2011-Dec-15 03:30:59 BEGIN executive: CIMA executive starting ... 2011-Dec-15 03:30:59 NOTE executive: STARTING NEW CIMA SESSION 2011-Dec-15 03:30:59 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2011-Dec-15 03:30:59 INFO4 executive: This is an ON-LINE session 2011-Dec-15 03:30:59 INFO4 executive: This is a LOCAL session 2011-Dec-15 03:30:59 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2011-Dec-15 03:30:59 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'JM' 2011-Dec-15 03:30:59 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20111215' 2011-Dec-15 03:30:59 LOG2 log_preferences: Currently applied preferences: 2011-Dec-15 03:30:59 LOG2 log_preferences: prefs(dailylog) = daily 2011-Dec-15 03:30:59 LOG2 log_preferences: prefs(offlinelog) = skip 2011-Dec-15 03:30:59 LOG2 log_preferences: prefs(datawindow) = ignore 2011-Dec-15 03:30:59 LOG2 log_preferences: prefs(limitwarning) = enabled 2011-Dec-15 03:30:59 LOG2 log_preferences: prefs(wappfailure) = abort 2011-Dec-15 03:30:59 LOG2 log_preferences: prefs(helpstyle) = stay-open 2011-Dec-15 03:30:59 LOG2 log_preferences: prefs(logcolours) = full 2011-Dec-15 03:30:59 LOG2 log_preferences: prefs(displaylevel) = INFO3 2011-Dec-15 03:30:59 LOG2 log_preferences: prefs(loglevel) = LOG5 2011-Dec-15 03:30:59 LOG2 log_preferences: prefs(displayformat) = short 2011-Dec-15 03:30:59 LOG2 log_preferences: prefs(logformat) = new 2011-Dec-15 03:30:59 LOG2 log_preferences: prefs(fontsize) = 4 2011-Dec-15 03:30:59 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2011-Dec-15 03:30:59 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2011-Dec-15 03:30:59 ALERT executive: CIMA executive ready 2011-Dec-15 03:31:01 NOTE frontend: CIMA frontend ready 2011-Dec-15 03:31:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:31:01 LOG4 got_cormsg: From DATATAKING: setup 2011-Dec-15 03:31:05 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2011-Dec-15 03:31:05 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2011-Dec-15 03:31:05 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2011-Dec-15 03:31:05 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2011-Dec-15 03:31:05 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Dec-15 03:31:05 NOTE select_receiver: Starting to select receiver ALFA 2011-Dec-15 03:31:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2011-Dec-15 03:31:05 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2011-Dec-15 03:31:06 LOG3 vw_send: To DATATAKING: acvlbical off 2011-Dec-15 03:31:06 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2011-Dec-15 03:31:06 STOP finish_task: Finishing task 'selecting receiver ALFA' 2011-Dec-15 03:31:06 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Dec-15 03:31:06 DONE finish_task: DONE finished selecting: receiver ALFA 2011-Dec-15 03:31:06 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-15 03:31:06 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2011-Dec-15 03:31:06 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Dec-15 03:31:06 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2011-Dec-15 03:31:06 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2011-Dec-15 03:31:06 LOG4 got_cormsg: From DATATAKING: vw% io 2011-Dec-15 03:31:06 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2011-Dec-15 03:31:06 LOG4 got_cormsg: From DATATAKING: 2011-Dec-15 03:31:06 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2011-Dec-15 03:31:06 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2011-Dec-15 03:31:06 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2011-Dec-15 03:31:06 LOG4 got_cormsg: From DATATAKING: vw% connectall 2011-Dec-15 03:31:06 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2011-Dec-15 03:31:06 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2011-Dec-15 03:31:06 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2011-Dec-15 03:31:06 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2011-Dec-15 03:31:06 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2011-Dec-15 03:31:06 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2011-Dec-15 03:31:07 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2011-Dec-15 03:31:07 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2011-Dec-15 03:31:07 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2011-Dec-15 03:31:07 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2011-Dec-15 03:31:07 LOG4 got_cormsg: From DATATAKING: acvlbical off 2011-Dec-15 03:31:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:31:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:31:13 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:31:13 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:32:00 INFO5 CIMA-read_in_command_file: Included command file 'command_galfacurpos_cima31.cmd' (at lines 49 - 65) 2011-Dec-15 03:32:00 INFO4 CIMA-load_command_file: Loaded command file '111215morning.cmd' 2011-Dec-15 03:32:01 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2011-Dec-15 03:32:01 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 499.4804 19.6900 RA/Dec = 07:38:22 +32:41:07 2011-Dec-15 03:32:09 INFO1 CIMA-run_command_file: Transferring command file '111215morning.cmd' to executive ... 2011-Dec-15 03:32:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD ages_mock.conf} 2011-Dec-15 03:32:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2011-Dec-15 03:32:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {CATALOG AGESFull.cat} 2011-Dec-15 03:32:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 9 {IF LSTSLEW(AGES3193_p3_147) < 085040 THEN} 2011-Dec-15 03:32:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 10 {FIXEDDRIFT az=260.45 alfaangle=-65.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_147 ra=95300.00 dec=201400.00} 2011-Dec-15 03:32:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {ENDIF} 2011-Dec-15 03:32:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 16 {IF LSTSLEW(AGES3193_p3_149) < 091410 THEN} 2011-Dec-15 03:32:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 17 {FIXEDDRIFT az=257.65 alfaangle=-60.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_149 ra=95300.00 dec=201100.00} 2011-Dec-15 03:32:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 20 {ENDIF} 2011-Dec-15 03:32:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 23 {IF LSTSLEW(AGES3193_p3_151) < 093740 THEN} 2011-Dec-15 03:32:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 24 {FIXEDDRIFT az=244.88 alfaangle=-43.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_151 ra=95300.00 dec=200800.00} 2011-Dec-15 03:32:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 27 {ENDIF} 2011-Dec-15 03:32:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 30 {IF LSTSLEW(AGES3193_p3_153) < 100340 THEN} 2011-Dec-15 03:32:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 31 {FIXEDDRIFT az=125.67 alfaangle=70.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_153 ra=95300.00 dec=200500.00} 2011-Dec-15 03:32:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 34 {ENDIF} 2011-Dec-15 03:32:10 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 37 {IF LSTSLEW(AGES3193_p3_153) < 102710 THEN} 2011-Dec-15 03:32:10 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 38 {FIXEDDRIFT az=103.27 alfaangle=-83.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_153 ra=95300.00 dec=200500.00} 2011-Dec-15 03:32:10 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 41 {ENDIF} 2011-Dec-15 03:32:10 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 44 {IF LSTSLEW(AGES3193_p3_155) < 105040 THEN} 2011-Dec-15 03:32:10 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 45 {FIXEDDRIFT az=99.17 alfaangle=-76.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_155 ra=95300.00 dec=200200.00} 2011-Dec-15 03:32:10 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 48 {ENDIF} 2011-Dec-15 03:32:10 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 55 {LOAD togs_cima31.conf} 2011-Dec-15 03:32:10 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 56 {TRACKCURPOS} 2011-Dec-15 03:32:10 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 57 {ALFAANGLE 19} 2011-Dec-15 03:32:10 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 61 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2011-Dec-15 03:32:10 COMMAND CIMA-send_to_exec: Sending command to run command file 2011-Dec-15 03:32:10 LOG4 exec_msg: From OBSERVER: run_command_file 111215morning.cmd 1 1 25 2011-Dec-15 03:32:10 LOG4 run_command_file: Calling 'run_command_file 111215morning.cmd 1 1 25' 2011-Dec-15 03:32:10 BEGIN begin_task: Starting task 'running command file '111215morning.cmd'' 2011-Dec-15 03:32:10 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2011-Dec-15 03:32:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '111215morning.cmd' ...} 2011-Dec-15 03:32:10 NOTE run_command_file: Starting execution of command file '111215morning.cmd' from line 1 2011-Dec-15 03:32:10 COMMAND run_command_line: EXECUTING command 4: 'LOAD ages_mock.conf' 2011-Dec-15 03:32:10 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2011-Dec-15 03:32:10 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-15 03:32:10 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2011-Dec-15 03:32:10 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock.conf' 2011-Dec-15 03:32:10 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2011-Dec-15 03:32:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2011-Dec-15 03:32:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2011-Dec-15 03:32:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2011-Dec-15 03:32:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled1) "1" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled2) "0" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards1) "both" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards2) "both" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode1) "spectra" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode2) "spectra" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg1) "2-pol" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg2) "2-pol" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits1) "32" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits2) "32" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor1) "1" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor2) "1" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset1) "0.0" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset2) "0.0" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags1) "8192" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags2) "8192" 2011-Dec-15 03:32:12 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs1) "1000.0" 2011-Dec-15 03:32:13 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs2) "1000.0" 2011-Dec-15 03:32:13 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad1) "1" 2011-Dec-15 03:32:13 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad2) "0" 2011-Dec-15 03:32:13 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors1) "13" 2011-Dec-15 03:32:13 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors2) "0" 2011-Dec-15 03:32:13 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors1) "0" 2011-Dec-15 03:32:13 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors2) "0" 2011-Dec-15 03:32:13 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors1) "0" 2011-Dec-15 03:32:13 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors2) "0" 2011-Dec-15 03:32:13 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors1) "0" 2011-Dec-15 03:32:13 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors2) "0" 2011-Dec-15 03:32:13 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype1) "fits" 2011-Dec-15 03:32:13 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype2) "fits" 2011-Dec-15 03:32:13 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2011-Dec-15 03:32:13 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2011-Dec-15 03:32:13 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2011-Dec-15 03:32:13 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2011-Dec-15 03:32:13 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2011-Dec-15 03:32:13 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2011-Dec-15 03:32:13 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2011-Dec-15 03:32:13 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2011-Dec-15 03:32:13 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2011-Dec-15 03:32:13 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-15 03:32:13 BEGIN begin_task: Starting task 'configuring IF/LO path' 2011-Dec-15 03:32:13 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Dec-15 03:32:13 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2011-Dec-15 03:32:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2011-Dec-15 03:32:13 INFO1 config_iflo: Selecting receiver ALFA 2011-Dec-15 03:32:13 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2011-Dec-15 03:32:13 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2011-Dec-15 03:32:13 START begin_task: Starting task 'selecting receiver ALFA' 2011-Dec-15 03:32:13 LOG5 begin_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Dec-15 03:32:13 NOTE select_receiver: Starting to select receiver ALFA 2011-Dec-15 03:32:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2011-Dec-15 03:32:13 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2011-Dec-15 03:32:13 LOG3 vw_send: To DATATAKING: acvlbical off 2011-Dec-15 03:32:13 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2011-Dec-15 03:32:13 STOP finish_task: Finishing task 'selecting receiver ALFA' 2011-Dec-15 03:32:13 LOG5 finish_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Dec-15 03:32:13 INFO2 finish_task: DONE finished selecting: receiver ALFA 2011-Dec-15 03:32:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 03:32:13 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2011-Dec-15 03:32:13 LOG5 end_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Dec-15 03:32:13 START begin_task: Starting task 'waiting for receiver ALFA' 2011-Dec-15 03:32:13 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2011-Dec-15 03:32:13 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2011-Dec-15 03:32:13 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2011-Dec-15 03:32:13 INFO1 config_iflo: Configuring rest of the IF/LO path 2011-Dec-15 03:32:13 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2011-Dec-15 03:32:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-15 03:32:13 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-15 03:32:13 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-15 03:32:13 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2011-Dec-15 03:32:13 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-15 03:32:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-15 03:32:13 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2011-Dec-15 03:32:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-15 03:32:13 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-15 03:32:13 LOG3 vw_send: To DATATAKING: alfafb 1 2011-Dec-15 03:32:13 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2011-Dec-15 03:32:13 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2011-Dec-15 03:32:13 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2011-Dec-15 03:32:13 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2011-Dec-15 03:32:13 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2011-Dec-15 03:32:13 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2011-Dec-15 03:32:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2011-Dec-15 03:32:13 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2011-Dec-15 03:32:14 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2011-Dec-15 03:32:14 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2011-Dec-15 03:32:14 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2011-Dec-15 03:32:14 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2011-Dec-15 03:32:14 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2011-Dec-15 03:32:14 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2011-Dec-15 03:32:14 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2011-Dec-15 03:32:14 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2011-Dec-15 03:32:14 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2011-Dec-15 03:32:14 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2011-Dec-15 03:32:14 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2011-Dec-15 03:32:14 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2011-Dec-15 03:32:14 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2011-Dec-15 03:32:14 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2011-Dec-15 03:32:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 03:32:14 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2011-Dec-15 03:32:14 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2011-Dec-15 03:32:14 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2011-Dec-15 03:32:14 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2011-Dec-15 03:32:14 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2011-Dec-15 03:32:14 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2011-Dec-15 03:32:14 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 03:32:14 START begin_task: Starting task 'waiting on configuring IF/LO path' 2011-Dec-15 03:32:14 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2011-Dec-15 03:32:14 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2011-Dec-15 03:32:14 LOG4 got_cormsg: From DATATAKING: acvlbical off 2011-Dec-15 03:32:14 LOG4 got_cormsg: From DATATAKING: alfafb 1 2011-Dec-15 03:32:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2011-Dec-15 03:32:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2011-Dec-15 03:32:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2011-Dec-15 03:32:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2011-Dec-15 03:32:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2011-Dec-15 03:32:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2011-Dec-15 03:32:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2011-Dec-15 03:32:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2011-Dec-15 03:32:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2011-Dec-15 03:32:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2011-Dec-15 03:32:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2011-Dec-15 03:32:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2011-Dec-15 03:32:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2011-Dec-15 03:32:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2011-Dec-15 03:32:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 03:32:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2011-Dec-15 03:32:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2011-Dec-15 03:32:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2011-Dec-15 03:32:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2011-Dec-15 03:32:14 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 03:32:20 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:32:20 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:32:21 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:32:21 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:32:21 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:32:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:32:26 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:32:26 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:32:27 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:32:27 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:32:27 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:32:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:32:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:32:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:32:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:32:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:32:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:32:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:32:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:32:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:32:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:32:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:32:29 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-15 03:32:29 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2011-Dec-15 03:32:29 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2011-Dec-15 03:32:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2011-Dec-15 03:32:29 STOP finish_task: Finishing task 'configuring IF/LO path' 2011-Dec-15 03:32:29 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Dec-15 03:32:29 DONE finish_task: DONE finished configuration: IF/LO path 2011-Dec-15 03:32:29 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-15 03:32:29 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2011-Dec-15 03:32:29 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Dec-15 03:32:29 BEGIN begin_task: Starting task 'configuring WAPPs' 2011-Dec-15 03:32:29 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2011-Dec-15 03:32:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2011-Dec-15 03:32:29 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2011-Dec-15 03:32:29 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Dec-15 03:32:29 START begin_task: Starting task 'selecting calibration port' 2011-Dec-15 03:32:29 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2011-Dec-15 03:32:30 LOG3 vw_send: To DATATAKING: calport 3 2011-Dec-15 03:32:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Dec-15 03:32:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 03:32:30 START begin_task: Starting task 'waiting on calport' 2011-Dec-15 03:32:30 LOG5 begin_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2011-Dec-15 03:32:30 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:32:30 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Dec-15 03:32:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 03:32:30 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:32:30 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-15 03:32:30 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Dec-15 03:32:30 LOG5 end_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2011-Dec-15 03:32:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Dec-15 03:32:30 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Dec-15 03:32:30 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2011-Dec-15 03:32:30 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-15 03:32:30 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-15 03:32:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-15 03:32:30 LOG5 begin_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2011-Dec-15 03:32:30 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-15 03:32:30 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:32:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-15 03:32:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-15 03:32:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-15 03:32:30 LOG5 end_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2011-Dec-15 03:32:30 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2011-Dec-15 03:32:30 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2011-Dec-15 03:32:30 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2011-Dec-15 03:32:30 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2011-Dec-15 03:32:30 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2011-Dec-15 03:32:30 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2011-Dec-15 03:32:30 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2011-Dec-15 03:32:30 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2011-Dec-15 03:32:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2011-Dec-15 03:32:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2011-Dec-15 03:32:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2011-Dec-15 03:32:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2011-Dec-15 03:32:30 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Dec-15 03:32:30 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Dec-15 03:32:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-15 03:32:30 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2011-Dec-15 03:32:30 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-15 03:32:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-15 03:32:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-15 03:32:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-15 03:32:30 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2011-Dec-15 03:32:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2011-Dec-15 03:32:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2011-Dec-15 03:32:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2011-Dec-15 03:32:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2011-Dec-15 03:32:30 STOP finish_task: Finishing task 'configuring WAPPs' 2011-Dec-15 03:32:30 LOG5 finish_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2011-Dec-15 03:32:30 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2011-Dec-15 03:32:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-15 03:32:31 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2011-Dec-15 03:32:31 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2011-Dec-15 03:32:31 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2011-Dec-15 03:32:31 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2011-Dec-15 03:32:31 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2011-Dec-15 03:32:31 INFO1 config_mock: Starting to configure the Mock spectrometer 2011-Dec-15 03:32:31 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Dec-15 03:32:31 START begin_task: Starting task 'selecting calibration port' 2011-Dec-15 03:32:31 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2011-Dec-15 03:32:31 LOG3 vw_send: To DATATAKING: calport 3 2011-Dec-15 03:32:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Dec-15 03:32:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 03:32:31 START begin_task: Starting task 'waiting on calport' 2011-Dec-15 03:32:31 LOG5 begin_task: Level: (4) ID = <10015> Status = 0 0 0 0 ok 2011-Dec-15 03:32:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2011-Dec-15 03:32:31 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.69) to the zenith angle limit 19.69 degrees! 2011-Dec-15 03:32:31 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Dec-15 03:32:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2011-Dec-15 03:32:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2011-Dec-15 03:32:31 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 499.4804 19.6900 RA/Dec = 07:38:52 +32:41:08 2011-Dec-15 03:32:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 03:32:31 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:32:31 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-15 03:32:31 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Dec-15 03:32:31 LOG5 end_task: Level: (4) ID = <10015> Status = 0 0 0 0 ok 2011-Dec-15 03:32:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Dec-15 03:32:31 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Dec-15 03:32:31 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2011-Dec-15 03:32:31 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-15 03:32:31 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-15 03:32:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-15 03:32:31 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2011-Dec-15 03:32:31 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:32:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2011-Dec-15 03:32:31 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-15 03:32:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-15 03:32:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-15 03:32:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-15 03:32:31 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2011-Dec-15 03:32:31 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Dec-15 03:32:31 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Dec-15 03:32:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-15 03:32:31 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2011-Dec-15 03:32:31 NOTE WAPPDATA-new_file: New FITS file: wapp.20111215.a2048.0000.fits 2011-Dec-15 03:32:31 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20111215.a2048.0000.fits} 2011-Dec-15 03:32:31 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-15 03:32:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-15 03:32:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-15 03:32:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-15 03:32:31 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2011-Dec-15 03:32:31 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2011-Dec-15 03:32:31 LOG3 socket_wait: To MOCK: NOP 2011-Dec-15 03:32:31 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2011-Dec-15 03:32:31 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2011-Dec-15 03:32:32 ALERT got_mock_message: Mock spectrometer restarting 2011-Dec-15 03:32:32 LOG4 from_mock: From MOCK: nop ok 2011-Dec-15 03:32:32 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2011-Dec-15 03:32:32 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2011-Dec-15 03:32:32 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2011-Dec-15 03:32:32 LOG2 config_mock: Mock spectrometer configuration group 1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2011-Dec-15 03:32:32 LOG2 config_mock: Mock spectrometer configuration group 1 (0): datatype=AB 2011-Dec-15 03:32:32 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bits=32 2011-Dec-15 03:32:32 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bwmhz=172.032 2011-Dec-15 03:32:32 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevif1hz=250000000 2011-Dec-15 03:32:32 LOG2 config_mock: Mock spectrometer configuration group 1 (0): digfreqoffhz=0.0 2011-Dec-15 03:32:32 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fftlen=8192 2011-Dec-15 03:32:32 LOG2 config_mock: Mock spectrometer configuration group 1 (0): dumptmsec=1.0 2011-Dec-15 03:32:32 LOG2 config_mock: Mock spectrometer configuration group 1 (0): blankatod=1 2011-Dec-15 03:32:32 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskadc=13 2011-Dec-15 03:32:32 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskpfb=0 2011-Dec-15 03:32:32 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskacc=0 2011-Dec-15 03:32:32 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskash=0 2011-Dec-15 03:32:32 LOG2 config_mock: Mock spectrometer configuration group 1 (0): adcclkhz=172032000 2011-Dec-15 03:32:32 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevlohz=175000000 325000000 2011-Dec-15 03:32:32 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fileprefix=a2048 2011-Dec-15 03:32:32 LOG2 config_mock: Mock spectrometer configuration group 1 (0): maxfilesizemb=2048 2011-Dec-15 03:32:32 LOG2 config_mock: Mock spectrometer configuration group 1 (0): calctl=c0 2011-Dec-15 03:32:32 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group 1' using string 'conf' 2011-Dec-15 03:32:32 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bits=32:bwmhz=172.032:pdevif1hz=250000000:digfreqoffhz=0.0:fftlen=8192:dumptmsec=1.0:blankatod=1:emaskadc=13:emaskpfb=0:emaskacc=0:emaskash=0:adcclkhz=172032000:pdevlohz=175000000 325000000:fileprefix=a2048:maxfilesizemb=2048:calctl=c0 2011-Dec-15 03:32:32 START begin_task: Starting task 'waiting on configure Mock spectrometer group 1' 2011-Dec-15 03:32:32 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2011-Dec-15 03:32:32 LOG4 from_mock: From MOCK: confok 2011-Dec-15 03:32:32 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group 1' with status 'OK' 2011-Dec-15 03:32:32 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2011-Dec-15 03:32:32 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group 1' 2011-Dec-15 03:32:32 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group 2' using string 'conf' 2011-Dec-15 03:32:32 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2011-Dec-15 03:32:32 START begin_task: Starting task 'waiting on disable Mock spectrometer group 2' 2011-Dec-15 03:32:32 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2011-Dec-15 03:32:32 LOG4 from_mock: From MOCK: confok 2011-Dec-15 03:32:32 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group 2' with status 'OK' 2011-Dec-15 03:32:32 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2011-Dec-15 03:32:32 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group 2' 2011-Dec-15 03:32:32 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2011-Dec-15 03:32:32 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2011-Dec-15 03:32:32 DONE finish_task: DONE finished configuring: the Mock spectrometer 2011-Dec-15 03:32:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-15 03:32:32 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2011-Dec-15 03:32:32 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2011-Dec-15 03:32:32 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2011-Dec-15 03:32:32 COMMAND run_command_line: EXECUTING command 5: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2011-Dec-15 03:32:32 COMMAND run_command_line: EXECUTING command 6: 'CATALOG AGESFull.cat' 2011-Dec-15 03:32:33 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2011-Dec-15 03:32:33 COMMAND run_command_line: EXECUTING command 9: 'IF LSTSLEW(AGES3193_p3_147) < 085040 THEN' 2011-Dec-15 03:32:33 LOG3 is_if_valid: Current source data: up 621.0 17.5 UP - - 156 5.1 2011-Dec-15 03:32:33 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_147) < 085040 2011-Dec-15 03:32:33 INFO5 is_if_valid: Condition parsed as: 8.7511890000000001 < 8.844444444444445 2011-Dec-15 03:32:33 COMMAND run_command_line: EXECUTING command 10: 'FIXEDDRIFT az=260.45 alfaangle=-65.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_147 ra=95300.00 dec=201400.00' 2011-Dec-15 03:32:33 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-15 03:32:34 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-15 03:32:34 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 260.45 -65.8 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_147 95300.00 201400.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-15 03:32:34 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-15 03:32:34 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2011-Dec-15 03:32:34 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'Cur-pos' 2011-Dec-15 03:32:34 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-15 03:32:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_147} 2011-Dec-15 03:32:34 INFO3 fixed_driftmap: Sending telescope to Az = 260.45 and ZA = 14.96 2011-Dec-15 03:32:34 LOG3 track_source: Calling 'track_source AGES3193_p3_147 260.45 14.9576290613 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-15 03:32:34 START begin_task: Starting task 'sending tracking commands' 2011-Dec-15 03:32:34 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2011-Dec-15 03:32:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_147} INFO {Slewing to source 'AGES3193_p3_147' ...} 2011-Dec-15 03:32:34 INFO1 track_source: Starting to track AGES3193_p3_147 2011-Dec-15 03:32:34 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_147" 2011-Dec-15 03:32:34 LOG3 vw_send: To DATATAKING: set ra 260.45 2011-Dec-15 03:32:34 LOG3 vw_send: To DATATAKING: set dec 14.9576290613 2011-Dec-15 03:32:34 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-15 03:32:34 LOG3 vw_send: To DATATAKING: pnt tr 260.45 14.9576290613 -CF 2011-Dec-15 03:32:34 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 03:32:34 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-15 03:32:34 LOG5 finish_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2011-Dec-15 03:32:34 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-15 03:32:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 03:32:34 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-15 03:32:34 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2011-Dec-15 03:32:34 START begin_task: Starting task 'rotate ALFA to -65.8 degrees' 2011-Dec-15 03:32:34 LOG5 begin_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2011-Dec-15 03:32:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -65.8 degrees ...} 2011-Dec-15 03:32:34 INFO2 rotate_alfa: ALFA commanded to -65.8 degrees 2011-Dec-15 03:32:34 LOG3 sock_errsend: To ALFAMOTOR: POSITION -65.8 REPLY 2011-Dec-15 03:32:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-15 03:32:34 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-15 03:32:34 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2011-Dec-15 03:32:34 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_147" 2011-Dec-15 03:32:34 LOG4 got_cormsg: From DATATAKING: set ra 260.45 2011-Dec-15 03:32:34 LOG4 got_cormsg: From DATATAKING: set dec 14.9576290613 2011-Dec-15 03:32:34 LOG4 got_cormsg: From DATATAKING: vw% 260.45 2011-Dec-15 03:32:34 LOG4 got_cormsg: From DATATAKING: vw% 14.9576290613 2011-Dec-15 03:32:34 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:32:34 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-15 03:32:34 LOG4 got_cormsg: From DATATAKING: pnt tr 260.45 14.9576290613 -CF 2011-Dec-15 03:32:34 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 03:32:34 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-15 03:32:34 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:32:35 COMMAND CIMA-send_to_exec: Sending command to abort observation 2011-Dec-15 03:32:35 LOG4 exec_msg: From OBSERVER: abort_task abort 2011-Dec-15 03:32:35 WARNING abort_task: WARNING abort requested! 2011-Dec-15 03:32:36 WARNING abort_task: WARNING Aborting wait for waiting on ALFA rotation 2011-Dec-15 03:32:36 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'ABORT' 2011-Dec-15 03:32:36 LOG5 end_task: Level: (4) ID = <10024> Status = 1 0 0 0 abort 2011-Dec-15 03:32:36 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-15 03:32:36 ALERT rotate_alfa: Current ALFA angle is +18.97 degrees! 2011-Dec-15 03:32:36 STOP finish_task: Finishing task 'rotate ALFA to -65.8 degrees' 2011-Dec-15 03:32:36 LOG5 finish_task: Level: (3) ID = <10023> Status = 1 0 0 0 abort 2011-Dec-15 03:32:36 WARNING finish_task: WARNING aborted configuration: rotating ALFA to -65.8 degrees 2011-Dec-15 03:32:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Aborted 2011-Dec-15 03:32:36 STOP end_task: Finishing task 'rotate ALFA to -65.8 degrees' with status 'ABORT' 2011-Dec-15 03:32:36 LOG5 end_task: Level: (3) ID = <10023> Status = 1 0 0 0 abort 2011-Dec-15 03:32:36 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-15 03:32:36 LOG5 finish_task: Level: (2) ID = <10021> Status = 1 0 0 0 abort 2011-Dec-15 03:32:36 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2011-Dec-15 03:32:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2011-Dec-15 03:32:36 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2011-Dec-15 03:32:36 LOG5 end_task: Level: (2) ID = <10021> Status = 1 0 0 0 abort 2011-Dec-15 03:32:36 ALERT run_command_file: Stopping command file processing at line 10! 2011-Dec-15 03:32:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2011-Dec-15 03:32:36 STOP finish_task: Finishing task 'running command file '111215morning.cmd'' 2011-Dec-15 03:32:36 LOG5 finish_task: Level: (1) ID = <10002> Status = 1 0 0 0 abort 2011-Dec-15 03:32:36 WARNING finish_task: WARNING aborted running: command file '111215morning.cmd' 2011-Dec-15 03:32:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2011-Dec-15 03:32:36 END end_task: Finishing task 'running command file '111215morning.cmd'' with status 'ABORT' 2011-Dec-15 03:32:36 LOG5 end_task: Level: (1) ID = <10002> Status = 1 0 0 0 abort 2011-Dec-15 03:32:39 ALERT CIMA-exit_cima: Exiting CIMA ... 2011-Dec-15 03:32:39 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2011-Dec-15 03:32:39 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2011-Dec-15 03:32:39 LOG3 vw_send: To DATATAKING: mvdata a2048 2011-Dec-15 03:32:39 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2011-Dec-15 03:32:39 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2011-Dec-15 03:32:39 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2011-Dec-15 03:32:39 NOTE CIMA-exit_cima: Cleaning up session ... 2011-Dec-15 03:32:39 LOG4 got_cormsg: From DATATAKING: mvdata a2048 2011-Dec-15 03:32:39 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2011-Dec-15 03:32:39 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:32:39 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:35:21 BEGIN executive: CIMA executive starting ... 2011-Dec-15 03:35:21 NOTE executive: STARTING NEW CIMA SESSION 2011-Dec-15 03:35:21 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2011-Dec-15 03:35:21 INFO4 executive: This is an ON-LINE session 2011-Dec-15 03:35:21 INFO4 executive: This is a LOCAL session 2011-Dec-15 03:35:21 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2011-Dec-15 03:35:21 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'JM' 2011-Dec-15 03:35:21 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20111215' 2011-Dec-15 03:35:22 LOG2 log_preferences: Currently applied preferences: 2011-Dec-15 03:35:22 LOG2 log_preferences: prefs(dailylog) = daily 2011-Dec-15 03:35:22 LOG2 log_preferences: prefs(offlinelog) = skip 2011-Dec-15 03:35:22 LOG2 log_preferences: prefs(datawindow) = ignore 2011-Dec-15 03:35:22 LOG2 log_preferences: prefs(limitwarning) = enabled 2011-Dec-15 03:35:22 LOG2 log_preferences: prefs(wappfailure) = abort 2011-Dec-15 03:35:22 LOG2 log_preferences: prefs(helpstyle) = stay-open 2011-Dec-15 03:35:22 LOG2 log_preferences: prefs(logcolours) = full 2011-Dec-15 03:35:22 LOG2 log_preferences: prefs(displaylevel) = INFO3 2011-Dec-15 03:35:22 LOG2 log_preferences: prefs(loglevel) = LOG5 2011-Dec-15 03:35:22 LOG2 log_preferences: prefs(displayformat) = short 2011-Dec-15 03:35:22 LOG2 log_preferences: prefs(logformat) = new 2011-Dec-15 03:35:22 LOG2 log_preferences: prefs(fontsize) = 4 2011-Dec-15 03:35:22 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2011-Dec-15 03:35:22 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2011-Dec-15 03:35:22 ALERT executive: CIMA executive ready 2011-Dec-15 03:35:23 NOTE frontend: CIMA frontend ready 2011-Dec-15 03:35:24 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:35:24 LOG4 got_cormsg: From DATATAKING: setup 2011-Dec-15 03:35:26 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2011-Dec-15 03:35:26 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2011-Dec-15 03:35:26 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2011-Dec-15 03:35:26 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2011-Dec-15 03:35:26 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Dec-15 03:35:26 NOTE select_receiver: Starting to select receiver ALFA 2011-Dec-15 03:35:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2011-Dec-15 03:35:26 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2011-Dec-15 03:35:26 LOG3 vw_send: To DATATAKING: acvlbical off 2011-Dec-15 03:35:26 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2011-Dec-15 03:35:26 STOP finish_task: Finishing task 'selecting receiver ALFA' 2011-Dec-15 03:35:26 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Dec-15 03:35:26 DONE finish_task: DONE finished selecting: receiver ALFA 2011-Dec-15 03:35:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-15 03:35:26 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2011-Dec-15 03:35:26 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Dec-15 03:35:28 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2011-Dec-15 03:35:28 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2011-Dec-15 03:35:28 LOG4 got_cormsg: From DATATAKING: vw% io 2011-Dec-15 03:35:28 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2011-Dec-15 03:35:29 LOG4 got_cormsg: From DATATAKING: 2011-Dec-15 03:35:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:35:29 LOG4 got_cormsg: From DATATAKING: tape stat 2011-Dec-15 03:35:29 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2011-Dec-15 03:35:29 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2011-Dec-15 03:35:29 LOG4 got_cormsg: From DATATAKING: vw% connectall 2011-Dec-15 03:35:29 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2011-Dec-15 03:35:29 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2011-Dec-15 03:35:29 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2011-Dec-15 03:35:29 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2011-Dec-15 03:35:29 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2011-Dec-15 03:35:29 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2011-Dec-15 03:35:29 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2011-Dec-15 03:35:29 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2011-Dec-15 03:35:29 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2011-Dec-15 03:35:29 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2011-Dec-15 03:35:29 LOG4 got_cormsg: From DATATAKING: acvlbical off 2011-Dec-15 03:35:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:35:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:35:36 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:35:36 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:35:56 INFO5 CIMA-read_in_command_file: Included command file 'command_galfacurpos_cima31.cmd' (at lines 49 - 65) 2011-Dec-15 03:35:56 INFO4 CIMA-load_command_file: Loaded command file '111215morning.cmd' 2011-Dec-15 03:35:59 INFO1 CIMA-run_command_file: Transferring command file '111215morning.cmd' to executive ... 2011-Dec-15 03:35:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD ages_mock.conf} 2011-Dec-15 03:35:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2011-Dec-15 03:35:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {CATALOG AGESFull.cat} 2011-Dec-15 03:35:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 9 {IF LSTSLEW(AGES3193_p3_147) < 085040 THEN} 2011-Dec-15 03:35:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 10 {FIXEDDRIFT az=260.45 alfaangle=-65.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_147 ra=95300.00 dec=201400.00} 2011-Dec-15 03:35:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {ENDIF} 2011-Dec-15 03:35:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 16 {IF LSTSLEW(AGES3193_p3_149) < 091410 THEN} 2011-Dec-15 03:35:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 17 {FIXEDDRIFT az=257.65 alfaangle=-60.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_149 ra=95300.00 dec=201100.00} 2011-Dec-15 03:36:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 20 {ENDIF} 2011-Dec-15 03:36:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 23 {IF LSTSLEW(AGES3193_p3_151) < 093740 THEN} 2011-Dec-15 03:36:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 24 {FIXEDDRIFT az=244.88 alfaangle=-43.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_151 ra=95300.00 dec=200800.00} 2011-Dec-15 03:36:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 27 {ENDIF} 2011-Dec-15 03:36:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 30 {IF LSTSLEW(AGES3193_p3_153) < 100340 THEN} 2011-Dec-15 03:36:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 31 {FIXEDDRIFT az=125.67 alfaangle=70.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_153 ra=95300.00 dec=200500.00} 2011-Dec-15 03:36:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 34 {ENDIF} 2011-Dec-15 03:36:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 37 {IF LSTSLEW(AGES3193_p3_153) < 102710 THEN} 2011-Dec-15 03:36:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 38 {FIXEDDRIFT az=103.27 alfaangle=-83.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_153 ra=95300.00 dec=200500.00} 2011-Dec-15 03:36:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 41 {ENDIF} 2011-Dec-15 03:36:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 44 {IF LSTSLEW(AGES3193_p3_155) < 105040 THEN} 2011-Dec-15 03:36:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 45 {FIXEDDRIFT az=99.17 alfaangle=-76.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_155 ra=95300.00 dec=200200.00} 2011-Dec-15 03:36:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 48 {ENDIF} 2011-Dec-15 03:36:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 55 {LOAD togs_cima31.conf} 2011-Dec-15 03:36:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 56 {TRACKCURPOS} 2011-Dec-15 03:36:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 57 {ALFAANGLE 19} 2011-Dec-15 03:36:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 61 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2011-Dec-15 03:36:00 COMMAND CIMA-send_to_exec: Sending command to run command file 2011-Dec-15 03:36:00 LOG4 exec_msg: From OBSERVER: run_command_file 111215morning.cmd 1 1 25 2011-Dec-15 03:36:00 LOG4 run_command_file: Calling 'run_command_file 111215morning.cmd 1 1 25' 2011-Dec-15 03:36:00 BEGIN begin_task: Starting task 'running command file '111215morning.cmd'' 2011-Dec-15 03:36:00 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2011-Dec-15 03:36:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '111215morning.cmd' ...} 2011-Dec-15 03:36:00 NOTE run_command_file: Starting execution of command file '111215morning.cmd' from line 1 2011-Dec-15 03:36:00 COMMAND run_command_line: EXECUTING command 4: 'LOAD ages_mock.conf' 2011-Dec-15 03:36:00 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2011-Dec-15 03:36:00 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-15 03:36:00 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2011-Dec-15 03:36:00 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock.conf' 2011-Dec-15 03:36:00 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2011-Dec-15 03:36:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled1) "1" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled2) "0" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards1) "both" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards2) "both" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode1) "spectra" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode2) "spectra" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg1) "2-pol" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg2) "2-pol" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits1) "32" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits2) "32" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor1) "1" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor2) "1" 2011-Dec-15 03:36:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset1) "0.0" 2011-Dec-15 03:36:03 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset2) "0.0" 2011-Dec-15 03:36:03 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags1) "8192" 2011-Dec-15 03:36:03 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags2) "8192" 2011-Dec-15 03:36:03 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs1) "1000.0" 2011-Dec-15 03:36:03 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs2) "1000.0" 2011-Dec-15 03:36:03 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad1) "1" 2011-Dec-15 03:36:03 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad2) "0" 2011-Dec-15 03:36:03 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors1) "13" 2011-Dec-15 03:36:03 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors2) "0" 2011-Dec-15 03:36:03 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors1) "0" 2011-Dec-15 03:36:03 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors2) "0" 2011-Dec-15 03:36:03 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors1) "0" 2011-Dec-15 03:36:03 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors2) "0" 2011-Dec-15 03:36:03 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors1) "0" 2011-Dec-15 03:36:03 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors2) "0" 2011-Dec-15 03:36:03 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype1) "fits" 2011-Dec-15 03:36:03 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype2) "fits" 2011-Dec-15 03:36:03 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2011-Dec-15 03:36:03 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2011-Dec-15 03:36:03 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2011-Dec-15 03:36:03 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2011-Dec-15 03:36:03 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2011-Dec-15 03:36:03 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2011-Dec-15 03:36:03 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2011-Dec-15 03:36:03 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2011-Dec-15 03:36:03 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2011-Dec-15 03:36:03 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-15 03:36:03 BEGIN begin_task: Starting task 'configuring IF/LO path' 2011-Dec-15 03:36:03 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Dec-15 03:36:03 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2011-Dec-15 03:36:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2011-Dec-15 03:36:03 INFO1 config_iflo: Selecting receiver ALFA 2011-Dec-15 03:36:03 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2011-Dec-15 03:36:03 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2011-Dec-15 03:36:03 START begin_task: Starting task 'selecting receiver ALFA' 2011-Dec-15 03:36:03 LOG5 begin_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Dec-15 03:36:03 NOTE select_receiver: Starting to select receiver ALFA 2011-Dec-15 03:36:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2011-Dec-15 03:36:03 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2011-Dec-15 03:36:03 LOG3 vw_send: To DATATAKING: acvlbical off 2011-Dec-15 03:36:03 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2011-Dec-15 03:36:03 STOP finish_task: Finishing task 'selecting receiver ALFA' 2011-Dec-15 03:36:03 LOG5 finish_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Dec-15 03:36:03 INFO2 finish_task: DONE finished selecting: receiver ALFA 2011-Dec-15 03:36:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 03:36:03 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2011-Dec-15 03:36:03 LOG5 end_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Dec-15 03:36:03 START begin_task: Starting task 'waiting for receiver ALFA' 2011-Dec-15 03:36:03 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2011-Dec-15 03:36:03 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2011-Dec-15 03:36:03 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2011-Dec-15 03:36:03 INFO1 config_iflo: Configuring rest of the IF/LO path 2011-Dec-15 03:36:03 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2011-Dec-15 03:36:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-15 03:36:03 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-15 03:36:03 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-15 03:36:03 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2011-Dec-15 03:36:03 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-15 03:36:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-15 03:36:03 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2011-Dec-15 03:36:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-15 03:36:04 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-15 03:36:04 LOG3 vw_send: To DATATAKING: alfafb 1 2011-Dec-15 03:36:04 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2011-Dec-15 03:36:04 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2011-Dec-15 03:36:04 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2011-Dec-15 03:36:04 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2011-Dec-15 03:36:04 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2011-Dec-15 03:36:04 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2011-Dec-15 03:36:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2011-Dec-15 03:36:04 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2011-Dec-15 03:36:04 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2011-Dec-15 03:36:04 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2011-Dec-15 03:36:04 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2011-Dec-15 03:36:04 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2011-Dec-15 03:36:04 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2011-Dec-15 03:36:04 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2011-Dec-15 03:36:04 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2011-Dec-15 03:36:04 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2011-Dec-15 03:36:04 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2011-Dec-15 03:36:04 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2011-Dec-15 03:36:04 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2011-Dec-15 03:36:04 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2011-Dec-15 03:36:04 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2011-Dec-15 03:36:04 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2011-Dec-15 03:36:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 03:36:04 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2011-Dec-15 03:36:04 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2011-Dec-15 03:36:04 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2011-Dec-15 03:36:04 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2011-Dec-15 03:36:04 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2011-Dec-15 03:36:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2011-Dec-15 03:36:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 03:36:04 START begin_task: Starting task 'waiting on configuring IF/LO path' 2011-Dec-15 03:36:04 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2011-Dec-15 03:36:04 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2011-Dec-15 03:36:04 LOG4 got_cormsg: From DATATAKING: acvlbical off 2011-Dec-15 03:36:04 LOG4 got_cormsg: From DATATAKING: alfafb 1 2011-Dec-15 03:36:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2011-Dec-15 03:36:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2011-Dec-15 03:36:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2011-Dec-15 03:36:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2011-Dec-15 03:36:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2011-Dec-15 03:36:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2011-Dec-15 03:36:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2011-Dec-15 03:36:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2011-Dec-15 03:36:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2011-Dec-15 03:36:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2011-Dec-15 03:36:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2011-Dec-15 03:36:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2011-Dec-15 03:36:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2011-Dec-15 03:36:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2011-Dec-15 03:36:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 03:36:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2011-Dec-15 03:36:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2011-Dec-15 03:36:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2011-Dec-15 03:36:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2011-Dec-15 03:36:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 03:36:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:36:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:36:11 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:36:11 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:36:11 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:36:12 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:36:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:36:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:36:17 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:36:17 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:36:17 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:36:18 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:36:18 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:36:18 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:36:18 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:36:18 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:36:18 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:36:19 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:36:19 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:36:19 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:36:19 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:36:19 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:36:19 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-15 03:36:19 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2011-Dec-15 03:36:19 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2011-Dec-15 03:36:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2011-Dec-15 03:36:19 STOP finish_task: Finishing task 'configuring IF/LO path' 2011-Dec-15 03:36:19 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Dec-15 03:36:19 DONE finish_task: DONE finished configuration: IF/LO path 2011-Dec-15 03:36:19 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-15 03:36:19 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2011-Dec-15 03:36:19 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Dec-15 03:36:19 BEGIN begin_task: Starting task 'configuring WAPPs' 2011-Dec-15 03:36:19 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2011-Dec-15 03:36:19 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2011-Dec-15 03:36:19 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2011-Dec-15 03:36:20 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Dec-15 03:36:20 START begin_task: Starting task 'selecting calibration port' 2011-Dec-15 03:36:20 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2011-Dec-15 03:36:20 LOG3 vw_send: To DATATAKING: calport 3 2011-Dec-15 03:36:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Dec-15 03:36:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 03:36:20 START begin_task: Starting task 'waiting on calport' 2011-Dec-15 03:36:20 LOG5 begin_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2011-Dec-15 03:36:20 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:36:20 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Dec-15 03:36:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 03:36:20 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:36:20 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-15 03:36:20 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Dec-15 03:36:20 LOG5 end_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2011-Dec-15 03:36:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Dec-15 03:36:20 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Dec-15 03:36:20 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2011-Dec-15 03:36:20 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-15 03:36:20 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-15 03:36:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-15 03:36:20 LOG5 begin_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2011-Dec-15 03:36:20 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-15 03:36:20 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:36:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-15 03:36:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-15 03:36:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-15 03:36:20 LOG5 end_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2011-Dec-15 03:36:20 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2011-Dec-15 03:36:20 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2011-Dec-15 03:36:20 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2011-Dec-15 03:36:20 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2011-Dec-15 03:36:20 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2011-Dec-15 03:36:20 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2011-Dec-15 03:36:20 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2011-Dec-15 03:36:20 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2011-Dec-15 03:36:20 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2011-Dec-15 03:36:20 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2011-Dec-15 03:36:20 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2011-Dec-15 03:36:20 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2011-Dec-15 03:36:20 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Dec-15 03:36:20 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Dec-15 03:36:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-15 03:36:20 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2011-Dec-15 03:36:20 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-15 03:36:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-15 03:36:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-15 03:36:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-15 03:36:20 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2011-Dec-15 03:36:20 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2011-Dec-15 03:36:20 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2011-Dec-15 03:36:20 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2011-Dec-15 03:36:20 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2011-Dec-15 03:36:20 STOP finish_task: Finishing task 'configuring WAPPs' 2011-Dec-15 03:36:20 LOG5 finish_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2011-Dec-15 03:36:20 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2011-Dec-15 03:36:21 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-15 03:36:21 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2011-Dec-15 03:36:21 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2011-Dec-15 03:36:21 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2011-Dec-15 03:36:21 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2011-Dec-15 03:36:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2011-Dec-15 03:36:21 INFO1 config_mock: Starting to configure the Mock spectrometer 2011-Dec-15 03:36:21 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Dec-15 03:36:21 START begin_task: Starting task 'selecting calibration port' 2011-Dec-15 03:36:21 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2011-Dec-15 03:36:21 LOG3 vw_send: To DATATAKING: calport 3 2011-Dec-15 03:36:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Dec-15 03:36:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 03:36:21 START begin_task: Starting task 'waiting on calport' 2011-Dec-15 03:36:21 LOG5 begin_task: Level: (4) ID = <10015> Status = 0 0 0 0 ok 2011-Dec-15 03:36:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2011-Dec-15 03:36:21 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Dec-15 03:36:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2011-Dec-15 03:36:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2011-Dec-15 03:36:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 03:36:21 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:36:21 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-15 03:36:21 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Dec-15 03:36:21 LOG5 end_task: Level: (4) ID = <10015> Status = 0 0 0 0 ok 2011-Dec-15 03:36:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Dec-15 03:36:21 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Dec-15 03:36:21 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2011-Dec-15 03:36:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-15 03:36:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-15 03:36:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-15 03:36:21 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2011-Dec-15 03:36:21 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:36:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2011-Dec-15 03:36:21 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-15 03:36:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-15 03:36:21 NOTE WAPPDATA-new_file: New FITS file: wapp.20111215.a2048.0001.fits 2011-Dec-15 03:36:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-15 03:36:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-15 03:36:21 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2011-Dec-15 03:36:21 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Dec-15 03:36:21 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Dec-15 03:36:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-15 03:36:21 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2011-Dec-15 03:36:21 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20111215.a2048.0001.fits} 2011-Dec-15 03:36:21 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-15 03:36:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-15 03:36:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-15 03:36:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-15 03:36:21 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2011-Dec-15 03:36:21 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2011-Dec-15 03:36:21 LOG3 socket_wait: To MOCK: NOP 2011-Dec-15 03:36:21 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2011-Dec-15 03:36:21 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2011-Dec-15 03:36:22 ALERT got_mock_message: Mock spectrometer restarting 2011-Dec-15 03:36:22 LOG4 from_mock: From MOCK: nop ok 2011-Dec-15 03:36:22 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2011-Dec-15 03:36:22 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2011-Dec-15 03:36:22 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2011-Dec-15 03:36:22 LOG2 config_mock: Mock spectrometer configuration group 1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2011-Dec-15 03:36:22 LOG2 config_mock: Mock spectrometer configuration group 1 (0): datatype=AB 2011-Dec-15 03:36:22 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bits=32 2011-Dec-15 03:36:22 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bwmhz=172.032 2011-Dec-15 03:36:22 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevif1hz=250000000 2011-Dec-15 03:36:22 LOG2 config_mock: Mock spectrometer configuration group 1 (0): digfreqoffhz=0.0 2011-Dec-15 03:36:22 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fftlen=8192 2011-Dec-15 03:36:22 LOG2 config_mock: Mock spectrometer configuration group 1 (0): dumptmsec=1.0 2011-Dec-15 03:36:22 LOG2 config_mock: Mock spectrometer configuration group 1 (0): blankatod=1 2011-Dec-15 03:36:22 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskadc=13 2011-Dec-15 03:36:22 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskpfb=0 2011-Dec-15 03:36:22 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskacc=0 2011-Dec-15 03:36:22 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskash=0 2011-Dec-15 03:36:22 LOG2 config_mock: Mock spectrometer configuration group 1 (0): adcclkhz=172032000 2011-Dec-15 03:36:22 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevlohz=175000000 325000000 2011-Dec-15 03:36:22 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fileprefix=a2048 2011-Dec-15 03:36:22 LOG2 config_mock: Mock spectrometer configuration group 1 (0): maxfilesizemb=2048 2011-Dec-15 03:36:22 LOG2 config_mock: Mock spectrometer configuration group 1 (0): calctl=c0 2011-Dec-15 03:36:22 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group 1' using string 'conf' 2011-Dec-15 03:36:22 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bits=32:bwmhz=172.032:pdevif1hz=250000000:digfreqoffhz=0.0:fftlen=8192:dumptmsec=1.0:blankatod=1:emaskadc=13:emaskpfb=0:emaskacc=0:emaskash=0:adcclkhz=172032000:pdevlohz=175000000 325000000:fileprefix=a2048:maxfilesizemb=2048:calctl=c0 2011-Dec-15 03:36:22 START begin_task: Starting task 'waiting on configure Mock spectrometer group 1' 2011-Dec-15 03:36:22 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2011-Dec-15 03:36:22 LOG4 from_mock: From MOCK: confok 2011-Dec-15 03:36:22 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group 1' with status 'OK' 2011-Dec-15 03:36:22 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2011-Dec-15 03:36:22 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group 1' 2011-Dec-15 03:36:22 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group 2' using string 'conf' 2011-Dec-15 03:36:22 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2011-Dec-15 03:36:22 START begin_task: Starting task 'waiting on disable Mock spectrometer group 2' 2011-Dec-15 03:36:22 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2011-Dec-15 03:36:22 LOG4 from_mock: From MOCK: confok 2011-Dec-15 03:36:22 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group 2' with status 'OK' 2011-Dec-15 03:36:22 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2011-Dec-15 03:36:22 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group 2' 2011-Dec-15 03:36:22 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2011-Dec-15 03:36:22 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2011-Dec-15 03:36:22 DONE finish_task: DONE finished configuring: the Mock spectrometer 2011-Dec-15 03:36:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-15 03:36:22 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2011-Dec-15 03:36:22 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2011-Dec-15 03:36:22 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2011-Dec-15 03:36:22 COMMAND run_command_line: EXECUTING command 5: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2011-Dec-15 03:36:22 COMMAND run_command_line: EXECUTING command 6: 'CATALOG AGESFull.cat' 2011-Dec-15 03:36:22 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2011-Dec-15 03:36:23 COMMAND run_command_line: EXECUTING command 9: 'IF LSTSLEW(AGES3193_p3_147) < 085040 THEN' 2011-Dec-15 03:36:23 LOG3 is_if_valid: Current source data: up 620.8 16.6 UP - - 153 2.1 2011-Dec-15 03:36:23 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_147) < 085040 2011-Dec-15 03:36:23 INFO5 is_if_valid: Condition parsed as: 8.7652529999999995 < 8.844444444444445 2011-Dec-15 03:36:23 COMMAND run_command_line: EXECUTING command 10: 'FIXEDDRIFT az=260.45 alfaangle=-65.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_147 ra=95300.00 dec=201400.00' 2011-Dec-15 03:36:23 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-15 03:36:24 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-15 03:36:24 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 260.45 -65.8 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_147 95300.00 201400.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-15 03:36:24 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-15 03:36:24 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2011-Dec-15 03:36:24 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_147' 2011-Dec-15 03:36:24 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-15 03:36:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_147} 2011-Dec-15 03:36:24 INFO3 fixed_driftmap: Sending telescope to Az = 260.45 and ZA = 14.96 2011-Dec-15 03:36:24 LOG3 track_source: Calling 'track_source AGES3193_p3_147 260.45 14.9576279407 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-15 03:36:24 START begin_task: Starting task 'sending tracking commands' 2011-Dec-15 03:36:24 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2011-Dec-15 03:36:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_147} INFO {Slewing to source 'AGES3193_p3_147' ...} 2011-Dec-15 03:36:24 INFO1 track_source: Starting to track AGES3193_p3_147 2011-Dec-15 03:36:24 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_147" 2011-Dec-15 03:36:24 LOG3 vw_send: To DATATAKING: set ra 260.45 2011-Dec-15 03:36:24 LOG3 vw_send: To DATATAKING: set dec 14.9576279407 2011-Dec-15 03:36:24 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-15 03:36:24 LOG3 vw_send: To DATATAKING: pnt tr 260.45 14.9576279407 -CF 2011-Dec-15 03:36:24 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 03:36:24 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-15 03:36:24 LOG5 finish_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2011-Dec-15 03:36:24 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-15 03:36:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 03:36:24 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-15 03:36:24 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2011-Dec-15 03:36:24 START begin_task: Starting task 'rotate ALFA to -65.8 degrees' 2011-Dec-15 03:36:24 LOG5 begin_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2011-Dec-15 03:36:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -65.8 degrees ...} 2011-Dec-15 03:36:24 INFO2 rotate_alfa: ALFA commanded to -65.8 degrees 2011-Dec-15 03:36:24 LOG3 sock_errsend: To ALFAMOTOR: POSITION -65.8 REPLY 2011-Dec-15 03:36:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-15 03:36:24 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-15 03:36:24 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2011-Dec-15 03:36:24 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_147" 2011-Dec-15 03:36:24 LOG4 got_cormsg: From DATATAKING: set ra 260.45 2011-Dec-15 03:36:24 LOG4 got_cormsg: From DATATAKING: set dec 14.9576279407 2011-Dec-15 03:36:24 LOG4 got_cormsg: From DATATAKING: vw% 260.45 2011-Dec-15 03:36:24 LOG4 got_cormsg: From DATATAKING: vw% 14.9576279407 2011-Dec-15 03:36:24 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:36:24 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-15 03:36:24 LOG4 got_cormsg: From DATATAKING: pnt tr 260.45 14.9576279407 -CF 2011-Dec-15 03:36:24 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 03:36:24 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-15 03:36:24 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:36:25 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-15 03:36:25 INFO3 alfa_motor: ALFA rotator in-position -65.80 degrees 2011-Dec-15 03:36:25 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-15 03:36:25 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2011-Dec-15 03:36:25 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-15 03:36:25 STOP finish_task: Finishing task 'rotate ALFA to -65.8 degrees' 2011-Dec-15 03:36:25 LOG5 finish_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2011-Dec-15 03:36:25 INFO2 finish_task: DONE finished configuration: rotating ALFA to -65.8 degrees 2011-Dec-15 03:36:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 03:36:25 STOP end_task: Finishing task 'rotate ALFA to -65.8 degrees' with status 'OK' 2011-Dec-15 03:36:25 LOG5 end_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2011-Dec-15 03:36:25 START begin_task: Starting task 'waiting on telescope' 2011-Dec-15 03:36:25 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2011-Dec-15 03:36:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-15 03:36:25 LOG3 waittrk: Start waittrk 5 2011-Dec-15 03:36:25 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-15 03:36:25 LOG5 begin_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2011-Dec-15 03:36:30 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-15 03:36:30 LOG5 end_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2011-Dec-15 03:36:30 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-15 03:36:30 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2011-Dec-15 03:38:41 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-15 03:38:41 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2011-Dec-15 03:38:41 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-15 03:38:41 INFO2 waittrk: Now tracking AGES3193_p3_147 2011-Dec-15 03:38:41 LOG4 waittrk: Current telescope position: Az = 620.02 ZA = 14.96 2011-Dec-15 03:38:41 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-15 03:38:41 LOG5 finish_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2011-Dec-15 03:38:41 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-15 03:38:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 03:38:41 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-15 03:38:41 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2011-Dec-15 03:38:41 START begin_task: Starting task 'selecting calibration type' 2011-Dec-15 03:38:41 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2011-Dec-15 03:38:41 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-15 03:38:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-15 03:38:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 03:38:42 START begin_task: Starting task 'waiting on setcal' 2011-Dec-15 03:38:42 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2011-Dec-15 03:38:42 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-15 03:38:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 03:38:42 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:38:42 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-15 03:38:42 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-15 03:38:42 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2011-Dec-15 03:38:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-15 03:38:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-15 03:38:42 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-15 03:38:42 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-15 03:38:42 LOG5 begin_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2011-Dec-15 03:38:42 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:38:43 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-15 03:38:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-15 03:38:43 LOG5 end_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2011-Dec-15 03:38:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-15 03:38:43 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-15 03:38:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-15 03:38:43 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-15 03:38:43 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-15 03:38:43 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2011-Dec-15 03:38:43 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-15 03:38:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-15 03:38:43 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2011-Dec-15 03:38:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-15 03:38:43 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-15 03:38:43 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-15 03:38:43 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2011-Dec-15 03:38:43 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Dec-15 03:38:43 INFO2 astwait: Waiting for 214 seconds from 07:38:43 to 07:42:17 UTC ... 2011-Dec-15 03:38:43 LOG4 send_obs_status: To obs_status: <1> TASKTIME 214 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-15 03:38:43 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Dec-15 03:38:43 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2011-Dec-15 03:42:17 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Dec-15 03:42:17 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2011-Dec-15 03:42:17 INFO3 astwait: Finished waiting 2011-Dec-15 03:42:17 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-15 03:42:17 LOG5 dopset_later: Calling 'dopset_later 61.463846720219379' 2011-Dec-15 03:42:17 INFO3 dopset_later: Setting Doppler correction for 03:43:17 (61.5 seconds from now) 2011-Dec-15 03:42:17 LOG5 antvel: Calling 'antvel 260.450000 14.957628 F Heliocentric 61.463846720219379' 2011-Dec-15 03:42:17 LOG2 antvel: Transforming current Az = 260.45 ZA = 14.96 to apparent RA = 09:53:41.4 Dec = +20:10:23.3 2011-Dec-15 03:42:17 LOG2 antvel: Parameters to Doppler: Heliocentric 27797 2011 349 0.0 2011-Dec-15 03:42:17 INFO5 antvel: Computed antenna velocity: -26.21714 km/s 2011-Dec-15 03:42:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-26.217138337800002 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-15 03:42:17 INFO4 dopset_gen: New sky frequencies: 1381.364230 1381.364230 1381.364230 1381.364230 1381.364230 1381.364230 1381.364230 1381.364230 1381.364230 2011-Dec-15 03:42:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.364230 sky0=1381.364230 sky1=1381.364230 sky2=1381.364230 sky3=1381.364230 sky4=1381.364230 sky5=1381.364230 sky6=1381.364230 sky7=1381.364230 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-15 03:42:17 LOG2 dopset_gen: Result from 'sky2syn': 1631.364230 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-15 03:42:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631364230.0} 2011-Dec-15 03:42:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 03:42:17 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-15 03:42:17 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-15 03:42:17 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.0 Dec = +20:13:46.7 2011-Dec-15 03:42:17 LOG3 track_source: Calling 'track_source AGES3193_p3_147 095203.0 201346.7 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-15 03:42:17 START begin_task: Starting task 'sending tracking commands' 2011-Dec-15 03:42:17 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2011-Dec-15 03:42:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_147} INFO {Slewing to source 'AGES3193_p3_147' ...