2011-Dec-16 03:30:44 BEGIN executive: CIMA executive starting ... 2011-Dec-16 03:30:44 NOTE executive: STARTING NEW CIMA SESSION 2011-Dec-16 03:30:44 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2011-Dec-16 03:30:44 INFO4 executive: This is an ON-LINE session 2011-Dec-16 03:30:44 INFO4 executive: This is a LOCAL session 2011-Dec-16 03:30:44 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2011-Dec-16 03:30:44 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'JM' 2011-Dec-16 03:30:44 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20111216' 2011-Dec-16 03:30:45 LOG2 log_preferences: Currently applied preferences: 2011-Dec-16 03:30:45 LOG2 log_preferences: prefs(dailylog) = daily 2011-Dec-16 03:30:45 LOG2 log_preferences: prefs(offlinelog) = skip 2011-Dec-16 03:30:45 LOG2 log_preferences: prefs(datawindow) = ignore 2011-Dec-16 03:30:45 LOG2 log_preferences: prefs(limitwarning) = enabled 2011-Dec-16 03:30:45 LOG2 log_preferences: prefs(wappfailure) = abort 2011-Dec-16 03:30:45 LOG2 log_preferences: prefs(helpstyle) = stay-open 2011-Dec-16 03:30:45 LOG2 log_preferences: prefs(logcolours) = full 2011-Dec-16 03:30:45 LOG2 log_preferences: prefs(displaylevel) = INFO3 2011-Dec-16 03:30:45 LOG2 log_preferences: prefs(loglevel) = LOG5 2011-Dec-16 03:30:45 LOG2 log_preferences: prefs(displayformat) = short 2011-Dec-16 03:30:45 LOG2 log_preferences: prefs(logformat) = new 2011-Dec-16 03:30:45 LOG2 log_preferences: prefs(fontsize) = 4 2011-Dec-16 03:30:45 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2011-Dec-16 03:30:45 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2011-Dec-16 03:30:45 ALERT executive: CIMA executive ready 2011-Dec-16 03:30:46 NOTE frontend: CIMA frontend ready 2011-Dec-16 03:30:47 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:30:47 LOG4 got_cormsg: From DATATAKING: setup 2011-Dec-16 03:30:48 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2011-Dec-16 03:30:48 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2011-Dec-16 03:30:48 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2011-Dec-16 03:30:48 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2011-Dec-16 03:30:48 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Dec-16 03:30:48 NOTE select_receiver: Starting to select receiver ALFA 2011-Dec-16 03:30:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2011-Dec-16 03:30:48 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2011-Dec-16 03:30:48 LOG3 vw_send: To DATATAKING: acvlbical off 2011-Dec-16 03:30:48 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2011-Dec-16 03:30:48 STOP finish_task: Finishing task 'selecting receiver ALFA' 2011-Dec-16 03:30:48 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Dec-16 03:30:48 DONE finish_task: DONE finished selecting: receiver ALFA 2011-Dec-16 03:30:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-16 03:30:48 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2011-Dec-16 03:30:48 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Dec-16 03:30:52 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2011-Dec-16 03:30:52 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2011-Dec-16 03:30:52 LOG4 got_cormsg: From DATATAKING: vw% io 2011-Dec-16 03:30:52 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2011-Dec-16 03:30:52 LOG4 got_cormsg: From DATATAKING: 2011-Dec-16 03:30:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:30:52 LOG4 got_cormsg: From DATATAKING: tape stat 2011-Dec-16 03:30:52 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2011-Dec-16 03:30:52 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2011-Dec-16 03:30:52 LOG4 got_cormsg: From DATATAKING: vw% connectall 2011-Dec-16 03:30:52 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2011-Dec-16 03:30:52 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2011-Dec-16 03:30:52 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2011-Dec-16 03:30:52 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2011-Dec-16 03:30:52 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2011-Dec-16 03:30:53 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2011-Dec-16 03:30:53 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2011-Dec-16 03:30:53 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2011-Dec-16 03:30:53 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2011-Dec-16 03:30:53 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2011-Dec-16 03:30:53 LOG4 got_cormsg: From DATATAKING: acvlbical off 2011-Dec-16 03:30:53 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:30:53 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:30:59 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:31:00 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:31:41 INFO5 CIMA-read_in_command_file: Included command file 'command_galfacurpos_cima31.cmd' (at lines 49 - 65) 2011-Dec-16 03:31:41 INFO4 CIMA-load_command_file: Loaded command file '111216morning.cmd' 2011-Dec-16 03:31:44 INFO1 CIMA-run_command_file: Transferring command file '111216morning.cmd' to executive ... 2011-Dec-16 03:31:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD ages_mock.conf} 2011-Dec-16 03:31:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2011-Dec-16 03:31:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {CATALOG AGESFull.cat} 2011-Dec-16 03:31:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 9 {IF LSTSLEW(AGES3193_p3_157) < 085640 THEN} 2011-Dec-16 03:31:44 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 10 {FIXEDDRIFT az=261.04 alfaangle=-65.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_157 ra=95300.00 dec=195900.00} 2011-Dec-16 03:31:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {ENDIF} 2011-Dec-16 03:31:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 16 {IF LSTSLEW(AGES3193_p3_159) < 092010 THEN} 2011-Dec-16 03:31:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 17 {FIXEDDRIFT az=257.78 alfaangle=-59.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_159 ra=95300.00 dec=195600.00} 2011-Dec-16 03:31:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 20 {ENDIF} 2011-Dec-16 03:31:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 23 {IF LSTSLEW(AGES3193_p3_161) < 094340 THEN} 2011-Dec-16 03:31:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 24 {FIXEDDRIFT az=237.72 alfaangle=-35.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_161 ra=95300.00 dec=195300.00} 2011-Dec-16 03:31:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 27 {ENDIF} 2011-Dec-16 03:31:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 30 {IF LSTSLEW(AGES3193_p3_002) < 100941 THEN} 2011-Dec-16 03:31:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 31 {FIXEDDRIFT az=146.26 alfaangle=50.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_002 ra=95300.00 dec=235130.00} 2011-Dec-16 03:31:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 34 {ENDIF} 2011-Dec-16 03:31:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 37 {IF LSTSLEW(AGES3193_p3_004) < 103311 THEN} 2011-Dec-16 03:31:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 38 {FIXEDDRIFT az=122.05 alfaangle=76.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_004 ra=95300.00 dec=234830.00} 2011-Dec-16 03:31:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 41 {ENDIF} 2011-Dec-16 03:31:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 44 {IF LSTSLEW(AGES3193_p3_006) < 105641 THEN} 2011-Dec-16 03:31:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 45 {FIXEDDRIFT az=112.70 alfaangle=-90.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_006 ra=95300.00 dec=234530.00} 2011-Dec-16 03:31:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 48 {ENDIF} 2011-Dec-16 03:31:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 55 {LOAD togs_cima31.conf} 2011-Dec-16 03:31:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 56 {TRACKCURPOS} 2011-Dec-16 03:31:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 57 {ALFAANGLE 19} 2011-Dec-16 03:31:45 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 61 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2011-Dec-16 03:31:45 COMMAND CIMA-send_to_exec: Sending command to run command file 2011-Dec-16 03:31:45 LOG4 exec_msg: From OBSERVER: run_command_file 111216morning.cmd 1 1 25 2011-Dec-16 03:31:45 LOG4 run_command_file: Calling 'run_command_file 111216morning.cmd 1 1 25' 2011-Dec-16 03:31:45 BEGIN begin_task: Starting task 'running command file '111216morning.cmd'' 2011-Dec-16 03:31:45 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2011-Dec-16 03:31:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '111216morning.cmd' ...} 2011-Dec-16 03:31:45 NOTE run_command_file: Starting execution of command file '111216morning.cmd' from line 1 2011-Dec-16 03:31:45 COMMAND run_command_line: EXECUTING command 4: 'LOAD ages_mock.conf' 2011-Dec-16 03:31:45 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2011-Dec-16 03:31:45 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-16 03:31:45 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2011-Dec-16 03:31:45 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock.conf' 2011-Dec-16 03:31:45 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2011-Dec-16 03:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled1) "1" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled2) "0" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards1) "both" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards2) "both" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode1) "spectra" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode2) "spectra" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg1) "2-pol" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg2) "2-pol" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits1) "32" 2011-Dec-16 03:31:47 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits2) "32" 2011-Dec-16 03:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor1) "1" 2011-Dec-16 03:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor2) "1" 2011-Dec-16 03:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset1) "0.0" 2011-Dec-16 03:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset2) "0.0" 2011-Dec-16 03:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags1) "8192" 2011-Dec-16 03:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags2) "8192" 2011-Dec-16 03:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs1) "1000.0" 2011-Dec-16 03:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs2) "1000.0" 2011-Dec-16 03:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad1) "1" 2011-Dec-16 03:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad2) "0" 2011-Dec-16 03:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors1) "13" 2011-Dec-16 03:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors2) "0" 2011-Dec-16 03:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors1) "0" 2011-Dec-16 03:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors2) "0" 2011-Dec-16 03:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors1) "0" 2011-Dec-16 03:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors2) "0" 2011-Dec-16 03:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors1) "0" 2011-Dec-16 03:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors2) "0" 2011-Dec-16 03:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype1) "fits" 2011-Dec-16 03:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype2) "fits" 2011-Dec-16 03:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2011-Dec-16 03:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2011-Dec-16 03:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2011-Dec-16 03:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2011-Dec-16 03:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2011-Dec-16 03:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2011-Dec-16 03:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2011-Dec-16 03:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2011-Dec-16 03:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2011-Dec-16 03:31:48 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-16 03:31:48 BEGIN begin_task: Starting task 'configuring IF/LO path' 2011-Dec-16 03:31:48 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Dec-16 03:31:48 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2011-Dec-16 03:31:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2011-Dec-16 03:31:48 INFO1 config_iflo: Selecting receiver ALFA 2011-Dec-16 03:31:48 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2011-Dec-16 03:31:48 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2011-Dec-16 03:31:48 START begin_task: Starting task 'selecting receiver ALFA' 2011-Dec-16 03:31:48 LOG5 begin_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Dec-16 03:31:48 NOTE select_receiver: Starting to select receiver ALFA 2011-Dec-16 03:31:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2011-Dec-16 03:31:48 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2011-Dec-16 03:31:48 LOG3 vw_send: To DATATAKING: acvlbical off 2011-Dec-16 03:31:48 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2011-Dec-16 03:31:48 STOP finish_task: Finishing task 'selecting receiver ALFA' 2011-Dec-16 03:31:48 LOG5 finish_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Dec-16 03:31:48 INFO2 finish_task: DONE finished selecting: receiver ALFA 2011-Dec-16 03:31:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 03:31:48 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2011-Dec-16 03:31:48 LOG5 end_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Dec-16 03:31:48 START begin_task: Starting task 'waiting for receiver ALFA' 2011-Dec-16 03:31:48 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2011-Dec-16 03:31:48 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2011-Dec-16 03:31:48 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2011-Dec-16 03:31:48 INFO1 config_iflo: Configuring rest of the IF/LO path 2011-Dec-16 03:31:48 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2011-Dec-16 03:31:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-16 03:31:48 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-16 03:31:48 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-16 03:31:48 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2011-Dec-16 03:31:49 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2011-Dec-16 03:31:49 LOG4 got_cormsg: From DATATAKING: acvlbical off 2011-Dec-16 03:31:49 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-16 03:31:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-16 03:31:49 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2011-Dec-16 03:31:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-16 03:31:49 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-16 03:31:49 LOG3 vw_send: To DATATAKING: alfafb 1 2011-Dec-16 03:31:49 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2011-Dec-16 03:31:49 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2011-Dec-16 03:31:49 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2011-Dec-16 03:31:49 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2011-Dec-16 03:31:49 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2011-Dec-16 03:31:49 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2011-Dec-16 03:31:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2011-Dec-16 03:31:49 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2011-Dec-16 03:31:49 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2011-Dec-16 03:31:49 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2011-Dec-16 03:31:49 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2011-Dec-16 03:31:49 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2011-Dec-16 03:31:49 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2011-Dec-16 03:31:49 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2011-Dec-16 03:31:49 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2011-Dec-16 03:31:49 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2011-Dec-16 03:31:49 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2011-Dec-16 03:31:49 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2011-Dec-16 03:31:49 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2011-Dec-16 03:31:49 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2011-Dec-16 03:31:49 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2011-Dec-16 03:31:49 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2011-Dec-16 03:31:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 03:31:49 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2011-Dec-16 03:31:49 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2011-Dec-16 03:31:49 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2011-Dec-16 03:31:49 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2011-Dec-16 03:31:49 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2011-Dec-16 03:31:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2011-Dec-16 03:31:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 03:31:49 START begin_task: Starting task 'waiting on configuring IF/LO path' 2011-Dec-16 03:31:49 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2011-Dec-16 03:31:49 LOG4 got_cormsg: From DATATAKING: alfafb 1 2011-Dec-16 03:31:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2011-Dec-16 03:31:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2011-Dec-16 03:31:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2011-Dec-16 03:31:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2011-Dec-16 03:31:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2011-Dec-16 03:31:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2011-Dec-16 03:31:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2011-Dec-16 03:31:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2011-Dec-16 03:31:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2011-Dec-16 03:31:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2011-Dec-16 03:31:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2011-Dec-16 03:31:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2011-Dec-16 03:31:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2011-Dec-16 03:31:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2011-Dec-16 03:31:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 03:31:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2011-Dec-16 03:31:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2011-Dec-16 03:31:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2011-Dec-16 03:31:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2011-Dec-16 03:31:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 03:31:55 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:31:56 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:31:56 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:31:56 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:31:56 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:31:57 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:32:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:32:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:32:02 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:32:02 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:32:02 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:32:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:32:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:32:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:32:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:32:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:32:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:32:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:32:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:32:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:32:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:32:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:32:04 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-16 03:32:04 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2011-Dec-16 03:32:04 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2011-Dec-16 03:32:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2011-Dec-16 03:32:04 STOP finish_task: Finishing task 'configuring IF/LO path' 2011-Dec-16 03:32:04 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Dec-16 03:32:04 DONE finish_task: DONE finished configuration: IF/LO path 2011-Dec-16 03:32:04 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-16 03:32:04 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2011-Dec-16 03:32:04 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Dec-16 03:32:04 BEGIN begin_task: Starting task 'configuring WAPPs' 2011-Dec-16 03:32:05 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2011-Dec-16 03:32:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2011-Dec-16 03:32:05 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2011-Dec-16 03:32:05 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Dec-16 03:32:05 START begin_task: Starting task 'selecting calibration port' 2011-Dec-16 03:32:05 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2011-Dec-16 03:32:05 LOG3 vw_send: To DATATAKING: calport 3 2011-Dec-16 03:32:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Dec-16 03:32:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 03:32:05 START begin_task: Starting task 'waiting on calport' 2011-Dec-16 03:32:05 LOG5 begin_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2011-Dec-16 03:32:05 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:32:05 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Dec-16 03:32:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 03:32:05 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:32:05 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-16 03:32:05 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Dec-16 03:32:05 LOG5 end_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2011-Dec-16 03:32:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Dec-16 03:32:05 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Dec-16 03:32:05 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2011-Dec-16 03:32:05 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-16 03:32:05 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-16 03:32:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-16 03:32:05 LOG5 begin_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2011-Dec-16 03:32:05 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-16 03:32:05 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:32:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-16 03:32:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-16 03:32:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-16 03:32:05 LOG5 end_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2011-Dec-16 03:32:05 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2011-Dec-16 03:32:05 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2011-Dec-16 03:32:05 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2011-Dec-16 03:32:05 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2011-Dec-16 03:32:05 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2011-Dec-16 03:32:05 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2011-Dec-16 03:32:05 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2011-Dec-16 03:32:05 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2011-Dec-16 03:32:05 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2011-Dec-16 03:32:05 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2011-Dec-16 03:32:05 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2011-Dec-16 03:32:05 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2011-Dec-16 03:32:05 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Dec-16 03:32:05 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Dec-16 03:32:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-16 03:32:05 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2011-Dec-16 03:32:05 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-16 03:32:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-16 03:32:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-16 03:32:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-16 03:32:05 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2011-Dec-16 03:32:05 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2011-Dec-16 03:32:05 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2011-Dec-16 03:32:05 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2011-Dec-16 03:32:05 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2011-Dec-16 03:32:06 STOP finish_task: Finishing task 'configuring WAPPs' 2011-Dec-16 03:32:06 LOG5 finish_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2011-Dec-16 03:32:06 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2011-Dec-16 03:32:06 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-16 03:32:06 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2011-Dec-16 03:32:06 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2011-Dec-16 03:32:06 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2011-Dec-16 03:32:06 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2011-Dec-16 03:32:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2011-Dec-16 03:32:06 INFO1 config_mock: Starting to configure the Mock spectrometer 2011-Dec-16 03:32:06 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Dec-16 03:32:06 START begin_task: Starting task 'selecting calibration port' 2011-Dec-16 03:32:06 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2011-Dec-16 03:32:06 LOG3 vw_send: To DATATAKING: calport 3 2011-Dec-16 03:32:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Dec-16 03:32:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 03:32:06 START begin_task: Starting task 'waiting on calport' 2011-Dec-16 03:32:06 LOG5 begin_task: Level: (4) ID = <10015> Status = 0 0 0 0 ok 2011-Dec-16 03:32:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2011-Dec-16 03:32:06 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Dec-16 03:32:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2011-Dec-16 03:32:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2011-Dec-16 03:32:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 03:32:06 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:32:06 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-16 03:32:06 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Dec-16 03:32:06 LOG5 end_task: Level: (4) ID = <10015> Status = 0 0 0 0 ok 2011-Dec-16 03:32:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Dec-16 03:32:06 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Dec-16 03:32:06 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2011-Dec-16 03:32:06 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-16 03:32:06 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-16 03:32:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-16 03:32:06 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2011-Dec-16 03:32:06 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:32:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2011-Dec-16 03:32:06 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-16 03:32:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-16 03:32:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-16 03:32:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-16 03:32:06 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2011-Dec-16 03:32:06 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Dec-16 03:32:06 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Dec-16 03:32:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-16 03:32:06 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2011-Dec-16 03:32:06 NOTE WAPPDATA-new_file: New FITS file: wapp.20111216.a2048.0000.fits 2011-Dec-16 03:32:06 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-16 03:32:06 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20111216.a2048.0000.fits} 2011-Dec-16 03:32:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-16 03:32:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-16 03:32:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-16 03:32:07 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2011-Dec-16 03:32:07 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2011-Dec-16 03:32:07 LOG3 socket_wait: To MOCK: NOP 2011-Dec-16 03:32:07 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2011-Dec-16 03:32:07 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2011-Dec-16 03:32:07 ALERT got_mock_message: Mock spectrometer restarting 2011-Dec-16 03:32:07 LOG4 from_mock: From MOCK: nop ok 2011-Dec-16 03:32:07 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2011-Dec-16 03:32:07 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2011-Dec-16 03:32:07 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2011-Dec-16 03:32:07 LOG2 config_mock: Mock spectrometer configuration group 1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2011-Dec-16 03:32:07 LOG2 config_mock: Mock spectrometer configuration group 1 (0): datatype=AB 2011-Dec-16 03:32:07 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bits=32 2011-Dec-16 03:32:07 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bwmhz=172.032 2011-Dec-16 03:32:07 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevif1hz=250000000 2011-Dec-16 03:32:07 LOG2 config_mock: Mock spectrometer configuration group 1 (0): digfreqoffhz=0.0 2011-Dec-16 03:32:07 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fftlen=8192 2011-Dec-16 03:32:07 LOG2 config_mock: Mock spectrometer configuration group 1 (0): dumptmsec=1.0 2011-Dec-16 03:32:07 LOG2 config_mock: Mock spectrometer configuration group 1 (0): blankatod=1 2011-Dec-16 03:32:07 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskadc=13 2011-Dec-16 03:32:07 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskpfb=0 2011-Dec-16 03:32:07 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskacc=0 2011-Dec-16 03:32:07 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskash=0 2011-Dec-16 03:32:07 LOG2 config_mock: Mock spectrometer configuration group 1 (0): adcclkhz=172032000 2011-Dec-16 03:32:07 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevlohz=175000000 325000000 2011-Dec-16 03:32:07 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fileprefix=a2048 2011-Dec-16 03:32:07 LOG2 config_mock: Mock spectrometer configuration group 1 (0): maxfilesizemb=2048 2011-Dec-16 03:32:07 LOG2 config_mock: Mock spectrometer configuration group 1 (0): calctl=c0 2011-Dec-16 03:32:07 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group 1' using string 'conf' 2011-Dec-16 03:32:07 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bits=32:bwmhz=172.032:pdevif1hz=250000000:digfreqoffhz=0.0:fftlen=8192:dumptmsec=1.0:blankatod=1:emaskadc=13:emaskpfb=0:emaskacc=0:emaskash=0:adcclkhz=172032000:pdevlohz=175000000 325000000:fileprefix=a2048:maxfilesizemb=2048:calctl=c0 2011-Dec-16 03:32:07 START begin_task: Starting task 'waiting on configure Mock spectrometer group 1' 2011-Dec-16 03:32:07 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2011-Dec-16 03:32:07 LOG4 from_mock: From MOCK: confok 2011-Dec-16 03:32:07 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group 1' with status 'OK' 2011-Dec-16 03:32:07 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2011-Dec-16 03:32:07 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group 1' 2011-Dec-16 03:32:07 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group 2' using string 'conf' 2011-Dec-16 03:32:07 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2011-Dec-16 03:32:07 START begin_task: Starting task 'waiting on disable Mock spectrometer group 2' 2011-Dec-16 03:32:07 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2011-Dec-16 03:32:07 LOG4 from_mock: From MOCK: confok 2011-Dec-16 03:32:07 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group 2' with status 'OK' 2011-Dec-16 03:32:07 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2011-Dec-16 03:32:07 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group 2' 2011-Dec-16 03:32:07 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2011-Dec-16 03:32:07 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2011-Dec-16 03:32:07 DONE finish_task: DONE finished configuring: the Mock spectrometer 2011-Dec-16 03:32:07 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-16 03:32:07 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2011-Dec-16 03:32:07 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2011-Dec-16 03:32:07 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2011-Dec-16 03:32:07 COMMAND run_command_line: EXECUTING command 5: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2011-Dec-16 03:32:07 COMMAND run_command_line: EXECUTING command 6: 'CATALOG AGESFull.cat' 2011-Dec-16 03:32:07 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2011-Dec-16 03:32:07 COMMAND run_command_line: EXECUTING command 9: 'IF LSTSLEW(AGES3193_p3_157) < 085640 THEN' 2011-Dec-16 03:32:08 LOG3 is_if_valid: Current source data: up 261.7 16.6 UP - - 153 2.3 2011-Dec-16 03:32:08 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_157) < 085640 2011-Dec-16 03:32:08 INFO5 is_if_valid: Condition parsed as: 8.7632683333333343 < 8.9444444444444446 2011-Dec-16 03:32:08 COMMAND run_command_line: EXECUTING command 10: 'FIXEDDRIFT az=261.04 alfaangle=-65.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_157 ra=95300.00 dec=195900.00' 2011-Dec-16 03:32:08 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-16 03:32:08 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-16 03:32:09 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 261.04 -65.9 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_157 95300.00 195900.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-16 03:32:09 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-16 03:32:09 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2011-Dec-16 03:32:09 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'Cur-pos' 2011-Dec-16 03:32:09 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-16 03:32:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_157} 2011-Dec-16 03:32:09 INFO3 fixed_driftmap: Sending telescope to Az = 261.04 and ZA = 13.55 2011-Dec-16 03:32:09 LOG3 track_source: Calling 'track_source AGES3193_p3_157 261.04 13.5547149337 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-16 03:32:09 START begin_task: Starting task 'sending tracking commands' 2011-Dec-16 03:32:09 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2011-Dec-16 03:32:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_157} INFO {Slewing to source 'AGES3193_p3_157' ...} 2011-Dec-16 03:32:09 INFO1 track_source: Starting to track AGES3193_p3_157 2011-Dec-16 03:32:09 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_157" 2011-Dec-16 03:32:09 LOG3 vw_send: To DATATAKING: set ra 261.04 2011-Dec-16 03:32:09 LOG3 vw_send: To DATATAKING: set dec 13.5547149337 2011-Dec-16 03:32:09 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-16 03:32:09 LOG3 vw_send: To DATATAKING: pnt tr 261.04 13.5547149337 -CF 2011-Dec-16 03:32:09 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 03:32:09 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-16 03:32:09 LOG5 finish_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2011-Dec-16 03:32:09 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-16 03:32:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 03:32:09 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-16 03:32:09 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2011-Dec-16 03:32:09 START begin_task: Starting task 'rotate ALFA to -65.9 degrees' 2011-Dec-16 03:32:09 LOG5 begin_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2011-Dec-16 03:32:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -65.9 degrees ...} 2011-Dec-16 03:32:09 INFO2 rotate_alfa: ALFA commanded to -65.9 degrees 2011-Dec-16 03:32:09 LOG3 sock_errsend: To ALFAMOTOR: POSITION -65.9 REPLY 2011-Dec-16 03:32:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-16 03:32:09 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-16 03:32:09 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2011-Dec-16 03:32:09 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_157" 2011-Dec-16 03:32:09 LOG4 got_cormsg: From DATATAKING: set ra 261.04 2011-Dec-16 03:32:09 LOG4 got_cormsg: From DATATAKING: set dec 13.5547149337 2011-Dec-16 03:32:09 LOG4 got_cormsg: From DATATAKING: vw% 261.04 2011-Dec-16 03:32:09 LOG4 got_cormsg: From DATATAKING: vw% 13.5547149337 2011-Dec-16 03:32:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:32:09 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-16 03:32:09 LOG4 got_cormsg: From DATATAKING: pnt tr 261.04 13.5547149337 -CF 2011-Dec-16 03:32:09 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 03:32:09 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-16 03:32:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:32:24 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 03:32:24.301 (seconds: 12744.301)!} 2011-Dec-16 03:32:24 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 03:32:24.301 (seconds: 12744.301)! 2011-Dec-16 03:32:57 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-16 03:32:57 INFO3 alfa_motor: ALFA rotator in-position -65.90 degrees 2011-Dec-16 03:32:57 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-16 03:32:57 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2011-Dec-16 03:32:57 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-16 03:32:57 STOP finish_task: Finishing task 'rotate ALFA to -65.9 degrees' 2011-Dec-16 03:32:57 LOG5 finish_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2011-Dec-16 03:32:57 INFO2 finish_task: DONE finished configuration: rotating ALFA to -65.9 degrees 2011-Dec-16 03:32:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 03:32:57 STOP end_task: Finishing task 'rotate ALFA to -65.9 degrees' with status 'OK' 2011-Dec-16 03:32:57 LOG5 end_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2011-Dec-16 03:32:57 START begin_task: Starting task 'waiting on telescope' 2011-Dec-16 03:32:57 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2011-Dec-16 03:32:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-16 03:32:57 LOG3 waittrk: Start waittrk 5 2011-Dec-16 03:32:57 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-16 03:32:57 LOG5 begin_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2011-Dec-16 03:33:02 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-16 03:33:02 LOG5 end_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2011-Dec-16 03:33:02 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-16 03:33:02 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2011-Dec-16 03:33:23 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-16 03:33:23 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2011-Dec-16 03:33:24 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-16 03:33:24 INFO2 waittrk: Now tracking AGES3193_p3_157 2011-Dec-16 03:33:24 LOG4 waittrk: Current telescope position: Az = 260.60 ZA = 13.56 2011-Dec-16 03:33:24 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-16 03:33:24 LOG5 finish_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2011-Dec-16 03:33:24 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-16 03:33:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 03:33:24 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-16 03:33:24 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2011-Dec-16 03:33:24 START begin_task: Starting task 'selecting calibration type' 2011-Dec-16 03:33:24 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2011-Dec-16 03:33:24 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-16 03:33:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-16 03:33:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 03:33:24 START begin_task: Starting task 'waiting on setcal' 2011-Dec-16 03:33:24 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2011-Dec-16 03:33:24 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-16 03:33:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 03:33:24 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:33:24 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-16 03:33:24 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-16 03:33:24 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2011-Dec-16 03:33:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-16 03:33:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-16 03:33:24 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-16 03:33:24 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-16 03:33:24 LOG5 begin_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2011-Dec-16 03:33:24 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-16 03:33:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-16 03:33:24 LOG5 end_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2011-Dec-16 03:33:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-16 03:33:24 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-16 03:33:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-16 03:33:24 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-16 03:33:24 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-16 03:33:24 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2011-Dec-16 03:33:24 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:33:24 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-16 03:33:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-16 03:33:24 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2011-Dec-16 03:33:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-16 03:33:24 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-16 03:33:24 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-16 03:33:24 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2011-Dec-16 03:33:24 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Dec-16 03:33:24 INFO2 astwait: Waiting for 651 seconds from 07:33:24 to 07:44:15 UTC ... 2011-Dec-16 03:33:24 LOG4 send_obs_status: To obs_status: <1> TASKTIME 651 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-16 03:33:24 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Dec-16 03:33:24 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2011-Dec-16 03:44:15 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Dec-16 03:44:15 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2011-Dec-16 03:44:15 INFO3 astwait: Finished waiting 2011-Dec-16 03:44:15 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-16 03:44:15 LOG5 dopset_later: Calling 'dopset_later 61.193794090692045' 2011-Dec-16 03:44:15 INFO3 dopset_later: Setting Doppler correction for 03:45:15 (61.2 seconds from now) 2011-Dec-16 03:44:15 LOG5 antvel: Calling 'antvel 261.040000 13.554715 F Heliocentric 61.193794090692045' 2011-Dec-16 03:44:15 LOG2 antvel: Transforming current Az = 261.04 ZA = 13.55 to apparent RA = 09:53:41.4 Dec = +19:55:23.2 2011-Dec-16 03:44:15 LOG2 antvel: Parameters to Doppler: Heliocentric 27915 2011 350 0.0 2011-Dec-16 03:44:15 INFO5 antvel: Computed antenna velocity: -25.98412 km/s 2011-Dec-16 03:44:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-25.984122109000001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-16 03:44:15 INFO4 dopset_gen: New sky frequencies: 1381.363156 1381.363156 1381.363156 1381.363156 1381.363156 1381.363156 1381.363156 1381.363156 1381.363156 2011-Dec-16 03:44:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.363156 sky0=1381.363156 sky1=1381.363156 sky2=1381.363156 sky3=1381.363156 sky4=1381.363156 sky5=1381.363156 sky6=1381.363156 sky7=1381.363156 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-16 03:44:15 LOG2 dopset_gen: Result from 'sky2syn': 1631.363156 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-16 03:44:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631363156.0} 2011-Dec-16 03:44:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 03:44:15 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-16 03:44:15 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-16 03:44:15 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.3 Dec = +19:58:46.7 2011-Dec-16 03:44:15 LOG3 track_source: Calling 'track_source AGES3193_p3_157 095203.3 195846.7 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-16 03:44:15 START begin_task: Starting task 'sending tracking commands' 2011-Dec-16 03:44:15 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2011-Dec-16 03:44:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_157} INFO {Slewing to source 'AGES3193_p3_157' ...} 2011-Dec-16 03:44:15 INFO1 track_source: Starting to track AGES3193_p3_157 2011-Dec-16 03:44:15 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_157" 2011-Dec-16 03:44:15 LOG3 vw_send: To DATATAKING: set ra 095203.3 2011-Dec-16 03:44:15 LOG3 vw_send: To DATATAKING: set dec 195846.7 2011-Dec-16 03:44:15 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-16 03:44:15 LOG3 vw_send: To DATATAKING: pnt tr 095203.3 195846.7 -CJ 2011-Dec-16 03:44:15 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 03:44:15 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-16 03:44:15 LOG5 finish_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2011-Dec-16 03:44:15 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-16 03:44:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 03:44:15 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-16 03:44:15 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2011-Dec-16 03:44:15 START begin_task: Starting task 'waiting on telescope' 2011-Dec-16 03:44:15 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2011-Dec-16 03:44:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-16 03:44:15 LOG3 waittrk: Start waittrk 5 2011-Dec-16 03:44:15 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-16 03:44:15 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2011-Dec-16 03:44:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631363156.0} 2011-Dec-16 03:44:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 03:44:15 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_157" 2011-Dec-16 03:44:15 LOG4 got_cormsg: From DATATAKING: set ra 095203.3 2011-Dec-16 03:44:15 LOG4 got_cormsg: From DATATAKING: set dec 195846.7 2011-Dec-16 03:44:15 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-16 03:44:15 LOG4 got_cormsg: From DATATAKING: vw% 095203.3 2011-Dec-16 03:44:15 LOG4 got_cormsg: From DATATAKING: vw% 195846.7 2011-Dec-16 03:44:15 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:44:15 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-16 03:44:15 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.3 195846.7 -CJ 2011-Dec-16 03:44:15 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 03:44:15 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-16 03:44:15 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:44:20 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-16 03:44:20 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2011-Dec-16 03:44:20 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-16 03:44:20 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2011-Dec-16 03:44:22 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-16 03:44:22 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2011-Dec-16 03:44:22 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-16 03:44:22 INFO2 waittrk: Now tracking AGES3193_p3_157 2011-Dec-16 03:44:22 LOG4 waittrk: Current telescope position: Az = 260.60 ZA = 13.54 2011-Dec-16 03:44:22 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-16 03:44:22 LOG5 finish_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2011-Dec-16 03:44:22 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-16 03:44:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 03:44:22 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-16 03:44:22 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2011-Dec-16 03:44:22 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-16 03:44:22 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2011-Dec-16 03:44:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-16 03:44:22 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-16 03:44:22 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-16 03:44:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-16 03:44:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 03:44:22 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-16 03:44:22 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2011-Dec-16 03:44:22 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-16 03:44:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 03:44:26 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:44:26 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-16 03:44:26 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-16 03:44:26 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2011-Dec-16 03:44:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-16 03:44:26 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-16 03:44:26 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2011-Dec-16 03:44:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-16 03:44:26 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-16 03:44:26 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-16 03:44:26 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-16 03:44:26 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-16 03:44:26 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-16 03:44:26 LOG5 begin_task: Level: (5) ID = <10040> Status = 0 0 0 0 ok 2011-Dec-16 03:44:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-16 03:44:26 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:44:26 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 8 6 dB 2011-Dec-16 03:44:26 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2011-Dec-16 03:44:26 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 3 dB 2011-Dec-16 03:44:26 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 2 dB 2011-Dec-16 03:44:26 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-16 03:44:26 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-16 03:44:26 LOG5 end_task: Level: (5) ID = <10040> Status = 0 0 0 0 ok 2011-Dec-16 03:44:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.898 1.053 ALFA beam 1: 0.922 0.913 2011-Dec-16 03:44:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.917 0.971 ALFA beam 3: 1.044 1.109 2011-Dec-16 03:44:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.820 1.103 ALFA beam 5: 0.966 1.114 2011-Dec-16 03:44:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.905 0.014 ALFA beam 7: 0.987 0.014 2011-Dec-16 03:44:26 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-16 03:44:26 LOG5 finish_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2011-Dec-16 03:44:26 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-16 03:44:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 03:44:27 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-16 03:44:27 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2011-Dec-16 03:44:27 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-16 03:44:27 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2011-Dec-16 03:44:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-16 03:44:27 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-16 03:44:27 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-16 03:44:27 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-16 03:44:27 LOG5 begin_task: Level: (5) ID = <10042> Status = 0 0 0 0 ok 2011-Dec-16 03:44:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 03:44:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.898 1.053 0.922 0.913 2011-Dec-16 03:44:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.917 0.971 1.044 1.109 2011-Dec-16 03:44:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.820 1.103 0.966 1.114 2011-Dec-16 03:44:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.905 0.014 0.987 0.014 2011-Dec-16 03:44:32 INFO3 from_mock: From MOCK: b0s0g0 rms:A 32.0 28.1 B 30.0 30.0 mn:A 0.0 0.0 B -0.4 -0.4 gn: 11 11 2011-Dec-16 03:44:32 INFO3 from_mock: From MOCK: b0s1g0 rms:A 32.5 31.2 B 28.2 29.8 mn:A 0.2 -0.4 B -0.5 0.2 gn: 12 11 2011-Dec-16 03:44:32 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.9 28.9 B 32.8 28.8 mn:A 0.7 0.7 B 0.1 -0.1 gn: 7 11 2011-Dec-16 03:44:32 INFO3 from_mock: From MOCK: b1s1g0 rms:A 30.4 28.0 B 31.3 31.3 mn:A -0.4 -0.3 B 0.5 0.2 gn: 8 10 2011-Dec-16 03:44:32 INFO3 from_mock: From MOCK: b2s0g0 rms:A 28.8 27.9 B 27.9 29.1 mn:A 0.1 -0.3 B 0.3 -0.1 gn: 10 11 2011-Dec-16 03:44:32 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.6 29.9 B 32.5 30.2 mn:A 0.2 -0.3 B 0.1 0.2 gn: 11 12 2011-Dec-16 03:44:32 INFO3 from_mock: From MOCK: b3s0g0 rms:A 28.9 28.7 B 31.0 27.7 mn:A 0.5 -0.2 B -0.0 -0.3 gn: 12 12 2011-Dec-16 03:44:32 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.6 29.9 B 30.1 31.3 mn:A -0.3 0.3 B 0.2 0.1 gn: 12 12 2011-Dec-16 03:44:32 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.1 29.2 B 31.6 31.7 mn:A -0.3 -0.4 B -0.4 0.0 gn: 13 12 2011-Dec-16 03:44:32 INFO3 from_mock: From MOCK: b4s1g0 rms:A 32.6 29.5 B 30.7 29.6 mn:A -0.0 -0.1 B -0.4 0.1 gn: 16 13 2011-Dec-16 03:44:32 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.7 28.6 B 31.0 30.9 mn:A 0.4 0.4 B -0.1 0.5 gn: 12 11 2011-Dec-16 03:44:32 INFO3 from_mock: From MOCK: b5s1g0 rms:A 31.0 30.8 B 31.9 31.6 mn:A -0.4 0.3 B -0.1 0.1 gn: 12 11 2011-Dec-16 03:44:32 INFO3 from_mock: From MOCK: b6s0g0 rms:A 29.6 27.2 B 14.3 14.7 mn:A -0.5 0.2 B 0.4 -0.5 gn: 12 31 2011-Dec-16 03:44:32 INFO3 from_mock: From MOCK: b6s1g0 rms:A 32.8 29.8 B 11.3 11.0 mn:A 0.6 0.5 B 0.1 0.1 gn: 13 31 2011-Dec-16 03:44:32 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-16 03:44:32 LOG5 end_task: Level: (5) ID = <10042> Status = 0 0 0 0 ok 2011-Dec-16 03:44:32 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-16 03:44:32 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-16 03:44:32 LOG5 finish_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2011-Dec-16 03:44:32 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-16 03:44:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 03:44:32 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-16 03:44:32 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2011-Dec-16 03:44:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-16 03:44:33 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-16 03:44:33 LOG5 finish_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2011-Dec-16 03:44:33 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-16 03:44:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 03:44:33 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-16 03:44:33 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2011-Dec-16 03:44:33 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2011-Dec-16 03:44:33 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2011-Dec-16 03:44:33 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2011-Dec-16 03:44:33 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2011-Dec-16 03:44:33 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20111216.a2048.0000.fits' is empty! 2011-Dec-16 03:44:33 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-16 03:44:33 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-16 03:44:33 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2011-Dec-16 03:44:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-16 03:44:33 START begin_task: Starting task 'selecting calibration type' 2011-Dec-16 03:44:33 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2011-Dec-16 03:44:33 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-16 03:44:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-16 03:44:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 03:44:33 START begin_task: Starting task 'waiting on setcal' 2011-Dec-16 03:44:33 LOG5 begin_task: Level: (5) ID = <10045> Status = 0 0 0 0 ok 2011-Dec-16 03:44:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2011-Dec-16 03:44:33 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-16 03:44:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 03:44:33 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:44:33 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-16 03:44:33 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-16 03:44:33 LOG5 end_task: Level: (5) ID = <10045> Status = 0 0 0 0 ok 2011-Dec-16 03:44:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-16 03:44:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-16 03:44:33 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-16 03:44:33 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-16 03:44:33 LOG5 begin_task: Level: (5) ID = <10046> Status = 0 0 0 0 ok 2011-Dec-16 03:44:33 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:44:33 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-16 03:44:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-16 03:44:33 LOG5 end_task: Level: (5) ID = <10046> Status = 0 0 0 0 ok 2011-Dec-16 03:44:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-16 03:44:33 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-16 03:44:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-16 03:44:33 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-16 03:44:33 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-16 03:44:33 LOG5 begin_task: Level: (5) ID = <10047> Status = 0 0 0 0 ok 2011-Dec-16 03:44:33 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-16 03:44:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-16 03:44:33 LOG5 end_task: Level: (5) ID = <10047> Status = 0 0 0 0 ok 2011-Dec-16 03:44:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-16 03:44:33 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-16 03:44:33 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-16 03:44:33 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2011-Dec-16 03:44:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-16 03:44:33 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-16 03:44:33 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-16 03:44:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-16 03:44:33 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2011-Dec-16 03:44:33 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-16 03:44:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-16 03:44:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-16 03:44:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-16 03:44:33 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2011-Dec-16 03:44:33 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-16 03:44:33 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-16 03:44:33 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2011-Dec-16 03:44:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-16 03:44:33 LOG5 log_alfabeam: Parameters: 9.867583333333334 19.979638888888889 8.932725 2011.9586747091032 -65.900002 2011-Dec-16 03:44:33 LOG4 log_alfabeam: ALFABEAM 0 9.867583333333332 19.979638888888903 2011-Dec-16 03:44:33 LOG4 log_alfabeam: ALFABEAM 1 9.868825796332523 19.889713794311401 2011-Dec-16 03:44:33 LOG4 log_alfabeam: ALFABEAM 2 9.874667543337342 19.949498530319254 2011-Dec-16 03:44:33 LOG4 log_alfabeam: ALFABEAM 3 9.873399999882421 20.039933665668286 2011-Dec-16 03:44:33 LOG4 log_alfabeam: ALFABEAM 4 9.866297674141087 20.069371798902726 2011-Dec-16 03:44:33 LOG4 log_alfabeam: ALFABEAM 5 9.860492112302810 20.009181013096413 2011-Dec-16 03:44:33 LOG4 log_alfabeam: ALFABEAM 6 9.861752699370607 19.919957347033399 2011-Dec-16 03:44:33 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-16 03:44:33 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-16 03:44:33 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-16 03:44:33 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_157 2011-Dec-16 03:44:33 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-16 03:44:33 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-16 03:44:34 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-16 03:44:34 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-16 03:44:34 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-16 03:44:34 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-16 03:44:34 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-16 03:44:34 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-16 03:44:34 LOG3 take_mock_data: PSET configuration: patternid=135000001 2011-Dec-16 03:44:34 LOG3 take_mock_data: PSET configuration: scanid=135000001 2011-Dec-16 03:44:34 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-16 03:44:34 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-16 03:44:34 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-16 03:44:34 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456363156.0 2011-Dec-16 03:44:34 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306363156.0 2011-Dec-16 03:44:34 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-16 03:44:34 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-16 03:44:34 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_157:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=135000001:scanid=135000001:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456363156.0:topobfreqhz=1306363156.0:filetype=1 2011-Dec-16 03:44:34 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-16 03:44:34 LOG5 begin_task: Level: (5) ID = <10050> Status = 0 0 0 0 ok 2011-Dec-16 03:44:34 LOG4 from_mock: From MOCK: psetok 2011-Dec-16 03:44:34 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-16 03:44:34 LOG5 end_task: Level: (5) ID = <10050> Status = 0 0 0 0 ok 2011-Dec-16 03:44:34 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-16 03:44:34 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-16 03:44:34 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-16 03:44:34 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-16 03:44:34 LOG5 begin_task: Level: (5) ID = <10051> Status = 0 0 0 0 ok 2011-Dec-16 03:44:34 LOG4 from_mock: From MOCK: starok 2011-Dec-16 03:44:34 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-16 03:44:34 LOG5 end_task: Level: (5) ID = <10051> Status = 0 0 0 0 ok 2011-Dec-16 03:44:34 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-16 03:44:34 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135000001 2011-Dec-16 03:44:34 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-16 03:44:34 LOG5 begin_task: Level: (5) ID = <10052> Status = 0 0 0 0 ok 2011-Dec-16 03:44:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 03:44:34 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-16 03:44:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-16 03:44:34 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-16 03:44:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27875.00 2011-Dec-16 03:44:36 INFO2 got_mock_message: Mock spectrometer start file number is 00000 2011-Dec-16 03:44:36 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-16 03:44:36 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-16 03:44:36 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-16 03:44:36 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-16 03:44:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-16 03:44:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-16 03:44:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-16 03:44:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-16 03:44:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-16 03:44:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-16 03:44:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-16 03:44:36 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-16 03:44:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 03:44:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 03:44:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 03:44:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 03:44:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 03:44:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 03:44:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 03:44:39 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:44:39.01 2011-Dec-16 03:44:39 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324021479.01 Fri Dec 16 03:44:39 2011 2011-Dec-16 03:44:39 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-16 03:44:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.363156 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 03:44:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.363156 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 03:44:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.363156 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 03:44:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.363156 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 03:44:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.363156 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 03:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:44:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.363156 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 03:44:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.363156 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 03:44:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.363156 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 03:44:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.363156 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 03:44:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 03:44:45 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-16 03:44:45 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-16 03:44:45 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-16 03:44:45 LOG5 end_task: Level: (5) ID = <10052> Status = 0 0 0 0 ok 2011-Dec-16 03:44:45 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-16 03:44:45 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2011-Dec-16 03:44:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-16 03:44:45 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-16 03:44:45 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-16 03:44:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-16 03:44:45 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2011-Dec-16 03:44:45 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-16 03:44:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-16 03:44:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-16 03:44:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-16 03:44:45 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2011-Dec-16 03:44:45 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-16 03:44:45 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-16 03:44:45 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2011-Dec-16 03:44:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-16 03:44:45 LOG5 log_alfabeam: Parameters: 9.867583333333334 19.979638888888889 8.935789 2011.9586750576723 -65.900002 2011-Dec-16 03:44:45 LOG4 log_alfabeam: ALFABEAM 0 9.867583333333332 19.979638888888893 2011-Dec-16 03:44:45 LOG4 log_alfabeam: ALFABEAM 1 9.868828981673696 19.889722436360532 2011-Dec-16 03:44:45 LOG4 log_alfabeam: ALFABEAM 2 9.874668627577149 19.949548633568739 2011-Dec-16 03:44:45 LOG4 log_alfabeam: ALFABEAM 3 9.873397784449152 20.039976612556391 2011-Dec-16 03:44:45 LOG4 log_alfabeam: ALFABEAM 4 9.866294353314709 20.069362212635799 2011-Dec-16 03:44:45 LOG4 log_alfabeam: ALFABEAM 5 9.860491037293693 20.009129080827392 2011-Dec-16 03:44:45 LOG4 log_alfabeam: ALFABEAM 6 9.861754831224845 19.919916480363550 2011-Dec-16 03:44:45 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-16 03:44:45 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-16 03:44:45 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-16 03:44:45 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_157 2011-Dec-16 03:44:45 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-16 03:44:45 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-16 03:44:45 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-16 03:44:45 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-16 03:44:45 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-16 03:44:45 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-16 03:44:45 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-16 03:44:45 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-16 03:44:45 LOG3 take_mock_data: PSET configuration: patternid=135000001 2011-Dec-16 03:44:45 LOG3 take_mock_data: PSET configuration: scanid=135000002 2011-Dec-16 03:44:45 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-16 03:44:45 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-16 03:44:45 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-16 03:44:45 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456363156.0 2011-Dec-16 03:44:45 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306363156.0 2011-Dec-16 03:44:45 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-16 03:44:45 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-16 03:44:45 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_157:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=135000001:scanid=135000002:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456363156.0:topobfreqhz=1306363156.0:filetype=1 2011-Dec-16 03:44:45 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-16 03:44:45 LOG5 begin_task: Level: (5) ID = <10055> Status = 0 0 0 0 ok 2011-Dec-16 03:44:45 LOG4 from_mock: From MOCK: psetok 2011-Dec-16 03:44:45 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-16 03:44:45 LOG5 end_task: Level: (5) ID = <10055> Status = 0 0 0 0 ok 2011-Dec-16 03:44:45 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-16 03:44:45 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-16 03:44:45 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-16 03:44:45 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-16 03:44:45 LOG5 begin_task: Level: (5) ID = <10056> Status = 0 0 0 0 ok 2011-Dec-16 03:44:45 LOG4 from_mock: From MOCK: starok 2011-Dec-16 03:44:45 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-16 03:44:45 LOG5 end_task: Level: (5) ID = <10056> Status = 0 0 0 0 ok 2011-Dec-16 03:44:45 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-16 03:44:45 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135000002 2011-Dec-16 03:44:45 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-16 03:44:45 LOG5 begin_task: Level: (5) ID = <10057> Status = 0 0 0 0 ok 2011-Dec-16 03:44:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 03:44:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-16 03:44:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27886.00 2011-Dec-16 03:44:46 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-16 03:44:46 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-16 03:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.536 (still bad) 2011-Dec-16 03:44:48 INFO2 got_mock_message: Mock spectrometer start file number is 00100 2011-Dec-16 03:44:48 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-16 03:44:48 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-16 03:44:48 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-16 03:44:48 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-16 03:44:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-16 03:44:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-16 03:44:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-16 03:44:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-16 03:44:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-16 03:44:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-16 03:44:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-16 03:44:48 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-16 03:44:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 03:44:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 03:44:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 03:44:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 03:44:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 03:44:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 03:44:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 03:44:51 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:44:51.01 2011-Dec-16 03:44:51 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324021491.01 Fri Dec 16 03:44:51 2011 2011-Dec-16 03:44:51 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-16 03:44:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.363156 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 03:44:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.363156 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 03:44:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.363156 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 03:44:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.363156 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 03:44:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.363156 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 03:44:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.363156 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 03:44:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.363156 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 03:44:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.363156 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 03:44:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.363156 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 03:44:51 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-16 03:44:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 03:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 03:44:57 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-16 03:44:57 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-16 03:44:57 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-16 03:44:57 LOG5 end_task: Level: (5) ID = <10057> Status = 0 0 0 0 ok 2011-Dec-16 03:44:57 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-16 03:44:57 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2011-Dec-16 03:44:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-16 03:44:57 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-16 03:44:57 LOG5 finish_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2011-Dec-16 03:44:57 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-16 03:44:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 03:44:57 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-16 03:44:57 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2011-Dec-16 03:44:57 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-16 03:44:57 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 261.04 and ZA = 13.55 2011-Dec-16 03:44:57 LOG3 track_source: Calling 'track_source AGES3193_p3_157 261.04 13.5547149337 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-16 03:44:57 START begin_task: Starting task 'sending tracking commands' 2011-Dec-16 03:44:57 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2011-Dec-16 03:44:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_157} INFO {Slewing to source 'AGES3193_p3_157' ...