2011-Dec-19 01:48:25 BEGIN executive: CIMA executive starting ... 2011-Dec-19 01:48:25 NOTE executive: STARTING NEW CIMA SESSION 2011-Dec-19 01:48:25 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2011-Dec-19 01:48:25 INFO4 executive: This is an ON-LINE session 2011-Dec-19 01:48:25 INFO4 executive: This is a LOCAL session 2011-Dec-19 01:48:25 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2011-Dec-19 01:48:25 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'Edwin' 2011-Dec-19 01:48:25 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20111219' 2011-Dec-19 01:48:25 LOG2 log_preferences: Currently applied preferences: 2011-Dec-19 01:48:25 LOG2 log_preferences: prefs(dailylog) = daily 2011-Dec-19 01:48:25 LOG2 log_preferences: prefs(offlinelog) = skip 2011-Dec-19 01:48:25 LOG2 log_preferences: prefs(datawindow) = ignore 2011-Dec-19 01:48:25 LOG2 log_preferences: prefs(limitwarning) = enabled 2011-Dec-19 01:48:25 LOG2 log_preferences: prefs(wappfailure) = abort 2011-Dec-19 01:48:25 LOG2 log_preferences: prefs(helpstyle) = stay-open 2011-Dec-19 01:48:25 LOG2 log_preferences: prefs(logcolours) = full 2011-Dec-19 01:48:25 LOG2 log_preferences: prefs(displaylevel) = INFO3 2011-Dec-19 01:48:25 LOG2 log_preferences: prefs(loglevel) = LOG5 2011-Dec-19 01:48:25 LOG2 log_preferences: prefs(displayformat) = short 2011-Dec-19 01:48:25 LOG2 log_preferences: prefs(logformat) = new 2011-Dec-19 01:48:25 LOG2 log_preferences: prefs(fontsize) = 4 2011-Dec-19 01:48:25 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2011-Dec-19 01:48:25 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2011-Dec-19 01:48:25 ALERT executive: CIMA executive ready 2011-Dec-19 01:48:27 NOTE frontend: CIMA frontend ready 2011-Dec-19 01:48:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:48:28 LOG4 got_cormsg: From DATATAKING: setup 2011-Dec-19 01:48:33 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2011-Dec-19 01:48:33 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2011-Dec-19 01:48:33 LOG4 got_cormsg: From DATATAKING: vw% io 2011-Dec-19 01:48:33 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2011-Dec-19 01:48:33 LOG4 got_cormsg: From DATATAKING: 2011-Dec-19 01:48:33 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:48:33 LOG4 got_cormsg: From DATATAKING: tape stat 2011-Dec-19 01:48:33 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2011-Dec-19 01:48:33 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2011-Dec-19 01:48:33 LOG4 got_cormsg: From DATATAKING: vw% connectall 2011-Dec-19 01:48:33 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2011-Dec-19 01:48:33 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2011-Dec-19 01:48:33 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2011-Dec-19 01:48:33 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2011-Dec-19 01:48:33 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2011-Dec-19 01:48:34 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2011-Dec-19 01:48:34 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2011-Dec-19 01:48:34 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2011-Dec-19 01:48:34 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2011-Dec-19 01:48:34 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:48:34 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:49:12 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2011-Dec-19 01:49:12 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2011-Dec-19 01:49:12 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2011-Dec-19 01:49:12 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2011-Dec-19 01:49:12 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Dec-19 01:49:12 NOTE select_receiver: Starting to select receiver ALFA 2011-Dec-19 01:49:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2011-Dec-19 01:49:12 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2011-Dec-19 01:49:12 LOG3 vw_send: To DATATAKING: acvlbical off 2011-Dec-19 01:49:12 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2011-Dec-19 01:49:12 STOP finish_task: Finishing task 'selecting receiver ALFA' 2011-Dec-19 01:49:12 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Dec-19 01:49:12 DONE finish_task: DONE finished selecting: receiver ALFA 2011-Dec-19 01:49:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-19 01:49:12 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2011-Dec-19 01:49:12 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Dec-19 01:49:12 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2011-Dec-19 01:49:12 LOG4 got_cormsg: From DATATAKING: acvlbical off 2011-Dec-19 01:49:19 LOG4 got_cormsg: From DATATAKING: waiting for turret position:26.64 2011-Dec-19 01:50:36 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima31.cmd' (at lines 1 - 24) 2011-Dec-19 01:50:36 INFO4 CIMA-load_command_file: Loaded command file '111219Night.cmd' 2011-Dec-19 01:50:44 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:50:44 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:50:59 INFO1 CIMA-run_command_file: Transferring command file '111219Night.cmd' to executive ... 2011-Dec-19 01:50:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_cima31.conf} 2011-Dec-19 01:50:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2011-Dec-19 01:50:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2011-Dec-19 01:50:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2011-Dec-19 01:50:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2011-Dec-19 01:51:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2011-Dec-19 01:51:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2011-Dec-19 01:51:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2011-Dec-19 01:51:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2011-Dec-19 01:51:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2011-Dec-19 01:51:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2011-Dec-19 01:51:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2011-Dec-19 01:51:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2011-Dec-19 01:51:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 28 {LOAD ages_mock.conf} 2011-Dec-19 01:51:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 29 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2011-Dec-19 01:51:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 30 {CATALOG AGESFull.cat} 2011-Dec-19 01:51:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 33 {IF LSTSLEW(AGES33PP_p2_137) < 003341 THEN} 2011-Dec-19 01:51:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 34 {FIXEDDRIFT az=224.29 alfaangle=-25.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p2_137 ra=12400.00 dec=291600.00} 2011-Dec-19 01:51:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 37 {ENDIF} 2011-Dec-19 01:51:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 40 {IF LSTSLEW(AGES33PP_p3_020) < 005641 THEN} 2011-Dec-19 01:51:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 41 {FIXEDDRIFT az=203.04 alfaangle=-3.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_020 ra=12400.00 dec=321130.00} 2011-Dec-19 01:51:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 44 {ENDIF} 2011-Dec-19 01:51:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 47 {IF LSTSLEW(AGES33PP_p3_022) < 011941 THEN} 2011-Dec-19 01:51:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 48 {FIXEDDRIFT az=184.41 alfaangle=14.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_022 ra=12400.00 dec=320830.00} 2011-Dec-19 01:51:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 51 {ENDIF} 2011-Dec-19 01:51:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 26 54 {IF LSTSLEW(AGES33PP_p3_024) < 014241 THEN} 2011-Dec-19 01:51:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 27 55 {FIXEDDRIFT az=164.49 alfaangle=34.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_024 ra=12400.00 dec=320530.00} 2011-Dec-19 01:51:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 28 58 {ENDIF} 2011-Dec-19 01:51:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 29 61 {IF LSTSLEW(AGES33PP_p2_135) < 020541 THEN} 2011-Dec-19 01:51:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 30 62 {FIXEDDRIFT az=141.61 alfaangle=57.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p2_135 ra=12400.00 dec=291900.00} 2011-Dec-19 01:51:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 31 65 {ENDIF} 2011-Dec-19 01:51:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 32 68 {IF LSTSLEW(AGES33PP_p2_133) < 022741 THEN} 2011-Dec-19 01:51:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 33 69 {FIXEDDRIFT az=130.58 alfaangle=70.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p2_133 ra=12400.00 dec=292200.00} 2011-Dec-19 01:51:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 34 72 {ENDIF} 2011-Dec-19 01:51:00 COMMAND CIMA-send_to_exec: Sending command to run command file 2011-Dec-19 01:51:00 LOG4 exec_msg: From OBSERVER: run_command_file 111219Night.cmd 1 1 34 2011-Dec-19 01:51:00 LOG4 run_command_file: Calling 'run_command_file 111219Night.cmd 1 1 34' 2011-Dec-19 01:51:00 BEGIN begin_task: Starting task 'running command file '111219Night.cmd'' 2011-Dec-19 01:51:00 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2011-Dec-19 01:51:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '111219Night.cmd' ...} 2011-Dec-19 01:51:00 NOTE run_command_file: Starting execution of command file '111219Night.cmd' from line 1 2011-Dec-19 01:51:00 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_cima31.conf' 2011-Dec-19 01:51:00 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2011-Dec-19 01:51:00 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-19 01:51:00 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2011-Dec-19 01:51:00 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima31.conf' 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2011-Dec-19 01:51:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2011-Dec-19 01:51:02 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-19 01:51:02 BEGIN begin_task: Starting task 'configuring IF/LO path' 2011-Dec-19 01:51:02 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Dec-19 01:51:02 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2011-Dec-19 01:51:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2011-Dec-19 01:51:02 INFO1 config_iflo: Selecting receiver ALFA 2011-Dec-19 01:51:02 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2011-Dec-19 01:51:03 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2011-Dec-19 01:51:03 START begin_task: Starting task 'selecting receiver ALFA' 2011-Dec-19 01:51:03 LOG5 begin_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Dec-19 01:51:03 NOTE select_receiver: Starting to select receiver ALFA 2011-Dec-19 01:51:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2011-Dec-19 01:51:03 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2011-Dec-19 01:51:03 LOG3 vw_send: To DATATAKING: acvlbical off 2011-Dec-19 01:51:03 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2011-Dec-19 01:51:03 STOP finish_task: Finishing task 'selecting receiver ALFA' 2011-Dec-19 01:51:03 LOG5 finish_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Dec-19 01:51:03 INFO2 finish_task: DONE finished selecting: receiver ALFA 2011-Dec-19 01:51:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 01:51:03 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2011-Dec-19 01:51:03 LOG5 end_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Dec-19 01:51:03 START begin_task: Starting task 'waiting for receiver ALFA' 2011-Dec-19 01:51:03 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2011-Dec-19 01:51:03 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2011-Dec-19 01:51:03 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2011-Dec-19 01:51:03 INFO1 config_iflo: Configuring rest of the IF/LO path 2011-Dec-19 01:51:03 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2011-Dec-19 01:51:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-19 01:51:03 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-19 01:51:03 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-19 01:51:03 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2011-Dec-19 01:51:03 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-19 01:51:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-19 01:51:03 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2011-Dec-19 01:51:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-19 01:51:03 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-19 01:51:03 LOG3 vw_send: To DATATAKING: alfafb 1 2011-Dec-19 01:51:03 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2011-Dec-19 01:51:03 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2011-Dec-19 01:51:03 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2011-Dec-19 01:51:03 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2011-Dec-19 01:51:03 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2011-Dec-19 01:51:03 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2011-Dec-19 01:51:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2011-Dec-19 01:51:03 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2011-Dec-19 01:51:03 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2011-Dec-19 01:51:03 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2011-Dec-19 01:51:03 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2011-Dec-19 01:51:03 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2011-Dec-19 01:51:03 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2011-Dec-19 01:51:03 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2011-Dec-19 01:51:03 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2011-Dec-19 01:51:03 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2011-Dec-19 01:51:03 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2011-Dec-19 01:51:03 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2011-Dec-19 01:51:03 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2011-Dec-19 01:51:03 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2011-Dec-19 01:51:03 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2011-Dec-19 01:51:03 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2011-Dec-19 01:51:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 01:51:03 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2011-Dec-19 01:51:03 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2011-Dec-19 01:51:03 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2011-Dec-19 01:51:03 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2011-Dec-19 01:51:03 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2011-Dec-19 01:51:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2011-Dec-19 01:51:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 01:51:03 START begin_task: Starting task 'waiting on configuring IF/LO path' 2011-Dec-19 01:51:03 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2011-Dec-19 01:51:03 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2011-Dec-19 01:51:03 LOG4 got_cormsg: From DATATAKING: acvlbical off 2011-Dec-19 01:51:03 LOG4 got_cormsg: From DATATAKING: alfafb 1 2011-Dec-19 01:51:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2011-Dec-19 01:51:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2011-Dec-19 01:51:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2011-Dec-19 01:51:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2011-Dec-19 01:51:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2011-Dec-19 01:51:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2011-Dec-19 01:51:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2011-Dec-19 01:51:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2011-Dec-19 01:51:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2011-Dec-19 01:51:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2011-Dec-19 01:51:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2011-Dec-19 01:51:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2011-Dec-19 01:51:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2011-Dec-19 01:51:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2011-Dec-19 01:51:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 01:51:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2011-Dec-19 01:51:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2011-Dec-19 01:51:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2011-Dec-19 01:51:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2011-Dec-19 01:51:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 01:51:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:11 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:11 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:11 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:12 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:17 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:17 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:17 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:18 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:18 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:18 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:18 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:18 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:19 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:19 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:19 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:19 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:19 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:19 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:19 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-19 01:51:19 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2011-Dec-19 01:51:19 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2011-Dec-19 01:51:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2011-Dec-19 01:51:19 STOP finish_task: Finishing task 'configuring IF/LO path' 2011-Dec-19 01:51:19 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Dec-19 01:51:19 DONE finish_task: DONE finished configuration: IF/LO path 2011-Dec-19 01:51:19 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-19 01:51:20 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2011-Dec-19 01:51:20 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Dec-19 01:51:20 BEGIN begin_task: Starting task 'configuring WAPPs' 2011-Dec-19 01:51:20 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2011-Dec-19 01:51:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2011-Dec-19 01:51:20 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2011-Dec-19 01:51:20 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Dec-19 01:51:20 START begin_task: Starting task 'selecting calibration port' 2011-Dec-19 01:51:20 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2011-Dec-19 01:51:20 LOG3 vw_send: To DATATAKING: calport 3 2011-Dec-19 01:51:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Dec-19 01:51:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 01:51:20 START begin_task: Starting task 'waiting on calport' 2011-Dec-19 01:51:20 LOG5 begin_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2011-Dec-19 01:51:20 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:20 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Dec-19 01:51:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 01:51:20 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:20 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-19 01:51:20 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Dec-19 01:51:20 LOG5 end_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2011-Dec-19 01:51:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Dec-19 01:51:20 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Dec-19 01:51:20 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2011-Dec-19 01:51:20 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-19 01:51:20 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-19 01:51:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-19 01:51:20 LOG5 begin_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2011-Dec-19 01:51:20 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-19 01:51:20 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-19 01:51:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-19 01:51:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-19 01:51:20 LOG5 end_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2011-Dec-19 01:51:20 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2011-Dec-19 01:51:20 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2011-Dec-19 01:51:20 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2011-Dec-19 01:51:20 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2011-Dec-19 01:51:20 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2011-Dec-19 01:51:20 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2011-Dec-19 01:51:20 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2011-Dec-19 01:51:20 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2011-Dec-19 01:51:20 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Edwin 2011-Dec-19 01:51:20 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Edwin 2011-Dec-19 01:51:20 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Edwin 2011-Dec-19 01:51:20 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Edwin 2011-Dec-19 01:51:20 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Dec-19 01:51:20 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Dec-19 01:51:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-19 01:51:20 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2011-Dec-19 01:51:20 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-19 01:51:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-19 01:51:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-19 01:51:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-19 01:51:20 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2011-Dec-19 01:51:21 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Edwin 2011-Dec-19 01:51:21 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Edwin 2011-Dec-19 01:51:21 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Edwin 2011-Dec-19 01:51:21 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Edwin 2011-Dec-19 01:51:21 STOP finish_task: Finishing task 'configuring WAPPs' 2011-Dec-19 01:51:21 LOG5 finish_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2011-Dec-19 01:51:21 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2011-Dec-19 01:51:21 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-19 01:51:21 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2011-Dec-19 01:51:21 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2011-Dec-19 01:51:21 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2011-Dec-19 01:51:21 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2011-Dec-19 01:51:21 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2011-Dec-19 01:51:21 LOG3 is_if_valid: Current source data: down 256.2 35.2 67 - - 231 3.6 2011-Dec-19 01:51:21 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2011-Dec-19 01:51:21 INFO5 is_if_valid: Condition parsed as: 0 2011-Dec-19 01:51:21 INFO1 is_if_valid: Skipping line 'IF isup(galfasrc) then' 2011-Dec-19 01:51:21 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2011-Dec-19 01:51:21 INFO1 run_command_line: Skipping line 'GOTO galfasrc' in non-true conditional branch 2011-Dec-19 01:51:21 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2011-Dec-19 01:51:21 LOG3 is_if_valid: Current source data: down 117.5 81.2 1004 - - 1150 7.0 2011-Dec-19 01:51:21 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc2) 2011-Dec-19 01:51:21 INFO5 is_if_valid: Condition parsed as: 0 2011-Dec-19 01:51:21 INFO1 is_if_valid: Skipping line 'ELSEIF isup(galfasrc2) then' 2011-Dec-19 01:51:21 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2011-Dec-19 01:51:21 INFO1 run_command_line: Skipping line 'GOTO galfasrc2' in non-true conditional branch 2011-Dec-19 01:51:21 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2011-Dec-19 01:51:21 INFO1 run_command_line: Processing 'ELSE'-commands since no earlier condition has been true 2011-Dec-19 01:51:21 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2011-Dec-19 01:51:21 BEGIN begin_task: Starting task 'tracking current position' 2011-Dec-19 01:51:21 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2011-Dec-19 01:51:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2011-Dec-19 01:51:22 INFO1 track_current_pos: Starting to track the current commanded position RA = 07:57:36.6 and Dec = +15:14:14.5 2011-Dec-19 01:51:22 LOG3 track_source: Calling 'track_source Cur-pos 075736.6 151414.5 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2011-Dec-19 01:51:22 START begin_task: Starting task 'sending tracking commands' 2011-Dec-19 01:51:22 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2011-Dec-19 01:51:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2011-Dec-19 01:51:22 INFO1 track_source: Starting to track Cur-pos 2011-Dec-19 01:51:22 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2011-Dec-19 01:51:22 LOG3 vw_send: To DATATAKING: set ra 075736.6 2011-Dec-19 01:51:22 LOG3 vw_send: To DATATAKING: set dec 151414.5 2011-Dec-19 01:51:22 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-19 01:51:22 LOG3 vw_send: To DATATAKING: pnt tr 075736.6 151414.5 -CJ 2011-Dec-19 01:51:22 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2011-Dec-19 01:51:22 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-19 01:51:22 LOG5 finish_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2011-Dec-19 01:51:22 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-19 01:51:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 01:51:22 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-19 01:51:22 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2011-Dec-19 01:51:22 START begin_task: Starting task 'waiting on telescope' 2011-Dec-19 01:51:22 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2011-Dec-19 01:51:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-19 01:51:22 LOG3 waittrk: Start waittrk 5 2011-Dec-19 01:51:22 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-19 01:51:22 LOG5 begin_task: Level: (4) ID = <10016> Status = 0 0 0 0 ok 2011-Dec-19 01:51:22 NOTE WAPPDATA-new_file: New FITS file: wapp.20111219.a2048.0000.fits 2011-Dec-19 01:51:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Edwin' 2011-Dec-19 01:51:22 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2011-Dec-19 01:51:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2011-Dec-19 01:51:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2011-Dec-19 01:51:22 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111219.a2048.0000.fits} 2011-Dec-19 01:51:22 LOG4 got_cormsg: From DATATAKING: set ra 075736.6 2011-Dec-19 01:51:22 LOG4 got_cormsg: From DATATAKING: set dec 151414.5 2011-Dec-19 01:51:22 LOG4 got_cormsg: From DATATAKING: vw% 075736.6 2011-Dec-19 01:51:22 LOG4 got_cormsg: From DATATAKING: vw% 151414.5 2011-Dec-19 01:51:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:22 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-19 01:51:22 LOG4 got_cormsg: From DATATAKING: pnt tr 075736.6 151414.5 -CJ 2011-Dec-19 01:51:22 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2011-Dec-19 01:51:22 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-19 01:51:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Edwin' 2011-Dec-19 01:51:27 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-19 01:51:27 LOG5 end_task: Level: (4) ID = <10016> Status = 0 0 0 0 ok 2011-Dec-19 01:51:27 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-19 01:51:27 LOG5 begin_task: Level: (4) ID = <10017> Status = 0 0 0 0 ok 2011-Dec-19 01:51:36 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-19 01:51:36 LOG5 end_task: Level: (4) ID = <10017> Status = 0 0 0 0 ok 2011-Dec-19 01:51:36 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-19 01:51:36 INFO2 waittrk: Now tracking Cur-pos 2011-Dec-19 01:51:36 LOG4 waittrk: Current telescope position: Az = 284.68 ZA = 10.93 2011-Dec-19 01:51:36 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-19 01:51:36 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2011-Dec-19 01:51:36 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-19 01:51:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 01:51:36 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-19 01:51:36 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2011-Dec-19 01:51:36 STOP finish_task: Finishing task 'tracking current position' 2011-Dec-19 01:51:36 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2011-Dec-19 01:51:36 DONE finish_task: DONE finished tracking: current position 2011-Dec-19 01:51:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-19 01:51:36 END end_task: Finishing task 'tracking current position' with status 'OK' 2011-Dec-19 01:51:36 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2011-Dec-19 01:51:36 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2011-Dec-19 01:51:36 NOTE execute_log: No source found in togs_ages.cat - tracking current position 2011-Dec-19 01:51:36 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2011-Dec-19 01:51:36 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2011-Dec-19 01:51:36 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2011-Dec-19 01:51:36 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2011-Dec-19 01:51:37 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2011-Dec-19 01:51:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2011-Dec-19 01:51:37 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2011-Dec-19 01:51:37 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2011-Dec-19 01:51:37 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-19 01:51:37 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-19 01:51:37 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2011-Dec-19 01:51:38 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-19 01:51:38 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2011-Dec-19 01:51:38 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-19 01:51:38 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2011-Dec-19 01:51:38 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-19 01:51:38 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2011-Dec-19 01:51:38 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2011-Dec-19 01:51:38 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2011-Dec-19 01:51:38 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-19 01:51:38 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2011-Dec-19 01:51:38 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2011-Dec-19 01:51:38 COMMAND run_command_line: EXECUTING command 16: 'WAITTRACK' 2011-Dec-19 01:51:38 BEGIN begin_task: Starting task 'waiting on telescope' 2011-Dec-19 01:51:38 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2011-Dec-19 01:51:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-19 01:51:38 LOG3 waittrk: Start waittrk 5 2011-Dec-19 01:51:38 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-19 01:51:38 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2011-Dec-19 01:51:43 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-19 01:51:43 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2011-Dec-19 01:51:43 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-19 01:51:43 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2011-Dec-19 01:51:44 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-19 01:51:44 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2011-Dec-19 01:51:44 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-19 01:51:44 INFO2 waittrk: Now tracking Cur-pos 2011-Dec-19 01:51:44 LOG4 waittrk: Current telescope position: Az = 284.73 ZA = 10.91 2011-Dec-19 01:51:44 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-19 01:51:44 LOG5 finish_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2011-Dec-19 01:51:44 DONE finish_task: DONE finished waiting: telescope on source 2011-Dec-19 01:51:44 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-19 01:51:44 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-19 01:51:44 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2011-Dec-19 01:51:44 COMMAND run_command_line: EXECUTING command 20: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2011-Dec-19 01:51:44 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2011-Dec-19 01:51:44 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-19 01:51:44 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2011-Dec-19 01:51:44 BEGIN begin_task: Starting task 'smart frequency switching' 2011-Dec-19 01:51:44 LOG5 begin_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2011-Dec-19 01:51:44 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2011-Dec-19 01:51:44 INFO1 smartfreq: Starting pattern: Smart frequency switching 2011-Dec-19 01:51:44 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2011-Dec-19 01:51:44 START begin_task: Starting task 'selecting calibration type' 2011-Dec-19 01:51:44 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2011-Dec-19 01:51:44 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-19 01:51:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-19 01:51:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 01:51:44 START begin_task: Starting task 'waiting on setcal' 2011-Dec-19 01:51:44 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2011-Dec-19 01:51:44 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-19 01:51:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 01:51:44 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:45 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-19 01:51:45 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-19 01:51:45 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2011-Dec-19 01:51:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-19 01:51:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-19 01:51:45 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-19 01:51:45 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-19 01:51:45 LOG5 begin_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2011-Dec-19 01:51:45 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:45 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-19 01:51:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-19 01:51:45 LOG5 end_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2011-Dec-19 01:51:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-19 01:51:45 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-19 01:51:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-19 01:51:45 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-19 01:51:45 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-19 01:51:45 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2011-Dec-19 01:51:45 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-19 01:51:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-19 01:51:45 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2011-Dec-19 01:51:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-19 01:51:45 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-19 01:51:45 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-19 01:51:45 LOG5 end_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2011-Dec-19 01:51:45 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Edwin 2011-Dec-19 01:51:45 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Edwin 2011-Dec-19 01:51:45 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Edwin 2011-Dec-19 01:51:45 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Edwin 2011-Dec-19 01:51:45 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20111219.a2048.0000.fits' is empty! 2011-Dec-19 01:51:45 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2011-Dec-19 01:51:45 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-19 01:51:45 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2011-Dec-19 01:51:45 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-19 01:51:45 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-19 01:51:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-19 01:51:45 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2011-Dec-19 01:51:45 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-19 01:51:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-19 01:51:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-19 01:51:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-19 01:51:45 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2011-Dec-19 01:51:45 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2011-Dec-19 01:51:45 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-19 01:51:45 LOG5 begin_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2011-Dec-19 01:51:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2011-Dec-19 01:51:45 INFO2 adjust_power: Starting to adjust WAPP power 2011-Dec-19 01:51:45 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-19 01:51:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-19 01:51:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 01:51:45 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-19 01:51:45 LOG5 begin_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2011-Dec-19 01:51:45 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-19 01:51:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 01:51:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Edwin' 2011-Dec-19 01:51:48 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:48 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-19 01:51:48 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-19 01:51:48 LOG5 end_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2011-Dec-19 01:51:48 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-19 01:51:48 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-19 01:51:48 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2011-Dec-19 01:51:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-19 01:51:48 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 01:51:48 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 01:51:48 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 01:51:48 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 01:51:48 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-19 01:51:48 LOG5 begin_task: Level: (5) ID = <10032> Status = 0 0 0 0 ok 2011-Dec-19 01:51:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-19 01:51:48 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:48 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 8 6 dB 2011-Dec-19 01:51:48 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 3 dB 2011-Dec-19 01:51:48 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 3 dB 2011-Dec-19 01:51:49 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2011-Dec-19 01:51:49 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-19 01:51:49 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-19 01:51:49 LOG5 end_task: Level: (5) ID = <10032> Status = 0 0 0 0 ok 2011-Dec-19 01:51:49 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.069 1.104 ALFA beam 1: 0.915 0.984 2011-Dec-19 01:51:49 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.911 1.005 ALFA beam 3: 1.058 0.886 2011-Dec-19 01:51:49 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.840 1.106 ALFA beam 5: 0.924 1.084 2011-Dec-19 01:51:49 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.088 0.014 ALFA beam 7: 0.944 0.014 2011-Dec-19 01:51:49 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-19 01:51:49 LOG5 finish_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2011-Dec-19 01:51:49 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-19 01:51:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 01:51:49 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-19 01:51:49 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2011-Dec-19 01:51:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-19 01:51:49 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-19 01:51:49 LOG5 finish_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2011-Dec-19 01:51:49 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2011-Dec-19 01:51:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 01:51:49 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-19 01:51:49 LOG5 end_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2011-Dec-19 01:51:49 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2011-Dec-19 01:51:49 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-19 01:51:49 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2011-Dec-19 01:51:49 LOG5 antvel: Calling 'antvel 75736.600000 151414.500000 J Topocentric 0' 2011-Dec-19 01:51:49 LOG2 antvel: Precessing RA = 07:57:36.6 Dec = +15:14:14.5 Epoch = 2011.96667 J 2011-Dec-19 01:51:49 LOG2 antvel: Computed apparent RA = 07:58:19.5 Dec = +15:12:08.0 2011-Dec-19 01:51:49 LOG2 antvel: Parameters to Doppler: Topocentric 21108 2011 353 0.0 2011-Dec-19 01:51:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-19 01:51:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2011-Dec-19 01:51:49 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2011-Dec-19 01:51:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-19 01:51:49 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-19 01:51:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-19 01:51:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 01:51:49 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2011-Dec-19 01:51:49 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-19 01:51:49 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2011-Dec-19 01:51:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-19 01:51:49 LOG5 log_alfabeam: Parameters: 7.9601666666666686 15.23736111111111 7.245542 2011.9666738915507 18.999933 2011-Dec-19 01:51:49 LOG4 log_alfabeam: ALFABEAM 0 7.960166666666668 15.237361111111104 2011-Dec-19 01:51:49 LOG4 log_alfabeam: ALFABEAM 1 7.952920935008166 15.253770703081337 2011-Dec-19 01:51:49 LOG4 log_alfabeam: ALFABEAM 2 7.956000683586026 15.166541848038909 2011-Dec-19 01:51:49 LOG4 log_alfabeam: ALFABEAM 3 7.963238372258586 15.149558945075299 2011-Dec-19 01:51:49 LOG4 log_alfabeam: ALFABEAM 4 7.967416647082321 15.221222576305241 2011-Dec-19 01:51:49 LOG4 log_alfabeam: ALFABEAM 5 7.964302791595417 15.308892977185362 2011-Dec-19 01:51:49 LOG4 log_alfabeam: ALFABEAM 6 7.957045070440281 15.324457215106893 2011-Dec-19 01:51:49 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135300001 2011-Dec-19 01:51:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-19 01:51:49 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2011-Dec-19 01:51:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-19 01:51:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-19 01:51:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 01:51:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:51:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-19 01:51:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21110.00 2011-Dec-19 01:51:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-19 01:51:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:51:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:51:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:51:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:51:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 01:51:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 01:51:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-19 01:51:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-19 01:51:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-19 01:51:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.137 0.897 1.005 2011-Dec-19 01:51:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.911 1.052 1.097 0.914 2011-Dec-19 01:51:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.856 1.108 0.972 1.101 2011-Dec-19 01:51:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.061 0.025 0.924 0.026 2011-Dec-19 01:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.132 (still bad) 2011-Dec-19 01:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.131 (still bad) 2011-Dec-19 01:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.132 (still bad) 2011-Dec-19 01:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.130 (still bad) 2011-Dec-19 01:52:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-19 01:52:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-19 01:52:00 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2011-Dec-19 01:52:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-19 01:52:00 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2011-Dec-19 01:52:00 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2011-Dec-19 01:52:00 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-19 01:52:00 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2011-Dec-19 01:52:00 LOG5 antvel: Calling 'antvel 75736.600000 151414.500000 J Topocentric 0' 2011-Dec-19 01:52:00 LOG2 antvel: Precessing RA = 07:57:36.6 Dec = +15:14:14.5 Epoch = 2011.96667 J 2011-Dec-19 01:52:00 LOG2 antvel: Computed apparent RA = 07:58:19.5 Dec = +15:12:08.0 2011-Dec-19 01:52:00 LOG2 antvel: Parameters to Doppler: Topocentric 21120 2011 353 0.0 2011-Dec-19 01:52:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-19 01:52:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2011-Dec-19 01:52:00 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2011-Dec-19 01:52:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-19 01:52:00 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-19 01:52:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-19 01:52:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 01:52:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2011-Dec-19 01:52:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-19 01:52:00 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2011-Dec-19 01:52:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-19 01:52:00 LOG5 log_alfabeam: Parameters: 7.9601666666666686 15.23736111111111 7.248885 2011.9666742718077 18.999933 2011-Dec-19 01:52:00 LOG4 log_alfabeam: ALFABEAM 0 7.960166666666668 15.237361111111113 2011-Dec-19 01:52:00 LOG4 log_alfabeam: ALFABEAM 1 7.952922261711624 15.253892744042497 2011-Dec-19 01:52:00 LOG4 log_alfabeam: ALFABEAM 2 7.955994955030622 15.166613255555115 2011-Dec-19 01:52:00 LOG4 log_alfabeam: ALFABEAM 3 7.963231248802161 15.149506057508455 2011-Dec-19 01:52:00 LOG4 log_alfabeam: ALFABEAM 4 7.967415361486620 15.221101866897346 2011-Dec-19 01:52:00 LOG4 log_alfabeam: ALFABEAM 5 7.964308438116762 15.308825238344129 2011-Dec-19 01:52:00 LOG4 log_alfabeam: ALFABEAM 6 7.957051936965702 15.324507919646027 2011-Dec-19 01:52:00 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135300002 2011-Dec-19 01:52:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-19 01:52:01 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2011-Dec-19 01:52:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-19 01:52:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-19 01:52:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 01:52:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:52:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:52:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-19 01:52:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21122.00 2011-Dec-19 01:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.132 (still bad) 2011-Dec-19 01:52:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-19 01:52:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:52:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:52:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:52:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:52:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 01:52:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 01:52:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-19 01:52:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-19 01:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.162 (still bad) 2011-Dec-19 01:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.158 (still bad) 2011-Dec-19 01:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.157 (still bad) 2011-Dec-19 01:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.158 (still bad) 2011-Dec-19 01:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.162 (still bad) 2011-Dec-19 01:52:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-19 01:52:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-19 01:52:12 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2011-Dec-19 01:52:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-19 01:52:12 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2011-Dec-19 01:52:12 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2011-Dec-19 01:52:12 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-19 01:52:12 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2011-Dec-19 01:52:12 LOG5 antvel: Calling 'antvel 75736.600000 151414.500000 J Topocentric 0' 2011-Dec-19 01:52:12 LOG2 antvel: Precessing RA = 07:57:36.6 Dec = +15:14:14.5 Epoch = 2011.96667 J 2011-Dec-19 01:52:12 LOG2 antvel: Computed apparent RA = 07:58:19.5 Dec = +15:12:08.0 2011-Dec-19 01:52:12 LOG2 antvel: Parameters to Doppler: Topocentric 21132 2011 353 0.0 2011-Dec-19 01:52:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-19 01:52:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2011-Dec-19 01:52:12 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2011-Dec-19 01:52:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-19 01:52:12 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-19 01:52:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-19 01:52:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 01:52:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2011-Dec-19 01:52:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-19 01:52:12 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2011-Dec-19 01:52:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-19 01:52:12 LOG5 log_alfabeam: Parameters: 7.9601666666666686 15.23736111111111 7.252227 2011.9666746520647 18.999933 2011-Dec-19 01:52:12 LOG4 log_alfabeam: ALFABEAM 0 7.960166666666668 15.237361111111111 2011-Dec-19 01:52:12 LOG4 log_alfabeam: ALFABEAM 1 7.952923610448249 15.254015874185445 2011-Dec-19 01:52:12 LOG4 log_alfabeam: ALFABEAM 2 7.955989180249001 15.166685410463062 2011-Dec-19 01:52:12 LOG4 log_alfabeam: ALFABEAM 3 7.963224056126562 15.149452812501199 2011-Dec-19 01:52:12 LOG4 log_alfabeam: ALFABEAM 4 7.967414054425713 15.220980077378581 2011-Dec-19 01:52:12 LOG4 log_alfabeam: ALFABEAM 5 7.964314130858081 15.308756784891996 2011-Dec-19 01:52:12 LOG4 log_alfabeam: ALFABEAM 6 7.957058870246162 15.324558973819773 2011-Dec-19 01:52:12 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135300003 2011-Dec-19 01:52:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-19 01:52:13 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2011-Dec-19 01:52:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-19 01:52:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-19 01:52:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 01:52:13 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:52:13 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:52:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-19 01:52:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21134.00 2011-Dec-19 01:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.157 (still bad) 2011-Dec-19 01:52:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-19 01:52:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:52:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:52:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:52:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:52:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 01:52:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 01:52:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-19 01:52:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-19 01:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.156 (still bad) 2011-Dec-19 01:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.156 (still bad) 2011-Dec-19 01:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.157 (still bad) 2011-Dec-19 01:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.159 (still bad) 2011-Dec-19 01:52:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-19 01:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.155 (still bad) 2011-Dec-19 01:52:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-19 01:52:24 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2011-Dec-19 01:52:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-19 01:52:24 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2011-Dec-19 01:52:24 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2011-Dec-19 01:52:24 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-19 01:52:24 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2011-Dec-19 01:52:24 LOG5 antvel: Calling 'antvel 75736.600000 151414.500000 J Topocentric 0' 2011-Dec-19 01:52:24 LOG2 antvel: Precessing RA = 07:57:36.6 Dec = +15:14:14.5 Epoch = 2011.96668 J 2011-Dec-19 01:52:24 LOG2 antvel: Computed apparent RA = 07:58:19.5 Dec = +15:12:08.0 2011-Dec-19 01:52:24 LOG2 antvel: Parameters to Doppler: Topocentric 21144 2011 353 0.0 2011-Dec-19 01:52:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-19 01:52:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2011-Dec-19 01:52:24 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2011-Dec-19 01:52:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-19 01:52:24 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-19 01:52:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-19 01:52:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 01:52:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2011-Dec-19 01:52:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-19 01:52:24 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2011-Dec-19 01:52:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-19 01:52:24 LOG5 log_alfabeam: Parameters: 7.9601666666666686 15.23736111111111 7.255570 2011.9666750323217 18.999933 2011-Dec-19 01:52:24 LOG4 log_alfabeam: ALFABEAM 0 7.960166666666671 15.237361111111118 2011-Dec-19 01:52:24 LOG4 log_alfabeam: ALFABEAM 1 7.952924982460688 15.254140180618462 2011-Dec-19 01:52:24 LOG4 log_alfabeam: ALFABEAM 2 7.955983355293554 15.166758366936795 2011-Dec-19 01:52:24 LOG4 log_alfabeam: ALFABEAM 3 7.963216788983217 15.149399175607455 2011-Dec-19 01:52:24 LOG4 log_alfabeam: ALFABEAM 4 7.967412724691955 15.220857121529338 2011-Dec-19 01:52:24 LOG4 log_alfabeam: ALFABEAM 5 7.964319873726531 15.308687565305760 2011-Dec-19 01:52:24 LOG4 log_alfabeam: ALFABEAM 6 7.957065875340208 15.324610410800746 2011-Dec-19 01:52:24 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135300004 2011-Dec-19 01:52:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-19 01:52:25 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2011-Dec-19 01:52:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-19 01:52:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-19 01:52:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 01:52:25 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:52:25 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:52:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-19 01:52:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21146.00 2011-Dec-19 01:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.155 (still bad) 2011-Dec-19 01:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-19 01:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 01:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 01:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-19 01:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-19 01:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.149 (still bad) 2011-Dec-19 01:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.144 (still bad) 2011-Dec-19 01:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.147 (still bad) 2011-Dec-19 01:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.146 (still bad) 2011-Dec-19 01:52:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-19 01:52:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-19 01:52:36 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2011-Dec-19 01:52:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-19 01:52:36 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2011-Dec-19 01:52:36 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2011-Dec-19 01:52:36 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-19 01:52:36 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2011-Dec-19 01:52:36 LOG5 antvel: Calling 'antvel 75736.600000 151414.500000 J Topocentric 0' 2011-Dec-19 01:52:36 LOG2 antvel: Precessing RA = 07:57:36.6 Dec = +15:14:14.5 Epoch = 2011.96668 J 2011-Dec-19 01:52:36 LOG2 antvel: Computed apparent RA = 07:58:19.5 Dec = +15:12:08.0 2011-Dec-19 01:52:36 LOG2 antvel: Parameters to Doppler: Topocentric 21156 2011 353 0.0 2011-Dec-19 01:52:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-19 01:52:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2011-Dec-19 01:52:36 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2011-Dec-19 01:52:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-19 01:52:36 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-19 01:52:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-19 01:52:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 01:52:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2011-Dec-19 01:52:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-19 01:52:36 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2011-Dec-19 01:52:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-19 01:52:36 LOG5 log_alfabeam: Parameters: 7.9601666666666686 15.23736111111111 7.258912 2011.9666754125788 18.999933 2011-Dec-19 01:52:36 LOG4 log_alfabeam: ALFABEAM 0 7.960166666666665 15.237361111111104 2011-Dec-19 01:52:36 LOG4 log_alfabeam: ALFABEAM 1 7.952926377373225 15.254265602591460 2011-Dec-19 01:52:36 LOG4 log_alfabeam: ALFABEAM 2 7.955977483151774 15.166832092517772 2011-Dec-19 01:52:36 LOG4 log_alfabeam: ALFABEAM 3 7.963209450760096 15.149345176332174 2011-Dec-19 01:52:36 LOG4 log_alfabeam: ALFABEAM 4 7.967411372646088 15.220733059378608 2011-Dec-19 01:52:36 LOG4 log_alfabeam: ALFABEAM 5 7.964325663792733 15.308617610250595 2011-Dec-19 01:52:36 LOG4 log_alfabeam: ALFABEAM 6 7.957072948981339 15.324662202440987 2011-Dec-19 01:52:36 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135300005 2011-Dec-19 01:52:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-19 01:52:37 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2011-Dec-19 01:52:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-19 01:52:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-19 01:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.146 (still bad) 2011-Dec-19 01:52:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 01:52:37 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:52:37 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:52:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-19 01:52:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21158.00 2011-Dec-19 01:52:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-19 01:52:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:52:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:52:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:52:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:52:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 01:52:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 01:52:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-19 01:52:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-19 01:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-19 01:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-19 01:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-19 01:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-19 01:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-19 01:52:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-19 01:52:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-19 01:52:48 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2011-Dec-19 01:52:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-19 01:52:48 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2011-Dec-19 01:52:48 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2011-Dec-19 01:52:48 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-19 01:52:48 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2011-Dec-19 01:52:48 LOG5 antvel: Calling 'antvel 75736.600000 151414.500000 J Topocentric 0' 2011-Dec-19 01:52:48 LOG2 antvel: Precessing RA = 07:57:36.6 Dec = +15:14:14.5 Epoch = 2011.96668 J 2011-Dec-19 01:52:48 LOG2 antvel: Computed apparent RA = 07:58:19.5 Dec = +15:12:08.0 2011-Dec-19 01:52:48 LOG2 antvel: Parameters to Doppler: Topocentric 21168 2011 353 0.0 2011-Dec-19 01:52:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-19 01:52:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2011-Dec-19 01:52:48 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2011-Dec-19 01:52:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-19 01:52:48 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-19 01:52:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-19 01:52:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 01:52:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2011-Dec-19 01:52:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-19 01:52:48 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2011-Dec-19 01:52:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-19 01:52:48 LOG5 log_alfabeam: Parameters: 7.9601666666666686 15.23736111111111 7.262254 2011.966675792836 18.999933 2011-Dec-19 01:52:48 LOG4 log_alfabeam: ALFABEAM 0 7.960166666666668 15.237361111111106 2011-Dec-19 01:52:48 LOG4 log_alfabeam: ALFABEAM 1 7.952927796047804 15.254392190937377 2011-Dec-19 01:52:48 LOG4 log_alfabeam: ALFABEAM 2 7.955971561585294 15.166906620302584 2011-Dec-19 01:52:48 LOG4 log_alfabeam: ALFABEAM 3 7.963202038318454 15.149290796101370 2011-Dec-19 01:52:48 LOG4 log_alfabeam: ALFABEAM 4 7.967409997449217 15.220607840583682 2011-Dec-19 01:52:48 LOG4 log_alfabeam: ALFABEAM 5 7.964331503279778 15.308546888191733 2011-Dec-19 01:52:48 LOG4 log_alfabeam: ALFABEAM 6 7.957080094194365 15.324714366702057 2011-Dec-19 01:52:48 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135300006 2011-Dec-19 01:52:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-19 01:52:49 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2011-Dec-19 01:52:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-19 01:52:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-19 01:52:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 01:52:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:52:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-19 01:52:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-19 01:52:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21170.00 2011-Dec-19 01:52:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-19 01:52:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:52:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:52:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:52:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:52:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 01:52:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 01:52:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-19 01:52:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-19 01:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-19 01:52:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-19 01:52:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.091 1.116 0.916 0.989 2011-Dec-19 01:52:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 1.030 1.069 0.908 2011-Dec-19 01:52:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.859 1.111 0.945 1.092 2011-Dec-19 01:52:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.095 0.025 0.951 0.020 2011-Dec-19 01:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-19 01:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-19 01:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-19 01:53:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-19 01:53:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-19 01:53:00 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2011-Dec-19 01:53:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-19 01:53:00 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2011-Dec-19 01:53:00 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2011-Dec-19 01:53:00 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-19 01:53:00 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2011-Dec-19 01:53:00 LOG5 antvel: Calling 'antvel 75736.600000 151414.500000 J Topocentric 0' 2011-Dec-19 01:53:00 LOG2 antvel: Precessing RA = 07:57:36.6 Dec = +15:14:14.5 Epoch = 2011.96668 J 2011-Dec-19 01:53:00 LOG2 antvel: Computed apparent RA = 07:58:19.5 Dec = +15:12:08.0 2011-Dec-19 01:53:00 LOG2 antvel: Parameters to Doppler: Topocentric 21180 2011 353 0.0 2011-Dec-19 01:53:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-19 01:53:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2011-Dec-19 01:53:00 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2011-Dec-19 01:53:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-19 01:53:00 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-19 01:53:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-19 01:53:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 01:53:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2011-Dec-19 01:53:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-19 01:53:00 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2011-Dec-19 01:53:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-19 01:53:00 LOG5 log_alfabeam: Parameters: 7.9601666666666686 15.23736111111111 7.265597 2011.966676173093 18.999933 2011-Dec-19 01:53:00 LOG4 log_alfabeam: ALFABEAM 0 7.960166666666661 15.237361111111106 2011-Dec-19 01:53:00 LOG4 log_alfabeam: ALFABEAM 1 7.952929239385066 15.254519998094080 2011-Dec-19 01:53:00 LOG4 log_alfabeam: ALFABEAM 2 7.955965588290581 15.166981984556687 2011-Dec-19 01:53:00 LOG4 log_alfabeam: ALFABEAM 3 7.963194548414113 15.149236015883531 2011-Dec-19 01:53:00 LOG4 log_alfabeam: ALFABEAM 4 7.967408598224723 15.220481413209193 2011-Dec-19 01:53:00 LOG4 log_alfabeam: ALFABEAM 5 7.964337394476253 15.308475366474626 2011-Dec-19 01:53:00 LOG4 log_alfabeam: ALFABEAM 6 7.957087314105781 15.324766921996600 2011-Dec-19 01:53:00 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135300007 2011-Dec-19 01:53:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-19 01:53:01 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2011-Dec-19 01:53:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-19 01:53:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-19 01:53:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 01:53:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:53:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:53:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-19 01:53:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21182.00 2011-Dec-19 01:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-19 01:53:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-19 01:53:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:53:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:53:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:53:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:53:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 01:53:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 01:53:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-19 01:53:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-19 01:53:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-19 01:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-19 01:53:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-19 01:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-19 01:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-19 01:53:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-19 01:53:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-19 01:53:12 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2011-Dec-19 01:53:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-19 01:53:12 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2011-Dec-19 01:53:12 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2011-Dec-19 01:53:12 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-19 01:53:12 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-19 01:53:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-19 01:53:12 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2011-Dec-19 01:53:12 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-19 01:53:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-19 01:53:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-19 01:53:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-19 01:53:12 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2011-Dec-19 01:53:12 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2011-Dec-19 01:53:12 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2011-Dec-19 01:53:12 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2011-Dec-19 01:53:12 LOG5 antvel: Calling 'antvel 75736.600000 151414.500000 J Topocentric 0' 2011-Dec-19 01:53:12 LOG2 antvel: Precessing RA = 07:57:36.6 Dec = +15:14:14.5 Epoch = 2011.96668 J 2011-Dec-19 01:53:12 LOG2 antvel: Computed apparent RA = 07:58:19.5 Dec = +15:12:08.0 2011-Dec-19 01:53:12 LOG2 antvel: Parameters to Doppler: Topocentric 21192 2011 353 0.0 2011-Dec-19 01:53:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-19 01:53:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2011-Dec-19 01:53:12 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2011-Dec-19 01:53:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-19 01:53:12 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-19 01:53:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-19 01:53:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 01:53:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2011-Dec-19 01:53:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-19 01:53:12 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2011-Dec-19 01:53:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2011-Dec-19 01:53:12 LOG5 log_alfabeam: Parameters: 7.9601666666666686 15.23736111111111 7.268939 2011.96667655335 18.999933 2011-Dec-19 01:53:12 LOG4 log_alfabeam: ALFABEAM 0 7.960166666666664 15.237361111111120 2011-Dec-19 01:53:12 LOG4 log_alfabeam: ALFABEAM 1 7.952930706997348 15.254648961843484 2011-Dec-19 01:53:12 LOG4 log_alfabeam: ALFABEAM 2 7.955959566325887 15.167058152006923 2011-Dec-19 01:53:12 LOG4 log_alfabeam: ALFABEAM 3 7.963186984518491 15.149180865863192 2011-Dec-19 01:53:12 LOG4 log_alfabeam: ALFABEAM 4 7.967407175344809 15.220353838736710 2011-Dec-19 01:53:12 LOG4 log_alfabeam: ALFABEAM 5 7.964343334382996 15.308403076536965 2011-Dec-19 01:53:12 LOG4 log_alfabeam: ALFABEAM 6 7.957094605368584 15.324819839522855 2011-Dec-19 01:53:12 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135300008 2011-Dec-19 01:53:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-19 01:53:13 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2011-Dec-19 01:53:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-19 01:53:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-19 01:53:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 01:53:13 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:53:13 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:53:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2011-Dec-19 01:53:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21194.00 2011-Dec-19 01:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-19 01:53:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-19 01:53:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:53:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:53:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:53:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:53:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 01:53:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 01:53:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-19 01:53:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-19 01:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.555 (still bad) 2011-Dec-19 01:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.552 (still bad) 2011-Dec-19 01:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.551 (still bad) 2011-Dec-19 01:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.555 (still bad) 2011-Dec-19 01:53:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-19 01:53:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-19 01:53:24 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2011-Dec-19 01:53:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-19 01:53:24 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2011-Dec-19 01:53:24 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2011-Dec-19 01:53:24 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2011-Dec-19 01:53:24 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2011-Dec-19 01:53:24 LOG5 antvel: Calling 'antvel 75736.600000 151414.500000 J Topocentric 0' 2011-Dec-19 01:53:24 LOG2 antvel: Precessing RA = 07:57:36.6 Dec = +15:14:14.5 Epoch = 2011.96668 J 2011-Dec-19 01:53:24 LOG2 antvel: Computed apparent RA = 07:58:19.5 Dec = +15:12:08.0 2011-Dec-19 01:53:24 LOG2 antvel: Parameters to Doppler: Topocentric 21204 2011 353 0.0 2011-Dec-19 01:53:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-19 01:53:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2011-Dec-19 01:53:24 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2011-Dec-19 01:53:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-19 01:53:24 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-19 01:53:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-19 01:53:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 01:53:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2011-Dec-19 01:53:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-19 01:53:24 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2011-Dec-19 01:53:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2011-Dec-19 01:53:24 LOG5 log_alfabeam: Parameters: 7.9601666666666686 15.23736111111111 7.272282 2011.966676933607 18.999933 2011-Dec-19 01:53:24 LOG4 log_alfabeam: ALFABEAM 0 7.960166666666668 15.237361111111106 2011-Dec-19 01:53:24 LOG4 log_alfabeam: ALFABEAM 1 7.952932200249750 15.254779173829524 2011-Dec-19 01:53:24 LOG4 log_alfabeam: ALFABEAM 2 7.955953491565657 15.167135180272526 2011-Dec-19 01:53:24 LOG4 log_alfabeam: ALFABEAM 3 7.963179341077760 15.149125310446948 2011-Dec-19 01:53:24 LOG4 log_alfabeam: ALFABEAM 4 7.967405727482310 15.220225026443343 2011-Dec-19 01:53:24 LOG4 log_alfabeam: ALFABEAM 5 7.964349327086730 15.308329963550813 2011-Dec-19 01:53:24 LOG4 log_alfabeam: ALFABEAM 6 7.957101973335623 15.324873153593751 2011-Dec-19 01:53:24 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135300009 2011-Dec-19 01:53:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-19 01:53:25 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2011-Dec-19 01:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.550 (still bad) 2011-Dec-19 01:53:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-19 01:53:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-19 01:53:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 01:53:25 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:53:25 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:53:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2011-Dec-19 01:53:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21206.00 2011-Dec-19 01:53:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-19 01:53:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:53:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:53:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:53:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:53:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 01:53:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 01:53:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-19 01:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.550 (still bad) 2011-Dec-19 01:53:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-19 01:53:27 COMMAND CIMA-send_to_exec: Sending command to abort observation 2011-Dec-19 01:53:27 LOG4 exec_msg: From OBSERVER: abort_task abort 2011-Dec-19 01:53:27 WARNING abort_task: WARNING abort requested! 