2011-Dec-17 03:21:12 BEGIN executive: CIMA executive starting ... 2011-Dec-17 03:21:12 NOTE executive: STARTING NEW CIMA SESSION 2011-Dec-17 03:21:12 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2011-Dec-17 03:21:12 INFO4 executive: This is an ON-LINE session 2011-Dec-17 03:21:12 INFO4 executive: This is a LOCAL session 2011-Dec-17 03:21:12 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2011-Dec-17 03:21:12 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'Israel Cabrera' 2011-Dec-17 03:21:12 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20111217' 2011-Dec-17 03:21:13 LOG2 log_preferences: Currently applied preferences: 2011-Dec-17 03:21:13 LOG2 log_preferences: prefs(dailylog) = daily 2011-Dec-17 03:21:13 LOG2 log_preferences: prefs(offlinelog) = skip 2011-Dec-17 03:21:13 LOG2 log_preferences: prefs(datawindow) = ignore 2011-Dec-17 03:21:13 LOG2 log_preferences: prefs(limitwarning) = enabled 2011-Dec-17 03:21:13 LOG2 log_preferences: prefs(wappfailure) = abort 2011-Dec-17 03:21:13 LOG2 log_preferences: prefs(helpstyle) = stay-open 2011-Dec-17 03:21:13 LOG2 log_preferences: prefs(logcolours) = full 2011-Dec-17 03:21:13 LOG2 log_preferences: prefs(displaylevel) = INFO3 2011-Dec-17 03:21:13 LOG2 log_preferences: prefs(loglevel) = LOG5 2011-Dec-17 03:21:13 LOG2 log_preferences: prefs(displayformat) = short 2011-Dec-17 03:21:13 LOG2 log_preferences: prefs(logformat) = new 2011-Dec-17 03:21:13 LOG2 log_preferences: prefs(fontsize) = 4 2011-Dec-17 03:21:13 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2011-Dec-17 03:21:13 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2011-Dec-17 03:21:13 ALERT executive: CIMA executive ready 2011-Dec-17 03:21:14 NOTE frontend: CIMA frontend ready 2011-Dec-17 03:21:14 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:21:15 LOG4 got_cormsg: From DATATAKING: setup 2011-Dec-17 03:21:19 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2011-Dec-17 03:21:19 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2011-Dec-17 03:21:19 LOG4 got_cormsg: From DATATAKING: vw% io 2011-Dec-17 03:21:19 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2011-Dec-17 03:21:19 LOG4 got_cormsg: From DATATAKING: 2011-Dec-17 03:21:19 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2011-Dec-17 03:21:19 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2011-Dec-17 03:21:19 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2011-Dec-17 03:21:19 LOG4 got_cormsg: From DATATAKING: vw% connectall 2011-Dec-17 03:21:19 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2011-Dec-17 03:21:19 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2011-Dec-17 03:21:19 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2011-Dec-17 03:21:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2011-Dec-17 03:21:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2011-Dec-17 03:21:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2011-Dec-17 03:21:20 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2011-Dec-17 03:21:20 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2011-Dec-17 03:21:20 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2011-Dec-17 03:21:20 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:21:20 LOG4 got_cormsg: From DATATAKING: 2011-Dec-17 03:21:20 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:21:24 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2011-Dec-17 03:21:24 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2011-Dec-17 03:21:24 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2011-Dec-17 03:21:24 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2011-Dec-17 03:21:24 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Dec-17 03:21:24 NOTE select_receiver: Starting to select receiver ALFA 2011-Dec-17 03:21:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2011-Dec-17 03:21:24 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2011-Dec-17 03:21:24 LOG3 vw_send: To DATATAKING: acvlbical off 2011-Dec-17 03:21:24 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2011-Dec-17 03:21:24 STOP finish_task: Finishing task 'selecting receiver ALFA' 2011-Dec-17 03:21:24 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Dec-17 03:21:24 DONE finish_task: DONE finished selecting: receiver ALFA 2011-Dec-17 03:21:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-17 03:21:24 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2011-Dec-17 03:21:24 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Dec-17 03:21:24 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2011-Dec-17 03:21:24 LOG4 got_cormsg: From DATATAKING: acvlbical off 2011-Dec-17 03:21:31 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:21:32 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:22:42 INFO5 CIMA-read_in_command_file: Included command file 'command_galfacurpos_cima31.cmd' (at lines 49 - 65) 2011-Dec-17 03:22:42 INFO4 CIMA-load_command_file: Loaded command file '111217morning.cmd' 2011-Dec-17 03:22:45 INFO1 CIMA-run_command_file: Transferring command file '111217morning.cmd' to executive ... 2011-Dec-17 03:22:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD ages_mock.conf} 2011-Dec-17 03:22:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2011-Dec-17 03:22:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {CATALOG AGESFull.cat} 2011-Dec-17 03:22:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 9 {IF LSTSLEW(AGES3193_p3_008) < 085641 THEN} 2011-Dec-17 03:22:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 10 {FIXEDDRIFT az=245.84 alfaangle=-48.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_008 ra=95300.00 dec=234230.00} 2011-Dec-17 03:22:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {ENDIF} 2011-Dec-17 03:22:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 16 {IF LSTSLEW(AGES3193_p3_010) < 092011 THEN} 2011-Dec-17 03:22:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 17 {FIXEDDRIFT az=234.71 alfaangle=-34.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_010 ra=95300.00 dec=233930.00} 2011-Dec-17 03:22:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 20 {ENDIF} 2011-Dec-17 03:22:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 23 {IF LSTSLEW(AGES3193_p3_012) < 094341 THEN} 2011-Dec-17 03:22:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 24 {FIXEDDRIFT az=203.77 alfaangle=-2.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_012 ra=95300.00 dec=233630.00} 2011-Dec-17 03:22:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 27 {ENDIF} 2011-Dec-17 03:22:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 30 {IF LSTSLEW(AGES3193_p3_014) < 100941 THEN} 2011-Dec-17 03:22:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 31 {FIXEDDRIFT az=144.70 alfaangle=51.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_014 ra=95300.00 dec=233330.00} 2011-Dec-17 03:22:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 34 {ENDIF} 2011-Dec-17 03:22:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 37 {IF LSTSLEW(AGES3193_p3_016) < 103311 THEN} 2011-Dec-17 03:22:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 38 {FIXEDDRIFT az=120.61 alfaangle=78.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_016 ra=95300.00 dec=233030.00} 2011-Dec-17 03:22:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 41 {ENDIF} 2011-Dec-17 03:22:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 44 {IF LSTSLEW(AGES3193_p3_018) < 105641 THEN} 2011-Dec-17 03:22:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 45 {FIXEDDRIFT az=111.63 alfaangle=-89.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_018 ra=95300.00 dec=232730.00} 2011-Dec-17 03:22:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 48 {ENDIF} 2011-Dec-17 03:22:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 55 {LOAD togs_cima31.conf} 2011-Dec-17 03:22:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 56 {TRACKCURPOS} 2011-Dec-17 03:22:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 57 {ALFAANGLE 19} 2011-Dec-17 03:22:46 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 61 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2011-Dec-17 03:22:46 COMMAND CIMA-send_to_exec: Sending command to run command file 2011-Dec-17 03:22:46 LOG4 exec_msg: From OBSERVER: run_command_file 111217morning.cmd 1 1 25 2011-Dec-17 03:22:46 LOG4 run_command_file: Calling 'run_command_file 111217morning.cmd 1 1 25' 2011-Dec-17 03:22:46 BEGIN begin_task: Starting task 'running command file '111217morning.cmd'' 2011-Dec-17 03:22:46 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2011-Dec-17 03:22:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '111217morning.cmd' ...} 2011-Dec-17 03:22:46 NOTE run_command_file: Starting execution of command file '111217morning.cmd' from line 1 2011-Dec-17 03:22:46 COMMAND run_command_line: EXECUTING command 4: 'LOAD ages_mock.conf' 2011-Dec-17 03:22:46 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2011-Dec-17 03:22:46 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-17 03:22:46 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2011-Dec-17 03:22:46 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock.conf' 2011-Dec-17 03:22:46 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2011-Dec-17 03:22:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled1) "1" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled2) "0" 2011-Dec-17 03:22:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards1) "both" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards2) "both" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode1) "spectra" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode2) "spectra" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg1) "2-pol" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg2) "2-pol" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits1) "32" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits2) "32" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor1) "1" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor2) "1" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset1) "0.0" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset2) "0.0" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags1) "8192" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags2) "8192" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs1) "1000.0" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs2) "1000.0" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad1) "1" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad2) "0" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors1) "13" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors2) "0" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors1) "0" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors2) "0" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors1) "0" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors2) "0" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors1) "0" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors2) "0" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype1) "fits" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype2) "fits" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2011-Dec-17 03:22:49 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-17 03:22:49 BEGIN begin_task: Starting task 'configuring IF/LO path' 2011-Dec-17 03:22:49 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Dec-17 03:22:49 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2011-Dec-17 03:22:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2011-Dec-17 03:22:49 INFO1 config_iflo: Selecting receiver ALFA 2011-Dec-17 03:22:49 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2011-Dec-17 03:22:49 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2011-Dec-17 03:22:49 START begin_task: Starting task 'selecting receiver ALFA' 2011-Dec-17 03:22:49 LOG5 begin_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Dec-17 03:22:49 NOTE select_receiver: Starting to select receiver ALFA 2011-Dec-17 03:22:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2011-Dec-17 03:22:49 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2011-Dec-17 03:22:49 LOG3 vw_send: To DATATAKING: acvlbical off 2011-Dec-17 03:22:49 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2011-Dec-17 03:22:50 STOP finish_task: Finishing task 'selecting receiver ALFA' 2011-Dec-17 03:22:50 LOG5 finish_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Dec-17 03:22:50 INFO2 finish_task: DONE finished selecting: receiver ALFA 2011-Dec-17 03:22:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 03:22:50 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2011-Dec-17 03:22:50 LOG5 end_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Dec-17 03:22:50 START begin_task: Starting task 'waiting for receiver ALFA' 2011-Dec-17 03:22:50 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2011-Dec-17 03:22:50 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2011-Dec-17 03:22:50 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2011-Dec-17 03:22:50 INFO1 config_iflo: Configuring rest of the IF/LO path 2011-Dec-17 03:22:50 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2011-Dec-17 03:22:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-17 03:22:50 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-17 03:22:50 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-17 03:22:50 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2011-Dec-17 03:22:50 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-17 03:22:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-17 03:22:50 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2011-Dec-17 03:22:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-17 03:22:50 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-17 03:22:50 LOG3 vw_send: To DATATAKING: alfafb 1 2011-Dec-17 03:22:50 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2011-Dec-17 03:22:50 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2011-Dec-17 03:22:50 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2011-Dec-17 03:22:50 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2011-Dec-17 03:22:50 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2011-Dec-17 03:22:50 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2011-Dec-17 03:22:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2011-Dec-17 03:22:50 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2011-Dec-17 03:22:50 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2011-Dec-17 03:22:50 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2011-Dec-17 03:22:50 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2011-Dec-17 03:22:50 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2011-Dec-17 03:22:50 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2011-Dec-17 03:22:50 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2011-Dec-17 03:22:50 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2011-Dec-17 03:22:50 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2011-Dec-17 03:22:50 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2011-Dec-17 03:22:50 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2011-Dec-17 03:22:50 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2011-Dec-17 03:22:50 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2011-Dec-17 03:22:50 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2011-Dec-17 03:22:50 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2011-Dec-17 03:22:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 03:22:50 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2011-Dec-17 03:22:50 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2011-Dec-17 03:22:50 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2011-Dec-17 03:22:50 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2011-Dec-17 03:22:50 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2011-Dec-17 03:22:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2011-Dec-17 03:22:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 03:22:50 START begin_task: Starting task 'waiting on configuring IF/LO path' 2011-Dec-17 03:22:50 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2011-Dec-17 03:22:50 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2011-Dec-17 03:22:50 LOG4 got_cormsg: From DATATAKING: acvlbical off 2011-Dec-17 03:22:50 LOG4 got_cormsg: From DATATAKING: alfafb 1 2011-Dec-17 03:22:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2011-Dec-17 03:22:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2011-Dec-17 03:22:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2011-Dec-17 03:22:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2011-Dec-17 03:22:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2011-Dec-17 03:22:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2011-Dec-17 03:22:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2011-Dec-17 03:22:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2011-Dec-17 03:22:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2011-Dec-17 03:22:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2011-Dec-17 03:22:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2011-Dec-17 03:22:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2011-Dec-17 03:22:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2011-Dec-17 03:22:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2011-Dec-17 03:22:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 03:22:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2011-Dec-17 03:22:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2011-Dec-17 03:22:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2011-Dec-17 03:22:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2011-Dec-17 03:22:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 03:22:57 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:22:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:22:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:22:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:22:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:22:59 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:23:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:23:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:23:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:23:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:23:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:23:05 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:23:05 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:23:05 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:23:05 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:23:05 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:23:06 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:23:06 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:23:06 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:23:06 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:23:06 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:23:06 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:23:06 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-17 03:23:06 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2011-Dec-17 03:23:06 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2011-Dec-17 03:23:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2011-Dec-17 03:23:06 STOP finish_task: Finishing task 'configuring IF/LO path' 2011-Dec-17 03:23:06 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Dec-17 03:23:06 DONE finish_task: DONE finished configuration: IF/LO path 2011-Dec-17 03:23:06 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-17 03:23:07 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2011-Dec-17 03:23:07 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Dec-17 03:23:07 BEGIN begin_task: Starting task 'configuring WAPPs' 2011-Dec-17 03:23:07 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2011-Dec-17 03:23:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2011-Dec-17 03:23:07 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2011-Dec-17 03:23:07 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Dec-17 03:23:07 START begin_task: Starting task 'selecting calibration port' 2011-Dec-17 03:23:07 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2011-Dec-17 03:23:07 LOG3 vw_send: To DATATAKING: calport 3 2011-Dec-17 03:23:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Dec-17 03:23:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 03:23:07 START begin_task: Starting task 'waiting on calport' 2011-Dec-17 03:23:07 LOG5 begin_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2011-Dec-17 03:23:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:23:07 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Dec-17 03:23:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 03:23:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:23:07 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-17 03:23:07 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Dec-17 03:23:07 LOG5 end_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2011-Dec-17 03:23:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Dec-17 03:23:07 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Dec-17 03:23:07 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2011-Dec-17 03:23:07 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-17 03:23:07 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-17 03:23:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-17 03:23:07 LOG5 begin_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2011-Dec-17 03:23:07 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-17 03:23:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:23:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-17 03:23:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-17 03:23:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-17 03:23:07 LOG5 end_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2011-Dec-17 03:23:07 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2011-Dec-17 03:23:07 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2011-Dec-17 03:23:07 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2011-Dec-17 03:23:07 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2011-Dec-17 03:23:07 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2011-Dec-17 03:23:07 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2011-Dec-17 03:23:07 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2011-Dec-17 03:23:07 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2011-Dec-17 03:23:07 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel Cabrera 2011-Dec-17 03:23:07 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel Cabrera 2011-Dec-17 03:23:07 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel Cabrera 2011-Dec-17 03:23:07 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel Cabrera 2011-Dec-17 03:23:07 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Dec-17 03:23:07 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Dec-17 03:23:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-17 03:23:07 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2011-Dec-17 03:23:07 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-17 03:23:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-17 03:23:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-17 03:23:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-17 03:23:07 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2011-Dec-17 03:23:07 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel Cabrera 2011-Dec-17 03:23:07 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel Cabrera 2011-Dec-17 03:23:08 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel Cabrera 2011-Dec-17 03:23:08 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel Cabrera 2011-Dec-17 03:23:08 STOP finish_task: Finishing task 'configuring WAPPs' 2011-Dec-17 03:23:08 LOG5 finish_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2011-Dec-17 03:23:08 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2011-Dec-17 03:23:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-17 03:23:08 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2011-Dec-17 03:23:08 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2011-Dec-17 03:23:08 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2011-Dec-17 03:23:08 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2011-Dec-17 03:23:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2011-Dec-17 03:23:08 INFO1 config_mock: Starting to configure the Mock spectrometer 2011-Dec-17 03:23:08 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Dec-17 03:23:08 START begin_task: Starting task 'selecting calibration port' 2011-Dec-17 03:23:08 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2011-Dec-17 03:23:08 LOG3 vw_send: To DATATAKING: calport 3 2011-Dec-17 03:23:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Dec-17 03:23:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 03:23:08 START begin_task: Starting task 'waiting on calport' 2011-Dec-17 03:23:08 LOG5 begin_task: Level: (4) ID = <10015> Status = 0 0 0 0 ok 2011-Dec-17 03:23:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2011-Dec-17 03:23:08 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Dec-17 03:23:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2011-Dec-17 03:23:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2011-Dec-17 03:23:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 03:23:08 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:23:08 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-17 03:23:08 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Dec-17 03:23:08 LOG5 end_task: Level: (4) ID = <10015> Status = 0 0 0 0 ok 2011-Dec-17 03:23:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Dec-17 03:23:08 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Dec-17 03:23:08 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2011-Dec-17 03:23:08 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-17 03:23:08 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-17 03:23:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-17 03:23:08 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2011-Dec-17 03:23:08 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-17 03:23:08 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:23:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2011-Dec-17 03:23:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-17 03:23:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-17 03:23:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-17 03:23:09 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2011-Dec-17 03:23:09 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Dec-17 03:23:09 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Dec-17 03:23:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-17 03:23:09 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2011-Dec-17 03:23:09 NOTE WAPPDATA-new_file: New FITS file: wapp.20111217.a2048.0000.fits 2011-Dec-17 03:23:09 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-17 03:23:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-17 03:23:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-17 03:23:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-17 03:23:09 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2011-Dec-17 03:23:09 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2011-Dec-17 03:23:09 LOG3 socket_wait: To MOCK: NOP 2011-Dec-17 03:23:09 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2011-Dec-17 03:23:09 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2011-Dec-17 03:23:09 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20111217.a2048.0000.fits} 2011-Dec-17 03:23:09 ALERT got_mock_message: Mock spectrometer restarting 2011-Dec-17 03:23:09 LOG4 from_mock: From MOCK: nop ok 2011-Dec-17 03:23:09 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2011-Dec-17 03:23:09 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2011-Dec-17 03:23:09 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2011-Dec-17 03:23:09 LOG2 config_mock: Mock spectrometer configuration group 1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2011-Dec-17 03:23:09 LOG2 config_mock: Mock spectrometer configuration group 1 (0): datatype=AB 2011-Dec-17 03:23:09 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bits=32 2011-Dec-17 03:23:09 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bwmhz=172.032 2011-Dec-17 03:23:09 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevif1hz=250000000 2011-Dec-17 03:23:09 LOG2 config_mock: Mock spectrometer configuration group 1 (0): digfreqoffhz=0.0 2011-Dec-17 03:23:09 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fftlen=8192 2011-Dec-17 03:23:09 LOG2 config_mock: Mock spectrometer configuration group 1 (0): dumptmsec=1.0 2011-Dec-17 03:23:09 LOG2 config_mock: Mock spectrometer configuration group 1 (0): blankatod=1 2011-Dec-17 03:23:09 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskadc=13 2011-Dec-17 03:23:09 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskpfb=0 2011-Dec-17 03:23:09 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskacc=0 2011-Dec-17 03:23:09 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskash=0 2011-Dec-17 03:23:09 LOG2 config_mock: Mock spectrometer configuration group 1 (0): adcclkhz=172032000 2011-Dec-17 03:23:09 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevlohz=175000000 325000000 2011-Dec-17 03:23:09 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fileprefix=a2048 2011-Dec-17 03:23:09 LOG2 config_mock: Mock spectrometer configuration group 1 (0): maxfilesizemb=2048 2011-Dec-17 03:23:09 LOG2 config_mock: Mock spectrometer configuration group 1 (0): calctl=c0 2011-Dec-17 03:23:09 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group 1' using string 'conf' 2011-Dec-17 03:23:09 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bits=32:bwmhz=172.032:pdevif1hz=250000000:digfreqoffhz=0.0:fftlen=8192:dumptmsec=1.0:blankatod=1:emaskadc=13:emaskpfb=0:emaskacc=0:emaskash=0:adcclkhz=172032000:pdevlohz=175000000 325000000:fileprefix=a2048:maxfilesizemb=2048:calctl=c0 2011-Dec-17 03:23:09 START begin_task: Starting task 'waiting on configure Mock spectrometer group 1' 2011-Dec-17 03:23:09 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2011-Dec-17 03:23:09 LOG4 from_mock: From MOCK: confok 2011-Dec-17 03:23:09 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group 1' with status 'OK' 2011-Dec-17 03:23:09 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2011-Dec-17 03:23:09 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group 1' 2011-Dec-17 03:23:09 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group 2' using string 'conf' 2011-Dec-17 03:23:09 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2011-Dec-17 03:23:09 START begin_task: Starting task 'waiting on disable Mock spectrometer group 2' 2011-Dec-17 03:23:09 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2011-Dec-17 03:23:09 LOG4 from_mock: From MOCK: confok 2011-Dec-17 03:23:09 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group 2' with status 'OK' 2011-Dec-17 03:23:09 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2011-Dec-17 03:23:09 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group 2' 2011-Dec-17 03:23:09 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2011-Dec-17 03:23:09 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2011-Dec-17 03:23:09 DONE finish_task: DONE finished configuring: the Mock spectrometer 2011-Dec-17 03:23:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-17 03:23:10 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2011-Dec-17 03:23:10 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2011-Dec-17 03:23:10 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2011-Dec-17 03:23:10 COMMAND run_command_line: EXECUTING command 5: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2011-Dec-17 03:23:10 COMMAND run_command_line: EXECUTING command 6: 'CATALOG AGESFull.cat' 2011-Dec-17 03:23:10 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2011-Dec-17 03:23:10 COMMAND run_command_line: EXECUTING command 9: 'IF LSTSLEW(AGES3193_p3_008) < 085641 THEN' 2011-Dec-17 03:23:10 LOG3 is_if_valid: Current source data: up 250.0 18.3 UP - - 156 3.0 2011-Dec-17 03:23:10 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_008) < 085641 2011-Dec-17 03:23:10 INFO5 is_if_valid: Condition parsed as: 8.6907910000000008 < 8.9447222222222216 2011-Dec-17 03:23:10 COMMAND run_command_line: EXECUTING command 10: 'FIXEDDRIFT az=245.84 alfaangle=-48.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_008 ra=95300.00 dec=234230.00' 2011-Dec-17 03:23:10 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-17 03:23:11 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-17 03:23:11 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 245.84 -48.9 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_008 95300.00 234230.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-17 03:23:11 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-17 03:23:11 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2011-Dec-17 03:23:11 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'Strip119' 2011-Dec-17 03:23:11 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-17 03:23:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_008} 2011-Dec-17 03:23:11 INFO3 fixed_driftmap: Sending telescope to Az = 245.84 and ZA = 14.31 2011-Dec-17 03:23:11 LOG3 track_source: Calling 'track_source AGES3193_p3_008 245.84 14.3066877881 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-17 03:23:11 START begin_task: Starting task 'sending tracking commands' 2011-Dec-17 03:23:11 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2011-Dec-17 03:23:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_008} INFO {Slewing to source 'AGES3193_p3_008' ...} 2011-Dec-17 03:23:11 INFO1 track_source: Starting to track AGES3193_p3_008 2011-Dec-17 03:23:11 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_008" 2011-Dec-17 03:23:11 LOG3 vw_send: To DATATAKING: set ra 245.84 2011-Dec-17 03:23:11 LOG3 vw_send: To DATATAKING: set dec 14.3066877881 2011-Dec-17 03:23:11 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-17 03:23:11 LOG3 vw_send: To DATATAKING: pnt tr 245.84 14.3066877881 -CF 2011-Dec-17 03:23:11 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 03:23:11 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-17 03:23:11 LOG5 finish_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2011-Dec-17 03:23:11 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-17 03:23:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 03:23:11 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-17 03:23:11 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2011-Dec-17 03:23:11 START begin_task: Starting task 'rotate ALFA to -48.9 degrees' 2011-Dec-17 03:23:11 LOG5 begin_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2011-Dec-17 03:23:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -48.9 degrees ...} 2011-Dec-17 03:23:11 INFO2 rotate_alfa: ALFA commanded to -48.9 degrees 2011-Dec-17 03:23:11 LOG3 sock_errsend: To ALFAMOTOR: POSITION -48.9 REPLY 2011-Dec-17 03:23:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-17 03:23:11 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-17 03:23:11 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2011-Dec-17 03:23:11 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_008" 2011-Dec-17 03:23:11 LOG4 got_cormsg: From DATATAKING: set ra 245.84 2011-Dec-17 03:23:11 LOG4 got_cormsg: From DATATAKING: set dec 14.3066877881 2011-Dec-17 03:23:11 LOG4 got_cormsg: From DATATAKING: vw% 245.84 2011-Dec-17 03:23:11 LOG4 got_cormsg: From DATATAKING: vw% 14.3066877881 2011-Dec-17 03:23:11 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:23:11 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-17 03:23:11 LOG4 got_cormsg: From DATATAKING: pnt tr 245.84 14.3066877881 -CF 2011-Dec-17 03:23:11 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 03:23:11 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-17 03:23:11 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:23:50 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-17 03:23:50 INFO3 alfa_motor: ALFA rotator in-position -48.90 degrees 2011-Dec-17 03:23:50 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-17 03:23:50 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2011-Dec-17 03:23:50 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-17 03:23:50 STOP finish_task: Finishing task 'rotate ALFA to -48.9 degrees' 2011-Dec-17 03:23:50 LOG5 finish_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2011-Dec-17 03:23:50 INFO2 finish_task: DONE finished configuration: rotating ALFA to -48.9 degrees 2011-Dec-17 03:23:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 03:23:50 STOP end_task: Finishing task 'rotate ALFA to -48.9 degrees' with status 'OK' 2011-Dec-17 03:23:50 LOG5 end_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2011-Dec-17 03:23:50 START begin_task: Starting task 'waiting on telescope' 2011-Dec-17 03:23:50 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2011-Dec-17 03:23:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-17 03:23:50 LOG3 waittrk: Start waittrk 5 2011-Dec-17 03:23:50 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-17 03:23:50 LOG5 begin_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2011-Dec-17 03:23:55 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-17 03:23:55 LOG5 end_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2011-Dec-17 03:23:55 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-17 03:23:55 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2011-Dec-17 03:25:03 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-17 03:25:03 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2011-Dec-17 03:25:03 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-17 03:25:03 INFO2 waittrk: Now tracking AGES3193_p3_008 2011-Dec-17 03:25:03 LOG4 waittrk: Current telescope position: Az = 245.40 ZA = 14.32 2011-Dec-17 03:25:03 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-17 03:25:03 LOG5 finish_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2011-Dec-17 03:25:03 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-17 03:25:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 03:25:03 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-17 03:25:03 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2011-Dec-17 03:25:03 START begin_task: Starting task 'selecting calibration type' 2011-Dec-17 03:25:03 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2011-Dec-17 03:25:03 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-17 03:25:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-17 03:25:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 03:25:03 START begin_task: Starting task 'waiting on setcal' 2011-Dec-17 03:25:03 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2011-Dec-17 03:25:03 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-17 03:25:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 03:25:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:25:03 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-17 03:25:03 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-17 03:25:03 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2011-Dec-17 03:25:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-17 03:25:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-17 03:25:03 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-17 03:25:03 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-17 03:25:03 LOG5 begin_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2011-Dec-17 03:25:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:25:03 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-17 03:25:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-17 03:25:03 LOG5 end_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2011-Dec-17 03:25:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-17 03:25:03 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-17 03:25:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-17 03:25:03 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-17 03:25:03 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-17 03:25:03 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2011-Dec-17 03:25:03 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-17 03:25:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-17 03:25:03 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2011-Dec-17 03:25:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-17 03:25:03 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-17 03:25:03 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-17 03:25:03 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2011-Dec-17 03:25:03 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Dec-17 03:25:03 INFO2 astwait: Waiting for 919 seconds from 07:25:03 to 07:40:22 UTC ... 2011-Dec-17 03:25:03 LOG4 send_obs_status: To obs_status: <1> TASKTIME 919 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-17 03:25:03 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Dec-17 03:25:03 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2011-Dec-17 03:40:22 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Dec-17 03:40:22 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2011-Dec-17 03:40:22 INFO3 astwait: Finished waiting 2011-Dec-17 03:40:22 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-17 03:40:22 LOG5 dopset_later: Calling 'dopset_later 60.620285884757536' 2011-Dec-17 03:40:22 INFO3 dopset_later: Setting Doppler correction for 03:41:22 (60.6 seconds from now) 2011-Dec-17 03:40:22 LOG5 antvel: Calling 'antvel 245.840000 14.306688 F Heliocentric 60.620285884757536' 2011-Dec-17 03:40:22 LOG2 antvel: Transforming current Az = 245.84 ZA = 14.31 to apparent RA = 09:53:42.0 Dec = +23:38:52.0 2011-Dec-17 03:40:22 LOG2 antvel: Parameters to Doppler: Heliocentric 27682 2011 351 0.0 2011-Dec-17 03:40:22 INFO5 antvel: Computed antenna velocity: -25.12828 km/s 2011-Dec-17 03:40:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-25.128279697899998 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-17 03:40:22 INFO4 dopset_gen: New sky frequencies: 1381.359213 1381.359213 1381.359213 1381.359213 1381.359213 1381.359213 1381.359213 1381.359213 1381.359213 2011-Dec-17 03:40:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.359213 sky0=1381.359213 sky1=1381.359213 sky2=1381.359213 sky3=1381.359213 sky4=1381.359213 sky5=1381.359213 sky6=1381.359213 sky7=1381.359213 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-17 03:40:22 LOG2 dopset_gen: Result from 'sky2syn': 1631.359213 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-17 03:40:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631359213.0} 2011-Dec-17 03:40:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 03:40:22 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-17 03:40:22 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-17 03:40:22 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.9 Dec = +23:42:15.5 2011-Dec-17 03:40:22 LOG3 track_source: Calling 'track_source AGES3193_p3_008 095203.9 234215.5 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-17 03:40:22 START begin_task: Starting task 'sending tracking commands' 2011-Dec-17 03:40:22 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2011-Dec-17 03:40:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_008} INFO {Slewing to source 'AGES3193_p3_008' ...} 2011-Dec-17 03:40:22 INFO1 track_source: Starting to track AGES3193_p3_008 2011-Dec-17 03:40:22 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_008" 2011-Dec-17 03:40:22 LOG3 vw_send: To DATATAKING: set ra 095203.9 2011-Dec-17 03:40:22 LOG3 vw_send: To DATATAKING: set dec 234215.5 2011-Dec-17 03:40:22 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-17 03:40:22 LOG3 vw_send: To DATATAKING: pnt tr 095203.9 234215.5 -CJ 2011-Dec-17 03:40:22 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 03:40:22 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-17 03:40:22 LOG5 finish_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2011-Dec-17 03:40:22 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-17 03:40:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 03:40:22 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-17 03:40:22 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2011-Dec-17 03:40:22 START begin_task: Starting task 'waiting on telescope' 2011-Dec-17 03:40:22 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2011-Dec-17 03:40:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-17 03:40:22 LOG3 waittrk: Start waittrk 5 2011-Dec-17 03:40:22 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-17 03:40:22 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2011-Dec-17 03:40:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631359213.0} 2011-Dec-17 03:40:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 03:40:22 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_008" 2011-Dec-17 03:40:22 LOG4 got_cormsg: From DATATAKING: set ra 095203.9 2011-Dec-17 03:40:22 LOG4 got_cormsg: From DATATAKING: set dec 234215.5 2011-Dec-17 03:40:22 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-17 03:40:22 LOG4 got_cormsg: From DATATAKING: vw% 095203.9 2011-Dec-17 03:40:22 LOG4 got_cormsg: From DATATAKING: vw% 234215.5 2011-Dec-17 03:40:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:40:22 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-17 03:40:22 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.9 234215.5 -CJ 2011-Dec-17 03:40:22 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 03:40:22 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-17 03:40:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:40:27 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-17 03:40:27 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2011-Dec-17 03:40:27 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-17 03:40:27 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2011-Dec-17 03:40:29 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-17 03:40:29 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2011-Dec-17 03:40:29 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-17 03:40:29 INFO2 waittrk: Now tracking AGES3193_p3_008 2011-Dec-17 03:40:29 LOG4 waittrk: Current telescope position: Az = 245.39 ZA = 14.30 2011-Dec-17 03:40:29 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-17 03:40:29 LOG5 finish_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2011-Dec-17 03:40:29 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-17 03:40:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 03:40:29 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-17 03:40:29 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2011-Dec-17 03:40:29 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-17 03:40:29 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2011-Dec-17 03:40:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-17 03:40:29 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-17 03:40:29 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-17 03:40:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-17 03:40:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 03:40:29 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-17 03:40:29 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2011-Dec-17 03:40:29 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-17 03:40:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 03:40:33 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:40:33 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-17 03:40:33 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-17 03:40:33 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2011-Dec-17 03:40:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-17 03:40:33 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-17 03:40:33 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2011-Dec-17 03:40:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-17 03:40:33 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-17 03:40:33 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-17 03:40:33 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-17 03:40:33 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-17 03:40:33 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-17 03:40:33 LOG5 begin_task: Level: (5) ID = <10040> Status = 0 0 0 0 ok 2011-Dec-17 03:40:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-17 03:40:33 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:40:33 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 8 6 dB 2011-Dec-17 03:40:33 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 3 dB 2011-Dec-17 03:40:33 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2011-Dec-17 03:40:33 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 3 3 dB 2011-Dec-17 03:40:33 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-17 03:40:33 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-17 03:40:33 LOG5 end_task: Level: (5) ID = <10040> Status = 0 0 0 0 ok 2011-Dec-17 03:40:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.903 1.073 ALFA beam 1: 0.922 0.929 2011-Dec-17 03:40:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.917 0.995 ALFA beam 3: 1.069 0.904 2011-Dec-17 03:40:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.837 0.898 ALFA beam 5: 0.972 1.117 2011-Dec-17 03:40:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.929 0.014 ALFA beam 7: 1.010 0.014 2011-Dec-17 03:40:33 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-17 03:40:33 LOG5 finish_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2011-Dec-17 03:40:33 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-17 03:40:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 03:40:33 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-17 03:40:33 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2011-Dec-17 03:40:33 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-17 03:40:33 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2011-Dec-17 03:40:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-17 03:40:33 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-17 03:40:33 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-17 03:40:33 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-17 03:40:33 LOG5 begin_task: Level: (5) ID = <10042> Status = 0 0 0 0 ok 2011-Dec-17 03:40:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 03:40:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 1.073 0.922 0.929 2011-Dec-17 03:40:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.917 0.995 1.069 0.904 2011-Dec-17 03:40:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.837 0.898 0.972 1.117 2011-Dec-17 03:40:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.014 1.010 0.014 2011-Dec-17 03:40:39 INFO3 from_mock: From MOCK: b0s0g0 rms:A 32.0 28.2 B 30.3 30.3 mn:A -0.1 -0.1 B -0.5 -0.4 gn: 11 11 2011-Dec-17 03:40:39 INFO3 from_mock: From MOCK: b0s1g0 rms:A 32.2 30.8 B 28.1 29.8 mn:A 0.0 -0.4 B -0.6 0.1 gn: 12 11 2011-Dec-17 03:40:39 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.9 28.9 B 33.2 29.1 mn:A 0.5 0.7 B 0.1 -0.0 gn: 7 11 2011-Dec-17 03:40:39 INFO3 from_mock: From MOCK: b1s1g0 rms:A 30.3 27.9 B 31.5 31.5 mn:A -0.3 -0.4 B 0.5 0.2 gn: 8 10 2011-Dec-17 03:40:39 INFO3 from_mock: From MOCK: b2s0g0 rms:A 28.8 27.9 B 28.2 29.4 mn:A -0.0 -0.4 B 0.3 -0.0 gn: 10 11 2011-Dec-17 03:40:39 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.5 29.8 B 32.8 30.5 mn:A 0.2 -0.2 B -0.1 0.1 gn: 11 12 2011-Dec-17 03:40:39 INFO3 from_mock: From MOCK: b3s0g0 rms:A 29.2 29.0 B 31.3 27.9 mn:A 0.4 -0.3 B -0.0 -0.2 gn: 12 12 2011-Dec-17 03:40:39 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.5 29.8 B 29.7 31.0 mn:A -0.3 0.3 B 0.1 0.1 gn: 12 12 2011-Dec-17 03:40:39 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.6 29.6 B 28.3 28.4 mn:A -0.3 -0.3 B -0.3 0.0 gn: 13 11 2011-Dec-17 03:40:39 INFO3 from_mock: From MOCK: b4s1g0 rms:A 32.5 29.5 B 30.8 29.6 mn:A -0.1 -0.1 B -0.4 0.1 gn: 16 13 2011-Dec-17 03:40:39 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.8 28.7 B 30.9 30.9 mn:A 0.5 0.4 B -0.1 0.3 gn: 12 11 2011-Dec-17 03:40:39 INFO3 from_mock: From MOCK: b5s1g0 rms:A 29.8 29.6 B 31.1 30.9 mn:A -0.3 0.2 B -0.1 0.1 gn: 12 11 2011-Dec-17 03:40:39 INFO3 from_mock: From MOCK: b6s0g0 rms:A 30.1 27.5 B 14.1 14.5 mn:A -0.5 0.2 B 0.5 -0.4 gn: 12 31 2011-Dec-17 03:40:39 INFO3 from_mock: From MOCK: b6s1g0 rms:A 30.4 27.6 B 11.1 10.8 mn:A 0.6 0.5 B 0.0 0.1 gn: 13 31 2011-Dec-17 03:40:39 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-17 03:40:39 LOG5 end_task: Level: (5) ID = <10042> Status = 0 0 0 0 ok 2011-Dec-17 03:40:39 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-17 03:40:39 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-17 03:40:39 LOG5 finish_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2011-Dec-17 03:40:39 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-17 03:40:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 03:40:39 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-17 03:40:39 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2011-Dec-17 03:40:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-17 03:40:39 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-17 03:40:39 LOG5 finish_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2011-Dec-17 03:40:39 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-17 03:40:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 03:40:39 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-17 03:40:39 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2011-Dec-17 03:40:39 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel Cabrera 2011-Dec-17 03:40:39 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel Cabrera 2011-Dec-17 03:40:39 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel Cabrera 2011-Dec-17 03:40:39 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel Cabrera 2011-Dec-17 03:40:39 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20111217.a2048.0000.fits' is empty! 2011-Dec-17 03:40:39 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-17 03:40:39 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-17 03:40:39 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2011-Dec-17 03:40:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-17 03:40:39 START begin_task: Starting task 'selecting calibration type' 2011-Dec-17 03:40:39 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2011-Dec-17 03:40:39 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-17 03:40:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-17 03:40:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 03:40:39 START begin_task: Starting task 'waiting on setcal' 2011-Dec-17 03:40:39 LOG5 begin_task: Level: (5) ID = <10045> Status = 0 0 0 0 ok 2011-Dec-17 03:40:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2011-Dec-17 03:40:39 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-17 03:40:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 03:40:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:40:40 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-17 03:40:40 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-17 03:40:40 LOG5 end_task: Level: (5) ID = <10045> Status = 0 0 0 0 ok 2011-Dec-17 03:40:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-17 03:40:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-17 03:40:40 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-17 03:40:40 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-17 03:40:40 LOG5 begin_task: Level: (5) ID = <10046> Status = 0 0 0 0 ok 2011-Dec-17 03:40:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:40:40 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-17 03:40:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-17 03:40:40 LOG5 end_task: Level: (5) ID = <10046> Status = 0 0 0 0 ok 2011-Dec-17 03:40:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-17 03:40:40 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-17 03:40:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-17 03:40:40 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-17 03:40:40 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-17 03:40:40 LOG5 begin_task: Level: (5) ID = <10047> Status = 0 0 0 0 ok 2011-Dec-17 03:40:40 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-17 03:40:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-17 03:40:40 LOG5 end_task: Level: (5) ID = <10047> Status = 0 0 0 0 ok 2011-Dec-17 03:40:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-17 03:40:40 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-17 03:40:40 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-17 03:40:40 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2011-Dec-17 03:40:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-17 03:40:40 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-17 03:40:40 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-17 03:40:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-17 03:40:40 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2011-Dec-17 03:40:40 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-17 03:40:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-17 03:40:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-17 03:40:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-17 03:40:40 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2011-Dec-17 03:40:40 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-17 03:40:40 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-17 03:40:40 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2011-Dec-17 03:40:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-17 03:40:40 LOG5 log_alfabeam: Parameters: 9.8677499999999991 23.704305555555553 8.933535 2011.9614051765661 -48.900043 2011-Dec-17 03:40:40 LOG4 log_alfabeam: ALFABEAM 0 9.867749999999999 23.704305555555560 2011-Dec-17 03:40:40 LOG4 log_alfabeam: ALFABEAM 1 9.868459565697419 23.612869226139992 2011-Dec-17 03:40:40 LOG4 log_alfabeam: ALFABEAM 2 9.874712265131198 23.673553806474224 2011-Dec-17 03:40:40 LOG4 log_alfabeam: ALFABEAM 3 9.873978394769372 23.765564491815233 2011-Dec-17 03:40:40 LOG4 log_alfabeam: ALFABEAM 4 9.866995327402938 23.795798701366628 2011-Dec-17 03:40:40 LOG4 log_alfabeam: ALFABEAM 5 9.860783300745927 23.734278610699306 2011-Dec-17 03:40:40 LOG4 log_alfabeam: ALFABEAM 6 9.861513479013297 23.643358631288645 2011-Dec-17 03:40:40 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-17 03:40:40 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-17 03:40:40 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Dec-17 03:40:40 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_008 2011-Dec-17 03:40:40 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-17 03:40:40 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-17 03:40:40 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-17 03:40:40 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-17 03:40:40 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-17 03:40:40 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-17 03:40:40 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-17 03:40:40 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-17 03:40:40 LOG3 take_mock_data: PSET configuration: patternid=135100001 2011-Dec-17 03:40:40 LOG3 take_mock_data: PSET configuration: scanid=135100001 2011-Dec-17 03:40:40 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-17 03:40:40 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-17 03:40:40 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-17 03:40:40 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456359213.0 2011-Dec-17 03:40:40 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306359213.0 2011-Dec-17 03:40:40 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-17 03:40:40 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-17 03:40:40 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGES3193_p3_008:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=135100001:scanid=135100001:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456359213.0:topobfreqhz=1306359213.0:filetype=1 2011-Dec-17 03:40:40 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-17 03:40:40 LOG5 begin_task: Level: (5) ID = <10050> Status = 0 0 0 0 ok 2011-Dec-17 03:40:40 LOG4 from_mock: From MOCK: psetok 2011-Dec-17 03:40:40 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-17 03:40:40 LOG5 end_task: Level: (5) ID = <10050> Status = 0 0 0 0 ok 2011-Dec-17 03:40:40 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-17 03:40:40 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-17 03:40:40 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-17 03:40:40 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-17 03:40:40 LOG5 begin_task: Level: (5) ID = <10051> Status = 0 0 0 0 ok 2011-Dec-17 03:40:40 LOG4 from_mock: From MOCK: starok 2011-Dec-17 03:40:40 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-17 03:40:40 LOG5 end_task: Level: (5) ID = <10051> Status = 0 0 0 0 ok 2011-Dec-17 03:40:40 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-17 03:40:40 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135100001 2011-Dec-17 03:40:41 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-17 03:40:41 LOG5 begin_task: Level: (5) ID = <10052> Status = 0 0 0 0 ok 2011-Dec-17 03:40:41 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-17 03:40:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 03:40:41 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-17 03:40:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-17 03:40:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27642.00 2011-Dec-17 03:40:43 INFO2 got_mock_message: Mock spectrometer start file number is 00000 2011-Dec-17 03:40:43 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-17 03:40:43 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-17 03:40:43 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-17 03:40:43 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-17 03:40:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-17 03:40:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-17 03:40:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-17 03:40:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-17 03:40:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-17 03:40:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-17 03:40:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-17 03:40:43 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-17 03:40:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 03:40:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 03:40:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 03:40:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 03:40:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 03:40:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 03:40:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 03:40:46 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:40:46.01 2011-Dec-17 03:40:46 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324107646.01 Sat Dec 17 03:40:46 2011 2011-Dec-17 03:40:46 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-17 03:40:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.359213 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 03:40:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.359213 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 03:40:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.359213 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 03:40:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.359213 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 03:40:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.359213 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 03:40:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.359213 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 03:40:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.359213 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 03:40:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.359213 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 03:40:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.359213 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 03:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.403 (still bad) 2011-Dec-17 03:40:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 03:40:51 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-17 03:40:52 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-17 03:40:52 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-17 03:40:52 LOG5 end_task: Level: (5) ID = <10052> Status = 0 0 0 0 ok 2011-Dec-17 03:40:52 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-17 03:40:52 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2011-Dec-17 03:40:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-17 03:40:52 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-17 03:40:52 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-17 03:40:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-17 03:40:52 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2011-Dec-17 03:40:52 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-17 03:40:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-17 03:40:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-17 03:40:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-17 03:40:52 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2011-Dec-17 03:40:52 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-17 03:40:52 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-17 03:40:52 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2011-Dec-17 03:40:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-17 03:40:52 LOG5 log_alfabeam: Parameters: 9.8677499999999991 23.704305555555553 8.936599 2011.961405525135 -48.900043 2011-Dec-17 03:40:52 LOG4 log_alfabeam: ALFABEAM 0 9.867749999999996 23.704305555555550 2011-Dec-17 03:40:52 LOG4 log_alfabeam: ALFABEAM 1 9.868467970994539 23.612881794605091 2011-Dec-17 03:40:52 LOG4 log_alfabeam: ALFABEAM 2 9.874715110685592 23.673674540639325 2011-Dec-17 03:40:52 LOG4 log_alfabeam: ALFABEAM 3 9.873972690599386 23.765673889150424 2011-Dec-17 03:40:52 LOG4 log_alfabeam: ALFABEAM 4 9.866986776450780 23.795785509763807 2011-Dec-17 03:40:52 LOG4 log_alfabeam: ALFABEAM 5 9.860780529285950 23.734155732446215 2011-Dec-17 03:40:52 LOG4 log_alfabeam: ALFABEAM 6 9.861519113319481 23.643250164950672 2011-Dec-17 03:40:52 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-17 03:40:52 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-17 03:40:52 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Dec-17 03:40:52 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_008 2011-Dec-17 03:40:52 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-17 03:40:52 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-17 03:40:52 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-17 03:40:52 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-17 03:40:52 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-17 03:40:52 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-17 03:40:52 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-17 03:40:52 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-17 03:40:52 LOG3 take_mock_data: PSET configuration: patternid=135100001 2011-Dec-17 03:40:52 LOG3 take_mock_data: PSET configuration: scanid=135100002 2011-Dec-17 03:40:52 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-17 03:40:52 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-17 03:40:52 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-17 03:40:52 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456359213.0 2011-Dec-17 03:40:52 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306359213.0 2011-Dec-17 03:40:52 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-17 03:40:52 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-17 03:40:52 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGES3193_p3_008:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=135100001:scanid=135100002:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456359213.0:topobfreqhz=1306359213.0:filetype=1 2011-Dec-17 03:40:52 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-17 03:40:52 LOG5 begin_task: Level: (5) ID = <10055> Status = 0 0 0 0 ok 2011-Dec-17 03:40:52 LOG4 from_mock: From MOCK: psetok 2011-Dec-17 03:40:52 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-17 03:40:52 LOG5 end_task: Level: (5) ID = <10055> Status = 0 0 0 0 ok 2011-Dec-17 03:40:52 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-17 03:40:52 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-17 03:40:52 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-17 03:40:52 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-17 03:40:52 LOG5 begin_task: Level: (5) ID = <10056> Status = 0 0 0 0 ok 2011-Dec-17 03:40:52 LOG4 from_mock: From MOCK: starok 2011-Dec-17 03:40:52 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-17 03:40:52 LOG5 end_task: Level: (5) ID = <10056> Status = 0 0 0 0 ok 2011-Dec-17 03:40:52 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-17 03:40:52 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135100002 2011-Dec-17 03:40:52 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-17 03:40:52 LOG5 begin_task: Level: (5) ID = <10057> Status = 0 0 0 0 ok 2011-Dec-17 03:40:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 03:40:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-17 03:40:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27653.00 2011-Dec-17 03:40:53 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-17 03:40:53 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-17 03:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.496 (still bad) 2011-Dec-17 03:40:55 INFO2 got_mock_message: Mock spectrometer start file number is 00100 2011-Dec-17 03:40:55 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-17 03:40:55 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-17 03:40:55 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-17 03:40:55 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-17 03:40:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-17 03:40:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-17 03:40:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-17 03:40:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-17 03:40:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-17 03:40:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-17 03:40:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-17 03:40:55 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-17 03:40:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 03:40:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 03:40:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 03:40:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 03:40:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 03:40:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 03:40:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 03:40:58 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:40:58.02 2011-Dec-17 03:40:58 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324107658.02 Sat Dec 17 03:40:58 2011 2011-Dec-17 03:40:58 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-17 03:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.359213 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 03:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.359213 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 03:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.359213 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 03:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.359213 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 03:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.359213 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 03:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.359213 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 03:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.359213 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 03:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.359213 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 03:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.359213 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 03:40:58 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-17 03:40:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 03:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:41:03 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-17 03:41:04 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-17 03:41:04 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-17 03:41:04 LOG5 end_task: Level: (5) ID = <10057> Status = 0 0 0 0 ok 2011-Dec-17 03:41:04 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-17 03:41:04 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2011-Dec-17 03:41:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-17 03:41:04 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-17 03:41:04 LOG5 finish_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2011-Dec-17 03:41:04 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-17 03:41:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 03:41:04 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-17 03:41:04 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2011-Dec-17 03:41:04 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-17 03:41:04 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 245.84 and ZA = 14.31 2011-Dec-17 03:41:04 LOG3 track_source: Calling 'track_source AGES3193_p3_008 245.84 14.3066877881 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-17 03:41:04 START begin_task: Starting task 'sending tracking commands' 2011-Dec-17 03:41:04 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2011-Dec-17 03:41:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_008} INFO {Slewing to source 'AGES3193_p3_008' ...