} 2011-Dec-15 03:42:17 INFO1 track_source: Starting to track AGES3193_p3_147 2011-Dec-15 03:42:17 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_147" 2011-Dec-15 03:42:17 LOG3 vw_send: To DATATAKING: set ra 095203.0 2011-Dec-15 03:42:17 LOG3 vw_send: To DATATAKING: set dec 201346.7 2011-Dec-15 03:42:17 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-15 03:42:17 LOG3 vw_send: To DATATAKING: pnt tr 095203.0 201346.7 -CJ 2011-Dec-15 03:42:17 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 03:42:17 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-15 03:42:17 LOG5 finish_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2011-Dec-15 03:42:17 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-15 03:42:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 03:42:17 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-15 03:42:17 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2011-Dec-15 03:42:17 START begin_task: Starting task 'waiting on telescope' 2011-Dec-15 03:42:17 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2011-Dec-15 03:42:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-15 03:42:17 LOG3 waittrk: Start waittrk 5 2011-Dec-15 03:42:17 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-15 03:42:17 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2011-Dec-15 03:42:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631364230.0} 2011-Dec-15 03:42:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 03:42:17 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_147" 2011-Dec-15 03:42:17 LOG4 got_cormsg: From DATATAKING: set ra 095203.0 2011-Dec-15 03:42:17 LOG4 got_cormsg: From DATATAKING: set dec 201346.7 2011-Dec-15 03:42:17 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-15 03:42:17 LOG4 got_cormsg: From DATATAKING: vw% 095203.0 2011-Dec-15 03:42:17 LOG4 got_cormsg: From DATATAKING: vw% 201346.7 2011-Dec-15 03:42:17 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:42:17 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-15 03:42:17 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.0 201346.7 -CJ 2011-Dec-15 03:42:17 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 03:42:17 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-15 03:42:17 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:42:22 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-15 03:42:22 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2011-Dec-15 03:42:22 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-15 03:42:22 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2011-Dec-15 03:42:24 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-15 03:42:24 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2011-Dec-15 03:42:24 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-15 03:42:24 INFO2 waittrk: Now tracking AGES3193_p3_147 2011-Dec-15 03:42:24 LOG4 waittrk: Current telescope position: Az = 620.04 ZA = 14.95 2011-Dec-15 03:42:24 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-15 03:42:24 LOG5 finish_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2011-Dec-15 03:42:24 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-15 03:42:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 03:42:24 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-15 03:42:24 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2011-Dec-15 03:42:24 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-15 03:42:24 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2011-Dec-15 03:42:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-15 03:42:24 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-15 03:42:24 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-15 03:42:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-15 03:42:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 03:42:24 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-15 03:42:24 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2011-Dec-15 03:42:25 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-15 03:42:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 03:42:26 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:42:26 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-15 03:42:26 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-15 03:42:26 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2011-Dec-15 03:42:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-15 03:42:26 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-15 03:42:26 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2011-Dec-15 03:42:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-15 03:42:26 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-15 03:42:26 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-15 03:42:26 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-15 03:42:26 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-15 03:42:26 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-15 03:42:26 LOG5 begin_task: Level: (5) ID = <10040> Status = 0 0 0 0 ok 2011-Dec-15 03:42:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-15 03:42:26 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:42:27 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 8 6 dB 2011-Dec-15 03:42:27 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 3 4 dB 2011-Dec-15 03:42:27 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 3 dB 2011-Dec-15 03:42:27 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2011-Dec-15 03:42:27 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-15 03:42:27 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-15 03:42:27 LOG5 end_task: Level: (5) ID = <10040> Status = 0 0 0 0 ok 2011-Dec-15 03:42:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.935 1.111 ALFA beam 1: 0.949 0.952 2011-Dec-15 03:42:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.944 1.051 ALFA beam 3: 1.093 0.924 2011-Dec-15 03:42:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.848 0.928 ALFA beam 5: 1.022 0.906 2011-Dec-15 03:42:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.950 0.014 ALFA beam 7: 1.034 0.014 2011-Dec-15 03:42:27 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-15 03:42:27 LOG5 finish_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2011-Dec-15 03:42:27 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-15 03:42:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 03:42:27 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-15 03:42:27 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2011-Dec-15 03:42:27 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-15 03:42:27 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2011-Dec-15 03:42:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-15 03:42:27 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-15 03:42:27 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-15 03:42:27 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-15 03:42:27 LOG5 begin_task: Level: (5) ID = <10042> Status = 0 0 0 0 ok 2011-Dec-15 03:42:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-15 03:42:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 1.111 0.949 0.952 2011-Dec-15 03:42:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 1.051 1.093 0.924 2011-Dec-15 03:42:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.848 0.928 1.022 0.906 2011-Dec-15 03:42:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.014 1.034 0.014 2011-Dec-15 03:42:33 INFO3 from_mock: From MOCK: b0s0g0 rms:A 32.4 28.5 B 30.7 30.8 mn:A 0.2 0.1 B -0.2 -0.3 gn: 11 11 2011-Dec-15 03:42:33 INFO3 from_mock: From MOCK: b0s1g0 rms:A 31.1 29.7 B 29.1 30.8 mn:A 0.1 -0.4 B -0.4 0.2 gn: 11 11 2011-Dec-15 03:42:33 INFO3 from_mock: From MOCK: b1s0g0 rms:A 31.2 29.2 B 33.3 29.2 mn:A 0.5 0.6 B 0.1 -0.2 gn: 7 11 2011-Dec-15 03:42:33 INFO3 from_mock: From MOCK: b1s1g0 rms:A 31.5 29.0 B 29.3 29.3 mn:A -0.4 -0.3 B 0.4 0.1 gn: 8 9 2011-Dec-15 03:42:33 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.1 28.2 B 28.9 30.2 mn:A 0.1 -0.2 B 0.3 0.0 gn: 10 11 2011-Dec-15 03:42:33 INFO3 from_mock: From MOCK: b2s1g0 rms:A 31.0 31.2 B 30.3 28.2 mn:A 0.1 -0.3 B 0.0 0.2 gn: 11 11 2011-Dec-15 03:42:33 INFO3 from_mock: From MOCK: b3s0g0 rms:A 29.4 29.2 B 31.6 28.1 mn:A 0.4 -0.3 B 0.0 -0.3 gn: 12 12 2011-Dec-15 03:42:33 INFO3 from_mock: From MOCK: b3s1g0 rms:A 31.6 30.9 B 30.4 31.7 mn:A -0.2 0.3 B 0.1 0.2 gn: 12 12 2011-Dec-15 03:42:33 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.6 29.6 B 28.7 28.8 mn:A -0.3 -0.4 B -0.4 -0.1 gn: 13 11 2011-Dec-15 03:42:33 INFO3 from_mock: From MOCK: b4s1g0 rms:A 30.4 27.5 B 31.4 30.3 mn:A -0.1 -0.1 B -0.5 0.1 gn: 15 13 2011-Dec-15 03:42:33 INFO3 from_mock: From MOCK: b5s0g0 rms:A 30.4 29.2 B 28.5 28.5 mn:A 0.4 0.3 B 0.0 0.5 gn: 12 10 2011-Dec-15 03:42:33 INFO3 from_mock: From MOCK: b5s1g0 rms:A 29.6 29.4 B 29.3 29.0 mn:A -0.3 0.2 B -0.1 0.2 gn: 11 10 2011-Dec-15 03:42:33 INFO3 from_mock: From MOCK: b6s0g0 rms:A 30.2 27.7 B 14.1 14.5 mn:A -0.6 0.3 B 0.3 -0.4 gn: 12 31 2011-Dec-15 03:42:33 INFO3 from_mock: From MOCK: b6s1g0 rms:A 33.1 30.1 B 11.1 10.8 mn:A 0.7 0.5 B 0.1 0.2 gn: 13 31 2011-Dec-15 03:42:33 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-15 03:42:33 LOG5 end_task: Level: (5) ID = <10042> Status = 0 0 0 0 ok 2011-Dec-15 03:42:33 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-15 03:42:33 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-15 03:42:33 LOG5 finish_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2011-Dec-15 03:42:33 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-15 03:42:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 03:42:33 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-15 03:42:33 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2011-Dec-15 03:42:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-15 03:42:33 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-15 03:42:33 LOG5 finish_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2011-Dec-15 03:42:33 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-15 03:42:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 03:42:33 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-15 03:42:33 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2011-Dec-15 03:42:33 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2011-Dec-15 03:42:33 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2011-Dec-15 03:42:33 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2011-Dec-15 03:42:33 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2011-Dec-15 03:42:33 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20111215.a2048.0001.fits' is empty! 2011-Dec-15 03:42:33 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-15 03:42:33 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-15 03:42:33 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2011-Dec-15 03:42:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-15 03:42:33 START begin_task: Starting task 'selecting calibration type' 2011-Dec-15 03:42:33 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2011-Dec-15 03:42:33 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-15 03:42:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-15 03:42:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 03:42:33 START begin_task: Starting task 'waiting on setcal' 2011-Dec-15 03:42:33 LOG5 begin_task: Level: (5) ID = <10045> Status = 0 0 0 0 ok 2011-Dec-15 03:42:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2011-Dec-15 03:42:33 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-15 03:42:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 03:42:33 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:42:33 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-15 03:42:33 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-15 03:42:33 LOG5 end_task: Level: (5) ID = <10045> Status = 0 0 0 0 ok 2011-Dec-15 03:42:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-15 03:42:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-15 03:42:33 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-15 03:42:33 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-15 03:42:33 LOG5 begin_task: Level: (5) ID = <10046> Status = 0 0 0 0 ok 2011-Dec-15 03:42:33 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:42:34 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-15 03:42:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-15 03:42:34 LOG5 end_task: Level: (5) ID = <10046> Status = 0 0 0 0 ok 2011-Dec-15 03:42:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-15 03:42:34 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-15 03:42:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-15 03:42:34 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-15 03:42:34 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-15 03:42:34 LOG5 begin_task: Level: (5) ID = <10047> Status = 0 0 0 0 ok 2011-Dec-15 03:42:34 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-15 03:42:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-15 03:42:34 LOG5 end_task: Level: (5) ID = <10047> Status = 0 0 0 0 ok 2011-Dec-15 03:42:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-15 03:42:34 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-15 03:42:34 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-15 03:42:34 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2011-Dec-15 03:42:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-15 03:42:34 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-15 03:42:34 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-15 03:42:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-15 03:42:34 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2011-Dec-15 03:42:34 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-15 03:42:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-15 03:42:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-15 03:42:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-15 03:42:34 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2011-Dec-15 03:42:34 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-15 03:42:34 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-15 03:42:34 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2011-Dec-15 03:42:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-15 03:42:34 LOG5 log_alfabeam: Parameters: 9.8674999999999997 20.229638888888889 8.833591 2011.9559330557456 -65.800041 2011-Dec-15 03:42:34 LOG4 log_alfabeam: ALFABEAM 0 9.867499999999998 20.229638888888889 2011-Dec-15 03:42:34 LOG4 log_alfabeam: ALFABEAM 1 9.868740031490654 20.139711783212739 2011-Dec-15 03:42:34 LOG4 log_alfabeam: ALFABEAM 2 9.874593304473912 20.199475436129092 2011-Dec-15 03:42:34 LOG4 log_alfabeam: ALFABEAM 3 9.873330964242712 20.289864488047176 2011-Dec-15 03:42:34 LOG4 log_alfabeam: ALFABEAM 4 9.866220795084638 20.319394143303054 2011-Dec-15 03:42:34 LOG4 log_alfabeam: ALFABEAM 5 9.860400052633665 20.259254356764647 2011-Dec-15 03:42:34 LOG4 log_alfabeam: ALFABEAM 6 9.861656946251736 20.169960430350610 2011-Dec-15 03:42:34 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-15 03:42:34 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-15 03:42:34 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-15 03:42:34 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_147 2011-Dec-15 03:42:34 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-15 03:42:34 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-15 03:42:34 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-15 03:42:34 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-15 03:42:34 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-15 03:42:34 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-15 03:42:34 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-15 03:42:34 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-15 03:42:34 LOG3 take_mock_data: PSET configuration: patternid=134900001 2011-Dec-15 03:42:34 LOG3 take_mock_data: PSET configuration: scanid=134900001 2011-Dec-15 03:42:34 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-15 03:42:34 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-15 03:42:34 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-15 03:42:34 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456364230.0 2011-Dec-15 03:42:34 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306364230.0 2011-Dec-15 03:42:34 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-15 03:42:34 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-15 03:42:34 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_147:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=134900001:scanid=134900001:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456364230.0:topobfreqhz=1306364230.0:filetype=1 2011-Dec-15 03:42:34 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-15 03:42:34 LOG5 begin_task: Level: (5) ID = <10050> Status = 0 0 0 0 ok 2011-Dec-15 03:42:34 LOG4 from_mock: From MOCK: psetok 2011-Dec-15 03:42:34 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-15 03:42:34 LOG5 end_task: Level: (5) ID = <10050> Status = 0 0 0 0 ok 2011-Dec-15 03:42:34 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-15 03:42:34 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-15 03:42:34 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-15 03:42:34 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-15 03:42:34 LOG5 begin_task: Level: (5) ID = <10051> Status = 0 0 0 0 ok 2011-Dec-15 03:42:34 LOG4 from_mock: From MOCK: starok 2011-Dec-15 03:42:34 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-15 03:42:34 LOG5 end_task: Level: (5) ID = <10051> Status = 0 0 0 0 ok 2011-Dec-15 03:42:34 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-15 03:42:34 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134900001 2011-Dec-15 03:42:35 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-15 03:42:35 LOG5 begin_task: Level: (5) ID = <10052> Status = 0 0 0 0 ok 2011-Dec-15 03:42:35 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-15 03:42:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-15 03:42:35 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-15 03:42:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-15 03:42:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27756.00 2011-Dec-15 03:42:36 INFO2 got_mock_message: Mock spectrometer start file number is 00000 2011-Dec-15 03:42:36 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-15 03:42:36 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-15 03:42:36 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-15 03:42:36 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-15 03:42:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-15 03:42:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-15 03:42:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-15 03:42:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-15 03:42:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-15 03:42:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-15 03:42:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-15 03:42:36 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-15 03:42:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 03:42:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 03:42:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 03:42:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 03:42:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 03:42:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 03:42:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 03:42:39 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:42:39.01 2011-Dec-15 03:42:39 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323934959.01 Thu Dec 15 03:42:39 2011 2011-Dec-15 03:42:39 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-15 03:42:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.364230 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-15 03:42:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.364230 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 03:42:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.364230 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 03:42:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.364230 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-15 03:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.493 (still bad) 2011-Dec-15 03:42:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.364230 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 03:42:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.364230 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 03:42:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.364230 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 03:42:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.364230 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-15 03:42:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.364230 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-15 03:42:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-15 03:42:45 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-15 03:42:45 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-15 03:42:45 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-15 03:42:45 LOG5 end_task: Level: (5) ID = <10052> Status = 0 0 0 0 ok 2011-Dec-15 03:42:45 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-15 03:42:45 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2011-Dec-15 03:42:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-15 03:42:45 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-15 03:42:45 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-15 03:42:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-15 03:42:45 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2011-Dec-15 03:42:45 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-15 03:42:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-15 03:42:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-15 03:42:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-15 03:42:45 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2011-Dec-15 03:42:45 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-15 03:42:45 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-15 03:42:45 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2011-Dec-15 03:42:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-15 03:42:45 LOG5 log_alfabeam: Parameters: 9.8674999999999997 20.229638888888889 8.836654 2011.9559334043147 -65.800041 2011-Dec-15 03:42:45 LOG4 log_alfabeam: ALFABEAM 0 9.867500000000000 20.229638888888889 2011-Dec-15 03:42:45 LOG4 log_alfabeam: ALFABEAM 1 9.868743121262975 20.139720141400506 2011-Dec-15 03:42:45 LOG4 log_alfabeam: ALFABEAM 2 9.874594354667636 20.199523910436522 2011-Dec-15 03:42:45 LOG4 log_alfabeam: ALFABEAM 3 9.873328829270299 20.289905820846645 2011-Dec-15 03:42:45 LOG4 log_alfabeam: ALFABEAM 4 9.866217593567757 20.319384998307502 2011-Dec-15 03:42:45 LOG4 log_alfabeam: ALFABEAM 5 9.860399011671870 20.259204371219607 2011-Dec-15 03:42:45 LOG4 log_alfabeam: ALFABEAM 6 9.861659011660640 20.169920801651500 2011-Dec-15 03:42:45 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-15 03:42:45 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-15 03:42:45 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-15 03:42:45 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_147 2011-Dec-15 03:42:45 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-15 03:42:45 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-15 03:42:45 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-15 03:42:45 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-15 03:42:45 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-15 03:42:45 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-15 03:42:45 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-15 03:42:45 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-15 03:42:45 LOG3 take_mock_data: PSET configuration: patternid=134900001 2011-Dec-15 03:42:45 LOG3 take_mock_data: PSET configuration: scanid=134900002 2011-Dec-15 03:42:45 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-15 03:42:45 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-15 03:42:45 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-15 03:42:45 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456364230.0 2011-Dec-15 03:42:45 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306364230.0 2011-Dec-15 03:42:45 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-15 03:42:45 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-15 03:42:45 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_147:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=134900001:scanid=134900002:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456364230.0:topobfreqhz=1306364230.0:filetype=1 2011-Dec-15 03:42:45 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-15 03:42:45 LOG5 begin_task: Level: (5) ID = <10055> Status = 0 0 0 0 ok 2011-Dec-15 03:42:45 LOG4 from_mock: From MOCK: psetok 2011-Dec-15 03:42:45 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-15 03:42:45 LOG5 end_task: Level: (5) ID = <10055> Status = 0 0 0 0 ok 2011-Dec-15 03:42:45 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-15 03:42:45 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-15 03:42:45 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-15 03:42:45 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-15 03:42:45 LOG5 begin_task: Level: (5) ID = <10056> Status = 0 0 0 0 ok 2011-Dec-15 03:42:45 LOG4 from_mock: From MOCK: starok 2011-Dec-15 03:42:45 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-15 03:42:45 LOG5 end_task: Level: (5) ID = <10056> Status = 0 0 0 0 ok 2011-Dec-15 03:42:45 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-15 03:42:45 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134900002 2011-Dec-15 03:42:45 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-15 03:42:45 LOG5 begin_task: Level: (5) ID = <10057> Status = 0 0 0 0 ok 2011-Dec-15 03:42:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-15 03:42:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-15 03:42:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27766.00 2011-Dec-15 03:42:46 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-15 03:42:46 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-15 03:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.501 (still bad) 2011-Dec-15 03:42:47 INFO2 got_mock_message: Mock spectrometer start file number is 00100 2011-Dec-15 03:42:47 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-15 03:42:47 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-15 03:42:47 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-15 03:42:47 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-15 03:42:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-15 03:42:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-15 03:42:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-15 03:42:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-15 03:42:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-15 03:42:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-15 03:42:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-15 03:42:47 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-15 03:42:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 03:42:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 03:42:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 03:42:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 03:42:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 03:42:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 03:42:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 03:42:50 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:42:50.01 2011-Dec-15 03:42:50 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323934970.01 Thu Dec 15 03:42:50 2011 2011-Dec-15 03:42:50 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-15 03:42:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.364230 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-15 03:42:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.364230 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 03:42:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.364230 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 03:42:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.364230 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-15 03:42:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.364230 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 03:42:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.364230 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 03:42:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.364230 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 03:42:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.364230 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-15 03:42:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.364230 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-15 03:42:51 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-15 03:42:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-15 03:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-15 03:42:56 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-15 03:42:56 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-15 03:42:56 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-15 03:42:56 LOG5 end_task: Level: (5) ID = <10057> Status = 0 0 0 0 ok 2011-Dec-15 03:42:56 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-15 03:42:56 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2011-Dec-15 03:42:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-15 03:42:56 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-15 03:42:56 LOG5 finish_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2011-Dec-15 03:42:56 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-15 03:42:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 03:42:56 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-15 03:42:56 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2011-Dec-15 03:42:56 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-15 03:42:56 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 260.45 and ZA = 14.96 2011-Dec-15 03:42:56 LOG3 track_source: Calling 'track_source AGES3193_p3_147 260.45 14.9576279407 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-15 03:42:56 START begin_task: Starting task 'sending tracking commands' 2011-Dec-15 03:42:56 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2011-Dec-15 03:42:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_147} INFO {Slewing to source 'AGES3193_p3_147' ...} 2011-Dec-15 03:42:56 INFO1 track_source: Starting to track AGES3193_p3_147 2011-Dec-15 03:42:56 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_147" 2011-Dec-15 03:42:56 LOG3 vw_send: To DATATAKING: set ra 260.45 2011-Dec-15 03:42:56 LOG3 vw_send: To DATATAKING: set dec 14.9576279407 2011-Dec-15 03:42:56 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-15 03:42:56 LOG3 vw_send: To DATATAKING: pnt tr 260.45 14.9576279407 -CF 2011-Dec-15 03:42:56 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 03:42:56 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-15 03:42:56 LOG5 finish_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2011-Dec-15 03:42:56 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-15 03:42:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 03:42:56 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-15 03:42:56 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2011-Dec-15 03:42:56 LOG1 fixed_driftmap: Parameters: HA = -01:02:56.0 Start = 08:50:45.5 LST = 08:50:23.0 diff = 22.5 secs 2011-Dec-15 03:42:56 INFO2 fixed_driftmap: Waiting 20.5 seconds for RA 9:53:42 2011-Dec-15 03:42:56 INFO2 lstwait: Waiting for 20.5 secs from LST 08:50:23 to LST 08:50:44 ... 2011-Dec-15 03:42:56 LOG4 send_obs_status: To obs_status: <1> TASKTIME 20.469284726943613 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-15 03:42:56 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-15 03:42:56 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2011-Dec-15 03:42:56 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_147" 2011-Dec-15 03:42:56 LOG4 got_cormsg: From DATATAKING: set ra 260.45 2011-Dec-15 03:42:56 LOG4 got_cormsg: From DATATAKING: set dec 14.9576279407 2011-Dec-15 03:42:56 LOG4 got_cormsg: From DATATAKING: vw% 260.45 2011-Dec-15 03:42:56 LOG4 got_cormsg: From DATATAKING: vw% 14.9576279407 2011-Dec-15 03:42:56 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:42:56 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-15 03:42:56 LOG4 got_cormsg: From DATATAKING: pnt tr 260.45 14.9576279407 -CF 2011-Dec-15 03:42:56 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 03:42:56 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-15 03:42:56 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 03:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-15 03:43:16 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-15 03:43:16 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2011-Dec-15 03:43:17 LOG4 lstwait: Finished waiting 0.53 seconds late 2011-Dec-15 03:43:17 INFO3 lstwait: Finished waiting 2011-Dec-15 03:43:17 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-15 03:43:17 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-15 03:43:17 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-15 03:43:17 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-15 03:43:17 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-15 03:43:17 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-15 03:43:17 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2011-Dec-15 03:43:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-15 03:43:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-15 03:43:17 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-15 03:43:17 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-15 03:43:17 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-15 03:43:17 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_147 2011-Dec-15 03:43:17 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-15 03:43:17 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-15 03:43:17 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-15 03:43:17 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-15 03:43:17 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-15 03:43:17 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-15 03:43:17 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-15 03:43:17 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-15 03:43:17 LOG3 take_mock_data: PSET configuration: patternid=134900003 2011-Dec-15 03:43:17 LOG3 take_mock_data: PSET configuration: scanid=134900003 2011-Dec-15 03:43:17 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-15 03:43:17 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-15 03:43:17 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-15 03:43:17 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456364230.0 2011-Dec-15 03:43:17 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306364230.0 2011-Dec-15 03:43:17 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-15 03:43:17 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-15 03:43:17 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_147:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=134900003:scanid=134900003:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456364230.0:topobfreqhz=1306364230.0:filetype=1 2011-Dec-15 03:43:17 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-15 03:43:17 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2011-Dec-15 03:43:17 LOG4 from_mock: From MOCK: psetok 2011-Dec-15 03:43:17 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-15 03:43:17 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2011-Dec-15 03:43:17 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-15 03:43:17 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-15 03:43:17 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-15 03:43:17 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-15 03:43:17 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2011-Dec-15 03:43:17 LOG4 from_mock: From MOCK: starok 2011-Dec-15 03:43:17 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-15 03:43:17 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2011-Dec-15 03:43:17 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-15 03:43:17 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 134900003 2011-Dec-15 03:43:17 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-15 03:43:17 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2011-Dec-15 03:43:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-15 03:43:17 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-15 03:43:17 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-15 03:43:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-15 03:43:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27798.00 2011-Dec-15 03:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.364230 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-15 03:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.364230 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 03:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.364230 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 03:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.364230 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-15 03:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.364230 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 03:43:19 LOG3 WAPP=1+2+4-save_rfcalc: Channel 5: Sky freq = 1381.364230 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 03:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.364230 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 03:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.364230 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-15 03:43:19 INFO2 got_mock_message: Mock spectrometer start file number is 00200 2011-Dec-15 03:43:19 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-15 03:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.364230 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-15 03:43:19 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2011-Dec-15 03:43:19 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-15 03:43:19 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-15 03:43:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-15 03:43:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-15 03:43:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-15 03:43:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-15 03:43:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-15 03:43:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-15 03:43:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-15 03:43:19 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-15 03:43:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 03:43:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 03:43:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 03:43:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 03:43:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 03:43:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 03:43:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 03:43:19 LOG3 WAPP=3-save_rfcalc: Channel 5: Sky freq = 1381.364230 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 03:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-15 03:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-15 03:43:22 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:43:22.02 2011-Dec-15 03:43:22 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323935002.02 Thu Dec 15 03:43:22 2011 2011-Dec-15 03:43:22 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-15 03:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-15 03:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-15 03:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-15 03:43:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-15 03:43:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.107 0.948 0.951 2011-Dec-15 03:43:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.940 1.049 1.091 0.923 2011-Dec-15 03:43:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.846 0.927 1.004 0.910 2011-Dec-15 03:43:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.014 1.032 0.014 2011-Dec-15 03:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-15 03:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-15 03:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-15 03:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-15 03:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-15 03:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-15 03:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-15 03:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-15 03:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-15 03:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-15 03:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-15 03:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-15 03:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-15 03:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-15 03:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-15 03:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-15 03:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-15 03:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-15 03:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-15 03:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-15 03:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-15 03:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-15 03:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-15 03:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-15 03:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-15 03:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-15 03:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-15 03:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2011-Dec-15 03:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-15 03:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-15 03:44:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-15 03:44:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 1.112 0.950 0.950 2011-Dec-15 03:44:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 1.052 1.094 0.924 2011-Dec-15 03:44:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.847 0.930 1.009 0.911 2011-Dec-15 03:44:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.014 1.033 0.014 2011-Dec-15 03:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-15 03:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-15 03:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-15 03:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-15 03:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-15 03:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-15 03:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-15 03:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-15 03:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-15 03:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-15 03:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-15 03:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-15 03:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-15 03:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-15 03:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-15 03:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-15 03:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2011-Dec-15 03:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2011-Dec-15 03:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2011-Dec-15 03:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-15 03:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-15 03:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-15 03:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-15 03:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-15 03:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-15 03:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-15 03:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-15 03:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2011-Dec-15 03:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-15 03:45:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-15 03:45:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 1.112 0.946 0.949 2011-Dec-15 03:45:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 1.052 1.095 0.926 2011-Dec-15 03:45:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.850 0.934 1.009 0.910 2011-Dec-15 03:45:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.014 1.030 0.014 2011-Dec-15 03:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-15 03:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-15 03:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2011-Dec-15 03:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2011-Dec-15 03:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-15 03:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2011-Dec-15 03:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2011-Dec-15 03:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-15 03:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2011-Dec-15 03:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2011-Dec-15 03:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2011-Dec-15 03:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2011-Dec-15 03:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-15 03:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-15 03:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2011-Dec-15 03:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2011-Dec-15 03:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-15 03:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2011-Dec-15 03:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2011-Dec-15 03:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-15 03:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2011-Dec-15 03:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2011-Dec-15 03:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-15 03:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2011-Dec-15 03:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2011-Dec-15 03:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-15 03:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-15 03:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2011-Dec-15 03:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2011-Dec-15 03:46:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-15 03:46:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 1.112 0.947 0.949 2011-Dec-15 03:46:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 1.054 1.090 0.923 2011-Dec-15 03:46:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.847 0.928 1.007 0.910 2011-Dec-15 03:46:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.022 1.031 0.023 2011-Dec-15 03:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-15 03:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-15 03:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-15 03:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2011-Dec-15 03:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-15 03:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-15 03:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-15 03:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-15 03:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-15 03:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-15 03:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-15 03:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-15 03:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-15 03:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-15 03:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.111 (still bad) 2011-Dec-15 03:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2011-Dec-15 03:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2011-Dec-15 03:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2011-Dec-15 03:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2011-Dec-15 03:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2011-Dec-15 03:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-15 03:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-15 03:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-15 03:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2011-Dec-15 03:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2011-Dec-15 03:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-15 03:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2011-Dec-15 03:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-15 03:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2011-Dec-15 03:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2011-Dec-15 03:47:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2011-Dec-15 03:47:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 1.110 0.951 0.951 2011-Dec-15 03:47:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.864 1.053 1.092 0.921 2011-Dec-15 03:47:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.844 0.927 1.009 0.912 2011-Dec-15 03:47:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.019 1.031 0.019 2011-Dec-15 03:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-15 03:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-15 03:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-15 03:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2011-Dec-15 03:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-15 03:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-15 03:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-15 03:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-15 03:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-15 03:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-15 03:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-15 03:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-15 03:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-15 03:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.106 (still bad) 2011-Dec-15 03:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.104 (still bad) 2011-Dec-15 03:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2011-Dec-15 03:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2011-Dec-15 03:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2011-Dec-15 03:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-15 03:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.106 (still bad) 2011-Dec-15 03:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.106 (still bad) 2011-Dec-15 03:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.107 (still bad) 2011-Dec-15 03:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.105 (still bad) 2011-Dec-15 03:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2011-Dec-15 03:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-15 03:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.107 (still bad) 2011-Dec-15 03:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.104 (still bad) 2011-Dec-15 03:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2011-Dec-15 03:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.105 (still bad) 2011-Dec-15 03:48:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-15 03:48:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 1.108 0.947 0.947 2011-Dec-15 03:48:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.930 1.057 1.097 0.926 2011-Dec-15 03:48:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.847 0.929 1.008 0.914 2011-Dec-15 03:48:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.952 0.022 1.034 0.022 2011-Dec-15 03:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 03:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-15 03:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-15 03:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-15 03:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-15 03:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-15 03:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-15 03:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-15 03:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-15 03:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-15 03:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-15 03:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-15 03:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-15 03:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-15 03:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-15 03:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-15 03:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-15 03:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-15 03:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-15 03:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-15 03:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-15 03:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-15 03:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-15 03:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-15 03:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2011-Dec-15 03:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2011-Dec-15 03:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.111 (still bad) 2011-Dec-15 03:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2011-Dec-15 03:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2011-Dec-15 03:49:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-15 03:49:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 1.110 0.949 0.950 2011-Dec-15 03:49:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.942 1.058 1.097 0.928 2011-Dec-15 03:49:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.847 0.931 1.010 0.913 2011-Dec-15 03:49:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.024 1.034 0.024 2011-Dec-15 03:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.110 (still bad) 2011-Dec-15 03:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2011-Dec-15 03:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2011-Dec-15 03:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2011-Dec-15 03:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2011-Dec-15 03:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.112 (still bad) 2011-Dec-15 03:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-15 03:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-15 03:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-15 03:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-15 03:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-15 03:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-15 03:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-15 03:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-15 03:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-15 03:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-15 03:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-15 03:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-15 03:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-15 03:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-15 03:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-15 03:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-15 03:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-15 03:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-15 03:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-15 03:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-15 03:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-15 03:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-15 03:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-15 03:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-15 03:50:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-15 03:50:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.105 0.953 0.954 2011-Dec-15 03:50:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 1.048 1.093 0.922 2011-Dec-15 03:50:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.845 0.925 1.005 0.908 2011-Dec-15 03:50:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.020 1.030 0.020 2011-Dec-15 03:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-15 03:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-15 03:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-15 03:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-15 03:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.115 (still bad) 2011-Dec-15 03:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2011-Dec-15 03:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2011-Dec-15 03:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2011-Dec-15 03:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2011-Dec-15 03:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2011-Dec-15 03:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.115 (still bad) 2011-Dec-15 03:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2011-Dec-15 03:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2011-Dec-15 03:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2011-Dec-15 03:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2011-Dec-15 03:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2011-Dec-15 03:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.114 (still bad) 2011-Dec-15 03:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2011-Dec-15 03:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2011-Dec-15 03:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2011-Dec-15 03:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2011-Dec-15 03:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2011-Dec-15 03:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.115 (still bad) 2011-Dec-15 03:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2011-Dec-15 03:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2011-Dec-15 03:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2011-Dec-15 03:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2011-Dec-15 03:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2011-Dec-15 03:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 03:51:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-15 03:51:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.105 0.946 0.945 2011-Dec-15 03:51:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 1.051 1.092 0.921 2011-Dec-15 03:51:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.844 0.926 1.006 0.910 2011-Dec-15 03:51:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.020 1.030 0.020 2011-Dec-15 03:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-15 03:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-15 03:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-15 03:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-15 03:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 03:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-15 03:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-15 03:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-15 03:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-15 03:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-15 03:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-15 03:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 03:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-15 03:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 03:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 03:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 03:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-15 03:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-15 03:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-15 03:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-15 03:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-15 03:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 03:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-15 03:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-15 03:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-15 03:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-15 03:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-15 03:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 03:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-15 03:52:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-15 03:52:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 1.112 0.944 0.946 2011-Dec-15 03:52:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.930 1.048 1.090 0.922 2011-Dec-15 03:52:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.845 0.926 1.006 0.913 2011-Dec-15 03:52:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.020 1.032 0.020 2011-Dec-15 03:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-15 03:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-15 03:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-15 03:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-15 03:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-15 03:52:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-15 03:52:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-15 03:52:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-15 03:53:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-15 03:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-15 03:53:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-15 03:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-15 03:53:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-15 03:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-15 03:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-15 03:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 03:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-15 03:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-15 03:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-15 03:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-15 03:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-15 03:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 03:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-15 03:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-15 03:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-15 03:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-15 03:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-15 03:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-15 03:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2011-Dec-15 03:53:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-15 03:53:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 1.111 0.946 0.947 2011-Dec-15 03:53:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 1.048 1.093 0.922 2011-Dec-15 03:53:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.845 0.925 1.004 0.910 2011-Dec-15 03:53:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.022 1.029 0.022 2011-Dec-15 03:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2011-Dec-15 03:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2011-Dec-15 03:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2011-Dec-15 03:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2011-Dec-15 03:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2011-Dec-15 03:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2011-Dec-15 03:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.106 (still bad) 2011-Dec-15 03:53:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.106 (still bad) 2011-Dec-15 03:54:01 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2011-Dec-15 03:54:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2011-Dec-15 03:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2011-Dec-15 03:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2011-Dec-15 03:54:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-15 03:54:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2011-Dec-15 03:54:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-15 03:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2011-Dec-15 03:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-15 03:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2011-Dec-15 03:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2011-Dec-15 03:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2011-Dec-15 03:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2011-Dec-15 03:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2011-Dec-15 03:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-15 03:54:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-15 03:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2011-Dec-15 03:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-15 03:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-15 03:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2011-Dec-15 03:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2011-Dec-15 03:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2011-Dec-15 03:54:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-15 03:54:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.106 0.948 0.946 2011-Dec-15 03:54:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 1.047 1.092 0.923 2011-Dec-15 03:54:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.844 0.925 1.008 0.911 2011-Dec-15 03:54:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.021 1.031 0.021 2011-Dec-15 03:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-15 03:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-15 03:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-15 03:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-15 03:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-15 03:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-15 03:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-15 03:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-15 03:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2011-Dec-15 03:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.107 (still bad) 2011-Dec-15 03:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2011-Dec-15 03:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.107 (still bad) 2011-Dec-15 03:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.105 (still bad) 2011-Dec-15 03:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2011-Dec-15 03:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2011-Dec-15 03:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.106 (still bad) 2011-Dec-15 03:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2011-Dec-15 03:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.106 (still bad) 2011-Dec-15 03:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2011-Dec-15 03:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-15 03:55:28 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2011-Dec-15 03:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.106 (still bad) 2011-Dec-15 03:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2011-Dec-15 03:55:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.106 (still bad) 2011-Dec-15 03:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2011-Dec-15 03:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-15 03:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2011-Dec-15 03:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2011-Dec-15 03:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2011-Dec-15 03:55:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-15 03:55:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.108 0.946 0.944 2011-Dec-15 03:55:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 1.049 1.094 0.924 2011-Dec-15 03:55:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.843 0.927 1.007 0.913 2011-Dec-15 03:55:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.022 1.029 0.023 2011-Dec-15 03:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2011-Dec-15 03:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-15 03:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.105 (still bad) 2011-Dec-15 03:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-15 03:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2011-Dec-15 03:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-15 03:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2011-Dec-15 03:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-15 03:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2011-Dec-15 03:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2011-Dec-15 03:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2011-Dec-15 03:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2011-Dec-15 03:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-15 03:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-15 03:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-15 03:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-15 03:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-15 03:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-15 03:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-15 03:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-15 03:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-15 03:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-15 03:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2011-Dec-15 03:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-15 03:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-15 03:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-15 03:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-15 03:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-15 03:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2011-Dec-15 03:56:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2011-Dec-15 03:56:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.106 0.944 0.945 2011-Dec-15 03:56:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 1.045 1.091 0.922 2011-Dec-15 03:56:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.841 0.925 1.005 0.912 2011-Dec-15 03:56:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.019 1.030 0.020 2011-Dec-15 03:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2011-Dec-15 03:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 03:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-15 03:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-15 03:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-15 03:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-15 03:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-15 03:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-15 03:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-15 03:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-15 03:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-15 03:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-15 03:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-15 03:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2011-Dec-15 03:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-15 03:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-15 03:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-15 03:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-15 03:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-15 03:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-15 03:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-15 03:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-15 03:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-15 03:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-15 03:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-15 03:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-15 03:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-15 03:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-15 03:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 03:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-15 03:57:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-15 03:57:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 1.113 0.948 0.946 2011-Dec-15 03:57:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.947 1.048 1.089 0.922 2011-Dec-15 03:57:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.841 0.926 1.009 0.911 2011-Dec-15 03:57:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.020 1.032 0.020 2011-Dec-15 03:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2011-Dec-15 03:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-15 03:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2011-Dec-15 03:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-15 03:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.105 (still bad) 2011-Dec-15 03:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2011-Dec-15 03:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2011-Dec-15 03:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2011-Dec-15 03:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.106 (still bad) 2011-Dec-15 03:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-15 03:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2011-Dec-15 03:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2011-Dec-15 03:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2011-Dec-15 03:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2011-Dec-15 03:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2011-Dec-15 03:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2011-Dec-15 03:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2011-Dec-15 03:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.107 (still bad) 2011-Dec-15 03:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2011-Dec-15 03:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.107 (still bad) 2011-Dec-15 03:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.106 (still bad) 2011-Dec-15 03:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.111 (still bad) 2011-Dec-15 03:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.106 (still bad) 2011-Dec-15 03:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-15 03:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-15 03:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-15 03:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-15 03:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-15 03:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-15 03:58:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-15 03:58:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.941 1.117 0.955 0.954 2011-Dec-15 03:58:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 1.048 1.093 0.926 2011-Dec-15 03:58:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.848 0.931 1.015 0.920 2011-Dec-15 03:58:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.956 0.020 1.040 0.020 2011-Dec-15 03:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-15 03:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-15 03:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-15 03:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-15 03:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-15 03:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-15 03:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-15 03:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-15 03:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-15 03:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-15 03:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-15 03:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-15 03:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2011-Dec-15 03:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-15 03:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2011-Dec-15 03:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2011-Dec-15 03:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2011-Dec-15 03:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-15 03:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2011-Dec-15 03:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-15 03:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-15 03:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-15 03:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2011-Dec-15 03:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-15 03:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2011-Dec-15 03:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2011-Dec-15 03:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-15 03:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2011-Dec-15 03:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2011-Dec-15 03:59:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-15 03:59:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.942 1.120 0.954 0.954 2011-Dec-15 03:59:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 1.052 1.093 0.925 2011-Dec-15 03:59:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.844 0.927 1.010 0.914 2011-Dec-15 03:59:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.956 0.022 1.040 0.022 2011-Dec-15 03:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-15 03:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2011-Dec-15 03:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-15 03:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2011-Dec-15 04:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2011-Dec-15 04:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2011-Dec-15 04:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2011-Dec-15 04:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-15 04:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-15 04:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.111 (still bad) 2011-Dec-15 04:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2011-Dec-15 04:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-15 04:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-15 04:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-15 04:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-15 04:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-15 04:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-15 04:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-15 04:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-15 04:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-15 04:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-15 04:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-15 04:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-15 04:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-15 04:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2011-Dec-15 04:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-15 04:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-15 04:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2011-Dec-15 04:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-15 04:00:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-15 04:00:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 1.117 0.952 0.952 2011-Dec-15 04:00:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 1.051 1.095 0.926 2011-Dec-15 04:00:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.843 0.928 1.011 0.914 2011-Dec-15 04:00:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.951 0.022 1.036 0.022 2011-Dec-15 04:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-15 04:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2011-Dec-15 04:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-15 04:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2011-Dec-15 04:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-15 04:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-15 04:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2011-Dec-15 04:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-15 04:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-15 04:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2011-Dec-15 04:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2011-Dec-15 04:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-15 04:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2011-Dec-15 04:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2011-Dec-15 04:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2011-Dec-15 04:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2011-Dec-15 04:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2011-Dec-15 04:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2011-Dec-15 04:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2011-Dec-15 04:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2011-Dec-15 04:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2011-Dec-15 04:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2011-Dec-15 04:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2011-Dec-15 04:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-15 04:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2011-Dec-15 04:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2011-Dec-15 04:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-15 04:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2011-Dec-15 04:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2011-Dec-15 04:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-15 04:01:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-15 04:01:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 1.112 0.947 0.948 2011-Dec-15 04:01:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 1.051 1.091 0.923 2011-Dec-15 04:01:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.844 0.925 1.008 0.912 2011-Dec-15 04:01:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.021 1.032 0.021 2011-Dec-15 04:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2011-Dec-15 04:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2011-Dec-15 04:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2011-Dec-15 04:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 04:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-15 04:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-15 04:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-15 04:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-15 04:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-15 04:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-15 04:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-15 04:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-15 04:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-15 04:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-15 04:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-15 04:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-15 04:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-15 04:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2011-Dec-15 04:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-15 04:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2011-Dec-15 04:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2011-Dec-15 04:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-15 04:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.107 (still bad) 2011-Dec-15 04:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2011-Dec-15 04:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-15 04:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2011-Dec-15 04:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2011-Dec-15 04:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-15 04:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-15 04:02:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-15 04:02:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 1.109 0.947 0.947 2011-Dec-15 04:02:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 1.047 1.094 0.925 2011-Dec-15 04:02:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.843 0.926 1.007 0.913 2011-Dec-15 04:02:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.021 1.033 0.021 2011-Dec-15 04:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-15 04:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-15 04:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2011-Dec-15 04:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-15 04:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2011-Dec-15 04:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2011-Dec-15 04:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-15 04:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2011-Dec-15 04:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-15 04:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2011-Dec-15 04:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2011-Dec-15 04:03:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-15 04:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2011-Dec-15 04:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2011-Dec-15 04:03:23 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-15 04:03:23 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-15 04:03:23 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-15 04:03:23 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2011-Dec-15 04:03:23 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-15 04:03:23 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2011-Dec-15 04:03:23 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-15 04:03:23 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2011-Dec-15 04:03:23 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-15 04:03:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-15 04:03:23 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-15 04:03:23 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2011-Dec-15 04:03:23 COMMAND run_command_line: EXECUTING command 13: 'ENDIF' 2011-Dec-15 04:03:23 COMMAND run_command_line: EXECUTING command 16: 'IF LSTSLEW(AGES3193_p3_149) < 091410 THEN' 2011-Dec-15 04:03:23 LOG3 is_if_valid: Current source data: up 618.3 10.2 UP - - 126 2.0 2011-Dec-15 04:03:23 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_149) < 091410 2011-Dec-15 04:03:23 INFO5 is_if_valid: Condition parsed as: 9.2148183333333336 < 9.2361111111111107 2011-Dec-15 04:03:23 COMMAND run_command_line: EXECUTING command 17: 'FIXEDDRIFT az=257.65 alfaangle=-60.