2011-Dec-19 01:53:27 WARNING abort_task: WARNING Aborting waiting on WAPP+GALFA spectra 2011-Dec-19 01:53:27 WARNING abort_task: WARNING Aborting wait for waiting on WAPP+GALFA spectra 2011-Dec-19 01:53:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'ABORT' 2011-Dec-19 01:53:27 LOG5 end_task: Level: (4) ID = <10051> Status = 1 0 0 0 abort 2011-Dec-19 01:53:28 LOG4 stop_backends: Calling 'stop_backends' 2011-Dec-19 01:53:28 START begin_task: Starting task 'stopping the WAPPs' 2011-Dec-19 01:53:28 LOG5 begin_task: Level: (4) ID = <10052> Status = 1 0 0 0 abort 2011-Dec-19 01:53:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2011-Dec-19 01:53:28 INFO1 stop_wapp: Stopping the WAPPs 2011-Dec-19 01:53:28 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2011-Dec-19 01:53:28 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2011-Dec-19 01:53:28 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2011-Dec-19 01:53:28 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2011-Dec-19 01:53:28 START begin_task: Starting task 'waiting on stopping WAPPs' 2011-Dec-19 01:53:28 LOG5 begin_task: Level: (5) ID = <10053> Status = 1 0 0 0 abort 2011-Dec-19 01:53:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2011-Dec-19 01:53:29 NOTE WAPP=1+2+3+4-wappcon: WAPP successfully aborted! 2011-Dec-19 01:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.608 (still bad) 2011-Dec-19 01:53:29 LOG4 WAPP=1+2+3+4-start_spectra: Abort request received 2011-Dec-19 01:53:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-19 01:53:29 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'ABORT' 2011-Dec-19 01:53:29 LOG5 end_task: Level: (5) ID = <10053> Status = 1 0 0 0 abort 2011-Dec-19 01:53:29 STOP end_task: Finishing task 'stopping the WAPPs' with status 'ABORT' 2011-Dec-19 01:53:29 LOG5 end_task: Level: (4) ID = <10052> Status = 1 0 0 0 abort 2011-Dec-19 01:53:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'ABORT' 2011-Dec-19 01:53:29 LOG5 end_task: Level: (3) ID = <10050> Status = 1 0 0 0 abort 2011-Dec-19 01:53:29 INFO2 smartfreq: Switching off CAL 2011-Dec-19 01:53:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-19 01:53:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-19 01:53:29 INFO3 restore_frequencies: Restoring original frequencies 2011-Dec-19 01:53:29 LOG5 antvel: Calling 'antvel 75736.600000 151414.500000 J Topocentric 0' 2011-Dec-19 01:53:29 LOG2 antvel: Precessing RA = 07:57:36.6 Dec = +15:14:14.5 Epoch = 2011.96668 J 2011-Dec-19 01:53:29 LOG2 antvel: Computed apparent RA = 07:58:19.5 Dec = +15:12:08.0 2011-Dec-19 01:53:29 LOG2 antvel: Parameters to Doppler: Topocentric 21209 2011 353 0.0 2011-Dec-19 01:53:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-19 01:53:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2011-Dec-19 01:53:29 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2011-Dec-19 01:53:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-19 01:53:29 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-19 01:53:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2011-Dec-19 01:53:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 01:53:29 STOP finish_task: Finishing task 'smart frequency switching' 2011-Dec-19 01:53:29 LOG5 finish_task: Level: (2) ID = <10023> Status = 1 0 0 0 abort 2011-Dec-19 01:53:29 WARNING finish_task: WARNING aborted pattern: smart frequency switching 2011-Dec-19 01:53:29 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2011-Dec-19 01:53:29 END end_task: Finishing task 'smart frequency switching' with status 'ABORT' 2011-Dec-19 01:53:29 LOG5 end_task: Level: (2) ID = <10023> Status = 1 0 0 0 abort 2011-Dec-19 01:53:29 ALERT run_command_file: Stopping command file processing at line 20! 2011-Dec-19 01:53:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2011-Dec-19 01:53:30 STOP finish_task: Finishing task 'running command file '111219Night.cmd'' 2011-Dec-19 01:53:30 LOG5 finish_task: Level: (1) ID = <10002> Status = 1 0 0 0 abort 2011-Dec-19 01:53:30 WARNING finish_task: WARNING aborted running: command file '111219Night.cmd' 2011-Dec-19 01:53:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2011-Dec-19 01:53:30 END end_task: Finishing task 'running command file '111219Night.cmd'' with status 'ABORT' 2011-Dec-19 01:53:30 LOG5 end_task: Level: (1) ID = <10002> Status = 1 0 0 0 abort 2011-Dec-19 01:53:30 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-19 01:53:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2011-Dec-19 01:53:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-19 01:53:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 01:53:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-19 01:53:30 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:53:30 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:54:09 INFO5 CIMA-read_in_command_file: Included command file 'command_galfacurpos_cima31.cmd' (at lines 49 - 65) 2011-Dec-19 01:54:09 INFO4 CIMA-load_command_file: Loaded command file '111219morning.cmd' 2011-Dec-19 01:54:25 INFO1 CIMA-run_command_file: Transferring command file '111219morning.cmd' to executive ... 2011-Dec-19 01:54:25 INFO1 CIMA-run_command_file: Transferring command file '111219morning.cmd' to executive ... 2011-Dec-19 01:54:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD ages_mock.conf} 2011-Dec-19 01:54:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2011-Dec-19 01:54:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {CATALOG AGESFull.cat} 2011-Dec-19 01:54:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 9 {IF LSTSLEW(AGES3193_p3_032) < 085041 THEN} 2011-Dec-19 01:54:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 10 {FIXEDDRIFT az=249.64 alfaangle=-53.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_032 ra=95300.00 dec=230630.00} 2011-Dec-19 01:54:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {ENDIF} 2011-Dec-19 01:54:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 16 {IF LSTSLEW(AGES3193_p3_034) < 091411 THEN} 2011-Dec-19 01:54:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 17 {FIXEDDRIFT az=241.63 alfaangle=-42.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_034 ra=95300.00 dec=230330.00} 2011-Dec-19 01:54:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 20 {ENDIF} 2011-Dec-19 01:54:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 23 {IF LSTSLEW(AGES3193_p3_036) < 093741 THEN} 2011-Dec-19 01:54:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 24 {FIXEDDRIFT az=218.49 alfaangle=-16.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_036 ra=95300.00 dec=230030.00} 2011-Dec-19 01:54:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 27 {ENDIF} 2011-Dec-19 01:54:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 30 {IF LSTSLEW(AGES3193_p3_038) < 100341 THEN} 2011-Dec-19 01:54:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 31 {FIXEDDRIFT az=153.19 alfaangle=43.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_038 ra=95300.00 dec=225730.00} 2011-Dec-19 01:54:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 34 {ENDIF} 2011-Dec-19 01:54:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 37 {IF LSTSLEW(AGES3193_p3_040) < 102711 THEN} 2011-Dec-19 01:54:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 38 {FIXEDDRIFT az=121.25 alfaangle=77.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_040 ra=95300.00 dec=225430.00} 2011-Dec-19 01:54:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 41 {ENDIF} 2011-Dec-19 01:54:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 44 {IF LSTSLEW(AGES3193_p3_042) < 105041 THEN} 2011-Dec-19 01:54:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 45 {FIXEDDRIFT az=110.85 alfaangle=-89.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_042 ra=95300.00 dec=225130.00} 2011-Dec-19 01:54:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 48 {ENDIF} 2011-Dec-19 01:54:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 55 {LOAD togs_cima31.conf} 2011-Dec-19 01:54:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 56 {TRACKCURPOS} 2011-Dec-19 01:54:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 57 {ALFAANGLE 19} 2011-Dec-19 01:54:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 61 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2011-Dec-19 01:54:26 COMMAND CIMA-send_to_exec: Sending command to run command file 2011-Dec-19 01:54:26 LOG4 exec_msg: From OBSERVER: run_command_file 111219morning.cmd 1 1 25 2011-Dec-19 01:54:26 LOG4 run_command_file: Calling 'run_command_file 111219morning.cmd 1 1 25' 2011-Dec-19 01:54:26 BEGIN begin_task: Starting task 'running command file '111219morning.cmd'' 2011-Dec-19 01:54:26 LOG5 begin_task: Level: (1) ID = <10054> Status = 0 0 0 0 ok 2011-Dec-19 01:54:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '111219morning.cmd' ...} 2011-Dec-19 01:54:26 NOTE run_command_file: Starting execution of command file '111219morning.cmd' from line 1 2011-Dec-19 01:54:26 COMMAND run_command_line: EXECUTING command 4: 'LOAD ages_mock.conf' 2011-Dec-19 01:54:26 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2011-Dec-19 01:54:26 ERROR exec_msg: ERROR Executive is busy with task: 'running command file '111219morning.cmd''! 2011-Dec-19 01:54:26 ERROR exec_msg: ERROR rejecting new command! 2011-Dec-19 01:54:26 ALERT exec_msg: Send the command again once the executive is idle! 2011-Dec-19 01:54:26 LOG1 exec_msg: Executive busy - skipped 'store_command_file_line 1 4 {LOAD ages_mock.conf}' 2011-Dec-19 01:54:26 ERROR exec_msg: ERROR Executive is busy with task: 'running command file '111219morning.cmd''! 2011-Dec-19 01:54:26 ERROR exec_msg: ERROR rejecting new command! 2011-Dec-19 01:54:26 ALERT exec_msg: Send the command again once the executive is idle! 2011-Dec-19 01:54:26 LOG1 exec_msg: Executive busy - skipped 'store_command_file_line 2 5 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5}' 2011-Dec-19 01:54:26 ERROR exec_msg: ERROR Executive is busy with task: 'running command file '111219morning.cmd''! 2011-Dec-19 01:54:26 ERROR exec_msg: ERROR rejecting new command! 2011-Dec-19 01:54:26 ALERT exec_msg: Send the command again once the executive is idle! 2011-Dec-19 01:54:26 LOG1 exec_msg: Executive busy - skipped 'store_command_file_line 3 6 {CATALOG AGESFull.cat}' 2011-Dec-19 01:54:26 ERROR exec_msg: ERROR Executive is busy with task: 'running command file '111219morning.cmd''! 2011-Dec-19 01:54:26 ERROR exec_msg: ERROR rejecting new command! 2011-Dec-19 01:54:26 ALERT exec_msg: Send the command again once the executive is idle! 2011-Dec-19 01:54:26 LOG1 exec_msg: Executive busy - skipped 'store_command_file_line 4 9 {IF LSTSLEW(AGES3193_p3_032) < 085041 THEN}' 2011-Dec-19 01:54:26 ERROR exec_msg: ERROR Executive is busy with task: 'running command file '111219morning.cmd''! 2011-Dec-19 01:54:26 ERROR exec_msg: ERROR rejecting new command! 2011-Dec-19 01:54:26 ALERT exec_msg: Send the command again once the executive is idle! 2011-Dec-19 01:54:26 LOG1 exec_msg: Executive busy - skipped 'store_command_file_line 5 10 {FIXEDDRIFT az=249.64 alfaangle=-53.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_032 ra=95300.00 dec=230630.00}' 2011-Dec-19 01:54:26 ERROR exec_msg: ERROR Executive is busy with task: 'running command file '111219morning.cmd''! 2011-Dec-19 01:54:26 ERROR exec_msg: ERROR rejecting new command! 2011-Dec-19 01:54:26 ALERT exec_msg: Send the command again once the executive is idle! 2011-Dec-19 01:54:26 LOG1 exec_msg: Executive busy - skipped 'store_command_file_line 6 13 {ENDIF}' 2011-Dec-19 01:54:26 ERROR exec_msg: ERROR Executive is busy with task: 'running command file '111219morning.cmd''! 2011-Dec-19 01:54:26 ERROR exec_msg: ERROR rejecting new command! 2011-Dec-19 01:54:26 ALERT exec_msg: Send the command again once the executive is idle! 2011-Dec-19 01:54:26 LOG1 exec_msg: Executive busy - skipped 'store_command_file_line 7 16 {IF LSTSLEW(AGES3193_p3_034) < 091411 THEN}' 2011-Dec-19 01:54:26 ERROR exec_msg: ERROR Executive is busy with task: 'running command file '111219morning.cmd''! 2011-Dec-19 01:54:26 ERROR exec_msg: ERROR rejecting new command! 2011-Dec-19 01:54:26 ALERT exec_msg: Send the command again once the executive is idle! 2011-Dec-19 01:54:26 LOG1 exec_msg: Executive busy - skipped 'store_command_file_line 8 17 {FIXEDDRIFT az=241.63 alfaangle=-42.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_034 ra=95300.00 dec=230330.00}' 2011-Dec-19 01:54:26 ERROR exec_msg: ERROR Executive is busy with task: 'running command file '111219morning.cmd''! 2011-Dec-19 01:54:26 ERROR exec_msg: ERROR rejecting new command! 2011-Dec-19 01:54:26 ALERT exec_msg: Send the command again once the executive is idle! 2011-Dec-19 01:54:26 LOG1 exec_msg: Executive busy - skipped 'store_command_file_line 9 20 {ENDIF}' 2011-Dec-19 01:54:27 ERROR exec_msg: ERROR Executive is busy with task: 'running command file '111219morning.cmd''! 2011-Dec-19 01:54:27 ERROR exec_msg: ERROR rejecting new command! 2011-Dec-19 01:54:27 ALERT exec_msg: Send the command again once the executive is idle! 2011-Dec-19 01:54:27 LOG1 exec_msg: Executive busy - skipped 'store_command_file_line 10 23 {IF LSTSLEW(AGES3193_p3_036) < 093741 THEN}' 2011-Dec-19 01:54:27 ERROR exec_msg: ERROR Executive is busy with task: 'running command file '111219morning.cmd''! 2011-Dec-19 01:54:27 ERROR exec_msg: ERROR rejecting new command! 2011-Dec-19 01:54:27 ALERT exec_msg: Send the command again once the executive is idle! 2011-Dec-19 01:54:27 LOG1 exec_msg: Executive busy - skipped 'store_command_file_line 11 24 {FIXEDDRIFT az=218.49 alfaangle=-16.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_036 ra=95300.00 dec=230030.00}' 2011-Dec-19 01:54:27 ERROR exec_msg: ERROR Executive is busy with task: 'running command file '111219morning.cmd''! 2011-Dec-19 01:54:27 ERROR exec_msg: ERROR rejecting new command! 2011-Dec-19 01:54:27 ALERT exec_msg: Send the command again once the executive is idle! 2011-Dec-19 01:54:27 LOG1 exec_msg: Executive busy - skipped 'store_command_file_line 12 27 {ENDIF}' 2011-Dec-19 01:54:27 ERROR exec_msg: ERROR Executive is busy with task: 'running command file '111219morning.cmd''! 2011-Dec-19 01:54:27 ERROR exec_msg: ERROR rejecting new command! 2011-Dec-19 01:54:27 ALERT exec_msg: Send the command again once the executive is idle! 2011-Dec-19 01:54:27 LOG1 exec_msg: Executive busy - skipped 'store_command_file_line 13 30 {IF LSTSLEW(AGES3193_p3_038) < 100341 THEN}' 2011-Dec-19 01:54:27 ERROR exec_msg: ERROR Executive is busy with task: 'running command file '111219morning.cmd''! 2011-Dec-19 01:54:27 ERROR exec_msg: ERROR rejecting new command! 2011-Dec-19 01:54:27 ALERT exec_msg: Send the command again once the executive is idle! 2011-Dec-19 01:54:27 LOG1 exec_msg: Executive busy - skipped 'store_command_file_line 14 31 {FIXEDDRIFT az=153.19 alfaangle=43.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_038 ra=95300.00 dec=225730.00}' 2011-Dec-19 01:54:27 ERROR exec_msg: ERROR Executive is busy with task: 'running command file '111219morning.cmd''! 2011-Dec-19 01:54:27 ERROR exec_msg: ERROR rejecting new command! 2011-Dec-19 01:54:27 ALERT exec_msg: Send the command again once the executive is idle! 2011-Dec-19 01:54:27 LOG1 exec_msg: Executive busy - skipped 'store_command_file_line 15 34 {ENDIF}' 2011-Dec-19 01:54:27 ERROR exec_msg: ERROR Executive is busy with task: 'running command file '111219morning.cmd''! 2011-Dec-19 01:54:27 ERROR exec_msg: ERROR rejecting new command! 2011-Dec-19 01:54:27 ALERT exec_msg: Send the command again once the executive is idle! 2011-Dec-19 01:54:27 LOG1 exec_msg: Executive busy - skipped 'store_command_file_line 16 37 {IF LSTSLEW(AGES3193_p3_040) < 102711 THEN}' 2011-Dec-19 01:54:27 ERROR exec_msg: ERROR Executive is busy with task: 'running command file '111219morning.cmd''! 2011-Dec-19 01:54:27 ERROR exec_msg: ERROR rejecting new command! 2011-Dec-19 01:54:27 ALERT exec_msg: Send the command again once the executive is idle! 2011-Dec-19 01:54:27 LOG1 exec_msg: Executive busy - skipped 'store_command_file_line 17 38 {FIXEDDRIFT az=121.25 alfaangle=77.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_040 ra=95300.00 dec=225430.00}' 2011-Dec-19 01:54:27 ERROR exec_msg: ERROR Executive is busy with task: 'running command file '111219morning.cmd''! 2011-Dec-19 01:54:27 ERROR exec_msg: ERROR rejecting new command! 2011-Dec-19 01:54:27 ALERT exec_msg: Send the command again once the executive is idle! 2011-Dec-19 01:54:27 LOG1 exec_msg: Executive busy - skipped 'store_command_file_line 18 41 {ENDIF}' 2011-Dec-19 01:54:27 ERROR exec_msg: ERROR Executive is busy with task: 'running command file '111219morning.cmd''! 2011-Dec-19 01:54:27 ERROR exec_msg: ERROR rejecting new command! 2011-Dec-19 01:54:27 ALERT exec_msg: Send the command again once the executive is idle! 2011-Dec-19 01:54:27 LOG1 exec_msg: Executive busy - skipped 'store_command_file_line 19 44 {IF LSTSLEW(AGES3193_p3_042) < 105041 THEN}' 2011-Dec-19 01:54:27 ERROR exec_msg: ERROR Executive is busy with task: 'running command file '111219morning.cmd''! 2011-Dec-19 01:54:27 ERROR exec_msg: ERROR rejecting new command! 2011-Dec-19 01:54:27 ALERT exec_msg: Send the command again once the executive is idle! 2011-Dec-19 01:54:27 LOG1 exec_msg: Executive busy - skipped 'store_command_file_line 20 45 {FIXEDDRIFT az=110.85 alfaangle=-89.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_042 ra=95300.00 dec=225130.00}' 2011-Dec-19 01:54:27 ERROR exec_msg: ERROR Executive is busy with task: 'running command file '111219morning.cmd''! 2011-Dec-19 01:54:27 ERROR exec_msg: ERROR rejecting new command! 2011-Dec-19 01:54:27 ALERT exec_msg: Send the command again once the executive is idle! 2011-Dec-19 01:54:27 LOG1 exec_msg: Executive busy - skipped 'store_command_file_line 21 48 {ENDIF}' 2011-Dec-19 01:54:27 ERROR exec_msg: ERROR Executive is busy with task: 'running command file '111219morning.cmd''! 2011-Dec-19 01:54:27 ERROR exec_msg: ERROR rejecting new command! 2011-Dec-19 01:54:28 ALERT exec_msg: Send the command again once the executive is idle! 2011-Dec-19 01:54:28 LOG1 exec_msg: Executive busy - skipped 'store_command_file_line 22 55 {LOAD togs_cima31.conf}' 2011-Dec-19 01:54:28 ERROR exec_msg: ERROR Executive is busy with task: 'running command file '111219morning.cmd''! 2011-Dec-19 01:54:28 ERROR exec_msg: ERROR rejecting new command! 2011-Dec-19 01:54:28 ALERT exec_msg: Send the command again once the executive is idle! 2011-Dec-19 01:54:28 LOG1 exec_msg: Executive busy - skipped 'store_command_file_line 23 56 {TRACKCURPOS}' 2011-Dec-19 01:54:28 ERROR exec_msg: ERROR Executive is busy with task: 'running command file '111219morning.cmd''! 2011-Dec-19 01:54:28 ERROR exec_msg: ERROR rejecting new command! 2011-Dec-19 01:54:28 ALERT exec_msg: Send the command again once the executive is idle! 2011-Dec-19 01:54:28 LOG1 exec_msg: Executive busy - skipped 'store_command_file_line 24 57 {ALFAANGLE 19}' 2011-Dec-19 01:54:28 ERROR exec_msg: ERROR Executive is busy with task: 'running command file '111219morning.cmd''! 2011-Dec-19 01:54:28 ERROR exec_msg: ERROR rejecting new command! 2011-Dec-19 01:54:28 ALERT exec_msg: Send the command again once the executive is idle! 2011-Dec-19 01:54:28 LOG1 exec_msg: Executive busy - skipped 'store_command_file_line 25 61 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}}' 2011-Dec-19 01:54:28 COMMAND CIMA-send_to_exec: Sending command to run command file 2011-Dec-19 01:54:28 ERROR exec_msg: ERROR Executive is busy with task: 'running command file '111219morning.cmd''! 2011-Dec-19 01:54:28 ERROR exec_msg: ERROR rejecting new command! 2011-Dec-19 01:54:28 ALERT exec_msg: Send the command again once the executive is idle! 2011-Dec-19 01:54:28 LOG1 exec_msg: Executive busy - skipped 'run_command_file 111219morning.cmd 1 1 25' 2011-Dec-19 01:54:28 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-19 01:54:28 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2011-Dec-19 01:54:28 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock.conf' 2011-Dec-19 01:54:28 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2011-Dec-19 01:54:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2011-Dec-19 01:54:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2011-Dec-19 01:54:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2011-Dec-19 01:54:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2011-Dec-19 01:54:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2011-Dec-19 01:54:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2011-Dec-19 01:54:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2011-Dec-19 01:54:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2011-Dec-19 01:54:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2011-Dec-19 01:54:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled1) "1" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled2) "0" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards1) "both" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards2) "both" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode1) "spectra" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode2) "spectra" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg1) "2-pol" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg2) "2-pol" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits1) "32" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits2) "32" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor1) "1" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor2) "1" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset1) "0.0" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset2) "0.0" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags1) "8192" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags2) "8192" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs1) "1000.0" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs2) "1000.0" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad1) "1" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad2) "0" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors1) "13" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors2) "0" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors1) "0" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors2) "0" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors1) "0" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors2) "0" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors1) "0" 2011-Dec-19 01:54:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors2) "0" 2011-Dec-19 01:54:31 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype1) "fits" 2011-Dec-19 01:54:31 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype2) "fits" 2011-Dec-19 01:54:31 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2011-Dec-19 01:54:31 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2011-Dec-19 01:54:31 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2011-Dec-19 01:54:31 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2011-Dec-19 01:54:31 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2011-Dec-19 01:54:31 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2011-Dec-19 01:54:31 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2011-Dec-19 01:54:31 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2011-Dec-19 01:54:31 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2011-Dec-19 01:54:31 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-19 01:54:31 BEGIN begin_task: Starting task 'configuring IF/LO path' 2011-Dec-19 01:54:31 LOG5 begin_task: Level: (2) ID = <10055> Status = 0 0 0 0 ok 2011-Dec-19 01:54:31 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2011-Dec-19 01:54:31 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2011-Dec-19 01:54:31 LOG1 config_iflo: Receiver ALFA already selected 2011-Dec-19 01:54:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-19 01:54:31 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-19 01:54:31 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-19 01:54:31 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2011-Dec-19 01:54:31 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-19 01:54:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-19 01:54:31 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2011-Dec-19 01:54:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-19 01:54:31 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-19 01:54:31 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2011-Dec-19 01:54:31 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2011-Dec-19 01:54:31 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2011-Dec-19 01:54:31 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2011-Dec-19 01:54:31 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2011-Dec-19 01:54:31 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2011-Dec-19 01:54:31 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2011-Dec-19 01:54:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2011-Dec-19 01:54:31 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2011-Dec-19 01:54:31 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2011-Dec-19 01:54:31 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2011-Dec-19 01:54:31 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2011-Dec-19 01:54:31 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2011-Dec-19 01:54:31 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2011-Dec-19 01:54:31 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2011-Dec-19 01:54:31 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2011-Dec-19 01:54:31 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2011-Dec-19 01:54:31 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2011-Dec-19 01:54:31 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2011-Dec-19 01:54:31 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2011-Dec-19 01:54:31 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2011-Dec-19 01:54:31 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2011-Dec-19 01:54:31 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2011-Dec-19 01:54:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 01:54:31 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2011-Dec-19 01:54:31 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2011-Dec-19 01:54:31 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2011-Dec-19 01:54:31 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2011-Dec-19 01:54:31 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2011-Dec-19 01:54:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2011-Dec-19 01:54:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 01:54:31 START begin_task: Starting task 'waiting on configuring IF/LO path' 2011-Dec-19 01:54:31 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2011-Dec-19 01:54:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2011-Dec-19 01:54:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2011-Dec-19 01:54:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 01:54:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 01:54:31 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:54:31 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:54:31 LOG4 got_cormsg: From DATATAKING: vw% DONE 2011-Dec-19 01:54:31 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2011-Dec-19 01:54:31 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2011-Dec-19 01:54:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2011-Dec-19 01:54:31 STOP finish_task: Finishing task 'configuring IF/LO path' 2011-Dec-19 01:54:31 LOG5 finish_task: Level: (2) ID = <10055> Status = 0 0 0 0 ok 2011-Dec-19 01:54:31 DONE finish_task: DONE finished configuration: IF/LO path 2011-Dec-19 01:54:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-19 01:54:32 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2011-Dec-19 01:54:32 LOG5 end_task: Level: (2) ID = <10055> Status = 0 0 0 0 ok 2011-Dec-19 01:54:32 BEGIN begin_task: Starting task 'configuring WAPPs' 2011-Dec-19 01:54:32 LOG5 begin_task: Level: (2) ID = <10058> Status = 0 0 0 0 ok 2011-Dec-19 01:54:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2011-Dec-19 01:54:32 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2011-Dec-19 01:54:32 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Dec-19 01:54:32 START begin_task: Starting task 'selecting calibration port' 2011-Dec-19 01:54:32 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2011-Dec-19 01:54:32 LOG3 vw_send: To DATATAKING: calport 3 2011-Dec-19 01:54:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Dec-19 01:54:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 01:54:32 START begin_task: Starting task 'waiting on calport' 2011-Dec-19 01:54:32 LOG5 begin_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2011-Dec-19 01:54:32 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:54:32 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Dec-19 01:54:32 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 01:54:32 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:54:32 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-19 01:54:32 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Dec-19 01:54:32 LOG5 end_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2011-Dec-19 01:54:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Dec-19 01:54:32 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Dec-19 01:54:32 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2011-Dec-19 01:54:32 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-19 01:54:32 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-19 01:54:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-19 01:54:32 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2011-Dec-19 01:54:32 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:54:32 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-19 01:54:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-19 01:54:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-19 01:54:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-19 01:54:32 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2011-Dec-19 01:54:32 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2011-Dec-19 01:54:32 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2011-Dec-19 01:54:32 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2011-Dec-19 01:54:32 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2011-Dec-19 01:54:32 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2011-Dec-19 01:54:32 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2011-Dec-19 01:54:32 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2011-Dec-19 01:54:32 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2011-Dec-19 01:54:32 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Edwin 2011-Dec-19 01:54:32 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Edwin 2011-Dec-19 01:54:32 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Edwin 2011-Dec-19 01:54:32 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Edwin 2011-Dec-19 01:54:32 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Dec-19 01:54:32 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Dec-19 01:54:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-19 01:54:32 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2011-Dec-19 01:54:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2011-Dec-19 01:54:33 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-19 01:54:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2011-Dec-19 01:54:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-19 01:54:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Edwin' 2011-Dec-19 01:54:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-19 01:54:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-19 01:54:33 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2011-Dec-19 01:54:33 LOG3 sock_errsend: To WAPPDATA: FLUSH 2011-Dec-19 01:54:33 STOP finish_task: Finishing task 'configuring WAPPs' 2011-Dec-19 01:54:33 LOG5 finish_task: Level: (2) ID = <10058> Status = 0 0 0 0 ok 2011-Dec-19 01:54:33 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2011-Dec-19 01:54:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-19 01:54:33 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2011-Dec-19 01:54:33 LOG5 end_task: Level: (2) ID = <10058> Status = 0 0 0 0 ok 2011-Dec-19 01:54:33 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2011-Dec-19 01:54:33 LOG5 begin_task: Level: (2) ID = <10063> Status = 0 0 0 0 ok 2011-Dec-19 01:54:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2011-Dec-19 01:54:33 INFO1 config_mock: Starting to configure the Mock spectrometer 2011-Dec-19 01:54:33 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Dec-19 01:54:33 START begin_task: Starting task 'selecting calibration port' 2011-Dec-19 01:54:33 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2011-Dec-19 01:54:33 LOG3 vw_send: To DATATAKING: calport 3 2011-Dec-19 01:54:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Dec-19 01:54:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 01:54:33 START begin_task: Starting task 'waiting on calport' 2011-Dec-19 01:54:33 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2011-Dec-19 01:54:33 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2011-Dec-19 01:54:33 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Dec-19 01:54:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 01:54:33 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:54:33 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-19 01:54:33 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Dec-19 01:54:33 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2011-Dec-19 01:54:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Dec-19 01:54:33 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Dec-19 01:54:33 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2011-Dec-19 01:54:33 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-19 01:54:33 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-19 01:54:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-19 01:54:33 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2011-Dec-19 01:54:33 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-19 01:54:33 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:54:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-19 01:54:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-19 01:54:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-19 01:54:33 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2011-Dec-19 01:54:33 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Dec-19 01:54:33 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Dec-19 01:54:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-19 01:54:33 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2011-Dec-19 01:54:33 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-19 01:54:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-19 01:54:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-19 01:54:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-19 01:54:33 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2011-Dec-19 01:54:33 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2011-Dec-19 01:54:33 LOG3 socket_wait: To MOCK: NOP 2011-Dec-19 01:54:33 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2011-Dec-19 01:54:33 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2011-Dec-19 01:54:34 ALERT got_mock_message: Mock spectrometer restarting 2011-Dec-19 01:54:34 LOG4 from_mock: From MOCK: nop ok 2011-Dec-19 01:54:34 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2011-Dec-19 01:54:34 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2011-Dec-19 01:54:34 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2011-Dec-19 01:54:34 LOG2 config_mock: Mock spectrometer configuration group 1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2011-Dec-19 01:54:34 LOG2 config_mock: Mock spectrometer configuration group 1 (0): datatype=AB 2011-Dec-19 01:54:34 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bits=32 2011-Dec-19 01:54:34 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bwmhz=172.032 2011-Dec-19 01:54:34 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevif1hz=250000000 2011-Dec-19 01:54:34 LOG2 config_mock: Mock spectrometer configuration group 1 (0): digfreqoffhz=0.0 2011-Dec-19 01:54:34 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fftlen=8192 2011-Dec-19 01:54:34 LOG2 config_mock: Mock spectrometer configuration group 1 (0): dumptmsec=1.0 2011-Dec-19 01:54:34 LOG2 config_mock: Mock spectrometer configuration group 1 (0): blankatod=1 2011-Dec-19 01:54:34 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskadc=13 2011-Dec-19 01:54:34 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskpfb=0 2011-Dec-19 01:54:34 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskacc=0 2011-Dec-19 01:54:34 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskash=0 2011-Dec-19 01:54:34 LOG2 config_mock: Mock spectrometer configuration group 1 (0): adcclkhz=172032000 2011-Dec-19 01:54:34 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevlohz=175000000 325000000 2011-Dec-19 01:54:34 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fileprefix=a2048 2011-Dec-19 01:54:34 LOG2 config_mock: Mock spectrometer configuration group 1 (0): maxfilesizemb=2048 2011-Dec-19 01:54:34 LOG2 config_mock: Mock spectrometer configuration group 1 (0): calctl=c0 2011-Dec-19 01:54:34 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group 1' using string 'conf' 2011-Dec-19 01:54:34 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bits=32:bwmhz=172.032:pdevif1hz=250000000:digfreqoffhz=0.0:fftlen=8192:dumptmsec=1.0:blankatod=1:emaskadc=13:emaskpfb=0:emaskacc=0:emaskash=0:adcclkhz=172032000:pdevlohz=175000000 325000000:fileprefix=a2048:maxfilesizemb=2048:calctl=c0 2011-Dec-19 01:54:34 START begin_task: Starting task 'waiting on configure Mock spectrometer group 1' 2011-Dec-19 01:54:34 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2011-Dec-19 01:54:34 LOG4 from_mock: From MOCK: confok 2011-Dec-19 01:54:34 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group 1' with status 'OK' 2011-Dec-19 01:54:34 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2011-Dec-19 01:54:34 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group 1' 2011-Dec-19 01:54:34 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group 2' using string 'conf' 2011-Dec-19 01:54:34 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2011-Dec-19 01:54:34 START begin_task: Starting task 'waiting on disable Mock spectrometer group 2' 2011-Dec-19 01:54:34 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2011-Dec-19 01:54:34 LOG4 from_mock: From MOCK: confok 2011-Dec-19 01:54:34 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group 2' with status 'OK' 2011-Dec-19 01:54:34 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2011-Dec-19 01:54:34 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group 2' 2011-Dec-19 01:54:34 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2011-Dec-19 01:54:34 LOG5 finish_task: Level: (2) ID = <10063> Status = 0 0 0 0 ok 2011-Dec-19 01:54:34 DONE finish_task: DONE finished configuring: the Mock spectrometer 2011-Dec-19 01:54:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-19 01:54:34 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2011-Dec-19 01:54:34 LOG5 end_task: Level: (2) ID = <10063> Status = 0 0 0 0 ok 2011-Dec-19 01:54:34 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2011-Dec-19 01:54:34 COMMAND run_command_line: EXECUTING command 5: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2011-Dec-19 01:54:34 COMMAND run_command_line: EXECUTING command 6: 'CATALOG AGESFull.cat' 2011-Dec-19 01:54:34 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2011-Dec-19 01:54:34 COMMAND run_command_line: EXECUTING command 9: 'IF LSTSLEW(AGES3193_p3_032) < 085041 THEN' 2011-Dec-19 01:54:35 LOG3 is_if_valid: Current source data: down 255.8 36.7 74 - - 237 3.9 2011-Dec-19 01:54:35 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_032) < 085041 2011-Dec-19 01:54:35 INFO5 is_if_valid: Condition parsed as: 7.3567800000000005 < 8.8447222222222219 2011-Dec-19 01:54:35 COMMAND run_command_line: EXECUTING command 10: 'FIXEDDRIFT az=249.64 alfaangle=-53.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_032 ra=95300.00 dec=230630.00' 2011-Dec-19 01:54:35 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-19 01:54:35 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-19 01:54:35 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 249.64 -53.8 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_032 95300.00 230630.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-19 01:54:35 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-19 01:54:35 LOG5 begin_task: Level: (2) ID = <10071> Status = 0 0 0 0 ok 2011-Dec-19 01:54:35 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'Cur-pos' 2011-Dec-19 01:54:35 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-19 01:54:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_032} 2011-Dec-19 01:54:35 INFO3 fixed_driftmap: Sending telescope to Az = 249.64 and ZA = 15.46 2011-Dec-19 01:54:35 LOG3 track_source: Calling 'track_source AGES3193_p3_032 249.64 15.4557883914 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-19 01:54:35 START begin_task: Starting task 'sending tracking commands' 2011-Dec-19 01:54:35 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2011-Dec-19 01:54:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_032} INFO {Slewing to source 'AGES3193_p3_032' ...} 2011-Dec-19 01:54:35 INFO1 track_source: Starting to track AGES3193_p3_032 2011-Dec-19 01:54:35 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_032" 2011-Dec-19 01:54:35 LOG3 vw_send: To DATATAKING: set ra 249.64 2011-Dec-19 01:54:35 LOG3 vw_send: To DATATAKING: set dec 15.4557883914 2011-Dec-19 01:54:35 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-19 01:54:35 LOG3 vw_send: To DATATAKING: pnt tr 249.64 15.4557883914 -CF 2011-Dec-19 01:54:35 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 01:54:36 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-19 01:54:36 LOG5 finish_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2011-Dec-19 01:54:36 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-19 01:54:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 01:54:36 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-19 01:54:36 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2011-Dec-19 01:54:36 START begin_task: Starting task 'rotate ALFA to -53.8 degrees' 2011-Dec-19 01:54:36 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2011-Dec-19 01:54:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -53.8 degrees ...} 2011-Dec-19 01:54:36 INFO2 rotate_alfa: ALFA commanded to -53.8 degrees 2011-Dec-19 01:54:36 LOG3 sock_errsend: To ALFAMOTOR: POSITION -53.8 REPLY 2011-Dec-19 01:54:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-19 01:54:36 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-19 01:54:36 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2011-Dec-19 01:54:36 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_032" 2011-Dec-19 01:54:36 LOG4 got_cormsg: From DATATAKING: set ra 249.64 2011-Dec-19 01:54:36 LOG4 got_cormsg: From DATATAKING: set dec 15.4557883914 2011-Dec-19 01:54:36 LOG4 got_cormsg: From DATATAKING: vw% 249.64 2011-Dec-19 01:54:36 LOG4 got_cormsg: From DATATAKING: vw% 15.4557883914 2011-Dec-19 01:54:36 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:54:36 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-19 01:54:36 LOG4 got_cormsg: From DATATAKING: pnt tr 249.64 15.4557883914 -CF 2011-Dec-19 01:54:36 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 01:54:36 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-19 01:54:36 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:55:17 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-19 01:55:17 INFO3 alfa_motor: ALFA rotator in-position -53.80 degrees 2011-Dec-19 01:55:17 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-19 01:55:17 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2011-Dec-19 01:55:17 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-19 01:55:17 STOP finish_task: Finishing task 'rotate ALFA to -53.8 degrees' 2011-Dec-19 01:55:17 LOG5 finish_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2011-Dec-19 01:55:17 INFO2 finish_task: DONE finished configuration: rotating ALFA to -53.8 degrees 2011-Dec-19 01:55:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 01:55:17 STOP end_task: Finishing task 'rotate ALFA to -53.8 degrees' with status 'OK' 2011-Dec-19 01:55:17 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2011-Dec-19 01:55:17 START begin_task: Starting task 'waiting on telescope' 2011-Dec-19 01:55:17 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2011-Dec-19 01:55:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-19 01:55:17 LOG3 waittrk: Start waittrk 5 2011-Dec-19 01:55:17 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-19 01:55:17 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2011-Dec-19 01:55:22 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-19 01:55:22 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2011-Dec-19 01:55:22 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-19 01:55:22 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2011-Dec-19 01:56:52 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-19 01:56:52 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2011-Dec-19 01:56:52 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-19 01:56:52 INFO2 waittrk: Now tracking AGES3193_p3_032 2011-Dec-19 01:56:52 LOG4 waittrk: Current telescope position: Az = 249.22 ZA = 15.47 2011-Dec-19 01:56:52 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-19 01:56:52 LOG5 finish_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2011-Dec-19 01:56:52 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-19 01:56:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 01:56:52 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-19 01:56:52 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2011-Dec-19 01:56:52 START begin_task: Starting task 'selecting calibration type' 2011-Dec-19 01:56:52 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2011-Dec-19 01:56:52 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-19 01:56:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-19 01:56:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 01:56:52 START begin_task: Starting task 'waiting on setcal' 2011-Dec-19 01:56:52 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2011-Dec-19 01:56:53 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-19 01:56:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 01:56:53 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:56:53 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-19 01:56:53 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-19 01:56:53 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2011-Dec-19 01:56:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-19 01:56:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-19 01:56:53 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-19 01:56:53 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-19 01:56:53 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2011-Dec-19 01:56:53 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:56:53 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-19 01:56:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-19 01:56:53 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2011-Dec-19 01:56:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-19 01:56:53 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-19 01:56:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-19 01:56:53 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-19 01:56:53 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-19 01:56:53 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2011-Dec-19 01:56:53 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-19 01:56:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-19 01:56:53 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2011-Dec-19 01:56:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-19 01:56:53 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-19 01:56:53 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-19 01:56:53 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2011-Dec-19 01:56:53 LOG5 dopset_later: Calling 'dopset_later 0' 2011-Dec-19 01:56:53 INFO3 dopset_later: Setting Doppler correction now 2011-Dec-19 01:56:53 LOG5 antvel: Calling 'antvel 249.640000 15.455788 F Heliocentric 0' 2011-Dec-19 01:56:53 LOG2 antvel: Transforming current Az = 249.64 ZA = 15.46 to apparent RA = 08:22:50.9 Dec = +23:02:51.9 2011-Dec-19 01:56:53 LOG2 antvel: Parameters to Doppler: Heliocentric 21413 2011 353 0.0 2011-Dec-19 01:56:53 INFO5 antvel: Computed antenna velocity: -17.58939 km/s 2011-Dec-19 01:56:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-17.589385313200001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-19 01:56:53 INFO4 dopset_gen: New sky frequencies: 1381.324473 1381.324473 1381.324473 1381.324473 1381.324473 1381.324473 1381.324473 1381.324473 1381.324473 2011-Dec-19 01:56:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.324473 sky0=1381.324473 sky1=1381.324473 sky2=1381.324473 sky3=1381.324473 sky4=1381.324473 sky5=1381.324473 sky6=1381.324473 sky7=1381.324473 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-19 01:56:53 LOG2 dopset_gen: Result from 'sky2syn': 1631.324473 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-19 01:56:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631324473.0} 2011-Dec-19 01:56:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 01:56:53 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-19 01:56:53 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-19 01:56:53 INFO5 fixed_driftmap: Tracking J2000 position: RA = 08:22:11.6 Dec = +23:05:11.7 2011-Dec-19 01:56:53 LOG3 track_source: Calling 'track_source AGES3193_p3_032 082211.6 230511.7 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-19 01:56:53 START begin_task: Starting task 'sending tracking commands' 2011-Dec-19 01:56:53 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2011-Dec-19 01:56:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_032} INFO {Slewing to source 'AGES3193_p3_032' ...} 2011-Dec-19 01:56:53 INFO1 track_source: Starting to track AGES3193_p3_032 2011-Dec-19 01:56:53 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_032" 2011-Dec-19 01:56:53 LOG3 vw_send: To DATATAKING: set ra 082211.6 2011-Dec-19 01:56:53 LOG3 vw_send: To DATATAKING: set dec 230511.7 2011-Dec-19 01:56:53 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-19 01:56:53 LOG3 vw_send: To DATATAKING: pnt tr 082211.6 230511.7 -CJ 2011-Dec-19 01:56:53 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 01:56:53 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-19 01:56:53 LOG5 finish_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2011-Dec-19 01:56:53 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-19 01:56:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 01:56:53 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-19 01:56:53 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2011-Dec-19 01:56:53 START begin_task: Starting task 'waiting on telescope' 2011-Dec-19 01:56:53 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2011-Dec-19 01:56:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-19 01:56:53 LOG3 waittrk: Start waittrk 5 2011-Dec-19 01:56:53 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-19 01:56:53 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2011-Dec-19 01:56:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631324473.0} 2011-Dec-19 01:56:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 01:56:53 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:56:53 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_032" 2011-Dec-19 01:56:53 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:56:53 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:56:53 LOG4 got_cormsg: From DATATAKING: set ra 082211.6 2011-Dec-19 01:56:53 LOG4 got_cormsg: From DATATAKING: set dec 230511.7 2011-Dec-19 01:56:53 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-19 01:56:53 LOG4 got_cormsg: From DATATAKING: pnt tr 082211.6 230511.7 -CJ 2011-Dec-19 01:56:53 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 01:56:54 LOG4 got_cormsg: From DATATAKING: 082211.6 2011-Dec-19 01:56:54 LOG4 got_cormsg: From DATATAKING: vw% 230511.7 2011-Dec-19 01:56:54 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2011-Dec-19 01:56:58 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-19 01:56:58 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2011-Dec-19 01:56:58 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-19 01:56:58 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2011-Dec-19 01:57:01 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-19 01:57:01 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2011-Dec-19 01:57:01 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-19 01:57:01 INFO2 waittrk: Now tracking AGES3193_p3_032 2011-Dec-19 01:57:01 LOG4 waittrk: Current telescope position: Az = 249.22 ZA = 15.46 2011-Dec-19 01:57:01 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-19 01:57:01 LOG5 finish_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2011-Dec-19 01:57:01 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-19 01:57:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 01:57:01 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-19 01:57:01 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2011-Dec-19 01:57:01 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-19 01:57:01 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2011-Dec-19 01:57:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-19 01:57:01 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-19 01:57:01 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-19 01:57:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-19 01:57:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 01:57:01 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-19 01:57:01 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2011-Dec-19 01:57:01 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-19 01:57:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 01:57:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:57:04 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-19 01:57:04 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-19 01:57:04 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2011-Dec-19 01:57:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-19 01:57:04 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-19 01:57:04 LOG5 begin_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2011-Dec-19 01:57:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-19 01:57:04 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 01:57:04 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 01:57:04 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 01:57:04 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 01:57:04 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-19 01:57:04 LOG5 begin_task: Level: (5) ID = <10089> Status = 0 0 0 0 ok 2011-Dec-19 01:57:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-19 01:57:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:57:04 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 8 6 dB 2011-Dec-19 01:57:04 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 3 4 dB 2011-Dec-19 01:57:04 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 3 dB 2011-Dec-19 01:57:04 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2011-Dec-19 01:57:04 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-19 01:57:04 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-19 01:57:04 LOG5 end_task: Level: (5) ID = <10089> Status = 0 0 0 0 ok 2011-Dec-19 01:57:04 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.928 0.899 ALFA beam 1: 0.956 0.968 2011-Dec-19 01:57:04 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.986 1.037 ALFA beam 3: 0.911 0.955 2011-Dec-19 01:57:04 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.875 0.938 ALFA beam 5: 1.019 0.887 2011-Dec-19 01:57:04 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.966 0.014 ALFA beam 7: 1.052 0.014 2011-Dec-19 01:57:04 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-19 01:57:04 LOG5 finish_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2011-Dec-19 01:57:04 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-19 01:57:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 01:57:04 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-19 01:57:04 LOG5 end_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2011-Dec-19 01:57:04 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-19 01:57:04 LOG5 begin_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2011-Dec-19 01:57:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-19 01:57:04 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-19 01:57:04 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-19 01:57:04 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-19 01:57:04 LOG5 begin_task: Level: (5) ID = <10091> Status = 0 0 0 0 ok 2011-Dec-19 01:57:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 01:57:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 0.899 0.956 0.968 2011-Dec-19 01:57:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 1.037 0.911 0.955 2011-Dec-19 01:57:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.875 0.938 1.019 0.887 2011-Dec-19 01:57:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.966 0.014 1.052 0.014 2011-Dec-19 01:57:10 INFO3 from_mock: From MOCK: b0s0g0 rms:A 32.5 28.6 B 31.1 31.2 mn:A 0.2 0.1 B -0.3 -0.4 gn: 11 11 2011-Dec-19 01:57:10 INFO3 from_mock: From MOCK: b0s1g0 rms:A 33.0 31.6 B 29.1 30.8 mn:A 0.0 -0.4 B -0.5 0.2 gn: 12 11 2011-Dec-19 01:57:10 INFO3 from_mock: From MOCK: b1s0g0 rms:A 31.5 29.5 B 33.8 29.6 mn:A 0.4 0.7 B 0.1 -0.1 gn: 7 11 2011-Dec-19 01:57:10 INFO3 from_mock: From MOCK: b1s1g0 rms:A 31.0 28.6 B 28.7 28.7 mn:A -0.4 -0.3 B 0.5 0.0 gn: 8 9 2011-Dec-19 01:57:10 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.7 28.9 B 28.7 30.0 mn:A 0.0 -0.3 B 0.4 -0.1 gn: 10 11 2011-Dec-19 01:57:10 INFO3 from_mock: From MOCK: b2s1g0 rms:A 30.6 30.9 B 29.9 27.8 mn:A 0.3 -0.3 B 0.0 0.2 gn: 11 11 2011-Dec-19 01:57:10 INFO3 from_mock: From MOCK: b3s0g0 rms:A 30.1 29.9 B 32.1 28.7 mn:A 0.3 -0.3 B 0.1 -0.2 gn: 12 12 2011-Dec-19 01:57:10 INFO3 from_mock: From MOCK: b3s1g0 rms:A 31.5 30.8 B 30.8 32.1 mn:A -0.2 0.3 B 0.1 0.1 gn: 12 12 2011-Dec-19 01:57:10 INFO3 from_mock: From MOCK: b4s0g0 rms:A 31.1 30.2 B 28.8 28.9 mn:A -0.2 -0.3 B -0.4 -0.0 gn: 13 11 2011-Dec-19 01:57:10 INFO3 from_mock: From MOCK: b4s1g0 rms:A 30.2 27.4 B 31.3 30.2 mn:A -0.0 -0.1 B -0.4 0.1 gn: 15 13 2011-Dec-19 01:57:10 INFO3 from_mock: From MOCK: b5s0g0 rms:A 30.5 29.4 B 31.6 31.6 mn:A 0.3 0.4 B 0.0 0.4 gn: 12 11 2011-Dec-19 01:57:10 INFO3 from_mock: From MOCK: b5s1g0 rms:A 30.9 30.7 B 28.6 28.3 mn:A -0.4 0.2 B 0.0 0.2 gn: 12 10 2011-Dec-19 01:57:10 INFO3 from_mock: From MOCK: b6s0g0 rms:A 30.6 28.1 B 14.1 14.6 mn:A -0.5 0.1 B 0.3 -0.5 gn: 12 31 2011-Dec-19 01:57:10 INFO3 from_mock: From MOCK: b6s1g0 rms:A 31.4 28.5 B 11.2 10.8 mn:A 0.6 0.5 B 0.1 0.2 gn: 13 31 2011-Dec-19 01:57:10 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-19 01:57:10 LOG5 end_task: Level: (5) ID = <10091> Status = 0 0 0 0 ok 2011-Dec-19 01:57:10 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-19 01:57:10 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-19 01:57:10 LOG5 finish_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2011-Dec-19 01:57:10 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-19 01:57:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 01:57:10 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-19 01:57:10 LOG5 end_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2011-Dec-19 01:57:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-19 01:57:10 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-19 01:57:10 LOG5 finish_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2011-Dec-19 01:57:10 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-19 01:57:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 01:57:11 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-19 01:57:11 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2011-Dec-19 01:57:11 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Edwin 2011-Dec-19 01:57:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Edwin 2011-Dec-19 01:57:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Edwin 2011-Dec-19 01:57:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Edwin 2011-Dec-19 01:57:11 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-19 01:57:11 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-19 01:57:11 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2011-Dec-19 01:57:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-19 01:57:11 START begin_task: Starting task 'selecting calibration type' 2011-Dec-19 01:57:11 LOG5 begin_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2011-Dec-19 01:57:11 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-19 01:57:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-19 01:57:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 01:57:11 START begin_task: Starting task 'waiting on setcal' 2011-Dec-19 01:57:11 LOG5 begin_task: Level: (5) ID = <10094> Status = 0 0 0 0 ok 2011-Dec-19 01:57:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Edwin' 2011-Dec-19 01:57:11 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-19 01:57:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 01:57:11 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:57:11 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-19 01:57:11 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-19 01:57:11 LOG5 end_task: Level: (5) ID = <10094> Status = 0 0 0 0 ok 2011-Dec-19 01:57:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-19 01:57:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-19 01:57:11 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-19 01:57:11 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-19 01:57:11 LOG5 begin_task: Level: (5) ID = <10095> Status = 0 0 0 0 ok 2011-Dec-19 01:57:11 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:57:11 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-19 01:57:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-19 01:57:11 LOG5 end_task: Level: (5) ID = <10095> Status = 0 0 0 0 ok 2011-Dec-19 01:57:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-19 01:57:11 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-19 01:57:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-19 01:57:11 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-19 01:57:11 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-19 01:57:11 LOG5 begin_task: Level: (5) ID = <10096> Status = 0 0 0 0 ok 2011-Dec-19 01:57:11 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-19 01:57:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-19 01:57:11 LOG5 end_task: Level: (5) ID = <10096> Status = 0 0 0 0 ok 2011-Dec-19 01:57:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-19 01:57:11 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-19 01:57:11 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-19 01:57:11 LOG5 end_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2011-Dec-19 01:57:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-19 01:57:11 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-19 01:57:11 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-19 01:57:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-19 01:57:11 LOG5 begin_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2011-Dec-19 01:57:11 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-19 01:57:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-19 01:57:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-19 01:57:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-19 01:57:11 LOG5 end_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2011-Dec-19 01:57:11 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-19 01:57:11 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-19 01:57:11 LOG5 begin_task: Level: (4) ID = <10098> Status = 0 0 0 0 ok 2011-Dec-19 01:57:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-19 01:57:11 LOG5 log_alfabeam: Parameters: 8.3698888888888909 23.086583333333337 7.335510 2011.9666841268031 -53.800076 2011-Dec-19 01:57:11 LOG4 log_alfabeam: ALFABEAM 0 8.369888888888893 23.086583333333337 2011-Dec-19 01:57:11 LOG4 log_alfabeam: ALFABEAM 1 8.370754387387914 22.995800847581080 2011-Dec-19 01:57:11 LOG4 log_alfabeam: ALFABEAM 2 8.376920256684892 23.056190355309283 2011-Dec-19 01:57:11 LOG4 log_alfabeam: ALFABEAM 3 8.376032731224729 23.147495474625806 2011-Dec-19 01:57:11 LOG4 log_alfabeam: ALFABEAM 4 8.368983078680408 23.177358444672382 2011-Dec-19 01:57:11 LOG4 log_alfabeam: ALFABEAM 5 8.362852410817514 23.116289673592437 2011-Dec-19 01:57:11 LOG4 log_alfabeam: ALFABEAM 6 8.363736067362240 23.026036379176404 2011-Dec-19 01:57:11 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-19 01:57:11 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-19 01:57:11 LOG3 take_mock_data: PSET configuration: obsnm=Edwin 2011-Dec-19 01:57:11 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_032 2011-Dec-19 01:57:11 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-19 01:57:11 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-19 01:57:11 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-19 01:57:11 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-19 01:57:11 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-19 01:57:11 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-19 01:57:11 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-19 01:57:11 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-19 01:57:11 LOG3 take_mock_data: PSET configuration: patternid=135300001 2011-Dec-19 01:57:11 LOG3 take_mock_data: PSET configuration: scanid=135300010 2011-Dec-19 01:57:11 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-19 01:57:11 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-19 01:57:11 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-19 01:57:11 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456324473.0 2011-Dec-19 01:57:11 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306324473.0 2011-Dec-19 01:57:11 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-19 01:57:11 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-19 01:57:11 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Edwin:object=AGES3193_p3_032:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=135300001:scanid=135300010:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456324473.0:topobfreqhz=1306324473.0:filetype=1 2011-Dec-19 01:57:11 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-19 01:57:11 LOG5 begin_task: Level: (5) ID = <10099> Status = 0 0 0 0 ok 2011-Dec-19 01:57:11 LOG4 from_mock: From MOCK: psetok 2011-Dec-19 01:57:11 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-19 01:57:11 LOG5 end_task: Level: (5) ID = <10099> Status = 0 0 0 0 ok 2011-Dec-19 01:57:11 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-19 01:57:11 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-19 01:57:12 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-19 01:57:12 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-19 01:57:12 LOG5 begin_task: Level: (5) ID = <10100> Status = 0 0 0 0 ok 2011-Dec-19 01:57:12 NOTE WAPPDATA-new_file: New FITS file: wapp.20111219.a2048.0001.fits 2011-Dec-19 01:57:12 LOG4 from_mock: From MOCK: starok 2011-Dec-19 01:57:12 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-19 01:57:12 LOG5 end_task: Level: (5) ID = <10100> Status = 0 0 0 0 ok 2011-Dec-19 01:57:12 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-19 01:57:12 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135300010 2011-Dec-19 01:57:12 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-19 01:57:12 LOG5 begin_task: Level: (5) ID = <10101> Status = 0 0 0 0 ok 2011-Dec-19 01:57:12 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111219.a2048.0001.fits} 2011-Dec-19 01:57:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-19 01:57:12 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-19 01:57:12 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-19 01:57:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-19 01:57:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21433.00 2011-Dec-19 01:57:14 INFO2 got_mock_message: Mock spectrometer start file number is 00000 2011-Dec-19 01:57:14 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-19 01:57:14 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-19 01:57:14 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-19 01:57:14 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-19 01:57:14 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-19 01:57:14 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-19 01:57:14 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-19 01:57:14 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-19 01:57:14 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-19 01:57:14 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-19 01:57:14 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-19 01:57:14 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-19 01:57:14 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 01:57:14 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 01:57:14 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 01:57:14 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 01:57:14 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 01:57:14 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 01:57:14 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 01:57:17 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 01:57:17.01 2011-Dec-19 01:57:17 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324274237.01 Mon Dec 19 01:57:17 2011 2011-Dec-19 01:57:17 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-19 01:57:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.324473 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-19 01:57:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.324473 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:57:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.324473 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:57:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.324473 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:57:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.324473 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:57:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.324473 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 01:57:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.324473 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 01:57:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.324473 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-19 01:57:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.324473 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-19 01:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.453 (still bad) 2011-Dec-19 01:57:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-19 01:57:23 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-19 01:57:23 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-19 01:57:23 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-19 01:57:23 LOG5 end_task: Level: (5) ID = <10101> Status = 0 0 0 0 ok 2011-Dec-19 01:57:23 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-19 01:57:23 LOG5 end_task: Level: (4) ID = <10098> Status = 0 0 0 0 ok 2011-Dec-19 01:57:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-19 01:57:23 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-19 01:57:23 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-19 01:57:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-19 01:57:23 LOG5 begin_task: Level: (4) ID = <10102> Status = 0 0 0 0 ok 2011-Dec-19 01:57:23 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-19 01:57:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-19 01:57:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-19 01:57:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-19 01:57:23 LOG5 end_task: Level: (4) ID = <10102> Status = 0 0 0 0 ok 2011-Dec-19 01:57:23 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-19 01:57:23 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-19 01:57:23 LOG5 begin_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2011-Dec-19 01:57:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-19 01:57:23 LOG5 log_alfabeam: Parameters: 8.3698888888888909 23.086583333333337 7.338574 2011.9666844753719 -53.800076 2011-Dec-19 01:57:23 LOG4 log_alfabeam: ALFABEAM 0 8.369888888888893 23.086583333333333 2011-Dec-19 01:57:23 LOG4 log_alfabeam: ALFABEAM 1 8.370760922296350 22.995812857177132 2011-Dec-19 01:57:23 LOG4 log_alfabeam: ALFABEAM 2 8.376922459969856 23.056286758018572 2011-Dec-19 01:57:23 LOG4 log_alfabeam: ALFABEAM 3 8.376028283060213 23.147581002053183 2011-Dec-19 01:57:23 LOG4 log_alfabeam: ALFABEAM 4 8.368976426223872 23.177345858465259 2011-Dec-19 01:57:23 LOG4 log_alfabeam: ALFABEAM 5 8.362850256165608 23.116191477971505 2011-Dec-19 01:57:23 LOG4 log_alfabeam: ALFABEAM 6 8.363740448206570 23.025951896686337 2011-Dec-19 01:57:23 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-19 01:57:23 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-19 01:57:23 LOG3 take_mock_data: PSET configuration: obsnm=Edwin 2011-Dec-19 01:57:23 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_032 2011-Dec-19 01:57:23 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-19 01:57:23 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-19 01:57:23 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-19 01:57:23 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-19 01:57:23 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-19 01:57:23 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-19 01:57:23 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-19 01:57:23 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-19 01:57:23 LOG3 take_mock_data: PSET configuration: patternid=135300001 2011-Dec-19 01:57:23 LOG3 take_mock_data: PSET configuration: scanid=135300011 2011-Dec-19 01:57:23 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-19 01:57:23 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-19 01:57:23 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-19 01:57:23 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456324473.0 2011-Dec-19 01:57:23 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306324473.0 2011-Dec-19 01:57:23 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-19 01:57:23 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-19 01:57:23 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Edwin:object=AGES3193_p3_032:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=135300001:scanid=135300011:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456324473.0:topobfreqhz=1306324473.0:filetype=1 2011-Dec-19 01:57:23 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-19 01:57:23 LOG5 begin_task: Level: (5) ID = <10104> Status = 0 0 0 0 ok 2011-Dec-19 01:57:23 LOG4 from_mock: From MOCK: psetok 2011-Dec-19 01:57:23 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-19 01:57:23 LOG5 end_task: Level: (5) ID = <10104> Status = 0 0 0 0 ok 2011-Dec-19 01:57:23 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-19 01:57:23 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-19 01:57:23 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-19 01:57:23 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-19 01:57:23 LOG5 begin_task: Level: (5) ID = <10105> Status = 0 0 0 0 ok 2011-Dec-19 01:57:23 LOG4 from_mock: From MOCK: starok 2011-Dec-19 01:57:23 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-19 01:57:23 LOG5 end_task: Level: (5) ID = <10105> Status = 0 0 0 0 ok 2011-Dec-19 01:57:23 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-19 01:57:23 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135300011 2011-Dec-19 01:57:23 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-19 01:57:23 LOG5 begin_task: Level: (5) ID = <10106> Status = 0 0 0 0 ok 2011-Dec-19 01:57:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-19 01:57:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-19 01:57:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21444.00 2011-Dec-19 01:57:24 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-19 01:57:24 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-19 01:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.453 (still bad) 2011-Dec-19 01:57:26 INFO2 got_mock_message: Mock spectrometer start file number is 00100 2011-Dec-19 01:57:26 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-19 01:57:26 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-19 01:57:26 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-19 01:57:26 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-19 01:57:26 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-19 01:57:26 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-19 01:57:26 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-19 01:57:26 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-19 01:57:26 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-19 01:57:26 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-19 01:57:26 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-19 01:57:26 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-19 01:57:26 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 01:57:26 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 01:57:26 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 01:57:26 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 01:57:26 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 01:57:26 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 01:57:26 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 01:57:29 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 01:57:29.01 2011-Dec-19 01:57:29 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324274249.01 Mon Dec 19 01:57:29 2011 2011-Dec-19 01:57:29 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-19 01:57:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.324473 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-19 01:57:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.324473 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:57:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.324473 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:57:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.324473 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:57:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.324473 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:57:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.324473 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 01:57:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.324473 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 01:57:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.324473 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-19 01:57:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.324473 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-19 01:57:29 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-19 01:57:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-19 01:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.050 (still bad) 2011-Dec-19 01:57:34 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-19 01:57:35 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-19 01:57:35 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-19 01:57:35 LOG5 end_task: Level: (5) ID = <10106> Status = 0 0 0 0 ok 2011-Dec-19 01:57:35 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-19 01:57:35 LOG5 end_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2011-Dec-19 01:57:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-19 01:57:35 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-19 01:57:35 LOG5 finish_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2011-Dec-19 01:57:35 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-19 01:57:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 01:57:35 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-19 01:57:35 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2011-Dec-19 01:57:35 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-19 01:57:35 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 249.64 and ZA = 15.46 2011-Dec-19 01:57:35 LOG3 track_source: Calling 'track_source AGES3193_p3_032 249.64 15.4557883914 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-19 01:57:35 START begin_task: Starting task 'sending tracking commands' 2011-Dec-19 01:57:35 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2011-Dec-19 01:57:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_032} INFO {Slewing to source 'AGES3193_p3_032' ...} 2011-Dec-19 01:57:35 INFO1 track_source: Starting to track AGES3193_p3_032 2011-Dec-19 01:57:35 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_032" 2011-Dec-19 01:57:35 LOG3 vw_send: To DATATAKING: set ra 249.64 2011-Dec-19 01:57:35 LOG3 vw_send: To DATATAKING: set dec 15.4557883914 2011-Dec-19 01:57:35 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-19 01:57:35 LOG3 vw_send: To DATATAKING: pnt tr 249.64 15.4557883914 -CF 2011-Dec-19 01:57:35 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 01:57:35 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-19 01:57:35 LOG5 finish_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2011-Dec-19 01:57:35 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-19 01:57:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 01:57:35 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-19 01:57:35 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2011-Dec-19 01:57:35 LOG1 fixed_driftmap: Parameters: HA = -01:03:01.1 Start = 08:50:41.0 LST = 07:20:30.9 diff = 5410.1 secs 2011-Dec-19 01:57:35 WARNING fixed_driftmap: WARNING RA is more than 1 hour away --- starting anyway! 2011-Dec-19 01:57:35 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-19 01:57:35 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-19 01:57:35 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-19 01:57:35 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-19 01:57:35 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-19 01:57:35 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2011-Dec-19 01:57:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-19 01:57:35 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-19 01:57:35 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-19 01:57:35 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-19 01:57:35 LOG3 take_mock_data: PSET configuration: obsnm=Edwin 2011-Dec-19 01:57:35 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_032 2011-Dec-19 01:57:35 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-19 01:57:35 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-19 01:57:35 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-19 01:57:35 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-19 01:57:35 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-19 01:57:35 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-19 01:57:35 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-19 01:57:35 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-19 01:57:35 LOG3 take_mock_data: PSET configuration: patternid=135300012 2011-Dec-19 01:57:35 LOG3 take_mock_data: PSET configuration: scanid=135300012 2011-Dec-19 01:57:35 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-19 01:57:35 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-19 01:57:35 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-19 01:57:35 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456324473.0 2011-Dec-19 01:57:35 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306324473.0 2011-Dec-19 01:57:35 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-19 01:57:35 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-19 01:57:35 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Edwin:object=AGES3193_p3_032:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=135300012:scanid=135300012:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456324473.0:topobfreqhz=1306324473.0:filetype=1 2011-Dec-19 01:57:35 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-19 01:57:35 LOG5 begin_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2011-Dec-19 01:57:35 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_032" 2011-Dec-19 01:57:35 LOG4 got_cormsg: From DATATAKING: set ra 249.64 2011-Dec-19 01:57:35 LOG4 from_mock: From MOCK: psetok 2011-Dec-19 01:57:35 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-19 01:57:35 LOG5 end_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2011-Dec-19 01:57:35 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-19 01:57:35 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-19 01:57:35 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-19 01:57:35 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-19 01:57:35 LOG5 begin_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2011-Dec-19 01:57:35 LOG4 got_cormsg: From DATATAKING: set dec 15.4557883914 2011-Dec-19 01:57:35 LOG4 got_cormsg: From DATATAKING: vw% 249.64 2011-Dec-19 01:57:35 LOG4 from_mock: From MOCK: starok 2011-Dec-19 01:57:35 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-19 01:57:35 LOG5 end_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2011-Dec-19 01:57:35 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-19 01:57:35 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 135300012 2011-Dec-19 01:57:36 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-19 01:57:36 LOG5 begin_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2011-Dec-19 01:57:36 LOG4 got_cormsg: From DATATAKING: vw% 15.4557883914 2011-Dec-19 01:57:36 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-19 01:57:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-19 01:57:36 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:57:36 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-19 01:57:36 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-19 01:57:36 LOG4 got_cormsg: From DATATAKING: pnt tr 249.64 15.4557883914 -CF 2011-Dec-19 01:57:36 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 01:57:36 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-19 01:57:36 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 01:57:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-19 01:57:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21457.00 2011-Dec-19 01:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.050 (still bad) 2011-Dec-19 01:57:38 INFO2 got_mock_message: Mock spectrometer start file number is 00200 2011-Dec-19 01:57:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.324473 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-19 01:57:38 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-19 01:57:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.324473 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:57:38 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1199.9 s 2011-Dec-19 01:57:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.324473 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:57:38 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-19 01:57:38 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-19 01:57:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-19 01:57:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-19 01:57:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-19 01:57:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-19 01:57:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-19 01:57:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-19 01:57:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.324473 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:57:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-19 01:57:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.324473 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 01:57:38 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-19 01:57:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 01:57:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 01:57:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 01:57:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 01:57:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 01:57:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 01:57:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 01:57:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.324473 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 01:57:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.324473 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 01:57:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.324473 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-19 01:57:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.324473 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-19 01:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.050 (still bad) 2011-Dec-19 01:57:39 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2011-Dec-19 01:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.050 (still bad) 2011-Dec-19 01:57:41 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 01:57:41.01 2011-Dec-19 01:57:41 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324274261.01 Mon Dec 19 01:57:41 2011 2011-Dec-19 01:57:41 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-19 01:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.050 (still bad) 2011-Dec-19 01:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.052 (still bad) 2011-Dec-19 01:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.052 (still bad) 2011-Dec-19 01:57:47 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2011-Dec-19 01:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.052 (still bad) 2011-Dec-19 01:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.053 (still bad) 2011-Dec-19 01:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.052 (still bad) 2011-Dec-19 01:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.051 (still bad) 2011-Dec-19 01:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.053 (still bad) 2011-Dec-19 01:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.053 (still bad) 2011-Dec-19 01:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.052 (still bad) 2011-Dec-19 01:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 01:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 01:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.053 (still bad) 2011-Dec-19 01:58:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 01:58:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 0.895 0.957 0.967 2011-Dec-19 01:58:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.989 1.040 0.912 0.957 2011-Dec-19 01:58:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.873 0.936 1.019 0.906 2011-Dec-19 01:58:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.968 0.014 1.054 0.014 2011-Dec-19 01:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 01:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 01:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 01:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 01:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 01:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 01:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 01:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 01:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 01:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 01:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 01:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 01:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 01:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 01:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 01:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.053 (still bad) 2011-Dec-19 01:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 01:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 01:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 01:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.052 (still bad) 2011-Dec-19 01:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.053 (still bad) 2011-Dec-19 01:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 01:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 01:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 01:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 01:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 01:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 01:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.062 (still bad) 2011-Dec-19 01:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 01:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 01:59:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 01:59:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 0.896 0.958 0.968 2011-Dec-19 01:59:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.987 1.039 0.913 0.958 2011-Dec-19 01:59:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.876 0.937 1.021 0.904 2011-Dec-19 01:59:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.973 0.014 1.058 0.014 2011-Dec-19 01:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 01:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 01:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 01:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 01:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 01:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 01:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 01:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 01:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 01:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 01:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 01:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 01:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 01:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 01:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 01:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 01:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 01:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 01:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 01:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 01:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 01:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 01:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.053 (still bad) 2011-Dec-19 02:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.053 (still bad) 2011-Dec-19 02:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:00:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:00:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 0.901 0.959 0.967 2011-Dec-19 02:00:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.985 1.039 0.917 0.961 2011-Dec-19 02:00:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.877 0.938 1.018 0.905 2011-Dec-19 02:00:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.970 0.014 1.056 0.014 2011-Dec-19 02:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.053 (still bad) 2011-Dec-19 02:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:01:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:01:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 0.899 0.957 0.969 2011-Dec-19 02:01:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.985 1.042 0.911 0.958 2011-Dec-19 02:01:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.877 0.940 1.025 0.909 2011-Dec-19 02:01:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.970 0.014 1.056 0.014 2011-Dec-19 02:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.053 (still bad) 2011-Dec-19 02:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.053 (still bad) 2011-Dec-19 02:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.053 (still bad) 2011-Dec-19 02:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:02:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:02:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 0.895 0.960 0.969 2011-Dec-19 02:02:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 1.041 0.919 0.966 2011-Dec-19 02:02:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.875 0.939 1.015 0.907 2011-Dec-19 02:02:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.968 0.014 1.055 0.014 2011-Dec-19 02:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.053 (still bad) 2011-Dec-19 02:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.052 (still bad) 2011-Dec-19 02:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.053 (still bad) 2011-Dec-19 02:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.053 (still bad) 2011-Dec-19 02:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.053 (still bad) 2011-Dec-19 02:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.053 (still bad) 2011-Dec-19 02:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:03:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:03:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 0.897 0.960 0.970 2011-Dec-19 02:03:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.985 1.042 0.912 0.960 2011-Dec-19 02:03:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.876 0.940 1.021 0.910 2011-Dec-19 02:03:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.966 0.014 1.054 0.014 2011-Dec-19 02:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.053 (still bad) 2011-Dec-19 02:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.053 (still bad) 2011-Dec-19 02:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:04:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:04:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 0.901 0.958 0.970 2011-Dec-19 02:04:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.982 1.041 0.914 0.960 2011-Dec-19 02:04:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.876 0.938 1.018 0.909 2011-Dec-19 02:04:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.968 0.014 1.056 0.014 2011-Dec-19 02:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:05:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:05:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 0.899 0.961 0.968 2011-Dec-19 02:05:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 1.043 0.913 0.962 2011-Dec-19 02:05:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.882 0.953 1.018 0.908 2011-Dec-19 02:05:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.968 0.014 1.054 0.014 2011-Dec-19 02:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.054 (still bad) 2011-Dec-19 02:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:06:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:06:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 0.899 0.958 0.968 2011-Dec-19 02:06:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.982 1.042 0.912 0.959 2011-Dec-19 02:06:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.875 0.938 1.015 0.906 2011-Dec-19 02:06:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.970 0.014 1.056 0.014 2011-Dec-19 02:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:06:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:06:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:07:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:07:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 0.901 0.961 0.967 2011-Dec-19 02:07:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 1.041 0.915 0.962 2011-Dec-19 02:07:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.876 0.939 1.015 0.907 2011-Dec-19 02:07:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.971 0.014 1.058 0.014 2011-Dec-19 02:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.055 (still bad) 2011-Dec-19 02:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.056 (still bad) 2011-Dec-19 02:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:08:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:08:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:08:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:08:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 0.899 0.962 0.970 2011-Dec-19 02:08:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 1.043 0.914 0.959 2011-Dec-19 02:08:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.876 0.938 1.019 0.906 2011-Dec-19 02:08:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.971 0.014 1.057 0.014 2011-Dec-19 02:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.063 (still bad) 2011-Dec-19 02:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.063 (still bad) 2011-Dec-19 02:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.063 (still bad) 2011-Dec-19 02:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:09:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:09:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.969 0.931 0.962 0.967 2011-Dec-19 02:09:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.987 1.041 0.916 0.960 2011-Dec-19 02:09:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.876 0.941 1.022 0.905 2011-Dec-19 02:09:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.974 0.014 1.059 0.014 2011-Dec-19 02:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:09:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:10:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:10:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 0.899 0.963 0.968 2011-Dec-19 02:10:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 1.040 0.914 0.959 2011-Dec-19 02:10:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.876 0.939 1.024 0.909 2011-Dec-19 02:10:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.973 0.014 1.058 0.014 2011-Dec-19 02:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:10:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:10:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:10:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:10:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:10:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:10:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:11:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:11:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:11:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:11:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 0.894 0.972 0.977 2011-Dec-19 02:11:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 1.039 0.916 0.959 2011-Dec-19 02:11:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.883 0.947 1.018 0.907 2011-Dec-19 02:11:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.972 0.014 1.059 0.014 2011-Dec-19 02:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.062 (still bad) 2011-Dec-19 02:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.062 (still bad) 2011-Dec-19 02:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.063 (still bad) 2011-Dec-19 02:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.063 (still bad) 2011-Dec-19 02:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.064 (still bad) 2011-Dec-19 02:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.065 (still bad) 2011-Dec-19 02:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.064 (still bad) 2011-Dec-19 02:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.064 (still bad) 2011-Dec-19 02:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.065 (still bad) 2011-Dec-19 02:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.063 (still bad) 2011-Dec-19 02:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.063 (still bad) 2011-Dec-19 02:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.063 (still bad) 2011-Dec-19 02:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:12:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.062 (still bad) 2011-Dec-19 02:12:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.062 (still bad) 2011-Dec-19 02:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.063 (still bad) 2011-Dec-19 02:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.064 (still bad) 2011-Dec-19 02:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.063 (still bad) 2011-Dec-19 02:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.063 (still bad) 2011-Dec-19 02:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.062 (still bad) 2011-Dec-19 02:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:12:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:12:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 0.894 0.964 0.966 2011-Dec-19 02:12:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.985 1.041 0.915 0.957 2011-Dec-19 02:12:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.874 0.938 1.016 0.906 2011-Dec-19 02:12:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.973 0.014 1.059 0.014 2011-Dec-19 02:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:12:41 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 02:12:41.310 (seconds: 7961.310)!} 2011-Dec-19 02:12:41 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 02:12:41.310 (seconds: 7961.310)! 2011-Dec-19 02:12:42 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 7960.0 to 7961.0! 2011-Dec-19 02:12:43 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (7960.0 - 7962.0)! 2011-Dec-19 02:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:13:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:13:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 0.897 0.963 0.966 2011-Dec-19 02:13:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 1.042 0.915 0.957 2011-Dec-19 02:13:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.874 0.938 1.023 0.909 2011-Dec-19 02:13:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.972 0.014 1.059 0.014 2011-Dec-19 02:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.057 (still bad) 2011-Dec-19 02:13:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.058 (still bad) 2011-Dec-19 02:13:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:13:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:13:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.062 (still bad) 2011-Dec-19 02:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.062 (still bad) 2011-Dec-19 02:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.062 (still bad) 2011-Dec-19 02:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.062 (still bad) 2011-Dec-19 02:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:14:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:14:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.952 0.917 0.967 0.966 2011-Dec-19 02:14:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 1.041 0.915 0.957 2011-Dec-19 02:14:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.876 0.938 1.021 0.905 2011-Dec-19 02:14:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.973 0.014 1.061 0.014 2011-Dec-19 02:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.062 (still bad) 2011-Dec-19 02:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.064 (still bad) 2011-Dec-19 02:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.062 (still bad) 2011-Dec-19 02:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.064 (still bad) 2011-Dec-19 02:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.064 (still bad) 2011-Dec-19 02:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.064 (still bad) 2011-Dec-19 02:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.065 (still bad) 2011-Dec-19 02:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.063 (still bad) 2011-Dec-19 02:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.065 (still bad) 2011-Dec-19 02:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.065 (still bad) 2011-Dec-19 02:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.064 (still bad) 2011-Dec-19 02:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.065 (still bad) 2011-Dec-19 02:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.064 (still bad) 2011-Dec-19 02:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.064 (still bad) 2011-Dec-19 02:15:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.064 (still bad) 2011-Dec-19 02:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.063 (still bad) 2011-Dec-19 02:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.062 (still bad) 2011-Dec-19 02:15:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.062 (still bad) 2011-Dec-19 02:15:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.062 (still bad) 2011-Dec-19 02:15:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.063 (still bad) 2011-Dec-19 02:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.062 (still bad) 2011-Dec-19 02:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.063 (still bad) 2011-Dec-19 02:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:15:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.063 (still bad) 2011-Dec-19 02:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.063 (still bad) 2011-Dec-19 02:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.062 (still bad) 2011-Dec-19 02:15:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:15:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 0.898 0.965 0.966 2011-Dec-19 02:15:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.982 1.038 0.916 0.960 2011-Dec-19 02:15:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.875 0.940 1.021 0.907 2011-Dec-19 02:15:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.974 0.014 1.061 0.014 2011-Dec-19 02:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.062 (still bad) 2011-Dec-19 02:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.062 (still bad) 2011-Dec-19 02:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.065 (still bad) 2011-Dec-19 02:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.067 (still bad) 2011-Dec-19 02:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-19 02:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.072 (still bad) 2011-Dec-19 02:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2011-Dec-19 02:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2011-Dec-19 02:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2011-Dec-19 02:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.074 (still bad) 2011-Dec-19 02:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-19 02:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.071 (still bad) 2011-Dec-19 02:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.068 (still bad) 2011-Dec-19 02:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.065 (still bad) 2011-Dec-19 02:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.064 (still bad) 2011-Dec-19 02:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.063 (still bad) 2011-Dec-19 02:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.063 (still bad) 2011-Dec-19 02:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.063 (still bad) 2011-Dec-19 02:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.062 (still bad) 2011-Dec-19 02:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:16:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:16:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 0.899 0.962 0.966 2011-Dec-19 02:16:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.982 1.039 0.914 0.959 2011-Dec-19 02:16:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.875 0.939 1.019 0.907 2011-Dec-19 02:16:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.972 0.014 1.058 0.014 2011-Dec-19 02:16:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:16:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:16:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.062 (still bad) 2011-Dec-19 02:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:16:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:16:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:16:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.062 (still bad) 2011-Dec-19 02:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.062 (still bad) 2011-Dec-19 02:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.059 (still bad) 2011-Dec-19 02:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.060 (still bad) 2011-Dec-19 02:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:17:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:17:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 0.896 0.964 0.967 2011-Dec-19 02:17:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.981 1.039 0.912 0.957 2011-Dec-19 02:17:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.874 0.938 1.028 0.915 2011-Dec-19 02:17:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.971 0.014 1.059 0.014 2011-Dec-19 02:17:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-19 02:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:17:42 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-19 02:17:42 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-19 02:17:42 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-19 02:17:42 LOG5 end_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2011-Dec-19 02:17:42 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-19 02:17:42 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2011-Dec-19 02:17:42 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-19 02:17:42 LOG5 finish_task: Level: (2) ID = <10071> Status = 0 0 0 0 ok 2011-Dec-19 02:17:42 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-19 02:17:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-19 02:17:42 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-19 02:17:42 LOG5 end_task: Level: (2) ID = <10071> Status = 0 0 0 0 ok 2011-Dec-19 02:17:42 COMMAND run_command_line: EXECUTING command 13: 'ENDIF' 2011-Dec-19 02:17:42 COMMAND run_command_line: EXECUTING command 16: 'IF LSTSLEW(AGES3193_p3_034) < 091411 THEN' 2011-Dec-19 02:17:42 LOG3 is_if_valid: Current source data: down 255.7 31.4 51 - - 214 1.8 2011-Dec-19 02:17:42 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_034) < 091411 2011-Dec-19 02:17:42 INFO5 is_if_valid: Condition parsed as: 7.7081119999999999 < 9.2363888888888876 2011-Dec-19 02:17:42 COMMAND run_command_line: EXECUTING command 17: 'FIXEDDRIFT az=241.63 alfaangle=-42.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_034 ra=95300.00 dec=230330.00' 2011-Dec-19 02:17:42 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-19 02:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.061 (still bad) 2011-Dec-19 02:17:43 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-19 02:17:43 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 241.63 -42.4 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_034 95300.00 230330.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-19 02:17:43 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-19 02:17:43 LOG5 begin_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2011-Dec-19 02:17:43 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_032' 2011-Dec-19 02:17:43 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-19 02:17:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_034} 2011-Dec-19 02:17:43 INFO3 fixed_driftmap: Sending telescope to Az = 241.63 and ZA = 10.34 2011-Dec-19 02:17:43 LOG3 track_source: Calling 'track_source AGES3193_p3_034 241.63 10.3365649218 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-19 02:17:43 START begin_task: Starting task 'sending tracking commands' 2011-Dec-19 02:17:43 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2011-Dec-19 02:17:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_034} INFO {Slewing to source 'AGES3193_p3_034' ...} 2011-Dec-19 02:17:43 INFO1 track_source: Starting to track AGES3193_p3_034 2011-Dec-19 02:17:43 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_034" 2011-Dec-19 02:17:43 LOG3 vw_send: To DATATAKING: set ra 241.63 2011-Dec-19 02:17:43 LOG3 vw_send: To DATATAKING: set dec 10.3365649218 2011-Dec-19 02:17:43 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-19 02:17:43 LOG3 vw_send: To DATATAKING: pnt tr 241.63 10.3365649218 -CF 2011-Dec-19 02:17:43 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 02:17:43 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-19 02:17:43 LOG5 finish_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2011-Dec-19 02:17:43 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-19 02:17:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 02:17:43 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-19 02:17:43 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2011-Dec-19 02:17:43 START begin_task: Starting task 'rotate ALFA to -42.4 degrees' 2011-Dec-19 02:17:43 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2011-Dec-19 02:17:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -42.4 degrees ...} 2011-Dec-19 02:17:43 INFO2 rotate_alfa: ALFA commanded to -42.4 degrees 2011-Dec-19 02:17:43 LOG3 sock_errsend: To ALFAMOTOR: POSITION -42.4 REPLY 2011-Dec-19 02:17:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-19 02:17:43 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-19 02:17:43 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2011-Dec-19 02:17:43 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_034" 2011-Dec-19 02:17:43 LOG4 got_cormsg: From DATATAKING: set ra 241.63 2011-Dec-19 02:17:43 LOG4 got_cormsg: From DATATAKING: set dec 10.3365649218 2011-Dec-19 02:17:43 LOG4 got_cormsg: From DATATAKING: vw% 241.63 2011-Dec-19 02:17:43 LOG4 got_cormsg: From DATATAKING: vw% 10.3365649218 2011-Dec-19 02:17:43 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 02:17:43 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-19 02:17:43 LOG4 got_cormsg: From DATATAKING: pnt tr 241.63 10.3365649218 -CF 2011-Dec-19 02:17:43 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 02:17:43 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-19 02:17:43 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 02:17:50 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-19 02:17:50 INFO3 alfa_motor: ALFA rotator in-position -42.40 degrees 2011-Dec-19 02:17:50 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-19 02:17:50 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2011-Dec-19 02:17:50 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-19 02:17:50 STOP finish_task: Finishing task 'rotate ALFA to -42.4 degrees' 2011-Dec-19 02:17:50 LOG5 finish_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2011-Dec-19 02:17:50 INFO2 finish_task: DONE finished configuration: rotating ALFA to -42.4 degrees 2011-Dec-19 02:17:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 02:17:50 STOP end_task: Finishing task 'rotate ALFA to -42.4 degrees' with status 'OK' 2011-Dec-19 02:17:50 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2011-Dec-19 02:17:50 START begin_task: Starting task 'waiting on telescope' 2011-Dec-19 02:17:50 LOG5 begin_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2011-Dec-19 02:17:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-19 02:17:50 LOG3 waittrk: Start waittrk 5 2011-Dec-19 02:17:50 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-19 02:17:50 LOG5 begin_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2011-Dec-19 02:17:55 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-19 02:17:55 LOG5 end_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2011-Dec-19 02:17:56 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-19 02:17:56 LOG5 begin_task: Level: (4) ID = <10118> Status = 0 0 0 0 ok 2011-Dec-19 02:19:57 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-19 02:19:57 LOG5 end_task: Level: (4) ID = <10118> Status = 0 0 0 0 ok 2011-Dec-19 02:19:57 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-19 02:19:57 INFO2 waittrk: Now tracking AGES3193_p3_034 2011-Dec-19 02:19:57 LOG4 waittrk: Current telescope position: Az = 241.16 ZA = 10.34 2011-Dec-19 02:19:57 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-19 02:19:57 LOG5 finish_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2011-Dec-19 02:19:57 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-19 02:19:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 02:19:57 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-19 02:19:57 LOG5 end_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2011-Dec-19 02:19:57 START begin_task: Starting task 'selecting calibration type' 2011-Dec-19 02:19:57 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2011-Dec-19 02:19:57 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-19 02:19:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-19 02:19:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 02:19:57 START begin_task: Starting task 'waiting on setcal' 2011-Dec-19 02:19:57 LOG5 begin_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2011-Dec-19 02:19:57 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-19 02:19:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 02:19:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 02:19:58 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-19 02:19:58 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-19 02:19:58 LOG5 end_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2011-Dec-19 02:19:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-19 02:19:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-19 02:19:58 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-19 02:19:58 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-19 02:19:58 LOG5 begin_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2011-Dec-19 02:19:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 02:19:59 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-19 02:19:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-19 02:19:59 LOG5 end_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2011-Dec-19 02:19:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-19 02:19:59 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-19 02:19:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-19 02:19:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-19 02:19:59 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-19 02:19:59 LOG5 begin_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2011-Dec-19 02:19:59 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-19 02:19:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-19 02:19:59 LOG5 end_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2011-Dec-19 02:19:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-19 02:19:59 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-19 02:19:59 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-19 02:19:59 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2011-Dec-19 02:19:59 LOG5 dopset_later: Calling 'dopset_later 0' 2011-Dec-19 02:19:59 INFO3 dopset_later: Setting Doppler correction now 2011-Dec-19 02:19:59 LOG5 antvel: Calling 'antvel 241.630000 10.336565 F Heliocentric 0' 2011-Dec-19 02:19:59 LOG2 antvel: Transforming current Az = 241.63 ZA = 10.34 to apparent RA = 08:22:28.8 Dec = +22:59:51.9 2011-Dec-19 02:19:59 LOG2 antvel: Parameters to Doppler: Heliocentric 22798 2011 353 0.0 2011-Dec-19 02:19:59 INFO5 antvel: Computed antenna velocity: -17.51258 km/s 2011-Dec-19 02:19:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-17.5125763341 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-19 02:19:59 INFO4 dopset_gen: New sky frequencies: 1381.324120 1381.324120 1381.324120 1381.324120 1381.324120 1381.324120 1381.324120 1381.324120 1381.324120 2011-Dec-19 02:19:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.324120 sky0=1381.324120 sky1=1381.324120 sky2=1381.324120 sky3=1381.324120 sky4=1381.324120 sky5=1381.324120 sky6=1381.324120 sky7=1381.324120 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-19 02:19:59 LOG2 dopset_gen: Result from 'sky2syn': 1631.324120 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-19 02:19:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631324120.0} 2011-Dec-19 02:19:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 02:19:59 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-19 02:19:59 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-19 02:19:59 INFO5 fixed_driftmap: Tracking J2000 position: RA = 08:21:49.4 Dec = +23:02:11.4 2011-Dec-19 02:19:59 LOG3 track_source: Calling 'track_source AGES3193_p3_034 082149.4 230211.4 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-19 02:19:59 START begin_task: Starting task 'sending tracking commands' 2011-Dec-19 02:19:59 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2011-Dec-19 02:19:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_034} INFO {Slewing to source 'AGES3193_p3_034' ...} 2011-Dec-19 02:19:59 INFO1 track_source: Starting to track AGES3193_p3_034 2011-Dec-19 02:19:59 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_034" 2011-Dec-19 02:19:59 LOG3 vw_send: To DATATAKING: set ra 082149.4 2011-Dec-19 02:19:59 LOG3 vw_send: To DATATAKING: set dec 230211.4 2011-Dec-19 02:19:59 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-19 02:19:59 LOG3 vw_send: To DATATAKING: pnt tr 082149.4 230211.4 -CJ 2011-Dec-19 02:19:59 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 02:19:59 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-19 02:19:59 LOG5 finish_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2011-Dec-19 02:19:59 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-19 02:19:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 02:19:59 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-19 02:19:59 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2011-Dec-19 02:19:59 START begin_task: Starting task 'waiting on telescope' 2011-Dec-19 02:19:59 LOG5 begin_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2011-Dec-19 02:19:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-19 02:19:59 LOG3 waittrk: Start waittrk 5 2011-Dec-19 02:19:59 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-19 02:19:59 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2011-Dec-19 02:19:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631324120.0} 2011-Dec-19 02:19:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 02:19:59 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_034" 2011-Dec-19 02:19:59 LOG4 got_cormsg: From DATATAKING: set ra 082149.4 2011-Dec-19 02:19:59 LOG4 got_cormsg: From DATATAKING: set dec 230211.4 2011-Dec-19 02:19:59 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-19 02:19:59 LOG4 got_cormsg: From DATATAKING: vw% 082149.4 2011-Dec-19 02:19:59 LOG4 got_cormsg: From DATATAKING: vw% 230211.4 2011-Dec-19 02:19:59 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 02:19:59 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-19 02:19:59 LOG4 got_cormsg: From DATATAKING: pnt tr 082149.4 230211.4 -CJ 2011-Dec-19 02:19:59 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 02:19:59 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-19 02:19:59 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 02:20:04 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-19 02:20:04 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2011-Dec-19 02:20:04 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-19 02:20:04 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2011-Dec-19 02:20:06 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-19 02:20:06 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2011-Dec-19 02:20:06 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-19 02:20:06 INFO2 waittrk: Now tracking AGES3193_p3_034 2011-Dec-19 02:20:07 LOG4 waittrk: Current telescope position: Az = 241.15 ZA = 10.33 2011-Dec-19 02:20:07 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-19 02:20:07 LOG5 finish_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2011-Dec-19 02:20:07 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-19 02:20:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 02:20:07 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-19 02:20:07 LOG5 end_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2011-Dec-19 02:20:07 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-19 02:20:07 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2011-Dec-19 02:20:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-19 02:20:07 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-19 02:20:07 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-19 02:20:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-19 02:20:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 02:20:07 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-19 02:20:07 LOG5 begin_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2011-Dec-19 02:20:07 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-19 02:20:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 02:20:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 02:20:10 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-19 02:20:10 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-19 02:20:10 LOG5 end_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2011-Dec-19 02:20:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-19 02:20:10 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-19 02:20:10 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2011-Dec-19 02:20:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-19 02:20:10 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 02:20:10 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 02:20:10 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 02:20:10 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 02:20:10 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-19 02:20:10 LOG5 begin_task: Level: (5) ID = <10130> Status = 0 0 0 0 ok 2011-Dec-19 02:20:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-19 02:20:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 02:20:10 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 8 6 dB 2011-Dec-19 02:20:10 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 3 3 dB 2011-Dec-19 02:20:10 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 3 dB 2011-Dec-19 02:20:10 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2011-Dec-19 02:20:10 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-19 02:20:10 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-19 02:20:10 LOG5 end_task: Level: (5) ID = <10130> Status = 0 0 0 0 ok 2011-Dec-19 02:20:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.896 1.091 ALFA beam 1: 0.930 0.938 2011-Dec-19 02:20:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.925 0.992 ALFA beam 3: 1.085 0.903 2011-Dec-19 02:20:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.856 0.891 ALFA beam 5: 0.985 1.109 2011-Dec-19 02:20:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.940 0.014 ALFA beam 7: 1.026 0.014 2011-Dec-19 02:20:10 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-19 02:20:10 LOG5 finish_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2011-Dec-19 02:20:10 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-19 02:20:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 02:20:10 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-19 02:20:10 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2011-Dec-19 02:20:10 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-19 02:20:10 LOG5 begin_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2011-Dec-19 02:20:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-19 02:20:10 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-19 02:20:10 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-19 02:20:10 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-19 02:20:10 LOG5 begin_task: Level: (5) ID = <10132> Status = 0 0 0 0 ok 2011-Dec-19 02:20:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:20:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.896 1.091 0.930 0.938 2011-Dec-19 02:20:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 0.992 1.085 0.903 2011-Dec-19 02:20:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.856 0.891 0.985 1.109 2011-Dec-19 02:20:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.014 1.026 0.014 2011-Dec-19 02:20:16 INFO3 from_mock: From MOCK: b0s0g0 rms:A 32.0 28.1 B 30.6 30.7 mn:A -0.0 -0.1 B -0.5 -0.4 gn: 11 11 2011-Dec-19 02:20:16 INFO3 from_mock: From MOCK: b0s1g0 rms:A 32.1 30.8 B 28.4 30.1 mn:A -0.1 -0.4 B -0.8 0.1 gn: 12 11 2011-Dec-19 02:20:16 INFO3 from_mock: From MOCK: b1s0g0 rms:A 31.1 29.1 B 33.3 29.2 mn:A 0.3 0.7 B 0.1 -0.1 gn: 7 11 2011-Dec-19 02:20:16 INFO3 from_mock: From MOCK: b1s1g0 rms:A 30.4 28.1 B 31.5 31.5 mn:A -0.3 -0.3 B 0.5 0.2 gn: 8 10 2011-Dec-19 02:20:16 INFO3 from_mock: From MOCK: b2s0g0 rms:A 28.9 28.0 B 28.2 29.5 mn:A 0.1 -0.2 B 0.4 -0.0 gn: 10 11 2011-Dec-19 02:20:16 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.6 29.9 B 32.7 30.4 mn:A 0.2 -0.3 B -0.1 0.1 gn: 11 12 2011-Dec-19 02:20:16 INFO3 from_mock: From MOCK: b3s0g0 rms:A 29.4 29.2 B 31.4 28.0 mn:A 0.3 -0.3 B 0.1 -0.2 gn: 12 12 2011-Dec-19 02:20:16 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.7 30.0 B 29.7 30.9 mn:A -0.3 0.4 B 0.2 0.1 gn: 12 12 2011-Dec-19 02:20:16 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.9 29.9 B 31.7 31.9 mn:A -0.2 -0.3 B -0.4 -0.0 gn: 13 12 2011-Dec-19 02:20:16 INFO3 from_mock: From MOCK: b4s1g0 rms:A 29.7 26.9 B 30.6 29.5 mn:A -0.0 -0.1 B -0.5 0.1 gn: 15 13 2011-Dec-19 02:20:16 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.9 28.8 B 31.0 31.0 mn:A 0.7 0.4 B 0.0 0.4 gn: 12 11 2011-Dec-19 02:20:16 INFO3 from_mock: From MOCK: b5s1g0 rms:A 30.0 29.8 B 31.3 31.0 mn:A -0.3 0.2 B -0.1 0.1 gn: 12 11 2011-Dec-19 02:20:16 INFO3 from_mock: From MOCK: b6s0g0 rms:A 30.3 27.8 B 14.1 14.5 mn:A -0.5 0.3 B 0.4 -0.4 gn: 12 31 2011-Dec-19 02:20:16 INFO3 from_mock: From MOCK: b6s1g0 rms:A 30.6 27.8 B 11.1 10.8 mn:A 0.6 0.6 B 0.1 0.1 gn: 13 31 2011-Dec-19 02:20:16 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-19 02:20:16 LOG5 end_task: Level: (5) ID = <10132> Status = 0 0 0 0 ok 2011-Dec-19 02:20:16 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-19 02:20:16 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-19 02:20:16 LOG5 finish_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2011-Dec-19 02:20:16 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-19 02:20:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 02:20:16 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-19 02:20:16 LOG5 end_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2011-Dec-19 02:20:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-19 02:20:16 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-19 02:20:16 LOG5 finish_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2011-Dec-19 02:20:16 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-19 02:20:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 02:20:16 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-19 02:20:16 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2011-Dec-19 02:20:16 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Edwin 2011-Dec-19 02:20:16 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Edwin 2011-Dec-19 02:20:16 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Edwin 2011-Dec-19 02:20:16 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Edwin 2011-Dec-19 02:20:16 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-19 02:20:16 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-19 02:20:16 LOG5 begin_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2011-Dec-19 02:20:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-19 02:20:16 START begin_task: Starting task 'selecting calibration type' 2011-Dec-19 02:20:16 LOG5 begin_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2011-Dec-19 02:20:16 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-19 02:20:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-19 02:20:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 02:20:16 START begin_task: Starting task 'waiting on setcal' 2011-Dec-19 02:20:16 LOG5 begin_task: Level: (5) ID = <10135> Status = 0 0 0 0 ok 2011-Dec-19 02:20:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Edwin' 2011-Dec-19 02:20:16 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-19 02:20:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 02:20:17 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 02:20:17 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-19 02:20:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-19 02:20:17 LOG5 end_task: Level: (5) ID = <10135> Status = 0 0 0 0 ok 2011-Dec-19 02:20:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-19 02:20:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-19 02:20:17 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-19 02:20:17 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-19 02:20:17 LOG5 begin_task: Level: (5) ID = <10136> Status = 0 0 0 0 ok 2011-Dec-19 02:20:17 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 02:20:17 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-19 02:20:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-19 02:20:17 LOG5 end_task: Level: (5) ID = <10136> Status = 0 0 0 0 ok 2011-Dec-19 02:20:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-19 02:20:17 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-19 02:20:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-19 02:20:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-19 02:20:17 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-19 02:20:17 LOG5 begin_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2011-Dec-19 02:20:17 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-19 02:20:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-19 02:20:17 LOG5 end_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2011-Dec-19 02:20:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-19 02:20:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-19 02:20:17 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-19 02:20:17 LOG5 end_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2011-Dec-19 02:20:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-19 02:20:17 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-19 02:20:17 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-19 02:20:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-19 02:20:17 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2011-Dec-19 02:20:17 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-19 02:20:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-19 02:20:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-19 02:20:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-19 02:20:17 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2011-Dec-19 02:20:17 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-19 02:20:17 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-19 02:20:17 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2011-Dec-19 02:20:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-19 02:20:17 LOG5 log_alfabeam: Parameters: 8.3637222222222203 23.0365 7.721564 2011.9667280464928 -42.400097 2011-Dec-19 02:20:17 LOG4 log_alfabeam: ALFABEAM 0 8.363722222222220 23.036499999999997 