} 2011-Dec-17 03:41:04 INFO1 track_source: Starting to track AGES3193_p3_008 2011-Dec-17 03:41:04 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_008" 2011-Dec-17 03:41:04 LOG3 vw_send: To DATATAKING: set ra 245.84 2011-Dec-17 03:41:04 LOG3 vw_send: To DATATAKING: set dec 14.3066877881 2011-Dec-17 03:41:04 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-17 03:41:04 LOG3 vw_send: To DATATAKING: pnt tr 245.84 14.3066877881 -CF 2011-Dec-17 03:41:04 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 03:41:04 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-17 03:41:04 LOG5 finish_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2011-Dec-17 03:41:04 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-17 03:41:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 03:41:04 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-17 03:41:04 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2011-Dec-17 03:41:04 LOG1 fixed_driftmap: Parameters: HA = -00:56:59.7 Start = 08:56:42.5 LST = 08:56:23.8 diff = 18.7 secs 2011-Dec-17 03:41:04 INFO2 fixed_driftmap: Waiting 16.7 seconds for RA 9:53:42 2011-Dec-17 03:41:04 INFO2 lstwait: Waiting for 16.6 secs from LST 08:56:24 to LST 08:56:40 ... 2011-Dec-17 03:41:04 LOG4 send_obs_status: To obs_status: <1> TASKTIME 16.627931473880462 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-17 03:41:04 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-17 03:41:04 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2011-Dec-17 03:41:04 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_008" 2011-Dec-17 03:41:04 LOG4 got_cormsg: From DATATAKING: set ra 245.84 2011-Dec-17 03:41:04 LOG4 got_cormsg: From DATATAKING: set dec 14.3066877881 2011-Dec-17 03:41:04 LOG4 got_cormsg: From DATATAKING: vw% 245.84 2011-Dec-17 03:41:04 LOG4 got_cormsg: From DATATAKING: vw% 14.3066877881 2011-Dec-17 03:41:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:41:04 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-17 03:41:04 LOG4 got_cormsg: From DATATAKING: pnt tr 245.84 14.3066877881 -CF 2011-Dec-17 03:41:04 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 03:41:04 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-17 03:41:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 03:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:41:21 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-17 03:41:21 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2011-Dec-17 03:41:21 LOG4 lstwait: Finished waiting 0.38 seconds late 2011-Dec-17 03:41:21 INFO3 lstwait: Finished waiting 2011-Dec-17 03:41:21 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-17 03:41:21 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-17 03:41:21 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-17 03:41:21 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-17 03:41:21 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-17 03:41:21 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-17 03:41:21 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2011-Dec-17 03:41:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-17 03:41:21 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-17 03:41:21 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-17 03:41:21 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-17 03:41:21 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Dec-17 03:41:21 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_008 2011-Dec-17 03:41:21 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-17 03:41:21 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-17 03:41:21 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-17 03:41:21 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-17 03:41:21 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-17 03:41:21 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-17 03:41:21 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-17 03:41:21 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-17 03:41:21 LOG3 take_mock_data: PSET configuration: patternid=135100003 2011-Dec-17 03:41:21 LOG3 take_mock_data: PSET configuration: scanid=135100003 2011-Dec-17 03:41:21 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-17 03:41:21 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-17 03:41:21 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-17 03:41:21 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456359213.0 2011-Dec-17 03:41:21 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306359213.0 2011-Dec-17 03:41:21 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-17 03:41:21 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-17 03:41:21 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGES3193_p3_008:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=135100003:scanid=135100003:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456359213.0:topobfreqhz=1306359213.0:filetype=1 2011-Dec-17 03:41:21 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-17 03:41:21 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2011-Dec-17 03:41:21 LOG4 from_mock: From MOCK: psetok 2011-Dec-17 03:41:21 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-17 03:41:21 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2011-Dec-17 03:41:21 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-17 03:41:21 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-17 03:41:21 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-17 03:41:21 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-17 03:41:21 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2011-Dec-17 03:41:21 LOG4 from_mock: From MOCK: starok 2011-Dec-17 03:41:21 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-17 03:41:21 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2011-Dec-17 03:41:21 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-17 03:41:21 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 135100003 2011-Dec-17 03:41:21 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-17 03:41:21 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2011-Dec-17 03:41:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 03:41:21 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-17 03:41:21 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-17 03:41:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-17 03:41:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27682.00 2011-Dec-17 03:41:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.359213 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 03:41:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.359213 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 03:41:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.359213 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 03:41:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.359213 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 03:41:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.359213 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 03:41:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.359213 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 03:41:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.359213 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 03:41:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.359213 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 03:41:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.359213 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 03:41:23 INFO2 got_mock_message: Mock spectrometer start file number is 00200 2011-Dec-17 03:41:23 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-17 03:41:23 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1199.9 s 2011-Dec-17 03:41:23 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-17 03:41:23 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-17 03:41:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-17 03:41:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-17 03:41:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-17 03:41:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-17 03:41:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-17 03:41:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-17 03:41:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-17 03:41:23 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-17 03:41:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 03:41:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 03:41:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 03:41:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 03:41:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 03:41:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 03:41:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 03:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:41:26 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:41:26.02 2011-Dec-17 03:41:26 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324107686.02 Sat Dec 17 03:41:26 2011 2011-Dec-17 03:41:26 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-17 03:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:41:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 03:41:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.904 1.075 0.929 0.933 2011-Dec-17 03:41:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.921 0.996 1.076 0.909 2011-Dec-17 03:41:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.838 0.897 0.973 1.116 2011-Dec-17 03:41:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.014 1.015 0.014 2011-Dec-17 03:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-17 03:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-17 03:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-17 03:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-17 03:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-17 03:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-17 03:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-17 03:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-17 03:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:42:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 03:42:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 1.071 0.924 0.930 2011-Dec-17 03:42:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.920 0.993 1.071 0.903 2011-Dec-17 03:42:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.839 0.896 0.976 1.123 2011-Dec-17 03:42:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.014 1.013 0.014 2011-Dec-17 03:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 03:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 03:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 03:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 03:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 03:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:43:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 03:43:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 1.072 0.923 0.929 2011-Dec-17 03:43:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 0.995 1.071 0.904 2011-Dec-17 03:43:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.838 0.897 0.974 1.121 2011-Dec-17 03:43:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.014 1.013 0.014 2011-Dec-17 03:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 03:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 03:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 03:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 03:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 03:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 03:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 03:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 03:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 03:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 03:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 03:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 03:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:44:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 03:44:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.906 1.077 0.923 0.930 2011-Dec-17 03:44:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 0.995 1.074 0.905 2011-Dec-17 03:44:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.838 0.897 0.972 1.118 2011-Dec-17 03:44:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.014 1.023 0.014 2011-Dec-17 03:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 03:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 03:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:45:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 03:45:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.906 1.076 0.925 0.931 2011-Dec-17 03:45:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.922 0.993 1.072 0.905 2011-Dec-17 03:45:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.840 0.898 0.975 1.119 2011-Dec-17 03:45:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.014 1.016 0.014 2011-Dec-17 03:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:46:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 03:46:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.905 1.076 0.923 0.932 2011-Dec-17 03:46:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.920 0.993 1.075 0.905 2011-Dec-17 03:46:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.842 0.902 0.973 1.120 2011-Dec-17 03:46:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.014 1.017 0.014 2011-Dec-17 03:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:47:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 03:47:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.905 1.072 0.924 0.931 2011-Dec-17 03:47:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.920 0.993 1.074 0.905 2011-Dec-17 03:47:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.840 0.898 0.974 1.122 2011-Dec-17 03:47:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.014 1.013 0.014 2011-Dec-17 03:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:48:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 03:48:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.904 1.073 0.926 0.931 2011-Dec-17 03:48:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.926 1.001 1.073 0.905 2011-Dec-17 03:48:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.841 0.898 0.973 1.121 2011-Dec-17 03:48:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.014 1.016 0.014 2011-Dec-17 03:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 03:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 03:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 03:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:49:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 03:49:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.906 1.077 0.922 0.930 2011-Dec-17 03:49:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 0.994 1.073 0.905 2011-Dec-17 03:49:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.842 0.897 0.976 1.121 2011-Dec-17 03:49:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.938 0.014 1.023 0.014 2011-Dec-17 03:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:50:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 03:50:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.904 1.076 0.925 0.931 2011-Dec-17 03:50:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.920 0.991 1.074 0.905 2011-Dec-17 03:50:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.845 0.903 0.975 1.123 2011-Dec-17 03:50:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.934 0.014 1.019 0.014 2011-Dec-17 03:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:51:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 03:51:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.905 1.076 0.924 0.930 2011-Dec-17 03:51:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 0.993 1.076 0.907 2011-Dec-17 03:51:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.841 0.898 0.977 1.124 2011-Dec-17 03:51:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.935 0.014 1.019 0.014 2011-Dec-17 03:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 03:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 03:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 03:52:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 03:52:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.911 1.079 0.925 0.931 2011-Dec-17 03:52:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 0.992 1.077 0.907 2011-Dec-17 03:52:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.848 0.911 0.975 1.122 2011-Dec-17 03:52:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.938 0.014 1.020 0.014 2011-Dec-17 03:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:53:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-17 03:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-17 03:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 03:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 03:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-17 03:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-17 03:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-17 03:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-17 03:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-17 03:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-17 03:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-17 03:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-17 03:53:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 03:53:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.907 1.081 0.926 0.934 2011-Dec-17 03:53:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.922 0.992 1.077 0.906 2011-Dec-17 03:53:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.843 0.900 0.986 1.133 2011-Dec-17 03:53:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.014 1.021 0.014 2011-Dec-17 03:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-17 03:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-17 03:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 03:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 03:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 03:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:54:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 03:54:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.908 1.076 0.926 0.933 2011-Dec-17 03:54:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.922 0.991 1.077 0.906 2011-Dec-17 03:54:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.844 0.903 0.977 1.123 2011-Dec-17 03:54:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.936 0.014 1.020 0.014 2011-Dec-17 03:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 03:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:55:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 03:55:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.907 1.076 0.929 0.936 2011-Dec-17 03:55:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 0.992 1.079 0.906 2011-Dec-17 03:55:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.843 0.900 0.979 1.123 2011-Dec-17 03:55:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.014 1.024 0.014 2011-Dec-17 03:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:56:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 03:56:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.918 1.092 0.929 0.934 2011-Dec-17 03:56:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 0.989 1.081 0.908 2011-Dec-17 03:56:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.843 0.901 0.980 1.125 2011-Dec-17 03:56:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.014 1.024 0.014 2011-Dec-17 03:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 03:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 03:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 03:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 03:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 03:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 03:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:57:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 03:57:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.911 1.081 0.925 0.932 2011-Dec-17 03:57:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 0.992 1.081 0.907 2011-Dec-17 03:57:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.845 0.905 0.981 1.125 2011-Dec-17 03:57:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.014 1.022 0.014 2011-Dec-17 03:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-17 03:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 03:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-17 03:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-17 03:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-17 03:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-17 03:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-17 03:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 03:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-17 03:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 03:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 03:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 03:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 03:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 03:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-17 03:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 03:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 03:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-17 03:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-17 03:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 03:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:59:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 03:59:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.911 1.083 0.927 0.934 2011-Dec-17 03:59:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.928 0.995 1.084 0.907 2011-Dec-17 03:59:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.846 0.903 0.978 1.127 2011-Dec-17 03:59:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.014 1.024 0.014 2011-Dec-17 03:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 03:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 03:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 03:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 03:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 03:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 03:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 03:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 03:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 03:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 03:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 03:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 03:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:00:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:00:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.910 1.081 0.926 0.934 2011-Dec-17 04:00:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.926 0.995 1.086 0.911 2011-Dec-17 04:00:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.845 0.900 0.980 1.126 2011-Dec-17 04:00:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.014 1.026 0.014 2011-Dec-17 04:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:00:44 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 16-31 errors 2011-Dec-17 04:00:44 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 4-7 errors 2011-Dec-17 04:00:44 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2011-Dec-17 04:00:44 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 2-3 errors 2011-Dec-17 04:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-17 04:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 04:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-17 04:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-17 04:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-17 04:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-17 04:00:56 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 32-63 errors 2011-Dec-17 04:00:56 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 8-15 errors 2011-Dec-17 04:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-17 04:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:01:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:01:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.910 1.080 0.928 0.937 2011-Dec-17 04:01:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.928 0.995 1.078 0.908 2011-Dec-17 04:01:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.845 0.902 0.979 1.125 2011-Dec-17 04:01:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.014 1.022 0.014 2011-Dec-17 04:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 04:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:01:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 04:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:01:27 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-17 04:01:27 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-17 04:01:27 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-17 04:01:27 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2011-Dec-17 04:01:27 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-17 04:01:27 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2011-Dec-17 04:01:27 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-17 04:01:27 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2011-Dec-17 04:01:27 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-17 04:01:27 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-17 04:01:27 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-17 04:01:27 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2011-Dec-17 04:01:27 COMMAND run_command_line: EXECUTING command 13: 'ENDIF' 2011-Dec-17 04:01:27 COMMAND run_command_line: EXECUTING command 16: 'IF LSTSLEW(AGES3193_p3_010) < 092011 THEN' 2011-Dec-17 04:01:27 LOG3 is_if_valid: Current source data: up 237.0 10.1 UP - - 118 1.8 2011-Dec-17 04:01:27 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_010) < 092011 2011-Dec-17 04:01:27 INFO5 is_if_valid: Condition parsed as: 9.310594 < 9.3363888888888891 2011-Dec-17 04:01:27 COMMAND run_command_line: EXECUTING command 17: 'FIXEDDRIFT az=234.71 alfaangle=-34.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_010 ra=95300.00 dec=233930.00' 2011-Dec-17 04:01:27 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-17 04:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:01:28 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-17 04:01:28 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 234.71 -34.4 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_010 95300.00 233930.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-17 04:01:28 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-17 04:01:28 LOG5 begin_task: Level: (2) ID = <10064> Status = 0 0 0 0 ok 2011-Dec-17 04:01:28 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_008' 2011-Dec-17 04:01:28 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-17 04:01:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_010} 2011-Dec-17 04:01:28 INFO3 fixed_driftmap: Sending telescope to Az = 234.71 and ZA = 9.41 2011-Dec-17 04:01:28 LOG3 track_source: Calling 'track_source AGES3193_p3_010 234.71 9.4119151157 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-17 04:01:28 START begin_task: Starting task 'sending tracking commands' 2011-Dec-17 04:01:28 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2011-Dec-17 04:01:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_010} INFO {Slewing to source 'AGES3193_p3_010' ...} 2011-Dec-17 04:01:28 INFO1 track_source: Starting to track AGES3193_p3_010 2011-Dec-17 04:01:28 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_010" 2011-Dec-17 04:01:28 LOG3 vw_send: To DATATAKING: set ra 234.71 2011-Dec-17 04:01:28 LOG3 vw_send: To DATATAKING: set dec 9.4119151157 2011-Dec-17 04:01:28 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-17 04:01:28 LOG3 vw_send: To DATATAKING: pnt tr 234.71 9.4119151157 -CF 2011-Dec-17 04:01:28 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 04:01:28 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-17 04:01:28 LOG5 finish_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2011-Dec-17 04:01:28 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-17 04:01:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 04:01:28 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-17 04:01:28 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2011-Dec-17 04:01:28 START begin_task: Starting task 'rotate ALFA to -34.4 degrees' 2011-Dec-17 04:01:28 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2011-Dec-17 04:01:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -34.4 degrees ...} 2011-Dec-17 04:01:28 INFO2 rotate_alfa: ALFA commanded to -34.4 degrees 2011-Dec-17 04:01:28 LOG3 sock_errsend: To ALFAMOTOR: POSITION -34.4 REPLY 2011-Dec-17 04:01:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-17 04:01:28 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-17 04:01:28 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2011-Dec-17 04:01:28 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_010" 2011-Dec-17 04:01:28 LOG4 got_cormsg: From DATATAKING: set ra 234.71 2011-Dec-17 04:01:28 LOG4 got_cormsg: From DATATAKING: set dec 9.4119151157 2011-Dec-17 04:01:28 LOG4 got_cormsg: From DATATAKING: vw% 234.71 2011-Dec-17 04:01:28 LOG4 got_cormsg: From DATATAKING: vw% 9.4119151157 2011-Dec-17 04:01:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:01:28 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-17 04:01:28 LOG4 got_cormsg: From DATATAKING: pnt tr 234.71 9.4119151157 -CF 2011-Dec-17 04:01:28 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 04:01:28 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-17 04:01:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:01:37 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-17 04:01:37 INFO3 alfa_motor: ALFA rotator in-position -34.40 degrees 2011-Dec-17 04:01:37 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-17 04:01:37 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2011-Dec-17 04:01:37 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-17 04:01:38 STOP finish_task: Finishing task 'rotate ALFA to -34.4 degrees' 2011-Dec-17 04:01:38 LOG5 finish_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2011-Dec-17 04:01:38 INFO2 finish_task: DONE finished configuration: rotating ALFA to -34.4 degrees 2011-Dec-17 04:01:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 04:01:38 STOP end_task: Finishing task 'rotate ALFA to -34.4 degrees' with status 'OK' 2011-Dec-17 04:01:38 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2011-Dec-17 04:01:38 START begin_task: Starting task 'waiting on telescope' 2011-Dec-17 04:01:38 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2011-Dec-17 04:01:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-17 04:01:38 LOG3 waittrk: Start waittrk 5 2011-Dec-17 04:01:38 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-17 04:01:38 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2011-Dec-17 04:01:43 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-17 04:01:43 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2011-Dec-17 04:01:43 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-17 04:01:43 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2011-Dec-17 04:03:35 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-17 04:03:35 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2011-Dec-17 04:03:35 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-17 04:03:35 INFO2 waittrk: Now tracking AGES3193_p3_010 2011-Dec-17 04:03:35 LOG4 waittrk: Current telescope position: Az = 234.24 ZA = 9.42 2011-Dec-17 04:03:35 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-17 04:03:35 LOG5 finish_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2011-Dec-17 04:03:35 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-17 04:03:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 04:03:35 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-17 04:03:35 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2011-Dec-17 04:03:35 START begin_task: Starting task 'selecting calibration type' 2011-Dec-17 04:03:35 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2011-Dec-17 04:03:35 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-17 04:03:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-17 04:03:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 04:03:35 START begin_task: Starting task 'waiting on setcal' 2011-Dec-17 04:03:35 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2011-Dec-17 04:03:35 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-17 04:03:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 04:03:36 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:03:36 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-17 04:03:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-17 04:03:36 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2011-Dec-17 04:03:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-17 04:03:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-17 04:03:36 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-17 04:03:36 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-17 04:03:36 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2011-Dec-17 04:03:36 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:03:36 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-17 04:03:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-17 04:03:36 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2011-Dec-17 04:03:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-17 04:03:36 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-17 04:03:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-17 04:03:36 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-17 04:03:36 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-17 04:03:36 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2011-Dec-17 04:03:36 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-17 04:03:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-17 04:03:36 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2011-Dec-17 04:03:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-17 04:03:36 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-17 04:03:36 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-17 04:03:36 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2011-Dec-17 04:03:36 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Dec-17 04:03:36 INFO2 astwait: Waiting for 11 seconds from 08:03:36 to 08:03:47 UTC ... 2011-Dec-17 04:03:36 LOG4 send_obs_status: To obs_status: <1> TASKTIME 11 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-17 04:03:36 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Dec-17 04:03:36 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2011-Dec-17 04:03:47 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Dec-17 04:03:47 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2011-Dec-17 04:03:47 INFO3 astwait: Finished waiting 2011-Dec-17 04:03:47 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-17 04:03:47 LOG5 dopset_later: Calling 'dopset_later 61.372077652497239' 2011-Dec-17 04:03:47 INFO3 dopset_later: Setting Doppler correction for 04:04:47 (61.4 seconds from now) 2011-Dec-17 04:03:47 LOG5 antvel: Calling 'antvel 234.710000 9.411915 F Heliocentric 61.372077652497239' 2011-Dec-17 04:03:47 LOG2 antvel: Transforming current Az = 234.71 ZA = 9.41 to apparent RA = 09:53:42.0 Dec = +23:35:52.0 2011-Dec-17 04:03:47 LOG2 antvel: Parameters to Doppler: Heliocentric 29087 2011 351 0.0 2011-Dec-17 04:03:47 INFO5 antvel: Computed antenna velocity: -25.09177 km/s 2011-Dec-17 04:03:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-25.0917691402 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-17 04:03:47 INFO4 dopset_gen: New sky frequencies: 1381.359044 1381.359044 1381.359044 1381.359044 1381.359044 1381.359044 1381.359044 1381.359044 1381.359044 2011-Dec-17 04:03:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.359044 sky0=1381.359044 sky1=1381.359044 sky2=1381.359044 sky3=1381.359044 sky4=1381.359044 sky5=1381.359044 sky6=1381.359044 sky7=1381.359044 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-17 04:03:47 LOG2 dopset_gen: Result from 'sky2syn': 1631.359044 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-17 04:03:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631359044.0} 2011-Dec-17 04:03:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 04:03:47 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-17 04:03:47 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-17 04:03:47 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.2 Dec = +23:39:15.5 2011-Dec-17 04:03:47 LOG3 track_source: Calling 'track_source AGES3193_p3_010 095203.2 233915.5 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-17 04:03:47 START begin_task: Starting task 'sending tracking commands' 2011-Dec-17 04:03:47 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2011-Dec-17 04:03:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_010} INFO {Slewing to source 'AGES3193_p3_010' ...} 2011-Dec-17 04:03:47 INFO1 track_source: Starting to track AGES3193_p3_010 2011-Dec-17 04:03:47 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_010" 2011-Dec-17 04:03:47 LOG3 vw_send: To DATATAKING: set ra 095203.2 2011-Dec-17 04:03:47 LOG3 vw_send: To DATATAKING: set dec 233915.5 2011-Dec-17 04:03:47 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-17 04:03:47 LOG3 vw_send: To DATATAKING: pnt tr 095203.2 233915.5 -CJ 2011-Dec-17 04:03:47 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 04:03:47 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-17 04:03:47 LOG5 finish_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2011-Dec-17 04:03:47 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-17 04:03:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 04:03:47 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-17 04:03:47 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2011-Dec-17 04:03:47 START begin_task: Starting task 'waiting on telescope' 2011-Dec-17 04:03:47 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2011-Dec-17 04:03:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-17 04:03:47 LOG3 waittrk: Start waittrk 5 2011-Dec-17 04:03:47 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-17 04:03:47 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2011-Dec-17 04:03:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631359044.0} 2011-Dec-17 04:03:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 04:03:47 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_010" 2011-Dec-17 04:03:47 LOG4 got_cormsg: From DATATAKING: set ra 095203.2 2011-Dec-17 04:03:47 LOG4 got_cormsg: From DATATAKING: set dec 233915.5 2011-Dec-17 04:03:47 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-17 04:03:47 LOG4 got_cormsg: From DATATAKING: vw% 095203.2 2011-Dec-17 04:03:47 LOG4 got_cormsg: From DATATAKING: vw% 233915.5 2011-Dec-17 04:03:47 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:03:47 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-17 04:03:47 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.2 233915.5 -CJ 2011-Dec-17 04:03:47 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 04:03:47 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-17 04:03:47 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:03:52 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-17 04:03:52 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2011-Dec-17 04:03:52 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-17 04:03:52 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2011-Dec-17 04:03:54 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-17 04:03:54 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2011-Dec-17 04:03:54 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-17 04:03:54 INFO2 waittrk: Now tracking AGES3193_p3_010 2011-Dec-17 04:03:54 LOG4 waittrk: Current telescope position: Az = 234.21 ZA = 9.40 2011-Dec-17 04:03:54 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-17 04:03:54 LOG5 finish_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2011-Dec-17 04:03:54 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-17 04:03:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 04:03:54 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-17 04:03:54 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2011-Dec-17 04:03:54 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-17 04:03:54 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2011-Dec-17 04:03:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-17 04:03:54 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-17 04:03:54 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-17 04:03:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-17 04:03:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 04:03:54 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-17 04:03:54 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2011-Dec-17 04:03:54 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-17 04:03:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 04:03:57 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:03:57 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-17 04:03:57 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-17 04:03:57 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2011-Dec-17 04:03:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-17 04:03:57 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-17 04:03:57 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2011-Dec-17 04:03:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-17 04:03:57 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-17 04:03:57 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-17 04:03:57 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-17 04:03:57 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-17 04:03:57 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-17 04:03:57 LOG5 begin_task: Level: (5) ID = <10083> Status = 0 0 0 0 ok 2011-Dec-17 04:03:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-17 04:03:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:03:58 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 8 6 dB 2011-Dec-17 04:03:58 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 3 dB 2011-Dec-17 04:03:58 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 2 dB 2011-Dec-17 04:03:58 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2011-Dec-17 04:03:58 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-17 04:03:58 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-17 04:03:58 LOG5 end_task: Level: (5) ID = <10083> Status = 0 0 0 0 ok 2011-Dec-17 04:03:58 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.108 1.051 ALFA beam 1: 0.894 0.920 2011-Dec-17 04:03:58 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.897 0.982 ALFA beam 3: 1.048 1.093 2011-Dec-17 04:03:58 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.830 1.097 ALFA beam 5: 0.940 1.082 2011-Dec-17 04:03:58 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.910 0.014 ALFA beam 7: 0.991 0.014 2011-Dec-17 04:03:58 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-17 04:03:58 LOG5 finish_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2011-Dec-17 04:03:58 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-17 04:03:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 04:03:58 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-17 04:03:58 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2011-Dec-17 04:03:58 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-17 04:03:58 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2011-Dec-17 04:03:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-17 04:03:58 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-17 04:03:58 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-17 04:03:58 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-17 04:03:58 LOG5 begin_task: Level: (5) ID = <10085> Status = 0 0 0 0 ok 2011-Dec-17 04:03:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:03:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.108 1.051 0.894 0.920 2011-Dec-17 04:03:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.897 0.982 1.048 1.093 2011-Dec-17 04:03:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.830 1.097 0.940 1.082 2011-Dec-17 04:03:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.910 0.014 0.991 0.014 2011-Dec-17 04:04:04 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.8 27.9 B 30.1 30.1 mn:A 0.2 0.1 B -0.3 -0.4 gn: 11 11 2011-Dec-17 04:04:04 INFO3 from_mock: From MOCK: b0s1g0 rms:A 32.2 30.8 B 28.3 30.0 mn:A 0.2 -0.3 B -0.5 0.2 gn: 12 11 2011-Dec-17 04:04:04 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.6 28.7 B 33.0 28.9 mn:A 0.6 0.7 B 0.1 -0.1 gn: 7 11 2011-Dec-17 04:04:04 INFO3 from_mock: From MOCK: b1s1g0 rms:A 30.1 27.7 B 31.6 31.6 mn:A -0.3 -0.4 B 0.5 0.0 gn: 8 10 2011-Dec-17 04:04:04 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.9 30.9 B 28.1 29.4 mn:A 0.0 -0.3 B 0.3 0.0 gn: 11 11 2011-Dec-17 04:04:04 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.1 29.4 B 32.6 30.3 mn:A 0.2 -0.2 B 0.1 0.3 gn: 11 12 2011-Dec-17 04:04:04 INFO3 from_mock: From MOCK: b3s0g0 rms:A 28.9 28.7 B 30.9 27.6 mn:A 0.4 -0.3 B -0.1 -0.3 gn: 12 12 2011-Dec-17 04:04:04 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.3 29.6 B 29.4 30.6 mn:A -0.3 0.3 B 0.1 0.1 gn: 12 12 2011-Dec-17 04:04:04 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.4 29.5 B 31.4 31.6 mn:A -0.3 -0.3 B -0.3 0.1 gn: 13 12 2011-Dec-17 04:04:04 INFO3 from_mock: From MOCK: b4s1g0 rms:A 32.5 29.4 B 30.2 29.1 mn:A -0.1 -0.1 B -0.5 0.2 gn: 16 13 2011-Dec-17 04:04:04 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.3 28.2 B 30.4 30.4 mn:A 0.4 0.3 B 0.0 0.3 gn: 12 11 2011-Dec-17 04:04:04 INFO3 from_mock: From MOCK: b5s1g0 rms:A 29.4 29.2 B 30.8 30.6 mn:A -0.3 0.3 B -0.1 0.3 gn: 12 11 2011-Dec-17 04:04:04 INFO3 from_mock: From MOCK: b6s0g0 rms:A 29.8 27.2 B 14.1 14.5 mn:A -0.5 0.2 B 0.4 -0.5 gn: 12 31 2011-Dec-17 04:04:04 INFO3 from_mock: From MOCK: b6s1g0 rms:A 30.1 27.3 B 11.2 10.8 mn:A 0.6 0.5 B 0.1 0.1 gn: 13 31 2011-Dec-17 04:04:04 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-17 04:04:04 LOG5 end_task: Level: (5) ID = <10085> Status = 0 0 0 0 ok 2011-Dec-17 04:04:04 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-17 04:04:04 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-17 04:04:04 LOG5 finish_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2011-Dec-17 04:04:04 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-17 04:04:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 04:04:04 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-17 04:04:04 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2011-Dec-17 04:04:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-17 04:04:04 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-17 04:04:04 LOG5 finish_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2011-Dec-17 04:04:04 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-17 04:04:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 04:04:04 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-17 04:04:04 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2011-Dec-17 04:04:04 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel Cabrera 2011-Dec-17 04:04:04 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel Cabrera 2011-Dec-17 04:04:04 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel Cabrera 2011-Dec-17 04:04:04 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel Cabrera 2011-Dec-17 04:04:04 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-17 04:04:04 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-17 04:04:04 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2011-Dec-17 04:04:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-17 04:04:04 START begin_task: Starting task 'selecting calibration type' 2011-Dec-17 04:04:04 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2011-Dec-17 04:04:04 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-17 04:04:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-17 04:04:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 04:04:04 START begin_task: Starting task 'waiting on setcal' 2011-Dec-17 04:04:04 LOG5 begin_task: Level: (5) ID = <10088> Status = 0 0 0 0 ok 2011-Dec-17 04:04:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2011-Dec-17 04:04:04 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-17 04:04:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 04:04:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:04:04 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-17 04:04:05 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-17 04:04:05 LOG5 end_task: Level: (5) ID = <10088> Status = 0 0 0 0 ok 2011-Dec-17 04:04:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-17 04:04:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-17 04:04:05 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-17 04:04:05 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-17 04:04:05 LOG5 begin_task: Level: (5) ID = <10089> Status = 0 0 0 0 ok 2011-Dec-17 04:04:05 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:04:05 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-17 04:04:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-17 04:04:05 LOG5 end_task: Level: (5) ID = <10089> Status = 0 0 0 0 ok 2011-Dec-17 04:04:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-17 04:04:05 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-17 04:04:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-17 04:04:05 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-17 04:04:05 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-17 04:04:05 LOG5 begin_task: Level: (5) ID = <10090> Status = 0 0 0 0 ok 2011-Dec-17 04:04:05 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-17 04:04:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-17 04:04:05 LOG5 end_task: Level: (5) ID = <10090> Status = 0 0 0 0 ok 2011-Dec-17 04:04:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-17 04:04:05 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-17 04:04:05 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-17 04:04:05 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2011-Dec-17 04:04:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-17 04:04:05 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-17 04:04:05 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-17 04:04:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-17 04:04:05 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2011-Dec-17 04:04:05 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-17 04:04:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-17 04:04:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-17 04:04:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-17 04:04:05 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2011-Dec-17 04:04:05 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-17 04:04:05 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-17 04:04:05 LOG5 begin_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2011-Dec-17 04:04:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-17 04:04:05 LOG5 log_alfabeam: Parameters: 9.8675555555555547 23.654305555555553 9.324881 2011.9614496983295 -34.400082 2011-Dec-17 04:04:05 LOG4 log_alfabeam: ALFABEAM 0 9.867555555555553 23.654305555555545 2011-Dec-17 04:04:05 LOG4 log_alfabeam: ALFABEAM 1 9.867917647559770 23.560170520775699 2011-Dec-17 04:04:05 LOG4 log_alfabeam: ALFABEAM 2 9.874204582548661 23.622552610516756 2011-Dec-17 04:04:05 LOG4 log_alfabeam: ALFABEAM 3 9.873805634614943 23.717471779530968 2011-Dec-17 04:04:05 LOG4 log_alfabeam: ALFABEAM 4 9.867117242527605 23.748731468288717 2011-Dec-17 04:04:05 LOG4 log_alfabeam: ALFABEAM 5 9.860904098225598 23.684859327477294 2011-Dec-17 04:04:05 LOG4 log_alfabeam: ALFABEAM 6 9.861305005702592 23.591213284208880 2011-Dec-17 04:04:05 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-17 04:04:05 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-17 04:04:05 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Dec-17 04:04:05 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_010 2011-Dec-17 04:04:05 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-17 04:04:05 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-17 04:04:05 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-17 04:04:05 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-17 04:04:05 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-17 04:04:05 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-17 04:04:05 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-17 04:04:05 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-17 04:04:05 LOG3 take_mock_data: PSET configuration: patternid=135100003 2011-Dec-17 04:04:05 LOG3 take_mock_data: PSET configuration: scanid=135100004 2011-Dec-17 04:04:05 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-17 04:04:05 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-17 04:04:05 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-17 04:04:05 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456359044.0 2011-Dec-17 04:04:05 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306359044.0 2011-Dec-17 04:04:05 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-17 04:04:05 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-17 04:04:05 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGES3193_p3_010:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=135100003:scanid=135100004:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456359044.0:topobfreqhz=1306359044.0:filetype=1 2011-Dec-17 04:04:05 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-17 04:04:05 LOG5 begin_task: Level: (5) ID = <10093> Status = 0 0 0 0 ok 2011-Dec-17 04:04:05 LOG4 from_mock: From MOCK: psetok 2011-Dec-17 04:04:05 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-17 04:04:05 LOG5 end_task: Level: (5) ID = <10093> Status = 0 0 0 0 ok 2011-Dec-17 04:04:05 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-17 04:04:05 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-17 04:04:05 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-17 04:04:05 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-17 04:04:05 LOG5 begin_task: Level: (5) ID = <10094> Status = 0 0 0 0 ok 2011-Dec-17 04:04:05 NOTE WAPPDATA-new_file: New FITS file: wapp.20111217.a2048.0001.fits 2011-Dec-17 04:04:05 LOG4 from_mock: From MOCK: starok 2011-Dec-17 04:04:05 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-17 04:04:05 LOG5 end_task: Level: (5) ID = <10094> Status = 0 0 0 0 ok 2011-Dec-17 04:04:05 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-17 04:04:05 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135100004 2011-Dec-17 04:04:06 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-17 04:04:06 LOG5 begin_task: Level: (5) ID = <10095> Status = 0 0 0 0 ok 2011-Dec-17 04:04:06 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111217.a2048.0001.fits} 2011-Dec-17 04:04:06 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-17 04:04:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 04:04:06 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-17 04:04:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-17 04:04:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29047.00 2011-Dec-17 04:04:07 INFO2 got_mock_message: Mock spectrometer start file number is 00300 2011-Dec-17 04:04:07 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-17 04:04:07 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-17 04:04:07 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-17 04:04:07 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-17 04:04:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-17 04:04:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-17 04:04:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-17 04:04:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-17 04:04:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-17 04:04:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-17 04:04:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-17 04:04:07 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-17 04:04:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:04:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:04:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:04:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:04:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:04:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:04:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:04:10 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:04:10.02 2011-Dec-17 04:04:10 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324109050.02 Sat Dec 17 04:04:10 2011 2011-Dec-17 04:04:10 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-17 04:04:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.359044 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 04:04:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.359044 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 04:04:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.359044 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 04:04:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.359044 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 04:04:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.359044 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 04:04:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.359044 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 04:04:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.359044 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 04:04:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.359044 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 04:04:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.359044 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 04:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.509 (still bad) 2011-Dec-17 04:04:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 04:04:15 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-17 04:04:16 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-17 04:04:16 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-17 04:04:16 LOG5 end_task: Level: (5) ID = <10095> Status = 0 0 0 0 ok 2011-Dec-17 04:04:16 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-17 04:04:16 LOG5 end_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2011-Dec-17 04:04:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-17 04:04:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-17 04:04:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-17 04:04:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-17 04:04:16 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2011-Dec-17 04:04:16 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-17 04:04:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-17 04:04:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-17 04:04:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-17 04:04:16 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2011-Dec-17 04:04:16 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-17 04:04:16 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-17 04:04:16 LOG5 begin_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2011-Dec-17 04:04:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-17 04:04:16 LOG5 log_alfabeam: Parameters: 9.8675555555555547 23.654305555555553 9.327667 2011.9614500152104 -34.400082 2011-Dec-17 04:04:16 LOG4 log_alfabeam: ALFABEAM 0 9.867555555555553 23.654305555555549 2011-Dec-17 04:04:16 LOG4 log_alfabeam: ALFABEAM 1 9.867934487573503 23.560183665247195 2011-Dec-17 04:04:16 LOG4 log_alfabeam: ALFABEAM 2 9.874210296593189 23.622777199988391 2011-Dec-17 04:04:16 LOG4 log_alfabeam: ALFABEAM 3 9.873794205553105 23.717684718101403 2011-Dec-17 04:04:16 LOG4 log_alfabeam: ALFABEAM 4 9.867100059213730 23.748716742150833 2011-Dec-17 04:04:16 LOG4 log_alfabeam: ALFABEAM 5 9.860898612755477 23.684630660979522 2011-Dec-17 04:04:16 LOG4 log_alfabeam: ALFABEAM 6 9.861316397557648 23.591000787563690 2011-Dec-17 04:04:16 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-17 04:04:16 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-17 04:04:16 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Dec-17 04:04:16 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_010 2011-Dec-17 04:04:16 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-17 04:04:16 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-17 04:04:16 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-17 04:04:16 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-17 04:04:16 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-17 04:04:16 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-17 04:04:16 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-17 04:04:16 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-17 04:04:16 LOG3 take_mock_data: PSET configuration: patternid=135100003 2011-Dec-17 04:04:16 LOG3 take_mock_data: PSET configuration: scanid=135100005 2011-Dec-17 04:04:16 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-17 04:04:16 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-17 04:04:16 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-17 04:04:16 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456359044.0 2011-Dec-17 04:04:16 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306359044.0 2011-Dec-17 04:04:16 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-17 04:04:16 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-17 04:04:16 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGES3193_p3_010:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=135100003:scanid=135100005:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456359044.0:topobfreqhz=1306359044.0:filetype=1 2011-Dec-17 04:04:16 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-17 04:04:16 LOG5 begin_task: Level: (5) ID = <10098> Status = 0 0 0 0 ok 2011-Dec-17 04:04:16 LOG4 from_mock: From MOCK: psetok 2011-Dec-17 04:04:16 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-17 04:04:16 LOG5 end_task: Level: (5) ID = <10098> Status = 0 0 0 0 ok 2011-Dec-17 04:04:16 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-17 04:04:16 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-17 04:04:16 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-17 04:04:16 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-17 04:04:16 LOG5 begin_task: Level: (5) ID = <10099> Status = 0 0 0 0 ok 2011-Dec-17 04:04:16 LOG4 from_mock: From MOCK: starok 2011-Dec-17 04:04:16 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-17 04:04:16 LOG5 end_task: Level: (5) ID = <10099> Status = 0 0 0 0 ok 2011-Dec-17 04:04:16 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-17 04:04:16 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135100005 2011-Dec-17 04:04:16 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-17 04:04:16 LOG5 begin_task: Level: (5) ID = <10100> Status = 0 0 0 0 ok 2011-Dec-17 04:04:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 04:04:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-17 04:04:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29057.00 2011-Dec-17 04:04:17 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-17 04:04:17 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-17 04:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.548 (still bad) 2011-Dec-17 04:04:19 INFO2 got_mock_message: Mock spectrometer start file number is 00400 2011-Dec-17 04:04:19 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-17 04:04:19 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-17 04:04:19 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-17 04:04:19 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-17 04:04:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-17 04:04:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-17 04:04:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-17 04:04:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-17 04:04:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-17 04:04:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-17 04:04:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-17 04:04:19 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-17 04:04:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:04:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:04:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:04:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:04:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:04:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:04:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:04:22 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:04:22.01 2011-Dec-17 04:04:22 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324109062.01 Sat Dec 17 04:04:22 2011 2011-Dec-17 04:04:22 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-17 04:04:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.359044 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 04:04:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.359044 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 04:04:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.359044 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 04:04:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.359044 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 04:04:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.359044 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 04:04:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.359044 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 04:04:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.359044 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 04:04:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.359044 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 04:04:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.359044 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 04:04:22 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-17 04:04:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 04:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-17 04:04:27 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-17 04:04:28 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-17 04:04:28 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-17 04:04:28 LOG5 end_task: Level: (5) ID = <10100> Status = 0 0 0 0 ok 2011-Dec-17 04:04:28 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-17 04:04:28 LOG5 end_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2011-Dec-17 04:04:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-17 04:04:28 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-17 04:04:28 LOG5 finish_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2011-Dec-17 04:04:28 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-17 04:04:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 04:04:28 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-17 04:04:28 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2011-Dec-17 04:04:28 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-17 04:04:28 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 234.71 and ZA = 9.41 2011-Dec-17 04:04:28 LOG3 track_source: Calling 'track_source AGES3193_p3_010 234.71 9.4119151157 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-17 04:04:28 START begin_task: Starting task 'sending tracking commands' 2011-Dec-17 04:04:28 LOG5 begin_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2011-Dec-17 04:04:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_010} INFO {Slewing to source 'AGES3193_p3_010' ...