.038 0.948 2011-Dec-20 05:37:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.014 1.019 0.014 2011-Dec-20 05:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 05:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 05:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 05:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 05:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 05:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 05:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 05:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-20 05:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 05:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 05:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-20 05:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 05:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-20 05:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 05:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-20 05:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-20 05:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 05:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-20 05:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-20 05:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-20 05:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-20 05:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-20 05:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-20 05:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-20 05:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-20 05:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-20 05:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-20 05:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-20 05:38:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:38:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.924 0.889 0.970 0.943 2011-Dec-20 05:38:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 1.051 1.107 0.942 2011-Dec-20 05:38:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.883 0.972 1.041 0.950 2011-Dec-20 05:38:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.935 0.014 1.022 0.014 2011-Dec-20 05:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-20 05:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-20 05:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-20 05:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-20 05:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-20 05:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-20 05:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 05:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-20 05:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-20 05:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-20 05:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-20 05:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-20 05:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-20 05:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-20 05:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-20 05:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-20 05:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-20 05:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 05:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-20 05:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-20 05:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-20 05:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:39:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:39:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.924 0.890 0.967 0.939 2011-Dec-20 05:39:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 1.049 1.104 0.940 2011-Dec-20 05:39:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.879 0.971 1.039 0.947 2011-Dec-20 05:39:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.014 1.018 0.014 2011-Dec-20 05:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-20 05:39:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-20 05:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-20 05:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-20 05:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-20 05:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-20 05:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-20 05:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 05:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 05:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 05:40:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:40:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 0.889 0.962 0.934 2011-Dec-20 05:40:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.982 1.051 1.115 0.949 2011-Dec-20 05:40:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.882 0.973 1.038 0.946 2011-Dec-20 05:40:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.014 1.017 0.014 2011-Dec-20 05:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-20 05:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 05:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-20 05:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 05:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-20 05:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 05:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-20 05:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 05:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-20 05:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 05:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 05:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-20 05:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-20 05:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-20 05:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-20 05:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-20 05:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-20 05:41:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:41:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.942 0.906 0.959 0.934 2011-Dec-20 05:41:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.982 1.048 1.103 0.938 2011-Dec-20 05:41:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.880 0.970 1.035 0.945 2011-Dec-20 05:41:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.014 1.016 0.014 2011-Dec-20 05:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-20 05:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-20 05:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-20 05:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-20 05:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-20 05:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-20 05:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-20 05:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 05:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 05:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 05:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 05:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 05:42:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:42:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.922 0.888 0.963 0.935 2011-Dec-20 05:42:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.983 1.054 1.107 0.939 2011-Dec-20 05:42:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.878 0.970 1.037 0.946 2011-Dec-20 05:42:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.014 1.016 0.014 2011-Dec-20 05:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-20 05:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-20 05:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-20 05:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-20 05:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:43:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:43:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.922 0.886 0.965 0.937 2011-Dec-20 05:43:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.980 1.050 1.105 0.939 2011-Dec-20 05:43:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.879 0.973 1.036 0.947 2011-Dec-20 05:43:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.014 1.015 0.014 2011-Dec-20 05:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-20 05:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-20 05:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-20 05:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-20 05:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-20 05:44:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:44:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 0.886 0.960 0.932 2011-Dec-20 05:44:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.980 1.048 1.100 0.937 2011-Dec-20 05:44:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.877 0.969 1.036 0.948 2011-Dec-20 05:44:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.014 1.021 0.014 2011-Dec-20 05:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-20 05:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-20 05:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-20 05:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-20 05:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-20 05:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-20 05:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-20 05:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-20 05:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-20 05:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-20 05:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-20 05:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-20 05:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 05:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-20 05:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 05:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-20 05:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 05:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 05:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-20 05:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-20 05:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:45:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:45:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.920 0.884 0.970 0.944 2011-Dec-20 05:45:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.981 1.051 1.103 0.940 2011-Dec-20 05:45:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.877 0.971 1.032 0.946 2011-Dec-20 05:45:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.014 1.019 0.014 2011-Dec-20 05:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-20 05:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-20 05:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-20 05:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-20 05:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-20 05:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-20 05:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-20 05:46:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-20 05:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 05:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 05:46:20 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-20 05:46:20 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-20 05:46:20 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-20 05:46:20 LOG5 end_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2011-Dec-20 05:46:20 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-20 05:46:20 LOG5 end_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2011-Dec-20 05:46:20 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-20 05:46:20 LOG5 finish_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2011-Dec-20 05:46:20 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-20 05:46:20 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-20 05:46:20 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-20 05:46:20 LOG5 end_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2011-Dec-20 05:46:20 COMMAND run_command_line: EXECUTING command 48: 'ENDIF' 2011-Dec-20 05:46:20 COMMAND run_command_line: EXECUTING command 55: 'LOAD togs_cima31.conf' 2011-Dec-20 05:46:20 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2011-Dec-20 05:46:20 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-20 05:46:20 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2011-Dec-20 05:46:20 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima31.conf' 2011-Dec-20 05:46:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2011-Dec-20 05:46:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2011-Dec-20 05:46:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2011-Dec-20 05:46:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2011-Dec-20 05:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-20 05:46:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2011-Dec-20 05:46:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2011-Dec-20 05:46:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2011-Dec-20 05:46:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2011-Dec-20 05:46:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2011-Dec-20 05:46:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2011-Dec-20 05:46:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2011-Dec-20 05:46:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-20 05:46:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-20 05:46:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-20 05:46:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-20 05:46:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2011-Dec-20 05:46:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2011-Dec-20 05:46:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2011-Dec-20 05:46:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2011-Dec-20 05:46:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2011-Dec-20 05:46:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2011-Dec-20 05:46:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2011-Dec-20 05:46:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2011-Dec-20 05:46:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-20 05:46:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-20 05:46:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-20 05:46:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-20 05:46:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2011-Dec-20 05:46:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2011-Dec-20 05:46:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2011-Dec-20 05:46:22 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-20 05:46:22 BEGIN begin_task: Starting task 'configuring IF/LO path' 2011-Dec-20 05:46:22 LOG5 begin_task: Level: (2) ID = <10279> Status = 0 0 0 0 ok 2011-Dec-20 05:46:22 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2011-Dec-20 05:46:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2011-Dec-20 05:46:22 LOG1 config_iflo: Receiver ALFA already selected 2011-Dec-20 05:46:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-20 05:46:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-20 05:46:22 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-20 05:46:22 LOG5 begin_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2011-Dec-20 05:46:23 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-20 05:46:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-20 05:46:23 LOG5 end_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2011-Dec-20 05:46:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-20 05:46:23 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-20 05:46:23 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2011-Dec-20 05:46:23 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2011-Dec-20 05:46:23 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2011-Dec-20 05:46:23 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2011-Dec-20 05:46:23 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2011-Dec-20 05:46:23 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2011-Dec-20 05:46:23 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2011-Dec-20 05:46:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2011-Dec-20 05:46:23 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2011-Dec-20 05:46:23 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2011-Dec-20 05:46:23 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2011-Dec-20 05:46:23 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2011-Dec-20 05:46:23 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2011-Dec-20 05:46:23 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2011-Dec-20 05:46:23 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2011-Dec-20 05:46:23 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2011-Dec-20 05:46:23 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2011-Dec-20 05:46:23 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2011-Dec-20 05:46:23 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2011-Dec-20 05:46:23 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2011-Dec-20 05:46:23 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2011-Dec-20 05:46:23 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2011-Dec-20 05:46:23 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2011-Dec-20 05:46:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 05:46:23 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2011-Dec-20 05:46:23 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2011-Dec-20 05:46:23 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2011-Dec-20 05:46:23 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2011-Dec-20 05:46:23 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2011-Dec-20 05:46:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2011-Dec-20 05:46:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 05:46:23 START begin_task: Starting task 'waiting on configuring IF/LO path' 2011-Dec-20 05:46:23 LOG5 begin_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2011-Dec-20 05:46:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2011-Dec-20 05:46:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2011-Dec-20 05:46:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 05:46:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 05:46:24 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:46:24 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:46:24 LOG4 got_cormsg: From DATATAKING: vw% DONE 2011-Dec-20 05:46:24 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2011-Dec-20 05:46:24 LOG5 end_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2011-Dec-20 05:46:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2011-Dec-20 05:46:24 STOP finish_task: Finishing task 'configuring IF/LO path' 2011-Dec-20 05:46:24 LOG5 finish_task: Level: (2) ID = <10279> Status = 0 0 0 0 ok 2011-Dec-20 05:46:24 DONE finish_task: DONE finished configuration: IF/LO path 2011-Dec-20 05:46:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-20 05:46:25 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2011-Dec-20 05:46:25 LOG5 end_task: Level: (2) ID = <10279> Status = 0 0 0 0 ok 2011-Dec-20 05:46:25 BEGIN begin_task: Starting task 'configuring WAPPs' 2011-Dec-20 05:46:25 LOG5 begin_task: Level: (2) ID = <10282> Status = 0 0 0 0 ok 2011-Dec-20 05:46:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2011-Dec-20 05:46:25 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2011-Dec-20 05:46:25 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Dec-20 05:46:25 START begin_task: Starting task 'selecting calibration port' 2011-Dec-20 05:46:25 LOG5 begin_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2011-Dec-20 05:46:25 LOG3 vw_send: To DATATAKING: calport 3 2011-Dec-20 05:46:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Dec-20 05:46:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 05:46:25 START begin_task: Starting task 'waiting on calport' 2011-Dec-20 05:46:25 LOG5 begin_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2011-Dec-20 05:46:25 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:46:25 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Dec-20 05:46:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 05:46:25 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:46:25 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-20 05:46:25 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Dec-20 05:46:25 LOG5 end_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2011-Dec-20 05:46:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Dec-20 05:46:25 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Dec-20 05:46:25 LOG5 end_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2011-Dec-20 05:46:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-20 05:46:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-20 05:46:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-20 05:46:25 LOG5 begin_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2011-Dec-20 05:46:25 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:46:25 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-20 05:46:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-20 05:46:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-20 05:46:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-20 05:46:25 LOG5 end_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2011-Dec-20 05:46:25 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2011-Dec-20 05:46:25 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2011-Dec-20 05:46:25 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2011-Dec-20 05:46:25 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2011-Dec-20 05:46:25 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2011-Dec-20 05:46:25 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2011-Dec-20 05:46:25 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2011-Dec-20 05:46:25 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2011-Dec-20 05:46:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ep 2011-Dec-20 