} 2011-Dec-16 03:44:57 INFO1 track_source: Starting to track AGES3193_p3_157 2011-Dec-16 03:44:57 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_157" 2011-Dec-16 03:44:57 LOG3 vw_send: To DATATAKING: set ra 261.04 2011-Dec-16 03:44:57 LOG3 vw_send: To DATATAKING: set dec 13.5547149337 2011-Dec-16 03:44:57 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-16 03:44:57 LOG3 vw_send: To DATATAKING: pnt tr 261.04 13.5547149337 -CF 2011-Dec-16 03:44:57 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 03:44:57 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-16 03:44:57 LOG5 finish_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2011-Dec-16 03:44:57 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-16 03:44:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 03:44:57 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-16 03:44:57 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2011-Dec-16 03:44:57 LOG1 fixed_driftmap: Parameters: HA = -00:57:01.4 Start = 08:56:40.1 LST = 08:56:20.9 diff = 19.2 secs 2011-Dec-16 03:44:57 INFO2 fixed_driftmap: Waiting 17.2 seconds for RA 9:53:42 2011-Dec-16 03:44:57 INFO2 lstwait: Waiting for 17.2 secs from LST 08:56:21 to LST 08:56:38 ... 2011-Dec-16 03:44:57 LOG4 send_obs_status: To obs_status: <1> TASKTIME 17.201439679814971 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-16 03:44:57 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-16 03:44:57 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2011-Dec-16 03:44:57 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_157" 2011-Dec-16 03:44:57 LOG4 got_cormsg: From DATATAKING: set ra 261.04 2011-Dec-16 03:44:57 LOG4 got_cormsg: From DATATAKING: set dec 13.5547149337 2011-Dec-16 03:44:57 LOG4 got_cormsg: From DATATAKING: vw% 261.04 2011-Dec-16 03:44:57 LOG4 got_cormsg: From DATATAKING: vw% 13.5547149337 2011-Dec-16 03:44:57 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:44:57 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-16 03:44:57 LOG4 got_cormsg: From DATATAKING: pnt tr 261.04 13.5547149337 -CF 2011-Dec-16 03:44:57 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 03:44:57 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-16 03:44:57 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 03:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 03:45:14 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-16 03:45:14 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2011-Dec-16 03:45:14 LOG4 lstwait: Finished waiting 0.80 seconds late 2011-Dec-16 03:45:14 INFO3 lstwait: Finished waiting 2011-Dec-16 03:45:14 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-16 03:45:14 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-16 03:45:14 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-16 03:45:14 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-16 03:45:14 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-16 03:45:14 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-16 03:45:14 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2011-Dec-16 03:45:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-16 03:45:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-16 03:45:14 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-16 03:45:14 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-16 03:45:14 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-16 03:45:14 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_157 2011-Dec-16 03:45:14 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-16 03:45:14 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-16 03:45:14 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-16 03:45:14 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-16 03:45:14 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-16 03:45:14 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-16 03:45:14 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-16 03:45:14 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-16 03:45:14 LOG3 take_mock_data: PSET configuration: patternid=135000003 2011-Dec-16 03:45:14 LOG3 take_mock_data: PSET configuration: scanid=135000003 2011-Dec-16 03:45:14 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-16 03:45:14 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-16 03:45:14 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-16 03:45:14 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456363156.0 2011-Dec-16 03:45:14 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306363156.0 2011-Dec-16 03:45:14 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-16 03:45:14 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-16 03:45:14 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_157:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=135000003:scanid=135000003:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456363156.0:topobfreqhz=1306363156.0:filetype=1 2011-Dec-16 03:45:14 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-16 03:45:14 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2011-Dec-16 03:45:15 LOG4 from_mock: From MOCK: psetok 2011-Dec-16 03:45:15 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-16 03:45:15 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2011-Dec-16 03:45:15 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-16 03:45:15 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-16 03:45:15 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-16 03:45:15 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-16 03:45:15 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2011-Dec-16 03:45:15 LOG4 from_mock: From MOCK: starok 2011-Dec-16 03:45:15 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-16 03:45:15 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2011-Dec-16 03:45:15 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-16 03:45:15 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 135000003 2011-Dec-16 03:45:15 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-16 03:45:15 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2011-Dec-16 03:45:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 03:45:15 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-16 03:45:15 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-16 03:45:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-16 03:45:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27916.00 2011-Dec-16 03:45:17 INFO2 got_mock_message: Mock spectrometer start file number is 00200 2011-Dec-16 03:45:17 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-16 03:45:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.363156 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 03:45:17 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2011-Dec-16 03:45:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.363156 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 03:45:17 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-16 03:45:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.363156 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 03:45:17 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-16 03:45:17 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-16 03:45:17 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-16 03:45:17 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-16 03:45:17 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-16 03:45:17 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-16 03:45:17 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-16 03:45:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.363156 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 03:45:17 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-16 03:45:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.363156 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 03:45:17 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-16 03:45:17 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 03:45:17 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 03:45:17 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 03:45:17 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 03:45:17 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 03:45:17 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 03:45:17 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 03:45:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.363156 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 03:45:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.363156 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 03:45:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.363156 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 03:45:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.363156 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 03:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 03:45:20 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:45:20.01 2011-Dec-16 03:45:20 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324021520.01 Fri Dec 16 03:45:20 2011 2011-Dec-16 03:45:20 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-16 03:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 03:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 03:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 03:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 03:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 03:45:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 03:45:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.899 1.049 0.923 0.911 2011-Dec-16 03:45:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.919 0.970 1.040 1.108 2011-Dec-16 03:45:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.817 1.101 0.970 1.115 2011-Dec-16 03:45:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.905 0.014 0.987 0.014 2011-Dec-16 03:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 03:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 03:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-16 03:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 03:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 03:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:46:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 03:46:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.899 1.049 0.923 0.910 2011-Dec-16 03:46:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 0.968 1.042 1.107 2011-Dec-16 03:46:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.817 1.100 0.965 1.113 2011-Dec-16 03:46:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.904 0.014 0.987 0.014 2011-Dec-16 03:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 03:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 03:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 03:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:47:23 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 03:47:23.295 (seconds: 13643.295)!} 2011-Dec-16 03:47:23 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 03:47:23.295 (seconds: 13643.295)! 2011-Dec-16 03:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:47:24 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 13642.0 to 13643.0! 2011-Dec-16 03:47:25 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (13642.0 - 13644.0)! 2011-Dec-16 03:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:47:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 03:47:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.900 1.052 0.923 0.912 2011-Dec-16 03:47:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 0.969 1.040 1.106 2011-Dec-16 03:47:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.817 1.099 0.968 1.113 2011-Dec-16 03:47:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.904 0.014 0.987 0.014 2011-Dec-16 03:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 03:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 03:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 03:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 03:48:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 03:48:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.902 1.058 0.922 0.909 2011-Dec-16 03:48:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.922 0.972 1.055 1.121 2011-Dec-16 03:48:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.815 1.099 0.968 1.114 2011-Dec-16 03:48:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.904 0.014 0.988 0.014 2011-Dec-16 03:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 03:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 03:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 03:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 03:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 03:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 03:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 03:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 03:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 03:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 03:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 03:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 03:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 03:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 03:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 03:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 03:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 03:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 03:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:49:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 03:49:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.901 1.054 0.922 0.912 2011-Dec-16 03:49:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.919 0.968 1.042 1.108 2011-Dec-16 03:49:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.817 1.100 0.969 1.116 2011-Dec-16 03:49:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.908 0.014 0.990 0.014 2011-Dec-16 03:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 03:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 03:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:50:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 03:50:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.086 0.923 0.911 2011-Dec-16 03:50:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 0.966 1.042 1.105 2011-Dec-16 03:50:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.816 1.100 0.969 1.113 2011-Dec-16 03:50:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.909 0.014 0.993 0.014 2011-Dec-16 03:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 03:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 03:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 03:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-16 03:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-16 03:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-16 03:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 03:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-16 03:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 03:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-16 03:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 03:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 03:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 03:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 03:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 03:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 03:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 03:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:51:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 03:51:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.898 1.047 0.923 0.912 2011-Dec-16 03:51:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.920 0.968 1.043 1.107 2011-Dec-16 03:51:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.816 1.097 0.969 1.115 2011-Dec-16 03:51:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.904 0.014 0.988 0.014 2011-Dec-16 03:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 03:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 03:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-16 03:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 03:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 03:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-16 03:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 03:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-16 03:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-16 03:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 03:52:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 03:52:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.899 1.048 0.924 0.912 2011-Dec-16 03:52:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.921 0.965 1.062 1.127 2011-Dec-16 03:52:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.816 1.099 0.965 1.112 2011-Dec-16 03:52:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.902 0.014 0.987 0.014 2011-Dec-16 03:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 03:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 03:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 03:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 03:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 03:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 03:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 03:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 03:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-16 03:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 03:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 03:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 03:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 03:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 03:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 03:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 03:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 03:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 03:53:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 03:53:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.896 1.049 0.924 0.913 2011-Dec-16 03:53:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 0.964 1.040 1.105 2011-Dec-16 03:53:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.815 1.099 0.969 1.118 2011-Dec-16 03:53:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.905 0.014 0.989 0.014 2011-Dec-16 03:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 03:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-16 03:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 03:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 03:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 03:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 03:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-16 03:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 03:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 03:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-16 03:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 03:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 03:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 03:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 03:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-16 03:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 03:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 03:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:54:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 03:54:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.900 1.052 0.941 0.928 2011-Dec-16 03:54:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 0.999 1.042 1.107 2011-Dec-16 03:54:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.815 1.099 0.967 1.114 2011-Dec-16 03:54:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.903 0.014 0.987 0.014 2011-Dec-16 03:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:54:50 WARNING WAPPDATA-search_pnt: WARNING extrapolating pnt-data from 55911.329722 to 55911.329734! 2011-Dec-16 03:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:54:51 WARNING WAPPDATA-search_pnt: WARNING interpolating pnt-data over 2.00 second time gap (55911.329722 - 55911.329745)! 2011-Dec-16 03:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 03:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 03:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 03:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:55:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 03:55:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.901 1.053 0.924 0.912 2011-Dec-16 03:55:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.920 0.962 1.041 1.105 2011-Dec-16 03:55:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.817 1.100 0.970 1.115 2011-Dec-16 03:55:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.014 1.036 0.014 2011-Dec-16 03:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 03:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 03:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 03:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 03:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-16 03:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-16 03:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-16 03:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-16 03:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 03:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 03:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 03:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 03:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 03:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 03:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 03:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 03:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 03:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 03:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 03:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:56:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 03:56:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.899 1.050 0.926 0.914 2011-Dec-16 03:56:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 0.963 1.041 1.106 2011-Dec-16 03:56:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.817 1.101 0.969 1.116 2011-Dec-16 03:56:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.906 0.014 0.989 0.014 2011-Dec-16 03:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 03:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 03:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 03:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 03:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:57:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 03:57:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.898 1.051 0.924 0.912 2011-Dec-16 03:57:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 0.966 1.040 1.108 2011-Dec-16 03:57:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.815 1.100 0.966 1.114 2011-Dec-16 03:57:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.904 0.014 0.989 0.014 2011-Dec-16 03:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 03:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:58:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 03:58:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.899 1.052 0.924 0.911 2011-Dec-16 03:58:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.917 0.964 1.042 1.106 2011-Dec-16 03:58:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.817 1.100 0.965 1.115 2011-Dec-16 03:58:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.905 0.014 0.987 0.014 2011-Dec-16 03:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 03:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 03:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:59:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 03:59:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.896 1.051 0.924 0.911 2011-Dec-16 03:59:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 0.963 1.043 1.106 2011-Dec-16 03:59:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.817 1.099 0.966 1.113 2011-Dec-16 03:59:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.904 0.014 0.988 0.014 2011-Dec-16 03:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 03:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 03:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 03:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 03:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 04:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 04:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 04:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 04:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 04:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 04:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 04:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 04:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 04:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 04:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 04:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 04:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 04:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 04:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 04:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 04:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 04:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 04:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 04:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 04:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 04:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 04:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 04:00:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:00:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.898 1.049 0.927 0.914 2011-Dec-16 04:00:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.922 0.965 1.045 1.108 2011-Dec-16 04:00:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.815 1.102 0.969 1.116 2011-Dec-16 04:00:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.903 0.014 0.988 0.014 2011-Dec-16 04:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 04:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 04:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 04:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 04:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 04:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 04:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 04:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 04:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 04:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 04:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 04:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 04:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 04:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 04:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 04:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 04:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 04:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 04:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 04:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 04:01:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:01:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.897 1.051 0.927 0.911 2011-Dec-16 04:01:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.920 0.962 1.045 1.108 2011-Dec-16 04:01:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.815 1.100 0.969 1.116 2011-Dec-16 04:01:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.904 0.014 0.989 0.014 2011-Dec-16 04:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 04:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 04:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 04:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 04:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 04:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 04:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 04:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 04:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 04:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 04:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 04:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 04:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 04:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 04:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 04:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 04:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 04:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 04:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 04:02:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:02:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.898 1.053 0.926 0.910 2011-Dec-16 04:02:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.920 0.965 1.042 1.107 2011-Dec-16 04:02:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.818 1.104 0.966 1.115 2011-Dec-16 04:02:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.904 0.014 0.989 0.014 2011-Dec-16 04:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 04:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 04:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 04:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 04:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 04:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 04:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 04:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 04:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 04:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 04:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 04:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 04:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 04:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 04:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 04:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 04:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 04:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 04:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 04:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 04:03:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:03:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.901 1.055 0.924 0.912 2011-Dec-16 04:03:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.922 0.965 1.045 1.109 2011-Dec-16 04:03:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.818 1.102 0.967 1.116 2011-Dec-16 04:03:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.909 0.014 0.994 0.014 2011-Dec-16 04:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 04:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 04:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 04:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 04:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 04:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 04:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 04:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 04:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 04:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 04:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 04:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 04:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 04:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 04:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 04:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 04:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 04:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 04:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 04:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 04:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 04:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 04:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 04:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 04:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 04:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 04:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 04:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 04:04:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:04:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.900 1.056 0.926 0.914 2011-Dec-16 04:04:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.922 0.968 1.043 1.109 2011-Dec-16 04:04:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.818 1.103 0.969 1.119 2011-Dec-16 04:04:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.907 0.014 0.991 0.014 2011-Dec-16 04:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 04:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 04:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 04:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 04:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 04:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 04:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 04:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 04:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 04:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 04:05:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 04:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 04:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 04:05:21 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-16 04:05:21 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-16 04:05:21 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-16 04:05:21 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2011-Dec-16 04:05:21 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-16 04:05:21 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2011-Dec-16 04:05:21 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-16 04:05:21 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2011-Dec-16 04:05:21 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-16 04:05:21 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-16 04:05:21 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-16 04:05:21 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2011-Dec-16 04:05:21 COMMAND run_command_line: EXECUTING command 13: 'ENDIF' 2011-Dec-16 04:05:21 COMMAND run_command_line: EXECUTING command 16: 'IF LSTSLEW(AGES3193_p3_159) < 092010 THEN' 2011-Dec-16 04:05:21 LOG3 is_if_valid: Current source data: up 258.6 8.8 UP - - 120 2.0 2011-Dec-16 04:05:21 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_159) < 092010 2011-Dec-16 04:05:21 INFO5 is_if_valid: Condition parsed as: 9.3133953333333324 < 9.3361111111111121 2011-Dec-16 04:05:21 COMMAND run_command_line: EXECUTING command 17: 'FIXEDDRIFT az=257.78 alfaangle=-59.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_159 ra=95300.00 dec=195600.00' 2011-Dec-16 04:05:21 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-16 04:05:22 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-16 04:05:22 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 257.78 -59.8 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_159 95300.00 195600.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-16 04:05:22 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-16 04:05:22 LOG5 begin_task: Level: (2) ID = <10064> Status = 0 0 0 0 ok 2011-Dec-16 04:05:22 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_157' 2011-Dec-16 04:05:22 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-16 04:05:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_159} 2011-Dec-16 04:05:22 INFO3 fixed_driftmap: Sending telescope to Az = 257.78 and ZA = 8.06 2011-Dec-16 04:05:22 LOG3 track_source: Calling 'track_source AGES3193_p3_159 257.78 8.0589026001 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-16 04:05:22 START begin_task: Starting task 'sending tracking commands' 2011-Dec-16 04:05:22 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2011-Dec-16 04:05:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_159} INFO {Slewing to source 'AGES3193_p3_159' ...} 2011-Dec-16 04:05:22 INFO1 track_source: Starting to track AGES3193_p3_159 2011-Dec-16 04:05:22 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_159" 2011-Dec-16 04:05:22 LOG3 vw_send: To DATATAKING: set ra 257.78 2011-Dec-16 04:05:22 LOG3 vw_send: To DATATAKING: set dec 8.0589026001 2011-Dec-16 04:05:22 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-16 04:05:22 LOG3 vw_send: To DATATAKING: pnt tr 257.78 8.0589026001 -CF 2011-Dec-16 04:05:22 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 04:05:22 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-16 04:05:22 LOG5 finish_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2011-Dec-16 04:05:22 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-16 04:05:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 04:05:22 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-16 04:05:22 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2011-Dec-16 04:05:22 START begin_task: Starting task 'rotate ALFA to -59.8 degrees' 2011-Dec-16 04:05:22 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2011-Dec-16 04:05:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -59.8 degrees ...} 2011-Dec-16 04:05:22 INFO2 rotate_alfa: ALFA commanded to -59.8 degrees 2011-Dec-16 04:05:22 LOG3 sock_errsend: To ALFAMOTOR: POSITION -59.8 REPLY 2011-Dec-16 04:05:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-16 04:05:22 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-16 04:05:22 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2011-Dec-16 04:05:22 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_159" 2011-Dec-16 04:05:22 LOG4 got_cormsg: From DATATAKING: set ra 257.78 2011-Dec-16 04:05:22 LOG4 got_cormsg: From DATATAKING: set dec 8.0589026001 2011-Dec-16 04:05:22 LOG4 got_cormsg: From DATATAKING: vw% 257.78 2011-Dec-16 04:05:22 LOG4 got_cormsg: From DATATAKING: vw% 8.0589026001 2011-Dec-16 04:05:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:05:22 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-16 04:05:22 LOG4 got_cormsg: From DATATAKING: pnt tr 257.78 8.0589026001 -CF 2011-Dec-16 04:05:22 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 04:05:22 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-16 04:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 04:05:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:05:27 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-16 04:05:27 INFO3 alfa_motor: ALFA rotator in-position -59.80 degrees 2011-Dec-16 04:05:27 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-16 04:05:27 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2011-Dec-16 04:05:27 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-16 04:05:27 STOP finish_task: Finishing task 'rotate ALFA to -59.8 degrees' 2011-Dec-16 04:05:27 LOG5 finish_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2011-Dec-16 04:05:27 INFO2 finish_task: DONE finished configuration: rotating ALFA to -59.8 degrees 2011-Dec-16 04:05:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 04:05:27 STOP end_task: Finishing task 'rotate ALFA to -59.8 degrees' with status 'OK' 2011-Dec-16 04:05:27 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2011-Dec-16 04:05:27 START begin_task: Starting task 'waiting on telescope' 2011-Dec-16 04:05:27 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2011-Dec-16 04:05:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-16 04:05:27 LOG3 waittrk: Start waittrk 5 2011-Dec-16 04:05:27 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-16 04:05:27 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2011-Dec-16 04:05:32 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-16 04:05:32 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2011-Dec-16 04:05:32 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-16 04:05:32 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2011-Dec-16 04:07:44 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-16 04:07:44 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2011-Dec-16 04:07:44 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-16 04:07:44 INFO2 waittrk: Now tracking AGES3193_p3_159 2011-Dec-16 04:07:44 LOG4 waittrk: Current telescope position: Az = 257.25 ZA = 8.05 2011-Dec-16 04:07:44 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-16 04:07:44 LOG5 finish_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2011-Dec-16 04:07:44 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-16 04:07:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 04:07:44 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-16 04:07:44 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2011-Dec-16 04:07:44 START begin_task: Starting task 'selecting calibration type' 2011-Dec-16 04:07:44 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2011-Dec-16 04:07:44 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-16 04:07:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-16 04:07:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 04:07:44 START begin_task: Starting task 'waiting on setcal' 2011-Dec-16 04:07:44 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2011-Dec-16 04:07:44 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-16 04:07:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 04:07:45 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:07:45 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-16 04:07:45 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-16 04:07:45 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2011-Dec-16 04:07:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-16 04:07:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-16 04:07:45 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-16 04:07:45 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-16 04:07:45 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2011-Dec-16 04:07:45 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:07:45 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-16 04:07:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-16 04:07:45 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2011-Dec-16 04:07:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-16 04:07:45 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-16 04:07:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-16 04:07:45 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-16 04:07:45 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-16 04:07:45 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2011-Dec-16 04:07:45 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-16 04:07:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-16 04:07:45 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2011-Dec-16 04:07:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-16 04:07:45 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-16 04:07:45 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-16 04:07:45 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2011-Dec-16 04:07:45 LOG5 dopset_later: Calling 'dopset_later 57.184856702138177' 2011-Dec-16 04:07:45 INFO3 dopset_later: Setting Doppler correction for 04:08:42 (57.2 seconds from now) 2011-Dec-16 04:07:45 LOG5 antvel: Calling 'antvel 257.780000 8.058903 F Heliocentric 57.184856702138177' 2011-Dec-16 04:07:45 LOG2 antvel: Transforming current Az = 257.78 ZA = 8.06 to apparent RA = 09:53:41.4 Dec = +19:52:23.2 2011-Dec-16 04:07:45 LOG2 antvel: Parameters to Doppler: Heliocentric 29322 2011 350 0.0 2011-Dec-16 04:07:45 INFO5 antvel: Computed antenna velocity: -25.94520 km/s 2011-Dec-16 04:07:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-25.9451953825 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-16 04:07:45 INFO4 dopset_gen: New sky frequencies: 1381.362977 1381.362977 1381.362977 1381.362977 1381.362977 1381.362977 1381.362977 1381.362977 1381.362977 2011-Dec-16 04:07:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.362977 sky0=1381.362977 sky1=1381.362977 sky2=1381.362977 sky3=1381.362977 sky4=1381.362977 sky5=1381.362977 sky6=1381.362977 sky7=1381.362977 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-16 04:07:45 LOG2 dopset_gen: Result from 'sky2syn': 1631.362977 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-16 04:07:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631362977.0} 2011-Dec-16 04:07:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 04:07:46 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-16 04:07:46 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-16 04:07:46 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:07.3 Dec = +19:55:46.8 2011-Dec-16 04:07:46 LOG3 track_source: Calling 'track_source AGES3193_p3_159 095207.3 195546.8 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-16 04:07:46 START begin_task: Starting task 'sending tracking commands' 2011-Dec-16 04:07:46 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2011-Dec-16 04:07:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_159} INFO {Slewing to source 'AGES3193_p3_159' ...} 2011-Dec-16 04:07:46 INFO1 track_source: Starting to track AGES3193_p3_159 2011-Dec-16 04:07:46 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_159" 2011-Dec-16 04:07:46 LOG3 vw_send: To DATATAKING: set ra 095207.3 2011-Dec-16 04:07:46 LOG3 vw_send: To DATATAKING: set dec 195546.8 2011-Dec-16 04:07:46 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-16 04:07:46 LOG3 vw_send: To DATATAKING: pnt tr 095207.3 195546.8 -CJ 2011-Dec-16 04:07:46 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 04:07:46 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-16 04:07:46 LOG5 finish_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2011-Dec-16 04:07:46 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-16 04:07:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 04:07:46 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-16 04:07:46 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2011-Dec-16 04:07:46 START begin_task: Starting task 'waiting on telescope' 2011-Dec-16 04:07:46 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2011-Dec-16 04:07:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-16 04:07:46 LOG3 waittrk: Start waittrk 5 2011-Dec-16 04:07:46 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-16 04:07:46 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2011-Dec-16 04:07:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631362977.0} 2011-Dec-16 04:07:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 04:07:46 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-16 04:07:46 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_159" 2011-Dec-16 04:07:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:07:46 LOG4 got_cormsg: From DATATAKING: set ra 095207.3 2011-Dec-16 04:07:46 LOG4 got_cormsg: From DATATAKING: set dec 195546.8 2011-Dec-16 04:07:46 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-16 04:07:46 LOG4 got_cormsg: From DATATAKING: pnt tr 095207.3 195546.8 -CJ 2011-Dec-16 04:07:46 LOG4 got_cormsg: From DATATAKING: 095207.3 2011-Dec-16 04:07:46 LOG4 got_cormsg: From DATATAKING: vw% 195546.8 2011-Dec-16 04:07:46 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2011-Dec-16 04:07:46 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 04:07:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:07:51 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-16 04:07:51 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2011-Dec-16 04:07:51 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-16 04:07:51 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2011-Dec-16 04:07:53 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-16 04:07:53 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2011-Dec-16 04:07:53 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-16 04:07:53 INFO2 waittrk: Now tracking AGES3193_p3_159 2011-Dec-16 04:07:53 LOG4 waittrk: Current telescope position: Az = 257.25 ZA = 8.03 2011-Dec-16 04:07:53 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-16 04:07:53 LOG5 finish_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2011-Dec-16 04:07:53 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-16 04:07:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 04:07:53 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-16 04:07:53 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2011-Dec-16 04:07:53 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-16 04:07:53 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2011-Dec-16 04:07:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-16 04:07:53 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-16 04:07:53 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-16 04:07:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-16 04:07:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 04:07:53 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-16 04:07:53 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2011-Dec-16 04:07:53 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-16 04:07:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 04:07:55 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:07:55 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-16 04:07:55 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-16 04:07:55 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2011-Dec-16 04:07:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-16 04:07:55 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-16 04:07:55 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2011-Dec-16 04:07:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-16 04:07:55 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-16 04:07:55 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-16 04:07:55 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-16 04:07:55 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-16 04:07:55 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-16 04:07:55 LOG5 begin_task: Level: (5) ID = <10082> Status = 0 0 0 0 ok 2011-Dec-16 04:07:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-16 04:07:55 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:07:55 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 8 5 dB 2011-Dec-16 04:07:55 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 3 dB 2011-Dec-16 04:07:55 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 2 dB 2011-Dec-16 04:07:55 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2011-Dec-16 04:07:55 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-16 04:07:55 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-16 04:07:55 LOG5 end_task: Level: (5) ID = <10082> Status = 0 0 0 0 ok 2011-Dec-16 04:07:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.099 1.026 ALFA beam 1: 0.894 1.125 2011-Dec-16 04:07:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.895 0.963 ALFA beam 3: 1.019 1.076 2011-Dec-16 04:07:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.803 1.061 ALFA beam 5: 0.925 1.071 2011-Dec-16 04:07:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.089 0.014 ALFA beam 7: 0.952 0.014 2011-Dec-16 04:07:56 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-16 04:07:56 LOG5 finish_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2011-Dec-16 04:07:56 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-16 04:07:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 04:07:56 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-16 04:07:56 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2011-Dec-16 04:07:56 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-16 04:07:56 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2011-Dec-16 04:07:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-16 04:07:56 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-16 04:07:56 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-16 04:07:56 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-16 04:07:56 LOG5 begin_task: Level: (5) ID = <10084> Status = 0 0 0 0 ok 2011-Dec-16 04:07:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:07:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.099 1.026 0.894 1.125 2011-Dec-16 04:07:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.895 0.963 1.019 1.076 2011-Dec-16 04:07:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.803 1.061 0.925 1.071 2011-Dec-16 04:07:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.089 0.014 0.952 0.014 2011-Dec-16 04:08:01 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.6 27.7 B 29.7 29.8 mn:A 0.2 0.1 B -0.3 -0.3 gn: 11 11 2011-Dec-16 04:08:01 INFO3 from_mock: From MOCK: b0s1g0 rms:A 31.8 30.4 B 27.6 29.2 mn:A 0.3 -0.5 B -0.3 0.2 gn: 12 11 2011-Dec-16 04:08:01 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.5 28.5 B 32.5 28.4 mn:A 0.7 0.7 B 0.0 -0.1 gn: 7 11 2011-Dec-16 04:08:01 INFO3 from_mock: From MOCK: b1s1g0 rms:A 29.8 27.5 B 30.7 30.7 mn:A -0.3 -0.2 B 0.6 0.1 gn: 8 10 2011-Dec-16 04:08:01 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.9 31.0 B 27.8 29.1 mn:A 0.0 -0.2 B 0.3 -0.0 gn: 11 11 2011-Dec-16 04:08:01 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.1 29.4 B 32.2 29.9 mn:A 0.2 -0.3 B 0.2 0.2 gn: 11 12 2011-Dec-16 04:08:01 INFO3 from_mock: From MOCK: b3s0g0 rms:A 28.6 28.4 B 30.6 27.3 mn:A 0.3 -0.3 B 0.1 -0.3 gn: 12 12 2011-Dec-16 04:08:01 INFO3 from_mock: From MOCK: b3s1g0 rms:A 29.9 29.2 B 29.0 30.2 mn:A -0.3 0.4 B 0.2 0.4 gn: 12 12 2011-Dec-16 04:08:01 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.0 29.1 B 31.0 31.1 mn:A -0.3 -0.3 B -0.5 0.0 gn: 13 12 2011-Dec-16 04:08:01 INFO3 from_mock: From MOCK: b4s1g0 rms:A 31.9 28.9 B 29.8 28.7 mn:A -0.1 -0.0 B -0.4 0.2 gn: 16 13 2011-Dec-16 04:08:02 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.0 28.0 B 30.3 30.3 mn:A 0.5 0.4 B -0.0 0.4 gn: 12 11 2011-Dec-16 04:08:02 INFO3 from_mock: From MOCK: b5s1g0 rms:A 29.2 29.0 B 27.2 26.9 mn:A -0.4 0.2 B -0.1 0.4 gn: 12 10 2011-Dec-16 04:08:02 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.6 29.9 B 14.0 14.5 mn:A -0.5 0.1 B 0.5 -0.4 gn: 13 31 2011-Dec-16 04:08:02 INFO3 from_mock: From MOCK: b6s1g0 rms:A 29.6 26.9 B 11.1 10.8 mn:A 0.6 0.5 B 0.1 0.2 gn: 13 31 2011-Dec-16 04:08:02 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-16 04:08:02 LOG5 end_task: Level: (5) ID = <10084> Status = 0 0 0 0 ok 2011-Dec-16 04:08:02 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-16 04:08:02 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-16 04:08:02 LOG5 finish_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2011-Dec-16 04:08:02 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-16 04:08:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 04:08:02 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-16 04:08:02 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2011-Dec-16 04:08:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-16 04:08:02 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-16 04:08:02 LOG5 finish_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2011-Dec-16 04:08:02 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-16 04:08:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 04:08:02 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-16 04:08:02 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2011-Dec-16 04:08:02 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2011-Dec-16 04:08:02 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2011-Dec-16 04:08:02 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2011-Dec-16 04:08:02 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2011-Dec-16 04:08:02 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-16 04:08:02 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-16 04:08:02 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2011-Dec-16 04:08:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-16 04:08:02 START begin_task: Starting task 'selecting calibration type' 2011-Dec-16 04:08:02 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2011-Dec-16 04:08:02 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-16 04:08:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-16 04:08:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 04:08:02 START begin_task: Starting task 'waiting on setcal' 2011-Dec-16 04:08:02 LOG5 begin_task: Level: (5) ID = <10087> Status = 0 0 0 0 ok 2011-Dec-16 04:08:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2011-Dec-16 04:08:02 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-16 04:08:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 04:08:02 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:08:02 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-16 04:08:02 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-16 04:08:02 LOG5 end_task: Level: (5) ID = <10087> Status = 0 0 0 0 ok 2011-Dec-16 04:08:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-16 04:08:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-16 04:08:02 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-16 04:08:02 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-16 04:08:02 LOG5 begin_task: Level: (5) ID = <10088> Status = 0 0 0 0 ok 2011-Dec-16 04:08:02 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:08:03 NOTE WAPPDATA-new_file: New FITS file: wapp.20111216.a2048.0001.fits 2011-Dec-16 04:08:03 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111216.a2048.0001.fits} 2011-Dec-16 04:08:03 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-16 04:08:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-16 04:08:03 LOG5 end_task: Level: (5) ID = <10088> Status = 0 0 0 0 ok 2011-Dec-16 04:08:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-16 04:08:03 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-16 04:08:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-16 04:08:03 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-16 04:08:03 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-16 04:08:03 LOG5 begin_task: Level: (5) ID = <10089> Status = 0 0 0 0 ok 2011-Dec-16 04:08:03 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-16 04:08:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-16 04:08:03 LOG5 end_task: Level: (5) ID = <10089> Status = 0 0 0 0 ok 2011-Dec-16 04:08:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-16 04:08:03 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-16 04:08:03 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-16 04:08:03 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2011-Dec-16 04:08:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-16 04:08:03 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-16 04:08:03 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-16 04:08:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-16 04:08:04 LOG5 begin_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2011-Dec-16 04:08:04 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-16 04:08:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-16 04:08:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-16 04:08:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-16 04:08:04 LOG5 end_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2011-Dec-16 04:08:04 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-16 04:08:04 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-16 04:08:04 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2011-Dec-16 04:08:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-16 04:08:04 LOG5 log_alfabeam: Parameters: 9.8686944444444453 19.929666666666666 9.325464 2011.9587193893071 -59.800007 2011-Dec-16 04:08:04 LOG4 log_alfabeam: ALFABEAM 0 9.868694444444445 19.929666666666670 2011-Dec-16 04:08:04 LOG4 log_alfabeam: ALFABEAM 1 9.869712513467483 19.839398674780490 2011-Dec-16 04:08:04 LOG4 log_alfabeam: ALFABEAM 2 9.875679812403405 19.899135542465768 2011-Dec-16 04:08:04 LOG4 log_alfabeam: ALFABEAM 3 9.874616274242399 19.990364868805923 2011-Dec-16 04:08:04 LOG4 log_alfabeam: ALFABEAM 4 9.867602530579905 20.019768562587856 2011-Dec-16 04:08:04 LOG4 log_alfabeam: ALFABEAM 5 9.861700521294251 19.959054550283724 2011-Dec-16 04:08:04 LOG4 log_alfabeam: ALFABEAM 6 9.862746871406538 19.869911052050490 2011-Dec-16 04:08:04 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-16 04:08:04 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-16 04:08:04 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-16 04:08:04 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_159 2011-Dec-16 04:08:04 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-16 04:08:04 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-16 04:08:04 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-16 04:08:04 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-16 04:08:04 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-16 04:08:04 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-16 04:08:04 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-16 04:08:04 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-16 04:08:04 LOG3 take_mock_data: PSET configuration: patternid=135000003 2011-Dec-16 04:08:04 LOG3 take_mock_data: PSET configuration: scanid=135000004 2011-Dec-16 04:08:04 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-16 04:08:04 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-16 04:08:04 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-16 04:08:04 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456362977.0 2011-Dec-16 04:08:04 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306362977.0 2011-Dec-16 04:08:04 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-16 04:08:04 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-16 04:08:04 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_159:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=135000003:scanid=135000004:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456362977.0:topobfreqhz=1306362977.0:filetype=1 2011-Dec-16 04:08:04 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-16 04:08:04 LOG5 begin_task: Level: (5) ID = <10092> Status = 0 0 0 0 ok 2011-Dec-16 04:08:04 LOG4 from_mock: From MOCK: psetok 2011-Dec-16 04:08:04 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-16 04:08:04 LOG5 end_task: Level: (5) ID = <10092> Status = 0 0 0 0 ok 2011-Dec-16 04:08:04 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-16 04:08:04 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-16 04:08:04 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-16 04:08:04 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-16 04:08:04 LOG5 begin_task: Level: (5) ID = <10093> Status = 0 0 0 0 ok 2011-Dec-16 04:08:04 LOG4 from_mock: From MOCK: starok 2011-Dec-16 04:08:04 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-16 04:08:04 LOG5 end_task: Level: (5) ID = <10093> Status = 0 0 0 0 ok 2011-Dec-16 04:08:04 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-16 04:08:04 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135000004 2011-Dec-16 04:08:04 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-16 04:08:04 LOG5 begin_task: Level: (5) ID = <10094> Status = 0 0 0 0 ok 2011-Dec-16 04:08:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 04:08:04 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-16 04:08:04 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-16 04:08:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-16 04:08:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29285.00 2011-Dec-16 04:08:06 INFO2 got_mock_message: Mock spectrometer start file number is 00300 2011-Dec-16 04:08:06 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-16 04:08:06 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-16 04:08:06 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-16 04:08:06 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-16 04:08:06 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-16 04:08:06 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-16 04:08:06 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-16 04:08:06 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-16 04:08:06 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-16 04:08:06 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-16 04:08:06 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-16 04:08:06 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-16 04:08:06 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:08:06 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:08:06 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:08:06 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:08:06 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:08:06 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:08:06 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:08:09 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:08:09.00 2011-Dec-16 04:08:09 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324022889.00 Fri Dec 16 04:08:09 2011 2011-Dec-16 04:08:09 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-16 04:08:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.362977 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 04:08:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.362977 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 04:08:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.362977 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 04:08:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.362977 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 04:08:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.362977 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 04:08:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.362977 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 04:08:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.362977 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 04:08:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.362977 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 04:08:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.362977 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 04:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:08:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 04:08:15 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-16 04:08:15 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-16 04:08:15 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-16 04:08:15 LOG5 end_task: Level: (5) ID = <10094> Status = 0 0 0 0 ok 2011-Dec-16 04:08:15 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-16 04:08:15 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2011-Dec-16 04:08:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-16 04:08:15 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-16 04:08:15 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-16 04:08:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-16 04:08:15 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2011-Dec-16 04:08:15 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-16 04:08:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-16 04:08:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-16 04:08:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-16 04:08:15 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2011-Dec-16 04:08:15 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-16 04:08:15 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-16 04:08:15 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2011-Dec-16 04:08:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-16 04:08:15 LOG5 log_alfabeam: Parameters: 9.8686944444444453 19.929666666666666 9.328528 2011.958719737876 -59.800007 2011-Dec-16 04:08:15 LOG4 log_alfabeam: ALFABEAM 0 9.868694444444442 19.929666666666670 2011-Dec-16 04:08:15 LOG4 log_alfabeam: ALFABEAM 1 9.869719800142272 19.839415103351392 2011-Dec-16 04:08:15 LOG4 log_alfabeam: ALFABEAM 2 9.875682325496367 19.899247869072397 2011-Dec-16 04:08:15 LOG4 log_alfabeam: ALFABEAM 3 9.874611151151464 19.990465193227141 2011-Dec-16 04:08:15 LOG4 log_alfabeam: ALFABEAM 4 9.867594855288441 20.019750015773038 2011-Dec-16 04:08:15 LOG4 log_alfabeam: ALFABEAM 5 9.861698075665309 19.958936213863833 2011-Dec-16 04:08:15 LOG4 log_alfabeam: ALFABEAM 6 9.862751751518744 19.869815653972420 2011-Dec-16 04:08:15 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-16 04:08:15 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-16 04:08:15 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-16 04:08:15 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_159 2011-Dec-16 04:08:15 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-16 04:08:15 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-16 04:08:15 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-16 04:08:15 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-16 04:08:15 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-16 04:08:15 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-16 04:08:15 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-16 04:08:15 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-16 04:08:15 LOG3 take_mock_data: PSET configuration: patternid=135000003 2011-Dec-16 04:08:15 LOG3 take_mock_data: PSET configuration: scanid=135000005 2011-Dec-16 04:08:15 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-16 04:08:15 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-16 04:08:15 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-16 04:08:15 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456362977.0 2011-Dec-16 04:08:15 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306362977.0 2011-Dec-16 04:08:15 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-16 04:08:15 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-16 04:08:15 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_159:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=135000003:scanid=135000005:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456362977.0:topobfreqhz=1306362977.0:filetype=1 2011-Dec-16 04:08:15 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-16 04:08:15 LOG5 begin_task: Level: (5) ID = <10097> Status = 0 0 0 0 ok 2011-Dec-16 04:08:15 LOG4 from_mock: From MOCK: psetok 2011-Dec-16 04:08:15 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-16 04:08:15 LOG5 end_task: Level: (5) ID = <10097> Status = 0 0 0 0 ok 2011-Dec-16 04:08:15 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-16 04:08:15 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-16 04:08:15 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-16 04:08:15 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-16 04:08:15 LOG5 begin_task: Level: (5) ID = <10098> Status = 0 0 0 0 ok 2011-Dec-16 04:08:15 LOG4 from_mock: From MOCK: starok 2011-Dec-16 04:08:15 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-16 04:08:15 LOG5 end_task: Level: (5) ID = <10098> Status = 0 0 0 0 ok 2011-Dec-16 04:08:15 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-16 04:08:15 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135000005 2011-Dec-16 04:08:15 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-16 04:08:15 LOG5 begin_task: Level: (5) ID = <10099> Status = 0 0 0 0 ok 2011-Dec-16 04:08:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 04:08:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-16 04:08:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29296.00 2011-Dec-16 04:08:16 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-16 04:08:16 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-16 04:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.531 (still bad) 2011-Dec-16 04:08:18 INFO2 got_mock_message: Mock spectrometer start file number is 00400 2011-Dec-16 04:08:18 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-16 04:08:18 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-16 04:08:18 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-16 04:08:18 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-16 04:08:18 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-16 04:08:18 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-16 04:08:18 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-16 04:08:18 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-16 04:08:18 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-16 04:08:18 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-16 04:08:18 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-16 04:08:18 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-16 04:08:18 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:08:18 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:08:18 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:08:18 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:08:18 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:08:18 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:08:18 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:08:21 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:08:21.01 2011-Dec-16 04:08:21 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324022901.01 Fri Dec 16 04:08:21 2011 2011-Dec-16 04:08:21 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-16 04:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.362977 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 04:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.362977 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 04:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.362977 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 04:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.362977 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 04:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.362977 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 04:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.362977 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 04:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.362977 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 04:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.362977 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 04:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.362977 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 04:08:21 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-16 04:08:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 04:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:08:26 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-16 04:08:27 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-16 04:08:27 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-16 04:08:27 LOG5 end_task: Level: (5) ID = <10099> Status = 0 0 0 0 ok 2011-Dec-16 04:08:27 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-16 04:08:27 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2011-Dec-16 04:08:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-16 04:08:27 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-16 04:08:27 LOG5 finish_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2011-Dec-16 04:08:27 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-16 04:08:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 04:08:27 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-16 04:08:27 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2011-Dec-16 04:08:27 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-16 04:08:27 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 257.78 and ZA = 8.06 2011-Dec-16 04:08:27 LOG3 track_source: Calling 'track_source AGES3193_p3_159 257.78 8.0589026001 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-16 04:08:27 START begin_task: Starting task 'sending tracking commands' 2011-Dec-16 04:08:27 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2011-Dec-16 04:08:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_159} INFO {Slewing to source 'AGES3193_p3_159' ...