} 2011-Dec-17 04:04:28 INFO1 track_source: Starting to track AGES3193_p3_010 2011-Dec-17 04:04:28 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_010" 2011-Dec-17 04:04:28 LOG3 vw_send: To DATATAKING: set ra 234.71 2011-Dec-17 04:04:28 LOG3 vw_send: To DATATAKING: set dec 9.4119151157 2011-Dec-17 04:04:28 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-17 04:04:28 LOG3 vw_send: To DATATAKING: pnt tr 234.71 9.4119151157 -CF 2011-Dec-17 04:04:28 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 04:04:28 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-17 04:04:28 LOG5 finish_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2011-Dec-17 04:04:28 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-17 04:04:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 04:04:28 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-17 04:04:28 LOG5 end_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2011-Dec-17 04:04:28 LOG1 fixed_driftmap: Parameters: HA = -00:33:30.1 Start = 09:20:12.1 LST = 09:19:51.6 diff = 20.4 secs 2011-Dec-17 04:04:28 INFO2 fixed_driftmap: Waiting 18.4 seconds for RA 9:53:42 2011-Dec-17 04:04:28 INFO2 lstwait: Waiting for 18.4 secs from LST 09:19:52 to LST 09:20:10 ... 2011-Dec-17 04:04:28 LOG4 send_obs_status: To obs_status: <1> TASKTIME 18.377790657299368 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-17 04:04:28 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-17 04:04:28 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2011-Dec-17 04:04:28 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_010" 2011-Dec-17 04:04:28 LOG4 got_cormsg: From DATATAKING: set ra 234.71 2011-Dec-17 04:04:28 LOG4 got_cormsg: From DATATAKING: set dec 9.4119151157 2011-Dec-17 04:04:28 LOG4 got_cormsg: From DATATAKING: vw% 234.71 2011-Dec-17 04:04:28 LOG4 got_cormsg: From DATATAKING: vw% 9.4119151157 2011-Dec-17 04:04:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:04:28 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-17 04:04:28 LOG4 got_cormsg: From DATATAKING: pnt tr 234.71 9.4119151157 -CF 2011-Dec-17 04:04:28 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 04:04:28 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-17 04:04:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-17 04:04:46 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-17 04:04:46 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2011-Dec-17 04:04:46 LOG4 lstwait: Finished waiting 0.62 seconds late 2011-Dec-17 04:04:46 INFO3 lstwait: Finished waiting 2011-Dec-17 04:04:46 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-17 04:04:46 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-17 04:04:47 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-17 04:04:47 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-17 04:04:47 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-17 04:04:47 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-17 04:04:47 LOG5 begin_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2011-Dec-17 04:04:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-17 04:04:47 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-17 04:04:47 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-17 04:04:47 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-17 04:04:47 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Dec-17 04:04:47 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_010 2011-Dec-17 04:04:47 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-17 04:04:47 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-17 04:04:47 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-17 04:04:47 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-17 04:04:47 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-17 04:04:47 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-17 04:04:47 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-17 04:04:47 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-17 04:04:47 LOG3 take_mock_data: PSET configuration: patternid=135100006 2011-Dec-17 04:04:47 LOG3 take_mock_data: PSET configuration: scanid=135100006 2011-Dec-17 04:04:47 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-17 04:04:47 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-17 04:04:47 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-17 04:04:47 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456359044.0 2011-Dec-17 04:04:47 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306359044.0 2011-Dec-17 04:04:47 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-17 04:04:47 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-17 04:04:47 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGES3193_p3_010:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=135100006:scanid=135100006:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456359044.0:topobfreqhz=1306359044.0:filetype=1 2011-Dec-17 04:04:47 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-17 04:04:47 LOG5 begin_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2011-Dec-17 04:04:47 LOG4 from_mock: From MOCK: psetok 2011-Dec-17 04:04:47 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-17 04:04:47 LOG5 end_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2011-Dec-17 04:04:47 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-17 04:04:47 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-17 04:04:47 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-17 04:04:47 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-17 04:04:47 LOG5 begin_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2011-Dec-17 04:04:47 LOG4 from_mock: From MOCK: starok 2011-Dec-17 04:04:47 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-17 04:04:47 LOG5 end_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2011-Dec-17 04:04:47 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-17 04:04:47 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 135100006 2011-Dec-17 04:04:47 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-17 04:04:47 LOG5 begin_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2011-Dec-17 04:04:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 04:04:47 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-17 04:04:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-17 04:04:47 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-17 04:04:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29088.00 2011-Dec-17 04:04:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.359044 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 04:04:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.359044 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 04:04:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.359044 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 04:04:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.359044 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 04:04:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.359044 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 04:04:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.359044 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 04:04:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.359044 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 04:04:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.359044 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 04:04:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.359044 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 04:04:49 INFO2 got_mock_message: Mock spectrometer start file number is 00500 2011-Dec-17 04:04:49 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-17 04:04:49 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2011-Dec-17 04:04:49 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-17 04:04:49 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-17 04:04:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-17 04:04:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-17 04:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:04:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-17 04:04:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-17 04:04:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-17 04:04:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-17 04:04:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-17 04:04:49 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-17 04:04:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 04:04:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 04:04:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 04:04:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 04:04:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 04:04:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 04:04:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 04:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:04:52 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:04:52.02 2011-Dec-17 04:04:52 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324109092.02 Sat Dec 17 04:04:52 2011 2011-Dec-17 04:04:52 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-17 04:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:05:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:05:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.114 1.061 0.896 0.918 2011-Dec-17 04:05:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.890 0.983 1.053 1.099 2011-Dec-17 04:05:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.830 1.094 0.940 1.083 2011-Dec-17 04:05:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.909 0.014 0.990 0.014 2011-Dec-17 04:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:05:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 4-7 errors 2011-Dec-17 04:05:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 2-3 errors 2011-Dec-17 04:05:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 2-3 errors 2011-Dec-17 04:05:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 4-7 errors 2011-Dec-17 04:05:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 8-15 errors 2011-Dec-17 04:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-17 04:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:05:32 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 8-15 errors 2011-Dec-17 04:05:32 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 16-31 errors 2011-Dec-17 04:05:32 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 2-3 errors 2011-Dec-17 04:05:32 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 8-15 errors 2011-Dec-17 04:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 04:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 04:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:06:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:06:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.115 1.063 0.897 0.918 2011-Dec-17 04:06:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.893 0.983 1.051 1.095 2011-Dec-17 04:06:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.096 0.945 1.086 2011-Dec-17 04:06:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.912 0.014 0.994 0.014 2011-Dec-17 04:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:06:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 64-127 errors 2011-Dec-17 04:06:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 32-63 errors 2011-Dec-17 04:06:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC = 2048-4095 errors PFB = 128-255 errors 2011-Dec-17 04:06:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 32-63 errors 2011-Dec-17 04:06:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 64-127 errors 2011-Dec-17 04:06:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 32-63 errors 2011-Dec-17 04:06:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 32-63 errors 2011-Dec-17 04:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-17 04:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 04:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 04:06:20 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 32-63 errors 2011-Dec-17 04:06:20 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC = 64-127 errors PFB = 32-63 errors 2011-Dec-17 04:06:20 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 32-63 errors 2011-Dec-17 04:06:20 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 32-63 errors 2011-Dec-17 04:06:20 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 16-31 errors 2011-Dec-17 04:06:20 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC = 512-1023 errors PFB = 32-63 errors 2011-Dec-17 04:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 04:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 04:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:07:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:07:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.109 1.056 0.898 0.922 2011-Dec-17 04:07:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.898 0.988 1.050 1.096 2011-Dec-17 04:07:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.832 1.099 0.944 1.085 2011-Dec-17 04:07:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.915 0.014 0.997 0.014 2011-Dec-17 04:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 04:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:08:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:08:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.113 1.064 0.901 0.922 2011-Dec-17 04:08:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.894 0.984 1.053 1.098 2011-Dec-17 04:08:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.834 1.099 0.946 1.086 2011-Dec-17 04:08:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.014 1.004 0.014 2011-Dec-17 04:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:09:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:09:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.112 1.064 0.899 0.920 2011-Dec-17 04:09:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.894 0.985 1.052 1.096 2011-Dec-17 04:09:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.836 1.102 0.945 1.087 2011-Dec-17 04:09:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.914 0.014 0.994 0.014 2011-Dec-17 04:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:10:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:10:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.112 1.059 0.899 0.921 2011-Dec-17 04:10:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.896 0.986 1.053 1.097 2011-Dec-17 04:10:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.835 1.102 0.945 1.087 2011-Dec-17 04:10:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.914 0.014 0.996 0.014 2011-Dec-17 04:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 04:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:11:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:11:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.111 1.062 0.899 0.921 2011-Dec-17 04:11:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.897 0.987 1.055 1.098 2011-Dec-17 04:11:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.834 1.102 0.947 1.087 2011-Dec-17 04:11:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.014 0.995 0.014 2011-Dec-17 04:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:12:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:12:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.115 1.067 0.901 0.924 2011-Dec-17 04:12:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.964 1.060 1.056 1.101 2011-Dec-17 04:12:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.834 1.103 0.948 1.089 2011-Dec-17 04:12:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.915 0.014 0.996 0.014 2011-Dec-17 04:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-17 04:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-17 04:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.159 (still bad) 2011-Dec-17 04:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.170 (still bad) 2011-Dec-17 04:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.175 (still bad) 2011-Dec-17 04:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.176 (still bad) 2011-Dec-17 04:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.168 (still bad) 2011-Dec-17 04:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.157 (still bad) 2011-Dec-17 04:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-17 04:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-17 04:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:13:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:13:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.114 1.066 0.900 0.922 2011-Dec-17 04:13:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.897 0.986 1.061 1.101 2011-Dec-17 04:13:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.834 1.103 0.949 1.092 2011-Dec-17 04:13:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.918 0.014 1.000 0.014 2011-Dec-17 04:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 04:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:13:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:14:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:14:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.115 1.065 0.899 0.922 2011-Dec-17 04:14:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.898 0.985 1.056 1.098 2011-Dec-17 04:14:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.836 1.105 0.951 1.091 2011-Dec-17 04:14:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.916 0.014 0.998 0.014 2011-Dec-17 04:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:15:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:15:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.114 1.066 0.900 0.925 2011-Dec-17 04:15:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.899 0.986 1.057 1.100 2011-Dec-17 04:15:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.837 1.103 0.950 1.091 2011-Dec-17 04:15:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.918 0.014 0.999 0.014 2011-Dec-17 04:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:16:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:16:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.115 1.068 0.901 0.923 2011-Dec-17 04:16:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.898 0.984 1.062 1.105 2011-Dec-17 04:16:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.837 1.109 0.949 1.090 2011-Dec-17 04:16:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.918 0.014 1.000 0.014 2011-Dec-17 04:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:17:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:17:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.113 1.063 0.905 0.926 2011-Dec-17 04:17:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.900 0.984 1.059 1.102 2011-Dec-17 04:17:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.836 1.106 0.950 1.095 2011-Dec-17 04:17:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.014 0.999 0.014 2011-Dec-17 04:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:18:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:18:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.115 1.064 0.901 0.923 2011-Dec-17 04:18:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.899 0.983 1.059 1.100 2011-Dec-17 04:18:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.836 1.104 0.951 1.091 2011-Dec-17 04:18:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.918 0.014 1.000 0.014 2011-Dec-17 04:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:19:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:19:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.116 1.068 0.904 0.924 2011-Dec-17 04:19:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.898 0.984 1.059 1.100 2011-Dec-17 04:19:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.835 1.105 0.949 1.091 2011-Dec-17 04:19:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.920 0.014 1.001 0.014 2011-Dec-17 04:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 04:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-17 04:20:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:20:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.137 1.089 0.902 0.925 2011-Dec-17 04:20:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.898 0.985 1.064 1.104 2011-Dec-17 04:20:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.835 1.106 0.950 1.092 2011-Dec-17 04:20:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.920 0.014 1.002 0.014 2011-Dec-17 04:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-17 04:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-17 04:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-17 04:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-17 04:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-17 04:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-17 04:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-17 04:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 04:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 04:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:21:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:21:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.114 1.067 0.903 0.925 2011-Dec-17 04:21:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.897 0.984 1.060 1.102 2011-Dec-17 04:21:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.840 1.112 0.953 1.095 2011-Dec-17 04:21:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.918 0.014 1.001 0.014 2011-Dec-17 04:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 04:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:22:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:22:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.118 1.071 0.902 0.924 2011-Dec-17 04:22:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.900 0.987 1.060 1.100 2011-Dec-17 04:22:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.837 1.108 0.949 1.090 2011-Dec-17 04:22:25 LOG4 check_wapp_levels: WAPP-4 power levels: 0.919 0.014 1.001 0.014 2011-Dec-17 04:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:23:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:23:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.115 1.066 0.903 0.924 2011-Dec-17 04:23:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.900 0.987 1.063 1.103 2011-Dec-17 04:23:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.837 1.105 0.949 1.091 2011-Dec-17 04:23:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 0.014 1.010 0.014 2011-Dec-17 04:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 04:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:24:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:24:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.120 1.073 0.910 0.931 2011-Dec-17 04:24:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.899 0.986 1.061 1.102 2011-Dec-17 04:24:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.838 1.108 0.951 1.091 2011-Dec-17 04:24:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.919 0.014 1.002 0.014 2011-Dec-17 04:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 04:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 04:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:24:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 04:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:24:53 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-17 04:24:53 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-17 04:24:53 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-17 04:24:53 LOG5 end_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2011-Dec-17 04:24:53 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-17 04:24:53 LOG5 end_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2011-Dec-17 04:24:53 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-17 04:24:53 LOG5 finish_task: Level: (2) ID = <10064> Status = 0 0 0 0 ok 2011-Dec-17 04:24:53 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-17 04:24:53 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-17 04:24:53 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-17 04:24:53 LOG5 end_task: Level: (2) ID = <10064> Status = 0 0 0 0 ok 2011-Dec-17 04:24:53 COMMAND run_command_line: EXECUTING command 20: 'ENDIF' 2011-Dec-17 04:24:53 COMMAND run_command_line: EXECUTING command 23: 'IF LSTSLEW(AGES3193_p3_012) < 094341 THEN' 2011-Dec-17 04:24:53 LOG3 is_if_valid: Current source data: up 210.4 6.1 UP - - 95 1.4 2011-Dec-17 04:24:53 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_012) < 094341 2011-Dec-17 04:24:53 INFO5 is_if_valid: Condition parsed as: 9.6955523333333336 < 9.7280555555555548 2011-Dec-17 04:24:53 COMMAND run_command_line: EXECUTING command 24: 'FIXEDDRIFT az=203.77 alfaangle=-2.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_012 ra=95300.00 dec=233630.00' 2011-Dec-17 04:24:53 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-17 04:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:24:54 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-17 04:24:54 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 203.77 -2.3 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_012 95300.00 233630.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-17 04:24:54 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-17 04:24:54 LOG5 begin_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2011-Dec-17 04:24:54 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_010' 2011-Dec-17 04:24:54 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-17 04:24:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_012} 2011-Dec-17 04:24:54 INFO3 fixed_driftmap: Sending telescope to Az = 203.77 and ZA = 5.69 2011-Dec-17 04:24:54 LOG3 track_source: Calling 'track_source AGES3193_p3_012 203.77 5.6942220472 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-17 04:24:54 START begin_task: Starting task 'sending tracking commands' 2011-Dec-17 04:24:54 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2011-Dec-17 04:24:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_012} INFO {Slewing to source 'AGES3193_p3_012' ...} 2011-Dec-17 04:24:54 INFO1 track_source: Starting to track AGES3193_p3_012 2011-Dec-17 04:24:54 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_012" 2011-Dec-17 04:24:54 LOG3 vw_send: To DATATAKING: set ra 203.77 2011-Dec-17 04:24:54 LOG3 vw_send: To DATATAKING: set dec 5.6942220472 2011-Dec-17 04:24:54 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-17 04:24:54 LOG3 vw_send: To DATATAKING: pnt tr 203.77 5.6942220472 -CF 2011-Dec-17 04:24:54 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 04:24:54 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-17 04:24:54 LOG5 finish_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2011-Dec-17 04:24:54 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-17 04:24:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 04:24:54 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-17 04:24:54 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2011-Dec-17 04:24:54 START begin_task: Starting task 'rotate ALFA to -2.3 degrees' 2011-Dec-17 04:24:54 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2011-Dec-17 04:24:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -2.3 degrees ...} 2011-Dec-17 04:24:54 INFO2 rotate_alfa: ALFA commanded to -2.3 degrees 2011-Dec-17 04:24:54 LOG3 sock_errsend: To ALFAMOTOR: POSITION -2.3 REPLY 2011-Dec-17 04:24:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-17 04:24:54 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-17 04:24:54 LOG5 begin_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2011-Dec-17 04:24:54 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_012" 2011-Dec-17 04:24:54 LOG4 got_cormsg: From DATATAKING: set ra 203.77 2011-Dec-17 04:24:54 LOG4 got_cormsg: From DATATAKING: set dec 5.6942220472 2011-Dec-17 04:24:54 LOG4 got_cormsg: From DATATAKING: vw% 203.77 2011-Dec-17 04:24:54 LOG4 got_cormsg: From DATATAKING: vw% 5.6942220472 2011-Dec-17 04:24:54 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:24:54 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-17 04:24:54 LOG4 got_cormsg: From DATATAKING: pnt tr 203.77 5.6942220472 -CF 2011-Dec-17 04:24:54 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 04:24:54 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-17 04:24:54 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:25:13 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-17 04:25:13 INFO3 alfa_motor: ALFA rotator in-position -2.30 degrees 2011-Dec-17 04:25:13 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-17 04:25:13 LOG5 end_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2011-Dec-17 04:25:13 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-17 04:25:13 STOP finish_task: Finishing task 'rotate ALFA to -2.3 degrees' 2011-Dec-17 04:25:13 LOG5 finish_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2011-Dec-17 04:25:13 INFO2 finish_task: DONE finished configuration: rotating ALFA to -2.3 degrees 2011-Dec-17 04:25:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 04:25:13 STOP end_task: Finishing task 'rotate ALFA to -2.3 degrees' with status 'OK' 2011-Dec-17 04:25:13 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2011-Dec-17 04:25:13 START begin_task: Starting task 'waiting on telescope' 2011-Dec-17 04:25:13 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2011-Dec-17 04:25:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-17 04:25:13 LOG3 waittrk: Start waittrk 5 2011-Dec-17 04:25:13 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-17 04:25:13 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2011-Dec-17 04:25:18 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-17 04:25:18 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2011-Dec-17 04:25:18 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-17 04:25:18 LOG5 begin_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2011-Dec-17 04:26:33 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-17 04:26:33 LOG5 end_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2011-Dec-17 04:26:33 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-17 04:26:33 INFO2 waittrk: Now tracking AGES3193_p3_012 2011-Dec-17 04:26:33 LOG4 waittrk: Current telescope position: Az = 203.41 ZA = 5.71 2011-Dec-17 04:26:33 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-17 04:26:33 LOG5 finish_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2011-Dec-17 04:26:33 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-17 04:26:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 04:26:33 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-17 04:26:33 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2011-Dec-17 04:26:33 START begin_task: Starting task 'selecting calibration type' 2011-Dec-17 04:26:33 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2011-Dec-17 04:26:33 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-17 04:26:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-17 04:26:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 04:26:33 START begin_task: Starting task 'waiting on setcal' 2011-Dec-17 04:26:33 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2011-Dec-17 04:26:33 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-17 04:26:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 04:26:34 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:26:34 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-17 04:26:34 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-17 04:26:34 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2011-Dec-17 04:26:34 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-17 04:26:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-17 04:26:34 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-17 04:26:34 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-17 04:26:34 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2011-Dec-17 04:26:34 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:26:34 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-17 04:26:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-17 04:26:34 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2011-Dec-17 04:26:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-17 04:26:34 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-17 04:26:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-17 04:26:34 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-17 04:26:34 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-17 04:26:34 LOG5 begin_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2011-Dec-17 04:26:34 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-17 04:26:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-17 04:26:34 LOG5 end_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2011-Dec-17 04:26:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-17 04:26:34 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-17 04:26:34 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-17 04:26:34 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2011-Dec-17 04:26:34 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Dec-17 04:26:34 INFO2 astwait: Waiting for 40 seconds from 08:26:34 to 08:27:14 UTC ... 2011-Dec-17 04:26:34 LOG4 send_obs_status: To obs_status: <1> TASKTIME 40 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-17 04:26:34 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Dec-17 04:26:34 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2011-Dec-17 04:27:14 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Dec-17 04:27:14 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2011-Dec-17 04:27:14 INFO3 astwait: Finished waiting 2011-Dec-17 04:27:14 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-17 04:27:14 LOG5 dopset_later: Calling 'dopset_later 60.568775194618304' 2011-Dec-17 04:27:14 INFO3 dopset_later: Setting Doppler correction for 04:28:14 (60.6 seconds from now) 2011-Dec-17 04:27:14 LOG5 antvel: Calling 'antvel 203.770000 5.694222 F Heliocentric 60.568775194618304' 2011-Dec-17 04:27:14 LOG2 antvel: Transforming current Az = 203.77 ZA = 5.69 to apparent RA = 09:53:42.0 Dec = +23:32:52.0 2011-Dec-17 04:27:14 LOG2 antvel: Parameters to Doppler: Heliocentric 30494 2011 351 0.0 2011-Dec-17 04:27:14 INFO5 antvel: Computed antenna velocity: -25.05453 km/s 2011-Dec-17 04:27:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-25.054529172700001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-17 04:27:14 INFO4 dopset_gen: New sky frequencies: 1381.358873 1381.358873 1381.358873 1381.358873 1381.358873 1381.358873 1381.358873 1381.358873 1381.358873 2011-Dec-17 04:27:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.358873 sky0=1381.358873 sky1=1381.358873 sky2=1381.358873 sky3=1381.358873 sky4=1381.358873 sky5=1381.358873 sky6=1381.358873 sky7=1381.358873 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-17 04:27:14 LOG2 dopset_gen: Result from 'sky2syn': 1631.358873 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-17 04:27:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631358873.0} 2011-Dec-17 04:27:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 04:27:14 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-17 04:27:14 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-17 04:27:14 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:04.0 Dec = +23:36:15.6 2011-Dec-17 04:27:14 LOG3 track_source: Calling 'track_source AGES3193_p3_012 095204.0 233615.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-17 04:27:14 START begin_task: Starting task 'sending tracking commands' 2011-Dec-17 04:27:14 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2011-Dec-17 04:27:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_012} INFO {Slewing to source 'AGES3193_p3_012' ...} 2011-Dec-17 04:27:14 INFO1 track_source: Starting to track AGES3193_p3_012 2011-Dec-17 04:27:14 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_012" 2011-Dec-17 04:27:14 LOG3 vw_send: To DATATAKING: set ra 095204.0 2011-Dec-17 04:27:14 LOG3 vw_send: To DATATAKING: set dec 233615.6 2011-Dec-17 04:27:14 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-17 04:27:14 LOG3 vw_send: To DATATAKING: pnt tr 095204.0 233615.6 -CJ 2011-Dec-17 04:27:14 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 04:27:14 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-17 04:27:14 LOG5 finish_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2011-Dec-17 04:27:14 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-17 04:27:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 04:27:14 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-17 04:27:14 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2011-Dec-17 04:27:14 START begin_task: Starting task 'waiting on telescope' 2011-Dec-17 04:27:14 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2011-Dec-17 04:27:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-17 04:27:14 LOG3 waittrk: Start waittrk 5 2011-Dec-17 04:27:14 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-17 04:27:14 LOG5 begin_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2011-Dec-17 04:27:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631358873.0} 2011-Dec-17 04:27:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 04:27:14 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_012" 2011-Dec-17 04:27:14 LOG4 got_cormsg: From DATATAKING: set ra 095204.0 2011-Dec-17 04:27:14 LOG4 got_cormsg: From DATATAKING: set dec 233615.6 2011-Dec-17 04:27:14 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-17 04:27:14 LOG4 got_cormsg: From DATATAKING: vw% 095204.0 2011-Dec-17 04:27:14 LOG4 got_cormsg: From DATATAKING: vw% 233615.6 2011-Dec-17 04:27:14 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:27:14 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-17 04:27:14 LOG4 got_cormsg: From DATATAKING: pnt tr 095204.0 233615.6 -CJ 2011-Dec-17 04:27:14 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 04:27:14 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-17 04:27:14 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:27:19 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-17 04:27:19 LOG5 end_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2011-Dec-17 04:27:19 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-17 04:27:19 LOG5 begin_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2011-Dec-17 04:27:21 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-17 04:27:21 LOG5 end_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2011-Dec-17 04:27:21 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-17 04:27:21 INFO2 waittrk: Now tracking AGES3193_p3_012 2011-Dec-17 04:27:21 LOG4 waittrk: Current telescope position: Az = 203.28 ZA = 5.70 2011-Dec-17 04:27:21 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-17 04:27:21 LOG5 finish_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2011-Dec-17 04:27:21 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-17 04:27:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 04:27:21 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-17 04:27:21 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2011-Dec-17 04:27:21 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-17 04:27:21 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2011-Dec-17 04:27:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-17 04:27:21 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-17 04:27:21 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-17 04:27:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-17 04:27:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 04:27:21 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-17 04:27:21 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2011-Dec-17 04:27:22 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-17 04:27:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 04:27:24 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:27:24 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-17 04:27:24 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-17 04:27:24 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2011-Dec-17 04:27:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-17 04:27:24 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-17 04:27:24 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2011-Dec-17 04:27:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-17 04:27:24 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-17 04:27:24 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-17 04:27:24 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-17 04:27:24 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-17 04:27:25 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-17 04:27:25 LOG5 begin_task: Level: (5) ID = <10126> Status = 0 0 0 0 ok 2011-Dec-17 04:27:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-17 04:27:25 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:27:25 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 7 6 dB 2011-Dec-17 04:27:25 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 3 dB 2011-Dec-17 04:27:25 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 4 dB --- beam 3: 2 2 dB 2011-Dec-17 04:27:25 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2011-Dec-17 04:27:25 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-17 04:27:25 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-17 04:27:25 LOG5 end_task: Level: (5) ID = <10126> Status = 0 0 0 0 ok 2011-Dec-17 04:27:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.075 1.054 ALFA beam 1: 1.113 0.916 2011-Dec-17 04:27:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.108 0.980 ALFA beam 3: 1.032 1.097 2011-Dec-17 04:27:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.831 1.087 ALFA beam 5: 0.909 1.047 2011-Dec-17 04:27:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.070 0.014 ALFA beam 7: 0.931 0.014 2011-Dec-17 04:27:25 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-17 04:27:25 LOG5 finish_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2011-Dec-17 04:27:25 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-17 04:27:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 04:27:25 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-17 04:27:25 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2011-Dec-17 04:27:25 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-17 04:27:25 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2011-Dec-17 04:27:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-17 04:27:25 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-17 04:27:25 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-17 04:27:25 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-17 04:27:25 LOG5 begin_task: Level: (5) ID = <10128> Status = 0 0 0 0 ok 2011-Dec-17 04:27:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:27:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 1.054 1.113 0.916 2011-Dec-17 04:27:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.108 0.980 1.032 1.097 2011-Dec-17 04:27:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.831 1.087 0.909 1.047 2011-Dec-17 04:27:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.070 0.014 0.931 0.014 2011-Dec-17 04:27:31 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.2 27.4 B 30.0 30.1 mn:A -0.0 -0.1 B -0.4 -0.3 gn: 11 11 2011-Dec-17 04:27:31 INFO3 from_mock: From MOCK: b0s1g0 rms:A 49.6 48.8 B 31.0 32.9 mn:A -0.3 -0.8 B -0.5 0.1 gn: 12 11 2011-Dec-17 04:27:31 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.1 28.2 B 33.0 28.9 mn:A 0.5 0.7 B 0.1 -0.1 gn: 7 11 2011-Dec-17 04:27:31 INFO3 from_mock: From MOCK: b1s1g0 rms:A 40.1 37.0 B 34.2 34.3 mn:A -0.3 -0.3 B 0.6 0.2 gn: 8 10 2011-Dec-17 04:27:31 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.7 30.8 B 28.1 29.4 mn:A -0.0 -0.4 B 0.4 0.1 gn: 11 11 2011-Dec-17 04:27:31 INFO3 from_mock: From MOCK: b2s1g0 rms:A 45.5 46.2 B 43.9 41.0 mn:A 0.1 -0.5 B 0.1 0.2 gn: 11 12 2011-Dec-17 04:27:31 INFO3 from_mock: From MOCK: b3s0g0 rms:A 28.8 28.6 B 31.0 27.7 mn:A 0.4 -0.3 B 0.1 -0.3 gn: 12 12 2011-Dec-17 04:27:31 INFO3 from_mock: From MOCK: b3s1g0 rms:A 48.7 48.4 B 39.8 41.5 mn:A -0.5 -0.1 B 0.1 0.1 gn: 12 12 2011-Dec-17 04:27:31 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.4 29.5 B 31.4 31.5 mn:A -0.2 -0.3 B -0.4 -0.1 gn: 13 12 2011-Dec-17 04:27:31 INFO3 from_mock: From MOCK: b4s1g0 rms:A 50.0 47.3 B 41.3 39.9 mn:A -0.5 -0.3 B -0.4 0.1 gn: 16 13 2011-Dec-17 04:27:31 INFO3 from_mock: From MOCK: b5s0g0 rms:A 32.3 31.1 B 29.8 29.8 mn:A 0.4 0.4 B -0.1 0.4 gn: 13 11 2011-Dec-17 04:27:31 INFO3 from_mock: From MOCK: b5s1g0 rms:A 47.8 47.8 B 43.7 43.6 mn:A -0.8 -0.2 B -0.1 0.1 gn: 12 11 2011-Dec-17 04:27:31 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.3 29.6 B 14.1 14.6 mn:A -0.5 0.2 B 0.4 -0.5 gn: 13 31 2011-Dec-17 04:27:31 INFO3 from_mock: From MOCK: b6s1g0 rms:A 43.3 39.4 B 11.2 10.8 mn:A 0.7 0.5 B 0.1 0.1 gn: 14 31 2011-Dec-17 04:27:31 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-17 04:27:31 LOG5 end_task: Level: (5) ID = <10128> Status = 0 0 0 0 ok 2011-Dec-17 04:27:31 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-17 04:27:31 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-17 04:27:31 LOG5 finish_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2011-Dec-17 04:27:31 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-17 04:27:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 04:27:31 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-17 04:27:31 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2011-Dec-17 04:27:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-17 04:27:31 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-17 04:27:31 LOG5 finish_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2011-Dec-17 04:27:31 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-17 04:27:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 04:27:31 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-17 04:27:31 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2011-Dec-17 04:27:31 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel Cabrera 2011-Dec-17 04:27:31 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel Cabrera 2011-Dec-17 04:27:31 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel Cabrera 2011-Dec-17 04:27:31 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel Cabrera 2011-Dec-17 04:27:31 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-17 04:27:31 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-17 04:27:31 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2011-Dec-17 04:27:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-17 04:27:31 START begin_task: Starting task 'selecting calibration type' 2011-Dec-17 04:27:31 LOG5 begin_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2011-Dec-17 04:27:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-17 04:27:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-17 04:27:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 04:27:31 START begin_task: Starting task 'waiting on setcal' 2011-Dec-17 04:27:31 LOG5 begin_task: Level: (5) ID = <10131> Status = 0 0 0 0 ok 2011-Dec-17 04:27:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2011-Dec-17 04:27:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-17 04:27:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 04:27:32 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:27:32 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-17 04:27:32 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-17 04:27:32 LOG5 end_task: Level: (5) ID = <10131> Status = 0 0 0 0 ok 2011-Dec-17 04:27:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-17 04:27:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-17 04:27:32 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-17 04:27:32 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-17 04:27:32 LOG5 begin_task: Level: (5) ID = <10132> Status = 0 0 0 0 ok 2011-Dec-17 04:27:32 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:27:32 NOTE WAPPDATA-new_file: New FITS file: wapp.20111217.a2048.0002.fits 2011-Dec-17 04:27:32 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111217.a2048.0002.fits} 2011-Dec-17 04:27:33 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-17 04:27:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-17 04:27:33 LOG5 end_task: Level: (5) ID = <10132> Status = 0 0 0 0 ok 2011-Dec-17 04:27:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-17 04:27:33 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-17 04:27:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-17 04:27:33 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-17 04:27:33 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-17 04:27:33 LOG5 begin_task: Level: (5) ID = <10133> Status = 0 0 0 0 ok 2011-Dec-17 04:27:33 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-17 04:27:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-17 04:27:33 LOG5 end_task: Level: (5) ID = <10133> Status = 0 0 0 0 ok 2011-Dec-17 04:27:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-17 04:27:33 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-17 04:27:33 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-17 04:27:33 LOG5 end_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2011-Dec-17 04:27:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-17 04:27:33 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-17 04:27:33 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-17 04:27:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-17 04:27:33 LOG5 begin_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2011-Dec-17 04:27:33 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-17 04:27:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-17 04:27:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-17 04:27:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-17 04:27:33 LOG5 end_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2011-Dec-17 04:27:33 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-17 04:27:33 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-17 04:27:33 LOG5 begin_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2011-Dec-17 04:27:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-17 04:27:33 LOG5 log_alfabeam: Parameters: 9.8677777777777784 23.604333333333336 9.717063 2011.9614943151571 -2.300074 2011-Dec-17 04:27:33 LOG4 log_alfabeam: ALFABEAM 0 9.867777777777770 23.604333333333336 2011-Dec-17 04:27:33 LOG4 log_alfabeam: ALFABEAM 1 9.868297665695579 23.502225891621144 2011-Dec-17 04:27:33 LOG4 log_alfabeam: ALFABEAM 2 9.873955615596929 23.570368046832055 2011-Dec-17 04:27:33 LOG4 log_alfabeam: ALFABEAM 3 9.873441773557225 23.672868985252915 2011-Dec-17 04:27:33 LOG4 log_alfabeam: ALFABEAM 4 9.867141621952394 23.706687097100321 2011-Dec-17 04:27:33 LOG4 log_alfabeam: ALFABEAM 5 9.861562523162345 23.636847202648688 2011-Dec-17 04:27:33 LOG4 log_alfabeam: ALFABEAM 6 9.862204107976089 23.534887991337413 2011-Dec-17 04:27:33 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-17 04:27:33 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-17 04:27:33 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Dec-17 04:27:33 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_012 2011-Dec-17 04:27:33 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-17 04:27:33 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-17 04:27:33 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-17 04:27:33 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-17 04:27:33 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-17 04:27:33 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-17 04:27:33 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-17 04:27:33 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-17 04:27:33 LOG3 take_mock_data: PSET configuration: patternid=135100006 2011-Dec-17 04:27:33 LOG3 take_mock_data: PSET configuration: scanid=135100007 2011-Dec-17 04:27:33 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-17 04:27:33 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-17 04:27:33 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-17 04:27:33 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456358873.0 2011-Dec-17 04:27:33 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306358873.0 2011-Dec-17 04:27:33 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-17 04:27:33 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-17 04:27:33 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGES3193_p3_012:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=135100006:scanid=135100007:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456358873.0:topobfreqhz=1306358873.0:filetype=1 2011-Dec-17 04:27:33 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-17 04:27:33 LOG5 begin_task: Level: (5) ID = <10136> Status = 0 0 0 0 ok 2011-Dec-17 04:27:33 LOG4 from_mock: From MOCK: psetok 2011-Dec-17 04:27:33 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-17 04:27:33 LOG5 end_task: Level: (5) ID = <10136> Status = 0 0 0 0 ok 2011-Dec-17 04:27:33 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-17 04:27:33 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-17 04:27:33 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-17 04:27:33 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-17 04:27:33 LOG5 begin_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2011-Dec-17 04:27:33 LOG4 from_mock: From MOCK: starok 2011-Dec-17 04:27:33 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-17 04:27:33 LOG5 end_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2011-Dec-17 04:27:33 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-17 04:27:33 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135100007 2011-Dec-17 04:27:34 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-17 04:27:34 LOG5 begin_task: Level: (5) ID = <10138> Status = 0 0 0 0 ok 2011-Dec-17 04:27:34 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-17 04:27:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 04:27:34 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-17 04:27:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-17 04:27:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30455.00 2011-Dec-17 04:27:35 INFO2 got_mock_message: Mock spectrometer start file number is 00600 2011-Dec-17 04:27:35 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-17 04:27:35 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-17 04:27:35 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-17 04:27:35 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-17 04:27:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-17 04:27:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-17 04:27:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-17 04:27:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-17 04:27:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-17 04:27:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-17 04:27:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-17 04:27:35 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-17 04:27:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:27:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:27:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:27:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:27:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:27:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:27:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:27:37 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:27:38.00 2011-Dec-17 04:27:38 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324110458.00 Sat Dec 17 04:27:38 2011 2011-Dec-17 04:27:38 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-17 04:27:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.358873 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 04:27:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.358873 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 04:27:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.358873 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 04:27:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.358873 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 04:27:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.358873 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 04:27:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.358873 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 04:27:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.358873 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 04:27:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.358873 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 04:27:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.358873 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 04:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.550 (still bad) 2011-Dec-17 04:27:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 04:27:43 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-17 04:27:44 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-17 04:27:44 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-17 04:27:44 LOG5 end_task: Level: (5) ID = <10138> Status = 0 0 0 0 ok 2011-Dec-17 04:27:44 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-17 04:27:44 LOG5 end_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2011-Dec-17 04:27:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-17 04:27:44 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-17 04:27:44 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-17 04:27:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-17 04:27:44 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2011-Dec-17 04:27:44 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-17 04:27:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-17 04:27:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-17 04:27:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-17 04:27:44 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2011-Dec-17 04:27:44 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-17 04:27:44 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-17 04:27:44 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2011-Dec-17 04:27:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-17 04:27:44 LOG5 log_alfabeam: Parameters: 9.8677777777777784 23.604333333333336 9.719849 2011.961494632038 -2.300074 2011-Dec-17 04:27:44 LOG4 log_alfabeam: ALFABEAM 0 9.867777777777766 23.604333333333344 2011-Dec-17 04:27:44 LOG4 log_alfabeam: ALFABEAM 1 9.868345462177420 23.502274542085235 2011-Dec-17 04:27:44 LOG4 log_alfabeam: ALFABEAM 2 9.873971415469590 23.570915538318214 2011-Dec-17 04:27:44 LOG4 log_alfabeam: ALFABEAM 3 9.873409545192185 23.673369425980216 2011-Dec-17 04:27:44 LOG4 log_alfabeam: ALFABEAM 4 9.867093318797366 23.706628764115798 2011-Dec-17 04:27:44 LOG4 log_alfabeam: ALFABEAM 5 9.861547331941779 23.636292558610737 2011-Dec-17 04:27:44 LOG4 log_alfabeam: ALFABEAM 6 9.862236983040500 23.534393227814277 2011-Dec-17 04:27:44 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-17 04:27:44 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-17 04:27:44 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Dec-17 04:27:44 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_012 2011-Dec-17 04:27:44 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-17 04:27:44 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-17 04:27:44 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-17 04:27:44 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-17 04:27:44 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-17 04:27:44 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-17 04:27:44 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-17 04:27:44 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-17 04:27:44 LOG3 take_mock_data: PSET configuration: patternid=135100006 2011-Dec-17 04:27:44 LOG3 take_mock_data: PSET configuration: scanid=135100008 2011-Dec-17 04:27:44 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-17 04:27:44 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-17 04:27:44 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-17 04:27:44 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456358873.0 2011-Dec-17 04:27:44 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306358873.0 2011-Dec-17 04:27:44 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-17 04:27:44 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-17 04:27:44 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGES3193_p3_012:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=135100006:scanid=135100008:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456358873.0:topobfreqhz=1306358873.0:filetype=1 2011-Dec-17 04:27:44 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-17 04:27:44 LOG5 begin_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2011-Dec-17 04:27:44 LOG4 from_mock: From MOCK: psetok 2011-Dec-17 04:27:44 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-17 04:27:44 LOG5 end_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2011-Dec-17 04:27:44 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-17 04:27:44 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-17 04:27:44 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-17 04:27:44 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-17 04:27:44 LOG5 begin_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2011-Dec-17 04:27:44 LOG4 from_mock: From MOCK: starok 2011-Dec-17 04:27:44 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-17 04:27:44 LOG5 end_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2011-Dec-17 04:27:44 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-17 04:27:44 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135100008 2011-Dec-17 04:27:44 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-17 04:27:44 LOG5 begin_task: Level: (5) ID = <10143> Status = 0 0 0 0 ok 2011-Dec-17 04:27:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 04:27:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-17 04:27:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30465.00 2011-Dec-17 04:27:45 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-17 04:27:45 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-17 04:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.550 (still bad) 2011-Dec-17 04:27:47 INFO2 got_mock_message: Mock spectrometer start file number is 00700 2011-Dec-17 04:27:47 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-17 04:27:47 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-17 04:27:47 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-17 04:27:47 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-17 04:27:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-17 04:27:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-17 04:27:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-17 04:27:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-17 04:27:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-17 04:27:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-17 04:27:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-17 04:27:47 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-17 04:27:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:27:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:27:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:27:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:27:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:27:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:27:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:27:50 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:27:50.01 2011-Dec-17 04:27:50 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324110470.01 Sat Dec 17 04:27:50 2011 2011-Dec-17 04:27:50 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-17 04:27:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.358873 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 04:27:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.358873 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 04:27:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.358873 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 04:27:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.358873 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 04:27:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.358873 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 04:27:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.358873 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 04:27:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.358873 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 04:27:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.358873 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 04:27:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.358873 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 04:27:50 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-17 04:27:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 04:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:27:55 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-17 04:27:56 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-17 04:27:56 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-17 04:27:56 LOG5 end_task: Level: (5) ID = <10143> Status = 0 0 0 0 ok 2011-Dec-17 04:27:56 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-17 04:27:56 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2011-Dec-17 04:27:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-17 04:27:56 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-17 04:27:56 LOG5 finish_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2011-Dec-17 04:27:56 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-17 04:27:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 04:27:56 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-17 04:27:56 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2011-Dec-17 04:27:56 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-17 04:27:56 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 203.77 and ZA = 5.69 2011-Dec-17 04:27:56 LOG3 track_source: Calling 'track_source AGES3193_p3_012 203.77 5.6942220472 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-17 04:27:56 START begin_task: Starting task 'sending tracking commands' 2011-Dec-17 04:27:56 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2011-Dec-17 04:27:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_012} INFO {Slewing to source 'AGES3193_p3_012' ...