05:46:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ep 2011-Dec-20 05:46:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ep 2011-Dec-20 05:46:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ep 2011-Dec-20 05:46:25 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Dec-20 05:46:25 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Dec-20 05:46:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-20 05:46:25 LOG5 begin_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2011-Dec-20 05:46:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2011-Dec-20 05:46:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2011-Dec-20 05:46:25 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-20 05:46:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ep' 2011-Dec-20 05:46:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-20 05:46:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-20 05:46:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-20 05:46:25 LOG5 end_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2011-Dec-20 05:46:25 LOG3 sock_errsend: To WAPPDATA: FLUSH 2011-Dec-20 05:46:25 STOP finish_task: Finishing task 'configuring WAPPs' 2011-Dec-20 05:46:25 LOG5 finish_task: Level: (2) ID = <10282> Status = 0 0 0 0 ok 2011-Dec-20 05:46:25 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2011-Dec-20 05:46:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-20 05:46:26 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2011-Dec-20 05:46:26 LOG5 end_task: Level: (2) ID = <10282> Status = 0 0 0 0 ok 2011-Dec-20 05:46:26 COMMAND run_command_line: EXECUTING command 56: 'TRACKCURPOS' 2011-Dec-20 05:46:26 BEGIN begin_task: Starting task 'tracking current position' 2011-Dec-20 05:46:26 LOG5 begin_task: Level: (2) ID = <10287> Status = 0 0 0 0 ok 2011-Dec-20 05:46:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2011-Dec-20 05:46:26 INFO1 track_current_pos: Starting to track the current commanded position RA = 10:13:15.4 and Dec = +23:03:40.9 2011-Dec-20 05:46:26 LOG3 track_source: Calling 'track_source Cur-pos 101315.4 230340.9 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2011-Dec-20 05:46:26 START begin_task: Starting task 'sending tracking commands' 2011-Dec-20 05:46:26 LOG5 begin_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2011-Dec-20 05:46:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2011-Dec-20 05:46:26 INFO1 track_source: Starting to track Cur-pos 2011-Dec-20 05:46:26 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2011-Dec-20 05:46:26 LOG3 vw_send: To DATATAKING: set ra 101315.4 2011-Dec-20 05:46:26 LOG3 vw_send: To DATATAKING: set dec 230340.9 2011-Dec-20 05:46:26 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-20 05:46:26 LOG3 vw_send: To DATATAKING: pnt tr 101315.4 230340.9 -CJ 2011-Dec-20 05:46:26 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2011-Dec-20 05:46:26 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-20 05:46:26 LOG5 finish_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2011-Dec-20 05:46:26 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-20 05:46:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 05:46:26 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-20 05:46:26 LOG5 end_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2011-Dec-20 05:46:26 START begin_task: Starting task 'waiting on telescope' 2011-Dec-20 05:46:26 LOG5 begin_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2011-Dec-20 05:46:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-20 05:46:26 LOG3 waittrk: Start waittrk 5 2011-Dec-20 05:46:26 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-20 05:46:26 LOG5 begin_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2011-Dec-20 05:46:26 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2011-Dec-20 05:46:26 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2011-Dec-20 05:46:26 LOG4 got_cormsg: From DATATAKING: set ra 101315.4 2011-Dec-20 05:46:26 LOG4 got_cormsg: From DATATAKING: set dec 230340.9 2011-Dec-20 05:46:26 LOG4 got_cormsg: From DATATAKING: vw% 101315.4 2011-Dec-20 05:46:26 LOG4 got_cormsg: From DATATAKING: vw% 230340.9 2011-Dec-20 05:46:26 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:46:26 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-20 05:46:26 LOG4 got_cormsg: From DATATAKING: pnt tr 101315.4 230340.9 -CJ 2011-Dec-20 05:46:26 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2011-Dec-20 05:46:26 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-20 05:46:26 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:46:31 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-20 05:46:31 LOG5 end_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2011-Dec-20 05:46:31 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-20 05:46:31 LOG5 begin_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2011-Dec-20 05:46:35 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-20 05:46:35 LOG5 end_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2011-Dec-20 05:46:35 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-20 05:46:35 INFO2 waittrk: Now tracking Cur-pos 2011-Dec-20 05:46:35 LOG4 waittrk: Current telescope position: Az = 110.56 ZA = 14.82 2011-Dec-20 05:46:35 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-20 05:46:35 LOG5 finish_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2011-Dec-20 05:46:35 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-20 05:46:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 05:46:35 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-20 05:46:35 LOG5 end_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2011-Dec-20 05:46:35 STOP finish_task: Finishing task 'tracking current position' 2011-Dec-20 05:46:35 LOG5 finish_task: Level: (2) ID = <10287> Status = 0 0 0 0 ok 2011-Dec-20 05:46:35 DONE finish_task: DONE finished tracking: current position 2011-Dec-20 05:46:35 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-20 05:46:35 END end_task: Finishing task 'tracking current position' with status 'OK' 2011-Dec-20 05:46:35 LOG5 end_task: Level: (2) ID = <10287> Status = 0 0 0 0 ok 2011-Dec-20 05:46:35 COMMAND run_command_line: EXECUTING command 57: 'ALFAANGLE 19' 2011-Dec-20 05:46:35 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2011-Dec-20 05:46:35 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2011-Dec-20 05:46:36 LOG5 begin_task: Level: (2) ID = <10292> Status = 0 0 0 0 ok 2011-Dec-20 05:46:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2011-Dec-20 05:46:36 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2011-Dec-20 05:46:36 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2011-Dec-20 05:46:36 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-20 05:46:36 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-20 05:46:36 LOG5 begin_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2011-Dec-20 05:47:36 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-20 05:47:36 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2011-Dec-20 05:47:36 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-20 05:47:36 LOG5 end_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2011-Dec-20 05:47:36 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-20 05:47:36 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2011-Dec-20 05:47:36 LOG5 finish_task: Level: (2) ID = <10292> Status = 0 0 0 0 ok 2011-Dec-20 05:47:36 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2011-Dec-20 05:47:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-20 05:47:36 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2011-Dec-20 05:47:36 LOG5 end_task: Level: (2) ID = <10292> Status = 0 0 0 0 ok 2011-Dec-20 05:47:36 COMMAND run_command_line: EXECUTING command 61: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2011-Dec-20 05:47:36 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2011-Dec-20 05:47:36 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-20 05:47:36 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2011-Dec-20 05:47:36 BEGIN begin_task: Starting task 'smart frequency switching' 2011-Dec-20 05:47:36 LOG5 begin_task: Level: (2) ID = <10294> Status = 0 0 0 0 ok 2011-Dec-20 05:47:36 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2011-Dec-20 05:47:36 INFO1 smartfreq: Starting pattern: Smart frequency switching 2011-Dec-20 05:47:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2011-Dec-20 05:47:36 START begin_task: Starting task 'selecting calibration type' 2011-Dec-20 05:47:36 LOG5 begin_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2011-Dec-20 05:47:36 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-20 05:47:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-20 05:47:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 05:47:36 START begin_task: Starting task 'waiting on setcal' 2011-Dec-20 05:47:36 LOG5 begin_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2011-Dec-20 05:47:36 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-20 05:47:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 05:47:37 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:47:37 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-20 05:47:37 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-20 05:47:37 LOG5 end_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2011-Dec-20 05:47:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-20 05:47:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-20 05:47:37 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-20 05:47:37 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-20 05:47:37 LOG5 begin_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2011-Dec-20 05:47:37 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-20 05:47:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-20 05:47:37 LOG5 end_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2011-Dec-20 05:47:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-20 05:47:37 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-20 05:47:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-20 05:47:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-20 05:47:37 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-20 05:47:37 LOG5 begin_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2011-Dec-20 05:47:37 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:47:37 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-20 05:47:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-20 05:47:37 LOG5 end_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2011-Dec-20 05:47:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-20 05:47:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-20 05:47:37 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-20 05:47:37 LOG5 end_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2011-Dec-20 05:47:37 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ep 2011-Dec-20 05:47:37 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ep 2011-Dec-20 05:47:37 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ep 2011-Dec-20 05:47:37 