} 2011-Dec-16 04:08:27 INFO1 track_source: Starting to track AGES3193_p3_159 2011-Dec-16 04:08:27 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_159" 2011-Dec-16 04:08:27 LOG3 vw_send: To DATATAKING: set ra 257.78 2011-Dec-16 04:08:27 LOG3 vw_send: To DATATAKING: set dec 8.0589026001 2011-Dec-16 04:08:27 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-16 04:08:27 LOG3 vw_send: To DATATAKING: pnt tr 257.78 8.0589026001 -CF 2011-Dec-16 04:08:27 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 04:08:27 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-16 04:08:27 LOG5 finish_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2011-Dec-16 04:08:27 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-16 04:08:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 04:08:27 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-16 04:08:27 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2011-Dec-16 04:08:27 LOG1 fixed_driftmap: Parameters: HA = -00:33:30.5 Start = 09:20:11.0 LST = 09:19:54.7 diff = 16.2 secs 2011-Dec-16 04:08:27 INFO2 fixed_driftmap: Waiting 14.2 seconds for RA 9:53:42 2011-Dec-16 04:08:27 INFO2 lstwait: Waiting for 14.2 secs from LST 09:19:55 to LST 09:20:09 ... 2011-Dec-16 04:08:27 LOG4 send_obs_status: To obs_status: <1> TASKTIME 14.19056970693393 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-16 04:08:27 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-16 04:08:27 LOG5 begin_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2011-Dec-16 04:08:27 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_159" 2011-Dec-16 04:08:27 LOG4 got_cormsg: From DATATAKING: set ra 257.78 2011-Dec-16 04:08:27 LOG4 got_cormsg: From DATATAKING: set dec 8.0589026001 2011-Dec-16 04:08:27 LOG4 got_cormsg: From DATATAKING: vw% 257.78 2011-Dec-16 04:08:27 LOG4 got_cormsg: From DATATAKING: vw% 8.0589026001 2011-Dec-16 04:08:27 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:08:27 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-16 04:08:27 LOG4 got_cormsg: From DATATAKING: pnt tr 257.78 8.0589026001 -CF 2011-Dec-16 04:08:27 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 04:08:27 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-16 04:08:27 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:08:41 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-16 04:08:41 LOG5 end_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2011-Dec-16 04:08:41 LOG4 lstwait: Finished waiting 0.81 seconds late 2011-Dec-16 04:08:41 INFO3 lstwait: Finished waiting 2011-Dec-16 04:08:41 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-16 04:08:41 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-16 04:08:41 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-16 04:08:41 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-16 04:08:41 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-16 04:08:41 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-16 04:08:41 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2011-Dec-16 04:08:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-16 04:08:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-16 04:08:41 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-16 04:08:41 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-16 04:08:41 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-16 04:08:41 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_159 2011-Dec-16 04:08:41 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-16 04:08:41 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-16 04:08:41 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-16 04:08:41 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-16 04:08:41 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-16 04:08:41 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-16 04:08:41 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-16 04:08:41 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-16 04:08:41 LOG3 take_mock_data: PSET configuration: patternid=135000006 2011-Dec-16 04:08:41 LOG3 take_mock_data: PSET configuration: scanid=135000006 2011-Dec-16 04:08:41 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-16 04:08:41 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-16 04:08:41 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-16 04:08:41 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456362977.0 2011-Dec-16 04:08:41 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306362977.0 2011-Dec-16 04:08:41 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-16 04:08:41 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-16 04:08:41 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_159:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=135000006:scanid=135000006:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456362977.0:topobfreqhz=1306362977.0:filetype=1 2011-Dec-16 04:08:41 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-16 04:08:41 LOG5 begin_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2011-Dec-16 04:08:41 LOG4 from_mock: From MOCK: psetok 2011-Dec-16 04:08:41 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-16 04:08:41 LOG5 end_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2011-Dec-16 04:08:41 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-16 04:08:41 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-16 04:08:41 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-16 04:08:41 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-16 04:08:41 LOG5 begin_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2011-Dec-16 04:08:41 LOG4 from_mock: From MOCK: starok 2011-Dec-16 04:08:41 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-16 04:08:42 LOG5 end_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2011-Dec-16 04:08:42 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-16 04:08:42 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 135000006 2011-Dec-16 04:08:42 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-16 04:08:42 LOG5 begin_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2011-Dec-16 04:08:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 04:08:42 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-16 04:08:42 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-16 04:08:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-16 04:08:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29323.00 2011-Dec-16 04:08:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.362977 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 04:08:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.362977 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 04:08:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.362977 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 04:08:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.362977 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 04:08:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.362977 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 04:08:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.362977 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 04:08:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.362977 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 04:08:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.362977 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 04:08:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.362977 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 04:08:44 INFO2 got_mock_message: Mock spectrometer start file number is 00500 2011-Dec-16 04:08:44 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-16 04:08:44 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2011-Dec-16 04:08:44 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-16 04:08:44 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-16 04:08:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-16 04:08:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-16 04:08:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-16 04:08:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-16 04:08:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-16 04:08:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-16 04:08:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-16 04:08:44 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-16 04:08:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 04:08:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 04:08:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 04:08:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 04:08:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 04:08:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 04:08:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 04:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-16 04:08:47 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:08:47.00 2011-Dec-16 04:08:47 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324022927.00 Fri Dec 16 04:08:47 2011 2011-Dec-16 04:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-16 04:08:47 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-16 04:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-16 04:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-16 04:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-16 04:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-16 04:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-16 04:08:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:08:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.099 1.029 0.894 1.129 2011-Dec-16 04:08:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.892 0.962 1.019 1.079 2011-Dec-16 04:08:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.806 1.065 0.928 1.073 2011-Dec-16 04:08:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.089 0.014 0.952 0.014 2011-Dec-16 04:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-16 04:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-16 04:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-16 04:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-16 04:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-16 04:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-16 04:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-16 04:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-16 04:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-16 04:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-16 04:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-16 04:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-16 04:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-16 04:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-16 04:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-16 04:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-16 04:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-16 04:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-16 04:10:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:10:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.107 1.037 0.899 1.135 2011-Dec-16 04:10:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.896 0.965 1.025 1.085 2011-Dec-16 04:10:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.809 1.072 0.935 1.082 2011-Dec-16 04:10:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.099 0.014 0.959 0.014 2011-Dec-16 04:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-16 04:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-16 04:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-16 04:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.153 (still bad) 2011-Dec-16 04:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-16 04:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-16 04:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-16 04:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-16 04:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-16 04:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-16 04:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:11:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:11:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.032 0.895 1.131 2011-Dec-16 04:11:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.894 0.963 1.021 1.082 2011-Dec-16 04:11:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.808 1.068 0.930 1.075 2011-Dec-16 04:11:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.093 0.014 0.954 0.014 2011-Dec-16 04:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-16 04:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-16 04:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-16 04:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-16 04:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-16 04:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-16 04:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:12:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:12:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.035 0.896 1.132 2011-Dec-16 04:12:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.895 0.966 1.029 1.090 2011-Dec-16 04:12:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.809 1.069 0.933 1.075 2011-Dec-16 04:12:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.094 0.014 0.956 0.014 2011-Dec-16 04:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-16 04:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-16 04:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-16 04:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-16 04:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-16 04:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-16 04:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-16 04:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:13:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:13:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.032 0.894 1.132 2011-Dec-16 04:13:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.897 0.967 1.025 1.085 2011-Dec-16 04:13:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.808 1.068 0.934 1.077 2011-Dec-16 04:13:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 0.014 0.960 0.014 2011-Dec-16 04:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-16 04:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-16 04:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-16 04:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-16 04:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-16 04:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:14:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:14:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.034 0.895 1.134 2011-Dec-16 04:14:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.896 0.965 1.023 1.084 2011-Dec-16 04:14:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.817 1.083 0.934 1.075 2011-Dec-16 04:14:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 0.014 0.956 0.014 2011-Dec-16 04:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-16 04:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-16 04:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-16 04:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-16 04:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-16 04:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-16 04:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-16 04:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:15:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:15:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.099 1.033 0.901 1.142 2011-Dec-16 04:15:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.894 0.963 1.022 1.084 2011-Dec-16 04:15:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.809 1.068 0.930 1.076 2011-Dec-16 04:15:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.094 0.014 0.954 0.014 2011-Dec-16 04:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-16 04:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-16 04:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-16 04:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-16 04:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-16 04:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-16 04:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-16 04:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-16 04:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-16 04:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-16 04:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-16 04:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-16 04:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-16 04:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-16 04:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-16 04:16:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:16:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 1.036 0.898 1.136 2011-Dec-16 04:16:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.898 0.965 1.025 1.087 2011-Dec-16 04:16:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.810 1.070 0.931 1.075 2011-Dec-16 04:16:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 0.014 0.956 0.014 2011-Dec-16 04:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-16 04:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-16 04:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-16 04:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-16 04:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-16 04:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-16 04:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-16 04:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-16 04:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-16 04:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-16 04:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-16 04:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-16 04:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-16 04:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-16 04:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-16 04:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-16 04:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-16 04:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-16 04:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-16 04:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:17:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:17:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.105 1.041 0.900 1.140 2011-Dec-16 04:17:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.899 0.970 1.025 1.089 2011-Dec-16 04:17:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.811 1.072 0.930 1.080 2011-Dec-16 04:17:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 0.014 0.960 0.014 2011-Dec-16 04:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:17:21 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 04:17:21.311 (seconds: 15441.311)!} 2011-Dec-16 04:17:21 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 04:17:21.311 (seconds: 15441.311)! 2011-Dec-16 04:17:22 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 15440.0 to 15441.0! 2011-Dec-16 04:17:23 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (15440.0 - 15442.0)! 2011-Dec-16 04:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-16 04:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-16 04:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-16 04:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-16 04:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-16 04:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-16 04:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-16 04:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-16 04:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-16 04:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-16 04:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-16 04:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-16 04:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.156 (still bad) 2011-Dec-16 04:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.156 (still bad) 2011-Dec-16 04:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.156 (still bad) 2011-Dec-16 04:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.151 (still bad) 2011-Dec-16 04:18:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:18:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.110 1.048 0.905 1.144 2011-Dec-16 04:18:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.942 1.017 1.029 1.090 2011-Dec-16 04:18:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.809 1.072 0.934 1.077 2011-Dec-16 04:18:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 0.014 0.956 0.014 2011-Dec-16 04:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-16 04:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.164 (still bad) 2011-Dec-16 04:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.200 (still bad) 2011-Dec-16 04:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.249 (still bad) 2011-Dec-16 04:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.302 (still bad) 2011-Dec-16 04:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.354 (still bad) 2011-Dec-16 04:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.393 (still bad) 2011-Dec-16 04:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.409 (still bad) 2011-Dec-16 04:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.401 (still bad) 2011-Dec-16 04:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.372 (still bad) 2011-Dec-16 04:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.328 (still bad) 2011-Dec-16 04:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.277 (still bad) 2011-Dec-16 04:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.227 (still bad) 2011-Dec-16 04:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.186 (still bad) 2011-Dec-16 04:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.160 (still bad) 2011-Dec-16 04:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.194 (still bad) 2011-Dec-16 04:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.259 (still bad) 2011-Dec-16 04:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.365 (still bad) 2011-Dec-16 04:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.425 (still bad) 2011-Dec-16 04:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.461 (still bad) 2011-Dec-16 04:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.464 (still bad) 2011-Dec-16 04:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.437 (still bad) 2011-Dec-16 04:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.385 (still bad) 2011-Dec-16 04:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.317 (still bad) 2011-Dec-16 04:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.248 (still bad) 2011-Dec-16 04:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.190 (still bad) 2011-Dec-16 04:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.149 (still bad) 2011-Dec-16 04:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:19:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:19:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.104 1.043 0.902 1.143 2011-Dec-16 04:19:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.898 0.969 1.027 1.088 2011-Dec-16 04:19:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.812 1.077 0.944 1.090 2011-Dec-16 04:19:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.119 0.014 0.976 0.014 2011-Dec-16 04:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-16 04:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-16 04:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-16 04:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-16 04:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-16 04:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-16 04:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-16 04:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-16 04:20:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:20:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.106 1.046 0.904 1.145 2011-Dec-16 04:20:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.899 0.968 1.025 1.087 2011-Dec-16 04:20:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.812 1.073 0.934 1.079 2011-Dec-16 04:20:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 0.014 0.956 0.014 2011-Dec-16 04:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-16 04:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-16 04:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-16 04:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-16 04:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:21:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:21:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.041 0.900 1.142 2011-Dec-16 04:21:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.897 0.968 1.028 1.088 2011-Dec-16 04:21:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.812 1.074 0.936 1.079 2011-Dec-16 04:21:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 0.014 0.957 0.014 2011-Dec-16 04:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-16 04:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-16 04:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-16 04:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:22:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:22:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.109 1.047 0.900 1.140 2011-Dec-16 04:22:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.897 0.968 1.026 1.088 2011-Dec-16 04:22:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.813 1.075 0.935 1.080 2011-Dec-16 04:22:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 0.014 0.958 0.014 2011-Dec-16 04:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-16 04:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:23:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:23:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 1.043 0.900 1.140 2011-Dec-16 04:23:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.899 0.969 1.026 1.090 2011-Dec-16 04:23:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.811 1.074 0.935 1.079 2011-Dec-16 04:23:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.095 0.014 0.956 0.014 2011-Dec-16 04:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 04:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-16 04:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:24:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:24:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 1.044 0.902 1.144 2011-Dec-16 04:24:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.901 0.972 1.030 1.091 2011-Dec-16 04:24:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.814 1.075 0.937 1.079 2011-Dec-16 04:24:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 0.014 0.957 0.014 2011-Dec-16 04:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-16 04:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-16 04:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-16 04:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-16 04:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-16 04:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-16 04:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-16 04:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-16 04:25:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:25:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.106 1.044 0.903 1.143 2011-Dec-16 04:25:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.900 0.972 1.028 1.091 2011-Dec-16 04:25:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.815 1.075 0.938 1.083 2011-Dec-16 04:25:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 0.014 0.960 0.014 2011-Dec-16 04:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-16 04:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 04:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-16 04:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:26:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:26:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.104 1.046 0.902 1.143 2011-Dec-16 04:26:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.901 0.974 1.029 1.094 2011-Dec-16 04:26:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.817 1.079 0.938 1.082 2011-Dec-16 04:26:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 0.014 0.959 0.014 2011-Dec-16 04:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-16 04:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-16 04:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-16 04:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-16 04:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-16 04:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-16 04:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-16 04:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-16 04:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-16 04:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-16 04:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-16 04:27:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:27:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 1.044 0.902 1.145 2011-Dec-16 04:27:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.902 0.975 1.027 1.093 2011-Dec-16 04:27:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.818 1.079 0.937 1.085 2011-Dec-16 04:27:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 0.014 0.958 0.014 2011-Dec-16 04:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-16 04:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-16 04:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-16 04:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-16 04:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-16 04:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-16 04:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-16 04:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-16 04:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-16 04:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-16 04:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-16 04:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-16 04:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-16 04:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-16 04:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-16 04:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-16 04:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:28:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:28:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.045 0.902 1.144 2011-Dec-16 04:28:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.904 0.974 1.030 1.094 2011-Dec-16 04:28:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.816 1.076 0.937 1.084 2011-Dec-16 04:28:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.099 0.014 0.959 0.014 2011-Dec-16 04:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 04:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 04:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 04:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-16 04:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.152 (still bad) 2011-Dec-16 04:28:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 04:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.153 (still bad) 2011-Dec-16 04:28:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.153 (still bad) 2011-Dec-16 04:28:48 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-16 04:28:48 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-16 04:28:48 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-16 04:28:48 LOG5 end_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2011-Dec-16 04:28:48 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-16 04:28:48 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2011-Dec-16 04:28:48 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-16 04:28:48 LOG5 finish_task: Level: (2) ID = <10064> Status = 0 0 0 0 ok 2011-Dec-16 04:28:48 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-16 04:28:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-16 04:28:48 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-16 04:28:48 LOG5 end_task: Level: (2) ID = <10064> Status = 0 0 0 0 ok 2011-Dec-16 04:28:48 COMMAND run_command_line: EXECUTING command 20: 'ENDIF' 2011-Dec-16 04:28:48 COMMAND run_command_line: EXECUTING command 23: 'IF LSTSLEW(AGES3193_p3_161) < 094340 THEN' 2011-Dec-16 04:28:48 LOG3 is_if_valid: Current source data: up 244.5 3.5 UP - - 96 1.9 2011-Dec-16 04:28:48 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_161) < 094340 2011-Dec-16 04:28:48 INFO5 is_if_valid: Condition parsed as: 9.7036316666666664 < 9.7277777777777779 2011-Dec-16 04:28:48 COMMAND run_command_line: EXECUTING command 24: 'FIXEDDRIFT az=237.72 alfaangle=-35.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_161 ra=95300.00 dec=195300.00' 2011-Dec-16 04:28:48 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-16 04:28:49 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-16 04:28:49 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 237.72 -35.3 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_161 95300.00 195300.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-16 04:28:49 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-16 04:28:49 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2011-Dec-16 04:28:49 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_159' 2011-Dec-16 04:28:49 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-16 04:28:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_161} 2011-Dec-16 04:28:49 INFO3 fixed_driftmap: Sending telescope to Az = 237.72 and ZA = 2.78 2011-Dec-16 04:28:49 LOG3 track_source: Calling 'track_source AGES3193_p3_161 237.72 2.7822902473 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-16 04:28:49 START begin_task: Starting task 'sending tracking commands' 2011-Dec-16 04:28:49 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2011-Dec-16 04:28:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_161} INFO {Slewing to source 'AGES3193_p3_161' ...} 2011-Dec-16 04:28:49 INFO1 track_source: Starting to track AGES3193_p3_161 2011-Dec-16 04:28:49 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_161" 2011-Dec-16 04:28:49 LOG3 vw_send: To DATATAKING: set ra 237.72 2011-Dec-16 04:28:49 LOG3 vw_send: To DATATAKING: set dec 2.7822902473 2011-Dec-16 04:28:49 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-16 04:28:49 LOG3 vw_send: To DATATAKING: pnt tr 237.72 2.7822902473 -CF 2011-Dec-16 04:28:49 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 04:28:49 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-16 04:28:49 LOG5 finish_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2011-Dec-16 04:28:49 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-16 04:28:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 04:28:49 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-16 04:28:49 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2011-Dec-16 04:28:49 START begin_task: Starting task 'rotate ALFA to -35.3 degrees' 2011-Dec-16 04:28:49 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2011-Dec-16 04:28:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -35.3 degrees ...} 2011-Dec-16 04:28:49 INFO2 rotate_alfa: ALFA commanded to -35.3 degrees 2011-Dec-16 04:28:49 LOG3 sock_errsend: To ALFAMOTOR: POSITION -35.3 REPLY 2011-Dec-16 04:28:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-16 04:28:49 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-16 04:28:49 LOG5 begin_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2011-Dec-16 04:28:49 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_161" 2011-Dec-16 04:28:49 LOG4 got_cormsg: From DATATAKING: set ra 237.72 2011-Dec-16 04:28:49 LOG4 got_cormsg: From DATATAKING: set dec 2.7822902473 2011-Dec-16 04:28:49 LOG4 got_cormsg: From DATATAKING: vw% 237.72 2011-Dec-16 04:28:49 LOG4 got_cormsg: From DATATAKING: vw% 2.7822902473 2011-Dec-16 04:28:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:28:49 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-16 04:28:49 LOG4 got_cormsg: From DATATAKING: pnt tr 237.72 2.7822902473 -CF 2011-Dec-16 04:28:49 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 04:28:49 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-16 04:28:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.153 (still bad) 2011-Dec-16 04:29:04 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-16 04:29:04 INFO3 alfa_motor: ALFA rotator in-position -35.30 degrees 2011-Dec-16 04:29:04 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-16 04:29:04 LOG5 end_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2011-Dec-16 04:29:04 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-16 04:29:04 STOP finish_task: Finishing task 'rotate ALFA to -35.3 degrees' 2011-Dec-16 04:29:04 LOG5 finish_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2011-Dec-16 04:29:04 INFO2 finish_task: DONE finished configuration: rotating ALFA to -35.3 degrees 2011-Dec-16 04:29:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 04:29:04 STOP end_task: Finishing task 'rotate ALFA to -35.3 degrees' with status 'OK' 2011-Dec-16 04:29:04 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2011-Dec-16 04:29:04 START begin_task: Starting task 'waiting on telescope' 2011-Dec-16 04:29:04 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2011-Dec-16 04:29:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-16 04:29:04 LOG3 waittrk: Start waittrk 5 2011-Dec-16 04:29:04 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-16 04:29:04 LOG5 begin_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2011-Dec-16 04:29:09 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-16 04:29:09 LOG5 end_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2011-Dec-16 04:29:09 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-16 04:29:09 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2011-Dec-16 04:31:06 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-16 04:31:06 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2011-Dec-16 04:31:06 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-16 04:31:06 INFO2 waittrk: Now tracking AGES3193_p3_161 2011-Dec-16 04:31:06 LOG4 waittrk: Current telescope position: Az = 236.74 ZA = 2.78 2011-Dec-16 04:31:06 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-16 04:31:06 LOG5 finish_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2011-Dec-16 04:31:06 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-16 04:31:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 04:31:06 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-16 04:31:06 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2011-Dec-16 04:31:06 START begin_task: Starting task 'selecting calibration type' 2011-Dec-16 04:31:06 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2011-Dec-16 04:31:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-16 04:31:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-16 04:31:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 04:31:06 START begin_task: Starting task 'waiting on setcal' 2011-Dec-16 04:31:06 LOG5 begin_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2011-Dec-16 04:31:06 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-16 04:31:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 04:31:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:31:07 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-16 04:31:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-16 04:31:07 LOG5 end_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2011-Dec-16 04:31:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-16 04:31:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-16 04:31:07 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-16 04:31:07 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-16 04:31:07 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2011-Dec-16 04:31:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:31:07 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-16 04:31:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-16 04:31:07 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2011-Dec-16 04:31:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-16 04:31:07 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-16 04:31:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-16 04:31:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-16 04:31:07 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-16 04:31:07 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2011-Dec-16 04:31:07 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-16 04:31:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-16 04:31:07 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2011-Dec-16 04:31:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-16 04:31:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-16 04:31:07 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-16 04:31:07 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2011-Dec-16 04:31:07 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Dec-16 04:31:07 INFO2 astwait: Waiting for 2 seconds from 08:31:07 to 08:31:09 UTC ... 2011-Dec-16 04:31:08 LOG4 send_obs_status: To obs_status: <1> TASKTIME 2 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-16 04:31:08 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Dec-16 04:31:08 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2011-Dec-16 04:31:09 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Dec-16 04:31:09 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2011-Dec-16 04:31:09 INFO3 astwait: Finished waiting 2011-Dec-16 04:31:09 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-16 04:31:09 LOG5 dopset_later: Calling 'dopset_later 60.812877712316599' 2011-Dec-16 04:31:09 INFO3 dopset_later: Setting Doppler correction for 04:32:09 (60.8 seconds from now) 2011-Dec-16 04:31:09 LOG5 antvel: Calling 'antvel 237.720000 2.782290 F Heliocentric 60.812877712316599' 2011-Dec-16 04:31:09 LOG2 antvel: Transforming current Az = 237.72 ZA = 2.78 to apparent RA = 09:53:41.3 Dec = +19:49:23.3 2011-Dec-16 04:31:09 LOG2 antvel: Parameters to Doppler: Heliocentric 30729 2011 350 0.0 2011-Dec-16 04:31:09 INFO5 antvel: Computed antenna velocity: -25.90557 km/s 2011-Dec-16 04:31:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-25.905567105399999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-16 04:31:09 INFO4 dopset_gen: New sky frequencies: 1381.362794 1381.362794 1381.362794 1381.362794 1381.362794 1381.362794 1381.362794 1381.362794 1381.362794 2011-Dec-16 04:31:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.362794 sky0=1381.362794 sky1=1381.362794 sky2=1381.362794 sky3=1381.362794 sky4=1381.362794 sky5=1381.362794 sky6=1381.362794 sky7=1381.362794 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-16 04:31:09 LOG2 dopset_gen: Result from 'sky2syn': 1631.362794 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-16 04:31:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631362794.0} 2011-Dec-16 04:31:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 04:31:09 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-16 04:31:09 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-16 04:31:09 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.7 Dec = +19:52:46.7 2011-Dec-16 04:31:09 LOG3 track_source: Calling 'track_source AGES3193_p3_161 095203.7 195246.7 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-16 04:31:09 START begin_task: Starting task 'sending tracking commands' 2011-Dec-16 04:31:09 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2011-Dec-16 04:31:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_161} INFO {Slewing to source 'AGES3193_p3_161' ...} 2011-Dec-16 04:31:09 INFO1 track_source: Starting to track AGES3193_p3_161 2011-Dec-16 04:31:09 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_161" 2011-Dec-16 04:31:09 LOG3 vw_send: To DATATAKING: set ra 095203.7 2011-Dec-16 04:31:09 LOG3 vw_send: To DATATAKING: set dec 195246.7 2011-Dec-16 04:31:09 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-16 04:31:09 LOG3 vw_send: To DATATAKING: pnt tr 095203.7 195246.7 -CJ 2011-Dec-16 04:31:09 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 04:31:09 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-16 04:31:09 LOG5 finish_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2011-Dec-16 04:31:09 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-16 04:31:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 04:31:09 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-16 04:31:09 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2011-Dec-16 04:31:09 START begin_task: Starting task 'waiting on telescope' 2011-Dec-16 04:31:09 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2011-Dec-16 04:31:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-16 04:31:09 LOG3 waittrk: Start waittrk 5 2011-Dec-16 04:31:09 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-16 04:31:09 LOG5 begin_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2011-Dec-16 04:31:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631362794.0} 2011-Dec-16 04:31:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 04:31:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:31:09 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_161" 2011-Dec-16 04:31:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:31:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:31:09 LOG4 got_cormsg: From DATATAKING: set ra 095203.7 2011-Dec-16 04:31:09 LOG4 got_cormsg: From DATATAKING: set dec 195246.7 2011-Dec-16 04:31:09 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-16 04:31:09 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.7 195246.7 -CJ 2011-Dec-16 04:31:09 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 04:31:09 LOG4 got_cormsg: From DATATAKING: 095203.7 2011-Dec-16 04:31:09 LOG4 got_cormsg: From DATATAKING: vw% 195246.7 2011-Dec-16 04:31:09 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2011-Dec-16 04:31:14 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-16 04:31:14 LOG5 end_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2011-Dec-16 04:31:14 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-16 04:31:14 LOG5 begin_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2011-Dec-16 04:31:21 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-16 04:31:21 LOG5 end_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2011-Dec-16 04:31:21 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-16 04:31:21 INFO2 waittrk: Now tracking AGES3193_p3_161 2011-Dec-16 04:31:21 LOG4 waittrk: Current telescope position: Az = 236.41 ZA = 2.74 2011-Dec-16 04:31:21 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-16 04:31:21 LOG5 finish_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2011-Dec-16 04:31:21 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-16 04:31:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 04:31:21 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-16 04:31:21 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2011-Dec-16 04:31:21 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-16 04:31:21 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2011-Dec-16 04:31:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-16 04:31:21 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-16 04:31:21 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-16 04:31:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-16 04:31:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 04:31:21 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-16 04:31:21 LOG5 begin_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2011-Dec-16 04:31:22 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-16 04:31:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 04:31:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:31:22 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-16 04:31:22 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-16 04:31:22 LOG5 end_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2011-Dec-16 04:31:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-16 04:31:22 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-16 04:31:22 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2011-Dec-16 04:31:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-16 04:31:22 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-16 04:31:22 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-16 04:31:22 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-16 04:31:22 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-16 04:31:22 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-16 04:31:22 LOG5 begin_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2011-Dec-16 04:31:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:31:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-16 04:31:22 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 7 6 dB 2011-Dec-16 04:31:22 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 3 dB 2011-Dec-16 04:31:22 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 2 dB 2011-Dec-16 04:31:22 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2011-Dec-16 04:31:22 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-16 04:31:22 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-16 04:31:22 LOG5 end_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2011-Dec-16 04:31:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.083 1.025 ALFA beam 1: 1.114 0.892 2011-Dec-16 04:31:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.895 0.962 ALFA beam 3: 1.032 1.087 2011-Dec-16 04:31:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.811 1.060 ALFA beam 5: 0.892 1.024 2011-Dec-16 04:31:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.056 0.014 ALFA beam 7: 0.921 0.014 2011-Dec-16 04:31:22 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-16 04:31:22 LOG5 finish_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2011-Dec-16 04:31:22 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-16 04:31:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 04:31:22 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-16 04:31:22 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2011-Dec-16 04:31:22 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-16 04:31:22 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2011-Dec-16 04:31:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-16 04:31:23 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-16 04:31:23 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-16 04:31:23 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-16 04:31:23 LOG5 begin_task: Level: (5) ID = <10127> Status = 0 0 0 0 ok 2011-Dec-16 04:31:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:31:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.083 1.025 1.114 0.892 2011-Dec-16 04:31:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.895 0.962 1.032 1.087 2011-Dec-16 04:31:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.811 1.060 0.892 1.024 2011-Dec-16 04:31:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.056 0.014 0.921 0.014 2011-Dec-16 04:31:28 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.3 27.5 B 29.6 29.7 mn:A 0.1 -0.1 B -0.4 -0.4 gn: 11 11 2011-Dec-16 04:31:28 INFO3 from_mock: From MOCK: b0s1g0 rms:A 27.9 26.7 B 27.6 29.2 mn:A 0.2 -0.4 B -0.4 0.2 gn: 11 11 2011-Dec-16 04:31:28 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.2 28.2 B 32.5 28.5 mn:A 0.7 0.7 B 0.1 -0.1 gn: 7 11 2011-Dec-16 04:31:28 INFO3 from_mock: From MOCK: b1s1g0 rms:A 29.6 27.3 B 30.9 31.0 mn:A -0.2 -0.3 B 0.6 0.1 gn: 8 10 2011-Dec-16 04:31:28 INFO3 from_mock: From MOCK: b2s0g0 rms:A 32.1 31.2 B 27.9 29.2 mn:A 0.0 -0.3 B 0.3 -0.0 gn: 11 11 2011-Dec-16 04:31:28 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.3 29.6 B 32.2 30.0 mn:A 0.1 -0.3 B 0.2 0.2 gn: 11 12 2011-Dec-16 04:31:28 INFO3 from_mock: From MOCK: b3s0g0 rms:A 28.8 28.6 B 30.9 27.5 mn:A 0.4 -0.3 B 0.0 -0.3 gn: 12 12 2011-Dec-16 04:31:28 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.1 29.4 B 29.2 30.4 mn:A -0.3 0.3 B 0.1 0.2 gn: 12 12 2011-Dec-16 04:31:28 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.1 29.2 B 31.0 31.1 mn:A -0.2 -0.3 B -0.4 0.1 gn: 13 12 2011-Dec-16 04:31:28 INFO3 from_mock: From MOCK: b4s1g0 rms:A 32.1 29.1 B 29.8 28.7 mn:A -0.0 0.0 B -0.4 0.2 gn: 16 13 2011-Dec-16 04:31:28 INFO3 from_mock: From MOCK: b5s0g0 rms:A 32.1 30.9 B 29.6 29.6 mn:A 0.5 0.3 B -0.0 0.4 gn: 13 11 2011-Dec-16 04:31:28 INFO3 from_mock: From MOCK: b5s1g0 rms:A 28.8 28.6 B 30.0 29.8 mn:A -0.3 0.3 B -0.1 0.2 gn: 12 11 2011-Dec-16 04:31:28 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.1 29.4 B 14.1 14.6 mn:A -0.5 0.2 B 0.5 -0.5 gn: 13 31 2011-Dec-16 04:31:28 INFO3 from_mock: From MOCK: b6s1g0 rms:A 29.2 26.5 B 11.2 10.8 mn:A 0.7 0.5 B 0.0 0.1 gn: 13 31 2011-Dec-16 04:31:28 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-16 04:31:28 LOG5 end_task: Level: (5) ID = <10127> Status = 0 0 0 0 ok 2011-Dec-16 04:31:28 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-16 04:31:28 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-16 04:31:28 LOG5 finish_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2011-Dec-16 04:31:28 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-16 04:31:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 04:31:28 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-16 04:31:28 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2011-Dec-16 04:31:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-16 04:31:29 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-16 04:31:29 LOG5 finish_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2011-Dec-16 04:31:29 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-16 04:31:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 04:31:29 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-16 04:31:29 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2011-Dec-16 04:31:29 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2011-Dec-16 04:31:29 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2011-Dec-16 04:31:29 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2011-Dec-16 04:31:29 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2011-Dec-16 04:31:29 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-16 04:31:29 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-16 04:31:29 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2011-Dec-16 04:31:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-16 04:31:29 START begin_task: Starting task 'selecting calibration type' 2011-Dec-16 04:31:29 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2011-Dec-16 04:31:29 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-16 04:31:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-16 04:31:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 04:31:29 START begin_task: Starting task 'waiting on setcal' 2011-Dec-16 04:31:29 LOG5 begin_task: Level: (5) ID = <10130> Status = 0 0 0 0 ok 2011-Dec-16 04:31:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2011-Dec-16 04:31:29 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-16 04:31:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 04:31:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:31:29 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-16 04:31:29 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-16 04:31:29 LOG5 end_task: Level: (5) ID = <10130> Status = 0 0 0 0 ok 2011-Dec-16 04:31:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-16 04:31:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-16 04:31:29 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-16 04:31:29 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-16 04:31:29 LOG5 begin_task: Level: (5) ID = <10131> Status = 0 0 0 0 ok 2011-Dec-16 04:31:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:31:29 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-16 04:31:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-16 04:31:29 LOG5 end_task: Level: (5) ID = <10131> Status = 0 0 0 0 ok 2011-Dec-16 04:31:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-16 04:31:29 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-16 04:31:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-16 04:31:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-16 04:31:29 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-16 04:31:29 LOG5 begin_task: Level: (5) ID = <10132> Status = 0 0 0 0 ok 2011-Dec-16 04:31:29 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-16 04:31:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-16 04:31:29 LOG5 end_task: Level: (5) ID = <10132> Status = 0 0 0 0 ok 2011-Dec-16 04:31:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-16 04:31:29 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-16 04:31:29 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-16 04:31:29 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2011-Dec-16 04:31:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-16 04:31:29 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-16 04:31:29 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-16 04:31:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-16 04:31:29 LOG5 begin_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2011-Dec-16 04:31:29 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-16 04:31:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-16 04:31:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-16 04:31:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-16 04:31:29 LOG5 end_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2011-Dec-16 04:31:29 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-16 04:31:29 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-16 04:31:29 LOG5 begin_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2011-Dec-16 04:31:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-16 04:31:29 LOG5 log_alfabeam: Parameters: 9.8676944444444441 19.879638888888891 9.717089 2011.9587639427587 -35.300056 2011-Dec-16 04:31:29 LOG4 log_alfabeam: ALFABEAM 0 9.867694444444437 19.879638888888891 2011-Dec-16 04:31:29 LOG4 log_alfabeam: ALFABEAM 1 9.868042800792960 19.786122447374190 2011-Dec-16 04:31:29 LOG4 log_alfabeam: ALFABEAM 2 9.874213605667100 19.847519991894519 2011-Dec-16 04:31:29 LOG4 log_alfabeam: ALFABEAM 3 9.873727978365435 19.943781762702326 2011-Dec-16 04:31:29 LOG4 log_alfabeam: ALFABEAM 4 9.867090921714793 19.974098930854009 2011-Dec-16 04:31:29 LOG4 log_alfabeam: ALFABEAM 5 9.861178278575343 19.907759817722479 2011-Dec-16 04:31:29 LOG4 log_alfabeam: ALFABEAM 6 9.861639275751466 19.815992637362204 2011-Dec-16 04:31:30 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-16 04:31:30 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-16 04:31:30 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-16 04:31:30 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_161 2011-Dec-16 04:31:30 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-16 04:31:30 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-16 04:31:30 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-16 04:31:30 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-16 04:31:30 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-16 04:31:30 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-16 04:31:30 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-16 04:31:30 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-16 04:31:30 LOG3 take_mock_data: PSET configuration: patternid=135000006 2011-Dec-16 04:31:30 LOG3 take_mock_data: PSET configuration: scanid=135000007 2011-Dec-16 04:31:30 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-16 04:31:30 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-16 04:31:30 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-16 04:31:30 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456362794.0 2011-Dec-16 04:31:30 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306362794.0 2011-Dec-16 04:31:30 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-16 04:31:30 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-16 04:31:30 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_161:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=135000006:scanid=135000007:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456362794.0:topobfreqhz=1306362794.0:filetype=1 2011-Dec-16 04:31:30 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-16 04:31:30 LOG5 begin_task: Level: (5) ID = <10135> Status = 0 0 0 0 ok 2011-Dec-16 04:31:30 LOG4 from_mock: From MOCK: psetok 2011-Dec-16 04:31:30 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-16 04:31:30 LOG5 end_task: Level: (5) ID = <10135> Status = 0 0 0 0 ok 2011-Dec-16 04:31:30 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-16 04:31:30 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-16 04:31:30 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-16 04:31:30 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-16 04:31:30 LOG5 begin_task: Level: (5) ID = <10136> Status = 0 0 0 0 ok 2011-Dec-16 04:31:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20111216.a2048.0002.fits 2011-Dec-16 04:31:30 LOG4 from_mock: From MOCK: starok 2011-Dec-16 04:31:30 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-16 04:31:30 LOG5 end_task: Level: (5) ID = <10136> Status = 0 0 0 0 ok 2011-Dec-16 04:31:30 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-16 04:31:30 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135000007 2011-Dec-16 04:31:30 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-16 04:31:30 LOG5 begin_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2011-Dec-16 04:31:30 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111216.a2048.0002.fits} 2011-Dec-16 04:31:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 04:31:30 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-16 04:31:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-16 04:31:30 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-16 04:31:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30691.00 2011-Dec-16 04:31:32 INFO2 got_mock_message: Mock spectrometer start file number is 00600 2011-Dec-16 04:31:32 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-16 04:31:32 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-16 04:31:32 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-16 04:31:32 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-16 04:31:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-16 04:31:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-16 04:31:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-16 04:31:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-16 04:31:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-16 04:31:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-16 04:31:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-16 04:31:32 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-16 04:31:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:31:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:31:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:31:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:31:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:31:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:31:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:31:35 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:31:35.01 2011-Dec-16 04:31:35 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324024295.01 Fri Dec 16 04:31:35 2011 2011-Dec-16 04:31:35 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-16 04:31:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.362794 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 04:31:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.362794 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 04:31:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.362794 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 04:31:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.362794 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 04:31:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.362794 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 04:31:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.362794 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 04:31:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.362794 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 04:31:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.362794 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 04:31:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.362794 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 04:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 04:31:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 04:31:40 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-16 04:31:41 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-16 04:31:41 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-16 04:31:41 LOG5 end_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2011-Dec-16 04:31:41 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-16 04:31:41 LOG5 end_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2011-Dec-16 04:31:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-16 04:31:41 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-16 04:31:41 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-16 04:31:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-16 04:31:41 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2011-Dec-16 04:31:41 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-16 04:31:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-16 04:31:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-16 04:31:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-16 04:31:41 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2011-Dec-16 04:31:41 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-16 04:31:41 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-16 04:31:41 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2011-Dec-16 04:31:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-16 04:31:41 LOG5 log_alfabeam: Parameters: 9.8676944444444441 19.879638888888891 9.720153 2011.9587642913275 -35.300056 2011-Dec-16 04:31:41 LOG4 log_alfabeam: ALFABEAM 0 9.867694444444430 19.879638888888891 2011-Dec-16 04:31:41 LOG4 log_alfabeam: ALFABEAM 1 9.868099787013380 19.786176462444619 2011-Dec-16 04:31:41 LOG4 log_alfabeam: ALFABEAM 2 9.874233545040793 19.848309230531523 2011-Dec-16 04:31:41 LOG4 log_alfabeam: ALFABEAM 3 9.873687261178153 19.944537105755472 2011-Dec-16 04:31:41 LOG4 log_alfabeam: ALFABEAM 4 9.867029814403699 19.974025370032752 2011-Dec-16 04:31:41 LOG4 log_alfabeam: ALFABEAM 5 9.861160985059490 19.906917508126341 2011-Dec-16 04:31:41 LOG4 log_alfabeam: ALFABEAM 6 9.861679312661840 19.815241900239897 2011-Dec-16 04:31:41 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-16 04:31:41 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-16 04:31:41 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-16 04:31:41 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_161 2011-Dec-16 04:31:41 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-16 04:31:41 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-16 04:31:41 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-16 04:31:41 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-16 04:31:41 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-16 04:31:41 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-16 04:31:41 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-16 04:31:41 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-16 04:31:41 LOG3 take_mock_data: PSET configuration: patternid=135000006 2011-Dec-16 04:31:41 LOG3 take_mock_data: PSET configuration: scanid=135000008 2011-Dec-16 04:31:41 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-16 04:31:41 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-16 04:31:41 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-16 04:31:41 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456362794.0 2011-Dec-16 04:31:41 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306362794.0 2011-Dec-16 04:31:41 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-16 04:31:41 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-16 04:31:41 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_161:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=135000006:scanid=135000008:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456362794.0:topobfreqhz=1306362794.0:filetype=1 2011-Dec-16 04:31:41 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-16 04:31:41 LOG5 begin_task: Level: (5) ID = <10140> Status = 0 0 0 0 ok 2011-Dec-16 04:31:41 LOG4 from_mock: From MOCK: psetok 2011-Dec-16 04:31:41 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-16 04:31:41 LOG5 end_task: Level: (5) ID = <10140> Status = 0 0 0 0 ok 2011-Dec-16 04:31:41 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-16 04:31:41 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-16 04:31:41 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-16 04:31:41 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-16 04:31:41 LOG5 begin_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2011-Dec-16 04:31:41 LOG4 from_mock: From MOCK: starok 2011-Dec-16 04:31:41 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-16 04:31:41 LOG5 end_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2011-Dec-16 04:31:41 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-16 04:31:41 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135000008 2011-Dec-16 04:31:41 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-16 04:31:41 LOG5 begin_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2011-Dec-16 04:31:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 04:31:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-16 04:31:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30702.00 2011-Dec-16 04:31:42 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-16 04:31:42 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-16 04:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.528 (still bad) 2011-Dec-16 04:31:43 INFO2 got_mock_message: Mock spectrometer start file number is 00700 2011-Dec-16 04:31:43 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-16 04:31:43 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-16 04:31:43 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-16 04:31:43 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-16 04:31:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-16 04:31:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-16 04:31:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-16 04:31:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-16 04:31:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-16 04:31:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-16 04:31:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-16 04:31:43 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-16 04:31:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:31:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:31:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:31:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:31:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:31:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:31:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:31:45 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:31:46.00 2011-Dec-16 04:31:46 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324024306.00 Fri Dec 16 04:31:46 2011 2011-Dec-16 04:31:46 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-16 04:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.362794 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 04:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.362794 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 04:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.362794 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 04:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.362794 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 04:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.362794 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 04:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.362794 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 04:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.362794 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 04:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.362794 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 04:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.362794 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 04:31:47 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-16 04:31:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 04:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 04:31:51 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-16 04:31:52 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-16 04:31:52 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-16 04:31:52 LOG5 end_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2011-Dec-16 04:31:52 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-16 04:31:52 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2011-Dec-16 04:31:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-16 04:31:52 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-16 04:31:52 LOG5 finish_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2011-Dec-16 04:31:52 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-16 04:31:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 04:31:52 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-16 04:31:52 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2011-Dec-16 04:31:52 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-16 04:31:52 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 237.72 and ZA = 2.78 2011-Dec-16 04:31:52 LOG3 track_source: Calling 'track_source AGES3193_p3_161 237.72 2.7822902473 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-16 04:31:52 START begin_task: Starting task 'sending tracking commands' 2011-Dec-16 04:31:52 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2011-Dec-16 04:31:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_161} INFO {Slewing to source 'AGES3193_p3_161' ...