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_149 ra=95300.00 dec=201100.00' 2011-Dec-15 04:03:23 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-15 04:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2011-Dec-15 04:03:24 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-15 04:03:24 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 257.65 -60.3 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_149 95300.00 201100.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-15 04:03:24 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-15 04:03:24 LOG5 begin_task: Level: (2) ID = <10064> Status = 0 0 0 0 ok 2011-Dec-15 04:03:24 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_147' 2011-Dec-15 04:03:24 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-15 04:03:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_149} 2011-Dec-15 04:03:24 INFO3 fixed_driftmap: Sending telescope to Az = 257.65 and ZA = 9.49 2011-Dec-15 04:03:24 LOG3 track_source: Calling 'track_source AGES3193_p3_149 257.65 9.4877349720 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-15 04:03:24 START begin_task: Starting task 'sending tracking commands' 2011-Dec-15 04:03:24 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2011-Dec-15 04:03:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_149} INFO {Slewing to source 'AGES3193_p3_149' ...} 2011-Dec-15 04:03:24 INFO1 track_source: Starting to track AGES3193_p3_149 2011-Dec-15 04:03:24 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_149" 2011-Dec-15 04:03:24 LOG3 vw_send: To DATATAKING: set ra 257.65 2011-Dec-15 04:03:24 LOG3 vw_send: To DATATAKING: set dec 9.4877349720 2011-Dec-15 04:03:24 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-15 04:03:24 LOG3 vw_send: To DATATAKING: pnt tr 257.65 9.4877349720 -CF 2011-Dec-15 04:03:24 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 04:03:24 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-15 04:03:24 LOG5 finish_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2011-Dec-15 04:03:24 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-15 04:03:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 04:03:24 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-15 04:03:24 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2011-Dec-15 04:03:24 START begin_task: Starting task 'rotate ALFA to -60.3 degrees' 2011-Dec-15 04:03:24 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2011-Dec-15 04:03:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -60.3 degrees ...} 2011-Dec-15 04:03:24 INFO2 rotate_alfa: ALFA commanded to -60.3 degrees 2011-Dec-15 04:03:24 LOG3 sock_errsend: To ALFAMOTOR: POSITION -60.3 REPLY 2011-Dec-15 04:03:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-15 04:03:24 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-15 04:03:24 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2011-Dec-15 04:03:24 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_149" 2011-Dec-15 04:03:24 LOG4 got_cormsg: From DATATAKING: set ra 257.65 2011-Dec-15 04:03:24 LOG4 got_cormsg: From DATATAKING: set dec 9.4877349720 2011-Dec-15 04:03:24 LOG4 got_cormsg: From DATATAKING: vw% 257.65 2011-Dec-15 04:03:24 LOG4 got_cormsg: From DATATAKING: vw% 9.4877349720 2011-Dec-15 04:03:24 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:03:24 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-15 04:03:24 LOG4 got_cormsg: From DATATAKING: pnt tr 257.65 9.4877349720 -CF 2011-Dec-15 04:03:24 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 04:03:24 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-15 04:03:24 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:03:29 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-15 04:03:29 INFO3 alfa_motor: ALFA rotator in-position -60.30 degrees 2011-Dec-15 04:03:29 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-15 04:03:29 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2011-Dec-15 04:03:29 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-15 04:03:29 STOP finish_task: Finishing task 'rotate ALFA to -60.3 degrees' 2011-Dec-15 04:03:29 LOG5 finish_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2011-Dec-15 04:03:29 INFO2 finish_task: DONE finished configuration: rotating ALFA to -60.3 degrees 2011-Dec-15 04:03:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 04:03:29 STOP end_task: Finishing task 'rotate ALFA to -60.3 degrees' with status 'OK' 2011-Dec-15 04:03:29 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2011-Dec-15 04:03:29 START begin_task: Starting task 'waiting on telescope' 2011-Dec-15 04:03:29 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2011-Dec-15 04:03:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-15 04:03:29 LOG3 waittrk: Start waittrk 5 2011-Dec-15 04:03:29 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-15 04:03:29 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2011-Dec-15 04:03:34 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-15 04:03:34 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2011-Dec-15 04:03:34 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-15 04:03:34 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2011-Dec-15 04:05:45 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-15 04:05:45 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2011-Dec-15 04:05:45 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-15 04:05:45 INFO2 waittrk: Now tracking AGES3193_p3_149 2011-Dec-15 04:05:45 LOG4 waittrk: Current telescope position: Az = 617.16 ZA = 9.49 2011-Dec-15 04:05:45 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-15 04:05:45 LOG5 finish_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2011-Dec-15 04:05:45 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-15 04:05:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 04:05:45 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-15 04:05:45 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2011-Dec-15 04:05:45 START begin_task: Starting task 'selecting calibration type' 2011-Dec-15 04:05:45 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2011-Dec-15 04:05:45 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-15 04:05:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-15 04:05:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 04:05:45 START begin_task: Starting task 'waiting on setcal' 2011-Dec-15 04:05:45 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2011-Dec-15 04:05:46 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-15 04:05:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 04:05:47 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:05:47 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-15 04:05:47 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-15 04:05:47 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2011-Dec-15 04:05:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-15 04:05:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-15 04:05:47 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-15 04:05:47 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-15 04:05:47 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2011-Dec-15 04:05:47 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:05:47 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-15 04:05:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-15 04:05:47 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2011-Dec-15 04:05:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-15 04:05:47 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-15 04:05:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-15 04:05:47 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-15 04:05:47 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-15 04:05:47 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2011-Dec-15 04:05:47 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-15 04:05:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-15 04:05:47 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2011-Dec-15 04:05:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-15 04:05:47 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-15 04:05:47 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-15 04:05:47 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2011-Dec-15 04:05:47 LOG5 dopset_later: Calling 'dopset_later 52.758622300837025' 2011-Dec-15 04:05:47 INFO3 dopset_later: Setting Doppler correction for 04:06:40 (52.8 seconds from now) 2011-Dec-15 04:05:47 LOG5 antvel: Calling 'antvel 257.650000 9.487735 F Heliocentric 52.758622300837025' 2011-Dec-15 04:05:47 LOG2 antvel: Transforming current Az = 257.65 ZA = 9.49 to apparent RA = 09:53:41.4 Dec = +20:07:23.3 2011-Dec-15 04:05:47 LOG2 antvel: Parameters to Doppler: Heliocentric 29200 2011 349 0.0 2011-Dec-15 04:05:47 INFO5 antvel: Computed antenna velocity: -26.17876 km/s 2011-Dec-15 04:05:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-26.178763357099999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-15 04:05:47 INFO4 dopset_gen: New sky frequencies: 1381.364053 1381.364053 1381.364053 1381.364053 1381.364053 1381.364053 1381.364053 1381.364053 1381.364053 2011-Dec-15 04:05:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.364053 sky0=1381.364053 sky1=1381.364053 sky2=1381.364053 sky3=1381.364053 sky4=1381.364053 sky5=1381.364053 sky6=1381.364053 sky7=1381.364053 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-15 04:05:47 LOG2 dopset_gen: Result from 'sky2syn': 1631.364053 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-15 04:05:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631364053.0} 2011-Dec-15 04:05:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 04:05:47 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-15 04:05:47 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-15 04:05:47 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:11.8 Dec = +20:10:46.8 2011-Dec-15 04:05:47 LOG3 track_source: Calling 'track_source AGES3193_p3_149 095211.8 201046.8 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-15 04:05:47 START begin_task: Starting task 'sending tracking commands' 2011-Dec-15 04:05:47 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2011-Dec-15 04:05:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_149} INFO {Slewing to source 'AGES3193_p3_149' ...} 2011-Dec-15 04:05:47 INFO1 track_source: Starting to track AGES3193_p3_149 2011-Dec-15 04:05:47 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_149" 2011-Dec-15 04:05:47 LOG3 vw_send: To DATATAKING: set ra 095211.8 2011-Dec-15 04:05:47 LOG3 vw_send: To DATATAKING: set dec 201046.8 2011-Dec-15 04:05:47 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-15 04:05:47 LOG3 vw_send: To DATATAKING: pnt tr 095211.8 201046.8 -CJ 2011-Dec-15 04:05:48 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 04:05:48 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-15 04:05:48 LOG5 finish_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2011-Dec-15 04:05:48 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-15 04:05:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 04:05:48 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-15 04:05:48 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2011-Dec-15 04:05:48 START begin_task: Starting task 'waiting on telescope' 2011-Dec-15 04:05:48 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2011-Dec-15 04:05:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-15 04:05:48 LOG3 waittrk: Start waittrk 5 2011-Dec-15 04:05:48 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-15 04:05:48 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2011-Dec-15 04:05:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631364053.0} 2011-Dec-15 04:05:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 04:05:48 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-15 04:05:48 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_149" 2011-Dec-15 04:05:48 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:05:48 LOG4 got_cormsg: From DATATAKING: set ra 095211.8 2011-Dec-15 04:05:48 LOG4 got_cormsg: From DATATAKING: set dec 201046.8 2011-Dec-15 04:05:48 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-15 04:05:48 LOG4 got_cormsg: From DATATAKING: pnt tr 095211.8 201046.8 -CJ 2011-Dec-15 04:05:48 LOG4 got_cormsg: From DATATAKING: 095211.8 2011-Dec-15 04:05:48 LOG4 got_cormsg: From DATATAKING: vw% 201046.8 2011-Dec-15 04:05:48 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2011-Dec-15 04:05:48 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 04:05:48 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:05:53 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-15 04:05:53 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2011-Dec-15 04:05:53 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-15 04:05:53 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2011-Dec-15 04:05:56 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-15 04:05:56 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2011-Dec-15 04:05:56 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-15 04:05:56 INFO2 waittrk: Now tracking AGES3193_p3_149 2011-Dec-15 04:05:56 LOG4 waittrk: Current telescope position: Az = 617.17 ZA = 9.47 2011-Dec-15 04:05:56 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-15 04:05:56 LOG5 finish_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2011-Dec-15 04:05:56 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-15 04:05:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 04:05:56 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-15 04:05:56 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2011-Dec-15 04:05:56 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-15 04:05:56 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2011-Dec-15 04:05:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-15 04:05:56 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-15 04:05:56 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-15 04:05:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-15 04:05:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 04:05:56 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-15 04:05:56 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2011-Dec-15 04:05:56 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-15 04:05:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 04:05:59 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:05:59 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-15 04:05:59 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-15 04:05:59 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2011-Dec-15 04:05:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-15 04:05:59 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-15 04:05:59 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2011-Dec-15 04:05:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-15 04:05:59 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-15 04:05:59 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-15 04:05:59 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-15 04:05:59 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-15 04:05:59 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-15 04:05:59 LOG5 begin_task: Level: (5) ID = <10082> Status = 0 0 0 0 ok 2011-Dec-15 04:05:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-15 04:05:59 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:05:59 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 8 6 dB 2011-Dec-15 04:05:59 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 3 dB 2011-Dec-15 04:05:59 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 2 dB 2011-Dec-15 04:06:00 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2011-Dec-15 04:06:00 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-15 04:06:00 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-15 04:06:00 LOG5 end_task: Level: (5) ID = <10082> Status = 0 0 0 0 ok 2011-Dec-15 04:06:00 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.904 1.075 ALFA beam 1: 0.915 0.919 2011-Dec-15 04:06:00 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.899 0.988 ALFA beam 3: 1.047 1.111 2011-Dec-15 04:06:00 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.829 1.107 ALFA beam 5: 0.969 1.110 2011-Dec-15 04:06:00 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.910 0.014 ALFA beam 7: 0.991 0.014 2011-Dec-15 04:06:00 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-15 04:06:00 LOG5 finish_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2011-Dec-15 04:06:00 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-15 04:06:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 04:06:00 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-15 04:06:00 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2011-Dec-15 04:06:00 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-15 04:06:00 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2011-Dec-15 04:06:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-15 04:06:00 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-15 04:06:00 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-15 04:06:00 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-15 04:06:00 LOG5 begin_task: Level: (5) ID = <10084> Status = 0 0 0 0 ok 2011-Dec-15 04:06:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-15 04:06:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.904 1.075 0.915 0.919 2011-Dec-15 04:06:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.899 0.988 1.047 1.111 2011-Dec-15 04:06:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.107 0.969 1.110 2011-Dec-15 04:06:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.910 0.014 0.991 0.014 2011-Dec-15 04:06:06 INFO3 from_mock: From MOCK: b0s0g0 rms:A 32.0 28.1 B 30.4 30.4 mn:A 0.1 0.1 B -0.2 -0.2 gn: 11 11 2011-Dec-15 04:06:06 INFO3 from_mock: From MOCK: b0s1g0 rms:A 32.2 30.8 B 28.1 29.8 mn:A 0.2 -0.4 B -0.3 0.2 gn: 12 11 2011-Dec-15 04:06:06 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.8 28.8 B 32.9 28.8 mn:A 0.7 0.7 B 0.1 -0.1 gn: 7 11 2011-Dec-15 04:06:06 INFO3 from_mock: From MOCK: b1s1g0 rms:A 30.1 27.8 B 31.2 31.2 mn:A -0.3 -0.3 B 0.5 0.1 gn: 8 10 2011-Dec-15 04:06:06 INFO3 from_mock: From MOCK: b2s0g0 rms:A 32.1 31.2 B 28.1 29.5 mn:A -0.0 -0.3 B 0.4 0.0 gn: 11 11 2011-Dec-15 04:06:06 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.3 29.6 B 32.7 30.4 mn:A 0.1 -0.2 B 0.1 0.2 gn: 11 12 2011-Dec-15 04:06:06 INFO3 from_mock: From MOCK: b3s0g0 rms:A 28.9 28.7 B 31.1 27.7 mn:A 0.4 -0.3 B -0.0 -0.3 gn: 12 12 2011-Dec-15 04:06:06 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.2 29.5 B 29.5 30.7 mn:A -0.3 0.2 B 0.1 0.0 gn: 12 12 2011-Dec-15 04:06:06 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.3 29.4 B 31.6 31.7 mn:A -0.2 -0.4 B -0.4 -0.1 gn: 13 12 2011-Dec-15 04:06:06 INFO3 from_mock: From MOCK: b4s1g0 rms:A 32.4 29.3 B 30.4 29.3 mn:A -0.0 0.0 B -0.3 0.2 gn: 16 13 2011-Dec-15 04:06:06 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.6 28.5 B 31.0 31.0 mn:A 0.3 0.4 B -0.1 0.4 gn: 12 11 2011-Dec-15 04:06:06 INFO3 from_mock: From MOCK: b5s1g0 rms:A 29.7 29.5 B 31.2 31.0 mn:A -0.4 0.3 B -0.1 0.2 gn: 12 11 2011-Dec-15 04:06:06 INFO3 from_mock: From MOCK: b6s0g0 rms:A 29.6 27.1 B 14.2 14.6 mn:A -0.4 0.2 B 0.3 -0.5 gn: 12 31 2011-Dec-15 04:06:06 INFO3 from_mock: From MOCK: b6s1g0 rms:A 30.1 27.4 B 11.2 10.9 mn:A 0.6 0.4 B 0.1 0.1 gn: 13 31 2011-Dec-15 04:06:06 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-15 04:06:06 LOG5 end_task: Level: (5) ID = <10084> Status = 0 0 0 0 ok 2011-Dec-15 04:06:06 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-15 04:06:06 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-15 04:06:06 LOG5 finish_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2011-Dec-15 04:06:06 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-15 04:06:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 04:06:06 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-15 04:06:06 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2011-Dec-15 04:06:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-15 04:06:06 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-15 04:06:06 LOG5 finish_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2011-Dec-15 04:06:06 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-15 04:06:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 04:06:06 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-15 04:06:06 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2011-Dec-15 04:06:06 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2011-Dec-15 04:06:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2011-Dec-15 04:06:06 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2011-Dec-15 04:06:06 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2011-Dec-15 04:06:06 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-15 04:06:06 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-15 04:06:06 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2011-Dec-15 04:06:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-15 04:06:06 START begin_task: Starting task 'selecting calibration type' 2011-Dec-15 04:06:06 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2011-Dec-15 04:06:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-15 04:06:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-15 04:06:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 04:06:06 START begin_task: Starting task 'waiting on setcal' 2011-Dec-15 04:06:06 LOG5 begin_task: Level: (5) ID = <10087> Status = 0 0 0 0 ok 2011-Dec-15 04:06:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2011-Dec-15 04:06:06 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-15 04:06:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 04:06:06 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:06:06 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-15 04:06:06 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-15 04:06:06 LOG5 end_task: Level: (5) ID = <10087> Status = 0 0 0 0 ok 2011-Dec-15 04:06:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-15 04:06:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-15 04:06:06 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-15 04:06:06 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-15 04:06:06 LOG5 begin_task: Level: (5) ID = <10088> Status = 0 0 0 0 ok 2011-Dec-15 04:06:06 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:06:07 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-15 04:06:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-15 04:06:07 LOG5 end_task: Level: (5) ID = <10088> Status = 0 0 0 0 ok 2011-Dec-15 04:06:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-15 04:06:07 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-15 04:06:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-15 04:06:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-15 04:06:07 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-15 04:06:07 LOG5 begin_task: Level: (5) ID = <10089> Status = 0 0 0 0 ok 2011-Dec-15 04:06:07 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-15 04:06:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-15 04:06:07 LOG5 end_task: Level: (5) ID = <10089> Status = 0 0 0 0 ok 2011-Dec-15 04:06:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-15 04:06:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-15 04:06:07 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-15 04:06:07 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2011-Dec-15 04:06:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-15 04:06:07 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-15 04:06:07 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-15 04:06:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-15 04:06:07 LOG5 begin_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2011-Dec-15 04:06:07 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-15 04:06:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-15 04:06:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-15 04:06:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-15 04:06:07 LOG5 end_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2011-Dec-15 04:06:07 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-15 04:06:07 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-15 04:06:07 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2011-Dec-15 04:06:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-15 04:06:07 LOG5 log_alfabeam: Parameters: 9.869944444444446 20.179666666666666 9.227165 2011.9559778310138 -60.300026 2011-Dec-15 04:06:07 LOG4 log_alfabeam: ALFABEAM 0 9.869944444444444 20.179666666666680 2011-Dec-15 04:06:07 LOG4 log_alfabeam: ALFABEAM 1 9.870991212437232 20.089454916977544 2011-Dec-15 04:06:07 LOG4 log_alfabeam: ALFABEAM 2 9.876951398670210 20.149306780295259 2011-Dec-15 04:06:07 LOG4 log_alfabeam: ALFABEAM 3 9.875866582119825 20.240327686048250 2011-Dec-15 04:06:07 LOG4 log_alfabeam: ALFABEAM 4 9.868834969958234 20.269725776021293 2011-Dec-15 04:06:07 LOG4 log_alfabeam: ALFABEAM 5 9.862929714370184 20.209058626452148 2011-Dec-15 04:06:07 LOG4 log_alfabeam: ALFABEAM 6 9.864001066515979 20.119806629990013 2011-Dec-15 04:06:07 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-15 04:06:07 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-15 04:06:07 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-15 04:06:07 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_149 2011-Dec-15 04:06:07 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-15 04:06:07 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-15 04:06:07 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-15 04:06:07 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-15 04:06:07 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-15 04:06:07 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-15 04:06:07 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-15 04:06:07 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-15 04:06:07 LOG3 take_mock_data: PSET configuration: patternid=134900003 2011-Dec-15 04:06:07 LOG3 take_mock_data: PSET configuration: scanid=134900004 2011-Dec-15 04:06:07 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-15 04:06:07 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-15 04:06:07 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-15 04:06:07 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456364053.0 2011-Dec-15 04:06:07 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306364053.0 2011-Dec-15 04:06:07 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-15 04:06:07 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-15 04:06:07 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_149:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=134900003:scanid=134900004:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456364053.0:topobfreqhz=1306364053.0:filetype=1 2011-Dec-15 04:06:07 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-15 04:06:07 LOG5 begin_task: Level: (5) ID = <10092> Status = 0 0 0 0 ok 2011-Dec-15 04:06:07 LOG4 from_mock: From MOCK: psetok 2011-Dec-15 04:06:07 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-15 04:06:07 LOG5 end_task: Level: (5) ID = <10092> Status = 0 0 0 0 ok 2011-Dec-15 04:06:07 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-15 04:06:07 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-15 04:06:07 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-15 04:06:07 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-15 04:06:07 LOG5 begin_task: Level: (5) ID = <10093> Status = 0 0 0 0 ok 2011-Dec-15 04:06:07 NOTE WAPPDATA-new_file: New FITS file: wapp.20111215.a2048.0002.fits 2011-Dec-15 04:06:07 LOG4 from_mock: From MOCK: starok 2011-Dec-15 04:06:07 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-15 04:06:07 LOG5 end_task: Level: (5) ID = <10093> Status = 0 0 0 0 ok 2011-Dec-15 04:06:07 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-15 04:06:07 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134900004 2011-Dec-15 04:06:08 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-15 04:06:08 LOG5 begin_task: Level: (5) ID = <10094> Status = 0 0 0 0 ok 2011-Dec-15 04:06:08 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111215.a2048.0002.fits} 2011-Dec-15 04:06:08 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-15 04:06:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-15 04:06:08 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-15 04:06:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-15 04:06:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29169.00 2011-Dec-15 04:06:09 INFO2 got_mock_message: Mock spectrometer start file number is 00300 2011-Dec-15 04:06:09 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-15 04:06:09 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-15 04:06:09 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-15 04:06:09 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-15 04:06:09 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-15 04:06:09 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-15 04:06:09 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-15 04:06:09 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-15 04:06:09 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-15 04:06:09 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-15 04:06:09 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-15 04:06:09 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-15 04:06:09 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:06:09 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:06:09 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:06:09 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:06:09 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:06:09 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:06:09 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:06:12 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:06:12.02 2011-Dec-15 04:06:12 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323936372.02 Thu Dec 15 04:06:12 2011 2011-Dec-15 04:06:12 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-15 04:06:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.364053 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-15 04:06:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.364053 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 04:06:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.364053 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 04:06:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.364053 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-15 04:06:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.364053 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 04:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.524 (still bad) 2011-Dec-15 04:06:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.364053 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 04:06:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.364053 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 04:06:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.364053 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-15 04:06:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.364053 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-15 04:06:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-15 04:06:18 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-15 04:06:18 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-15 04:06:18 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-15 04:06:18 LOG5 end_task: Level: (5) ID = <10094> Status = 0 0 0 0 ok 2011-Dec-15 04:06:18 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-15 04:06:18 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2011-Dec-15 04:06:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-15 04:06:18 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-15 04:06:18 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-15 04:06:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-15 04:06:18 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2011-Dec-15 04:06:18 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-15 04:06:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-15 04:06:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-15 04:06:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-15 04:06:18 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2011-Dec-15 04:06:18 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-15 04:06:18 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-15 04:06:18 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2011-Dec-15 04:06:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-15 04:06:18 LOG5 log_alfabeam: Parameters: 9.869944444444446 20.179666666666666 9.230229 2011.9559781795826 -60.300026 2011-Dec-15 04:06:18 LOG4 log_alfabeam: ALFABEAM 0 9.869944444444442 20.179666666666670 2011-Dec-15 04:06:18 LOG4 log_alfabeam: ALFABEAM 1 9.870997492932119 20.089469406188151 2011-Dec-15 04:06:18 LOG4 log_alfabeam: ALFABEAM 2 9.876953547417582 20.149403653379366 2011-Dec-15 04:06:18 LOG4 log_alfabeam: ALFABEAM 3 9.875862197014827 20.240413237726173 2011-Dec-15 04:06:18 LOG4 log_alfabeam: ALFABEAM 4 9.868828408996862 20.269709698527866 2011-Dec-15 04:06:18 LOG4 log_alfabeam: ALFABEAM 5 9.862927614998275 20.208957458278775 2011-Dec-15 04:06:18 LOG4 log_alfabeam: ALFABEAM 6 9.864005274763231 20.119724685819509 2011-Dec-15 04:06:18 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-15 04:06:18 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-15 04:06:18 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-15 04:06:18 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_149 2011-Dec-15 04:06:18 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-15 04:06:18 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-15 04:06:18 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-15 04:06:18 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-15 04:06:18 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-15 04:06:18 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-15 04:06:18 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-15 04:06:18 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-15 04:06:18 LOG3 take_mock_data: PSET configuration: patternid=134900003 2011-Dec-15 04:06:18 LOG3 take_mock_data: PSET configuration: scanid=134900005 2011-Dec-15 04:06:18 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-15 04:06:18 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-15 04:06:18 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-15 04:06:18 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456364053.0 2011-Dec-15 04:06:18 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306364053.0 2011-Dec-15 04:06:18 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-15 04:06:18 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-15 04:06:18 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_149:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=134900003:scanid=134900005:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456364053.0:topobfreqhz=1306364053.0:filetype=1 2011-Dec-15 04:06:18 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-15 04:06:18 LOG5 begin_task: Level: (5) ID = <10097> Status = 0 0 0 0 ok 2011-Dec-15 04:06:18 LOG4 from_mock: From MOCK: psetok 2011-Dec-15 04:06:18 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-15 04:06:18 LOG5 end_task: Level: (5) ID = <10097> Status = 0 0 0 0 ok 2011-Dec-15 04:06:18 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-15 04:06:18 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-15 04:06:18 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-15 04:06:18 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-15 04:06:18 LOG5 begin_task: Level: (5) ID = <10098> Status = 0 0 0 0 ok 2011-Dec-15 04:06:18 LOG4 from_mock: From MOCK: starok 2011-Dec-15 04:06:18 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-15 04:06:18 LOG5 end_task: Level: (5) ID = <10098> Status = 0 0 0 0 ok 2011-Dec-15 04:06:18 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-15 04:06:18 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134900005 2011-Dec-15 04:06:18 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-15 04:06:18 LOG5 begin_task: Level: (5) ID = <10099> Status = 0 0 0 0 ok 2011-Dec-15 04:06:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-15 04:06:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-15 04:06:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29179.00 2011-Dec-15 04:06:19 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-15 04:06:19 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-15 04:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.553 (still bad) 2011-Dec-15 04:06:21 INFO2 got_mock_message: Mock spectrometer start file number is 00400 2011-Dec-15 04:06:21 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-15 04:06:21 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-15 04:06:21 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-15 04:06:21 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-15 04:06:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-15 04:06:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-15 04:06:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-15 04:06:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-15 04:06:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-15 04:06:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-15 04:06:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-15 04:06:21 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-15 04:06:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:06:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:06:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:06:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:06:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:06:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:06:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:06:24 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:06:24.01 2011-Dec-15 04:06:24 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323936384.01 Thu Dec 15 04:06:24 2011 2011-Dec-15 04:06:24 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-15 04:06:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.364053 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-15 04:06:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.364053 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 04:06:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.364053 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 04:06:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.364053 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-15 04:06:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.364053 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 04:06:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.364053 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 04:06:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.364053 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 04:06:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.364053 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-15 04:06:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.364053 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-15 04:06:24 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-15 04:06:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-15 04:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-15 04:06:30 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-15 04:06:30 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-15 04:06:30 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-15 04:06:30 LOG5 end_task: Level: (5) ID = <10099> Status = 0 0 0 0 ok 2011-Dec-15 04:06:30 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-15 04:06:30 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2011-Dec-15 04:06:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-15 04:06:30 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-15 04:06:30 LOG5 finish_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2011-Dec-15 04:06:30 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-15 04:06:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 04:06:30 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-15 04:06:30 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2011-Dec-15 04:06:30 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-15 04:06:30 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 257.65 and ZA = 9.49 2011-Dec-15 04:06:30 LOG3 track_source: Calling 'track_source AGES3193_p3_149 257.65 9.4877349720 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-15 04:06:30 START begin_task: Starting task 'sending tracking commands' 2011-Dec-15 04:06:30 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2011-Dec-15 04:06:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_149} INFO {Slewing to source 'AGES3193_p3_149' ...} 2011-Dec-15 04:06:30 INFO1 track_source: Starting to track AGES3193_p3_149 2011-Dec-15 04:06:30 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_149" 2011-Dec-15 04:06:30 LOG3 vw_send: To DATATAKING: set ra 257.65 2011-Dec-15 04:06:30 LOG3 vw_send: To DATATAKING: set dec 9.4877349720 2011-Dec-15 04:06:30 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-15 04:06:30 LOG3 vw_send: To DATATAKING: pnt tr 257.65 9.4877349720 -CF 2011-Dec-15 04:06:30 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 04:06:30 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-15 04:06:30 LOG5 finish_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2011-Dec-15 04:06:30 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-15 04:06:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 04:06:30 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-15 04:06:30 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2011-Dec-15 04:06:30 LOG1 fixed_driftmap: Parameters: HA = -00:39:29.9 Start = 09:14:11.6 LST = 09:14:00.9 diff = 10.8 secs 2011-Dec-15 04:06:30 INFO2 fixed_driftmap: Waiting 8.8 seconds for RA 9:53:42 2011-Dec-15 04:06:30 INFO2 lstwait: Waiting for 8.8 secs from LST 09:14:01 to LST 09:14:10 ... 2011-Dec-15 04:06:30 LOG4 send_obs_status: To obs_status: <1> TASKTIME 8.7626777193962635 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-15 04:06:30 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-15 04:06:30 LOG5 begin_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2011-Dec-15 04:06:30 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_149" 2011-Dec-15 04:06:30 LOG4 got_cormsg: From DATATAKING: set ra 257.65 2011-Dec-15 04:06:30 LOG4 got_cormsg: From DATATAKING: set dec 9.4877349720 2011-Dec-15 04:06:30 LOG4 got_cormsg: From DATATAKING: vw% 257.65 2011-Dec-15 04:06:30 LOG4 got_cormsg: From DATATAKING: vw% 9.4877349720 2011-Dec-15 04:06:30 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:06:30 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-15 04:06:30 LOG4 got_cormsg: From DATATAKING: pnt tr 257.65 9.4877349720 -CF 2011-Dec-15 04:06:30 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 04:06:30 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-15 04:06:30 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-15 04:06:39 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-15 04:06:39 LOG5 end_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2011-Dec-15 04:06:39 LOG4 lstwait: Finished waiting 0.23 seconds late 2011-Dec-15 04:06:39 INFO3 lstwait: Finished waiting 2011-Dec-15 04:06:39 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-15 04:06:39 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-15 04:06:39 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-15 04:06:39 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-15 04:06:39 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-15 04:06:39 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-15 04:06:39 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2011-Dec-15 04:06:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-15 04:06:39 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-15 04:06:39 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-15 04:06:39 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-15 04:06:39 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-15 04:06:39 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_149 2011-Dec-15 04:06:39 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-15 04:06:39 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-15 04:06:39 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-15 04:06:39 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-15 04:06:39 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-15 04:06:39 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-15 04:06:39 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-15 04:06:39 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-15 04:06:39 LOG3 take_mock_data: PSET configuration: patternid=134900006 2011-Dec-15 04:06:39 LOG3 take_mock_data: PSET configuration: scanid=134900006 2011-Dec-15 04:06:39 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-15 04:06:39 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-15 04:06:39 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-15 04:06:39 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456364053.0 2011-Dec-15 04:06:39 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306364053.0 2011-Dec-15 04:06:39 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-15 04:06:39 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-15 04:06:39 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_149:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=134900006:scanid=134900006:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456364053.0:topobfreqhz=1306364053.0:filetype=1 2011-Dec-15 04:06:39 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-15 04:06:39 LOG5 begin_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2011-Dec-15 04:06:39 LOG4 from_mock: From MOCK: psetok 2011-Dec-15 04:06:39 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-15 04:06:39 LOG5 end_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2011-Dec-15 04:06:39 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-15 04:06:39 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-15 04:06:39 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-15 04:06:39 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-15 04:06:39 LOG5 begin_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2011-Dec-15 04:06:39 LOG4 from_mock: From MOCK: starok 2011-Dec-15 04:06:39 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-15 04:06:39 LOG5 end_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2011-Dec-15 04:06:39 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-15 04:06:39 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 134900006 2011-Dec-15 04:06:40 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-15 04:06:40 LOG5 begin_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2011-Dec-15 04:06:40 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-15 04:06:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-15 04:06:40 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-15 04:06:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-15 04:06:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29201.00 2011-Dec-15 04:06:42 INFO2 got_mock_message: Mock spectrometer start file number is 00500 2011-Dec-15 04:06:42 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-15 04:06:42 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2011-Dec-15 04:06:42 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-15 04:06:42 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-15 04:06:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-15 04:06:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-15 04:06:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-15 04:06:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-15 04:06:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-15 04:06:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-15 04:06:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-15 04:06:42 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-15 04:06:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 04:06:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 04:06:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 04:06:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 04:06:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 04:06:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 04:06:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 04:06:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.364053 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-15 04:06:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.364053 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 04:06:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.364053 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 04:06:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.364053 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-15 04:06:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.364053 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 04:06:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.364053 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 04:06:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.364053 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 04:06:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.364053 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-15 04:06:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.364053 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-15 04:06:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-15 04:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-15 04:06:45 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:06:45.02 2011-Dec-15 04:06:45 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323936405.02 Thu Dec 15 04:06:45 2011 2011-Dec-15 04:06:45 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-15 04:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-15 04:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-15 04:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-15 04:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2011-Dec-15 04:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-15 04:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-15 04:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2011-Dec-15 04:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2011-Dec-15 04:07:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-15 04:07:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.908 1.081 0.914 0.923 2011-Dec-15 04:07:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.901 0.988 1.050 1.111 2011-Dec-15 04:07:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.108 0.968 1.129 2011-Dec-15 04:07:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.912 0.014 0.992 0.014 2011-Dec-15 04:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2011-Dec-15 04:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2011-Dec-15 04:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2011-Dec-15 04:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2011-Dec-15 04:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2011-Dec-15 04:07:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2011-Dec-15 04:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2011-Dec-15 04:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2011-Dec-15 04:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2011-Dec-15 04:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2011-Dec-15 04:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2011-Dec-15 04:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2011-Dec-15 04:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2011-Dec-15 04:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2011-Dec-15 04:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2011-Dec-15 04:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2011-Dec-15 04:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2011-Dec-15 04:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2011-Dec-15 04:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2011-Dec-15 04:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2011-Dec-15 04:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2011-Dec-15 04:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2011-Dec-15 04:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2011-Dec-15 04:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2011-Dec-15 04:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2011-Dec-15 04:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2011-Dec-15 04:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2011-Dec-15 04:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2011-Dec-15 04:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2011-Dec-15 04:08:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-15 04:08:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.909 1.084 0.914 0.922 2011-Dec-15 04:08:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.905 0.996 1.056 1.120 2011-Dec-15 04:08:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.832 1.109 0.969 1.130 2011-Dec-15 04:08:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.912 0.020 0.992 0.020 2011-Dec-15 04:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2011-Dec-15 04:08:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2011-Dec-15 04:08:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2011-Dec-15 04:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2011-Dec-15 04:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2011-Dec-15 04:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2011-Dec-15 04:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2011-Dec-15 04:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2011-Dec-15 04:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2011-Dec-15 04:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2011-Dec-15 04:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2011-Dec-15 04:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2011-Dec-15 04:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2011-Dec-15 04:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2011-Dec-15 04:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2011-Dec-15 04:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2011-Dec-15 04:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2011-Dec-15 04:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2011-Dec-15 04:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2011-Dec-15 04:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2011-Dec-15 04:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2011-Dec-15 04:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2011-Dec-15 04:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2011-Dec-15 04:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2011-Dec-15 04:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2011-Dec-15 04:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2011-Dec-15 04:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2011-Dec-15 04:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2011-Dec-15 04:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2011-Dec-15 04:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.140 (still bad) 2011-Dec-15 04:09:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-15 04:09:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.906 1.081 0.913 0.922 2011-Dec-15 04:09:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.902 0.993 1.052 1.114 2011-Dec-15 04:09:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.831 1.109 0.969 1.132 2011-Dec-15 04:09:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.914 0.020 0.991 0.020 2011-Dec-15 04:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2011-Dec-15 04:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2011-Dec-15 04:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2011-Dec-15 04:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2011-Dec-15 04:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.141 (still bad) 2011-Dec-15 04:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2011-Dec-15 04:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2011-Dec-15 04:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2011-Dec-15 04:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2011-Dec-15 04:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2011-Dec-15 04:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2011-Dec-15 04:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2011-Dec-15 04:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2011-Dec-15 04:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2011-Dec-15 04:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2011-Dec-15 04:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2011-Dec-15 04:09:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2011-Dec-15 04:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2011-Dec-15 04:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2011-Dec-15 04:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2011-Dec-15 04:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2011-Dec-15 04:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2011-Dec-15 04:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2011-Dec-15 04:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2011-Dec-15 04:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2011-Dec-15 04:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2011-Dec-15 04:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2011-Dec-15 04:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2011-Dec-15 04:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2011-Dec-15 04:10:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-15 04:10:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.909 1.083 0.917 0.927 2011-Dec-15 04:10:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.903 0.994 1.054 1.118 2011-Dec-15 04:10:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.832 1.113 0.969 1.133 2011-Dec-15 04:10:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.021 0.994 0.021 2011-Dec-15 04:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2011-Dec-15 04:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2011-Dec-15 04:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2011-Dec-15 04:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2011-Dec-15 04:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.134 (still bad) 2011-Dec-15 04:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.133 (still bad) 2011-Dec-15 04:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-15 04:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-15 04:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-15 04:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-15 04:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-15 04:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-15 04:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-15 04:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-15 04:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-15 04:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2011-Dec-15 04:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2011-Dec-15 04:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2011-Dec-15 04:10:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2011-Dec-15 04:10:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2011-Dec-15 04:10:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2011-Dec-15 04:10:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2011-Dec-15 04:10:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2011-Dec-15 04:10:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2011-Dec-15 04:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2011-Dec-15 04:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2011-Dec-15 04:11:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2011-Dec-15 04:11:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2011-Dec-15 04:11:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-15 04:11:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.908 1.081 0.914 0.924 2011-Dec-15 04:11:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.906 0.998 1.055 1.116 2011-Dec-15 04:11:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.830 1.112 0.972 1.132 2011-Dec-15 04:11:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.914 0.021 0.995 0.021 2011-Dec-15 04:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2011-Dec-15 04:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2011-Dec-15 04:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2011-Dec-15 04:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2011-Dec-15 04:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-15 04:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.132 (still bad) 2011-Dec-15 04:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.132 (still bad) 2011-Dec-15 04:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.132 (still bad) 2011-Dec-15 04:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.133 (still bad) 2011-Dec-15 04:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.135 (still bad) 2011-Dec-15 04:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.132 (still bad) 2011-Dec-15 04:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.130 (still bad) 2011-Dec-15 04:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.131 (still bad) 2011-Dec-15 04:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.131 (still bad) 2011-Dec-15 04:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.132 (still bad) 2011-Dec-15 04:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.134 (still bad) 2011-Dec-15 04:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2011-Dec-15 04:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.131 (still bad) 2011-Dec-15 04:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2011-Dec-15 04:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2011-Dec-15 04:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2011-Dec-15 04:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2011-Dec-15 04:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2011-Dec-15 04:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2011-Dec-15 04:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2011-Dec-15 04:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.131 (still bad) 2011-Dec-15 04:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2011-Dec-15 04:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.136 (still bad) 2011-Dec-15 04:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-15 04:12:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-15 04:12:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.909 1.083 0.915 0.924 2011-Dec-15 04:12:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.901 0.994 1.057 1.117 2011-Dec-15 04:12:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.832 1.111 0.972 1.133 2011-Dec-15 04:12:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.023 0.995 0.023 2011-Dec-15 04:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.134 (still bad) 2011-Dec-15 04:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.134 (still bad) 2011-Dec-15 04:12:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.134 (still bad) 2011-Dec-15 04:12:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-15 04:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2011-Dec-15 04:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2011-Dec-15 04:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2011-Dec-15 04:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2011-Dec-15 04:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2011-Dec-15 04:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2011-Dec-15 04:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2011-Dec-15 04:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2011-Dec-15 04:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2011-Dec-15 04:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2011-Dec-15 04:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2011-Dec-15 04:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.141 (still bad) 2011-Dec-15 04:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.140 (still bad) 2011-Dec-15 04:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.139 (still bad) 2011-Dec-15 04:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.139 (still bad) 2011-Dec-15 04:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2011-Dec-15 04:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2011-Dec-15 04:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2011-Dec-15 04:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2011-Dec-15 04:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2011-Dec-15 04:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2011-Dec-15 04:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2011-Dec-15 04:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2011-Dec-15 04:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2011-Dec-15 04:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2011-Dec-15 04:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2011-Dec-15 04:13:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-15 04:13:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.911 1.086 0.915 0.927 2011-Dec-15 04:13:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.901 0.996 1.058 1.118 2011-Dec-15 04:13:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.833 1.111 0.973 1.133 2011-Dec-15 04:13:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.021 0.994 0.021 2011-Dec-15 04:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2011-Dec-15 04:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2011-Dec-15 04:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.139 (still bad) 2011-Dec-15 04:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2011-Dec-15 04:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2011-Dec-15 04:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2011-Dec-15 04:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2011-Dec-15 04:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2011-Dec-15 04:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.139 (still bad) 2011-Dec-15 04:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.132 (still bad) 2011-Dec-15 04:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.132 (still bad) 2011-Dec-15 04:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.135 (still bad) 2011-Dec-15 04:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.134 (still bad) 2011-Dec-15 04:13:39 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.132 (still bad) 2011-Dec-15 04:13:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-15 04:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.132 (still bad) 2011-Dec-15 04:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.133 (still bad) 2011-Dec-15 04:13:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.133 (still bad) 2011-Dec-15 04:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.132 (still bad) 2011-Dec-15 04:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.132 (still bad) 2011-Dec-15 04:13:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-15 04:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.133 (still bad) 2011-Dec-15 04:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.132 (still bad) 2011-Dec-15 04:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.133 (still bad) 2011-Dec-15 04:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.132 (still bad) 2011-Dec-15 04:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.132 (still bad) 2011-Dec-15 04:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.138 (still bad) 2011-Dec-15 04:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.132 (still bad) 2011-Dec-15 04:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.132 (still bad) 2011-Dec-15 04:14:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-15 04:14:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.908 1.085 0.926 0.936 2011-Dec-15 04:14:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.899 0.993 1.059 1.117 2011-Dec-15 04:14:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.830 1.111 0.970 1.131 2011-Dec-15 04:14:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.911 0.026 0.992 0.026 2011-Dec-15 04:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.131 (still bad) 2011-Dec-15 04:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.131 (still bad) 2011-Dec-15 04:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.131 (still bad) 2011-Dec-15 04:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.131 (still bad) 2011-Dec-15 04:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.131 (still bad) 2011-Dec-15 04:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.131 (still bad) 2011-Dec-15 04:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.132 (still bad) 2011-Dec-15 04:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.131 (still bad) 2011-Dec-15 04:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.132 (still bad) 2011-Dec-15 04:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.132 (still bad) 2011-Dec-15 04:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.132 (still bad) 2011-Dec-15 04:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.129 (still bad) 2011-Dec-15 04:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-15 04:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.130 (still bad) 2011-Dec-15 04:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.131 (still bad) 2011-Dec-15 04:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.132 (still bad) 2011-Dec-15 04:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.132 (still bad) 2011-Dec-15 04:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.134 (still bad) 2011-Dec-15 04:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.134 (still bad) 2011-Dec-15 04:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.133 (still bad) 2011-Dec-15 04:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.132 (still bad) 2011-Dec-15 04:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.131 (still bad) 2011-Dec-15 04:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.133 (still bad) 2011-Dec-15 04:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-15 04:15:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.132 (still bad) 2011-Dec-15 04:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.132 (still bad) 2011-Dec-15 04:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2011-Dec-15 04:15:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-15 04:15:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.910 1.085 0.913 0.923 2011-Dec-15 04:15:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.896 0.991 1.062 1.121 2011-Dec-15 04:15:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.828 1.111 0.969 1.133 2011-Dec-15 04:15:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.911 0.024 0.993 0.024 2011-Dec-15 04:15:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.134 (still bad) 2011-Dec-15 04:15:16 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.139 (still bad) 2011-Dec-15 04:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.134 (still bad) 2011-Dec-15 04:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.133 (still bad) 2011-Dec-15 04:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.135 (still bad) 2011-Dec-15 04:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.134 (still bad) 2011-Dec-15 04:15:26 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.133 (still bad) 2011-Dec-15 04:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.139 (still bad) 2011-Dec-15 04:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.133 (still bad) 2011-Dec-15 04:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.133 (still bad) 2011-Dec-15 04:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.134 (still bad) 2011-Dec-15 04:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.134 (still bad) 2011-Dec-15 04:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.133 (still bad) 2011-Dec-15 04:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.142 (still bad) 2011-Dec-15 04:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2011-Dec-15 04:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2011-Dec-15 04:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.140 (still bad) 2011-Dec-15 04:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2011-Dec-15 04:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.139 (still bad) 2011-Dec-15 04:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.148 (still bad) 2011-Dec-15 04:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2011-Dec-15 04:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.140 (still bad) 2011-Dec-15 04:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.140 (still bad) 2011-Dec-15 04:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-15 04:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-15 04:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.144 (still bad) 2011-Dec-15 04:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.136 (still bad) 2011-Dec-15 04:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.137 (still bad) 2011-Dec-15 04:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.139 (still bad) 2011-Dec-15 04:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2011-Dec-15 04:16:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2011-Dec-15 04:16:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.913 1.087 0.916 0.927 2011-Dec-15 04:16:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.893 0.997 1.060 1.121 2011-Dec-15 04:16:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.831 1.114 0.975 1.137 2011-Dec-15 04:16:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.916 0.019 0.997 0.019 2011-Dec-15 04:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.143 (still bad) 2011-Dec-15 04:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2011-Dec-15 04:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2011-Dec-15 04:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2011-Dec-15 04:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2011-Dec-15 04:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2011-Dec-15 04:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-15 04:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-15 04:16:35 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-15 04:16:37 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-15 04:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-15 04:16:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2011-Dec-15 04:16:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2011-Dec-15 04:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2011-Dec-15 04:16:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2011-Dec-15 04:16:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2011-Dec-15 04:16:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2011-Dec-15 04:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-15 04:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-15 04:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-15 04:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-15 04:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-15 04:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-15 04:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.138 (still bad) 2011-Dec-15 04:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-15 04:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.138 (still bad) 2011-Dec-15 04:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-15 04:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-15 04:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-15 04:17:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-15 04:17:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.913 1.090 0.917 0.928 2011-Dec-15 04:17:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 1.004 1.068 1.128 2011-Dec-15 04:17:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.835 1.117 0.975 1.139 2011-Dec-15 04:17:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.024 0.999 0.024 2011-Dec-15 04:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-15 04:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-15 04:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-15 04:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2011-Dec-15 04:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-15 04:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.138 (still bad) 2011-Dec-15 04:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-15 04:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-15 04:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-15 04:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-15 04:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-15 04:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-15 04:17:43 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 16-31 errors 2011-Dec-15 04:17:43 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 8-15 errors 2011-Dec-15 04:17:43 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 4-7 errors 2011-Dec-15 04:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-15 04:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-15 04:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-15 04:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-15 04:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-15 04:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-15 04:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-15 04:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-15 04:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-15 04:18:07 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 2-3 errors 2011-Dec-15 04:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-15 04:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.134 (still bad) 2011-Dec-15 04:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-15 04:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-15 04:18:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-15 04:18:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.913 1.090 0.916 0.929 2011-Dec-15 04:18:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.913 0.993 1.062 1.119 2011-Dec-15 04:18:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.830 1.112 0.975 1.135 2011-Dec-15 04:18:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.915 0.024 0.998 0.024 2011-Dec-15 04:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2011-Dec-15 04:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.134 (still bad) 2011-Dec-15 04:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.133 (still bad) 2011-Dec-15 04:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.134 (still bad) 2011-Dec-15 04:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2011-Dec-15 04:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.136 (still bad) 2011-Dec-15 04:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2011-Dec-15 04:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.136 (still bad) 2011-Dec-15 04:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2011-Dec-15 04:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2011-Dec-15 04:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.136 (still bad) 2011-Dec-15 04:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-15 04:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.134 (still bad) 2011-Dec-15 04:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-15 04:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.134 (still bad) 2011-Dec-15 04:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.135 (still bad) 2011-Dec-15 04:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-15 04:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2011-Dec-15 04:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2011-Dec-15 04:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2011-Dec-15 04:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2011-Dec-15 04:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.136 (still bad) 2011-Dec-15 04:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.137 (still bad) 2011-Dec-15 04:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-15 04:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.133 (still bad) 2011-Dec-15 04:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.135 (still bad) 2011-Dec-15 04:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.134 (still bad) 2011-Dec-15 04:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.135 (still bad) 2011-Dec-15 04:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-15 04:19:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-15 04:19:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.910 1.085 0.913 0.925 2011-Dec-15 04:19:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.911 0.994 1.059 1.118 2011-Dec-15 04:19:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.832 1.114 0.974 1.135 2011-Dec-15 04:19:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.024 0.995 0.025 2011-Dec-15 04:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2011-Dec-15 04:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-15 04:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-15 04:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2011-Dec-15 04:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-15 04:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.138 (still bad) 2011-Dec-15 04:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-15 04:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-15 04:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-15 04:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.135 (still bad) 2011-Dec-15 04:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.138 (still bad) 2011-Dec-15 04:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-15 04:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-15 04:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.134 (still bad) 2011-Dec-15 04:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-15 04:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.142 (still bad) 2011-Dec-15 04:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-15 04:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-15 04:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-15 04:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-15 04:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-15 04:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.143 (still bad) 2011-Dec-15 04:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-15 04:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-15 04:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-15 04:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-15 04:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-15 04:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.144 (still bad) 2011-Dec-15 04:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2011-Dec-15 04:20:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-15 04:20:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.911 1.087 0.914 0.926 2011-Dec-15 04:20:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.914 0.996 1.061 1.122 2011-Dec-15 04:20:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.830 1.116 0.974 1.138 2011-Dec-15 04:20:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.915 0.020 0.995 0.021 2011-Dec-15 04:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2011-Dec-15 04:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2011-Dec-15 04:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2011-Dec-15 04:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.144 (still bad) 2011-Dec-15 04:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-15 04:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-15 04:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.139 (still bad) 2011-Dec-15 04:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-15 04:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-15 04:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.145 (still bad) 2011-Dec-15 04:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.139 (still bad) 2011-Dec-15 04:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.139 (still bad) 2011-Dec-15 04:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.139 (still bad) 2011-Dec-15 04:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-15 04:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-15 04:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.144 (still bad) 2011-Dec-15 04:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-15 04:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-15 04:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-15 04:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.145 (still bad) 2011-Dec-15 04:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-15 04:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-15 04:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.140 (still bad) 2011-Dec-15 04:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-15 04:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-15 04:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.145 (still bad) 2011-Dec-15 04:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.139 (still bad) 2011-Dec-15 04:21:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-15 04:21:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.915 1.095 0.916 0.928 2011-Dec-15 04:21:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 0.997 1.065 1.122 2011-Dec-15 