2011-Dec-19 02:20:17 LOG4 log_alfabeam: ALFABEAM 1 8.364251304495157 22.944010069883738 2011-Dec-19 02:20:17 LOG4 log_alfabeam: ALFABEAM 2 8.370513405593574 23.005338995118343 2011-Dec-19 02:20:17 LOG4 log_alfabeam: ALFABEAM 3 8.369949039845634 23.098611659812288 2011-Dec-19 02:20:17 LOG4 log_alfabeam: ALFABEAM 4 8.363127829880142 23.129169341788078 2011-Dec-19 02:20:17 LOG4 log_alfabeam: ALFABEAM 5 8.356927905264797 23.066563691340512 2011-Dec-19 02:20:17 LOG4 log_alfabeam: ALFABEAM 6 8.357486610499572 22.974674069034016 2011-Dec-19 02:20:17 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-19 02:20:17 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-19 02:20:17 LOG3 take_mock_data: PSET configuration: obsnm=Edwin 2011-Dec-19 02:20:17 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_034 2011-Dec-19 02:20:17 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-19 02:20:17 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-19 02:20:17 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-19 02:20:17 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-19 02:20:17 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-19 02:20:17 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-19 02:20:17 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-19 02:20:17 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-19 02:20:17 LOG3 take_mock_data: PSET configuration: patternid=135300012 2011-Dec-19 02:20:17 LOG3 take_mock_data: PSET configuration: scanid=135300013 2011-Dec-19 02:20:17 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-19 02:20:17 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-19 02:20:17 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-19 02:20:17 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456324120.0 2011-Dec-19 02:20:17 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306324120.0 2011-Dec-19 02:20:17 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-19 02:20:17 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-19 02:20:17 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Edwin:object=AGES3193_p3_034:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=135300012:scanid=135300013:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456324120.0:topobfreqhz=1306324120.0:filetype=1 2011-Dec-19 02:20:17 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-19 02:20:17 LOG5 begin_task: Level: (5) ID = <10140> Status = 0 0 0 0 ok 2011-Dec-19 02:20:17 LOG4 from_mock: From MOCK: psetok 2011-Dec-19 02:20:17 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-19 02:20:17 LOG5 end_task: Level: (5) ID = <10140> Status = 0 0 0 0 ok 2011-Dec-19 02:20:17 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-19 02:20:17 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-19 02:20:17 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-19 02:20:17 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-19 02:20:17 LOG5 begin_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2011-Dec-19 02:20:17 NOTE WAPPDATA-new_file: New FITS file: wapp.20111219.a2048.0002.fits 2011-Dec-19 02:20:17 LOG4 from_mock: From MOCK: starok 2011-Dec-19 02:20:17 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-19 02:20:17 LOG5 end_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2011-Dec-19 02:20:17 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-19 02:20:17 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135300013 2011-Dec-19 02:20:18 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-19 02:20:18 LOG5 begin_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2011-Dec-19 02:20:18 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111219.a2048.0002.fits} 2011-Dec-19 02:20:18 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-19 02:20:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-19 02:20:18 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-19 02:20:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-19 02:20:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22819.00 2011-Dec-19 02:20:19 INFO2 got_mock_message: Mock spectrometer start file number is 00300 2011-Dec-19 02:20:19 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-19 02:20:19 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-19 02:20:19 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-19 02:20:19 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-19 02:20:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-19 02:20:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-19 02:20:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-19 02:20:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-19 02:20:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-19 02:20:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-19 02:20:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-19 02:20:20 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-19 02:20:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 02:20:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 02:20:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 02:20:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 02:20:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 02:20:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 02:20:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 02:20:22 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:20:23.00 2011-Dec-19 02:20:23 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324275623.00 Mon Dec 19 02:20:23 2011 2011-Dec-19 02:20:23 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-19 02:20:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.324120 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-19 02:20:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.324120 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 02:20:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.324120 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 02:20:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.324120 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 02:20:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.324120 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 02:20:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.324120 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 02:20:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.324120 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 02:20:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.324120 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-19 02:20:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.324120 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-19 02:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.432 (still bad) 2011-Dec-19 02:20:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-19 02:20:28 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-19 02:20:29 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-19 02:20:29 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-19 02:20:29 LOG5 end_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2011-Dec-19 02:20:29 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-19 02:20:29 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2011-Dec-19 02:20:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-19 02:20:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-19 02:20:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-19 02:20:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-19 02:20:29 LOG5 begin_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2011-Dec-19 02:20:29 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-19 02:20:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-19 02:20:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-19 02:20:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-19 02:20:29 LOG5 end_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2011-Dec-19 02:20:29 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-19 02:20:29 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-19 02:20:29 LOG5 begin_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2011-Dec-19 02:20:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-19 02:20:29 LOG5 log_alfabeam: Parameters: 8.3637222222222203 23.0365 7.724628 2011.9667283950616 -42.400097 2011-Dec-19 02:20:29 LOG4 log_alfabeam: ALFABEAM 0 8.363722222222219 23.036499999999993 2011-Dec-19 02:20:29 LOG4 log_alfabeam: ALFABEAM 1 8.364264863949311 22.944025539254476 2011-Dec-19 02:20:29 LOG4 log_alfabeam: ALFABEAM 2 8.370518007703765 23.005528664092125 2011-Dec-19 02:20:29 LOG4 log_alfabeam: ALFABEAM 3 8.369939803268551 23.098787836904993 2011-Dec-19 02:20:29 LOG4 log_alfabeam: ALFABEAM 4 8.363113978481293 23.129152709796745 2011-Dec-19 02:20:29 LOG4 log_alfabeam: ALFABEAM 5 8.356923473638327 23.066369992010408 2011-Dec-19 02:20:29 LOG4 log_alfabeam: ALFABEAM 6 8.357495748739813 22.974498943571877 2011-Dec-19 02:20:29 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-19 02:20:29 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-19 02:20:29 LOG3 take_mock_data: PSET configuration: obsnm=Edwin 2011-Dec-19 02:20:29 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_034 2011-Dec-19 02:20:29 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-19 02:20:29 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-19 02:20:29 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-19 02:20:29 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-19 02:20:29 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-19 02:20:29 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-19 02:20:29 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-19 02:20:29 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-19 02:20:29 LOG3 take_mock_data: PSET configuration: patternid=135300012 2011-Dec-19 02:20:29 LOG3 take_mock_data: PSET configuration: scanid=135300014 2011-Dec-19 02:20:29 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-19 02:20:29 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-19 02:20:29 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-19 02:20:29 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456324120.0 2011-Dec-19 02:20:29 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306324120.0 2011-Dec-19 02:20:29 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-19 02:20:29 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-19 02:20:29 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Edwin:object=AGES3193_p3_034:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=135300012:scanid=135300014:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456324120.0:topobfreqhz=1306324120.0:filetype=1 2011-Dec-19 02:20:29 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-19 02:20:29 LOG5 begin_task: Level: (5) ID = <10145> Status = 0 0 0 0 ok 2011-Dec-19 02:20:29 LOG4 from_mock: From MOCK: psetok 2011-Dec-19 02:20:29 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-19 02:20:29 LOG5 end_task: Level: (5) ID = <10145> Status = 0 0 0 0 ok 2011-Dec-19 02:20:29 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-19 02:20:29 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-19 02:20:29 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-19 02:20:29 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-19 02:20:29 LOG5 begin_task: Level: (5) ID = <10146> Status = 0 0 0 0 ok 2011-Dec-19 02:20:29 LOG4 from_mock: From MOCK: starok 2011-Dec-19 02:20:29 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-19 02:20:29 LOG5 end_task: Level: (5) ID = <10146> Status = 0 0 0 0 ok 2011-Dec-19 02:20:29 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-19 02:20:29 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135300014 2011-Dec-19 02:20:29 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-19 02:20:29 LOG5 begin_task: Level: (5) ID = <10147> Status = 0 0 0 0 ok 2011-Dec-19 02:20:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-19 02:20:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-19 02:20:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22830.00 2011-Dec-19 02:20:30 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-19 02:20:30 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-19 02:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.517 (still bad) 2011-Dec-19 02:20:32 INFO2 got_mock_message: Mock spectrometer start file number is 00400 2011-Dec-19 02:20:32 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-19 02:20:32 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-19 02:20:32 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-19 02:20:32 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-19 02:20:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-19 02:20:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-19 02:20:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-19 02:20:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-19 02:20:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-19 02:20:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-19 02:20:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-19 02:20:32 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-19 02:20:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 02:20:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 02:20:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 02:20:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 02:20:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 02:20:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 02:20:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 02:20:35 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:20:35.01 2011-Dec-19 02:20:35 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324275635.01 Mon Dec 19 02:20:35 2011 2011-Dec-19 02:20:35 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-19 02:20:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.324120 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-19 02:20:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.324120 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 02:20:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.324120 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 02:20:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.324120 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 02:20:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.324120 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 02:20:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.324120 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 02:20:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.324120 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 02:20:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.324120 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-19 02:20:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.324120 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-19 02:20:35 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-19 02:20:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-19 02:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:20:40 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-19 02:20:41 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-19 02:20:41 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-19 02:20:41 LOG5 end_task: Level: (5) ID = <10147> Status = 0 0 0 0 ok 2011-Dec-19 02:20:41 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-19 02:20:41 LOG5 end_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2011-Dec-19 02:20:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-19 02:20:41 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-19 02:20:41 LOG5 finish_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2011-Dec-19 02:20:41 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-19 02:20:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 02:20:41 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-19 02:20:41 LOG5 end_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2011-Dec-19 02:20:41 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-19 02:20:41 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 241.63 and ZA = 10.34 2011-Dec-19 02:20:41 LOG3 track_source: Calling 'track_source AGES3193_p3_034 241.63 10.3365649218 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-19 02:20:41 START begin_task: Starting task 'sending tracking commands' 2011-Dec-19 02:20:41 LOG5 begin_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2011-Dec-19 02:20:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_034} INFO {Slewing to source 'AGES3193_p3_034' ...} 2011-Dec-19 02:20:41 INFO1 track_source: Starting to track AGES3193_p3_034 2011-Dec-19 02:20:41 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_034" 2011-Dec-19 02:20:41 LOG3 vw_send: To DATATAKING: set ra 241.63 2011-Dec-19 02:20:41 LOG3 vw_send: To DATATAKING: set dec 10.3365649218 2011-Dec-19 02:20:41 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-19 02:20:41 LOG3 vw_send: To DATATAKING: pnt tr 241.63 10.3365649218 -CF 2011-Dec-19 02:20:41 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 02:20:41 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-19 02:20:41 LOG5 finish_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2011-Dec-19 02:20:41 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-19 02:20:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 02:20:41 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-19 02:20:41 LOG5 end_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2011-Dec-19 02:20:41 LOG1 fixed_driftmap: Parameters: HA = -00:39:30.2 Start = 09:14:12.0 LST = 07:43:40.7 diff = 5431.3 secs 2011-Dec-19 02:20:41 WARNING fixed_driftmap: WARNING RA is more than 1 hour away --- starting anyway! 2011-Dec-19 02:20:41 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-19 02:20:41 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-19 02:20:41 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-19 02:20:41 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-19 02:20:41 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-19 02:20:41 LOG5 begin_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2011-Dec-19 02:20:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-19 02:20:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-19 02:20:41 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-19 02:20:41 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-19 02:20:41 LOG3 take_mock_data: PSET configuration: obsnm=Edwin 2011-Dec-19 02:20:41 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_034 2011-Dec-19 02:20:41 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-19 02:20:41 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-19 02:20:41 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-19 02:20:41 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-19 02:20:41 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-19 02:20:41 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-19 02:20:41 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-19 02:20:41 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-19 02:20:41 LOG3 take_mock_data: PSET configuration: patternid=135300015 2011-Dec-19 02:20:41 LOG3 take_mock_data: PSET configuration: scanid=135300015 2011-Dec-19 02:20:41 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-19 02:20:41 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-19 02:20:41 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-19 02:20:41 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456324120.0 2011-Dec-19 02:20:41 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306324120.0 2011-Dec-19 02:20:41 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-19 02:20:41 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-19 02:20:41 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Edwin:object=AGES3193_p3_034:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=135300015:scanid=135300015:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456324120.0:topobfreqhz=1306324120.0:filetype=1 2011-Dec-19 02:20:41 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-19 02:20:41 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2011-Dec-19 02:20:41 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_034" 2011-Dec-19 02:20:41 LOG4 got_cormsg: From DATATAKING: set ra 241.63 2011-Dec-19 02:20:41 LOG4 from_mock: From MOCK: psetok 2011-Dec-19 02:20:41 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-19 02:20:41 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2011-Dec-19 02:20:41 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-19 02:20:41 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-19 02:20:41 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-19 02:20:41 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-19 02:20:41 LOG5 begin_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2011-Dec-19 02:20:41 LOG4 got_cormsg: From DATATAKING: set dec 10.3365649218 2011-Dec-19 02:20:41 LOG4 got_cormsg: From DATATAKING: vw% 241.63 2011-Dec-19 02:20:41 LOG4 from_mock: From MOCK: starok 2011-Dec-19 02:20:41 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-19 02:20:41 LOG5 end_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2011-Dec-19 02:20:41 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-19 02:20:41 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 135300015 2011-Dec-19 02:20:42 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-19 02:20:42 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2011-Dec-19 02:20:42 LOG4 got_cormsg: From DATATAKING: vw% 10.3365649218 2011-Dec-19 02:20:42 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-19 02:20:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-19 02:20:42 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 02:20:42 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-19 02:20:42 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-19 02:20:42 LOG4 got_cormsg: From DATATAKING: pnt tr 241.63 10.3365649218 -CF 2011-Dec-19 02:20:42 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 02:20:42 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-19 02:20:42 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 02:20:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-19 02:20:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22843.00 2011-Dec-19 02:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:20:43 INFO2 got_mock_message: Mock spectrometer start file number is 00500 2011-Dec-19 02:20:43 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-19 02:20:43 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1199.9 s 2011-Dec-19 02:20:43 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-19 02:20:43 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-19 02:20:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-19 02:20:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-19 02:20:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-19 02:20:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-19 02:20:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-19 02:20:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-19 02:20:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-19 02:20:43 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-19 02:20:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 02:20:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 02:20:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 02:20:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 02:20:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 02:20:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 02:20:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 02:20:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.324120 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-19 02:20:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.324120 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 02:20:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.324120 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 02:20:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.324120 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 02:20:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.324120 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 02:20:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.324120 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 02:20:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.324120 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 02:20:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.324120 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-19 02:20:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.324120 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-19 02:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:20:45 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2011-Dec-19 02:20:46 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:20:46.01 2011-Dec-19 02:20:46 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324275646.01 Mon Dec 19 02:20:46 2011 2011-Dec-19 02:20:46 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-19 02:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:20:53 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2011-Dec-19 02:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:21:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:21:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.896 1.097 0.931 0.941 2011-Dec-19 02:21:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 0.992 1.080 0.898 2011-Dec-19 02:21:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.859 0.890 0.980 1.126 2011-Dec-19 02:21:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.943 0.014 1.028 0.014 2011-Dec-19 02:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-19 02:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-19 02:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-19 02:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-19 02:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-19 02:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-19 02:22:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:22:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.906 1.105 0.930 0.941 2011-Dec-19 02:22:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 0.991 1.080 0.899 2011-Dec-19 02:22:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.857 0.889 0.979 1.124 2011-Dec-19 02:22:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.014 1.026 0.014 2011-Dec-19 02:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-19 02:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-19 02:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-19 02:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-19 02:23:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:23:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.897 1.097 0.932 0.939 2011-Dec-19 02:23:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 0.991 1.088 0.904 2011-Dec-19 02:23:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.859 0.891 0.979 1.125 2011-Dec-19 02:23:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.014 1.027 0.014 2011-Dec-19 02:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-19 02:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-19 02:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-19 02:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-19 02:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-19 02:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-19 02:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-19 02:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-19 02:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:24:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:24:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.898 1.100 0.932 0.940 2011-Dec-19 02:24:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 0.992 1.084 0.902 2011-Dec-19 02:24:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.860 0.892 0.979 1.126 2011-Dec-19 02:24:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.014 1.026 0.014 2011-Dec-19 02:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-19 02:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:25:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:25:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.896 1.099 0.931 0.941 2011-Dec-19 02:25:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 0.992 1.082 0.902 2011-Dec-19 02:25:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.859 0.892 0.984 1.129 2011-Dec-19 02:25:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.014 1.026 0.014 2011-Dec-19 02:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-19 02:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:26:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:26:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:26:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.896 1.095 0.929 0.942 2011-Dec-19 02:26:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 0.994 1.082 0.900 2011-Dec-19 02:26:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.860 0.895 0.978 1.128 2011-Dec-19 02:26:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.014 1.025 0.014 2011-Dec-19 02:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:27:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:27:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.895 1.100 0.931 0.945 2011-Dec-19 02:27:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 0.992 1.081 0.901 2011-Dec-19 02:27:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.858 0.894 0.978 1.129 2011-Dec-19 02:27:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.014 1.028 0.014 2011-Dec-19 02:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:28:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:28:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.893 1.098 0.928 0.941 2011-Dec-19 02:28:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 0.992 1.085 0.904 2011-Dec-19 02:28:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.859 0.893 0.977 1.130 2011-Dec-19 02:28:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.014 1.026 0.014 2011-Dec-19 02:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-19 02:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-19 02:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:29:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:29:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.895 1.097 0.930 0.941 2011-Dec-19 02:29:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 0.992 1.083 0.901 2011-Dec-19 02:29:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.858 0.893 0.980 1.131 2011-Dec-19 02:29:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.014 1.025 0.014 2011-Dec-19 02:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:30:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:30:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.894 1.098 0.931 0.941 2011-Dec-19 02:30:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.926 0.993 1.083 0.902 2011-Dec-19 02:30:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.858 0.894 0.979 1.131 2011-Dec-19 02:30:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.014 1.028 0.014 2011-Dec-19 02:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:31:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:31:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.897 1.100 0.930 0.942 2011-Dec-19 02:31:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.928 0.997 1.086 0.903 2011-Dec-19 02:31:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.857 0.892 0.980 1.129 2011-Dec-19 02:31:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.014 1.025 0.014 2011-Dec-19 02:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-19 02:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-19 02:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-19 02:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:32:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:32:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.901 1.102 0.944 0.957 2011-Dec-19 02:32:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 0.996 1.121 0.928 2011-Dec-19 02:32:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.859 0.895 0.985 1.131 2011-Dec-19 02:32:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.014 1.035 0.014 2011-Dec-19 02:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-19 02:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-19 02:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-19 02:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-19 02:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-19 02:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-19 02:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-19 02:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 02:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 02:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-19 02:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-19 02:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.154 (still bad) 2011-Dec-19 02:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.155 (still bad) 2011-Dec-19 02:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.153 (still bad) 2011-Dec-19 02:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-19 02:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-19 02:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 02:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 02:33:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:33:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.897 1.100 0.931 0.943 2011-Dec-19 02:33:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 0.996 1.087 0.903 2011-Dec-19 02:33:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.860 0.897 0.987 1.136 2011-Dec-19 02:33:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.014 1.029 0.014 2011-Dec-19 02:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-19 02:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-19 02:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 02:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-19 02:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 02:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 02:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-19 02:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-19 02:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:34:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:34:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.898 1.100 0.937 0.947 2011-Dec-19 02:34:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.932 1.001 1.088 0.904 2011-Dec-19 02:34:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.860 0.893 0.981 1.131 2011-Dec-19 02:34:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.014 1.028 0.014 2011-Dec-19 02:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:35:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:35:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.896 1.100 0.933 0.942 2011-Dec-19 02:35:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 0.993 1.085 0.901 2011-Dec-19 02:35:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.858 0.894 0.982 1.130 2011-Dec-19 02:35:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.014 1.035 0.014 2011-Dec-19 02:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:36:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:36:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.897 1.102 0.932 0.940 2011-Dec-19 02:36:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.929 0.993 1.087 0.901 2011-Dec-19 02:36:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.860 0.895 0.983 1.128 2011-Dec-19 02:36:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.014 1.027 0.014 2011-Dec-19 02:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 02:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-19 02:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-19 02:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-19 02:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-19 02:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:37:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:37:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.899 1.102 0.933 0.941 2011-Dec-19 02:37:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.933 0.994 1.109 0.919 2011-Dec-19 02:37:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.859 0.891 0.982 1.130 2011-Dec-19 02:37:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.943 0.014 1.031 0.014 2011-Dec-19 02:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-19 02:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 02:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-19 02:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-19 02:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-19 02:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-19 02:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 02:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 02:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 02:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-19 02:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-19 02:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-19 02:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-19 02:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 02:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 02:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 02:38:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:38:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.901 1.100 0.934 0.944 2011-Dec-19 02:38:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 1.000 1.090 0.903 2011-Dec-19 02:38:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.862 0.893 0.994 1.140 2011-Dec-19 02:38:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.014 1.031 0.014 2011-Dec-19 02:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 02:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 02:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 02:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-19 02:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-19 02:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-19 02:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-19 02:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-19 02:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-19 02:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 02:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 02:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 02:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 02:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 02:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 02:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-19 02:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-19 02:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-19 02:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-19 02:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:39:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:39:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.900 1.101 0.935 0.943 2011-Dec-19 02:39:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.932 0.995 1.092 0.906 2011-Dec-19 02:39:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.860 0.895 0.984 1.132 2011-Dec-19 02:39:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.014 1.031 0.014 2011-Dec-19 02:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-19 02:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 02:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-19 02:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-19 02:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-19 02:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-19 02:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 02:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 02:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 02:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 02:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 02:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-19 02:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-19 02:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-19 02:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-19 02:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-19 02:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-19 02:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-19 02:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-19 02:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-19 02:40:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:40:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.899 1.106 0.933 0.946 2011-Dec-19 02:40:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.929 0.995 1.088 0.903 2011-Dec-19 02:40:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.865 0.901 0.984 1.135 2011-Dec-19 02:40:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 0.014 1.030 0.014 2011-Dec-19 02:40:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-19 02:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-19 02:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-19 02:40:47 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-19 02:40:47 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-19 02:40:47 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-19 02:40:47 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2011-Dec-19 02:40:47 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-19 02:40:47 LOG5 end_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2011-Dec-19 02:40:47 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-19 02:40:47 LOG5 finish_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2011-Dec-19 02:40:47 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-19 02:40:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-19 02:40:47 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-19 02:40:47 LOG5 end_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2011-Dec-19 02:40:47 COMMAND run_command_line: EXECUTING command 20: 'ENDIF' 2011-Dec-19 02:40:47 COMMAND run_command_line: EXECUTING command 23: 'IF LSTSLEW(AGES3193_p3_036) < 093741 THEN' 2011-Dec-19 02:40:47 LOG3 is_if_valid: Current source data: rising 255.1 26.1 28 - - 191 3.9 2011-Dec-19 02:40:47 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_036) < 093741 2011-Dec-19 02:40:47 INFO5 is_if_valid: Condition parsed as: 8.1288879999999999 < 9.6280555555555551 2011-Dec-19 02:40:47 COMMAND run_command_line: EXECUTING command 24: 'FIXEDDRIFT az=218.49 alfaangle=-16.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_036 ra=95300.00 dec=230030.00' 2011-Dec-19 02:40:47 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-19 02:40:48 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-19 02:40:48 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 218.49 -16.5 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_036 95300.00 230030.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-19 02:40:48 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-19 02:40:48 LOG5 begin_task: Level: (2) ID = <10153> Status = 0 0 0 0 ok 2011-Dec-19 02:40:48 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_034' 2011-Dec-19 02:40:48 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-19 02:40:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_036} 2011-Dec-19 02:40:48 INFO3 fixed_driftmap: Sending telescope to Az = 218.49 and ZA = 5.93 2011-Dec-19 02:40:48 LOG3 track_source: Calling 'track_source AGES3193_p3_036 218.49 5.9252384333 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-19 02:40:48 START begin_task: Starting task 'sending tracking commands' 2011-Dec-19 02:40:48 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2011-Dec-19 02:40:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_036} INFO {Slewing to source 'AGES3193_p3_036' ...} 2011-Dec-19 02:40:48 INFO1 track_source: Starting to track AGES3193_p3_036 2011-Dec-19 02:40:48 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_036" 2011-Dec-19 02:40:48 LOG3 vw_send: To DATATAKING: set ra 218.49 2011-Dec-19 02:40:48 LOG3 vw_send: To DATATAKING: set dec 5.9252384333 2011-Dec-19 02:40:48 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-19 02:40:48 LOG3 vw_send: To DATATAKING: pnt tr 218.49 5.9252384333 -CF 2011-Dec-19 02:40:48 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 02:40:48 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-19 02:40:48 LOG5 finish_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2011-Dec-19 02:40:48 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-19 02:40:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 02:40:48 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-19 02:40:48 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2011-Dec-19 02:40:48 START begin_task: Starting task 'rotate ALFA to -16.5 degrees' 2011-Dec-19 02:40:48 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2011-Dec-19 02:40:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -16.5 degrees ...} 2011-Dec-19 02:40:48 INFO2 rotate_alfa: ALFA commanded to -16.5 degrees 2011-Dec-19 02:40:48 LOG3 sock_errsend: To ALFAMOTOR: POSITION -16.5 REPLY 2011-Dec-19 02:40:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-19 02:40:48 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-19 02:40:48 LOG5 begin_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2011-Dec-19 02:40:48 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_036" 2011-Dec-19 02:40:48 LOG4 got_cormsg: From DATATAKING: set ra 218.49 2011-Dec-19 02:40:48 LOG4 got_cormsg: From DATATAKING: set dec 5.9252384333 2011-Dec-19 02:40:48 LOG4 got_cormsg: From DATATAKING: vw% 218.49 2011-Dec-19 02:40:48 LOG4 got_cormsg: From DATATAKING: vw% 5.9252384333 2011-Dec-19 02:40:48 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 02:40:48 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-19 02:40:48 LOG4 got_cormsg: From DATATAKING: pnt tr 218.49 5.9252384333 -CF 2011-Dec-19 02:40:48 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 02:40:48 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-19 02:40:48 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 02:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-19 02:41:03 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-19 02:41:03 INFO3 alfa_motor: ALFA rotator in-position -16.50 degrees 2011-Dec-19 02:41:03 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-19 02:41:03 LOG5 end_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2011-Dec-19 02:41:03 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-19 02:41:03 STOP finish_task: Finishing task 'rotate ALFA to -16.5 degrees' 2011-Dec-19 02:41:03 LOG5 finish_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2011-Dec-19 02:41:03 INFO2 finish_task: DONE finished configuration: rotating ALFA to -16.5 degrees 2011-Dec-19 02:41:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 02:41:03 STOP end_task: Finishing task 'rotate ALFA to -16.5 degrees' with status 'OK' 2011-Dec-19 02:41:03 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2011-Dec-19 02:41:03 START begin_task: Starting task 'waiting on telescope' 2011-Dec-19 02:41:03 LOG5 begin_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2011-Dec-19 02:41:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-19 02:41:03 LOG3 waittrk: Start waittrk 5 2011-Dec-19 02:41:03 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-19 02:41:03 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2011-Dec-19 02:41:08 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-19 02:41:08 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2011-Dec-19 02:41:08 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-19 02:41:08 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2011-Dec-19 02:42:39 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 02:42:39.296 (seconds: 9759.296)!} 2011-Dec-19 02:42:39 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 02:42:39.296 (seconds: 9759.296)! 2011-Dec-19 02:42:45 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-19 02:42:45 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2011-Dec-19 02:42:45 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-19 02:42:45 INFO2 waittrk: Now tracking AGES3193_p3_036 2011-Dec-19 02:42:45 LOG4 waittrk: Current telescope position: Az = 218.03 ZA = 5.94 2011-Dec-19 02:42:45 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-19 02:42:45 LOG5 finish_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2011-Dec-19 02:42:45 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-19 02:42:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 02:42:45 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-19 02:42:45 LOG5 end_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2011-Dec-19 02:42:45 START begin_task: Starting task 'selecting calibration type' 2011-Dec-19 02:42:45 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2011-Dec-19 02:42:45 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-19 02:42:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-19 02:42:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 02:42:45 START begin_task: Starting task 'waiting on setcal' 2011-Dec-19 02:42:45 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2011-Dec-19 02:42:45 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-19 02:42:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 02:42:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 02:42:46 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-19 02:42:46 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-19 02:42:46 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2011-Dec-19 02:42:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-19 02:42:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-19 02:42:46 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-19 02:42:46 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-19 02:42:46 LOG5 begin_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2011-Dec-19 02:42:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 02:42:46 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-19 02:42:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-19 02:42:46 LOG5 end_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2011-Dec-19 02:42:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-19 02:42:46 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-19 02:42:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-19 02:42:46 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-19 02:42:46 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-19 02:42:46 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2011-Dec-19 02:42:46 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-19 02:42:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-19 02:42:46 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2011-Dec-19 02:42:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-19 02:42:46 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-19 02:42:46 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-19 02:42:46 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2011-Dec-19 02:42:47 LOG5 dopset_later: Calling 'dopset_later 0' 2011-Dec-19 02:42:47 INFO3 dopset_later: Setting Doppler correction now 2011-Dec-19 02:42:47 LOG5 antvel: Calling 'antvel 218.490000 5.925238 F Heliocentric 0' 2011-Dec-19 02:42:47 LOG2 antvel: Transforming current Az = 218.49 ZA = 5.93 to apparent RA = 08:21:50.5 Dec = +22:56:51.9 2011-Dec-19 02:42:47 LOG2 antvel: Parameters to Doppler: Heliocentric 24166 2011 353 0.0 2011-Dec-19 02:42:47 INFO5 antvel: Computed antenna velocity: -17.40931 km/s 2011-Dec-19 02:42:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-17.4093135426 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-19 02:42:47 INFO4 dopset_gen: New sky frequencies: 1381.323644 1381.323644 1381.323644 1381.323644 1381.323644 1381.323644 1381.323644 1381.323644 1381.323644 2011-Dec-19 02:42:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.323644 sky0=1381.323644 sky1=1381.323644 sky2=1381.323644 sky3=1381.323644 sky4=1381.323644 sky5=1381.323644 sky6=1381.323644 sky7=1381.323644 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-19 02:42:47 LOG2 dopset_gen: Result from 'sky2syn': 1631.323644 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-19 02:42:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631323644.0} 2011-Dec-19 02:42:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 02:42:47 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-19 02:42:47 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-19 02:42:47 INFO5 fixed_driftmap: Tracking J2000 position: RA = 08:21:11.2 Dec = +22:59:10.8 2011-Dec-19 02:42:47 LOG3 track_source: Calling 'track_source AGES3193_p3_036 082111.2 225910.8 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-19 02:42:47 START begin_task: Starting task 'sending tracking commands' 2011-Dec-19 02:42:47 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2011-Dec-19 02:42:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_036} INFO {Slewing to source 'AGES3193_p3_036' ...} 2011-Dec-19 02:42:47 INFO1 track_source: Starting to track AGES3193_p3_036 2011-Dec-19 02:42:47 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_036" 2011-Dec-19 02:42:47 LOG3 vw_send: To DATATAKING: set ra 082111.2 2011-Dec-19 02:42:47 LOG3 vw_send: To DATATAKING: set dec 225910.8 2011-Dec-19 02:42:47 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-19 02:42:47 LOG3 vw_send: To DATATAKING: pnt tr 082111.2 225910.8 -CJ 2011-Dec-19 02:42:47 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 02:42:47 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-19 02:42:47 LOG5 finish_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2011-Dec-19 02:42:47 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-19 02:42:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 02:42:47 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-19 02:42:47 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2011-Dec-19 02:42:47 START begin_task: Starting task 'waiting on telescope' 2011-Dec-19 02:42:47 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2011-Dec-19 02:42:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-19 02:42:47 LOG3 waittrk: Start waittrk 5 2011-Dec-19 02:42:47 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-19 02:42:47 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2011-Dec-19 02:42:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631323644.0} 2011-Dec-19 02:42:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 02:42:47 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 02:42:47 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_036" 2011-Dec-19 02:42:47 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 02:42:47 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 02:42:47 LOG4 got_cormsg: From DATATAKING: set ra 082111.2 2011-Dec-19 02:42:47 LOG4 got_cormsg: From DATATAKING: set dec 225910.8 2011-Dec-19 02:42:47 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-19 02:42:47 LOG4 got_cormsg: From DATATAKING: pnt tr 082111.2 225910.8 -CJ 2011-Dec-19 02:42:47 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 02:42:47 LOG4 got_cormsg: From DATATAKING: 082111.2 2011-Dec-19 02:42:47 LOG4 got_cormsg: From DATATAKING: vw% 225910.8 2011-Dec-19 02:42:47 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2011-Dec-19 02:42:52 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-19 02:42:52 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2011-Dec-19 02:42:52 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-19 02:42:52 LOG5 begin_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2011-Dec-19 02:42:58 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-19 02:42:58 LOG5 end_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2011-Dec-19 02:42:58 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-19 02:42:58 INFO2 waittrk: Now tracking AGES3193_p3_036 2011-Dec-19 02:42:58 LOG4 waittrk: Current telescope position: Az = 217.83 ZA = 5.92 2011-Dec-19 02:42:58 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-19 02:42:58 LOG5 finish_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2011-Dec-19 02:42:58 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-19 02:42:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 02:42:58 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-19 02:42:58 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2011-Dec-19 02:42:58 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-19 02:42:58 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2011-Dec-19 02:42:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-19 02:42:58 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-19 02:42:58 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-19 02:42:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-19 02:42:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 02:42:58 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-19 02:42:58 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2011-Dec-19 02:42:58 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-19 02:42:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 02:43:00 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 02:43:00 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-19 02:43:00 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-19 02:43:00 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2011-Dec-19 02:43:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-19 02:43:00 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-19 02:43:00 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2011-Dec-19 02:43:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-19 02:43:00 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 02:43:00 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 02:43:00 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 02:43:00 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 02:43:00 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-19 02:43:00 LOG5 begin_task: Level: (5) ID = <10171> Status = 0 0 0 0 ok 2011-Dec-19 02:43:00 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 02:43:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-19 02:43:00 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 8 6 dB 2011-Dec-19 02:43:00 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 3 dB 2011-Dec-19 02:43:00 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 3 dB 2011-Dec-19 02:43:00 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2011-Dec-19 02:43:00 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-19 02:43:00 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-19 02:43:00 LOG5 end_task: Level: (5) ID = <10171> Status = 0 0 0 0 ok 2011-Dec-19 02:43:01 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.097 1.083 ALFA beam 1: 0.902 0.933 2011-Dec-19 02:43:01 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.912 0.988 ALFA beam 3: 1.076 0.898 2011-Dec-19 02:43:01 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.858 1.103 ALFA beam 5: 0.944 1.082 2011-Dec-19 02:43:01 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.113 0.014 ALFA beam 7: 0.970 0.014 2011-Dec-19 02:43:01 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-19 02:43:01 LOG5 finish_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2011-Dec-19 02:43:01 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-19 02:43:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 02:43:01 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-19 02:43:01 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2011-Dec-19 02:43:01 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-19 02:43:01 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2011-Dec-19 02:43:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-19 02:43:01 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-19 02:43:01 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-19 02:43:01 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-19 02:43:01 LOG5 begin_task: Level: (5) ID = <10173> Status = 0 0 0 0 ok 2011-Dec-19 02:43:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:43:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.097 1.083 0.902 0.933 2011-Dec-19 02:43:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.912 0.988 1.076 0.898 2011-Dec-19 02:43:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.858 1.103 0.944 1.082 2011-Dec-19 02:43:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.113 0.014 0.970 0.014 2011-Dec-19 02:43:06 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.6 27.7 B 30.5 30.6 mn:A -0.0 -0.2 B -0.5 -0.4 gn: 11 11 2011-Dec-19 02:43:06 INFO3 from_mock: From MOCK: b0s1g0 rms:A 32.9 31.5 B 29.2 30.9 mn:A -0.0 -0.4 B -0.8 0.1 gn: 12 11 2011-Dec-19 02:43:06 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.7 28.8 B 33.3 29.1 mn:A 0.3 0.7 B 0.1 -0.0 gn: 7 11 2011-Dec-19 02:43:06 INFO3 from_mock: From MOCK: b1s1g0 rms:A 31.9 29.4 B 30.3 30.3 mn:A -0.3 -0.3 B 0.5 0.1 gn: 8 9 2011-Dec-19 02:43:07 INFO3 from_mock: From MOCK: b2s0g0 rms:A 32.2 31.2 B 28.2 29.5 mn:A -0.0 -0.3 B 0.3 -0.0 gn: 11 11 2011-Dec-19 02:43:07 INFO3 from_mock: From MOCK: b2s1g0 rms:A 30.6 30.9 B 29.1 27.1 mn:A 0.2 -0.2 B -0.0 0.1 gn: 11 11 2011-Dec-19 02:43:07 INFO3 from_mock: From MOCK: b3s0g0 rms:A 29.2 29.0 B 31.3 27.9 mn:A 0.4 -0.2 B 0.1 -0.2 gn: 12 12 2011-Dec-19 02:43:07 INFO3 from_mock: From MOCK: b3s1g0 rms:A 32.1 31.3 B 30.7 31.9 mn:A -0.2 0.4 B 0.1 0.1 gn: 12 12 2011-Dec-19 02:43:07 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.8 29.9 B 31.6 31.8 mn:A -0.3 -0.4 B -0.4 0.0 gn: 13 12 2011-Dec-19 02:43:07 INFO3 from_mock: From MOCK: b4s1g0 rms:A 30.5 27.6 B 31.2 30.1 mn:A -0.1 -0.1 B -0.4 0.1 gn: 15 13 2011-Dec-19 02:43:07 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.3 28.2 B 30.3 30.3 mn:A 0.7 0.4 B -0.0 0.4 gn: 12 11 2011-Dec-19 02:43:07 INFO3 from_mock: From MOCK: b5s1g0 rms:A 30.6 30.4 B 31.9 31.6 mn:A -0.3 0.3 B -0.1 0.1 gn: 12 11 2011-Dec-19 02:43:07 INFO3 from_mock: From MOCK: b6s0g0 rms:A 33.0 30.2 B 14.1 14.5 mn:A -0.4 0.1 B 0.4 -0.4 gn: 13 31 2011-Dec-19 02:43:07 INFO3 from_mock: From MOCK: b6s1g0 rms:A 32.7 29.7 B 11.1 10.8 mn:A 0.6 0.6 B 0.1 0.1 gn: 13 31 2011-Dec-19 02:43:07 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-19 02:43:07 LOG5 end_task: Level: (5) ID = <10173> Status = 0 0 0 0 ok 2011-Dec-19 02:43:07 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-19 02:43:07 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-19 02:43:07 LOG5 finish_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2011-Dec-19 02:43:07 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-19 02:43:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 02:43:07 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-19 02:43:07 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2011-Dec-19 02:43:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-19 02:43:07 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-19 02:43:07 LOG5 finish_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2011-Dec-19 02:43:07 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-19 02:43:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 02:43:07 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-19 02:43:07 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2011-Dec-19 02:43:07 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Edwin 2011-Dec-19 02:43:07 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Edwin 2011-Dec-19 02:43:07 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Edwin 2011-Dec-19 02:43:07 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Edwin 2011-Dec-19 02:43:07 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-19 02:43:07 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-19 02:43:07 LOG5 begin_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2011-Dec-19 02:43:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-19 02:43:07 START begin_task: Starting task 'selecting calibration type' 2011-Dec-19 02:43:07 LOG5 begin_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2011-Dec-19 02:43:07 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-19 02:43:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-19 02:43:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 02:43:07 START begin_task: Starting task 'waiting on setcal' 2011-Dec-19 02:43:07 LOG5 begin_task: Level: (5) ID = <10176> Status = 0 0 0 0 ok 2011-Dec-19 02:43:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Edwin' 2011-Dec-19 02:43:07 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-19 02:43:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 02:43:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 02:43:07 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-19 02:43:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-19 02:43:07 LOG5 end_task: Level: (5) ID = <10176> Status = 0 0 0 0 ok 2011-Dec-19 02:43:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-19 02:43:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-19 02:43:07 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-19 02:43:07 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-19 02:43:07 LOG5 begin_task: Level: (5) ID = <10177> Status = 0 0 0 0 ok 2011-Dec-19 02:43:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 02:43:07 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-19 02:43:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-19 02:43:07 LOG5 end_task: Level: (5) ID = <10177> Status = 0 0 0 0 ok 2011-Dec-19 02:43:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-19 02:43:07 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-19 02:43:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-19 02:43:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-19 02:43:07 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-19 02:43:07 LOG5 begin_task: Level: (5) ID = <10178> Status = 0 0 0 0 ok 2011-Dec-19 02:43:08 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-19 02:43:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-19 02:43:08 LOG5 end_task: Level: (5) ID = <10178> Status = 0 0 0 0 ok 2011-Dec-19 02:43:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-19 02:43:08 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-19 02:43:08 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-19 02:43:08 LOG5 end_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2011-Dec-19 02:43:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-19 02:43:08 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-19 02:43:08 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-19 02:43:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-19 02:43:08 LOG5 begin_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2011-Dec-19 02:43:08 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-19 02:43:08 NOTE WAPPDATA-new_file: New FITS file: wapp.20111219.a2048.0003.fits 2011-Dec-19 02:43:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-19 02:43:08 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111219.a2048.0003.fits} 2011-Dec-19 02:43:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-19 02:43:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-19 02:43:08 LOG5 end_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2011-Dec-19 02:43:08 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-19 02:43:08 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-19 02:43:08 LOG5 begin_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2011-Dec-19 02:43:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-19 02:43:08 LOG5 log_alfabeam: Parameters: 8.3531111111111098 22.986333333333331 8.103162 2011.9667714591731 -16.500046 2011-Dec-19 02:43:08 LOG4 log_alfabeam: ALFABEAM 0 8.353111111111097 22.986333333333334 2011-Dec-19 02:43:08 LOG4 log_alfabeam: ALFABEAM 1 8.353395650236658 22.887757356657410 2011-Dec-19 02:43:08 LOG4 log_alfabeam: ALFABEAM 2 8.359405576117981 22.953452005878223 2011-Dec-19 02:43:08 LOG4 log_alfabeam: ALFABEAM 3 8.359086307349465 23.052790568618349 2011-Dec-19 02:43:08 LOG4 log_alfabeam: ALFABEAM 4 8.352699446160154 23.085377596474864 2011-Dec-19 02:43:08 LOG4 log_alfabeam: ALFABEAM 5 8.346804384238117 23.017581626194008 2011-Dec-19 02:43:08 LOG4 log_alfabeam: ALFABEAM 6 8.347180290664545 22.919291338366225 2011-Dec-19 02:43:08 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-19 02:43:08 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-19 02:43:08 LOG3 take_mock_data: PSET configuration: obsnm=Edwin 2011-Dec-19 02:43:08 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_036 2011-Dec-19 02:43:08 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-19 02:43:08 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-19 02:43:08 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-19 02:43:08 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-19 02:43:08 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-19 02:43:08 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-19 02:43:08 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-19 02:43:08 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-19 02:43:08 LOG3 take_mock_data: PSET configuration: patternid=135300015 2011-Dec-19 02:43:08 LOG3 take_mock_data: PSET configuration: scanid=135300016 2011-Dec-19 02:43:08 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-19 02:43:08 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-19 02:43:08 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-19 02:43:08 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456323644.0 2011-Dec-19 02:43:08 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306323644.0 2011-Dec-19 02:43:08 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-19 02:43:08 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-19 02:43:08 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Edwin:object=AGES3193_p3_036:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=135300015:scanid=135300016:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456323644.0:topobfreqhz=1306323644.0:filetype=1 2011-Dec-19 02:43:08 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-19 02:43:08 LOG5 begin_task: Level: (5) ID = <10181> Status = 0 0 0 0 ok 2011-Dec-19 02:43:08 LOG4 from_mock: From MOCK: psetok 2011-Dec-19 02:43:08 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-19 02:43:08 LOG5 end_task: Level: (5) ID = <10181> Status = 0 0 0 0 ok 2011-Dec-19 02:43:08 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-19 02:43:08 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-19 02:43:08 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-19 02:43:08 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-19 02:43:08 LOG5 begin_task: Level: (5) ID = <10182> Status = 0 0 0 0 ok 2011-Dec-19 02:43:08 LOG4 from_mock: From MOCK: starok 2011-Dec-19 02:43:08 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-19 02:43:08 LOG5 end_task: Level: (5) ID = <10182> Status = 0 0 0 0 ok 2011-Dec-19 02:43:08 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-19 02:43:08 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135300016 2011-Dec-19 02:43:09 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-19 02:43:09 LOG5 begin_task: Level: (5) ID = <10183> Status = 0 0 0 0 ok 2011-Dec-19 02:43:09 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-19 02:43:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-19 02:43:09 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-19 02:43:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-19 02:43:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24190.00 2011-Dec-19 02:43:10 INFO2 got_mock_message: Mock spectrometer start file number is 00600 2011-Dec-19 02:43:10 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-19 02:43:10 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-19 02:43:10 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-19 02:43:10 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-19 02:43:10 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-19 02:43:10 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-19 02:43:10 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-19 02:43:10 