} 2011-Dec-17 04:27:56 INFO1 track_source: Starting to track AGES3193_p3_012 2011-Dec-17 04:27:56 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_012" 2011-Dec-17 04:27:56 LOG3 vw_send: To DATATAKING: set ra 203.77 2011-Dec-17 04:27:56 LOG3 vw_send: To DATATAKING: set dec 5.6942220472 2011-Dec-17 04:27:56 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-17 04:27:56 LOG3 vw_send: To DATATAKING: pnt tr 203.77 5.6942220472 -CF 2011-Dec-17 04:27:56 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 04:27:56 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-17 04:27:56 LOG5 finish_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2011-Dec-17 04:27:56 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-17 04:27:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 04:27:56 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-17 04:27:56 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2011-Dec-17 04:27:56 LOG1 fixed_driftmap: Parameters: HA = -00:10:00.1 Start = 09:43:42.1 LST = 09:43:23.5 diff = 18.6 secs 2011-Dec-17 04:27:56 INFO2 fixed_driftmap: Waiting 16.6 seconds for RA 9:53:42 2011-Dec-17 04:27:56 INFO2 lstwait: Waiting for 16.6 secs from LST 09:43:23 to LST 09:43:40 ... 2011-Dec-17 04:27:56 LOG4 send_obs_status: To obs_status: <1> TASKTIME 16.576420783741231 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-17 04:27:56 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-17 04:27:56 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2011-Dec-17 04:27:56 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_012" 2011-Dec-17 04:27:56 LOG4 got_cormsg: From DATATAKING: set ra 203.77 2011-Dec-17 04:27:56 LOG4 got_cormsg: From DATATAKING: set dec 5.6942220472 2011-Dec-17 04:27:56 LOG4 got_cormsg: From DATATAKING: vw% 203.77 2011-Dec-17 04:27:56 LOG4 got_cormsg: From DATATAKING: vw% 5.6942220472 2011-Dec-17 04:27:56 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:27:56 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-17 04:27:56 LOG4 got_cormsg: From DATATAKING: pnt tr 203.77 5.6942220472 -CF 2011-Dec-17 04:27:56 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 04:27:56 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-17 04:27:56 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:28:13 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-17 04:28:13 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2011-Dec-17 04:28:13 LOG4 lstwait: Finished waiting 0.42 seconds late 2011-Dec-17 04:28:13 INFO3 lstwait: Finished waiting 2011-Dec-17 04:28:13 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-17 04:28:13 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-17 04:28:13 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-17 04:28:13 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-17 04:28:13 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-17 04:28:13 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-17 04:28:13 LOG5 begin_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2011-Dec-17 04:28:13 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-17 04:28:13 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-17 04:28:13 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-17 04:28:13 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-17 04:28:13 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Dec-17 04:28:13 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_012 2011-Dec-17 04:28:13 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-17 04:28:13 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-17 04:28:13 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-17 04:28:13 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-17 04:28:13 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-17 04:28:13 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-17 04:28:13 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-17 04:28:13 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-17 04:28:13 LOG3 take_mock_data: PSET configuration: patternid=135100009 2011-Dec-17 04:28:13 LOG3 take_mock_data: PSET configuration: scanid=135100009 2011-Dec-17 04:28:13 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-17 04:28:13 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-17 04:28:13 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-17 04:28:13 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456358873.0 2011-Dec-17 04:28:13 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306358873.0 2011-Dec-17 04:28:13 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-17 04:28:13 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-17 04:28:13 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGES3193_p3_012:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=135100009:scanid=135100009:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456358873.0:topobfreqhz=1306358873.0:filetype=1 2011-Dec-17 04:28:13 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-17 04:28:13 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2011-Dec-17 04:28:13 LOG4 from_mock: From MOCK: psetok 2011-Dec-17 04:28:13 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-17 04:28:13 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2011-Dec-17 04:28:13 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-17 04:28:13 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-17 04:28:13 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-17 04:28:13 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-17 04:28:13 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2011-Dec-17 04:28:13 LOG4 from_mock: From MOCK: starok 2011-Dec-17 04:28:13 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-17 04:28:13 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2011-Dec-17 04:28:13 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-17 04:28:13 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 135100009 2011-Dec-17 04:28:13 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-17 04:28:13 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2011-Dec-17 04:28:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 04:28:13 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-17 04:28:13 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-17 04:28:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-17 04:28:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30494.00 2011-Dec-17 04:28:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.358873 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 04:28:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.358873 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 04:28:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.358873 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 04:28:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.358873 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 04:28:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.358873 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 04:28:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.358873 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 04:28:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.358873 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 04:28:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.358873 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 04:28:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.358873 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 04:28:15 INFO2 got_mock_message: Mock spectrometer start file number is 00800 2011-Dec-17 04:28:15 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-17 04:28:15 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2011-Dec-17 04:28:15 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-17 04:28:15 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-17 04:28:15 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-17 04:28:15 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-17 04:28:15 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-17 04:28:15 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-17 04:28:15 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-17 04:28:15 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-17 04:28:15 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-17 04:28:15 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-17 04:28:15 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 04:28:15 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 04:28:15 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 04:28:15 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 04:28:15 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 04:28:15 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 04:28:15 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 04:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:28:17 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:28:18.00 2011-Dec-17 04:28:18 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324110498.00 Sat Dec 17 04:28:18 2011 2011-Dec-17 04:28:18 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-17 04:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 04:28:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:28:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.088 1.064 1.119 0.916 2011-Dec-17 04:28:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.108 0.981 1.036 1.101 2011-Dec-17 04:28:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.833 1.090 0.913 1.045 2011-Dec-17 04:28:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.071 0.014 0.931 0.014 2011-Dec-17 04:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 04:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 04:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:29:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:29:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.055 1.119 0.920 2011-Dec-17 04:29:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.109 0.986 1.035 1.102 2011-Dec-17 04:29:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.833 1.092 0.915 1.049 2011-Dec-17 04:29:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.072 0.014 0.932 0.014 2011-Dec-17 04:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 04:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 04:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 04:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 04:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:30:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:30:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.056 1.120 0.919 2011-Dec-17 04:30:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.116 0.988 1.037 1.101 2011-Dec-17 04:30:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.832 1.091 0.913 1.048 2011-Dec-17 04:30:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.073 0.014 0.934 0.014 2011-Dec-17 04:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-17 04:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-17 04:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-17 04:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-17 04:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-17 04:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-17 04:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:31:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:31:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.053 1.120 0.919 2011-Dec-17 04:31:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.112 0.981 1.040 1.105 2011-Dec-17 04:31:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.833 1.091 0.920 1.056 2011-Dec-17 04:31:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.090 0.014 0.948 0.014 2011-Dec-17 04:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 04:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 04:32:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:32:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 1.053 1.120 0.918 2011-Dec-17 04:32:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.112 0.983 1.037 1.100 2011-Dec-17 04:32:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.832 1.091 0.915 1.049 2011-Dec-17 04:32:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.071 0.014 0.932 0.014 2011-Dec-17 04:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 04:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 04:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 04:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 04:33:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:33:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.057 1.120 0.916 2011-Dec-17 04:33:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.110 0.983 1.038 1.101 2011-Dec-17 04:33:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.834 1.093 0.917 1.051 2011-Dec-17 04:33:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.074 0.014 0.935 0.014 2011-Dec-17 04:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 04:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 04:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 04:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 04:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:34:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:34:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.056 1.119 0.919 2011-Dec-17 04:34:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.110 0.983 1.038 1.103 2011-Dec-17 04:34:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.834 1.092 0.914 1.049 2011-Dec-17 04:34:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.073 0.014 0.933 0.014 2011-Dec-17 04:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 04:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 04:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 04:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 04:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:35:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:35:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.058 1.118 0.918 2011-Dec-17 04:35:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.119 0.990 1.045 1.111 2011-Dec-17 04:35:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.833 1.091 0.913 1.050 2011-Dec-17 04:35:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.073 0.014 0.934 0.014 2011-Dec-17 04:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-17 04:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-17 04:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.155 (still bad) 2011-Dec-17 04:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-17 04:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-17 04:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-17 04:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-17 04:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-17 04:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:36:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:36:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.054 1.122 0.918 2011-Dec-17 04:36:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.107 0.983 1.043 1.107 2011-Dec-17 04:36:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.835 1.094 0.920 1.059 2011-Dec-17 04:36:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.073 0.014 0.934 0.014 2011-Dec-17 04:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 04:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:37:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:37:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.057 1.120 0.918 2011-Dec-17 04:37:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.110 0.984 1.040 1.103 2011-Dec-17 04:37:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.835 1.093 0.916 1.050 2011-Dec-17 04:37:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.070 0.014 0.933 0.014 2011-Dec-17 04:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:38:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:38:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.051 1.121 0.918 2011-Dec-17 04:38:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.111 0.982 1.039 1.102 2011-Dec-17 04:38:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.833 1.092 0.913 1.051 2011-Dec-17 04:38:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.071 0.014 0.934 0.014 2011-Dec-17 04:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:39:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:39:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 1.053 1.119 0.918 2011-Dec-17 04:39:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.111 0.981 1.041 1.104 2011-Dec-17 04:39:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.835 1.096 0.915 1.053 2011-Dec-17 04:39:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.071 0.014 0.935 0.014 2011-Dec-17 04:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 04:40:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:40:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.058 1.127 0.923 2011-Dec-17 04:40:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.110 0.984 1.040 1.103 2011-Dec-17 04:40:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.834 1.094 0.915 1.053 2011-Dec-17 04:40:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.072 0.014 0.934 0.014 2011-Dec-17 04:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-17 04:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-17 04:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-17 04:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 04:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:41:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:41:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.059 1.122 0.918 2011-Dec-17 04:41:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.113 0.985 1.041 1.104 2011-Dec-17 04:41:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.834 1.093 0.917 1.054 2011-Dec-17 04:41:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.075 0.014 0.937 0.014 2011-Dec-17 04:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 04:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 04:42:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:42:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.084 1.066 1.127 0.922 2011-Dec-17 04:42:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.113 0.984 1.042 1.104 2011-Dec-17 04:42:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.835 1.094 0.920 1.057 2011-Dec-17 04:42:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.075 0.014 0.936 0.014 2011-Dec-17 04:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 04:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-17 04:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-17 04:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-17 04:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-17 04:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-17 04:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-17 04:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:43:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:43:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.059 1.123 0.919 2011-Dec-17 04:43:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.116 0.987 1.046 1.109 2011-Dec-17 04:43:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.836 1.097 0.919 1.053 2011-Dec-17 04:43:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.076 0.014 0.937 0.014 2011-Dec-17 04:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:44:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:44:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.060 1.122 0.919 2011-Dec-17 04:44:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.111 0.985 1.041 1.106 2011-Dec-17 04:44:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.835 1.096 0.913 1.056 2011-Dec-17 04:44:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.074 0.014 0.937 0.014 2011-Dec-17 04:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 04:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:45:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:45:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.054 1.124 0.920 2011-Dec-17 04:45:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.115 0.985 1.040 1.105 2011-Dec-17 04:45:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.833 1.095 0.915 1.053 2011-Dec-17 04:45:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.072 0.014 0.936 0.014 2011-Dec-17 04:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:46:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:46:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.055 1.122 0.917 2011-Dec-17 04:46:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.117 0.985 1.043 1.107 2011-Dec-17 04:46:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.833 1.095 0.918 1.055 2011-Dec-17 04:46:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.074 0.014 0.935 0.014 2011-Dec-17 04:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 04:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 04:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 04:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 04:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:47:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:47:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.058 1.127 0.923 2011-Dec-17 04:47:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.111 0.986 1.041 1.106 2011-Dec-17 04:47:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.834 1.094 0.916 1.053 2011-Dec-17 04:47:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.073 0.014 0.935 0.014 2011-Dec-17 04:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-17 04:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 04:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 04:48:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 04:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 04:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 04:48:19 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-17 04:48:19 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-17 04:48:19 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-17 04:48:19 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2011-Dec-17 04:48:19 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-17 04:48:19 LOG5 end_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2011-Dec-17 04:48:19 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-17 04:48:19 LOG5 finish_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2011-Dec-17 04:48:19 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-17 04:48:19 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-17 04:48:19 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-17 04:48:19 LOG5 end_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2011-Dec-17 04:48:19 COMMAND run_command_line: EXECUTING command 27: 'ENDIF' 2011-Dec-17 04:48:19 COMMAND run_command_line: EXECUTING command 30: 'IF LSTSLEW(AGES3193_p3_014) < 100941 THEN' 2011-Dec-17 04:48:19 LOG3 is_if_valid: Current source data: up 155.7 5.7 UP - - 71 2.0 2011-Dec-17 04:48:19 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_014) < 100941 2011-Dec-17 04:48:19 INFO5 is_if_valid: Condition parsed as: 10.097176333333334 < 10.161388888888888 2011-Dec-17 04:48:19 COMMAND run_command_line: EXECUTING command 31: 'FIXEDDRIFT az=144.70 alfaangle=51.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_014 ra=95300.00 dec=233330.00' 2011-Dec-17 04:48:19 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-17 04:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 04:48:20 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-17 04:48:20 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 144.70 51.7 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_014 95300.00 233330.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-17 04:48:20 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-17 04:48:20 LOG5 begin_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2011-Dec-17 04:48:20 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_012' 2011-Dec-17 04:48:20 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-17 04:48:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_014} 2011-Dec-17 04:48:20 INFO3 fixed_driftmap: Sending telescope to Az = 144.70 and ZA = 6.36 2011-Dec-17 04:48:20 LOG3 track_source: Calling 'track_source AGES3193_p3_014 144.70 6.3568011505 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-17 04:48:20 START begin_task: Starting task 'sending tracking commands' 2011-Dec-17 04:48:20 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2011-Dec-17 04:48:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_014} INFO {Slewing to source 'AGES3193_p3_014' ...} 2011-Dec-17 04:48:20 INFO1 track_source: Starting to track AGES3193_p3_014 2011-Dec-17 04:48:20 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_014" 2011-Dec-17 04:48:20 LOG3 vw_send: To DATATAKING: set ra 144.70 2011-Dec-17 04:48:20 LOG3 vw_send: To DATATAKING: set dec 6.3568011505 2011-Dec-17 04:48:20 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-17 04:48:20 LOG3 vw_send: To DATATAKING: pnt tr 144.70 6.3568011505 -CF 2011-Dec-17 04:48:20 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 04:48:20 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-17 04:48:20 LOG5 finish_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2011-Dec-17 04:48:20 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-17 04:48:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 04:48:20 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-17 04:48:20 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2011-Dec-17 04:48:20 START begin_task: Starting task 'rotate ALFA to +51.7 degrees' 2011-Dec-17 04:48:20 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2011-Dec-17 04:48:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +51.7 degrees ...} 2011-Dec-17 04:48:20 INFO2 rotate_alfa: ALFA commanded to +51.7 degrees 2011-Dec-17 04:48:20 LOG3 sock_errsend: To ALFAMOTOR: POSITION 51.7 REPLY 2011-Dec-17 04:48:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-17 04:48:20 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-17 04:48:20 LOG5 begin_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2011-Dec-17 04:48:20 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_014" 2011-Dec-17 04:48:20 LOG4 got_cormsg: From DATATAKING: set ra 144.70 2011-Dec-17 04:48:20 LOG4 got_cormsg: From DATATAKING: set dec 6.3568011505 2011-Dec-17 04:48:20 LOG4 got_cormsg: From DATATAKING: vw% 144.70 2011-Dec-17 04:48:20 LOG4 got_cormsg: From DATATAKING: vw% 6.3568011505 2011-Dec-17 04:48:20 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:48:20 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-17 04:48:20 LOG4 got_cormsg: From DATATAKING: pnt tr 144.70 6.3568011505 -CF 2011-Dec-17 04:48:20 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 04:48:20 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-17 04:48:20 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:48:51 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-17 04:48:51 INFO3 alfa_motor: ALFA rotator in-position +51.70 degrees 2011-Dec-17 04:48:51 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-17 04:48:51 LOG5 end_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2011-Dec-17 04:48:51 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-17 04:48:51 STOP finish_task: Finishing task 'rotate ALFA to +51.7 degrees' 2011-Dec-17 04:48:51 LOG5 finish_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2011-Dec-17 04:48:51 INFO2 finish_task: DONE finished configuration: rotating ALFA to +51.7 degrees 2011-Dec-17 04:48:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 04:48:51 STOP end_task: Finishing task 'rotate ALFA to +51.7 degrees' with status 'OK' 2011-Dec-17 04:48:51 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2011-Dec-17 04:48:51 START begin_task: Starting task 'waiting on telescope' 2011-Dec-17 04:48:51 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2011-Dec-17 04:48:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-17 04:48:51 LOG3 waittrk: Start waittrk 5 2011-Dec-17 04:48:51 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-17 04:48:51 LOG5 begin_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2011-Dec-17 04:48:56 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-17 04:48:56 LOG5 end_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2011-Dec-17 04:48:56 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-17 04:48:56 LOG5 begin_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2011-Dec-17 04:50:54 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-17 04:50:54 LOG5 end_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2011-Dec-17 04:50:54 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-17 04:50:54 INFO2 waittrk: Now tracking AGES3193_p3_014 2011-Dec-17 04:50:54 LOG4 waittrk: Current telescope position: Az = 144.45 ZA = 6.37 2011-Dec-17 04:50:54 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-17 04:50:54 LOG5 finish_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2011-Dec-17 04:50:54 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-17 04:50:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 04:50:54 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-17 04:50:54 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2011-Dec-17 04:50:54 START begin_task: Starting task 'selecting calibration type' 2011-Dec-17 04:50:54 LOG5 begin_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2011-Dec-17 04:50:54 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-17 04:50:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-17 04:50:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 04:50:54 START begin_task: Starting task 'waiting on setcal' 2011-Dec-17 04:50:54 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2011-Dec-17 04:50:54 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-17 04:50:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 04:50:55 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:50:56 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-17 04:50:56 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-17 04:50:56 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2011-Dec-17 04:50:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-17 04:50:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-17 04:50:56 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-17 04:50:56 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-17 04:50:56 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2011-Dec-17 04:50:56 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:50:56 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-17 04:50:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-17 04:50:56 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2011-Dec-17 04:50:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-17 04:50:56 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-17 04:50:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-17 04:50:56 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-17 04:50:56 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-17 04:50:56 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2011-Dec-17 04:50:56 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-17 04:50:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-17 04:50:56 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2011-Dec-17 04:50:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-17 04:50:56 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-17 04:50:56 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-17 04:50:56 LOG5 end_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2011-Dec-17 04:50:56 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Dec-17 04:50:56 INFO2 astwait: Waiting for 133 seconds from 08:50:56 to 08:53:09 UTC ... 2011-Dec-17 04:50:56 LOG4 send_obs_status: To obs_status: <1> TASKTIME 133 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-17 04:50:56 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Dec-17 04:50:56 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2011-Dec-17 04:53:09 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Dec-17 04:53:09 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2011-Dec-17 04:53:09 INFO3 astwait: Finished waiting 2011-Dec-17 04:53:09 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-17 04:53:09 LOG5 dopset_later: Calling 'dopset_later 61.497858201021216' 2011-Dec-17 04:53:09 INFO3 dopset_later: Setting Doppler correction for 04:54:09 (61.5 seconds from now) 2011-Dec-17 04:53:09 LOG5 antvel: Calling 'antvel 144.700000 6.356801 F Heliocentric 61.497858201021216' 2011-Dec-17 04:53:09 LOG2 antvel: Transforming current Az = 144.70 ZA = 6.36 to apparent RA = 09:53:42.0 Dec = +23:29:52.0 2011-Dec-17 04:53:09 LOG2 antvel: Parameters to Doppler: Heliocentric 32049 2011 351 0.0 2011-Dec-17 04:53:09 INFO5 antvel: Computed antenna velocity: -25.01221 km/s 2011-Dec-17 04:53:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-25.012212252299999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-17 04:53:09 INFO4 dopset_gen: New sky frequencies: 1381.358678 1381.358678 1381.358678 1381.358678 1381.358678 1381.358678 1381.358678 1381.358678 1381.358678 2011-Dec-17 04:53:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.358678 sky0=1381.358678 sky1=1381.358678 sky2=1381.358678 sky3=1381.358678 sky4=1381.358678 sky5=1381.358678 sky6=1381.358678 sky7=1381.358678 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-17 04:53:09 LOG2 dopset_gen: Result from 'sky2syn': 1631.358678 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-17 04:53:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631358678.0} 2011-Dec-17 04:53:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 04:53:09 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-17 04:53:09 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-17 04:53:09 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.0 Dec = +23:33:15.6 2011-Dec-17 04:53:09 LOG3 track_source: Calling 'track_source AGES3193_p3_014 095203.0 233315.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-17 04:53:09 START begin_task: Starting task 'sending tracking commands' 2011-Dec-17 04:53:09 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2011-Dec-17 04:53:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_014} INFO {Slewing to source 'AGES3193_p3_014' ...} 2011-Dec-17 04:53:09 INFO1 track_source: Starting to track AGES3193_p3_014 2011-Dec-17 04:53:09 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_014" 2011-Dec-17 04:53:09 LOG3 vw_send: To DATATAKING: set ra 095203.0 2011-Dec-17 04:53:09 LOG3 vw_send: To DATATAKING: set dec 233315.6 2011-Dec-17 04:53:09 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-17 04:53:09 LOG3 vw_send: To DATATAKING: pnt tr 095203.0 233315.6 -CJ 2011-Dec-17 04:53:09 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 04:53:09 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-17 04:53:09 LOG5 finish_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2011-Dec-17 04:53:09 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-17 04:53:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 04:53:09 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-17 04:53:09 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2011-Dec-17 04:53:09 START begin_task: Starting task 'waiting on telescope' 2011-Dec-17 04:53:09 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2011-Dec-17 04:53:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-17 04:53:09 LOG3 waittrk: Start waittrk 5 2011-Dec-17 04:53:09 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-17 04:53:09 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2011-Dec-17 04:53:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631358678.0} 2011-Dec-17 04:53:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 04:53:09 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_014" 2011-Dec-17 04:53:09 LOG4 got_cormsg: From DATATAKING: set ra 095203.0 2011-Dec-17 04:53:09 LOG4 got_cormsg: From DATATAKING: set dec 233315.6 2011-Dec-17 04:53:09 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-17 04:53:09 LOG4 got_cormsg: From DATATAKING: vw% 095203.0 2011-Dec-17 04:53:09 LOG4 got_cormsg: From DATATAKING: vw% 233315.6 2011-Dec-17 04:53:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:53:09 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-17 04:53:09 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.0 233315.6 -CJ 2011-Dec-17 04:53:09 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 04:53:09 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-17 04:53:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:53:14 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-17 04:53:14 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2011-Dec-17 04:53:14 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-17 04:53:14 LOG5 begin_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2011-Dec-17 04:53:16 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-17 04:53:16 LOG5 end_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2011-Dec-17 04:53:16 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-17 04:53:16 INFO2 waittrk: Now tracking AGES3193_p3_014 2011-Dec-17 04:53:16 LOG4 waittrk: Current telescope position: Az = 144.31 ZA = 6.37 2011-Dec-17 04:53:16 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-17 04:53:16 LOG5 finish_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2011-Dec-17 04:53:16 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-17 04:53:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 04:53:16 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-17 04:53:16 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2011-Dec-17 04:53:16 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-17 04:53:16 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2011-Dec-17 04:53:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-17 04:53:16 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-17 04:53:16 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-17 04:53:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-17 04:53:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 04:53:16 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-17 04:53:16 LOG5 begin_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2011-Dec-17 04:53:16 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-17 04:53:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 04:53:18 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:53:18 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-17 04:53:18 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-17 04:53:18 LOG5 end_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2011-Dec-17 04:53:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-17 04:53:18 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-17 04:53:18 LOG5 begin_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2011-Dec-17 04:53:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-17 04:53:18 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-17 04:53:18 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-17 04:53:18 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-17 04:53:18 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-17 04:53:18 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-17 04:53:18 LOG5 begin_task: Level: (5) ID = <10169> Status = 0 0 0 0 ok 2011-Dec-17 04:53:18 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:53:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-17 04:53:18 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 8 6 dB 2011-Dec-17 04:53:18 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 3 dB 2011-Dec-17 04:53:18 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 2 dB 2011-Dec-17 04:53:18 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2011-Dec-17 04:53:19 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-17 04:53:19 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-17 04:53:19 LOG5 end_task: Level: (5) ID = <10169> Status = 0 0 0 0 ok 2011-Dec-17 04:53:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.064 1.067 ALFA beam 1: 0.873 0.933 2011-Dec-17 04:53:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.898 1.000 ALFA beam 3: 1.052 1.104 2011-Dec-17 04:53:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.834 1.110 ALFA beam 5: 0.897 1.065 2011-Dec-17 04:53:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.042 0.014 ALFA beam 7: 0.907 0.014 2011-Dec-17 04:53:19 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-17 04:53:19 LOG5 finish_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2011-Dec-17 04:53:19 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-17 04:53:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 04:53:19 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-17 04:53:19 LOG5 end_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2011-Dec-17 04:53:19 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-17 04:53:19 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2011-Dec-17 04:53:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-17 04:53:19 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-17 04:53:19 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-17 04:53:19 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-17 04:53:19 LOG5 begin_task: Level: (5) ID = <10171> Status = 0 0 0 0 ok 2011-Dec-17 04:53:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:53:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.064 1.067 0.873 0.933 2011-Dec-17 04:53:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.898 1.000 1.052 1.104 2011-Dec-17 04:53:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.834 1.110 0.897 1.065 2011-Dec-17 04:53:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 0.014 0.907 0.014 2011-Dec-17 04:53:24 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.0 27.3 B 30.3 30.4 mn:A 0.2 0.1 B -0.3 -0.3 gn: 11 11 2011-Dec-17 04:53:24 INFO3 from_mock: From MOCK: b0s1g0 rms:A 31.3 29.9 B 28.3 29.9 mn:A 0.2 -0.4 B -0.5 0.1 gn: 12 11 2011-Dec-17 04:53:24 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.2 28.3 B 33.3 29.2 mn:A 0.6 0.7 B 0.1 -0.1 gn: 7 11 2011-Dec-17 04:53:24 INFO3 from_mock: From MOCK: b1s1g0 rms:A 29.9 27.5 B 28.3 28.3 mn:A -0.3 -0.3 B 0.6 0.1 gn: 8 9 2011-Dec-17 04:53:24 INFO3 from_mock: From MOCK: b2s0g0 rms:A 32.1 31.1 B 28.4 29.7 mn:A 0.0 -0.3 B 0.3 0.0 gn: 11 11 2011-Dec-17 04:53:24 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.3 29.6 B 29.2 27.2 mn:A 0.2 -0.3 B 0.1 0.3 gn: 11 11 2011-Dec-17 04:53:25 INFO3 from_mock: From MOCK: b3s0g0 rms:A 28.9 28.7 B 31.1 27.7 mn:A 0.4 -0.3 B -0.0 -0.2 gn: 12 12 2011-Dec-17 04:53:25 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.1 29.4 B 29.6 30.9 mn:A -0.3 0.3 B 0.1 0.1 gn: 12 12 2011-Dec-17 04:53:25 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.4 29.5 B 31.6 31.8 mn:A -0.2 -0.3 B -0.4 -0.0 gn: 13 12 2011-Dec-17 04:53:25 INFO3 from_mock: From MOCK: b4s1g0 rms:A 32.5 29.4 B 30.6 29.6 mn:A -0.1 -0.1 B -0.3 0.2 gn: 16 13 2011-Dec-17 04:53:25 INFO3 from_mock: From MOCK: b5s0g0 rms:A 31.9 30.7 B 30.1 30.1 mn:A 0.4 0.5 B -0.0 0.4 gn: 13 11 2011-Dec-17 04:53:25 INFO3 from_mock: From MOCK: b5s1g0 rms:A 28.7 28.5 B 30.4 30.2 mn:A -0.3 0.2 B -0.1 0.4 gn: 12 11 2011-Dec-17 04:53:25 INFO3 from_mock: From MOCK: b6s0g0 rms:A 31.9 29.2 B 15.4 15.8 mn:A -0.5 0.2 B 0.5 -0.4 gn: 13 31 2011-Dec-17 04:53:25 INFO3 from_mock: From MOCK: b6s1g0 rms:A 32.6 29.6 B 12.3 11.9 mn:A 0.7 0.4 B 0.1 0.1 gn: 14 31 2011-Dec-17 04:53:25 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-17 04:53:25 LOG5 end_task: Level: (5) ID = <10171> Status = 0 0 0 0 ok 2011-Dec-17 04:53:25 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-17 04:53:25 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-17 04:53:25 LOG5 finish_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2011-Dec-17 04:53:25 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-17 04:53:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 04:53:25 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-17 04:53:25 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2011-Dec-17 04:53:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-17 04:53:25 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-17 04:53:25 LOG5 finish_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2011-Dec-17 04:53:25 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-17 04:53:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 04:53:25 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-17 04:53:25 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2011-Dec-17 04:53:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel Cabrera 2011-Dec-17 04:53:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel Cabrera 2011-Dec-17 04:53:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel Cabrera 2011-Dec-17 04:53:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel Cabrera 2011-Dec-17 04:53:25 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-17 04:53:25 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-17 04:53:25 LOG5 begin_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2011-Dec-17 04:53:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-17 04:53:25 START begin_task: Starting task 'selecting calibration type' 2011-Dec-17 04:53:25 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2011-Dec-17 04:53:25 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-17 04:53:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-17 04:53:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 04:53:25 START begin_task: Starting task 'waiting on setcal' 2011-Dec-17 04:53:25 LOG5 begin_task: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2011-Dec-17 04:53:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2011-Dec-17 04:53:25 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-17 04:53:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 04:53:25 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:53:25 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-17 04:53:25 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-17 04:53:25 LOG5 end_task: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2011-Dec-17 04:53:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-17 04:53:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-17 04:53:25 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-17 04:53:25 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-17 04:53:25 LOG5 begin_task: Level: (5) ID = <10175> Status = 0 0 0 0 ok 2011-Dec-17 04:53:25 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:53:25 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-17 04:53:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-17 04:53:25 LOG5 end_task: Level: (5) ID = <10175> Status = 0 0 0 0 ok 2011-Dec-17 04:53:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-17 04:53:25 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-17 04:53:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-17 04:53:25 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-17 04:53:25 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-17 04:53:25 LOG5 begin_task: Level: (5) ID = <10176> Status = 0 0 0 0 ok 2011-Dec-17 04:53:26 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-17 04:53:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-17 04:53:26 LOG5 end_task: Level: (5) ID = <10176> Status = 0 0 0 0 ok 2011-Dec-17 04:53:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-17 04:53:26 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-17 04:53:26 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-17 04:53:26 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2011-Dec-17 04:53:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-17 04:53:26 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-17 04:53:26 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-17 04:53:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-17 04:53:26 LOG5 begin_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2011-Dec-17 04:53:26 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-17 04:53:26 NOTE WAPPDATA-new_file: New FITS file: wapp.20111217.a2048.0003.fits 2011-Dec-17 04:53:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-17 04:53:26 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111217.a2048.0003.fits} 2011-Dec-17 04:53:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-17 04:53:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-17 04:53:26 LOG5 end_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2011-Dec-17 04:53:26 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-17 04:53:26 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-17 04:53:26 LOG5 begin_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2011-Dec-17 04:53:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-17 04:53:26 LOG5 log_alfabeam: Parameters: 9.8674999999999997 23.554333333333336 10.149355 2011.9615434950695 51.699924 2011-Dec-17 04:53:26 LOG4 log_alfabeam: ALFABEAM 0 9.867500000000001 23.554333333333332 2011-Dec-17 04:53:26 LOG4 log_alfabeam: ALFABEAM 1 9.869929530470960 23.455185505039630 2011-Dec-17 04:53:26 LOG4 log_alfabeam: ALFABEAM 2 9.874427807857941 23.521191568502850 2011-Dec-17 04:53:26 LOG4 log_alfabeam: ALFABEAM 3 9.872107158934231 23.620864166835737 2011-Dec-17 04:53:26 LOG4 log_alfabeam: ALFABEAM 4 9.865135172438917 23.653962020004563 2011-Dec-17 04:53:26 LOG4 log_alfabeam: ALFABEAM 5 9.860505076627996 23.586113492817940 2011-Dec-17 04:53:26 LOG4 log_alfabeam: ALFABEAM 6 9.862978683462526 23.487018934908132 2011-Dec-17 04:53:26 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-17 04:53:26 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-17 04:53:26 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Dec-17 04:53:26 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_014 2011-Dec-17 04:53:26 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-17 04:53:26 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-17 04:53:26 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-17 04:53:26 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-17 04:53:26 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-17 04:53:26 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-17 04:53:26 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-17 04:53:26 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-17 04:53:26 LOG3 take_mock_data: PSET configuration: patternid=135100009 2011-Dec-17 04:53:26 LOG3 take_mock_data: PSET configuration: scanid=135100010 2011-Dec-17 04:53:26 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-17 04:53:26 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-17 04:53:26 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-17 04:53:26 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456358678.0 2011-Dec-17 04:53:26 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306358678.0 2011-Dec-17 04:53:26 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-17 04:53:26 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-17 04:53:26 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGES3193_p3_014:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=135100009:scanid=135100010:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456358678.0:topobfreqhz=1306358678.0:filetype=1 2011-Dec-17 04:53:26 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-17 04:53:26 LOG5 begin_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2011-Dec-17 04:53:26 LOG4 from_mock: From MOCK: psetok 2011-Dec-17 04:53:26 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-17 04:53:26 LOG5 end_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2011-Dec-17 04:53:26 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-17 04:53:26 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-17 04:53:26 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-17 04:53:26 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-17 04:53:26 LOG5 begin_task: Level: (5) ID = <10180> Status = 0 0 0 0 ok 2011-Dec-17 04:53:26 LOG4 from_mock: From MOCK: starok 2011-Dec-17 04:53:26 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-17 04:53:26 LOG5 end_task: Level: (5) ID = <10180> Status = 0 0 0 0 ok 2011-Dec-17 04:53:26 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-17 04:53:26 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135100010 2011-Dec-17 04:53:26 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-17 04:53:26 LOG5 begin_task: Level: (5) ID = <10181> Status = 0 0 0 0 ok 2011-Dec-17 04:53:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 04:53:26 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-17 04:53:26 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-17 04:53:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32007.00 2011-Dec-17 04:53:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-17 04:53:28 INFO2 got_mock_message: Mock spectrometer start file number is 00900 2011-Dec-17 04:53:28 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-17 04:53:28 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-17 04:53:28 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-17 04:53:28 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-17 04:53:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-17 04:53:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-17 04:53:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-17 04:53:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-17 04:53:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-17 04:53:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-17 04:53:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-17 04:53:28 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-17 04:53:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:53:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:53:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:53:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:53:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:53:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:53:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:53:31 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:53:31.01 2011-Dec-17 04:53:31 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324112011.01 Sat Dec 17 04:53:31 2011 2011-Dec-17 04:53:31 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-17 04:53:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.358678 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 04:53:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.358678 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 04:53:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.358678 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 04:53:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.358678 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 04:53:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.358678 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 04:53:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.358678 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 04:53:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.358678 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 04:53:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.358678 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 04:53:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.358678 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 04:53:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 04:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.570 (still bad) 2011-Dec-17 04:53:37 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-17 04:53:37 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-17 04:53:37 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-17 04:53:37 LOG5 end_task: Level: (5) ID = <10181> Status = 0 0 0 0 ok 2011-Dec-17 04:53:37 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-17 04:53:37 LOG5 end_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2011-Dec-17 04:53:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-17 04:53:37 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-17 04:53:37 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-17 04:53:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-17 04:53:37 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2011-Dec-17 04:53:37 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-17 04:53:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-17 04:53:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-17 04:53:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-17 04:53:37 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2011-Dec-17 04:53:37 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-17 04:53:37 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-17 04:53:37 LOG5 begin_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2011-Dec-17 04:53:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-17 04:53:37 LOG5 log_alfabeam: Parameters: 9.8674999999999997 23.554333333333336 10.152419 2011.9615438436383 51.699924 2011-Dec-17 04:53:37 LOG4 log_alfabeam: ALFABEAM 0 9.867500000000009 23.554333333333350 2011-Dec-17 04:53:37 LOG4 log_alfabeam: ALFABEAM 1 9.869969241898106 23.455370937752537 2011-Dec-17 04:53:37 LOG4 log_alfabeam: ALFABEAM 2 9.874441182320910 23.521721949510781 2011-Dec-17 04:53:37 LOG4 log_alfabeam: ALFABEAM 3 9.872080135252476 23.621215332557504 2011-Dec-17 04:53:37 LOG4 log_alfabeam: ALFABEAM 4 9.865094935895449 23.653779517829268 2011-Dec-17 04:53:37 LOG4 log_alfabeam: ALFABEAM 5 9.860492526636650 23.585583231195660 2011-Dec-17 04:53:37 LOG4 log_alfabeam: ALFABEAM 6 9.863005678501596 23.486677314871464 2011-Dec-17 04:53:37 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-17 04:53:37 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-17 04:53:37 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Dec-17 04:53:37 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_014 2011-Dec-17 04:53:37 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-17 04:53:37 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-17 04:53:37 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-17 04:53:37 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-17 04:53:37 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-17 04:53:37 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-17 04:53:37 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-17 04:53:37 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-17 04:53:37 LOG3 take_mock_data: PSET configuration: patternid=135100009 2011-Dec-17 04:53:37 LOG3 take_mock_data: PSET configuration: scanid=135100011 2011-Dec-17 04:53:37 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-17 04:53:37 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-17 04:53:37 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-17 04:53:37 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456358678.0 2011-Dec-17 04:53:37 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306358678.0 2011-Dec-17 04:53:37 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-17 04:53:37 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-17 04:53:37 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGES3193_p3_014:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=135100009:scanid=135100011:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456358678.0:topobfreqhz=1306358678.0:filetype=1 2011-Dec-17 04:53:37 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-17 04:53:37 LOG5 begin_task: Level: (5) ID = <10184> Status = 0 0 0 0 ok 2011-Dec-17 04:53:37 LOG4 from_mock: From MOCK: psetok 2011-Dec-17 04:53:37 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-17 04:53:37 LOG5 end_task: Level: (5) ID = <10184> Status = 0 0 0 0 ok 2011-Dec-17 04:53:37 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-17 04:53:37 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-17 04:53:37 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-17 04:53:37 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-17 04:53:37 LOG5 begin_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2011-Dec-17 04:53:37 LOG4 from_mock: From MOCK: starok 2011-Dec-17 04:53:37 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-17 04:53:37 LOG5 end_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2011-Dec-17 04:53:37 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-17 04:53:37 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135100011 2011-Dec-17 04:53:37 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-17 04:53:37 LOG5 begin_task: Level: (5) ID = <10186> Status = 0 0 0 0 ok 2011-Dec-17 04:53:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 04:53:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-17 04:53:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32018.00 2011-Dec-17 04:53:38 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-17 04:53:38 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-17 04:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.570 (still bad) 2011-Dec-17 04:53:40 INFO2 got_mock_message: Mock spectrometer start file number is 01000 2011-Dec-17 04:53:40 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-17 04:53:40 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-17 04:53:40 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-17 04:53:40 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-17 04:53:40 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-17 04:53:40 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-17 04:53:40 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-17 04:53:40 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-17 04:53:40 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-17 04:53:40 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-17 04:53:40 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-17 04:53:40 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-17 04:53:40 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:53:40 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:53:40 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:53:40 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:53:40 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:53:40 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:53:40 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 04:53:43 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:53:43.01 2011-Dec-17 04:53:43 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324112023.01 Sat Dec 17 04:53:43 2011 2011-Dec-17 04:53:43 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-17 04:53:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.358678 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 04:53:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.358678 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 04:53:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.358678 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 04:53:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.358678 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 04:53:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.358678 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 04:53:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.358678 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 04:53:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.358678 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 04:53:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.358678 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 04:53:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.358678 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 04:53:43 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-17 04:53:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 04:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:53:49 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-17 04:53:49 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-17 04:53:49 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-17 04:53:49 LOG5 end_task: Level: (5) ID = <10186> Status = 0 0 0 0 ok 2011-Dec-17 04:53:49 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-17 04:53:49 LOG5 end_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2011-Dec-17 04:53:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-17 04:53:49 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-17 04:53:49 LOG5 finish_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2011-Dec-17 04:53:49 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-17 04:53:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 04:53:49 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-17 04:53:49 LOG5 end_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2011-Dec-17 04:53:49 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-17 04:53:49 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 144.70 and ZA = 6.36 2011-Dec-17 04:53:49 LOG3 track_source: Calling 'track_source AGES3193_p3_014 144.70 6.3568011505 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-17 04:53:49 START begin_task: Starting task 'sending tracking commands' 2011-Dec-17 04:53:49 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2011-Dec-17 04:53:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_014} INFO {Slewing to source 'AGES3193_p3_014' ...