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ep 2011-Dec-20 05:47:37 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2011-Dec-20 05:47:37 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-20 05:47:37 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2011-Dec-20 05:47:37 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-20 05:47:37 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-20 05:47:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-20 05:47:37 LOG5 begin_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2011-Dec-20 05:47:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ep' 2011-Dec-20 05:47:37 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-20 05:47:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-20 05:47:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-20 05:47:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-20 05:47:37 LOG5 end_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2011-Dec-20 05:47:37 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2011-Dec-20 05:47:37 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-20 05:47:37 LOG5 begin_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2011-Dec-20 05:47:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2011-Dec-20 05:47:37 INFO2 adjust_power: Starting to adjust WAPP power 2011-Dec-20 05:47:37 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-20 05:47:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-20 05:47:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 05:47:37 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-20 05:47:37 LOG5 begin_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2011-Dec-20 05:47:37 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-20 05:47:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-20 05:47:38 NOTE WAPPDATA-new_file: New FITS file: wapp.20111220.a2048.0007.fits 2011-Dec-20 05:47:38 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111220.a2048.0007.fits} 2011-Dec-20 05:47:39 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:47:39 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-20 05:47:39 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-20 05:47:39 LOG5 end_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2011-Dec-20 05:47:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-20 05:47:39 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-20 05:47:39 LOG5 begin_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2011-Dec-20 05:47:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-20 05:47:39 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-20 05:47:39 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-20 05:47:39 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-20 05:47:39 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-20 05:47:39 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-20 05:47:39 LOG5 begin_task: Level: (5) ID = <10303> Status = 0 0 0 0 ok 2011-Dec-20 05:47:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-20 05:47:39 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:47:39 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 8 6 dB 2011-Dec-20 05:47:39 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 3 3 dB 2011-Dec-20 05:47:39 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 3 dB 2011-Dec-20 05:47:39 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2011-Dec-20 05:47:39 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-20 05:47:39 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-20 05:47:39 LOG5 end_task: Level: (5) ID = <10303> Status = 0 0 0 0 ok 2011-Dec-20 05:47:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.910 0.899 ALFA beam 1: 0.986 1.028 2011-Dec-20 05:47:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.945 1.067 ALFA beam 3: 1.103 0.954 2011-Dec-20 05:47:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.872 0.951 ALFA beam 5: 0.970 1.122 2011-Dec-20 05:47:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.927 0.014 ALFA beam 7: 1.015 0.014 2011-Dec-20 05:47:39 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-20 05:47:39 LOG5 finish_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2011-Dec-20 05:47:39 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-20 05:47:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 05:47:40 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-20 05:47:40 LOG5 end_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2011-Dec-20 05:47:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-20 05:47:40 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-20 05:47:40 LOG5 finish_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2011-Dec-20 05:47:40 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2011-Dec-20 05:47:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-20 05:47:40 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-20 05:47:40 LOG5 end_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2011-Dec-20 05:47:40 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2011-Dec-20 05:47:40 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-20 05:47:40 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2011-Dec-20 05:47:40 LOG5 antvel: Calling 'antvel 101315.400000 230340.900000 J Topocentric 0' 2011-Dec-20 05:47:40 LOG2 antvel: Precessing RA = 10:13:15.4 Dec = +23:03:40.9 Epoch = 2011.96986 J 2011-Dec-20 05:47:40 LOG2 antvel: Computed apparent RA = 10:13:56.9 Dec = +22:59:51.9 2011-Dec-20 05:47:40 LOG2 antvel: Parameters to Doppler: Topocentric 35259 2011 354 0.0 2011-Dec-20 05:47:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-20 05:47:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2011-Dec-20 05:47:40 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2011-Dec-20 05:47:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-20 05:47:40 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-20 05:47:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-20 05:47:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 05:47:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2011-Dec-20 05:47:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-20 05:47:40 LOG5 begin_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2011-Dec-20 05:47:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-20 05:47:40 LOG5 log_alfabeam: Parameters: 10.220944444444443 23.061361111111111 11.252847 2011.9698601604684 18.999933 2011-Dec-20 05:47:40 LOG4 log_alfabeam: ALFABEAM 0 10.220944444444449 23.061361111111101 2011-Dec-20 05:47:40 LOG4 log_alfabeam: ALFABEAM 1 10.228596147646979 23.050731434193889 2011-Dec-20 05:47:40 LOG4 log_alfabeam: ALFABEAM 2 10.225022309878025 23.135475074135076 2011-Dec-20 05:47:40 LOG4 log_alfabeam: ALFABEAM 3 10.217367474493500 23.146462400162815 2011-Dec-20 05:47:40 LOG4 log_alfabeam: ALFABEAM 4 10.213288451330358 23.071673863038932 2011-Dec-20 05:47:40 LOG4 log_alfabeam: ALFABEAM 5 10.216897618689686 22.986721219633274 2011-Dec-20 05:47:40 LOG4 log_alfabeam: ALFABEAM 6 10.224550334476694 22.976765999746149 2011-Dec-20 05:47:40 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135400079 2011-Dec-20 05:47:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-20 05:47:40 LOG5 begin_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2011-Dec-20 05:47:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-20 05:47:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-20 05:47:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 05:47:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:47:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:47:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-20 05:47:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35261.00 2011-Dec-20 05:47:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-20 05:47:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2011-Dec-20 05:47:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2011-Dec-20 05:47:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2011-Dec-20 05:47:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2011-Dec-20 05:47:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:47:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:47:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:47:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:47:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:47:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.920 0.917 0.962 1.045 2011-Dec-20 05:47:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.945 1.067 1.103 0.954 2011-Dec-20 05:47:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.872 0.951 0.970 1.122 2011-Dec-20 05:47:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.927 0.014 1.015 0.014 2011-Dec-20 05:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 05:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 05:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 05:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-20 05:47:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-20 05:47:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-20 05:47:51 LOG5 end_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2011-Dec-20 05:47:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-20 05:47:51 LOG5 end_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2011-Dec-20 05:47:51 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2011-Dec-20 05:47:51 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-20 05:47:51 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2011-Dec-20 05:47:51 LOG5 antvel: Calling 'antvel 101315.400000 230340.900000 J Topocentric 0' 2011-Dec-20 05:47:51 LOG2 antvel: Precessing RA = 10:13:15.4 Dec = +23:03:40.9 Epoch = 2011.96986 J 2011-Dec-20 05:47:51 LOG2 antvel: Computed apparent RA = 10:13:56.9 Dec = +22:59:51.9 2011-Dec-20 05:47:51 LOG2 antvel: Parameters to Doppler: Topocentric 35271 2011 354 0.0 2011-Dec-20 05:47:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-20 05:47:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2011-Dec-20 05:47:51 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2011-Dec-20 05:47:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-20 05:47:51 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-20 05:47:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-20 05:47:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 05:47:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2011-Dec-20 05:47:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-20 05:47:51 LOG5 begin_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2011-Dec-20 05:47:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-20 05:47:51 LOG5 log_alfabeam: Parameters: 10.220944444444443 23.061361111111111 11.256190 2011.9698605407254 18.999933 2011-Dec-20 05:47:51 LOG4 log_alfabeam: ALFABEAM 0 10.220944444444445 23.061361111111118 2011-Dec-20 05:47:51 LOG4 log_alfabeam: ALFABEAM 1 10.228597015225979 23.050850306939964 2011-Dec-20 05:47:51 LOG4 log_alfabeam: ALFABEAM 2 10.225016238009845 23.135538961133300 2011-Dec-20 05:47:51 LOG4 log_alfabeam: ALFABEAM 3 10.217360501692303 23.146406139450129 