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-19 02:43:10 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-19 02:43:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-19 02:43:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-19 02:43:11 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-19 02:43:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 02:43:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 02:43:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 02:43:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 02:43:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 02:43:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 02:43:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 02:43:14 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:43:14.02 2011-Dec-19 02:43:14 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324276994.02 Mon Dec 19 02:43:14 2011 2011-Dec-19 02:43:14 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-19 02:43:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.323644 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-19 02:43:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.323644 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 02:43:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.323644 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 02:43:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.323644 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 02:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.529 (still bad) 2011-Dec-19 02:43:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.323644 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 02:43:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.323644 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 02:43:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.323644 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 02:43:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.323644 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-19 02:43:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.323644 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-19 02:43:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-19 02:43:19 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-19 02:43:20 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-19 02:43:20 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-19 02:43:20 LOG5 end_task: Level: (5) ID = <10183> Status = 0 0 0 0 ok 2011-Dec-19 02:43:20 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-19 02:43:20 LOG5 end_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2011-Dec-19 02:43:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-19 02:43:20 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-19 02:43:20 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-19 02:43:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-19 02:43:20 LOG5 begin_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2011-Dec-19 02:43:20 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-19 02:43:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-19 02:43:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-19 02:43:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-19 02:43:20 LOG5 end_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2011-Dec-19 02:43:20 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-19 02:43:20 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-19 02:43:20 LOG5 begin_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2011-Dec-19 02:43:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-19 02:43:20 LOG5 log_alfabeam: Parameters: 8.3531111111111098 22.986333333333331 8.106504 2011.9667718394301 -16.500046 2011-Dec-19 02:43:20 LOG4 log_alfabeam: ALFABEAM 0 8.353111111111103 22.986333333333334 2011-Dec-19 02:43:20 LOG4 log_alfabeam: ALFABEAM 1 8.353441123918600 22.887785804478447 2011-Dec-19 02:43:20 LOG4 log_alfabeam: ALFABEAM 2 8.359420717847099 22.954006747300863 2011-Dec-19 02:43:20 LOG4 log_alfabeam: ALFABEAM 3 8.359055380390759 23.053317583104150 2011-Dec-19 02:43:20 LOG4 log_alfabeam: ALFABEAM 4 8.352653053857674 23.085340160032064 2011-Dec-19 02:43:20 LOG4 log_alfabeam: ALFABEAM 5 8.346789978295973 23.017017915288417 2011-Dec-19 02:43:20 LOG4 log_alfabeam: ALFABEAM 6 8.347211675193616 22.918765603560505 2011-Dec-19 02:43:20 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-19 02:43:20 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-19 02:43:20 LOG3 take_mock_data: PSET configuration: obsnm=Edwin 2011-Dec-19 02:43:20 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_036 2011-Dec-19 02:43:20 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-19 02:43:20 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-19 02:43:20 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-19 02:43:20 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-19 02:43:20 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-19 02:43:20 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-19 02:43:20 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-19 02:43:20 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-19 02:43:20 LOG3 take_mock_data: PSET configuration: patternid=135300015 2011-Dec-19 02:43:20 LOG3 take_mock_data: PSET configuration: scanid=135300017 2011-Dec-19 02:43:20 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-19 02:43:20 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-19 02:43:20 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-19 02:43:20 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456323644.0 2011-Dec-19 02:43:20 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306323644.0 2011-Dec-19 02:43:20 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-19 02:43:20 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-19 02:43:20 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Edwin:object=AGES3193_p3_036:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=135300015:scanid=135300017:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456323644.0:topobfreqhz=1306323644.0:filetype=1 2011-Dec-19 02:43:20 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-19 02:43:20 LOG5 begin_task: Level: (5) ID = <10186> Status = 0 0 0 0 ok 2011-Dec-19 02:43:20 LOG4 from_mock: From MOCK: psetok 2011-Dec-19 02:43:20 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-19 02:43:20 LOG5 end_task: Level: (5) ID = <10186> Status = 0 0 0 0 ok 2011-Dec-19 02:43:20 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-19 02:43:20 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-19 02:43:20 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-19 02:43:20 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-19 02:43:20 LOG5 begin_task: Level: (5) ID = <10187> Status = 0 0 0 0 ok 2011-Dec-19 02:43:20 LOG4 from_mock: From MOCK: starok 2011-Dec-19 02:43:20 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-19 02:43:20 LOG5 end_task: Level: (5) ID = <10187> Status = 0 0 0 0 ok 2011-Dec-19 02:43:20 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-19 02:43:20 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135300017 2011-Dec-19 02:43:20 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-19 02:43:20 LOG5 begin_task: Level: (5) ID = <10188> Status = 0 0 0 0 ok 2011-Dec-19 02:43:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-19 02:43:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-19 02:43:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24201.00 2011-Dec-19 02:43:21 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-19 02:43:21 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-19 02:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.579 (still bad) 2011-Dec-19 02:43:23 INFO2 got_mock_message: Mock spectrometer start file number is 00700 2011-Dec-19 02:43:23 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-19 02:43:23 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-19 02:43:23 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-19 02:43:23 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-19 02:43:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-19 02:43:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-19 02:43:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-19 02:43:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-19 02:43:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-19 02:43:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-19 02:43:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-19 02:43:23 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-19 02:43:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 02:43:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 02:43:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 02:43:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 02:43:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 02:43:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 02:43:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 02:43:26 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:43:26.02 2011-Dec-19 02:43:26 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324277006.02 Mon Dec 19 02:43:26 2011 2011-Dec-19 02:43:26 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-19 02:43:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.323644 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-19 02:43:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.323644 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 02:43:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.323644 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 02:43:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.323644 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 02:43:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.323644 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 02:43:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.323644 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 02:43:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.323644 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 02:43:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.323644 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-19 02:43:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.323644 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-19 02:43:26 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-19 02:43:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-19 02:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:43:31 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-19 02:43:32 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-19 02:43:32 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-19 02:43:32 LOG5 end_task: Level: (5) ID = <10188> Status = 0 0 0 0 ok 2011-Dec-19 02:43:32 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-19 02:43:32 LOG5 end_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2011-Dec-19 02:43:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-19 02:43:32 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-19 02:43:32 LOG5 finish_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2011-Dec-19 02:43:32 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-19 02:43:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 02:43:32 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-19 02:43:32 LOG5 end_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2011-Dec-19 02:43:32 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-19 02:43:32 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 218.49 and ZA = 5.93 2011-Dec-19 02:43:32 LOG3 track_source: Calling 'track_source AGES3193_p3_036 218.49 5.9252384333 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-19 02:43:32 START begin_task: Starting task 'sending tracking commands' 2011-Dec-19 02:43:32 LOG5 begin_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2011-Dec-19 02:43:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_036} INFO {Slewing to source 'AGES3193_p3_036' ...} 2011-Dec-19 02:43:32 INFO1 track_source: Starting to track AGES3193_p3_036 2011-Dec-19 02:43:32 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_036" 2011-Dec-19 02:43:32 LOG3 vw_send: To DATATAKING: set ra 218.49 2011-Dec-19 02:43:32 LOG3 vw_send: To DATATAKING: set dec 5.9252384333 2011-Dec-19 02:43:32 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-19 02:43:32 LOG3 vw_send: To DATATAKING: pnt tr 218.49 5.9252384333 -CF 2011-Dec-19 02:43:32 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 02:43:32 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-19 02:43:32 LOG5 finish_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2011-Dec-19 02:43:32 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-19 02:43:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 02:43:32 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-19 02:43:32 LOG5 end_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2011-Dec-19 02:43:32 LOG1 fixed_driftmap: Parameters: HA = -00:16:00.2 Start = 09:37:41.9 LST = 08:06:35.4 diff = 5466.5 secs 2011-Dec-19 02:43:32 WARNING fixed_driftmap: WARNING RA is more than 1 hour away --- starting anyway! 2011-Dec-19 02:43:32 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-19 02:43:32 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-19 02:43:32 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-19 02:43:32 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-19 02:43:32 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-19 02:43:32 LOG5 begin_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2011-Dec-19 02:43:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-19 02:43:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-19 02:43:32 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-19 02:43:32 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-19 02:43:32 LOG3 take_mock_data: PSET configuration: obsnm=Edwin 2011-Dec-19 02:43:32 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_036 2011-Dec-19 02:43:32 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-19 02:43:32 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-19 02:43:32 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-19 02:43:32 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-19 02:43:32 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-19 02:43:32 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-19 02:43:32 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-19 02:43:32 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-19 02:43:32 LOG3 take_mock_data: PSET configuration: patternid=135300018 2011-Dec-19 02:43:32 LOG3 take_mock_data: PSET configuration: scanid=135300018 2011-Dec-19 02:43:32 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-19 02:43:32 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-19 02:43:32 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-19 02:43:32 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456323644.0 2011-Dec-19 02:43:32 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306323644.0 2011-Dec-19 02:43:32 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-19 02:43:32 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-19 02:43:32 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Edwin:object=AGES3193_p3_036:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=135300018:scanid=135300018:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456323644.0:topobfreqhz=1306323644.0:filetype=1 2011-Dec-19 02:43:32 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-19 02:43:32 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2011-Dec-19 02:43:32 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_036" 2011-Dec-19 02:43:32 LOG4 got_cormsg: From DATATAKING: set ra 218.49 2011-Dec-19 02:43:32 LOG4 from_mock: From MOCK: psetok 2011-Dec-19 02:43:32 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-19 02:43:32 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2011-Dec-19 02:43:32 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-19 02:43:32 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-19 02:43:32 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-19 02:43:32 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-19 02:43:32 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2011-Dec-19 02:43:32 LOG4 got_cormsg: From DATATAKING: set dec 5.9252384333 2011-Dec-19 02:43:32 LOG4 got_cormsg: From DATATAKING: vw% 218.49 2011-Dec-19 02:43:32 LOG4 from_mock: From MOCK: starok 2011-Dec-19 02:43:32 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-19 02:43:32 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2011-Dec-19 02:43:32 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-19 02:43:32 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 135300018 2011-Dec-19 02:43:33 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-19 02:43:33 LOG5 begin_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2011-Dec-19 02:43:33 LOG4 got_cormsg: From DATATAKING: vw% 5.9252384333 2011-Dec-19 02:43:33 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-19 02:43:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-19 02:43:33 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 02:43:33 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-19 02:43:33 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-19 02:43:33 LOG4 got_cormsg: From DATATAKING: pnt tr 218.49 5.9252384333 -CF 2011-Dec-19 02:43:33 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 02:43:33 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-19 02:43:33 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 02:43:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-19 02:43:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24214.00 2011-Dec-19 02:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:43:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.323644 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-19 02:43:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.323644 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 02:43:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.323644 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 02:43:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.323644 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 02:43:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.323644 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 02:43:35 INFO2 got_mock_message: Mock spectrometer start file number is 00800 2011-Dec-19 02:43:35 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-19 02:43:35 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1199.9 s 2011-Dec-19 02:43:35 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-19 02:43:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.323644 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 02:43:35 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-19 02:43:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.323644 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 02:43:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-19 02:43:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.323644 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-19 02:43:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-19 02:43:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-19 02:43:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-19 02:43:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-19 02:43:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-19 02:43:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-19 02:43:35 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-19 02:43:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 02:43:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 02:43:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 02:43:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.323644 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-19 02:43:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 02:43:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 02:43:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 02:43:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 02:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:43:36 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2011-Dec-19 02:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:43:38 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:43:38.02 2011-Dec-19 02:43:38 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324277018.02 Mon Dec 19 02:43:38 2011 2011-Dec-19 02:43:38 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-19 02:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:43:48 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2011-Dec-19 02:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:44:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:44:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.090 1.078 0.901 0.932 2011-Dec-19 02:44:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.910 0.992 1.068 0.894 2011-Dec-19 02:44:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.857 1.100 0.940 1.080 2011-Dec-19 02:44:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 0.014 0.967 0.014 2011-Dec-19 02:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:45:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:45:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.095 1.080 0.903 0.934 2011-Dec-19 02:45:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.909 0.986 1.070 0.895 2011-Dec-19 02:45:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.853 1.095 0.941 1.079 2011-Dec-19 02:45:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 0.014 0.966 0.014 2011-Dec-19 02:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:46:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:46:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.094 1.081 0.899 0.931 2011-Dec-19 02:46:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.909 0.989 1.066 0.894 2011-Dec-19 02:46:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.854 1.095 0.942 1.079 2011-Dec-19 02:46:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.111 0.014 0.968 0.014 2011-Dec-19 02:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 02:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 02:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:47:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:47:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.096 1.083 0.898 0.930 2011-Dec-19 02:47:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.909 0.988 1.067 0.895 2011-Dec-19 02:47:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.857 1.101 0.943 1.080 2011-Dec-19 02:47:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.112 0.014 0.970 0.014 2011-Dec-19 02:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 02:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:48:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:48:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.095 1.081 0.899 0.933 2011-Dec-19 02:48:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.907 0.986 1.066 0.895 2011-Dec-19 02:48:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.856 1.098 0.943 1.079 2011-Dec-19 02:48:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.111 0.014 0.969 0.014 2011-Dec-19 02:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 02:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:49:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:49:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.094 1.083 0.896 0.932 2011-Dec-19 02:49:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.905 0.988 1.065 0.896 2011-Dec-19 02:49:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.854 1.097 0.942 1.079 2011-Dec-19 02:49:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.110 0.014 0.967 0.014 2011-Dec-19 02:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-19 02:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 02:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 02:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-19 02:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 02:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-19 02:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 02:50:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:50:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.095 1.081 0.900 0.934 2011-Dec-19 02:50:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.906 0.989 1.065 0.895 2011-Dec-19 02:50:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.855 1.097 0.938 1.079 2011-Dec-19 02:50:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.107 0.014 0.965 0.014 2011-Dec-19 02:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 02:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-19 02:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 02:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 02:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 02:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-19 02:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 02:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:51:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:51:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.092 1.080 0.903 0.939 2011-Dec-19 02:51:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.902 0.987 1.064 0.896 2011-Dec-19 02:51:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.854 1.097 0.942 1.081 2011-Dec-19 02:51:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.110 0.014 0.966 0.014 2011-Dec-19 02:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-19 02:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 02:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-19 02:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 02:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 02:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 02:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 02:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 02:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-19 02:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-19 02:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-19 02:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-19 02:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 02:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 02:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-19 02:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 02:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 02:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:52:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:52:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.093 1.081 0.897 0.932 2011-Dec-19 02:52:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.906 0.987 1.064 0.896 2011-Dec-19 02:52:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.856 1.104 0.942 1.080 2011-Dec-19 02:52:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 0.014 0.967 0.014 2011-Dec-19 02:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-19 02:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 02:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:52:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:52:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:52:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:53:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:53:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:53:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:53:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:53:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.095 1.085 0.898 0.932 2011-Dec-19 02:53:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.905 0.990 1.065 0.895 2011-Dec-19 02:53:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.855 1.100 0.942 1.082 2011-Dec-19 02:53:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 0.014 0.967 0.014 2011-Dec-19 02:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 02:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 02:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 02:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:54:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:54:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:54:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:54:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:54:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.096 1.080 0.897 0.931 2011-Dec-19 02:54:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.906 0.989 1.066 0.896 2011-Dec-19 02:54:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.854 1.098 0.942 1.080 2011-Dec-19 02:54:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 0.014 0.965 0.014 2011-Dec-19 02:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:54:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 02:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 02:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 02:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 02:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 02:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 02:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 02:55:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:55:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.098 1.086 0.899 0.932 2011-Dec-19 02:55:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 0.999 1.070 0.898 2011-Dec-19 02:55:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.858 1.101 0.943 1.084 2011-Dec-19 02:55:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.113 0.014 0.968 0.014 2011-Dec-19 02:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 02:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 02:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 02:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:55:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 02:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 02:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 02:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 02:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 02:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-19 02:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-19 02:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-19 02:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-19 02:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-19 02:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-19 02:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-19 02:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-19 02:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-19 02:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-19 02:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-19 02:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 02:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-19 02:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 02:56:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:56:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 1.087 0.902 0.937 2011-Dec-19 02:56:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.913 0.994 1.072 0.899 2011-Dec-19 02:56:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.878 1.135 0.947 1.086 2011-Dec-19 02:56:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.139 0.014 0.993 0.014 2011-Dec-19 02:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 02:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 02:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-19 02:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-19 02:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-19 02:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-19 02:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-19 02:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-19 02:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-19 02:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-19 02:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-19 02:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 02:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 02:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 02:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 02:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:57:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:57:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.096 1.082 0.900 0.932 2011-Dec-19 02:57:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 0.995 1.067 0.896 2011-Dec-19 02:57:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.856 1.101 0.940 1.083 2011-Dec-19 02:57:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.111 0.014 0.969 0.014 2011-Dec-19 02:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-19 02:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 02:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 02:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 02:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 02:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 02:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-19 02:58:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:58:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.120 1.107 0.898 0.934 2011-Dec-19 02:58:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.911 0.990 1.068 0.896 2011-Dec-19 02:58:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.856 1.100 0.941 1.080 2011-Dec-19 02:58:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.113 0.014 0.969 0.014 2011-Dec-19 02:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 02:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 02:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-19 02:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-19 02:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-19 02:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-19 02:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-19 02:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-19 02:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 02:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 02:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 02:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 02:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 02:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:59:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 02:59:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.093 1.080 0.897 0.930 2011-Dec-19 02:59:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.907 0.988 1.066 0.894 2011-Dec-19 02:59:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.854 1.096 0.940 1.081 2011-Dec-19 02:59:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 0.014 0.966 0.014 2011-Dec-19 02:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 02:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 02:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 02:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-19 03:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-19 03:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:00:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:00:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.098 1.082 0.897 0.928 2011-Dec-19 03:00:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.909 0.987 1.066 0.893 2011-Dec-19 03:00:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.854 1.097 0.938 1.079 2011-Dec-19 03:00:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 0.014 0.966 0.014 2011-Dec-19 03:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-19 03:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 03:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-19 03:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-19 03:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 03:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-19 03:01:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:01:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.097 1.082 0.896 0.927 2011-Dec-19 03:01:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.908 0.986 1.066 0.893 2011-Dec-19 03:01:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.861 1.110 0.941 1.079 2011-Dec-19 03:01:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.107 0.014 0.966 0.014 2011-Dec-19 03:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-19 03:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-19 03:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:02:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:02:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.097 1.084 0.897 0.928 2011-Dec-19 03:02:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.908 0.985 1.064 0.893 2011-Dec-19 03:02:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.857 1.095 0.940 1.080 2011-Dec-19 03:02:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.107 0.014 0.965 0.014 2011-Dec-19 03:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-19 03:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-19 03:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:03:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:03:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.094 1.082 0.897 0.931 2011-Dec-19 03:03:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.908 0.988 1.066 0.895 2011-Dec-19 03:03:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.855 1.099 0.937 1.079 2011-Dec-19 03:03:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.107 0.014 0.964 0.014 2011-Dec-19 03:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:03:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-19 03:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:03:39 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-19 03:03:39 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-19 03:03:39 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-19 03:03:39 LOG5 end_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2011-Dec-19 03:03:39 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-19 03:03:39 LOG5 end_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2011-Dec-19 03:03:39 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-19 03:03:39 LOG5 finish_task: Level: (2) ID = <10153> Status = 0 0 0 0 ok 2011-Dec-19 03:03:39 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-19 03:03:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-19 03:03:39 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-19 03:03:39 LOG5 end_task: Level: (2) ID = <10153> Status = 0 0 0 0 ok 2011-Dec-19 03:03:39 COMMAND run_command_line: EXECUTING command 27: 'ENDIF' 2011-Dec-19 03:03:39 COMMAND run_command_line: EXECUTING command 30: 'IF LSTSLEW(AGES3193_p3_038) < 100341 THEN' 2011-Dec-19 03:03:39 LOG3 is_if_valid: Current source data: rising 253.7 20.8 5 - - 168 5.7 2011-Dec-19 03:03:39 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_038) < 100341 2011-Dec-19 03:03:39 INFO5 is_if_valid: Condition parsed as: 8.5410420000000009 < 10.061388888888889 2011-Dec-19 03:03:39 COMMAND run_command_line: EXECUTING command 31: 'FIXEDDRIFT az=153.19 alfaangle=43.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_038 ra=95300.00 dec=225730.00' 2011-Dec-19 03:03:39 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-19 03:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:03:40 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-19 03:03:40 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 153.19 43.4 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_038 95300.00 225730.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-19 03:03:40 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-19 03:03:40 LOG5 begin_task: Level: (2) ID = <10194> Status = 0 0 0 0 ok 2011-Dec-19 03:03:40 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_036' 2011-Dec-19 03:03:40 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-19 03:03:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_038} 2011-Dec-19 03:03:40 INFO3 fixed_driftmap: Sending telescope to Az = 153.19 and ZA = 5.11 2011-Dec-19 03:03:40 LOG3 track_source: Calling 'track_source AGES3193_p3_038 153.19 5.1103863585 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-19 03:03:40 START begin_task: Starting task 'sending tracking commands' 2011-Dec-19 03:03:40 LOG5 begin_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2011-Dec-19 03:03:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_038} INFO {Slewing to source 'AGES3193_p3_038' ...} 2011-Dec-19 03:03:40 INFO1 track_source: Starting to track AGES3193_p3_038 2011-Dec-19 03:03:40 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_038" 2011-Dec-19 03:03:40 LOG3 vw_send: To DATATAKING: set ra 153.19 2011-Dec-19 03:03:40 LOG3 vw_send: To DATATAKING: set dec 5.1103863585 2011-Dec-19 03:03:40 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-19 03:03:40 LOG3 vw_send: To DATATAKING: pnt tr 153.19 5.1103863585 -CF 2011-Dec-19 03:03:40 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 03:03:40 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-19 03:03:40 LOG5 finish_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2011-Dec-19 03:03:40 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-19 03:03:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 03:03:40 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-19 03:03:40 LOG5 end_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2011-Dec-19 03:03:40 START begin_task: Starting task 'rotate ALFA to +43.4 degrees' 2011-Dec-19 03:03:40 LOG5 begin_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2011-Dec-19 03:03:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +43.4 degrees ...} 2011-Dec-19 03:03:40 INFO2 rotate_alfa: ALFA commanded to +43.4 degrees 2011-Dec-19 03:03:40 LOG3 sock_errsend: To ALFAMOTOR: POSITION 43.4 REPLY 2011-Dec-19 03:03:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-19 03:03:40 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-19 03:03:40 LOG5 begin_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2011-Dec-19 03:03:40 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_038" 2011-Dec-19 03:03:40 LOG4 got_cormsg: From DATATAKING: set ra 153.19 2011-Dec-19 03:03:40 LOG4 got_cormsg: From DATATAKING: set dec 5.1103863585 2011-Dec-19 03:03:40 LOG4 got_cormsg: From DATATAKING: vw% 153.19 2011-Dec-19 03:03:40 LOG4 got_cormsg: From DATATAKING: vw% 5.1103863585 2011-Dec-19 03:03:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:03:40 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-19 03:03:40 LOG4 got_cormsg: From DATATAKING: pnt tr 153.19 5.1103863585 -CF 2011-Dec-19 03:03:40 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 03:03:40 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-19 03:03:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:04:14 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-19 03:04:14 INFO3 alfa_motor: ALFA rotator in-position +43.40 degrees 2011-Dec-19 03:04:14 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-19 03:04:14 LOG5 end_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2011-Dec-19 03:04:14 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-19 03:04:14 STOP finish_task: Finishing task 'rotate ALFA to +43.4 degrees' 2011-Dec-19 03:04:14 LOG5 finish_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2011-Dec-19 03:04:14 INFO2 finish_task: DONE finished configuration: rotating ALFA to +43.4 degrees 2011-Dec-19 03:04:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 03:04:14 STOP end_task: Finishing task 'rotate ALFA to +43.4 degrees' with status 'OK' 2011-Dec-19 03:04:14 LOG5 end_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2011-Dec-19 03:04:14 START begin_task: Starting task 'waiting on telescope' 2011-Dec-19 03:04:14 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2011-Dec-19 03:04:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-19 03:04:14 LOG3 waittrk: Start waittrk 5 2011-Dec-19 03:04:14 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-19 03:04:14 LOG5 begin_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2011-Dec-19 03:04:19 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-19 03:04:19 LOG5 end_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2011-Dec-19 03:04:19 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-19 03:04:19 LOG5 begin_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2011-Dec-19 03:06:29 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-19 03:06:29 LOG5 end_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2011-Dec-19 03:06:29 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-19 03:06:29 INFO2 waittrk: Now tracking AGES3193_p3_038 2011-Dec-19 03:06:29 LOG4 waittrk: Current telescope position: Az = 152.91 ZA = 5.12 2011-Dec-19 03:06:29 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-19 03:06:29 LOG5 finish_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2011-Dec-19 03:06:29 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-19 03:06:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 03:06:29 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-19 03:06:29 LOG5 end_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2011-Dec-19 03:06:29 START begin_task: Starting task 'selecting calibration type' 2011-Dec-19 03:06:29 LOG5 begin_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2011-Dec-19 03:06:29 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-19 03:06:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-19 03:06:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 03:06:29 START begin_task: Starting task 'waiting on setcal' 2011-Dec-19 03:06:29 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2011-Dec-19 03:06:29 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-19 03:06:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 03:06:30 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:06:30 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-19 03:06:30 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-19 03:06:30 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2011-Dec-19 03:06:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-19 03:06:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-19 03:06:30 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-19 03:06:30 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-19 03:06:30 LOG5 begin_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2011-Dec-19 03:06:30 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:06:30 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-19 03:06:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-19 03:06:30 LOG5 end_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2011-Dec-19 03:06:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-19 03:06:30 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-19 03:06:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-19 03:06:30 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-19 03:06:30 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-19 03:06:30 LOG5 begin_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2011-Dec-19 03:06:30 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-19 03:06:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-19 03:06:30 LOG5 end_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2011-Dec-19 03:06:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-19 03:06:30 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-19 03:06:30 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-19 03:06:30 LOG5 end_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2011-Dec-19 03:06:30 LOG5 dopset_later: Calling 'dopset_later 0' 2011-Dec-19 03:06:30 INFO3 dopset_later: Setting Doppler correction now 2011-Dec-19 03:06:30 LOG5 antvel: Calling 'antvel 153.190000 5.110386 F Heliocentric 0' 2011-Dec-19 03:06:30 LOG2 antvel: Transforming current Az = 153.19 ZA = 5.11 to apparent RA = 08:19:38.3 Dec = +22:53:52.0 2011-Dec-19 03:06:30 LOG2 antvel: Parameters to Doppler: Heliocentric 25590 2011 353 0.0 2011-Dec-19 03:06:30 INFO5 antvel: Computed antenna velocity: -17.14992 km/s 2011-Dec-19 03:06:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-17.149919148399999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-19 03:06:30 INFO4 dopset_gen: New sky frequencies: 1381.322448 1381.322448 1381.322448 1381.322448 1381.322448 1381.322448 1381.322448 1381.322448 1381.322448 2011-Dec-19 03:06:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.322448 sky0=1381.322448 sky1=1381.322448 sky2=1381.322448 sky3=1381.322448 sky4=1381.322448 sky5=1381.322448 sky6=1381.322448 sky7=1381.322448 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-19 03:06:30 LOG2 dopset_gen: Result from 'sky2syn': 1631.322448 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-19 03:06:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631322448.0} 2011-Dec-19 03:06:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 03:06:30 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-19 03:06:30 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-19 03:06:30 INFO5 fixed_driftmap: Tracking J2000 position: RA = 08:18:59.0 Dec = +22:56:09.0 2011-Dec-19 03:06:30 LOG3 track_source: Calling 'track_source AGES3193_p3_038 081859.0 225609.0 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-19 03:06:30 START begin_task: Starting task 'sending tracking commands' 2011-Dec-19 03:06:30 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2011-Dec-19 03:06:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_038} INFO {Slewing to source 'AGES3193_p3_038' ...} 2011-Dec-19 03:06:30 INFO1 track_source: Starting to track AGES3193_p3_038 2011-Dec-19 03:06:30 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_038" 2011-Dec-19 03:06:30 LOG3 vw_send: To DATATAKING: set ra 081859.0 2011-Dec-19 03:06:30 LOG3 vw_send: To DATATAKING: set dec 225609.0 2011-Dec-19 03:06:30 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-19 03:06:30 LOG3 vw_send: To DATATAKING: pnt tr 081859.0 225609.0 -CJ 2011-Dec-19 03:06:30 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 03:06:30 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-19 03:06:30 LOG5 finish_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2011-Dec-19 03:06:30 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-19 03:06:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 03:06:30 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-19 03:06:30 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2011-Dec-19 03:06:30 START begin_task: Starting task 'waiting on telescope' 2011-Dec-19 03:06:30 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2011-Dec-19 03:06:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-19 03:06:30 LOG3 waittrk: Start waittrk 5 2011-Dec-19 03:06:30 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-19 03:06:30 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2011-Dec-19 03:06:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631322448.0} 2011-Dec-19 03:06:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 03:06:30 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_038" 2011-Dec-19 03:06:30 LOG4 got_cormsg: From DATATAKING: set ra 081859.0 2011-Dec-19 03:06:30 LOG4 got_cormsg: From DATATAKING: set dec 225609.0 2011-Dec-19 03:06:30 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-19 03:06:30 LOG4 got_cormsg: From DATATAKING: vw% 081859.0 2011-Dec-19 03:06:30 LOG4 got_cormsg: From DATATAKING: vw% 225609.0 2011-Dec-19 03:06:30 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:06:30 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-19 03:06:30 LOG4 got_cormsg: From DATATAKING: pnt tr 081859.0 225609.0 -CJ 2011-Dec-19 03:06:30 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 03:06:30 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-19 03:06:31 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:06:35 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-19 03:06:35 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2011-Dec-19 03:06:35 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-19 03:06:35 LOG5 begin_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2011-Dec-19 03:06:43 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-19 03:06:43 LOG5 end_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2011-Dec-19 03:06:43 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-19 03:06:43 INFO2 waittrk: Now tracking AGES3193_p3_038 2011-Dec-19 03:06:43 LOG4 waittrk: Current telescope position: Az = 152.60 ZA = 5.14 2011-Dec-19 03:06:43 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-19 03:06:43 LOG5 finish_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2011-Dec-19 03:06:43 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-19 03:06:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 03:06:43 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-19 03:06:43 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2011-Dec-19 03:06:43 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-19 03:06:43 LOG5 begin_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2011-Dec-19 03:06:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-19 03:06:43 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-19 03:06:43 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-19 03:06:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-19 03:06:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 03:06:43 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-19 03:06:43 LOG5 begin_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2011-Dec-19 03:06:43 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-19 03:06:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 03:06:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:06:46 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-19 03:06:46 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-19 03:06:46 LOG5 end_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2011-Dec-19 03:06:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-19 03:06:46 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-19 03:06:46 LOG5 begin_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2011-Dec-19 03:06:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-19 03:06:46 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 03:06:46 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 03:06:46 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 03:06:46 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 03:06:46 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-19 03:06:46 LOG5 begin_task: Level: (5) ID = <10212> Status = 0 0 0 0 ok 2011-Dec-19 03:06:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:06:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-19 03:06:46 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 7 6 dB 2011-Dec-19 03:06:46 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 3 dB 2011-Dec-19 03:06:46 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 3 dB 2011-Dec-19 03:06:46 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2011-Dec-19 03:06:46 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-19 03:06:46 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-19 03:06:46 LOG5 end_task: Level: (5) ID = <10212> Status = 0 0 0 0 ok 2011-Dec-19 03:06:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.094 1.104 ALFA beam 1: 1.136 0.950 2011-Dec-19 03:06:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.918 1.010 ALFA beam 3: 1.064 0.899 2011-Dec-19 03:06:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.857 1.117 ALFA beam 5: 0.920 1.088 2011-Dec-19 03:06:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.063 0.014 ALFA beam 7: 0.927 0.014 2011-Dec-19 03:06:47 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-19 03:06:47 LOG5 finish_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2011-Dec-19 03:06:47 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-19 03:06:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 03:06:47 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-19 03:06:47 LOG5 end_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2011-Dec-19 03:06:47 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-19 03:06:47 LOG5 begin_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2011-Dec-19 03:06:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-19 03:06:47 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-19 03:06:47 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-19 03:06:47 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-19 03:06:47 LOG5 begin_task: Level: (5) ID = <10214> Status = 0 0 0 0 ok 2011-Dec-19 03:06:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:06:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.094 1.104 1.136 0.950 2011-Dec-19 03:06:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 1.010 1.064 0.899 2011-Dec-19 03:06:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.857 1.117 0.920 1.088 2011-Dec-19 03:06:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.063 0.014 0.927 0.014 2011-Dec-19 03:06:52 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.4 27.6 B 30.9 31.0 mn:A 0.0 0.0 B -0.4 -0.4 gn: 11 11 2011-Dec-19 03:06:52 INFO3 from_mock: From MOCK: b0s1g0 rms:A 31.7 30.3 B 28.8 30.5 mn:A 0.0 -0.4 B -0.7 0.1 gn: 12 11 2011-Dec-19 03:06:52 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.5 28.5 B 33.6 29.5 mn:A 0.3 0.6 B 0.2 -0.1 gn: 7 11 2011-Dec-19 03:06:52 INFO3 from_mock: From MOCK: b1s1g0 rms:A 30.1 27.7 B 31.8 31.8 mn:A -0.4 -0.4 B 0.5 0.2 gn: 8 10 2011-Dec-19 03:06:52 INFO3 from_mock: From MOCK: b2s0g0 rms:A 28.9 28.0 B 28.6 29.9 mn:A 0.1 -0.3 B 0.3 -0.0 gn: 10 11 2011-Dec-19 03:06:52 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.7 30.0 B 33.2 30.8 mn:A 0.2 -0.4 B -0.2 0.1 gn: 11 12 2011-Dec-19 03:06:52 INFO3 from_mock: From MOCK: b3s0g0 rms:A 29.2 29.0 B 31.4 28.0 mn:A 0.3 -0.3 B 0.0 -0.2 gn: 12 12 2011-Dec-19 03:06:52 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.5 29.8 B 29.9 31.1 mn:A -0.2 0.3 B 0.2 0.2 gn: 12 12 2011-Dec-19 03:06:52 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.8 29.9 B 28.1 28.3 mn:A -0.2 -0.4 B -0.4 0.0 gn: 13 11 2011-Dec-19 03:06:52 INFO3 from_mock: From MOCK: b4s1g0 rms:A 32.9 29.8 B 30.7 29.6 mn:A -0.1 -0.1 B -0.4 0.1 gn: 16 13 2011-Dec-19 03:06:52 INFO3 from_mock: From MOCK: b5s0g0 rms:A 28.9 27.8 B 30.4 30.4 mn:A 0.5 0.4 B -0.0 0.4 gn: 12 11 2011-Dec-19 03:06:52 INFO3 from_mock: From MOCK: b5s1g0 rms:A 29.2 28.9 B 30.7 30.5 mn:A -0.4 0.3 B -0.0 0.1 gn: 12 11 2011-Dec-19 03:06:52 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.2 29.5 B 14.4 14.8 mn:A -0.5 0.2 B 0.3 -0.4 gn: 13 31 2011-Dec-19 03:06:52 INFO3 from_mock: From MOCK: b6s1g0 rms:A 32.8 29.8 B 11.4 11.1 mn:A 0.7 0.6 B 0.0 0.2 gn: 14 31 2011-Dec-19 03:06:52 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-19 03:06:52 LOG5 end_task: Level: (5) ID = <10214> Status = 0 0 0 0 ok 2011-Dec-19 03:06:52 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-19 03:06:52 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-19 03:06:52 LOG5 finish_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2011-Dec-19 03:06:52 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-19 03:06:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 03:06:52 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-19 03:06:52 LOG5 end_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2011-Dec-19 03:06:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-19 03:06:52 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-19 03:06:52 LOG5 finish_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2011-Dec-19 03:06:52 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-19 03:06:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 03:06:53 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-19 03:06:53 LOG5 end_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2011-Dec-19 03:06:53 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Edwin 2011-Dec-19 03:06:53 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Edwin 2011-Dec-19 03:06:53 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Edwin 2011-Dec-19 03:06:53 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Edwin 2011-Dec-19 03:06:53 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-19 03:06:53 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-19 03:06:53 LOG5 begin_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2011-Dec-19 03:06:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-19 03:06:53 START begin_task: Starting task 'selecting calibration type' 2011-Dec-19 03:06:53 LOG5 begin_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2011-Dec-19 03:06:53 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-19 03:06:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-19 03:06:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 03:06:53 START begin_task: Starting task 'waiting on setcal' 2011-Dec-19 03:06:53 LOG5 begin_task: Level: (5) ID = <10217> Status = 0 0 0 0 ok 2011-Dec-19 03:06:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Edwin' 2011-Dec-19 03:06:53 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-19 03:06:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 03:06:53 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:06:53 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-19 03:06:53 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-19 03:06:53 LOG5 end_task: Level: (5) ID = <10217> Status = 0 0 0 0 ok 2011-Dec-19 03:06:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-19 03:06:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-19 03:06:53 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-19 03:06:53 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-19 03:06:53 LOG5 begin_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2011-Dec-19 03:06:53 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:06:53 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-19 03:06:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-19 03:06:53 LOG5 end_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2011-Dec-19 03:06:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-19 03:06:53 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-19 03:06:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-19 03:06:53 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-19 03:06:53 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-19 03:06:53 LOG5 begin_task: Level: (5) ID = <10219> Status = 0 0 0 0 ok 2011-Dec-19 03:06:53 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-19 03:06:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-19 03:06:53 LOG5 end_task: Level: (5) ID = <10219> Status = 0 0 0 0 ok 2011-Dec-19 03:06:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-19 03:06:53 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-19 03:06:53 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-19 03:06:53 LOG5 end_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2011-Dec-19 03:06:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-19 03:06:53 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-19 03:06:53 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-19 03:06:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-19 03:06:53 LOG5 begin_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2011-Dec-19 03:06:53 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-19 03:06:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-19 03:06:53 NOTE WAPPDATA-new_file: New FITS file: wapp.20111219.a2048.0004.fits 2011-Dec-19 03:06:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-19 03:06:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-19 03:06:53 LOG5 end_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2011-Dec-19 03:06:53 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-19 03:06:53 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-19 03:06:53 LOG5 begin_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2011-Dec-19 03:06:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-19 03:06:53 LOG5 log_alfabeam: Parameters: 8.3163888888888895 22.935833333333335 8.500357 2011.9668166463862 43.399921 2011-Dec-19 03:06:53 LOG4 log_alfabeam: ALFABEAM 0 8.316388888888907 22.935833333333338 2011-Dec-19 03:06:53 LOG4 log_alfabeam: ALFABEAM 1 8.318657316042819 22.834719576479046 2011-Dec-19 03:06:53 LOG4 log_alfabeam: ALFABEAM 2 8.323099872674021 22.902324532827269 2011-Dec-19 03:06:53 LOG4 log_alfabeam: ALFABEAM 3 8.320966304132719 23.004027507292712 2011-Dec-19 03:06:53 LOG4 log_alfabeam: ALFABEAM 4 8.314174289223091 23.037270607059728 2011-Dec-19 03:06:53 LOG4 log_alfabeam: ALFABEAM 5 8.309584244718275 22.967625701166590 2011-Dec-19 03:06:54 LOG4 log_alfabeam: ALFABEAM 6 8.311933260898993 22.866798461081704 2011-Dec-19 03:06:54 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-19 03:06:54 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-19 03:06:54 LOG3 take_mock_data: PSET configuration: obsnm=Edwin 2011-Dec-19 03:06:54 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_038 2011-Dec-19 03:06:54 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-19 03:06:54 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-19 03:06:54 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-19 03:06:54 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-19 03:06:54 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-19 03:06:54 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-19 03:06:54 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-19 03:06:54 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-19 03:06:54 LOG3 take_mock_data: PSET configuration: patternid=135300018 2011-Dec-19 03:06:54 LOG3 take_mock_data: PSET configuration: scanid=135300019 2011-Dec-19 03:06:54 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-19 03:06:54 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-19 03:06:54 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-19 03:06:54 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456322448.0 2011-Dec-19 03:06:54 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306322448.0 2011-Dec-19 03:06:54 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-19 03:06:54 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-19 03:06:54 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Edwin:object=AGES3193_p3_038:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=135300018:scanid=135300019:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456322448.0:topobfreqhz=1306322448.0:filetype=1 2011-Dec-19 03:06:54 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-19 03:06:54 LOG5 begin_task: Level: (5) ID = <10222> Status = 0 0 0 0 ok 2011-Dec-19 03:06:54 LOG4 from_mock: From MOCK: psetok 2011-Dec-19 03:06:54 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-19 03:06:54 LOG5 end_task: Level: (5) ID = <10222> Status = 0 0 0 0 ok 2011-Dec-19 03:06:54 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-19 03:06:54 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-19 03:06:54 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-19 03:06:54 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-19 03:06:54 LOG5 begin_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2011-Dec-19 03:06:54 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111219.a2048.0004.fits} 2011-Dec-19 03:06:54 LOG4 from_mock: From MOCK: starok 2011-Dec-19 03:06:54 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-19 03:06:54 LOG5 end_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2011-Dec-19 03:06:54 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-19 03:06:54 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135300019 2011-Dec-19 03:06:54 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-19 03:06:54 LOG5 begin_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2011-Dec-19 03:06:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-19 03:06:54 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-19 03:06:54 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-19 03:06:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-19 03:06:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25615.00 2011-Dec-19 03:06:56 INFO2 got_mock_message: Mock spectrometer start file number is 00900 2011-Dec-19 03:06:56 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-19 03:06:56 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-19 03:06:56 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-19 03:06:56 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-19 03:06:56 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-19 03:06:56 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-19 03:06:56 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-19 03:06:56 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-19 03:06:56 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-19 03:06:56 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-19 03:06:56 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-19 03:06:56 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-19 03:06:56 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:06:56 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:06:56 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:06:56 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:06:56 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:06:56 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:06:56 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:06:59 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:06:59.02 2011-Dec-19 03:06:59 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324278419.02 Mon Dec 19 03:06:59 2011 2011-Dec-19 03:06:59 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-19 03:07:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.322448 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-19 03:07:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.322448 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:07:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.322448 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:07:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.322448 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:07:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.322448 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:07:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.322448 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 03:07:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.322448 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 03:07:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.322448 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-19 03:07:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.322448 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-19 03:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-19 03:07:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-19 03:07:05 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-19 03:07:05 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-19 03:07:05 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-19 03:07:05 LOG5 end_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2011-Dec-19 03:07:05 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-19 03:07:05 LOG5 end_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2011-Dec-19 03:07:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-19 03:07:05 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-19 03:07:05 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-19 03:07:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-19 03:07:05 LOG5 begin_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2011-Dec-19 03:07:05 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-19 03:07:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-19 03:07:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-19 03:07:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-19 03:07:05 LOG5 end_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2011-Dec-19 03:07:05 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-19 03:07:05 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-19 03:07:05 LOG5 begin_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2011-Dec-19 03:07:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-19 03:07:05 LOG5 log_alfabeam: Parameters: 8.3163888888888895 22.935833333333335 8.503421 2011.9668169949553 43.399921 2011-Dec-19 03:07:05 LOG4 log_alfabeam: ALFABEAM 0 8.316388888888904 22.935833333333338 2011-Dec-19 03:07:05 LOG4 log_alfabeam: ALFABEAM 1 8.318711958350514 22.834956595439241 2011-Dec-19 03:07:05 LOG4 log_alfabeam: ALFABEAM 2 8.323118056282388 22.903023518628000 2011-Dec-19 03:07:05 LOG4 log_alfabeam: ALFABEAM 3 8.320928935535981 23.004501125759578 2011-Dec-19 03:07:05 LOG4 log_alfabeam: ALFABEAM 4 8.314119166349577 23.037037816697403 2011-Dec-19 03:07:05 LOG4 log_alfabeam: ALFABEAM 5 8.309567375607347 22.966923639662699 2011-Dec-19 03:07:05 LOG4 log_alfabeam: ALFABEAM 6 8.311970594341529 22.866340637435542 2011-Dec-19 03:07:05 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-19 03:07:05 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-19 03:07:05 LOG3 take_mock_data: PSET configuration: obsnm=Edwin 2011-Dec-19 03:07:05 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_038 2011-Dec-19 03:07:05 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-19 03:07:05 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-19 03:07:05 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-19 03:07:05 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-19 03:07:05 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-19 03:07:05 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-19 03:07:05 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-19 03:07:05 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-19 03:07:05 LOG3 take_mock_data: PSET configuration: patternid=135300018 2011-Dec-19 03:07:05 LOG3 take_mock_data: PSET configuration: scanid=135300020 2011-Dec-19 03:07:05 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-19 03:07:05 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-19 03:07:05 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-19 03:07:05 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456322448.0 2011-Dec-19 03:07:05 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306322448.0 2011-Dec-19 03:07:05 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-19 03:07:05 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-19 03:07:05 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Edwin:object=AGES3193_p3_038:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=135300018:scanid=135300020:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456322448.0:topobfreqhz=1306322448.0:filetype=1 2011-Dec-19 03:07:05 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-19 03:07:05 LOG5 begin_task: Level: (5) ID = <10227> Status = 0 0 0 0 ok 2011-Dec-19 03:07:05 LOG4 from_mock: From MOCK: psetok 2011-Dec-19 03:07:05 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-19 03:07:05 LOG5 end_task: Level: (5) ID = <10227> Status = 0 0 0 0 ok 2011-Dec-19 03:07:05 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-19 03:07:05 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-19 03:07:05 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-19 03:07:05 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-19 03:07:05 LOG5 begin_task: Level: (5) ID = <10228> Status = 0 0 0 0 ok 2011-Dec-19 03:07:05 LOG4 from_mock: From MOCK: starok 2011-Dec-19 03:07:05 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-19 03:07:05 LOG5 end_task: Level: (5) ID = <10228> Status = 0 0 0 0 ok 2011-Dec-19 03:07:05 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-19 03:07:05 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135300020 2011-Dec-19 03:07:05 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-19 03:07:05 LOG5 begin_task: Level: (5) ID = <10229> Status = 0 0 0 0 ok 2011-Dec-19 03:07:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-19 03:07:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-19 03:07:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25626.00 2011-Dec-19 03:07:06 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-19 03:07:06 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-19 03:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.580 (still bad) 2011-Dec-19 03:07:08 INFO2 got_mock_message: Mock spectrometer start file number is 01000 2011-Dec-19 03:07:08 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-19 03:07:08 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-19 03:07:08 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-19 03:07:08 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-19 03:07:08 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-19 03:07:08 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-19 03:07:08 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-19 03:07:08 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-19 03:07:08 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-19 03:07:08 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-19 03:07:08 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-19 03:07:08 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-19 03:07:08 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:07:08 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:07:08 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:07:08 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:07:08 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:07:08 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:07:08 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:07:11 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:07:11.02 2011-Dec-19 03:07:11 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324278431.02 Mon Dec 19 03:07:11 2011 2011-Dec-19 03:07:11 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-19 03:07:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.322448 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-19 03:07:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.322448 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:07:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.322448 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:07:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.322448 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:07:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.322448 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:07:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.322448 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 03:07:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.322448 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 03:07:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.322448 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-19 03:07:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.322448 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-19 03:07:11 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-19 03:07:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-19 03:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-19 03:07:17 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-19 03:07:17 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-19 03:07:17 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-19 03:07:17 LOG5 end_task: Level: (5) ID = <10229> Status = 0 0 0 0 ok 2011-Dec-19 03:07:17 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-19 03:07:17 LOG5 end_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2011-Dec-19 03:07:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-19 03:07:17 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-19 03:07:17 LOG5 finish_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2011-Dec-19 03:07:17 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-19 03:07:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 03:07:17 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-19 03:07:17 LOG5 end_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2011-Dec-19 03:07:17 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-19 03:07:17 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 153.19 and ZA = 5.11 2011-Dec-19 03:07:17 LOG3 track_source: Calling 'track_source AGES3193_p3_038 153.19 5.1103863585 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-19 03:07:17 START begin_task: Starting task 'sending tracking commands' 2011-Dec-19 03:07:17 LOG5 begin_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2011-Dec-19 03:07:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_038} INFO {Slewing to source 'AGES3193_p3_038' ...