} 2011-Dec-17 04:53:49 INFO1 track_source: Starting to track AGES3193_p3_014 2011-Dec-17 04:53:49 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_014" 2011-Dec-17 04:53:49 LOG3 vw_send: To DATATAKING: set ra 144.70 2011-Dec-17 04:53:49 LOG3 vw_send: To DATATAKING: set dec 6.3568011505 2011-Dec-17 04:53:49 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-17 04:53:49 LOG3 vw_send: To DATATAKING: pnt tr 144.70 6.3568011505 -CF 2011-Dec-17 04:53:49 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 04:53:49 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-17 04:53:49 LOG5 finish_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2011-Dec-17 04:53:49 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-17 04:53:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 04:53:49 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-17 04:53:49 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2011-Dec-17 04:53:49 LOG1 fixed_driftmap: Parameters: HA = +00:16:00.1 Start = 10:09:42.3 LST = 10:09:20.7 diff = 21.6 secs 2011-Dec-17 04:53:49 INFO2 fixed_driftmap: Waiting 19.6 seconds for RA 9:53:42 2011-Dec-17 04:53:49 INFO2 lstwait: Waiting for 19.5 secs from LST 10:09:21 to LST 10:09:40 ... 2011-Dec-17 04:53:49 LOG4 send_obs_status: To obs_status: <1> TASKTIME 19.505228792059871 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-17 04:53:49 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-17 04:53:49 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2011-Dec-17 04:53:49 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_014" 2011-Dec-17 04:53:49 LOG4 got_cormsg: From DATATAKING: set ra 144.70 2011-Dec-17 04:53:49 LOG4 got_cormsg: From DATATAKING: set dec 6.3568011505 2011-Dec-17 04:53:49 LOG4 got_cormsg: From DATATAKING: vw% 144.70 2011-Dec-17 04:53:49 LOG4 got_cormsg: From DATATAKING: vw% 6.3568011505 2011-Dec-17 04:53:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:53:49 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-17 04:53:49 LOG4 got_cormsg: From DATATAKING: pnt tr 144.70 6.3568011505 -CF 2011-Dec-17 04:53:49 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 04:53:49 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-17 04:53:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 04:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:54:09 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-17 04:54:09 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2011-Dec-17 04:54:09 LOG4 lstwait: Finished waiting 0.50 seconds late 2011-Dec-17 04:54:09 INFO3 lstwait: Finished waiting 2011-Dec-17 04:54:09 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-17 04:54:09 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-17 04:54:09 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-17 04:54:09 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-17 04:54:09 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-17 04:54:09 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-17 04:54:09 LOG5 begin_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2011-Dec-17 04:54:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-17 04:54:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-17 04:54:09 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-17 04:54:09 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-17 04:54:09 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Dec-17 04:54:09 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_014 2011-Dec-17 04:54:09 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-17 04:54:09 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-17 04:54:09 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-17 04:54:09 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-17 04:54:09 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-17 04:54:09 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-17 04:54:09 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-17 04:54:09 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-17 04:54:09 LOG3 take_mock_data: PSET configuration: patternid=135100012 2011-Dec-17 04:54:09 LOG3 take_mock_data: PSET configuration: scanid=135100012 2011-Dec-17 04:54:09 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-17 04:54:09 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-17 04:54:09 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-17 04:54:09 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456358678.0 2011-Dec-17 04:54:09 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306358678.0 2011-Dec-17 04:54:09 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-17 04:54:09 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-17 04:54:09 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGES3193_p3_014:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=135100012:scanid=135100012:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456358678.0:topobfreqhz=1306358678.0:filetype=1 2011-Dec-17 04:54:09 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-17 04:54:09 LOG5 begin_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2011-Dec-17 04:54:09 LOG4 from_mock: From MOCK: psetok 2011-Dec-17 04:54:09 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-17 04:54:09 LOG5 end_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2011-Dec-17 04:54:09 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-17 04:54:09 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-17 04:54:09 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-17 04:54:09 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-17 04:54:09 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2011-Dec-17 04:54:09 LOG4 from_mock: From MOCK: starok 2011-Dec-17 04:54:09 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-17 04:54:09 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2011-Dec-17 04:54:09 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-17 04:54:09 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 135100012 2011-Dec-17 04:54:09 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-17 04:54:09 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2011-Dec-17 04:54:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 04:54:09 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-17 04:54:09 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-17 04:54:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-17 04:54:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32050.00 2011-Dec-17 04:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.358678 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 04:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.358678 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 04:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.358678 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 04:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.358678 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 04:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.358678 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 04:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.358678 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 04:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.358678 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 04:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.358678 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 04:54:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.358678 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 04:54:11 INFO2 got_mock_message: Mock spectrometer start file number is 01100 2011-Dec-17 04:54:11 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-17 04:54:11 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2011-Dec-17 04:54:11 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-17 04:54:11 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-17 04:54:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-17 04:54:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-17 04:54:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-17 04:54:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-17 04:54:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-17 04:54:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-17 04:54:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-17 04:54:11 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-17 04:54:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 04:54:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 04:54:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 04:54:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 04:54:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 04:54:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 04:54:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 04:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:54:14 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:54:14.01 2011-Dec-17 04:54:14 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324112054.01 Sat Dec 17 04:54:14 2011 2011-Dec-17 04:54:14 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-17 04:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 04:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:54:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:54:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.066 1.068 0.875 0.931 2011-Dec-17 04:54:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.895 0.997 1.051 1.104 2011-Dec-17 04:54:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.836 1.115 0.900 1.064 2011-Dec-17 04:54:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 0.014 0.907 0.014 2011-Dec-17 04:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:55:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:55:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.069 1.070 0.876 0.932 2011-Dec-17 04:55:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.898 0.999 1.052 1.104 2011-Dec-17 04:55:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.839 1.118 0.901 1.067 2011-Dec-17 04:55:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.014 0.907 0.014 2011-Dec-17 04:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 04:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 04:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 04:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 04:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 04:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 04:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 04:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:56:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:56:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.069 1.069 0.875 0.933 2011-Dec-17 04:56:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.900 1.003 1.052 1.103 2011-Dec-17 04:56:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.834 1.108 0.900 1.067 2011-Dec-17 04:56:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.014 0.907 0.014 2011-Dec-17 04:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 04:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 04:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 04:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 04:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-17 04:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 04:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 04:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 04:57:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:57:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.072 0.875 0.931 2011-Dec-17 04:57:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.896 0.998 1.052 1.103 2011-Dec-17 04:57:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.837 1.116 0.910 1.078 2011-Dec-17 04:57:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.014 0.910 0.014 2011-Dec-17 04:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 04:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 04:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 04:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:58:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:58:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.069 1.071 0.876 0.931 2011-Dec-17 04:58:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.897 1.000 1.052 1.104 2011-Dec-17 04:58:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.835 1.109 0.903 1.068 2011-Dec-17 04:58:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 0.014 0.909 0.014 2011-Dec-17 04:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 04:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 04:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 04:59:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 04:59:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.069 1.071 0.875 0.932 2011-Dec-17 04:59:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.899 1.001 1.051 1.103 2011-Dec-17 04:59:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.835 1.109 0.900 1.067 2011-Dec-17 04:59:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.014 0.909 0.014 2011-Dec-17 04:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 04:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 04:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 04:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:00:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:00:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.068 1.068 0.876 0.933 2011-Dec-17 05:00:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.899 1.001 1.054 1.103 2011-Dec-17 05:00:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.835 1.109 0.899 1.067 2011-Dec-17 05:00:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 0.014 0.909 0.014 2011-Dec-17 05:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-17 05:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-17 05:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-17 05:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:01:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:01:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.071 0.876 0.934 2011-Dec-17 05:01:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.900 1.002 1.067 1.120 2011-Dec-17 05:01:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.835 1.108 0.901 1.069 2011-Dec-17 05:01:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 0.014 0.906 0.014 2011-Dec-17 05:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-17 05:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.153 (still bad) 2011-Dec-17 05:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.171 (still bad) 2011-Dec-17 05:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.185 (still bad) 2011-Dec-17 05:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.193 (still bad) 2011-Dec-17 05:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.194 (still bad) 2011-Dec-17 05:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.184 (still bad) 2011-Dec-17 05:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.169 (still bad) 2011-Dec-17 05:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.153 (still bad) 2011-Dec-17 05:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-17 05:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-17 05:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-17 05:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-17 05:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.159 (still bad) 2011-Dec-17 05:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.164 (still bad) 2011-Dec-17 05:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.162 (still bad) 2011-Dec-17 05:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.157 (still bad) 2011-Dec-17 05:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-17 05:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-17 05:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 05:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:02:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:02:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.069 1.072 0.878 0.934 2011-Dec-17 05:02:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.901 0.999 1.053 1.104 2011-Dec-17 05:02:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.839 1.115 0.908 1.071 2011-Dec-17 05:02:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 0.014 0.908 0.014 2011-Dec-17 05:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:03:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:03:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.075 0.879 0.935 2011-Dec-17 05:03:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.899 1.002 1.055 1.107 2011-Dec-17 05:03:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.836 1.112 0.900 1.069 2011-Dec-17 05:03:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.014 0.909 0.014 2011-Dec-17 05:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:04:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:04:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.073 0.880 0.936 2011-Dec-17 05:04:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.898 1.000 1.051 1.103 2011-Dec-17 05:04:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.836 1.111 0.903 1.069 2011-Dec-17 05:04:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.014 0.909 0.014 2011-Dec-17 05:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:05:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:05:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.072 0.878 0.933 2011-Dec-17 05:05:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.897 1.000 1.054 1.105 2011-Dec-17 05:05:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.835 1.111 0.903 1.070 2011-Dec-17 05:05:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 0.014 0.909 0.014 2011-Dec-17 05:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:06:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:06:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:06:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.069 1.073 0.888 0.945 2011-Dec-17 05:06:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.902 1.001 1.051 1.103 2011-Dec-17 05:06:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.838 1.111 0.902 1.067 2011-Dec-17 05:06:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.014 0.908 0.014 2011-Dec-17 05:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-17 05:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-17 05:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-17 05:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-17 05:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-17 05:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-17 05:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-17 05:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-17 05:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-17 05:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-17 05:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-17 05:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-17 05:07:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:07:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.070 1.074 0.876 0.931 2011-Dec-17 05:07:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.899 1.000 1.055 1.105 2011-Dec-17 05:07:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.836 1.105 0.904 1.067 2011-Dec-17 05:07:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.014 0.910 0.014 2011-Dec-17 05:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-17 05:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-17 05:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-17 05:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:08:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:08:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-17 05:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-17 05:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-17 05:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:08:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:08:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.070 1.073 0.882 0.938 2011-Dec-17 05:08:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.901 1.001 1.056 1.105 2011-Dec-17 05:08:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.837 1.110 0.903 1.069 2011-Dec-17 05:08:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 0.014 0.910 0.014 2011-Dec-17 05:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-17 05:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-17 05:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:09:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-17 05:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:09:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:09:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.068 1.073 0.876 0.933 2011-Dec-17 05:09:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.898 0.999 1.054 1.106 2011-Dec-17 05:09:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.837 1.108 0.904 1.069 2011-Dec-17 05:09:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 0.014 0.911 0.014 2011-Dec-17 05:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 05:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-17 05:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-17 05:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-17 05:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-17 05:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 05:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:10:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:10:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.068 1.074 0.881 0.935 2011-Dec-17 05:10:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.900 1.000 1.053 1.105 2011-Dec-17 05:10:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.837 1.110 0.902 1.071 2011-Dec-17 05:10:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.014 0.912 0.014 2011-Dec-17 05:10:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:10:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:10:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:10:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:10:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:11:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:11:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-17 05:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-17 05:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:11:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:11:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.070 1.076 0.879 0.934 2011-Dec-17 05:11:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.900 1.001 1.055 1.107 2011-Dec-17 05:11:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.838 1.110 0.901 1.068 2011-Dec-17 05:11:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 0.014 0.911 0.014 2011-Dec-17 05:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:12:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:12:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:12:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:12:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.076 0.881 0.936 2011-Dec-17 05:12:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.899 1.001 1.054 1.105 2011-Dec-17 05:12:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.839 1.110 0.909 1.076 2011-Dec-17 05:12:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.047 0.014 0.911 0.014 2011-Dec-17 05:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-17 05:13:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:13:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:13:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:13:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:13:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.083 1.087 0.884 0.939 2011-Dec-17 05:13:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.898 1.001 1.054 1.107 2011-Dec-17 05:13:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.841 1.114 0.903 1.070 2011-Dec-17 05:13:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.014 0.910 0.014 2011-Dec-17 05:13:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-17 05:14:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 05:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:14:15 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-17 05:14:15 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-17 05:14:15 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-17 05:14:15 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2011-Dec-17 05:14:15 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-17 05:14:15 LOG5 end_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2011-Dec-17 05:14:15 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-17 05:14:15 LOG5 finish_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2011-Dec-17 05:14:15 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-17 05:14:15 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-17 05:14:15 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-17 05:14:15 LOG5 end_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2011-Dec-17 05:14:15 COMMAND run_command_line: EXECUTING command 34: 'ENDIF' 2011-Dec-17 05:14:15 COMMAND run_command_line: EXECUTING command 37: 'IF LSTSLEW(AGES3193_p3_016) < 103311 THEN' 2011-Dec-17 05:14:15 LOG3 is_if_valid: Current source data: up 122.7 9.9 UP - - 45 1.5 2011-Dec-17 05:14:15 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_016) < 103311 2011-Dec-17 05:14:15 INFO5 is_if_valid: Condition parsed as: 10.522249 < 10.553055555555556 2011-Dec-17 05:14:15 COMMAND run_command_line: EXECUTING command 38: 'FIXEDDRIFT az=120.61 alfaangle=78.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_016 ra=95300.00 dec=233030.00' 2011-Dec-17 05:14:15 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-17 05:14:16 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-17 05:14:16 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 120.61 78.3 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_016 95300.00 233030.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-17 05:14:16 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-17 05:14:16 LOG5 begin_task: Level: (2) ID = <10193> Status = 0 0 0 0 ok 2011-Dec-17 05:14:16 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_014' 2011-Dec-17 05:14:16 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-17 05:14:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_016} 2011-Dec-17 05:14:16 INFO3 fixed_driftmap: Sending telescope to Az = 120.61 and ZA = 10.53 2011-Dec-17 05:14:16 LOG3 track_source: Calling 'track_source AGES3193_p3_016 120.61 10.5314997799 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-17 05:14:16 START begin_task: Starting task 'sending tracking commands' 2011-Dec-17 05:14:16 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2011-Dec-17 05:14:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_016} INFO {Slewing to source 'AGES3193_p3_016' ...} 2011-Dec-17 05:14:16 INFO1 track_source: Starting to track AGES3193_p3_016 2011-Dec-17 05:14:16 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_016" 2011-Dec-17 05:14:16 LOG3 vw_send: To DATATAKING: set ra 120.61 2011-Dec-17 05:14:16 LOG3 vw_send: To DATATAKING: set dec 10.5314997799 2011-Dec-17 05:14:16 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-17 05:14:16 LOG3 vw_send: To DATATAKING: pnt tr 120.61 10.5314997799 -CF 2011-Dec-17 05:14:16 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 05:14:16 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-17 05:14:16 LOG5 finish_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2011-Dec-17 05:14:16 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-17 05:14:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 05:14:16 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-17 05:14:16 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2011-Dec-17 05:14:16 START begin_task: Starting task 'rotate ALFA to +78.3 degrees' 2011-Dec-17 05:14:16 LOG5 begin_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2011-Dec-17 05:14:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +78.3 degrees ...} 2011-Dec-17 05:14:16 INFO2 rotate_alfa: ALFA commanded to +78.3 degrees 2011-Dec-17 05:14:16 LOG3 sock_errsend: To ALFAMOTOR: POSITION 78.3 REPLY 2011-Dec-17 05:14:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-17 05:14:16 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-17 05:14:16 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2011-Dec-17 05:14:16 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_016" 2011-Dec-17 05:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-17 05:14:16 LOG4 got_cormsg: From DATATAKING: set ra 120.61 2011-Dec-17 05:14:16 LOG4 got_cormsg: From DATATAKING: set dec 10.5314997799 2011-Dec-17 05:14:16 LOG4 got_cormsg: From DATATAKING: vw% 120.61 2011-Dec-17 05:14:16 LOG4 got_cormsg: From DATATAKING: vw% 10.5314997799 2011-Dec-17 05:14:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 05:14:16 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-17 05:14:16 LOG4 got_cormsg: From DATATAKING: pnt tr 120.61 10.5314997799 -CF 2011-Dec-17 05:14:16 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 05:14:16 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-17 05:14:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 05:14:32 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-17 05:14:32 INFO3 alfa_motor: ALFA rotator in-position +78.30 degrees 2011-Dec-17 05:14:32 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-17 05:14:32 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2011-Dec-17 05:14:32 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-17 05:14:32 STOP finish_task: Finishing task 'rotate ALFA to +78.3 degrees' 2011-Dec-17 05:14:32 LOG5 finish_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2011-Dec-17 05:14:32 INFO2 finish_task: DONE finished configuration: rotating ALFA to +78.3 degrees 2011-Dec-17 05:14:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 05:14:32 STOP end_task: Finishing task 'rotate ALFA to +78.3 degrees' with status 'OK' 2011-Dec-17 05:14:32 LOG5 end_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2011-Dec-17 05:14:32 START begin_task: Starting task 'waiting on telescope' 2011-Dec-17 05:14:32 LOG5 begin_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2011-Dec-17 05:14:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-17 05:14:32 LOG3 waittrk: Start waittrk 5 2011-Dec-17 05:14:32 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-17 05:14:32 LOG5 begin_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2011-Dec-17 05:14:37 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-17 05:14:37 LOG5 end_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2011-Dec-17 05:14:37 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-17 05:14:37 LOG5 begin_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2011-Dec-17 05:16:05 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-17 05:16:05 LOG5 end_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2011-Dec-17 05:16:05 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-17 05:16:05 INFO2 waittrk: Now tracking AGES3193_p3_016 2011-Dec-17 05:16:05 LOG4 waittrk: Current telescope position: Az = 120.37 ZA = 10.54 2011-Dec-17 05:16:05 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-17 05:16:05 LOG5 finish_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2011-Dec-17 05:16:05 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-17 05:16:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 05:16:05 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-17 05:16:05 LOG5 end_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2011-Dec-17 05:16:05 START begin_task: Starting task 'selecting calibration type' 2011-Dec-17 05:16:05 LOG5 begin_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2011-Dec-17 05:16:05 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-17 05:16:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-17 05:16:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 05:16:05 START begin_task: Starting task 'waiting on setcal' 2011-Dec-17 05:16:05 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2011-Dec-17 05:16:05 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-17 05:16:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 05:16:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 05:16:07 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-17 05:16:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-17 05:16:07 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2011-Dec-17 05:16:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-17 05:16:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-17 05:16:07 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-17 05:16:07 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-17 05:16:07 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2011-Dec-17 05:16:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 05:16:07 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-17 05:16:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-17 05:16:07 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2011-Dec-17 05:16:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-17 05:16:07 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-17 05:16:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-17 05:16:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-17 05:16:07 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-17 05:16:07 LOG5 begin_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2011-Dec-17 05:16:07 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-17 05:16:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-17 05:16:07 LOG5 end_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2011-Dec-17 05:16:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-17 05:16:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-17 05:16:07 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-17 05:16:07 LOG5 end_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2011-Dec-17 05:16:07 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Dec-17 05:16:07 INFO2 astwait: Waiting for 28 seconds from 09:16:07 to 09:16:35 UTC ... 2011-Dec-17 05:16:07 LOG4 send_obs_status: To obs_status: <1> TASKTIME 28 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-17 05:16:07 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Dec-17 05:16:07 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2011-Dec-17 05:16:35 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Dec-17 05:16:35 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2011-Dec-17 05:16:35 INFO3 astwait: Finished waiting 2011-Dec-17 05:16:35 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-17 05:16:35 LOG5 dopset_later: Calling 'dopset_later 61.055355677836005' 2011-Dec-17 05:16:35 INFO3 dopset_later: Setting Doppler correction for 05:17:35 (61.1 seconds from now) 2011-Dec-17 05:16:35 LOG5 antvel: Calling 'antvel 120.610000 10.531500 F Heliocentric 61.055355677836005' 2011-Dec-17 05:16:35 LOG2 antvel: Transforming current Az = 120.61 ZA = 10.53 to apparent RA = 09:53:42.0 Dec = +23:26:52.0 2011-Dec-17 05:16:35 LOG2 antvel: Parameters to Doppler: Heliocentric 33455 2011 351 0.0 2011-Dec-17 05:16:35 INFO5 antvel: Computed antenna velocity: -24.97502 km/s 2011-Dec-17 05:16:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-24.975019848799999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-17 05:16:35 INFO4 dopset_gen: New sky frequencies: 1381.358506 1381.358506 1381.358506 1381.358506 1381.358506 1381.358506 1381.358506 1381.358506 1381.358506 2011-Dec-17 05:16:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.358506 sky0=1381.358506 sky1=1381.358506 sky2=1381.358506 sky3=1381.358506 sky4=1381.358506 sky5=1381.358506 sky6=1381.358506 sky7=1381.358506 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-17 05:16:35 LOG2 dopset_gen: Result from 'sky2syn': 1631.358506 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-17 05:16:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631358506.0} 2011-Dec-17 05:16:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 05:16:35 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-17 05:16:35 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-17 05:16:35 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.5 Dec = +23:30:15.6 2011-Dec-17 05:16:35 LOG3 track_source: Calling 'track_source AGES3193_p3_016 095203.5 233015.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-17 05:16:35 START begin_task: Starting task 'sending tracking commands' 2011-Dec-17 05:16:35 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2011-Dec-17 05:16:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_016} INFO {Slewing to source 'AGES3193_p3_016' ...} 2011-Dec-17 05:16:35 INFO1 track_source: Starting to track AGES3193_p3_016 2011-Dec-17 05:16:35 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_016" 2011-Dec-17 05:16:35 LOG3 vw_send: To DATATAKING: set ra 095203.5 2011-Dec-17 05:16:35 LOG3 vw_send: To DATATAKING: set dec 233015.6 2011-Dec-17 05:16:35 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-17 05:16:35 LOG3 vw_send: To DATATAKING: pnt tr 095203.5 233015.6 -CJ 2011-Dec-17 05:16:35 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 05:16:35 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-17 05:16:35 LOG5 finish_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2011-Dec-17 05:16:35 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-17 05:16:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 05:16:35 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-17 05:16:35 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2011-Dec-17 05:16:35 START begin_task: Starting task 'waiting on telescope' 2011-Dec-17 05:16:35 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2011-Dec-17 05:16:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-17 05:16:35 LOG3 waittrk: Start waittrk 5 2011-Dec-17 05:16:35 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-17 05:16:35 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2011-Dec-17 05:16:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631358506.0} 2011-Dec-17 05:16:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 05:16:35 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 05:16:35 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_016" 2011-Dec-17 05:16:35 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 05:16:35 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 05:16:35 LOG4 got_cormsg: From DATATAKING: set ra 095203.5 2011-Dec-17 05:16:35 LOG4 got_cormsg: From DATATAKING: set dec 233015.6 2011-Dec-17 05:16:35 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-17 05:16:35 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.5 233015.6 -CJ 2011-Dec-17 05:16:35 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 05:16:35 LOG4 got_cormsg: From DATATAKING: 095203.5 2011-Dec-17 05:16:35 LOG4 got_cormsg: From DATATAKING: vw% 233015.6 2011-Dec-17 05:16:35 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2011-Dec-17 05:16:40 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-17 05:16:40 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2011-Dec-17 05:16:40 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-17 05:16:40 LOG5 begin_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2011-Dec-17 05:16:42 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-17 05:16:42 LOG5 end_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2011-Dec-17 05:16:42 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-17 05:16:42 INFO2 waittrk: Now tracking AGES3193_p3_016 2011-Dec-17 05:16:42 LOG4 waittrk: Current telescope position: Az = 120.31 ZA = 10.55 2011-Dec-17 05:16:42 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-17 05:16:42 LOG5 finish_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2011-Dec-17 05:16:42 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-17 05:16:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 05:16:42 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-17 05:16:42 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2011-Dec-17 05:16:42 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-17 05:16:42 LOG5 begin_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2011-Dec-17 05:16:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-17 05:16:42 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-17 05:16:42 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-17 05:16:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-17 05:16:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 05:16:42 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-17 05:16:42 LOG5 begin_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2011-Dec-17 05:16:42 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-17 05:16:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 05:16:43 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 05:16:43 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-17 05:16:43 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-17 05:16:43 LOG5 end_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2011-Dec-17 05:16:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-17 05:16:43 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-17 05:16:43 LOG5 begin_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2011-Dec-17 05:16:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-17 05:16:43 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-17 05:16:43 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-17 05:16:43 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-17 05:16:43 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-17 05:16:43 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-17 05:16:43 LOG5 begin_task: Level: (5) ID = <10212> Status = 0 0 0 0 ok 2011-Dec-17 05:16:43 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 05:16:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-17 05:16:43 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 8 6 dB 2011-Dec-17 05:16:43 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 3 dB 2011-Dec-17 05:16:43 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 2 dB 2011-Dec-17 05:16:43 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2011-Dec-17 05:16:43 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-17 05:16:43 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-17 05:16:43 LOG5 end_task: Level: (5) ID = <10212> Status = 0 0 0 0 ok 2011-Dec-17 05:16:43 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.102 1.094 ALFA beam 1: 0.911 0.958 2011-Dec-17 05:16:43 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.948 1.042 ALFA beam 3: 1.088 1.118 2011-Dec-17 05:16:43 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.848 1.116 ALFA beam 5: 0.914 1.084 2011-Dec-17 05:16:43 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.060 0.014 ALFA beam 7: 0.922 0.014 2011-Dec-17 05:16:43 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-17 05:16:43 LOG5 finish_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2011-Dec-17 05:16:43 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-17 05:16:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 05:16:43 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-17 05:16:43 LOG5 end_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2011-Dec-17 05:16:43 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-17 05:16:43 LOG5 begin_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2011-Dec-17 05:16:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-17 05:16:43 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-17 05:16:44 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-17 05:16:44 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-17 05:16:44 LOG5 begin_task: Level: (5) ID = <10214> Status = 0 0 0 0 ok 2011-Dec-17 05:16:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:16:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.094 0.911 0.958 2011-Dec-17 05:16:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 1.042 1.088 1.118 2011-Dec-17 05:16:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.848 1.116 0.914 1.084 2011-Dec-17 05:16:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 0.014 0.922 0.014 2011-Dec-17 05:16:49 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.6 27.7 B 30.7 30.8 mn:A -0.0 -0.1 B -0.5 -0.4 gn: 11 11 2011-Dec-17 05:16:49 INFO3 from_mock: From MOCK: b0s1g0 rms:A 31.8 30.4 B 28.5 30.2 mn:A -0.0 -0.4 B -0.7 0.1 gn: 12 11 2011-Dec-17 05:16:49 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.8 28.9 B 33.8 29.6 mn:A 0.4 0.6 B 0.2 -0.0 gn: 7 11 2011-Dec-17 05:16:49 INFO3 from_mock: From MOCK: b1s1g0 rms:A 30.4 28.0 B 28.6 28.6 mn:A -0.3 -0.3 B 0.6 0.3 gn: 8 9 2011-Dec-17 05:16:49 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.4 28.6 B 29.1 30.4 mn:A 0.0 -0.4 B 0.3 -0.1 gn: 10 11 2011-Dec-17 05:16:49 INFO3 from_mock: From MOCK: b2s1g0 rms:A 30.1 30.4 B 29.8 27.7 mn:A 0.1 -0.3 B 0.0 0.2 gn: 11 11 2011-Dec-17 05:16:49 INFO3 from_mock: From MOCK: b3s0g0 rms:A 29.6 29.3 B 31.4 28.0 mn:A 0.3 -0.3 B 0.0 -0.2 gn: 12 12 2011-Dec-17 05:16:49 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.8 30.1 B 29.7 30.9 mn:A -0.3 0.3 B 0.1 0.2 gn: 12 12 2011-Dec-17 05:16:49 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.7 29.8 B 28.2 28.3 mn:A -0.3 -0.3 B -0.4 -0.0 gn: 13 11 2011-Dec-17 05:16:49 INFO3 from_mock: From MOCK: b4s1g0 rms:A 32.8 29.7 B 30.7 29.6 mn:A -0.1 -0.0 B -0.4 0.2 gn: 16 13 2011-Dec-17 05:16:49 INFO3 from_mock: From MOCK: b5s0g0 rms:A 32.2 31.0 B 30.2 30.3 mn:A 0.6 0.4 B 0.0 0.4 gn: 13 11 2011-Dec-17 05:16:49 INFO3 from_mock: From MOCK: b5s1g0 rms:A 28.9 28.7 B 30.6 30.4 mn:A -0.3 0.2 B -0.1 0.2 gn: 12 11 2011-Dec-17 05:16:49 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.0 29.3 B 15.4 15.9 mn:A -0.4 0.2 B 0.4 -0.4 gn: 13 31 2011-Dec-17 05:16:49 INFO3 from_mock: From MOCK: b6s1g0 rms:A 32.8 29.8 B 12.4 12.0 mn:A 0.6 0.5 B 0.1 0.0 gn: 14 31 2011-Dec-17 05:16:49 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-17 05:16:49 LOG5 end_task: Level: (5) ID = <10214> Status = 0 0 0 0 ok 2011-Dec-17 05:16:49 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-17 05:16:49 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-17 05:16:49 LOG5 finish_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2011-Dec-17 05:16:49 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-17 05:16:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 05:16:49 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-17 05:16:49 LOG5 end_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2011-Dec-17 05:16:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-17 05:16:49 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-17 05:16:49 LOG5 finish_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2011-Dec-17 05:16:49 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-17 05:16:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 05:16:49 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-17 05:16:49 LOG5 end_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2011-Dec-17 05:16:49 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel Cabrera 2011-Dec-17 05:16:49 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel Cabrera 2011-Dec-17 05:16:49 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel Cabrera 2011-Dec-17 05:16:49 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel Cabrera 2011-Dec-17 05:16:49 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-17 05:16:49 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-17 05:16:49 LOG5 begin_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2011-Dec-17 05:16:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-17 05:16:49 START begin_task: Starting task 'selecting calibration type' 2011-Dec-17 05:16:49 LOG5 begin_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2011-Dec-17 05:16:50 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-17 05:16:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-17 05:16:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 05:16:50 START begin_task: Starting task 'waiting on setcal' 2011-Dec-17 05:16:50 LOG5 begin_task: Level: (5) ID = <10217> Status = 0 0 0 0 ok 2011-Dec-17 05:16:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2011-Dec-17 05:16:50 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-17 05:16:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 05:16:50 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 05:16:50 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-17 05:16:50 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-17 05:16:50 LOG5 end_task: Level: (5) ID = <10217> Status = 0 0 0 0 ok 2011-Dec-17 05:16:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-17 05:16:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-17 05:16:50 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-17 05:16:50 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-17 05:16:50 LOG5 begin_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2011-Dec-17 05:16:50 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 05:16:50 NOTE WAPPDATA-new_file: New FITS file: wapp.20111217.a2048.0004.fits 2011-Dec-17 05:16:50 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111217.a2048.0004.fits} 2011-Dec-17 05:16:51 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-17 05:16:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-17 05:16:51 LOG5 end_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2011-Dec-17 05:16:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-17 05:16:51 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-17 05:16:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-17 05:16:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-17 05:16:51 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-17 05:16:51 LOG5 begin_task: Level: (5) ID = <10219> Status = 0 0 0 0 ok 2011-Dec-17 05:16:51 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-17 05:16:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-17 05:16:51 LOG5 end_task: Level: (5) ID = <10219> Status = 0 0 0 0 ok 2011-Dec-17 05:16:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-17 05:16:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-17 05:16:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-17 05:16:51 LOG5 end_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2011-Dec-17 05:16:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-17 05:16:51 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-17 05:16:51 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-17 05:16:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-17 05:16:51 LOG5 begin_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2011-Dec-17 05:16:51 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-17 05:16:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-17 05:16:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-17 05:16:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-17 05:16:51 LOG5 end_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2011-Dec-17 05:16:51 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-17 05:16:51 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-17 05:16:51 LOG5 begin_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2011-Dec-17 05:16:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-17 05:16:51 LOG5 log_alfabeam: Parameters: 9.8676388888888891 23.504333333333335 10.540980 2011.961588048521 78.299919 2011-Dec-17 05:16:51 LOG4 log_alfabeam: ALFABEAM 0 9.867638888888894 23.504333333333321 2011-Dec-17 05:16:51 LOG4 log_alfabeam: ALFABEAM 1 9.870023686171063 23.411677852882978 2011-Dec-17 05:16:51 LOG4 log_alfabeam: ALFABEAM 2 9.875014378183513 23.473426334738740 2011-Dec-17 05:16:51 LOG4 log_alfabeam: ALFABEAM 3 9.872679617439346 23.566171693383122 2011-Dec-17 05:16:51 LOG4 log_alfabeam: ALFABEAM 4 9.865308739429185 23.597591272980711 2011-Dec-17 05:16:51 LOG4 log_alfabeam: ALFABEAM 5 9.860250145814616 23.534824804371894 2011-Dec-17 05:16:51 LOG4 log_alfabeam: ALFABEAM 6 9.862630684857148 23.441655965402379 2011-Dec-17 05:16:51 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-17 05:16:51 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-17 05:16:51 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Dec-17 05:16:51 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_016 2011-Dec-17 05:16:51 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-17 05:16:51 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-17 05:16:51 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-17 05:16:51 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-17 05:16:51 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-17 05:16:51 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-17 05:16:51 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-17 05:16:51 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-17 05:16:51 LOG3 take_mock_data: PSET configuration: patternid=135100012 2011-Dec-17 05:16:51 LOG3 take_mock_data: PSET configuration: scanid=135100013 2011-Dec-17 05:16:51 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-17 05:16:51 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-17 05:16:51 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-17 05:16:51 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456358506.0 2011-Dec-17 05:16:51 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306358506.0 2011-Dec-17 05:16:51 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-17 05:16:51 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-17 05:16:51 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGES3193_p3_016:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=135100012:scanid=135100013:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456358506.0:topobfreqhz=1306358506.0:filetype=1 2011-Dec-17 05:16:51 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-17 05:16:51 LOG5 begin_task: Level: (5) ID = <10222> Status = 0 0 0 0 ok 2011-Dec-17 05:16:51 LOG4 from_mock: From MOCK: psetok 2011-Dec-17 05:16:51 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-17 05:16:51 LOG5 end_task: Level: (5) ID = <10222> Status = 0 0 0 0 ok 2011-Dec-17 05:16:51 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-17 05:16:51 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-17 05:16:51 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-17 05:16:51 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-17 05:16:51 LOG5 begin_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2011-Dec-17 05:16:51 LOG4 from_mock: From MOCK: starok 2011-Dec-17 05:16:51 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-17 05:16:51 LOG5 end_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2011-Dec-17 05:16:51 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-17 05:16:51 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135100013 2011-Dec-17 05:16:52 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-17 05:16:52 LOG5 begin_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2011-Dec-17 05:16:52 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-17 05:16:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 05:16:52 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-17 05:16:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-17 05:16:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 33413.00 2011-Dec-17 05:16:54 INFO2 got_mock_message: Mock spectrometer start file number is 01200 2011-Dec-17 05:16:54 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-17 05:16:54 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-17 05:16:54 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-17 05:16:54 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-17 05:16:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-17 05:16:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-17 05:16:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-17 05:16:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-17 05:16:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-17 05:16:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-17 05:16:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-17 05:16:54 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-17 05:16:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 05:16:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 05:16:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 05:16:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 05:16:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 05:16:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 05:16:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 05:16:57 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:16:57.01 2011-Dec-17 05:16:57 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324113417.01 Sat Dec 17 05:16:57 2011 2011-Dec-17 05:16:57 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-17 05:16:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.358506 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 05:16:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.358506 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 05:16:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.358506 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 05:16:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.358506 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 05:16:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.358506 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 05:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.535 (still bad) 2011-Dec-17 05:16:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.358506 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 05:16:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.358506 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 05:16:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.358506 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 05:16:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.358506 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 05:16:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 05:17:03 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-17 05:17:03 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-17 05:17:03 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-17 05:17:03 LOG5 end_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2011-Dec-17 05:17:03 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-17 05:17:03 LOG5 end_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2011-Dec-17 05:17:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-17 05:17:03 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-17 05:17:03 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-17 05:17:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-17 05:17:03 LOG5 begin_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2011-Dec-17 05:17:03 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-17 05:17:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-17 05:17:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-17 05:17:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-17 05:17:03 LOG5 end_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2011-Dec-17 05:17:03 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-17 05:17:03 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-17 05:17:03 LOG5 begin_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2011-Dec-17 05:17:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-17 05:17:03 LOG5 log_alfabeam: Parameters: 9.8676388888888891 23.504333333333335 10.544044 2011.9615883970898 78.299919 2011-Dec-17 05:17:03 LOG4 log_alfabeam: ALFABEAM 0 9.867638888888889 23.504333333333335 2011-Dec-17 05:17:03 LOG4 log_alfabeam: ALFABEAM 1 9.870037688084404 23.411745707650155 2011-Dec-17 05:17:03 LOG4 log_alfabeam: ALFABEAM 2 9.875019094862292 23.473639693433778 2011-Dec-17 05:17:03 LOG4 log_alfabeam: ALFABEAM 3 9.872670130736800 23.566318368330400 2011-Dec-17 05:17:03 LOG4 log_alfabeam: ALFABEAM 4 9.865294417014013 23.597522773645107 2011-Dec-17 05:17:03 LOG4 log_alfabeam: ALFABEAM 5 9.860245537647302 23.534612288094504 2011-Dec-17 05:17:03 LOG4 log_alfabeam: ALFABEAM 6 9.862640194754547 23.441513137032004 2011-Dec-17 05:17:03 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-17 05:17:03 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-17 05:17:03 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Dec-17 05:17:03 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_016 2011-Dec-17 05:17:03 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-17 05:17:03 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-17 05:17:03 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-17 05:17:03 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-17 05:17:03 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-17 05:17:03 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-17 05:17:03 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-17 05:17:03 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-17 05:17:03 LOG3 take_mock_data: PSET configuration: patternid=135100012 2011-Dec-17 05:17:03 LOG3 take_mock_data: PSET configuration: scanid=135100014 2011-Dec-17 05:17:03 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-17 05:17:03 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-17 05:17:03 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-17 05:17:03 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456358506.0 2011-Dec-17 05:17:03 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306358506.0 2011-Dec-17 05:17:03 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-17 05:17:03 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-17 05:17:03 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGES3193_p3_016:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=135100012:scanid=135100014:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456358506.0:topobfreqhz=1306358506.0:filetype=1 2011-Dec-17 05:17:03 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-17 05:17:03 LOG5 begin_task: Level: (5) ID = <10227> Status = 0 0 0 0 ok 2011-Dec-17 05:17:03 LOG4 from_mock: From MOCK: psetok 2011-Dec-17 05:17:03 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-17 05:17:03 LOG5 end_task: Level: (5) ID = <10227> Status = 0 0 0 0 ok 2011-Dec-17 05:17:03 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-17 05:17:03 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-17 05:17:03 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-17 05:17:03 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-17 05:17:03 LOG5 begin_task: Level: (5) ID = <10228> Status = 0 0 0 0 ok 2011-Dec-17 05:17:03 LOG4 from_mock: From MOCK: starok 2011-Dec-17 05:17:03 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-17 05:17:03 LOG5 end_task: Level: (5) ID = <10228> Status = 0 0 0 0 ok 2011-Dec-17 05:17:03 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-17 05:17:03 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135100014 2011-Dec-17 05:17:03 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-17 05:17:03 LOG5 begin_task: Level: (5) ID = <10229> Status = 0 0 0 0 ok 2011-Dec-17 05:17:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 05:17:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-17 05:17:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 33424.00 2011-Dec-17 05:17:04 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-17 05:17:04 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-17 05:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.581 (still bad) 2011-Dec-17 05:17:05 INFO2 got_mock_message: Mock spectrometer start file number is 01300 2011-Dec-17 05:17:05 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-17 05:17:05 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-17 05:17:05 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-17 05:17:05 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-17 05:17:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-17 05:17:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-17 05:17:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-17 05:17:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-17 05:17:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-17 05:17:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-17 05:17:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-17 05:17:05 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-17 05:17:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 05:17:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 05:17:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 05:17:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 05:17:06 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 05:17:06 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 05:17:06 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 05:17:09 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:17:09.01 2011-Dec-17 05:17:09 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324113429.01 Sat Dec 17 05:17:09 2011 2011-Dec-17 05:17:09 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-17 05:17:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.358506 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 05:17:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.358506 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 05:17:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.358506 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 05:17:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.358506 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 05:17:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.358506 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 05:17:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.358506 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 05:17:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.358506 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 05:17:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.358506 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 05:17:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.358506 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 05:17:09 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-17 05:17:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 05:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:17:15 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-17 05:17:15 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-17 05:17:15 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-17 05:17:15 LOG5 end_task: Level: (5) ID = <10229> Status = 0 0 0 0 ok 2011-Dec-17 05:17:15 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-17 05:17:15 LOG5 end_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2011-Dec-17 05:17:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-17 05:17:15 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-17 05:17:15 LOG5 finish_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2011-Dec-17 05:17:15 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-17 05:17:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 05:17:15 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-17 05:17:15 LOG5 end_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2011-Dec-17 05:17:15 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-17 05:17:15 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 120.61 and ZA = 10.53 2011-Dec-17 05:17:15 LOG3 track_source: Calling 'track_source AGES3193_p3_016 120.61 10.5314997799 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-17 05:17:15 START begin_task: Starting task 'sending tracking commands' 2011-Dec-17 05:17:15 LOG5 begin_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2011-Dec-17 05:17:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_016} INFO {Slewing to source 'AGES3193_p3_016' ...