} 2011-Dec-16 04:31:52 INFO1 track_source: Starting to track AGES3193_p3_161 2011-Dec-16 04:31:52 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_161" 2011-Dec-16 04:31:52 LOG3 vw_send: To DATATAKING: set ra 237.72 2011-Dec-16 04:31:52 LOG3 vw_send: To DATATAKING: set dec 2.7822902473 2011-Dec-16 04:31:52 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-16 04:31:52 LOG3 vw_send: To DATATAKING: pnt tr 237.72 2.7822902473 -CF 2011-Dec-16 04:31:52 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 04:31:52 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-16 04:31:52 LOG5 finish_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2011-Dec-16 04:31:52 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-16 04:31:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 04:31:52 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-16 04:31:52 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2011-Dec-16 04:31:52 LOG1 fixed_driftmap: Parameters: HA = -00:10:00.1 Start = 09:43:41.4 LST = 09:43:23.6 diff = 17.9 secs 2011-Dec-16 04:31:52 INFO2 fixed_driftmap: Waiting 15.9 seconds for RA 9:53:42 2011-Dec-16 04:31:52 INFO2 lstwait: Waiting for 15.8 secs from LST 09:43:24 to LST 09:43:39 ... 2011-Dec-16 04:31:52 LOG4 send_obs_status: To obs_status: <1> TASKTIME 15.815275544639318 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-16 04:31:52 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-16 04:31:52 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2011-Dec-16 04:31:52 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_161" 2011-Dec-16 04:31:52 LOG4 got_cormsg: From DATATAKING: set ra 237.72 2011-Dec-16 04:31:52 LOG4 got_cormsg: From DATATAKING: set dec 2.7822902473 2011-Dec-16 04:31:52 LOG4 got_cormsg: From DATATAKING: vw% 237.72 2011-Dec-16 04:31:52 LOG4 got_cormsg: From DATATAKING: vw% 2.7822902473 2011-Dec-16 04:31:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:31:52 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-16 04:31:52 LOG4 got_cormsg: From DATATAKING: pnt tr 237.72 2.7822902473 -CF 2011-Dec-16 04:31:52 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 04:31:52 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-16 04:31:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 04:32:08 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-16 04:32:08 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2011-Dec-16 04:32:08 LOG4 lstwait: Finished waiting 1.19 seconds late 2011-Dec-16 04:32:08 INFO3 lstwait: Finished waiting 2011-Dec-16 04:32:08 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-16 04:32:08 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-16 04:32:08 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-16 04:32:08 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-16 04:32:08 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-16 04:32:08 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-16 04:32:08 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2011-Dec-16 04:32:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-16 04:32:08 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-16 04:32:08 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-16 04:32:08 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-16 04:32:08 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-16 04:32:08 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_161 2011-Dec-16 04:32:08 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-16 04:32:08 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-16 04:32:08 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-16 04:32:08 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-16 04:32:08 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-16 04:32:08 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-16 04:32:08 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-16 04:32:08 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-16 04:32:08 LOG3 take_mock_data: PSET configuration: patternid=135000009 2011-Dec-16 04:32:08 LOG3 take_mock_data: PSET configuration: scanid=135000009 2011-Dec-16 04:32:08 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-16 04:32:08 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-16 04:32:08 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-16 04:32:08 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456362794.0 2011-Dec-16 04:32:08 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306362794.0 2011-Dec-16 04:32:08 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-16 04:32:08 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-16 04:32:08 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_161:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=135000009:scanid=135000009:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456362794.0:topobfreqhz=1306362794.0:filetype=1 2011-Dec-16 04:32:08 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-16 04:32:08 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2011-Dec-16 04:32:08 LOG4 from_mock: From MOCK: psetok 2011-Dec-16 04:32:08 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-16 04:32:08 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2011-Dec-16 04:32:08 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-16 04:32:08 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-16 04:32:08 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-16 04:32:08 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-16 04:32:08 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2011-Dec-16 04:32:08 LOG4 from_mock: From MOCK: starok 2011-Dec-16 04:32:08 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-16 04:32:08 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2011-Dec-16 04:32:08 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-16 04:32:08 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 135000009 2011-Dec-16 04:32:09 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-16 04:32:09 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2011-Dec-16 04:32:09 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-16 04:32:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 04:32:09 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-16 04:32:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-16 04:32:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30730.00 2011-Dec-16 04:32:10 INFO2 got_mock_message: Mock spectrometer start file number is 00800 2011-Dec-16 04:32:10 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-16 04:32:10 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2011-Dec-16 04:32:10 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-16 04:32:10 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-16 04:32:10 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-16 04:32:10 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-16 04:32:10 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-16 04:32:10 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-16 04:32:10 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-16 04:32:10 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-16 04:32:10 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-16 04:32:10 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-16 04:32:10 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 04:32:10 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 04:32:10 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 04:32:10 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 04:32:10 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 04:32:10 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 04:32:10 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 04:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.362794 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 04:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.362794 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 04:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.362794 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 04:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.362794 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 04:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.362794 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 04:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.362794 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 04:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.362794 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 04:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.362794 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 04:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.362794 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 04:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:32:12 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:32:13.00 2011-Dec-16 04:32:13 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324024333.00 Fri Dec 16 04:32:13 2011 2011-Dec-16 04:32:13 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-16 04:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 04:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 04:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 04:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:32:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:32:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.082 1.027 1.119 0.893 2011-Dec-16 04:32:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.902 0.961 1.027 1.084 2011-Dec-16 04:32:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.813 1.063 0.896 1.026 2011-Dec-16 04:32:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.054 0.014 0.919 0.014 2011-Dec-16 04:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 04:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 04:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 04:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 04:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 04:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 04:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 04:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 04:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 04:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 04:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 04:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 04:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 04:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 04:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 04:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 04:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 04:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 04:33:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:33:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.082 1.026 1.119 0.891 2011-Dec-16 04:33:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.899 0.961 1.030 1.085 2011-Dec-16 04:33:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.812 1.062 0.897 1.026 2011-Dec-16 04:33:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.055 0.014 0.920 0.014 2011-Dec-16 04:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 04:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 04:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 04:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 04:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 04:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 04:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 04:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 04:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 04:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 04:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 04:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 04:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:34:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:34:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 1.033 1.121 0.893 2011-Dec-16 04:34:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.899 0.961 1.030 1.086 2011-Dec-16 04:34:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.814 1.062 0.897 1.027 2011-Dec-16 04:34:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.057 0.014 0.923 0.014 2011-Dec-16 04:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 04:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 04:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 04:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 04:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 04:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:35:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:35:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 1.029 1.123 0.895 2011-Dec-16 04:35:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.905 0.965 1.037 1.093 2011-Dec-16 04:35:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.818 1.071 0.898 1.031 2011-Dec-16 04:35:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 0.014 0.924 0.014 2011-Dec-16 04:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:36:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:36:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.083 1.026 1.121 0.894 2011-Dec-16 04:36:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.903 0.964 1.036 1.089 2011-Dec-16 04:36:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.816 1.064 0.904 1.034 2011-Dec-16 04:36:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.014 0.927 0.014 2011-Dec-16 04:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:37:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:37:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.087 1.030 1.123 0.894 2011-Dec-16 04:37:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.903 0.963 1.035 1.089 2011-Dec-16 04:37:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.092 0.909 1.038 2011-Dec-16 04:37:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.014 0.928 0.014 2011-Dec-16 04:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 04:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:38:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:38:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 1.026 1.122 0.894 2011-Dec-16 04:38:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.905 0.965 1.034 1.087 2011-Dec-16 04:38:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.814 1.066 0.901 1.034 2011-Dec-16 04:38:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.061 0.014 0.926 0.014 2011-Dec-16 04:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:39:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:39:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.088 1.032 1.126 0.897 2011-Dec-16 04:39:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.905 0.966 1.036 1.090 2011-Dec-16 04:39:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.818 1.072 0.901 1.034 2011-Dec-16 04:39:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.014 0.927 0.014 2011-Dec-16 04:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:39:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:40:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:40:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.091 1.038 1.125 0.897 2011-Dec-16 04:40:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.904 0.967 1.035 1.089 2011-Dec-16 04:40:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.817 1.068 0.901 1.035 2011-Dec-16 04:40:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.014 0.927 0.014 2011-Dec-16 04:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.170 (still bad) 2011-Dec-16 04:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.230 (still bad) 2011-Dec-16 04:41:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:41:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.098 1.041 1.129 0.901 2011-Dec-16 04:41:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.194 1.270 1.042 1.097 2011-Dec-16 04:41:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.817 1.073 0.901 1.031 2011-Dec-16 04:41:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.014 0.926 0.014 2011-Dec-16 04:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.287 (still bad) 2011-Dec-16 04:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.276 (still bad) 2011-Dec-16 04:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.216 (still bad) 2011-Dec-16 04:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.162 (still bad) 2011-Dec-16 04:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-16 04:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-16 04:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.178 (still bad) 2011-Dec-16 04:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.244 (still bad) 2011-Dec-16 04:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.317 (still bad) 2011-Dec-16 04:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.382 (still bad) 2011-Dec-16 04:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.427 (still bad) 2011-Dec-16 04:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.440 (still bad) 2011-Dec-16 04:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.398 (still bad) 2011-Dec-16 04:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.340 (still bad) 2011-Dec-16 04:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.267 (still bad) 2011-Dec-16 04:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.201 (still bad) 2011-Dec-16 04:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-16 04:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-16 04:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-16 04:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-16 04:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-16 04:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:42:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:42:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.084 1.033 1.123 0.897 2011-Dec-16 04:42:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.905 0.965 1.036 1.089 2011-Dec-16 04:42:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.816 1.069 0.902 1.038 2011-Dec-16 04:42:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.069 0.014 0.934 0.014 2011-Dec-16 04:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-16 04:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-16 04:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 04:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 04:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 04:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-16 04:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-16 04:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-16 04:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-16 04:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-16 04:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2011-Dec-16 04:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-16 04:43:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:43:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 1.032 1.138 0.908 2011-Dec-16 04:43:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.905 0.965 1.037 1.090 2011-Dec-16 04:43:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.817 1.069 0.902 1.033 2011-Dec-16 04:43:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.014 0.927 0.014 2011-Dec-16 04:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-16 04:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-16 04:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2011-Dec-16 04:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-16 04:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-16 04:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:44:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:44:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.084 1.032 1.126 0.897 2011-Dec-16 04:44:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.906 0.967 1.037 1.090 2011-Dec-16 04:44:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.817 1.066 0.900 1.032 2011-Dec-16 04:44:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.061 0.014 0.926 0.014 2011-Dec-16 04:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:45:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:45:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.083 1.034 1.123 0.895 2011-Dec-16 04:45:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.904 0.963 1.037 1.091 2011-Dec-16 04:45:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.819 1.069 0.902 1.032 2011-Dec-16 04:45:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.061 0.014 0.926 0.014 2011-Dec-16 04:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 04:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:46:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:46:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 1.033 1.125 0.898 2011-Dec-16 04:46:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.908 0.965 1.038 1.091 2011-Dec-16 04:46:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.818 1.069 0.902 1.033 2011-Dec-16 04:46:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.063 0.014 0.927 0.014 2011-Dec-16 04:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:47:19 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 04:47:19.298 (seconds: 17239.298)!} 2011-Dec-16 04:47:19 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 04:47:19.298 (seconds: 17239.298)! 2011-Dec-16 04:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:47:20 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 17238.0 to 17239.0! 2011-Dec-16 04:47:21 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (17238.0 - 17240.0)! 2011-Dec-16 04:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-16 04:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-16 04:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-16 04:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-16 04:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:47:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:47:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.089 1.038 1.126 0.896 2011-Dec-16 04:47:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.907 0.967 1.041 1.095 2011-Dec-16 04:47:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.818 1.068 0.903 1.034 2011-Dec-16 04:47:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.063 0.014 0.927 0.014 2011-Dec-16 04:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-16 04:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-16 04:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-16 04:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-16 04:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-16 04:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-16 04:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-16 04:48:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:48:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.087 1.035 1.130 0.899 2011-Dec-16 04:48:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.907 0.965 1.037 1.090 2011-Dec-16 04:48:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.819 1.067 0.902 1.035 2011-Dec-16 04:48:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.014 0.927 0.014 2011-Dec-16 04:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-16 04:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-16 04:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-16 04:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-16 04:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-16 04:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-16 04:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:49:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:49:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.086 1.034 1.125 0.897 2011-Dec-16 04:49:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.908 0.970 1.040 1.092 2011-Dec-16 04:49:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.820 1.070 0.904 1.034 2011-Dec-16 04:49:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.014 0.929 0.014 2011-Dec-16 04:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-16 04:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-16 04:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:50:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:50:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 1.033 1.125 0.896 2011-Dec-16 04:50:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.909 0.972 1.040 1.093 2011-Dec-16 04:50:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.824 1.071 0.907 1.039 2011-Dec-16 04:50:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.014 0.928 0.014 2011-Dec-16 04:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 04:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 04:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 04:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-16 04:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 04:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-16 04:51:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:51:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.084 1.036 1.128 0.899 2011-Dec-16 04:51:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 0.976 1.043 1.096 2011-Dec-16 04:51:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.823 1.070 0.905 1.037 2011-Dec-16 04:51:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.014 0.930 0.014 2011-Dec-16 04:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-16 04:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 04:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-16 04:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-16 04:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-16 04:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-16 04:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-16 04:52:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 04:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-16 04:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-16 04:52:14 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-16 04:52:14 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-16 04:52:14 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-16 04:52:14 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2011-Dec-16 04:52:14 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-16 04:52:14 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2011-Dec-16 04:52:14 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-16 04:52:14 LOG5 finish_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2011-Dec-16 04:52:14 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-16 04:52:14 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-16 04:52:14 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-16 04:52:14 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2011-Dec-16 04:52:14 COMMAND run_command_line: EXECUTING command 27: 'ENDIF' 2011-Dec-16 04:52:14 COMMAND run_command_line: EXECUTING command 30: 'IF LSTSLEW(AGES3193_p3_002) < 100941 THEN' 2011-Dec-16 04:52:14 LOG3 is_if_valid: Current source data: up 156.9 5.9 UP - - 71 3.3 2011-Dec-16 04:52:14 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_002) < 100941 2011-Dec-16 04:52:14 INFO5 is_if_valid: Condition parsed as: 10.118589999999999 < 10.161388888888888 2011-Dec-16 04:52:14 COMMAND run_command_line: EXECUTING command 31: 'FIXEDDRIFT az=146.26 alfaangle=50.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_002 ra=95300.00 dec=235130.00' 2011-Dec-16 04:52:14 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-16 04:52:15 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-16 04:52:15 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 146.26 50.3 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_002 95300.00 235130.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-16 04:52:15 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-16 04:52:15 LOG5 begin_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2011-Dec-16 04:52:15 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_161' 2011-Dec-16 04:52:15 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-16 04:52:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_002} 2011-Dec-16 04:52:15 INFO3 fixed_driftmap: Sending telescope to Az = 146.26 and ZA = 6.60 2011-Dec-16 04:52:15 LOG3 track_source: Calling 'track_source AGES3193_p3_002 146.26 6.5997746886 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-16 04:52:15 START begin_task: Starting task 'sending tracking commands' 2011-Dec-16 04:52:15 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2011-Dec-16 04:52:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_002} INFO {Slewing to source 'AGES3193_p3_002' ...} 2011-Dec-16 04:52:15 INFO1 track_source: Starting to track AGES3193_p3_002 2011-Dec-16 04:52:15 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_002" 2011-Dec-16 04:52:15 LOG3 vw_send: To DATATAKING: set ra 146.26 2011-Dec-16 04:52:15 LOG3 vw_send: To DATATAKING: set dec 6.5997746886 2011-Dec-16 04:52:15 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-16 04:52:15 LOG3 vw_send: To DATATAKING: pnt tr 146.26 6.5997746886 -CF 2011-Dec-16 04:52:15 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 04:52:15 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-16 04:52:15 LOG5 finish_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2011-Dec-16 04:52:15 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-16 04:52:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 04:52:15 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-16 04:52:15 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2011-Dec-16 04:52:15 START begin_task: Starting task 'rotate ALFA to +50.3 degrees' 2011-Dec-16 04:52:15 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2011-Dec-16 04:52:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +50.3 degrees ...} 2011-Dec-16 04:52:15 INFO2 rotate_alfa: ALFA commanded to +50.3 degrees 2011-Dec-16 04:52:15 LOG3 sock_errsend: To ALFAMOTOR: POSITION 50.3 REPLY 2011-Dec-16 04:52:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-16 04:52:15 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-16 04:52:15 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2011-Dec-16 04:52:15 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_002" 2011-Dec-16 04:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-16 04:52:15 LOG4 got_cormsg: From DATATAKING: set ra 146.26 2011-Dec-16 04:52:15 LOG4 got_cormsg: From DATATAKING: set dec 6.5997746886 2011-Dec-16 04:52:15 LOG4 got_cormsg: From DATATAKING: vw% 146.26 2011-Dec-16 04:52:15 LOG4 got_cormsg: From DATATAKING: vw% 6.5997746886 2011-Dec-16 04:52:15 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:52:15 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-16 04:52:15 LOG4 got_cormsg: From DATATAKING: pnt tr 146.26 6.5997746886 -CF 2011-Dec-16 04:52:15 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 04:52:15 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-16 04:52:15 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:53:04 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-16 04:53:04 INFO3 alfa_motor: ALFA rotator in-position +50.30 degrees 2011-Dec-16 04:53:04 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-16 04:53:04 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2011-Dec-16 04:53:04 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-16 04:53:04 STOP finish_task: Finishing task 'rotate ALFA to +50.3 degrees' 2011-Dec-16 04:53:04 LOG5 finish_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2011-Dec-16 04:53:04 INFO2 finish_task: DONE finished configuration: rotating ALFA to +50.3 degrees 2011-Dec-16 04:53:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 04:53:04 STOP end_task: Finishing task 'rotate ALFA to +50.3 degrees' with status 'OK' 2011-Dec-16 04:53:04 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2011-Dec-16 04:53:04 START begin_task: Starting task 'waiting on telescope' 2011-Dec-16 04:53:04 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2011-Dec-16 04:53:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-16 04:53:04 LOG3 waittrk: Start waittrk 5 2011-Dec-16 04:53:04 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-16 04:53:04 LOG5 begin_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2011-Dec-16 04:53:09 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-16 04:53:09 LOG5 end_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2011-Dec-16 04:53:09 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-16 04:53:09 LOG5 begin_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2011-Dec-16 04:56:06 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-16 04:56:06 LOG5 end_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2011-Dec-16 04:56:06 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-16 04:56:06 INFO2 waittrk: Now tracking AGES3193_p3_002 2011-Dec-16 04:56:06 LOG4 waittrk: Current telescope position: Az = 146.01 ZA = 6.61 2011-Dec-16 04:56:06 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-16 04:56:06 LOG5 finish_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2011-Dec-16 04:56:06 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-16 04:56:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 04:56:06 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-16 04:56:06 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2011-Dec-16 04:56:06 START begin_task: Starting task 'selecting calibration type' 2011-Dec-16 04:56:06 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2011-Dec-16 04:56:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-16 04:56:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-16 04:56:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 04:56:06 START begin_task: Starting task 'waiting on setcal' 2011-Dec-16 04:56:06 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2011-Dec-16 04:56:06 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-16 04:56:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 04:56:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:56:07 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-16 04:56:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-16 04:56:07 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2011-Dec-16 04:56:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-16 04:56:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-16 04:56:07 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-16 04:56:07 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-16 04:56:07 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2011-Dec-16 04:56:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:56:08 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-16 04:56:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-16 04:56:08 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2011-Dec-16 04:56:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-16 04:56:08 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-16 04:56:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-16 04:56:08 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-16 04:56:08 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-16 04:56:08 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2011-Dec-16 04:56:08 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-16 04:56:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-16 04:56:08 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2011-Dec-16 04:56:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-16 04:56:08 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-16 04:56:08 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-16 04:56:08 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2011-Dec-16 04:56:08 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Dec-16 04:56:08 INFO2 astwait: Waiting for 57 seconds from 08:56:08 to 08:57:05 UTC ... 2011-Dec-16 04:56:08 LOG4 send_obs_status: To obs_status: <1> TASKTIME 57 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-16 04:56:08 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Dec-16 04:56:08 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2011-Dec-16 04:57:05 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Dec-16 04:57:05 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2011-Dec-16 04:57:05 INFO3 astwait: Finished waiting 2011-Dec-16 04:57:05 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-16 04:57:05 LOG5 dopset_later: Calling 'dopset_later 61.482979098145719' 2011-Dec-16 04:57:05 INFO3 dopset_later: Setting Doppler correction for 04:58:05 (61.5 seconds from now) 2011-Dec-16 04:57:05 LOG5 antvel: Calling 'antvel 146.260000 6.599775 F Heliocentric 61.482979098145719' 2011-Dec-16 04:57:05 LOG2 antvel: Transforming current Az = 146.26 ZA = 6.60 to apparent RA = 09:53:42.0 Dec = +23:47:52.1 2011-Dec-16 04:57:05 LOG2 antvel: Parameters to Doppler: Heliocentric 32285 2011 350 0.0 2011-Dec-16 04:57:05 INFO5 antvel: Computed antenna velocity: -25.23380 km/s 2011-Dec-16 04:57:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-25.2338016279 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-16 04:57:05 INFO4 dopset_gen: New sky frequencies: 1381.359699 1381.359699 1381.359699 1381.359699 1381.359699 1381.359699 1381.359699 1381.359699 1381.359699 2011-Dec-16 04:57:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.359699 sky0=1381.359699 sky1=1381.359699 sky2=1381.359699 sky3=1381.359699 sky4=1381.359699 sky5=1381.359699 sky6=1381.359699 sky7=1381.359699 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-16 04:57:05 LOG2 dopset_gen: Result from 'sky2syn': 1631.359699 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-16 04:57:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631359699.0} 2011-Dec-16 04:57:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 04:57:05 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-16 04:57:05 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-16 04:57:05 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.0 Dec = +23:51:15.5 2011-Dec-16 04:57:05 LOG3 track_source: Calling 'track_source AGES3193_p3_002 095203.0 235115.5 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-16 04:57:05 START begin_task: Starting task 'sending tracking commands' 2011-Dec-16 04:57:05 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2011-Dec-16 04:57:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_002} INFO {Slewing to source 'AGES3193_p3_002' ...} 2011-Dec-16 04:57:05 INFO1 track_source: Starting to track AGES3193_p3_002 2011-Dec-16 04:57:05 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_002" 2011-Dec-16 04:57:05 LOG3 vw_send: To DATATAKING: set ra 095203.0 2011-Dec-16 04:57:05 LOG3 vw_send: To DATATAKING: set dec 235115.5 2011-Dec-16 04:57:05 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-16 04:57:05 LOG3 vw_send: To DATATAKING: pnt tr 095203.0 235115.5 -CJ 2011-Dec-16 04:57:05 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 04:57:05 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-16 04:57:05 LOG5 finish_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2011-Dec-16 04:57:05 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-16 04:57:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 04:57:05 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-16 04:57:05 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2011-Dec-16 04:57:05 START begin_task: Starting task 'waiting on telescope' 2011-Dec-16 04:57:05 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2011-Dec-16 04:57:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-16 04:57:05 LOG3 waittrk: Start waittrk 5 2011-Dec-16 04:57:05 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-16 04:57:05 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2011-Dec-16 04:57:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631359699.0} 2011-Dec-16 04:57:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 04:57:05 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_002" 2011-Dec-16 04:57:05 LOG4 got_cormsg: From DATATAKING: set ra 095203.0 2011-Dec-16 04:57:05 LOG4 got_cormsg: From DATATAKING: set dec 235115.5 2011-Dec-16 04:57:05 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-16 04:57:05 LOG4 got_cormsg: From DATATAKING: vw% 095203.0 2011-Dec-16 04:57:05 LOG4 got_cormsg: From DATATAKING: vw% 235115.5 2011-Dec-16 04:57:05 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:57:05 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-16 04:57:05 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.0 235115.5 -CJ 2011-Dec-16 04:57:05 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 04:57:05 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-16 04:57:05 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:57:10 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-16 04:57:10 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2011-Dec-16 04:57:10 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-16 04:57:10 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2011-Dec-16 04:57:12 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-16 04:57:12 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2011-Dec-16 04:57:12 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-16 04:57:12 INFO2 waittrk: Now tracking AGES3193_p3_002 2011-Dec-16 04:57:12 LOG4 waittrk: Current telescope position: Az = 145.87 ZA = 6.62 2011-Dec-16 04:57:12 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-16 04:57:12 LOG5 finish_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2011-Dec-16 04:57:12 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-16 04:57:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 04:57:12 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-16 04:57:12 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2011-Dec-16 04:57:12 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-16 04:57:12 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2011-Dec-16 04:57:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-16 04:57:12 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-16 04:57:12 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-16 04:57:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-16 04:57:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 04:57:12 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-16 04:57:12 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2011-Dec-16 04:57:12 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-16 04:57:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 04:57:13 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:57:13 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-16 04:57:13 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-16 04:57:13 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2011-Dec-16 04:57:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-16 04:57:13 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-16 04:57:13 LOG5 begin_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2011-Dec-16 04:57:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-16 04:57:13 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-16 04:57:13 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-16 04:57:13 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-16 04:57:13 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-16 04:57:13 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-16 04:57:13 LOG5 begin_task: Level: (5) ID = <10168> Status = 0 0 0 0 ok 2011-Dec-16 04:57:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-16 04:57:13 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:57:13 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 8 6 dB 2011-Dec-16 04:57:13 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 3 dB 2011-Dec-16 04:57:13 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 2 dB 2011-Dec-16 04:57:13 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2011-Dec-16 04:57:13 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-16 04:57:13 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-16 04:57:13 LOG5 end_task: Level: (5) ID = <10168> Status = 0 0 0 0 ok 2011-Dec-16 04:57:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.081 1.073 ALFA beam 1: 0.878 0.929 2011-Dec-16 04:57:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.905 0.987 ALFA beam 3: 1.035 1.104 2011-Dec-16 04:57:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.828 1.087 ALFA beam 5: 0.895 1.055 2011-Dec-16 04:57:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.030 0.014 ALFA beam 7: 0.900 0.014 2011-Dec-16 04:57:13 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-16 04:57:13 LOG5 finish_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2011-Dec-16 04:57:13 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-16 04:57:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 04:57:13 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-16 04:57:13 LOG5 end_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2011-Dec-16 04:57:13 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-16 04:57:13 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2011-Dec-16 04:57:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-16 04:57:13 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-16 04:57:13 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-16 04:57:13 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-16 04:57:13 LOG5 begin_task: Level: (5) ID = <10170> Status = 0 0 0 0 ok 2011-Dec-16 04:57:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:57:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.081 1.073 0.878 0.929 2011-Dec-16 04:57:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.905 0.987 1.035 1.104 2011-Dec-16 04:57:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.828 1.087 0.895 1.055 2011-Dec-16 04:57:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.014 0.900 0.014 2011-Dec-16 04:57:19 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.2 27.4 B 30.4 30.5 mn:A -0.1 -0.2 B -0.5 -0.5 gn: 11 11 2011-Dec-16 04:57:19 INFO3 from_mock: From MOCK: b0s1g0 rms:A 34.6 33.1 B 29.1 30.9 mn:A -0.0 -0.4 B -0.7 -0.0 gn: 12 11 2011-Dec-16 04:57:19 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.3 28.3 B 33.3 29.1 mn:A 0.3 0.7 B 0.1 -0.2 gn: 7 11 2011-Dec-16 04:57:19 INFO3 from_mock: From MOCK: b1s1g0 rms:A 31.8 29.3 B 35.1 35.2 mn:A -0.4 -0.4 B 0.5 0.2 gn: 8 10 2011-Dec-16 04:57:19 INFO3 from_mock: From MOCK: b2s0g0 rms:A 32.3 31.3 B 28.3 29.6 mn:A -0.1 -0.3 B 0.3 -0.0 gn: 11 11 2011-Dec-16 04:57:19 INFO3 from_mock: From MOCK: b2s1g0 rms:A 30.2 30.5 B 30.9 28.7 mn:A 0.2 -0.4 B 0.0 0.1 gn: 11 11 2011-Dec-16 04:57:19 INFO3 from_mock: From MOCK: b3s0g0 rms:A 28.8 28.5 B 31.1 27.7 mn:A 0.4 -0.2 B 0.0 -0.2 gn: 12 12 2011-Dec-16 04:57:19 INFO3 from_mock: From MOCK: b3s1g0 rms:A 32.6 31.9 B 32.4 33.7 mn:A -0.3 0.3 B 0.2 0.2 gn: 12 12 2011-Dec-16 04:57:19 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.3 29.4 B 31.4 31.5 mn:A -0.2 -0.5 B -0.4 -0.0 gn: 13 12 2011-Dec-16 04:57:19 INFO3 from_mock: From MOCK: b4s1g0 rms:A 34.4 31.2 B 31.4 30.2 mn:A -0.0 -0.1 B -0.3 0.2 gn: 16 13 2011-Dec-16 04:57:19 INFO3 from_mock: From MOCK: b5s0g0 rms:A 31.9 30.7 B 30.0 29.9 mn:A 0.5 0.3 B -0.1 0.3 gn: 13 11 2011-Dec-16 04:57:19 INFO3 from_mock: From MOCK: b5s1g0 rms:A 31.6 31.4 B 30.9 30.7 mn:A -0.4 0.2 B -0.1 0.1 gn: 12 11 2011-Dec-16 04:57:19 INFO3 from_mock: From MOCK: b6s0g0 rms:A 31.6 28.9 B 15.3 15.7 mn:A -0.5 0.1 B 0.4 -0.4 gn: 13 31 2011-Dec-16 04:57:19 INFO3 from_mock: From MOCK: b6s1g0 rms:A 33.9 30.8 B 12.3 11.9 mn:A 0.5 0.4 B 0.1 0.1 gn: 14 31 2011-Dec-16 04:57:19 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-16 04:57:19 LOG5 end_task: Level: (5) ID = <10170> Status = 0 0 0 0 ok 2011-Dec-16 04:57:19 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-16 04:57:19 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-16 04:57:19 LOG5 finish_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2011-Dec-16 04:57:19 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-16 04:57:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 04:57:19 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-16 04:57:19 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2011-Dec-16 04:57:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-16 04:57:19 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-16 04:57:19 LOG5 finish_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2011-Dec-16 04:57:19 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-16 04:57:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 04:57:20 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-16 04:57:20 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2011-Dec-16 04:57:20 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2011-Dec-16 04:57:20 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2011-Dec-16 04:57:20 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2011-Dec-16 04:57:20 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2011-Dec-16 04:57:20 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-16 04:57:20 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-16 04:57:20 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2011-Dec-16 04:57:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-16 04:57:20 START begin_task: Starting task 'selecting calibration type' 2011-Dec-16 04:57:20 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2011-Dec-16 04:57:20 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-16 04:57:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-16 04:57:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 04:57:20 START begin_task: Starting task 'waiting on setcal' 2011-Dec-16 04:57:20 LOG5 begin_task: Level: (5) ID = <10173> Status = 0 0 0 0 ok 2011-Dec-16 04:57:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2011-Dec-16 04:57:20 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-16 04:57:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 04:57:20 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:57:20 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-16 04:57:20 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-16 04:57:20 LOG5 end_task: Level: (5) ID = <10173> Status = 0 0 0 0 ok 2011-Dec-16 04:57:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-16 04:57:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-16 04:57:20 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-16 04:57:20 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-16 04:57:20 LOG5 begin_task: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2011-Dec-16 04:57:20 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:57:20 NOTE WAPPDATA-new_file: New FITS file: wapp.20111216.a2048.0003.fits 2011-Dec-16 04:57:20 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111216.a2048.0003.fits} 2011-Dec-16 04:57:21 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-16 04:57:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-16 04:57:21 LOG5 end_task: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2011-Dec-16 04:57:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-16 04:57:21 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-16 04:57:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-16 04:57:21 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-16 04:57:21 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-16 04:57:21 LOG5 begin_task: Level: (5) ID = <10175> Status = 0 0 0 0 ok 2011-Dec-16 04:57:21 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-16 04:57:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-16 04:57:21 LOG5 end_task: Level: (5) ID = <10175> Status = 0 0 0 0 ok 2011-Dec-16 04:57:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-16 04:57:21 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-16 04:57:21 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-16 04:57:21 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2011-Dec-16 04:57:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-16 04:57:21 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-16 04:57:21 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-16 04:57:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-16 04:57:21 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2011-Dec-16 04:57:21 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-16 04:57:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-16 04:57:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-16 04:57:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-16 04:57:21 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2011-Dec-16 04:57:21 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-16 04:57:21 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-16 04:57:21 LOG5 begin_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2011-Dec-16 04:57:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-16 04:57:21 LOG5 log_alfabeam: Parameters: 9.8674999999999997 23.854305555555555 10.149380 2011.9588131226708 50.299931 2011-Dec-16 04:57:21 LOG4 log_alfabeam: ALFABEAM 0 9.867500000000017 23.854305555555566 2011-Dec-16 04:57:21 LOG4 log_alfabeam: ALFABEAM 1 9.869897747825901 23.754725142260792 2011-Dec-16 04:57:21 LOG4 log_alfabeam: ALFABEAM 2 9.874410207556821 23.820937431557127 2011-Dec-16 04:57:21 LOG4 log_alfabeam: ALFABEAM 3 9.872118293505499 23.921018134402754 2011-Dec-16 04:57:21 LOG4 log_alfabeam: ALFABEAM 4 9.865161461168208 23.954309911611553 2011-Dec-16 04:57:21 LOG4 log_alfabeam: ALFABEAM 5 9.860522759084542 23.886349596628232 2011-Dec-16 04:57:21 LOG4 log_alfabeam: ALFABEAM 6 9.862966995730240 23.786855034670488 2011-Dec-16 04:57:21 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-16 04:57:21 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-16 04:57:21 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-16 04:57:21 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_002 2011-Dec-16 04:57:21 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-16 04:57:21 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-16 04:57:21 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-16 04:57:21 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-16 04:57:21 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-16 04:57:21 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-16 04:57:21 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-16 04:57:21 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-16 04:57:21 LOG3 take_mock_data: PSET configuration: patternid=135000009 2011-Dec-16 04:57:21 LOG3 take_mock_data: PSET configuration: scanid=135000010 2011-Dec-16 04:57:21 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-16 04:57:21 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-16 04:57:21 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-16 04:57:21 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456359699.0 2011-Dec-16 04:57:21 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306359699.0 2011-Dec-16 04:57:21 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-16 04:57:21 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-16 04:57:21 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_002:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=135000009:scanid=135000010:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456359699.0:topobfreqhz=1306359699.0:filetype=1 2011-Dec-16 04:57:21 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-16 04:57:21 LOG5 begin_task: Level: (5) ID = <10178> Status = 0 0 0 0 ok 2011-Dec-16 04:57:21 LOG4 from_mock: From MOCK: psetok 2011-Dec-16 04:57:21 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-16 04:57:21 LOG5 end_task: Level: (5) ID = <10178> Status = 0 0 0 0 ok 2011-Dec-16 04:57:22 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-16 04:57:22 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-16 04:57:22 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-16 04:57:22 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-16 04:57:22 LOG5 begin_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2011-Dec-16 04:57:22 LOG4 from_mock: From MOCK: starok 2011-Dec-16 04:57:22 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-16 04:57:22 LOG5 end_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2011-Dec-16 04:57:22 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-16 04:57:22 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135000010 2011-Dec-16 04:57:22 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-16 04:57:22 LOG5 begin_task: Level: (5) ID = <10180> Status = 0 0 0 0 ok 2011-Dec-16 04:57:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 04:57:22 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-16 04:57:22 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-16 04:57:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-16 04:57:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32243.00 2011-Dec-16 04:57:24 INFO2 got_mock_message: Mock spectrometer start file number is 00900 2011-Dec-16 04:57:24 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-16 04:57:24 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-16 04:57:24 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-16 04:57:24 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-16 04:57:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-16 04:57:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-16 04:57:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-16 04:57:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-16 04:57:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-16 04:57:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-16 04:57:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-16 04:57:24 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-16 04:57:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:57:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:57:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:57:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:57:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:57:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:57:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:57:27 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:57:27.02 2011-Dec-16 04:57:27 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324025847.02 Fri Dec 16 04:57:27 2011 2011-Dec-16 04:57:27 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-16 04:57:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.359699 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 04:57:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.359699 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 04:57:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.359699 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 04:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.538 (still bad) 2011-Dec-16 04:57:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.359699 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 04:57:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.359699 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 04:57:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.359699 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 04:57:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.359699 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 04:57:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.359699 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 04:57:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.359699 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 04:57:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 04:57:32 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-16 04:57:33 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-16 04:57:33 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-16 04:57:33 LOG5 end_task: Level: (5) ID = <10180> Status = 0 0 0 0 ok 2011-Dec-16 04:57:33 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-16 04:57:33 LOG5 end_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2011-Dec-16 04:57:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-16 04:57:33 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-16 04:57:33 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-16 04:57:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-16 04:57:33 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2011-Dec-16 04:57:33 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-16 04:57:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-16 04:57:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-16 04:57:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-16 04:57:33 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2011-Dec-16 04:57:33 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-16 04:57:33 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-16 04:57:33 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2011-Dec-16 04:57:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-16 04:57:33 LOG5 log_alfabeam: Parameters: 9.8674999999999997 23.854305555555555 10.152444 2011.9588134712399 50.299931 2011-Dec-16 04:57:33 LOG4 log_alfabeam: ALFABEAM 0 9.867499999999994 23.854305555555555 2011-Dec-16 04:57:33 LOG4 log_alfabeam: ALFABEAM 1 9.869937046239460 23.754904696127547 2011-Dec-16 04:57:33 LOG4 log_alfabeam: ALFABEAM 2 9.874423463354896 23.821455840643544 2011-Dec-16 04:57:33 LOG4 log_alfabeam: ALFABEAM 3 9.872091619512867 23.921363059340258 2011-Dec-16 04:57:33 LOG4 log_alfabeam: ALFABEAM 4 9.865121702838364 23.954133140657547 2011-Dec-16 04:57:33 LOG4 log_alfabeam: ALFABEAM 5 9.860510285278428 23.885830893609377 2011-Dec-16 04:57:33 LOG4 log_alfabeam: ALFABEAM 6 9.862993644352725 23.786519095911618 2011-Dec-16 04:57:33 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-16 04:57:33 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-16 04:57:33 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-16 04:57:33 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_002 2011-Dec-16 04:57:33 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-16 04:57:33 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-16 04:57:33 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-16 04:57:33 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-16 04:57:33 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-16 04:57:33 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-16 04:57:33 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-16 04:57:33 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-16 04:57:33 LOG3 take_mock_data: PSET configuration: patternid=135000009 2011-Dec-16 04:57:33 LOG3 take_mock_data: PSET configuration: scanid=135000011 2011-Dec-16 04:57:33 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-16 04:57:33 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-16 04:57:33 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-16 04:57:33 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456359699.0 2011-Dec-16 04:57:33 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306359699.0 2011-Dec-16 04:57:33 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-16 04:57:33 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-16 04:57:33 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_002:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=135000009:scanid=135000011:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456359699.0:topobfreqhz=1306359699.0:filetype=1 2011-Dec-16 04:57:33 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-16 04:57:33 LOG5 begin_task: Level: (5) ID = <10183> Status = 0 0 0 0 ok 2011-Dec-16 04:57:33 LOG4 from_mock: From MOCK: psetok 2011-Dec-16 04:57:33 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-16 04:57:33 LOG5 end_task: Level: (5) ID = <10183> Status = 0 0 0 0 ok 2011-Dec-16 04:57:33 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-16 04:57:33 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-16 04:57:33 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-16 04:57:33 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-16 04:57:33 LOG5 begin_task: Level: (5) ID = <10184> Status = 0 0 0 0 ok 2011-Dec-16 04:57:33 LOG4 from_mock: From MOCK: starok 2011-Dec-16 04:57:33 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-16 04:57:33 LOG5 end_task: Level: (5) ID = <10184> Status = 0 0 0 0 ok 2011-Dec-16 04:57:33 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-16 04:57:33 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135000011 2011-Dec-16 04:57:33 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-16 04:57:33 LOG5 begin_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2011-Dec-16 04:57:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 04:57:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-16 04:57:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32254.00 2011-Dec-16 04:57:34 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-16 04:57:34 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-16 04:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.538 (still bad) 2011-Dec-16 04:57:36 INFO2 got_mock_message: Mock spectrometer start file number is 01000 2011-Dec-16 04:57:36 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-16 04:57:36 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-16 04:57:36 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-16 04:57:36 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-16 04:57:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-16 04:57:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-16 04:57:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-16 04:57:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-16 04:57:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-16 04:57:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-16 04:57:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-16 04:57:36 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-16 04:57:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:57:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:57:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:57:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:57:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:57:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:57:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 04:57:39 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:57:39.02 2011-Dec-16 04:57:39 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324025859.02 Fri Dec 16 04:57:39 2011 2011-Dec-16 04:57:39 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-16 04:57:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.359699 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 04:57:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.359699 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 04:57:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.359699 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 04:57:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.359699 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 04:57:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.359699 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 04:57:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.359699 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 04:57:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.359699 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 04:57:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.359699 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 04:57:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.359699 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 04:57:39 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-16 04:57:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 04:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 04:57:44 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-16 04:57:45 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-16 04:57:45 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-16 04:57:45 LOG5 end_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2011-Dec-16 04:57:45 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-16 04:57:45 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2011-Dec-16 04:57:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-16 04:57:45 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-16 04:57:45 LOG5 finish_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2011-Dec-16 04:57:45 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-16 04:57:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 04:57:45 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-16 04:57:45 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2011-Dec-16 04:57:45 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-16 04:57:45 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 146.26 and ZA = 6.60 2011-Dec-16 04:57:45 LOG3 track_source: Calling 'track_source AGES3193_p3_002 146.26 6.5997746886 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-16 04:57:45 START begin_task: Starting task 'sending tracking commands' 2011-Dec-16 04:57:45 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2011-Dec-16 04:57:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_002} INFO {Slewing to source 'AGES3193_p3_002' ...