2011-Dec-20 05:47:51 LOG4 log_alfabeam: ALFABEAM 4 10.213287625658211 23.071555647924090 2011-Dec-20 05:47:51 LOG4 log_alfabeam: ALFABEAM 5 10.216903646278704 22.986659366540739 2011-Dec-20 05:47:51 LOG4 log_alfabeam: ALFABEAM 6 10.224557155589888 22.976821084601504 2011-Dec-20 05:47:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135400080 2011-Dec-20 05:47:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-20 05:47:52 LOG5 begin_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2011-Dec-20 05:47:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-20 05:47:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-20 05:47:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 05:47:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:47:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:47:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-20 05:47:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35273.00 2011-Dec-20 05:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-20 05:47:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-20 05:47:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2011-Dec-20 05:47:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2011-Dec-20 05:47:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2011-Dec-20 05:47:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2011-Dec-20 05:47:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:47:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:47:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:47:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.185 (still bad) 2011-Dec-20 05:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.185 (still bad) 2011-Dec-20 05:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.187 (still bad) 2011-Dec-20 05:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.185 (still bad) 2011-Dec-20 05:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.185 (still bad) 2011-Dec-20 05:48:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-20 05:48:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-20 05:48:03 LOG5 end_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2011-Dec-20 05:48:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-20 05:48:03 LOG5 end_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2011-Dec-20 05:48:03 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2011-Dec-20 05:48:03 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-20 05:48:03 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2011-Dec-20 05:48:03 LOG5 antvel: Calling 'antvel 101315.400000 230340.900000 J Topocentric 0' 2011-Dec-20 05:48:03 LOG2 antvel: Precessing RA = 10:13:15.4 Dec = +23:03:40.9 Epoch = 2011.96986 J 2011-Dec-20 05:48:03 LOG2 antvel: Computed apparent RA = 10:13:56.9 Dec = +22:59:51.9 2011-Dec-20 05:48:03 LOG2 antvel: Parameters to Doppler: Topocentric 35283 2011 354 0.0 2011-Dec-20 05:48:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-20 05:48:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2011-Dec-20 05:48:03 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2011-Dec-20 05:48:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-20 05:48:03 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-20 05:48:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-20 05:48:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 05:48:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2011-Dec-20 05:48:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-20 05:48:03 LOG5 begin_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2011-Dec-20 05:48:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-20 05:48:03 LOG5 log_alfabeam: Parameters: 10.220944444444443 23.061361111111111 11.259532 2011.9698609209825 18.999933 2011-Dec-20 05:48:03 LOG4 log_alfabeam: ALFABEAM 0 10.220944444444440 23.061361111111101 2011-Dec-20 05:48:03 LOG4 log_alfabeam: ALFABEAM 1 10.228597868574527 23.050968560882851 2011-Dec-20 05:48:03 LOG4 log_alfabeam: ALFABEAM 2 10.225010193218150 23.135602414185009 2011-Dec-20 05:48:03 LOG4 log_alfabeam: ALFABEAM 3 10.217353570601071 23.146350070291568 2011-Dec-20 05:48:03 LOG4 log_alfabeam: ALFABEAM 4 10.213286813882588 23.071438048593375 2011-Dec-20 05:48:03 LOG4 log_alfabeam: ALFABEAM 5 10.216909646756088 22.986597933966678 2011-Dec-20 05:48:03 LOG4 log_alfabeam: ALFABEAM 6 10.224563936086982 22.976875980938715 2011-Dec-20 05:48:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135400081 2011-Dec-20 05:48:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-20 05:48:04 LOG5 begin_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2011-Dec-20 05:48:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-20 05:48:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-20 05:48:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 05:48:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:48:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:48:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-20 05:48:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35285.00 2011-Dec-20 05:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.185 (still bad) 2011-Dec-20 05:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-20 05:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2011-Dec-20 05:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2011-Dec-20 05:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2011-Dec-20 05:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2011-Dec-20 05:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.181 (still bad) 2011-Dec-20 05:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.182 (still bad) 2011-Dec-20 05:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.181 (still bad) 2011-Dec-20 05:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.182 (still bad) 2011-Dec-20 05:48:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-20 05:48:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-20 05:48:15 LOG5 end_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2011-Dec-20 05:48:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-20 05:48:15 LOG5 end_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2011-Dec-20 05:48:15 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2011-Dec-20 05:48:15 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-20 05:48:15 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2011-Dec-20 05:48:15 LOG5 antvel: Calling 'antvel 101315.400000 230340.900000 J Topocentric 0' 2011-Dec-20 05:48:15 LOG2 antvel: Precessing RA = 10:13:15.4 Dec = +23:03:40.9 Epoch = 2011.96986 J 2011-Dec-20 05:48:15 LOG2 antvel: Computed apparent RA = 10:13:56.9 Dec = +22:59:51.9 2011-Dec-20 05:48:15 LOG2 antvel: Parameters to Doppler: Topocentric 35295 2011 354 0.0 2011-Dec-20 05:48:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-20 05:48:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2011-Dec-20 05:48:15 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2011-Dec-20 05:48:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-20 05:48:15 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-20 05:48:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-20 05:48:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 05:48:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2011-Dec-20 05:48:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-20 05:48:15 LOG5 begin_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2011-Dec-20 05:48:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-20 05:48:15 LOG5 log_alfabeam: Parameters: 10.220944444444443 23.061361111111111 11.262875 2011.9698613012395 18.999933 2011-Dec-20 05:48:15 LOG4 log_alfabeam: ALFABEAM 0 10.220944444444449 23.061361111111108 2011-Dec-20 05:48:15 LOG4 log_alfabeam: ALFABEAM 1 10.228598708383618 23.051086271540189 2011-Dec-20 05:48:15 LOG4 log_alfabeam: ALFABEAM 2 10.225004171711113 23.135665475331166 2011-Dec-20 05:48:15 LOG4 log_alfabeam: ALFABEAM 3 10.217346676712413 23.146294158411184 2011-Dec-20 05:48:15 LOG4 log_alfabeam: ALFABEAM 4 10.213286015340746 23.071320989934577 2011-Dec-20 05:48:15 LOG4 log_alfabeam: ALFABEAM 5 10.216915623890285 22.986536881190656 2011-Dec-20 05:48:15 LOG4 log_alfabeam: ALFABEAM 6 10.224570680375411 22.976930722348101 2011-Dec-20 05:48:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135400082 2011-Dec-20 05:48:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-20 05:48:16 LOG5 begin_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2011-Dec-20 05:48:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-20 05:48:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-20 05:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.184 (still bad) 2011-Dec-20 05:48:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 05:48:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:48:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:48:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-20 05:48:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35297.00 2011-Dec-20 05:48:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-20 05:48:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2011-Dec-20 05:48:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2011-Dec-20 05:48:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2011-Dec-20 05:48:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2011-Dec-20 05:48:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:48:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:48:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:48:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.172 (still bad) 2011-Dec-20 05:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.172 (still bad) 2011-Dec-20 05:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.173 (still bad) 2011-Dec-20 05:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.173 (still bad) 2011-Dec-20 05:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.172 (still bad) 2011-Dec-20 05:48:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-20 05:48:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-20 05:48:27 LOG5 end_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2011-Dec-20 05:48:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-20 05:48:27 LOG5 end_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2011-Dec-20 05:48:27 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2011-Dec-20 05:48:27 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-20 05:48:27 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2011-Dec-20 05:48:27 LOG5 antvel: Calling 'antvel 101315.400000 230340.900000 J Topocentric 0' 2011-Dec-20 05:48:27 LOG2 antvel: Precessing RA = 10:13:15.4 Dec = +23:03:40.9 Epoch = 2011.96986 J 2011-Dec-20 05:48:27 LOG2 antvel: Computed apparent RA = 10:13:56.9 Dec = +22:59:51.9 2011-Dec-20 05:48:27 LOG2 antvel: Parameters to Doppler: Topocentric 35307 2011 354 0.0 2011-Dec-20 05:48:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-20 05:48:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2011-Dec-20 05:48:27 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2011-Dec-20 