} 2011-Dec-17 05:17:15 INFO1 track_source: Starting to track AGES3193_p3_016 2011-Dec-17 05:17:15 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_016" 2011-Dec-17 05:17:15 LOG3 vw_send: To DATATAKING: set ra 120.61 2011-Dec-17 05:17:15 LOG3 vw_send: To DATATAKING: set dec 10.5314997799 2011-Dec-17 05:17:15 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-17 05:17:15 LOG3 vw_send: To DATATAKING: pnt tr 120.61 10.5314997799 -CF 2011-Dec-17 05:17:15 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 05:17:15 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-17 05:17:15 LOG5 finish_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2011-Dec-17 05:17:15 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-17 05:17:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 05:17:15 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-17 05:17:15 LOG5 end_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2011-Dec-17 05:17:15 LOG1 fixed_driftmap: Parameters: HA = +00:39:29.5 Start = 10:33:11.7 LST = 10:32:50.6 diff = 21.1 secs 2011-Dec-17 05:17:15 INFO2 fixed_driftmap: Waiting 19.1 seconds for RA 9:53:42 2011-Dec-17 05:17:15 INFO2 lstwait: Waiting for 19.1 secs from LST 10:32:51 to LST 10:33:10 ... 2011-Dec-17 05:17:15 LOG4 send_obs_status: To obs_status: <1> TASKTIME 19.059136098317342 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-17 05:17:15 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-17 05:17:15 LOG5 begin_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2011-Dec-17 05:17:15 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_016" 2011-Dec-17 05:17:15 LOG4 got_cormsg: From DATATAKING: set ra 120.61 2011-Dec-17 05:17:15 LOG4 got_cormsg: From DATATAKING: set dec 10.5314997799 2011-Dec-17 05:17:15 LOG4 got_cormsg: From DATATAKING: vw% 120.61 2011-Dec-17 05:17:15 LOG4 got_cormsg: From DATATAKING: vw% 10.5314997799 2011-Dec-17 05:17:15 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 05:17:15 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-17 05:17:15 LOG4 got_cormsg: From DATATAKING: pnt tr 120.61 10.5314997799 -CF 2011-Dec-17 05:17:15 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 05:17:15 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-17 05:17:15 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 05:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:17:34 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-17 05:17:34 LOG5 end_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2011-Dec-17 05:17:34 LOG4 lstwait: Finished waiting 0.94 seconds late 2011-Dec-17 05:17:34 INFO3 lstwait: Finished waiting 2011-Dec-17 05:17:34 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-17 05:17:34 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-17 05:17:34 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-17 05:17:34 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-17 05:17:34 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-17 05:17:34 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-17 05:17:34 LOG5 begin_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2011-Dec-17 05:17:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-17 05:17:34 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-17 05:17:34 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-17 05:17:34 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-17 05:17:34 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Dec-17 05:17:34 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_016 2011-Dec-17 05:17:34 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-17 05:17:34 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-17 05:17:34 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-17 05:17:34 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-17 05:17:34 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-17 05:17:34 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-17 05:17:34 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-17 05:17:34 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-17 05:17:34 LOG3 take_mock_data: PSET configuration: patternid=135100015 2011-Dec-17 05:17:34 LOG3 take_mock_data: PSET configuration: scanid=135100015 2011-Dec-17 05:17:34 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-17 05:17:34 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-17 05:17:34 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-17 05:17:34 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456358506.0 2011-Dec-17 05:17:34 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306358506.0 2011-Dec-17 05:17:34 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-17 05:17:34 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-17 05:17:34 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGES3193_p3_016:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=135100015:scanid=135100015:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456358506.0:topobfreqhz=1306358506.0:filetype=1 2011-Dec-17 05:17:34 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-17 05:17:34 LOG5 begin_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2011-Dec-17 05:17:34 LOG4 from_mock: From MOCK: psetok 2011-Dec-17 05:17:34 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-17 05:17:34 LOG5 end_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2011-Dec-17 05:17:34 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-17 05:17:34 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-17 05:17:34 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-17 05:17:34 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-17 05:17:34 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2011-Dec-17 05:17:34 LOG4 from_mock: From MOCK: starok 2011-Dec-17 05:17:34 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-17 05:17:34 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2011-Dec-17 05:17:34 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-17 05:17:34 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 135100015 2011-Dec-17 05:17:35 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-17 05:17:35 LOG5 begin_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2011-Dec-17 05:17:35 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-17 05:17:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 05:17:35 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-17 05:17:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-17 05:17:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 33456.00 2011-Dec-17 05:17:36 INFO2 got_mock_message: Mock spectrometer start file number is 01400 2011-Dec-17 05:17:36 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-17 05:17:36 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2011-Dec-17 05:17:36 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-17 05:17:36 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-17 05:17:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-17 05:17:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-17 05:17:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-17 05:17:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-17 05:17:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-17 05:17:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-17 05:17:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-17 05:17:36 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-17 05:17:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 05:17:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 05:17:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 05:17:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 05:17:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 05:17:37 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 05:17:37 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 05:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.358506 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 05:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.358506 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 05:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.358506 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 05:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.358506 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 05:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.358506 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 05:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.358506 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 05:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.358506 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 05:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.358506 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 05:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.358506 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 05:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:17:39 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:17:39.01 2011-Dec-17 05:17:39 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324113459.01 Sat Dec 17 05:17:39 2011 2011-Dec-17 05:17:39 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-17 05:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:17:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:17:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 1.093 0.909 0.955 2011-Dec-17 05:17:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 1.040 1.092 1.120 2011-Dec-17 05:17:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.850 1.122 0.917 1.083 2011-Dec-17 05:17:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 0.014 0.922 0.014 2011-Dec-17 05:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 05:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:18:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:18:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.095 0.910 0.955 2011-Dec-17 05:18:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 1.040 1.095 1.122 2011-Dec-17 05:18:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.849 1.118 0.918 1.085 2011-Dec-17 05:18:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.061 0.014 0.924 0.014 2011-Dec-17 05:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:19:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:19:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.104 1.094 0.911 0.957 2011-Dec-17 05:19:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 1.042 1.094 1.121 2011-Dec-17 05:19:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.849 1.121 0.916 1.086 2011-Dec-17 05:19:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.061 0.014 0.925 0.014 2011-Dec-17 05:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 05:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-17 05:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-17 05:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-17 05:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-17 05:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-17 05:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-17 05:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-17 05:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-17 05:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-17 05:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-17 05:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-17 05:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-17 05:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-17 05:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 05:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 05:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-17 05:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-17 05:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-17 05:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-17 05:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-17 05:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-17 05:20:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:20:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.106 1.093 0.908 0.956 2011-Dec-17 05:20:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 1.041 1.096 1.121 2011-Dec-17 05:20:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.852 1.128 0.923 1.089 2011-Dec-17 05:20:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.014 0.929 0.014 2011-Dec-17 05:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:21:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:21:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 1.091 0.909 0.956 2011-Dec-17 05:21:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.947 1.040 1.095 1.122 2011-Dec-17 05:21:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.848 1.119 0.918 1.087 2011-Dec-17 05:21:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 0.014 0.924 0.014 2011-Dec-17 05:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:22:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:22:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.091 0.909 0.956 2011-Dec-17 05:22:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.947 1.036 1.092 1.120 2011-Dec-17 05:22:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.847 1.118 0.921 1.086 2011-Dec-17 05:22:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 0.014 0.924 0.014 2011-Dec-17 05:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:23:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:23:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 1.090 0.911 0.955 2011-Dec-17 05:23:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.947 1.039 1.093 1.119 2011-Dec-17 05:23:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.848 1.117 0.920 1.086 2011-Dec-17 05:23:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 0.014 0.924 0.014 2011-Dec-17 05:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 05:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 05:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-17 05:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-17 05:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-17 05:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-17 05:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-17 05:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-17 05:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-17 05:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-17 05:24:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:24:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 1.095 0.908 0.954 2011-Dec-17 05:24:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 1.040 1.111 1.138 2011-Dec-17 05:24:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.848 1.120 0.918 1.086 2011-Dec-17 05:24:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.014 0.925 0.014 2011-Dec-17 05:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-17 05:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-17 05:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 05:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 05:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-17 05:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-17 05:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-17 05:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-17 05:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.148 (still bad) 2011-Dec-17 05:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-17 05:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-17 05:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-17 05:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-17 05:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 05:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 05:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-17 05:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-17 05:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-17 05:26:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:26:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.104 1.092 0.909 0.955 2011-Dec-17 05:26:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 1.041 1.093 1.121 2011-Dec-17 05:26:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.852 1.126 0.928 1.096 2011-Dec-17 05:26:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.063 0.014 0.925 0.014 2011-Dec-17 05:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:27:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:27:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.104 1.093 0.911 0.959 2011-Dec-17 05:27:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.947 1.040 1.095 1.119 2011-Dec-17 05:27:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.849 1.120 0.919 1.085 2011-Dec-17 05:27:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.014 0.925 0.014 2011-Dec-17 05:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:28:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:28:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.105 1.089 0.912 0.960 2011-Dec-17 05:28:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.947 1.041 1.095 1.122 2011-Dec-17 05:28:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.849 1.121 0.919 1.088 2011-Dec-17 05:28:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.014 0.927 0.014 2011-Dec-17 05:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:28:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:29:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:29:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.105 1.093 0.910 0.957 2011-Dec-17 05:29:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 1.042 1.094 1.121 2011-Dec-17 05:29:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.849 1.122 0.919 1.086 2011-Dec-17 05:29:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.014 0.927 0.014 2011-Dec-17 05:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:30:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:30:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.112 1.099 0.912 0.959 2011-Dec-17 05:30:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 1.045 1.096 1.124 2011-Dec-17 05:30:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.851 1.126 0.922 1.087 2011-Dec-17 05:30:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.014 0.929 0.014 2011-Dec-17 05:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 05:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 05:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 05:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 05:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 05:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 05:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 05:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 05:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:31:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:31:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.105 1.094 0.910 0.957 2011-Dec-17 05:31:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 1.043 1.098 1.123 2011-Dec-17 05:31:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.849 1.125 0.923 1.089 2011-Dec-17 05:31:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.063 0.014 0.926 0.014 2011-Dec-17 05:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:31:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:32:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:32:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.112 1.100 0.911 0.958 2011-Dec-17 05:32:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 1.041 1.096 1.123 2011-Dec-17 05:32:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.848 1.123 0.921 1.087 2011-Dec-17 05:32:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.014 0.928 0.014 2011-Dec-17 05:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 05:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-17 05:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-17 05:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-17 05:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-17 05:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-17 05:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 05:33:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:33:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.106 1.094 0.913 0.957 2011-Dec-17 05:33:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 1.040 1.100 1.127 2011-Dec-17 05:33:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.852 1.127 0.923 1.090 2011-Dec-17 05:33:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.014 0.929 0.014 2011-Dec-17 05:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-17 05:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-17 05:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-17 05:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-17 05:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-17 05:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-17 05:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-17 05:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-17 05:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-17 05:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-17 05:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-17 05:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-17 05:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-17 05:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-17 05:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 05:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 05:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:34:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:34:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.107 1.096 0.913 0.958 2011-Dec-17 05:34:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.947 1.039 1.096 1.124 2011-Dec-17 05:34:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.849 1.119 0.923 1.089 2011-Dec-17 05:34:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.014 0.927 0.014 2011-Dec-17 05:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:35:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:35:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.108 1.096 0.913 0.958 2011-Dec-17 05:35:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.947 1.042 1.099 1.124 2011-Dec-17 05:35:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.850 1.121 0.922 1.091 2011-Dec-17 05:35:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.014 0.929 0.014 2011-Dec-17 05:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 05:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 05:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 05:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 05:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-17 05:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-17 05:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-17 05:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-17 05:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 05:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 05:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 05:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-17 05:36:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-17 05:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-17 05:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-17 05:36:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-17 05:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-17 05:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 05:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:36:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:36:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.107 1.093 0.913 0.960 2011-Dec-17 05:36:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 1.043 1.098 1.123 2011-Dec-17 05:36:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.851 1.123 0.922 1.091 2011-Dec-17 05:36:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.014 0.929 0.014 2011-Dec-17 05:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 05:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 05:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 05:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 05:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-17 05:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-17 05:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-17 05:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-17 05:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-17 05:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-17 05:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-17 05:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-17 05:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-17 05:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-17 05:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-17 05:37:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:37:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.109 1.097 0.921 0.966 2011-Dec-17 05:37:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 1.040 1.104 1.129 2011-Dec-17 05:37:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.852 1.121 0.922 1.088 2011-Dec-17 05:37:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.069 0.014 0.933 0.014 2011-Dec-17 05:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 05:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 05:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:37:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 05:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 05:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 05:37:40 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-17 05:37:40 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-17 05:37:40 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-17 05:37:40 LOG5 end_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2011-Dec-17 05:37:40 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-17 05:37:40 LOG5 end_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2011-Dec-17 05:37:40 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-17 05:37:40 LOG5 finish_task: Level: (2) ID = <10193> Status = 0 0 0 0 ok 2011-Dec-17 05:37:40 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-17 05:37:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-17 05:37:40 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-17 05:37:40 LOG5 end_task: Level: (2) ID = <10193> Status = 0 0 0 0 ok 2011-Dec-17 05:37:40 COMMAND run_command_line: EXECUTING command 41: 'ENDIF' 2011-Dec-17 05:37:40 COMMAND run_command_line: EXECUTING command 44: 'IF LSTSLEW(AGES3193_p3_018) < 105641 THEN' 2011-Dec-17 05:37:40 LOG3 is_if_valid: Current source data: up 112.5 14.8 UP - - 22 1.8 2011-Dec-17 05:37:40 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_018) < 105641 2011-Dec-17 05:37:40 INFO5 is_if_valid: Condition parsed as: 10.918595 < 10.944722222222222 2011-Dec-17 05:37:40 COMMAND run_command_line: EXECUTING command 45: 'FIXEDDRIFT az=111.63 alfaangle=-89.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_018 ra=95300.00 dec=232730.00' 2011-Dec-17 05:37:40 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-17 05:37:41 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-17 05:37:41 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 111.63 -89.3 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_018 95300.00 232730.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-17 05:37:41 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-17 05:37:41 LOG5 begin_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2011-Dec-17 05:37:41 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_016' 2011-Dec-17 05:37:41 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-17 05:37:41 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_018} 2011-Dec-17 05:37:41 INFO3 fixed_driftmap: Sending telescope to Az = 111.63 and ZA = 15.54 2011-Dec-17 05:37:41 LOG3 track_source: Calling 'track_source AGES3193_p3_018 111.63 15.5418698919 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-17 05:37:41 START begin_task: Starting task 'sending tracking commands' 2011-Dec-17 05:37:41 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2011-Dec-17 05:37:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_018} INFO {Slewing to source 'AGES3193_p3_018' ...} 2011-Dec-17 05:37:41 INFO1 track_source: Starting to track AGES3193_p3_018 2011-Dec-17 05:37:41 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_018" 2011-Dec-17 05:37:41 LOG3 vw_send: To DATATAKING: set ra 111.63 2011-Dec-17 05:37:41 LOG3 vw_send: To DATATAKING: set dec 15.5418698919 2011-Dec-17 05:37:41 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-17 05:37:41 LOG3 vw_send: To DATATAKING: pnt tr 111.63 15.5418698919 -CF 2011-Dec-17 05:37:41 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 05:37:41 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-17 05:37:41 LOG5 finish_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2011-Dec-17 05:37:41 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-17 05:37:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 05:37:41 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-17 05:37:41 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2011-Dec-17 05:37:41 START begin_task: Starting task 'rotate ALFA to -89.3 degrees' 2011-Dec-17 05:37:41 LOG5 begin_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2011-Dec-17 05:37:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -89.3 degrees ...} 2011-Dec-17 05:37:41 INFO2 rotate_alfa: ALFA commanded to -89.3 degrees 2011-Dec-17 05:37:41 LOG3 sock_errsend: To ALFAMOTOR: POSITION -89.3 REPLY 2011-Dec-17 05:37:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-17 05:37:41 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-17 05:37:41 LOG5 begin_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2011-Dec-17 05:37:41 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_018" 2011-Dec-17 05:37:41 LOG4 got_cormsg: From DATATAKING: set ra 111.63 2011-Dec-17 05:37:41 LOG4 got_cormsg: From DATATAKING: set dec 15.5418698919 2011-Dec-17 05:37:41 LOG4 got_cormsg: From DATATAKING: vw% 111.63 2011-Dec-17 05:37:41 LOG4 got_cormsg: From DATATAKING: vw% 15.5418698919 2011-Dec-17 05:37:41 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 05:37:41 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-17 05:37:41 LOG4 got_cormsg: From DATATAKING: pnt tr 111.63 15.5418698919 -CF 2011-Dec-17 05:37:41 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 05:37:41 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-17 05:37:41 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 05:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 05:39:14 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-17 05:39:14 INFO3 alfa_motor: ALFA rotator in-position -89.30 degrees 2011-Dec-17 05:39:14 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-17 05:39:14 LOG5 end_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2011-Dec-17 05:39:14 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-17 05:39:14 STOP finish_task: Finishing task 'rotate ALFA to -89.3 degrees' 2011-Dec-17 05:39:14 LOG5 finish_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2011-Dec-17 05:39:14 INFO2 finish_task: DONE finished configuration: rotating ALFA to -89.3 degrees 2011-Dec-17 05:39:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 05:39:14 STOP end_task: Finishing task 'rotate ALFA to -89.3 degrees' with status 'OK' 2011-Dec-17 05:39:14 LOG5 end_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2011-Dec-17 05:39:14 START begin_task: Starting task 'waiting on telescope' 2011-Dec-17 05:39:14 LOG5 begin_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2011-Dec-17 05:39:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-17 05:39:14 LOG3 waittrk: Start waittrk 5 2011-Dec-17 05:39:14 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-17 05:39:14 LOG5 begin_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2011-Dec-17 05:39:19 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-17 05:39:19 LOG5 end_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2011-Dec-17 05:39:19 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-17 05:39:19 LOG5 begin_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2011-Dec-17 05:39:52 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-17 05:39:52 LOG5 end_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2011-Dec-17 05:39:52 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-17 05:39:52 INFO2 waittrk: Now tracking AGES3193_p3_018 2011-Dec-17 05:39:52 LOG4 waittrk: Current telescope position: Az = 111.37 ZA = 15.56 2011-Dec-17 05:39:52 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-17 05:39:52 LOG5 finish_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2011-Dec-17 05:39:52 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-17 05:39:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 05:39:52 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-17 05:39:52 LOG5 end_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2011-Dec-17 05:39:52 START begin_task: Starting task 'selecting calibration type' 2011-Dec-17 05:39:52 LOG5 begin_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2011-Dec-17 05:39:52 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-17 05:39:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-17 05:39:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 05:39:52 START begin_task: Starting task 'waiting on setcal' 2011-Dec-17 05:39:52 LOG5 begin_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2011-Dec-17 05:39:52 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-17 05:39:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 05:39:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 05:39:53 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-17 05:39:53 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-17 05:39:53 LOG5 end_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2011-Dec-17 05:39:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-17 05:39:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-17 05:39:53 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-17 05:39:53 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-17 05:39:53 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2011-Dec-17 05:39:53 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 05:39:53 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-17 05:39:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-17 05:39:53 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2011-Dec-17 05:39:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-17 05:39:53 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-17 05:39:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-17 05:39:53 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-17 05:39:53 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-17 05:39:53 LOG5 begin_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2011-Dec-17 05:39:53 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-17 05:39:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-17 05:39:53 LOG5 end_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2011-Dec-17 05:39:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-17 05:39:53 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-17 05:39:53 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-17 05:39:53 LOG5 end_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2011-Dec-17 05:39:53 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Dec-17 05:39:53 INFO2 astwait: Waiting for 8 seconds from 09:39:53 to 09:40:01 UTC ... 2011-Dec-17 05:39:53 LOG4 send_obs_status: To obs_status: <1> TASKTIME 8 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-17 05:39:53 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Dec-17 05:39:53 LOG5 begin_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2011-Dec-17 05:40:01 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Dec-17 05:40:01 LOG5 end_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2011-Dec-17 05:40:01 INFO3 astwait: Finished waiting 2011-Dec-17 05:40:01 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-17 05:40:01 LOG5 dopset_later: Calling 'dopset_later 60.962575618089801' 2011-Dec-17 05:40:01 INFO3 dopset_later: Setting Doppler correction for 05:41:01 (61 seconds from now) 2011-Dec-17 05:40:01 LOG5 antvel: Calling 'antvel 111.630000 15.541870 F Heliocentric 60.962575618089801' 2011-Dec-17 05:40:01 LOG2 antvel: Transforming current Az = 111.63 ZA = 15.54 to apparent RA = 09:53:42.0 Dec = +23:23:52.1 2011-Dec-17 05:40:01 LOG2 antvel: Parameters to Doppler: Heliocentric 34861 2011 351 0.0 2011-Dec-17 05:40:01 INFO5 antvel: Computed antenna velocity: -24.93851 km/s 2011-Dec-17 05:40:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-24.9385071763 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-17 05:40:01 INFO4 dopset_gen: New sky frequencies: 1381.358338 1381.358338 1381.358338 1381.358338 1381.358338 1381.358338 1381.358338 1381.358338 1381.358338 2011-Dec-17 05:40:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.358338 sky0=1381.358338 sky1=1381.358338 sky2=1381.358338 sky3=1381.358338 sky4=1381.358338 sky5=1381.358338 sky6=1381.358338 sky7=1381.358338 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-17 05:40:01 LOG2 dopset_gen: Result from 'sky2syn': 1631.358338 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-17 05:40:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631358338.0} 2011-Dec-17 05:40:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 05:40:01 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-17 05:40:01 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-17 05:40:01 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.6 Dec = +23:27:15.6 2011-Dec-17 05:40:01 LOG3 track_source: Calling 'track_source AGES3193_p3_018 095203.6 232715.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-17 05:40:01 START begin_task: Starting task 'sending tracking commands' 2011-Dec-17 05:40:01 LOG5 begin_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2011-Dec-17 05:40:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_018} INFO {Slewing to source 'AGES3193_p3_018' ...} 2011-Dec-17 05:40:01 INFO1 track_source: Starting to track AGES3193_p3_018 2011-Dec-17 05:40:01 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_018" 2011-Dec-17 05:40:01 LOG3 vw_send: To DATATAKING: set ra 095203.6 2011-Dec-17 05:40:01 LOG3 vw_send: To DATATAKING: set dec 232715.6 2011-Dec-17 05:40:01 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-17 05:40:01 LOG3 vw_send: To DATATAKING: pnt tr 095203.6 232715.6 -CJ 2011-Dec-17 05:40:01 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 05:40:01 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-17 05:40:01 LOG5 finish_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2011-Dec-17 05:40:01 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-17 05:40:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 05:40:01 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-17 05:40:01 LOG5 end_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2011-Dec-17 05:40:01 START begin_task: Starting task 'waiting on telescope' 2011-Dec-17 05:40:01 LOG5 begin_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2011-Dec-17 05:40:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-17 05:40:01 LOG3 waittrk: Start waittrk 5 2011-Dec-17 05:40:01 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-17 05:40:01 LOG5 begin_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2011-Dec-17 05:40:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631358338.0} 2011-Dec-17 05:40:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 05:40:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 05:40:01 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_018" 2011-Dec-17 05:40:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 05:40:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 05:40:01 LOG4 got_cormsg: From DATATAKING: set ra 095203.6 2011-Dec-17 05:40:01 LOG4 got_cormsg: From DATATAKING: set dec 232715.6 2011-Dec-17 05:40:01 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-17 05:40:01 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.6 232715.6 -CJ 2011-Dec-17 05:40:01 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 05:40:01 LOG4 got_cormsg: From DATATAKING: 095203.6 2011-Dec-17 05:40:01 LOG4 got_cormsg: From DATATAKING: vw% 232715.6 2011-Dec-17 05:40:01 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2011-Dec-17 05:40:06 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-17 05:40:06 LOG5 end_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2011-Dec-17 05:40:06 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-17 05:40:06 LOG5 begin_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2011-Dec-17 05:40:08 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-17 05:40:08 LOG5 end_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2011-Dec-17 05:40:08 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-17 05:40:08 INFO2 waittrk: Now tracking AGES3193_p3_018 2011-Dec-17 05:40:08 LOG4 waittrk: Current telescope position: Az = 111.33 ZA = 15.57 2011-Dec-17 05:40:08 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-17 05:40:08 LOG5 finish_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2011-Dec-17 05:40:08 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-17 05:40:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 05:40:08 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-17 05:40:08 LOG5 end_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2011-Dec-17 05:40:08 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-17 05:40:08 LOG5 begin_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2011-Dec-17 05:40:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-17 05:40:08 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-17 05:40:08 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-17 05:40:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-17 05:40:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 05:40:08 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-17 05:40:08 LOG5 begin_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2011-Dec-17 05:40:08 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-17 05:40:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 05:40:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 05:40:09 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-17 05:40:09 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-17 05:40:09 LOG5 end_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2011-Dec-17 05:40:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-17 05:40:09 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-17 05:40:09 LOG5 begin_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2011-Dec-17 05:40:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-17 05:40:09 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-17 05:40:09 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-17 05:40:09 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-17 05:40:09 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-17 05:40:09 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-17 05:40:09 LOG5 begin_task: Level: (5) ID = <10255> Status = 0 0 0 0 ok 2011-Dec-17 05:40:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 05:40:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-17 05:40:09 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 8 6 dB 2011-Dec-17 05:40:09 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 3 4 dB 2011-Dec-17 05:40:09 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 3 dB 2011-Dec-17 05:40:09 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2011-Dec-17 05:40:09 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-17 05:40:09 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-17 05:40:09 LOG5 end_task: Level: (5) ID = <10255> Status = 0 0 0 0 ok 2011-Dec-17 05:40:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.927 0.898 ALFA beam 1: 0.959 0.953 2011-Dec-17 05:40:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.974 1.083 ALFA beam 3: 1.115 0.953 2011-Dec-17 05:40:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.875 0.984 ALFA beam 5: 1.031 0.920 2011-Dec-17 05:40:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.927 0.014 ALFA beam 7: 1.010 0.014 2011-Dec-17 05:40:09 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-17 05:40:09 LOG5 finish_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2011-Dec-17 05:40:09 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-17 05:40:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 05:40:09 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-17 05:40:09 LOG5 end_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2011-Dec-17 05:40:09 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-17 05:40:09 LOG5 begin_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2011-Dec-17 05:40:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-17 05:40:09 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-17 05:40:09 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-17 05:40:09 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-17 05:40:09 LOG5 begin_task: Level: (5) ID = <10257> Status = 0 0 0 0 ok 2011-Dec-17 05:40:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:40:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 0.898 0.959 0.953 2011-Dec-17 05:40:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.974 1.083 1.115 0.953 2011-Dec-17 05:40:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.875 0.984 1.031 0.920 2011-Dec-17 05:40:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.927 0.014 1.010 0.014 2011-Dec-17 05:40:15 INFO3 from_mock: From MOCK: b0s0g0 rms:A 32.3 28.4 B 31.2 31.2 mn:A -0.0 -0.1 B -0.3 -0.3 gn: 11 11 2011-Dec-17 05:40:15 INFO3 from_mock: From MOCK: b0s1g0 rms:A 29.7 28.4 B 29.2 31.0 mn:A 0.1 -0.5 B -0.5 0.2 gn: 11 11 2011-Dec-17 05:40:15 INFO3 from_mock: From MOCK: b1s0g0 rms:A 31.4 29.4 B 33.4 29.2 mn:A 0.6 0.7 B 0.1 -0.1 gn: 7 11 2011-Dec-17 05:40:15 INFO3 from_mock: From MOCK: b1s1g0 rms:A 32.5 29.9 B 28.6 28.6 mn:A -0.3 -0.3 B 0.5 0.2 gn: 8 9 2011-Dec-17 05:40:15 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.5 28.6 B 29.4 30.7 mn:A -0.1 -0.4 B 0.3 0.0 gn: 10 11 2011-Dec-17 05:40:15 INFO3 from_mock: From MOCK: b2s1g0 rms:A 31.6 31.9 B 30.8 28.6 mn:A 0.2 -0.3 B 0.1 0.3 gn: 11 11 2011-Dec-17 05:40:15 INFO3 from_mock: From MOCK: b3s0g0 rms:A 29.8 29.5 B 32.2 28.7 mn:A 0.5 -0.2 B 0.0 -0.2 gn: 12 12 2011-Dec-17 05:40:15 INFO3 from_mock: From MOCK: b3s1g0 rms:A 31.4 30.7 B 31.0 32.3 mn:A -0.3 0.4 B 0.1 0.1 gn: 12 12 2011-Dec-17 05:40:15 INFO3 from_mock: From MOCK: b4s0g0 rms:A 31.2 30.3 B 29.7 29.9 mn:A -0.3 -0.3 B -0.3 -0.0 gn: 13 11 2011-Dec-17 05:40:15 INFO3 from_mock: From MOCK: b4s1g0 rms:A 30.9 27.9 B 29.8 28.8 mn:A -0.1 0.0 B -0.3 0.1 gn: 15 12 2011-Dec-17 05:40:15 INFO3 from_mock: From MOCK: b5s0g0 rms:A 30.7 29.6 B 28.9 28.9 mn:A 0.4 0.4 B 0.0 0.4 gn: 12 10 2011-Dec-17 05:40:15 INFO3 from_mock: From MOCK: b5s1g0 rms:A 32.2 32.0 B 29.3 29.0 mn:A -0.3 0.2 B -0.1 0.2 gn: 12 10 2011-Dec-17 05:40:15 INFO3 from_mock: From MOCK: b6s0g0 rms:A 29.9 27.4 B 15.4 15.9 mn:A -0.5 0.1 B 0.4 -0.4 gn: 12 31 2011-Dec-17 05:40:15 INFO3 from_mock: From MOCK: b6s1g0 rms:A 31.4 28.6 B 12.4 12.1 mn:A 0.7 0.5 B 0.0 0.1 gn: 13 31 2011-Dec-17 05:40:15 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-17 05:40:15 LOG5 end_task: Level: (5) ID = <10257> Status = 0 0 0 0 ok 2011-Dec-17 05:40:15 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-17 05:40:15 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-17 05:40:15 LOG5 finish_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2011-Dec-17 05:40:15 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-17 05:40:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 05:40:15 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-17 05:40:15 LOG5 end_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2011-Dec-17 05:40:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-17 05:40:15 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-17 05:40:15 LOG5 finish_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2011-Dec-17 05:40:15 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-17 05:40:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 05:40:15 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-17 05:40:15 LOG5 end_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2011-Dec-17 05:40:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel Cabrera 2011-Dec-17 05:40:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel Cabrera 2011-Dec-17 05:40:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel Cabrera 2011-Dec-17 05:40:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel Cabrera 2011-Dec-17 05:40:15 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-17 05:40:15 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-17 05:40:15 LOG5 begin_task: Level: (3) ID = <10258> Status = 0 0 0 0 ok 2011-Dec-17 05:40:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-17 05:40:15 START begin_task: Starting task 'selecting calibration type' 2011-Dec-17 05:40:15 LOG5 begin_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2011-Dec-17 05:40:15 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-17 05:40:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-17 05:40:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 05:40:15 START begin_task: Starting task 'waiting on setcal' 2011-Dec-17 05:40:15 LOG5 begin_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2011-Dec-17 05:40:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2011-Dec-17 05:40:16 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-17 05:40:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 05:40:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 05:40:16 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-17 05:40:16 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-17 05:40:16 LOG5 end_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2011-Dec-17 05:40:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-17 05:40:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-17 05:40:16 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-17 05:40:16 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-17 05:40:16 LOG5 begin_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2011-Dec-17 05:40:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 05:40:16 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-17 05:40:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-17 05:40:16 LOG5 end_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2011-Dec-17 05:40:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-17 05:40:16 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-17 05:40:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-17 05:40:16 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-17 05:40:16 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-17 05:40:16 LOG5 begin_task: Level: (5) ID = <10262> Status = 0 0 0 0 ok 2011-Dec-17 05:40:16 NOTE WAPPDATA-new_file: New FITS file: wapp.20111217.a2048.0005.fits 2011-Dec-17 05:40:16 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-17 05:40:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-17 05:40:16 LOG5 end_task: Level: (5) ID = <10262> Status = 0 0 0 0 ok 2011-Dec-17 05:40:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-17 05:40:16 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-17 05:40:16 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-17 05:40:16 LOG5 end_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2011-Dec-17 05:40:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-17 05:40:16 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-17 05:40:16 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-17 05:40:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-17 05:40:16 LOG5 begin_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2011-Dec-17 05:40:16 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111217.a2048.0005.fits} 2011-Dec-17 05:40:16 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-17 05:40:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-17 05:40:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-17 05:40:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-17 05:40:16 LOG5 end_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2011-Dec-17 05:40:16 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-17 05:40:16 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-17 05:40:16 LOG5 begin_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2011-Dec-17 05:40:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-17 05:40:16 LOG5 log_alfabeam: Parameters: 9.8676666666666684 23.454333333333334 10.932326 2011.9616325702843 -89.300056 2011-Dec-17 05:40:16 LOG4 log_alfabeam: ALFABEAM 0 9.867666666666670 23.454333333333341 2011-Dec-17 05:40:16 LOG4 log_alfabeam: ALFABEAM 1 9.865619824405996 23.545475852527968 2011-Dec-17 05:40:16 LOG4 log_alfabeam: ALFABEAM 2 9.860231772268786 23.484547219893681 2011-Dec-17 05:40:16 LOG4 log_alfabeam: ALFABEAM 3 9.862308562888980 23.393298880370246 2011-Dec-17 05:40:16 LOG4 log_alfabeam: ALFABEAM 4 9.869748795231999 23.363576724130748 2011-Dec-17 05:40:16 LOG4 log_alfabeam: ALFABEAM 5 9.875098457656287 23.424054529285364 2011-Dec-17 05:40:16 LOG4 log_alfabeam: ALFABEAM 6 9.873046072682802 23.514705708315663 2011-Dec-17 05:40:16 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-17 05:40:16 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-17 05:40:16 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Dec-17 05:40:16 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_018 2011-Dec-17 05:40:16 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-17 05:40:16 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-17 05:40:16 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-17 05:40:16 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-17 05:40:16 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-17 05:40:16 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-17 05:40:16 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-17 05:40:16 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-17 05:40:16 LOG3 take_mock_data: PSET configuration: patternid=135100015 2011-Dec-17 05:40:16 LOG3 take_mock_data: PSET configuration: scanid=135100016 2011-Dec-17 05:40:16 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-17 05:40:16 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-17 05:40:16 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-17 05:40:16 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456358338.0 2011-Dec-17 05:40:16 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306358338.0 2011-Dec-17 05:40:16 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-17 05:40:16 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-17 05:40:16 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGES3193_p3_018:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=135100015:scanid=135100016:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456358338.0:topobfreqhz=1306358338.0:filetype=1 2011-Dec-17 05:40:16 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-17 05:40:16 LOG5 begin_task: Level: (5) ID = <10265> Status = 0 0 0 0 ok 2011-Dec-17 05:40:16 LOG4 from_mock: From MOCK: psetok 2011-Dec-17 05:40:16 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-17 05:40:16 LOG5 end_task: Level: (5) ID = <10265> Status = 0 0 0 0 ok 2011-Dec-17 05:40:16 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-17 05:40:16 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-17 05:40:17 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-17 05:40:17 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-17 05:40:17 LOG5 begin_task: Level: (5) ID = <10266> Status = 0 0 0 0 ok 2011-Dec-17 05:40:17 LOG4 from_mock: From MOCK: starok 2011-Dec-17 05:40:17 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-17 05:40:17 LOG5 end_task: Level: (5) ID = <10266> Status = 0 0 0 0 ok 2011-Dec-17 05:40:17 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-17 05:40:17 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135100016 2011-Dec-17 05:40:17 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-17 05:40:17 LOG5 begin_task: Level: (5) ID = <10267> Status = 0 0 0 0 ok 2011-Dec-17 05:40:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 05:40:17 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-17 05:40:17 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-17 05:40:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-17 05:40:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 34818.00 2011-Dec-17 05:40:19 INFO2 got_mock_message: Mock spectrometer start file number is 01500 2011-Dec-17 05:40:19 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-17 05:40:19 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-17 05:40:19 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-17 05:40:19 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-17 05:40:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-17 05:40:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-17 05:40:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-17 05:40:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-17 05:40:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-17 05:40:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-17 05:40:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-17 05:40:19 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-17 05:40:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 05:40:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 05:40:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 05:40:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 05:40:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 05:40:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 05:40:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 05:40:22 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:40:22.00 2011-Dec-17 05:40:22 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324114822.00 Sat Dec 17 05:40:22 2011 2011-Dec-17 05:40:22 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-17 05:40:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.358338 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 05:40:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.358338 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 05:40:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.358338 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 05:40:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.358338 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 05:40:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.358338 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 05:40:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.358338 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 05:40:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.358338 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 05:40:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.358338 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 05:40:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.358338 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 05:40:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 05:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.531 (still bad) 2011-Dec-17 05:40:28 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-17 05:40:28 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-17 05:40:28 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-17 05:40:28 LOG5 end_task: Level: (5) ID = <10267> Status = 0 0 0 0 ok 2011-Dec-17 05:40:28 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-17 05:40:28 LOG5 end_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2011-Dec-17 05:40:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-17 05:40:28 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-17 05:40:28 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-17 05:40:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-17 05:40:28 LOG5 begin_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2011-Dec-17 05:40:28 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-17 05:40:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-17 05:40:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-17 05:40:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-17 05:40:28 LOG5 end_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2011-Dec-17 05:40:28 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-17 05:40:28 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-17 05:40:28 LOG5 begin_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2011-Dec-17 05:40:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-17 05:40:28 LOG5 log_alfabeam: Parameters: 9.8676666666666684 23.454333333333334 10.935390 2011.9616329188532 -89.300056 2011-Dec-17 05:40:28 LOG4 log_alfabeam: ALFABEAM 0 9.867666666666668 23.454333333333345 2011-Dec-17 05:40:28 LOG4 log_alfabeam: ALFABEAM 1 9.865612883037118 23.545445988829776 2011-Dec-17 05:40:28 LOG4 log_alfabeam: ALFABEAM 2 9.860229495726905 23.484440823136538 2011-Dec-17 05:40:28 LOG4 log_alfabeam: ALFABEAM 3 9.862313153594055 23.393223107896013 2011-Dec-17 05:40:28 LOG4 log_alfabeam: ALFABEAM 4 9.869755594472277 23.363606021246973 2011-Dec-17 05:40:28 LOG4 log_alfabeam: ALFABEAM 5 9.875100743228707 23.424160842658797 2011-Dec-17 05:40:28 LOG4 log_alfabeam: ALFABEAM 6 9.873041486100458 23.514783478929431 2011-Dec-17 05:40:28 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-17 05:40:28 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-17 05:40:28 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Dec-17 05:40:28 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_018 2011-Dec-17 05:40:28 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-17 05:40:28 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-17 05:40:28 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-17 05:40:28 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-17 05:40:28 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-17 05:40:28 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-17 05:40:28 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-17 05:40:28 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-17 05:40:28 LOG3 take_mock_data: PSET configuration: patternid=135100015 2011-Dec-17 05:40:28 LOG3 take_mock_data: PSET configuration: scanid=135100017 2011-Dec-17 05:40:28 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-17 05:40:28 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-17 05:40:28 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-17 05:40:28 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456358338.0 2011-Dec-17 05:40:28 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306358338.0 2011-Dec-17 05:40:28 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-17 05:40:28 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-17 05:40:28 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGES3193_p3_018:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=135100015:scanid=135100017:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456358338.0:topobfreqhz=1306358338.0:filetype=1 2011-Dec-17 05:40:28 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-17 05:40:28 LOG5 begin_task: Level: (5) ID = <10270> Status = 0 0 0 0 ok 2011-Dec-17 05:40:28 LOG4 from_mock: From MOCK: psetok 2011-Dec-17 05:40:28 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-17 05:40:28 LOG5 end_task: Level: (5) ID = <10270> Status = 0 0 0 0 ok 2011-Dec-17 05:40:28 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-17 05:40:28 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-17 05:40:28 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-17 05:40:28 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-17 05:40:28 LOG5 begin_task: Level: (5) ID = <10271> Status = 0 0 0 0 ok 2011-Dec-17 05:40:28 LOG4 from_mock: From MOCK: starok 2011-Dec-17 05:40:28 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-17 05:40:28 LOG5 end_task: Level: (5) ID = <10271> Status = 0 0 0 0 ok 2011-Dec-17 05:40:28 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-17 05:40:28 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135100017 2011-Dec-17 05:40:28 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-17 05:40:28 LOG5 begin_task: Level: (5) ID = <10272> Status = 0 0 0 0 ok 2011-Dec-17 05:40:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 05:40:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-17 05:40:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 34829.00 2011-Dec-17 05:40:29 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-17 05:40:29 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-17 05:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.531 (still bad) 2011-Dec-17 05:40:31 INFO2 got_mock_message: Mock spectrometer start file number is 01600 2011-Dec-17 05:40:31 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-17 05:40:31 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-17 05:40:31 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-17 05:40:31 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-17 05:40:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-17 05:40:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-17 05:40:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-17 05:40:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-17 05:40:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-17 05:40:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-17 05:40:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-17 05:40:31 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-17 05:40:31 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 05:40:31 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 05:40:31 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 05:40:31 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 05:40:31 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 05:40:31 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 05:40:31 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-17 05:40:34 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:40:34.01 2011-Dec-17 05:40:34 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324114834.01 Sat Dec 17 05:40:34 2011 2011-Dec-17 05:40:34 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-17 05:40:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.358338 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 05:40:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.358338 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 05:40:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.358338 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 05:40:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.358338 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 05:40:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.358338 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 05:40:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.358338 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 05:40:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.358338 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 05:40:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.358338 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 05:40:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.358338 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 05:40:34 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-17 05:40:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 05:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:40:40 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-17 05:40:40 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-17 05:40:40 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-17 05:40:40 LOG5 end_task: Level: (5) ID = <10272> Status = 0 0 0 0 ok 2011-Dec-17 05:40:40 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-17 05:40:40 LOG5 end_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2011-Dec-17 05:40:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-17 05:40:40 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-17 05:40:40 LOG5 finish_task: Level: (3) ID = <10258> Status = 0 0 0 0 ok 2011-Dec-17 05:40:40 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-17 05:40:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 05:40:40 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-17 05:40:40 LOG5 end_task: Level: (3) ID = <10258> Status = 0 0 0 0 ok 2011-Dec-17 05:40:40 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-17 05:40:40 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 111.63 and ZA = 15.54 2011-Dec-17 05:40:40 LOG3 track_source: Calling 'track_source AGES3193_p3_018 111.63 15.5418698919 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-17 05:40:40 START begin_task: Starting task 'sending tracking commands' 2011-Dec-17 05:40:40 LOG5 begin_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2011-Dec-17 05:40:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_018} INFO {Slewing to source 'AGES3193_p3_018' ...