} 2011-Dec-16 04:57:45 INFO1 track_source: Starting to track AGES3193_p3_002 2011-Dec-16 04:57:45 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_002" 2011-Dec-16 04:57:45 LOG3 vw_send: To DATATAKING: set ra 146.26 2011-Dec-16 04:57:45 LOG3 vw_send: To DATATAKING: set dec 6.5997746886 2011-Dec-16 04:57:45 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-16 04:57:45 LOG3 vw_send: To DATATAKING: pnt tr 146.26 6.5997746886 -CF 2011-Dec-16 04:57:45 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 04:57:45 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-16 04:57:45 LOG5 finish_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2011-Dec-16 04:57:45 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-16 04:57:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 04:57:45 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-16 04:57:45 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2011-Dec-16 04:57:45 LOG1 fixed_driftmap: Parameters: HA = +00:16:00.2 Start = 10:09:42.4 LST = 10:09:20.8 diff = 21.5 secs 2011-Dec-16 04:57:45 INFO2 fixed_driftmap: Waiting 19.5 seconds for RA 9:53:42 2011-Dec-16 04:57:45 INFO2 lstwait: Waiting for 19.5 secs from LST 10:09:21 to LST 10:09:40 ... 2011-Dec-16 04:57:45 LOG4 send_obs_status: To obs_status: <1> TASKTIME 19.486759518627057 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-16 04:57:45 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-16 04:57:45 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2011-Dec-16 04:57:45 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_002" 2011-Dec-16 04:57:45 LOG4 got_cormsg: From DATATAKING: set ra 146.26 2011-Dec-16 04:57:45 LOG4 got_cormsg: From DATATAKING: set dec 6.5997746886 2011-Dec-16 04:57:45 LOG4 got_cormsg: From DATATAKING: vw% 146.26 2011-Dec-16 04:57:45 LOG4 got_cormsg: From DATATAKING: vw% 6.5997746886 2011-Dec-16 04:57:45 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:57:45 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-16 04:57:45 LOG4 got_cormsg: From DATATAKING: pnt tr 146.26 6.5997746886 -CF 2011-Dec-16 04:57:45 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 04:57:45 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-16 04:57:45 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 04:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 04:58:05 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-16 04:58:05 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2011-Dec-16 04:58:05 LOG4 lstwait: Finished waiting 0.51 seconds late 2011-Dec-16 04:58:05 INFO3 lstwait: Finished waiting 2011-Dec-16 04:58:05 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-16 04:58:05 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-16 04:58:05 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-16 04:58:05 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-16 04:58:05 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-16 04:58:05 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-16 04:58:05 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2011-Dec-16 04:58:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-16 04:58:05 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-16 04:58:05 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-16 04:58:05 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-16 04:58:05 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-16 04:58:05 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_002 2011-Dec-16 04:58:05 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-16 04:58:05 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-16 04:58:05 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-16 04:58:05 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-16 04:58:05 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-16 04:58:05 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-16 04:58:05 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-16 04:58:05 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-16 04:58:05 LOG3 take_mock_data: PSET configuration: patternid=135000012 2011-Dec-16 04:58:05 LOG3 take_mock_data: PSET configuration: scanid=135000012 2011-Dec-16 04:58:05 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-16 04:58:05 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-16 04:58:05 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-16 04:58:05 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456359699.0 2011-Dec-16 04:58:05 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306359699.0 2011-Dec-16 04:58:05 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-16 04:58:05 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-16 04:58:05 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_002:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=135000012:scanid=135000012:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456359699.0:topobfreqhz=1306359699.0:filetype=1 2011-Dec-16 04:58:05 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-16 04:58:05 LOG5 begin_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2011-Dec-16 04:58:05 LOG4 from_mock: From MOCK: psetok 2011-Dec-16 04:58:05 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-16 04:58:05 LOG5 end_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2011-Dec-16 04:58:05 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-16 04:58:05 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-16 04:58:05 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-16 04:58:05 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-16 04:58:05 LOG5 begin_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2011-Dec-16 04:58:05 LOG4 from_mock: From MOCK: starok 2011-Dec-16 04:58:05 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-16 04:58:05 LOG5 end_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2011-Dec-16 04:58:05 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-16 04:58:05 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 135000012 2011-Dec-16 04:58:05 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-16 04:58:05 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2011-Dec-16 04:58:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 04:58:05 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-16 04:58:05 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-16 04:58:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-16 04:58:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32286.00 2011-Dec-16 04:58:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.359699 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 04:58:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.359699 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 04:58:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.359699 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 04:58:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.359699 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 04:58:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.359699 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 04:58:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.359699 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 04:58:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.359699 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 04:58:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.359699 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 04:58:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.359699 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 04:58:07 INFO2 got_mock_message: Mock spectrometer start file number is 01100 2011-Dec-16 04:58:07 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-16 04:58:07 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2011-Dec-16 04:58:07 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-16 04:58:07 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-16 04:58:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-16 04:58:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-16 04:58:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-16 04:58:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-16 04:58:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-16 04:58:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-16 04:58:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-16 04:58:07 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-16 04:58:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 04:58:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 04:58:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 04:58:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 04:58:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 04:58:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 04:58:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 04:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 04:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 04:58:10 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:58:10.01 2011-Dec-16 04:58:10 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324025890.01 Fri Dec 16 04:58:10 2011 2011-Dec-16 04:58:10 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-16 04:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 04:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 04:58:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:58:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.070 1.057 0.882 0.932 2011-Dec-16 04:58:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.910 0.988 1.033 1.102 2011-Dec-16 04:58:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.830 1.091 0.895 1.056 2011-Dec-16 04:58:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.014 0.899 0.014 2011-Dec-16 04:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 04:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 04:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 04:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 04:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 04:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 04:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 04:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 04:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 04:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 04:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 04:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 04:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 04:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 04:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 04:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 04:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 04:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 04:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 04:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 04:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 04:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 04:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 04:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 04:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 04:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 04:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 04:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 04:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 04:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 04:59:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 04:59:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.057 0.883 0.931 2011-Dec-16 04:59:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.908 0.987 1.031 1.102 2011-Dec-16 04:59:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.830 1.091 0.895 1.057 2011-Dec-16 04:59:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.035 0.014 0.902 0.014 2011-Dec-16 04:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 04:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 04:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 04:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 04:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 04:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 04:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 04:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 04:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 04:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 04:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 04:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 04:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 04:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 04:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 04:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 04:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 04:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 04:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 04:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:00:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:00:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.061 0.882 0.931 2011-Dec-16 05:00:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.910 0.986 1.035 1.104 2011-Dec-16 05:00:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.092 0.894 1.054 2011-Dec-16 05:00:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.034 0.014 0.902 0.014 2011-Dec-16 05:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:01:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:01:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.065 0.886 0.932 2011-Dec-16 05:01:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.911 0.990 1.034 1.103 2011-Dec-16 05:01:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.830 1.093 0.894 1.056 2011-Dec-16 05:01:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.031 0.014 0.899 0.014 2011-Dec-16 05:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-16 05:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-16 05:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 05:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 05:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-16 05:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 05:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 05:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-16 05:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-16 05:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 05:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 05:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:02:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:02:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 1.062 0.884 0.932 2011-Dec-16 05:02:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.909 0.986 1.033 1.104 2011-Dec-16 05:02:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.843 1.117 0.897 1.057 2011-Dec-16 05:02:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.034 0.014 0.901 0.014 2011-Dec-16 05:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 05:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-16 05:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-16 05:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-16 05:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:03:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:03:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.063 0.885 0.934 2011-Dec-16 05:03:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.911 0.992 1.034 1.104 2011-Dec-16 05:03:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.091 0.896 1.059 2011-Dec-16 05:03:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.033 0.014 0.901 0.014 2011-Dec-16 05:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:04:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:04:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.070 1.061 0.887 0.933 2011-Dec-16 05:04:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.910 0.987 1.034 1.102 2011-Dec-16 05:04:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.828 1.089 0.895 1.056 2011-Dec-16 05:04:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.033 0.014 0.901 0.014 2011-Dec-16 05:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:05:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:05:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.067 1.060 0.885 0.932 2011-Dec-16 05:05:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.910 0.989 1.034 1.101 2011-Dec-16 05:05:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.827 1.088 0.894 1.055 2011-Dec-16 05:05:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.032 0.014 0.899 0.014 2011-Dec-16 05:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 05:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 05:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 05:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 05:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 05:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:06:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:06:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.067 1.061 0.886 0.934 2011-Dec-16 05:06:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.912 0.987 1.035 1.103 2011-Dec-16 05:06:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.828 1.087 0.893 1.053 2011-Dec-16 05:06:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.031 0.014 0.900 0.014 2011-Dec-16 05:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:07:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:07:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:07:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 1.067 0.886 0.932 2011-Dec-16 05:07:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.910 0.988 1.036 1.105 2011-Dec-16 05:07:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.090 0.894 1.057 2011-Dec-16 05:07:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.035 0.014 0.903 0.014 2011-Dec-16 05:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:08:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:08:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.062 0.886 0.932 2011-Dec-16 05:08:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.907 0.989 1.037 1.104 2011-Dec-16 05:08:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.830 1.092 0.896 1.058 2011-Dec-16 05:08:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 0.014 0.904 0.014 2011-Dec-16 05:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-16 05:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-16 05:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 05:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 05:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 05:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-16 05:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-16 05:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:09:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:09:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.065 0.900 0.947 2011-Dec-16 05:09:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.913 0.991 1.040 1.107 2011-Dec-16 05:09:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.095 0.895 1.060 2011-Dec-16 05:09:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.034 0.014 0.902 0.014 2011-Dec-16 05:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:10:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:10:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 1.068 0.890 0.935 2011-Dec-16 05:10:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.912 0.988 1.040 1.105 2011-Dec-16 05:10:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.831 1.100 0.898 1.063 2011-Dec-16 05:10:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 0.014 0.907 0.014 2011-Dec-16 05:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:11:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:11:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.069 1.064 0.887 0.935 2011-Dec-16 05:11:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.909 0.986 1.035 1.104 2011-Dec-16 05:11:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.094 0.896 1.060 2011-Dec-16 05:11:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.035 0.014 0.903 0.014 2011-Dec-16 05:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:12:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:12:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.064 0.886 0.933 2011-Dec-16 05:12:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.911 0.988 1.037 1.104 2011-Dec-16 05:12:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.828 1.091 0.897 1.057 2011-Dec-16 05:12:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.034 0.014 0.903 0.014 2011-Dec-16 05:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-16 05:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 05:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 05:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-16 05:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-16 05:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-16 05:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 05:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 05:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 05:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-16 05:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 05:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 05:13:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:13:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.064 0.891 0.938 2011-Dec-16 05:13:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.911 0.990 1.042 1.108 2011-Dec-16 05:13:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.836 1.109 0.895 1.057 2011-Dec-16 05:13:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.035 0.014 0.903 0.014 2011-Dec-16 05:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 05:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 05:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-16 05:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:14:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:14:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.096 1.088 0.886 0.935 2011-Dec-16 05:14:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.913 0.989 1.036 1.104 2011-Dec-16 05:14:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.094 0.896 1.061 2011-Dec-16 05:14:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 0.014 0.907 0.014 2011-Dec-16 05:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:15:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:15:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:15:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 1.064 0.885 0.934 2011-Dec-16 05:15:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.912 0.991 1.035 1.103 2011-Dec-16 05:15:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.830 1.093 0.897 1.059 2011-Dec-16 05:15:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 0.014 0.906 0.014 2011-Dec-16 05:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:16:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:16:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.061 0.886 0.934 2011-Dec-16 05:16:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.911 0.992 1.041 1.104 2011-Dec-16 05:16:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.830 1.094 0.894 1.061 2011-Dec-16 05:16:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.036 0.014 0.904 0.014 2011-Dec-16 05:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-16 05:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 05:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 05:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 05:17:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:17:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.064 0.885 0.931 2011-Dec-16 05:17:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.909 0.988 1.047 1.113 2011-Dec-16 05:17:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.830 1.095 0.893 1.060 2011-Dec-16 05:17:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.036 0.014 0.905 0.014 2011-Dec-16 05:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-16 05:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:18:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 05:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:18:11 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-16 05:18:11 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-16 05:18:11 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-16 05:18:11 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2011-Dec-16 05:18:11 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-16 05:18:11 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2011-Dec-16 05:18:11 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-16 05:18:11 LOG5 finish_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2011-Dec-16 05:18:11 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-16 05:18:11 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-16 05:18:11 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-16 05:18:11 LOG5 end_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2011-Dec-16 05:18:11 COMMAND run_command_line: EXECUTING command 34: 'ENDIF' 2011-Dec-16 05:18:11 COMMAND run_command_line: EXECUTING command 37: 'IF LSTSLEW(AGES3193_p3_004) < 103311 THEN' 2011-Dec-16 05:18:11 LOG3 is_if_valid: Current source data: up 124.2 10.0 UP - - 45 1.4 2011-Dec-16 05:18:11 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_004) < 103311 2011-Dec-16 05:18:11 INFO5 is_if_valid: Condition parsed as: 10.520607333333334 < 10.553055555555556 2011-Dec-16 05:18:11 COMMAND run_command_line: EXECUTING command 38: 'FIXEDDRIFT az=122.05 alfaangle=76.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_004 ra=95300.00 dec=234830.00' 2011-Dec-16 05:18:11 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-16 05:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:18:12 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-16 05:18:12 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 122.05 76.8 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_004 95300.00 234830.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-16 05:18:12 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-16 05:18:12 LOG5 begin_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2011-Dec-16 05:18:12 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_002' 2011-Dec-16 05:18:12 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-16 05:18:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_004} 2011-Dec-16 05:18:12 INFO3 fixed_driftmap: Sending telescope to Az = 122.05 and ZA = 10.67 2011-Dec-16 05:18:12 LOG3 track_source: Calling 'track_source AGES3193_p3_004 122.05 10.6722801778 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-16 05:18:12 START begin_task: Starting task 'sending tracking commands' 2011-Dec-16 05:18:12 LOG5 begin_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2011-Dec-16 05:18:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_004} INFO {Slewing to source 'AGES3193_p3_004' ...} 2011-Dec-16 05:18:12 INFO1 track_source: Starting to track AGES3193_p3_004 2011-Dec-16 05:18:12 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_004" 2011-Dec-16 05:18:12 LOG3 vw_send: To DATATAKING: set ra 122.05 2011-Dec-16 05:18:12 LOG3 vw_send: To DATATAKING: set dec 10.6722801778 2011-Dec-16 05:18:12 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-16 05:18:12 LOG3 vw_send: To DATATAKING: pnt tr 122.05 10.6722801778 -CF 2011-Dec-16 05:18:12 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 05:18:12 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-16 05:18:12 LOG5 finish_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2011-Dec-16 05:18:12 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-16 05:18:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 05:18:12 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-16 05:18:12 LOG5 end_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2011-Dec-16 05:18:12 START begin_task: Starting task 'rotate ALFA to +76.8 degrees' 2011-Dec-16 05:18:12 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2011-Dec-16 05:18:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +76.8 degrees ...} 2011-Dec-16 05:18:12 INFO2 rotate_alfa: ALFA commanded to +76.8 degrees 2011-Dec-16 05:18:12 LOG3 sock_errsend: To ALFAMOTOR: POSITION 76.8 REPLY 2011-Dec-16 05:18:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-16 05:18:12 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-16 05:18:12 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2011-Dec-16 05:18:12 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_004" 2011-Dec-16 05:18:12 LOG4 got_cormsg: From DATATAKING: set ra 122.05 2011-Dec-16 05:18:12 LOG4 got_cormsg: From DATATAKING: set dec 10.6722801778 2011-Dec-16 05:18:12 LOG4 got_cormsg: From DATATAKING: vw% 122.05 2011-Dec-16 05:18:12 LOG4 got_cormsg: From DATATAKING: vw% 10.6722801778 2011-Dec-16 05:18:12 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 05:18:12 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-16 05:18:12 LOG4 got_cormsg: From DATATAKING: pnt tr 122.05 10.6722801778 -CF 2011-Dec-16 05:18:12 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 05:18:12 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-16 05:18:12 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 05:18:28 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-16 05:18:28 INFO3 alfa_motor: ALFA rotator in-position +76.80 degrees 2011-Dec-16 05:18:28 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-16 05:18:28 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2011-Dec-16 05:18:28 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-16 05:18:28 STOP finish_task: Finishing task 'rotate ALFA to +76.8 degrees' 2011-Dec-16 05:18:28 LOG5 finish_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2011-Dec-16 05:18:28 INFO2 finish_task: DONE finished configuration: rotating ALFA to +76.8 degrees 2011-Dec-16 05:18:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 05:18:28 STOP end_task: Finishing task 'rotate ALFA to +76.8 degrees' with status 'OK' 2011-Dec-16 05:18:28 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2011-Dec-16 05:18:28 START begin_task: Starting task 'waiting on telescope' 2011-Dec-16 05:18:28 LOG5 begin_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2011-Dec-16 05:18:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-16 05:18:28 LOG3 waittrk: Start waittrk 5 2011-Dec-16 05:18:28 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-16 05:18:28 LOG5 begin_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2011-Dec-16 05:18:33 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-16 05:18:33 LOG5 end_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2011-Dec-16 05:18:33 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-16 05:18:33 LOG5 begin_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2011-Dec-16 05:19:59 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-16 05:19:59 LOG5 end_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2011-Dec-16 05:19:59 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-16 05:19:59 INFO2 waittrk: Now tracking AGES3193_p3_004 2011-Dec-16 05:19:59 LOG4 waittrk: Current telescope position: Az = 121.81 ZA = 10.68 2011-Dec-16 05:19:59 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-16 05:19:59 LOG5 finish_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2011-Dec-16 05:19:59 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-16 05:19:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 05:19:59 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-16 05:19:59 LOG5 end_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2011-Dec-16 05:19:59 START begin_task: Starting task 'selecting calibration type' 2011-Dec-16 05:19:59 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2011-Dec-16 05:19:59 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-16 05:19:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-16 05:19:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 05:19:59 START begin_task: Starting task 'waiting on setcal' 2011-Dec-16 05:19:59 LOG5 begin_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2011-Dec-16 05:19:59 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-16 05:19:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 05:20:00 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 05:20:00 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-16 05:20:00 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-16 05:20:00 LOG5 end_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2011-Dec-16 05:20:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-16 05:20:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-16 05:20:00 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-16 05:20:00 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-16 05:20:00 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2011-Dec-16 05:20:00 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-16 05:20:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-16 05:20:00 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2011-Dec-16 05:20:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-16 05:20:00 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-16 05:20:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-16 05:20:00 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-16 05:20:00 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-16 05:20:00 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2011-Dec-16 05:20:00 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 05:20:00 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-16 05:20:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-16 05:20:00 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2011-Dec-16 05:20:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-16 05:20:00 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-16 05:20:00 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-16 05:20:00 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2011-Dec-16 05:20:00 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Dec-16 05:20:00 INFO2 astwait: Waiting for 31 seconds from 09:20:00 to 09:20:31 UTC ... 2011-Dec-16 05:20:01 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-16 05:20:01 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Dec-16 05:20:01 LOG5 begin_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2011-Dec-16 05:20:31 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Dec-16 05:20:31 LOG5 end_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2011-Dec-16 05:20:31 INFO3 astwait: Finished waiting 2011-Dec-16 05:20:31 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-16 05:20:31 LOG5 dopset_later: Calling 'dopset_later 61.262552319223467' 2011-Dec-16 05:20:31 INFO3 dopset_later: Setting Doppler correction for 05:21:31 (61.3 seconds from now) 2011-Dec-16 05:20:31 LOG5 antvel: Calling 'antvel 122.050000 10.672280 F Heliocentric 61.262552319223467' 2011-Dec-16 05:20:31 LOG2 antvel: Transforming current Az = 122.05 ZA = 10.67 to apparent RA = 09:53:42.0 Dec = +23:44:52.1 2011-Dec-16 05:20:31 LOG2 antvel: Parameters to Doppler: Heliocentric 33691 2011 350 0.0 2011-Dec-16 05:20:31 INFO5 antvel: Computed antenna velocity: -25.19685 km/s 2011-Dec-16 05:20:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-25.196845024200002 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-16 05:20:31 INFO4 dopset_gen: New sky frequencies: 1381.359529 1381.359529 1381.359529 1381.359529 1381.359529 1381.359529 1381.359529 1381.359529 1381.359529 2011-Dec-16 05:20:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.359529 sky0=1381.359529 sky1=1381.359529 sky2=1381.359529 sky3=1381.359529 sky4=1381.359529 sky5=1381.359529 sky6=1381.359529 sky7=1381.359529 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-16 05:20:31 LOG2 dopset_gen: Result from 'sky2syn': 1631.359529 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-16 05:20:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631359529.0} 2011-Dec-16 05:20:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 05:20:31 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-16 05:20:31 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-16 05:20:31 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.3 Dec = +23:48:15.5 2011-Dec-16 05:20:31 LOG3 track_source: Calling 'track_source AGES3193_p3_004 095203.3 234815.5 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-16 05:20:31 START begin_task: Starting task 'sending tracking commands' 2011-Dec-16 05:20:31 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2011-Dec-16 05:20:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_004} INFO {Slewing to source 'AGES3193_p3_004' ...} 2011-Dec-16 05:20:31 INFO1 track_source: Starting to track AGES3193_p3_004 2011-Dec-16 05:20:31 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_004" 2011-Dec-16 05:20:31 LOG3 vw_send: To DATATAKING: set ra 095203.3 2011-Dec-16 05:20:31 LOG3 vw_send: To DATATAKING: set dec 234815.5 2011-Dec-16 05:20:31 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-16 05:20:31 LOG3 vw_send: To DATATAKING: pnt tr 095203.3 234815.5 -CJ 2011-Dec-16 05:20:31 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 05:20:31 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-16 05:20:31 LOG5 finish_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2011-Dec-16 05:20:31 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-16 05:20:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 05:20:31 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-16 05:20:31 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2011-Dec-16 05:20:31 START begin_task: Starting task 'waiting on telescope' 2011-Dec-16 05:20:31 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2011-Dec-16 05:20:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-16 05:20:31 LOG3 waittrk: Start waittrk 5 2011-Dec-16 05:20:31 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-16 05:20:31 LOG5 begin_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2011-Dec-16 05:20:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631359529.0} 2011-Dec-16 05:20:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 05:20:31 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_004" 2011-Dec-16 05:20:31 LOG4 got_cormsg: From DATATAKING: set ra 095203.3 2011-Dec-16 05:20:31 LOG4 got_cormsg: From DATATAKING: set dec 234815.5 2011-Dec-16 05:20:31 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-16 05:20:31 LOG4 got_cormsg: From DATATAKING: vw% 095203.3 2011-Dec-16 05:20:31 LOG4 got_cormsg: From DATATAKING: vw% 234815.5 2011-Dec-16 05:20:31 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 05:20:31 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-16 05:20:31 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.3 234815.5 -CJ 2011-Dec-16 05:20:31 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 05:20:31 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-16 05:20:31 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 05:20:36 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-16 05:20:36 LOG5 end_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2011-Dec-16 05:20:36 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-16 05:20:36 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2011-Dec-16 05:20:38 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-16 05:20:38 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2011-Dec-16 05:20:38 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-16 05:20:38 INFO2 waittrk: Now tracking AGES3193_p3_004 2011-Dec-16 05:20:38 LOG4 waittrk: Current telescope position: Az = 121.74 ZA = 10.70 2011-Dec-16 05:20:38 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-16 05:20:38 LOG5 finish_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2011-Dec-16 05:20:38 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-16 05:20:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 05:20:38 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-16 05:20:38 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2011-Dec-16 05:20:38 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-16 05:20:38 LOG5 begin_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2011-Dec-16 05:20:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-16 05:20:38 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-16 05:20:38 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-16 05:20:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-16 05:20:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 05:20:38 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-16 05:20:38 LOG5 begin_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2011-Dec-16 05:20:39 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-16 05:20:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 05:20:39 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 05:20:39 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-16 05:20:39 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-16 05:20:39 LOG5 end_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2011-Dec-16 05:20:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-16 05:20:39 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-16 05:20:39 LOG5 begin_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2011-Dec-16 05:20:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-16 05:20:39 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-16 05:20:39 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-16 05:20:39 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-16 05:20:39 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-16 05:20:39 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-16 05:20:39 LOG5 begin_task: Level: (5) ID = <10211> Status = 0 0 0 0 ok 2011-Dec-16 05:20:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-16 05:20:39 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 05:20:39 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 8 6 dB 2011-Dec-16 05:20:39 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 3 dB 2011-Dec-16 05:20:39 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 2 dB 2011-Dec-16 05:20:39 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2011-Dec-16 05:20:39 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-16 05:20:39 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-16 05:20:39 LOG5 end_task: Level: (5) ID = <10211> Status = 0 0 0 0 ok 2011-Dec-16 05:20:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.102 1.080 ALFA beam 1: 0.914 0.950 2011-Dec-16 05:20:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.955 1.029 ALFA beam 3: 1.068 1.115 2011-Dec-16 05:20:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.838 1.096 ALFA beam 5: 0.907 1.075 2011-Dec-16 05:20:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.048 0.014 ALFA beam 7: 0.912 0.014 2011-Dec-16 05:20:39 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-16 05:20:39 LOG5 finish_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2011-Dec-16 05:20:39 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-16 05:20:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 05:20:39 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-16 05:20:39 LOG5 end_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2011-Dec-16 05:20:40 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-16 05:20:40 LOG5 begin_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2011-Dec-16 05:20:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-16 05:20:40 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-16 05:20:40 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-16 05:20:40 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-16 05:20:40 LOG5 begin_task: Level: (5) ID = <10213> Status = 0 0 0 0 ok 2011-Dec-16 05:20:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:20:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.080 0.914 0.950 2011-Dec-16 05:20:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 1.029 1.068 1.115 2011-Dec-16 05:20:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.838 1.096 0.907 1.075 2011-Dec-16 05:20:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.048 0.014 0.912 0.014 2011-Dec-16 05:20:45 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.5 27.7 B 30.5 30.5 mn:A 0.1 -0.1 B -0.4 -0.4 gn: 11 11 2011-Dec-16 05:20:45 INFO3 from_mock: From MOCK: b0s1g0 rms:A 34.2 32.7 B 28.9 30.5 mn:A 0.1 -0.4 B -0.5 0.2 gn: 12 11 2011-Dec-16 05:20:45 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.9 28.9 B 33.6 29.4 mn:A 0.6 0.7 B 0.1 -0.1 gn: 7 11 2011-Dec-16 05:20:45 INFO3 from_mock: From MOCK: b1s1g0 rms:A 37.3 34.4 B 32.9 33.0 mn:A -0.3 -0.2 B 0.6 0.2 gn: 8 10 2011-Dec-16 05:20:45 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.5 28.6 B 29.0 30.3 mn:A 0.1 -0.2 B 0.3 0.1 gn: 10 11 2011-Dec-16 05:20:45 INFO3 from_mock: From MOCK: b2s1g0 rms:A 33.8 34.1 B 30.8 28.6 mn:A 0.2 -0.4 B 0.1 0.2 gn: 11 11 2011-Dec-16 05:20:45 INFO3 from_mock: From MOCK: b3s0g0 rms:A 29.3 29.1 B 31.3 27.9 mn:A 0.4 -0.2 B 0.0 -0.3 gn: 12 12 2011-Dec-16 05:20:45 INFO3 from_mock: From MOCK: b3s1g0 rms:A 32.3 31.6 B 31.2 32.5 mn:A -0.3 0.3 B 0.2 0.1 gn: 12 12 2011-Dec-16 05:20:45 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.6 29.6 B 31.5 31.6 mn:A -0.3 -0.4 B -0.5 -0.1 gn: 13 12 2011-Dec-16 05:20:45 INFO3 from_mock: From MOCK: b4s1g0 rms:A 33.7 30.6 B 31.1 30.0 mn:A -0.0 -0.1 B -0.4 0.2 gn: 16 13 2011-Dec-16 05:20:45 INFO3 from_mock: From MOCK: b5s0g0 rms:A 32.1 30.9 B 30.2 30.2 mn:A 0.5 0.4 B 0.0 0.3 gn: 13 11 2011-Dec-16 05:20:45 INFO3 from_mock: From MOCK: b5s1g0 rms:A 30.0 29.8 B 32.7 32.5 mn:A -0.5 0.2 B -0.1 0.1 gn: 12 11 2011-Dec-16 05:20:45 INFO3 from_mock: From MOCK: b6s0g0 rms:A 31.9 29.2 B 15.4 15.8 mn:A -0.5 0.2 B 0.4 -0.4 gn: 13 31 2011-Dec-16 05:20:45 INFO3 from_mock: From MOCK: b6s1g0 rms:A 38.4 34.9 B 12.4 12.0 mn:A 0.6 0.6 B 0.1 0.1 gn: 14 31 2011-Dec-16 05:20:45 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-16 05:20:45 LOG5 end_task: Level: (5) ID = <10213> Status = 0 0 0 0 ok 2011-Dec-16 05:20:45 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-16 05:20:45 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-16 05:20:45 LOG5 finish_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2011-Dec-16 05:20:45 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-16 05:20:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 05:20:45 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-16 05:20:45 LOG5 end_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2011-Dec-16 05:20:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-16 05:20:45 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-16 05:20:45 LOG5 finish_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2011-Dec-16 05:20:45 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-16 05:20:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 05:20:45 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-16 05:20:45 LOG5 end_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2011-Dec-16 05:20:45 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2011-Dec-16 05:20:45 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2011-Dec-16 05:20:46 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2011-Dec-16 05:20:46 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2011-Dec-16 05:20:46 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-16 05:20:46 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-16 05:20:46 LOG5 begin_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2011-Dec-16 05:20:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-16 05:20:46 START begin_task: Starting task 'selecting calibration type' 2011-Dec-16 05:20:46 LOG5 begin_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2011-Dec-16 05:20:46 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-16 05:20:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-16 05:20:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 05:20:46 START begin_task: Starting task 'waiting on setcal' 2011-Dec-16 05:20:46 LOG5 begin_task: Level: (5) ID = <10216> Status = 0 0 0 0 ok 2011-Dec-16 05:20:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2011-Dec-16 05:20:46 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-16 05:20:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 05:20:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 05:20:46 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-16 05:20:46 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-16 05:20:46 LOG5 end_task: Level: (5) ID = <10216> Status = 0 0 0 0 ok 2011-Dec-16 05:20:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-16 05:20:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-16 05:20:46 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-16 05:20:46 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-16 05:20:46 LOG5 begin_task: Level: (5) ID = <10217> Status = 0 0 0 0 ok 2011-Dec-16 05:20:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 05:20:46 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-16 05:20:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-16 05:20:46 LOG5 end_task: Level: (5) ID = <10217> Status = 0 0 0 0 ok 2011-Dec-16 05:20:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-16 05:20:46 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-16 05:20:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-16 05:20:46 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-16 05:20:46 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-16 05:20:46 LOG5 begin_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2011-Dec-16 05:20:46 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-16 05:20:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-16 05:20:46 LOG5 end_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2011-Dec-16 05:20:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-16 05:20:46 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-16 05:20:46 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-16 05:20:46 LOG5 end_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2011-Dec-16 05:20:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-16 05:20:46 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-16 05:20:46 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-16 05:20:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-16 05:20:46 LOG5 begin_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2011-Dec-16 05:20:46 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-16 05:20:46 NOTE WAPPDATA-new_file: New FITS file: wapp.20111216.a2048.0004.fits 2011-Dec-16 05:20:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-16 05:20:46 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111216.a2048.0004.fits} 2011-Dec-16 05:20:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-16 05:20:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-16 05:20:46 LOG5 end_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2011-Dec-16 05:20:46 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-16 05:20:46 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-16 05:20:46 LOG5 begin_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2011-Dec-16 05:20:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-16 05:20:46 LOG5 log_alfabeam: Parameters: 9.867583333333334 23.804305555555555 10.540726 2011.9588576444341 76.799965 2011-Dec-16 05:20:46 LOG4 log_alfabeam: ALFABEAM 0 9.867583333333332 23.804305555555555 2011-Dec-16 05:20:46 LOG4 log_alfabeam: ALFABEAM 1 9.869992321300293 23.711311463004812 2011-Dec-16 05:20:46 LOG4 log_alfabeam: ALFABEAM 2 9.874959344582203 23.773213492271118 2011-Dec-16 05:20:46 LOG4 log_alfabeam: ALFABEAM 3 9.872600953597200 23.866322207656765 2011-Dec-16 05:20:46 LOG4 log_alfabeam: ALFABEAM 4 9.865228200846119 23.897887393581641 2011-Dec-16 05:20:46 LOG4 log_alfabeam: ALFABEAM 5 9.860192575574452 23.834947489880282 2011-Dec-16 05:20:46 LOG4 log_alfabeam: ALFABEAM 6 9.862598630407302 23.741479648967893 2011-Dec-16 05:20:47 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-16 05:20:47 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-16 05:20:47 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-16 05:20:47 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_004 2011-Dec-16 05:20:47 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-16 05:20:47 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-16 05:20:47 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-16 05:20:47 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-16 05:20:47 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-16 05:20:47 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-16 05:20:47 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-16 05:20:47 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-16 05:20:47 LOG3 take_mock_data: PSET configuration: patternid=135000012 2011-Dec-16 05:20:47 LOG3 take_mock_data: PSET configuration: scanid=135000013 2011-Dec-16 05:20:47 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-16 05:20:47 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-16 05:20:47 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-16 05:20:47 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456359529.0 2011-Dec-16 05:20:47 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306359529.0 2011-Dec-16 05:20:47 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-16 05:20:47 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-16 05:20:47 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_004:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=135000012:scanid=135000013:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456359529.0:topobfreqhz=1306359529.0:filetype=1 2011-Dec-16 05:20:47 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-16 05:20:47 LOG5 begin_task: Level: (5) ID = <10221> Status = 0 0 0 0 ok 2011-Dec-16 05:20:47 LOG4 from_mock: From MOCK: psetok 2011-Dec-16 05:20:47 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-16 05:20:47 LOG5 end_task: Level: (5) ID = <10221> Status = 0 0 0 0 ok 2011-Dec-16 05:20:47 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-16 05:20:47 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-16 05:20:47 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-16 05:20:47 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-16 05:20:47 LOG5 begin_task: Level: (5) ID = <10222> Status = 0 0 0 0 ok 2011-Dec-16 05:20:47 LOG4 from_mock: From MOCK: starok 2011-Dec-16 05:20:47 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-16 05:20:47 LOG5 end_task: Level: (5) ID = <10222> Status = 0 0 0 0 ok 2011-Dec-16 05:20:47 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-16 05:20:47 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135000013 2011-Dec-16 05:20:47 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-16 05:20:47 LOG5 begin_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2011-Dec-16 05:20:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 05:20:47 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-16 05:20:47 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-16 05:20:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-16 05:20:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 33648.00 2011-Dec-16 05:20:49 INFO2 got_mock_message: Mock spectrometer start file number is 01200 2011-Dec-16 05:20:49 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-16 05:20:49 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-16 05:20:49 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-16 05:20:49 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-16 05:20:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-16 05:20:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-16 05:20:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-16 05:20:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-16 05:20:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-16 05:20:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-16 05:20:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-16 05:20:49 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-16 05:20:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 05:20:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 05:20:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 05:20:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 05:20:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 05:20:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 05:20:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 05:20:52 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:20:52.01 2011-Dec-16 05:20:52 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324027252.01 Fri Dec 16 05:20:52 2011 2011-Dec-16 05:20:52 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-16 05:20:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.359529 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 05:20:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.359529 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 05:20:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.359529 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 05:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.547 (still bad) 2011-Dec-16 05:20:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.359529 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 05:20:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.359529 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 05:20:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.359529 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 05:20:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.359529 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 05:20:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.359529 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 05:20:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.359529 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 05:20:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 05:20:57 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-16 05:20:58 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-16 05:20:58 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-16 05:20:58 LOG5 end_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2011-Dec-16 05:20:58 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-16 05:20:58 LOG5 end_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2011-Dec-16 05:20:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-16 05:20:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-16 05:20:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-16 05:20:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-16 05:20:58 LOG5 begin_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2011-Dec-16 05:20:58 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-16 05:20:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-16 05:20:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-16 05:20:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-16 05:20:58 LOG5 end_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2011-Dec-16 05:20:58 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-16 05:20:58 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-16 05:20:58 LOG5 begin_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2011-Dec-16 05:20:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-16 05:20:58 LOG5 log_alfabeam: Parameters: 9.867583333333334 23.804305555555555 10.543790 2011.9588579930032 76.799965 2011-Dec-16 05:20:58 LOG4 log_alfabeam: ALFABEAM 0 9.867583333333339 23.804305555555558 2011-Dec-16 05:20:58 LOG4 log_alfabeam: ALFABEAM 1 9.870006829606750 23.711381969931423 2011-Dec-16 05:20:58 LOG4 log_alfabeam: ALFABEAM 2 9.874964241720114 23.773432687406384 2011-Dec-16 05:20:58 LOG4 log_alfabeam: ALFABEAM 3 9.872591138489646 23.866472043619961 2011-Dec-16 05:20:58 LOG4 log_alfabeam: ALFABEAM 4 9.865213378542947 23.897816372161287 2011-Dec-16 05:20:58 LOG4 log_alfabeam: ALFABEAM 5 9.860187798833090 23.834729169129627 2011-Dec-16 05:20:58 LOG4 log_alfabeam: ALFABEAM 6 9.862608469361481 23.741333513144536 2011-Dec-16 05:20:58 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-16 05:20:58 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-16 05:20:58 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-16 05:20:58 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_004 2011-Dec-16 05:20:58 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-16 05:20:58 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-16 05:20:58 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-16 05:20:58 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-16 05:20:58 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-16 05:20:58 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-16 05:20:58 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-16 05:20:58 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-16 05:20:58 LOG3 take_mock_data: PSET configuration: patternid=135000012 2011-Dec-16 05:20:58 LOG3 take_mock_data: PSET configuration: scanid=135000014 2011-Dec-16 05:20:58 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-16 05:20:58 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-16 05:20:58 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-16 05:20:58 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456359529.0 2011-Dec-16 05:20:58 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306359529.0 2011-Dec-16 05:20:58 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-16 05:20:58 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-16 05:20:58 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_004:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=135000012:scanid=135000014:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456359529.0:topobfreqhz=1306359529.0:filetype=1 2011-Dec-16 05:20:58 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-16 05:20:58 LOG5 begin_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2011-Dec-16 05:20:58 LOG4 from_mock: From MOCK: psetok 2011-Dec-16 05:20:58 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-16 05:20:58 LOG5 end_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2011-Dec-16 05:20:58 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-16 05:20:58 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-16 05:20:58 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-16 05:20:58 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-16 05:20:58 LOG5 begin_task: Level: (5) ID = <10227> Status = 0 0 0 0 ok 2011-Dec-16 05:20:58 LOG4 from_mock: From MOCK: starok 2011-Dec-16 05:20:58 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-16 05:20:58 LOG5 end_task: Level: (5) ID = <10227> Status = 0 0 0 0 ok 2011-Dec-16 05:20:58 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-16 05:20:58 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135000014 2011-Dec-16 05:20:58 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-16 05:20:58 LOG5 begin_task: Level: (5) ID = <10228> Status = 0 0 0 0 ok 2011-Dec-16 05:20:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 05:20:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-16 05:20:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 33659.00 2011-Dec-16 05:20:59 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-16 05:20:59 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-16 05:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.547 (still bad) 2011-Dec-16 05:21:01 INFO2 got_mock_message: Mock spectrometer start file number is 01300 2011-Dec-16 05:21:01 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-16 05:21:01 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-16 05:21:01 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-16 05:21:01 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-16 05:21:01 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-16 05:21:01 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-16 05:21:01 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-16 05:21:01 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-16 05:21:01 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-16 05:21:01 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-16 05:21:01 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-16 05:21:01 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-16 05:21:01 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 05:21:01 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 05:21:01 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 05:21:01 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 05:21:01 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 05:21:01 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 05:21:01 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 05:21:04 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:21:04.02 2011-Dec-16 05:21:04 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324027264.02 Fri Dec 16 05:21:04 2011 2011-Dec-16 05:21:04 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-16 05:21:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.359529 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 05:21:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.359529 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 05:21:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.359529 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 05:21:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.359529 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 05:21:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.359529 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 05:21:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.359529 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 05:21:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.359529 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 05:21:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.359529 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 05:21:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.359529 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 05:21:04 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-16 05:21:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 05:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:21:09 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-16 05:21:10 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-16 05:21:10 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-16 05:21:10 LOG5 end_task: Level: (5) ID = <10228> Status = 0 0 0 0 ok 2011-Dec-16 05:21:10 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-16 05:21:10 LOG5 end_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2011-Dec-16 05:21:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-16 05:21:10 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-16 05:21:10 LOG5 finish_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2011-Dec-16 05:21:10 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-16 05:21:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 05:21:10 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-16 05:21:10 LOG5 end_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2011-Dec-16 05:21:10 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-16 05:21:10 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 122.05 and ZA = 10.67 2011-Dec-16 05:21:10 LOG3 track_source: Calling 'track_source AGES3193_p3_004 122.05 10.6722801778 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-16 05:21:10 START begin_task: Starting task 'sending tracking commands' 2011-Dec-16 05:21:10 LOG5 begin_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2011-Dec-16 05:21:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_004} INFO {Slewing to source 'AGES3193_p3_004' ...