} 2011-Dec-19 03:07:17 INFO1 track_source: Starting to track AGES3193_p3_038 2011-Dec-19 03:07:17 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_038" 2011-Dec-19 03:07:17 LOG3 vw_send: To DATATAKING: set ra 153.19 2011-Dec-19 03:07:17 LOG3 vw_send: To DATATAKING: set dec 5.1103863585 2011-Dec-19 03:07:17 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-19 03:07:17 LOG3 vw_send: To DATATAKING: pnt tr 153.19 5.1103863585 -CF 2011-Dec-19 03:07:17 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 03:07:17 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-19 03:07:17 LOG5 finish_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2011-Dec-19 03:07:17 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-19 03:07:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 03:07:17 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-19 03:07:17 LOG5 end_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2011-Dec-19 03:07:17 LOG1 fixed_driftmap: Parameters: HA = +00:09:59.9 Start = 10:03:42.0 LST = 08:30:24.4 diff = 5597.7 secs 2011-Dec-19 03:07:17 WARNING fixed_driftmap: WARNING RA is more than 1 hour away --- starting anyway! 2011-Dec-19 03:07:17 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-19 03:07:17 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-19 03:07:17 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-19 03:07:17 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-19 03:07:17 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-19 03:07:17 LOG5 begin_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2011-Dec-19 03:07:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-19 03:07:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-19 03:07:17 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-19 03:07:17 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-19 03:07:17 LOG3 take_mock_data: PSET configuration: obsnm=Edwin 2011-Dec-19 03:07:17 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_038 2011-Dec-19 03:07:17 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-19 03:07:17 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-19 03:07:17 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-19 03:07:17 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-19 03:07:17 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-19 03:07:17 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-19 03:07:17 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-19 03:07:17 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-19 03:07:17 LOG3 take_mock_data: PSET configuration: patternid=135300021 2011-Dec-19 03:07:17 LOG3 take_mock_data: PSET configuration: scanid=135300021 2011-Dec-19 03:07:17 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-19 03:07:17 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-19 03:07:17 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-19 03:07:17 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456322448.0 2011-Dec-19 03:07:17 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306322448.0 2011-Dec-19 03:07:17 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-19 03:07:17 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-19 03:07:17 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Edwin:object=AGES3193_p3_038:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=135300021:scanid=135300021:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456322448.0:topobfreqhz=1306322448.0:filetype=1 2011-Dec-19 03:07:17 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-19 03:07:17 LOG5 begin_task: Level: (4) ID = <10232> Status = 0 0 0 0 ok 2011-Dec-19 03:07:17 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_038" 2011-Dec-19 03:07:17 LOG4 got_cormsg: From DATATAKING: set ra 153.19 2011-Dec-19 03:07:17 LOG4 from_mock: From MOCK: psetok 2011-Dec-19 03:07:17 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-19 03:07:17 LOG5 end_task: Level: (4) ID = <10232> Status = 0 0 0 0 ok 2011-Dec-19 03:07:17 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-19 03:07:17 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-19 03:07:17 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-19 03:07:17 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-19 03:07:17 LOG5 begin_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2011-Dec-19 03:07:17 LOG4 got_cormsg: From DATATAKING: set dec 5.1103863585 2011-Dec-19 03:07:17 LOG4 got_cormsg: From DATATAKING: vw% 153.19 2011-Dec-19 03:07:17 LOG4 from_mock: From MOCK: starok 2011-Dec-19 03:07:17 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-19 03:07:17 LOG5 end_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2011-Dec-19 03:07:17 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-19 03:07:17 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 135300021 2011-Dec-19 03:07:18 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-19 03:07:18 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2011-Dec-19 03:07:18 LOG4 got_cormsg: From DATATAKING: vw% 5.1103863585 2011-Dec-19 03:07:18 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-19 03:07:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-19 03:07:18 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:07:18 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-19 03:07:18 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-19 03:07:18 LOG4 got_cormsg: From DATATAKING: pnt tr 153.19 5.1103863585 -CF 2011-Dec-19 03:07:18 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 03:07:18 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-19 03:07:18 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:07:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-19 03:07:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25639.00 2011-Dec-19 03:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-19 03:07:20 INFO2 got_mock_message: Mock spectrometer start file number is 01100 2011-Dec-19 03:07:20 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-19 03:07:20 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1199.9 s 2011-Dec-19 03:07:20 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-19 03:07:20 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-19 03:07:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-19 03:07:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-19 03:07:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-19 03:07:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-19 03:07:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-19 03:07:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-19 03:07:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-19 03:07:20 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-19 03:07:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 03:07:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 03:07:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 03:07:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 03:07:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 03:07:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 03:07:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 03:07:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.322448 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-19 03:07:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.322448 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:07:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.322448 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:07:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.322448 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:07:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.322448 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:07:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.322448 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 03:07:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.322448 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 03:07:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.322448 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-19 03:07:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.322448 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-19 03:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-19 03:07:21 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2011-Dec-19 03:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-19 03:07:23 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:07:23.01 2011-Dec-19 03:07:23 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324278443.01 Mon Dec 19 03:07:23 2011 2011-Dec-19 03:07:23 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-19 03:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-19 03:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:07:33 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2011-Dec-19 03:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:07:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:07:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.092 1.138 0.947 2011-Dec-19 03:07:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 1.003 1.061 0.900 2011-Dec-19 03:07:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.859 1.122 0.919 1.089 2011-Dec-19 03:07:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.063 0.014 0.926 0.014 2011-Dec-19 03:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:08:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:08:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-19 03:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-19 03:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-19 03:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-19 03:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:08:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:08:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.095 1.141 0.948 2011-Dec-19 03:08:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 1.003 1.063 0.901 2011-Dec-19 03:08:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.856 1.118 0.919 1.087 2011-Dec-19 03:08:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.014 0.926 0.014 2011-Dec-19 03:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-19 03:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:09:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:09:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:09:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.094 1.140 0.947 2011-Dec-19 03:09:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.917 1.007 1.063 0.901 2011-Dec-19 03:09:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.858 1.124 0.919 1.086 2011-Dec-19 03:09:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.063 0.014 0.925 0.014 2011-Dec-19 03:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-19 03:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-19 03:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-19 03:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-19 03:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-19 03:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-19 03:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-19 03:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-19 03:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-19 03:10:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:10:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-19 03:10:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-19 03:10:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-19 03:10:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:10:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.094 1.151 0.956 2011-Dec-19 03:10:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 1.007 1.064 0.899 2011-Dec-19 03:10:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.856 1.121 0.932 1.103 2011-Dec-19 03:10:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.014 0.925 0.014 2011-Dec-19 03:10:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.153 (still bad) 2011-Dec-19 03:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.158 (still bad) 2011-Dec-19 03:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.161 (still bad) 2011-Dec-19 03:11:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.162 (still bad) 2011-Dec-19 03:11:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.156 (still bad) 2011-Dec-19 03:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.153 (still bad) 2011-Dec-19 03:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-19 03:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-19 03:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-19 03:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-19 03:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-19 03:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-19 03:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-19 03:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-19 03:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-19 03:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-19 03:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-19 03:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:11:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:11:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.093 1.141 0.946 2011-Dec-19 03:11:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 1.006 1.062 0.898 2011-Dec-19 03:11:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.856 1.118 0.919 1.085 2011-Dec-19 03:11:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.072 0.014 0.933 0.014 2011-Dec-19 03:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:12:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:12:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:12:37 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 03:12:37.303 (seconds: 11557.303)!} 2011-Dec-19 03:12:37 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 03:12:37.303 (seconds: 11557.303)! 2011-Dec-19 03:12:38 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 11556.0 to 11557.0! 2011-Dec-19 03:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:12:39 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (11556.0 - 11558.0)! 2011-Dec-19 03:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:12:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:12:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.088 1.143 0.946 2011-Dec-19 03:12:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 1.005 1.061 0.898 2011-Dec-19 03:12:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.854 1.118 0.918 1.083 2011-Dec-19 03:12:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.014 0.924 0.014 2011-Dec-19 03:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-19 03:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-19 03:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:13:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:13:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:13:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-19 03:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:13:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-19 03:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:13:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:13:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.093 1.139 0.946 2011-Dec-19 03:13:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 1.003 1.060 0.898 2011-Dec-19 03:13:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.853 1.118 0.914 1.084 2011-Dec-19 03:13:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.014 0.923 0.014 2011-Dec-19 03:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-19 03:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-19 03:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-19 03:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:15:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:15:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.091 1.136 0.947 2011-Dec-19 03:15:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.914 1.004 1.056 0.898 2011-Dec-19 03:15:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.852 1.117 0.915 1.085 2011-Dec-19 03:15:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.061 0.014 0.925 0.014 2011-Dec-19 03:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-19 03:15:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-19 03:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-19 03:15:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-19 03:15:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:15:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-19 03:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-19 03:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-19 03:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:15:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-19 03:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-19 03:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-19 03:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-19 03:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.157 (still bad) 2011-Dec-19 03:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.159 (still bad) 2011-Dec-19 03:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.160 (still bad) 2011-Dec-19 03:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.160 (still bad) 2011-Dec-19 03:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.158 (still bad) 2011-Dec-19 03:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.154 (still bad) 2011-Dec-19 03:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-19 03:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-19 03:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:16:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:16:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.095 1.139 0.950 2011-Dec-19 03:16:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.912 1.004 1.059 0.900 2011-Dec-19 03:16:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.852 1.117 0.913 1.085 2011-Dec-19 03:16:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.058 0.014 0.923 0.014 2011-Dec-19 03:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-19 03:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:16:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:16:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:16:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-19 03:16:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-19 03:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-19 03:16:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-19 03:16:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-19 03:16:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-19 03:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-19 03:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-19 03:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-19 03:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-19 03:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-19 03:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-19 03:17:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:17:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 1.093 1.151 0.958 2011-Dec-19 03:17:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 1.004 1.057 0.900 2011-Dec-19 03:17:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.853 1.119 0.917 1.090 2011-Dec-19 03:17:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.061 0.014 0.924 0.014 2011-Dec-19 03:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-19 03:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-19 03:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-19 03:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-19 03:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-19 03:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-19 03:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-19 03:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-19 03:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-19 03:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-19 03:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-19 03:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:18:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:18:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.093 1.138 0.947 2011-Dec-19 03:18:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 1.005 1.059 0.900 2011-Dec-19 03:18:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.852 1.121 0.917 1.088 2011-Dec-19 03:18:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 0.014 0.923 0.014 2011-Dec-19 03:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:19:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:19:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.095 1.140 0.947 2011-Dec-19 03:19:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 1.009 1.061 0.900 2011-Dec-19 03:19:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.853 1.121 0.917 1.090 2011-Dec-19 03:19:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 0.014 0.925 0.014 2011-Dec-19 03:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-19 03:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:20:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:20:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.099 1.140 0.947 2011-Dec-19 03:20:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 1.005 1.059 0.899 2011-Dec-19 03:20:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.853 1.119 0.916 1.089 2011-Dec-19 03:20:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 0.014 0.923 0.014 2011-Dec-19 03:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:20:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 256-511 errors 2011-Dec-19 03:20:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors PFB = 256-511 errors 2011-Dec-19 03:20:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC = 2-3 errors PFB = 256-511 errors 2011-Dec-19 03:20:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): ADC >= 4096 errors PFB = 256-511 errors 2011-Dec-19 03:20:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors PFB = 256-511 errors 2011-Dec-19 03:20:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors PFB = 256-511 errors 2011-Dec-19 03:20:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 256-511 errors 2011-Dec-19 03:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-19 03:20:16 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 32-63 errors 2011-Dec-19 03:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-19 03:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-19 03:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-19 03:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:21:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:21:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.095 1.140 0.946 2011-Dec-19 03:21:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.921 1.011 1.064 0.901 2011-Dec-19 03:21:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.854 1.120 0.916 1.088 2011-Dec-19 03:21:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.061 0.014 0.923 0.014 2011-Dec-19 03:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:22:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:22:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.088 1.108 1.140 0.948 2011-Dec-19 03:22:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 1.003 1.065 0.900 2011-Dec-19 03:22:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.856 1.123 0.921 1.092 2011-Dec-19 03:22:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 0.014 0.924 0.014 2011-Dec-19 03:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:23:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:23:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.093 1.141 0.945 2011-Dec-19 03:23:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 1.005 1.061 0.897 2011-Dec-19 03:23:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.854 1.118 0.918 1.091 2011-Dec-19 03:23:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 0.014 0.925 0.014 2011-Dec-19 03:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:24:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:24:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.091 1.110 1.138 0.943 2011-Dec-19 03:24:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.917 1.002 1.066 0.903 2011-Dec-19 03:24:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.854 1.118 0.917 1.088 2011-Dec-19 03:24:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.014 0.924 0.014 2011-Dec-19 03:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:25:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:25:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 1.093 1.140 0.944 2011-Dec-19 03:25:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 1.002 1.061 0.898 2011-Dec-19 03:25:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.853 1.116 0.920 1.089 2011-Dec-19 03:25:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.014 0.924 0.014 2011-Dec-19 03:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-19 03:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-19 03:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-19 03:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:26:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:26:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.098 1.139 0.943 2011-Dec-19 03:26:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 1.004 1.064 0.896 2011-Dec-19 03:26:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.855 1.117 0.914 1.085 2011-Dec-19 03:26:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.014 0.924 0.014 2011-Dec-19 03:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-19 03:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-19 03:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 03:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-19 03:27:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:27:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.093 1.140 0.944 2011-Dec-19 03:27:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.914 1.004 1.064 0.898 2011-Dec-19 03:27:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.857 1.123 0.919 1.086 2011-Dec-19 03:27:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.061 0.014 0.924 0.014 2011-Dec-19 03:27:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-19 03:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:27:24 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-19 03:27:24 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-19 03:27:24 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-19 03:27:24 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2011-Dec-19 03:27:24 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-19 03:27:24 LOG5 end_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2011-Dec-19 03:27:24 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-19 03:27:24 LOG5 finish_task: Level: (2) ID = <10194> Status = 0 0 0 0 ok 2011-Dec-19 03:27:24 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-19 03:27:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-19 03:27:24 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-19 03:27:24 LOG5 end_task: Level: (2) ID = <10194> Status = 0 0 0 0 ok 2011-Dec-19 03:27:24 COMMAND run_command_line: EXECUTING command 34: 'ENDIF' 2011-Dec-19 03:27:24 COMMAND run_command_line: EXECUTING command 37: 'IF LSTSLEW(AGES3193_p3_040) < 102711 THEN' 2011-Dec-19 03:27:24 LOG3 is_if_valid: Current source data: up 250.4 15.4 UP - - 145 4.3 2011-Dec-19 03:27:24 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_040) < 102711 2011-Dec-19 03:27:24 INFO5 is_if_valid: Condition parsed as: 8.9146256666666677 < 10.453055555555554 2011-Dec-19 03:27:24 COMMAND run_command_line: EXECUTING command 38: 'FIXEDDRIFT az=121.25 alfaangle=77.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_040 ra=95300.00 dec=225430.00' 2011-Dec-19 03:27:24 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-19 03:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-19 03:27:25 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-19 03:27:25 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 121.25 77.0 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_040 95300.00 225430.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-19 03:27:25 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-19 03:27:25 LOG5 begin_task: Level: (2) ID = <10235> Status = 0 0 0 0 ok 2011-Dec-19 03:27:25 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_038' 2011-Dec-19 03:27:25 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-19 03:27:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_040} 2011-Dec-19 03:27:25 INFO3 fixed_driftmap: Sending telescope to Az = 121.25 and ZA = 9.03 2011-Dec-19 03:27:25 LOG3 track_source: Calling 'track_source AGES3193_p3_040 121.25 9.0329300349 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-19 03:27:25 START begin_task: Starting task 'sending tracking commands' 2011-Dec-19 03:27:25 LOG5 begin_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2011-Dec-19 03:27:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_040} INFO {Slewing to source 'AGES3193_p3_040' ...} 2011-Dec-19 03:27:25 INFO1 track_source: Starting to track AGES3193_p3_040 2011-Dec-19 03:27:25 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_040" 2011-Dec-19 03:27:25 LOG3 vw_send: To DATATAKING: set ra 121.25 2011-Dec-19 03:27:25 LOG3 vw_send: To DATATAKING: set dec 9.0329300349 2011-Dec-19 03:27:25 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-19 03:27:25 LOG3 vw_send: To DATATAKING: pnt tr 121.25 9.0329300349 -CF 2011-Dec-19 03:27:25 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 03:27:25 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-19 03:27:25 LOG5 finish_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2011-Dec-19 03:27:25 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-19 03:27:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 03:27:25 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-19 03:27:25 LOG5 end_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2011-Dec-19 03:27:25 START begin_task: Starting task 'rotate ALFA to +77 degrees' 2011-Dec-19 03:27:25 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2011-Dec-19 03:27:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +77 degrees ...} 2011-Dec-19 03:27:25 INFO2 rotate_alfa: ALFA commanded to +77.0 degrees 2011-Dec-19 03:27:25 LOG3 sock_errsend: To ALFAMOTOR: POSITION 77.0 REPLY 2011-Dec-19 03:27:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-19 03:27:25 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-19 03:27:25 LOG5 begin_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2011-Dec-19 03:27:25 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_040" 2011-Dec-19 03:27:25 LOG4 got_cormsg: From DATATAKING: set ra 121.25 2011-Dec-19 03:27:25 LOG4 got_cormsg: From DATATAKING: set dec 9.0329300349 2011-Dec-19 03:27:25 LOG4 got_cormsg: From DATATAKING: vw% 121.25 2011-Dec-19 03:27:25 LOG4 got_cormsg: From DATATAKING: vw% 9.0329300349 2011-Dec-19 03:27:25 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:27:25 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-19 03:27:25 LOG4 got_cormsg: From DATATAKING: pnt tr 121.25 9.0329300349 -CF 2011-Dec-19 03:27:25 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 03:27:25 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-19 03:27:25 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:27:45 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-19 03:27:45 INFO3 alfa_motor: ALFA rotator in-position +77.00 degrees 2011-Dec-19 03:27:45 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-19 03:27:45 LOG5 end_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2011-Dec-19 03:27:45 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-19 03:27:45 STOP finish_task: Finishing task 'rotate ALFA to +77 degrees' 2011-Dec-19 03:27:45 LOG5 finish_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2011-Dec-19 03:27:45 INFO2 finish_task: DONE finished configuration: rotating ALFA to +77 degrees 2011-Dec-19 03:27:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 03:27:45 STOP end_task: Finishing task 'rotate ALFA to +77 degrees' with status 'OK' 2011-Dec-19 03:27:45 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2011-Dec-19 03:27:45 START begin_task: Starting task 'waiting on telescope' 2011-Dec-19 03:27:45 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2011-Dec-19 03:27:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-19 03:27:45 LOG3 waittrk: Start waittrk 5 2011-Dec-19 03:27:45 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-19 03:27:45 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2011-Dec-19 03:27:50 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-19 03:27:50 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2011-Dec-19 03:27:50 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-19 03:27:50 LOG5 begin_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2011-Dec-19 03:29:10 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-19 03:29:10 LOG5 end_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2011-Dec-19 03:29:10 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-19 03:29:10 INFO2 waittrk: Now tracking AGES3193_p3_040 2011-Dec-19 03:29:10 LOG4 waittrk: Current telescope position: Az = 121.01 ZA = 9.04 2011-Dec-19 03:29:10 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-19 03:29:10 LOG5 finish_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2011-Dec-19 03:29:10 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-19 03:29:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 03:29:10 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-19 03:29:10 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2011-Dec-19 03:29:10 START begin_task: Starting task 'selecting calibration type' 2011-Dec-19 03:29:10 LOG5 begin_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2011-Dec-19 03:29:10 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-19 03:29:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-19 03:29:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 03:29:10 START begin_task: Starting task 'waiting on setcal' 2011-Dec-19 03:29:10 LOG5 begin_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2011-Dec-19 03:29:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-19 03:29:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 03:29:11 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:29:11 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-19 03:29:11 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-19 03:29:11 LOG5 end_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2011-Dec-19 03:29:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-19 03:29:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-19 03:29:11 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-19 03:29:11 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-19 03:29:11 LOG5 begin_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2011-Dec-19 03:29:11 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:29:11 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-19 03:29:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-19 03:29:11 LOG5 end_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2011-Dec-19 03:29:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-19 03:29:11 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-19 03:29:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-19 03:29:11 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-19 03:29:11 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-19 03:29:11 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2011-Dec-19 03:29:11 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-19 03:29:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-19 03:29:11 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2011-Dec-19 03:29:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-19 03:29:11 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-19 03:29:11 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-19 03:29:11 LOG5 end_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2011-Dec-19 03:29:11 LOG5 dopset_later: Calling 'dopset_later 0' 2011-Dec-19 03:29:11 INFO3 dopset_later: Setting Doppler correction now 2011-Dec-19 03:29:11 LOG5 antvel: Calling 'antvel 121.250000 9.032930 F Heliocentric 0' 2011-Dec-19 03:29:11 LOG2 antvel: Transforming current Az = 121.25 ZA = 9.03 to apparent RA = 08:18:53.0 Dec = +22:50:52.0 2011-Dec-19 03:29:11 LOG2 antvel: Parameters to Doppler: Heliocentric 26951 2011 353 0.0 2011-Dec-19 03:29:11 INFO5 antvel: Computed antenna velocity: -17.03417 km/s 2011-Dec-19 03:29:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-17.034168609599998 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-19 03:29:11 INFO4 dopset_gen: New sky frequencies: 1381.321915 1381.321915 1381.321915 1381.321915 1381.321915 1381.321915 1381.321915 1381.321915 1381.321915 2011-Dec-19 03:29:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.321915 sky0=1381.321915 sky1=1381.321915 sky2=1381.321915 sky3=1381.321915 sky4=1381.321915 sky5=1381.321915 sky6=1381.321915 sky7=1381.321915 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-19 03:29:11 LOG2 dopset_gen: Result from 'sky2syn': 1631.321915 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-19 03:29:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631321915.0} 2011-Dec-19 03:29:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 03:29:11 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-19 03:29:11 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-19 03:29:11 INFO5 fixed_driftmap: Tracking J2000 position: RA = 08:18:13.6 Dec = +22:53:08.3 2011-Dec-19 03:29:11 LOG3 track_source: Calling 'track_source AGES3193_p3_040 081813.6 225308.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-19 03:29:11 START begin_task: Starting task 'sending tracking commands' 2011-Dec-19 03:29:11 LOG5 begin_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2011-Dec-19 03:29:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_040} INFO {Slewing to source 'AGES3193_p3_040' ...} 2011-Dec-19 03:29:11 INFO1 track_source: Starting to track AGES3193_p3_040 2011-Dec-19 03:29:11 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_040" 2011-Dec-19 03:29:11 LOG3 vw_send: To DATATAKING: set ra 081813.6 2011-Dec-19 03:29:11 LOG3 vw_send: To DATATAKING: set dec 225308.3 2011-Dec-19 03:29:11 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-19 03:29:11 LOG3 vw_send: To DATATAKING: pnt tr 081813.6 225308.3 -CJ 2011-Dec-19 03:29:11 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 03:29:11 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-19 03:29:11 LOG5 finish_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2011-Dec-19 03:29:11 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-19 03:29:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 03:29:11 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-19 03:29:11 LOG5 end_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2011-Dec-19 03:29:11 START begin_task: Starting task 'waiting on telescope' 2011-Dec-19 03:29:11 LOG5 begin_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2011-Dec-19 03:29:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-19 03:29:11 LOG3 waittrk: Start waittrk 5 2011-Dec-19 03:29:11 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-19 03:29:11 LOG5 begin_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2011-Dec-19 03:29:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631321915.0} 2011-Dec-19 03:29:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 03:29:11 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_040" 2011-Dec-19 03:29:11 LOG4 got_cormsg: From DATATAKING: set ra 081813.6 2011-Dec-19 03:29:11 LOG4 got_cormsg: From DATATAKING: set dec 225308.3 2011-Dec-19 03:29:11 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-19 03:29:11 LOG4 got_cormsg: From DATATAKING: vw% 081813.6 2011-Dec-19 03:29:11 LOG4 got_cormsg: From DATATAKING: vw% 225308.3 2011-Dec-19 03:29:12 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:29:12 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-19 03:29:12 LOG4 got_cormsg: From DATATAKING: pnt tr 081813.6 225308.3 -CJ 2011-Dec-19 03:29:12 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 03:29:12 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-19 03:29:12 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:29:16 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-19 03:29:16 LOG5 end_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2011-Dec-19 03:29:16 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-19 03:29:16 LOG5 begin_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2011-Dec-19 03:29:19 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-19 03:29:19 LOG5 end_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2011-Dec-19 03:29:19 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-19 03:29:19 INFO2 waittrk: Now tracking AGES3193_p3_040 2011-Dec-19 03:29:19 LOG4 waittrk: Current telescope position: Az = 120.96 ZA = 9.04 2011-Dec-19 03:29:19 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-19 03:29:19 LOG5 finish_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2011-Dec-19 03:29:19 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-19 03:29:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 03:29:19 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-19 03:29:19 LOG5 end_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2011-Dec-19 03:29:19 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-19 03:29:19 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2011-Dec-19 03:29:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-19 03:29:19 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-19 03:29:19 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-19 03:29:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-19 03:29:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 03:29:19 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-19 03:29:19 LOG5 begin_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2011-Dec-19 03:29:19 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-19 03:29:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 03:29:20 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:29:20 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-19 03:29:20 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-19 03:29:20 LOG5 end_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2011-Dec-19 03:29:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-19 03:29:20 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-19 03:29:20 LOG5 begin_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2011-Dec-19 03:29:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-19 03:29:20 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 03:29:20 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 03:29:20 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 03:29:20 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 03:29:20 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-19 03:29:20 LOG5 begin_task: Level: (5) ID = <10253> Status = 0 0 0 0 ok 2011-Dec-19 03:29:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-19 03:29:21 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:29:21 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 8 6 dB 2011-Dec-19 03:29:21 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 3 dB 2011-Dec-19 03:29:21 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 3 dB 2011-Dec-19 03:29:21 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2011-Dec-19 03:29:21 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-19 03:29:21 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-19 03:29:21 LOG5 end_task: Level: (5) ID = <10253> Status = 0 0 0 0 ok 2011-Dec-19 03:29:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.098 1.106 ALFA beam 1: 0.914 0.956 2011-Dec-19 03:29:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.964 1.036 ALFA beam 3: 1.095 0.902 2011-Dec-19 03:29:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.861 1.109 ALFA beam 5: 0.929 1.098 2011-Dec-19 03:29:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.074 0.014 ALFA beam 7: 0.934 0.014 2011-Dec-19 03:29:21 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-19 03:29:21 LOG5 finish_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2011-Dec-19 03:29:21 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-19 03:29:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 03:29:21 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-19 03:29:21 LOG5 end_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2011-Dec-19 03:29:21 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-19 03:29:21 LOG5 begin_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2011-Dec-19 03:29:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-19 03:29:21 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-19 03:29:21 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-19 03:29:21 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-19 03:29:21 LOG5 begin_task: Level: (5) ID = <10255> Status = 0 0 0 0 ok 2011-Dec-19 03:29:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:29:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.098 1.106 0.914 0.956 2011-Dec-19 03:29:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.964 1.036 1.095 0.902 2011-Dec-19 03:29:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.861 1.109 0.929 1.098 2011-Dec-19 03:29:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.074 0.014 0.934 0.014 2011-Dec-19 03:29:27 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.5 27.7 B 30.8 30.8 mn:A 0.1 0.0 B -0.3 -0.3 gn: 11 11 2011-Dec-19 03:29:27 INFO3 from_mock: From MOCK: b0s1g0 rms:A 28.6 27.4 B 28.6 30.2 mn:A 0.1 -0.4 B -0.6 0.1 gn: 11 11 2011-Dec-19 03:29:27 INFO3 from_mock: From MOCK: b1s0g0 rms:A 31.0 29.0 B 33.7 29.5 mn:A 0.4 0.7 B 0.1 -0.1 gn: 7 11 2011-Dec-19 03:29:27 INFO3 from_mock: From MOCK: b1s1g0 rms:A 31.2 28.8 B 28.9 28.9 mn:A -0.4 -0.3 B 0.5 0.2 gn: 8 9 2011-Dec-19 03:29:27 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.6 28.7 B 28.9 30.3 mn:A 0.1 -0.2 B 0.4 0.1 gn: 10 11 2011-Dec-19 03:29:27 INFO3 from_mock: From MOCK: b2s1g0 rms:A 30.8 31.1 B 29.8 27.6 mn:A 0.2 -0.3 B -0.0 0.1 gn: 11 11 2011-Dec-19 03:29:27 INFO3 from_mock: From MOCK: b3s0g0 rms:A 29.7 29.5 B 31.5 28.1 mn:A 0.3 -0.2 B 0.1 -0.2 gn: 12 12 2011-Dec-19 03:29:27 INFO3 from_mock: From MOCK: b3s1g0 rms:A 31.1 30.4 B 30.0 31.2 mn:A -0.2 0.3 B 0.1 0.1 gn: 12 12 2011-Dec-19 03:29:27 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.9 30.0 B 31.7 31.9 mn:A -0.2 -0.3 B -0.3 -0.0 gn: 13 12 2011-Dec-19 03:29:27 INFO3 from_mock: From MOCK: b4s1g0 rms:A 33.2 30.1 B 30.7 29.6 mn:A -0.1 0.0 B -0.5 0.2 gn: 16 13 2011-Dec-19 03:29:27 INFO3 from_mock: From MOCK: b5s0g0 rms:A 28.9 27.8 B 30.5 30.5 mn:A 0.5 0.4 B 0.0 0.4 gn: 12 11 2011-Dec-19 03:29:27 INFO3 from_mock: From MOCK: b5s1g0 rms:A 29.5 29.3 B 30.9 30.7 mn:A -0.4 0.3 B -0.0 0.2 gn: 12 11 2011-Dec-19 03:29:27 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.3 29.6 B 15.4 15.9 mn:A -0.5 0.2 B 0.4 -0.4 gn: 13 31 2011-Dec-19 03:29:27 INFO3 from_mock: From MOCK: b6s1g0 rms:A 33.3 30.3 B 12.4 12.0 mn:A 0.7 0.5 B -0.0 0.2 gn: 14 31 2011-Dec-19 03:29:27 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-19 03:29:27 LOG5 end_task: Level: (5) ID = <10255> Status = 0 0 0 0 ok 2011-Dec-19 03:29:27 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-19 03:29:27 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-19 03:29:27 LOG5 finish_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2011-Dec-19 03:29:27 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-19 03:29:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 03:29:27 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-19 03:29:27 LOG5 end_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2011-Dec-19 03:29:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-19 03:29:27 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-19 03:29:27 LOG5 finish_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2011-Dec-19 03:29:27 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-19 03:29:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 03:29:27 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-19 03:29:27 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2011-Dec-19 03:29:27 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Edwin 2011-Dec-19 03:29:27 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Edwin 2011-Dec-19 03:29:27 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Edwin 2011-Dec-19 03:29:27 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Edwin 2011-Dec-19 03:29:27 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-19 03:29:27 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-19 03:29:27 LOG5 begin_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2011-Dec-19 03:29:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-19 03:29:27 START begin_task: Starting task 'selecting calibration type' 2011-Dec-19 03:29:27 LOG5 begin_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2011-Dec-19 03:29:27 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-19 03:29:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-19 03:29:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 03:29:27 START begin_task: Starting task 'waiting on setcal' 2011-Dec-19 03:29:27 LOG5 begin_task: Level: (5) ID = <10258> Status = 0 0 0 0 ok 2011-Dec-19 03:29:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Edwin' 2011-Dec-19 03:29:27 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-19 03:29:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 03:29:27 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:29:27 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-19 03:29:27 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-19 03:29:27 LOG5 end_task: Level: (5) ID = <10258> Status = 0 0 0 0 ok 2011-Dec-19 03:29:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-19 03:29:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-19 03:29:27 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-19 03:29:27 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-19 03:29:27 LOG5 begin_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2011-Dec-19 03:29:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:29:28 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-19 03:29:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-19 03:29:28 LOG5 end_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2011-Dec-19 03:29:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-19 03:29:28 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-19 03:29:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-19 03:29:28 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-19 03:29:28 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-19 03:29:28 LOG5 begin_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2011-Dec-19 03:29:28 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-19 03:29:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-19 03:29:28 LOG5 end_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2011-Dec-19 03:29:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-19 03:29:28 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-19 03:29:28 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-19 03:29:28 LOG5 end_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2011-Dec-19 03:29:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-19 03:29:28 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-19 03:29:28 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-19 03:29:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-19 03:29:28 LOG5 begin_task: Level: (4) ID = <10261> Status = 0 0 0 0 ok 2011-Dec-19 03:29:28 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-19 03:29:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-19 03:29:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-19 03:29:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-19 03:29:28 LOG5 end_task: Level: (4) ID = <10261> Status = 0 0 0 0 ok 2011-Dec-19 03:29:28 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-19 03:29:28 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-19 03:29:28 LOG5 begin_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2011-Dec-19 03:29:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-19 03:29:28 LOG5 log_alfabeam: Parameters: 8.3037777777777801 22.885638888888884 8.877498 2011.9668595520573 76.999992 2011-Dec-19 03:29:28 LOG4 log_alfabeam: ALFABEAM 0 8.303777777777793 22.885638888888888 2011-Dec-19 03:29:28 LOG4 log_alfabeam: ALFABEAM 1 8.306178803484814 22.792774154102492 2011-Dec-19 03:29:28 LOG4 log_alfabeam: ALFABEAM 2 8.311106169965637 22.854626542285338 2011-Dec-19 03:29:28 LOG4 log_alfabeam: ALFABEAM 3 8.308763895077336 22.947620021446948 2011-Dec-19 03:29:28 LOG4 log_alfabeam: ALFABEAM 4 8.301440847340027 22.979203603262352 2011-Dec-19 03:29:28 LOG4 log_alfabeam: ALFABEAM 5 8.296433112426257 22.916141761642972 2011-Dec-19 03:29:28 LOG4 log_alfabeam: ALFABEAM 6 8.298829251298409 22.822704745477498 2011-Dec-19 03:29:28 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-19 03:29:28 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-19 03:29:28 LOG3 take_mock_data: PSET configuration: obsnm=Edwin 2011-Dec-19 03:29:28 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_040 2011-Dec-19 03:29:28 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-19 03:29:28 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-19 03:29:28 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-19 03:29:28 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-19 03:29:28 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-19 03:29:28 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-19 03:29:28 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-19 03:29:28 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-19 03:29:28 LOG3 take_mock_data: PSET configuration: patternid=135300021 2011-Dec-19 03:29:28 LOG3 take_mock_data: PSET configuration: scanid=135300022 2011-Dec-19 03:29:28 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-19 03:29:28 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-19 03:29:28 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-19 03:29:28 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456321915.0 2011-Dec-19 03:29:28 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306321915.0 2011-Dec-19 03:29:28 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-19 03:29:28 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-19 03:29:28 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Edwin:object=AGES3193_p3_040:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=135300021:scanid=135300022:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456321915.0:topobfreqhz=1306321915.0:filetype=1 2011-Dec-19 03:29:28 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-19 03:29:28 LOG5 begin_task: Level: (5) ID = <10263> Status = 0 0 0 0 ok 2011-Dec-19 03:29:28 LOG4 from_mock: From MOCK: psetok 2011-Dec-19 03:29:28 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-19 03:29:28 LOG5 end_task: Level: (5) ID = <10263> Status = 0 0 0 0 ok 2011-Dec-19 03:29:28 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-19 03:29:28 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-19 03:29:28 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-19 03:29:28 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-19 03:29:28 LOG5 begin_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2011-Dec-19 03:29:28 NOTE WAPPDATA-new_file: New FITS file: wapp.20111219.a2048.0005.fits 2011-Dec-19 03:29:28 LOG4 from_mock: From MOCK: starok 2011-Dec-19 03:29:28 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-19 03:29:28 LOG5 end_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2011-Dec-19 03:29:28 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-19 03:29:28 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135300022 2011-Dec-19 03:29:29 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-19 03:29:29 LOG5 begin_task: Level: (5) ID = <10265> Status = 0 0 0 0 ok 2011-Dec-19 03:29:29 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111219.a2048.0005.fits} 2011-Dec-19 03:29:29 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-19 03:29:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-19 03:29:29 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-19 03:29:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-19 03:29:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26970.00 2011-Dec-19 03:29:30 INFO2 got_mock_message: Mock spectrometer start file number is 01200 2011-Dec-19 03:29:30 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-19 03:29:30 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-19 03:29:30 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-19 03:29:30 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-19 03:29:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-19 03:29:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-19 03:29:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-19 03:29:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-19 03:29:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-19 03:29:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-19 03:29:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-19 03:29:30 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-19 03:29:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:29:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:29:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:29:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:29:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:29:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:29:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:29:33 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:29:33.02 2011-Dec-19 03:29:33 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324279773.02 Mon Dec 19 03:29:33 2011 2011-Dec-19 03:29:33 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-19 03:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.321915 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-19 03:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.321915 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.321915 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.321915 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.321915 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.538 (still bad) 2011-Dec-19 03:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.321915 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 03:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.321915 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 03:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.321915 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-19 03:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.321915 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-19 03:29:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-19 03:29:39 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-19 03:29:39 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-19 03:29:39 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-19 03:29:39 LOG5 end_task: Level: (5) ID = <10265> Status = 0 0 0 0 ok 2011-Dec-19 03:29:39 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-19 03:29:39 LOG5 end_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2011-Dec-19 03:29:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-19 03:29:39 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-19 03:29:39 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-19 03:29:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-19 03:29:39 LOG5 begin_task: Level: (4) ID = <10266> Status = 0 0 0 0 ok 2011-Dec-19 03:29:39 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-19 03:29:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-19 03:29:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-19 03:29:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-19 03:29:39 LOG5 end_task: Level: (4) ID = <10266> Status = 0 0 0 0 ok 2011-Dec-19 03:29:39 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-19 03:29:39 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-19 03:29:39 LOG5 begin_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2011-Dec-19 03:29:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-19 03:29:39 LOG5 log_alfabeam: Parameters: 8.3037777777777801 22.885638888888884 8.880562 2011.9668599006261 76.999992 2011-Dec-19 03:29:39 LOG4 log_alfabeam: ALFABEAM 0 8.303777777777785 22.885638888888895 2011-Dec-19 03:29:39 LOG4 log_alfabeam: ALFABEAM 1 8.306195332323462 22.792855337057869 2011-Dec-19 03:29:39 LOG4 log_alfabeam: ALFABEAM 2 8.311111752282448 22.854879009631524 2011-Dec-19 03:29:39 LOG4 log_alfabeam: ALFABEAM 3 8.308752672819692 22.947792841830267 2011-Dec-19 03:29:39 LOG4 log_alfabeam: ALFABEAM 4 8.301423890631829 22.979121655444441 2011-Dec-19 03:29:39 LOG4 log_alfabeam: ALFABEAM 5 8.296427686509762 22.915890548398828 2011-Dec-19 03:29:39 LOG4 log_alfabeam: ALFABEAM 6 8.298840502156521 22.822537042695135 2011-Dec-19 03:29:39 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-19 03:29:39 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-19 03:29:39 LOG3 take_mock_data: PSET configuration: obsnm=Edwin 2011-Dec-19 03:29:39 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_040 2011-Dec-19 03:29:39 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-19 03:29:39 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-19 03:29:39 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-19 03:29:39 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-19 03:29:39 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-19 03:29:39 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-19 03:29:39 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-19 03:29:39 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-19 03:29:39 LOG3 take_mock_data: PSET configuration: patternid=135300021 2011-Dec-19 03:29:39 LOG3 take_mock_data: PSET configuration: scanid=135300023 2011-Dec-19 03:29:39 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-19 03:29:39 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-19 03:29:39 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-19 03:29:39 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456321915.0 2011-Dec-19 03:29:39 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306321915.0 2011-Dec-19 03:29:39 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-19 03:29:39 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-19 03:29:39 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Edwin:object=AGES3193_p3_040:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=135300021:scanid=135300023:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456321915.0:topobfreqhz=1306321915.0:filetype=1 2011-Dec-19 03:29:39 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-19 03:29:39 LOG5 begin_task: Level: (5) ID = <10268> Status = 0 0 0 0 ok 2011-Dec-19 03:29:39 LOG4 from_mock: From MOCK: psetok 2011-Dec-19 03:29:39 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-19 03:29:39 LOG5 end_task: Level: (5) ID = <10268> Status = 0 0 0 0 ok 2011-Dec-19 03:29:39 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-19 03:29:39 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-19 03:29:39 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-19 03:29:39 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-19 03:29:39 LOG5 begin_task: Level: (5) ID = <10269> Status = 0 0 0 0 ok 2011-Dec-19 03:29:39 LOG4 from_mock: From MOCK: starok 2011-Dec-19 03:29:39 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-19 03:29:39 LOG5 end_task: Level: (5) ID = <10269> Status = 0 0 0 0 ok 2011-Dec-19 03:29:39 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-19 03:29:39 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135300023 2011-Dec-19 03:29:39 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-19 03:29:39 LOG5 begin_task: Level: (5) ID = <10270> Status = 0 0 0 0 ok 2011-Dec-19 03:29:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-19 03:29:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-19 03:29:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26980.00 2011-Dec-19 03:29:40 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-19 03:29:40 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-19 03:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.577 (still bad) 2011-Dec-19 03:29:42 INFO2 got_mock_message: Mock spectrometer start file number is 01300 2011-Dec-19 03:29:42 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-19 03:29:42 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-19 03:29:42 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-19 03:29:42 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-19 03:29:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-19 03:29:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-19 03:29:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-19 03:29:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-19 03:29:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-19 03:29:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-19 03:29:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-19 03:29:42 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-19 03:29:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:29:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:29:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:29:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:29:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:29:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:29:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:29:45 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:29:45.02 2011-Dec-19 03:29:45 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324279785.02 Mon Dec 19 03:29:45 2011 2011-Dec-19 03:29:45 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-19 03:29:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.321915 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-19 03:29:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.321915 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:29:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.321915 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:29:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.321915 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:29:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.321915 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:29:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.321915 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 03:29:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.321915 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 03:29:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.321915 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-19 03:29:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.321915 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-19 03:29:45 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-19 03:29:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-19 03:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:29:51 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-19 03:29:51 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-19 03:29:51 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-19 03:29:51 LOG5 end_task: Level: (5) ID = <10270> Status = 0 0 0 0 ok 2011-Dec-19 03:29:51 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-19 03:29:51 LOG5 end_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2011-Dec-19 03:29:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-19 03:29:51 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-19 03:29:51 LOG5 finish_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2011-Dec-19 03:29:51 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-19 03:29:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 03:29:51 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-19 03:29:51 LOG5 end_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2011-Dec-19 03:29:51 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-19 03:29:51 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 121.25 and ZA = 9.03 2011-Dec-19 03:29:51 LOG3 track_source: Calling 'track_source AGES3193_p3_040 121.25 9.0329300349 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-19 03:29:51 START begin_task: Starting task 'sending tracking commands' 2011-Dec-19 03:29:51 LOG5 begin_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2011-Dec-19 03:29:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_040} INFO {Slewing to source 'AGES3193_p3_040' ...