} 2011-Dec-17 05:40:40 INFO1 track_source: Starting to track AGES3193_p3_018 2011-Dec-17 05:40:40 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_018" 2011-Dec-17 05:40:40 LOG3 vw_send: To DATATAKING: set ra 111.63 2011-Dec-17 05:40:40 LOG3 vw_send: To DATATAKING: set dec 15.5418698919 2011-Dec-17 05:40:40 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-17 05:40:40 LOG3 vw_send: To DATATAKING: pnt tr 111.63 15.5418698919 -CF 2011-Dec-17 05:40:40 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 05:40:40 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-17 05:40:40 LOG5 finish_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2011-Dec-17 05:40:40 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-17 05:40:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 05:40:40 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-17 05:40:40 LOG5 end_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2011-Dec-17 05:40:40 LOG1 fixed_driftmap: Parameters: HA = +01:02:59.3 Start = 10:56:41.5 LST = 10:56:19.4 diff = 22.0 secs 2011-Dec-17 05:40:40 INFO2 fixed_driftmap: Waiting 20 seconds for RA 9:53:42 2011-Dec-17 05:40:40 INFO2 lstwait: Waiting for 20 secs from LST 10:56:19 to LST 10:56:39 ... 2011-Dec-17 05:40:40 LOG4 send_obs_status: To obs_status: <1> TASKTIME 19.968013624807654 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-17 05:40:40 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-17 05:40:40 LOG5 begin_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2011-Dec-17 05:40:40 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_018" 2011-Dec-17 05:40:40 LOG4 got_cormsg: From DATATAKING: set ra 111.63 2011-Dec-17 05:40:40 LOG4 got_cormsg: From DATATAKING: set dec 15.5418698919 2011-Dec-17 05:40:40 LOG4 got_cormsg: From DATATAKING: vw% 111.63 2011-Dec-17 05:40:40 LOG4 got_cormsg: From DATATAKING: vw% 15.5418698919 2011-Dec-17 05:40:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 05:40:40 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-17 05:40:40 LOG4 got_cormsg: From DATATAKING: pnt tr 111.63 15.5418698919 -CF 2011-Dec-17 05:40:40 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-17 05:40:40 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-17 05:40:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 05:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:41:00 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-17 05:41:00 LOG5 end_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2011-Dec-17 05:41:00 LOG4 lstwait: Finished waiting 1.04 seconds late 2011-Dec-17 05:41:00 INFO3 lstwait: Finished waiting 2011-Dec-17 05:41:00 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-17 05:41:00 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-17 05:41:00 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-17 05:41:00 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-17 05:41:00 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-17 05:41:00 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-17 05:41:00 LOG5 begin_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2011-Dec-17 05:41:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-17 05:41:00 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-17 05:41:00 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-17 05:41:00 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-17 05:41:00 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Dec-17 05:41:00 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_018 2011-Dec-17 05:41:00 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-17 05:41:00 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-17 05:41:00 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-17 05:41:00 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-17 05:41:00 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-17 05:41:00 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-17 05:41:00 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-17 05:41:00 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-17 05:41:00 LOG3 take_mock_data: PSET configuration: patternid=135100018 2011-Dec-17 05:41:00 LOG3 take_mock_data: PSET configuration: scanid=135100018 2011-Dec-17 05:41:00 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-17 05:41:00 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-17 05:41:00 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-17 05:41:00 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456358338.0 2011-Dec-17 05:41:00 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306358338.0 2011-Dec-17 05:41:00 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-17 05:41:00 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-17 05:41:00 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGES3193_p3_018:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=135100018:scanid=135100018:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456358338.0:topobfreqhz=1306358338.0:filetype=1 2011-Dec-17 05:41:00 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-17 05:41:00 LOG5 begin_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2011-Dec-17 05:41:00 LOG4 from_mock: From MOCK: psetok 2011-Dec-17 05:41:00 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-17 05:41:00 LOG5 end_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2011-Dec-17 05:41:00 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-17 05:41:00 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-17 05:41:00 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-17 05:41:00 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-17 05:41:00 LOG5 begin_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2011-Dec-17 05:41:00 LOG4 from_mock: From MOCK: starok 2011-Dec-17 05:41:00 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-17 05:41:00 LOG5 end_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2011-Dec-17 05:41:00 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-17 05:41:00 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 135100018 2011-Dec-17 05:41:01 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-17 05:41:01 LOG5 begin_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2011-Dec-17 05:41:01 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-17 05:41:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 05:41:01 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-17 05:41:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-17 05:41:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 34862.00 2011-Dec-17 05:41:02 INFO2 got_mock_message: Mock spectrometer start file number is 01700 2011-Dec-17 05:41:02 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-17 05:41:02 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1199.9 s 2011-Dec-17 05:41:02 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-17 05:41:02 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-17 05:41:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-17 05:41:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-17 05:41:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-17 05:41:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-17 05:41:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-17 05:41:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-17 05:41:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-17 05:41:02 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-17 05:41:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 05:41:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 05:41:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 05:41:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 05:41:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 05:41:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 05:41:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-17 05:41:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.358338 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 05:41:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.358338 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 05:41:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.358338 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 05:41:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.358338 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 05:41:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.358338 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 05:41:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.358338 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 05:41:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.358338 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 05:41:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.358338 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 05:41:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.358338 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 05:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:41:05 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:41:05.00 2011-Dec-17 05:41:05 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324114865.00 Sat Dec 17 05:41:05 2011 2011-Dec-17 05:41:05 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-17 05:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:41:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:41:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 0.899 0.964 0.953 2011-Dec-17 05:41:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.966 1.079 1.116 0.953 2011-Dec-17 05:41:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.880 0.988 1.030 0.935 2011-Dec-17 05:41:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.927 0.014 1.010 0.014 2011-Dec-17 05:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:42:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:42:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 0.896 0.960 0.950 2011-Dec-17 05:42:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 1.081 1.121 0.954 2011-Dec-17 05:42:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.881 0.986 1.033 0.938 2011-Dec-17 05:42:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.014 1.013 0.014 2011-Dec-17 05:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:43:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:43:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 0.894 0.962 0.949 2011-Dec-17 05:43:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.967 1.079 1.117 0.953 2011-Dec-17 05:43:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.879 0.984 1.037 0.943 2011-Dec-17 05:43:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.014 1.012 0.014 2011-Dec-17 05:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 05:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 05:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-17 05:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-17 05:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-17 05:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:44:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:44:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.926 0.893 0.970 0.958 2011-Dec-17 05:44:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.982 1.080 1.122 0.955 2011-Dec-17 05:44:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.880 0.983 1.032 0.936 2011-Dec-17 05:44:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.014 1.012 0.014 2011-Dec-17 05:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:45:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:45:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 0.894 0.962 0.948 2011-Dec-17 05:45:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.970 1.079 1.118 0.952 2011-Dec-17 05:45:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.880 0.983 1.035 0.938 2011-Dec-17 05:45:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.014 1.012 0.014 2011-Dec-17 05:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:46:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:46:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 0.887 0.965 0.951 2011-Dec-17 05:46:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 1.077 1.117 0.952 2011-Dec-17 05:46:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.879 0.984 1.034 0.936 2011-Dec-17 05:46:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.014 1.012 0.014 2011-Dec-17 05:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:47:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:47:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 0.892 0.966 0.948 2011-Dec-17 05:47:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.978 1.077 1.118 0.952 2011-Dec-17 05:47:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.882 0.983 1.034 0.937 2011-Dec-17 05:47:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.014 1.016 0.014 2011-Dec-17 05:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:48:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:48:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 0.892 0.967 0.950 2011-Dec-17 05:48:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.940 1.078 1.120 0.954 2011-Dec-17 05:48:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.881 0.983 1.039 0.940 2011-Dec-17 05:48:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.938 0.014 1.021 0.014 2011-Dec-17 05:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:49:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:49:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 0.894 0.970 0.952 2011-Dec-17 05:49:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.973 1.080 1.120 0.954 2011-Dec-17 05:49:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.882 0.985 1.039 0.939 2011-Dec-17 05:49:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.014 1.017 0.014 2011-Dec-17 05:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:50:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:50:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 0.889 0.967 0.948 2011-Dec-17 05:50:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.962 1.081 1.118 0.952 2011-Dec-17 05:50:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.884 0.990 1.036 0.940 2011-Dec-17 05:50:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.934 0.014 1.018 0.014 2011-Dec-17 05:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:51:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:51:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 0.890 0.966 0.948 2011-Dec-17 05:51:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.973 1.080 1.117 0.950 2011-Dec-17 05:51:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.890 0.998 1.035 0.940 2011-Dec-17 05:51:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.934 0.014 1.017 0.014 2011-Dec-17 05:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 05:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-17 05:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-17 05:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 05:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-17 05:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 05:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 05:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 05:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 05:52:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:52:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 0.884 0.965 0.947 2011-Dec-17 05:52:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.968 1.077 1.120 0.951 2011-Dec-17 05:52:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.879 0.981 1.036 0.940 2011-Dec-17 05:52:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.014 1.015 0.014 2011-Dec-17 05:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 05:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:53:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:53:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 0.886 0.965 0.946 2011-Dec-17 05:53:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.965 1.075 1.118 0.949 2011-Dec-17 05:53:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.879 0.982 1.033 0.939 2011-Dec-17 05:53:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.934 0.014 1.017 0.014 2011-Dec-17 05:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:54:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:54:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 0.884 0.966 0.946 2011-Dec-17 05:54:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.961 1.077 1.117 0.950 2011-Dec-17 05:54:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.880 0.980 1.037 0.938 2011-Dec-17 05:54:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.014 1.016 0.014 2011-Dec-17 05:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:55:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:55:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 0.887 0.967 0.949 2011-Dec-17 05:55:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 1.077 1.115 0.948 2011-Dec-17 05:55:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.879 0.981 1.036 0.937 2011-Dec-17 05:55:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.014 1.017 0.014 2011-Dec-17 05:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 05:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:56:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:56:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 0.884 0.964 0.946 2011-Dec-17 05:56:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.933 1.078 1.117 0.948 2011-Dec-17 05:56:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.878 0.979 1.035 0.938 2011-Dec-17 05:56:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.014 1.015 0.014 2011-Dec-17 05:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:57:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:57:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 0.882 0.963 0.943 2011-Dec-17 05:57:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 1.073 1.117 0.947 2011-Dec-17 05:57:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.876 0.978 1.034 0.936 2011-Dec-17 05:57:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.014 1.014 0.014 2011-Dec-17 05:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:58:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:58:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 0.881 0.964 0.943 2011-Dec-17 05:58:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.987 1.071 1.113 0.946 2011-Dec-17 05:58:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.876 0.982 1.033 0.938 2011-Dec-17 05:58:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.014 1.014 0.014 2011-Dec-17 05:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 05:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 05:59:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 05:59:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 0.881 0.963 0.943 2011-Dec-17 05:59:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 1.072 1.116 0.949 2011-Dec-17 05:59:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.876 0.980 1.038 0.941 2011-Dec-17 05:59:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.014 1.014 0.014 2011-Dec-17 05:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 05:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 05:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-17 05:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 05:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 06:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 06:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 06:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-17 06:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 06:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-17 06:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-17 06:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-17 06:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 06:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 06:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 06:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-17 06:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-17 06:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-17 06:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-17 06:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-17 06:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-17 06:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-17 06:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-17 06:00:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 06:00:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 0.884 0.965 0.946 2011-Dec-17 06:00:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 1.073 1.129 0.957 2011-Dec-17 06:00:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.886 0.998 1.043 0.946 2011-Dec-17 06:00:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.014 1.016 0.014 2011-Dec-17 06:00:38 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 06:00:38.301 (seconds: 21638.301)!} 2011-Dec-17 06:00:38 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 06:00:38.301 (seconds: 21638.301)! 2011-Dec-17 06:00:39 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 21637.0 to 21638.0! 2011-Dec-17 06:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 06:00:40 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (21637.0 - 21639.0)! 2011-Dec-17 06:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 06:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-17 06:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-17 06:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-17 06:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 06:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 06:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-17 06:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 06:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 06:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-17 06:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-17 06:01:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 06:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 06:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 06:01:06 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-17 06:01:06 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-17 06:01:06 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-17 06:01:06 LOG5 end_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2011-Dec-17 06:01:06 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-17 06:01:06 LOG5 end_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2011-Dec-17 06:01:06 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-17 06:01:06 LOG5 finish_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2011-Dec-17 06:01:06 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-17 06:01:06 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-17 06:01:06 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-17 06:01:06 LOG5 end_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2011-Dec-17 06:01:06 COMMAND run_command_line: EXECUTING command 48: 'ENDIF' 2011-Dec-17 06:01:06 COMMAND run_command_line: EXECUTING command 55: 'LOAD togs_cima31.conf' 2011-Dec-17 06:01:06 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2011-Dec-17 06:01:06 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-17 06:01:06 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2011-Dec-17 06:01:06 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima31.conf' 2011-Dec-17 06:01:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2011-Dec-17 06:01:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2011-Dec-17 06:01:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2011-Dec-17 06:01:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2011-Dec-17 06:01:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2011-Dec-17 06:01:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2011-Dec-17 06:01:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2011-Dec-17 06:01:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2011-Dec-17 06:01:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2011-Dec-17 06:01:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2011-Dec-17 06:01:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2011-Dec-17 06:01:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2011-Dec-17 06:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2011-Dec-17 06:01:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2011-Dec-17 06:01:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-17 06:01:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-17 06:01:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-17 06:01:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-17 06:01:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2011-Dec-17 06:01:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2011-Dec-17 06:01:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2011-Dec-17 06:01:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2011-Dec-17 06:01:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2011-Dec-17 06:01:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2011-Dec-17 06:01:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2011-Dec-17 06:01:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2011-Dec-17 06:01:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-17 06:01:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-17 06:01:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-17 06:01:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-17 06:01:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2011-Dec-17 06:01:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2011-Dec-17 06:01:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2011-Dec-17 06:01:08 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-17 06:01:08 BEGIN begin_task: Starting task 'configuring IF/LO path' 2011-Dec-17 06:01:08 LOG5 begin_task: Level: (2) ID = <10279> Status = 0 0 0 0 ok 2011-Dec-17 06:01:08 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2011-Dec-17 06:01:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2011-Dec-17 06:01:08 LOG1 config_iflo: Receiver ALFA already selected 2011-Dec-17 06:01:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-17 06:01:08 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-17 06:01:08 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-17 06:01:08 LOG5 begin_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2011-Dec-17 06:01:08 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-17 06:01:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-17 06:01:08 LOG5 end_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2011-Dec-17 06:01:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-17 06:01:08 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-17 06:01:08 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2011-Dec-17 06:01:08 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2011-Dec-17 06:01:08 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2011-Dec-17 06:01:08 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2011-Dec-17 06:01:08 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2011-Dec-17 06:01:08 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2011-Dec-17 06:01:08 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2011-Dec-17 06:01:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2011-Dec-17 06:01:08 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2011-Dec-17 06:01:08 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2011-Dec-17 06:01:08 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2011-Dec-17 06:01:08 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2011-Dec-17 06:01:08 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2011-Dec-17 06:01:08 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2011-Dec-17 06:01:08 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2011-Dec-17 06:01:08 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2011-Dec-17 06:01:08 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2011-Dec-17 06:01:08 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2011-Dec-17 06:01:08 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2011-Dec-17 06:01:08 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2011-Dec-17 06:01:08 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2011-Dec-17 06:01:08 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2011-Dec-17 06:01:08 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2011-Dec-17 06:01:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:01:08 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2011-Dec-17 06:01:08 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2011-Dec-17 06:01:08 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2011-Dec-17 06:01:08 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2011-Dec-17 06:01:08 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2011-Dec-17 06:01:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2011-Dec-17 06:01:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 06:01:08 START begin_task: Starting task 'waiting on configuring IF/LO path' 2011-Dec-17 06:01:08 LOG5 begin_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2011-Dec-17 06:01:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2011-Dec-17 06:01:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2011-Dec-17 06:01:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:01:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 06:01:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:01:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:01:09 LOG4 got_cormsg: From DATATAKING: vw% DONE 2011-Dec-17 06:01:09 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2011-Dec-17 06:01:09 LOG5 end_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2011-Dec-17 06:01:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2011-Dec-17 06:01:09 STOP finish_task: Finishing task 'configuring IF/LO path' 2011-Dec-17 06:01:09 LOG5 finish_task: Level: (2) ID = <10279> Status = 0 0 0 0 ok 2011-Dec-17 06:01:09 DONE finish_task: DONE finished configuration: IF/LO path 2011-Dec-17 06:01:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-17 06:01:09 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2011-Dec-17 06:01:09 LOG5 end_task: Level: (2) ID = <10279> Status = 0 0 0 0 ok 2011-Dec-17 06:01:09 BEGIN begin_task: Starting task 'configuring WAPPs' 2011-Dec-17 06:01:09 LOG5 begin_task: Level: (2) ID = <10282> Status = 0 0 0 0 ok 2011-Dec-17 06:01:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2011-Dec-17 06:01:09 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2011-Dec-17 06:01:09 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Dec-17 06:01:09 START begin_task: Starting task 'selecting calibration port' 2011-Dec-17 06:01:09 LOG5 begin_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2011-Dec-17 06:01:09 LOG3 vw_send: To DATATAKING: calport 3 2011-Dec-17 06:01:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Dec-17 06:01:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 06:01:10 START begin_task: Starting task 'waiting on calport' 2011-Dec-17 06:01:10 LOG5 begin_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2011-Dec-17 06:01:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:01:10 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Dec-17 06:01:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 06:01:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:01:10 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-17 06:01:10 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Dec-17 06:01:10 LOG5 end_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2011-Dec-17 06:01:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Dec-17 06:01:10 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Dec-17 06:01:10 LOG5 end_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2011-Dec-17 06:01:10 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-17 06:01:10 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-17 06:01:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-17 06:01:10 LOG5 begin_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2011-Dec-17 06:01:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:01:10 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-17 06:01:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-17 06:01:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-17 06:01:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-17 06:01:10 LOG5 end_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2011-Dec-17 06:01:10 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2011-Dec-17 06:01:10 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2011-Dec-17 06:01:10 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2011-Dec-17 06:01:10 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2011-Dec-17 06:01:10 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2011-Dec-17 06:01:10 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2011-Dec-17 06:01:10 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2011-Dec-17 06:01:10 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2011-Dec-17 06:01:10 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel Cabrera 2011-Dec-17 06:01:10 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel Cabrera 2011-Dec-17 06:01:10 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel Cabrera 2011-Dec-17 06:01:10 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel Cabrera 2011-Dec-17 06:01:10 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Dec-17 06:01:10 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Dec-17 06:01:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-17 06:01:10 LOG5 begin_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2011-Dec-17 06:01:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2011-Dec-17 06:01:10 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-17 06:01:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2011-Dec-17 06:01:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-17 06:01:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2011-Dec-17 06:01:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-17 06:01:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-17 06:01:10 LOG5 end_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2011-Dec-17 06:01:10 LOG3 sock_errsend: To WAPPDATA: FLUSH 2011-Dec-17 06:01:10 STOP finish_task: Finishing task 'configuring WAPPs' 2011-Dec-17 06:01:10 LOG5 finish_task: Level: (2) ID = <10282> Status = 0 0 0 0 ok 2011-Dec-17 06:01:10 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2011-Dec-17 06:01:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-17 06:01:10 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2011-Dec-17 06:01:10 LOG5 end_task: Level: (2) ID = <10282> Status = 0 0 0 0 ok 2011-Dec-17 06:01:10 COMMAND run_command_line: EXECUTING command 56: 'TRACKCURPOS' 2011-Dec-17 06:01:10 BEGIN begin_task: Starting task 'tracking current position' 2011-Dec-17 06:01:11 LOG5 begin_task: Level: (2) ID = <10287> Status = 0 0 0 0 ok 2011-Dec-17 06:01:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2011-Dec-17 06:01:11 INFO1 track_current_pos: Starting to track the current commanded position RA = 10:13:14.1 and Dec = +23:27:40.8 2011-Dec-17 06:01:11 LOG3 track_source: Calling 'track_source Cur-pos 101314.1 232740.8 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2011-Dec-17 06:01:11 START begin_task: Starting task 'sending tracking commands' 2011-Dec-17 06:01:11 LOG5 begin_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2011-Dec-17 06:01:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2011-Dec-17 06:01:11 INFO1 track_source: Starting to track Cur-pos 2011-Dec-17 06:01:11 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2011-Dec-17 06:01:11 LOG3 vw_send: To DATATAKING: set ra 101314.1 2011-Dec-17 06:01:11 LOG3 vw_send: To DATATAKING: set dec 232740.8 2011-Dec-17 06:01:11 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-17 06:01:11 LOG3 vw_send: To DATATAKING: pnt tr 101314.1 232740.8 -CJ 2011-Dec-17 06:01:11 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2011-Dec-17 06:01:11 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-17 06:01:11 LOG5 finish_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2011-Dec-17 06:01:11 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-17 06:01:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 06:01:11 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-17 06:01:11 LOG5 end_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2011-Dec-17 06:01:11 START begin_task: Starting task 'waiting on telescope' 2011-Dec-17 06:01:11 LOG5 begin_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2011-Dec-17 06:01:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-17 06:01:11 LOG3 waittrk: Start waittrk 5 2011-Dec-17 06:01:11 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-17 06:01:11 LOG5 begin_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2011-Dec-17 06:01:11 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2011-Dec-17 06:01:11 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2011-Dec-17 06:01:11 LOG4 got_cormsg: From DATATAKING: set ra 101314.1 2011-Dec-17 06:01:11 LOG4 got_cormsg: From DATATAKING: set dec 232740.8 2011-Dec-17 06:01:11 LOG4 got_cormsg: From DATATAKING: vw% 101314.1 2011-Dec-17 06:01:11 LOG4 got_cormsg: From DATATAKING: vw% 232740.8 2011-Dec-17 06:01:11 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:01:11 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-17 06:01:11 LOG4 got_cormsg: From DATATAKING: pnt tr 101314.1 232740.8 -CJ 2011-Dec-17 06:01:11 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2011-Dec-17 06:01:11 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-17 06:01:11 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:01:16 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-17 06:01:16 LOG5 end_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2011-Dec-17 06:01:16 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-17 06:01:16 LOG5 begin_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2011-Dec-17 06:01:20 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-17 06:01:20 LOG5 end_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2011-Dec-17 06:01:20 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-17 06:01:20 INFO2 waittrk: Now tracking Cur-pos 2011-Dec-17 06:01:20 LOG4 waittrk: Current telescope position: Az = 111.33 ZA = 15.59 2011-Dec-17 06:01:20 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-17 06:01:20 LOG5 finish_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2011-Dec-17 06:01:20 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-17 06:01:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 06:01:20 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-17 06:01:20 LOG5 end_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2011-Dec-17 06:01:20 STOP finish_task: Finishing task 'tracking current position' 2011-Dec-17 06:01:20 LOG5 finish_task: Level: (2) ID = <10287> Status = 0 0 0 0 ok 2011-Dec-17 06:01:20 DONE finish_task: DONE finished tracking: current position 2011-Dec-17 06:01:20 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-17 06:01:20 END end_task: Finishing task 'tracking current position' with status 'OK' 2011-Dec-17 06:01:20 LOG5 end_task: Level: (2) ID = <10287> Status = 0 0 0 0 ok 2011-Dec-17 06:01:20 COMMAND run_command_line: EXECUTING command 57: 'ALFAANGLE 19' 2011-Dec-17 06:01:20 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2011-Dec-17 06:01:20 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2011-Dec-17 06:01:20 LOG5 begin_task: Level: (2) ID = <10292> Status = 0 0 0 0 ok 2011-Dec-17 06:01:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2011-Dec-17 06:01:20 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2011-Dec-17 06:01:20 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2011-Dec-17 06:01:21 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-17 06:01:21 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-17 06:01:21 LOG5 begin_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2011-Dec-17 06:02:21 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-17 06:02:21 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2011-Dec-17 06:02:21 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-17 06:02:21 LOG5 end_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2011-Dec-17 06:02:21 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-17 06:02:21 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2011-Dec-17 06:02:21 LOG5 finish_task: Level: (2) ID = <10292> Status = 0 0 0 0 ok 2011-Dec-17 06:02:21 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2011-Dec-17 06:02:21 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-17 06:02:21 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2011-Dec-17 06:02:21 LOG5 end_task: Level: (2) ID = <10292> Status = 0 0 0 0 ok 2011-Dec-17 06:02:21 COMMAND run_command_line: EXECUTING command 61: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2011-Dec-17 06:02:22 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2011-Dec-17 06:02:22 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-17 06:02:22 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2011-Dec-17 06:02:22 BEGIN begin_task: Starting task 'smart frequency switching' 2011-Dec-17 06:02:22 LOG5 begin_task: Level: (2) ID = <10294> Status = 0 0 0 0 ok 2011-Dec-17 06:02:22 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2011-Dec-17 06:02:22 INFO1 smartfreq: Starting pattern: Smart frequency switching 2011-Dec-17 06:02:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2011-Dec-17 06:02:22 START begin_task: Starting task 'selecting calibration type' 2011-Dec-17 06:02:22 LOG5 begin_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2011-Dec-17 06:02:22 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-17 06:02:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-17 06:02:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 06:02:22 START begin_task: Starting task 'waiting on setcal' 2011-Dec-17 06:02:22 LOG5 begin_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2011-Dec-17 06:02:22 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-17 06:02:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 06:02:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:02:22 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-17 06:02:22 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-17 06:02:22 LOG5 end_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2011-Dec-17 06:02:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-17 06:02:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-17 06:02:22 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-17 06:02:22 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-17 06:02:22 LOG5 begin_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2011-Dec-17 06:02:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:02:22 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-17 06:02:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-17 06:02:22 LOG5 end_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2011-Dec-17 06:02:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-17 06:02:22 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-17 06:02:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-17 06:02:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-17 06:02:22 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-17 06:02:22 LOG5 begin_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2011-Dec-17 06:02:22 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-17 06:02:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-17 06:02:22 LOG5 end_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2011-Dec-17 06:02:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-17 06:02:22 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-17 06:02:22 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-17 06:02:22 LOG5 end_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2011-Dec-17 06:02:22 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel Cabrera 2011-Dec-17 06:02:22 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel Cabrera 2011-Dec-17 06:02:22 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel Cabrera 2011-Dec-17 06:02:22 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel Cabrera 2011-Dec-17 06:02:22 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2011-Dec-17 06:02:23 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-17 06:02:23 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2011-Dec-17 06:02:23 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-17 06:02:23 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-17 06:02:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-17 06:02:23 LOG5 begin_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2011-Dec-17 06:02:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2011-Dec-17 06:02:23 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-17 06:02:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-17 06:02:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-17 06:02:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-17 06:02:23 LOG5 end_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2011-Dec-17 06:02:23 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2011-Dec-17 06:02:23 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-17 06:02:23 LOG5 begin_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2011-Dec-17 06:02:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2011-Dec-17 06:02:23 INFO2 adjust_power: Starting to adjust WAPP power 2011-Dec-17 06:02:23 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-17 06:02:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-17 06:02:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 06:02:23 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-17 06:02:23 LOG5 begin_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2011-Dec-17 06:02:23 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-17 06:02:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-17 06:02:23 NOTE WAPPDATA-new_file: New FITS file: wapp.20111217.a2048.0006.fits 2011-Dec-17 06:02:23 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111217.a2048.0006.fits} 2011-Dec-17 06:02:26 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:02:26 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-17 06:02:26 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-17 06:02:26 LOG5 end_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2011-Dec-17 06:02:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-17 06:02:26 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-17 06:02:26 LOG5 begin_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2011-Dec-17 06:02:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-17 06:02:26 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-17 06:02:26 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-17 06:02:26 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-17 06:02:26 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-17 06:02:26 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-17 06:02:26 LOG5 begin_task: Level: (5) ID = <10303> Status = 0 0 0 0 ok 2011-Dec-17 06:02:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-17 06:02:26 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:02:27 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 8 6 dB 2011-Dec-17 06:02:27 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 3 3 dB 2011-Dec-17 06:02:27 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 3 dB 2011-Dec-17 06:02:27 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2011-Dec-17 06:02:27 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-17 06:02:27 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-17 06:02:27 LOG5 end_task: Level: (5) ID = <10303> Status = 0 0 0 0 ok 2011-Dec-17 06:02:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.921 0.903 ALFA beam 1: 0.978 1.029 2011-Dec-17 06:02:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.946 1.084 ALFA beam 3: 0.900 0.967 2011-Dec-17 06:02:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.885 0.981 ALFA beam 5: 0.986 1.128 2011-Dec-17 06:02:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.932 0.014 ALFA beam 7: 1.017 0.014 2011-Dec-17 06:02:27 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-17 06:02:27 LOG5 finish_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2011-Dec-17 06:02:27 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-17 06:02:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 06:02:27 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-17 06:02:27 LOG5 end_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2011-Dec-17 06:02:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-17 06:02:27 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-17 06:02:27 LOG5 finish_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2011-Dec-17 06:02:27 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2011-Dec-17 06:02:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-17 06:02:27 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-17 06:02:27 LOG5 end_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2011-Dec-17 06:02:27 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2011-Dec-17 06:02:27 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-17 06:02:27 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2011-Dec-17 06:02:27 LOG5 antvel: Calling 'antvel 101314.100000 232740.800000 J Topocentric 0' 2011-Dec-17 06:02:27 LOG2 antvel: Precessing RA = 10:13:14.1 Dec = +23:27:40.8 Epoch = 2011.96167 J 2011-Dec-17 06:02:27 LOG2 antvel: Computed apparent RA = 10:13:55.6 Dec = +23:23:52.2 2011-Dec-17 06:02:27 LOG2 antvel: Parameters to Doppler: Topocentric 36146 2011 351 0.0 2011-Dec-17 06:02:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-17 06:02:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2011-Dec-17 06:02:27 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2011-Dec-17 06:02:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-17 06:02:27 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-17 06:02:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-17 06:02:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:02:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2011-Dec-17 06:02:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-17 06:02:27 LOG5 begin_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2011-Dec-17 06:02:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-17 06:02:27 LOG5 log_alfabeam: Parameters: 10.220583333333336 23.461333333333329 11.302782 2011.9616747154409 18.999933 2011-Dec-17 06:02:27 LOG4 log_alfabeam: ALFABEAM 0 10.220583333333336 23.461333333333332 2011-Dec-17 06:02:27 LOG4 log_alfabeam: ALFABEAM 1 10.228252008085427 23.449909008950417 2011-Dec-17 06:02:27 LOG4 log_alfabeam: ALFABEAM 2 10.224713535808945 23.535031511066009 2011-Dec-17 06:02:27 LOG4 log_alfabeam: ALFABEAM 3 10.217041685302533 23.546792721192137 2011-Dec-17 06:02:27 LOG4 log_alfabeam: ALFABEAM 4 10.212910277924102 23.472451579387638 2011-Dec-17 06:02:27 LOG4 log_alfabeam: ALFABEAM 5 10.216482740585031 23.387131470340375 2011-Dec-17 06:02:27 LOG4 log_alfabeam: ALFABEAM 6 10.224152491172408 23.376349997665361 2011-Dec-17 06:02:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135100019 2011-Dec-17 06:02:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-17 06:02:28 LOG5 begin_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2011-Dec-17 06:02:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 06:02:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-17 06:02:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:02:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:02:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:02:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-17 06:02:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36149.00 2011-Dec-17 06:02:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 06:02:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:02:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:02:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 06:02:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:02:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:02:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:02:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 06:02:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 06:02:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 06:02:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 0.903 0.978 1.029 2011-Dec-17 06:02:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 1.084 0.900 0.967 2011-Dec-17 06:02:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.885 0.981 0.986 1.128 2011-Dec-17 06:02:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.908 0.014 0.992 0.014 2011-Dec-17 06:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.163 (still bad) 2011-Dec-17 06:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.161 (still bad) 2011-Dec-17 06:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.162 (still bad) 2011-Dec-17 06:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.169 (still bad) 2011-Dec-17 06:02:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 06:02:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-17 06:02:39 LOG5 end_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2011-Dec-17 06:02:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-17 06:02:39 LOG5 end_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2011-Dec-17 06:02:39 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2011-Dec-17 06:02:39 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-17 06:02:39 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2011-Dec-17 06:02:39 LOG5 antvel: Calling 'antvel 101314.100000 232740.800000 J Topocentric 0' 2011-Dec-17 06:02:39 LOG2 antvel: Precessing RA = 10:13:14.1 Dec = +23:27:40.8 Epoch = 2011.96168 J 2011-Dec-17 06:02:39 LOG2 antvel: Computed apparent RA = 10:13:55.6 Dec = +23:23:52.2 2011-Dec-17 06:02:39 LOG2 antvel: Parameters to Doppler: Topocentric 36159 2011 351 0.0 2011-Dec-17 06:02:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-17 06:02:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2011-Dec-17 06:02:39 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2011-Dec-17 06:02:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-17 06:02:39 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-17 06:02:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-17 06:02:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:02:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2011-Dec-17 06:02:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-17 06:02:39 LOG5 begin_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2011-Dec-17 06:02:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-17 06:02:39 LOG5 log_alfabeam: Parameters: 10.220583333333336 23.461333333333329 11.306403 2011.9616751273861 18.999933 2011-Dec-17 06:02:39 LOG4 log_alfabeam: ALFABEAM 0 10.220583333333341 23.461333333333336 2011-Dec-17 06:02:39 LOG4 log_alfabeam: ALFABEAM 1 10.228253005759621 23.450035787895747 2011-Dec-17 06:02:39 LOG4 log_alfabeam: ALFABEAM 2 10.224707074009826 23.535100309074902 2011-Dec-17 06:02:39 LOG4 log_alfabeam: ALFABEAM 3 10.217034191769383 23.546733490133715 2011-Dec-17 06:02:39 LOG4 log_alfabeam: ALFABEAM 4 10.212909323804755 23.472325434767910 2011-Dec-17 06:02:39 LOG4 log_alfabeam: ALFABEAM 5 10.216489161351499 23.387064686373868 2011-Dec-17 06:02:39 LOG4 log_alfabeam: ALFABEAM 6 10.224159833139145 23.376408106103607 2011-Dec-17 06:02:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135100020 2011-Dec-17 06:02:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-17 06:02:40 LOG5 begin_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2011-Dec-17 06:02:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 06:02:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-17 06:02:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:02:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:02:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.162 (still bad) 2011-Dec-17 06:02:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-17 06:02:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36161.00 2011-Dec-17 06:02:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 06:02:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:02:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:02:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 06:02:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:02:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:02:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:02:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 06:02:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 06:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.196 (still bad) 2011-Dec-17 06:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.195 (still bad) 2011-Dec-17 06:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.195 (still bad) 2011-Dec-17 06:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.197 (still bad) 2011-Dec-17 06:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.196 (still bad) 2011-Dec-17 06:02:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 06:02:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-17 06:02:51 LOG5 end_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2011-Dec-17 06:02:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-17 06:02:51 LOG5 end_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2011-Dec-17 06:02:51 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2011-Dec-17 06:02:51 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-17 06:02:51 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2011-Dec-17 06:02:51 LOG5 antvel: Calling 'antvel 101314.100000 232740.800000 J Topocentric 0' 2011-Dec-17 06:02:51 LOG2 antvel: Precessing RA = 10:13:14.1 Dec = +23:27:40.8 Epoch = 2011.96168 J 2011-Dec-17 06:02:51 LOG2 antvel: Computed apparent RA = 10:13:55.6 Dec = +23:23:52.2 2011-Dec-17 06:02:51 LOG2 antvel: Parameters to Doppler: Topocentric 36171 2011 351 0.0 2011-Dec-17 06:02:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-17 06:02:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2011-Dec-17 06:02:51 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2011-Dec-17 06:02:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-17 06:02:51 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-17 06:02:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-17 06:02:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:02:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2011-Dec-17 06:02:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-17 06:02:51 LOG5 begin_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2011-Dec-17 06:02:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-17 06:02:51 LOG5 log_alfabeam: Parameters: 10.220583333333336 23.461333333333329 11.309745 2011.9616755076433 18.999933 2011-Dec-17 06:02:51 LOG4 log_alfabeam: ALFABEAM 0 10.220583333333336 23.461333333333350 2011-Dec-17 06:02:51 LOG4 log_alfabeam: ALFABEAM 1 10.228253912279738 23.450152236957358 2011-Dec-17 06:02:51 LOG4 log_alfabeam: ALFABEAM 2 10.224701134119989 23.535163398916758 2011-Dec-17 06:02:51 LOG4 log_alfabeam: ALFABEAM 3 10.217027314290736 23.546678982657706 2011-Dec-17 06:02:51 LOG4 log_alfabeam: ALFABEAM 4 10.212908457184080 23.472209568778027 2011-Dec-17 06:02:51 LOG4 log_alfabeam: ALFABEAM 5 10.216495063298309 23.387003443903396 2011-Dec-17 06:02:51 LOG4 log_alfabeam: ALFABEAM 6 10.224166571681673 23.376461579478722 2011-Dec-17 06:02:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135100021 2011-Dec-17 06:02:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-17 06:02:52 LOG5 begin_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2011-Dec-17 06:02:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 06:02:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-17 06:02:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:02:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:02:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:02:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-17 06:02:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36173.00 2011-Dec-17 06:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.195 (still bad) 2011-Dec-17 06:02:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 06:02:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:02:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:02:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 06:02:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:02:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:02:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:02:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 06:02:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 06:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.195 (still bad) 2011-Dec-17 06:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.194 (still bad) 2011-Dec-17 06:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.196 (still bad) 2011-Dec-17 06:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.199 (still bad) 2011-Dec-17 06:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.197 (still bad) 2011-Dec-17 06:03:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 06:03:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-17 06:03:03 LOG5 end_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2011-Dec-17 06:03:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-17 06:03:03 LOG5 end_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2011-Dec-17 06:03:03 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2011-Dec-17 06:03:03 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-17 06:03:03 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2011-Dec-17 06:03:03 LOG5 antvel: Calling 'antvel 101314.100000 232740.800000 J Topocentric 0' 2011-Dec-17 06:03:03 LOG2 antvel: Precessing RA = 10:13:14.1 Dec = +23:27:40.8 Epoch = 2011.96168 J 2011-Dec-17 06:03:03 LOG2 antvel: Computed apparent RA = 10:13:55.6 Dec = +23:23:52.2 2011-Dec-17 06:03:03 LOG2 antvel: Parameters to Doppler: Topocentric 36183 2011 351 0.0 2011-Dec-17 06:03:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-17 06:03:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2011-Dec-17 06:03:03 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2011-Dec-17 06:03:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-17 06:03:03 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-17 06:03:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-17 06:03:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:03:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2011-Dec-17 06:03:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-17 06:03:03 LOG5 begin_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2011-Dec-17 06:03:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-17 06:03:03 LOG5 log_alfabeam: Parameters: 10.220583333333336 23.461333333333329 11.313088 2011.9616758879004 18.999933 2011-Dec-17 06:03:03 LOG4 log_alfabeam: ALFABEAM 0 10.220583333333339 23.461333333333350 2011-Dec-17 06:03:03 LOG4 log_alfabeam: ALFABEAM 1 10.228254805525280 23.450268185861496 2011-Dec-17 06:03:03 LOG4 log_alfabeam: ALFABEAM 2 10.224695215372900 23.535226120260365 2011-Dec-17 06:03:03 LOG4 log_alfabeam: ALFABEAM 3 10.217020471568182 23.546624611788950 2011-Dec-17 06:03:03 LOG4 log_alfabeam: ALFABEAM 4 10.212907603565196 23.472094200845042 2011-Dec-17 06:03:03 LOG4 log_alfabeam: ALFABEAM 5 10.216500944024888 23.386942559543293 2011-Dec-17 06:03:03 LOG4 log_alfabeam: ALFABEAM 6 10.224173276332559 23.376514917896035 2011-Dec-17 06:03:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135100022 2011-Dec-17 06:03:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-17 06:03:04 LOG5 begin_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2011-Dec-17 06:03:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 06:03:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-17 06:03:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:03:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:03:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:03:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-17 06:03:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36185.00 2011-Dec-17 06:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.197 (still bad) 2011-Dec-17 06:03:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 06:03:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:03:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:03:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 06:03:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:03:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:03:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:03:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 06:03:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 06:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.185 (still bad) 2011-Dec-17 06:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.183 (still bad) 2011-Dec-17 06:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.187 (still bad) 2011-Dec-17 06:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.189 (still bad) 2011-Dec-17 06:03:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 06:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.186 (still bad) 2011-Dec-17 06:03:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-17 06:03:15 LOG5 end_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2011-Dec-17 06:03:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-17 06:03:15 LOG5 end_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2011-Dec-17 06:03:15 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2011-Dec-17 06:03:15 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-17 06:03:15 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2011-Dec-17 06:03:15 LOG5 antvel: Calling 'antvel 101314.100000 232740.800000 J Topocentric 0' 2011-Dec-17 06:03:15 LOG2 antvel: Precessing RA = 10:13:14.1 Dec = +23:27:40.8 Epoch = 2011.96168 J 2011-Dec-17 06:03:15 LOG2 antvel: Computed apparent RA = 10:13:55.6 Dec = +23:23:52.2 2011-Dec-17 06:03:15 LOG2 antvel: Parameters to Doppler: Topocentric 36195 2011 351 0.0 2011-Dec-17 06:03:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-17 06:03:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2011-Dec-17 06:03:15 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2011-Dec-17 06:03:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-17 06:03:15 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-17 06:03:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-17 06:03:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:03:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2011-Dec-17 06:03:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-17 06:03:15 LOG5 begin_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2011-Dec-17 06:03:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-17 06:03:15 LOG5 log_alfabeam: Parameters: 10.220583333333336 23.461333333333329 11.316430 2011.9616762681574 18.999933 2011-Dec-17 06:03:15 LOG4 log_alfabeam: ALFABEAM 0 10.220583333333341 23.461333333333325 2011-Dec-17 06:03:15 LOG4 log_alfabeam: ALFABEAM 1 10.228255685125538 23.450383569324043 2011-Dec-17 06:03:15 LOG4 log_alfabeam: ALFABEAM 2 10.224689321162888 23.535288439161807 2011-Dec-17 06:03:15 LOG4 log_alfabeam: ALFABEAM 3 10.217013667381083 23.546570409520768 2011-Dec-17 06:03:15 LOG4 log_alfabeam: ALFABEAM 4 10.212906763297871 23.471979395914797 2011-Dec-17 06:03:15 LOG4 log_alfabeam: ALFABEAM 5 10.216506800162444 23.386882066227191 2011-Dec-17 06:03:15 LOG4 log_alfabeam: ALFABEAM 6 10.224179943387053 23.376568089996962 2011-Dec-17 06:03:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135100023 2011-Dec-17 06:03:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-17 06:03:16 LOG5 begin_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2011-Dec-17 06:03:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 06:03:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-17 06:03:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:03:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:03:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:03:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-17 06:03:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36197.00 2011-Dec-17 06:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.186 (still bad) 2011-Dec-17 06:03:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 06:03:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:03:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:03:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 06:03:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:03:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:03:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:03:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 06:03:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 06:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.163 (still bad) 2011-Dec-17 06:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.162 (still bad) 2011-Dec-17 06:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.163 (still bad) 2011-Dec-17 06:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.165 (still bad) 2011-Dec-17 06:03:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 06:03:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-17 06:03:27 LOG5 end_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2011-Dec-17 06:03:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-17 06:03:27 LOG5 end_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2011-Dec-17 06:03:27 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2011-Dec-17 06:03:27 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-17 06:03:27 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2011-Dec-17 06:03:27 LOG5 antvel: Calling 'antvel 101314.100000 232740.800000 J Topocentric 0' 2011-Dec-17 06:03:27 LOG2 antvel: Precessing RA = 10:13:14.1 Dec = +23:27:40.8 Epoch = 2011.96168 J 2011-Dec-17 06:03:27 LOG2 antvel: Computed apparent RA = 10:13:55.6 Dec = +23:23:52.2 2011-Dec-17 06:03:27 LOG2 antvel: Parameters to Doppler: Topocentric 36207 2011 351 0.0 2011-Dec-17 06:03:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-17 06:03:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2011-Dec-17 06:03:27 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2011-Dec-17 06:03:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-17 06:03:27 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-17 06:03:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-17 06:03:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:03:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2011-Dec-17 06:03:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-17 06:03:27 LOG5 begin_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2011-Dec-17 06:03:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-17 06:03:27 LOG5 log_alfabeam: Parameters: 10.220583333333336 23.461333333333329 11.319773 2011.9616766484144 18.999933 2011-Dec-17 06:03:27 LOG4 log_alfabeam: ALFABEAM 0 10.220583333333339 23.461333333333332 2011-Dec-17 06:03:27 LOG4 log_alfabeam: ALFABEAM 1 10.228256551768347 23.450498460442994 2011-Dec-17 06:03:27 LOG4 log_alfabeam: ALFABEAM 2 10.224683447816915 23.535350396455392 2011-Dec-17 06:03:27 LOG4 log_alfabeam: ALFABEAM 3 10.217006897346399 23.546516342877936 2011-Dec-17 06:03:27 LOG4 log_alfabeam: ALFABEAM 4 10.212905935720544 23.471865081244768 2011-Dec-17 06:03:27 LOG4 log_alfabeam: ALFABEAM 5 10.216512635363999 23.386821924301145 2011-Dec-17 06:03:27 LOG4 log_alfabeam: ALFABEAM 6 10.224186577138251 23.376621128156735 2011-Dec-17 06:03:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135100024 2011-Dec-17 06:03:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-17 06:03:28 LOG5 begin_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2011-Dec-17 06:03:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 06:03:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-17 06:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.164 (still bad) 2011-Dec-17 06:03:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:03:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:03:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:03:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-17 06:03:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36209.00 2011-Dec-17 06:03:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 06:03:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:03:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:03:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 06:03:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:03:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:03:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:03:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 06:03:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 06:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.164 (still bad) 2011-Dec-17 06:03:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-17 06:03:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 0.915 0.984 1.040 2011-Dec-17 06:03:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.956 1.092 0.914 0.978 2011-Dec-17 06:03:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.892 0.990 0.997 1.159 2011-Dec-17 06:03:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.936 0.014 1.020 0.022 2011-Dec-17 06:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.159 (still bad) 2011-Dec-17 06:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.158 (still bad) 2011-Dec-17 06:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.162 (still bad) 2011-Dec-17 06:03:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 06:03:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-17 06:03:39 LOG5 end_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2011-Dec-17 06:03:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-17 06:03:39 LOG5 end_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2011-Dec-17 06:03:39 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2011-Dec-17 06:03:39 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-17 06:03:39 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2011-Dec-17 06:03:39 LOG5 antvel: Calling 'antvel 101314.100000 232740.800000 J Topocentric 0' 2011-Dec-17 06:03:39 LOG2 antvel: Precessing RA = 10:13:14.1 Dec = +23:27:40.8 Epoch = 2011.96168 J 2011-Dec-17 06:03:39 LOG2 antvel: Computed apparent RA = 10:13:55.6 Dec = +23:23:52.2 2011-Dec-17 06:03:39 LOG2 antvel: Parameters to Doppler: Topocentric 36219 2011 351 0.0 2011-Dec-17 06:03:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-17 06:03:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2011-Dec-17 06:03:39 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2011-Dec-17 06:03:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-17 06:03:39 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-17 06:03:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-17 06:03:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:03:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2011-Dec-17 06:03:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-17 06:03:39 LOG5 begin_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2011-Dec-17 06:03:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-17 06:03:39 LOG5 log_alfabeam: Parameters: 10.220583333333336 23.461333333333329 11.323115 2011.9616770286714 18.999933 2011-Dec-17 06:03:39 LOG4 log_alfabeam: ALFABEAM 0 10.220583333333336 23.461333333333325 2011-Dec-17 06:03:39 LOG4 log_alfabeam: ALFABEAM 1 10.228257405094318 23.450612794490997 2011-Dec-17 06:03:39 LOG4 log_alfabeam: ALFABEAM 2 10.224677598704153 23.535411958571711 2011-Dec-17 06:03:39 LOG4 log_alfabeam: ALFABEAM 3 10.217000165206706 23.546462443665625 2011-Dec-17 06:03:39 LOG4 log_alfabeam: ALFABEAM 4 10.212905121171932 23.471751321226741 2011-Dec-17 06:03:39 LOG4 log_alfabeam: ALFABEAM 5 10.216518446285889 23.386762166335529 2011-Dec-17 06:03:39 LOG4 log_alfabeam: ALFABEAM 6 10.224193173917293 23.376674001201458 2011-Dec-17 06:03:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135100025 2011-Dec-17 06:03:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-17 06:03:40 LOG5 begin_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2011-Dec-17 06:03:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-17 06:03:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 06:03:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:03:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:03:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.159 (still bad) 2011-Dec-17 06:03:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-17 06:03:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36221.00 2011-Dec-17 06:03:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 06:03:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:03:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:03:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 06:03:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:03:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:03:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:03:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 06:03:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 06:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.159 (still bad) 2011-Dec-17 06:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.154 (still bad) 2011-Dec-17 06:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.154 (still bad) 2011-Dec-17 06:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.156 (still bad) 2011-Dec-17 06:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.158 (still bad) 2011-Dec-17 06:03:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 06:03:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-17 06:03:51 LOG5 end_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2011-Dec-17 06:03:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-17 06:03:51 LOG5 end_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2011-Dec-17 06:03:51 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2011-Dec-17 06:03:51 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-17 06:03:51 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-17 06:03:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-17 06:03:51 LOG5 begin_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2011-Dec-17 06:03:51 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-17 06:03:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-17 06:03:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-17 06:03:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-17 06:03:51 LOG5 end_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2011-Dec-17 06:03:51 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2011-Dec-17 06:03:51 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2011-Dec-17 06:03:51 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2011-Dec-17 06:03:51 LOG5 antvel: Calling 'antvel 101314.100000 232740.800000 J Topocentric 0' 2011-Dec-17 06:03:51 LOG2 antvel: Precessing RA = 10:13:14.1 Dec = +23:27:40.8 Epoch = 2011.96168 J 2011-Dec-17 06:03:51 LOG2 antvel: Computed apparent RA = 10:13:55.6 Dec = +23:23:52.2 2011-Dec-17 06:03:51 LOG2 antvel: Parameters to Doppler: Topocentric 36231 2011 351 0.0 2011-Dec-17 06:03:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-17 06:03:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2011-Dec-17 06:03:51 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2011-Dec-17 06:03:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-17 06:03:51 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-17 06:03:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-17 06:03:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:03:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2011-Dec-17 06:03:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-17 06:03:51 LOG5 begin_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2011-Dec-17 06:03:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2011-Dec-17 06:03:51 LOG5 log_alfabeam: Parameters: 10.220583333333336 23.461333333333329 11.326458 2011.9616774089286 18.999933 2011-Dec-17 06:03:51 LOG4 log_alfabeam: ALFABEAM 0 10.220583333333341 23.461333333333336 2011-Dec-17 06:03:51 LOG4 log_alfabeam: ALFABEAM 1 10.228258245771055 23.450726643862762 2011-Dec-17 06:03:51 LOG4 log_alfabeam: ALFABEAM 2 10.224671770180548 23.535473165810689 2011-Dec-17 06:03:51 LOG4 log_alfabeam: ALFABEAM 3 10.216993466628686 23.546408679084024 2011-Dec-17 06:03:51 LOG4 log_alfabeam: ALFABEAM 4 10.212904319010319 23.471638043818896 2011-Dec-17 06:03:51 LOG4 log_alfabeam: ALFABEAM 5 10.216524236551969 23.386702753196214 2011-Dec-17 06:03:51 LOG4 log_alfabeam: ALFABEAM 6 10.224199737968767 23.376726741332241 2011-Dec-17 06:03:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135100026 2011-Dec-17 06:03:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-17 06:03:52 LOG5 begin_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2011-Dec-17 06:03:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 06:03:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-17 06:03:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:03:52 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-17 06:03:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2011-Dec-17 06:03:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36233.00 2011-Dec-17 06:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.156 (still bad) 2011-Dec-17 06:03:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 06:03:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:03:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:03:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 06:03:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:03:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:03:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:03:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 06:03:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 06:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.390 (still bad) 2011-Dec-17 06:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.566 (still bad) 2011-Dec-17 06:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.560 (still bad) 2011-Dec-17 06:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.564 (still bad) 2011-Dec-17 06:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.570 (still bad) 2011-Dec-17 06:04:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 06:04:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-17 06:04:03 LOG5 end_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2011-Dec-17 06:04:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-17 06:04:03 LOG5 end_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2011-Dec-17 06:04:03 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2011-Dec-17 06:04:03 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2011-Dec-17 06:04:03 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2011-Dec-17 06:04:03 LOG5 antvel: Calling 'antvel 101314.100000 232740.800000 J Topocentric 0' 2011-Dec-17 06:04:03 LOG2 antvel: Precessing RA = 10:13:14.1 Dec = +23:27:40.8 Epoch = 2011.96168 J 2011-Dec-17 06:04:03 LOG2 antvel: Computed apparent RA = 10:13:55.6 Dec = +23:23:52.2 2011-Dec-17 06:04:03 LOG2 antvel: Parameters to Doppler: Topocentric 36243 2011 351 0.0 2011-Dec-17 06:04:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-17 06:04:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2011-Dec-17 06:04:03 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2011-Dec-17 06:04:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-17 06:04:03 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-17 06:04:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-17 06:04:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:04:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2011-Dec-17 06:04:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-17 06:04:03 LOG5 begin_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2011-Dec-17 06:04:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2011-Dec-17 06:04:03 LOG5 log_alfabeam: Parameters: 10.220583333333336 23.461333333333329 11.329800 2011.9616777891856 18.999933 2011-Dec-17 06:04:03 LOG4 log_alfabeam: ALFABEAM 0 10.220583333333339 23.461333333333325 2011-Dec-17 06:04:03 LOG4 log_alfabeam: ALFABEAM 1 10.228259073450262 23.450839944379695 2011-Dec-17 06:04:03 LOG4 log_alfabeam: ALFABEAM 2 10.224665965590443 23.535533984971313 2011-Dec-17 06:04:03 LOG4 log_alfabeam: ALFABEAM 3 10.216986805318719 23.546355080751905 2011-Dec-17 06:04:03 LOG4 log_alfabeam: ALFABEAM 4 10.212903529563585 23.471525312866937 2011-Dec-17 06:04:03 LOG4 log_alfabeam: ALFABEAM 5 10.216530002843372 23.386643717096252 2011-Dec-17 06:04:03 LOG4 log_alfabeam: ALFABEAM 6 10.224206265659133 23.376779317557993 2011-Dec-17 06:04:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135100027 2011-Dec-17 06:04:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-17 06:04:04 LOG5 begin_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2011-Dec-17 06:04:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 06:04:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-17 06:04:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:04:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:04:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:04:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2011-Dec-17 06:04:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36245.00 2011-Dec-17 06:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.563 (still bad) 2011-Dec-17 06:04:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 06:04:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:04:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:04:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 06:04:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:04:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:04:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:04:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 06:04:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 06:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.608 (still bad) 2011-Dec-17 06:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.608 (still bad) 2011-Dec-17 06:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.609 (still bad) 2011-Dec-17 06:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.612 (still bad) 2011-Dec-17 06:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.611 (still bad) 2011-Dec-17 06:04:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 06:04:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-17 06:04:15 LOG5 end_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2011-Dec-17 06:04:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-17 06:04:15 LOG5 end_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2011-Dec-17 06:04:15 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2011-Dec-17 06:04:15 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2011-Dec-17 06:04:15 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2011-Dec-17 06:04:15 LOG5 antvel: Calling 'antvel 101314.100000 232740.800000 J Topocentric 0' 2011-Dec-17 06:04:15 LOG2 antvel: Precessing RA = 10:13:14.1 Dec = +23:27:40.8 Epoch = 2011.96168 J 2011-Dec-17 06:04:15 LOG2 antvel: Computed apparent RA = 10:13:55.6 Dec = +23:23:52.2 2011-Dec-17 06:04:15 LOG2 antvel: Parameters to Doppler: Topocentric 36255 2011 351 0.0 2011-Dec-17 06:04:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-17 06:04:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2011-Dec-17 06:04:15 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2011-Dec-17 06:04:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-17 06:04:15 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-17 06:04:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-17 06:04:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:04:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2011-Dec-17 06:04:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-17 06:04:15 LOG5 begin_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2011-Dec-17 06:04:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2011-Dec-17 06:04:15 LOG5 log_alfabeam: Parameters: 10.220583333333336 23.461333333333329 11.333143 2011.9616781694426 18.999933 2011-Dec-17 06:04:15 LOG4 log_alfabeam: ALFABEAM 0 10.220583333333339 23.461333333333325 2011-Dec-17 06:04:15 LOG4 log_alfabeam: ALFABEAM 1 10.228259888779816 23.450952767744312 2011-Dec-17 06:04:15 LOG4 log_alfabeam: ALFABEAM 2 10.224660181318413 23.535594455829656 2011-Dec-17 06:04:15 LOG4 log_alfabeam: ALFABEAM 3 10.216980176992342 23.546301616044310 2011-Dec-17 06:04:15 LOG4 log_alfabeam: ALFABEAM 4 10.212902752209365 23.471413057018619 2011-Dec-17 06:04:15 LOG4 log_alfabeam: ALFABEAM 5 10.216535748755154 23.386585019411172 2011-Dec-17 06:04:15 LOG4 log_alfabeam: ALFABEAM 6 10.224212761185333 23.376831761906370 2011-Dec-17 06:04:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135100028 2011-Dec-17 06:04:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-17 06:04:16 LOG5 begin_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2011-Dec-17 06:04:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 06:04:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-17 06:04:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:04:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:04:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:04:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2011-Dec-17 06:04:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36257.00 2011-Dec-17 06:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.609 (still bad) 2011-Dec-17 06:04:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 06:04:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:04:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:04:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 06:04:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:04:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:04:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:04:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 06:04:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 06:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.608 (still bad) 2011-Dec-17 06:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.606 (still bad) 2011-Dec-17 06:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.609 (still bad) 2011-Dec-17 06:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.608 (still bad) 2011-Dec-17 06:04:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 06:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.607 (still bad) 2011-Dec-17 06:04:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-17 06:04:27 LOG5 end_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2011-Dec-17 06:04:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-17 06:04:27 LOG5 end_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2011-Dec-17 06:04:27 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2011-Dec-17 06:04:27 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2011-Dec-17 06:04:27 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2011-Dec-17 06:04:27 LOG5 antvel: Calling 'antvel 101314.100000 232740.800000 J Topocentric 0' 2011-Dec-17 06:04:27 LOG2 antvel: Precessing RA = 10:13:14.1 Dec = +23:27:40.8 Epoch = 2011.96168 J 2011-Dec-17 06:04:27 LOG2 antvel: Computed apparent RA = 10:13:55.6 Dec = +23:23:52.2 2011-Dec-17 06:04:27 LOG2 antvel: Parameters to Doppler: Topocentric 36267 2011 351 0.0 2011-Dec-17 06:04:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-17 06:04:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2011-Dec-17 06:04:27 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2011-Dec-17 06:04:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-17 06:04:27 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-17 06:04:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-17 06:04:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:04:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2011-Dec-17 06:04:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-17 06:04:27 LOG5 begin_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2011-Dec-17 06:04:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2011-Dec-17 06:04:27 LOG5 log_alfabeam: Parameters: 10.220583333333336 23.461333333333329 11.336485 2011.9616785496996 18.999933 2011-Dec-17 06:04:27 LOG4 log_alfabeam: ALFABEAM 0 10.220583333333341 23.461333333333336 2011-Dec-17 06:04:27 LOG4 log_alfabeam: ALFABEAM 1 10.228260691422275 23.451065050318974 2011-Dec-17 06:04:27 LOG4 log_alfabeam: ALFABEAM 2 10.224654420684301 23.535654545547075 2011-Dec-17 06:04:27 LOG4 log_alfabeam: ALFABEAM 3 10.216973585320268 23.546248316395690 2011-Dec-17 06:04:27 LOG4 log_alfabeam: ALFABEAM 4 10.212901987264942 23.471301339581416 2011-Dec-17 06:04:27 LOG4 log_alfabeam: ALFABEAM 5 10.216541470992919 23.386526692002523 2011-Dec-17 06:04:27 LOG4 log_alfabeam: ALFABEAM 6 10.224219220948617 23.376884043567141 2011-Dec-17 06:04:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135100029 2011-Dec-17 06:04:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-17 06:04:28 LOG5 begin_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2011-Dec-17 06:04:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 06:04:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-17 06:04:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:04:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:04:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:04:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2011-Dec-17 06:04:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36269.00 2011-Dec-17 06:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.607 (still bad) 2011-Dec-17 06:04:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 06:04:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:04:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:04:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 06:04:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:04:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:04:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:04:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 06:04:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 06:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.595 (still bad) 2011-Dec-17 06:04:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-17 06:04:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.330 1.274 1.336 1.406 2011-Dec-17 06:04:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.344 1.523 1.302 1.356 2011-Dec-17 06:04:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.144 1.398 1.434 1.593 2011-Dec-17 06:04:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.341 0.025 1.461 0.020 2011-Dec-17 06:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.591 (still bad) 2011-Dec-17 06:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.594 (still bad) 2011-Dec-17 06:04:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 06:04:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-17 06:04:39 LOG5 end_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2011-Dec-17 06:04:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-17 06:04:39 LOG5 end_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2011-Dec-17 06:04:39 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2011-Dec-17 06:04:39 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2011-Dec-17 06:04:39 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2011-Dec-17 06:04:39 LOG5 antvel: Calling 'antvel 101314.100000 232740.800000 J Topocentric 0' 2011-Dec-17 06:04:39 LOG2 antvel: Precessing RA = 10:13:14.1 Dec = +23:27:40.8 Epoch = 2011.96168 J 2011-Dec-17 06:04:39 LOG2 antvel: Computed apparent RA = 10:13:55.6 Dec = +23:23:52.2 2011-Dec-17 06:04:39 LOG2 antvel: Parameters to Doppler: Topocentric 36279 2011 351 0.0 2011-Dec-17 06:04:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-17 06:04:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2011-Dec-17 06:04:39 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2011-Dec-17 06:04:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-17 06:04:39 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-17 06:04:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-17 06:04:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:04:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2011-Dec-17 06:04:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-17 06:04:39 LOG5 begin_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2011-Dec-17 06:04:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2011-Dec-17 06:04:39 LOG5 log_alfabeam: Parameters: 10.220583333333336 23.461333333333329 11.339827 2011.9616789299566 18.999933 2011-Dec-17 06:04:39 LOG4 log_alfabeam: ALFABEAM 0 10.220583333333339 23.461333333333325 2011-Dec-17 06:04:39 LOG4 log_alfabeam: ALFABEAM 1 10.228261481771623 23.451176829752836 2011-Dec-17 06:04:39 LOG4 log_alfabeam: ALFABEAM 2 10.224648681814875 23.535714275566885 2011-Dec-17 06:04:39 LOG4 log_alfabeam: ALFABEAM 3 10.216967028022962 23.546195165236895 2011-Dec-17 06:04:39 LOG4 log_alfabeam: ALFABEAM 4 10.212901234350289 23.471190123085623 2011-Dec-17 06:04:39 LOG4 log_alfabeam: ALFABEAM 5 10.216547171420848 23.386468714041829 2011-Dec-17 06:04:39 LOG4 log_alfabeam: ALFABEAM 6 10.224225647181250 23.376936178817214 2011-Dec-17 06:04:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135100030 2011-Dec-17 06:04:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-17 06:04:40 LOG5 begin_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2011-Dec-17 06:04:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 06:04:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-17 06:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.594 (still bad) 2011-Dec-17 06:04:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:04:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:04:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:04:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2011-Dec-17 06:04:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36281.00 2011-Dec-17 06:04:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 06:04:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:04:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:04:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 06:04:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:04:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:04:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:04:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 06:04:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 06:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.560 (still bad) 2011-Dec-17 06:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.562 (still bad) 2011-Dec-17 06:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.561 (still bad) 2011-Dec-17 06:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.562 (still bad) 2011-Dec-17 06:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.562 (still bad) 2011-Dec-17 06:04:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 06:04:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-17 06:04:51 LOG5 end_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2011-Dec-17 06:04:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-17 06:04:51 LOG5 end_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2011-Dec-17 06:04:51 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2011-Dec-17 06:04:51 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2011-Dec-17 06:04:51 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2011-Dec-17 06:04:51 LOG5 antvel: Calling 'antvel 101314.100000 232740.800000 J Topocentric 0' 2011-Dec-17 06:04:51 LOG2 antvel: Precessing RA = 10:13:14.1 Dec = +23:27:40.8 Epoch = 2011.96168 J 2011-Dec-17 06:04:51 LOG2 antvel: Computed apparent RA = 10:13:55.6 Dec = +23:23:52.2 2011-Dec-17 06:04:51 LOG2 antvel: Parameters to Doppler: Topocentric 36291 2011 351 0.0 2011-Dec-17 06:04:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-17 06:04:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2011-Dec-17 06:04:51 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2011-Dec-17 06:04:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-17 06:04:51 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-17 06:04:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-17 06:04:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:04:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2011-Dec-17 06:04:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-17 06:04:51 LOG5 begin_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2011-Dec-17 06:04:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2011-Dec-17 06:04:51 LOG5 log_alfabeam: Parameters: 10.220583333333336 23.461333333333329 11.343170 2011.9616793102139 18.999933 2011-Dec-17 06:04:51 LOG4 log_alfabeam: ALFABEAM 0 10.220583333333339 23.461333333333336 2011-Dec-17 06:04:51 LOG4 log_alfabeam: ALFABEAM 1 10.228262260205064 23.451288143057319 2011-Dec-17 06:04:51 LOG4 log_alfabeam: ALFABEAM 2 10.224642962863953 23.535773666864095 2011-Dec-17 06:04:51 LOG4 log_alfabeam: ALFABEAM 3 10.216960502865145 23.546142146174443 2011-Dec-17 06:04:51 LOG4 log_alfabeam: ALFABEAM 4 10.212900493101809 23.471079370696760 2011-Dec-17 06:04:51 LOG4 log_alfabeam: ALFABEAM 5 10.216552851876026 23.386411065155951 2011-Dec-17 06:04:51 LOG4 log_alfabeam: ALFABEAM 6 10.224232042072369 23.376988183759824 2011-Dec-17 06:04:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135100031 2011-Dec-17 06:04:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-17 06:04:52 LOG5 begin_task: Level: (4) ID = <10330> Status = 0 0 0 0 ok 2011-Dec-17 06:04:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 06:04:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-17 06:04:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:04:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:04:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.562 (still bad) 2011-Dec-17 06:04:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2011-Dec-17 06:04:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36293.00 2011-Dec-17 06:04:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 06:04:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:04:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:04:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 06:04:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:04:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:04:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:04:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 06:04:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 06:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.554 (still bad) 2011-Dec-17 06:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.555 (still bad) 2011-Dec-17 06:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.552 (still bad) 2011-Dec-17 06:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.555 (still bad) 2011-Dec-17 06:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.556 (still bad) 2011-Dec-17 06:05:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 06:05:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-17 06:05:03 LOG5 end_task: Level: (4) ID = <10330> Status = 0 0 0 0 ok 2011-Dec-17 06:05:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-17 06:05:03 LOG5 end_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2011-Dec-17 06:05:03 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2011-Dec-17 06:05:03 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2011-Dec-17 06:05:03 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2011-Dec-17 06:05:03 LOG5 antvel: Calling 'antvel 101314.100000 232740.800000 J Topocentric 0' 2011-Dec-17 06:05:03 LOG2 antvel: Precessing RA = 10:13:14.1 Dec = +23:27:40.8 Epoch = 2011.96168 J 2011-Dec-17 06:05:03 LOG2 antvel: Computed apparent RA = 10:13:55.6 Dec = +23:23:52.2 2011-Dec-17 06:05:03 LOG2 antvel: Parameters to Doppler: Topocentric 36303 2011 351 0.0 2011-Dec-17 06:05:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-17 06:05:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2011-Dec-17 06:05:03 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2011-Dec-17 06:05:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-17 06:05:03 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-17 06:05:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-17 06:05:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:05:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2011-Dec-17 06:05:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-17 06:05:03 LOG5 begin_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2011-Dec-17 06:05:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2011-Dec-17 06:05:03 LOG5 log_alfabeam: Parameters: 10.220583333333336 23.461333333333329 11.346512 2011.9616796904709 18.999933 2011-Dec-17 06:05:03 LOG4 log_alfabeam: ALFABEAM 0 10.220583333333341 23.461333333333318 2011-Dec-17 06:05:03 LOG4 log_alfabeam: ALFABEAM 1 10.228263026401025 23.451398927391686 2011-Dec-17 06:05:03 LOG4 log_alfabeam: ALFABEAM 2 10.224637267115211 23.535832687132615 2011-Dec-17 06:05:03 LOG4 log_alfabeam: ALFABEAM 3 10.216954013465076 23.546089290369796 2011-Dec-17 06:05:03 LOG4 log_alfabeam: ALFABEAM 4 10.212899763821314 23.470969144929342 2011-Dec-17 06:05:03 LOG4 log_alfabeam: ALFABEAM 5 10.216558509100135 23.386353776689862 2011-Dec-17 06:05:03 LOG4 log_alfabeam: ALFABEAM 6 10.224238402074384 23.377040027852530 2011-Dec-17 06:05:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135100032 2011-Dec-17 06:05:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-17 06:05:04 LOG5 begin_task: Level: (4) ID = <10332> Status = 0 0 0 0 ok 2011-Dec-17 06:05:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 06:05:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-17 06:05:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:05:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:05:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:05:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2011-Dec-17 06:05:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36305.00 2011-Dec-17 06:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.555 (still bad) 2011-Dec-17 06:05:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 06:05:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:05:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:05:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 06:05:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:05:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:05:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:05:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 06:05:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 06:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.550 (still bad) 2011-Dec-17 06:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.552 (still bad) 2011-Dec-17 06:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.552 (still bad) 2011-Dec-17 06:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.551 (still bad) 2011-Dec-17 06:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.552 (still bad) 2011-Dec-17 06:05:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 06:05:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-17 06:05:15 LOG5 end_task: Level: (4) ID = <10332> Status = 0 0 0 0 ok 2011-Dec-17 06:05:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-17 06:05:15 LOG5 end_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2011-Dec-17 06:05:15 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2011-Dec-17 06:05:15 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2011-Dec-17 06:05:15 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2011-Dec-17 06:05:15 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-17 06:05:15 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-17 06:05:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-17 06:05:15 LOG5 begin_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2011-Dec-17 06:05:15 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-17 06:05:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-17 06:05:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-17 06:05:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-17 06:05:15 LOG5 end_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2011-Dec-17 06:05:15 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2011-Dec-17 06:05:15 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2011-Dec-17 06:05:15 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-17 06:05:15 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2011-Dec-17 06:05:15 LOG5 antvel: Calling 'antvel 101314.100000 232740.800000 J Topocentric 0' 2011-Dec-17 06:05:15 LOG2 antvel: Precessing RA = 10:13:14.1 Dec = +23:27:40.8 Epoch = 2011.96168 J 2011-Dec-17 06:05:15 LOG2 antvel: Computed apparent RA = 10:13:55.6 Dec = +23:23:52.2 2011-Dec-17 06:05:15 LOG2 antvel: Parameters to Doppler: Topocentric 36315 2011 351 0.0 2011-Dec-17 06:05:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-17 06:05:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2011-Dec-17 06:05:15 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2011-Dec-17 06:05:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-17 06:05:15 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-17 06:05:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-17 06:05:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:05:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2011-Dec-17 06:05:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-17 06:05:15 LOG5 begin_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2011-Dec-17 06:05:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-17 06:05:15 LOG5 log_alfabeam: Parameters: 10.220583333333336 23.461333333333329 11.349855 2011.9616800707279 18.999933 2011-Dec-17 06:05:15 LOG4 log_alfabeam: ALFABEAM 0 10.220583333333341 23.461333333333332 2011-Dec-17 06:05:15 LOG4 log_alfabeam: ALFABEAM 1 10.228263780960249 23.451509252775011 2011-Dec-17 06:05:15 LOG4 log_alfabeam: ALFABEAM 2 10.224631591023211 23.535891374882912 2011-Dec-17 06:05:15 LOG4 log_alfabeam: ALFABEAM 3 10.216947555656606 23.546036565631670 2011-Dec-17 06:05:15 LOG4 log_alfabeam: ALFABEAM 4 10.212899045932630 23.470859376108109 2011-Dec-17 06:05:15 LOG4 log_alfabeam: ALFABEAM 5 10.216564146617873 23.386296811250112 2011-Dec-17 06:05:15 LOG4 log_alfabeam: ALFABEAM 6 10.224244731268820 23.377091742693068 2011-Dec-17 06:05:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135100033 2011-Dec-17 06:05:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-17 06:05:16 LOG5 begin_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2011-Dec-17 06:05:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 06:05:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-17 06:05:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:05:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:05:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:05:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-17 06:05:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36317.00 2011-Dec-17 06:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.553 (still bad) 2011-Dec-17 06:05:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 06:05:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:05:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:05:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 06:05:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:05:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:05:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:05:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 06:05:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 06:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.182 (still bad) 2011-Dec-17 06:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.184 (still bad) 2011-Dec-17 06:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.182 (still bad) 2011-Dec-17 06:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.185 (still bad) 2011-Dec-17 06:05:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 06:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.187 (still bad) 2011-Dec-17 06:05:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-17 06:05:27 LOG5 end_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2011-Dec-17 06:05:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-17 06:05:27 LOG5 end_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2011-Dec-17 06:05:27 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2011-Dec-17 06:05:27 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-17 06:05:27 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2011-Dec-17 06:05:27 LOG5 antvel: Calling 'antvel 101314.100000 232740.800000 J Topocentric 0' 2011-Dec-17 06:05:27 LOG2 antvel: Precessing RA = 10:13:14.1 Dec = +23:27:40.8 Epoch = 2011.96168 J 2011-Dec-17 06:05:27 LOG2 antvel: Computed apparent RA = 10:13:55.6 Dec = +23:23:52.2 2011-Dec-17 06:05:27 LOG2 antvel: Parameters to Doppler: Topocentric 36327 2011 351 0.0 2011-Dec-17 06:05:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-17 06:05:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2011-Dec-17 06:05:27 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2011-Dec-17 06:05:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-17 06:05:27 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-17 06:05:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-17 06:05:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:05:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2011-Dec-17 06:05:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-17 06:05:27 LOG5 begin_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2011-Dec-17 06:05:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-17 06:05:27 LOG5 log_alfabeam: Parameters: 10.220583333333336 23.461333333333329 11.353197 2011.9616804509849 18.999933 2011-Dec-17 06:05:27 LOG4 log_alfabeam: ALFABEAM 0 10.220583333333339 23.461333333333336 2011-Dec-17 06:05:27 LOG4 log_alfabeam: ALFABEAM 1 10.228264523571463 23.451619056888447 2011-Dec-17 06:05:27 LOG4 log_alfabeam: ALFABEAM 2 10.224625937847913 23.535949698156799 2011-Dec-17 06:05:27 LOG4 log_alfabeam: ALFABEAM 3 10.216941133023713 23.545984002941879 2011-Dec-17 06:05:27 LOG4 log_alfabeam: ALFABEAM 4 10.212898339727509 23.470750126228285 2011-Dec-17 06:05:27 LOG4 log_alfabeam: ALFABEAM 5 10.216569761194592 23.386240199844288 2011-Dec-17 06:05:27 LOG4 log_alfabeam: ALFABEAM 6 10.224251026141555 23.377143297915165 2011-Dec-17 06:05:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135100034 2011-Dec-17 06:05:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-17 06:05:28 LOG5 begin_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2011-Dec-17 06:05:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-17 06:05:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 06:05:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:05:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:05:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:05:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-17 06:05:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36329.00 2011-Dec-17 06:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.184 (still bad) 2011-Dec-17 06:05:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 06:05:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:05:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:05:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 06:05:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:05:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:05:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:05:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 06:05:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 06:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.218 (still bad) 2011-Dec-17 06:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.218 (still bad) 2011-Dec-17 06:05:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-17 06:05:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.985 0.969 1.011 1.082 2011-Dec-17 06:05:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.992 1.125 0.983 1.027 2011-Dec-17 06:05:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.945 1.036 1.074 1.217 2011-Dec-17 06:05:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.978 0.025 1.066 0.020 2011-Dec-17 06:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.219 (still bad) 2011-Dec-17 06:05:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 06:05:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-17 06:05:39 LOG5 end_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2011-Dec-17 06:05:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-17 06:05:39 LOG5 end_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2011-Dec-17 06:05:39 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2011-Dec-17 06:05:39 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-17 06:05:39 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2011-Dec-17 06:05:39 LOG5 antvel: Calling 'antvel 101314.100000 232740.800000 J Topocentric 0' 2011-Dec-17 06:05:39 LOG2 antvel: Precessing RA = 10:13:14.1 Dec = +23:27:40.8 Epoch = 2011.96168 J 2011-Dec-17 06:05:39 LOG2 antvel: Computed apparent RA = 10:13:55.6 Dec = +23:23:52.2 2011-Dec-17 06:05:39 LOG2 antvel: Parameters to Doppler: Topocentric 36339 2011 351 0.0 2011-Dec-17 06:05:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-17 06:05:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2011-Dec-17 06:05:39 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2011-Dec-17 06:05:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-17 06:05:39 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-17 06:05:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-17 06:05:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:05:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2011-Dec-17 06:05:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-17 06:05:39 LOG5 begin_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2011-Dec-17 06:05:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-17 06:05:39 LOG5 log_alfabeam: Parameters: 10.220583333333336 23.461333333333329 11.356540 2011.9616808312419 18.999933 2011-Dec-17 06:05:39 LOG4 log_alfabeam: ALFABEAM 0 10.220583333333341 23.461333333333332 2011-Dec-17 06:05:39 LOG4 log_alfabeam: ALFABEAM 1 10.228265254817376 23.451728409095921 2011-Dec-17 06:05:39 LOG4 log_alfabeam: ALFABEAM 2 10.224620304071264 23.536007694975556 2011-Dec-17 06:05:39 LOG4 log_alfabeam: ALFABEAM 3 10.216934741446122 23.545931570281201 2011-Dec-17 06:05:39 LOG4 log_alfabeam: ALFABEAM 4 10.212897644647448 23.470641326267064 2011-Dec-17 06:05:39 LOG4 log_alfabeam: ALFABEAM 5 10.216575356327475 23.386183905554674 2011-Dec-17 06:05:39 LOG4 log_alfabeam: ALFABEAM 6 10.224257290729383 23.377194724946040 2011-Dec-17 06:05:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135100035 2011-Dec-17 06:05:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-17 06:05:40 LOG5 begin_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2011-Dec-17 06:05:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 06:05:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-17 06:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.219 (still bad) 2011-Dec-17 06:05:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:05:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:05:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:05:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-17 06:05:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36341.00 2011-Dec-17 06:05:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 06:05:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:05:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:05:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 06:05:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:05:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:05:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:05:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 06:05:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 06:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.219 (still bad) 2011-Dec-17 06:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.218 (still bad) 2011-Dec-17 06:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.215 (still bad) 2011-Dec-17 06:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.216 (still bad) 2011-Dec-17 06:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.220 (still bad) 2011-Dec-17 06:05:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 06:05:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-17 06:05:51 LOG5 end_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2011-Dec-17 06:05:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-17 06:05:51 LOG5 end_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2011-Dec-17 06:05:51 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2011-Dec-17 06:05:51 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-17 06:05:51 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2011-Dec-17 06:05:51 LOG5 antvel: Calling 'antvel 101314.100000 232740.800000 J Topocentric 0' 2011-Dec-17 06:05:51 LOG2 antvel: Precessing RA = 10:13:14.1 Dec = +23:27:40.8 Epoch = 2011.96168 J 2011-Dec-17 06:05:51 LOG2 antvel: Computed apparent RA = 10:13:55.6 Dec = +23:23:52.2 2011-Dec-17 06:05:51 LOG2 antvel: Parameters to Doppler: Topocentric 36351 2011 351 0.0 2011-Dec-17 06:05:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-17 06:05:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2011-Dec-17 06:05:51 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2011-Dec-17 06:05:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-17 06:05:51 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-17 06:05:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-17 06:05:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:05:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2011-Dec-17 06:05:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-17 06:05:51 LOG5 begin_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2011-Dec-17 06:05:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-17 06:05:51 LOG5 log_alfabeam: Parameters: 10.220583333333336 23.461333333333329 11.359882 2011.9616812114991 18.999933 2011-Dec-17 06:05:51 LOG4 log_alfabeam: ALFABEAM 0 10.220583333333341 23.461333333333343 2011-Dec-17 06:05:51 LOG4 log_alfabeam: ALFABEAM 1 10.228265974396827 23.451837247593129 2011-Dec-17 06:05:51 LOG4 log_alfabeam: ALFABEAM 2 10.224614692929801 23.536065333723222 2011-Dec-17 06:05:51 LOG4 log_alfabeam: ALFABEAM 3 10.216928384474011 23.545879298453677 2011-Dec-17 06:05:51 LOG4 log_alfabeam: ALFABEAM 4 10.212896960974346 23.470533037707863 2011-Dec-17 06:05:51 LOG4 log_alfabeam: ALFABEAM 5 10.216580928805254 23.386127959056996 2011-Dec-17 06:05:51 LOG4 log_alfabeam: ALFABEAM 6 10.224263521551132 23.377245993593839 2011-Dec-17 06:05:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135100036 2011-Dec-17 06:05:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-17 06:05:52 LOG5 begin_task: Level: (4) ID = <10341> Status = 0 0 0 0 ok 2011-Dec-17 06:05:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 06:05:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-17 06:05:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:05:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:05:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.218 (still bad) 2011-Dec-17 06:05:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-17 06:05:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36353.00 2011-Dec-17 06:05:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 06:05:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:05:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:05:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 06:05:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:05:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:05:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:05:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 06:05:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 06:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.218 (still bad) 2011-Dec-17 06:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.206 (still bad) 2011-Dec-17 06:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.208 (still bad) 2011-Dec-17 06:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.208 (still bad) 2011-Dec-17 06:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.209 (still bad) 2011-Dec-17 06:06:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 06:06:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-17 06:06:03 LOG5 end_task: Level: (4) ID = <10341> Status = 0 0 0 0 ok 2011-Dec-17 06:06:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-17 06:06:03 LOG5 end_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2011-Dec-17 06:06:03 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2011-Dec-17 06:06:03 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-17 06:06:03 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2011-Dec-17 06:06:03 LOG5 antvel: Calling 'antvel 101314.100000 232740.800000 J Topocentric 0' 2011-Dec-17 06:06:03 LOG2 antvel: Precessing RA = 10:13:14.1 Dec = +23:27:40.8 Epoch = 2011.96168 J 2011-Dec-17 06:06:03 LOG2 antvel: Computed apparent RA = 10:13:55.6 Dec = +23:23:52.2 2011-Dec-17 06:06:03 LOG2 antvel: Parameters to Doppler: Topocentric 36363 2011 351 0.0 2011-Dec-17 06:06:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-17 06:06:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2011-Dec-17 06:06:03 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2011-Dec-17 06:06:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-17 06:06:03 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-17 06:06:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-17 06:06:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:06:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2011-Dec-17 06:06:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-17 06:06:03 LOG5 begin_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2011-Dec-17 06:06:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-17 06:06:03 LOG5 log_alfabeam: Parameters: 10.220583333333336 23.461333333333329 11.363225 2011.9616815917561 18.999933 2011-Dec-17 06:06:03 LOG4 log_alfabeam: ALFABEAM 0 10.220583333333339 23.461333333333325 2011-Dec-17 06:06:03 LOG4 log_alfabeam: ALFABEAM 1 10.228266682874933 23.451945641099122 2011-Dec-17 06:06:03 LOG4 log_alfabeam: ALFABEAM 2 10.224609100932522 23.536122651941280 2011-Dec-17 06:06:03 LOG4 log_alfabeam: ALFABEAM 3 10.216922058032177 23.545827155611295 2011-Dec-17 06:06:03 LOG4 log_alfabeam: ALFABEAM 4 10.212896288166927 23.470425192170168 2011-Dec-17 06:06:03 LOG4 log_alfabeam: ALFABEAM 5 10.216586482097926 23.386072323900041 2011-Dec-17 06:06:03 LOG4 log_alfabeam: ALFABEAM 6 10.224269722599630 23.377297135116223 2011-Dec-17 06:06:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135100037 2011-Dec-17 06:06:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-17 06:06:04 LOG5 begin_task: Level: (4) ID = <10343> Status = 0 0 0 0 ok 2011-Dec-17 06:06:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 06:06:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-17 06:06:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:06:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:06:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:06:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-17 06:06:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36365.00 2011-Dec-17 06:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.208 (still bad) 2011-Dec-17 06:06:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 06:06:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:06:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:06:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 06:06:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:06:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:06:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:06:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 06:06:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 06:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.184 (still bad) 2011-Dec-17 06:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.184 (still bad) 2011-Dec-17 06:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.184 (still bad) 2011-Dec-17 06:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.184 (still bad) 2011-Dec-17 06:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.185 (still bad) 2011-Dec-17 06:06:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 06:06:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-17 06:06:15 LOG5 end_task: Level: (4) ID = <10343> Status = 0 0 0 0 ok 2011-Dec-17 06:06:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-17 06:06:15 LOG5 end_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2011-Dec-17 06:06:15 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2011-Dec-17 06:06:15 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-17 06:06:15 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2011-Dec-17 06:06:15 LOG5 antvel: Calling 'antvel 101314.100000 232740.800000 J Topocentric 0' 2011-Dec-17 06:06:15 LOG2 antvel: Precessing RA = 10:13:14.1 Dec = +23:27:40.8 Epoch = 2011.96168 J 2011-Dec-17 06:06:15 LOG2 antvel: Computed apparent RA = 10:13:55.6 Dec = +23:23:52.2 2011-Dec-17 06:06:15 LOG2 antvel: Parameters to Doppler: Topocentric 36375 2011 351 0.0 2011-Dec-17 06:06:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-17 06:06:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2011-Dec-17 06:06:15 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2011-Dec-17 06:06:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-17 06:06:15 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-17 06:06:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-17 06:06:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:06:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2011-Dec-17 06:06:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-17 06:06:15 LOG5 begin_task: Level: (3) ID = <10344> Status = 0 0 0 0 ok 2011-Dec-17 06:06:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-17 06:06:15 LOG5 log_alfabeam: Parameters: 10.220583333333336 23.461333333333329 11.366567 2011.9616819720131 18.999933 2011-Dec-17 06:06:15 LOG4 log_alfabeam: ALFABEAM 0 10.220583333333341 23.461333333333325 2011-Dec-17 06:06:15 LOG4 log_alfabeam: ALFABEAM 1 10.228267379960434 23.452053528316760 2011-Dec-17 06:06:15 LOG4 log_alfabeam: ALFABEAM 2 10.224603531292855 23.536179618350516 2011-Dec-17 06:06:15 LOG4 log_alfabeam: ALFABEAM 3 10.216915765637534 23.545775172382136 2011-Dec-17 06:06:15 LOG4 log_alfabeam: ALFABEAM 4 10.212895626497442 23.470317850632735 2011-Dec-17 06:06:15 LOG4 log_alfabeam: ALFABEAM 5 10.216592013017292 23.386017030432914 2011-Dec-17 06:06:15 LOG4 log_alfabeam: ALFABEAM 6 10.224275890426185 23.377348119493892 2011-Dec-17 06:06:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135100038 2011-Dec-17 06:06:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-17 06:06:16 LOG5 begin_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2011-Dec-17 06:06:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-17 06:06:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-17 06:06:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-17 06:06:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:06:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-17 06:06:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-17 06:06:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36377.00 2011-Dec-17 06:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.185 (still bad) 2011-Dec-17 06:06:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-17 06:06:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:06:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:06:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-17 06:06:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-17 06:06:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:06:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-17 06:06:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-17 06:06:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-17 06:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.180 (still bad) 2011-Dec-17 06:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.180 (still bad) 2011-Dec-17 06:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.180 (still bad) 2011-Dec-17 06:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.181 (still bad) 2011-Dec-17 06:06:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-17 06:06:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-17 06:06:27 LOG5 end_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2011-Dec-17 06:06:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-17 06:06:27 LOG5 end_task: Level: (3) ID = <10344> Status = 0 0 0 0 ok 2011-Dec-17 06:06:27 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2011-Dec-17 06:06:27 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-17 06:06:27 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2011-Dec-17 06:06:27 LOG5 antvel: Calling 'antvel 101314.100000 232740.800000 J Topocentric 0' 2011-Dec-17 06:06:27 LOG2 antvel: Precessing RA = 10:13:14.1 Dec = +23:27:40.8 Epoch = 2011.96168 J 2011-Dec-17 06:06:27 LOG2 antvel: Computed apparent RA = 10:13:55.6 Dec = +23:23:52.2 2011-Dec-17 06:06:27 LOG2 antvel: Parameters to Doppler: Topocentric 36387 2011 351 0.0 2011-Dec-17 06:06:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-17 06:06:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2011-Dec-17 06:06:27 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2011-Dec-17 06:06:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.86076