} 2011-Dec-16 05:21:10 INFO1 track_source: Starting to track AGES3193_p3_004 2011-Dec-16 05:21:10 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_004" 2011-Dec-16 05:21:10 LOG3 vw_send: To DATATAKING: set ra 122.05 2011-Dec-16 05:21:10 LOG3 vw_send: To DATATAKING: set dec 10.6722801778 2011-Dec-16 05:21:10 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-16 05:21:10 LOG3 vw_send: To DATATAKING: pnt tr 122.05 10.6722801778 -CF 2011-Dec-16 05:21:10 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 05:21:10 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-16 05:21:10 LOG5 finish_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2011-Dec-16 05:21:10 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-16 05:21:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 05:21:10 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-16 05:21:10 LOG5 end_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2011-Dec-16 05:21:10 LOG1 fixed_driftmap: Parameters: HA = +00:39:29.8 Start = 10:33:12.0 LST = 10:32:49.7 diff = 22.3 secs 2011-Dec-16 05:21:10 INFO2 fixed_driftmap: Waiting 20.3 seconds for RA 9:53:42 2011-Dec-16 05:21:10 INFO2 lstwait: Waiting for 20.3 secs from LST 10:32:50 to LST 10:33:10 ... 2011-Dec-16 05:21:10 LOG4 send_obs_status: To obs_status: <1> TASKTIME 20.267990325941323 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-16 05:21:10 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-16 05:21:10 LOG5 begin_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2011-Dec-16 05:21:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_004" 2011-Dec-16 05:21:10 LOG4 got_cormsg: From DATATAKING: set ra 122.05 2011-Dec-16 05:21:10 LOG4 got_cormsg: From DATATAKING: set dec 10.6722801778 2011-Dec-16 05:21:10 LOG4 got_cormsg: From DATATAKING: vw% 122.05 2011-Dec-16 05:21:10 LOG4 got_cormsg: From DATATAKING: vw% 10.6722801778 2011-Dec-16 05:21:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 05:21:10 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-16 05:21:10 LOG4 got_cormsg: From DATATAKING: pnt tr 122.05 10.6722801778 -CF 2011-Dec-16 05:21:10 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 05:21:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-16 05:21:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 05:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:21:30 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-16 05:21:30 LOG5 end_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2011-Dec-16 05:21:30 LOG4 lstwait: Finished waiting 0.73 seconds late 2011-Dec-16 05:21:30 INFO3 lstwait: Finished waiting 2011-Dec-16 05:21:30 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-16 05:21:30 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-16 05:21:30 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-16 05:21:30 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-16 05:21:30 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-16 05:21:30 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-16 05:21:30 LOG5 begin_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2011-Dec-16 05:21:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-16 05:21:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-16 05:21:30 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-16 05:21:30 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-16 05:21:30 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-16 05:21:30 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_004 2011-Dec-16 05:21:30 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-16 05:21:30 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-16 05:21:30 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-16 05:21:30 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-16 05:21:30 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-16 05:21:30 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-16 05:21:30 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-16 05:21:30 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-16 05:21:30 LOG3 take_mock_data: PSET configuration: patternid=135000015 2011-Dec-16 05:21:30 LOG3 take_mock_data: PSET configuration: scanid=135000015 2011-Dec-16 05:21:30 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-16 05:21:30 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-16 05:21:30 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-16 05:21:30 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456359529.0 2011-Dec-16 05:21:30 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306359529.0 2011-Dec-16 05:21:30 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-16 05:21:30 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-16 05:21:31 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_004:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=135000015:scanid=135000015:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456359529.0:topobfreqhz=1306359529.0:filetype=1 2011-Dec-16 05:21:31 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-16 05:21:31 LOG5 begin_task: Level: (4) ID = <10232> Status = 0 0 0 0 ok 2011-Dec-16 05:21:31 LOG4 from_mock: From MOCK: psetok 2011-Dec-16 05:21:31 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-16 05:21:31 LOG5 end_task: Level: (4) ID = <10232> Status = 0 0 0 0 ok 2011-Dec-16 05:21:31 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-16 05:21:31 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-16 05:21:31 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-16 05:21:31 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-16 05:21:31 LOG5 begin_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2011-Dec-16 05:21:31 LOG4 from_mock: From MOCK: starok 2011-Dec-16 05:21:31 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-16 05:21:31 LOG5 end_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2011-Dec-16 05:21:31 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-16 05:21:31 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 135000015 2011-Dec-16 05:21:31 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-16 05:21:31 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2011-Dec-16 05:21:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 05:21:31 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-16 05:21:31 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-16 05:21:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-16 05:21:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 33692.00 2011-Dec-16 05:21:33 INFO2 got_mock_message: Mock spectrometer start file number is 01400 2011-Dec-16 05:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.359529 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 05:21:33 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-16 05:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.359529 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 05:21:33 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2011-Dec-16 05:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.359529 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 05:21:33 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-16 05:21:33 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-16 05:21:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-16 05:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.359529 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 05:21:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-16 05:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.359529 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 05:21:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-16 05:21:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-16 05:21:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-16 05:21:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-16 05:21:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-16 05:21:33 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-16 05:21:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 05:21:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 05:21:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 05:21:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 05:21:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 05:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.359529 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 05:21:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 05:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.359529 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 05:21:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 05:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.359529 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 05:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.359529 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 05:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:21:36 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:21:36.02 2011-Dec-16 05:21:36 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324027296.02 Fri Dec 16 05:21:36 2011 2011-Dec-16 05:21:36 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-16 05:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:21:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:21:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 1.083 0.919 0.953 2011-Dec-16 05:21:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.967 1.033 1.071 1.115 2011-Dec-16 05:21:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.839 1.094 0.907 1.078 2011-Dec-16 05:21:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.048 0.014 0.914 0.014 2011-Dec-16 05:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 05:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 05:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 05:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 05:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:22:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:22:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 1.080 0.916 0.952 2011-Dec-16 05:22:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.960 1.029 1.070 1.115 2011-Dec-16 05:22:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.836 1.096 0.906 1.077 2011-Dec-16 05:22:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.050 0.014 0.915 0.014 2011-Dec-16 05:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:23:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:23:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.105 1.082 0.917 0.953 2011-Dec-16 05:23:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.961 1.027 1.071 1.116 2011-Dec-16 05:23:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.839 1.097 0.909 1.077 2011-Dec-16 05:23:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.050 0.014 0.915 0.014 2011-Dec-16 05:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:24:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:24:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 1.081 0.917 0.953 2011-Dec-16 05:24:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.964 1.027 1.074 1.117 2011-Dec-16 05:24:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.839 1.099 0.910 1.079 2011-Dec-16 05:24:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.050 0.014 0.915 0.014 2011-Dec-16 05:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 05:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 05:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 05:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 05:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-16 05:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-16 05:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-16 05:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-16 05:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-16 05:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 05:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 05:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 05:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:25:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:25:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 1.081 0.916 0.952 2011-Dec-16 05:25:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.960 1.026 1.072 1.118 2011-Dec-16 05:25:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.841 1.104 0.916 1.084 2011-Dec-16 05:25:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.051 0.014 0.915 0.014 2011-Dec-16 05:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:26:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 32-63 errors 2011-Dec-16 05:26:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 16-31 errors 2011-Dec-16 05:26:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 16-31 errors 2011-Dec-16 05:26:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors PFB = 64-127 errors 2011-Dec-16 05:26:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 2-3 errors 2011-Dec-16 05:26:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2011-Dec-16 05:26:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 32-63 errors 2011-Dec-16 05:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:26:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 8-15 errors 2011-Dec-16 05:26:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 4-7 errors 2011-Dec-16 05:26:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 8-15 errors 2011-Dec-16 05:26:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 16-31 errors 2011-Dec-16 05:26:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 2-3 errors 2011-Dec-16 05:26:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC = 2-3 errors PFB = 32-63 errors 2011-Dec-16 05:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:26:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 64-127 errors 2011-Dec-16 05:26:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 64-127 errors 2011-Dec-16 05:26:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): ADC = 1024-2047 errors PFB = 32-63 errors 2011-Dec-16 05:26:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors PFB = 32-63 errors 2011-Dec-16 05:26:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors PFB = 64-127 errors 2011-Dec-16 05:26:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors PFB = 64-127 errors 2011-Dec-16 05:26:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 64-127 errors 2011-Dec-16 05:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:26:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 8-15 errors 2011-Dec-16 05:26:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 8-15 errors 2011-Dec-16 05:26:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 2-3 errors 2011-Dec-16 05:26:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2011-Dec-16 05:26:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 8-15 errors 2011-Dec-16 05:26:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 16-31 errors 2011-Dec-16 05:26:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 2-3 errors 2011-Dec-16 05:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 05:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:26:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:26:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.109 1.088 0.917 0.953 2011-Dec-16 05:26:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.961 1.026 1.073 1.119 2011-Dec-16 05:26:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.839 1.100 0.909 1.079 2011-Dec-16 05:26:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.048 0.014 0.913 0.014 2011-Dec-16 05:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 05:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 05:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:27:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:27:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.104 1.082 0.916 0.952 2011-Dec-16 05:27:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.961 1.029 1.071 1.116 2011-Dec-16 05:27:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.837 1.095 0.909 1.081 2011-Dec-16 05:27:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.050 0.014 0.915 0.014 2011-Dec-16 05:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:28:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:28:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:28:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.106 1.083 0.919 0.955 2011-Dec-16 05:28:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.963 1.031 1.071 1.117 2011-Dec-16 05:28:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.838 1.096 0.910 1.079 2011-Dec-16 05:28:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.051 0.014 0.916 0.014 2011-Dec-16 05:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:29:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:29:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.106 1.081 0.925 0.961 2011-Dec-16 05:29:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.961 1.030 1.071 1.119 2011-Dec-16 05:29:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.838 1.098 0.910 1.078 2011-Dec-16 05:29:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.054 0.014 0.917 0.014 2011-Dec-16 05:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:30:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:30:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.117 1.093 0.920 0.956 2011-Dec-16 05:30:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.961 1.034 1.075 1.120 2011-Dec-16 05:30:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.838 1.099 0.910 1.078 2011-Dec-16 05:30:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.051 0.014 0.916 0.014 2011-Dec-16 05:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:31:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:31:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:31:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.104 1.083 0.917 0.953 2011-Dec-16 05:31:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.962 1.030 1.074 1.117 2011-Dec-16 05:31:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.838 1.097 0.911 1.081 2011-Dec-16 05:31:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.051 0.014 0.917 0.014 2011-Dec-16 05:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-16 05:32:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors PFB = 128-255 errors 2011-Dec-16 05:32:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 128-255 errors 2011-Dec-16 05:32:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): ADC >= 4096 errors PFB = 64-127 errors 2011-Dec-16 05:32:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): ADC = 4-7 errors PFB = 128-255 errors 2011-Dec-16 05:32:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors PFB = 128-255 errors 2011-Dec-16 05:32:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors PFB = 128-255 errors 2011-Dec-16 05:32:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC = 1 error PFB = 64-127 errors 2011-Dec-16 05:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:32:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:32:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.118 1.092 0.918 0.955 2011-Dec-16 05:32:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.965 1.031 1.073 1.117 2011-Dec-16 05:32:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.838 1.097 0.912 1.079 2011-Dec-16 05:32:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.048 0.014 0.914 0.014 2011-Dec-16 05:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 05:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2011-Dec-16 05:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-16 05:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2011-Dec-16 05:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 05:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 05:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-16 05:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-16 05:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 05:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 05:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 05:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 05:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 05:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 05:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 05:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 05:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-16 05:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 05:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 05:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:34:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:34:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.104 1.081 0.919 0.953 2011-Dec-16 05:34:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.962 1.030 1.074 1.118 2011-Dec-16 05:34:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.839 1.102 0.915 1.083 2011-Dec-16 05:34:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.053 0.014 0.918 0.014 2011-Dec-16 05:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:35:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:35:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.106 1.085 0.917 0.954 2011-Dec-16 05:35:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.962 1.028 1.072 1.117 2011-Dec-16 05:35:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.838 1.097 0.910 1.080 2011-Dec-16 05:35:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.049 0.014 0.915 0.014 2011-Dec-16 05:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:36:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:36:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:36:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 1.079 0.917 0.953 2011-Dec-16 05:36:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.961 1.029 1.075 1.118 2011-Dec-16 05:36:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.836 1.096 0.908 1.077 2011-Dec-16 05:36:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.047 0.014 0.914 0.014 2011-Dec-16 05:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:36:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 05:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 05:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 05:36:31 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 2-3 errors 2011-Dec-16 05:36:31 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 4-7 errors 2011-Dec-16 05:36:31 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 4-7 errors 2011-Dec-16 05:36:31 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 8-15 errors 2011-Dec-16 05:36:31 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 32-63 errors 2011-Dec-16 05:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 05:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:37:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:37:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.106 1.080 0.926 0.962 2011-Dec-16 05:37:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.962 1.029 1.073 1.116 2011-Dec-16 05:37:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.840 1.103 0.910 1.078 2011-Dec-16 05:37:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.049 0.014 0.914 0.014 2011-Dec-16 05:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:37:19 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 4-7 errors 2011-Dec-16 05:37:19 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 32-63 errors 2011-Dec-16 05:37:19 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 32-63 errors 2011-Dec-16 05:37:19 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 16-31 errors 2011-Dec-16 05:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:37:31 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 2-3 errors 2011-Dec-16 05:37:31 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 16-31 errors 2011-Dec-16 05:37:31 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 2-3 errors 2011-Dec-16 05:37:31 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 8-15 errors 2011-Dec-16 05:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 05:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 05:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 05:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-16 05:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-16 05:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-16 05:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-16 05:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-16 05:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 05:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 05:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:38:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:38:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.113 1.089 0.916 0.952 2011-Dec-16 05:38:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.962 1.028 1.073 1.117 2011-Dec-16 05:38:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.837 1.096 0.911 1.079 2011-Dec-16 05:38:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.052 0.014 0.917 0.014 2011-Dec-16 05:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:39:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:39:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.110 1.086 0.917 0.954 2011-Dec-16 05:39:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.959 1.030 1.074 1.116 2011-Dec-16 05:39:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.838 1.094 0.913 1.080 2011-Dec-16 05:39:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.049 0.014 0.917 0.014 2011-Dec-16 05:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:39:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:40:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:40:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.104 1.084 0.918 0.954 2011-Dec-16 05:40:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.968 1.032 1.073 1.119 2011-Dec-16 05:40:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.838 1.095 0.910 1.079 2011-Dec-16 05:40:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.051 0.014 0.917 0.014 2011-Dec-16 05:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 05:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 05:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 05:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 05:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 05:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 05:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 05:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 05:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 05:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 05:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-16 05:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-16 05:41:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:41:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.106 1.082 0.919 0.953 2011-Dec-16 05:41:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.961 1.031 1.078 1.122 2011-Dec-16 05:41:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.838 1.096 0.911 1.080 2011-Dec-16 05:41:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.049 0.014 0.916 0.014 2011-Dec-16 05:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:41:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 05:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:41:37 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-16 05:41:37 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-16 05:41:37 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-16 05:41:37 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2011-Dec-16 05:41:37 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-16 05:41:37 LOG5 end_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2011-Dec-16 05:41:37 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-16 05:41:37 LOG5 finish_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2011-Dec-16 05:41:37 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-16 05:41:37 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-16 05:41:37 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-16 05:41:37 LOG5 end_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2011-Dec-16 05:41:37 COMMAND run_command_line: EXECUTING command 41: 'ENDIF' 2011-Dec-16 05:41:37 COMMAND run_command_line: EXECUTING command 44: 'IF LSTSLEW(AGES3193_p3_006) < 105641 THEN' 2011-Dec-16 05:41:37 LOG3 is_if_valid: Current source data: up 113.6 14.9 UP - - 22 1.8 2011-Dec-16 05:41:37 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_006) < 105641 2011-Dec-16 05:41:37 INFO5 is_if_valid: Condition parsed as: 10.918899 < 10.944722222222222 2011-Dec-16 05:41:37 COMMAND run_command_line: EXECUTING command 45: 'FIXEDDRIFT az=112.70 alfaangle=-90.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_006 ra=95300.00 dec=234530.00' 2011-Dec-16 05:41:37 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-16 05:41:38 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-16 05:41:38 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 112.70 -90.5 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_006 95300.00 234530.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-16 05:41:38 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-16 05:41:38 LOG5 begin_task: Level: (2) ID = <10235> Status = 0 0 0 0 ok 2011-Dec-16 05:41:38 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_004' 2011-Dec-16 05:41:38 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-16 05:41:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_006} 2011-Dec-16 05:41:38 INFO3 fixed_driftmap: Sending telescope to Az = 112.70 and ZA = 15.63 2011-Dec-16 05:41:38 LOG3 track_source: Calling 'track_source AGES3193_p3_006 112.70 15.6277002257 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-16 05:41:38 START begin_task: Starting task 'sending tracking commands' 2011-Dec-16 05:41:38 LOG5 begin_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2011-Dec-16 05:41:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_006} INFO {Slewing to source 'AGES3193_p3_006' ...} 2011-Dec-16 05:41:38 INFO1 track_source: Starting to track AGES3193_p3_006 2011-Dec-16 05:41:38 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_006" 2011-Dec-16 05:41:38 LOG3 vw_send: To DATATAKING: set ra 112.70 2011-Dec-16 05:41:38 LOG3 vw_send: To DATATAKING: set dec 15.6277002257 2011-Dec-16 05:41:38 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-16 05:41:38 LOG3 vw_send: To DATATAKING: pnt tr 112.70 15.6277002257 -CF 2011-Dec-16 05:41:38 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 05:41:38 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-16 05:41:38 LOG5 finish_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2011-Dec-16 05:41:38 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-16 05:41:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 05:41:38 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-16 05:41:38 LOG5 end_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2011-Dec-16 05:41:38 START begin_task: Starting task 'rotate ALFA to -90.5 degrees' 2011-Dec-16 05:41:38 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2011-Dec-16 05:41:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -90.5 degrees ...} 2011-Dec-16 05:41:38 INFO2 rotate_alfa: ALFA commanded to -90.5 degrees 2011-Dec-16 05:41:38 LOG3 sock_errsend: To ALFAMOTOR: POSITION -90.5 REPLY 2011-Dec-16 05:41:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-16 05:41:38 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-16 05:41:38 LOG5 begin_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2011-Dec-16 05:41:38 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_006" 2011-Dec-16 05:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:41:38 LOG4 got_cormsg: From DATATAKING: set ra 112.70 2011-Dec-16 05:41:38 LOG4 got_cormsg: From DATATAKING: set dec 15.6277002257 2011-Dec-16 05:41:38 LOG4 got_cormsg: From DATATAKING: vw% 112.70 2011-Dec-16 05:41:38 LOG4 got_cormsg: From DATATAKING: vw% 15.6277002257 2011-Dec-16 05:41:38 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 05:41:38 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-16 05:41:38 LOG4 got_cormsg: From DATATAKING: pnt tr 112.70 15.6277002257 -CF 2011-Dec-16 05:41:38 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 05:41:38 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-16 05:41:38 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 05:43:11 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-16 05:43:11 INFO3 alfa_motor: ALFA rotator in-position -90.50 degrees 2011-Dec-16 05:43:11 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-16 05:43:11 LOG5 end_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2011-Dec-16 05:43:11 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-16 05:43:11 STOP finish_task: Finishing task 'rotate ALFA to -90.5 degrees' 2011-Dec-16 05:43:11 LOG5 finish_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2011-Dec-16 05:43:11 INFO2 finish_task: DONE finished configuration: rotating ALFA to -90.5 degrees 2011-Dec-16 05:43:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 05:43:11 STOP end_task: Finishing task 'rotate ALFA to -90.5 degrees' with status 'OK' 2011-Dec-16 05:43:11 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2011-Dec-16 05:43:11 START begin_task: Starting task 'waiting on telescope' 2011-Dec-16 05:43:11 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2011-Dec-16 05:43:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-16 05:43:11 LOG3 waittrk: Start waittrk 5 2011-Dec-16 05:43:11 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-16 05:43:11 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2011-Dec-16 05:43:16 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-16 05:43:16 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2011-Dec-16 05:43:16 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-16 05:43:16 LOG5 begin_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2011-Dec-16 05:43:48 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-16 05:43:48 LOG5 end_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2011-Dec-16 05:43:48 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-16 05:43:48 INFO2 waittrk: Now tracking AGES3193_p3_006 2011-Dec-16 05:43:48 LOG4 waittrk: Current telescope position: Az = 112.44 ZA = 15.64 2011-Dec-16 05:43:48 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-16 05:43:48 LOG5 finish_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2011-Dec-16 05:43:48 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-16 05:43:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 05:43:48 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-16 05:43:48 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2011-Dec-16 05:43:48 START begin_task: Starting task 'selecting calibration type' 2011-Dec-16 05:43:48 LOG5 begin_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2011-Dec-16 05:43:48 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-16 05:43:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-16 05:43:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 05:43:48 START begin_task: Starting task 'waiting on setcal' 2011-Dec-16 05:43:48 LOG5 begin_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2011-Dec-16 05:43:48 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-16 05:43:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 05:43:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 05:43:49 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-16 05:43:49 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-16 05:43:49 LOG5 end_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2011-Dec-16 05:43:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-16 05:43:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-16 05:43:49 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-16 05:43:49 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-16 05:43:49 LOG5 begin_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2011-Dec-16 05:43:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 05:43:50 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-16 05:43:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-16 05:43:50 LOG5 end_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2011-Dec-16 05:43:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-16 05:43:50 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-16 05:43:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-16 05:43:50 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-16 05:43:50 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-16 05:43:50 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2011-Dec-16 05:43:50 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-16 05:43:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-16 05:43:50 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2011-Dec-16 05:43:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-16 05:43:50 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-16 05:43:50 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-16 05:43:50 LOG5 end_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2011-Dec-16 05:43:50 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Dec-16 05:43:50 INFO2 astwait: Waiting for 7 seconds from 09:43:50 to 09:43:57 UTC ... 2011-Dec-16 05:43:50 LOG4 send_obs_status: To obs_status: <1> TASKTIME 7 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-16 05:43:50 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Dec-16 05:43:50 LOG5 begin_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2011-Dec-16 05:43:57 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Dec-16 05:43:57 LOG5 end_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2011-Dec-16 05:43:57 INFO3 astwait: Finished waiting 2011-Dec-16 05:43:57 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-16 05:43:57 LOG5 dopset_later: Calling 'dopset_later 61.069437403827926' 2011-Dec-16 05:43:57 INFO3 dopset_later: Setting Doppler correction for 05:44:57 (61.1 seconds from now) 2011-Dec-16 05:43:57 LOG5 antvel: Calling 'antvel 112.700000 15.627700 F Heliocentric 61.069437403827926' 2011-Dec-16 05:43:57 LOG2 antvel: Transforming current Az = 112.70 ZA = 15.63 to apparent RA = 09:53:42.0 Dec = +23:41:52.1 2011-Dec-16 05:43:57 LOG2 antvel: Parameters to Doppler: Heliocentric 35097 2011 350 0.0 2011-Dec-16 05:43:57 INFO5 antvel: Computed antenna velocity: -25.16057 km/s 2011-Dec-16 05:43:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-25.160566605300001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-16 05:43:57 INFO4 dopset_gen: New sky frequencies: 1381.359361 1381.359361 1381.359361 1381.359361 1381.359361 1381.359361 1381.359361 1381.359361 1381.359361 2011-Dec-16 05:43:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.359361 sky0=1381.359361 sky1=1381.359361 sky2=1381.359361 sky3=1381.359361 sky4=1381.359361 sky5=1381.359361 sky6=1381.359361 sky7=1381.359361 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-16 05:43:57 LOG2 dopset_gen: Result from 'sky2syn': 1631.359361 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-16 05:43:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631359361.0} 2011-Dec-16 05:43:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 05:43:57 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-16 05:43:57 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-16 05:43:57 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.5 Dec = +23:45:15.6 2011-Dec-16 05:43:57 LOG3 track_source: Calling 'track_source AGES3193_p3_006 095203.5 234515.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-16 05:43:57 START begin_task: Starting task 'sending tracking commands' 2011-Dec-16 05:43:57 LOG5 begin_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2011-Dec-16 05:43:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_006} INFO {Slewing to source 'AGES3193_p3_006' ...} 2011-Dec-16 05:43:57 INFO1 track_source: Starting to track AGES3193_p3_006 2011-Dec-16 05:43:57 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_006" 2011-Dec-16 05:43:57 LOG3 vw_send: To DATATAKING: set ra 095203.5 2011-Dec-16 05:43:57 LOG3 vw_send: To DATATAKING: set dec 234515.6 2011-Dec-16 05:43:57 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-16 05:43:57 LOG3 vw_send: To DATATAKING: pnt tr 095203.5 234515.6 -CJ 2011-Dec-16 05:43:57 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 05:43:57 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-16 05:43:57 LOG5 finish_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2011-Dec-16 05:43:57 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-16 05:43:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 05:43:57 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-16 05:43:57 LOG5 end_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2011-Dec-16 05:43:57 START begin_task: Starting task 'waiting on telescope' 2011-Dec-16 05:43:57 LOG5 begin_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2011-Dec-16 05:43:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-16 05:43:57 LOG3 waittrk: Start waittrk 5 2011-Dec-16 05:43:57 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-16 05:43:57 LOG5 begin_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2011-Dec-16 05:43:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631359361.0} 2011-Dec-16 05:43:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 05:43:57 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_006" 2011-Dec-16 05:43:57 LOG4 got_cormsg: From DATATAKING: set ra 095203.5 2011-Dec-16 05:43:57 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-16 05:43:57 LOG4 got_cormsg: From DATATAKING: set dec 234515.6 2011-Dec-16 05:43:57 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-16 05:43:57 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.5 234515.6 -CJ 2011-Dec-16 05:43:57 LOG4 got_cormsg: From DATATAKING: vw% 095203.5 2011-Dec-16 05:43:57 LOG4 got_cormsg: From DATATAKING: vw% 234515.6 2011-Dec-16 05:43:57 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-16 05:43:57 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 05:43:57 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 05:43:57 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 05:44:02 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-16 05:44:02 LOG5 end_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2011-Dec-16 05:44:02 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-16 05:44:02 LOG5 begin_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2011-Dec-16 05:44:04 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-16 05:44:04 LOG5 end_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2011-Dec-16 05:44:04 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-16 05:44:04 INFO2 waittrk: Now tracking AGES3193_p3_006 2011-Dec-16 05:44:04 LOG4 waittrk: Current telescope position: Az = 112.40 ZA = 15.66 2011-Dec-16 05:44:04 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-16 05:44:04 LOG5 finish_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2011-Dec-16 05:44:04 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-16 05:44:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 05:44:04 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-16 05:44:04 LOG5 end_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2011-Dec-16 05:44:04 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-16 05:44:04 LOG5 begin_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2011-Dec-16 05:44:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-16 05:44:04 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-16 05:44:04 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-16 05:44:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-16 05:44:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 05:44:04 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-16 05:44:04 LOG5 begin_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2011-Dec-16 05:44:04 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-16 05:44:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 05:44:05 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 05:44:05 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-16 05:44:05 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-16 05:44:05 LOG5 end_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2011-Dec-16 05:44:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-16 05:44:05 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-16 05:44:05 LOG5 begin_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2011-Dec-16 05:44:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-16 05:44:05 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-16 05:44:05 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-16 05:44:05 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-16 05:44:05 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-16 05:44:05 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-16 05:44:05 LOG5 begin_task: Level: (5) ID = <10254> Status = 0 0 0 0 ok 2011-Dec-16 05:44:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-16 05:44:05 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 05:44:05 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 8 6 dB 2011-Dec-16 05:44:05 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 3 4 dB 2011-Dec-16 05:44:05 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 3 dB 2011-Dec-16 05:44:05 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2011-Dec-16 05:44:05 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-16 05:44:05 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-16 05:44:05 LOG5 end_task: Level: (5) ID = <10254> Status = 0 0 0 0 ok 2011-Dec-16 05:44:05 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.923 1.117 ALFA beam 1: 0.966 0.950 2011-Dec-16 05:44:05 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.004 1.078 ALFA beam 3: 1.090 0.946 2011-Dec-16 05:44:05 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.861 0.964 ALFA beam 5: 1.021 0.910 2011-Dec-16 05:44:05 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.918 0.014 ALFA beam 7: 1.000 0.014 2011-Dec-16 05:44:05 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-16 05:44:05 LOG5 finish_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2011-Dec-16 05:44:05 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-16 05:44:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 05:44:05 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-16 05:44:05 LOG5 end_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2011-Dec-16 05:44:05 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-16 05:44:05 LOG5 begin_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2011-Dec-16 05:44:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-16 05:44:05 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-16 05:44:05 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-16 05:44:05 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-16 05:44:05 LOG5 begin_task: Level: (5) ID = <10256> Status = 0 0 0 0 ok 2011-Dec-16 05:44:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:44:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.923 1.117 0.966 0.950 2011-Dec-16 05:44:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.004 1.078 1.090 0.946 2011-Dec-16 05:44:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.861 0.964 1.021 0.910 2011-Dec-16 05:44:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.918 0.014 1.000 0.014 2011-Dec-16 05:44:12 INFO3 from_mock: From MOCK: b0s0g0 rms:A 32.3 28.4 B 31.0 31.1 mn:A 0.0 -0.1 B -0.4 -0.4 gn: 11 11 2011-Dec-16 05:44:12 INFO3 from_mock: From MOCK: b0s1g0 rms:A 29.1 27.8 B 28.8 30.5 mn:A 0.1 -0.6 B -0.5 0.2 gn: 11 11 2011-Dec-16 05:44:12 INFO3 from_mock: From MOCK: b1s0g0 rms:A 31.5 29.5 B 33.4 29.3 mn:A 0.7 0.7 B 0.1 -0.1 gn: 7 11 2011-Dec-16 05:44:12 INFO3 from_mock: From MOCK: b1s1g0 rms:A 31.1 28.7 B 28.5 28.5 mn:A -0.3 -0.3 B 0.6 0.2 gn: 8 9 2011-Dec-16 05:44:12 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.9 29.1 B 29.3 30.7 mn:A -0.0 -0.3 B 0.3 0.1 gn: 10 11 2011-Dec-16 05:44:12 INFO3 from_mock: From MOCK: b2s1g0 rms:A 30.9 31.1 B 30.3 28.1 mn:A 0.3 -0.3 B 0.1 0.2 gn: 11 11 2011-Dec-16 05:44:12 INFO3 from_mock: From MOCK: b3s0g0 rms:A 29.5 29.2 B 32.1 28.6 mn:A 0.3 -0.2 B 0.1 -0.2 gn: 12 12 2011-Dec-16 05:44:12 INFO3 from_mock: From MOCK: b3s1g0 rms:A 31.2 30.5 B 30.8 32.1 mn:A -0.3 0.4 B 0.2 0.2 gn: 12 12 2011-Dec-16 05:44:12 INFO3 from_mock: From MOCK: b4s0g0 rms:A 31.0 30.0 B 29.4 29.6 mn:A -0.3 -0.4 B -0.4 -0.0 gn: 13 11 2011-Dec-16 05:44:12 INFO3 from_mock: From MOCK: b4s1g0 rms:A 30.5 27.6 B 29.1 28.1 mn:A -0.1 -0.0 B -0.3 0.2 gn: 15 12 2011-Dec-16 05:44:12 INFO3 from_mock: From MOCK: b5s0g0 rms:A 30.6 29.5 B 28.8 28.8 mn:A 0.4 0.4 B 0.0 0.5 gn: 12 10 2011-Dec-16 05:44:12 INFO3 from_mock: From MOCK: b5s1g0 rms:A 30.9 30.7 B 28.9 28.6 mn:A -0.4 0.2 B -0.0 0.2 gn: 12 10 2011-Dec-16 05:44:12 INFO3 from_mock: From MOCK: b6s0g0 rms:A 29.7 27.2 B 14.2 14.6 mn:A -0.4 0.1 B 0.4 -0.5 gn: 12 31 2011-Dec-16 05:44:12 INFO3 from_mock: From MOCK: b6s1g0 rms:A 30.5 27.7 B 11.2 10.9 mn:A 0.6 0.5 B 0.1 0.2 gn: 13 31 2011-Dec-16 05:44:12 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-16 05:44:12 LOG5 end_task: Level: (5) ID = <10256> Status = 0 0 0 0 ok 2011-Dec-16 05:44:12 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-16 05:44:12 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-16 05:44:12 LOG5 finish_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2011-Dec-16 05:44:12 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-16 05:44:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 05:44:12 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-16 05:44:12 LOG5 end_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2011-Dec-16 05:44:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-16 05:44:12 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-16 05:44:12 LOG5 finish_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2011-Dec-16 05:44:12 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-16 05:44:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 05:44:12 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-16 05:44:12 LOG5 end_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2011-Dec-16 05:44:12 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2011-Dec-16 05:44:12 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2011-Dec-16 05:44:12 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2011-Dec-16 05:44:12 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2011-Dec-16 05:44:12 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-16 05:44:12 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-16 05:44:12 LOG5 begin_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2011-Dec-16 05:44:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-16 05:44:12 START begin_task: Starting task 'selecting calibration type' 2011-Dec-16 05:44:12 LOG5 begin_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2011-Dec-16 05:44:12 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-16 05:44:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-16 05:44:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 05:44:12 START begin_task: Starting task 'waiting on setcal' 2011-Dec-16 05:44:12 LOG5 begin_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2011-Dec-16 05:44:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2011-Dec-16 05:44:12 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-16 05:44:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 05:44:12 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 05:44:12 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-16 05:44:12 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-16 05:44:12 LOG5 end_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2011-Dec-16 05:44:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-16 05:44:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-16 05:44:13 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-16 05:44:13 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-16 05:44:13 LOG5 begin_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2011-Dec-16 05:44:13 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 05:44:13 NOTE WAPPDATA-new_file: New FITS file: wapp.20111216.a2048.0005.fits 2011-Dec-16 05:44:13 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111216.a2048.0005.fits} 2011-Dec-16 05:44:13 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-16 05:44:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-16 05:44:13 LOG5 end_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2011-Dec-16 05:44:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-16 05:44:13 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-16 05:44:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-16 05:44:13 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-16 05:44:13 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-16 05:44:13 LOG5 begin_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2011-Dec-16 05:44:13 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-16 05:44:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-16 05:44:13 LOG5 end_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2011-Dec-16 05:44:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-16 05:44:13 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-16 05:44:13 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-16 05:44:13 LOG5 end_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2011-Dec-16 05:44:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-16 05:44:13 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-16 05:44:13 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-16 05:44:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-16 05:44:13 LOG5 begin_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2011-Dec-16 05:44:13 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-16 05:44:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-16 05:44:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-16 05:44:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-16 05:44:13 LOG5 end_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2011-Dec-16 05:44:13 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-16 05:44:13 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-16 05:44:13 LOG5 begin_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2011-Dec-16 05:44:13 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-16 05:44:13 LOG5 log_alfabeam: Parameters: 9.8676388888888891 23.754333333333335 10.932630 2011.9589022295738 -90.500023 2011-Dec-16 05:44:13 LOG4 log_alfabeam: ALFABEAM 0 9.867638888888893 23.754333333333339 2011-Dec-16 05:44:13 LOG4 log_alfabeam: ALFABEAM 1 9.865550558588765 23.845619266513008 2011-Dec-16 05:44:13 LOG4 log_alfabeam: ALFABEAM 2 9.860186360774422 23.784523307698691 2011-Dec-16 05:44:13 LOG4 log_alfabeam: ALFABEAM 3 9.862304923219545 23.693150382420079 2011-Dec-16 05:44:13 LOG4 log_alfabeam: ALFABEAM 4 9.869762376544571 23.663436250663416 2011-Dec-16 05:44:13 LOG4 log_alfabeam: ALFABEAM 5 9.875087735040546 23.724052849333823 2011-Dec-16 05:44:13 LOG4 log_alfabeam: ALFABEAM 6 9.872994278364200 23.814863319603418 2011-Dec-16 05:44:13 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-16 05:44:13 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-16 05:44:13 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-16 05:44:13 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_006 2011-Dec-16 05:44:13 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-16 05:44:13 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-16 05:44:13 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-16 05:44:13 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-16 05:44:13 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-16 05:44:13 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-16 05:44:13 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-16 05:44:13 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-16 05:44:13 LOG3 take_mock_data: PSET configuration: patternid=135000015 2011-Dec-16 05:44:13 LOG3 take_mock_data: PSET configuration: scanid=135000016 2011-Dec-16 05:44:13 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-16 05:44:13 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-16 05:44:13 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-16 05:44:13 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456359361.0 2011-Dec-16 05:44:13 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306359361.0 2011-Dec-16 05:44:13 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-16 05:44:13 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-16 05:44:13 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_006:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=135000015:scanid=135000016:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456359361.0:topobfreqhz=1306359361.0:filetype=1 2011-Dec-16 05:44:13 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-16 05:44:13 LOG5 begin_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2011-Dec-16 05:44:13 LOG4 from_mock: From MOCK: psetok 2011-Dec-16 05:44:13 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-16 05:44:13 LOG5 end_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2011-Dec-16 05:44:13 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-16 05:44:13 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-16 05:44:13 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-16 05:44:13 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-16 05:44:13 LOG5 begin_task: Level: (5) ID = <10265> Status = 0 0 0 0 ok 2011-Dec-16 05:44:13 LOG4 from_mock: From MOCK: starok 2011-Dec-16 05:44:13 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-16 05:44:13 LOG5 end_task: Level: (5) ID = <10265> Status = 0 0 0 0 ok 2011-Dec-16 05:44:14 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-16 05:44:14 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135000016 2011-Dec-16 05:44:14 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-16 05:44:14 LOG5 begin_task: Level: (5) ID = <10266> Status = 0 0 0 0 ok 2011-Dec-16 05:44:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 05:44:14 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-16 05:44:14 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-16 05:44:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-16 05:44:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35055.00 2011-Dec-16 05:44:16 INFO2 got_mock_message: Mock spectrometer start file number is 01500 2011-Dec-16 05:44:16 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-16 05:44:16 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-16 05:44:16 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-16 05:44:16 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-16 05:44:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-16 05:44:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-16 05:44:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-16 05:44:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-16 05:44:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-16 05:44:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-16 05:44:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-16 05:44:16 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-16 05:44:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 05:44:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 05:44:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 05:44:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 05:44:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 05:44:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 05:44:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 05:44:19 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:44:19.01 2011-Dec-16 05:44:19 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324028659.01 Fri Dec 16 05:44:19 2011 2011-Dec-16 05:44:19 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-16 05:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.359361 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 05:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.359361 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 05:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.359361 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 05:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.359361 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 05:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.359361 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 05:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.359361 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 05:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.359361 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 05:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.359361 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 05:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.359361 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 05:44:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 05:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.510 (still bad) 2011-Dec-16 05:44:25 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-16 05:44:25 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-16 05:44:25 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-16 05:44:25 LOG5 end_task: Level: (5) ID = <10266> Status = 0 0 0 0 ok 2011-Dec-16 05:44:25 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-16 05:44:25 LOG5 end_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2011-Dec-16 05:44:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-16 05:44:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-16 05:44:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-16 05:44:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-16 05:44:25 LOG5 begin_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2011-Dec-16 05:44:25 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-16 05:44:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-16 05:44:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-16 05:44:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-16 05:44:25 LOG5 end_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2011-Dec-16 05:44:25 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-16 05:44:25 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-16 05:44:25 LOG5 begin_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2011-Dec-16 05:44:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-16 05:44:25 LOG5 log_alfabeam: Parameters: 9.8676388888888891 23.754333333333335 10.935694 2011.9589025781427 -90.500023 2011-Dec-16 05:44:25 LOG4 log_alfabeam: ALFABEAM 0 9.867638888888889 23.754333333333314 2011-Dec-16 05:44:25 LOG4 log_alfabeam: ALFABEAM 1 9.865543307953748 23.845587654555203 2011-Dec-16 05:44:25 LOG4 log_alfabeam: ALFABEAM 2 9.860183988362161 23.784412576659467 2011-Dec-16 05:44:25 LOG4 log_alfabeam: ALFABEAM 3 9.862309725888034 23.693071990778513 2011-Dec-16 05:44:25 LOG4 log_alfabeam: ALFABEAM 4 9.869769484390764 23.663467318181940 2011-Dec-16 05:44:25 LOG4 log_alfabeam: ALFABEAM 5 9.875090120417639 23.724163553077982 2011-Dec-16 05:44:25 LOG4 log_alfabeam: ALFABEAM 6 9.872989481530210 23.814943677103521 2011-Dec-16 05:44:25 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-16 05:44:25 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-16 05:44:25 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-16 05:44:25 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_006 2011-Dec-16 05:44:25 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-16 05:44:25 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-16 05:44:25 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-16 05:44:25 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-16 05:44:25 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-16 05:44:25 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-16 05:44:25 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-16 05:44:25 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-16 05:44:25 LOG3 take_mock_data: PSET configuration: patternid=135000015 2011-Dec-16 05:44:25 LOG3 take_mock_data: PSET configuration: scanid=135000017 2011-Dec-16 05:44:25 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-16 05:44:25 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-16 05:44:25 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-16 05:44:25 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456359361.0 2011-Dec-16 05:44:25 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306359361.0 2011-Dec-16 05:44:25 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-16 05:44:25 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-16 05:44:25 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_006:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=135000015:scanid=135000017:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456359361.0:topobfreqhz=1306359361.0:filetype=1 2011-Dec-16 05:44:25 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-16 05:44:25 LOG5 begin_task: Level: (5) ID = <10269> Status = 0 0 0 0 ok 2011-Dec-16 05:44:25 LOG4 from_mock: From MOCK: psetok 2011-Dec-16 05:44:25 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-16 05:44:25 LOG5 end_task: Level: (5) ID = <10269> Status = 0 0 0 0 ok 2011-Dec-16 05:44:25 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-16 05:44:25 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-16 05:44:25 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-16 05:44:25 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-16 05:44:25 LOG5 begin_task: Level: (5) ID = <10270> Status = 0 0 0 0 ok 2011-Dec-16 05:44:25 LOG4 from_mock: From MOCK: starok 2011-Dec-16 05:44:25 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-16 05:44:25 LOG5 end_task: Level: (5) ID = <10270> Status = 0 0 0 0 ok 2011-Dec-16 05:44:25 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-16 05:44:25 INFO2 take_data: Starting WAPP+Mock 5-second scan: 135000017 2011-Dec-16 05:44:25 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-16 05:44:25 LOG5 begin_task: Level: (5) ID = <10271> Status = 0 0 0 0 ok 2011-Dec-16 05:44:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 05:44:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-16 05:44:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35066.00 2011-Dec-16 05:44:26 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-16 05:44:26 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-16 05:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.510 (still bad) 2011-Dec-16 05:44:28 INFO2 got_mock_message: Mock spectrometer start file number is 01600 2011-Dec-16 05:44:28 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-16 05:44:28 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-16 05:44:28 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-16 05:44:28 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-16 05:44:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-16 05:44:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-16 05:44:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-16 05:44:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-16 05:44:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-16 05:44:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-16 05:44:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-16 05:44:28 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-16 05:44:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 05:44:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 05:44:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 05:44:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 05:44:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 05:44:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 05:44:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-16 05:44:31 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:44:31.01 2011-Dec-16 05:44:31 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324028671.01 Fri Dec 16 05:44:31 2011 2011-Dec-16 05:44:31 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-16 05:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.359361 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 05:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.359361 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 05:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.359361 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 05:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.359361 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 05:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.359361 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 05:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.359361 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 05:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.359361 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 05:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.359361 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 05:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.359361 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 05:44:31 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-16 05:44:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 05:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 05:44:37 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-16 05:44:37 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-16 05:44:37 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-16 05:44:37 LOG5 end_task: Level: (5) ID = <10271> Status = 0 0 0 0 ok 2011-Dec-16 05:44:37 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-16 05:44:37 LOG5 end_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2011-Dec-16 05:44:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-16 05:44:37 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-16 05:44:37 LOG5 finish_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2011-Dec-16 05:44:37 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-16 05:44:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 05:44:37 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-16 05:44:37 LOG5 end_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2011-Dec-16 05:44:37 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-16 05:44:37 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 112.70 and ZA = 15.63 2011-Dec-16 05:44:37 LOG3 track_source: Calling 'track_source AGES3193_p3_006 112.70 15.6277002257 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-16 05:44:37 START begin_task: Starting task 'sending tracking commands' 2011-Dec-16 05:44:37 LOG5 begin_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2011-Dec-16 05:44:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_006} INFO {Slewing to source 'AGES3193_p3_006' ...} 2011-Dec-16 05:44:37 INFO1 track_source: Starting to track AGES3193_p3_006 2011-Dec-16 05:44:37 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_006" 2011-Dec-16 05:44:37 LOG3 vw_send: To DATATAKING: set ra 112.70 2011-Dec-16 05:44:37 LOG3 vw_send: To DATATAKING: set dec 15.6277002257 2011-Dec-16 05:44:37 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-16 05:44:37 LOG3 vw_send: To DATATAKING: pnt tr 112.70 15.6277002257 -CF 2011-Dec-16 05:44:37 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 05:44:37 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-16 05:44:37 LOG5 finish_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2011-Dec-16 05:44:37 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-16 05:44:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 05:44:37 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-16 05:44:37 LOG5 end_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2011-Dec-16 05:44:37 LOG1 fixed_driftmap: Parameters: HA = +01:02:59.5 Start = 10:56:41.7 LST = 10:56:20.5 diff = 21.1 secs 2011-Dec-16 05:44:37 INFO2 fixed_driftmap: Waiting 19.1 seconds for RA 9:53:42 2011-Dec-16 05:44:37 INFO2 lstwait: Waiting for 19.1 secs from LST 10:56:21 to LST 10:56:40 ... 