} 2011-Dec-19 03:29:51 INFO1 track_source: Starting to track AGES3193_p3_040 2011-Dec-19 03:29:51 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_040" 2011-Dec-19 03:29:51 LOG3 vw_send: To DATATAKING: set ra 121.25 2011-Dec-19 03:29:51 LOG3 vw_send: To DATATAKING: set dec 9.0329300349 2011-Dec-19 03:29:51 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-19 03:29:51 LOG3 vw_send: To DATATAKING: pnt tr 121.25 9.0329300349 -CF 2011-Dec-19 03:29:51 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 03:29:51 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-19 03:29:51 LOG5 finish_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2011-Dec-19 03:29:51 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-19 03:29:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 03:29:51 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-19 03:29:51 LOG5 end_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2011-Dec-19 03:29:51 LOG1 fixed_driftmap: Parameters: HA = +00:33:30.0 Start = 10:27:12.1 LST = 08:53:02.1 diff = 5650.0 secs 2011-Dec-19 03:29:51 WARNING fixed_driftmap: WARNING RA is more than 1 hour away --- starting anyway! 2011-Dec-19 03:29:51 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-19 03:29:51 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-19 03:29:51 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-19 03:29:51 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-19 03:29:51 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-19 03:29:51 LOG5 begin_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2011-Dec-19 03:29:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-19 03:29:51 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-19 03:29:51 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-19 03:29:51 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-19 03:29:51 LOG3 take_mock_data: PSET configuration: obsnm=Edwin 2011-Dec-19 03:29:51 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_040 2011-Dec-19 03:29:51 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-19 03:29:51 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-19 03:29:51 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-19 03:29:51 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-19 03:29:51 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-19 03:29:51 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-19 03:29:51 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-19 03:29:51 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-19 03:29:51 LOG3 take_mock_data: PSET configuration: patternid=135300024 2011-Dec-19 03:29:51 LOG3 take_mock_data: PSET configuration: scanid=135300024 2011-Dec-19 03:29:51 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-19 03:29:51 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-19 03:29:51 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-19 03:29:51 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456321915.0 2011-Dec-19 03:29:51 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306321915.0 2011-Dec-19 03:29:51 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-19 03:29:51 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-19 03:29:51 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Edwin:object=AGES3193_p3_040:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=135300024:scanid=135300024:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456321915.0:topobfreqhz=1306321915.0:filetype=1 2011-Dec-19 03:29:51 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-19 03:29:51 LOG5 begin_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2011-Dec-19 03:29:51 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_040" 2011-Dec-19 03:29:51 LOG4 got_cormsg: From DATATAKING: set ra 121.25 2011-Dec-19 03:29:51 LOG4 from_mock: From MOCK: psetok 2011-Dec-19 03:29:51 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-19 03:29:51 LOG5 end_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2011-Dec-19 03:29:51 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-19 03:29:51 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-19 03:29:51 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-19 03:29:51 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-19 03:29:51 LOG5 begin_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2011-Dec-19 03:29:51 LOG4 got_cormsg: From DATATAKING: set dec 9.0329300349 2011-Dec-19 03:29:51 LOG4 got_cormsg: From DATATAKING: vw% 121.25 2011-Dec-19 03:29:51 LOG4 from_mock: From MOCK: starok 2011-Dec-19 03:29:51 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-19 03:29:51 LOG5 end_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2011-Dec-19 03:29:51 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-19 03:29:51 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 135300024 2011-Dec-19 03:29:52 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-19 03:29:52 LOG5 begin_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2011-Dec-19 03:29:52 LOG4 got_cormsg: From DATATAKING: vw% 9.0329300349 2011-Dec-19 03:29:52 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-19 03:29:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-19 03:29:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:29:52 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-19 03:29:52 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-19 03:29:52 LOG4 got_cormsg: From DATATAKING: pnt tr 121.25 9.0329300349 -CF 2011-Dec-19 03:29:52 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 03:29:52 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-19 03:29:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:29:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-19 03:29:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26993.00 2011-Dec-19 03:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:29:54 INFO2 got_mock_message: Mock spectrometer start file number is 01400 2011-Dec-19 03:29:54 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-19 03:29:54 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2011-Dec-19 03:29:54 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-19 03:29:54 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-19 03:29:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-19 03:29:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-19 03:29:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-19 03:29:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-19 03:29:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-19 03:29:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-19 03:29:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-19 03:29:54 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-19 03:29:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 03:29:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 03:29:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 03:29:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 03:29:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 03:29:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 03:29:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 03:29:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.321915 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-19 03:29:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.321915 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:29:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.321915 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:29:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.321915 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:29:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.321915 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:29:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.321915 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 03:29:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.321915 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 03:29:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.321915 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-19 03:29:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.321915 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-19 03:29:55 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2011-Dec-19 03:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-19 03:29:57 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:29:57.02 2011-Dec-19 03:29:57 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324279797.02 Mon Dec 19 03:29:57 2011 2011-Dec-19 03:29:57 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-19 03:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-19 03:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-19 03:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 03:30:03 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2011-Dec-19 03:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 03:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 03:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 03:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 03:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 03:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-19 03:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-19 03:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-19 03:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-19 03:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 03:30:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:30:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.104 1.102 0.918 0.957 2011-Dec-19 03:30:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.961 1.028 1.104 0.906 2011-Dec-19 03:30:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.862 1.114 0.933 1.100 2011-Dec-19 03:30:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.086 0.014 0.947 0.014 2011-Dec-19 03:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-19 03:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-19 03:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-19 03:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 03:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-19 03:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-19 03:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 03:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 03:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 03:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 03:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 03:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 03:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 03:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 03:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:31:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:31:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 1.102 0.918 0.955 2011-Dec-19 03:31:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.961 1.028 1.098 0.901 2011-Dec-19 03:31:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.863 1.111 0.934 1.102 2011-Dec-19 03:31:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.070 0.014 0.931 0.014 2011-Dec-19 03:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 03:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 03:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 03:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:32:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:32:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.105 1.101 0.916 0.957 2011-Dec-19 03:32:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.959 1.026 1.098 0.900 2011-Dec-19 03:32:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.861 1.111 0.928 1.097 2011-Dec-19 03:32:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.069 0.014 0.930 0.014 2011-Dec-19 03:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 03:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 03:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:33:27 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 8-15 errors 2011-Dec-19 03:33:27 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 8-15 errors 2011-Dec-19 03:33:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:33:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.105 1.101 0.918 0.957 2011-Dec-19 03:33:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.959 1.028 1.098 0.902 2011-Dec-19 03:33:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.861 1.111 0.927 1.096 2011-Dec-19 03:33:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.014 0.931 0.014 2011-Dec-19 03:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-19 03:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-19 03:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-19 03:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-19 03:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 03:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 03:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-19 03:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 03:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-19 03:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-19 03:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-19 03:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-19 03:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 03:34:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:34:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.105 1.100 0.935 0.972 2011-Dec-19 03:34:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.958 1.028 1.098 0.901 2011-Dec-19 03:34:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.863 1.113 0.930 1.097 2011-Dec-19 03:34:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.073 0.014 0.934 0.014 2011-Dec-19 03:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 03:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-19 03:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-19 03:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 03:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:35:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:35:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.104 1.100 0.916 0.956 2011-Dec-19 03:35:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.957 1.027 1.097 0.901 2011-Dec-19 03:35:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.862 1.112 0.932 1.097 2011-Dec-19 03:35:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.071 0.014 0.933 0.014 2011-Dec-19 03:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:35:51 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 16-31 errors 2011-Dec-19 03:35:51 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 2-3 errors 2011-Dec-19 03:35:51 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 8-15 errors 2011-Dec-19 03:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:36:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:36:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.105 1.099 0.915 0.955 2011-Dec-19 03:36:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.959 1.029 1.096 0.900 2011-Dec-19 03:36:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.861 1.111 0.932 1.097 2011-Dec-19 03:36:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.070 0.014 0.931 0.014 2011-Dec-19 03:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:37:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:37:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.105 1.100 0.915 0.954 2011-Dec-19 03:37:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.956 1.027 1.094 0.898 2011-Dec-19 03:37:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.858 1.108 0.928 1.096 2011-Dec-19 03:37:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.069 0.014 0.929 0.014 2011-Dec-19 03:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:38:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:38:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.099 1.099 0.913 0.954 2011-Dec-19 03:38:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 1.030 1.093 0.899 2011-Dec-19 03:38:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.858 1.109 0.927 1.095 2011-Dec-19 03:38:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.014 0.928 0.014 2011-Dec-19 03:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:39:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:39:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 1.099 0.914 0.957 2011-Dec-19 03:39:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 1.026 1.094 0.900 2011-Dec-19 03:39:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.857 1.112 0.926 1.093 2011-Dec-19 03:39:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 0.014 0.942 0.014 2011-Dec-19 03:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-19 03:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 03:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 03:39:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-19 03:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-19 03:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-19 03:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-19 03:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-19 03:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 03:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 03:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:40:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:40:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 1.101 0.943 0.987 2011-Dec-19 03:40:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 1.027 1.094 0.899 2011-Dec-19 03:40:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.858 1.111 0.928 1.095 2011-Dec-19 03:40:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.014 0.930 0.014 2011-Dec-19 03:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:41:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:41:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 1.099 0.911 0.953 2011-Dec-19 03:41:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 1.023 1.092 0.899 2011-Dec-19 03:41:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.857 1.110 0.926 1.094 2011-Dec-19 03:41:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.067 0.014 0.930 0.014 2011-Dec-19 03:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:42:35 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 03:42:35.300 (seconds: 13355.300)!} 2011-Dec-19 03:42:35 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 03:42:35.300 (seconds: 13355.300)! 2011-Dec-19 03:42:36 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 13354.0 to 13355.0! 2011-Dec-19 03:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:42:37 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (13354.0 - 13356.0)! 2011-Dec-19 03:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:42:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:42:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.104 1.104 0.913 0.953 2011-Dec-19 03:42:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 1.027 1.095 0.901 2011-Dec-19 03:42:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.856 1.112 0.927 1.094 2011-Dec-19 03:42:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.014 0.927 0.014 2011-Dec-19 03:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:43:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:43:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.098 0.910 0.953 2011-Dec-19 03:43:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 1.026 1.091 0.899 2011-Dec-19 03:43:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.857 1.110 0.926 1.092 2011-Dec-19 03:43:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.063 0.014 0.926 0.014 2011-Dec-19 03:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:44:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:44:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 1.100 0.911 0.954 2011-Dec-19 03:44:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.958 1.025 1.101 0.906 2011-Dec-19 03:44:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.857 1.110 0.927 1.093 2011-Dec-19 03:44:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.014 0.928 0.014 2011-Dec-19 03:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 03:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 03:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 03:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-19 03:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 03:45:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:45:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 1.100 0.914 0.955 2011-Dec-19 03:45:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 1.020 1.094 0.898 2011-Dec-19 03:45:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.859 1.113 0.944 1.115 2011-Dec-19 03:45:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.014 0.927 0.014 2011-Dec-19 03:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-19 03:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-19 03:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:46:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:46:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 1.100 0.913 0.951 2011-Dec-19 03:46:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 1.024 1.093 0.896 2011-Dec-19 03:46:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.856 1.108 0.927 1.093 2011-Dec-19 03:46:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.014 0.926 0.014 2011-Dec-19 03:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-19 03:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-19 03:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-19 03:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 03:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 03:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-19 03:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-19 03:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-19 03:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-19 03:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-19 03:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-19 03:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:47:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:47:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.105 1.101 0.914 0.952 2011-Dec-19 03:47:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 1.023 1.094 0.898 2011-Dec-19 03:47:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.869 1.141 0.929 1.094 2011-Dec-19 03:47:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.014 0.927 0.014 2011-Dec-19 03:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-19 03:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-19 03:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 03:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-19 03:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-19 03:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-19 03:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-19 03:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-19 03:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-19 03:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-19 03:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-19 03:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-19 03:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:48:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:48:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.105 1.097 0.914 0.953 2011-Dec-19 03:48:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 1.021 1.093 0.896 2011-Dec-19 03:48:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.856 1.109 0.932 1.095 2011-Dec-19 03:48:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.014 0.928 0.014 2011-Dec-19 03:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-19 03:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:49:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:49:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 1.097 0.913 0.953 2011-Dec-19 03:49:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 1.022 1.094 0.897 2011-Dec-19 03:49:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.858 1.113 0.928 1.094 2011-Dec-19 03:49:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.014 0.928 0.014 2011-Dec-19 03:49:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-19 03:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:49:58 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-19 03:49:58 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-19 03:49:58 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-19 03:49:58 LOG5 end_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2011-Dec-19 03:49:58 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-19 03:49:58 LOG5 end_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2011-Dec-19 03:49:58 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-19 03:49:58 LOG5 finish_task: Level: (2) ID = <10235> Status = 0 0 0 0 ok 2011-Dec-19 03:49:58 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-19 03:49:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-19 03:49:58 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-19 03:49:58 LOG5 end_task: Level: (2) ID = <10235> Status = 0 0 0 0 ok 2011-Dec-19 03:49:58 COMMAND run_command_line: EXECUTING command 41: 'ENDIF' 2011-Dec-19 03:49:58 COMMAND run_command_line: EXECUTING command 44: 'IF LSTSLEW(AGES3193_p3_042) < 105041 THEN' 2011-Dec-19 03:49:58 LOG3 is_if_valid: Current source data: up 243.1 10.5 UP - - 122 5.1 2011-Dec-19 03:49:58 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_042) < 105041 2011-Dec-19 03:49:58 INFO5 is_if_valid: Condition parsed as: 9.3051000000000013 < 10.844722222222222 2011-Dec-19 03:49:58 COMMAND run_command_line: EXECUTING command 45: 'FIXEDDRIFT az=110.85 alfaangle=-89.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_042 ra=95300.00 dec=225130.00' 2011-Dec-19 03:49:58 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-19 03:49:59 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-19 03:49:59 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 110.85 -89.1 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_042 95300.00 225130.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-19 03:49:59 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-19 03:49:59 LOG5 begin_task: Level: (2) ID = <10276> Status = 0 0 0 0 ok 2011-Dec-19 03:49:59 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_040' 2011-Dec-19 03:49:59 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-19 03:49:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_042} 2011-Dec-19 03:49:59 INFO3 fixed_driftmap: Sending telescope to Az = 110.85 and ZA = 14.05 2011-Dec-19 03:49:59 LOG3 track_source: Calling 'track_source AGES3193_p3_042 110.85 14.0510265475 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-19 03:49:59 START begin_task: Starting task 'sending tracking commands' 2011-Dec-19 03:49:59 LOG5 begin_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2011-Dec-19 03:49:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_042} INFO {Slewing to source 'AGES3193_p3_042' ...} 2011-Dec-19 03:49:59 INFO1 track_source: Starting to track AGES3193_p3_042 2011-Dec-19 03:49:59 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_042" 2011-Dec-19 03:49:59 LOG3 vw_send: To DATATAKING: set ra 110.85 2011-Dec-19 03:49:59 LOG3 vw_send: To DATATAKING: set dec 14.0510265475 2011-Dec-19 03:49:59 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-19 03:49:59 LOG3 vw_send: To DATATAKING: pnt tr 110.85 14.0510265475 -CF 2011-Dec-19 03:49:59 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 03:49:59 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-19 03:49:59 LOG5 finish_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2011-Dec-19 03:49:59 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-19 03:49:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 03:49:59 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-19 03:49:59 LOG5 end_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2011-Dec-19 03:49:59 START begin_task: Starting task 'rotate ALFA to -89.1 degrees' 2011-Dec-19 03:49:59 LOG5 begin_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2011-Dec-19 03:49:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -89.1 degrees ...} 2011-Dec-19 03:49:59 INFO2 rotate_alfa: ALFA commanded to -89.1 degrees 2011-Dec-19 03:49:59 LOG3 sock_errsend: To ALFAMOTOR: POSITION -89.1 REPLY 2011-Dec-19 03:49:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-19 03:49:59 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-19 03:49:59 LOG5 begin_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2011-Dec-19 03:49:59 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_042" 2011-Dec-19 03:49:59 LOG4 got_cormsg: From DATATAKING: set ra 110.85 2011-Dec-19 03:49:59 LOG4 got_cormsg: From DATATAKING: set dec 14.0510265475 2011-Dec-19 03:49:59 LOG4 got_cormsg: From DATATAKING: vw% 110.85 2011-Dec-19 03:49:59 LOG4 got_cormsg: From DATATAKING: vw% 14.0510265475 2011-Dec-19 03:49:59 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:49:59 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-19 03:49:59 LOG4 got_cormsg: From DATATAKING: pnt tr 110.85 14.0510265475 -CF 2011-Dec-19 03:49:59 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 03:49:59 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-19 03:49:59 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:51:31 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-19 03:51:31 INFO3 alfa_motor: ALFA rotator in-position -89.10 degrees 2011-Dec-19 03:51:31 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-19 03:51:31 LOG5 end_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2011-Dec-19 03:51:31 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-19 03:51:31 STOP finish_task: Finishing task 'rotate ALFA to -89.1 degrees' 2011-Dec-19 03:51:31 LOG5 finish_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2011-Dec-19 03:51:31 INFO2 finish_task: DONE finished configuration: rotating ALFA to -89.1 degrees 2011-Dec-19 03:51:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 03:51:31 STOP end_task: Finishing task 'rotate ALFA to -89.1 degrees' with status 'OK' 2011-Dec-19 03:51:31 LOG5 end_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2011-Dec-19 03:51:31 START begin_task: Starting task 'waiting on telescope' 2011-Dec-19 03:51:31 LOG5 begin_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2011-Dec-19 03:51:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-19 03:51:31 LOG3 waittrk: Start waittrk 5 2011-Dec-19 03:51:31 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-19 03:51:31 LOG5 begin_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2011-Dec-19 03:51:36 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-19 03:51:36 LOG5 end_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2011-Dec-19 03:51:36 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-19 03:51:36 LOG5 begin_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2011-Dec-19 03:52:10 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-19 03:52:10 LOG5 end_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2011-Dec-19 03:52:10 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-19 03:52:10 INFO2 waittrk: Now tracking AGES3193_p3_042 2011-Dec-19 03:52:10 LOG4 waittrk: Current telescope position: Az = 110.58 ZA = 14.06 2011-Dec-19 03:52:10 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-19 03:52:10 LOG5 finish_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2011-Dec-19 03:52:10 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-19 03:52:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 03:52:10 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-19 03:52:10 LOG5 end_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2011-Dec-19 03:52:10 START begin_task: Starting task 'selecting calibration type' 2011-Dec-19 03:52:10 LOG5 begin_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2011-Dec-19 03:52:10 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-19 03:52:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-19 03:52:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 03:52:10 START begin_task: Starting task 'waiting on setcal' 2011-Dec-19 03:52:10 LOG5 begin_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2011-Dec-19 03:52:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-19 03:52:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 03:52:11 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:52:11 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-19 03:52:11 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-19 03:52:11 LOG5 end_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2011-Dec-19 03:52:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-19 03:52:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-19 03:52:11 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-19 03:52:11 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-19 03:52:11 LOG5 begin_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2011-Dec-19 03:52:11 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:52:11 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-19 03:52:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-19 03:52:11 LOG5 end_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2011-Dec-19 03:52:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-19 03:52:11 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-19 03:52:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-19 03:52:11 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-19 03:52:11 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-19 03:52:11 LOG5 begin_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2011-Dec-19 03:52:11 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-19 03:52:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-19 03:52:11 LOG5 end_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2011-Dec-19 03:52:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-19 03:52:11 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-19 03:52:11 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-19 03:52:11 LOG5 end_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2011-Dec-19 03:52:11 LOG5 dopset_later: Calling 'dopset_later 0' 2011-Dec-19 03:52:11 INFO3 dopset_later: Setting Doppler correction now 2011-Dec-19 03:52:12 LOG5 antvel: Calling 'antvel 110.850000 14.051027 F Heliocentric 0' 2011-Dec-19 03:52:12 LOG2 antvel: Transforming current Az = 110.85 ZA = 14.05 to apparent RA = 08:18:27.3 Dec = +22:47:52.0 2011-Dec-19 03:52:12 LOG2 antvel: Parameters to Doppler: Heliocentric 28331 2011 353 0.0 2011-Dec-19 03:52:12 INFO5 antvel: Computed antenna velocity: -16.95054 km/s 2011-Dec-19 03:52:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-16.950537273799998 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-19 03:52:12 INFO4 dopset_gen: New sky frequencies: 1381.321530 1381.321530 1381.321530 1381.321530 1381.321530 1381.321530 1381.321530 1381.321530 1381.321530 2011-Dec-19 03:52:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.321530 sky0=1381.321530 sky1=1381.321530 sky2=1381.321530 sky3=1381.321530 sky4=1381.321530 sky5=1381.321530 sky6=1381.321530 sky7=1381.321530 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-19 03:52:12 LOG2 dopset_gen: Result from 'sky2syn': 1631.321530 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-19 03:52:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631321530.0} 2011-Dec-19 03:52:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 03:52:12 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-19 03:52:12 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-19 03:52:12 INFO5 fixed_driftmap: Tracking J2000 position: RA = 08:17:47.9 Dec = +22:50:08.0 2011-Dec-19 03:52:12 LOG3 track_source: Calling 'track_source AGES3193_p3_042 081747.9 225008.0 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-19 03:52:12 START begin_task: Starting task 'sending tracking commands' 2011-Dec-19 03:52:12 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2011-Dec-19 03:52:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_042} INFO {Slewing to source 'AGES3193_p3_042' ...} 2011-Dec-19 03:52:12 INFO1 track_source: Starting to track AGES3193_p3_042 2011-Dec-19 03:52:12 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_042" 2011-Dec-19 03:52:12 LOG3 vw_send: To DATATAKING: set ra 081747.9 2011-Dec-19 03:52:12 LOG3 vw_send: To DATATAKING: set dec 225008.0 2011-Dec-19 03:52:12 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-19 03:52:12 LOG3 vw_send: To DATATAKING: pnt tr 081747.9 225008.0 -CJ 2011-Dec-19 03:52:12 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 03:52:12 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-19 03:52:12 LOG5 finish_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2011-Dec-19 03:52:12 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-19 03:52:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 03:52:12 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-19 03:52:12 LOG5 end_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2011-Dec-19 03:52:12 START begin_task: Starting task 'waiting on telescope' 2011-Dec-19 03:52:12 LOG5 begin_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2011-Dec-19 03:52:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-19 03:52:12 LOG3 waittrk: Start waittrk 5 2011-Dec-19 03:52:12 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-19 03:52:12 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2011-Dec-19 03:52:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631321530.0} 2011-Dec-19 03:52:12 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:52:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 03:52:12 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:52:12 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_042" 2011-Dec-19 03:52:12 LOG4 got_cormsg: From DATATAKING: set ra 081747.9 2011-Dec-19 03:52:12 LOG4 got_cormsg: From DATATAKING: set dec 225008.0 2011-Dec-19 03:52:12 LOG4 got_cormsg: From DATATAKING: vw% 081747.9 2011-Dec-19 03:52:12 LOG4 got_cormsg: From DATATAKING: vw% 225008.0 2011-Dec-19 03:52:12 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:52:12 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-19 03:52:12 LOG4 got_cormsg: From DATATAKING: pnt tr 081747.9 225008.0 -CJ 2011-Dec-19 03:52:12 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 03:52:12 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-19 03:52:12 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:52:17 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-19 03:52:17 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2011-Dec-19 03:52:17 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-19 03:52:17 LOG5 begin_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2011-Dec-19 03:52:19 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-19 03:52:19 LOG5 end_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2011-Dec-19 03:52:19 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-19 03:52:19 INFO2 waittrk: Now tracking AGES3193_p3_042 2011-Dec-19 03:52:19 LOG4 waittrk: Current telescope position: Az = 110.55 ZA = 14.08 2011-Dec-19 03:52:19 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-19 03:52:19 LOG5 finish_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2011-Dec-19 03:52:19 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-19 03:52:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 03:52:19 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-19 03:52:19 LOG5 end_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2011-Dec-19 03:52:19 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-19 03:52:19 LOG5 begin_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2011-Dec-19 03:52:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-19 03:52:19 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-19 03:52:19 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-19 03:52:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-19 03:52:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 03:52:19 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-19 03:52:19 LOG5 begin_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2011-Dec-19 03:52:20 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-19 03:52:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 03:52:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:52:22 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-19 03:52:22 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-19 03:52:22 LOG5 end_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2011-Dec-19 03:52:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-19 03:52:22 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-19 03:52:22 LOG5 begin_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2011-Dec-19 03:52:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-19 03:52:22 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 03:52:22 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 03:52:22 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 03:52:23 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 03:52:23 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-19 03:52:23 LOG5 begin_task: Level: (5) ID = <10294> Status = 0 0 0 0 ok 2011-Dec-19 03:52:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-19 03:52:23 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:52:23 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 8 6 dB 2011-Dec-19 03:52:23 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 3 4 dB 2011-Dec-19 03:52:23 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 3 dB 2011-Dec-19 03:52:23 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2011-Dec-19 03:52:23 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-19 03:52:23 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-19 03:52:23 LOG5 end_task: Level: (5) ID = <10294> Status = 0 0 0 0 ok 2011-Dec-19 03:52:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.914 0.895 ALFA beam 1: 0.950 0.939 2011-Dec-19 03:52:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.972 1.050 ALFA beam 3: 1.096 0.940 2011-Dec-19 03:52:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.883 0.972 ALFA beam 5: 1.033 0.917 2011-Dec-19 03:52:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.924 0.014 ALFA beam 7: 1.008 0.014 2011-Dec-19 03:52:23 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-19 03:52:23 LOG5 finish_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2011-Dec-19 03:52:23 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-19 03:52:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 03:52:23 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-19 03:52:23 LOG5 end_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2011-Dec-19 03:52:23 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-19 03:52:23 LOG5 begin_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2011-Dec-19 03:52:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-19 03:52:23 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-19 03:52:23 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-19 03:52:23 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-19 03:52:23 LOG5 begin_task: Level: (5) ID = <10296> Status = 0 0 0 0 ok 2011-Dec-19 03:52:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:52:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.914 0.895 0.950 0.939 2011-Dec-19 03:52:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.972 1.050 1.096 0.940 2011-Dec-19 03:52:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.883 0.972 1.033 0.917 2011-Dec-19 03:52:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.014 1.008 0.014 2011-Dec-19 03:52:29 INFO3 from_mock: From MOCK: b0s0g0 rms:A 32.2 28.3 B 31.2 31.2 mn:A -0.1 -0.1 B -0.5 -0.4 gn: 11 11 2011-Dec-19 03:52:29 INFO3 from_mock: From MOCK: b0s1g0 rms:A 29.3 28.0 B 29.6 31.3 mn:A -0.1 -0.5 B -0.6 0.2 gn: 11 11 2011-Dec-19 03:52:29 INFO3 from_mock: From MOCK: b1s0g0 rms:A 31.2 29.3 B 33.2 29.1 mn:A 0.5 0.6 B 0.1 -0.1 gn: 7 11 2011-Dec-19 03:52:29 INFO3 from_mock: From MOCK: b1s1g0 rms:A 31.5 29.0 B 28.6 28.6 mn:A -0.5 -0.3 B 0.5 0.1 gn: 8 9 2011-Dec-19 03:52:29 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.6 28.6 B 28.9 30.2 mn:A -0.0 -0.3 B 0.3 -0.1 gn: 10 11 2011-Dec-19 03:52:29 INFO3 from_mock: From MOCK: b2s1g0 rms:A 30.8 31.1 B 30.5 28.4 mn:A 0.3 -0.3 B -0.0 0.2 gn: 11 11 2011-Dec-19 03:52:29 INFO3 from_mock: From MOCK: b3s0g0 rms:A 29.5 29.3 B 32.0 28.6 mn:A 0.4 -0.3 B 0.0 -0.2 gn: 12 12 2011-Dec-19 03:52:29 INFO3 from_mock: From MOCK: b3s1g0 rms:A 31.7 31.0 B 31.2 32.5 mn:A -0.3 0.3 B 0.0 0.1 gn: 12 12 2011-Dec-19 03:52:29 INFO3 from_mock: From MOCK: b4s0g0 rms:A 31.3 30.3 B 29.6 29.7 mn:A -0.3 -0.4 B -0.4 0.0 gn: 13 11 2011-Dec-19 03:52:29 INFO3 from_mock: From MOCK: b4s1g0 rms:A 30.7 27.8 B 29.6 28.5 mn:A -0.1 0.0 B -0.5 0.1 gn: 15 12 2011-Dec-19 03:52:29 INFO3 from_mock: From MOCK: b5s0g0 rms:A 30.8 29.6 B 28.9 28.9 mn:A 0.5 0.4 B -0.0 0.4 gn: 12 10 2011-Dec-19 03:52:29 INFO3 from_mock: From MOCK: b5s1g0 rms:A 31.7 31.5 B 29.7 29.4 mn:A -0.4 0.3 B -0.1 0.2 gn: 12 10 2011-Dec-19 03:52:29 INFO3 from_mock: From MOCK: b6s0g0 rms:A 29.9 27.4 B 15.1 15.6 mn:A -0.5 0.1 B 0.3 -0.4 gn: 12 31 2011-Dec-19 03:52:29 INFO3 from_mock: From MOCK: b6s1g0 rms:A 31.3 28.4 B 12.1 11.7 mn:A 0.6 0.5 B -0.0 0.1 gn: 13 31 2011-Dec-19 03:52:29 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-19 03:52:29 LOG5 end_task: Level: (5) ID = <10296> Status = 0 0 0 0 ok 2011-Dec-19 03:52:29 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-19 03:52:29 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-19 03:52:29 LOG5 finish_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2011-Dec-19 03:52:29 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-19 03:52:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 03:52:29 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-19 03:52:29 LOG5 end_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2011-Dec-19 03:52:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-19 03:52:29 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-19 03:52:29 LOG5 finish_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2011-Dec-19 03:52:29 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-19 03:52:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 03:52:29 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-19 03:52:29 LOG5 end_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2011-Dec-19 03:52:29 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Edwin 2011-Dec-19 03:52:29 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Edwin 2011-Dec-19 03:52:29 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Edwin 2011-Dec-19 03:52:29 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Edwin 2011-Dec-19 03:52:29 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-19 03:52:29 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-19 03:52:29 LOG5 begin_task: Level: (3) ID = <10297> Status = 0 0 0 0 ok 2011-Dec-19 03:52:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-19 03:52:29 START begin_task: Starting task 'selecting calibration type' 2011-Dec-19 03:52:29 LOG5 begin_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2011-Dec-19 03:52:29 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-19 03:52:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-19 03:52:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 03:52:30 START begin_task: Starting task 'waiting on setcal' 2011-Dec-19 03:52:30 LOG5 begin_task: Level: (5) ID = <10299> Status = 0 0 0 0 ok 2011-Dec-19 03:52:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Edwin' 2011-Dec-19 03:52:30 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-19 03:52:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 03:52:30 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:52:30 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-19 03:52:30 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-19 03:52:30 LOG5 end_task: Level: (5) ID = <10299> Status = 0 0 0 0 ok 2011-Dec-19 03:52:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-19 03:52:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-19 03:52:30 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-19 03:52:30 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-19 03:52:30 LOG5 begin_task: Level: (5) ID = <10300> Status = 0 0 0 0 ok 2011-Dec-19 03:52:30 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:52:30 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-19 03:52:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-19 03:52:30 LOG5 end_task: Level: (5) ID = <10300> Status = 0 0 0 0 ok 2011-Dec-19 03:52:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-19 03:52:30 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-19 03:52:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-19 03:52:30 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-19 03:52:30 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-19 03:52:30 LOG5 begin_task: Level: (5) ID = <10301> Status = 0 0 0 0 ok 2011-Dec-19 03:52:30 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-19 03:52:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-19 03:52:30 LOG5 end_task: Level: (5) ID = <10301> Status = 0 0 0 0 ok 2011-Dec-19 03:52:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-19 03:52:30 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-19 03:52:30 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-19 03:52:30 LOG5 end_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2011-Dec-19 03:52:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-19 03:52:30 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-19 03:52:30 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-19 03:52:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-19 03:52:30 LOG5 begin_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2011-Dec-19 03:52:30 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-19 03:52:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-19 03:52:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-19 03:52:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-19 03:52:30 LOG5 end_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2011-Dec-19 03:52:30 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-19 03:52:30 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-19 03:52:30 LOG5 begin_task: Level: (4) ID = <10303> Status = 0 0 0 0 ok 2011-Dec-19 03:52:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-19 03:52:30 LOG5 log_alfabeam: Parameters: 8.2966388888888876 22.835555555555555 9.262717 2011.9669033766827 -89.100029 2011-Dec-19 03:52:30 LOG4 log_alfabeam: ALFABEAM 0 8.296638888888891 22.835555555555569 2011-Dec-19 03:52:30 LOG4 log_alfabeam: ALFABEAM 1 8.294605245385583 22.926676954715461 2011-Dec-19 03:52:30 LOG4 log_alfabeam: ALFABEAM 2 8.289237002317602 22.865705488777657 2011-Dec-19 03:52:30 LOG4 log_alfabeam: ALFABEAM 3 8.291303303560781 22.774461341682311 2011-Dec-19 03:52:30 LOG4 log_alfabeam: ALFABEAM 4 8.298711871879291 22.744862626223171 2011-Dec-19 03:52:30 LOG4 log_alfabeam: ALFABEAM 5 8.304037917960214 22.805349133251728 2011-Dec-19 03:52:30 LOG4 log_alfabeam: ALFABEAM 6 8.301997343350003 22.895919857666300 2011-Dec-19 03:52:30 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-19 03:52:30 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-19 03:52:30 LOG3 take_mock_data: PSET configuration: obsnm=Edwin 2011-Dec-19 03:52:30 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_042 2011-Dec-19 03:52:30 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-19 03:52:30 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-19 03:52:30 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-19 03:52:30 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-19 03:52:30 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-19 03:52:30 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-19 03:52:30 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-19 03:52:30 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-19 03:52:30 LOG3 take_mock_data: PSET configuration: patternid=135300024 2011-Dec-19 03:52:30 LOG3 take_mock_data: PSET configuration: scanid=135300025 2011-Dec-19 03:52:30 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-19 03:52:30 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-19 03:52:30 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-19 03:52:30 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456321530.0 2011-Dec-19 03:52:30 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306321530.0 2011-Dec-19 03:52:30 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-19 03:52:30 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-19 03:52:30 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Edwin:object=AGES3193_p3_042:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=135300024:scanid=135300025:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456321530.0:topobfreqhz=1306321530.0:filetype=1 2011-Dec-19 03:52:30 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-19 03:52:30 LOG5 begin_task: Level: (5) ID = <10304> Status = 0 0 0 0 ok 2011-Dec-19 03:52:30 LOG4 from_mock: From MOCK: psetok 2011-Dec-19 03:52:30 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-19 03:52:30 LOG5 end_task: Level: (5) ID = <10304> Status = 0 0 0 0 ok 2011-Dec-19 03:52:30 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-19 03:52:30 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-19 03:52:30 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-19 03:52:30 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-19 03:52:30 LOG5 begin_task: Level: (5) ID = <10305> Status = 0 0 0 0 ok 2011-Dec-19 03:52:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20111219.a2048.0006.fits 2011-Dec-19 03:52:30 LOG4 from_mock: From MOCK: starok 2011-Dec-19 03:52:30 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-19 03:52:30 LOG5 end_task: Level: (5) ID = <10305> Status = 0 0 0 0 ok 2011-Dec-19 03:52:30 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-19 03:52:30 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135300025 2011-Dec-19 03:52:31 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-19 03:52:31 LOG5 begin_task: Level: (5) ID = <10306> Status = 0 0 0 0 ok 2011-Dec-19 03:52:31 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111219.a2048.0006.fits} 2011-Dec-19 03:52:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-19 03:52:31 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-19 03:52:31 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-19 03:52:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-19 03:52:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28352.00 2011-Dec-19 03:52:33 INFO2 got_mock_message: Mock spectrometer start file number is 01500 2011-Dec-19 03:52:33 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-19 03:52:33 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-19 03:52:33 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-19 03:52:33 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-19 03:52:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-19 03:52:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-19 03:52:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-19 03:52:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-19 03:52:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-19 03:52:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-19 03:52:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-19 03:52:33 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-19 03:52:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:52:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:52:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:52:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:52:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:52:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:52:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:52:36 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:52:36.01 2011-Dec-19 03:52:36 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324281156.01 Mon Dec 19 03:52:36 2011 2011-Dec-19 03:52:36 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-19 03:52:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.321530 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-19 03:52:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.321530 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:52:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.321530 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:52:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.321530 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:52:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.321530 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.514 (still bad) 2011-Dec-19 03:52:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.321530 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 03:52:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.321530 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 03:52:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.321530 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-19 03:52:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.321530 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-19 03:52:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-19 03:52:42 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-19 03:52:42 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-19 03:52:42 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-19 03:52:42 LOG5 end_task: Level: (5) ID = <10306> Status = 0 0 0 0 ok 2011-Dec-19 03:52:42 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-19 03:52:42 LOG5 end_task: Level: (4) ID = <10303> Status = 0 0 0 0 ok 2011-Dec-19 03:52:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-19 03:52:42 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-19 03:52:42 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-19 03:52:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-19 03:52:42 LOG5 begin_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2011-Dec-19 03:52:42 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-19 03:52:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-19 03:52:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-19 03:52:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-19 03:52:42 LOG5 end_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2011-Dec-19 03:52:42 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-19 03:52:42 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-19 03:52:42 LOG5 begin_task: Level: (4) ID = <10308> Status = 0 0 0 0 ok 2011-Dec-19 03:52:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-19 03:52:42 LOG5 log_alfabeam: Parameters: 8.2966388888888876 22.835555555555555 9.265780 2011.9669037252515 -89.100029 2011-Dec-19 03:52:42 LOG4 log_alfabeam: ALFABEAM 0 8.296638888888891 22.835555555555565 2011-Dec-19 03:52:42 LOG4 log_alfabeam: ALFABEAM 1 8.294597895865877 22.926645187261748 2011-Dec-19 03:52:42 LOG4 log_alfabeam: ALFABEAM 2 8.289234599079418 22.865592381515977 2011-Dec-19 03:52:42 LOG4 log_alfabeam: ALFABEAM 3 8.291308161389800 22.774380915547599 2011-Dec-19 03:52:42 LOG4 log_alfabeam: ALFABEAM 4 8.298719051688250 22.744893688450112 2011-Dec-19 03:52:42 LOG4 log_alfabeam: ALFABEAM 5 8.304040329527522 22.805462135585174 2011-Dec-19 03:52:42 LOG4 log_alfabeam: ALFABEAM 6 8.301992488230063 22.896002703045621 2011-Dec-19 03:52:42 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-19 03:52:42 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-19 03:52:42 LOG3 take_mock_data: PSET configuration: obsnm=Edwin 2011-Dec-19 03:52:42 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_042 2011-Dec-19 03:52:42 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-19 03:52:42 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-19 03:52:42 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-19 03:52:42 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-19 03:52:42 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-19 03:52:42 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-19 03:52:42 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-19 03:52:42 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-19 03:52:42 LOG3 take_mock_data: PSET configuration: patternid=135300024 2011-Dec-19 03:52:42 LOG3 take_mock_data: PSET configuration: scanid=135300026 2011-Dec-19 03:52:42 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-19 03:52:42 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-19 03:52:42 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-19 03:52:42 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456321530.0 2011-Dec-19 03:52:42 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306321530.0 2011-Dec-19 03:52:42 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-19 03:52:42 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-19 03:52:42 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Edwin:object=AGES3193_p3_042:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=135300024:scanid=135300026:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456321530.0:topobfreqhz=1306321530.0:filetype=1 2011-Dec-19 03:52:42 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-19 03:52:42 LOG5 begin_task: Level: (5) ID = <10309> Status = 0 0 0 0 ok 2011-Dec-19 03:52:42 LOG4 from_mock: From MOCK: psetok 2011-Dec-19 03:52:42 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-19 03:52:42 LOG5 end_task: Level: (5) ID = <10309> Status = 0 0 0 0 ok 2011-Dec-19 03:52:42 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-19 03:52:42 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-19 03:52:42 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-19 03:52:42 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-19 03:52:42 LOG5 begin_task: Level: (5) ID = <10310> Status = 0 0 0 0 ok 2011-Dec-19 03:52:42 LOG4 from_mock: From MOCK: starok 2011-Dec-19 03:52:42 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-19 03:52:42 LOG5 end_task: Level: (5) ID = <10310> Status = 0 0 0 0 ok 2011-Dec-19 03:52:42 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-19 03:52:42 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135300026 2011-Dec-19 03:52:43 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-19 03:52:43 LOG5 begin_task: Level: (5) ID = <10311> Status = 0 0 0 0 ok 2011-Dec-19 03:52:43 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-19 03:52:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-19 03:52:43 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-19 03:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.514 (still bad) 2011-Dec-19 03:52:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-19 03:52:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28364.00 2011-Dec-19 03:52:45 INFO2 got_mock_message: Mock spectrometer start file number is 01600 2011-Dec-19 03:52:45 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-19 03:52:45 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-19 03:52:45 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-19 03:52:45 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-19 03:52:45 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-19 03:52:45 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-19 03:52:45 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-19 03:52:45 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-19 03:52:45 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-19 03:52:45 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-19 03:52:45 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-19 03:52:45 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-19 03:52:45 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:52:45 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:52:45 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:52:45 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:52:45 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:52:45 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:52:45 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-19 03:52:48 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:52:48.02 2011-Dec-19 03:52:48 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324281168.02 Mon Dec 19 03:52:48 2011 2011-Dec-19 03:52:48 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-19 03:52:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.321530 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-19 03:52:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.321530 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:52:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.321530 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:52:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.321530 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:52:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.321530 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:52:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.321530 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 03:52:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.321530 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 03:52:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.321530 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-19 03:52:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.321530 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-19 03:52:49 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-19 03:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-19 03:52:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-19 03:52:54 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-19 03:52:54 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-19 03:52:54 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-19 03:52:54 LOG5 end_task: Level: (5) ID = <10311> Status = 0 0 0 0 ok 2011-Dec-19 03:52:54 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-19 03:52:54 LOG5 end_task: Level: (4) ID = <10308> Status = 0 0 0 0 ok 2011-Dec-19 03:52:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-19 03:52:54 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-19 03:52:54 LOG5 finish_task: Level: (3) ID = <10297> Status = 0 0 0 0 ok 2011-Dec-19 03:52:54 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-19 03:52:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 03:52:54 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-19 03:52:54 LOG5 end_task: Level: (3) ID = <10297> Status = 0 0 0 0 ok 2011-Dec-19 03:52:54 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-19 03:52:54 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 110.85 and ZA = 14.05 2011-Dec-19 03:52:54 LOG3 track_source: Calling 'track_source AGES3193_p3_042 110.85 14.0510265475 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-19 03:52:54 START begin_task: Starting task 'sending tracking commands' 2011-Dec-19 03:52:54 LOG5 begin_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2011-Dec-19 03:52:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_042} INFO {Slewing to source 'AGES3193_p3_042' ...