05:48:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-20 05:48:27 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-20 05:48:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-20 05:48:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 05:48:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2011-Dec-20 05:48:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-20 05:48:27 LOG5 begin_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2011-Dec-20 05:48:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-20 05:48:27 LOG5 log_alfabeam: Parameters: 10.220944444444443 23.061361111111111 11.266217 2011.9698616814967 18.999933 2011-Dec-20 05:48:27 LOG4 log_alfabeam: ALFABEAM 0 10.220944444444447 23.061361111111101 2011-Dec-20 05:48:27 LOG4 log_alfabeam: ALFABEAM 1 10.228599534328325 23.051203373189335 2011-Dec-20 05:48:27 LOG4 log_alfabeam: ALFABEAM 2 10.224998176918232 23.135728110860487 2011-Dec-20 05:48:27 LOG4 log_alfabeam: ALFABEAM 3 10.217339823795408 23.146238436535423 2011-Dec-20 05:48:27 LOG4 log_alfabeam: ALFABEAM 4 10.213285230336199 23.071204537293760 2011-Dec-20 05:48:27 LOG4 log_alfabeam: ALFABEAM 5 10.216921574281395 22.986476240832467 2011-Dec-20 05:48:27 LOG4 log_alfabeam: ALFABEAM 6 10.224577384765849 22.976985276818979 2011-Dec-20 05:48:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135400083 2011-Dec-20 05:48:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-20 05:48:28 LOG5 begin_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2011-Dec-20 05:48:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-20 05:48:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-20 05:48:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 05:48:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:48:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.173 (still bad) 2011-Dec-20 05:48:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-20 05:48:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35309.00 2011-Dec-20 05:48:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-20 05:48:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2011-Dec-20 05:48:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2011-Dec-20 05:48:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2011-Dec-20 05:48:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2011-Dec-20 05:48:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:48:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:48:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:48:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 05:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 05:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 05:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-20 05:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-20 05:48:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-20 05:48:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-20 05:48:39 LOG5 end_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2011-Dec-20 05:48:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-20 05:48:39 LOG5 end_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2011-Dec-20 05:48:39 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2011-Dec-20 05:48:39 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-20 05:48:39 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2011-Dec-20 05:48:39 LOG5 antvel: Calling 'antvel 101315.400000 230340.900000 J Topocentric 0' 2011-Dec-20 05:48:39 LOG2 antvel: Precessing RA = 10:13:15.4 Dec = +23:03:40.9 Epoch = 2011.96986 J 2011-Dec-20 05:48:39 LOG2 antvel: Computed apparent RA = 10:13:56.9 Dec = +22:59:51.9 2011-Dec-20 05:48:39 LOG2 antvel: Parameters to Doppler: Topocentric 35319 2011 354 0.0 2011-Dec-20 05:48:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-20 05:48:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2011-Dec-20 05:48:39 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2011-Dec-20 05:48:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-20 05:48:39 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-20 05:48:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-20 05:48:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 05:48:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2011-Dec-20 05:48:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-20 05:48:39 LOG5 begin_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2011-Dec-20 05:48:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-20 05:48:39 LOG5 log_alfabeam: Parameters: 10.220944444444443 23.061361111111111 11.269560 2011.9698620617537 18.999933 2011-Dec-20 05:48:39 LOG4 log_alfabeam: ALFABEAM 0 10.220944444444449 23.061361111111125 2011-Dec-20 05:48:39 LOG4 log_alfabeam: ALFABEAM 1 10.228600347077867 23.051319940563392 2011-Dec-20 05:48:39 LOG4 log_alfabeam: ALFABEAM 2 10.224992205080243 23.135790362224938 2011-Dec-20 05:48:39 LOG4 log_alfabeam: ALFABEAM 3 10.217333007397619 23.146182870591780 2011-Dec-20 05:48:39 LOG4 log_alfabeam: ALFABEAM 4 10.213284458227522 23.071088616339829 2011-Dec-20 05:48:39 LOG4 log_alfabeam: ALFABEAM 5 10.216927501665101 22.986415972743163 2011-Dec-20 05:48:39 LOG4 log_alfabeam: ALFABEAM 6 10.224584053612237 22.977039677740020 2011-Dec-20 05:48:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135400084 2011-Dec-20 05:48:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-20 05:48:40 LOG5 begin_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2011-Dec-20 05:48:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-20 05:48:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-20 05:48:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 05:48:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:48:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:48:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-20 05:48:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35321.00 2011-Dec-20 05:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-20 05:48:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-20 05:48:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2011-Dec-20 05:48:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2011-Dec-20 05:48:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2011-Dec-20 05:48:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2011-Dec-20 05:48:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:48:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:48:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:48:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:48:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:48:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.914 0.909 0.992 1.035 2011-Dec-20 05:48:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 1.076 1.121 0.964 2011-Dec-20 05:48:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.880 0.961 0.981 1.146 2011-Dec-20 05:48:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.014 1.017 0.014 2011-Dec-20 05:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-20 05:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 05:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 05:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-20 05:48:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-20 05:48:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-20 05:48:51 LOG5 end_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2011-Dec-20 05:48:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-20 05:48:51 LOG5 end_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2011-Dec-20 05:48:51 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2011-Dec-20 05:48:51 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-20 05:48:51 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2011-Dec-20 05:48:51 LOG5 antvel: Calling 'antvel 101315.400000 230340.900000 J Topocentric 0' 2011-Dec-20 05:48:51 LOG2 antvel: Precessing RA = 10:13:15.4 Dec = +23:03:40.9 Epoch = 2011.96986 J 2011-Dec-20 05:48:51 LOG2 antvel: Computed apparent RA = 10:13:56.9 Dec = +22:59:51.9 2011-Dec-20 05:48:51 LOG2 antvel: Parameters to Doppler: Topocentric 35331 2011 354 0.0 2011-Dec-20 05:48:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-20 05:48:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2011-Dec-20 05:48:51 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2011-Dec-20 05:48:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-20 05:48:51 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-20 05:48:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-20 05:48:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 05:48:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2011-Dec-20 05:48:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-20 05:48:51 LOG5 begin_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2011-Dec-20 05:48:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-20 05:48:51 LOG5 log_alfabeam: Parameters: 10.220944444444443 23.061361111111111 11.272902 2011.9698624420107 18.999933 2011-Dec-20 05:48:51 LOG4 log_alfabeam: ALFABEAM 0 10.220944444444445 23.061361111111125 2011-Dec-20 05:48:51 LOG4 log_alfabeam: ALFABEAM 1 10.228601146318226 23.051435908529992 2011-Dec-20 05:48:51 LOG4 log_alfabeam: ALFABEAM 2 10.224986259599561 23.135852196099471 2011-Dec-20 05:48:51 LOG4 log_alfabeam: ALFABEAM 3 10.217326231249835 23.146127493095818 2011-Dec-20 05:48:51 LOG4 log_alfabeam: ALFABEAM 4 10.213283699307635 23.070973291832015 2011-Dec-20 05:48:51 LOG4 log_alfabeam: ALFABEAM 5 10.216933402668504 22.986356109169058 2011-Dec-20 05:48:51 LOG4 log_alfabeam: ALFABEAM 6 10.224590683262548 22.977093893306879 2011-Dec-20 05:48:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135400085 2011-Dec-20 05:48:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-20 05:48:52 LOG5 begin_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2011-Dec-20 05:48:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-20 05:48:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-20 05:48:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 05:48:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:48:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:48:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-20 05:48:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35333.00 2011-Dec-20 05:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-20 05:48:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-20 05:48:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2011-Dec-20 05:48:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2011-Dec-20 05:48:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2011-Dec-20 05:48:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2011-Dec-20 05:48:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:48:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:48:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:48:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-20 05:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-20 05:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-20 05:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-20 05:49:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-20 05:49:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-20 05:49:03 LOG5 end_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2011-Dec-20 05:49:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-20 05:49:03 LOG5 end_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2011-Dec-20 05:49:03 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2011-Dec-20 05:49:03 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-20 05:49:03 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-20 05:49:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-20 05:49:03 LOG5 begin_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2011-Dec-20 05:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-20 05:49:03 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-20 05:49:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-20 05:49:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-20 05:49:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-20 05:49:03 LOG5 end_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2011-Dec-20 05:49:03 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2011-Dec-20 05:49:03 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2011-Dec-20 05:49:03 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2011-Dec-20 05:49:03 LOG5 antvel: Calling 'antvel 101315.400000 230340.900000 J Topocentric 0' 2011-Dec-20 05:49:03 LOG2 antvel: Precessing RA = 10:13:15.4 Dec = +23:03:40.9 Epoch = 2011.96986 J 2011-Dec-20 05:49:03 LOG2 antvel: Computed apparent RA = 10:13:56.9 Dec = +22:59:51.9 2011-Dec-20 05:49:03 LOG2 antvel: Parameters to Doppler: Topocentric 35343 2011 354 0.0 2011-Dec-20 05:49:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-20 05:49:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2011-Dec-20 05:49:03 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2011-Dec-20 05:49:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-20 05:49:03 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-20 05:49:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-20 05:49:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 05:49:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2011-Dec-20 05:49:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-20 05:49:03 LOG5 begin_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2011-Dec-20 05:49:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2011-Dec-20 05:49:03 LOG5 log_alfabeam: Parameters: 10.220944444444443 23.061361111111111 11.276245 2011.9698628222677 18.999933 2011-Dec-20 05:49:03 LOG4 log_alfabeam: ALFABEAM 0 10.220944444444445 23.061361111111125 2011-Dec-20 05:49:03 LOG4 log_alfabeam: ALFABEAM 1 10.228601932697428 23.051551351050957 2011-Dec-20 05:49:03 LOG4 log_alfabeam: ALFABEAM 2 10.224980336749054 23.135913653359523 2011-Dec-20 05:49:03 LOG4 log_alfabeam: ALFABEAM 3 10.217319490953496 23.146072270177548 2011-Dec-20 05:49:03 LOG4 log_alfabeam: ALFABEAM 4 10.213282952955831 23.070858490207101 2011-Dec-20 05:49:03 LOG4 log_alfabeam: ALFABEAM 5 10.216939280994993 22.986296610520608 2011-Dec-20 05:49:03 LOG4 log_alfabeam: ALFABEAM 6 10.224597278018255 22.977147956707757 2011-Dec-20 05:49:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135400086 2011-Dec-20 05:49:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-20 05:49:04 LOG5 begin_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2011-Dec-20 05:49:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-20 05:49:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-20 05:49:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 05:49:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:49:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:49:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2011-Dec-20 05:49:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35345.00 2011-Dec-20 05:49:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-20 05:49:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2011-Dec-20 05:49:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2011-Dec-20 05:49:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2011-Dec-20 05:49:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2011-Dec-20 05:49:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:49:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:49:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:49:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.387 (still bad) 2011-Dec-20 05:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.582 (still bad) 2011-Dec-20 05:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.586 (still bad) 2011-Dec-20 05:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.588 (still bad) 2011-Dec-20 05:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.584 (still bad) 2011-Dec-20 05:49:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-20 05:49:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-20 05:49:15 LOG5 end_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2011-Dec-20 05:49:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-20 05:49:15 LOG5 end_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2011-Dec-20 05:49:15 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2011-Dec-20 05:49:15 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2011-Dec-20 05:49:15 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2011-Dec-20 05:49:15 LOG5 antvel: Calling 'antvel 101315.400000 230340.900000 J Topocentric 0' 2011-Dec-20 05:49:15 LOG2 antvel: Precessing RA = 10:13:15.4 Dec = +23:03:40.9 Epoch = 2011.96986 J 2011-Dec-20 05:49:15 LOG2 antvel: Computed apparent RA = 10:13:56.9 Dec = +22:59:51.9 2011-Dec-20 05:49:15 LOG2 antvel: Parameters to Doppler: Topocentric 35355 2011 354 0.0 2011-Dec-20 05:49:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-20 05:49:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2011-Dec-20 05:49:15 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2011-Dec-20 05:49:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-20 05:49:15 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-20 05:49:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-20 05:49:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 05:49:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2011-Dec-20 05:49:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-20 05:49:15 LOG5 begin_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2011-Dec-20 05:49:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2011-Dec-20 05:49:15 LOG5 log_alfabeam: Parameters: 10.220944444444443 23.061361111111111 11.279587 2011.9698632025247 18.999933 2011-Dec-20 05:49:15 LOG4 log_alfabeam: ALFABEAM 0 10.220944444444447 23.061361111111118 2011-Dec-20 05:49:15 LOG4 log_alfabeam: ALFABEAM 1 10.228602705912138 23.051666203575241 2011-Dec-20 05:49:15 LOG4 log_alfabeam: ALFABEAM 2 10.224974439904425 23.135974701059780 2011-Dec-20 05:49:15 LOG4 log_alfabeam: ALFABEAM 3 10.217312790201714 23.146017234144026 2011-Dec-20 05:49:15 LOG4 log_alfabeam: ALFABEAM 4 10.213282219454648 23.070744275646323 2011-Dec-20 05:49:15 LOG4 log_alfabeam: ALFABEAM 5 10.216945133298310 22.986237508676986 2011-Dec-20 05:49:15 LOG4 log_alfabeam: ALFABEAM 6 10.224603834264039 22.977201836342218 2011-Dec-20 05:49:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135400087 2011-Dec-20 05:49:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-20 05:49:16 LOG5 begin_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2011-Dec-20 05:49:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-20 05:49:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-20 05:49:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 05:49:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:49:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:49:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2011-Dec-20 05:49:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35357.00 2011-Dec-20 05:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.581 (still bad) 2011-Dec-20 05:49:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-20 05:49:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2011-Dec-20 05:49:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2011-Dec-20 05:49:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2011-Dec-20 05:49:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2011-Dec-20 05:49:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:49:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:49:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:49:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.636 (still bad) 2011-Dec-20 05:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.642 (still bad) 2011-Dec-20 05:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.640 (still bad) 2011-Dec-20 05:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.640 (still bad) 2011-Dec-20 05:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.637 (still bad) 2011-Dec-20 05:49:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-20 05:49:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-20 05:49:27 LOG5 end_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2011-Dec-20 05:49:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-20 05:49:27 LOG5 end_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2011-Dec-20 05:49:27 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2011-Dec-20 05:49:27 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2011-Dec-20 05:49:27 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2011-Dec-20 05:49:27 LOG5 antvel: Calling 'antvel 101315.400000 230340.900000 J Topocentric 0' 2011-Dec-20 05:49:27 LOG2 antvel: Precessing RA = 10:13:15.4 Dec = +23:03:40.9 Epoch = 2011.96986 J 2011-Dec-20 05:49:27 LOG2 antvel: Computed apparent RA = 10:13:56.9 Dec = +22:59:51.9 2011-Dec-20 05:49:27 LOG2 antvel: Parameters to Doppler: Topocentric 35367 2011 354 0.0 2011-Dec-20 05:49:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-20 05:49:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2011-Dec-20 05:49:27 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2011-Dec-20 05:49:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-20 05:49:27 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-20 05:49:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-20 05:49:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 05:49:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2011-Dec-20 05:49:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-20 05:49:27 LOG5 begin_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2011-Dec-20 05:49:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2011-Dec-20 05:49:27 LOG5 log_alfabeam: Parameters: 10.220944444444443 23.061361111111111 11.282930 2011.969863582782 18.999933 2011-Dec-20 05:49:27 LOG4 log_alfabeam: ALFABEAM 0 10.220944444444445 23.061361111111108 2011-Dec-20 05:49:27 LOG4 log_alfabeam: ALFABEAM 1 10.228603466589767 23.051780539306485 2011-Dec-20 05:49:27 LOG4 log_alfabeam: ALFABEAM 2 10.224968565370229 23.136035379511135 