2011-Dec-16 05:44:37 LOG4 send_obs_status: To obs_status: <1> TASKTIME 19.076807994866577 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-16 05:44:37 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-16 05:44:37 LOG5 begin_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2011-Dec-16 05:44:37 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_006" 2011-Dec-16 05:44:37 LOG4 got_cormsg: From DATATAKING: set ra 112.70 2011-Dec-16 05:44:37 LOG4 got_cormsg: From DATATAKING: set dec 15.6277002257 2011-Dec-16 05:44:37 LOG4 got_cormsg: From DATATAKING: vw% 112.70 2011-Dec-16 05:44:37 LOG4 got_cormsg: From DATATAKING: vw% 15.6277002257 2011-Dec-16 05:44:37 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 05:44:37 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-16 05:44:37 LOG4 got_cormsg: From DATATAKING: pnt tr 112.70 15.6277002257 -CF 2011-Dec-16 05:44:37 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-16 05:44:37 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-16 05:44:37 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 05:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-16 05:44:56 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-16 05:44:56 LOG5 end_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2011-Dec-16 05:44:56 LOG4 lstwait: Finished waiting 0.93 seconds late 2011-Dec-16 05:44:56 INFO3 lstwait: Finished waiting 2011-Dec-16 05:44:56 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-16 05:44:56 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-16 05:44:56 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-16 05:44:56 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-16 05:44:56 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-16 05:44:56 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-16 05:44:56 LOG5 begin_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2011-Dec-16 05:44:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-16 05:44:56 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-16 05:44:56 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-16 05:44:56 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-16 05:44:56 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-16 05:44:56 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_006 2011-Dec-16 05:44:56 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-16 05:44:56 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-16 05:44:56 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-16 05:44:56 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-16 05:44:56 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-16 05:44:56 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-16 05:44:56 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-16 05:44:56 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-16 05:44:56 LOG3 take_mock_data: PSET configuration: patternid=135000018 2011-Dec-16 05:44:56 LOG3 take_mock_data: PSET configuration: scanid=135000018 2011-Dec-16 05:44:56 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-16 05:44:56 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-16 05:44:56 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-16 05:44:56 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456359361.0 2011-Dec-16 05:44:56 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306359361.0 2011-Dec-16 05:44:56 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-16 05:44:56 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-16 05:44:56 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_006:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=135000018:scanid=135000018:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456359361.0:topobfreqhz=1306359361.0:filetype=1 2011-Dec-16 05:44:56 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-16 05:44:56 LOG5 begin_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2011-Dec-16 05:44:56 LOG4 from_mock: From MOCK: psetok 2011-Dec-16 05:44:56 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-16 05:44:56 LOG5 end_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2011-Dec-16 05:44:56 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-16 05:44:56 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-16 05:44:56 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-16 05:44:56 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-16 05:44:56 LOG5 begin_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2011-Dec-16 05:44:56 LOG4 from_mock: From MOCK: starok 2011-Dec-16 05:44:56 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-16 05:44:56 LOG5 end_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2011-Dec-16 05:44:56 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-16 05:44:56 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 135000018 2011-Dec-16 05:44:57 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-16 05:44:57 LOG5 begin_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2011-Dec-16 05:44:57 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-16 05:44:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 05:44:57 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-16 05:44:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-16 05:44:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35098.00 2011-Dec-16 05:44:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.359361 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 05:44:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.359361 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 05:44:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.359361 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 05:44:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.359361 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 05:44:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.359361 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 05:44:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.359361 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 05:44:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.359361 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 05:44:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.359361 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 05:44:59 INFO2 got_mock_message: Mock spectrometer start file number is 01700 2011-Dec-16 05:44:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.359361 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 05:44:59 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-16 05:44:59 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2011-Dec-16 05:44:59 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-16 05:44:59 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-16 05:44:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-16 05:44:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-16 05:44:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-16 05:44:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-16 05:44:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-16 05:44:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-16 05:44:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-16 05:44:59 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-16 05:44:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 05:44:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 05:44:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 05:44:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 05:44:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 05:44:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 05:44:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-16 05:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:45:02 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:45:02.00 2011-Dec-16 05:45:02 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1324028702.00 Fri Dec 16 05:45:02 2011 2011-Dec-16 05:45:02 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-16 05:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:45:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:45:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 1.115 0.966 0.947 2011-Dec-16 05:45:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 1.078 1.094 0.947 2011-Dec-16 05:45:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.862 0.966 1.029 0.938 2011-Dec-16 05:45:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.919 0.014 1.003 0.014 2011-Dec-16 05:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-16 05:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 05:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2011-Dec-16 05:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-16 05:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2011-Dec-16 05:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-16 05:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 05:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2011-Dec-16 05:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-16 05:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-16 05:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-16 05:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2011-Dec-16 05:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-16 05:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-16 05:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-16 05:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 05:46:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:46:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.114 0.962 0.947 2011-Dec-16 05:46:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.004 1.077 1.094 0.947 2011-Dec-16 05:46:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.864 0.965 1.022 0.929 2011-Dec-16 05:46:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.014 1.004 0.014 2011-Dec-16 05:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 05:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 05:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 05:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 05:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 05:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 05:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 05:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 05:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 05:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 05:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 05:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 05:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 05:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 05:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 05:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-16 05:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 05:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 05:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 05:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-16 05:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 05:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 05:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 05:47:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:47:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.113 0.965 0.946 2011-Dec-16 05:47:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.002 1.072 1.093 0.946 2011-Dec-16 05:47:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.863 0.963 1.018 0.928 2011-Dec-16 05:47:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.920 0.014 1.004 0.014 2011-Dec-16 05:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-16 05:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-16 05:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 05:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 05:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 05:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-16 05:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-16 05:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-16 05:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 05:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-16 05:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-16 05:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-16 05:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-16 05:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-16 05:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-16 05:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-16 05:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-16 05:48:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:48:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 1.112 0.962 0.945 2011-Dec-16 05:48:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 1.070 1.093 0.945 2011-Dec-16 05:48:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.864 0.964 1.021 0.928 2011-Dec-16 05:48:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.014 1.006 0.014 2011-Dec-16 05:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 05:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-16 05:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-16 05:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 05:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-16 05:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-16 05:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-16 05:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-16 05:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:49:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:49:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 1.105 0.967 0.951 2011-Dec-16 05:49:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 1.069 1.096 0.944 2011-Dec-16 05:49:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.861 0.963 1.021 0.928 2011-Dec-16 05:49:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.014 1.006 0.014 2011-Dec-16 05:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:50:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:50:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.108 0.965 0.945 2011-Dec-16 05:50:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 1.070 1.093 0.944 2011-Dec-16 05:50:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.863 0.964 1.020 0.929 2011-Dec-16 05:50:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.014 1.014 0.014 2011-Dec-16 05:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:51:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:51:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.103 0.964 0.943 2011-Dec-16 05:51:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 1.075 1.094 0.944 2011-Dec-16 05:51:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.863 0.965 1.022 0.928 2011-Dec-16 05:51:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.014 1.008 0.014 2011-Dec-16 05:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 05:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 05:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 05:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 05:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 05:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 05:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 05:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 05:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:52:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:52:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.103 0.964 0.942 2011-Dec-16 05:52:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 1.072 1.094 0.943 2011-Dec-16 05:52:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.867 0.967 1.026 0.932 2011-Dec-16 05:52:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.014 1.007 0.014 2011-Dec-16 05:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 05:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 05:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 05:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 05:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 05:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 05:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-16 05:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-16 05:53:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:53:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.100 0.964 0.942 2011-Dec-16 05:53:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 1.072 1.109 0.958 2011-Dec-16 05:53:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 0.968 1.020 0.929 2011-Dec-16 05:53:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.014 1.007 0.014 2011-Dec-16 05:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 05:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 05:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 05:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 05:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-16 05:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-16 05:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 05:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 05:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:54:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:54:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.099 0.966 0.942 2011-Dec-16 05:54:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 1.074 1.093 0.943 2011-Dec-16 05:54:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.865 0.966 1.023 0.928 2011-Dec-16 05:54:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 0.014 1.012 0.014 2011-Dec-16 05:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 05:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 05:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 05:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 05:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 05:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 05:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 05:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 05:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 05:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 05:55:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:55:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 1.100 0.964 0.941 2011-Dec-16 05:55:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 1.074 1.092 0.942 2011-Dec-16 05:55:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.864 0.963 1.019 0.929 2011-Dec-16 05:55:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.014 1.010 0.014 2011-Dec-16 05:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 05:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 05:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 05:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 05:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 05:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 05:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 05:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 05:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 05:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 05:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 05:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 05:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 05:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 05:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:56:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:56:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 1.099 0.963 0.941 2011-Dec-16 05:56:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.998 1.071 1.094 0.943 2011-Dec-16 05:56:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.865 0.966 1.022 0.933 2011-Dec-16 05:56:25 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.014 1.014 0.014 2011-Dec-16 05:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-16 05:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-16 05:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 05:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 05:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-16 05:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-16 05:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-16 05:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 05:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2011-Dec-16 05:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 05:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 05:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 05:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 05:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:57:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:57:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.926 1.096 0.969 0.944 2011-Dec-16 05:57:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.002 1.073 1.095 0.943 2011-Dec-16 05:57:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.863 0.963 1.020 0.927 2011-Dec-16 05:57:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.014 1.008 0.014 2011-Dec-16 05:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-16 05:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 05:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2011-Dec-16 05:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-16 05:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 05:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-16 05:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-16 05:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 05:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 05:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-16 05:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 05:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 05:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 05:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 05:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 05:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 05:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 05:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 05:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 05:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 05:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 05:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 05:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:58:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:58:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 1.098 0.964 0.937 2011-Dec-16 05:58:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.997 1.065 1.096 0.941 2011-Dec-16 05:58:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.864 0.961 1.019 0.928 2011-Dec-16 05:58:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.014 1.006 0.014 2011-Dec-16 05:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 05:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 05:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 05:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 05:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 05:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 05:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 05:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 05:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 05:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 05:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 05:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 05:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 05:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 05:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 05:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 05:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 05:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-16 05:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 05:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 05:59:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 05:59:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.926 1.097 0.964 0.937 2011-Dec-16 05:59:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.997 1.066 1.091 0.941 2011-Dec-16 05:59:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.863 0.961 1.019 0.928 2011-Dec-16 05:59:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.014 1.009 0.014 2011-Dec-16 05:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 05:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 05:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-16 05:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 05:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 05:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 05:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 05:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 05:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 05:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 05:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 06:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 06:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 06:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 06:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 06:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 06:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 06:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-16 06:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 06:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 06:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 06:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 06:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 06:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 06:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 06:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-16 06:00:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 06:00:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 1.098 0.964 0.937 2011-Dec-16 06:00:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.996 1.065 1.092 0.941 2011-Dec-16 06:00:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.877 0.988 1.022 0.927 2011-Dec-16 06:00:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.014 1.009 0.014 2011-Dec-16 06:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 06:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 06:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 06:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 06:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 06:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 06:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 06:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 06:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 06:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-16 06:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-16 06:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-16 06:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 06:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-16 06:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-16 06:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-16 06:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-16 06:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-16 06:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 06:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 06:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 06:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 06:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 06:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 06:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 06:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 06:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 06:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 06:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 06:01:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 06:01:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.099 0.968 0.942 2011-Dec-16 06:01:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.997 1.067 1.093 0.942 2011-Dec-16 06:01:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.863 0.962 1.024 0.928 2011-Dec-16 06:01:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.014 1.009 0.014 2011-Dec-16 06:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 06:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 06:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 06:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 06:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 06:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 06:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 06:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 06:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 06:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 06:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 06:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 06:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 06:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 06:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 06:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 06:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 06:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 06:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 06:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 06:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-16 06:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 06:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 06:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 06:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-16 06:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 06:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 06:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 06:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 06:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 06:02:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 06:02:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 1.098 0.965 0.940 2011-Dec-16 06:02:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 1.068 1.091 0.940 2011-Dec-16 06:02:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.863 0.962 1.018 0.925 2011-Dec-16 06:02:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.014 1.009 0.014 2011-Dec-16 06:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 06:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 06:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 06:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 06:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 06:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 06:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 06:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 06:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 06:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 06:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-16 06:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2011-Dec-16 06:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-16 06:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 06:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-16 06:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 06:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-16 06:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 06:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2011-Dec-16 06:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 06:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-16 06:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-16 06:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-16 06:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 06:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-16 06:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 06:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 06:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-16 06:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 06:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-16 06:03:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 06:03:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 1.094 0.963 0.937 2011-Dec-16 06:03:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.996 1.066 1.090 0.940 2011-Dec-16 06:03:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.863 0.962 1.023 0.929 2011-Dec-16 06:03:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.014 1.007 0.014 2011-Dec-16 06:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 06:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 06:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-16 06:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-16 06:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2011-Dec-16 06:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 06:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-16 06:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 06:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 06:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 06:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 06:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 06:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-16 06:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 06:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-16 06:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2011-Dec-16 06:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2011-Dec-16 06:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 06:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 06:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 06:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2011-Dec-16 06:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 06:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-16 06:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-16 06:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-16 06:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 06:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-16 06:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-16 06:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-16 06:04:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 06:04:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.924 1.095 0.969 0.943 2011-Dec-16 06:04:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.997 1.063 1.090 0.940 2011-Dec-16 06:04:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.863 0.963 1.018 0.930 2011-Dec-16 06:04:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.014 1.009 0.014 2011-Dec-16 06:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 06:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2011-Dec-16 06:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2011-Dec-16 06:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-16 06:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-16 06:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-16 06:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-16 06:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-16 06:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-16 06:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-16 06:04:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 06:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-16 06:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-16 06:05:03 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-16 06:05:03 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-16 06:05:03 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-16 06:05:03 LOG5 end_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2011-Dec-16 06:05:03 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-16 06:05:03 LOG5 end_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2011-Dec-16 06:05:03 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-16 06:05:03 LOG5 finish_task: Level: (2) ID = <10235> Status = 0 0 0 0 ok 2011-Dec-16 06:05:03 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-16 06:05:03 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-16 06:05:03 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-16 06:05:03 LOG5 end_task: Level: (2) ID = <10235> Status = 0 0 0 0 ok 2011-Dec-16 06:05:03 COMMAND run_command_line: EXECUTING command 48: 'ENDIF' 2011-Dec-16 06:05:03 COMMAND run_command_line: EXECUTING command 55: 'LOAD togs_cima31.conf' 2011-Dec-16 06:05:03 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2011-Dec-16 06:05:03 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-16 06:05:03 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2011-Dec-16 06:05:03 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima31.conf' 2011-Dec-16 06:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-16 06:05:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2011-Dec-16 06:05:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2011-Dec-16 06:05:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2011-Dec-16 06:05:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2011-Dec-16 06:05:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2011-Dec-16 06:05:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2011-Dec-16 06:05:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2011-Dec-16 06:05:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2011-Dec-16 06:05:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2011-Dec-16 06:05:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2011-Dec-16 06:05:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2011-Dec-16 06:05:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-16 06:05:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-16 06:05:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-16 06:05:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-16 06:05:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2011-Dec-16 06:05:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2011-Dec-16 06:05:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2011-Dec-16 06:05:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2011-Dec-16 06:05:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2011-Dec-16 06:05:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2011-Dec-16 06:05:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2011-Dec-16 06:05:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2011-Dec-16 06:05:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-16 06:05:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-16 06:05:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-16 06:05:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-16 06:05:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2011-Dec-16 06:05:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2011-Dec-16 06:05:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2011-Dec-16 06:05:05 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-16 06:05:05 BEGIN begin_task: Starting task 'configuring IF/LO path' 2011-Dec-16 06:05:05 LOG5 begin_task: Level: (2) ID = <10278> Status = 0 0 0 0 ok 2011-Dec-16 06:05:05 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2011-Dec-16 06:05:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2011-Dec-16 06:05:05 LOG1 config_iflo: Receiver ALFA already selected 2011-Dec-16 06:05:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-16 06:05:05 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-16 06:05:05 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-16 06:05:05 LOG5 begin_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2011-Dec-16 06:05:05 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-16 06:05:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-16 06:05:05 LOG5 end_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2011-Dec-16 06:05:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-16 06:05:05 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-16 06:05:05 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2011-Dec-16 06:05:05 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2011-Dec-16 06:05:05 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2011-Dec-16 06:05:05 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2011-Dec-16 06:05:05 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2011-Dec-16 06:05:05 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2011-Dec-16 06:05:05 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2011-Dec-16 06:05:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2011-Dec-16 06:05:05 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2011-Dec-16 06:05:05 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2011-Dec-16 06:05:05 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2011-Dec-16 06:05:05 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2011-Dec-16 06:05:05 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2011-Dec-16 06:05:05 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2011-Dec-16 06:05:05 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2011-Dec-16 06:05:05 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2011-Dec-16 06:05:05 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2011-Dec-16 06:05:05 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2011-Dec-16 06:05:05 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2011-Dec-16 06:05:05 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2011-Dec-16 06:05:05 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2011-Dec-16 06:05:05 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2011-Dec-16 06:05:05 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2011-Dec-16 06:05:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:05:05 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2011-Dec-16 06:05:05 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2011-Dec-16 06:05:05 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2011-Dec-16 06:05:05 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2011-Dec-16 06:05:05 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2011-Dec-16 06:05:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2011-Dec-16 06:05:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 06:05:05 START begin_task: Starting task 'waiting on configuring IF/LO path' 2011-Dec-16 06:05:05 LOG5 begin_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2011-Dec-16 06:05:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2011-Dec-16 06:05:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2011-Dec-16 06:05:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:05:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 06:05:06 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:05:06 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:05:06 LOG4 got_cormsg: From DATATAKING: vw% DONE 2011-Dec-16 06:05:06 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2011-Dec-16 06:05:06 LOG5 end_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2011-Dec-16 06:05:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2011-Dec-16 06:05:06 STOP finish_task: Finishing task 'configuring IF/LO path' 2011-Dec-16 06:05:06 LOG5 finish_task: Level: (2) ID = <10278> Status = 0 0 0 0 ok 2011-Dec-16 06:05:06 DONE finish_task: DONE finished configuration: IF/LO path 2011-Dec-16 06:05:06 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-16 06:05:07 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2011-Dec-16 06:05:07 LOG5 end_task: Level: (2) ID = <10278> Status = 0 0 0 0 ok 2011-Dec-16 06:05:07 BEGIN begin_task: Starting task 'configuring WAPPs' 2011-Dec-16 06:05:07 LOG5 begin_task: Level: (2) ID = <10281> Status = 0 0 0 0 ok 2011-Dec-16 06:05:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2011-Dec-16 06:05:07 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2011-Dec-16 06:05:07 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Dec-16 06:05:07 START begin_task: Starting task 'selecting calibration port' 2011-Dec-16 06:05:07 LOG5 begin_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2011-Dec-16 06:05:07 LOG3 vw_send: To DATATAKING: calport 3 2011-Dec-16 06:05:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Dec-16 06:05:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 06:05:07 START begin_task: Starting task 'waiting on calport' 2011-Dec-16 06:05:07 LOG5 begin_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2011-Dec-16 06:05:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:05:07 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Dec-16 06:05:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 06:05:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:05:07 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-16 06:05:07 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Dec-16 06:05:07 LOG5 end_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2011-Dec-16 06:05:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Dec-16 06:05:07 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Dec-16 06:05:07 LOG5 end_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2011-Dec-16 06:05:07 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-16 06:05:07 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-16 06:05:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-16 06:05:07 LOG5 begin_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2011-Dec-16 06:05:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:05:07 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-16 06:05:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-16 06:05:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-16 06:05:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-16 06:05:07 LOG5 end_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2011-Dec-16 06:05:07 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2011-Dec-16 06:05:07 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2011-Dec-16 06:05:07 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2011-Dec-16 06:05:07 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2011-Dec-16 06:05:07 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2011-Dec-16 06:05:07 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2011-Dec-16 06:05:07 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2011-Dec-16 06:05:07 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2011-Dec-16 06:05:07 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2011-Dec-16 06:05:07 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2011-Dec-16 06:05:07 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2011-Dec-16 06:05:07 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2011-Dec-16 06:05:07 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Dec-16 06:05:07 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Dec-16 06:05:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-16 06:05:07 LOG5 begin_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2011-Dec-16 06:05:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2011-Dec-16 06:05:07 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-16 06:05:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2011-Dec-16 06:05:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-16 06:05:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2011-Dec-16 06:05:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-16 06:05:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-16 06:05:07 LOG5 end_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2011-Dec-16 06:05:07 LOG3 sock_errsend: To WAPPDATA: FLUSH 2011-Dec-16 06:05:07 STOP finish_task: Finishing task 'configuring WAPPs' 2011-Dec-16 06:05:07 LOG5 finish_task: Level: (2) ID = <10281> Status = 0 0 0 0 ok 2011-Dec-16 06:05:07 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2011-Dec-16 06:05:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-16 06:05:08 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2011-Dec-16 06:05:08 LOG5 end_task: Level: (2) ID = <10281> Status = 0 0 0 0 ok 2011-Dec-16 06:05:08 COMMAND run_command_line: EXECUTING command 56: 'TRACKCURPOS' 2011-Dec-16 06:05:08 BEGIN begin_task: Starting task 'tracking current position' 2011-Dec-16 06:05:08 LOG5 begin_task: Level: (2) ID = <10286> Status = 0 0 0 0 ok 2011-Dec-16 06:05:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2011-Dec-16 06:05:08 INFO1 track_current_pos: Starting to track the current commanded position RA = 10:13:15.0 and Dec = +23:45:41.0 2011-Dec-16 06:05:08 LOG3 track_source: Calling 'track_source Cur-pos 101315.0 234541.0 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2011-Dec-16 06:05:08 START begin_task: Starting task 'sending tracking commands' 2011-Dec-16 06:05:08 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2011-Dec-16 06:05:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2011-Dec-16 06:05:08 INFO1 track_source: Starting to track Cur-pos 2011-Dec-16 06:05:08 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2011-Dec-16 06:05:08 LOG3 vw_send: To DATATAKING: set ra 101315.0 2011-Dec-16 06:05:08 LOG3 vw_send: To DATATAKING: set dec 234541.0 2011-Dec-16 06:05:08 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-16 06:05:08 LOG3 vw_send: To DATATAKING: pnt tr 101315.0 234541.0 -CJ 2011-Dec-16 06:05:08 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2011-Dec-16 06:05:08 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-16 06:05:08 LOG5 finish_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2011-Dec-16 06:05:08 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-16 06:05:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 06:05:08 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-16 06:05:08 LOG5 end_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2011-Dec-16 06:05:08 START begin_task: Starting task 'waiting on telescope' 2011-Dec-16 06:05:08 LOG5 begin_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2011-Dec-16 06:05:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-16 06:05:08 LOG3 waittrk: Start waittrk 5 2011-Dec-16 06:05:08 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-16 06:05:08 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2011-Dec-16 06:05:08 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2011-Dec-16 06:05:08 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2011-Dec-16 06:05:08 LOG4 got_cormsg: From DATATAKING: set ra 101315.0 2011-Dec-16 06:05:08 LOG4 got_cormsg: From DATATAKING: set dec 234541.0 2011-Dec-16 06:05:08 LOG4 got_cormsg: From DATATAKING: vw% 101315.0 2011-Dec-16 06:05:08 LOG4 got_cormsg: From DATATAKING: vw% 234541.0 2011-Dec-16 06:05:08 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:05:08 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-16 06:05:08 LOG4 got_cormsg: From DATATAKING: pnt tr 101315.0 234541.0 -CJ 2011-Dec-16 06:05:08 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2011-Dec-16 06:05:08 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-16 06:05:08 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:05:13 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-16 06:05:13 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2011-Dec-16 06:05:13 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-16 06:05:13 LOG5 begin_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2011-Dec-16 06:05:17 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-16 06:05:17 LOG5 end_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2011-Dec-16 06:05:17 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-16 06:05:17 INFO2 waittrk: Now tracking Cur-pos 2011-Dec-16 06:05:17 LOG4 waittrk: Current telescope position: Az = 112.39 ZA = 15.68 2011-Dec-16 06:05:17 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-16 06:05:17 LOG5 finish_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2011-Dec-16 06:05:17 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-16 06:05:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 06:05:17 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-16 06:05:17 LOG5 end_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2011-Dec-16 06:05:17 STOP finish_task: Finishing task 'tracking current position' 2011-Dec-16 06:05:17 LOG5 finish_task: Level: (2) ID = <10286> Status = 0 0 0 0 ok 2011-Dec-16 06:05:17 DONE finish_task: DONE finished tracking: current position 2011-Dec-16 06:05:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-16 06:05:17 END end_task: Finishing task 'tracking current position' with status 'OK' 2011-Dec-16 06:05:17 LOG5 end_task: Level: (2) ID = <10286> Status = 0 0 0 0 ok 2011-Dec-16 06:05:18 COMMAND run_command_line: EXECUTING command 57: 'ALFAANGLE 19' 2011-Dec-16 06:05:18 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2011-Dec-16 06:05:18 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2011-Dec-16 06:05:18 LOG5 begin_task: Level: (2) ID = <10291> Status = 0 0 0 0 ok 2011-Dec-16 06:05:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2011-Dec-16 06:05:18 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2011-Dec-16 06:05:18 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2011-Dec-16 06:05:18 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-16 06:05:18 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-16 06:05:18 LOG5 begin_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2011-Dec-16 06:06:19 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-16 06:06:19 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2011-Dec-16 06:06:19 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-16 06:06:19 LOG5 end_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2011-Dec-16 06:06:19 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-16 06:06:19 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2011-Dec-16 06:06:19 LOG5 finish_task: Level: (2) ID = <10291> Status = 0 0 0 0 ok 2011-Dec-16 06:06:19 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2011-Dec-16 06:06:19 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-16 06:06:19 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2011-Dec-16 06:06:19 LOG5 end_task: Level: (2) ID = <10291> Status = 0 0 0 0 ok 2011-Dec-16 06:06:19 COMMAND run_command_line: EXECUTING command 61: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2011-Dec-16 06:06:19 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2011-Dec-16 06:06:20 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-16 06:06:20 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2011-Dec-16 06:06:20 BEGIN begin_task: Starting task 'smart frequency switching' 2011-Dec-16 06:06:20 LOG5 begin_task: Level: (2) ID = <10293> Status = 0 0 0 0 ok 2011-Dec-16 06:06:20 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2011-Dec-16 06:06:20 INFO1 smartfreq: Starting pattern: Smart frequency switching 2011-Dec-16 06:06:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2011-Dec-16 06:06:20 START begin_task: Starting task 'selecting calibration type' 2011-Dec-16 06:06:20 LOG5 begin_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2011-Dec-16 06:06:20 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-16 06:06:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-16 06:06:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 06:06:20 START begin_task: Starting task 'waiting on setcal' 2011-Dec-16 06:06:20 LOG5 begin_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2011-Dec-16 06:06:20 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-16 06:06:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 06:06:20 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:06:20 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-16 06:06:20 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-16 06:06:20 LOG5 end_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2011-Dec-16 06:06:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-16 06:06:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-16 06:06:20 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-16 06:06:20 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-16 06:06:20 LOG5 begin_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2011-Dec-16 06:06:20 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:06:20 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-16 06:06:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-16 06:06:20 LOG5 end_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2011-Dec-16 06:06:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-16 06:06:20 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-16 06:06:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-16 06:06:20 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-16 06:06:20 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-16 06:06:20 LOG5 begin_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2011-Dec-16 06:06:20 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-16 06:06:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-16 06:06:20 LOG5 end_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2011-Dec-16 06:06:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-16 06:06:20 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-16 06:06:20 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-16 06:06:20 LOG5 end_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2011-Dec-16 06:06:20 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2011-Dec-16 06:06:20 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2011-Dec-16 06:06:20 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2011-Dec-16 06:06:20 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2011-Dec-16 06:06:20 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2011-Dec-16 06:06:20 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-16 06:06:20 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2011-Dec-16 06:06:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-16 06:06:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-16 06:06:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-16 06:06:21 LOG5 begin_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2011-Dec-16 06:06:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2011-Dec-16 06:06:21 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-16 06:06:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-16 06:06:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-16 06:06:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-16 06:06:21 LOG5 end_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2011-Dec-16 06:06:21 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2011-Dec-16 06:06:21 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-16 06:06:21 LOG5 begin_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2011-Dec-16 06:06:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2011-Dec-16 06:06:21 INFO2 adjust_power: Starting to adjust WAPP power 2011-Dec-16 06:06:21 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-16 06:06:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-16 06:06:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 06:06:21 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-16 06:06:21 LOG5 begin_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2011-Dec-16 06:06:21 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-16 06:06:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-16 06:06:21 NOTE WAPPDATA-new_file: New FITS file: wapp.20111216.a2048.0006.fits 2011-Dec-16 06:06:21 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111216.a2048.0006.fits} 2011-Dec-16 06:06:24 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:06:24 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-16 06:06:24 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-16 06:06:24 LOG5 end_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2011-Dec-16 06:06:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-16 06:06:24 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-16 06:06:24 LOG5 begin_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2011-Dec-16 06:06:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-16 06:06:24 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-16 06:06:24 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-16 06:06:24 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-16 06:06:24 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-16 06:06:24 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-16 06:06:24 LOG5 begin_task: Level: (5) ID = <10302> Status = 0 0 0 0 ok 2011-Dec-16 06:06:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-16 06:06:24 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:06:24 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 8 6 dB 2011-Dec-16 06:06:24 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 3 3 dB 2011-Dec-16 06:06:24 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 3 dB 2011-Dec-16 06:06:24 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2011-Dec-16 06:06:24 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-16 06:06:24 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-16 06:06:24 LOG5 end_task: Level: (5) ID = <10302> Status = 0 0 0 0 ok 2011-Dec-16 06:06:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.918 1.117 ALFA beam 1: 0.979 1.020 2011-Dec-16 06:06:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.956 1.068 ALFA beam 3: 1.098 0.957 2011-Dec-16 06:06:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.871 0.957 ALFA beam 5: 0.967 1.113 2011-Dec-16 06:06:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.924 0.014 ALFA beam 7: 1.011 0.014 2011-Dec-16 06:06:25 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-16 06:06:25 LOG5 finish_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2011-Dec-16 06:06:25 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-16 06:06:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 06:06:25 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-16 06:06:25 LOG5 end_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2011-Dec-16 06:06:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-16 06:06:25 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-16 06:06:25 LOG5 finish_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2011-Dec-16 06:06:25 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2011-Dec-16 06:06:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-16 06:06:25 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-16 06:06:25 LOG5 end_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2011-Dec-16 06:06:25 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2011-Dec-16 06:06:25 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-16 06:06:25 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2011-Dec-16 06:06:25 LOG5 antvel: Calling 'antvel 101315.000000 234541.000000 J Topocentric 0' 2011-Dec-16 06:06:25 LOG2 antvel: Precessing RA = 10:13:15.0 Dec = +23:45:41.0 Epoch = 2011.95894 J 2011-Dec-16 06:06:25 LOG2 antvel: Computed apparent RA = 10:13:56.5 Dec = +23:41:52.4 2011-Dec-16 06:06:25 LOG2 antvel: Parameters to Doppler: Topocentric 36384 2011 350 0.0 2011-Dec-16 06:06:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-16 06:06:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2011-Dec-16 06:06:25 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2011-Dec-16 06:06:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-16 06:06:25 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-16 06:06:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-16 06:06:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:06:25 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2011-Dec-16 06:06:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-16 06:06:25 LOG5 begin_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2011-Dec-16 06:06:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-16 06:06:25 LOG5 log_alfabeam: Parameters: 10.220833333333333 23.761388888888888 11.303364 2011.9589444064186 18.999933 2011-Dec-16 06:06:25 LOG4 log_alfabeam: ALFABEAM 0 10.220833333333337 23.761388888888892 2011-Dec-16 06:06:25 LOG4 log_alfabeam: ALFABEAM 1 10.228503702199376 23.748110205050622 2011-Dec-16 06:06:25 LOG4 log_alfabeam: ALFABEAM 2 10.225066791582714 23.834077184765182 2011-Dec-16 06:06:25 LOG4 log_alfabeam: ALFABEAM 3 10.217393551616956 23.847690763198404 2011-Dec-16 06:06:25 LOG4 log_alfabeam: ALFABEAM 4 10.213158074754608 23.774362684563620 2011-Dec-16 06:06:25 LOG4 log_alfabeam: ALFABEAM 5 10.216628901230273 23.688192252042821 2011-Dec-16 06:06:25 LOG4 log_alfabeam: ALFABEAM 6 10.224301159041252 23.675553262376127 2011-Dec-16 06:06:25 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135000019 2011-Dec-16 06:06:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-16 06:06:25 LOG5 begin_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2011-Dec-16 06:06:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 06:06:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-16 06:06:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:06:25 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:06:25 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:06:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-16 06:06:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36386.00 2011-Dec-16 06:06:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 06:06:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:06:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:06:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 06:06:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:06:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:06:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:06:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 06:06:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 06:06:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 06:06:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.918 1.117 0.979 1.020 2011-Dec-16 06:06:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.956 1.068 1.098 0.957 2011-Dec-16 06:06:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.871 0.957 0.967 1.113 2011-Dec-16 06:06:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.014 1.011 0.014 2011-Dec-16 06:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 06:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 06:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-16 06:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 06:06:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 06:06:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-16 06:06:36 LOG5 end_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2011-Dec-16 06:06:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-16 06:06:36 LOG5 end_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2011-Dec-16 06:06:36 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2011-Dec-16 06:06:36 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-16 06:06:36 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2011-Dec-16 06:06:36 LOG5 antvel: Calling 'antvel 101315.000000 234541.000000 J Topocentric 0' 2011-Dec-16 06:06:36 LOG2 antvel: Precessing RA = 10:13:15.0 Dec = +23:45:41.0 Epoch = 2011.95894 J 2011-Dec-16 06:06:36 LOG2 antvel: Computed apparent RA = 10:13:56.5 Dec = +23:41:52.4 2011-Dec-16 06:06:36 LOG2 antvel: Parameters to Doppler: Topocentric 36396 2011 350 0.0 2011-Dec-16 06:06:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-16 06:06:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2011-Dec-16 06:06:36 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2011-Dec-16 06:06:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-16 06:06:36 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-16 06:06:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-16 06:06:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:06:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2011-Dec-16 06:06:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-16 06:06:36 LOG5 begin_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2011-Dec-16 06:06:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-16 06:06:36 LOG5 log_alfabeam: Parameters: 10.220833333333333 23.761388888888888 11.306707 2011.9589447866756 18.999933 2011-Dec-16 06:06:36 LOG4 log_alfabeam: ALFABEAM 0 10.220833333333340 23.761388888888884 2011-Dec-16 06:06:36 LOG4 log_alfabeam: ALFABEAM 1 10.228504819484122 23.748231817775423 2011-Dec-16 06:06:36 LOG4 log_alfabeam: ALFABEAM 2 10.225060653015166 23.834144778690270 2011-Dec-16 06:06:36 LOG4 log_alfabeam: ALFABEAM 3 10.217386261788890 23.847635614372880 2011-Dec-16 06:06:36 LOG4 log_alfabeam: ALFABEAM 4 10.213156999642278 23.774241633059699 2011-Dec-16 06:06:36 LOG4 log_alfabeam: ALFABEAM 5 10.216635007009897 23.688126518319084 2011-Dec-16 06:06:36 LOG4 log_alfabeam: ALFABEAM 6 10.224308307005748 23.675607447922882 2011-Dec-16 06:06:36 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135000020 2011-Dec-16 06:06:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-16 06:06:37 LOG5 begin_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2011-Dec-16 06:06:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 06:06:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-16 06:06:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:06:37 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:06:37 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:06:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-16 06:06:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36398.00 2011-Dec-16 06:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.147 (still bad) 2011-Dec-16 06:06:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 06:06:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:06:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:06:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 06:06:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:06:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:06:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:06:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 06:06:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 06:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.179 (still bad) 2011-Dec-16 06:06:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.177 (still bad) 2011-Dec-16 06:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.177 (still bad) 2011-Dec-16 06:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.177 (still bad) 2011-Dec-16 06:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.177 (still bad) 2011-Dec-16 06:06:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 06:06:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-16 06:06:48 LOG5 end_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2011-Dec-16 06:06:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-16 06:06:48 LOG5 end_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2011-Dec-16 06:06:48 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2011-Dec-16 06:06:48 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-16 06:06:48 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2011-Dec-16 06:06:48 LOG5 antvel: Calling 'antvel 101315.000000 234541.000000 J Topocentric 0' 2011-Dec-16 06:06:48 LOG2 antvel: Precessing RA = 10:13:15.0 Dec = +23:45:41.0 Epoch = 2011.95895 J 2011-Dec-16 06:06:48 LOG2 antvel: Computed apparent RA = 10:13:56.5 Dec = +23:41:52.4 2011-Dec-16 06:06:48 LOG2 antvel: Parameters to Doppler: Topocentric 36408 2011 350 0.0 2011-Dec-16 06:06:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-16 06:06:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2011-Dec-16 06:06:48 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2011-Dec-16 06:06:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-16 06:06:48 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-16 06:06:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-16 06:06:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:06:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2011-Dec-16 06:06:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-16 06:06:48 LOG5 begin_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2011-Dec-16 06:06:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-16 06:06:48 LOG5 log_alfabeam: Parameters: 10.220833333333333 23.761388888888888 11.310049 2011.9589451669328 18.999933 2011-Dec-16 06:06:48 LOG4 log_alfabeam: ALFABEAM 0 10.220833333333335 23.761388888888884 2011-Dec-16 06:06:48 LOG4 log_alfabeam: ALFABEAM 1 10.228505921041506 23.748352841129066 2011-Dec-16 06:06:48 LOG4 log_alfabeam: ALFABEAM 2 10.225054539394893 23.834211938180832 2011-Dec-16 06:06:48 LOG4 log_alfabeam: ALFABEAM 3 10.217379013015019 23.847580625825064 2011-Dec-16 06:06:48 LOG4 log_alfabeam: ALFABEAM 4 10.213155939949866 23.774121168730254 2011-Dec-16 06:06:48 LOG4 log_alfabeam: ALFABEAM 5 10.216641087738887 23.688061207663303 2011-Dec-16 06:06:48 LOG4 log_alfabeam: ALFABEAM 6 10.224315414870404 23.675661474749436 2011-Dec-16 06:06:48 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135000021 2011-Dec-16 06:06:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-16 06:06:49 LOG5 begin_task: Level: (4) ID = <10308> Status = 0 0 0 0 ok 2011-Dec-16 06:06:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 06:06:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-16 06:06:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:06:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:06:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:06:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-16 