} 2011-Dec-19 03:52:54 INFO1 track_source: Starting to track AGES3193_p3_042 2011-Dec-19 03:52:54 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_042" 2011-Dec-19 03:52:54 LOG3 vw_send: To DATATAKING: set ra 110.85 2011-Dec-19 03:52:54 LOG3 vw_send: To DATATAKING: set dec 14.0510265475 2011-Dec-19 03:52:54 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-19 03:52:54 LOG3 vw_send: To DATATAKING: pnt tr 110.85 14.0510265475 -CF 2011-Dec-19 03:52:54 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 03:52:54 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-19 03:52:54 LOG5 finish_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2011-Dec-19 03:52:54 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-19 03:52:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 03:52:54 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-19 03:52:54 LOG5 end_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2011-Dec-19 03:52:54 LOG1 fixed_driftmap: Parameters: HA = +00:56:59.4 Start = 10:50:41.5 LST = 09:16:08.8 diff = 5672.7 secs 2011-Dec-19 03:52:54 WARNING fixed_driftmap: WARNING RA is more than 1 hour away --- starting anyway! 2011-Dec-19 03:52:54 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-19 03:52:54 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-19 03:52:54 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-19 03:52:54 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-19 03:52:54 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-19 03:52:54 LOG5 begin_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2011-Dec-19 03:52:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-19 03:52:54 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-19 03:52:54 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-19 03:52:54 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-19 03:52:54 LOG3 take_mock_data: PSET configuration: obsnm=Edwin 2011-Dec-19 03:52:54 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_042 2011-Dec-19 03:52:54 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-19 03:52:54 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-19 03:52:54 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-19 03:52:54 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-19 03:52:54 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-19 03:52:54 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-19 03:52:54 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-19 03:52:54 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-19 03:52:54 LOG3 take_mock_data: PSET configuration: patternid=135300027 2011-Dec-19 03:52:54 LOG3 take_mock_data: PSET configuration: scanid=135300027 2011-Dec-19 03:52:54 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-19 03:52:54 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-19 03:52:54 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-19 03:52:54 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456321530.0 2011-Dec-19 03:52:54 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306321530.0 2011-Dec-19 03:52:54 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-19 03:52:54 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-19 03:52:54 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Edwin:object=AGES3193_p3_042:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=135300027:scanid=135300027:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456321530.0:topobfreqhz=1306321530.0:filetype=1 2011-Dec-19 03:52:54 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-19 03:52:54 LOG5 begin_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2011-Dec-19 03:52:54 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_042" 2011-Dec-19 03:52:54 LOG4 got_cormsg: From DATATAKING: set ra 110.85 2011-Dec-19 03:52:54 LOG4 from_mock: From MOCK: psetok 2011-Dec-19 03:52:54 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-19 03:52:54 LOG5 end_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2011-Dec-19 03:52:54 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-19 03:52:54 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-19 03:52:54 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-19 03:52:54 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-19 03:52:54 LOG5 begin_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2011-Dec-19 03:52:54 LOG4 got_cormsg: From DATATAKING: set dec 14.0510265475 2011-Dec-19 03:52:54 LOG4 got_cormsg: From DATATAKING: vw% 110.85 2011-Dec-19 03:52:54 LOG4 from_mock: From MOCK: starok 2011-Dec-19 03:52:54 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-19 03:52:54 LOG5 end_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2011-Dec-19 03:52:54 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-19 03:52:54 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 135300027 2011-Dec-19 03:52:55 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-19 03:52:55 LOG5 begin_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2011-Dec-19 03:52:55 LOG4 got_cormsg: From DATATAKING: vw% 14.0510265475 2011-Dec-19 03:52:55 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-19 03:52:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-19 03:52:55 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:52:55 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-19 03:52:55 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-19 03:52:55 LOG4 got_cormsg: From DATATAKING: pnt tr 110.85 14.0510265475 -CF 2011-Dec-19 03:52:55 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-19 03:52:55 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-19 03:52:55 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 03:52:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-19 03:52:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28376.00 2011-Dec-19 03:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-19 03:52:57 INFO2 got_mock_message: Mock spectrometer start file number is 01700 2011-Dec-19 03:52:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.321530 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-19 03:52:57 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-19 03:52:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.321530 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:52:57 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2011-Dec-19 03:52:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.321530 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:52:57 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-19 03:52:57 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-19 03:52:57 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-19 03:52:57 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-19 03:52:57 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-19 03:52:57 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-19 03:52:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.321530 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:52:57 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-19 03:52:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.321530 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 03:52:57 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-19 03:52:57 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-19 03:52:57 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-19 03:52:57 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 03:52:57 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 03:52:57 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 03:52:57 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 03:52:57 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 03:52:57 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 03:52:57 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-19 03:52:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.321530 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 03:52:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.321530 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 03:52:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.321530 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-19 03:52:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.321530 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-19 03:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-19 03:52:58 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2011-Dec-19 03:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-19 03:53:00 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:53:00.01 2011-Dec-19 03:53:00 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324281180.01 Mon Dec 19 03:53:00 2011 2011-Dec-19 03:53:00 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-19 03:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-19 03:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:53:06 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2011-Dec-19 03:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 03:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-19 03:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-19 03:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-19 03:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-19 03:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-19 03:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-19 03:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-19 03:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-19 03:53:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:53:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 0.904 0.957 0.941 2011-Dec-19 03:53:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.975 1.049 1.099 0.943 2011-Dec-19 03:53:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.886 0.976 1.032 0.936 2011-Dec-19 03:53:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.014 1.010 0.014 2011-Dec-19 03:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-19 03:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-19 03:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 03:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.157 (still bad) 2011-Dec-19 03:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.166 (still bad) 2011-Dec-19 03:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.172 (still bad) 2011-Dec-19 03:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.170 (still bad) 2011-Dec-19 03:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.166 (still bad) 2011-Dec-19 03:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.154 (still bad) 2011-Dec-19 03:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-19 03:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-19 03:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-19 03:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 03:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 03:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-19 03:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-19 03:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-19 03:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-19 03:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-19 03:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-19 03:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-19 03:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-19 03:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-19 03:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 03:54:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:54:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.914 0.885 0.950 0.936 2011-Dec-19 03:54:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.976 1.050 1.096 0.938 2011-Dec-19 03:54:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.883 0.969 1.031 0.935 2011-Dec-19 03:54:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.014 1.008 0.014 2011-Dec-19 03:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 03:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 03:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2011-Dec-19 03:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 03:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 03:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 03:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 03:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 03:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2011-Dec-19 03:55:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:55:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.914 0.886 0.949 0.932 2011-Dec-19 03:55:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.973 1.044 1.096 0.936 2011-Dec-19 03:55:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.879 0.969 1.030 0.934 2011-Dec-19 03:55:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.014 1.008 0.014 2011-Dec-19 03:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-19 03:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-19 03:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-19 03:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 03:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-19 03:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 03:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2011-Dec-19 03:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 03:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 03:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-19 03:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 03:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2011-Dec-19 03:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2011-Dec-19 03:56:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:56:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.915 0.885 0.949 0.930 2011-Dec-19 03:56:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.971 1.042 1.095 0.934 2011-Dec-19 03:56:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.880 0.967 1.033 0.935 2011-Dec-19 03:56:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.927 0.014 1.010 0.014 2011-Dec-19 03:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2011-Dec-19 03:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-19 03:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 03:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-19 03:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-19 03:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-19 03:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-19 03:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-19 03:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:57:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:57:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.917 0.883 0.949 0.932 2011-Dec-19 03:57:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.972 1.040 1.096 0.934 2011-Dec-19 03:57:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.885 0.977 1.049 0.950 2011-Dec-19 03:57:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 0.014 1.009 0.014 2011-Dec-19 03:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-19 03:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-19 03:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-19 03:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-19 03:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-19 03:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-19 03:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-19 03:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-19 03:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-19 03:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 03:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-19 03:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-19 03:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-19 03:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-19 03:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-19 03:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-19 03:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-19 03:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-19 03:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-19 03:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-19 03:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-19 03:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-19 03:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-19 03:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-19 03:58:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:58:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 0.889 0.949 0.929 2011-Dec-19 03:58:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.972 1.042 1.096 0.934 2011-Dec-19 03:58:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.880 0.965 1.031 0.932 2011-Dec-19 03:58:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.014 1.008 0.014 2011-Dec-19 03:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 03:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-19 03:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 03:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2011-Dec-19 03:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 03:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2011-Dec-19 03:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2011-Dec-19 03:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 03:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 03:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2011-Dec-19 03:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2011-Dec-19 03:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 03:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:59:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 03:59:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.917 0.885 0.946 0.928 2011-Dec-19 03:59:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.971 1.041 1.095 0.934 2011-Dec-19 03:59:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.879 0.967 1.032 0.935 2011-Dec-19 03:59:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 0.014 1.010 0.014 2011-Dec-19 03:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 03:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 03:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2011-Dec-19 03:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 03:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 03:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 03:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2011-Dec-19 03:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 04:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 04:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 04:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 04:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 04:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 04:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 04:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 04:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 04:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 04:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 04:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 04:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 04:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 04:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 04:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 04:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 04:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-19 04:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-19 04:00:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 04:00:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.919 0.885 0.946 0.929 2011-Dec-19 04:00:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.971 1.041 1.102 0.940 2011-Dec-19 04:00:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.880 0.967 1.033 0.933 2011-Dec-19 04:00:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.014 1.011 0.014 2011-Dec-19 04:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-19 04:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-19 04:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-19 04:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-19 04:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-19 04:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-19 04:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-19 04:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2011-Dec-19 04:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2011-Dec-19 04:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2011-Dec-19 04:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2011-Dec-19 04:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 04:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 04:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 04:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2011-Dec-19 04:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2011-Dec-19 04:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2011-Dec-19 04:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2011-Dec-19 04:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2011-Dec-19 04:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2011-Dec-19 04:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2011-Dec-19 04:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2011-Dec-19 04:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2011-Dec-19 04:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 04:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 04:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 04:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 04:01:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 04:01:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.916 0.882 0.946 0.929 2011-Dec-19 04:01:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.968 1.041 1.094 0.933 2011-Dec-19 04:01:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.878 0.966 1.029 0.932 2011-Dec-19 04:01:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 0.014 1.009 0.014 2011-Dec-19 04:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2011-Dec-19 04:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2011-Dec-19 04:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 04:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2011-Dec-19 04:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 04:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2011-Dec-19 04:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2011-Dec-19 04:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2011-Dec-19 04:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2011-Dec-19 04:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2011-Dec-19 04:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:02:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 04:02:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.916 0.884 0.945 0.928 2011-Dec-19 04:02:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.967 1.041 1.088 0.931 2011-Dec-19 04:02:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.876 0.964 1.027 0.933 2011-Dec-19 04:02:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.014 1.007 0.014 2011-Dec-19 04:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2011-Dec-19 04:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2011-Dec-19 04:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2011-Dec-19 04:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2011-Dec-19 04:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 04:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2011-Dec-19 04:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2011-Dec-19 04:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2011-Dec-19 04:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:03:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 04:03:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.913 0.877 0.945 0.930 2011-Dec-19 04:03:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.970 1.044 1.091 0.933 2011-Dec-19 04:03:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.891 0.990 1.056 0.957 2011-Dec-19 04:03:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.014 1.006 0.014 2011-Dec-19 04:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2011-Dec-19 04:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2011-Dec-19 04:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 04:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 04:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-19 04:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-19 04:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-19 04:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-19 04:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-19 04:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-19 04:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-19 04:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-19 04:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-19 04:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 04:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-19 04:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-19 04:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-19 04:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-19 04:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-19 04:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-19 04:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-19 04:04:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 04:04:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.917 0.881 0.942 0.926 2011-Dec-19 04:04:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.966 1.042 1.100 0.938 2011-Dec-19 04:04:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.874 0.965 1.026 0.932 2011-Dec-19 04:04:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.014 1.007 0.014 2011-Dec-19 04:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 04:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2011-Dec-19 04:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2011-Dec-19 04:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2011-Dec-19 04:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2011-Dec-19 04:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 04:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2011-Dec-19 04:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2011-Dec-19 04:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 04:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-19 04:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-19 04:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-19 04:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-19 04:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 04:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-19 04:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2011-Dec-19 04:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2011-Dec-19 04:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:05:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 04:05:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.914 0.879 0.944 0.926 2011-Dec-19 04:05:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.963 1.038 1.089 0.930 2011-Dec-19 04:05:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.872 0.964 1.025 0.931 2011-Dec-19 04:05:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.014 1.006 0.014 2011-Dec-19 04:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2011-Dec-19 04:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2011-Dec-19 04:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:06:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 04:06:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.914 0.875 0.942 0.926 2011-Dec-19 04:06:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.961 1.037 1.087 0.929 2011-Dec-19 04:06:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.871 0.962 1.025 0.929 2011-Dec-19 04:06:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.014 1.003 0.014 2011-Dec-19 04:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2011-Dec-19 04:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2011-Dec-19 04:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:07:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 04:07:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.917 0.879 0.943 0.926 2011-Dec-19 04:07:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.961 1.036 1.088 0.930 2011-Dec-19 04:07:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.871 0.962 1.025 0.928 2011-Dec-19 04:07:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.014 1.006 0.014 2011-Dec-19 04:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2011-Dec-19 04:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:08:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 04:08:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.917 0.878 0.951 0.933 2011-Dec-19 04:08:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.963 1.036 1.088 0.929 2011-Dec-19 04:08:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.868 0.962 1.024 0.929 2011-Dec-19 04:08:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.014 1.008 0.014 2011-Dec-19 04:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2011-Dec-19 04:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2011-Dec-19 04:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2011-Dec-19 04:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:09:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 04:09:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.916 0.873 0.942 0.925 2011-Dec-19 04:09:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.965 1.039 1.090 0.929 2011-Dec-19 04:09:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.869 0.962 1.028 0.927 2011-Dec-19 04:09:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.014 1.003 0.014 2011-Dec-19 04:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:10:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 04:10:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.915 0.874 0.942 0.925 2011-Dec-19 04:10:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.963 1.035 1.087 0.928 2011-Dec-19 04:10:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.870 0.962 1.027 0.926 2011-Dec-19 04:10:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.927 0.014 1.011 0.014 2011-Dec-19 04:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2011-Dec-19 04:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2011-Dec-19 04:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:11:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 04:11:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.913 0.872 0.943 0.925 2011-Dec-19 04:11:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.963 1.036 1.089 0.926 2011-Dec-19 04:11:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.869 0.961 1.021 0.926 2011-Dec-19 04:11:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.919 0.014 1.002 0.014 2011-Dec-19 04:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2011-Dec-19 04:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2011-Dec-19 04:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2011-Dec-19 04:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-19 04:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:12:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 04:12:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.915 0.871 0.940 0.920 2011-Dec-19 04:12:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.958 1.033 1.087 0.926 2011-Dec-19 04:12:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.868 0.959 1.023 0.925 2011-Dec-19 04:12:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.920 0.014 1.003 0.014 2011-Dec-19 04:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-19 04:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:12:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-19 04:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:13:01 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-19 04:13:01 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-19 04:13:01 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-19 04:13:01 LOG5 end_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2011-Dec-19 04:13:01 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-19 04:13:01 LOG5 end_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2011-Dec-19 04:13:01 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-19 04:13:01 LOG5 finish_task: Level: (2) ID = <10276> Status = 0 0 0 0 ok 2011-Dec-19 04:13:01 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-19 04:13:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-19 04:13:01 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-19 04:13:01 LOG5 end_task: Level: (2) ID = <10276> Status = 0 0 0 0 ok 2011-Dec-19 04:13:01 COMMAND run_command_line: EXECUTING command 48: 'ENDIF' 2011-Dec-19 04:13:01 COMMAND run_command_line: EXECUTING command 55: 'LOAD togs_cima31.conf' 2011-Dec-19 04:13:01 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2011-Dec-19 04:13:01 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-19 04:13:01 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2011-Dec-19 04:13:01 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima31.conf' 2011-Dec-19 04:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2011-Dec-19 04:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2011-Dec-19 04:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2011-Dec-19 04:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2011-Dec-19 04:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2011-Dec-19 04:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2011-Dec-19 04:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2011-Dec-19 04:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2011-Dec-19 04:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2011-Dec-19 04:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2011-Dec-19 04:13:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2011-Dec-19 04:13:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2011-Dec-19 04:13:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-19 04:13:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-19 04:13:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-19 04:13:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-19 04:13:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2011-Dec-19 04:13:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2011-Dec-19 04:13:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2011-Dec-19 04:13:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2011-Dec-19 04:13:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2011-Dec-19 04:13:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2011-Dec-19 04:13:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2011-Dec-19 04:13:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2011-Dec-19 04:13:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-19 04:13:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-19 04:13:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-19 04:13:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-19 04:13:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2011-Dec-19 04:13:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2011-Dec-19 04:13:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2011-Dec-19 04:13:03 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-19 04:13:03 BEGIN begin_task: Starting task 'configuring IF/LO path' 2011-Dec-19 04:13:03 LOG5 begin_task: Level: (2) ID = <10317> Status = 0 0 0 0 ok 2011-Dec-19 04:13:03 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2011-Dec-19 04:13:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2011-Dec-19 04:13:03 LOG1 config_iflo: Receiver ALFA already selected 2011-Dec-19 04:13:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-19 04:13:03 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-19 04:13:03 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-19 04:13:03 LOG5 begin_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2011-Dec-19 04:13:03 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-19 04:13:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-19 04:13:03 LOG5 end_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2011-Dec-19 04:13:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-19 04:13:03 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-19 04:13:03 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2011-Dec-19 04:13:03 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2011-Dec-19 04:13:03 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2011-Dec-19 04:13:03 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2011-Dec-19 04:13:03 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2011-Dec-19 04:13:03 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2011-Dec-19 04:13:03 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2011-Dec-19 04:13:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2011-Dec-19 04:13:03 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2011-Dec-19 04:13:03 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2011-Dec-19 04:13:03 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2011-Dec-19 04:13:03 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2011-Dec-19 04:13:03 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2011-Dec-19 04:13:03 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2011-Dec-19 04:13:03 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2011-Dec-19 04:13:03 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2011-Dec-19 04:13:03 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2011-Dec-19 04:13:03 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2011-Dec-19 04:13:03 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2011-Dec-19 04:13:03 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2011-Dec-19 04:13:03 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2011-Dec-19 04:13:03 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2011-Dec-19 04:13:03 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2011-Dec-19 04:13:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 04:13:03 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2011-Dec-19 04:13:03 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2011-Dec-19 04:13:03 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2011-Dec-19 04:13:03 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2011-Dec-19 04:13:03 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2011-Dec-19 04:13:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2011-Dec-19 04:13:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 04:13:03 START begin_task: Starting task 'waiting on configuring IF/LO path' 2011-Dec-19 04:13:03 LOG5 begin_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2011-Dec-19 04:13:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2011-Dec-19 04:13:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2011-Dec-19 04:13:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 04:13:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 04:13:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 04:13:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 04:13:04 LOG4 got_cormsg: From DATATAKING: vw% DONE 2011-Dec-19 04:13:04 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2011-Dec-19 04:13:04 LOG5 end_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2011-Dec-19 04:13:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2011-Dec-19 04:13:04 STOP finish_task: Finishing task 'configuring IF/LO path' 2011-Dec-19 04:13:04 LOG5 finish_task: Level: (2) ID = <10317> Status = 0 0 0 0 ok 2011-Dec-19 04:13:04 DONE finish_task: DONE finished configuration: IF/LO path 2011-Dec-19 04:13:04 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-19 04:13:05 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2011-Dec-19 04:13:05 LOG5 end_task: Level: (2) ID = <10317> Status = 0 0 0 0 ok 2011-Dec-19 04:13:05 BEGIN begin_task: Starting task 'configuring WAPPs' 2011-Dec-19 04:13:05 LOG5 begin_task: Level: (2) ID = <10320> Status = 0 0 0 0 ok 2011-Dec-19 04:13:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2011-Dec-19 04:13:05 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2011-Dec-19 04:13:05 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Dec-19 04:13:05 START begin_task: Starting task 'selecting calibration port' 2011-Dec-19 04:13:05 LOG5 begin_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2011-Dec-19 04:13:05 LOG3 vw_send: To DATATAKING: calport 3 2011-Dec-19 04:13:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Dec-19 04:13:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 04:13:05 START begin_task: Starting task 'waiting on calport' 2011-Dec-19 04:13:05 LOG5 begin_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2011-Dec-19 04:13:05 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 04:13:05 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Dec-19 04:13:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 04:13:05 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 04:13:05 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-19 04:13:05 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Dec-19 04:13:05 LOG5 end_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2011-Dec-19 04:13:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Dec-19 04:13:05 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Dec-19 04:13:05 LOG5 end_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2011-Dec-19 04:13:05 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-19 04:13:05 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-19 04:13:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-19 04:13:05 LOG5 begin_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2011-Dec-19 04:13:05 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 04:13:05 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-19 04:13:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-19 04:13:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-19 04:13:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-19 04:13:05 LOG5 end_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2011-Dec-19 04:13:05 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2011-Dec-19 04:13:05 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2011-Dec-19 04:13:05 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2011-Dec-19 04:13:05 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2011-Dec-19 04:13:05 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2011-Dec-19 04:13:05 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2011-Dec-19 04:13:05 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2011-Dec-19 04:13:05 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2011-Dec-19 04:13:05 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Edwin 2011-Dec-19 04:13:05 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Edwin 2011-Dec-19 04:13:05 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Edwin 2011-Dec-19 04:13:05 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Edwin 2011-Dec-19 04:13:05 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Dec-19 04:13:05 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Dec-19 04:13:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-19 04:13:05 LOG5 begin_task: Level: (3) ID = <10324> Status = 0 0 0 0 ok 2011-Dec-19 04:13:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2011-Dec-19 04:13:06 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-19 04:13:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2011-Dec-19 04:13:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-19 04:13:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Edwin' 2011-Dec-19 04:13:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-19 04:13:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-19 04:13:06 LOG5 end_task: Level: (3) ID = <10324> Status = 0 0 0 0 ok 2011-Dec-19 04:13:06 LOG3 sock_errsend: To WAPPDATA: FLUSH 2011-Dec-19 04:13:06 STOP finish_task: Finishing task 'configuring WAPPs' 2011-Dec-19 04:13:06 LOG5 finish_task: Level: (2) ID = <10320> Status = 0 0 0 0 ok 2011-Dec-19 04:13:06 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2011-Dec-19 04:13:06 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-19 04:13:06 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2011-Dec-19 04:13:06 LOG5 end_task: Level: (2) ID = <10320> Status = 0 0 0 0 ok 2011-Dec-19 04:13:06 COMMAND run_command_line: EXECUTING command 56: 'TRACKCURPOS' 2011-Dec-19 04:13:06 BEGIN begin_task: Starting task 'tracking current position' 2011-Dec-19 04:13:06 LOG5 begin_task: Level: (2) ID = <10325> Status = 0 0 0 0 ok 2011-Dec-19 04:13:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2011-Dec-19 04:13:06 INFO1 track_current_pos: Starting to track the current commanded position RA = 08:38:41.6 and Dec = +22:50:37.2 2011-Dec-19 04:13:06 LOG3 track_source: Calling 'track_source Cur-pos 083841.6 225037.2 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2011-Dec-19 04:13:06 START begin_task: Starting task 'sending tracking commands' 2011-Dec-19 04:13:06 LOG5 begin_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2011-Dec-19 04:13:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2011-Dec-19 04:13:06 INFO1 track_source: Starting to track Cur-pos 2011-Dec-19 04:13:06 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2011-Dec-19 04:13:06 LOG3 vw_send: To DATATAKING: set ra 083841.6 2011-Dec-19 04:13:06 LOG3 vw_send: To DATATAKING: set dec 225037.2 2011-Dec-19 04:13:06 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-19 04:13:06 LOG3 vw_send: To DATATAKING: pnt tr 083841.6 225037.2 -CJ 2011-Dec-19 04:13:06 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2011-Dec-19 04:13:06 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-19 04:13:06 LOG5 finish_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2011-Dec-19 04:13:06 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-19 04:13:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 04:13:06 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-19 04:13:06 LOG5 end_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2011-Dec-19 04:13:06 START begin_task: Starting task 'waiting on telescope' 2011-Dec-19 04:13:06 LOG5 begin_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2011-Dec-19 04:13:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-19 04:13:06 LOG3 waittrk: Start waittrk 5 2011-Dec-19 04:13:06 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-19 04:13:06 LOG5 begin_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2011-Dec-19 04:13:06 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2011-Dec-19 04:13:06 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2011-Dec-19 04:13:06 LOG4 got_cormsg: From DATATAKING: set ra 083841.6 2011-Dec-19 04:13:06 LOG4 got_cormsg: From DATATAKING: set dec 225037.2 2011-Dec-19 04:13:06 LOG4 got_cormsg: From DATATAKING: vw% 083841.6 2011-Dec-19 04:13:06 LOG4 got_cormsg: From DATATAKING: vw% 225037.2 2011-Dec-19 04:13:06 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 04:13:06 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-19 04:13:06 LOG4 got_cormsg: From DATATAKING: pnt tr 083841.6 225037.2 -CJ 2011-Dec-19 04:13:06 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2011-Dec-19 04:13:06 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-19 04:13:06 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 04:13:11 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-19 04:13:11 LOG5 end_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2011-Dec-19 04:13:11 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-19 04:13:11 LOG5 begin_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2011-Dec-19 04:13:15 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-19 04:13:15 LOG5 end_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2011-Dec-19 04:13:15 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-19 04:13:15 INFO2 waittrk: Now tracking Cur-pos 2011-Dec-19 04:13:15 LOG4 waittrk: Current telescope position: Az = 110.53 ZA = 14.10 2011-Dec-19 04:13:15 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-19 04:13:15 LOG5 finish_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2011-Dec-19 04:13:15 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-19 04:13:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 04:13:15 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-19 04:13:15 LOG5 end_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2011-Dec-19 04:13:15 STOP finish_task: Finishing task 'tracking current position' 2011-Dec-19 04:13:15 LOG5 finish_task: Level: (2) ID = <10325> Status = 0 0 0 0 ok 2011-Dec-19 04:13:15 DONE finish_task: DONE finished tracking: current position 2011-Dec-19 04:13:15 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-19 04:13:15 END end_task: Finishing task 'tracking current position' with status 'OK' 2011-Dec-19 04:13:15 LOG5 end_task: Level: (2) ID = <10325> Status = 0 0 0 0 ok 2011-Dec-19 04:13:16 COMMAND run_command_line: EXECUTING command 57: 'ALFAANGLE 19' 2011-Dec-19 04:13:16 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2011-Dec-19 04:13:16 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2011-Dec-19 04:13:16 LOG5 begin_task: Level: (2) ID = <10330> Status = 0 0 0 0 ok 2011-Dec-19 04:13:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2011-Dec-19 04:13:16 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2011-Dec-19 04:13:16 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2011-Dec-19 04:13:16 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-19 04:13:16 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-19 04:13:16 LOG5 begin_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2011-Dec-19 04:14:16 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-19 04:14:16 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2011-Dec-19 04:14:16 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-19 04:14:16 LOG5 end_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2011-Dec-19 04:14:16 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-19 04:14:17 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2011-Dec-19 04:14:17 LOG5 finish_task: Level: (2) ID = <10330> Status = 0 0 0 0 ok 2011-Dec-19 04:14:17 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2011-Dec-19 04:14:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-19 04:14:17 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2011-Dec-19 04:14:17 LOG5 end_task: Level: (2) ID = <10330> Status = 0 0 0 0 ok 2011-Dec-19 04:14:17 COMMAND run_command_line: EXECUTING command 61: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2011-Dec-19 04:14:17 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2011-Dec-19 04:14:17 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-19 04:14:17 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2011-Dec-19 04:14:17 BEGIN begin_task: Starting task 'smart frequency switching' 2011-Dec-19 04:14:17 LOG5 begin_task: Level: (2) ID = <10332> Status = 0 0 0 0 ok 2011-Dec-19 04:14:17 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2011-Dec-19 04:14:17 INFO1 smartfreq: Starting pattern: Smart frequency switching 2011-Dec-19 04:14:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2011-Dec-19 04:14:17 START begin_task: Starting task 'selecting calibration type' 2011-Dec-19 04:14:17 LOG5 begin_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2011-Dec-19 04:14:17 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-19 04:14:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-19 04:14:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 04:14:17 START begin_task: Starting task 'waiting on setcal' 2011-Dec-19 04:14:17 LOG5 begin_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2011-Dec-19 04:14:17 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-19 04:14:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 04:14:17 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 04:14:17 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-19 04:14:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-19 04:14:17 LOG5 end_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2011-Dec-19 04:14:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-19 04:14:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-19 04:14:17 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-19 04:14:17 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-19 04:14:17 LOG5 begin_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2011-Dec-19 04:14:17 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 04:14:17 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-19 04:14:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-19 04:14:17 LOG5 end_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2011-Dec-19 04:14:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-19 04:14:17 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-19 04:14:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-19 04:14:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-19 04:14:17 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-19 04:14:17 LOG5 begin_task: Level: (4) ID = <10336> Status = 0 0 0 0 ok 2011-Dec-19 04:14:17 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-19 04:14:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-19 04:14:17 LOG5 end_task: Level: (4) ID = <10336> Status = 0 0 0 0 ok 2011-Dec-19 04:14:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-19 04:14:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-19 04:14:17 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-19 04:14:17 LOG5 end_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2011-Dec-19 04:14:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Edwin 2011-Dec-19 04:14:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Edwin 2011-Dec-19 04:14:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Edwin 2011-Dec-19 04:14:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Edwin 2011-Dec-19 04:14:18 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2011-Dec-19 04:14:18 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-19 04:14:18 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2011-Dec-19 04:14:18 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-19 04:14:18 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-19 04:14:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-19 04:14:18 LOG5 begin_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2011-Dec-19 04:14:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Edwin' 2011-Dec-19 04:14:18 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-19 04:14:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-19 04:14:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-19 04:14:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-19 04:14:18 LOG5 end_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2011-Dec-19 04:14:18 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2011-Dec-19 04:14:18 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-19 04:14:18 LOG5 begin_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2011-Dec-19 04:14:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2011-Dec-19 04:14:18 INFO2 adjust_power: Starting to adjust WAPP power 2011-Dec-19 04:14:18 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-19 04:14:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-19 04:14:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 04:14:18 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-19 04:14:18 LOG5 begin_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2011-Dec-19 04:14:18 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-19 04:14:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-19 04:14:18 NOTE WAPPDATA-new_file: New FITS file: wapp.20111219.a2048.0007.fits 2011-Dec-19 04:14:18 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111219.a2048.0007.fits} 2011-Dec-19 04:14:21 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 04:14:21 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-19 04:14:21 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-19 04:14:21 LOG5 end_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2011-Dec-19 04:14:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-19 04:14:21 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-19 04:14:21 LOG5 begin_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2011-Dec-19 04:14:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-19 04:14:21 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 04:14:21 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 04:14:21 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 04:14:21 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-19 04:14:21 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-19 04:14:21 LOG5 begin_task: Level: (5) ID = <10341> Status = 0 0 0 0 ok 2011-Dec-19 04:14:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-19 04:14:21 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 04:14:21 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 8 6 dB 2011-Dec-19 04:14:21 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 3 3 dB 2011-Dec-19 04:14:21 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 3 dB 2011-Dec-19 04:14:21 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2011-Dec-19 04:14:21 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-19 04:14:21 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-19 04:14:21 LOG5 end_task: Level: (5) ID = <10341> Status = 0 0 0 0 ok 2011-Dec-19 04:14:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.900 1.118 ALFA beam 1: 0.972 1.018 2011-Dec-19 04:14:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.937 1.060 ALFA beam 3: 1.075 0.930 2011-Dec-19 04:14:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.860 0.927 ALFA beam 5: 0.958 1.094 2011-Dec-19 04:14:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.918 0.014 ALFA beam 7: 1.002 0.014 2011-Dec-19 04:14:21 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-19 04:14:21 LOG5 finish_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2011-Dec-19 04:14:21 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-19 04:14:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 04:14:21 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-19 04:14:21 LOG5 end_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2011-Dec-19 04:14:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-19 04:14:21 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-19 04:14:21 LOG5 finish_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2011-Dec-19 04:14:21 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2011-Dec-19 04:14:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-19 04:14:22 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-19 04:14:22 LOG5 end_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2011-Dec-19 04:14:22 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2011-Dec-19 04:14:22 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-19 04:14:22 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2011-Dec-19 04:14:22 LOG5 antvel: Calling 'antvel 83841.600000 225037.200000 J Topocentric 0' 2011-Dec-19 04:14:22 LOG2 antvel: Precessing RA = 08:38:41.6 Dec = +22:50:37.2 Epoch = 2011.96694 J 2011-Dec-19 04:14:22 LOG2 antvel: Computed apparent RA = 08:39:25.8 Dec = +22:47:52.2 2011-Dec-19 04:14:22 LOG2 antvel: Parameters to Doppler: Topocentric 29661 2011 353 0.0 2011-Dec-19 04:14:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-19 04:14:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2011-Dec-19 04:14:22 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2011-Dec-19 04:14:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-19 04:14:22 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-19 04:14:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-19 04:14:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 04:14:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2011-Dec-19 04:14:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-19 04:14:22 LOG5 begin_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2011-Dec-19 04:14:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-19 04:14:22 LOG5 log_alfabeam: Parameters: 8.6448888888888895 22.843666666666667 9.627880 2011.9669449197656 18.999933 2011-Dec-19 04:14:22 LOG4 log_alfabeam: ALFABEAM 0 8.644888888888895 22.843666666666667 2011-Dec-19 04:14:22 LOG4 log_alfabeam: ALFABEAM 1 8.652525272940949 22.832636430633958 2011-Dec-19 04:14:22 LOG4 log_alfabeam: ALFABEAM 2 8.648980887989648 22.917556591243532 2011-Dec-19 04:14:22 LOG4 log_alfabeam: ALFABEAM 3 8.641341634278733 22.928965655949682 2011-Dec-19 04:14:22 LOG4 log_alfabeam: ALFABEAM 4 8.637247962905874 22.854368911040648 2011-Dec-19 04:14:22 LOG4 log_alfabeam: ALFABEAM 5 8.640829077147142 22.769223252591544 2011-Dec-19 04:14:22 LOG4 log_alfabeam: ALFABEAM 6 8.648466969618175 22.758899734066908 2011-Dec-19 04:14:22 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135300028 2011-Dec-19 04:14:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-19 04:14:22 LOG5 begin_task: Level: (4) ID = <10343> Status = 0 0 0 0 ok 2011-Dec-19 04:14:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-19 04:14:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-19 04:14:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 04:14:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 04:14:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 04:14:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-19 04:14:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29663.00 2011-Dec-19 04:14:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-19 04:14:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 04:14:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 04:14:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 04:14:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 04:14:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 04:14:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 04:14:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-19 04:14:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-19 04:14:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-19 04:14:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.914 1.141 0.948 1.018 2011-Dec-19 04:14:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.933 1.083 1.108 0.936 2011-Dec-19 04:14:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.856 0.926 0.986 1.123 2011-Dec-19 04:14:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.892 0.014 0.975 0.014 2011-Dec-19 04:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-19 04:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.143 (still bad) 2011-Dec-19 04:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.141 (still bad) 2011-Dec-19 04:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.145 (still bad) 2011-Dec-19 04:14:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-19 04:14:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-19 04:14:33 LOG5 end_task: Level: (4) ID = <10343> Status = 0 0 0 0 ok 2011-Dec-19 04:14:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-19 04:14:33 LOG5 end_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2011-Dec-19 04:14:33 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2011-Dec-19 04:14:33 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-19 04:14:33 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2011-Dec-19 04:14:33 LOG5 antvel: Calling 'antvel 83841.600000 225037.200000 J Topocentric 0' 2011-Dec-19 04:14:33 LOG2 antvel: Precessing RA = 08:38:41.6 Dec = +22:50:37.2 Epoch = 2011.96695 J 2011-Dec-19 04:14:33 LOG2 antvel: Computed apparent RA = 08:39:25.8 Dec = +22:47:52.2 2011-Dec-19 04:14:33 LOG2 antvel: Parameters to Doppler: Topocentric 29672 2011 353 0.0 2011-Dec-19 04:14:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-19 04:14:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2011-Dec-19 04:14:33 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2011-Dec-19 04:14:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-19 04:14:33 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-19 04:14:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-19 04:14:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 04:14:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2011-Dec-19 04:14:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-19 04:14:33 LOG5 begin_task: Level: (3) ID = <10344> Status = 0 0 0 0 ok 2011-Dec-19 04:14:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-19 04:14:33 LOG5 log_alfabeam: Parameters: 8.6448888888888895 22.843666666666667 9.630944 2011.9669452683347 18.999933 2011-Dec-19 04:14:33 LOG4 log_alfabeam: ALFABEAM 0 8.644888888888891 22.843666666666667 2011-Dec-19 04:14:33 LOG4 log_alfabeam: ALFABEAM 1 8.652526135073151 22.832750374335518 2011-Dec-19 04:14:33 LOG4 log_alfabeam: ALFABEAM 2 8.648975091651245 22.917618194257486 2011-Dec-19 04:14:33 LOG4 log_alfabeam: ALFABEAM 3 8.641334941468234 22.928912036439272 2011-Dec-19 04:14:33 LOG4 log_alfabeam: ALFABEAM 4 8.637247142338227 22.854255629285387 2011-Dec-19 04:14:33 LOG4 log_alfabeam: ALFABEAM 5 8.640834829717560 22.769163698544045 2011-Dec-19 04:14:33 LOG4 log_alfabeam: ALFABEAM 6 8.648473509685031 22.758952180422639 2011-Dec-19 04:14:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135300029 2011-Dec-19 04:14:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-19 04:14:34 LOG5 begin_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2011-Dec-19 04:14:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-19 04:14:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-19 04:14:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 04:14:34 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 04:14:34 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 04:14:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-19 04:14:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29675.00 2011-Dec-19 04:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.146 (still bad) 2011-Dec-19 04:14:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-19 04:14:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 04:14:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 04:14:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 04:14:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 04:14:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 04:14:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 04:14:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-19 04:14:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-19 04:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.173 (still bad) 2011-Dec-19 04:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.173 (still bad) 2011-Dec-19 04:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.172 (still bad) 2011-Dec-19 04:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.172 (still bad) 2011-Dec-19 04:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.174 (still bad) 2011-Dec-19 04:14:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-19 04:14:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-19 04:14:45 LOG5 end_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2011-Dec-19 04:14:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-19 04:14:45 LOG5 end_task: Level: (3) ID = <10344> Status = 0 0 0 0 ok 2011-Dec-19 04:14:45 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2011-Dec-19 04:14:45 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-19 04:14:45 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2011-Dec-19 04:14:45 LOG5 antvel: Calling 'antvel 83841.600000 225037.200000 J Topocentric 0' 2011-Dec-19 04:14:45 LOG2 antvel: Precessing RA = 08:38:41.6 Dec = +22:50:37.2 Epoch = 2011.96695 J 2011-Dec-19 04:14:45 LOG2 antvel: Computed apparent RA = 08:39:25.8 Dec = +22:47:52.2 2011-Dec-19 04:14:45 LOG2 antvel: Parameters to Doppler: Topocentric 29685 2011 353 0.0 2011-Dec-19 04:14:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-19 04:14:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2011-Dec-19 04:14:45 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2011-Dec-19 04:14:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-19 04:14:45 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-19 04:14:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-19 04:14:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 04:14:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2011-Dec-19 04:14:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-19 04:14:45 LOG5 begin_task: Level: (3) ID = <10346> Status = 0 0 0 0 ok 2011-Dec-19 04:14:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-19 04:14:45 LOG5 log_alfabeam: Parameters: 8.6448888888888895 22.843666666666667 9.634565 2011.9669456802799 18.999933 2011-Dec-19 04:14:45 LOG4 log_alfabeam: ALFABEAM 0 8.644888888888891 22.843666666666675 2011-Dec-19 04:14:45 LOG4 log_alfabeam: ALFABEAM 1 8.652527137138058 22.832884332004703 2011-Dec-19 04:14:45 LOG4 log_alfabeam: ALFABEAM 2 8.648968271827945 22.917690497491872 2011-Dec-19 04:14:45 LOG4 log_alfabeam: ALFABEAM 3 8.641327079492017 22.928848878565422 2011-Dec-19 04:14:45 LOG4 log_alfabeam: ALFABEAM 4 8.637246188994792 22.854122450356012 2011-Dec-19 04:14:45 LOG4 log_alfabeam: ALFABEAM 5 8.640841597751972 22.769093800711744 2011-Dec-19 04:14:45 LOG4 log_alfabeam: ALFABEAM 6 8.648481192460430 22.759013955158064 2011-Dec-19 04:14:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135300030 2011-Dec-19 04:14:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-19 04:14:46 LOG5 begin_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2011-Dec-19 04:14:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-19 04:14:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-19 04:14:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-19 04:14:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 04:14:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-19 04:14:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-19 04:14:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29687.00 2011-Dec-19 04:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.174 (still bad) 2011-Dec-19 04:14:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-19 04:14:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 04:14:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 04:14:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 04:14:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-19 04:14:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 04:14:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-19 04:14:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-19 04:14:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-19 04:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.171 (still bad) 2011-Dec-19 04:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.171 (still bad) 2011-Dec-19 04:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.169 (still bad) 2011-Dec-19 04:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.170 (still bad) 2011-Dec-19 04:14:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-19 04:14:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-19 04:14:57 LOG5 end_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2011-Dec-19 04:14:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-19 04:14:57 LOG5 end_task: Level: (3) ID = <10346> Status = 0 0 0 0 ok 2011-Dec-19 04:14:57 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2011-Dec-19 04:14:57 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-19 04:14:57 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2011-Dec-19 04:14:57 LOG5 antvel: Calling 'antvel 83841.600000 225037.200000 J Topocentric 0' 2011-Dec-19 04:14:57 LOG2 antvel: Precessing RA = 08:38:41.6 Dec = +22:50:37.2 Epoch = 2011.96695 J 2011-Dec-19 04:14:57 LOG2 antvel: Computed apparent RA = 08:39:25.8 Dec = +22:47:52.2 2011-Dec-19 04:14:57 LOG2 antvel: Parameters to Doppler: Topocentric 29697 2011 353 0.0 2011-Dec-19 04:14:57 INFO5 antvel: Computed antenna velocity: +0.0