2011-Dec-20 05:49:27 LOG4 log_alfabeam: ALFABEAM 3 10.217306124648781 23.145962351326730 2011-Dec-20 05:49:27 LOG4 log_alfabeam: ALFABEAM 4 10.213281498203541 23.070630575341358 2011-Dec-20 05:49:27 LOG4 log_alfabeam: ALFABEAM 5 10.216950963249960 22.986178764596399 2011-Dec-20 05:49:27 LOG4 log_alfabeam: ALFABEAM 6 10.224610356249920 22.977255565199094 2011-Dec-20 05:49:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135400088 2011-Dec-20 05:49:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-20 05:49:28 LOG5 begin_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2011-Dec-20 05:49:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-20 05:49:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-20 05:49:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 05:49:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:49:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:49:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2011-Dec-20 05:49:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35369.00 2011-Dec-20 05:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.636 (still bad) 2011-Dec-20 05:49:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-20 05:49:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2011-Dec-20 05:49:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2011-Dec-20 05:49:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2011-Dec-20 05:49:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2011-Dec-20 05:49:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:49:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:49:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:49:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.633 (still bad) 2011-Dec-20 05:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.629 (still bad) 2011-Dec-20 05:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.633 (still bad) 2011-Dec-20 05:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.632 (still bad) 2011-Dec-20 05:49:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-20 05:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.630 (still bad) 2011-Dec-20 05:49:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-20 05:49:39 LOG5 end_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2011-Dec-20 05:49:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-20 05:49:39 LOG5 end_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2011-Dec-20 05:49:39 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2011-Dec-20 05:49:39 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2011-Dec-20 05:49:39 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2011-Dec-20 05:49:39 LOG5 antvel: Calling 'antvel 101315.400000 230340.900000 J Topocentric 0' 2011-Dec-20 05:49:39 LOG2 antvel: Precessing RA = 10:13:15.4 Dec = +23:03:40.9 Epoch = 2011.96986 J 2011-Dec-20 05:49:39 LOG2 antvel: Computed apparent RA = 10:13:56.9 Dec = +22:59:51.9 2011-Dec-20 05:49:39 LOG2 antvel: Parameters to Doppler: Topocentric 35379 2011 354 0.0 2011-Dec-20 05:49:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-20 05:49:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2011-Dec-20 05:49:39 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2011-Dec-20 05:49:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-20 05:49:39 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-20 05:49:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-20 05:49:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 05:49:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2011-Dec-20 05:49:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-20 05:49:39 LOG5 begin_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2011-Dec-20 05:49:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2011-Dec-20 05:49:39 LOG5 log_alfabeam: Parameters: 10.220944444444443 23.061361111111111 11.286272 2011.969863963039 18.999933 2011-Dec-20 05:49:39 LOG4 log_alfabeam: ALFABEAM 0 10.220944444444445 23.061361111111111 2011-Dec-20 05:49:39 LOG4 log_alfabeam: ALFABEAM 1 10.228604214437425 23.051894294266209 2011-Dec-20 05:49:39 LOG4 log_alfabeam: ALFABEAM 2 10.224962716495840 23.136095656141595 2011-Dec-20 05:49:39 LOG4 log_alfabeam: ALFABEAM 3 10.217299497950725 23.145907653826644 2011-Dec-20 05:49:39 LOG4 log_alfabeam: ALFABEAM 4 10.213280789474894 23.070517452904127 2011-Dec-20 05:49:39 LOG4 log_alfabeam: ALFABEAM 5 10.216956767529949 22.986120409797007 2011-Dec-20 05:49:39 LOG4 log_alfabeam: ALFABEAM 6 10.224616840396688 22.977309111879517 2011-Dec-20 05:49:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135400089 2011-Dec-20 05:49:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-20 05:49:40 LOG5 begin_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2011-Dec-20 05:49:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-20 05:49:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-20 05:49:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 05:49:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:49:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:49:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2011-Dec-20 05:49:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35381.00 2011-Dec-20 05:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.630 (still bad) 2011-Dec-20 05:49:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-20 05:49:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2011-Dec-20 05:49:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2011-Dec-20 05:49:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2011-Dec-20 05:49:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2011-Dec-20 05:49:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:49:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:49:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:49:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.610 (still bad) 2011-Dec-20 05:49:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-20 05:49:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.320 1.274 1.344 1.403 2011-Dec-20 05:49:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.344 1.510 1.609 1.341 2011-Dec-20 05:49:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.130 1.369 1.418 1.583 2011-Dec-20 05:49:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.331 0.014 1.454 0.014 2011-Dec-20 05:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.607 (still bad) 2011-Dec-20 05:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.610 (still bad) 2011-Dec-20 05:49:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-20 05:49:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-20 05:49:51 LOG5 end_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2011-Dec-20 05:49:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-20 05:49:51 LOG5 end_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2011-Dec-20 05:49:51 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2011-Dec-20 05:49:51 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2011-Dec-20 05:49:51 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2011-Dec-20 05:49:51 LOG5 antvel: Calling 'antvel 101315.400000 230340.900000 J Topocentric 0' 2011-Dec-20 05:49:51 LOG2 antvel: Precessing RA = 10:13:15.4 Dec = +23:03:40.9 Epoch = 2011.96986 J 2011-Dec-20 05:49:51 LOG2 antvel: Computed apparent RA = 10:13:56.9 Dec = +22:59:51.9 2011-Dec-20 05:49:51 LOG2 antvel: Parameters to Doppler: Topocentric 35391 2011 354 0.0 2011-Dec-20 05:49:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-20 05:49:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2011-Dec-20 05:49:51 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2011-Dec-20 05:49:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-20 05:49:51 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-20 05:49:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-20 05:49:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 05:49:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2011-Dec-20 05:49:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-20 05:49:51 LOG5 begin_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2011-Dec-20 05:49:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2011-Dec-20 05:49:51 LOG5 log_alfabeam: Parameters: 10.220944444444443 23.061361111111111 11.289614 2011.969864343296 18.999933 2011-Dec-20 05:49:51 LOG4 log_alfabeam: ALFABEAM 0 10.220944444444442 23.061361111111108 2011-Dec-20 05:49:51 LOG4 log_alfabeam: ALFABEAM 1 10.228604949844279 23.052007507117509 2011-Dec-20 05:49:51 LOG4 log_alfabeam: ALFABEAM 2 10.224956891356539 23.136155552843263 2011-Dec-20 05:49:51 LOG4 log_alfabeam: ALFABEAM 3 10.217292907780177 23.145853124466825 2011-Dec-20 05:49:51 LOG4 log_alfabeam: ALFABEAM 4 10.213280092894397 23.070404869875507 2011-Dec-20 05:49:51 LOG4 log_alfabeam: ALFABEAM 5 10.216962548052267 22.986062423069459 2011-Dec-20 05:49:51 LOG4 log_alfabeam: ALFABEAM 6 10.224623288979615 22.977362493225957 2011-Dec-20 05:49:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135400090 2011-Dec-20 05:49:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-20 05:49:52 LOG5 begin_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2011-Dec-20 05:49:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-20 05:49:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-20 05:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.609 (still bad) 2011-Dec-20 05:49:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-20 05:49:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:49:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-20 05:49:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2011-Dec-20 05:49:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35393.00 2011-Dec-20 05:49:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-20 05:49:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2011-Dec-20 05:49:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2011-Dec-20 05:49:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2011-Dec-20 05:49:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2011-Dec-20 05:49:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:49:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1822.996955 MHz 2011-Dec-20 05:49:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:49:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2133.983982 MHz 2011-Dec-20 05:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.559 (still bad) 2011-Dec-20 05:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.561 (still bad) 2011-Dec-20 05:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.561 (still bad) 2011-Dec-20 05:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.559 (still bad) 2011-Dec-20 05:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.559 (still bad) 2011-Dec-20 05:50:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-20 05:50:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-20 05:50:03 LOG5 end_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2011-Dec-20 05:50:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-20 05:50:03 LOG5 end_task: Level: (3) ID = <1