06:06:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36410.00 2011-Dec-16 06:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.178 (still bad) 2011-Dec-16 06:06:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 06:06:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:06:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:06:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 06:06:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:06:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:06:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:06:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 06:06:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 06:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.174 (still bad) 2011-Dec-16 06:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.173 (still bad) 2011-Dec-16 06:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.176 (still bad) 2011-Dec-16 06:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.174 (still bad) 2011-Dec-16 06:07:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 06:07:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-16 06:07:00 LOG5 end_task: Level: (4) ID = <10308> Status = 0 0 0 0 ok 2011-Dec-16 06:07:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-16 06:07:00 LOG5 end_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2011-Dec-16 06:07:00 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2011-Dec-16 06:07:00 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-16 06:07:00 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2011-Dec-16 06:07:00 LOG5 antvel: Calling 'antvel 101315.000000 234541.000000 J Topocentric 0' 2011-Dec-16 06:07:00 LOG2 antvel: Precessing RA = 10:13:15.0 Dec = +23:45:41.0 Epoch = 2011.95895 J 2011-Dec-16 06:07:00 LOG2 antvel: Computed apparent RA = 10:13:56.5 Dec = +23:41:52.4 2011-Dec-16 06:07:00 LOG2 antvel: Parameters to Doppler: Topocentric 36420 2011 350 0.0 2011-Dec-16 06:07:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-16 06:07:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2011-Dec-16 06:07:00 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2011-Dec-16 06:07:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-16 06:07:00 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-16 06:07:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-16 06:07:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:07:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2011-Dec-16 06:07:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-16 06:07:00 LOG5 begin_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2011-Dec-16 06:07:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-16 06:07:00 LOG5 log_alfabeam: Parameters: 10.220833333333333 23.761388888888888 11.313392 2011.9589455471898 18.999933 2011-Dec-16 06:07:00 LOG4 log_alfabeam: ALFABEAM 0 10.220833333333337 23.761388888888892 2011-Dec-16 06:07:00 LOG4 log_alfabeam: ALFABEAM 1 10.228507007713196 23.748473351656994 2011-Dec-16 06:07:00 LOG4 log_alfabeam: ALFABEAM 2 10.225048446922832 23.834278707212039 2011-Dec-16 06:07:00 LOG4 log_alfabeam: ALFABEAM 3 10.217371800630323 23.847525764284992 2011-Dec-16 06:07:00 LOG4 log_alfabeam: ALFABEAM 4 10.213154894863582 23.774001215370543 2011-Dec-16 06:07:00 LOG4 log_alfabeam: ALFABEAM 5 10.216647147199915 23.687996277291482 2011-Dec-16 06:07:00 LOG4 log_alfabeam: ALFABEAM 6 10.224322487208074 23.675715375574999 2011-Dec-16 06:07:00 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135000022 2011-Dec-16 06:07:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-16 06:07:01 LOG5 begin_task: Level: (4) ID = <10310> Status = 0 0 0 0 ok 2011-Dec-16 06:07:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 06:07:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-16 06:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.175 (still bad) 2011-Dec-16 06:07:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:07:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:07:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:07:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-16 06:07:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36422.00 2011-Dec-16 06:07:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 06:07:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:07:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:07:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 06:07:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:07:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:07:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:07:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 06:07:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 06:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.168 (still bad) 2011-Dec-16 06:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.164 (still bad) 2011-Dec-16 06:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.164 (still bad) 2011-Dec-16 06:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.165 (still bad) 2011-Dec-16 06:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.167 (still bad) 2011-Dec-16 06:07:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 06:07:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-16 06:07:12 LOG5 end_task: Level: (4) ID = <10310> Status = 0 0 0 0 ok 2011-Dec-16 06:07:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-16 06:07:12 LOG5 end_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2011-Dec-16 06:07:12 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2011-Dec-16 06:07:12 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-16 06:07:12 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2011-Dec-16 06:07:12 LOG5 antvel: Calling 'antvel 101315.000000 234541.000000 J Topocentric 0' 2011-Dec-16 06:07:12 LOG2 antvel: Precessing RA = 10:13:15.0 Dec = +23:45:41.0 Epoch = 2011.95895 J 2011-Dec-16 06:07:12 LOG2 antvel: Computed apparent RA = 10:13:56.5 Dec = +23:41:52.4 2011-Dec-16 06:07:12 LOG2 antvel: Parameters to Doppler: Topocentric 36432 2011 350 0.0 2011-Dec-16 06:07:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-16 06:07:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2011-Dec-16 06:07:12 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2011-Dec-16 06:07:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-16 06:07:12 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-16 06:07:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-16 06:07:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:07:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2011-Dec-16 06:07:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-16 06:07:12 LOG5 begin_task: Level: (3) ID = <10311> Status = 0 0 0 0 ok 2011-Dec-16 06:07:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-16 06:07:12 LOG5 log_alfabeam: Parameters: 10.220833333333333 23.761388888888888 11.316734 2011.9589459274468 18.999933 2011-Dec-16 06:07:12 LOG4 log_alfabeam: ALFABEAM 0 10.220833333333331 23.761388888888888 2011-Dec-16 06:07:12 LOG4 log_alfabeam: ALFABEAM 1 10.228508079028902 23.748593281343087 2011-Dec-16 06:07:12 LOG4 log_alfabeam: ALFABEAM 2 10.225042379104408 23.834345049577760 2011-Dec-16 06:07:12 LOG4 log_alfabeam: ALFABEAM 3 10.217364628626232 23.847471062206168 2011-Dec-16 06:07:12 LOG4 log_alfabeam: ALFABEAM 4 10.213153864831565 23.773881840669503 2011-Dec-16 06:07:12 LOG4 log_alfabeam: ALFABEAM 5 10.216653181910528 23.687931762393816 2011-Dec-16 06:07:12 LOG4 log_alfabeam: ALFABEAM 6 10.224329520103357 23.675769118544828 2011-Dec-16 06:07:12 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135000023 2011-Dec-16 06:07:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-16 06:07:13 LOG5 begin_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2011-Dec-16 06:07:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 06:07:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-16 06:07:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:07:13 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:07:13 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.166 (still bad) 2011-Dec-16 06:07:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-16 06:07:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36434.00 2011-Dec-16 06:07:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 06:07:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:07:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:07:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 06:07:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:07:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:07:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:07:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 06:07:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 06:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 06:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 06:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.143 (still bad) 2011-Dec-16 06:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 06:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 06:07:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 06:07:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-16 06:07:24 LOG5 end_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2011-Dec-16 06:07:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-16 06:07:24 LOG5 end_task: Level: (3) ID = <10311> Status = 0 0 0 0 ok 2011-Dec-16 06:07:24 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2011-Dec-16 06:07:24 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-16 06:07:24 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2011-Dec-16 06:07:24 LOG5 antvel: Calling 'antvel 101315.000000 234541.000000 J Topocentric 0' 2011-Dec-16 06:07:24 LOG2 antvel: Precessing RA = 10:13:15.0 Dec = +23:45:41.0 Epoch = 2011.95895 J 2011-Dec-16 06:07:24 LOG2 antvel: Computed apparent RA = 10:13:56.5 Dec = +23:41:52.4 2011-Dec-16 06:07:24 LOG2 antvel: Parameters to Doppler: Topocentric 36444 2011 350 0.0 2011-Dec-16 06:07:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-16 06:07:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2011-Dec-16 06:07:24 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2011-Dec-16 06:07:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-16 06:07:24 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-16 06:07:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-16 06:07:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:07:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2011-Dec-16 06:07:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-16 06:07:24 LOG5 begin_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2011-Dec-16 06:07:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-16 06:07:24 LOG5 log_alfabeam: Parameters: 10.220833333333333 23.761388888888888 11.320077 2011.9589463077039 18.999933 2011-Dec-16 06:07:24 LOG4 log_alfabeam: ALFABEAM 0 10.220833333333335 23.761388888888884 2011-Dec-16 06:07:24 LOG4 log_alfabeam: ALFABEAM 1 10.228509135807185 23.748712706004671 2011-Dec-16 06:07:24 LOG4 log_alfabeam: ALFABEAM 2 10.225036332169678 23.834411008678508 2011-Dec-16 06:07:24 LOG4 log_alfabeam: ALFABEAM 3 10.217357492390487 23.847416486478320 2011-Dec-16 06:07:24 LOG4 log_alfabeam: ALFABEAM 4 10.213152849062716 23.773762969148336 2011-Dec-16 06:07:24 LOG4 log_alfabeam: ALFABEAM 5 10.216659195624059 23.687867620746712 2011-Dec-16 06:07:24 LOG4 log_alfabeam: ALFABEAM 6 10.224336518077607 23.675822736218727 2011-Dec-16 06:07:24 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135000024 2011-Dec-16 06:07:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-16 06:07:25 LOG5 begin_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2011-Dec-16 06:07:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 06:07:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-16 06:07:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:07:25 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:07:25 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:07:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-16 06:07:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36446.00 2011-Dec-16 06:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-16 06:07:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 06:07:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:07:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:07:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 06:07:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:07:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:07:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:07:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 06:07:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 06:07:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 06:07:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.135 0.982 1.028 2011-Dec-16 06:07:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.961 1.077 1.113 0.968 2011-Dec-16 06:07:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.878 0.968 0.981 1.139 2011-Dec-16 06:07:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.927 0.014 1.014 0.014 2011-Dec-16 06:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2011-Dec-16 06:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 06:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 06:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 06:07:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 06:07:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-16 06:07:36 LOG5 end_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2011-Dec-16 06:07:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-16 06:07:36 LOG5 end_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2011-Dec-16 06:07:36 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2011-Dec-16 06:07:36 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-16 06:07:36 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2011-Dec-16 06:07:36 LOG5 antvel: Calling 'antvel 101315.000000 234541.000000 J Topocentric 0' 2011-Dec-16 06:07:36 LOG2 antvel: Precessing RA = 10:13:15.0 Dec = +23:45:41.0 Epoch = 2011.95895 J 2011-Dec-16 06:07:36 LOG2 antvel: Computed apparent RA = 10:13:56.5 Dec = +23:41:52.4 2011-Dec-16 06:07:36 LOG2 antvel: Parameters to Doppler: Topocentric 36456 2011 350 0.0 2011-Dec-16 06:07:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-16 06:07:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2011-Dec-16 06:07:36 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2011-Dec-16 06:07:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-16 06:07:36 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-16 06:07:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-16 06:07:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:07:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2011-Dec-16 06:07:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-16 06:07:36 LOG5 begin_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2011-Dec-16 06:07:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-16 06:07:36 LOG5 log_alfabeam: Parameters: 10.220833333333333 23.761388888888888 11.323419 2011.9589466879609 18.999933 2011-Dec-16 06:07:36 LOG4 log_alfabeam: ALFABEAM 0 10.220833333333340 23.761388888888870 2011-Dec-16 06:07:36 LOG4 log_alfabeam: ALFABEAM 1 10.228510177590710 23.748831558202284 2011-Dec-16 06:07:36 LOG4 log_alfabeam: ALFABEAM 2 10.225030309598518 23.834476548708263 2011-Dec-16 06:07:36 LOG4 log_alfabeam: ALFABEAM 3 10.217350395875691 23.847362069372700 2011-Dec-16 06:07:36 LOG4 log_alfabeam: ALFABEAM 4 10.213151847992513 23.773644667921939 2011-Dec-16 06:07:36 LOG4 log_alfabeam: ALFABEAM 5 10.216665184883619 23.687803887151496 2011-Dec-16 06:07:36 LOG4 log_alfabeam: ALFABEAM 6 10.224343477253345 23.675876196921436 2011-Dec-16 06:07:36 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135000025 2011-Dec-16 06:07:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-16 06:07:37 LOG5 begin_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2011-Dec-16 06:07:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 06:07:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-16 06:07:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:07:37 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:07:37 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:07:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-16 06:07:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36458.00 2011-Dec-16 06:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.141 (still bad) 2011-Dec-16 06:07:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 06:07:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:07:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:07:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 06:07:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:07:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:07:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:07:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 06:07:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 06:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-16 06:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-16 06:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-16 06:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-16 06:07:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 06:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-16 06:07:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-16 06:07:48 LOG5 end_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2011-Dec-16 06:07:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-16 06:07:48 LOG5 end_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2011-Dec-16 06:07:48 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2011-Dec-16 06:07:48 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-16 06:07:48 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-16 06:07:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-16 06:07:48 LOG5 begin_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2011-Dec-16 06:07:48 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-16 06:07:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-16 06:07:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-16 06:07:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-16 06:07:48 LOG5 end_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2011-Dec-16 06:07:48 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2011-Dec-16 06:07:48 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2011-Dec-16 06:07:48 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2011-Dec-16 06:07:48 LOG5 antvel: Calling 'antvel 101315.000000 234541.000000 J Topocentric 0' 2011-Dec-16 06:07:48 LOG2 antvel: Precessing RA = 10:13:15.0 Dec = +23:45:41.0 Epoch = 2011.95895 J 2011-Dec-16 06:07:48 LOG2 antvel: Computed apparent RA = 10:13:56.5 Dec = +23:41:52.4 2011-Dec-16 06:07:48 LOG2 antvel: Parameters to Doppler: Topocentric 36468 2011 350 0.0 2011-Dec-16 06:07:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-16 06:07:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2011-Dec-16 06:07:48 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2011-Dec-16 06:07:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-16 06:07:48 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-16 06:07:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-16 06:07:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:07:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2011-Dec-16 06:07:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-16 06:07:48 LOG5 begin_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2011-Dec-16 06:07:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2011-Dec-16 06:07:48 LOG5 log_alfabeam: Parameters: 10.220833333333333 23.761388888888888 11.326762 2011.9589470682181 18.999933 2011-Dec-16 06:07:48 LOG4 log_alfabeam: ALFABEAM 0 10.220833333333333 23.761388888888884 2011-Dec-16 06:07:48 LOG4 log_alfabeam: ALFABEAM 1 10.228511205175497 23.748949913036132 2011-Dec-16 06:07:48 LOG4 log_alfabeam: ALFABEAM 2 10.225024307649722 23.834541712504013 2011-Dec-16 06:07:48 LOG4 log_alfabeam: ALFABEAM 3 10.217343334521390 23.847307777938514 2011-Dec-16 06:07:48 LOG4 log_alfabeam: ALFABEAM 4 10.213150860851952 23.773526862226237 2011-Dec-16 06:07:48 LOG4 log_alfabeam: ALFABEAM 5 10.216671153413500 23.687740519933982 2011-Dec-16 06:07:48 LOG4 log_alfabeam: ALFABEAM 6 10.224350402101289 23.675929533053498 2011-Dec-16 06:07:48 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135000026 2011-Dec-16 06:07:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-16 06:07:49 LOG5 begin_task: Level: (4) ID = <10319> Status = 0 0 0 0 ok 2011-Dec-16 06:07:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 06:07:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-16 06:07:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:07:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:07:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:07:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2011-Dec-16 06:07:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36470.00 2011-Dec-16 06:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2011-Dec-16 06:07:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 06:07:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:07:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:07:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 06:07:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:07:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:07:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:07:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 06:07:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 06:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.562 (still bad) 2011-Dec-16 06:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.558 (still bad) 2011-Dec-16 06:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.559 (still bad) 2011-Dec-16 06:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.558 (still bad) 2011-Dec-16 06:08:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 06:08:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-16 06:08:00 LOG5 end_task: Level: (4) ID = <10319> Status = 0 0 0 0 ok 2011-Dec-16 06:08:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-16 06:08:00 LOG5 end_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2011-Dec-16 06:08:00 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2011-Dec-16 06:08:00 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2011-Dec-16 06:08:00 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2011-Dec-16 06:08:00 LOG5 antvel: Calling 'antvel 101315.000000 234541.000000 J Topocentric 0' 2011-Dec-16 06:08:00 LOG2 antvel: Precessing RA = 10:13:15.0 Dec = +23:45:41.0 Epoch = 2011.95895 J 2011-Dec-16 06:08:00 LOG2 antvel: Computed apparent RA = 10:13:56.5 Dec = +23:41:52.4 2011-Dec-16 06:08:00 LOG2 antvel: Parameters to Doppler: Topocentric 36480 2011 350 0.0 2011-Dec-16 06:08:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-16 06:08:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2011-Dec-16 06:08:00 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2011-Dec-16 06:08:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-16 06:08:00 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-16 06:08:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-16 06:08:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:08:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2011-Dec-16 06:08:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-16 06:08:00 LOG5 begin_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2011-Dec-16 06:08:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2011-Dec-16 06:08:00 LOG5 log_alfabeam: Parameters: 10.220833333333333 23.761388888888888 11.330104 2011.9589474484751 18.999933 2011-Dec-16 06:08:00 LOG4 log_alfabeam: ALFABEAM 0 10.220833333333337 23.761388888888892 2011-Dec-16 06:08:00 LOG4 log_alfabeam: ALFABEAM 1 10.228512218116920 23.749067703635188 2011-Dec-16 06:08:00 LOG4 log_alfabeam: ALFABEAM 2 10.225018329777965 23.834606464653206 2011-Dec-16 06:08:00 LOG4 log_alfabeam: ALFABEAM 3 10.217336312241970 23.847253644266409 2011-Dec-16 06:08:00 LOG4 log_alfabeam: ALFABEAM 4 10.213149888064128 23.773409618610184 2011-Dec-16 06:08:00 LOG4 log_alfabeam: ALFABEAM 5 10.216677097782076 23.687677553512913 2011-Dec-16 06:08:00 LOG4 log_alfabeam: ALFABEAM 6 10.224357288781322 23.675982713117328 2011-Dec-16 06:08:00 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135000027 2011-Dec-16 06:08:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-16 06:08:01 LOG5 begin_task: Level: (4) ID = <10321> Status = 0 0 0 0 ok 2011-Dec-16 06:08:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 06:08:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-16 06:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.559 (still bad) 2011-Dec-16 06:08:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:08:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:08:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:08:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2011-Dec-16 06:08:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36482.00 2011-Dec-16 06:08:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 06:08:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:08:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:08:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 06:08:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:08:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:08:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:08:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 06:08:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 06:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.560 (still bad) 2011-Dec-16 06:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.613 (still bad) 2011-Dec-16 06:08:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.615 (still bad) 2011-Dec-16 06:08:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.618 (still bad) 2011-Dec-16 06:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.613 (still bad) 2011-Dec-16 06:08:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 06:08:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-16 06:08:12 LOG5 end_task: Level: (4) ID = <10321> Status = 0 0 0 0 ok 2011-Dec-16 06:08:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-16 06:08:12 LOG5 end_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2011-Dec-16 06:08:12 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2011-Dec-16 06:08:12 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2011-Dec-16 06:08:12 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2011-Dec-16 06:08:12 LOG5 antvel: Calling 'antvel 101315.000000 234541.000000 J Topocentric 0' 2011-Dec-16 06:08:12 LOG2 antvel: Precessing RA = 10:13:15.0 Dec = +23:45:41.0 Epoch = 2011.95895 J 2011-Dec-16 06:08:12 LOG2 antvel: Computed apparent RA = 10:13:56.5 Dec = +23:41:52.4 2011-Dec-16 06:08:12 LOG2 antvel: Parameters to Doppler: Topocentric 36492 2011 350 0.0 2011-Dec-16 06:08:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-16 06:08:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2011-Dec-16 06:08:12 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2011-Dec-16 06:08:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-16 06:08:12 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-16 06:08:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-16 06:08:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:08:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2011-Dec-16 06:08:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-16 06:08:12 LOG5 begin_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2011-Dec-16 06:08:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2011-Dec-16 06:08:12 LOG5 log_alfabeam: Parameters: 10.220833333333333 23.761388888888888 11.333446 2011.9589478287321 18.999933 2011-Dec-16 06:08:12 LOG4 log_alfabeam: ALFABEAM 0 10.220833333333335 23.761388888888881 2011-Dec-16 06:08:12 LOG4 log_alfabeam: ALFABEAM 1 10.228513216892283 23.749184969383183 2011-Dec-16 06:08:12 LOG4 log_alfabeam: ALFABEAM 2 10.225012374049264 23.834670828238998 2011-Dec-16 06:08:12 LOG4 log_alfabeam: ALFABEAM 3 10.217329326612687 23.847199651699860 2011-Dec-16 06:08:12 LOG4 log_alfabeam: ALFABEAM 4 10.213148929166469 23.773292897861168 2011-Dec-16 06:08:12 LOG4 log_alfabeam: ALFABEAM 5 10.216683019916262 23.687614965424409 2011-Dec-16 06:08:12 LOG4 log_alfabeam: ALFABEAM 6 10.224364139669825 23.676035753504408 2011-Dec-16 06:08:12 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135000028 2011-Dec-16 06:08:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-16 06:08:13 LOG5 begin_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2011-Dec-16 06:08:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 06:08:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-16 06:08:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:08:13 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:08:13 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.616 (still bad) 2011-Dec-16 06:08:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2011-Dec-16 06:08:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36494.00 2011-Dec-16 06:08:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 06:08:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:08:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:08:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 06:08:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:08:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:08:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:08:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 06:08:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 06:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.616 (still bad) 2011-Dec-16 06:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.612 (still bad) 2011-Dec-16 06:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.610 (still bad) 2011-Dec-16 06:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.612 (still bad) 2011-Dec-16 06:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.612 (still bad) 2011-Dec-16 06:08:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 06:08:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-16 06:08:24 LOG5 end_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2011-Dec-16 06:08:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-16 06:08:24 LOG5 end_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2011-Dec-16 06:08:24 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2011-Dec-16 06:08:24 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2011-Dec-16 06:08:24 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2011-Dec-16 06:08:24 LOG5 antvel: Calling 'antvel 101315.000000 234541.000000 J Topocentric 0' 2011-Dec-16 06:08:24 LOG2 antvel: Precessing RA = 10:13:15.0 Dec = +23:45:41.0 Epoch = 2011.95895 J 2011-Dec-16 06:08:24 LOG2 antvel: Computed apparent RA = 10:13:56.5 Dec = +23:41:52.4 2011-Dec-16 06:08:24 LOG2 antvel: Parameters to Doppler: Topocentric 36504 2011 350 0.0 2011-Dec-16 06:08:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-16 06:08:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2011-Dec-16 06:08:24 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2011-Dec-16 06:08:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-16 06:08:24 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-16 06:08:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-16 06:08:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:08:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2011-Dec-16 06:08:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-16 06:08:24 LOG5 begin_task: Level: (3) ID = <10324> Status = 0 0 0 0 ok 2011-Dec-16 06:08:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2011-Dec-16 06:08:24 LOG5 log_alfabeam: Parameters: 10.220833333333333 23.761388888888888 11.336789 2011.9589482089891 18.999933 2011-Dec-16 06:08:24 LOG4 log_alfabeam: ALFABEAM 0 10.220833333333337 23.761388888888892 2011-Dec-16 06:08:24 LOG4 log_alfabeam: ALFABEAM 1 10.228514201959641 23.749301749000601 2011-Dec-16 06:08:24 LOG4 log_alfabeam: ALFABEAM 2 10.225006438556997 23.834734825839657 2011-Dec-16 06:08:24 LOG4 log_alfabeam: ALFABEAM 3 10.217322375255875 23.847145783746438 2011-Dec-16 06:08:24 LOG4 log_alfabeam: ALFABEAM 4 10.213147983715309 23.773176661427545 2011-Dec-16 06:08:24 LOG4 log_alfabeam: ALFABEAM 5 10.216688921715489 23.687552733696581 2011-Dec-16 06:08:24 LOG4 log_alfabeam: ALFABEAM 6 10.224370957097264 23.676088670443253 2011-Dec-16 06:08:24 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135000029 2011-Dec-16 06:08:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-16 06:08:25 LOG5 begin_task: Level: (4) ID = <10325> Status = 0 0 0 0 ok 2011-Dec-16 06:08:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 06:08:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-16 06:08:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:08:25 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:08:25 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:08:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2011-Dec-16 06:08:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36506.00 2011-Dec-16 06:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.611 (still bad) 2011-Dec-16 06:08:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 06:08:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:08:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:08:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 06:08:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:08:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:08:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:08:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 06:08:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 06:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.587 (still bad) 2011-Dec-16 06:08:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 06:08:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.325 1.581 1.331 1.390 2011-Dec-16 06:08:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.348 1.499 1.588 1.339 2011-Dec-16 06:08:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.122 1.364 1.407 1.567 2011-Dec-16 06:08:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.320 0.014 1.443 0.014 2011-Dec-16 06:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.590 (still bad) 2011-Dec-16 06:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.591 (still bad) 2011-Dec-16 06:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.589 (still bad) 2011-Dec-16 06:08:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 06:08:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-16 06:08:36 LOG5 end_task: Level: (4) ID = <10325> Status = 0 0 0 0 ok 2011-Dec-16 06:08:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-16 06:08:36 LOG5 end_task: Level: (3) ID = <10324> Status = 0 0 0 0 ok 2011-Dec-16 06:08:36 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2011-Dec-16 06:08:36 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2011-Dec-16 06:08:36 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2011-Dec-16 06:08:36 LOG5 antvel: Calling 'antvel 101315.000000 234541.000000 J Topocentric 0' 2011-Dec-16 06:08:36 LOG2 antvel: Precessing RA = 10:13:15.0 Dec = +23:45:41.0 Epoch = 2011.95895 J 2011-Dec-16 06:08:36 LOG2 antvel: Computed apparent RA = 10:13:56.5 Dec = +23:41:52.4 2011-Dec-16 06:08:36 LOG2 antvel: Parameters to Doppler: Topocentric 36516 2011 350 0.0 2011-Dec-16 06:08:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-16 06:08:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2011-Dec-16 06:08:36 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2011-Dec-16 06:08:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-16 06:08:36 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-16 06:08:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-16 06:08:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:08:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2011-Dec-16 06:08:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-16 06:08:36 LOG5 begin_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2011-Dec-16 06:08:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2011-Dec-16 06:08:36 LOG5 log_alfabeam: Parameters: 10.220833333333333 23.761388888888888 11.340131 2011.9589485892463 18.999933 2011-Dec-16 06:08:36 LOG4 log_alfabeam: ALFABEAM 0 10.220833333333335 23.761388888888888 2011-Dec-16 06:08:36 LOG4 log_alfabeam: ALFABEAM 1 10.228515172892894 23.749417976454197 2011-Dec-16 06:08:36 LOG4 log_alfabeam: ALFABEAM 2 10.225000526718567 23.834798422620981 2011-Dec-16 06:08:36 LOG4 log_alfabeam: ALFABEAM 3 10.217315462029644 23.847092072229053 2011-Dec-16 06:08:36 LOG4 log_alfabeam: ALFABEAM 4 10.213147052115588 23.773060975024205 2011-Dec-16 06:08:36 LOG4 log_alfabeam: ALFABEAM 5 10.216694799785351 23.687490892186023 2011-Dec-16 06:08:36 LOG4 log_alfabeam: ALFABEAM 6 10.224377737278433 23.676141432699744 2011-Dec-16 06:08:36 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135000030 2011-Dec-16 06:08:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-16 06:08:37 LOG5 begin_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2011-Dec-16 06:08:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 06:08:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-16 06:08:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:08:37 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:08:37 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:08:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2011-Dec-16 06:08:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36518.00 2011-Dec-16 06:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.589 (still bad) 2011-Dec-16 06:08:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 06:08:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:08:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:08:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 06:08:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:08:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:08:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:08:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 06:08:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 06:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.542 (still bad) 2011-Dec-16 06:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.544 (still bad) 2011-Dec-16 06:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.541 (still bad) 2011-Dec-16 06:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.542 (still bad) 2011-Dec-16 06:08:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 06:08:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-16 06:08:48 LOG5 end_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2011-Dec-16 06:08:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-16 06:08:48 LOG5 end_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2011-Dec-16 06:08:48 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2011-Dec-16 06:08:48 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2011-Dec-16 06:08:48 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2011-Dec-16 06:08:48 LOG5 antvel: Calling 'antvel 101315.000000 234541.000000 J Topocentric 0' 2011-Dec-16 06:08:48 LOG2 antvel: Precessing RA = 10:13:15.0 Dec = +23:45:41.0 Epoch = 2011.95895 J 2011-Dec-16 06:08:48 LOG2 antvel: Computed apparent RA = 10:13:56.5 Dec = +23:41:52.4 2011-Dec-16 06:08:48 LOG2 antvel: Parameters to Doppler: Topocentric 36528 2011 350 0.0 2011-Dec-16 06:08:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-16 06:08:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2011-Dec-16 06:08:48 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2011-Dec-16 06:08:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-16 06:08:48 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-16 06:08:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-16 06:08:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:08:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2011-Dec-16 06:08:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-16 06:08:48 LOG5 begin_task: Level: (3) ID = <10328> Status = 0 0 0 0 ok 2011-Dec-16 06:08:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2011-Dec-16 06:08:48 LOG5 log_alfabeam: Parameters: 10.220833333333333 23.761388888888888 11.343474 2011.9589489695034 18.999933 2011-Dec-16 06:08:48 LOG4 log_alfabeam: ALFABEAM 0 10.220833333333337 23.761388888888892 2011-Dec-16 06:08:48 LOG4 log_alfabeam: ALFABEAM 1 10.228516130434198 23.749533725098754 2011-Dec-16 06:08:48 LOG4 log_alfabeam: ALFABEAM 2 10.224994634863240 23.834861660058007 2011-Dec-16 06:08:48 LOG4 log_alfabeam: ALFABEAM 3 10.217308582499170 23.847038484595245 2011-Dec-16 06:08:48 LOG4 log_alfabeam: ALFABEAM 4 10.213146133651231 23.772945765626837 2011-Dec-16 06:08:48 LOG4 log_alfabeam: ALFABEAM 5 10.216700657779157 23.687429400546257 2011-Dec-16 06:08:48 LOG4 log_alfabeam: ALFABEAM 6 10.224384484561385 23.676194072277390 2011-Dec-16 06:08:48 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135000031 2011-Dec-16 06:08:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-16 06:08:49 LOG5 begin_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2011-Dec-16 06:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.542 (still bad) 2011-Dec-16 06:08:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 06:08:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-16 06:08:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:08:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:08:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:08:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2011-Dec-16 06:08:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36530.00 2011-Dec-16 06:08:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 06:08:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:08:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:08:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 06:08:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:08:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:08:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:08:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 06:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.532 (still bad) 2011-Dec-16 06:08:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 06:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.548 (still bad) 2011-Dec-16 06:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.539 (still bad) 2011-Dec-16 06:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.533 (still bad) 2011-Dec-16 06:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.534 (still bad) 2011-Dec-16 06:09:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 06:09:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-16 06:09:00 LOG5 end_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2011-Dec-16 06:09:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-16 06:09:00 LOG5 end_task: Level: (3) ID = <10328> Status = 0 0 0 0 ok 2011-Dec-16 06:09:00 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2011-Dec-16 06:09:00 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2011-Dec-16 06:09:00 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2011-Dec-16 06:09:00 LOG5 antvel: Calling 'antvel 101315.000000 234541.000000 J Topocentric 0' 2011-Dec-16 06:09:00 LOG2 antvel: Precessing RA = 10:13:15.0 Dec = +23:45:41.0 Epoch = 2011.95895 J 2011-Dec-16 06:09:00 LOG2 antvel: Computed apparent RA = 10:13:56.5 Dec = +23:41:52.4 2011-Dec-16 06:09:00 LOG2 antvel: Parameters to Doppler: Topocentric 36540 2011 350 0.0 2011-Dec-16 06:09:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-16 06:09:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2011-Dec-16 06:09:00 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2011-Dec-16 06:09:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-16 06:09:00 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-16 06:09:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-16 06:09:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:09:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2011-Dec-16 06:09:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-16 06:09:00 LOG5 begin_task: Level: (3) ID = <10330> Status = 0 0 0 0 ok 2011-Dec-16 06:09:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2011-Dec-16 06:09:00 LOG5 log_alfabeam: Parameters: 10.220833333333333 23.761388888888888 11.346816 2011.9589493497604 18.999933 2011-Dec-16 06:09:00 LOG4 log_alfabeam: ALFABEAM 0 10.220833333333335 23.761388888888881 2011-Dec-16 06:09:00 LOG4 log_alfabeam: ALFABEAM 1 10.228517074169503 23.749648929449712 2011-Dec-16 06:09:00 LOG4 log_alfabeam: ALFABEAM 2 10.224988766383989 23.834924503694424 2011-Dec-16 06:09:00 LOG4 log_alfabeam: ALFABEAM 3 10.217301740485775 23.846985052491487 2011-Dec-16 06:09:00 LOG4 log_alfabeam: ALFABEAM 4 10.213145228715389 23.772831098404197 2011-Dec-16 06:09:00 LOG4 log_alfabeam: ALFABEAM 5 10.216706492326939 23.687368292266719 2011-Dec-16 06:09:00 LOG4 log_alfabeam: ALFABEAM 6 10.224391195196842 23.676246558115547 2011-Dec-16 06:09:00 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135000032 2011-Dec-16 06:09:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-16 06:09:01 LOG5 begin_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2011-Dec-16 06:09:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 06:09:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-16 06:09:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:09:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:09:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.535 (still bad) 2011-Dec-16 06:09:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2011-Dec-16 06:09:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36542.00 2011-Dec-16 06:09:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 06:09:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:09:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:09:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 06:09:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:09:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:09:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:09:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 06:09:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 06:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.527 (still bad) 2011-Dec-16 06:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.537 (still bad) 2011-Dec-16 06:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.527 (still bad) 2011-Dec-16 06:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.528 (still bad) 2011-Dec-16 06:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.528 (still bad) 2011-Dec-16 06:09:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 06:09:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-16 06:09:12 LOG5 end_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2011-Dec-16 06:09:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-16 06:09:12 LOG5 end_task: Level: (3) ID = <10330> Status = 0 0 0 0 ok 2011-Dec-16 06:09:12 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2011-Dec-16 06:09:12 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2011-Dec-16 06:09:12 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2011-Dec-16 06:09:12 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-16 06:09:12 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-16 06:09:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-16 06:09:12 LOG5 begin_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2011-Dec-16 06:09:12 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-16 06:09:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-16 06:09:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-16 06:09:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-16 06:09:12 LOG5 end_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2011-Dec-16 06:09:12 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2011-Dec-16 06:09:12 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2011-Dec-16 06:09:12 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-16 06:09:12 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2011-Dec-16 06:09:12 LOG5 antvel: Calling 'antvel 101315.000000 234541.000000 J Topocentric 0' 2011-Dec-16 06:09:12 LOG2 antvel: Precessing RA = 10:13:15.0 Dec = +23:45:41.0 Epoch = 2011.95895 J 2011-Dec-16 06:09:12 LOG2 antvel: Computed apparent RA = 10:13:56.5 Dec = +23:41:52.4 2011-Dec-16 06:09:12 LOG2 antvel: Parameters to Doppler: Topocentric 36552 2011 350 0.0 2011-Dec-16 06:09:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-16 06:09:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2011-Dec-16 06:09:12 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2011-Dec-16 06:09:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-16 06:09:12 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-16 06:09:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-16 06:09:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:09:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2011-Dec-16 06:09:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-16 06:09:12 LOG5 begin_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2011-Dec-16 06:09:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-16 06:09:12 LOG5 log_alfabeam: Parameters: 10.220833333333333 23.761388888888888 11.350159 2011.9589497300174 18.999933 2011-Dec-16 06:09:12 LOG4 log_alfabeam: ALFABEAM 0 10.220833333333335 23.761388888888860 2011-Dec-16 06:09:12 LOG4 log_alfabeam: ALFABEAM 1 10.228518004820309 23.749763662182122 2011-Dec-16 06:09:12 LOG4 log_alfabeam: ALFABEAM 2 10.224982917637677 23.834986994478555 2011-Dec-16 06:09:12 LOG4 log_alfabeam: ALFABEAM 3 10.217294931603362 23.846931743524294 2011-Dec-16 06:09:12 LOG4 log_alfabeam: ALFABEAM 4 10.213144336612238 23.772716901009428 2011-Dec-16 06:09:12 LOG4 log_alfabeam: ALFABEAM 5 10.216712307054204 23.687307527514335 2011-Dec-16 06:09:12 LOG4 log_alfabeam: ALFABEAM 6 10.224397873485284 23.676298922059569 2011-Dec-16 06:09:12 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135000033 2011-Dec-16 06:09:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-16 06:09:13 LOG5 begin_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2011-Dec-16 06:09:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 06:09:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-16 06:09:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:09:13 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:09:13 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:09:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-16 06:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.528 (still bad) 2011-Dec-16 06:09:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36554.00 2011-Dec-16 06:09:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 06:09:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:09:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:09:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 06:09:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:09:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:09:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:09:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 06:09:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 06:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.171 (still bad) 2011-Dec-16 06:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.174 (still bad) 2011-Dec-16 06:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.172 (still bad) 2011-Dec-16 06:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.171 (still bad) 2011-Dec-16 06:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.169 (still bad) 2011-Dec-16 06:09:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 06:09:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-16 06:09:24 LOG5 end_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2011-Dec-16 06:09:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-16 06:09:24 LOG5 end_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2011-Dec-16 06:09:24 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2011-Dec-16 06:09:24 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-16 06:09:24 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2011-Dec-16 06:09:24 LOG5 antvel: Calling 'antvel 101315.000000 234541.000000 J Topocentric 0' 2011-Dec-16 06:09:24 LOG2 antvel: Precessing RA = 10:13:15.0 Dec = +23:45:41.0 Epoch = 2011.95895 J 2011-Dec-16 06:09:24 LOG2 antvel: Computed apparent RA = 10:13:56.5 Dec = +23:41:52.4 2011-Dec-16 06:09:24 LOG2 antvel: Parameters to Doppler: Topocentric 36564 2011 350 0.0 2011-Dec-16 06:09:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-16 06:09:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2011-Dec-16 06:09:24 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2011-Dec-16 06:09:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-16 06:09:24 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-16 06:09:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-16 06:09:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:09:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2011-Dec-16 06:09:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-16 06:09:24 LOG5 begin_task: Level: (3) ID = <10335> Status = 0 0 0 0 ok 2011-Dec-16 06:09:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-16 06:09:24 LOG5 log_alfabeam: Parameters: 10.220833333333333 23.761388888888888 11.353501 2011.9589501102744 18.999933 2011-Dec-16 06:09:24 LOG4 log_alfabeam: ALFABEAM 0 10.220833333333335 23.761388888888881 2011-Dec-16 06:09:24 LOG4 log_alfabeam: ALFABEAM 1 10.228518921984389 23.749877858352399 2011-Dec-16 06:09:24 LOG4 log_alfabeam: ALFABEAM 2 10.224977091993130 23.835049098325733 2011-Dec-16 06:09:24 LOG4 log_alfabeam: ALFABEAM 3 10.217288159637009 23.846878589165385 2011-Dec-16 06:09:24 LOG4 log_alfabeam: ALFABEAM 4 10.213143457723390 23.772603238072694 2011-Dec-16 06:09:24 LOG4 log_alfabeam: ALFABEAM 5 10.216718098615109 23.687247139417277 2011-Dec-16 06:09:24 LOG4 log_alfabeam: ALFABEAM 6 10.224404515712811 23.676351133220653 2011-Dec-16 06:09:24 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135000034 2011-Dec-16 06:09:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-16 06:09:25 LOG5 begin_task: Level: (4) ID = <10336> Status = 0 0 0 0 ok 2011-Dec-16 06:09:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 06:09:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-16 06:09:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:09:25 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:09:25 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:09:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-16 06:09:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36566.00 2011-Dec-16 06:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.169 (still bad) 2011-Dec-16 06:09:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 06:09:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:09:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:09:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 06:09:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:09:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:09:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:09:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 06:09:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 06:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.203 (still bad) 2011-Dec-16 06:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.202 (still bad) 2011-Dec-16 06:09:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-16 06:09:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.986 1.201 1.010 1.075 2011-Dec-16 06:09:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.993 1.115 1.203 1.016 2011-Dec-16 06:09:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.932 1.011 1.057 1.198 2011-Dec-16 06:09:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.963 0.014 1.052 0.014 2011-Dec-16 06:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.204 (still bad) 2011-Dec-16 06:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.203 (still bad) 2011-Dec-16 06:09:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 06:09:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-16 06:09:36 LOG5 end_task: Level: (4) ID = <10336> Status = 0 0 0 0 ok 2011-Dec-16 06:09:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-16 06:09:36 LOG5 end_task: Level: (3) ID = <10335> Status = 0 0 0 0 ok 2011-Dec-16 06:09:36 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2011-Dec-16 06:09:36 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-16 06:09:36 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2011-Dec-16 06:09:36 LOG5 antvel: Calling 'antvel 101315.000000 234541.000000 J Topocentric 0' 2011-Dec-16 06:09:36 LOG2 antvel: Precessing RA = 10:13:15.0 Dec = +23:45:41.0 Epoch = 2011.95895 J 2011-Dec-16 06:09:36 LOG2 antvel: Computed apparent RA = 10:13:56.5 Dec = +23:41:52.4 2011-Dec-16 06:09:36 LOG2 antvel: Parameters to Doppler: Topocentric 36576 2011 350 0.0 2011-Dec-16 06:09:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-16 06:09:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2011-Dec-16 06:09:36 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2011-Dec-16 06:09:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-16 06:09:36 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-16 06:09:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-16 06:09:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:09:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2011-Dec-16 06:09:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-16 06:09:36 LOG5 begin_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2011-Dec-16 06:09:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-16 06:09:36 LOG5 log_alfabeam: Parameters: 10.220833333333333 23.761388888888888 11.356844 2011.9589504905316 18.999933 2011-Dec-16 06:09:36 LOG4 log_alfabeam: ALFABEAM 0 10.220833333333331 23.761388888888881 2011-Dec-16 06:09:36 LOG4 log_alfabeam: ALFABEAM 1 10.228519826363135 23.749991589966140 2011-Dec-16 06:09:36 LOG4 log_alfabeam: ALFABEAM 2 10.224971285834513 23.835110855667626 2011-Dec-16 06:09:36 LOG4 log_alfabeam: ALFABEAM 3 10.217281420248506 23.846825557179745 2011-Dec-16 06:09:36 LOG4 log_alfabeam: ALFABEAM 4 10.213142591372787 23.772490037914391 2011-Dec-16 06:09:36 LOG4 log_alfabeam: ALFABEAM 5 10.216723870607687 23.687187088646031 2011-Dec-16 06:09:36 LOG4 log_alfabeam: ALFABEAM 6 10.224411126133148 23.676403223286407 2011-Dec-16 06:09:36 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135000035 2011-Dec-16 06:09:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-16 06:09:37 LOG5 begin_task: Level: (4) ID = <10338> Status = 0 0 0 0 ok 2011-Dec-16 06:09:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 06:09:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-16 06:09:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:09:37 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:09:37 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:09:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-16 06:09:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36578.00 2011-Dec-16 06:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.203 (still bad) 2011-Dec-16 06:09:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 06:09:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:09:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:09:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 06:09:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:09:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:09:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:09:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 06:09:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 06:09:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.199 (still bad) 2011-Dec-16 06:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.203 (still bad) 2011-Dec-16 06:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.200 (still bad) 2011-Dec-16 06:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.200 (still bad) 2011-Dec-16 06:09:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 06:09:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-16 06:09:48 LOG5 end_task: Level: (4) ID = <10338> Status = 0 0 0 0 ok 2011-Dec-16 06:09:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-16 06:09:48 LOG5 end_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2011-Dec-16 06:09:48 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2011-Dec-16 06:09:48 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-16 06:09:48 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2011-Dec-16 06:09:48 LOG5 antvel: Calling 'antvel 101315.000000 234541.000000 J Topocentric 0' 2011-Dec-16 06:09:48 LOG2 antvel: Precessing RA = 10:13:15.0 Dec = +23:45:41.0 Epoch = 2011.95895 J 2011-Dec-16 06:09:48 LOG2 antvel: Computed apparent RA = 10:13:56.5 Dec = +23:41:52.4 2011-Dec-16 06:09:48 LOG2 antvel: Parameters to Doppler: Topocentric 36588 2011 350 0.0 2011-Dec-16 06:09:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-16 06:09:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2011-Dec-16 06:09:48 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2011-Dec-16 06:09:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-16 06:09:48 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-16 06:09:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-16 06:09:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:09:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2011-Dec-16 06:09:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-16 06:09:48 LOG5 begin_task: Level: (3) ID = <10339> Status = 0 0 0 0 ok 2011-Dec-16 06:09:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-16 06:09:48 LOG5 log_alfabeam: Parameters: 10.220833333333333 23.761388888888888 11.360186 2011.9589508707886 18.999933 2011-Dec-16 06:09:48 LOG4 log_alfabeam: ALFABEAM 0 10.220833333333335 23.761388888888870 2011-Dec-16 06:09:48 LOG4 log_alfabeam: ALFABEAM 1 10.228520717565875 23.750104792613193 2011-Dec-16 06:09:48 LOG4 log_alfabeam: ALFABEAM 2 10.224965502506816 23.835172232785290 2011-Dec-16 06:09:48 LOG4 log_alfabeam: ALFABEAM 3 10.217274717187253 23.846772678866099 2011-Dec-16 06:09:48 LOG4 log_alfabeam: ALFABEAM 4 10.213141737930719 23.772377364633638 2011-Dec-16 06:09:48 LOG4 log_alfabeam: ALFABEAM 5 10.216729619709927 23.687127407973346 2011-Dec-16 06:09:48 LOG4 log_alfabeam: ALFABEAM 6 10.224417701067262 23.676455161538186 2011-Dec-16 06:09:48 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135000036 2011-Dec-16 06:09:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-16 06:09:49 LOG5 begin_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2011-Dec-16 06:09:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 06:09:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-16 06:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.201 (still bad) 2011-Dec-16 06:09:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:09:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:09:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:09:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-16 06:09:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36590.00 2011-Dec-16 06:09:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 06:09:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:09:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:09:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 06:09:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:09:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:09:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:09:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 06:09:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 06:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.200 (still bad) 2011-Dec-16 06:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.188 (still bad) 2011-Dec-16 06:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.189 (still bad) 2011-Dec-16 06:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.189 (still bad) 2011-Dec-16 06:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.190 (still bad) 2011-Dec-16 06:10:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 06:10:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-16 06:10:00 LOG5 end_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2011-Dec-16 06:10:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-16 06:10:00 LOG5 end_task: Level: (3) ID = <10339> Status = 0 0 0 0 ok 2011-Dec-16 06:10:00 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2011-Dec-16 06:10:00 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-16 06:10:00 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2011-Dec-16 06:10:00 LOG5 antvel: Calling 'antvel 101315.000000 234541.000000 J Topocentric 0' 2011-Dec-16 06:10:00 LOG2 antvel: Precessing RA = 10:13:15.0 Dec = +23:45:41.0 Epoch = 2011.95895 J 2011-Dec-16 06:10:00 LOG2 antvel: Computed apparent RA = 10:13:56.5 Dec = +23:41:52.4 2011-Dec-16 06:10:00 LOG2 antvel: Parameters to Doppler: Topocentric 36600 2011 350 0.0 2011-Dec-16 06:10:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-16 06:10:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2011-Dec-16 06:10:00 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2011-Dec-16 06:10:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-16 06:10:00 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-16 06:10:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-16 06:10:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:10:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2011-Dec-16 06:10:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-16 06:10:00 LOG5 begin_task: Level: (3) ID = <10341> Status = 0 0 0 0 ok 2011-Dec-16 06:10:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-16 06:10:00 LOG5 log_alfabeam: Parameters: 10.220833333333333 23.761388888888888 11.363529 2011.9589512510456 18.999933 2011-Dec-16 06:10:00 LOG4 log_alfabeam: ALFABEAM 0 10.220833333333337 23.761388888888888 2011-Dec-16 06:10:00 LOG4 log_alfabeam: ALFABEAM 1 10.228521596274366 23.750217537639738 2011-Dec-16 06:10:00 LOG4 log_alfabeam: ALFABEAM 2 10.224959738421166 23.835233269603350 2011-Dec-16 06:10:00 LOG4 log_alfabeam: ALFABEAM 3 10.217268046162083 23.846719922147585 2011-Dec-16 06:10:00 LOG4 log_alfabeam: ALFABEAM 4 10.213140896740397 23.772265147208024 2011-Dec-16 06:10:00 LOG4 log_alfabeam: ALFABEAM 5 10.216735349492714 23.687068058563877 2011-Dec-16 06:10:00 LOG4 log_alfabeam: ALFABEAM 6 10.224424244722904 23.676506979506403 2011-Dec-16 06:10:00 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135000037 2011-Dec-16 06:10:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-16 06:10:01 LOG5 begin_task: Level: (4) ID = <10342> Status = 0 0 0 0 ok 2011-Dec-16 06:10:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 06:10:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-16 06:10:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:10:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:10:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.188 (still bad) 2011-Dec-16 06:10:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-16 06:10:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36602.00 2011-Dec-16 06:10:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 06:10:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:10:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:10:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 06:10:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:10:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:10:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:10:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 06:10:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 06:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.188 (still bad) 2011-Dec-16 06:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.164 (still bad) 2011-Dec-16 06:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.169 (still bad) 2011-Dec-16 06:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.165 (still bad) 2011-Dec-16 06:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.165 (still bad) 2011-Dec-16 06:10:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-16 06:10:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-16 06:10:12 LOG5 end_task: Level: (4) ID = <10342> Status = 0 0 0 0 ok 2011-Dec-16 06:10:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-16 06:10:12 LOG5 end_task: Level: (3) ID = <10341> Status = 0 0 0 0 ok 2011-Dec-16 06:10:12 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2011-Dec-16 06:10:12 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-16 06:10:12 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2011-Dec-16 06:10:12 LOG5 antvel: Calling 'antvel 101315.000000 234541.000000 J Topocentric 0' 2011-Dec-16 06:10:12 LOG2 antvel: Precessing RA = 10:13:15.0 Dec = +23:45:41.0 Epoch = 2011.95895 J 2011-Dec-16 06:10:12 LOG2 antvel: Computed apparent RA = 10:13:56.5 Dec = +23:41:52.4 2011-Dec-16 06:10:12 LOG2 antvel: Parameters to Doppler: Topocentric 36612 2011 350 0.0 2011-Dec-16 06:10:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-16 06:10:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2011-Dec-16 06:10:12 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2011-Dec-16 06:10:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-16 06:10:12 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-16 06:10:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-16 06:10:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:10:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2011-Dec-16 06:10:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-16 06:10:12 LOG5 begin_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2011-Dec-16 06:10:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-16 06:10:12 LOG5 log_alfabeam: Parameters: 10.220833333333333 23.761388888888888 11.366871 2011.9589516313026 18.999933 2011-Dec-16 06:10:12 LOG4 log_alfabeam: ALFABEAM 0 10.220833333333337 23.761388888888874 2011-Dec-16 06:10:12 LOG4 log_alfabeam: ALFABEAM 1 10.228522462109261 23.750329761161634 2011-Dec-16 06:10:12 LOG4 log_alfabeam: ALFABEAM 2 10.224953996898995 23.835293932762738 2011-Dec-16 06:10:12 LOG4 log_alfabeam: ALFABEAM 3 10.217261410887239 23.846667318151393 2011-Dec-16 06:10:12 LOG4 log_alfabeam: ALFABEAM 4 10.213140068161024 23.772153449212965 2011-Dec-16 06:10:12 LOG4 log_alfabeam: ALFABEAM 5 10.216741056657559 23.687009072840475 2011-Dec-16 06:10:12 LOG4 log_alfabeam: ALFABEAM 6 10.224430753455355 23.676558646640839 2011-Dec-16 06:10:12 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 135000038 2011-Dec-16 06:10:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-16 06:10:13 LOG5 begin_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2011-Dec-16 06:10:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-16 06:10:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-16 06:10:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-16 06:10:13 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:10:13 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-16 06:10:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-16 06:10:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36614.00 2011-Dec-16 06:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.165 (still bad) 2011-Dec-16 06:10:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-16 06:10:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:10:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:10:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-16 06:10:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-16 06:10:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:10:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-16 06:10:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-16 06:10:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-16 06:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.161 (still bad) 2011-Dec-16 06:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.170 (still bad) 2011-Dec-16 06:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.164 (still bad) 2011-Dec-16 06:10:22 INFO5 check_wapp_levels