04:21:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.833 1.117 0.976 1.139 2011-Dec-15 04:21:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.916 0.022 0.998 0.023 2011-Dec-15 04:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.142 (still bad) 2011-Dec-15 04:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.143 (still bad) 2011-Dec-15 04:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.144 (still bad) 2011-Dec-15 04:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.146 (still bad) 2011-Dec-15 04:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.143 (still bad) 2011-Dec-15 04:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.143 (still bad) 2011-Dec-15 04:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.143 (still bad) 2011-Dec-15 04:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.142 (still bad) 2011-Dec-15 04:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.143 (still bad) 2011-Dec-15 04:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.142 (still bad) 2011-Dec-15 04:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.141 (still bad) 2011-Dec-15 04:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.141 (still bad) 2011-Dec-15 04:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.140 (still bad) 2011-Dec-15 04:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.139 (still bad) 2011-Dec-15 04:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2011-Dec-15 04:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.140 (still bad) 2011-Dec-15 04:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.140 (still bad) 2011-Dec-15 04:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.139 (still bad) 2011-Dec-15 04:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.140 (still bad) 2011-Dec-15 04:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.139 (still bad) 2011-Dec-15 04:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2011-Dec-15 04:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.140 (still bad) 2011-Dec-15 04:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-15 04:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-15 04:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-15 04:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.140 (still bad) 2011-Dec-15 04:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2011-Dec-15 04:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2011-Dec-15 04:22:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-15 04:22:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.915 1.092 0.917 0.930 2011-Dec-15 04:22:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.911 0.998 1.064 1.124 2011-Dec-15 04:22:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.833 1.119 0.977 1.137 2011-Dec-15 04:22:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.020 1.001 0.020 2011-Dec-15 04:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2011-Dec-15 04:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2011-Dec-15 04:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.139 (still bad) 2011-Dec-15 04:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.139 (still bad) 2011-Dec-15 04:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-15 04:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.139 (still bad) 2011-Dec-15 04:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-15 04:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-15 04:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-15 04:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-15 04:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.143 (still bad) 2011-Dec-15 04:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-15 04:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.143 (still bad) 2011-Dec-15 04:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-15 04:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-15 04:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-15 04:23:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-15 04:23:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.913 1.090 0.912 0.925 2011-Dec-15 04:23:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.911 0.996 1.062 1.121 2011-Dec-15 04:23:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.833 1.117 0.975 1.137 2011-Dec-15 04:23:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.916 0.022 0.999 0.023 2011-Dec-15 04:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.139 (still bad) 2011-Dec-15 04:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.143 (still bad) 2011-Dec-15 04:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-15 04:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-15 04:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-15 04:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-15 04:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-15 04:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.143 (still bad) 2011-Dec-15 04:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-15 04:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-15 04:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-15 04:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-15 04:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.144 (still bad) 2011-Dec-15 04:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-15 04:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-15 04:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-15 04:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-15 04:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-15 04:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.143 (still bad) 2011-Dec-15 04:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-15 04:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-15 04:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.144 (still bad) 2011-Dec-15 04:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-15 04:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-15 04:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-15 04:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-15 04:24:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-15 04:24:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.918 1.095 0.916 0.926 2011-Dec-15 04:24:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.910 0.995 1.062 1.120 2011-Dec-15 04:24:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.832 1.120 0.978 1.139 2011-Dec-15 04:24:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.916 0.025 0.998 0.025 2011-Dec-15 04:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.144 (still bad) 2011-Dec-15 04:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.140 (still bad) 2011-Dec-15 04:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.141 (still bad) 2011-Dec-15 04:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.140 (still bad) 2011-Dec-15 04:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2011-Dec-15 04:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2011-Dec-15 04:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.141 (still bad) 2011-Dec-15 04:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2011-Dec-15 04:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2011-Dec-15 04:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.139 (still bad) 2011-Dec-15 04:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2011-Dec-15 04:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.141 (still bad) 2011-Dec-15 04:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.144 (still bad) 2011-Dec-15 04:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-15 04:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-15 04:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-15 04:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.143 (still bad) 2011-Dec-15 04:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2011-Dec-15 04:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2011-Dec-15 04:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.140 (still bad) 2011-Dec-15 04:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2011-Dec-15 04:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.141 (still bad) 2011-Dec-15 04:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.139 (still bad) 2011-Dec-15 04:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-15 04:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-15 04:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-15 04:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-15 04:25:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-15 04:25:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.913 1.093 0.917 0.928 2011-Dec-15 04:25:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.909 0.995 1.063 1.122 2011-Dec-15 04:25:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.835 1.118 0.976 1.138 2011-Dec-15 04:25:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.915 0.022 0.998 0.023 2011-Dec-15 04:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2011-Dec-15 04:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2011-Dec-15 04:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2011-Dec-15 04:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2011-Dec-15 04:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2011-Dec-15 04:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2011-Dec-15 04:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-15 04:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-15 04:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-15 04:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-15 04:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-15 04:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.140 (still bad) 2011-Dec-15 04:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.140 (still bad) 2011-Dec-15 04:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.140 (still bad) 2011-Dec-15 04:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-15 04:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-15 04:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-15 04:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.139 (still bad) 2011-Dec-15 04:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-15 04:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.138 (still bad) 2011-Dec-15 04:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.138 (still bad) 2011-Dec-15 04:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.138 (still bad) 2011-Dec-15 04:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.138 (still bad) 2011-Dec-15 04:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.139 (still bad) 2011-Dec-15 04:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-15 04:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-15 04:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-15 04:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-15 04:26:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-15 04:26:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.911 1.088 0.917 0.926 2011-Dec-15 04:26:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.905 0.996 1.067 1.126 2011-Dec-15 04:26:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.837 1.122 0.979 1.142 2011-Dec-15 04:26:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.914 0.024 0.996 0.024 2011-Dec-15 04:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.135 (still bad) 2011-Dec-15 04:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.135 (still bad) 2011-Dec-15 04:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-15 04:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.135 (still bad) 2011-Dec-15 04:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-15 04:26:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-15 04:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-15 04:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-15 04:26:46 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-15 04:26:46 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-15 04:26:46 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-15 04:26:46 LOG5 end_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2011-Dec-15 04:26:46 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-15 04:26:46 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2011-Dec-15 04:26:46 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-15 04:26:46 LOG5 finish_task: Level: (2) ID = <10064> Status = 0 0 0 0 ok 2011-Dec-15 04:26:46 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-15 04:26:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-15 04:26:46 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-15 04:26:46 LOG5 end_task: Level: (2) ID = <10064> Status = 0 0 0 0 ok 2011-Dec-15 04:26:46 COMMAND run_command_line: EXECUTING command 20: 'ENDIF' 2011-Dec-15 04:26:46 COMMAND run_command_line: EXECUTING command 23: 'IF LSTSLEW(AGES3193_p3_151) < 093740 THEN' 2011-Dec-15 04:26:46 LOG3 is_if_valid: Current source data: up 608.6 4.9 UP - - 102 1.9 2011-Dec-15 04:26:46 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_151) < 093740 2011-Dec-15 04:26:46 INFO5 is_if_valid: Condition parsed as: 9.6039406666666665 < 9.6277777777777782 2011-Dec-15 04:26:46 COMMAND run_command_line: EXECUTING command 24: 'FIXEDDRIFT az=244.88 alfaangle=-43.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_151 ra=95300.00 dec=200800.00' 2011-Dec-15 04:26:46 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-15 04:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-15 04:26:47 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-15 04:26:47 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 244.88 -43.6 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_151 95300.00 200800.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-15 04:26:47 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-15 04:26:47 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2011-Dec-15 04:26:47 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_149' 2011-Dec-15 04:26:47 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-15 04:26:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_151} 2011-Dec-15 04:26:47 INFO3 fixed_driftmap: Sending telescope to Az = 244.88 and ZA = 4.15 2011-Dec-15 04:26:47 LOG3 track_source: Calling 'track_source AGES3193_p3_151 244.88 4.1503937707 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-15 04:26:47 START begin_task: Starting task 'sending tracking commands' 2011-Dec-15 04:26:47 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2011-Dec-15 04:26:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_151} INFO {Slewing to source 'AGES3193_p3_151' ...} 2011-Dec-15 04:26:47 INFO1 track_source: Starting to track AGES3193_p3_151 2011-Dec-15 04:26:47 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_151" 2011-Dec-15 04:26:47 LOG3 vw_send: To DATATAKING: set ra 244.88 2011-Dec-15 04:26:47 LOG3 vw_send: To DATATAKING: set dec 4.1503937707 2011-Dec-15 04:26:47 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-15 04:26:47 LOG3 vw_send: To DATATAKING: pnt tr 244.88 4.1503937707 -CF 2011-Dec-15 04:26:47 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 04:26:47 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-15 04:26:47 LOG5 finish_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2011-Dec-15 04:26:47 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-15 04:26:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 04:26:47 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-15 04:26:47 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2011-Dec-15 04:26:47 START begin_task: Starting task 'rotate ALFA to -43.6 degrees' 2011-Dec-15 04:26:47 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2011-Dec-15 04:26:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -43.6 degrees ...} 2011-Dec-15 04:26:47 INFO2 rotate_alfa: ALFA commanded to -43.6 degrees 2011-Dec-15 04:26:47 LOG3 sock_errsend: To ALFAMOTOR: POSITION -43.6 REPLY 2011-Dec-15 04:26:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-15 04:26:47 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-15 04:26:47 LOG5 begin_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2011-Dec-15 04:26:47 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_151" 2011-Dec-15 04:26:47 LOG4 got_cormsg: From DATATAKING: set ra 244.88 2011-Dec-15 04:26:47 LOG4 got_cormsg: From DATATAKING: set dec 4.1503937707 2011-Dec-15 04:26:47 LOG4 got_cormsg: From DATATAKING: vw% 244.88 2011-Dec-15 04:26:47 LOG4 got_cormsg: From DATATAKING: vw% 4.1503937707 2011-Dec-15 04:26:47 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:26:47 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-15 04:26:47 LOG4 got_cormsg: From DATATAKING: pnt tr 244.88 4.1503937707 -CF 2011-Dec-15 04:26:47 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 04:26:47 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-15 04:26:47 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:26:57 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-15 04:26:57 INFO3 alfa_motor: ALFA rotator in-position -43.60 degrees 2011-Dec-15 04:26:57 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-15 04:26:57 LOG5 end_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2011-Dec-15 04:26:57 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-15 04:26:57 STOP finish_task: Finishing task 'rotate ALFA to -43.6 degrees' 2011-Dec-15 04:26:57 LOG5 finish_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2011-Dec-15 04:26:57 INFO2 finish_task: DONE finished configuration: rotating ALFA to -43.6 degrees 2011-Dec-15 04:26:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 04:26:57 STOP end_task: Finishing task 'rotate ALFA to -43.6 degrees' with status 'OK' 2011-Dec-15 04:26:57 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2011-Dec-15 04:26:57 START begin_task: Starting task 'waiting on telescope' 2011-Dec-15 04:26:57 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2011-Dec-15 04:26:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-15 04:26:57 LOG3 waittrk: Start waittrk 5 2011-Dec-15 04:26:57 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-15 04:26:57 LOG5 begin_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2011-Dec-15 04:27:02 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-15 04:27:02 LOG5 end_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2011-Dec-15 04:27:02 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-15 04:27:02 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2011-Dec-15 04:29:06 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-15 04:29:06 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2011-Dec-15 04:29:06 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-15 04:29:06 INFO2 waittrk: Now tracking AGES3193_p3_151 2011-Dec-15 04:29:06 LOG4 waittrk: Current telescope position: Az = 604.07 ZA = 4.15 2011-Dec-15 04:29:06 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-15 04:29:06 LOG5 finish_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2011-Dec-15 04:29:06 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-15 04:29:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 04:29:06 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-15 04:29:06 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2011-Dec-15 04:29:06 START begin_task: Starting task 'selecting calibration type' 2011-Dec-15 04:29:06 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2011-Dec-15 04:29:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-15 04:29:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-15 04:29:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 04:29:06 START begin_task: Starting task 'waiting on setcal' 2011-Dec-15 04:29:06 LOG5 begin_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2011-Dec-15 04:29:06 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-15 04:29:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 04:29:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:29:07 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-15 04:29:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-15 04:29:07 LOG5 end_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2011-Dec-15 04:29:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-15 04:29:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-15 04:29:07 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-15 04:29:07 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-15 04:29:07 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2011-Dec-15 04:29:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:29:07 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-15 04:29:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-15 04:29:07 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2011-Dec-15 04:29:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-15 04:29:07 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-15 04:29:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-15 04:29:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-15 04:29:07 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-15 04:29:07 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2011-Dec-15 04:29:07 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-15 04:29:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-15 04:29:07 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2011-Dec-15 04:29:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-15 04:29:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-15 04:29:07 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-15 04:29:07 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2011-Dec-15 04:29:07 LOG5 dopset_later: Calling 'dopset_later 58.62666524983986' 2011-Dec-15 04:29:07 INFO3 dopset_later: Setting Doppler correction for 04:30:06 (58.6 seconds from now) 2011-Dec-15 04:29:07 LOG5 antvel: Calling 'antvel 244.880000 4.150394 F Heliocentric 58.62666524983986' 2011-Dec-15 04:29:07 LOG2 antvel: Transforming current Az = 244.88 ZA = 4.15 to apparent RA = 09:53:41.4 Dec = +20:04:23.3 2011-Dec-15 04:29:07 LOG2 antvel: Parameters to Doppler: Heliocentric 30606 2011 349 0.0 2011-Dec-15 04:29:07 INFO5 antvel: Computed antenna velocity: -26.13946 km/s 2011-Dec-15 04:29:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-26.1394637388 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-15 04:29:07 INFO4 dopset_gen: New sky frequencies: 1381.363872 1381.363872 1381.363872 1381.363872 1381.363872 1381.363872 1381.363872 1381.363872 1381.363872 2011-Dec-15 04:29:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.363872 sky0=1381.363872 sky1=1381.363872 sky2=1381.363872 sky3=1381.363872 sky4=1381.363872 sky5=1381.363872 sky6=1381.363872 sky7=1381.363872 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-15 04:29:07 LOG2 dopset_gen: Result from 'sky2syn': 1631.363872 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-15 04:29:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631363872.0} 2011-Dec-15 04:29:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 04:29:07 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-15 04:29:07 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-15 04:29:07 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:05.9 Dec = +20:07:46.8 2011-Dec-15 04:29:07 LOG3 track_source: Calling 'track_source AGES3193_p3_151 095205.9 200746.8 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-15 04:29:07 START begin_task: Starting task 'sending tracking commands' 2011-Dec-15 04:29:07 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2011-Dec-15 04:29:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_151} INFO {Slewing to source 'AGES3193_p3_151' ...} 2011-Dec-15 04:29:07 INFO1 track_source: Starting to track AGES3193_p3_151 2011-Dec-15 04:29:07 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_151" 2011-Dec-15 04:29:07 LOG3 vw_send: To DATATAKING: set ra 095205.9 2011-Dec-15 04:29:07 LOG3 vw_send: To DATATAKING: set dec 200746.8 2011-Dec-15 04:29:07 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-15 04:29:07 LOG3 vw_send: To DATATAKING: pnt tr 095205.9 200746.8 -CJ 2011-Dec-15 04:29:08 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 04:29:08 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-15 04:29:08 LOG5 finish_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2011-Dec-15 04:29:08 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-15 04:29:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 04:29:08 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-15 04:29:08 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2011-Dec-15 04:29:08 START begin_task: Starting task 'waiting on telescope' 2011-Dec-15 04:29:08 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2011-Dec-15 04:29:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-15 04:29:08 LOG3 waittrk: Start waittrk 5 2011-Dec-15 04:29:08 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-15 04:29:08 LOG5 begin_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2011-Dec-15 04:29:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631363872.0} 2011-Dec-15 04:29:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 04:29:08 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:29:08 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_151" 2011-Dec-15 04:29:08 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:29:08 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:29:08 LOG4 got_cormsg: From DATATAKING: set ra 095205.9 2011-Dec-15 04:29:08 LOG4 got_cormsg: From DATATAKING: set dec 200746.8 2011-Dec-15 04:29:08 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-15 04:29:08 LOG4 got_cormsg: From DATATAKING: pnt tr 095205.9 200746.8 -CJ 2011-Dec-15 04:29:08 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 04:29:08 LOG4 got_cormsg: From DATATAKING: 095205.9 2011-Dec-15 04:29:08 LOG4 got_cormsg: From DATATAKING: vw% 200746.8 2011-Dec-15 04:29:08 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2011-Dec-15 04:29:13 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-15 04:29:13 LOG5 end_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2011-Dec-15 04:29:13 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-15 04:29:13 LOG5 begin_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2011-Dec-15 04:29:19 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-15 04:29:19 LOG5 end_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2011-Dec-15 04:29:19 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-15 04:29:19 INFO2 waittrk: Now tracking AGES3193_p3_151 2011-Dec-15 04:29:19 LOG4 waittrk: Current telescope position: Az = 603.93 ZA = 4.12 2011-Dec-15 04:29:19 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-15 04:29:19 LOG5 finish_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2011-Dec-15 04:29:19 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-15 04:29:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 04:29:19 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-15 04:29:19 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2011-Dec-15 04:29:19 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-15 04:29:19 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2011-Dec-15 04:29:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-15 04:29:19 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-15 04:29:19 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-15 04:29:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-15 04:29:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 04:29:19 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-15 04:29:19 LOG5 begin_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2011-Dec-15 04:29:19 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-15 04:29:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 04:29:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:29:22 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-15 04:29:22 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-15 04:29:22 LOG5 end_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2011-Dec-15 04:29:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-15 04:29:22 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-15 04:29:22 LOG5 begin_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2011-Dec-15 04:29:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-15 04:29:22 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-15 04:29:22 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-15 04:29:22 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-15 04:29:22 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-15 04:29:22 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-15 04:29:22 LOG5 begin_task: Level: (5) ID = <10124> Status = 0 0 0 0 ok 2011-Dec-15 04:29:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-15 04:29:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:29:22 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 7 6 dB 2011-Dec-15 04:29:23 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 3 dB 2011-Dec-15 04:29:23 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 4 dB --- beam 3: 2 2 dB 2011-Dec-15 04:29:23 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2011-Dec-15 04:29:23 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-15 04:29:23 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-15 04:29:23 LOG5 end_task: Level: (5) ID = <10124> Status = 0 0 0 0 ok 2011-Dec-15 04:29:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.118 1.068 ALFA beam 1: 1.136 0.912 2011-Dec-15 04:29:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.106 0.986 ALFA beam 3: 1.060 1.111 2011-Dec-15 04:29:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.823 1.078 ALFA beam 5: 0.925 1.077 2011-Dec-15 04:29:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.100 0.014 ALFA beam 7: 0.956 0.014 2011-Dec-15 04:29:23 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-15 04:29:23 LOG5 finish_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2011-Dec-15 04:29:23 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-15 04:29:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 04:29:23 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-15 04:29:23 LOG5 end_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2011-Dec-15 04:29:23 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-15 04:29:23 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2011-Dec-15 04:29:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-15 04:29:23 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-15 04:29:23 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-15 04:29:23 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-15 04:29:23 LOG5 begin_task: Level: (5) ID = <10126> Status = 0 0 0 0 ok 2011-Dec-15 04:29:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-15 04:29:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.118 1.068 1.136 0.912 2011-Dec-15 04:29:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.106 0.986 1.060 1.111 2011-Dec-15 04:29:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.823 1.078 0.925 1.077 2011-Dec-15 04:29:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 0.014 0.956 0.014 2011-Dec-15 04:29:28 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.8 28.0 B 30.2 30.2 mn:A 0.1 -0.0 B -0.3 -0.3 gn: 11 11 2011-Dec-15 04:29:28 INFO3 from_mock: From MOCK: b0s1g0 rms:A 31.9 30.6 B 27.9 29.6 mn:A 0.1 -0.4 B -0.5 0.2 gn: 12 11 2011-Dec-15 04:29:28 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.4 28.5 B 32.8 28.8 mn:A 0.6 0.7 B 0.1 -0.1 gn: 7 11 2011-Dec-15 04:29:28 INFO3 from_mock: From MOCK: b1s1g0 rms:A 29.7 27.3 B 31.0 31.1 mn:A -0.4 -0.2 B 0.5 0.2 gn: 8 10 2011-Dec-15 04:29:28 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.8 30.8 B 28.2 29.6 mn:A 0.0 -0.4 B 0.3 -0.0 gn: 11 11 2011-Dec-15 04:29:28 INFO3 from_mock: From MOCK: b2s1g0 rms:A 28.9 29.1 B 32.7 30.4 mn:A 0.1 -0.2 B 0.1 0.2 gn: 11 12 2011-Dec-15 04:29:28 INFO3 from_mock: From MOCK: b3s0g0 rms:A 29.0 28.8 B 31.2 27.8 mn:A 0.4 -0.2 B -0.0 -0.3 gn: 12 12 2011-Dec-15 04:29:28 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.3 29.6 B 29.3 30.5 mn:A -0.3 0.3 B 0.1 0.2 gn: 12 12 2011-Dec-15 04:29:28 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.2 29.3 B 31.4 31.5 mn:A -0.2 -0.3 B -0.4 -0.1 gn: 13 12 2011-Dec-15 04:29:28 INFO3 from_mock: From MOCK: b4s1g0 rms:A 32.1 29.1 B 30.1 29.1 mn:A -0.0 0.0 B -0.4 0.2 gn: 16 13 2011-Dec-15 04:29:28 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.0 27.9 B 30.2 30.2 mn:A 0.3 0.4 B -0.1 0.4 gn: 12 11 2011-Dec-15 04:29:28 INFO3 from_mock: From MOCK: b5s1g0 rms:A 29.1 28.9 B 30.5 30.2 mn:A -0.4 0.2 B -0.1 0.2 gn: 12 11 2011-Dec-15 04:29:28 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.6 29.9 B 14.8 15.2 mn:A -0.4 0.1 B 0.4 -0.5 gn: 13 31 2011-Dec-15 04:29:29 INFO3 from_mock: From MOCK: b6s1g0 rms:A 33.1 30.1 B 11.8 11.4 mn:A 0.6 0.5 B 0.1 0.1 gn: 14 31 2011-Dec-15 04:29:29 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-15 04:29:29 LOG5 end_task: Level: (5) ID = <10126> Status = 0 0 0 0 ok 2011-Dec-15 04:29:29 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-15 04:29:29 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-15 04:29:29 LOG5 finish_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2011-Dec-15 04:29:29 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-15 04:29:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 04:29:29 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-15 04:29:29 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2011-Dec-15 04:29:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-15 04:29:29 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-15 04:29:29 LOG5 finish_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2011-Dec-15 04:29:29 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-15 04:29:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 04:29:29 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-15 04:29:29 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2011-Dec-15 04:29:29 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2011-Dec-15 04:29:29 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2011-Dec-15 04:29:29 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2011-Dec-15 04:29:29 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2011-Dec-15 04:29:29 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-15 04:29:29 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-15 04:29:29 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2011-Dec-15 04:29:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-15 04:29:29 START begin_task: Starting task 'selecting calibration type' 2011-Dec-15 04:29:29 LOG5 begin_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2011-Dec-15 04:29:29 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-15 04:29:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-15 04:29:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 04:29:29 START begin_task: Starting task 'waiting on setcal' 2011-Dec-15 04:29:29 LOG5 begin_task: Level: (5) ID = <10129> Status = 0 0 0 0 ok 2011-Dec-15 04:29:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2011-Dec-15 04:29:29 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-15 04:29:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 04:29:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:29:29 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-15 04:29:29 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-15 04:29:29 LOG5 end_task: Level: (5) ID = <10129> Status = 0 0 0 0 ok 2011-Dec-15 04:29:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-15 04:29:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-15 04:29:29 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-15 04:29:29 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-15 04:29:29 LOG5 begin_task: Level: (5) ID = <10130> Status = 0 0 0 0 ok 2011-Dec-15 04:29:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:29:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20111215.a2048.0003.fits 2011-Dec-15 04:29:30 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111215.a2048.0003.fits} 2011-Dec-15 04:29:30 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-15 04:29:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-15 04:29:30 LOG5 end_task: Level: (5) ID = <10130> Status = 0 0 0 0 ok 2011-Dec-15 04:29:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-15 04:29:30 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-15 04:29:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-15 04:29:30 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-15 04:29:30 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-15 04:29:30 LOG5 begin_task: Level: (5) ID = <10131> Status = 0 0 0 0 ok 2011-Dec-15 04:29:30 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-15 04:29:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-15 04:29:30 LOG5 end_task: Level: (5) ID = <10131> Status = 0 0 0 0 ok 2011-Dec-15 04:29:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-15 04:29:30 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-15 04:29:30 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-15 04:29:30 LOG5 end_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2011-Dec-15 04:29:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-15 04:29:30 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-15 04:29:30 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-15 04:29:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-15 04:29:30 LOG5 begin_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2011-Dec-15 04:29:31 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-15 04:29:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-15 04:29:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-15 04:29:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-15 04:29:31 LOG5 end_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2011-Dec-15 04:29:31 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-15 04:29:31 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-15 04:29:31 LOG5 begin_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2011-Dec-15 04:29:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-15 04:29:31 LOG5 log_alfabeam: Parameters: 9.8683055555555548 20.129666666666665 9.618233 2011.956022321089 -43.600060 2011-Dec-15 04:29:31 LOG4 log_alfabeam: ALFABEAM 0 9.868305555555542 20.129666666666676 2011-Dec-15 04:29:31 LOG4 log_alfabeam: ALFABEAM 1 9.868840395089750 20.037567688813631 2011-Dec-15 04:29:31 LOG4 log_alfabeam: ALFABEAM 2 9.874998572955981 20.098294210202496 2011-Dec-15 04:29:31 LOG4 log_alfabeam: ALFABEAM 3 9.874368543578528 20.192389806944838 2011-Dec-15 04:29:31 LOG4 log_alfabeam: ALFABEAM 4 9.867610433001222 20.222168335564206 2011-Dec-15 04:29:31 LOG4 log_alfabeam: ALFABEAM 5 9.861610252466649 20.158368684139869 2011-Dec-15 04:29:31 LOG4 log_alfabeam: ALFABEAM 6 9.862208206772543 20.067844132425005 2011-Dec-15 04:29:31 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-15 04:29:31 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-15 04:29:31 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-15 04:29:31 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_151 2011-Dec-15 04:29:31 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-15 04:29:31 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-15 04:29:31 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-15 04:29:31 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-15 04:29:31 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-15 04:29:31 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-15 04:29:31 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-15 04:29:31 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-15 04:29:31 LOG3 take_mock_data: PSET configuration: patternid=134900006 2011-Dec-15 04:29:31 LOG3 take_mock_data: PSET configuration: scanid=134900007 2011-Dec-15 04:29:31 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-15 04:29:31 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-15 04:29:31 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-15 04:29:31 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456363872.0 2011-Dec-15 04:29:31 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306363872.0 2011-Dec-15 04:29:31 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-15 04:29:31 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-15 04:29:31 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_151:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=134900006:scanid=134900007:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456363872.0:topobfreqhz=1306363872.0:filetype=1 2011-Dec-15 04:29:31 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-15 04:29:31 LOG5 begin_task: Level: (5) ID = <10134> Status = 0 0 0 0 ok 2011-Dec-15 04:29:31 LOG4 from_mock: From MOCK: psetok 2011-Dec-15 04:29:31 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-15 04:29:31 LOG5 end_task: Level: (5) ID = <10134> Status = 0 0 0 0 ok 2011-Dec-15 04:29:31 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-15 04:29:31 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-15 04:29:31 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-15 04:29:31 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-15 04:29:31 LOG5 begin_task: Level: (5) ID = <10135> Status = 0 0 0 0 ok 2011-Dec-15 04:29:31 LOG4 from_mock: From MOCK: starok 2011-Dec-15 04:29:31 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-15 04:29:31 LOG5 end_task: Level: (5) ID = <10135> Status = 0 0 0 0 ok 2011-Dec-15 04:29:31 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-15 04:29:31 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134900007 2011-Dec-15 04:29:31 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-15 04:29:31 LOG5 begin_task: Level: (5) ID = <10136> Status = 0 0 0 0 ok 2011-Dec-15 04:29:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-15 04:29:31 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-15 04:29:31 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-15 04:29:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-15 04:29:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30572.00 2011-Dec-15 04:29:33 INFO2 got_mock_message: Mock spectrometer start file number is 00600 2011-Dec-15 04:29:33 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-15 04:29:33 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-15 04:29:33 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-15 04:29:33 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-15 04:29:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-15 04:29:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-15 04:29:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-15 04:29:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-15 04:29:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-15 04:29:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-15 04:29:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-15 04:29:33 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-15 04:29:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:29:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:29:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:29:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:29:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:29:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:29:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:29:36 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:29:36.01 2011-Dec-15 04:29:36 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323937776.01 Thu Dec 15 04:29:36 2011 2011-Dec-15 04:29:36 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-15 04:29:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.363872 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-15 04:29:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.363872 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 04:29:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.363872 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 04:29:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.363872 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-15 04:29:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.363872 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 04:29:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.363872 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 04:29:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.363872 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 04:29:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.363872 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-15 04:29:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.363872 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-15 04:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.527 (still bad) 2011-Dec-15 04:29:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-15 04:29:41 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-15 04:29:42 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-15 04:29:42 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-15 04:29:42 LOG5 end_task: Level: (5) ID = <10136> Status = 0 0 0 0 ok 2011-Dec-15 04:29:42 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-15 04:29:42 LOG5 end_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2011-Dec-15 04:29:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-15 04:29:42 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-15 04:29:42 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-15 04:29:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-15 04:29:42 LOG5 begin_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2011-Dec-15 04:29:42 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-15 04:29:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-15 04:29:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-15 04:29:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-15 04:29:42 LOG5 end_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2011-Dec-15 04:29:42 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-15 04:29:42 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-15 04:29:42 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2011-Dec-15 04:29:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-15 04:29:42 LOG5 log_alfabeam: Parameters: 9.8683055555555548 20.129666666666665 9.621297 2011.9560226696581 -43.600060 2011-Dec-15 04:29:42 LOG4 log_alfabeam: ALFABEAM 0 9.868305555555548 20.129666666666669 2011-Dec-15 04:29:42 LOG4 log_alfabeam: ALFABEAM 1 9.868870089128578 20.037605906129379 2011-Dec-15 04:29:42 LOG4 log_alfabeam: ALFABEAM 2 9.875008885418382 20.098721295007529 2011-Dec-15 04:29:42 LOG4 log_alfabeam: ALFABEAM 3 9.874347516179093 20.192791881467816 2011-Dec-15 04:29:42 LOG4 log_alfabeam: ALFABEAM 4 9.867579012393159 20.222123419942584 2011-Dec-15 04:29:42 LOG4 log_alfabeam: ALFABEAM 5 9.861600850452927 20.157915962044129 2011-Dec-15 04:29:42 LOG4 log_alfabeam: ALFABEAM 6 9.862228549453960 20.067449018041700 2011-Dec-15 04:29:42 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-15 04:29:42 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-15 04:29:42 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-15 04:29:42 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_151 2011-Dec-15 04:29:42 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-15 04:29:42 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-15 04:29:42 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-15 04:29:42 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-15 04:29:42 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-15 04:29:42 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-15 04:29:42 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-15 04:29:42 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-15 04:29:42 LOG3 take_mock_data: PSET configuration: patternid=134900006 2011-Dec-15 04:29:42 LOG3 take_mock_data: PSET configuration: scanid=134900008 2011-Dec-15 04:29:42 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-15 04:29:42 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-15 04:29:42 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-15 04:29:42 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456363872.0 2011-Dec-15 04:29:42 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306363872.0 2011-Dec-15 04:29:42 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-15 04:29:42 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-15 04:29:42 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_151:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=134900006:scanid=134900008:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456363872.0:topobfreqhz=1306363872.0:filetype=1 2011-Dec-15 04:29:42 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-15 04:29:42 LOG5 begin_task: Level: (5) ID = <10139> Status = 0 0 0 0 ok 2011-Dec-15 04:29:42 LOG4 from_mock: From MOCK: psetok 2011-Dec-15 04:29:42 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-15 04:29:42 LOG5 end_task: Level: (5) ID = <10139> Status = 0 0 0 0 ok 2011-Dec-15 04:29:42 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-15 04:29:42 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-15 04:29:42 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-15 04:29:42 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-15 04:29:42 LOG5 begin_task: Level: (5) ID = <10140> Status = 0 0 0 0 ok 2011-Dec-15 04:29:42 LOG4 from_mock: From MOCK: starok 2011-Dec-15 04:29:42 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-15 04:29:42 LOG5 end_task: Level: (5) ID = <10140> Status = 0 0 0 0 ok 2011-Dec-15 04:29:42 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-15 04:29:42 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134900008 2011-Dec-15 04:29:42 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-15 04:29:42 LOG5 begin_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2011-Dec-15 04:29:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-15 04:29:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-15 04:29:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30583.00 2011-Dec-15 04:29:43 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-15 04:29:43 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-15 04:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.554 (still bad) 2011-Dec-15 04:29:45 INFO2 got_mock_message: Mock spectrometer start file number is 00700 2011-Dec-15 04:29:45 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-15 04:29:45 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-15 04:29:45 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-15 04:29:45 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-15 04:29:45 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-15 04:29:45 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-15 04:29:45 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-15 04:29:45 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-15 04:29:45 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-15 04:29:45 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-15 04:29:45 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-15 04:29:45 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-15 04:29:45 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:29:45 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:29:45 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:29:45 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:29:45 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:29:45 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:29:45 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:29:48 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:29:48.01 2011-Dec-15 04:29:48 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323937788.01 Thu Dec 15 04:29:48 2011 2011-Dec-15 04:29:48 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-15 04:29:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.363872 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-15 04:29:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.363872 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 04:29:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.363872 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 04:29:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.363872 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-15 04:29:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.363872 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 04:29:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.363872 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 04:29:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.363872 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 04:29:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.363872 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-15 04:29:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.363872 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-15 04:29:48 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-15 04:29:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-15 04:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-15 04:29:53 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-15 04:29:54 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-15 04:29:54 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-15 04:29:54 LOG5 end_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2011-Dec-15 04:29:54 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-15 04:29:54 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2011-Dec-15 04:29:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-15 04:29:54 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-15 04:29:54 LOG5 finish_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2011-Dec-15 04:29:54 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-15 04:29:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 04:29:54 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-15 04:29:54 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2011-Dec-15 04:29:54 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-15 04:29:54 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 244.88 and ZA = 4.15 2011-Dec-15 04:29:54 LOG3 track_source: Calling 'track_source AGES3193_p3_151 244.88 4.1503937707 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-15 04:29:54 START begin_task: Starting task 'sending tracking commands' 2011-Dec-15 04:29:54 LOG5 begin_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2011-Dec-15 04:29:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_151} INFO {Slewing to source 'AGES3193_p3_151' ...} 2011-Dec-15 04:29:54 INFO1 track_source: Starting to track AGES3193_p3_151 2011-Dec-15 04:29:54 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_151" 2011-Dec-15 04:29:54 LOG3 vw_send: To DATATAKING: set ra 244.88 2011-Dec-15 04:29:54 LOG3 vw_send: To DATATAKING: set dec 4.1503937707 2011-Dec-15 04:29:54 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-15 04:29:54 LOG3 vw_send: To DATATAKING: pnt tr 244.88 4.1503937707 -CF 2011-Dec-15 04:29:54 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 04:29:54 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-15 04:29:54 LOG5 finish_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2011-Dec-15 04:29:54 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-15 04:29:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 04:29:54 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-15 04:29:54 LOG5 end_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2011-Dec-15 04:29:54 LOG1 fixed_driftmap: Parameters: HA = -00:16:00.2 Start = 09:37:41.4 LST = 09:37:28.7 diff = 12.7 secs 2011-Dec-15 04:29:54 INFO2 fixed_driftmap: Waiting 10.7 seconds for RA 9:53:42 2011-Dec-15 04:29:54 INFO2 lstwait: Waiting for 10.6 secs from LST 09:37:29 to LST 09:37:39 ... 2011-Dec-15 04:29:54 LOG4 send_obs_status: To obs_status: <1> TASKTIME 10.634860835118591 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-15 04:29:54 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-15 04:29:54 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2011-Dec-15 04:29:54 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_151" 2011-Dec-15 04:29:54 LOG4 got_cormsg: From DATATAKING: set ra 244.88 2011-Dec-15 04:29:54 LOG4 got_cormsg: From DATATAKING: set dec 4.1503937707 2011-Dec-15 04:29:54 LOG4 got_cormsg: From DATATAKING: vw% 244.88 2011-Dec-15 04:29:54 LOG4 got_cormsg: From DATATAKING: vw% 4.1503937707 2011-Dec-15 04:29:54 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:29:54 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-15 04:29:54 LOG4 got_cormsg: From DATATAKING: pnt tr 244.88 4.1503937707 -CF 2011-Dec-15 04:29:54 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 04:29:54 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-15 04:29:54 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-15 04:30:05 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-15 04:30:05 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2011-Dec-15 04:30:05 LOG4 lstwait: Finished waiting 0.37 seconds late 2011-Dec-15 04:30:05 INFO3 lstwait: Finished waiting 2011-Dec-15 04:30:05 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-15 04:30:05 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-15 04:30:05 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-15 04:30:05 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-15 04:30:05 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-15 04:30:05 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-15 04:30:05 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2011-Dec-15 04:30:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-15 04:30:05 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-15 04:30:05 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-15 04:30:05 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-15 04:30:05 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-15 04:30:05 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_151 2011-Dec-15 04:30:05 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-15 04:30:05 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-15 04:30:05 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-15 04:30:05 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-15 04:30:05 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-15 04:30:05 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-15 04:30:05 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-15 04:30:05 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-15 04:30:05 LOG3 take_mock_data: PSET configuration: patternid=134900009 2011-Dec-15 04:30:05 LOG3 take_mock_data: PSET configuration: scanid=134900009 2011-Dec-15 04:30:05 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-15 04:30:05 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-15 04:30:05 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-15 04:30:05 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456363872.0 2011-Dec-15 04:30:05 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306363872.0 2011-Dec-15 04:30:05 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-15 04:30:05 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-15 04:30:05 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_151:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=134900009:scanid=134900009:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456363872.0:topobfreqhz=1306363872.0:filetype=1 2011-Dec-15 04:30:05 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-15 04:30:05 LOG5 begin_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2011-Dec-15 04:30:05 LOG4 from_mock: From MOCK: psetok 2011-Dec-15 04:30:05 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-15 04:30:05 LOG5 end_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2011-Dec-15 04:30:05 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-15 04:30:05 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-15 04:30:05 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-15 04:30:05 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-15 04:30:05 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2011-Dec-15 04:30:05 LOG4 from_mock: From MOCK: starok 2011-Dec-15 04:30:05 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-15 04:30:05 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2011-Dec-15 04:30:05 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-15 04:30:05 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 134900009 2011-Dec-15 04:30:05 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-15 04:30:05 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2011-Dec-15 04:30:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-15 04:30:05 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-15 04:30:05 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-15 04:30:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-15 04:30:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30606.00 2011-Dec-15 04:30:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.363872 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-15 04:30:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.363872 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 04:30:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.363872 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 04:30:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.363872 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-15 04:30:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.363872 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 04:30:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.363872 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 04:30:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.363872 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 04:30:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.363872 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-15 04:30:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.363872 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-15 04:30:07 INFO2 got_mock_message: Mock spectrometer start file number is 00800 2011-Dec-15 04:30:07 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-15 04:30:07 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1199.9 s 2011-Dec-15 04:30:07 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-15 04:30:07 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-15 04:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-15 04:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-15 04:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-15 04:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-15 04:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-15 04:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-15 04:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-15 04:30:07 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-15 04:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 04:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 04:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 04:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 04:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 04:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 04:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 04:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2011-Dec-15 04:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.139 (still bad) 2011-Dec-15 04:30:10 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:30:10.02 2011-Dec-15 04:30:10 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323937810.02 Thu Dec 15 04:30:10 2011 2011-Dec-15 04:30:10 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-15 04:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-15 04:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.140 (still bad) 2011-Dec-15 04:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-15 04:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.140 (still bad) 2011-Dec-15 04:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-15 04:30:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-15 04:30:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.123 1.069 1.143 0.915 2011-Dec-15 04:30:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.118 0.990 1.059 1.111 2011-Dec-15 04:30:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.823 1.081 0.926 1.073 2011-Dec-15 04:30:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 0.025 0.958 0.025 2011-Dec-15 04:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-15 04:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.140 (still bad) 2011-Dec-15 04:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-15 04:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.139 (still bad) 2011-Dec-15 04:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-15 04:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-15 04:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.140 (still bad) 2011-Dec-15 04:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-15 04:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-15 04:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-15 04:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-15 04:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-15 04:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-15 04:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-15 04:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2011-Dec-15 04:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-15 04:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.134 (still bad) 2011-Dec-15 04:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2011-Dec-15 04:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-15 04:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-15 04:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.135 (still bad) 2011-Dec-15 04:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-15 04:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.135 (still bad) 2011-Dec-15 04:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.134 (still bad) 2011-Dec-15 04:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.138 (still bad) 2011-Dec-15 04:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-15 04:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-15 04:31:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-15 04:31:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.116 1.063 1.137 0.911 2011-Dec-15 04:31:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 0.989 1.058 1.109 2011-Dec-15 04:31:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.822 1.076 0.925 1.073 2011-Dec-15 04:31:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.094 0.023 0.953 0.024 2011-Dec-15 04:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-15 04:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-15 04:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-15 04:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-15 04:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-15 04:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-15 04:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-15 04:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-15 04:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-15 04:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-15 04:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-15 04:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.141 (still bad) 2011-Dec-15 04:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-15 04:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-15 04:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-15 04:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-15 04:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-15 04:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-15 04:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-15 04:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.145 (still bad) 2011-Dec-15 04:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-15 04:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-15 04:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-15 04:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-15 04:32:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-15 04:32:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.115 1.061 1.137 0.910 2011-Dec-15 04:32:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.120 0.989 1.056 1.109 2011-Dec-15 04:32:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.824 1.079 0.926 1.074 2011-Dec-15 04:32:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 0.023 0.955 0.024 2011-Dec-15 04:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.144 (still bad) 2011-Dec-15 04:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.138 (still bad) 2011-Dec-15 04:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.135 (still bad) 2011-Dec-15 04:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.138 (still bad) 2011-Dec-15 04:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.134 (still bad) 2011-Dec-15 04:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-15 04:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.145 (still bad) 2011-Dec-15 04:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-15 04:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2011-Dec-15 04:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.140 (still bad) 2011-Dec-15 04:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-15 04:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-15 04:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.141 (still bad) 2011-Dec-15 04:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.135 (still bad) 2011-Dec-15 04:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.135 (still bad) 2011-Dec-15 04:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.139 (still bad) 2011-Dec-15 04:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-15 04:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.139 (still bad) 2011-Dec-15 04:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.145 (still bad) 2011-Dec-15 04:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-15 04:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-15 04:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-15 04:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-15 04:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-15 04:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.146 (still bad) 2011-Dec-15 04:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-15 04:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-15 04:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.140 (still bad) 2011-Dec-15 04:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-15 04:33:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-15 04:33:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.116 1.062 1.139 0.913 2011-Dec-15 04:33:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.115 0.985 1.058 1.110 2011-Dec-15 04:33:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.826 1.086 0.922 1.072 2011-Dec-15 04:33:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.094 0.023 0.953 0.023 2011-Dec-15 04:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.150 (still bad) 2011-Dec-15 04:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.143 (still bad) 2011-Dec-15 04:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.145 (still bad) 2011-Dec-15 04:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.150 (still bad) 2011-Dec-15 04:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.152 (still bad) 2011-Dec-15 04:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.154 (still bad) 2011-Dec-15 04:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.156 (still bad) 2011-Dec-15 04:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.152 (still bad) 2011-Dec-15 04:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.150 (still bad) 2011-Dec-15 04:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.146 (still bad) 2011-Dec-15 04:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.143 (still bad) 2011-Dec-15 04:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.141 (still bad) 2011-Dec-15 04:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.140 (still bad) 2011-Dec-15 04:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.134 (still bad) 2011-Dec-15 04:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.134 (still bad) 2011-Dec-15 04:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-15 04:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.132 (still bad) 2011-Dec-15 04:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-15 04:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-15 04:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.134 (still bad) 2011-Dec-15 04:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2011-Dec-15 04:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-15 04:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2011-Dec-15 04:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2011-Dec-15 04:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-15 04:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-15 04:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-15 04:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-15 04:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-15 04:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-15 04:34:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-15 04:34:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.122 1.071 1.140 0.912 2011-Dec-15 04:34:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.120 0.994 1.060 1.112 2011-Dec-15 04:34:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.823 1.081 0.928 1.074 2011-Dec-15 04:34:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 0.025 0.957 0.025 2011-Dec-15 04:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.134 (still bad) 2011-Dec-15 04:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-15 04:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-15 04:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-15 04:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-15 04:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.138 (still bad) 2011-Dec-15 04:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.135 (still bad) 2011-Dec-15 04:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-15 04:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.138 (still bad) 2011-Dec-15 04:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.138 (still bad) 2011-Dec-15 04:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.138 (still bad) 2011-Dec-15 04:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.142 (still bad) 2011-Dec-15 04:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-15 04:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.140 (still bad) 2011-Dec-15 04:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.142 (still bad) 2011-Dec-15 04:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.141 (still bad) 2011-Dec-15 04:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.143 (still bad) 2011-Dec-15 04:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.147 (still bad) 2011-Dec-15 04:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2011-Dec-15 04:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.140 (still bad) 2011-Dec-15 04:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2011-Dec-15 04:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2011-Dec-15 04:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.144 (still bad) 2011-Dec-15 04:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.145 (still bad) 2011-Dec-15 04:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.143 (still bad) 2011-Dec-15 04:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.145 (still bad) 2011-Dec-15 04:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.140 (still bad) 2011-Dec-15 04:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.141 (still bad) 2011-Dec-15 04:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.143 (still bad) 2011-Dec-15 04:35:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-15 04:35:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.119 1.067 1.141 0.912 2011-Dec-15 04:35:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.114 0.992 1.064 1.118 2011-Dec-15 04:35:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.826 1.083 0.925 1.075 2011-Dec-15 04:35:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.099 0.022 0.956 0.022 2011-Dec-15 04:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.139 (still bad) 2011-Dec-15 04:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.140 (still bad) 2011-Dec-15 04:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.140 (still bad) 2011-Dec-15 04:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.140 (still bad) 2011-Dec-15 04:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.145 (still bad) 2011-Dec-15 04:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.139 (still bad) 2011-Dec-15 04:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.138 (still bad) 2011-Dec-15 04:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.141 (still bad) 2011-Dec-15 04:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.138 (still bad) 2011-Dec-15 04:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-15 04:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.142 (still bad) 2011-Dec-15 04:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.140 (still bad) 2011-Dec-15 04:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-15 04:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.140 (still bad) 2011-Dec-15 04:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.139 (still bad) 2011-Dec-15 04:36:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.139 (still bad) 2011-Dec-15 04:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2011-Dec-15 04:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-15 04:36:11 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 2-3 errors 2011-Dec-15 04:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-15 04:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-15 04:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-15 04:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-15 04:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-15 04:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.141 (still bad) 2011-Dec-15 04:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-15 04:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.140 (still bad) 2011-Dec-15 04:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-15 04:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2011-Dec-15 04:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2011-Dec-15 04:36:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-15 04:36:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.122 1.072 1.139 0.911 2011-Dec-15 04:36:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.101 0.986 1.059 1.111 2011-Dec-15 04:36:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.826 1.080 0.926 1.073 2011-Dec-15 04:36:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 0.025 0.955 0.026 2011-Dec-15 04:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-15 04:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-15 04:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-15 04:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-15 04:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-15 04:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-15 04:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-15 04:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-15 04:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.134 (still bad) 2011-Dec-15 04:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2011-Dec-15 04:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-15 04:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-15 04:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-15 04:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-15 04:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-15 04:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-15 04:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.144 (still bad) 2011-Dec-15 04:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-15 04:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-15 04:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-15 04:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.140 (still bad) 2011-Dec-15 04:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.140 (still bad) 2011-Dec-15 04:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.147 (still bad) 2011-Dec-15 04:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-15 04:37:23 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 16-31 errors 2011-Dec-15 04:37:23 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 4-7 errors 2011-Dec-15 04:37:23 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 16-31 errors 2011-Dec-15 04:37:23 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 16-31 errors 2011-Dec-15 04:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-15 04:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-15 04:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.150 (still bad) 2011-Dec-15 04:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.165 (still bad) 2011-Dec-15 04:37:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-15 04:37:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.122 1.071 1.167 0.932 2011-Dec-15 04:37:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.095 0.987 1.060 1.112 2011-Dec-15 04:37:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.826 1.083 0.927 1.074 2011-Dec-15 04:37:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 0.025 0.956 0.025 2011-Dec-15 04:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.175 (still bad) 2011-Dec-15 04:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.185 (still bad) 2011-Dec-15 04:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.187 (still bad) 2011-Dec-15 04:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.187 (still bad) 2011-Dec-15 04:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.191 (still bad) 2011-Dec-15 04:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.175 (still bad) 2011-Dec-15 04:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.163 (still bad) 2011-Dec-15 04:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.158 (still bad) 2011-Dec-15 04:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.146 (still bad) 2011-Dec-15 04:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.140 (still bad) 2011-Dec-15 04:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.146 (still bad) 2011-Dec-15 04:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.138 (still bad) 2011-Dec-15 04:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.137 (still bad) 2011-Dec-15 04:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.140 (still bad) 2011-Dec-15 04:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.144 (still bad) 2011-Dec-15 04:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.147 (still bad) 2011-Dec-15 04:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.152 (still bad) 2011-Dec-15 04:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-15 04:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-15 04:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-15 04:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-15 04:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-15 04:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.145 (still bad) 2011-Dec-15 04:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.139 (still bad) 2011-Dec-15 04:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.138 (still bad) 2011-Dec-15 04:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.141 (still bad) 2011-Dec-15 04:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.137 (still bad) 2011-Dec-15 04:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.138 (still bad) 2011-Dec-15 04:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.147 (still bad) 2011-Dec-15 04:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.139 (still bad) 2011-Dec-15 04:38:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-15 04:38:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.118 1.066 1.138 0.912 2011-Dec-15 04:38:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.132 0.991 1.063 1.115 2011-Dec-15 04:38:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.826 1.082 0.927 1.076 2011-Dec-15 04:38:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 0.024 0.956 0.024 2011-Dec-15 04:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.140 (still bad) 2011-Dec-15 04:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-15 04:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-15 04:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.139 (still bad) 2011-Dec-15 04:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-15 04:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.139 (still bad) 2011-Dec-15 04:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.138 (still bad) 2011-Dec-15 04:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.138 (still bad) 2011-Dec-15 04:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.140 (still bad) 2011-Dec-15 04:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.140 (still bad) 2011-Dec-15 04:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-15 04:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.140 (still bad) 2011-Dec-15 04:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.140 (still bad) 2011-Dec-15 04:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-15 04:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2011-Dec-15 04:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.140 (still bad) 2011-Dec-15 04:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.141 (still bad) 2011-Dec-15 04:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.140 (still bad) 2011-Dec-15 04:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.139 (still bad) 2011-Dec-15 04:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2011-Dec-15 04:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-15 04:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-15 04:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-15 04:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.143 (still bad) 2011-Dec-15 04:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.143 (still bad) 2011-Dec-15 04:39:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-15 04:39:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.115 1.063 1.142 0.915 2011-Dec-15 04:39:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.133 0.991 1.063 1.116 2011-Dec-15 04:39:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.828 1.086 0.930 1.077 2011-Dec-15 04:39:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 0.023 0.956 0.024 2011-Dec-15 04:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.141 (still bad) 2011-Dec-15 04:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.140 (still bad) 2011-Dec-15 04:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.141 (still bad) 2011-Dec-15 04:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.143 (still bad) 2011-Dec-15 04:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.142 (still bad) 2011-Dec-15 04:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.140 (still bad) 2011-Dec-15 04:39:52 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.141 (still bad) 2011-Dec-15 04:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.141 (still bad) 2011-Dec-15 04:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.143 (still bad) 2011-Dec-15 04:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.145 (still bad) 2011-Dec-15 04:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2011-Dec-15 04:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2011-Dec-15 04:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.145 (still bad) 2011-Dec-15 04:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.143 (still bad) 2011-Dec-15 04:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.143 (still bad) 2011-Dec-15 04:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-15 04:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-15 04:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.144 (still bad) 2011-Dec-15 04:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.142 (still bad) 2011-Dec-15 04:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.142 (still bad) 2011-Dec-15 04:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.146 (still bad) 2011-Dec-15 04:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.141 (still bad) 2011-Dec-15 04:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.143 (still bad) 2011-Dec-15 04:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.150 (still bad) 2011-Dec-15 04:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-15 04:40:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-15 04:40:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.116 1.067 1.143 0.915 2011-Dec-15 04:40:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.136 0.993 1.064 1.114 2011-Dec-15 04:40:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.085 0.929 1.077 2011-Dec-15 04:40:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 0.025 0.959 0.025 2011-Dec-15 04:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.145 (still bad) 2011-Dec-15 04:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2011-Dec-15 04:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2011-Dec-15 04:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2011-Dec-15 04:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2011-Dec-15 04:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.143 (still bad) 2011-Dec-15 04:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.145 (still bad) 2011-Dec-15 04:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.144 (still bad) 2011-Dec-15 04:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.143 (still bad) 2011-Dec-15 04:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.144 (still bad) 2011-Dec-15 04:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.145 (still bad) 2011-Dec-15 04:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.144 (still bad) 2011-Dec-15 04:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.145 (still bad) 2011-Dec-15 04:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.145 (still bad) 2011-Dec-15 04:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.144 (still bad) 2011-Dec-15 04:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.145 (still bad) 2011-Dec-15 04:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.142 (still bad) 2011-Dec-15 04:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.140 (still bad) 2011-Dec-15 04:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.143 (still bad) 2011-Dec-15 04:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2011-Dec-15 04:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.143 (still bad) 2011-Dec-15 04:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2011-Dec-15 04:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.143 (still bad) 2011-Dec-15 04:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2011-Dec-15 04:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2011-Dec-15 04:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.144 (still bad) 2011-Dec-15 04:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.144 (still bad) 2011-Dec-15 04:41:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-15 04:41:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.115 1.065 1.142 0.912 2011-Dec-15 04:41:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.133 0.989 1.062 1.113 2011-Dec-15 04:41:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.827 1.082 0.930 1.076 2011-Dec-15 04:41:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 0.025 0.957 0.025 2011-Dec-15 04:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-15 04:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.140 (still bad) 2011-Dec-15 04:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-15 04:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.140 (still bad) 2011-Dec-15 04:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.144 (still bad) 2011-Dec-15 04:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.140 (still bad) 2011-Dec-15 04:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.144 (still bad) 2011-Dec-15 04:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.142 (still bad) 2011-Dec-15 04:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.143 (still bad) 2011-Dec-15 04:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.149 (still bad) 2011-Dec-15 04:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-15 04:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.146 (still bad) 2011-Dec-15 04:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.148 (still bad) 2011-Dec-15 04:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.142 (still bad) 2011-Dec-15 04:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.141 (still bad) 2011-Dec-15 04:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.141 (still bad) 2011-Dec-15 04:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.139 (still bad) 2011-Dec-15 04:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.138 (still bad) 2011-Dec-15 04:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.144 (still bad) 2011-Dec-15 04:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.140 (still bad) 2011-Dec-15 04:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.138 (still bad) 2011-Dec-15 04:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.142 (still bad) 2011-Dec-15 04:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.137 (still bad) 2011-Dec-15 04:42:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-15 04:42:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.116 1.066 1.140 0.912 2011-Dec-15 04:42:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.132 0.989 1.062 1.114 2011-Dec-15 04:42:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.826 1.081 0.928 1.075 2011-Dec-15 04:42:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 0.026 0.955 0.026 2011-Dec-15 04:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.143 (still bad) 2011-Dec-15 04:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.140 (still bad) 2011-Dec-15 04:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.137 (still bad) 2011-Dec-15 04:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.142 (still bad) 2011-Dec-15 04:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.139 (still bad) 2011-Dec-15 04:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.138 (still bad) 2011-Dec-15 04:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.144 (still bad) 2011-Dec-15 04:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-15 04:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-15 04:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-15 04:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-15 04:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-15 04:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-15 04:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-15 04:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.142 (still bad) 2011-Dec-15 04:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.139 (still bad) 2011-Dec-15 04:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.140 (still bad) 2011-Dec-15 04:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.142 (still bad) 2011-Dec-15 04:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.140 (still bad) 2011-Dec-15 04:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.142 (still bad) 2011-Dec-15 04:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.146 (still bad) 2011-Dec-15 04:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.145 (still bad) 2011-Dec-15 04:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.145 (still bad) 2011-Dec-15 04:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:43:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-15 04:43:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.120 1.067 1.144 0.915 2011-Dec-15 04:43:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.130 0.987 1.061 1.114 2011-Dec-15 04:43:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.826 1.080 0.928 1.075 2011-Dec-15 04:43:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 0.025 0.955 0.025 2011-Dec-15 04:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.148 (still bad) 2011-Dec-15 04:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-15 04:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-15 04:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-15 04:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.146 (still bad) 2011-Dec-15 04:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.140 (still bad) 2011-Dec-15 04:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.139 (still bad) 2011-Dec-15 04:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2011-Dec-15 04:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.139 (still bad) 2011-Dec-15 04:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.141 (still bad) 2011-Dec-15 04:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.148 (still bad) 2011-Dec-15 04:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-15 04:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-15 04:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.140 (still bad) 2011-Dec-15 04:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.146 (still bad) 2011-Dec-15 04:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-15 04:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-15 04:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.144 (still bad) 2011-Dec-15 04:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.140 (still bad) 2011-Dec-15 04:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-15 04:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.145 (still bad) 2011-Dec-15 04:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-15 04:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-15 04:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.140 (still bad) 2011-Dec-15 04:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:44:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-15 04:44:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.126 1.078 1.148 0.921 2011-Dec-15 04:44:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.141 0.995 1.068 1.123 2011-Dec-15 04:44:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.833 1.094 0.936 1.081 2011-Dec-15 04:44:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 0.025 0.960 0.025 2011-Dec-15 04:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-15 04:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.140 (still bad) 2011-Dec-15 04:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-15 04:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.140 (still bad) 2011-Dec-15 04:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.147 (still bad) 2011-Dec-15 04:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-15 04:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.140 (still bad) 2011-Dec-15 04:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.144 (still bad) 2011-Dec-15 04:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-15 04:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.150 (still bad) 2011-Dec-15 04:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.143 (still bad) 2011-Dec-15 04:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.142 (still bad) 2011-Dec-15 04:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.146 (still bad) 2011-Dec-15 04:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.144 (still bad) 2011-Dec-15 04:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.150 (still bad) 2011-Dec-15 04:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.148 (still bad) 2011-Dec-15 04:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.149 (still bad) 2011-Dec-15 04:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.150 (still bad) 2011-Dec-15 04:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.146 (still bad) 2011-Dec-15 04:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.146 (still bad) 2011-Dec-15 04:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.145 (still bad) 2011-Dec-15 04:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.146 (still bad) 2011-Dec-15 04:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-15 04:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.144 (still bad) 2011-Dec-15 04:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.144 (still bad) 2011-Dec-15 04:45:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-15 04:45:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.120 1.070 1.143 0.915 2011-Dec-15 04:45:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.135 0.989 1.063 1.116 2011-Dec-15 04:45:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.085 0.928 1.078 2011-Dec-15 04:45:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 0.025 0.958 0.025 2011-Dec-15 04:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-15 04:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.145 (still bad) 2011-Dec-15 04:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.145 (still bad) 2011-Dec-15 04:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.144 (still bad) 2011-Dec-15 04:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.147 (still bad) 2011-Dec-15 04:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.147 (still bad) 2011-Dec-15 04:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.148 (still bad) 2011-Dec-15 04:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.150 (still bad) 2011-Dec-15 04:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.149 (still bad) 2011-Dec-15 04:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.146 (still bad) 2011-Dec-15 04:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.147 (still bad) 2011-Dec-15 04:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.144 (still bad) 2011-Dec-15 04:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.146 (still bad) 2011-Dec-15 04:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.146 (still bad) 2011-Dec-15 04:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.145 (still bad) 2011-Dec-15 04:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2011-Dec-15 04:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2011-Dec-15 04:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.143 (still bad) 2011-Dec-15 04:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.143 (still bad) 2011-Dec-15 04:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.143 (still bad) 2011-Dec-15 04:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.140 (still bad) 2011-Dec-15 04:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:46:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-15 04:46:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.117 1.070 1.142 0.916 2011-Dec-15 04:46:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.133 0.992 1.064 1.118 2011-Dec-15 04:46:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.084 0.927 1.079 2011-Dec-15 04:46:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 0.025 0.957 0.025 2011-Dec-15 04:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.144 (still bad) 2011-Dec-15 04:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.143 (still bad) 2011-Dec-15 04:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.143 (still bad) 2011-Dec-15 04:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.140 (still bad) 2011-Dec-15 04:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.141 (still bad) 2011-Dec-15 04:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.138 (still bad) 2011-Dec-15 04:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.141 (still bad) 2011-Dec-15 04:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.148 (still bad) 2011-Dec-15 04:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-15 04:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.145 (still bad) 2011-Dec-15 04:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-15 04:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.144 (still bad) 2011-Dec-15 04:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.150 (still bad) 2011-Dec-15 04:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-15 04:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.146 (still bad) 2011-Dec-15 04:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.144 (still bad) 2011-Dec-15 04:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.144 (still bad) 2011-Dec-15 04:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.152 (still bad) 2011-Dec-15 04:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.145 (still bad) 2011-Dec-15 04:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.142 (still bad) 2011-Dec-15 04:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.143 (still bad) 2011-Dec-15 04:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.143 (still bad) 2011-Dec-15 04:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.144 (still bad) 2011-Dec-15 04:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.152 (still bad) 2011-Dec-15 04:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.145 (still bad) 2011-Dec-15 04:47:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-15 04:47:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.122 1.071 1.141 0.916 2011-Dec-15 04:47:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.133 0.994 1.064 1.119 2011-Dec-15 04:47:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.084 0.941 1.090 2011-Dec-15 04:47:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.099 0.025 0.957 0.025 2011-Dec-15 04:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.144 (still bad) 2011-Dec-15 04:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.145 (still bad) 2011-Dec-15 04:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.151 (still bad) 2011-Dec-15 04:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.144 (still bad) 2011-Dec-15 04:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.145 (still bad) 2011-Dec-15 04:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.152 (still bad) 2011-Dec-15 04:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.147 (still bad) 2011-Dec-15 04:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.144 (still bad) 2011-Dec-15 04:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.148 (still bad) 2011-Dec-15 04:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.147 (still bad) 2011-Dec-15 04:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.148 (still bad) 2011-Dec-15 04:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.154 (still bad) 2011-Dec-15 04:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.146 (still bad) 2011-Dec-15 04:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.147 (still bad) 2011-Dec-15 04:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.149 (still bad) 2011-Dec-15 04:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.146 (still bad) 2011-Dec-15 04:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.146 (still bad) 2011-Dec-15 04:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.151 (still bad) 2011-Dec-15 04:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-15 04:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.145 (still bad) 2011-Dec-15 04:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.145 (still bad) 2011-Dec-15 04:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.143 (still bad) 2011-Dec-15 04:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.144 (still bad) 2011-Dec-15 04:48:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-15 04:48:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.118 1.071 1.143 0.916 2011-Dec-15 04:48:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.136 0.994 1.064 1.117 2011-Dec-15 04:48:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.830 1.085 0.931 1.079 2011-Dec-15 04:48:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.102 0.024 0.959 0.024 2011-Dec-15 04:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.141 (still bad) 2011-Dec-15 04:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2011-Dec-15 04:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.144 (still bad) 2011-Dec-15 04:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.144 (still bad) 2011-Dec-15 04:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.145 (still bad) 2011-Dec-15 04:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.144 (still bad) 2011-Dec-15 04:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.145 (still bad) 2011-Dec-15 04:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.144 (still bad) 2011-Dec-15 04:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.142 (still bad) 2011-Dec-15 04:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.141 (still bad) 2011-Dec-15 04:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.143 (still bad) 2011-Dec-15 04:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.145 (still bad) 2011-Dec-15 04:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.145 (still bad) 2011-Dec-15 04:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-15 04:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.144 (still bad) 2011-Dec-15 04:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.147 (still bad) 2011-Dec-15 04:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.146 (still bad) 2011-Dec-15 04:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.145 (still bad) 2011-Dec-15 04:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:49:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-15 04:49:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.119 1.072 1.145 0.916 2011-Dec-15 04:49:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.133 0.989 1.064 1.116 2011-Dec-15 04:49:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.082 0.932 1.078 2011-Dec-15 04:49:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.099 0.025 0.958 0.026 2011-Dec-15 04:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-15 04:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-15 04:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.145 (still bad) 2011-Dec-15 04:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.142 (still bad) 2011-Dec-15 04:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.142 (still bad) 2011-Dec-15 04:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.143 (still bad) 2011-Dec-15 04:50:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-15 04:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.141 (still bad) 2011-Dec-15 04:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.141 (still bad) 2011-Dec-15 04:50:11 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-15 04:50:11 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-15 04:50:11 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-15 04:50:11 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2011-Dec-15 04:50:11 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-15 04:50:11 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2011-Dec-15 04:50:11 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-15 04:50:11 LOG5 finish_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2011-Dec-15 04:50:11 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-15 04:50:11 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-15 04:50:11 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-15 04:50:11 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2011-Dec-15 04:50:11 COMMAND run_command_line: EXECUTING command 27: 'ENDIF' 2011-Dec-15 04:50:11 COMMAND run_command_line: EXECUTING command 30: 'IF LSTSLEW(AGES3193_p3_153) < 100340 THEN' 2011-Dec-15 04:50:11 LOG3 is_if_valid: Current source data: up 509.7 1.9 UP - - 79 3.9 2011-Dec-15 04:50:11 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_153) < 100340 2011-Dec-15 04:50:11 INFO5 is_if_valid: Condition parsed as: 10.02862 < 10.061111111111112 2011-Dec-15 04:50:11 COMMAND run_command_line: EXECUTING command 31: 'FIXEDDRIFT az=125.67 alfaangle=70.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_153 ra=95300.00 dec=200500.00' 2011-Dec-15 04:50:11 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-15 04:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.141 (still bad) 2011-Dec-15 04:50:12 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-15 04:50:12 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 125.67 70.0 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_153 95300.00 200500.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-15 04:50:12 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-15 04:50:12 LOG5 begin_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2011-Dec-15 04:50:12 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_151' 2011-Dec-15 04:50:12 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-15 04:50:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_153} 2011-Dec-15 04:50:12 INFO3 fixed_driftmap: Sending telescope to Az = 125.67 and ZA = 2.89 2011-Dec-15 04:50:12 LOG3 track_source: Calling 'track_source AGES3193_p3_153 125.67 2.8912686388 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-15 04:50:12 START begin_task: Starting task 'sending tracking commands' 2011-Dec-15 04:50:12 LOG5 begin_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2011-Dec-15 04:50:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_153} INFO {Slewing to source 'AGES3193_p3_153' ...} 2011-Dec-15 04:50:12 INFO1 track_source: Starting to track AGES3193_p3_153 2011-Dec-15 04:50:12 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_153" 2011-Dec-15 04:50:12 LOG3 vw_send: To DATATAKING: set ra 125.67 2011-Dec-15 04:50:12 LOG3 vw_send: To DATATAKING: set dec 2.8912686388 2011-Dec-15 04:50:12 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-15 04:50:12 LOG3 vw_send: To DATATAKING: pnt tr 125.67 2.8912686388 -CF 2011-Dec-15 04:50:12 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 04:50:12 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-15 04:50:12 LOG5 finish_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2011-Dec-15 04:50:12 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-15 04:50:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 04:50:12 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-15 04:50:12 LOG5 end_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2011-Dec-15 04:50:12 START begin_task: Starting task 'rotate ALFA to +70 degrees' 2011-Dec-15 04:50:12 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2011-Dec-15 04:50:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +70 degrees ...} 2011-Dec-15 04:50:12 INFO2 rotate_alfa: ALFA commanded to +70.0 degrees 2011-Dec-15 04:50:12 LOG3 sock_errsend: To ALFAMOTOR: POSITION 70.0 REPLY 2011-Dec-15 04:50:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-15 04:50:12 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-15 04:50:12 LOG5 begin_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2011-Dec-15 04:50:12 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_153" 2011-Dec-15 04:50:12 LOG4 got_cormsg: From DATATAKING: set ra 125.67 2011-Dec-15 04:50:12 LOG4 got_cormsg: From DATATAKING: set dec 2.8912686388 2011-Dec-15 04:50:12 LOG4 got_cormsg: From DATATAKING: vw% 125.67 2011-Dec-15 04:50:12 LOG4 got_cormsg: From DATATAKING: vw% 2.8912686388 2011-Dec-15 04:50:12 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:50:12 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-15 04:50:12 LOG4 got_cormsg: From DATATAKING: pnt tr 125.67 2.8912686388 -CF 2011-Dec-15 04:50:12 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 04:50:12 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-15 04:50:12 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:51:16 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-15 04:51:16 INFO3 alfa_motor: ALFA rotator in-position +70.00 degrees 2011-Dec-15 04:51:16 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-15 04:51:16 LOG5 end_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2011-Dec-15 04:51:16 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-15 04:51:16 STOP finish_task: Finishing task 'rotate ALFA to +70 degrees' 2011-Dec-15 04:51:16 LOG5 finish_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2011-Dec-15 04:51:16 INFO2 finish_task: DONE finished configuration: rotating ALFA to +70 degrees 2011-Dec-15 04:51:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 04:51:16 STOP end_task: Finishing task 'rotate ALFA to +70 degrees' with status 'OK' 2011-Dec-15 04:51:16 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2011-Dec-15 04:51:16 START begin_task: Starting task 'waiting on telescope' 2011-Dec-15 04:51:16 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2011-Dec-15 04:51:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-15 04:51:16 LOG3 waittrk: Start waittrk 5 2011-Dec-15 04:51:16 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-15 04:51:16 LOG5 begin_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2011-Dec-15 04:51:21 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-15 04:51:21 LOG5 end_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2011-Dec-15 04:51:21 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-15 04:51:21 LOG5 begin_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2011-Dec-15 04:55:08 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-15 04:55:08 LOG5 end_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2011-Dec-15 04:55:08 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-15 04:55:08 INFO2 waittrk: Now tracking AGES3193_p3_153 2011-Dec-15 04:55:08 LOG4 waittrk: Current telescope position: Az = 485.42 ZA = 2.89 2011-Dec-15 04:55:08 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-15 04:55:08 LOG5 finish_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2011-Dec-15 04:55:08 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-15 04:55:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 04:55:08 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-15 04:55:08 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2011-Dec-15 04:55:08 START begin_task: Starting task 'selecting calibration type' 2011-Dec-15 04:55:08 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2011-Dec-15 04:55:09 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-15 04:55:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-15 04:55:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 04:55:09 START begin_task: Starting task 'waiting on setcal' 2011-Dec-15 04:55:09 LOG5 begin_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2011-Dec-15 04:55:09 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-15 04:55:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 04:55:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:55:09 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-15 04:55:09 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-15 04:55:09 LOG5 end_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2011-Dec-15 04:55:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-15 04:55:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-15 04:55:09 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-15 04:55:09 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-15 04:55:09 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2011-Dec-15 04:55:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:55:10 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-15 04:55:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-15 04:55:10 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2011-Dec-15 04:55:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-15 04:55:10 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-15 04:55:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-15 04:55:10 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-15 04:55:10 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-15 04:55:10 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2011-Dec-15 04:55:10 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-15 04:55:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-15 04:55:10 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2011-Dec-15 04:55:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-15 04:55:10 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-15 04:55:10 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-15 04:55:10 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2011-Dec-15 04:55:10 LOG5 dopset_later: Calling 'dopset_later 52.437384250624596' 2011-Dec-15 04:55:10 INFO3 dopset_later: Setting Doppler correction for 04:56:01 (52.4 seconds from now) 2011-Dec-15 04:55:10 LOG5 antvel: Calling 'antvel 125.670000 2.891269 F Heliocentric 52.437384250624596' 2011-Dec-15 04:55:10 LOG2 antvel: Transforming current Az = 125.67 ZA = 2.89 to apparent RA = 09:53:41.4 Dec = +20:01:23.3 2011-Dec-15 04:55:10 LOG2 antvel: Parameters to Doppler: Heliocentric 32161 2011 349 0.0 2011-Dec-15 04:55:10 INFO5 antvel: Computed antenna velocity: -26.09490 km/s 2011-Dec-15 04:55:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-26.094901718999999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-15 04:55:10 INFO4 dopset_gen: New sky frequencies: 1381.363667 1381.363667 1381.363667 1381.363667 1381.363667 1381.363667 1381.363667 1381.363667 1381.363667 2011-Dec-15 04:55:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.363667 sky0=1381.363667 sky1=1381.363667 sky2=1381.363667 sky3=1381.363667 sky4=1381.363667 sky5=1381.363667 sky6=1381.363667 sky7=1381.363667 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-15 04:55:10 LOG2 dopset_gen: Result from 'sky2syn': 1631.363667 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-15 04:55:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631363667.0} 2011-Dec-15 04:55:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 04:55:10 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-15 04:55:10 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-15 04:55:10 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:12.1 Dec = +20:04:46.8 2011-Dec-15 04:55:10 LOG3 track_source: Calling 'track_source AGES3193_p3_153 095212.1 200446.8 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-15 04:55:10 START begin_task: Starting task 'sending tracking commands' 2011-Dec-15 04:55:10 LOG5 begin_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2011-Dec-15 04:55:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_153} INFO {Slewing to source 'AGES3193_p3_153' ...} 2011-Dec-15 04:55:10 INFO1 track_source: Starting to track AGES3193_p3_153 2011-Dec-15 04:55:10 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_153" 2011-Dec-15 04:55:10 LOG3 vw_send: To DATATAKING: set ra 095212.1 2011-Dec-15 04:55:10 LOG3 vw_send: To DATATAKING: set dec 200446.8 2011-Dec-15 04:55:10 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-15 04:55:10 LOG3 vw_send: To DATATAKING: pnt tr 095212.1 200446.8 -CJ 2011-Dec-15 04:55:10 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 04:55:10 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-15 04:55:10 LOG5 finish_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2011-Dec-15 04:55:10 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-15 04:55:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 04:55:10 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-15 04:55:10 LOG5 end_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2011-Dec-15 04:55:10 START begin_task: Starting task 'waiting on telescope' 2011-Dec-15 04:55:10 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2011-Dec-15 04:55:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-15 04:55:10 LOG3 waittrk: Start waittrk 5 2011-Dec-15 04:55:10 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-15 04:55:10 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2011-Dec-15 04:55:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631363667.0} 2011-Dec-15 04:55:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 04:55:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:55:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_153" 2011-Dec-15 04:55:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:55:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:55:10 LOG4 got_cormsg: From DATATAKING: set ra 095212.1 2011-Dec-15 04:55:10 LOG4 got_cormsg: From DATATAKING: set dec 200446.8 2011-Dec-15 04:55:10 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-15 04:55:10 LOG4 got_cormsg: From DATATAKING: pnt tr 095212.1 200446.8 -CJ 2011-Dec-15 04:55:10 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 04:55:10 LOG4 got_cormsg: From DATATAKING: 095212.1 2011-Dec-15 04:55:10 LOG4 got_cormsg: From DATATAKING: vw% 200446.8 2011-Dec-15 04:55:10 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2011-Dec-15 04:55:15 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-15 04:55:15 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2011-Dec-15 04:55:15 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-15 04:55:15 LOG5 begin_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2011-Dec-15 04:55:20 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-15 04:55:20 LOG5 end_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2011-Dec-15 04:55:20 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-15 04:55:20 INFO2 waittrk: Now tracking AGES3193_p3_153 2011-Dec-15 04:55:20 LOG4 waittrk: Current telescope position: Az = 485.05 ZA = 2.91 2011-Dec-15 04:55:20 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-15 04:55:20 LOG5 finish_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2011-Dec-15 04:55:20 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-15 04:55:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 04:55:20 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-15 04:55:20 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2011-Dec-15 04:55:20 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-15 04:55:20 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2011-Dec-15 04:55:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-15 04:55:21 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-15 04:55:21 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-15 04:55:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-15 04:55:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 04:55:21 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-15 04:55:21 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2011-Dec-15 04:55:21 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-15 04:55:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 04:55:23 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:55:24 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-15 04:55:24 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-15 04:55:24 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2011-Dec-15 04:55:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-15 04:55:24 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-15 04:55:24 LOG5 begin_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2011-Dec-15 04:55:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-15 04:55:24 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-15 04:55:24 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-15 04:55:24 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-15 04:55:24 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-15 04:55:24 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-15 04:55:24 LOG5 begin_task: Level: (5) ID = <10166> Status = 0 0 0 0 ok 2011-Dec-15 04:55:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-15 04:55:24 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:55:24 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 7 6 dB 2011-Dec-15 04:55:24 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 3 dB 2011-Dec-15 04:55:24 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 2 dB 2011-Dec-15 04:55:24 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2011-Dec-15 04:55:24 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-15 04:55:24 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-15 04:55:24 LOG5 end_task: Level: (5) ID = <10166> Status = 0 0 0 0 ok 2011-Dec-15 04:55:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.097 1.078 ALFA beam 1: 1.108 0.925 2011-Dec-15 04:55:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.896 0.965 ALFA beam 3: 1.061 1.085 2011-Dec-15 04:55:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.837 1.079 ALFA beam 5: 0.924 1.099 2011-Dec-15 04:55:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.052 0.014 ALFA beam 7: 0.917 0.014 2011-Dec-15 04:55:24 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-15 04:55:24 LOG5 finish_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2011-Dec-15 04:55:24 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-15 04:55:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 04:55:24 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-15 04:55:24 LOG5 end_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2011-Dec-15 04:55:24 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-15 04:55:24 LOG5 begin_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2011-Dec-15 04:55:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-15 04:55:24 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-15 04:55:24 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-15 04:55:24 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-15 04:55:24 LOG5 begin_task: Level: (5) ID = <10168> Status = 0 0 0 0 ok 2011-Dec-15 04:55:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-15 04:55:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.097 1.078 1.108 0.925 2011-Dec-15 04:55:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.896 0.965 1.061 1.085 2011-Dec-15 04:55:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.837 1.079 0.924 1.099 2011-Dec-15 04:55:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.052 0.014 0.917 0.014 2011-Dec-15 04:55:30 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.4 27.6 B 30.4 30.5 mn:A 0.1 0.0 B -0.2 -0.2 gn: 11 11 2011-Dec-15 04:55:30 INFO3 from_mock: From MOCK: b0s1g0 rms:A 32.8 31.3 B 28.4 30.1 mn:A 0.2 -0.4 B -0.5 0.1 gn: 12 11 2011-Dec-15 04:55:30 INFO3 from_mock: From MOCK: b1s0g0 rms:A 29.9 28.0 B 33.1 29.0 mn:A 0.5 0.6 B 0.1 -0.1 gn: 7 11 2011-Dec-15 04:55:30 INFO3 from_mock: From MOCK: b1s1g0 rms:A 31.0 28.6 B 31.6 31.6 mn:A -0.4 -0.2 B 0.5 0.2 gn: 8 10 2011-Dec-15 04:55:30 INFO3 from_mock: From MOCK: b2s0g0 rms:A 32.0 31.0 B 28.1 29.4 mn:A 0.1 -0.3 B 0.4 0.1 gn: 11 11 2011-Dec-15 04:55:30 INFO3 from_mock: From MOCK: b2s1g0 rms:A 30.1 30.4 B 32.9 30.5 mn:A 0.1 -0.4 B 0.1 0.1 gn: 11 12 2011-Dec-15 04:55:30 INFO3 from_mock: From MOCK: b3s0g0 rms:A 29.1 28.9 B 30.9 27.5 mn:A 0.4 -0.2 B -0.0 -0.3 gn: 12 12 2011-Dec-15 04:55:30 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.6 29.9 B 29.8 31.1 mn:A -0.3 0.3 B 0.1 0.1 gn: 12 12 2011-Dec-15 04:55:30 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.4 29.5 B 31.2 31.4 mn:A -0.2 -0.3 B -0.4 -0.1 gn: 13 12 2011-Dec-15 04:55:30 INFO3 from_mock: From MOCK: b4s1g0 rms:A 32.7 29.6 B 30.2 29.2 mn:A -0.0 0.0 B -0.4 0.2 gn: 16 13 2011-Dec-15 04:55:30 INFO3 from_mock: From MOCK: b5s0g0 rms:A 32.3 31.1 B 30.5 30.5 mn:A 0.5 0.3 B -0.0 0.5 gn: 13 11 2011-Dec-15 04:55:30 INFO3 from_mock: From MOCK: b5s1g0 rms:A 29.8 29.6 B 31.0 30.8 mn:A -0.4 0.3 B -0.0 0.2 gn: 12 11 2011-Dec-15 04:55:30 INFO3 from_mock: From MOCK: b6s0g0 rms:A 31.9 29.2 B 15.3 15.8 mn:A -0.5 0.3 B 0.3 -0.5 gn: 13 31 2011-Dec-15 04:55:30 INFO3 from_mock: From MOCK: b6s1g0 rms:A 34.1 31.1 B 12.3 12.0 mn:A 0.6 0.5 B 0.1 0.1 gn: 14 31 2011-Dec-15 04:55:30 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-15 04:55:30 LOG5 end_task: Level: (5) ID = <10168> Status = 0 0 0 0 ok 2011-Dec-15 04:55:30 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-15 04:55:30 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-15 04:55:30 LOG5 finish_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2011-Dec-15 04:55:30 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-15 04:55:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 04:55:30 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-15 04:55:30 LOG5 end_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2011-Dec-15 04:55:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-15 04:55:30 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-15 04:55:30 LOG5 finish_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2011-Dec-15 04:55:30 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-15 04:55:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 04:55:30 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-15 04:55:30 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2011-Dec-15 04:55:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2011-Dec-15 04:55:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2011-Dec-15 04:55:31 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2011-Dec-15 04:55:31 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2011-Dec-15 04:55:31 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-15 04:55:31 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-15 04:55:31 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2011-Dec-15 04:55:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-15 04:55:31 START begin_task: Starting task 'selecting calibration type' 2011-Dec-15 04:55:31 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2011-Dec-15 04:55:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-15 04:55:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-15 04:55:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 04:55:31 START begin_task: Starting task 'waiting on setcal' 2011-Dec-15 04:55:31 LOG5 begin_task: Level: (5) ID = <10171> Status = 0 0 0 0 ok 2011-Dec-15 04:55:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2011-Dec-15 04:55:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-15 04:55:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 04:55:31 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:55:31 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-15 04:55:31 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-15 04:55:31 LOG5 end_task: Level: (5) ID = <10171> Status = 0 0 0 0 ok 2011-Dec-15 04:55:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-15 04:55:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-15 04:55:31 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-15 04:55:31 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-15 04:55:31 LOG5 begin_task: Level: (5) ID = <10172> Status = 0 0 0 0 ok 2011-Dec-15 04:55:31 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:55:31 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-15 04:55:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-15 04:55:31 LOG5 end_task: Level: (5) ID = <10172> Status = 0 0 0 0 ok 2011-Dec-15 04:55:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-15 04:55:31 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-15 04:55:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-15 04:55:31 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-15 04:55:31 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-15 04:55:31 LOG5 begin_task: Level: (5) ID = <10173> Status = 0 0 0 0 ok 2011-Dec-15 04:55:31 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-15 04:55:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-15 04:55:31 LOG5 end_task: Level: (5) ID = <10173> Status = 0 0 0 0 ok 2011-Dec-15 04:55:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-15 04:55:31 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-15 04:55:31 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-15 04:55:31 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2011-Dec-15 04:55:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-15 04:55:31 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-15 04:55:31 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-15 04:55:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-15 04:55:31 LOG5 begin_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2011-Dec-15 04:55:31 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-15 04:55:31 NOTE WAPPDATA-new_file: New FITS file: wapp.20111215.a2048.0004.fits 2011-Dec-15 04:55:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-15 04:55:31 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111215.a2048.0004.fits} 2011-Dec-15 04:55:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-15 04:55:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-15 04:55:31 LOG5 end_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2011-Dec-15 04:55:31 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-15 04:55:31 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-15 04:55:31 LOG5 begin_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2011-Dec-15 04:55:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-15 04:55:31 LOG5 log_alfabeam: Parameters: 9.8700277777777803 20.079666666666665 10.053031 2011.9560717861941 69.999916 2011-Dec-15 04:55:31 LOG4 log_alfabeam: ALFABEAM 0 9.870027777777791 20.079666666666675 2011-Dec-15 04:55:31 LOG4 log_alfabeam: ALFABEAM 1 9.872605549502332 19.986318966788588 2011-Dec-15 04:55:31 LOG4 log_alfabeam: ALFABEAM 2 9.877134610587801 20.048606703704991 2011-Dec-15 04:55:31 LOG4 log_alfabeam: ALFABEAM 3 9.874746548492567 20.142730299842398 2011-Dec-15 04:55:31 LOG4 log_alfabeam: ALFABEAM 4 9.867644597015607 20.175048797082383 2011-Dec-15 04:55:31 LOG4 log_alfabeam: ALFABEAM 5 9.862853598631917 20.108718432520256 2011-Dec-15 04:55:31 LOG4 log_alfabeam: ALFABEAM 6 9.865429509395636 20.014108392016158 2011-Dec-15 04:55:31 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-15 04:55:32 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-15 04:55:32 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-15 04:55:32 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_153 2011-Dec-15 04:55:32 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-15 04:55:32 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-15 04:55:32 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-15 04:55:32 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-15 04:55:32 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-15 04:55:32 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-15 04:55:32 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-15 04:55:32 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-15 04:55:32 LOG3 take_mock_data: PSET configuration: patternid=134900009 2011-Dec-15 04:55:32 LOG3 take_mock_data: PSET configuration: scanid=134900010 2011-Dec-15 04:55:32 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-15 04:55:32 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-15 04:55:32 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-15 04:55:32 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456363667.0 2011-Dec-15 04:55:32 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306363667.0 2011-Dec-15 04:55:32 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-15 04:55:32 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-15 04:55:32 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_153:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=134900009:scanid=134900010:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456363667.0:topobfreqhz=1306363667.0:filetype=1 2011-Dec-15 04:55:32 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-15 04:55:32 LOG5 begin_task: Level: (5) ID = <10176> Status = 0 0 0 0 ok 2011-Dec-15 04:55:32 LOG4 from_mock: From MOCK: psetok 2011-Dec-15 04:55:32 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-15 04:55:32 LOG5 end_task: Level: (5) ID = <10176> Status = 0 0 0 0 ok 2011-Dec-15 04:55:32 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-15 04:55:32 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-15 04:55:32 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-15 04:55:32 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-15 04:55:32 LOG5 begin_task: Level: (5) ID = <10177> Status = 0 0 0 0 ok 2011-Dec-15 04:55:32 LOG4 from_mock: From MOCK: starok 2011-Dec-15 04:55:32 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-15 04:55:32 LOG5 end_task: Level: (5) ID = <10177> Status = 0 0 0 0 ok 2011-Dec-15 04:55:32 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-15 04:55:32 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134900010 2011-Dec-15 04:55:32 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-15 04:55:32 LOG5 begin_task: Level: (5) ID = <10178> Status = 0 0 0 0 ok 2011-Dec-15 04:55:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-15 04:55:32 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-15 04:55:32 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-15 04:55:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-15 04:55:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32133.00 2011-Dec-15 04:55:34 INFO2 got_mock_message: Mock spectrometer start file number is 00900 2011-Dec-15 04:55:34 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-15 04:55:34 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-15 04:55:34 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-15 04:55:34 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-15 04:55:34 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-15 04:55:34 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-15 04:55:34 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-15 04:55:34 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-15 04:55:34 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-15 04:55:34 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-15 04:55:34 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-15 04:55:34 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-15 04:55:34 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:55:34 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:55:34 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:55:34 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:55:34 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:55:34 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:55:34 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:55:37 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:55:37.01 2011-Dec-15 04:55:37 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323939337.01 Thu Dec 15 04:55:37 2011 2011-Dec-15 04:55:37 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-15 04:55:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.363667 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-15 04:55:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.363667 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 04:55:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.363667 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 04:55:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.363667 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-15 04:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.536 (still bad) 2011-Dec-15 04:55:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.363667 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 04:55:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.363667 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 04:55:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.363667 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 04:55:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.363667 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-15 04:55:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.363667 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-15 04:55:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-15 04:55:43 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-15 04:55:43 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-15 04:55:43 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-15 04:55:43 LOG5 end_task: Level: (5) ID = <10178> Status = 0 0 0 0 ok 2011-Dec-15 04:55:43 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-15 04:55:43 LOG5 end_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2011-Dec-15 04:55:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-15 04:55:43 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-15 04:55:43 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-15 04:55:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-15 04:55:43 LOG5 begin_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2011-Dec-15 04:55:43 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-15 04:55:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-15 04:55:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-15 04:55:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-15 04:55:43 LOG5 end_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2011-Dec-15 04:55:43 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-15 04:55:43 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-15 04:55:43 LOG5 begin_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2011-Dec-15 04:55:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-15 04:55:43 LOG5 log_alfabeam: Parameters: 9.8700277777777803 20.079666666666665 10.056095 2011.956072134763 69.999916 2011-Dec-15 04:55:43 LOG4 log_alfabeam: ALFABEAM 0 9.870027777777798 20.079666666666665 2011-Dec-15 04:55:43 LOG4 log_alfabeam: ALFABEAM 1 9.872659556811501 19.986612537586261 2011-Dec-15 04:55:43 LOG4 log_alfabeam: ALFABEAM 2 9.877153165836592 20.049454916967669 2011-Dec-15 04:55:43 LOG4 log_alfabeam: ALFABEAM 3 9.874708339955248 20.143297755360543 2011-Dec-15 04:55:43 LOG4 log_alfabeam: ALFABEAM 4 9.867586952739380 20.174753175919307 2011-Dec-15 04:55:43 LOG4 log_alfabeam: ALFABEAM 5 9.862837030428219 20.107885853656363 2011-Dec-15 04:55:43 LOG4 log_alfabeam: ALFABEAM 6 9.865467754402419 20.013584706026482 2011-Dec-15 04:55:43 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-15 04:55:43 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-15 04:55:43 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-15 04:55:43 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_153 2011-Dec-15 04:55:43 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-15 04:55:43 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-15 04:55:43 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-15 04:55:43 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-15 04:55:43 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-15 04:55:43 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-15 04:55:43 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-15 04:55:43 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-15 04:55:43 LOG3 take_mock_data: PSET configuration: patternid=134900009 2011-Dec-15 04:55:43 LOG3 take_mock_data: PSET configuration: scanid=134900011 2011-Dec-15 04:55:43 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-15 04:55:43 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-15 04:55:43 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-15 04:55:43 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456363667.0 2011-Dec-15 04:55:43 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306363667.0 2011-Dec-15 04:55:43 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-15 04:55:43 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-15 04:55:43 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_153:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=134900009:scanid=134900011:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456363667.0:topobfreqhz=1306363667.0:filetype=1 2011-Dec-15 04:55:43 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-15 04:55:43 LOG5 begin_task: Level: (5) ID = <10181> Status = 0 0 0 0 ok 2011-Dec-15 04:55:43 LOG4 from_mock: From MOCK: psetok 2011-Dec-15 04:55:43 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-15 04:55:43 LOG5 end_task: Level: (5) ID = <10181> Status = 0 0 0 0 ok 2011-Dec-15 04:55:43 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-15 04:55:43 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-15 04:55:43 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-15 04:55:43 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-15 04:55:43 LOG5 begin_task: Level: (5) ID = <10182> Status = 0 0 0 0 ok 2011-Dec-15 04:55:43 LOG4 from_mock: From MOCK: starok 2011-Dec-15 04:55:43 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-15 04:55:43 LOG5 end_task: Level: (5) ID = <10182> Status = 0 0 0 0 ok 2011-Dec-15 04:55:43 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-15 04:55:43 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134900011 2011-Dec-15 04:55:43 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-15 04:55:43 LOG5 begin_task: Level: (5) ID = <10183> Status = 0 0 0 0 ok 2011-Dec-15 04:55:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-15 04:55:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-15 04:55:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32144.00 2011-Dec-15 04:55:44 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-15 04:55:44 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-15 04:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.536 (still bad) 2011-Dec-15 04:55:46 INFO2 got_mock_message: Mock spectrometer start file number is 01000 2011-Dec-15 04:55:46 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-15 04:55:46 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-15 04:55:46 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-15 04:55:46 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-15 04:55:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-15 04:55:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-15 04:55:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-15 04:55:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-15 04:55:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-15 04:55:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-15 04:55:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-15 04:55:46 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-15 04:55:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:55:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:55:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:55:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:55:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:55:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:55:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 04:55:49 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:55:49.01 2011-Dec-15 04:55:49 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323939349.01 Thu Dec 15 04:55:49 2011 2011-Dec-15 04:55:49 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-15 04:55:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.363667 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-15 04:55:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.363667 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 04:55:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.363667 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 04:55:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.363667 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-15 04:55:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.363667 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 04:55:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.363667 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 04:55:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.363667 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 04:55:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.363667 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-15 04:55:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.363667 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-15 04:55:49 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-15 04:55:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-15 04:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-15 04:55:54 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-15 04:55:55 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-15 04:55:55 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-15 04:55:55 LOG5 end_task: Level: (5) ID = <10183> Status = 0 0 0 0 ok 2011-Dec-15 04:55:55 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-15 04:55:55 LOG5 end_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2011-Dec-15 04:55:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-15 04:55:55 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-15 04:55:55 LOG5 finish_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2011-Dec-15 04:55:55 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-15 04:55:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 04:55:55 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-15 04:55:55 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2011-Dec-15 04:55:55 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-15 04:55:55 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 125.67 and ZA = 2.89 2011-Dec-15 04:55:55 LOG3 track_source: Calling 'track_source AGES3193_p3_153 125.67 2.8912686388 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-15 04:55:55 START begin_task: Starting task 'sending tracking commands' 2011-Dec-15 04:55:55 LOG5 begin_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2011-Dec-15 04:55:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_153} INFO {Slewing to source 'AGES3193_p3_153' ...} 2011-Dec-15 04:55:55 INFO1 track_source: Starting to track AGES3193_p3_153 2011-Dec-15 04:55:55 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_153" 2011-Dec-15 04:55:55 LOG3 vw_send: To DATATAKING: set ra 125.67 2011-Dec-15 04:55:55 LOG3 vw_send: To DATATAKING: set dec 2.8912686388 2011-Dec-15 04:55:55 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-15 04:55:55 LOG3 vw_send: To DATATAKING: pnt tr 125.67 2.8912686388 -CF 2011-Dec-15 04:55:55 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 04:55:55 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-15 04:55:55 LOG5 finish_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2011-Dec-15 04:55:55 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-15 04:55:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 04:55:55 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-15 04:55:55 LOG5 end_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2011-Dec-15 04:55:55 LOG1 fixed_driftmap: Parameters: HA = +00:09:59.9 Start = 10:03:41.4 LST = 10:03:34.0 diff = 7.5 secs 2011-Dec-15 04:55:55 INFO2 fixed_driftmap: Waiting 5.5 seconds for RA 9:53:42 2011-Dec-15 04:55:55 INFO2 lstwait: Waiting for 5.4 secs from LST 10:03:34 to LST 10:03:39 ... 2011-Dec-15 04:55:55 LOG4 send_obs_status: To obs_status: <1> TASKTIME 5.4400570810252189 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-15 04:55:55 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-15 04:55:55 LOG5 begin_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2011-Dec-15 04:55:55 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_153" 2011-Dec-15 04:55:55 LOG4 got_cormsg: From DATATAKING: set ra 125.67 2011-Dec-15 04:55:55 LOG4 got_cormsg: From DATATAKING: set dec 2.8912686388 2011-Dec-15 04:55:55 LOG4 got_cormsg: From DATATAKING: vw% 125.67 2011-Dec-15 04:55:55 LOG4 got_cormsg: From DATATAKING: vw% 2.8912686388 2011-Dec-15 04:55:55 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:55:55 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-15 04:55:55 LOG4 got_cormsg: From DATATAKING: pnt tr 125.67 2.8912686388 -CF 2011-Dec-15 04:55:55 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 04:55:55 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-15 04:55:55 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 04:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-15 04:56:00 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-15 04:56:00 LOG5 end_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2011-Dec-15 04:56:00 LOG4 lstwait: Finished waiting 0.56 seconds late 2011-Dec-15 04:56:00 INFO3 lstwait: Finished waiting 2011-Dec-15 04:56:01 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-15 04:56:01 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-15 04:56:01 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-15 04:56:01 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-15 04:56:01 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-15 04:56:01 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-15 04:56:01 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2011-Dec-15 04:56:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-15 04:56:01 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-15 04:56:01 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-15 04:56:01 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-15 04:56:01 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-15 04:56:01 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_153 2011-Dec-15 04:56:01 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-15 04:56:01 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-15 04:56:01 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-15 04:56:01 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-15 04:56:01 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-15 04:56:01 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-15 04:56:01 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-15 04:56:01 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-15 04:56:01 LOG3 take_mock_data: PSET configuration: patternid=134900012 2011-Dec-15 04:56:01 LOG3 take_mock_data: PSET configuration: scanid=134900012 2011-Dec-15 04:56:01 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-15 04:56:01 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-15 04:56:01 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-15 04:56:01 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456363667.0 2011-Dec-15 04:56:01 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306363667.0 2011-Dec-15 04:56:01 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-15 04:56:01 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-15 04:56:01 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_153:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=134900012:scanid=134900012:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456363667.0:topobfreqhz=1306363667.0:filetype=1 2011-Dec-15 04:56:01 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-15 04:56:01 LOG5 begin_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2011-Dec-15 04:56:01 LOG4 from_mock: From MOCK: psetok 2011-Dec-15 04:56:01 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-15 04:56:01 LOG5 end_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2011-Dec-15 04:56:01 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-15 04:56:01 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-15 04:56:01 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-15 04:56:01 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-15 04:56:01 LOG5 begin_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2011-Dec-15 04:56:01 LOG4 from_mock: From MOCK: starok 2011-Dec-15 04:56:01 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-15 04:56:01 LOG5 end_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2011-Dec-15 04:56:01 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-15 04:56:01 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 134900012 2011-Dec-15 04:56:01 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-15 04:56:01 LOG5 begin_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2011-Dec-15 04:56:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-15 04:56:01 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-15 04:56:01 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-15 04:56:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32162.00 2011-Dec-15 04:56:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-15 04:56:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.363667 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-15 04:56:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.363667 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 04:56:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.363667 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 04:56:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.363667 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-15 04:56:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.363667 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 04:56:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.363667 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 04:56:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.363667 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 04:56:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.363667 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-15 04:56:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.363667 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-15 04:56:03 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2011-Dec-15 04:56:03 INFO2 got_mock_message: Mock spectrometer start file number is 01100 2011-Dec-15 04:56:03 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-15 04:56:03 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2011-Dec-15 04:56:03 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-15 04:56:03 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-15 04:56:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-15 04:56:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-15 04:56:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-15 04:56:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-15 04:56:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-15 04:56:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-15 04:56:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-15 04:56:03 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-15 04:56:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 04:56:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 04:56:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 04:56:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 04:56:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 04:56:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 04:56:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 04:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.106 (still bad) 2011-Dec-15 04:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2011-Dec-15 04:56:06 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:56:06.01 2011-Dec-15 04:56:06 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323939366.01 Thu Dec 15 04:56:06 2011 2011-Dec-15 04:56:06 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-15 04:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-15 04:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2011-Dec-15 04:56:11 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2011-Dec-15 04:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 04:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 04:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 04:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 04:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 04:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 04:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 04:56:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-15 04:56:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.106 1.083 1.109 0.927 2011-Dec-15 04:56:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.898 0.972 1.064 1.089 2011-Dec-15 04:56:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.836 1.080 0.923 1.103 2011-Dec-15 04:56:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.056 0.027 0.919 0.027 2011-Dec-15 04:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 04:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 04:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 04:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-15 04:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2011-Dec-15 04:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 04:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 04:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 04:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 04:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2011-Dec-15 04:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 04:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 04:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 04:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 04:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 04:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 04:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 04:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 04:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 04:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 04:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 04:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2011-Dec-15 04:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 04:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 04:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 04:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 04:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 04:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-15 04:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 04:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 04:57:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-15 04:57:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 1.087 1.114 0.931 2011-Dec-15 04:57:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.896 0.972 1.062 1.086 2011-Dec-15 04:57:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.837 1.084 0.925 1.104 2011-Dec-15 04:57:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 0.027 0.922 0.028 2011-Dec-15 04:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 04:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 04:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-15 04:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-15 04:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 04:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-15 04:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 04:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 04:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 04:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 04:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 04:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 04:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 04:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 04:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2011-Dec-15 04:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-15 04:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-15 04:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-15 04:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-15 04:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-15 04:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2011-Dec-15 04:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.111 (still bad) 2011-Dec-15 04:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2011-Dec-15 04:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.111 (still bad) 2011-Dec-15 04:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.107 (still bad) 2011-Dec-15 04:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2011-Dec-15 04:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.110 (still bad) 2011-Dec-15 04:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2011-Dec-15 04:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2011-Dec-15 04:58:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-15 04:58:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.085 1.108 0.929 2011-Dec-15 04:58:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.898 0.973 1.065 1.090 2011-Dec-15 04:58:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.838 1.083 0.921 1.102 2011-Dec-15 04:58:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 0.026 0.923 0.026 2011-Dec-15 04:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2011-Dec-15 04:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.108 (still bad) 2011-Dec-15 04:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 04:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 04:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 04:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 04:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 04:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 04:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2011-Dec-15 04:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 04:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 04:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 04:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 04:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 04:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2011-Dec-15 04:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 04:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-15 04:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2011-Dec-15 04:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2011-Dec-15 04:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-15 04:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2011-Dec-15 04:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-15 04:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2011-Dec-15 04:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-15 04:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-15 04:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-15 04:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2011-Dec-15 04:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2011-Dec-15 04:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2011-Dec-15 04:59:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-15 04:59:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.104 1.083 1.121 0.937 2011-Dec-15 04:59:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.899 0.973 1.063 1.088 2011-Dec-15 04:59:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.838 1.084 0.921 1.101 2011-Dec-15 04:59:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 0.027 0.922 0.028 2011-Dec-15 04:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2011-Dec-15 04:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2011-Dec-15 04:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.123 (still bad) 2011-Dec-15 04:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2011-Dec-15 04:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2011-Dec-15 04:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-15 04:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 04:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-15 04:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2011-Dec-15 04:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 04:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 04:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2011-Dec-15 04:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 04:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-15 05:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2011-Dec-15 05:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2011-Dec-15 05:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2011-Dec-15 05:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-15 05:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-15 05:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-15 05:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2011-Dec-15 05:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-15 05:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:00:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-15 05:00:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.083 1.110 0.930 2011-Dec-15 05:00:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.898 0.974 1.069 1.092 2011-Dec-15 05:00:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.836 1.082 0.920 1.097 2011-Dec-15 05:00:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.056 0.027 0.919 0.027 2011-Dec-15 05:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2011-Dec-15 05:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-15 05:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2011-Dec-15 05:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2011-Dec-15 05:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.123 (still bad) 2011-Dec-15 05:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.131 (still bad) 2011-Dec-15 05:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2011-Dec-15 05:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2011-Dec-15 05:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.154 (still bad) 2011-Dec-15 05:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.156 (still bad) 2011-Dec-15 05:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.153 (still bad) 2011-Dec-15 05:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2011-Dec-15 05:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2011-Dec-15 05:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.130 (still bad) 2011-Dec-15 05:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.123 (still bad) 2011-Dec-15 05:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-15 05:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-15 05:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:01:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-15 05:01:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 1.081 1.110 0.929 2011-Dec-15 05:01:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.902 0.975 1.069 1.092 2011-Dec-15 05:01:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.841 1.086 0.926 1.105 2011-Dec-15 05:01:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.027 0.940 0.027 2011-Dec-15 05:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2011-Dec-15 05:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2011-Dec-15 05:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2011-Dec-15 05:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2011-Dec-15 05:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2011-Dec-15 05:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:02:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-15 05:02:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.097 1.077 1.107 0.926 2011-Dec-15 05:02:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.903 0.977 1.070 1.092 2011-Dec-15 05:02:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.840 1.085 0.925 1.103 2011-Dec-15 05:02:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.055 0.027 0.920 0.027 2011-Dec-15 05:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-15 05:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.111 (still bad) 2011-Dec-15 05:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.110 (still bad) 2011-Dec-15 05:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.109 (still bad) 2011-Dec-15 05:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.109 (still bad) 2011-Dec-15 05:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.107 (still bad) 2011-Dec-15 05:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.109 (still bad) 2011-Dec-15 05:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2011-Dec-15 05:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2011-Dec-15 05:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.130 (still bad) 2011-Dec-15 05:03:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-15 05:03:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.139 1.118 1.110 0.927 2011-Dec-15 05:03:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.897 0.969 1.064 1.087 2011-Dec-15 05:03:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.837 1.078 0.921 1.100 2011-Dec-15 05:03:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.056 0.027 0.920 0.027 2011-Dec-15 05:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2011-Dec-15 05:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2011-Dec-15 05:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-15 05:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.126 (still bad) 2011-Dec-15 05:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.123 (still bad) 2011-Dec-15 05:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2011-Dec-15 05:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2011-Dec-15 05:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-15 05:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2011-Dec-15 05:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2011-Dec-15 05:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-15 05:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:04:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-15 05:04:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.099 1.080 1.109 0.925 2011-Dec-15 05:04:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.897 0.968 1.063 1.085 2011-Dec-15 05:04:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.834 1.077 0.918 1.098 2011-Dec-15 05:04:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.054 0.027 0.920 0.027 2011-Dec-15 05:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-15 05:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-15 05:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-15 05:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-15 05:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-15 05:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2011-Dec-15 05:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-15 05:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-15 05:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-15 05:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-15 05:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2011-Dec-15 05:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2011-Dec-15 05:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.111 (still bad) 2011-Dec-15 05:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.114 (still bad) 2011-Dec-15 05:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.111 (still bad) 2011-Dec-15 05:05:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-15 05:05:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 1.080 1.112 0.929 2011-Dec-15 05:05:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.899 0.970 1.064 1.086 2011-Dec-15 05:05:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.835 1.079 0.920 1.099 2011-Dec-15 05:05:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.055 0.024 0.921 0.024 2011-Dec-15 05:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.114 (still bad) 2011-Dec-15 05:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.113 (still bad) 2011-Dec-15 05:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.115 (still bad) 2011-Dec-15 05:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2011-Dec-15 05:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.112 (still bad) 2011-Dec-15 05:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2011-Dec-15 05:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.110 (still bad) 2011-Dec-15 05:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2011-Dec-15 05:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.113 (still bad) 2011-Dec-15 05:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2011-Dec-15 05:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2011-Dec-15 05:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.126 (still bad) 2011-Dec-15 05:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-15 05:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-15 05:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2011-Dec-15 05:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2011-Dec-15 05:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.131 (still bad) 2011-Dec-15 05:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.128 (still bad) 2011-Dec-15 05:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.125 (still bad) 2011-Dec-15 05:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-15 05:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2011-Dec-15 05:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-15 05:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-15 05:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:06:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-15 05:06:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 1.080 1.108 0.925 2011-Dec-15 05:06:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.897 0.972 1.063 1.087 2011-Dec-15 05:06:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.835 1.080 0.920 1.101 2011-Dec-15 05:06:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.027 0.927 0.027 2011-Dec-15 05:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-15 05:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2011-Dec-15 05:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:07:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-15 05:07:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.082 1.107 0.926 2011-Dec-15 05:07:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.894 0.970 1.064 1.088 2011-Dec-15 05:07:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.834 1.080 0.918 1.100 2011-Dec-15 05:07:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.057 0.027 0.921 0.027 2011-Dec-15 05:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2011-Dec-15 05:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-15 05:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-15 05:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-15 05:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:08:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-15 05:08:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 1.080 1.109 0.930 2011-Dec-15 05:08:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.898 0.971 1.062 1.088 2011-Dec-15 05:08:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.836 1.079 0.922 1.100 2011-Dec-15 05:08:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 0.027 0.922 0.027 2011-Dec-15 05:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-15 05:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2011-Dec-15 05:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.111 (still bad) 2011-Dec-15 05:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2011-Dec-15 05:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.112 (still bad) 2011-Dec-15 05:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2011-Dec-15 05:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2011-Dec-15 05:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2011-Dec-15 05:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-15 05:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-15 05:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2011-Dec-15 05:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:09:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-15 05:09:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.099 1.078 1.109 0.928 2011-Dec-15 05:09:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.897 0.968 1.066 1.088 2011-Dec-15 05:09:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.835 1.078 0.919 1.098 2011-Dec-15 05:09:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.058 0.027 0.921 0.027 2011-Dec-15 05:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2011-Dec-15 05:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2011-Dec-15 05:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2011-Dec-15 05:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.110 (still bad) 2011-Dec-15 05:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2011-Dec-15 05:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2011-Dec-15 05:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.113 (still bad) 2011-Dec-15 05:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2011-Dec-15 05:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2011-Dec-15 05:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.108 (still bad) 2011-Dec-15 05:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2011-Dec-15 05:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.108 (still bad) 2011-Dec-15 05:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-15 05:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:10:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-15 05:10:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.099 1.078 1.109 0.927 2011-Dec-15 05:10:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.899 0.971 1.064 1.087 2011-Dec-15 05:10:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.836 1.080 0.919 1.098 2011-Dec-15 05:10:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.055 0.027 0.919 0.027 2011-Dec-15 05:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2011-Dec-15 05:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:11:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-15 05:11:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 1.081 1.107 0.929 2011-Dec-15 05:11:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.898 0.970 1.065 1.086 2011-Dec-15 05:11:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.835 1.079 0.920 1.099 2011-Dec-15 05:11:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.057 0.027 0.922 0.027 2011-Dec-15 05:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-15 05:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2011-Dec-15 05:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2011-Dec-15 05:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:12:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-15 05:12:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.099 1.081 1.108 0.924 2011-Dec-15 05:12:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.896 0.968 1.065 1.088 2011-Dec-15 05:12:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.836 1.081 0.921 1.100 2011-Dec-15 05:12:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.056 0.027 0.920 0.027 2011-Dec-15 05:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2011-Dec-15 05:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.107 (still bad) 2011-Dec-15 05:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.107 (still bad) 2011-Dec-15 05:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2011-Dec-15 05:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.107 (still bad) 2011-Dec-15 05:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.107 (still bad) 2011-Dec-15 05:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.112 (still bad) 2011-Dec-15 05:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2011-Dec-15 05:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2011-Dec-15 05:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.108 (still bad) 2011-Dec-15 05:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2011-Dec-15 05:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.108 (still bad) 2011-Dec-15 05:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.112 (still bad) 2011-Dec-15 05:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2011-Dec-15 05:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2011-Dec-15 05:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.110 (still bad) 2011-Dec-15 05:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2011-Dec-15 05:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2011-Dec-15 05:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-15 05:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2011-Dec-15 05:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.111 (still bad) 2011-Dec-15 05:13:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-15 05:13:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 1.083 1.108 0.929 2011-Dec-15 05:13:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.898 0.970 1.064 1.088 2011-Dec-15 05:13:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.837 1.081 0.923 1.099 2011-Dec-15 05:13:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.056 0.025 0.920 0.025 2011-Dec-15 05:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.112 (still bad) 2011-Dec-15 05:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2011-Dec-15 05:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2011-Dec-15 05:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.113 (still bad) 2011-Dec-15 05:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-15 05:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-15 05:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2011-Dec-15 05:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:14:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-15 05:14:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.084 1.111 0.929 2011-Dec-15 05:14:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.897 0.971 1.067 1.090 2011-Dec-15 05:14:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.837 1.082 0.922 1.105 2011-Dec-15 05:14:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 0.027 0.924 0.027 2011-Dec-15 05:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2011-Dec-15 05:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2011-Dec-15 05:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-15 05:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-15 05:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-15 05:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-15 05:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-15 05:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2011-Dec-15 05:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2011-Dec-15 05:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-15 05:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-15 05:15:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-15 05:15:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 1.084 1.114 0.931 2011-Dec-15 05:15:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.900 0.968 1.066 1.089 2011-Dec-15 05:15:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.836 1.082 0.924 1.103 2011-Dec-15 05:15:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 0.027 0.923 0.027 2011-Dec-15 05:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-15 05:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-15 05:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-15 05:16:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-15 05:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:16:07 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-15 05:16:07 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-15 05:16:07 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-15 05:16:07 LOG5 end_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2011-Dec-15 05:16:07 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-15 05:16:07 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2011-Dec-15 05:16:07 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-15 05:16:07 LOG5 finish_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2011-Dec-15 05:16:07 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-15 05:16:07 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-15 05:16:07 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-15 05:16:07 LOG5 end_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2011-Dec-15 05:16:07 COMMAND run_command_line: EXECUTING command 34: 'ENDIF' 2011-Dec-15 05:16:07 COMMAND run_command_line: EXECUTING command 37: 'IF LSTSLEW(AGES3193_p3_153) < 102710 THEN' 2011-Dec-15 05:16:07 LOG3 is_if_valid: Current source data: up 464.4 7.3 UP - - 53 1.8 2011-Dec-15 05:16:07 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_153) < 102710 2011-Dec-15 05:16:07 INFO5 is_if_valid: Condition parsed as: 10.427026 < 10.452777777777778 2011-Dec-15 05:16:07 COMMAND run_command_line: EXECUTING command 38: 'FIXEDDRIFT az=103.27 alfaangle=-83.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_153 ra=95300.00 dec=200500.00' 2011-Dec-15 05:16:07 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-15 05:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-15 05:16:08 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-15 05:16:08 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 103.27 -83.1 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_153 95300.00 200500.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-15 05:16:08 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-15 05:16:08 LOG5 begin_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2011-Dec-15 05:16:08 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_153' 2011-Dec-15 05:16:08 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-15 05:16:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_153} 2011-Dec-15 05:16:08 INFO3 fixed_driftmap: Sending telescope to Az = 103.27 and ZA = 8.09 2011-Dec-15 05:16:08 LOG3 track_source: Calling 'track_source AGES3193_p3_153 103.27 8.0865904695 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-15 05:16:08 START begin_task: Starting task 'sending tracking commands' 2011-Dec-15 05:16:08 LOG5 begin_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2011-Dec-15 05:16:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_153} INFO {Slewing to source 'AGES3193_p3_153' ...} 2011-Dec-15 05:16:08 INFO1 track_source: Starting to track AGES3193_p3_153 2011-Dec-15 05:16:08 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_153" 2011-Dec-15 05:16:08 LOG3 vw_send: To DATATAKING: set ra 103.27 2011-Dec-15 05:16:08 LOG3 vw_send: To DATATAKING: set dec 8.0865904695 2011-Dec-15 05:16:08 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-15 05:16:08 LOG3 vw_send: To DATATAKING: pnt tr 103.27 8.0865904695 -CF 2011-Dec-15 05:16:08 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 05:16:08 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-15 05:16:08 LOG5 finish_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2011-Dec-15 05:16:08 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-15 05:16:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 05:16:08 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-15 05:16:08 LOG5 end_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2011-Dec-15 05:16:08 START begin_task: Starting task 'rotate ALFA to -83.1 degrees' 2011-Dec-15 05:16:08 LOG5 begin_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2011-Dec-15 05:16:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -83.1 degrees ...} 2011-Dec-15 05:16:08 INFO2 rotate_alfa: ALFA commanded to -83.1 degrees 2011-Dec-15 05:16:08 LOG3 sock_errsend: To ALFAMOTOR: POSITION -83.1 REPLY 2011-Dec-15 05:16:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-15 05:16:08 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-15 05:16:08 LOG5 begin_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2011-Dec-15 05:16:08 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_153" 2011-Dec-15 05:16:08 LOG4 got_cormsg: From DATATAKING: set ra 103.27 2011-Dec-15 05:16:08 LOG4 got_cormsg: From DATATAKING: set dec 8.0865904695 2011-Dec-15 05:16:08 LOG4 got_cormsg: From DATATAKING: vw% 103.27 2011-Dec-15 05:16:08 LOG4 got_cormsg: From DATATAKING: vw% 8.0865904695 2011-Dec-15 05:16:08 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 05:16:08 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-15 05:16:08 LOG4 got_cormsg: From DATATAKING: pnt tr 103.27 8.0865904695 -CF 2011-Dec-15 05:16:08 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 05:16:08 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-15 05:16:08 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 05:17:33 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-15 05:17:33 INFO3 alfa_motor: ALFA rotator in-position -83.10 degrees 2011-Dec-15 05:17:33 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-15 05:17:33 LOG5 end_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2011-Dec-15 05:17:33 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-15 05:17:33 STOP finish_task: Finishing task 'rotate ALFA to -83.1 degrees' 2011-Dec-15 05:17:33 LOG5 finish_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2011-Dec-15 05:17:33 INFO2 finish_task: DONE finished configuration: rotating ALFA to -83.1 degrees 2011-Dec-15 05:17:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 05:17:33 STOP end_task: Finishing task 'rotate ALFA to -83.1 degrees' with status 'OK' 2011-Dec-15 05:17:33 LOG5 end_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2011-Dec-15 05:17:33 START begin_task: Starting task 'waiting on telescope' 2011-Dec-15 05:17:33 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2011-Dec-15 05:17:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-15 05:17:33 LOG3 waittrk: Start waittrk 5 2011-Dec-15 05:17:33 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-15 05:17:33 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2011-Dec-15 05:17:38 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-15 05:17:38 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2011-Dec-15 05:17:38 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-15 05:17:38 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2011-Dec-15 05:18:23 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-15 05:18:23 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2011-Dec-15 05:18:23 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-15 05:18:23 INFO2 waittrk: Now tracking AGES3193_p3_153 2011-Dec-15 05:18:23 LOG4 waittrk: Current telescope position: Az = 463.08 ZA = 8.08 2011-Dec-15 05:18:23 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-15 05:18:23 LOG5 finish_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2011-Dec-15 05:18:23 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-15 05:18:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 05:18:23 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-15 05:18:23 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2011-Dec-15 05:18:23 START begin_task: Starting task 'selecting calibration type' 2011-Dec-15 05:18:23 LOG5 begin_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2011-Dec-15 05:18:23 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-15 05:18:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-15 05:18:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 05:18:23 START begin_task: Starting task 'waiting on setcal' 2011-Dec-15 05:18:23 LOG5 begin_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2011-Dec-15 05:18:23 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-15 05:18:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 05:18:24 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 05:18:24 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-15 05:18:24 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-15 05:18:24 LOG5 end_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2011-Dec-15 05:18:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-15 05:18:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-15 05:18:24 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-15 05:18:24 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-15 05:18:24 LOG5 begin_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2011-Dec-15 05:18:24 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 05:18:24 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-15 05:18:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-15 05:18:24 LOG5 end_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2011-Dec-15 05:18:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-15 05:18:24 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-15 05:18:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-15 05:18:24 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-15 05:18:24 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-15 05:18:24 LOG5 begin_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2011-Dec-15 05:18:24 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-15 05:18:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-15 05:18:24 LOG5 end_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2011-Dec-15 05:18:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-15 05:18:24 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-15 05:18:24 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-15 05:18:24 LOG5 end_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2011-Dec-15 05:18:24 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Dec-15 05:18:24 INFO2 astwait: Waiting for 5 seconds from 09:18:24 to 09:18:29 UTC ... 2011-Dec-15 05:18:24 LOG4 send_obs_status: To obs_status: <1> TASKTIME 5 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-15 05:18:24 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Dec-15 05:18:24 LOG5 begin_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2011-Dec-15 05:18:29 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Dec-15 05:18:29 LOG5 end_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2011-Dec-15 05:18:29 INFO3 astwait: Finished waiting 2011-Dec-15 05:18:29 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-15 05:18:29 LOG5 dopset_later: Calling 'dopset_later 60.641487277982975' 2011-Dec-15 05:18:29 INFO3 dopset_later: Setting Doppler correction for 05:19:29 (60.6 seconds from now) 2011-Dec-15 05:18:29 LOG5 antvel: Calling 'antvel 103.270000 8.086590 F Heliocentric 60.641487277982975' 2011-Dec-15 05:18:29 LOG2 antvel: Transforming current Az = 103.27 ZA = 8.09 to apparent RA = 09:53:41.3 Dec = +20:01:23.3 2011-Dec-15 05:18:29 LOG2 antvel: Parameters to Doppler: Heliocentric 33569 2011 349 0.0 2011-Dec-15 05:18:29 INFO5 antvel: Computed antenna velocity: -26.04835 km/s 2011-Dec-15 05:18:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-26.048347945 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-15 05:18:29 INFO4 dopset_gen: New sky frequencies: 1381.363452 1381.363452 1381.363452 1381.363452 1381.363452 1381.363452 1381.363452 1381.363452 1381.363452 2011-Dec-15 05:18:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.363452 sky0=1381.363452 sky1=1381.363452 sky2=1381.363452 sky3=1381.363452 sky4=1381.363452 sky5=1381.363452 sky6=1381.363452 sky7=1381.363452 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-15 05:18:29 LOG2 dopset_gen: Result from 'sky2syn': 1631.363452 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-15 05:18:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631363452.0} 2011-Dec-15 05:18:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 05:18:29 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-15 05:18:29 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-15 05:18:29 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.9 Dec = +20:04:46.7 2011-Dec-15 05:18:29 LOG3 track_source: Calling 'track_source AGES3193_p3_153 095203.9 200446.7 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-15 05:18:29 START begin_task: Starting task 'sending tracking commands' 2011-Dec-15 05:18:29 LOG5 begin_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2011-Dec-15 05:18:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_153} INFO {Slewing to source 'AGES3193_p3_153' ...} 2011-Dec-15 05:18:29 INFO1 track_source: Starting to track AGES3193_p3_153 2011-Dec-15 05:18:29 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_153" 2011-Dec-15 05:18:29 LOG3 vw_send: To DATATAKING: set ra 095203.9 2011-Dec-15 05:18:29 LOG3 vw_send: To DATATAKING: set dec 200446.7 2011-Dec-15 05:18:29 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-15 05:18:29 LOG3 vw_send: To DATATAKING: pnt tr 095203.9 200446.7 -CJ 2011-Dec-15 05:18:29 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 05:18:29 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-15 05:18:29 LOG5 finish_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2011-Dec-15 05:18:29 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-15 05:18:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 05:18:29 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-15 05:18:29 LOG5 end_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2011-Dec-15 05:18:29 START begin_task: Starting task 'waiting on telescope' 2011-Dec-15 05:18:29 LOG5 begin_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2011-Dec-15 05:18:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-15 05:18:29 LOG3 waittrk: Start waittrk 5 2011-Dec-15 05:18:29 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-15 05:18:29 LOG5 begin_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2011-Dec-15 05:18:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631363452.0} 2011-Dec-15 05:18:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 05:18:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 05:18:29 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_153" 2011-Dec-15 05:18:29 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-15 05:18:29 LOG4 got_cormsg: From DATATAKING: set ra 095203.9 2011-Dec-15 05:18:29 LOG4 got_cormsg: From DATATAKING: set dec 200446.7 2011-Dec-15 05:18:29 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-15 05:18:29 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.9 200446.7 -CJ 2011-Dec-15 05:18:29 LOG4 got_cormsg: From DATATAKING: 095203.9 2011-Dec-15 05:18:29 LOG4 got_cormsg: From DATATAKING: vw% 200446.7 2011-Dec-15 05:18:29 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2011-Dec-15 05:18:29 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 05:18:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 05:18:34 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-15 05:18:34 LOG5 end_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2011-Dec-15 05:18:34 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-15 05:18:34 LOG5 begin_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2011-Dec-15 05:18:36 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-15 05:18:36 LOG5 end_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2011-Dec-15 05:18:36 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-15 05:18:36 INFO2 waittrk: Now tracking AGES3193_p3_153 2011-Dec-15 05:18:36 LOG4 waittrk: Current telescope position: Az = 463.04 ZA = 8.10 2011-Dec-15 05:18:36 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-15 05:18:36 LOG5 finish_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2011-Dec-15 05:18:36 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-15 05:18:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 05:18:36 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-15 05:18:36 LOG5 end_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2011-Dec-15 05:18:36 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-15 05:18:36 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2011-Dec-15 05:18:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-15 05:18:36 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-15 05:18:36 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-15 05:18:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-15 05:18:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 05:18:36 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-15 05:18:36 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2011-Dec-15 05:18:37 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-15 05:18:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 05:18:38 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 05:18:38 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-15 05:18:38 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-15 05:18:38 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2011-Dec-15 05:18:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-15 05:18:38 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-15 05:18:38 LOG5 begin_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2011-Dec-15 05:18:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-15 05:18:38 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-15 05:18:38 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-15 05:18:38 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-15 05:18:38 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-15 05:18:38 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-15 05:18:38 LOG5 begin_task: Level: (5) ID = <10209> Status = 0 0 0 0 ok 2011-Dec-15 05:18:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-15 05:18:38 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 05:18:38 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 8 6 dB 2011-Dec-15 05:18:38 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 4 dB 2011-Dec-15 05:18:39 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 2 dB 2011-Dec-15 05:18:39 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2011-Dec-15 05:18:39 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-15 05:18:39 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-15 05:18:39 LOG5 end_task: Level: (5) ID = <10209> Status = 0 0 0 0 ok 2011-Dec-15 05:18:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.120 1.088 ALFA beam 1: 0.896 0.906 2011-Dec-15 05:18:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.914 0.968 ALFA beam 3: 1.063 1.121 2011-Dec-15 05:18:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.843 1.120 ALFA beam 5: 0.963 0.864 2011-Dec-15 05:18:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.108 0.014 ALFA beam 7: 0.964 0.014 2011-Dec-15 05:18:39 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-15 05:18:39 LOG5 finish_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2011-Dec-15 05:18:39 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-15 05:18:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 05:18:39 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-15 05:18:39 LOG5 end_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2011-Dec-15 05:18:39 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-15 05:18:39 LOG5 begin_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2011-Dec-15 05:18:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-15 05:18:39 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-15 05:18:39 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-15 05:18:39 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-15 05:18:39 LOG5 begin_task: Level: (5) ID = <10211> Status = 0 0 0 0 ok 2011-Dec-15 05:18:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-15 05:18:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.120 1.088 0.896 0.906 2011-Dec-15 05:18:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.914 0.968 1.063 1.121 2011-Dec-15 05:18:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.843 1.120 0.963 0.864 2011-Dec-15 05:18:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 0.014 0.964 0.014 2011-Dec-15 05:18:44 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.8 28.0 B 30.6 30.6 mn:A 0.1 -0.1 B -0.2 -0.2 gn: 11 11 2011-Dec-15 05:18:44 INFO3 from_mock: From MOCK: b0s1g0 rms:A 32.0 30.6 B 28.4 30.0 mn:A 0.2 -0.5 B -0.3 0.2 gn: 12 11 2011-Dec-15 05:18:44 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.5 28.6 B 32.7 28.6 mn:A 0.8 0.8 B 0.2 0.0 gn: 7 11 2011-Dec-15 05:18:44 INFO3 from_mock: From MOCK: b1s1g0 rms:A 30.1 27.7 B 31.1 31.2 mn:A -0.3 -0.2 B 0.4 0.2 gn: 8 10 2011-Dec-15 05:18:44 INFO3 from_mock: From MOCK: b2s0g0 rms:A 28.7 27.9 B 27.9 29.2 mn:A -0.0 -0.3 B 0.3 0.0 gn: 10 11 2011-Dec-15 05:18:44 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.6 29.9 B 32.4 30.1 mn:A 0.1 -0.4 B 0.1 0.2 gn: 11 12 2011-Dec-15 05:18:44 INFO3 from_mock: From MOCK: b3s0g0 rms:A 29.1 28.8 B 31.2 27.9 mn:A 0.4 -0.3 B -0.0 -0.3 gn: 12 12 2011-Dec-15 05:18:44 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.4 29.7 B 29.7 30.9 mn:A -0.2 0.3 B 0.1 0.2 gn: 12 12 2011-Dec-15 05:18:44 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.6 29.7 B 28.3 28.5 mn:A -0.2 -0.2 B -0.4 -0.0 gn: 13 11 2011-Dec-15 05:18:44 INFO3 from_mock: From MOCK: b4s1g0 rms:A 32.7 29.6 B 30.7 29.6 mn:A -0.1 0.0 B -0.4 0.2 gn: 16 13 2011-Dec-15 05:18:44 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.6 28.5 B 31.1 31.2 mn:A 0.3 0.5 B -0.1 0.5 gn: 12 11 2011-Dec-15 05:18:44 INFO3 from_mock: From MOCK: b5s1g0 rms:A 29.7 29.5 B 31.5 31.3 mn:A -0.5 0.2 B -0.1 0.2 gn: 12 11 2011-Dec-15 05:18:44 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.9 30.1 B 14.5 14.9 mn:A -0.5 0.3 B 0.4 -0.4 gn: 13 31 2011-Dec-15 05:18:44 INFO3 from_mock: From MOCK: b6s1g0 rms:A 29.9 27.2 B 11.5 11.2 mn:A 0.6 0.4 B 0.1 0.1 gn: 13 31 2011-Dec-15 05:18:44 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-15 05:18:44 LOG5 end_task: Level: (5) ID = <10211> Status = 0 0 0 0 ok 2011-Dec-15 05:18:45 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-15 05:18:45 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-15 05:18:45 LOG5 finish_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2011-Dec-15 05:18:45 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-15 05:18:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 05:18:45 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-15 05:18:45 LOG5 end_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2011-Dec-15 05:18:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-15 05:18:45 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-15 05:18:45 LOG5 finish_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2011-Dec-15 05:18:45 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-15 05:18:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 05:18:45 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-15 05:18:45 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2011-Dec-15 05:18:45 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2011-Dec-15 05:18:45 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2011-Dec-15 05:18:45 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2011-Dec-15 05:18:45 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2011-Dec-15 05:18:45 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-15 05:18:45 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-15 05:18:45 LOG5 begin_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2011-Dec-15 05:18:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-15 05:18:45 START begin_task: Starting task 'selecting calibration type' 2011-Dec-15 05:18:45 LOG5 begin_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2011-Dec-15 05:18:45 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-15 05:18:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-15 05:18:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 05:18:45 START begin_task: Starting task 'waiting on setcal' 2011-Dec-15 05:18:45 LOG5 begin_task: Level: (5) ID = <10214> Status = 0 0 0 0 ok 2011-Dec-15 05:18:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2011-Dec-15 05:18:45 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-15 05:18:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 05:18:45 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 05:18:45 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-15 05:18:45 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-15 05:18:45 LOG5 end_task: Level: (5) ID = <10214> Status = 0 0 0 0 ok 2011-Dec-15 05:18:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-15 05:18:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-15 05:18:45 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-15 05:18:45 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-15 05:18:45 LOG5 begin_task: Level: (5) ID = <10215> Status = 0 0 0 0 ok 2011-Dec-15 05:18:45 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 05:18:45 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-15 05:18:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-15 05:18:45 LOG5 end_task: Level: (5) ID = <10215> Status = 0 0 0 0 ok 2011-Dec-15 05:18:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-15 05:18:45 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-15 05:18:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-15 05:18:45 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-15 05:18:45 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-15 05:18:45 LOG5 begin_task: Level: (5) ID = <10216> Status = 0 0 0 0 ok 2011-Dec-15 05:18:45 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-15 05:18:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-15 05:18:45 LOG5 end_task: Level: (5) ID = <10216> Status = 0 0 0 0 ok 2011-Dec-15 05:18:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-15 05:18:45 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-15 05:18:45 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-15 05:18:45 LOG5 end_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2011-Dec-15 05:18:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-15 05:18:45 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-15 05:18:45 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-15 05:18:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-15 05:18:45 LOG5 begin_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2011-Dec-15 05:18:45 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-15 05:18:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-15 05:18:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-15 05:18:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-15 05:18:45 LOG5 end_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2011-Dec-15 05:18:46 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-15 05:18:46 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-15 05:18:46 LOG5 begin_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2011-Dec-15 05:18:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-15 05:18:46 LOG5 log_alfabeam: Parameters: 9.8677499999999991 20.079638888888891 10.441314 2011.9561159593886 -83.100098 2011-Dec-15 05:18:46 LOG4 log_alfabeam: ALFABEAM 0 9.867750000000003 20.079638888888894 2011-Dec-15 05:18:46 LOG4 log_alfabeam: ALFABEAM 1 9.865938444871073 20.170222418579211 2011-Dec-15 05:18:46 LOG4 log_alfabeam: ALFABEAM 2 9.860497955599573 20.109631920258831 2011-Dec-15 05:18:46 LOG4 log_alfabeam: ALFABEAM 3 9.862360985956579 20.018645666037393 2011-Dec-15 05:18:46 LOG4 log_alfabeam: ALFABEAM 4 9.869630633589120 19.989740150318081 2011-Dec-15 05:18:46 LOG4 log_alfabeam: ALFABEAM 5 9.875003936039276 20.049855711523957 2011-Dec-15 05:18:46 LOG4 log_alfabeam: ALFABEAM 6 9.873174077846063 20.139353904351736 2011-Dec-15 05:18:46 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-15 05:18:46 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-15 05:18:46 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-15 05:18:46 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_153 2011-Dec-15 05:18:46 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-15 05:18:46 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-15 05:18:46 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-15 05:18:46 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-15 05:18:46 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-15 05:18:46 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-15 05:18:46 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-15 05:18:46 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-15 05:18:46 LOG3 take_mock_data: PSET configuration: patternid=134900012 2011-Dec-15 05:18:46 LOG3 take_mock_data: PSET configuration: scanid=134900013 2011-Dec-15 05:18:46 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-15 05:18:46 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-15 05:18:46 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-15 05:18:46 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456363452.0 2011-Dec-15 05:18:46 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306363452.0 2011-Dec-15 05:18:46 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-15 05:18:46 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-15 05:18:46 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_153:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=134900012:scanid=134900013:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456363452.0:topobfreqhz=1306363452.0:filetype=1 2011-Dec-15 05:18:46 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-15 05:18:46 LOG5 begin_task: Level: (5) ID = <10219> Status = 0 0 0 0 ok 2011-Dec-15 05:18:46 LOG4 from_mock: From MOCK: psetok 2011-Dec-15 05:18:46 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-15 05:18:46 LOG5 end_task: Level: (5) ID = <10219> Status = 0 0 0 0 ok 2011-Dec-15 05:18:46 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-15 05:18:46 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-15 05:18:46 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-15 05:18:46 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-15 05:18:46 LOG5 begin_task: Level: (5) ID = <10220> Status = 0 0 0 0 ok 2011-Dec-15 05:18:46 NOTE WAPPDATA-new_file: New FITS file: wapp.20111215.a2048.0005.fits 2011-Dec-15 05:18:46 LOG4 from_mock: From MOCK: starok 2011-Dec-15 05:18:46 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-15 05:18:46 LOG5 end_task: Level: (5) ID = <10220> Status = 0 0 0 0 ok 2011-Dec-15 05:18:46 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-15 05:18:46 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134900013 2011-Dec-15 05:18:46 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-15 05:18:46 LOG5 begin_task: Level: (5) ID = <10221> Status = 0 0 0 0 ok 2011-Dec-15 05:18:46 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111215.a2048.0005.fits} 2011-Dec-15 05:18:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-15 05:18:46 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-15 05:18:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-15 05:18:46 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-15 05:18:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 33527.00 2011-Dec-15 05:18:48 INFO2 got_mock_message: Mock spectrometer start file number is 01200 2011-Dec-15 05:18:48 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-15 05:18:48 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-15 05:18:48 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-15 05:18:48 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-15 05:18:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-15 05:18:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-15 05:18:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-15 05:18:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-15 05:18:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-15 05:18:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-15 05:18:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-15 05:18:48 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-15 05:18:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 05:18:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 05:18:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 05:18:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 05:18:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 05:18:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 05:18:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 05:18:51 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:18:51.01 2011-Dec-15 05:18:51 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323940731.01 Thu Dec 15 05:18:51 2011 2011-Dec-15 05:18:51 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-15 05:18:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.363452 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-15 05:18:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.363452 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 05:18:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.363452 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 05:18:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.363452 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-15 05:18:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.363452 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 05:18:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.363452 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 05:18:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.363452 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 05:18:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.363452 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-15 05:18:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.363452 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-15 05:18:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-15 05:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.572 (still bad) 2011-Dec-15 05:18:57 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-15 05:18:57 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-15 05:18:57 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-15 05:18:57 LOG5 end_task: Level: (5) ID = <10221> Status = 0 0 0 0 ok 2011-Dec-15 05:18:57 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-15 05:18:57 LOG5 end_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2011-Dec-15 05:18:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-15 05:18:57 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-15 05:18:57 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-15 05:18:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-15 05:18:57 LOG5 begin_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2011-Dec-15 05:18:57 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-15 05:18:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-15 05:18:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-15 05:18:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-15 05:18:57 LOG5 end_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2011-Dec-15 05:18:57 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-15 05:18:57 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-15 05:18:57 LOG5 begin_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2011-Dec-15 05:18:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-15 05:18:57 LOG5 log_alfabeam: Parameters: 9.8677499999999991 20.079638888888891 10.444378 2011.9561163079575 -83.100098 2011-Dec-15 05:18:57 LOG4 log_alfabeam: ALFABEAM 0 9.867750000000003 20.079638888888901 2011-Dec-15 05:18:57 LOG4 log_alfabeam: ALFABEAM 1 9.865930395790194 20.170189365310286 2011-Dec-15 05:18:57 LOG4 log_alfabeam: ALFABEAM 2 9.860495349524914 20.109506315992213 2011-Dec-15 05:18:57 LOG4 log_alfabeam: ALFABEAM 3 9.862366196547677 20.018556189691274 2011-Dec-15 05:18:57 LOG4 log_alfabeam: ALFABEAM 4 9.869638240277906 19.989770760401235 2011-Dec-15 05:18:57 LOG4 log_alfabeam: ALFABEAM 5 9.875006504325702 20.049979893246260 2011-Dec-15 05:18:57 LOG4 log_alfabeam: ALFABEAM 6 9.873168814135830 20.139450512585434 2011-Dec-15 05:18:57 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-15 05:18:57 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-15 05:18:57 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-15 05:18:57 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_153 2011-Dec-15 05:18:57 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-15 05:18:57 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-15 05:18:57 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-15 05:18:57 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-15 05:18:57 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-15 05:18:57 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-15 05:18:57 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-15 05:18:57 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-15 05:18:57 LOG3 take_mock_data: PSET configuration: patternid=134900012 2011-Dec-15 05:18:57 LOG3 take_mock_data: PSET configuration: scanid=134900014 2011-Dec-15 05:18:57 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-15 05:18:57 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-15 05:18:57 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-15 05:18:57 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456363452.0 2011-Dec-15 05:18:57 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306363452.0 2011-Dec-15 05:18:57 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-15 05:18:57 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-15 05:18:57 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_153:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=134900012:scanid=134900014:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456363452.0:topobfreqhz=1306363452.0:filetype=1 2011-Dec-15 05:18:57 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-15 05:18:57 LOG5 begin_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2011-Dec-15 05:18:57 LOG4 from_mock: From MOCK: psetok 2011-Dec-15 05:18:57 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-15 05:18:57 LOG5 end_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2011-Dec-15 05:18:57 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-15 05:18:57 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-15 05:18:57 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-15 05:18:57 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-15 05:18:57 LOG5 begin_task: Level: (5) ID = <10225> Status = 0 0 0 0 ok 2011-Dec-15 05:18:57 LOG4 from_mock: From MOCK: starok 2011-Dec-15 05:18:57 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-15 05:18:57 LOG5 end_task: Level: (5) ID = <10225> Status = 0 0 0 0 ok 2011-Dec-15 05:18:57 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-15 05:18:57 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134900014 2011-Dec-15 05:18:57 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-15 05:18:57 LOG5 begin_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2011-Dec-15 05:18:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-15 05:18:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-15 05:18:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 33538.00 2011-Dec-15 05:18:58 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-15 05:18:58 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-15 05:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.572 (still bad) 2011-Dec-15 05:18:59 INFO2 got_mock_message: Mock spectrometer start file number is 01300 2011-Dec-15 05:18:59 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-15 05:18:59 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-15 05:18:59 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-15 05:18:59 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-15 05:18:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-15 05:18:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-15 05:18:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-15 05:18:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-15 05:18:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-15 05:18:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-15 05:18:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-15 05:18:59 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-15 05:18:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 05:18:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 05:18:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 05:18:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 05:18:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 05:18:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 05:18:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 05:19:02 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:19:02.01 2011-Dec-15 05:19:02 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323940742.01 Thu Dec 15 05:19:02 2011 2011-Dec-15 05:19:02 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-15 05:19:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.363452 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-15 05:19:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.363452 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 05:19:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.363452 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 05:19:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.363452 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-15 05:19:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.363452 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 05:19:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.363452 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 05:19:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.363452 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 05:19:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.363452 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-15 05:19:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.363452 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-15 05:19:03 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-15 05:19:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-15 05:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-15 05:19:07 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-15 05:19:08 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-15 05:19:08 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-15 05:19:08 LOG5 end_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2011-Dec-15 05:19:08 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-15 05:19:08 LOG5 end_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2011-Dec-15 05:19:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-15 05:19:08 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-15 05:19:08 LOG5 finish_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2011-Dec-15 05:19:08 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-15 05:19:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 05:19:08 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-15 05:19:08 LOG5 end_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2011-Dec-15 05:19:08 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-15 05:19:08 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 103.27 and ZA = 8.09 2011-Dec-15 05:19:08 LOG3 track_source: Calling 'track_source AGES3193_p3_153 103.27 8.0865904695 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-15 05:19:08 START begin_task: Starting task 'sending tracking commands' 2011-Dec-15 05:19:08 LOG5 begin_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2011-Dec-15 05:19:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_153} INFO {Slewing to source 'AGES3193_p3_153' ...} 2011-Dec-15 05:19:08 INFO1 track_source: Starting to track AGES3193_p3_153 2011-Dec-15 05:19:08 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_153" 2011-Dec-15 05:19:08 LOG3 vw_send: To DATATAKING: set ra 103.27 2011-Dec-15 05:19:08 LOG3 vw_send: To DATATAKING: set dec 8.0865904695 2011-Dec-15 05:19:08 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-15 05:19:08 LOG3 vw_send: To DATATAKING: pnt tr 103.27 8.0865904695 -CF 2011-Dec-15 05:19:08 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 05:19:08 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-15 05:19:08 LOG5 finish_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2011-Dec-15 05:19:08 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-15 05:19:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 05:19:08 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-15 05:19:08 LOG5 end_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2011-Dec-15 05:19:08 LOG1 fixed_driftmap: Parameters: HA = +00:33:31.0 Start = 10:27:12.5 LST = 10:26:50.8 diff = 21.7 secs 2011-Dec-15 05:19:08 INFO2 fixed_driftmap: Waiting 19.7 seconds for RA 9:53:42 2011-Dec-15 05:19:08 INFO2 lstwait: Waiting for 19.6 secs from LST 10:26:51 to LST 10:27:10 ... 2011-Dec-15 05:19:08 LOG4 send_obs_status: To obs_status: <1> TASKTIME 19.646925284707208 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-15 05:19:08 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-15 05:19:08 LOG5 begin_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2011-Dec-15 05:19:08 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_153" 2011-Dec-15 05:19:08 LOG4 got_cormsg: From DATATAKING: set ra 103.27 2011-Dec-15 05:19:08 LOG4 got_cormsg: From DATATAKING: set dec 8.0865904695 2011-Dec-15 05:19:08 LOG4 got_cormsg: From DATATAKING: vw% 103.27 2011-Dec-15 05:19:08 LOG4 got_cormsg: From DATATAKING: vw% 8.0865904695 2011-Dec-15 05:19:08 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 05:19:08 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-15 05:19:08 LOG4 got_cormsg: From DATATAKING: pnt tr 103.27 8.0865904695 -CF 2011-Dec-15 05:19:08 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 05:19:08 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-15 05:19:08 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 05:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-15 05:19:28 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-15 05:19:28 LOG5 end_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2011-Dec-15 05:19:28 LOG4 lstwait: Finished waiting 0.35 seconds late 2011-Dec-15 05:19:28 INFO3 lstwait: Finished waiting 2011-Dec-15 05:19:28 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-15 05:19:28 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-15 05:19:28 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-15 05:19:28 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-15 05:19:28 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-15 05:19:28 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-15 05:19:28 LOG5 begin_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2011-Dec-15 05:19:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-15 05:19:28 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-15 05:19:28 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-15 05:19:28 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-15 05:19:28 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-15 05:19:28 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_153 2011-Dec-15 05:19:28 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-15 05:19:28 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-15 05:19:28 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-15 05:19:28 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-15 05:19:28 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-15 05:19:28 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-15 05:19:28 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-15 05:19:28 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-15 05:19:28 LOG3 take_mock_data: PSET configuration: patternid=134900015 2011-Dec-15 05:19:28 LOG3 take_mock_data: PSET configuration: scanid=134900015 2011-Dec-15 05:19:28 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-15 05:19:28 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-15 05:19:28 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-15 05:19:28 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456363452.0 2011-Dec-15 05:19:28 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306363452.0 2011-Dec-15 05:19:28 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-15 05:19:28 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-15 05:19:28 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_153:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=134900015:scanid=134900015:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456363452.0:topobfreqhz=1306363452.0:filetype=1 2011-Dec-15 05:19:28 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-15 05:19:28 LOG5 begin_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2011-Dec-15 05:19:28 LOG4 from_mock: From MOCK: psetok 2011-Dec-15 05:19:28 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-15 05:19:28 LOG5 end_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2011-Dec-15 05:19:28 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-15 05:19:28 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-15 05:19:28 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-15 05:19:28 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-15 05:19:28 LOG5 begin_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2011-Dec-15 05:19:28 LOG4 from_mock: From MOCK: starok 2011-Dec-15 05:19:28 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-15 05:19:28 LOG5 end_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2011-Dec-15 05:19:28 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-15 05:19:28 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 134900015 2011-Dec-15 05:19:29 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-15 05:19:29 LOG5 begin_task: Level: (4) ID = <10232> Status = 0 0 0 0 ok 2011-Dec-15 05:19:29 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-15 05:19:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-15 05:19:29 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-15 05:19:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-15 05:19:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 33570.00 2011-Dec-15 05:19:30 INFO2 got_mock_message: Mock spectrometer start file number is 01400 2011-Dec-15 05:19:30 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-15 05:19:30 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1199.9 s 2011-Dec-15 05:19:30 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-15 05:19:30 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-15 05:19:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-15 05:19:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-15 05:19:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-15 05:19:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-15 05:19:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-15 05:19:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-15 05:19:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-15 05:19:30 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-15 05:19:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 05:19:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 05:19:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 05:19:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 05:19:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 05:19:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 05:19:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 05:19:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.363452 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-15 05:19:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.363452 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 05:19:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.363452 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 05:19:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.363452 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-15 05:19:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.363452 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 05:19:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.363452 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 05:19:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.363452 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 05:19:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.363452 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-15 05:19:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.363452 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-15 05:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2011-Dec-15 05:19:33 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:19:33.02 2011-Dec-15 05:19:33 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323940773.02 Thu Dec 15 05:19:33 2011 2011-Dec-15 05:19:33 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-15 05:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-15 05:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-15 05:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-15 05:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-15 05:19:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-15 05:19:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.122 1.089 0.900 0.905 2011-Dec-15 05:19:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.920 0.969 1.059 1.117 2011-Dec-15 05:19:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.841 1.121 0.964 0.882 2011-Dec-15 05:19:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.113 0.021 0.967 0.021 2011-Dec-15 05:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-15 05:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2011-Dec-15 05:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2011-Dec-15 05:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2011-Dec-15 05:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2011-Dec-15 05:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-15 05:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-15 05:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2011-Dec-15 05:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-15 05:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-15 05:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-15 05:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-15 05:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-15 05:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-15 05:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-15 05:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-15 05:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-15 05:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-15 05:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-15 05:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2011-Dec-15 05:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-15 05:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-15 05:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-15 05:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-15 05:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-15 05:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-15 05:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-15 05:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2011-Dec-15 05:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-15 05:20:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-15 05:20:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.121 1.086 0.901 0.901 2011-Dec-15 05:20:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.911 0.965 1.059 1.115 2011-Dec-15 05:20:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.840 1.118 0.961 0.879 2011-Dec-15 05:20:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 0.020 0.966 0.020 2011-Dec-15 05:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-15 05:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 05:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-15 05:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-15 05:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-15 05:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-15 05:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-15 05:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-15 05:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-15 05:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-15 05:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-15 05:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-15 05:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-15 05:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-15 05:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-15 05:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-15 05:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-15 05:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2011-Dec-15 05:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2011-Dec-15 05:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-15 05:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2011-Dec-15 05:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2011-Dec-15 05:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-15 05:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-15 05:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-15 05:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-15 05:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-15 05:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-15 05:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-15 05:21:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-15 05:21:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.120 1.085 0.901 0.904 2011-Dec-15 05:21:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 0.966 1.060 1.115 2011-Dec-15 05:21:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.840 1.119 0.964 0.880 2011-Dec-15 05:21:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 0.020 0.965 0.021 2011-Dec-15 05:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 05:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-15 05:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-15 05:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-15 05:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-15 05:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-15 05:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2011-Dec-15 05:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-15 05:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-15 05:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2011-Dec-15 05:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-15 05:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-15 05:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-15 05:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-15 05:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-15 05:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-15 05:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-15 05:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-15 05:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-15 05:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-15 05:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-15 05:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.126 (still bad) 2011-Dec-15 05:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2011-Dec-15 05:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-15 05:22:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-15 05:22:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.119 1.079 0.900 0.903 2011-Dec-15 05:22:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.911 0.963 1.058 1.113 2011-Dec-15 05:22:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.843 1.120 0.977 0.893 2011-Dec-15 05:22:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 0.023 0.964 0.023 2011-Dec-15 05:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2011-Dec-15 05:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-15 05:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2011-Dec-15 05:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-15 05:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-15 05:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-15 05:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-15 05:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-15 05:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2011-Dec-15 05:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-15 05:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-15 05:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-15 05:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-15 05:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-15 05:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-15 05:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-15 05:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-15 05:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-15 05:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-15 05:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2011-Dec-15 05:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2011-Dec-15 05:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-15 05:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-15 05:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-15 05:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-15 05:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-15 05:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2011-Dec-15 05:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-15 05:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2011-Dec-15 05:23:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-15 05:23:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.116 1.072 0.898 0.898 2011-Dec-15 05:23:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.909 0.962 1.061 1.112 2011-Dec-15 05:23:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.839 1.113 0.961 0.877 2011-Dec-15 05:23:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 0.022 0.965 0.023 2011-Dec-15 05:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-15 05:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-15 05:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-15 05:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-15 05:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2011-Dec-15 05:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-15 05:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-15 05:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-15 05:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2011-Dec-15 05:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-15 05:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2011-Dec-15 05:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.114 (still bad) 2011-Dec-15 05:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2011-Dec-15 05:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-15 05:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2011-Dec-15 05:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2011-Dec-15 05:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2011-Dec-15 05:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-15 05:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2011-Dec-15 05:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-15 05:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-15 05:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-15 05:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2011-Dec-15 05:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2011-Dec-15 05:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.139 (still bad) 2011-Dec-15 05:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.148 (still bad) 2011-Dec-15 05:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.153 (still bad) 2011-Dec-15 05:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.153 (still bad) 2011-Dec-15 05:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.151 (still bad) 2011-Dec-15 05:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.142 (still bad) 2011-Dec-15 05:24:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2011-Dec-15 05:24:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.116 1.074 0.898 0.900 2011-Dec-15 05:24:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.913 0.965 1.059 1.111 2011-Dec-15 05:24:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.848 1.136 0.961 0.875 2011-Dec-15 05:24:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 0.019 0.966 0.020 2011-Dec-15 05:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2011-Dec-15 05:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2011-Dec-15 05:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-15 05:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-15 05:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-15 05:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2011-Dec-15 05:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.131 (still bad) 2011-Dec-15 05:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-15 05:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-15 05:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2011-Dec-15 05:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-15 05:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-15 05:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-15 05:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-15 05:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-15 05:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-15 05:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-15 05:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-15 05:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-15 05:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-15 05:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-15 05:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 05:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-15 05:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-15 05:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-15 05:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-15 05:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-15 05:25:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-15 05:25:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.115 1.074 0.898 0.897 2011-Dec-15 05:25:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.906 0.959 1.057 1.110 2011-Dec-15 05:25:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.835 1.111 0.961 0.877 2011-Dec-15 05:25:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.112 0.020 0.969 0.020 2011-Dec-15 05:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-15 05:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-15 05:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-15 05:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2011-Dec-15 05:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2011-Dec-15 05:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-15 05:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-15 05:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2011-Dec-15 05:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-15 05:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-15 05:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-15 05:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-15 05:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-15 05:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-15 05:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2011-Dec-15 05:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-15 05:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-15 05:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-15 05:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-15 05:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-15 05:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-15 05:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-15 05:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-15 05:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-15 05:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-15 05:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-15 05:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-15 05:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-15 05:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-15 05:26:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-15 05:26:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.118 1.072 0.899 0.898 2011-Dec-15 05:26:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.907 0.958 1.057 1.111 2011-Dec-15 05:26:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.842 1.117 0.985 0.900 2011-Dec-15 05:26:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.114 0.021 0.967 0.022 2011-Dec-15 05:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2011-Dec-15 05:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2011-Dec-15 05:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-15 05:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.130 (still bad) 2011-Dec-15 05:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.143 (still bad) 2011-Dec-15 05:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.158 (still bad) 2011-Dec-15 05:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.159 (still bad) 2011-Dec-15 05:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.160 (still bad) 2011-Dec-15 05:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.164 (still bad) 2011-Dec-15 05:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.155 (still bad) 2011-Dec-15 05:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.150 (still bad) 2011-Dec-15 05:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.147 (still bad) 2011-Dec-15 05:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-15 05:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.126 (still bad) 2011-Dec-15 05:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-15 05:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-15 05:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-15 05:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2011-Dec-15 05:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2011-Dec-15 05:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-15 05:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-15 05:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-15 05:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-15 05:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2011-Dec-15 05:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-15 05:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-15 05:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-15 05:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-15 05:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-15 05:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-15 05:27:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-15 05:27:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.121 1.072 0.899 0.900 2011-Dec-15 05:27:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 0.964 1.062 1.115 2011-Dec-15 05:27:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.837 1.112 0.963 0.879 2011-Dec-15 05:27:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.112 0.020 0.969 0.020 2011-Dec-15 05:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-15 05:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-15 05:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-15 05:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-15 05:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-15 05:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-15 05:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-15 05:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-15 05:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-15 05:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-15 05:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2011-Dec-15 05:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2011-Dec-15 05:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2011-Dec-15 05:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2011-Dec-15 05:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2011-Dec-15 05:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2011-Dec-15 05:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2011-Dec-15 05:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2011-Dec-15 05:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2011-Dec-15 05:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-15 05:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-15 05:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2011-Dec-15 05:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-15 05:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2011-Dec-15 05:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-15 05:28:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-15 05:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2011-Dec-15 05:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2011-Dec-15 05:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2011-Dec-15 05:28:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2011-Dec-15 05:28:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.122 1.074 0.900 0.899 2011-Dec-15 05:28:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.910 0.960 1.060 1.114 2011-Dec-15 05:28:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.840 1.115 0.966 0.882 2011-Dec-15 05:28:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.110 0.019 0.967 0.020 2011-Dec-15 05:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2011-Dec-15 05:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2011-Dec-15 05:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2011-Dec-15 05:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2011-Dec-15 05:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2011-Dec-15 05:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-15 05:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2011-Dec-15 05:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2011-Dec-15 05:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2011-Dec-15 05:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2011-Dec-15 05:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-15 05:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-15 05:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-15 05:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-15 05:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-15 05:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2011-Dec-15 05:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-15 05:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2011-Dec-15 05:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2011-Dec-15 05:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2011-Dec-15 05:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.141 (still bad) 2011-Dec-15 05:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.148 (still bad) 2011-Dec-15 05:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2011-Dec-15 05:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2011-Dec-15 05:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2011-Dec-15 05:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-15 05:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-15 05:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2011-Dec-15 05:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-15 05:29:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-15 05:29:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.119 1.071 0.900 0.900 2011-Dec-15 05:29:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.909 0.960 1.064 1.120 2011-Dec-15 05:29:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.838 1.114 0.966 0.881 2011-Dec-15 05:29:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.113 0.020 0.969 0.020 2011-Dec-15 05:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-15 05:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-15 05:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2011-Dec-15 05:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2011-Dec-15 05:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-15 05:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-15 05:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-15 05:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-15 05:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-15 05:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-15 05:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-15 05:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-15 05:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-15 05:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-15 05:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-15 05:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-15 05:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-15 05:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-15 05:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-15 05:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-15 05:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-15 05:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-15 05:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-15 05:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-15 05:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-15 05:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-15 05:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-15 05:30:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-15 05:30:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.122 1.068 0.903 0.902 2011-Dec-15 05:30:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.912 0.960 1.061 1.117 2011-Dec-15 05:30:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.839 1.115 0.966 0.880 2011-Dec-15 05:30:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.113 0.020 0.970 0.020 2011-Dec-15 05:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-15 05:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-15 05:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-15 05:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-15 05:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-15 05:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-15 05:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-15 05:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-15 05:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-15 05:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-15 05:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-15 05:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-15 05:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-15 05:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-15 05:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-15 05:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-15 05:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:31:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-15 05:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-15 05:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 05:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-15 05:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-15 05:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-15 05:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-15 05:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 05:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-15 05:31:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-15 05:31:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.118 1.067 0.901 0.898 2011-Dec-15 05:31:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.906 0.954 1.052 1.112 2011-Dec-15 05:31:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.837 1.110 0.966 0.879 2011-Dec-15 05:31:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.110 0.020 0.968 0.020 2011-Dec-15 05:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 05:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-15 05:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-15 05:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-15 05:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-15 05:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-15 05:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-15 05:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 05:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 05:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-15 05:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 05:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 05:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 05:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 05:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-15 05:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-15 05:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 05:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-15 05:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-15 05:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 05:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-15 05:33:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-15 05:33:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.117 1.063 0.898 0.897 2011-Dec-15 05:33:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.905 0.954 1.051 1.109 2011-Dec-15 05:33:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.837 1.112 0.962 0.877 2011-Dec-15 05:33:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.110 0.020 0.967 0.020 2011-Dec-15 05:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 05:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-15 05:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-15 05:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-15 05:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-15 05:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-15 05:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-15 05:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-15 05:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-15 05:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-15 05:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-15 05:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-15 05:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-15 05:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-15 05:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-15 05:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-15 05:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-15 05:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-15 05:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2011-Dec-15 05:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-15 05:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-15 05:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-15 05:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-15 05:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2011-Dec-15 05:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-15 05:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-15 05:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-15 05:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-15 05:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-15 05:34:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-15 05:34:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.117 1.063 0.902 0.900 2011-Dec-15 05:34:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.907 0.955 1.054 1.110 2011-Dec-15 05:34:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.836 1.110 0.962 0.879 2011-Dec-15 05:34:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.113 0.022 0.968 0.022 2011-Dec-15 05:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2011-Dec-15 05:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-15 05:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-15 05:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2011-Dec-15 05:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-15 05:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-15 05:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2011-Dec-15 05:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-15 05:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-15 05:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-15 05:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-15 05:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-15 05:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-15 05:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 05:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-15 05:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-15 05:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-15 05:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-15 05:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-15 05:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-15 05:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-15 05:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2011-Dec-15 05:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-15 05:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-15 05:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-15 05:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 05:35:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-15 05:35:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.117 1.065 0.901 0.896 2011-Dec-15 05:35:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.906 0.956 1.053 1.111 2011-Dec-15 05:35:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.837 1.110 0.962 0.878 2011-Dec-15 05:35:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.112 0.020 0.968 0.021 2011-Dec-15 05:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-15 05:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 05:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-15 05:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 05:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 05:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-15 05:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-15 05:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 05:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-15 05:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 05:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-15 05:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-15 05:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-15 05:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-15 05:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-15 05:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-15 05:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-15 05:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-15 05:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-15 05:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-15 05:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-15 05:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-15 05:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-15 05:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-15 05:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-15 05:36:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 05:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-15 05:36:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-15 05:36:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.124 1.070 0.904 0.901 2011-Dec-15 05:36:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.911 0.959 1.057 1.116 2011-Dec-15 05:36:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.838 1.116 0.965 0.882 2011-Dec-15 05:36:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.119 0.020 0.974 0.020 2011-Dec-15 05:36:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-15 05:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-15 05:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-15 05:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 05:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-15 05:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-15 05:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-15 05:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-15 05:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-15 05:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-15 05:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2011-Dec-15 05:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-15 05:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2011-Dec-15 05:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2011-Dec-15 05:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-15 05:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-15 05:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-15 05:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-15 05:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-15 05:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2011-Dec-15 05:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-15 05:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2011-Dec-15 05:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2011-Dec-15 05:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2011-Dec-15 05:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2011-Dec-15 05:37:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2011-Dec-15 05:37:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.123 1.067 0.918 0.916 2011-Dec-15 05:37:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.910 0.963 1.059 1.117 2011-Dec-15 05:37:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.839 1.114 0.965 0.880 2011-Dec-15 05:37:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.123 0.019 0.976 0.020 2011-Dec-15 05:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-15 05:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-15 05:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2011-Dec-15 05:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2011-Dec-15 05:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-15 05:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-15 05:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-15 05:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-15 05:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-15 05:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-15 05:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-15 05:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-15 05:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-15 05:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2011-Dec-15 05:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2011-Dec-15 05:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2011-Dec-15 05:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2011-Dec-15 05:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-15 05:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2011-Dec-15 05:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2011-Dec-15 05:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2011-Dec-15 05:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2011-Dec-15 05:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2011-Dec-15 05:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-15 05:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-15 05:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-15 05:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-15 05:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-15 05:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-15 05:38:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-15 05:38:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.119 1.063 0.903 0.900 2011-Dec-15 05:38:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.907 0.962 1.054 1.113 2011-Dec-15 05:38:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.837 1.113 0.967 0.881 2011-Dec-15 05:38:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.116 0.021 0.971 0.022 2011-Dec-15 05:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-15 05:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-15 05:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-15 05:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-15 05:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-15 05:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-15 05:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-15 05:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-15 05:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-15 05:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-15 05:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-15 05:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-15 05:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-15 05:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-15 05:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-15 05:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2011-Dec-15 05:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-15 05:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-15 05:38:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-15 05:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 05:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-15 05:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2011-Dec-15 05:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 05:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-15 05:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 05:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-15 05:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-15 05:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-15 05:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 05:39:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-15 05:39:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.116 1.060 0.899 0.895 2011-Dec-15 05:39:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.906 0.960 1.050 1.110 2011-Dec-15 05:39:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.835 1.112 0.962 0.877 2011-Dec-15 05:39:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 0.020 0.966 0.020 2011-Dec-15 05:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-15 05:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-15 05:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-15 05:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-15 05:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-15 05:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-15 05:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-15 05:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-15 05:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-15 05:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-15 05:39:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-15 05:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-15 05:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-15 05:39:34 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-15 05:39:34 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-15 05:39:34 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-15 05:39:34 LOG5 end_task: Level: (4) ID = <10232> Status = 0 0 0 0 ok 2011-Dec-15 05:39:34 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-15 05:39:34 LOG5 end_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2011-Dec-15 05:39:34 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-15 05:39:34 LOG5 finish_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2011-Dec-15 05:39:34 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-15 05:39:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-15 05:39:34 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-15 05:39:34 LOG5 end_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2011-Dec-15 05:39:34 COMMAND run_command_line: EXECUTING command 41: 'ENDIF' 2011-Dec-15 05:39:34 COMMAND run_command_line: EXECUTING command 44: 'IF LSTSLEW(AGES3193_p3_155) < 105040 THEN' 2011-Dec-15 05:39:34 LOG3 is_if_valid: Current source data: up 459.5 12.8 UP - - 29 2.0 2011-Dec-15 05:39:34 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_155) < 105040 2011-Dec-15 05:39:34 INFO5 is_if_valid: Condition parsed as: 10.822262333333333 < 10.844444444444445 2011-Dec-15 05:39:34 COMMAND run_command_line: EXECUTING command 45: 'FIXEDDRIFT az=99.17 alfaangle=-76.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_155 ra=95300.00 dec=200200.00' 2011-Dec-15 05:39:34 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-15 05:39:35 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-15 05:39:35 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 99.17 -76.1 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_155 95300.00 200200.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-15 05:39:35 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-15 05:39:35 LOG5 begin_task: Level: (2) ID = <10233> Status = 0 0 0 0 ok 2011-Dec-15 05:39:35 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_153' 2011-Dec-15 05:39:35 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-15 05:39:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_155} 2011-Dec-15 05:39:35 INFO3 fixed_driftmap: Sending telescope to Az = 99.17 and ZA = 13.57 2011-Dec-15 05:39:35 LOG3 track_source: Calling 'track_source AGES3193_p3_155 99.17 13.5668978637 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-15 05:39:35 START begin_task: Starting task 'sending tracking commands' 2011-Dec-15 05:39:35 LOG5 begin_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2011-Dec-15 05:39:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_155} INFO {Slewing to source 'AGES3193_p3_155' ...} 2011-Dec-15 05:39:35 INFO1 track_source: Starting to track AGES3193_p3_155 2011-Dec-15 05:39:35 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_155" 2011-Dec-15 05:39:35 LOG3 vw_send: To DATATAKING: set ra 99.17 2011-Dec-15 05:39:35 LOG3 vw_send: To DATATAKING: set dec 13.5668978637 2011-Dec-15 05:39:35 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-15 05:39:35 LOG3 vw_send: To DATATAKING: pnt tr 99.17 13.5668978637 -CF 2011-Dec-15 05:39:35 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 05:39:35 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-15 05:39:35 LOG5 finish_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2011-Dec-15 05:39:35 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-15 05:39:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 05:39:35 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-15 05:39:35 LOG5 end_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2011-Dec-15 05:39:35 START begin_task: Starting task 'rotate ALFA to -76.1 degrees' 2011-Dec-15 05:39:35 LOG5 begin_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2011-Dec-15 05:39:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -76.1 degrees ...} 2011-Dec-15 05:39:35 INFO2 rotate_alfa: ALFA commanded to -76.1 degrees 2011-Dec-15 05:39:35 LOG3 sock_errsend: To ALFAMOTOR: POSITION -76.1 REPLY 2011-Dec-15 05:39:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-15 05:39:35 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-15 05:39:35 LOG5 begin_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2011-Dec-15 05:39:35 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_155" 2011-Dec-15 05:39:35 LOG4 got_cormsg: From DATATAKING: set ra 99.17 2011-Dec-15 05:39:35 LOG4 got_cormsg: From DATATAKING: set dec 13.5668978637 2011-Dec-15 05:39:35 LOG4 got_cormsg: From DATATAKING: vw% 99.17 2011-Dec-15 05:39:35 LOG4 got_cormsg: From DATATAKING: vw% 13.5668978637 2011-Dec-15 05:39:35 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 05:39:35 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-15 05:39:35 LOG4 got_cormsg: From DATATAKING: pnt tr 99.17 13.5668978637 -CF 2011-Dec-15 05:39:35 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 05:39:35 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-15 05:39:35 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 05:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-15 05:39:40 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-15 05:39:40 INFO3 alfa_motor: ALFA rotator in-position -76.10 degrees 2011-Dec-15 05:39:40 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-15 05:39:40 LOG5 end_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2011-Dec-15 05:39:40 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-15 05:39:40 STOP finish_task: Finishing task 'rotate ALFA to -76.1 degrees' 2011-Dec-15 05:39:40 LOG5 finish_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2011-Dec-15 05:39:40 INFO2 finish_task: DONE finished configuration: rotating ALFA to -76.1 degrees 2011-Dec-15 05:39:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 05:39:40 STOP end_task: Finishing task 'rotate ALFA to -76.1 degrees' with status 'OK' 2011-Dec-15 05:39:40 LOG5 end_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2011-Dec-15 05:39:40 START begin_task: Starting task 'waiting on telescope' 2011-Dec-15 05:39:40 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2011-Dec-15 05:39:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-15 05:39:40 LOG3 waittrk: Start waittrk 5 2011-Dec-15 05:39:40 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-15 05:39:40 LOG5 begin_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2011-Dec-15 05:39:45 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-15 05:39:45 LOG5 end_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2011-Dec-15 05:39:45 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-15 05:39:45 LOG5 begin_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2011-Dec-15 05:41:58 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-15 05:41:58 LOG5 end_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2011-Dec-15 05:41:58 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-15 05:41:58 INFO2 waittrk: Now tracking AGES3193_p3_155 2011-Dec-15 05:41:58 LOG4 waittrk: Current telescope position: Az = 458.92 ZA = 13.57 2011-Dec-15 05:41:58 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-15 05:41:58 LOG5 finish_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2011-Dec-15 05:41:58 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-15 05:41:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 05:41:58 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-15 05:41:58 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2011-Dec-15 05:41:58 START begin_task: Starting task 'selecting calibration type' 2011-Dec-15 05:41:58 LOG5 begin_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2011-Dec-15 05:41:58 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-15 05:41:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-15 05:41:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 05:41:58 START begin_task: Starting task 'waiting on setcal' 2011-Dec-15 05:41:58 LOG5 begin_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2011-Dec-15 05:41:58 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-15 05:41:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 05:41:59 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 05:41:59 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-15 05:41:59 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-15 05:41:59 LOG5 end_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2011-Dec-15 05:41:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-15 05:41:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-15 05:41:59 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-15 05:41:59 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-15 05:41:59 LOG5 begin_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2011-Dec-15 05:41:59 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 05:41:59 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-15 05:41:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-15 05:41:59 LOG5 end_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2011-Dec-15 05:41:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-15 05:41:59 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-15 05:41:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-15 05:41:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-15 05:41:59 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-15 05:41:59 LOG5 begin_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2011-Dec-15 05:41:59 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-15 05:41:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-15 05:41:59 LOG5 end_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2011-Dec-15 05:41:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-15 05:41:59 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-15 05:41:59 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-15 05:41:59 LOG5 end_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2011-Dec-15 05:41:59 LOG5 dopset_later: Calling 'dopset_later 58.339120232299763' 2011-Dec-15 05:41:59 INFO3 dopset_later: Setting Doppler correction for 05:42:57 (58.3 seconds from now) 2011-Dec-15 05:41:59 LOG5 antvel: Calling 'antvel 99.170000 13.566898 F Heliocentric 58.339120232299763' 2011-Dec-15 05:41:59 LOG2 antvel: Transforming current Az = 99.17 ZA = 13.57 to apparent RA = 09:53:41.3 Dec = +19:58:23.3 2011-Dec-15 05:41:59 LOG2 antvel: Parameters to Doppler: Heliocentric 34977 2011 349 0.0 2011-Dec-15 05:41:59 INFO5 antvel: Computed antenna velocity: -26.00941 km/s 2011-Dec-15 05:41:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-26.009414002 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-15 05:41:59 INFO4 dopset_gen: New sky frequencies: 1381.363273 1381.363273 1381.363273 1381.363273 1381.363273 1381.363273 1381.363273 1381.363273 1381.363273 2011-Dec-15 05:41:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.363273 sky0=1381.363273 sky1=1381.363273 sky2=1381.363273 sky3=1381.363273 sky4=1381.363273 sky5=1381.363273 sky6=1381.363273 sky7=1381.363273 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-15 05:41:59 LOG2 dopset_gen: Result from 'sky2syn': 1631.363273 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-15 05:41:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631363273.0} 2011-Dec-15 05:41:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 05:41:59 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-15 05:41:59 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-15 05:41:59 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:06.2 Dec = +20:01:46.8 2011-Dec-15 05:41:59 LOG3 track_source: Calling 'track_source AGES3193_p3_155 095206.2 200146.8 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-15 05:41:59 START begin_task: Starting task 'sending tracking commands' 2011-Dec-15 05:41:59 LOG5 begin_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2011-Dec-15 05:41:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_155} INFO {Slewing to source 'AGES3193_p3_155' ...} 2011-Dec-15 05:41:59 INFO1 track_source: Starting to track AGES3193_p3_155 2011-Dec-15 05:41:59 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_155" 2011-Dec-15 05:41:59 LOG3 vw_send: To DATATAKING: set ra 095206.2 2011-Dec-15 05:41:59 LOG3 vw_send: To DATATAKING: set dec 200146.8 2011-Dec-15 05:41:59 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-15 05:41:59 LOG3 vw_send: To DATATAKING: pnt tr 095206.2 200146.8 -CJ 2011-Dec-15 05:42:00 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 05:42:00 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-15 05:42:00 LOG5 finish_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2011-Dec-15 05:42:00 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-15 05:42:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 05:42:00 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-15 05:42:00 LOG5 end_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2011-Dec-15 05:42:00 START begin_task: Starting task 'waiting on telescope' 2011-Dec-15 05:42:00 LOG5 begin_task: Level: (3) ID = <10245> Status = 0 0 0 0 ok 2011-Dec-15 05:42:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-15 05:42:00 LOG3 waittrk: Start waittrk 5 2011-Dec-15 05:42:00 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-15 05:42:00 LOG5 begin_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2011-Dec-15 05:42:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631363273.0} 2011-Dec-15 05:42:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 05:42:00 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-15 05:42:00 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_155" 2011-Dec-15 05:42:00 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 05:42:00 LOG4 got_cormsg: From DATATAKING: set ra 095206.2 2011-Dec-15 05:42:00 LOG4 got_cormsg: From DATATAKING: set dec 200146.8 2011-Dec-15 05:42:00 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-15 05:42:00 LOG4 got_cormsg: From DATATAKING: pnt tr 095206.2 200146.8 -CJ 2011-Dec-15 05:42:00 LOG4 got_cormsg: From DATATAKING: 095206.2 2011-Dec-15 05:42:00 LOG4 got_cormsg: From DATATAKING: vw% 200146.8 2011-Dec-15 05:42:00 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2011-Dec-15 05:42:00 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 05:42:00 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 05:42:05 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-15 05:42:05 LOG5 end_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2011-Dec-15 05:42:05 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-15 05:42:05 LOG5 begin_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2011-Dec-15 05:42:08 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-15 05:42:08 LOG5 end_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2011-Dec-15 05:42:08 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-15 05:42:08 INFO2 waittrk: Now tracking AGES3193_p3_155 2011-Dec-15 05:42:08 LOG4 waittrk: Current telescope position: Az = 458.89 ZA = 13.60 2011-Dec-15 05:42:08 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-15 05:42:08 LOG5 finish_task: Level: (3) ID = <10245> Status = 0 0 0 0 ok 2011-Dec-15 05:42:08 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-15 05:42:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 05:42:08 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-15 05:42:08 LOG5 end_task: Level: (3) ID = <10245> Status = 0 0 0 0 ok 2011-Dec-15 05:42:08 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-15 05:42:08 LOG5 begin_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2011-Dec-15 05:42:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-15 05:42:08 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-15 05:42:08 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-15 05:42:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-15 05:42:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 05:42:08 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-15 05:42:08 LOG5 begin_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2011-Dec-15 05:42:08 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-15 05:42:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 05:42:11 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 05:42:11 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-15 05:42:11 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-15 05:42:11 LOG5 end_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2011-Dec-15 05:42:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-15 05:42:11 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-15 05:42:11 LOG5 begin_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2011-Dec-15 05:42:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-15 05:42:11 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-15 05:42:11 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-15 05:42:11 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-15 05:42:11 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-15 05:42:11 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-15 05:42:11 LOG5 begin_task: Level: (5) ID = <10251> Status = 0 0 0 0 ok 2011-Dec-15 05:42:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-15 05:42:11 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 05:42:11 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 8 6 dB 2011-Dec-15 05:42:11 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 3 4 dB 2011-Dec-15 05:42:11 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 3 dB 2011-Dec-15 05:42:12 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2011-Dec-15 05:42:12 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-15 05:42:12 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-15 05:42:12 LOG5 end_task: Level: (5) ID = <10251> Status = 0 0 0 0 ok 2011-Dec-15 05:42:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.913 1.088 ALFA beam 1: 0.925 0.917 2011-Dec-15 05:42:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.925 0.972 ALFA beam 3: 1.070 0.897 2011-Dec-15 05:42:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.851 0.917 ALFA beam 5: 1.019 0.924 2011-Dec-15 05:42:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.922 0.014 ALFA beam 7: 1.005 0.014 2011-Dec-15 05:42:12 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-15 05:42:12 LOG5 finish_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2011-Dec-15 05:42:12 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-15 05:42:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 05:42:12 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-15 05:42:12 LOG5 end_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2011-Dec-15 05:42:12 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-15 05:42:12 LOG5 begin_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2011-Dec-15 05:42:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-15 05:42:12 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-15 05:42:12 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-15 05:42:12 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-15 05:42:12 LOG5 begin_task: Level: (5) ID = <10253> Status = 0 0 0 0 ok 2011-Dec-15 05:42:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-15 05:42:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.913 1.088 0.925 0.917 2011-Dec-15 05:42:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 0.972 1.070 0.897 2011-Dec-15 05:42:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.851 0.917 1.019 0.924 2011-Dec-15 05:42:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.014 1.005 0.014 2011-Dec-15 05:42:17 INFO3 from_mock: From MOCK: b0s0g0 rms:A 32.2 28.3 B 30.5 30.6 mn:A 0.2 0.0 B -0.3 -0.3 gn: 11 11 2011-Dec-15 05:42:17 INFO3 from_mock: From MOCK: b0s1g0 rms:A 28.8 27.6 B 28.4 30.1 mn:A 0.2 -0.5 B -0.4 0.2 gn: 11 11 2011-Dec-15 05:42:17 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.9 28.9 B 32.9 28.8 mn:A 0.7 0.7 B 0.2 0.0 gn: 7 11 2011-Dec-15 05:42:18 INFO3 from_mock: From MOCK: b1s1g0 rms:A 30.5 28.1 B 31.4 31.4 mn:A -0.3 -0.3 B 0.5 0.1 gn: 8 10 2011-Dec-15 05:42:18 INFO3 from_mock: From MOCK: b2s0g0 rms:A 28.8 27.9 B 28.0 29.2 mn:A 0.1 -0.4 B 0.4 0.0 gn: 10 11 2011-Dec-15 05:42:18 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.7 30.0 B 32.6 30.2 mn:A 0.1 -0.3 B 0.1 0.2 gn: 11 12 2011-Dec-15 05:42:18 INFO3 from_mock: From MOCK: b3s0g0 rms:A 29.1 28.9 B 31.3 27.9 mn:A 0.3 -0.3 B -0.1 -0.2 gn: 12 12 2011-Dec-15 05:42:18 INFO3 from_mock: From MOCK: b3s1g0 rms:A 31.0 30.3 B 30.1 31.3 mn:A -0.3 0.2 B 0.1 0.2 gn: 12 12 2011-Dec-15 05:42:18 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.7 29.8 B 28.7 28.8 mn:A -0.2 -0.3 B -0.4 0.0 gn: 13 11 2011-Dec-15 05:42:18 INFO3 from_mock: From MOCK: b4s1g0 rms:A 32.8 29.7 B 31.2 30.1 mn:A -0.1 0.0 B -0.5 0.4 gn: 16 13 2011-Dec-15 05:42:18 INFO3 from_mock: From MOCK: b5s0g0 rms:A 30.4 29.3 B 28.6 28.6 mn:A 0.5 0.4 B -0.0 0.5 gn: 12 10 2011-Dec-15 05:42:18 INFO3 from_mock: From MOCK: b5s1g0 rms:A 30.6 30.4 B 28.7 28.5 mn:A -0.4 0.3 B -0.1 0.1 gn: 12 10 2011-Dec-15 05:42:18 INFO3 from_mock: From MOCK: b6s0g0 rms:A 29.8 27.3 B 14.1 14.5 mn:A -0.4 0.2 B 0.3 -0.4 gn: 12 31 2011-Dec-15 05:42:18 INFO3 from_mock: From MOCK: b6s1g0 rms:A 30.6 27.8 B 11.1 10.8 mn:A 0.6 0.6 B 0.1 0.3 gn: 13 31 2011-Dec-15 05:42:18 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-15 05:42:18 LOG5 end_task: Level: (5) ID = <10253> Status = 0 0 0 0 ok 2011-Dec-15 05:42:18 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-15 05:42:18 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-15 05:42:18 LOG5 finish_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2011-Dec-15 05:42:18 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-15 05:42:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 05:42:18 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-15 05:42:18 LOG5 end_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2011-Dec-15 05:42:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-15 05:42:18 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-15 05:42:18 LOG5 finish_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2011-Dec-15 05:42:18 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-15 05:42:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 05:42:18 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-15 05:42:18 LOG5 end_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2011-Dec-15 05:42:18 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2011-Dec-15 05:42:18 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2011-Dec-15 05:42:18 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2011-Dec-15 05:42:18 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2011-Dec-15 05:42:18 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-15 05:42:18 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-15 05:42:18 LOG5 begin_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2011-Dec-15 05:42:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-15 05:42:18 START begin_task: Starting task 'selecting calibration type' 2011-Dec-15 05:42:18 LOG5 begin_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2011-Dec-15 05:42:18 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-15 05:42:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-15 05:42:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 05:42:18 START begin_task: Starting task 'waiting on setcal' 2011-Dec-15 05:42:18 LOG5 begin_task: Level: (5) ID = <10256> Status = 0 0 0 0 ok 2011-Dec-15 05:42:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2011-Dec-15 05:42:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-15 05:42:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 05:42:18 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 05:42:18 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-15 05:42:18 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-15 05:42:18 LOG5 end_task: Level: (5) ID = <10256> Status = 0 0 0 0 ok 2011-Dec-15 05:42:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-15 05:42:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-15 05:42:18 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-15 05:42:18 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-15 05:42:18 LOG5 begin_task: Level: (5) ID = <10257> Status = 0 0 0 0 ok 2011-Dec-15 05:42:18 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 05:42:18 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-15 05:42:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-15 05:42:18 LOG5 end_task: Level: (5) ID = <10257> Status = 0 0 0 0 ok 2011-Dec-15 05:42:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-15 05:42:18 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-15 05:42:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-15 05:42:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-15 05:42:18 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-15 05:42:18 LOG5 begin_task: Level: (5) ID = <10258> Status = 0 0 0 0 ok 2011-Dec-15 05:42:19 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-15 05:42:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-15 05:42:19 LOG5 end_task: Level: (5) ID = <10258> Status = 0 0 0 0 ok 2011-Dec-15 05:42:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-15 05:42:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-15 05:42:19 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-15 05:42:19 LOG5 end_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2011-Dec-15 05:42:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-15 05:42:19 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-15 05:42:19 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-15 05:42:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-15 05:42:19 LOG5 begin_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2011-Dec-15 05:42:19 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-15 05:42:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-15 05:42:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-15 05:42:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-15 05:42:19 LOG5 end_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2011-Dec-15 05:42:19 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-15 05:42:19 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-15 05:42:19 LOG5 begin_task: Level: (4) ID = <10260> Status = 0 0 0 0 ok 2011-Dec-15 05:42:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-15 05:42:19 LOG5 log_alfabeam: Parameters: 9.8683888888888891 20.029666666666664 10.834888 2011.9561607346566 -76.100021 2011-Dec-15 05:42:19 LOG4 log_alfabeam: ALFABEAM 0 9.868388888888891 20.029666666666667 2011-Dec-15 05:42:19 LOG4 log_alfabeam: ALFABEAM 1 9.866792257433971 20.119654766254190 2011-Dec-15 05:42:19 LOG4 log_alfabeam: ALFABEAM 2 9.861182909032625 20.059606209702430 2011-Dec-15 05:42:19 LOG4 log_alfabeam: ALFABEAM 3 9.862809909581108 19.969271094600874 2011-Dec-15 05:42:19 LOG4 log_alfabeam: ALFABEAM 4 9.870024979227040 19.940005708405870 2011-Dec-15 05:42:19 LOG4 log_alfabeam: ALFABEAM 5 9.875596366167294 19.999985201276360 2011-Dec-15 05:42:19 LOG4 log_alfabeam: ALFABEAM 6 9.873990424223191 20.089299623954282 2011-Dec-15 05:42:19 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-15 05:42:19 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-15 05:42:19 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-15 05:42:19 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_155 2011-Dec-15 05:42:19 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-15 05:42:19 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-15 05:42:19 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-15 05:42:19 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-15 05:42:19 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-15 05:42:19 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-15 05:42:19 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-15 05:42:19 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-15 05:42:19 LOG3 take_mock_data: PSET configuration: patternid=134900015 2011-Dec-15 05:42:19 LOG3 take_mock_data: PSET configuration: scanid=134900016 2011-Dec-15 05:42:19 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-15 05:42:19 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-15 05:42:19 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-15 05:42:19 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456363273.0 2011-Dec-15 05:42:19 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306363273.0 2011-Dec-15 05:42:19 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-15 05:42:19 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-15 05:42:19 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_155:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=134900015:scanid=134900016:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456363273.0:topobfreqhz=1306363273.0:filetype=1 2011-Dec-15 05:42:19 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-15 05:42:19 LOG5 begin_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2011-Dec-15 05:42:19 LOG4 from_mock: From MOCK: psetok 2011-Dec-15 05:42:19 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-15 05:42:19 LOG5 end_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2011-Dec-15 05:42:19 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-15 05:42:19 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-15 05:42:19 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-15 05:42:19 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-15 05:42:19 LOG5 begin_task: Level: (5) ID = <10262> Status = 0 0 0 0 ok 2011-Dec-15 05:42:19 NOTE WAPPDATA-new_file: New FITS file: wapp.20111215.a2048.0006.fits 2011-Dec-15 05:42:19 LOG4 from_mock: From MOCK: starok 2011-Dec-15 05:42:19 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-15 05:42:19 LOG5 end_task: Level: (5) ID = <10262> Status = 0 0 0 0 ok 2011-Dec-15 05:42:19 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-15 05:42:19 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134900016 2011-Dec-15 05:42:19 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-15 05:42:19 LOG5 begin_task: Level: (5) ID = <10263> Status = 0 0 0 0 ok 2011-Dec-15 05:42:19 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111215.a2048.0006.fits} 2011-Dec-15 05:42:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-15 05:42:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-15 05:42:19 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-15 05:42:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 34940.00 2011-Dec-15 05:42:19 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-15 05:42:21 INFO2 got_mock_message: Mock spectrometer start file number is 01500 2011-Dec-15 05:42:21 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-15 05:42:21 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-15 05:42:21 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-15 05:42:21 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-15 05:42:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-15 05:42:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-15 05:42:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-15 05:42:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-15 05:42:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-15 05:42:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-15 05:42:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-15 05:42:22 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-15 05:42:22 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 05:42:22 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 05:42:22 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 05:42:22 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 05:42:22 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 05:42:22 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 05:42:22 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 05:42:25 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:42:25.01 2011-Dec-15 05:42:25 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323942145.01 Thu Dec 15 05:42:25 2011 2011-Dec-15 05:42:25 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-15 05:42:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.363273 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-15 05:42:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.363273 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 05:42:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.363273 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 05:42:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.363273 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-15 05:42:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.363273 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 05:42:25 LOG3 WAPP=2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.363273 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 05:42:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.363273 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 05:42:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.363273 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-15 05:42:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.363273 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-15 05:42:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-15 05:42:25 LOG3 WAPP=1-save_rfcalc: Channel 5: Sky freq = 1381.363273 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 05:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.474 (still bad) 2011-Dec-15 05:42:31 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-15 05:42:31 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-15 05:42:31 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-15 05:42:31 LOG5 end_task: Level: (5) ID = <10263> Status = 0 0 0 0 ok 2011-Dec-15 05:42:31 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-15 05:42:31 LOG5 end_task: Level: (4) ID = <10260> Status = 0 0 0 0 ok 2011-Dec-15 05:42:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-15 05:42:31 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-15 05:42:31 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-15 05:42:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-15 05:42:31 LOG5 begin_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2011-Dec-15 05:42:31 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-15 05:42:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-15 05:42:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-15 05:42:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-15 05:42:31 LOG5 end_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2011-Dec-15 05:42:31 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-15 05:42:31 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-15 05:42:31 LOG5 begin_task: Level: (4) ID = <10265> Status = 0 0 0 0 ok 2011-Dec-15 05:42:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-15 05:42:31 LOG5 log_alfabeam: Parameters: 9.8683888888888891 20.029666666666664 10.838231 2011.9561611149136 -76.100021 2011-Dec-15 05:42:31 LOG4 log_alfabeam: ALFABEAM 0 9.868388888888887 20.029666666666660 2011-Dec-15 05:42:31 LOG4 log_alfabeam: ALFABEAM 1 9.866788611479491 20.119641585536272 2011-Dec-15 05:42:31 LOG4 log_alfabeam: ALFABEAM 2 9.861181715837631 20.059548847697368 2011-Dec-15 05:42:31 LOG4 log_alfabeam: ALFABEAM 3 9.862812273317335 19.969228433029599 2011-Dec-15 05:42:31 LOG4 log_alfabeam: ALFABEAM 4 9.870028460872103 19.940018019425128 2011-Dec-15 05:42:31 LOG4 log_alfabeam: ALFABEAM 5 9.875597536223067 20.000041419560365 2011-Dec-15 05:42:31 LOG4 log_alfabeam: ALFABEAM 6 9.873988025116146 20.089345043783268 2011-Dec-15 05:42:31 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-15 05:42:31 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-15 05:42:31 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-15 05:42:31 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_155 2011-Dec-15 05:42:31 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-15 05:42:31 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-15 05:42:31 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-15 05:42:31 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-15 05:42:31 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-15 05:42:31 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-15 05:42:31 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-15 05:42:31 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-15 05:42:31 LOG3 take_mock_data: PSET configuration: patternid=134900015 2011-Dec-15 05:42:31 LOG3 take_mock_data: PSET configuration: scanid=134900017 2011-Dec-15 05:42:31 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-15 05:42:31 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-15 05:42:31 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-15 05:42:31 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456363273.0 2011-Dec-15 05:42:31 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306363273.0 2011-Dec-15 05:42:31 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-15 05:42:31 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-15 05:42:31 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_155:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=134900015:scanid=134900017:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456363273.0:topobfreqhz=1306363273.0:filetype=1 2011-Dec-15 05:42:31 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-15 05:42:31 LOG5 begin_task: Level: (5) ID = <10266> Status = 0 0 0 0 ok 2011-Dec-15 05:42:31 LOG4 from_mock: From MOCK: psetok 2011-Dec-15 05:42:31 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-15 05:42:31 LOG5 end_task: Level: (5) ID = <10266> Status = 0 0 0 0 ok 2011-Dec-15 05:42:31 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-15 05:42:31 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-15 05:42:31 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-15 05:42:31 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-15 05:42:31 LOG5 begin_task: Level: (5) ID = <10267> Status = 0 0 0 0 ok 2011-Dec-15 05:42:31 LOG4 from_mock: From MOCK: starok 2011-Dec-15 05:42:31 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-15 05:42:31 LOG5 end_task: Level: (5) ID = <10267> Status = 0 0 0 0 ok 2011-Dec-15 05:42:31 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-15 05:42:31 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134900017 2011-Dec-15 05:42:31 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-15 05:42:31 LOG5 begin_task: Level: (5) ID = <10268> Status = 0 0 0 0 ok 2011-Dec-15 05:42:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-15 05:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.474 (still bad) 2011-Dec-15 05:42:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-15 05:42:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 34952.00 2011-Dec-15 05:42:32 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-15 05:42:32 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-15 05:42:34 INFO2 got_mock_message: Mock spectrometer start file number is 01600 2011-Dec-15 05:42:34 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-15 05:42:34 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-15 05:42:34 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-15 05:42:34 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-15 05:42:34 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-15 05:42:34 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-15 05:42:34 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-15 05:42:34 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-15 05:42:34 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-15 05:42:34 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-15 05:42:34 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-15 05:42:34 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-15 05:42:34 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 05:42:34 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 05:42:34 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 05:42:34 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 05:42:34 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 05:42:34 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 05:42:34 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-15 05:42:37 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:42:37.02 2011-Dec-15 05:42:37 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323942157.02 Thu Dec 15 05:42:37 2011 2011-Dec-15 05:42:37 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-15 05:42:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.363273 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-15 05:42:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.363273 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 05:42:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.363273 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 05:42:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.363273 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-15 05:42:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.363273 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 05:42:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.363273 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 05:42:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.363273 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 05:42:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.363273 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-15 05:42:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.363273 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-15 05:42:37 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-15 05:42:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-15 05:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.473 (still bad) 2011-Dec-15 05:42:43 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-15 05:42:43 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-15 05:42:43 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-15 05:42:43 LOG5 end_task: Level: (5) ID = <10268> Status = 0 0 0 0 ok 2011-Dec-15 05:42:43 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-15 05:42:43 LOG5 end_task: Level: (4) ID = <10265> Status = 0 0 0 0 ok 2011-Dec-15 05:42:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-15 05:42:43 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-15 05:42:43 LOG5 finish_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2011-Dec-15 05:42:43 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-15 05:42:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 05:42:43 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-15 05:42:43 LOG5 end_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2011-Dec-15 05:42:43 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-15 05:42:43 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 99.17 and ZA = 13.57 2011-Dec-15 05:42:43 LOG3 track_source: Calling 'track_source AGES3193_p3_155 99.17 13.5668978637 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-15 05:42:43 START begin_task: Starting task 'sending tracking commands' 2011-Dec-15 05:42:43 LOG5 begin_task: Level: (3) ID = <10269> Status = 0 0 0 0 ok 2011-Dec-15 05:42:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_155} INFO {Slewing to source 'AGES3193_p3_155' ...} 2011-Dec-15 05:42:43 INFO1 track_source: Starting to track AGES3193_p3_155 2011-Dec-15 05:42:43 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_155" 2011-Dec-15 05:42:43 LOG3 vw_send: To DATATAKING: set ra 99.17 2011-Dec-15 05:42:43 LOG3 vw_send: To DATATAKING: set dec 13.5668978637 2011-Dec-15 05:42:43 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-15 05:42:43 LOG3 vw_send: To DATATAKING: pnt tr 99.17 13.5668978637 -CF 2011-Dec-15 05:42:43 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 05:42:43 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-15 05:42:43 LOG5 finish_task: Level: (3) ID = <10269> Status = 0 0 0 0 ok 2011-Dec-15 05:42:43 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-15 05:42:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 05:42:43 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-15 05:42:43 LOG5 end_task: Level: (3) ID = <10269> Status = 0 0 0 0 ok 2011-Dec-15 05:42:43 LOG1 fixed_driftmap: Parameters: HA = +00:57:03.5 Start = 10:50:45.0 LST = 10:50:29.7 diff = 15.4 secs 2011-Dec-15 05:42:43 INFO2 fixed_driftmap: Waiting 13.4 seconds for RA 9:53:42 2011-Dec-15 05:42:43 INFO2 lstwait: Waiting for 13.3 secs from LST 10:50:30 to LST 10:50:43 ... 2011-Dec-15 05:42:43 LOG4 send_obs_status: To obs_status: <1> TASKTIME 13.345108235179795 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-15 05:42:43 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-15 05:42:43 LOG5 begin_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2011-Dec-15 05:42:43 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_155" 2011-Dec-15 05:42:43 LOG4 got_cormsg: From DATATAKING: set ra 99.17 2011-Dec-15 05:42:43 LOG4 got_cormsg: From DATATAKING: set dec 13.5668978637 2011-Dec-15 05:42:43 LOG4 got_cormsg: From DATATAKING: vw% 99.17 2011-Dec-15 05:42:43 LOG4 got_cormsg: From DATATAKING: vw% 13.5668978637 2011-Dec-15 05:42:43 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 05:42:43 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-15 05:42:43 LOG4 got_cormsg: From DATATAKING: pnt tr 99.17 13.5668978637 -CF 2011-Dec-15 05:42:43 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-15 05:42:43 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-15 05:42:43 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 05:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-15 05:42:56 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-15 05:42:56 LOG5 end_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2011-Dec-15 05:42:56 LOG4 lstwait: Finished waiting 0.66 seconds late 2011-Dec-15 05:42:56 INFO3 lstwait: Finished waiting 2011-Dec-15 05:42:56 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-15 05:42:56 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-15 05:42:56 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-15 05:42:57 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-15 05:42:57 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-15 05:42:57 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-15 05:42:57 LOG5 begin_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2011-Dec-15 05:42:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-15 05:42:57 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-15 05:42:57 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-15 05:42:57 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-15 05:42:57 LOG3 take_mock_data: PSET configuration: obsnm=JM 2011-Dec-15 05:42:57 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_155 2011-Dec-15 05:42:57 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-15 05:42:57 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-15 05:42:57 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-15 05:42:57 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-15 05:42:57 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-15 05:42:57 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-15 05:42:57 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-15 05:42:57 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-15 05:42:57 LOG3 take_mock_data: PSET configuration: patternid=134900018 2011-Dec-15 05:42:57 LOG3 take_mock_data: PSET configuration: scanid=134900018 2011-Dec-15 05:42:57 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-15 05:42:57 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-15 05:42:57 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-15 05:42:57 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456363273.0 2011-Dec-15 05:42:57 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306363273.0 2011-Dec-15 05:42:57 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-15 05:42:57 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-15 05:42:57 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES3193_p3_155:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=134900018:scanid=134900018:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456363273.0:topobfreqhz=1306363273.0:filetype=1 2011-Dec-15 05:42:57 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-15 05:42:57 LOG5 begin_task: Level: (4) ID = <10272> Status = 0 0 0 0 ok 2011-Dec-15 05:42:57 LOG4 from_mock: From MOCK: psetok 2011-Dec-15 05:42:57 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-15 05:42:57 LOG5 end_task: Level: (4) ID = <10272> Status = 0 0 0 0 ok 2011-Dec-15 05:42:57 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-15 05:42:57 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-15 05:42:57 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-15 05:42:57 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-15 05:42:57 LOG5 begin_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2011-Dec-15 05:42:57 LOG4 from_mock: From MOCK: starok 2011-Dec-15 05:42:57 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-15 05:42:57 LOG5 end_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2011-Dec-15 05:42:57 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-15 05:42:57 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 134900018 2011-Dec-15 05:42:57 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-15 05:42:57 LOG5 begin_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2011-Dec-15 05:42:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-15 05:42:57 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-15 05:42:57 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-15 05:42:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 34978.00 2011-Dec-15 05:42:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-15 05:42:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.363273 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-15 05:42:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.363273 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 05:42:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.363273 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 05:42:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.363273 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-15 05:42:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.363273 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 05:42:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.363273 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 05:42:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.363273 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 05:42:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.363273 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-15 05:42:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.363273 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-15 05:42:59 INFO2 got_mock_message: Mock spectrometer start file number is 01700 2011-Dec-15 05:42:59 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-15 05:42:59 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2011-Dec-15 05:42:59 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-15 05:42:59 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-15 05:42:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-15 05:42:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-15 05:42:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-15 05:42:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-15 05:42:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-15 05:42:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-15 05:42:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-15 05:42:59 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-15 05:42:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 05:42:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 05:42:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 05:42:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 05:42:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 05:42:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 05:42:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-15 05:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2011-Dec-15 05:43:02 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:43:02.02 2011-Dec-15 05:43:02 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323942182.02 Thu Dec 15 05:43:02 2011 2011-Dec-15 05:43:02 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-15 05:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-15 05:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2011-Dec-15 05:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.094 (still bad) 2011-Dec-15 05:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.089 (still bad) 2011-Dec-15 05:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.088 (still bad) 2011-Dec-15 05:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.090 (still bad) 2011-Dec-15 05:43:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-15 05:43:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.913 1.089 0.924 0.916 2011-Dec-15 05:43:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 0.970 1.068 0.900 2011-Dec-15 05:43:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.849 0.919 1.014 0.926 2011-Dec-15 05:43:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.920 0.021 1.003 0.022 2011-Dec-15 05:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.089 (still bad) 2011-Dec-15 05:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.095 (still bad) 2011-Dec-15 05:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.089 (still bad) 2011-Dec-15 05:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.089 (still bad) 2011-Dec-15 05:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.089 (still bad) 2011-Dec-15 05:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.084 (still bad) 2011-Dec-15 05:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.089 (still bad) 2011-Dec-15 05:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.092 (still bad) 2011-Dec-15 05:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.083 (still bad) 2011-Dec-15 05:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.086 (still bad) 2011-Dec-15 05:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.088 (still bad) 2011-Dec-15 05:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.085 (still bad) 2011-Dec-15 05:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.088 (still bad) 2011-Dec-15 05:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.085 (still bad) 2011-Dec-15 05:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.085 (still bad) 2011-Dec-15 05:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.084 (still bad) 2011-Dec-15 05:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.083 (still bad) 2011-Dec-15 05:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.086 (still bad) 2011-Dec-15 05:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.087 (still bad) 2011-Dec-15 05:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.087 (still bad) 2011-Dec-15 05:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.086 (still bad) 2011-Dec-15 05:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.086 (still bad) 2011-Dec-15 05:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.085 (still bad) 2011-Dec-15 05:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.084 (still bad) 2011-Dec-15 05:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.088 (still bad) 2011-Dec-15 05:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.085 (still bad) 2011-Dec-15 05:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.084 (still bad) 2011-Dec-15 05:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.086 (still bad) 2011-Dec-15 05:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.084 (still bad) 2011-Dec-15 05:44:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-15 05:44:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.912 1.083 0.925 0.915 2011-Dec-15 05:44:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.922 0.967 1.069 0.897 2011-Dec-15 05:44:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.849 0.919 1.012 0.924 2011-Dec-15 05:44:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.920 0.020 1.002 0.020 2011-Dec-15 05:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.090 (still bad) 2011-Dec-15 05:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.087 (still bad) 2011-Dec-15 05:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.085 (still bad) 2011-Dec-15 05:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.088 (still bad) 2011-Dec-15 05:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.087 (still bad) 2011-Dec-15 05:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.085 (still bad) 2011-Dec-15 05:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.088 (still bad) 2011-Dec-15 05:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.087 (still bad) 2011-Dec-15 05:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.086 (still bad) 2011-Dec-15 05:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.090 (still bad) 2011-Dec-15 05:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.086 (still bad) 2011-Dec-15 05:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.086 (still bad) 2011-Dec-15 05:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.088 (still bad) 2011-Dec-15 05:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.088 (still bad) 2011-Dec-15 05:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.086 (still bad) 2011-Dec-15 05:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.088 (still bad) 2011-Dec-15 05:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.086 (still bad) 2011-Dec-15 05:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.088 (still bad) 2011-Dec-15 05:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.089 (still bad) 2011-Dec-15 05:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.089 (still bad) 2011-Dec-15 05:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.085 (still bad) 2011-Dec-15 05:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.090 (still bad) 2011-Dec-15 05:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.088 (still bad) 2011-Dec-15 05:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.089 (still bad) 2011-Dec-15 05:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.093 (still bad) 2011-Dec-15 05:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.092 (still bad) 2011-Dec-15 05:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.091 (still bad) 2011-Dec-15 05:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.092 (still bad) 2011-Dec-15 05:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.090 (still bad) 2011-Dec-15 05:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.091 (still bad) 2011-Dec-15 05:45:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2011-Dec-15 05:45:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.920 1.092 0.929 0.919 2011-Dec-15 05:45:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 0.977 1.074 0.905 2011-Dec-15 05:45:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.853 0.925 1.021 0.932 2011-Dec-15 05:45:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.022 1.010 0.019 2011-Dec-15 05:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.091 (still bad) 2011-Dec-15 05:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.089 (still bad) 2011-Dec-15 05:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.089 (still bad) 2011-Dec-15 05:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.086 (still bad) 2011-Dec-15 05:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.087 (still bad) 2011-Dec-15 05:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.096 (still bad) 2011-Dec-15 05:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.088 (still bad) 2011-Dec-15 05:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.087 (still bad) 2011-Dec-15 05:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.088 (still bad) 2011-Dec-15 05:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.087 (still bad) 2011-Dec-15 05:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.087 (still bad) 2011-Dec-15 05:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.094 (still bad) 2011-Dec-15 05:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.086 (still bad) 2011-Dec-15 05:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.087 (still bad) 2011-Dec-15 05:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.089 (still bad) 2011-Dec-15 05:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.086 (still bad) 2011-Dec-15 05:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.087 (still bad) 2011-Dec-15 05:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.095 (still bad) 2011-Dec-15 05:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.086 (still bad) 2011-Dec-15 05:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.088 (still bad) 2011-Dec-15 05:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.090 (still bad) 2011-Dec-15 05:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.086 (still bad) 2011-Dec-15 05:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.086 (still bad) 2011-Dec-15 05:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.093 (still bad) 2011-Dec-15 05:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.084 (still bad) 2011-Dec-15 05:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.086 (still bad) 2011-Dec-15 05:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.088 (still bad) 2011-Dec-15 05:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.087 (still bad) 2011-Dec-15 05:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.087 (still bad) 2011-Dec-15 05:46:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-15 05:46:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.922 1.095 0.932 0.923 2011-Dec-15 05:46:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 0.974 1.072 0.901 2011-Dec-15 05:46:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.854 0.925 1.024 0.935 2011-Dec-15 05:46:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.020 1.013 0.021 2011-Dec-15 05:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.087 (still bad) 2011-Dec-15 05:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.089 (still bad) 2011-Dec-15 05:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.093 (still bad) 2011-Dec-15 05:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.093 (still bad) 2011-Dec-15 05:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.095 (still bad) 2011-Dec-15 05:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-15 05:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.100 (still bad) 2011-Dec-15 05:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.101 (still bad) 2011-Dec-15 05:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.106 (still bad) 2011-Dec-15 05:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.106 (still bad) 2011-Dec-15 05:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-15 05:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2011-Dec-15 05:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.100 (still bad) 2011-Dec-15 05:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.099 (still bad) 2011-Dec-15 05:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.097 (still bad) 2011-Dec-15 05:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.089 (still bad) 2011-Dec-15 05:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.089 (still bad) 2011-Dec-15 05:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2011-Dec-15 05:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.089 (still bad) 2011-Dec-15 05:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.087 (still bad) 2011-Dec-15 05:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.088 (still bad) 2011-Dec-15 05:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.085 (still bad) 2011-Dec-15 05:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.088 (still bad) 2011-Dec-15 05:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.087 (still bad) 2011-Dec-15 05:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.085 (still bad) 2011-Dec-15 05:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.085 (still bad) 2011-Dec-15 05:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.085 (still bad) 2011-Dec-15 05:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.085 (still bad) 2011-Dec-15 05:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.086 (still bad) 2011-Dec-15 05:47:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-15 05:47:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.917 1.084 0.928 0.918 2011-Dec-15 05:47:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.926 0.973 1.074 0.902 2011-Dec-15 05:47:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.851 0.920 1.019 0.927 2011-Dec-15 05:47:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.021 1.005 0.021 2011-Dec-15 05:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.086 (still bad) 2011-Dec-15 05:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.084 (still bad) 2011-Dec-15 05:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.085 (still bad) 2011-Dec-15 05:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.085 (still bad) 2011-Dec-15 05:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.094 (still bad) 2011-Dec-15 05:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.086 (still bad) 2011-Dec-15 05:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.084 (still bad) 2011-Dec-15 05:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.087 (still bad) 2011-Dec-15 05:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.085 (still bad) 2011-Dec-15 05:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.087 (still bad) 2011-Dec-15 05:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.094 (still bad) 2011-Dec-15 05:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.087 (still bad) 2011-Dec-15 05:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.086 (still bad) 2011-Dec-15 05:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.087 (still bad) 2011-Dec-15 05:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.087 (still bad) 2011-Dec-15 05:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.088 (still bad) 2011-Dec-15 05:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.093 (still bad) 2011-Dec-15 05:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.085 (still bad) 2011-Dec-15 05:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.087 (still bad) 2011-Dec-15 05:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.088 (still bad) 2011-Dec-15 05:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.086 (still bad) 2011-Dec-15 05:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.086 (still bad) 2011-Dec-15 05:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2011-Dec-15 05:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.091 (still bad) 2011-Dec-15 05:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.091 (still bad) 2011-Dec-15 05:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2011-Dec-15 05:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2011-Dec-15 05:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2011-Dec-15 05:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.104 (still bad) 2011-Dec-15 05:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.094 (still bad) 2011-Dec-15 05:48:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-15 05:48:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 1.094 0.927 0.921 2011-Dec-15 05:48:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 0.970 1.072 0.901 2011-Dec-15 05:48:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.848 0.919 1.013 0.926 2011-Dec-15 05:48:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.022 1.006 0.022 2011-Dec-15 05:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.092 (still bad) 2011-Dec-15 05:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.088 (still bad) 2011-Dec-15 05:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.089 (still bad) 2011-Dec-15 05:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.096 (still bad) 2011-Dec-15 05:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.094 (still bad) 2011-Dec-15 05:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.097 (still bad) 2011-Dec-15 05:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.101 (still bad) 2011-Dec-15 05:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2011-Dec-15 05:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.096 (still bad) 2011-Dec-15 05:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.100 (still bad) 2011-Dec-15 05:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.088 (still bad) 2011-Dec-15 05:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.087 (still bad) 2011-Dec-15 05:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.088 (still bad) 2011-Dec-15 05:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.087 (still bad) 2011-Dec-15 05:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.090 (still bad) 2011-Dec-15 05:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.089 (still bad) 2011-Dec-15 05:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.087 (still bad) 2011-Dec-15 05:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.087 (still bad) 2011-Dec-15 05:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.089 (still bad) 2011-Dec-15 05:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.087 (still bad) 2011-Dec-15 05:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.088 (still bad) 2011-Dec-15 05:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.089 (still bad) 2011-Dec-15 05:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.086 (still bad) 2011-Dec-15 05:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.088 (still bad) 2011-Dec-15 05:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.086 (still bad) 2011-Dec-15 05:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.085 (still bad) 2011-Dec-15 05:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.085 (still bad) 2011-Dec-15 05:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.086 (still bad) 2011-Dec-15 05:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.086 (still bad) 2011-Dec-15 05:49:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-15 05:49:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.913 1.083 0.923 0.916 2011-Dec-15 05:49:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 0.967 1.069 0.897 2011-Dec-15 05:49:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.849 0.917 1.016 0.924 2011-Dec-15 05:49:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.919 0.020 1.002 0.020 2011-Dec-15 05:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.087 (still bad) 2011-Dec-15 05:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.085 (still bad) 2011-Dec-15 05:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.085 (still bad) 2011-Dec-15 05:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.088 (still bad) 2011-Dec-15 05:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.085 (still bad) 2011-Dec-15 05:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.087 (still bad) 2011-Dec-15 05:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.087 (still bad) 2011-Dec-15 05:49:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.087 (still bad) 2011-Dec-15 05:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.086 (still bad) 2011-Dec-15 05:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.088 (still bad) 2011-Dec-15 05:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.089 (still bad) 2011-Dec-15 05:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.090 (still bad) 2011-Dec-15 05:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.090 (still bad) 2011-Dec-15 05:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.087 (still bad) 2011-Dec-15 05:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.088 (still bad) 2011-Dec-15 05:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.090 (still bad) 2011-Dec-15 05:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.090 (still bad) 2011-Dec-15 05:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.090 (still bad) 2011-Dec-15 05:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.092 (still bad) 2011-Dec-15 05:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.090 (still bad) 2011-Dec-15 05:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.090 (still bad) 2011-Dec-15 05:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.092 (still bad) 2011-Dec-15 05:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.090 (still bad) 2011-Dec-15 05:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.088 (still bad) 2011-Dec-15 05:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.094 (still bad) 2011-Dec-15 05:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.090 (still bad) 2011-Dec-15 05:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.090 (still bad) 2011-Dec-15 05:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.089 (still bad) 2011-Dec-15 05:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.089 (still bad) 2011-Dec-15 05:50:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-15 05:50:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.920 1.093 0.929 0.919 2011-Dec-15 05:50:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 0.967 1.069 0.898 2011-Dec-15 05:50:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.847 0.919 1.018 0.926 2011-Dec-15 05:50:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.934 0.021 1.019 0.021 2011-Dec-15 05:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.094 (still bad) 2011-Dec-15 05:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2011-Dec-15 05:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-15 05:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-15 05:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2011-Dec-15 05:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-15 05:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-15 05:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-15 05:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-15 05:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.105 (still bad) 2011-Dec-15 05:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.096 (still bad) 2011-Dec-15 05:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.093 (still bad) 2011-Dec-15 05:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.088 (still bad) 2011-Dec-15 05:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.089 (still bad) 2011-Dec-15 05:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.091 (still bad) 2011-Dec-15 05:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.091 (still bad) 2011-Dec-15 05:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.089 (still bad) 2011-Dec-15 05:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.091 (still bad) 2011-Dec-15 05:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.091 (still bad) 2011-Dec-15 05:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.087 (still bad) 2011-Dec-15 05:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.094 (still bad) 2011-Dec-15 05:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.089 (still bad) 2011-Dec-15 05:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.091 (still bad) 2011-Dec-15 05:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.090 (still bad) 2011-Dec-15 05:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.091 (still bad) 2011-Dec-15 05:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.089 (still bad) 2011-Dec-15 05:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.093 (still bad) 2011-Dec-15 05:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.090 (still bad) 2011-Dec-15 05:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.090 (still bad) 2011-Dec-15 05:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.094 (still bad) 2011-Dec-15 05:51:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-15 05:51:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.918 1.090 0.929 0.919 2011-Dec-15 05:51:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.930 0.974 1.068 0.900 2011-Dec-15 05:51:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.851 0.921 1.018 0.928 2011-Dec-15 05:51:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.021 1.007 0.022 2011-Dec-15 05:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.088 (still bad) 2011-Dec-15 05:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.093 (still bad) 2011-Dec-15 05:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.092 (still bad) 2011-Dec-15 05:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.090 (still bad) 2011-Dec-15 05:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.092 (still bad) 2011-Dec-15 05:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.091 (still bad) 2011-Dec-15 05:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.090 (still bad) 2011-Dec-15 05:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.094 (still bad) 2011-Dec-15 05:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.089 (still bad) 2011-Dec-15 05:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.091 (still bad) 2011-Dec-15 05:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.091 (still bad) 2011-Dec-15 05:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.090 (still bad) 2011-Dec-15 05:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.092 (still bad) 2011-Dec-15 05:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.094 (still bad) 2011-Dec-15 05:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.091 (still bad) 2011-Dec-15 05:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.090 (still bad) 2011-Dec-15 05:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.094 (still bad) 2011-Dec-15 05:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.091 (still bad) 2011-Dec-15 05:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.091 (still bad) 2011-Dec-15 05:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.097 (still bad) 2011-Dec-15 05:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.090 (still bad) 2011-Dec-15 05:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.092 (still bad) 2011-Dec-15 05:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.094 (still bad) 2011-Dec-15 05:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.089 (still bad) 2011-Dec-15 05:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.090 (still bad) 2011-Dec-15 05:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2011-Dec-15 05:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.090 (still bad) 2011-Dec-15 05:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.089 (still bad) 2011-Dec-15 05:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.094 (still bad) 2011-Dec-15 05:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.089 (still bad) 2011-Dec-15 05:52:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-15 05:52:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.918 1.089 0.928 0.917 2011-Dec-15 05:52:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 0.968 1.070 0.900 2011-Dec-15 05:52:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.857 0.931 1.019 0.929 2011-Dec-15 05:52:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.024 1.005 0.024 2011-Dec-15 05:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.096 (still bad) 2011-Dec-15 05:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.091 (still bad) 2011-Dec-15 05:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.089 (still bad) 2011-Dec-15 05:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.092 (still bad) 2011-Dec-15 05:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.090 (still bad) 2011-Dec-15 05:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.092 (still bad) 2011-Dec-15 05:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.099 (still bad) 2011-Dec-15 05:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.089 (still bad) 2011-Dec-15 05:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.088 (still bad) 2011-Dec-15 05:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.094 (still bad) 2011-Dec-15 05:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.090 (still bad) 2011-Dec-15 05:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.090 (still bad) 2011-Dec-15 05:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2011-Dec-15 05:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.087 (still bad) 2011-Dec-15 05:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.087 (still bad) 2011-Dec-15 05:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.093 (still bad) 2011-Dec-15 05:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.087 (still bad) 2011-Dec-15 05:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.090 (still bad) 2011-Dec-15 05:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.101 (still bad) 2011-Dec-15 05:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.094 (still bad) 2011-Dec-15 05:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.094 (still bad) 2011-Dec-15 05:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.099 (still bad) 2011-Dec-15 05:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.097 (still bad) 2011-Dec-15 05:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.096 (still bad) 2011-Dec-15 05:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.104 (still bad) 2011-Dec-15 05:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.095 (still bad) 2011-Dec-15 05:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.094 (still bad) 2011-Dec-15 05:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.094 (still bad) 2011-Dec-15 05:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.092 (still bad) 2011-Dec-15 05:53:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-15 05:53:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.919 1.089 0.926 0.917 2011-Dec-15 05:53:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 0.971 1.096 0.923 2011-Dec-15 05:53:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.850 0.920 1.021 0.929 2011-Dec-15 05:53:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.023 1.007 0.023 2011-Dec-15 05:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.100 (still bad) 2011-Dec-15 05:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.099 (still bad) 2011-Dec-15 05:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.102 (still bad) 2011-Dec-15 05:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.099 (still bad) 2011-Dec-15 05:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.097 (still bad) 2011-Dec-15 05:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.095 (still bad) 2011-Dec-15 05:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.091 (still bad) 2011-Dec-15 05:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.088 (still bad) 2011-Dec-15 05:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.089 (still bad) 2011-Dec-15 05:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.090 (still bad) 2011-Dec-15 05:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.089 (still bad) 2011-Dec-15 05:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.091 (still bad) 2011-Dec-15 05:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.089 (still bad) 2011-Dec-15 05:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.090 (still bad) 2011-Dec-15 05:53:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.092 (still bad) 2011-Dec-15 05:54:01 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.091 (still bad) 2011-Dec-15 05:54:03 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.093 (still bad) 2011-Dec-15 05:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.094 (still bad) 2011-Dec-15 05:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.094 (still bad) 2011-Dec-15 05:54:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.091 (still bad) 2011-Dec-15 05:54:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.093 (still bad) 2011-Dec-15 05:54:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.092 (still bad) 2011-Dec-15 05:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.089 (still bad) 2011-Dec-15 05:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.093 (still bad) 2011-Dec-15 05:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.089 (still bad) 2011-Dec-15 05:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.087 (still bad) 2011-Dec-15 05:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.090 (still bad) 2011-Dec-15 05:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.086 (still bad) 2011-Dec-15 05:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.089 (still bad) 2011-Dec-15 05:54:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-15 05:54:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.918 1.091 0.930 0.917 2011-Dec-15 05:54:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.928 0.974 1.079 0.907 2011-Dec-15 05:54:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.849 0.920 1.018 0.927 2011-Dec-15 05:54:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.021 1.007 0.022 2011-Dec-15 05:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.090 (still bad) 2011-Dec-15 05:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.089 (still bad) 2011-Dec-15 05:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.089 (still bad) 2011-Dec-15 05:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.088 (still bad) 2011-Dec-15 05:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.090 (still bad) 2011-Dec-15 05:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.089 (still bad) 2011-Dec-15 05:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.092 (still bad) 2011-Dec-15 05:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.089 (still bad) 2011-Dec-15 05:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.094 (still bad) 2011-Dec-15 05:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.091 (still bad) 2011-Dec-15 05:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.090 (still bad) 2011-Dec-15 05:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.090 (still bad) 2011-Dec-15 05:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.091 (still bad) 2011-Dec-15 05:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.088 (still bad) 2011-Dec-15 05:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.087 (still bad) 2011-Dec-15 05:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.090 (still bad) 2011-Dec-15 05:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.089 (still bad) 2011-Dec-15 05:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.090 (still bad) 2011-Dec-15 05:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.091 (still bad) 2011-Dec-15 05:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.089 (still bad) 2011-Dec-15 05:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.091 (still bad) 2011-Dec-15 05:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.090 (still bad) 2011-Dec-15 05:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.089 (still bad) 2011-Dec-15 05:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.092 (still bad) 2011-Dec-15 05:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.093 (still bad) 2011-Dec-15 05:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.089 (still bad) 2011-Dec-15 05:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.090 (still bad) 2011-Dec-15 05:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.088 (still bad) 2011-Dec-15 05:55:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.089 (still bad) 2011-Dec-15 05:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.097 (still bad) 2011-Dec-15 05:55:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-15 05:55:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.918 1.089 0.928 0.917 2011-Dec-15 05:55:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.921 0.966 1.070 0.899 2011-Dec-15 05:55:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.847 0.920 1.019 0.928 2011-Dec-15 05:55:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.022 1.006 0.022 2011-Dec-15 05:55:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.089 (still bad) 2011-Dec-15 05:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.091 (still bad) 2011-Dec-15 05:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.088 (still bad) 2011-Dec-15 05:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.089 (still bad) 2011-Dec-15 05:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.099 (still bad) 2011-Dec-15 05:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.089 (still bad) 2011-Dec-15 05:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.089 (still bad) 2011-Dec-15 05:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.092 (still bad) 2011-Dec-15 05:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.089 (still bad) 2011-Dec-15 05:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.090 (still bad) 2011-Dec-15 05:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.099 (still bad) 2011-Dec-15 05:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.091 (still bad) 2011-Dec-15 05:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.089 (still bad) 2011-Dec-15 05:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.094 (still bad) 2011-Dec-15 05:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.089 (still bad) 2011-Dec-15 05:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.088 (still bad) 2011-Dec-15 05:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.097 (still bad) 2011-Dec-15 05:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.090 (still bad) 2011-Dec-15 05:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.091 (still bad) 2011-Dec-15 05:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.094 (still bad) 2011-Dec-15 05:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.093 (still bad) 2011-Dec-15 05:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.092 (still bad) 2011-Dec-15 05:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2011-Dec-15 05:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.093 (still bad) 2011-Dec-15 05:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.091 (still bad) 2011-Dec-15 05:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.092 (still bad) 2011-Dec-15 05:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.093 (still bad) 2011-Dec-15 05:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.092 (still bad) 2011-Dec-15 05:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.099 (still bad) 2011-Dec-15 05:56:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-15 05:56:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 1.095 0.927 0.918 2011-Dec-15 05:56:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 0.967 1.070 0.899 2011-Dec-15 05:56:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.853 0.925 1.020 0.930 2011-Dec-15 05:56:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.023 1.006 0.023 2011-Dec-15 05:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.092 (still bad) 2011-Dec-15 05:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.093 (still bad) 2011-Dec-15 05:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.090 (still bad) 2011-Dec-15 05:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.091 (still bad) 2011-Dec-15 05:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.100 (still bad) 2011-Dec-15 05:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.092 (still bad) 2011-Dec-15 05:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.090 (still bad) 2011-Dec-15 05:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.092 (still bad) 2011-Dec-15 05:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.090 (still bad) 2011-Dec-15 05:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.092 (still bad) 2011-Dec-15 05:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.100 (still bad) 2011-Dec-15 05:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.091 (still bad) 2011-Dec-15 05:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.090 (still bad) 2011-Dec-15 05:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.088 (still bad) 2011-Dec-15 05:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.088 (still bad) 2011-Dec-15 05:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.089 (still bad) 2011-Dec-15 05:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.090 (still bad) 2011-Dec-15 05:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.089 (still bad) 2011-Dec-15 05:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.088 (still bad) 2011-Dec-15 05:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.092 (still bad) 2011-Dec-15 05:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.089 (still bad) 2011-Dec-15 05:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.091 (still bad) 2011-Dec-15 05:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.091 (still bad) 2011-Dec-15 05:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.090 (still bad) 2011-Dec-15 05:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.089 (still bad) 2011-Dec-15 05:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.091 (still bad) 2011-Dec-15 05:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.091 (still bad) 2011-Dec-15 05:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.094 (still bad) 2011-Dec-15 05:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.091 (still bad) 2011-Dec-15 05:57:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-15 05:57:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.919 1.090 0.926 0.919 2011-Dec-15 05:57:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 0.967 1.072 0.900 2011-Dec-15 05:57:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.848 0.919 1.017 0.928 2011-Dec-15 05:57:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.024 1.008 0.024 2011-Dec-15 05:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.090 (still bad) 2011-Dec-15 05:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.089 (still bad) 2011-Dec-15 05:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.087 (still bad) 2011-Dec-15 05:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2011-Dec-15 05:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.089 (still bad) 2011-Dec-15 05:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.090 (still bad) 2011-Dec-15 05:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.092 (still bad) 2011-Dec-15 05:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.089 (still bad) 2011-Dec-15 05:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.088 (still bad) 2011-Dec-15 05:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.095 (still bad) 2011-Dec-15 05:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.090 (still bad) 2011-Dec-15 05:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.088 (still bad) 2011-Dec-15 05:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.089 (still bad) 2011-Dec-15 05:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.090 (still bad) 2011-Dec-15 05:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.088 (still bad) 2011-Dec-15 05:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.098 (still bad) 2011-Dec-15 05:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.092 (still bad) 2011-Dec-15 05:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.093 (still bad) 2011-Dec-15 05:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.094 (still bad) 2011-Dec-15 05:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.094 (still bad) 2011-Dec-15 05:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.094 (still bad) 2011-Dec-15 05:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.103 (still bad) 2011-Dec-15 05:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-15 05:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-15 05:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.097 (still bad) 2011-Dec-15 05:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.092 (still bad) 2011-Dec-15 05:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.091 (still bad) 2011-Dec-15 05:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.097 (still bad) 2011-Dec-15 05:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.093 (still bad) 2011-Dec-15 05:58:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-15 05:58:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.919 1.092 0.924 0.917 2011-Dec-15 05:58:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 0.967 1.070 0.899 2011-Dec-15 05:58:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.848 0.917 1.015 0.927 2011-Dec-15 05:58:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.021 1.005 0.022 2011-Dec-15 05:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.092 (still bad) 2011-Dec-15 05:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.090 (still bad) 2011-Dec-15 05:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.091 (still bad) 2011-Dec-15 05:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.095 (still bad) 2011-Dec-15 05:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.089 (still bad) 2011-Dec-15 05:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.090 (still bad) 2011-Dec-15 05:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.093 (still bad) 2011-Dec-15 05:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.092 (still bad) 2011-Dec-15 05:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.093 (still bad) 2011-Dec-15 05:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.102 (still bad) 2011-Dec-15 05:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.095 (still bad) 2011-Dec-15 05:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.097 (still bad) 2011-Dec-15 05:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.101 (still bad) 2011-Dec-15 05:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.096 (still bad) 2011-Dec-15 05:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.097 (still bad) 2011-Dec-15 05:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.103 (still bad) 2011-Dec-15 05:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.095 (still bad) 2011-Dec-15 05:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.094 (still bad) 2011-Dec-15 05:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.094 (still bad) 2011-Dec-15 05:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.093 (still bad) 2011-Dec-15 05:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.094 (still bad) 2011-Dec-15 05:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.100 (still bad) 2011-Dec-15 05:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.093 (still bad) 2011-Dec-15 05:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.092 (still bad) 2011-Dec-15 05:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.095 (still bad) 2011-Dec-15 05:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.093 (still bad) 2011-Dec-15 05:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.092 (still bad) 2011-Dec-15 05:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.099 (still bad) 2011-Dec-15 05:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.093 (still bad) 2011-Dec-15 05:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.091 (still bad) 2011-Dec-15 05:59:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-15 05:59:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 1.093 0.930 0.921 2011-Dec-15 05:59:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 0.970 1.072 0.902 2011-Dec-15 05:59:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.848 0.920 1.019 0.929 2011-Dec-15 05:59:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.022 1.010 0.023 2011-Dec-15 05:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.090 (still bad) 2011-Dec-15 05:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.092 (still bad) 2011-Dec-15 05:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.100 (still bad) 2011-Dec-15 05:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.095 (still bad) 2011-Dec-15 05:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.093 (still bad) 2011-Dec-15 05:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.097 (still bad) 2011-Dec-15 05:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.094 (still bad) 2011-Dec-15 05:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.094 (still bad) 2011-Dec-15 05:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.101 (still bad) 2011-Dec-15 05:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.093 (still bad) 2011-Dec-15 06:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.093 (still bad) 2011-Dec-15 06:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-15 06:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.093 (still bad) 2011-Dec-15 06:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.093 (still bad) 2011-Dec-15 06:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.099 (still bad) 2011-Dec-15 06:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.093 (still bad) 2011-Dec-15 06:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.092 (still bad) 2011-Dec-15 06:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.097 (still bad) 2011-Dec-15 06:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.093 (still bad) 2011-Dec-15 06:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.091 (still bad) 2011-Dec-15 06:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.098 (still bad) 2011-Dec-15 06:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.090 (still bad) 2011-Dec-15 06:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.092 (still bad) 2011-Dec-15 06:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.091 (still bad) 2011-Dec-15 06:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.092 (still bad) 2011-Dec-15 06:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.092 (still bad) 2011-Dec-15 06:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.093 (still bad) 2011-Dec-15 06:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.093 (still bad) 2011-Dec-15 06:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.091 (still bad) 2011-Dec-15 06:00:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-15 06:00:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.922 1.092 0.929 0.922 2011-Dec-15 06:00:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 0.970 1.075 0.902 2011-Dec-15 06:00:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.850 0.921 1.018 0.929 2011-Dec-15 06:00:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.022 1.009 0.022 2011-Dec-15 06:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.091 (still bad) 2011-Dec-15 06:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2011-Dec-15 06:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.093 (still bad) 2011-Dec-15 06:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.092 (still bad) 2011-Dec-15 06:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-15 06:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.091 (still bad) 2011-Dec-15 06:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.091 (still bad) 2011-Dec-15 06:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.093 (still bad) 2011-Dec-15 06:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.093 (still bad) 2011-Dec-15 06:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.089 (still bad) 2011-Dec-15 06:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.089 (still bad) 2011-Dec-15 06:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.090 (still bad) 2011-Dec-15 06:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.089 (still bad) 2011-Dec-15 06:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.091 (still bad) 2011-Dec-15 06:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.093 (still bad) 2011-Dec-15 06:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.091 (still bad) 2011-Dec-15 06:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.094 (still bad) 2011-Dec-15 06:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.092 (still bad) 2011-Dec-15 06:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.092 (still bad) 2011-Dec-15 06:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.096 (still bad) 2011-Dec-15 06:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.093 (still bad) 2011-Dec-15 06:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.092 (still bad) 2011-Dec-15 06:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.093 (still bad) 2011-Dec-15 06:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.090 (still bad) 2011-Dec-15 06:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.091 (still bad) 2011-Dec-15 06:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.091 (still bad) 2011-Dec-15 06:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.090 (still bad) 2011-Dec-15 06:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.088 (still bad) 2011-Dec-15 06:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.090 (still bad) 2011-Dec-15 06:01:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-15 06:01:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.922 1.090 0.928 0.920 2011-Dec-15 06:01:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.926 0.969 1.069 0.899 2011-Dec-15 06:01:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.850 0.919 1.015 0.926 2011-Dec-15 06:01:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.023 1.007 0.024 2011-Dec-15 06:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.089 (still bad) 2011-Dec-15 06:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.092 (still bad) 2011-Dec-15 06:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.090 (still bad) 2011-Dec-15 06:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.087 (still bad) 2011-Dec-15 06:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.087 (still bad) 2011-Dec-15 06:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.087 (still bad) 2011-Dec-15 06:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.088 (still bad) 2011-Dec-15 06:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.089 (still bad) 2011-Dec-15 06:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.090 (still bad) 2011-Dec-15 06:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.088 (still bad) 2011-Dec-15 06:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.087 (still bad) 2011-Dec-15 06:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.086 (still bad) 2011-Dec-15 06:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.089 (still bad) 2011-Dec-15 06:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-15 06:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.088 (still bad) 2011-Dec-15 06:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.086 (still bad) 2011-Dec-15 06:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.089 (still bad) 2011-Dec-15 06:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.089 (still bad) 2011-Dec-15 06:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.089 (still bad) 2011-Dec-15 06:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.098 (still bad) 2011-Dec-15 06:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.092 (still bad) 2011-Dec-15 06:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.089 (still bad) 2011-Dec-15 06:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.091 (still bad) 2011-Dec-15 06:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.090 (still bad) 2011-Dec-15 06:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.091 (still bad) 2011-Dec-15 06:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.098 (still bad) 2011-Dec-15 06:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.090 (still bad) 2011-Dec-15 06:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.088 (still bad) 2011-Dec-15 06:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.092 (still bad) 2011-Dec-15 06:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.089 (still bad) 2011-Dec-15 06:02:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-15 06:02:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.920 1.089 0.926 0.918 2011-Dec-15 06:02:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.921 0.968 1.070 0.900 2011-Dec-15 06:02:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.850 0.919 1.018 0.930 2011-Dec-15 06:02:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.023 1.007 0.024 2011-Dec-15 06:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.099 (still bad) 2011-Dec-15 06:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.089 (still bad) 2011-Dec-15 06:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.089 (still bad) 2011-Dec-15 06:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.091 (still bad) 2011-Dec-15 06:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.086 (still bad) 2011-Dec-15 06:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.089 (still bad) 2011-Dec-15 06:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-15 06:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.090 (still bad) 2011-Dec-15 06:02:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-15 06:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.088 (still bad) 2011-Dec-15 06:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.088 (still bad) 2011-Dec-15 06:03:03 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-15 06:03:03 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-15 06:03:03 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-15 06:03:03 LOG5 end_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2011-Dec-15 06:03:03 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-15 06:03:03 LOG5 end_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2011-Dec-15 06:03:03 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-15 06:03:03 LOG5 finish_task: Level: (2) ID = <10233> Status = 0 0 0 0 ok 2011-Dec-15 06:03:03 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-15 06:03:03 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-15 06:03:03 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-15 06:03:03 LOG5 end_task: Level: (2) ID = <10233> Status = 0 0 0 0 ok 2011-Dec-15 06:03:03 COMMAND run_command_line: EXECUTING command 48: 'ENDIF' 2011-Dec-15 06:03:03 COMMAND run_command_line: EXECUTING command 55: 'LOAD togs_cima31.conf' 2011-Dec-15 06:03:03 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2011-Dec-15 06:03:03 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-15 06:03:03 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2011-Dec-15 06:03:03 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima31.conf' 2011-Dec-15 06:03:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2011-Dec-15 06:03:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2011-Dec-15 06:03:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2011-Dec-15 06:03:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2011-Dec-15 06:03:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2011-Dec-15 06:03:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2011-Dec-15 06:03:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2011-Dec-15 06:03:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2011-Dec-15 06:03:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2011-Dec-15 06:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.088 (still bad) 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2011-Dec-15 06:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2011-Dec-15 06:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2011-Dec-15 06:03:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-15 06:03:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-15 06:03:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-15 06:03:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-15 06:03:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2011-Dec-15 06:03:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2011-Dec-15 06:03:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2011-Dec-15 06:03:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2011-Dec-15 06:03:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2011-Dec-15 06:03:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2011-Dec-15 06:03:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2011-Dec-15 06:03:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2011-Dec-15 06:03:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-15 06:03:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-15 06:03:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-15 06:03:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-15 06:03:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2011-Dec-15 06:03:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2011-Dec-15 06:03:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2011-Dec-15 06:03:05 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-15 06:03:05 BEGIN begin_task: Starting task 'configuring IF/LO path' 2011-Dec-15 06:03:05 LOG5 begin_task: Level: (2) ID = <10275> Status = 0 0 0 0 ok 2011-Dec-15 06:03:05 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2011-Dec-15 06:03:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2011-Dec-15 06:03:05 LOG1 config_iflo: Receiver ALFA already selected 2011-Dec-15 06:03:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-15 06:03:05 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-15 06:03:05 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-15 06:03:05 LOG5 begin_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2011-Dec-15 06:03:05 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-15 06:03:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-15 06:03:05 LOG5 end_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2011-Dec-15 06:03:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-15 06:03:05 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-15 06:03:05 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2011-Dec-15 06:03:05 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2011-Dec-15 06:03:05 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2011-Dec-15 06:03:05 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2011-Dec-15 06:03:05 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2011-Dec-15 06:03:05 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2011-Dec-15 06:03:05 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2011-Dec-15 06:03:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2011-Dec-15 06:03:05 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2011-Dec-15 06:03:05 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2011-Dec-15 06:03:05 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2011-Dec-15 06:03:05 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2011-Dec-15 06:03:05 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2011-Dec-15 06:03:05 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2011-Dec-15 06:03:05 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2011-Dec-15 06:03:05 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2011-Dec-15 06:03:05 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2011-Dec-15 06:03:05 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2011-Dec-15 06:03:05 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2011-Dec-15 06:03:05 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2011-Dec-15 06:03:05 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2011-Dec-15 06:03:05 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2011-Dec-15 06:03:05 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2011-Dec-15 06:03:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 06:03:05 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2011-Dec-15 06:03:05 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2011-Dec-15 06:03:05 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2011-Dec-15 06:03:05 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2011-Dec-15 06:03:05 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2011-Dec-15 06:03:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2011-Dec-15 06:03:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 06:03:05 START begin_task: Starting task 'waiting on configuring IF/LO path' 2011-Dec-15 06:03:05 LOG5 begin_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2011-Dec-15 06:03:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2011-Dec-15 06:03:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2011-Dec-15 06:03:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 06:03:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 06:03:06 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:03:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:03:07 LOG4 got_cormsg: From DATATAKING: vw% DONE 2011-Dec-15 06:03:07 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2011-Dec-15 06:03:07 LOG5 end_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2011-Dec-15 06:03:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2011-Dec-15 06:03:07 STOP finish_task: Finishing task 'configuring IF/LO path' 2011-Dec-15 06:03:07 LOG5 finish_task: Level: (2) ID = <10275> Status = 0 0 0 0 ok 2011-Dec-15 06:03:07 DONE finish_task: DONE finished configuration: IF/LO path 2011-Dec-15 06:03:07 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-15 06:03:07 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2011-Dec-15 06:03:07 LOG5 end_task: Level: (2) ID = <10275> Status = 0 0 0 0 ok 2011-Dec-15 06:03:07 BEGIN begin_task: Starting task 'configuring WAPPs' 2011-Dec-15 06:03:07 LOG5 begin_task: Level: (2) ID = <10278> Status = 0 0 0 0 ok 2011-Dec-15 06:03:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2011-Dec-15 06:03:07 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2011-Dec-15 06:03:07 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Dec-15 06:03:07 START begin_task: Starting task 'selecting calibration port' 2011-Dec-15 06:03:07 LOG5 begin_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2011-Dec-15 06:03:07 LOG3 vw_send: To DATATAKING: calport 3 2011-Dec-15 06:03:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Dec-15 06:03:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 06:03:07 START begin_task: Starting task 'waiting on calport' 2011-Dec-15 06:03:07 LOG5 begin_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2011-Dec-15 06:03:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:03:07 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Dec-15 06:03:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 06:03:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:03:07 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-15 06:03:07 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Dec-15 06:03:07 LOG5 end_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2011-Dec-15 06:03:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Dec-15 06:03:07 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Dec-15 06:03:07 LOG5 end_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2011-Dec-15 06:03:07 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-15 06:03:07 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-15 06:03:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-15 06:03:07 LOG5 begin_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2011-Dec-15 06:03:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:03:07 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-15 06:03:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-15 06:03:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-15 06:03:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-15 06:03:07 LOG5 end_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2011-Dec-15 06:03:07 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2011-Dec-15 06:03:07 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2011-Dec-15 06:03:07 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2011-Dec-15 06:03:07 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2011-Dec-15 06:03:07 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2011-Dec-15 06:03:07 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2011-Dec-15 06:03:07 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2011-Dec-15 06:03:07 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2011-Dec-15 06:03:07 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2011-Dec-15 06:03:07 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2011-Dec-15 06:03:07 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2011-Dec-15 06:03:08 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2011-Dec-15 06:03:08 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Dec-15 06:03:08 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Dec-15 06:03:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-15 06:03:08 LOG5 begin_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2011-Dec-15 06:03:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2011-Dec-15 06:03:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2011-Dec-15 06:03:08 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-15 06:03:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2011-Dec-15 06:03:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-15 06:03:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-15 06:03:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-15 06:03:08 LOG5 end_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2011-Dec-15 06:03:08 LOG3 sock_errsend: To WAPPDATA: FLUSH 2011-Dec-15 06:03:08 STOP finish_task: Finishing task 'configuring WAPPs' 2011-Dec-15 06:03:08 LOG5 finish_task: Level: (2) ID = <10278> Status = 0 0 0 0 ok 2011-Dec-15 06:03:08 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2011-Dec-15 06:03:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-15 06:03:08 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2011-Dec-15 06:03:08 LOG5 end_task: Level: (2) ID = <10278> Status = 0 0 0 0 ok 2011-Dec-15 06:03:08 COMMAND run_command_line: EXECUTING command 56: 'TRACKCURPOS' 2011-Dec-15 06:03:08 BEGIN begin_task: Starting task 'tracking current position' 2011-Dec-15 06:03:08 LOG5 begin_task: Level: (2) ID = <10283> Status = 0 0 0 0 ok 2011-Dec-15 06:03:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2011-Dec-15 06:03:08 INFO1 track_current_pos: Starting to track the current commanded position RA = 10:13:14.6 and Dec = +20:02:10.8 2011-Dec-15 06:03:08 LOG3 track_source: Calling 'track_source Cur-pos 101314.6 200210.8 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2011-Dec-15 06:03:08 START begin_task: Starting task 'sending tracking commands' 2011-Dec-15 06:03:08 LOG5 begin_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2011-Dec-15 06:03:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2011-Dec-15 06:03:08 INFO1 track_source: Starting to track Cur-pos 2011-Dec-15 06:03:08 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2011-Dec-15 06:03:08 LOG3 vw_send: To DATATAKING: set ra 101314.6 2011-Dec-15 06:03:08 LOG3 vw_send: To DATATAKING: set dec 200210.8 2011-Dec-15 06:03:08 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-15 06:03:08 LOG3 vw_send: To DATATAKING: pnt tr 101314.6 200210.8 -CJ 2011-Dec-15 06:03:08 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2011-Dec-15 06:03:08 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-15 06:03:08 LOG5 finish_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2011-Dec-15 06:03:08 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-15 06:03:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 06:03:08 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-15 06:03:08 LOG5 end_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2011-Dec-15 06:03:08 START begin_task: Starting task 'waiting on telescope' 2011-Dec-15 06:03:08 LOG5 begin_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2011-Dec-15 06:03:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-15 06:03:08 LOG3 waittrk: Start waittrk 5 2011-Dec-15 06:03:08 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-15 06:03:08 LOG5 begin_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2011-Dec-15 06:03:08 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2011-Dec-15 06:03:08 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2011-Dec-15 06:03:08 LOG4 got_cormsg: From DATATAKING: set ra 101314.6 2011-Dec-15 06:03:08 LOG4 got_cormsg: From DATATAKING: set dec 200210.8 2011-Dec-15 06:03:08 LOG4 got_cormsg: From DATATAKING: vw% 101314.6 2011-Dec-15 06:03:08 LOG4 got_cormsg: From DATATAKING: vw% 200210.8 2011-Dec-15 06:03:08 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:03:08 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-15 06:03:08 LOG4 got_cormsg: From DATATAKING: pnt tr 101314.6 200210.8 -CJ 2011-Dec-15 06:03:08 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2011-Dec-15 06:03:08 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-15 06:03:08 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:03:13 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-15 06:03:13 LOG5 end_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2011-Dec-15 06:03:13 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-15 06:03:13 LOG5 begin_task: Level: (4) ID = <10287> Status = 0 0 0 0 ok 2011-Dec-15 06:03:17 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-15 06:03:17 LOG5 end_task: Level: (4) ID = <10287> Status = 0 0 0 0 ok 2011-Dec-15 06:03:17 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-15 06:03:17 INFO2 waittrk: Now tracking Cur-pos 2011-Dec-15 06:03:17 LOG4 waittrk: Current telescope position: Az = 458.90 ZA = 13.61 2011-Dec-15 06:03:17 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-15 06:03:17 LOG5 finish_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2011-Dec-15 06:03:17 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-15 06:03:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 06:03:18 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-15 06:03:18 LOG5 end_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2011-Dec-15 06:03:18 STOP finish_task: Finishing task 'tracking current position' 2011-Dec-15 06:03:18 LOG5 finish_task: Level: (2) ID = <10283> Status = 0 0 0 0 ok 2011-Dec-15 06:03:18 DONE finish_task: DONE finished tracking: current position 2011-Dec-15 06:03:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-15 06:03:18 END end_task: Finishing task 'tracking current position' with status 'OK' 2011-Dec-15 06:03:18 LOG5 end_task: Level: (2) ID = <10283> Status = 0 0 0 0 ok 2011-Dec-15 06:03:18 COMMAND run_command_line: EXECUTING command 57: 'ALFAANGLE 19' 2011-Dec-15 06:03:18 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2011-Dec-15 06:03:18 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2011-Dec-15 06:03:18 LOG5 begin_task: Level: (2) ID = <10288> Status = 0 0 0 0 ok 2011-Dec-15 06:03:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2011-Dec-15 06:03:18 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2011-Dec-15 06:03:18 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2011-Dec-15 06:03:18 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-15 06:03:18 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-15 06:03:18 LOG5 begin_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2011-Dec-15 06:04:11 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-15 06:04:11 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2011-Dec-15 06:04:11 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-15 06:04:11 LOG5 end_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2011-Dec-15 06:04:11 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-15 06:04:11 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2011-Dec-15 06:04:11 LOG5 finish_task: Level: (2) ID = <10288> Status = 0 0 0 0 ok 2011-Dec-15 06:04:11 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2011-Dec-15 06:04:11 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-15 06:04:12 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2011-Dec-15 06:04:12 LOG5 end_task: Level: (2) ID = <10288> Status = 0 0 0 0 ok 2011-Dec-15 06:04:12 COMMAND run_command_line: EXECUTING command 61: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2011-Dec-15 06:04:12 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2011-Dec-15 06:04:12 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-15 06:04:12 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2011-Dec-15 06:04:12 BEGIN begin_task: Starting task 'smart frequency switching' 2011-Dec-15 06:04:12 LOG5 begin_task: Level: (2) ID = <10290> Status = 0 0 0 0 ok 2011-Dec-15 06:04:12 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2011-Dec-15 06:04:12 INFO1 smartfreq: Starting pattern: Smart frequency switching 2011-Dec-15 06:04:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2011-Dec-15 06:04:12 START begin_task: Starting task 'selecting calibration type' 2011-Dec-15 06:04:12 LOG5 begin_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2011-Dec-15 06:04:12 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-15 06:04:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-15 06:04:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 06:04:12 START begin_task: Starting task 'waiting on setcal' 2011-Dec-15 06:04:12 LOG5 begin_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2011-Dec-15 06:04:12 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-15 06:04:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 06:04:12 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:04:12 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-15 06:04:12 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-15 06:04:12 LOG5 end_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2011-Dec-15 06:04:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-15 06:04:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-15 06:04:12 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-15 06:04:12 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-15 06:04:12 LOG5 begin_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2011-Dec-15 06:04:12 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:04:12 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-15 06:04:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-15 06:04:12 LOG5 end_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2011-Dec-15 06:04:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-15 06:04:12 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-15 06:04:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-15 06:04:12 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-15 06:04:12 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-15 06:04:12 LOG5 begin_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2011-Dec-15 06:04:13 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-15 06:04:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-15 06:04:13 LOG5 end_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2011-Dec-15 06:04:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-15 06:04:13 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-15 06:04:13 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-15 06:04:13 LOG5 end_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2011-Dec-15 06:04:13 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2011-Dec-15 06:04:13 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2011-Dec-15 06:04:13 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2011-Dec-15 06:04:13 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2011-Dec-15 06:04:13 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2011-Dec-15 06:04:13 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-15 06:04:13 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2011-Dec-15 06:04:13 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-15 06:04:13 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-15 06:04:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-15 06:04:13 LOG5 begin_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2011-Dec-15 06:04:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2011-Dec-15 06:04:13 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-15 06:04:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-15 06:04:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-15 06:04:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-15 06:04:13 LOG5 end_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2011-Dec-15 06:04:13 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2011-Dec-15 06:04:13 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-15 06:04:13 LOG5 begin_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2011-Dec-15 06:04:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2011-Dec-15 06:04:13 INFO2 adjust_power: Starting to adjust WAPP power 2011-Dec-15 06:04:13 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-15 06:04:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-15 06:04:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 06:04:13 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-15 06:04:13 LOG5 begin_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2011-Dec-15 06:04:13 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-15 06:04:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-15 06:04:13 NOTE WAPPDATA-new_file: New FITS file: wapp.20111215.a2048.0007.fits 2011-Dec-15 06:04:14 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111215.a2048.0007.fits} 2011-Dec-15 06:04:15 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:04:15 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-15 06:04:15 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-15 06:04:15 LOG5 end_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2011-Dec-15 06:04:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-15 06:04:15 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-15 06:04:15 LOG5 begin_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2011-Dec-15 06:04:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-15 06:04:15 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-15 06:04:15 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-15 06:04:15 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-15 06:04:15 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-15 06:04:15 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-15 06:04:15 LOG5 begin_task: Level: (5) ID = <10299> Status = 0 0 0 0 ok 2011-Dec-15 06:04:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-15 06:04:15 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:04:15 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 8 6 dB 2011-Dec-15 06:04:15 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 3 3 dB 2011-Dec-15 06:04:15 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 3 dB 2011-Dec-15 06:04:15 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2011-Dec-15 06:04:15 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-15 06:04:15 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-15 06:04:15 LOG5 end_task: Level: (5) ID = <10299> Status = 0 0 0 0 ok 2011-Dec-15 06:04:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.911 1.118 ALFA beam 1: 0.955 1.011 2011-Dec-15 06:04:16 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.900 1.002 ALFA beam 3: 1.061 0.907 2011-Dec-15 06:04:16 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.841 0.896 ALFA beam 5: 0.963 1.115 2011-Dec-15 06:04:16 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.913 0.014 ALFA beam 7: 0.997 0.014 2011-Dec-15 06:04:16 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-15 06:04:16 LOG5 finish_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2011-Dec-15 06:04:16 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-15 06:04:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 06:04:16 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-15 06:04:16 LOG5 end_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2011-Dec-15 06:04:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-15 06:04:16 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-15 06:04:16 LOG5 finish_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2011-Dec-15 06:04:16 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2011-Dec-15 06:04:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-15 06:04:16 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-15 06:04:16 LOG5 end_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2011-Dec-15 06:04:16 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2011-Dec-15 06:04:16 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-15 06:04:16 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2011-Dec-15 06:04:16 LOG5 antvel: Calling 'antvel 101314.600000 200210.800000 J Topocentric 0' 2011-Dec-15 06:04:16 LOG2 antvel: Precessing RA = 10:13:14.6 Dec = +20:02:10.8 Epoch = 2011.95620 J 2011-Dec-15 06:04:16 LOG2 antvel: Computed apparent RA = 10:13:55.5 Dec = +19:58:23.5 2011-Dec-15 06:04:16 LOG2 antvel: Parameters to Doppler: Topocentric 36255 2011 349 0.0 2011-Dec-15 06:04:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-15 06:04:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2011-Dec-15 06:04:16 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2011-Dec-15 06:04:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-15 06:04:16 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-15 06:04:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-15 06:04:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 06:04:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2011-Dec-15 06:04:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-15 06:04:16 LOG5 begin_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2011-Dec-15 06:04:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-15 06:04:16 LOG5 log_alfabeam: Parameters: 10.220722222222223 20.036333333333332 11.201723 2011.9562024678683 18.999933 2011-Dec-15 06:04:16 LOG4 log_alfabeam: ALFABEAM 0 10.220722222222225 20.036333333333324 2011-Dec-15 06:04:16 LOG4 log_alfabeam: ALFABEAM 1 10.228224493557992 20.045770903623058 2011-Dec-15 06:04:16 LOG4 log_alfabeam: ALFABEAM 2 10.223655091622296 20.119698226346543 2011-Dec-15 06:04:16 LOG4 log_alfabeam: ALFABEAM 3 10.216145856532812 20.110647953882363 2011-Dec-15 06:04:16 LOG4 log_alfabeam: ALFABEAM 4 10.213221026981282 20.026564900140745 2011-Dec-15 06:04:16 LOG4 log_alfabeam: ALFABEAM 5 10.217827666723243 19.952494108523098 2011-Dec-15 06:04:16 LOG4 log_alfabeam: ALFABEAM 6 10.225321743832236 19.962649361628106 2011-Dec-15 06:04:16 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134900019 2011-Dec-15 06:04:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-15 06:04:16 LOG5 begin_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2011-Dec-15 06:04:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-15 06:04:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-15 06:04:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 06:04:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:04:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:04:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-15 06:04:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36257.00 2011-Dec-15 06:04:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-15 06:04:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:04:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:04:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-15 06:04:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:04:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 06:04:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 06:04:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-15 06:04:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-15 06:04:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-15 06:04:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.922 1.137 0.934 1.028 2011-Dec-15 06:04:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.900 1.002 1.061 0.907 2011-Dec-15 06:04:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.841 0.896 0.963 1.115 2011-Dec-15 06:04:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.891 0.014 0.973 0.014 2011-Dec-15 06:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.155 (still bad) 2011-Dec-15 06:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.146 (still bad) 2011-Dec-15 06:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.144 (still bad) 2011-Dec-15 06:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.150 (still bad) 2011-Dec-15 06:04:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-15 06:04:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-15 06:04:27 LOG5 end_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2011-Dec-15 06:04:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-15 06:04:27 LOG5 end_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2011-Dec-15 06:04:27 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2011-Dec-15 06:04:27 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-15 06:04:27 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2011-Dec-15 06:04:27 LOG5 antvel: Calling 'antvel 101314.600000 200210.800000 J Topocentric 0' 2011-Dec-15 06:04:27 LOG2 antvel: Precessing RA = 10:13:14.6 Dec = +20:02:10.8 Epoch = 2011.95620 J 2011-Dec-15 06:04:27 LOG2 antvel: Computed apparent RA = 10:13:55.5 Dec = +19:58:23.5 2011-Dec-15 06:04:27 LOG2 antvel: Parameters to Doppler: Topocentric 36267 2011 349 0.0 2011-Dec-15 06:04:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-15 06:04:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2011-Dec-15 06:04:27 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2011-Dec-15 06:04:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-15 06:04:27 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-15 06:04:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-15 06:04:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 06:04:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2011-Dec-15 06:04:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-15 06:04:27 LOG5 begin_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2011-Dec-15 06:04:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-15 06:04:27 LOG5 log_alfabeam: Parameters: 10.220722222222223 20.036333333333332 11.205066 2011.9562028481253 18.999933 2011-Dec-15 06:04:27 LOG4 log_alfabeam: ALFABEAM 0 10.220722222222225 20.036333333333321 2011-Dec-15 06:04:27 LOG4 log_alfabeam: ALFABEAM 1 10.228224126584482 20.045829291588387 2011-Dec-15 06:04:27 LOG4 log_alfabeam: ALFABEAM 2 10.223651786394692 20.119721680621588 2011-Dec-15 06:04:27 LOG4 log_alfabeam: ALFABEAM 3 10.216142917977930 20.110611448920199 2011-Dec-15 06:04:27 LOG4 log_alfabeam: ALFABEAM 4 10.213221408944396 20.026507434997903 2011-Dec-15 06:04:27 LOG4 log_alfabeam: ALFABEAM 5 10.217830863304872 19.952472581441150 2011-Dec-15 06:04:27 LOG4 log_alfabeam: ALFABEAM 6 10.225324559532499 19.962683730489381 2011-Dec-15 06:04:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134900020 2011-Dec-15 06:04:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-15 06:04:28 LOG5 begin_task: Level: (4) ID = <10303> Status = 0 0 0 0 ok 2011-Dec-15 06:04:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-15 06:04:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-15 06:04:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 06:04:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:04:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:04:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-15 06:04:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36269.00 2011-Dec-15 06:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.145 (still bad) 2011-Dec-15 06:04:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-15 06:04:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:04:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:04:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-15 06:04:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:04:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 06:04:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 06:04:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-15 06:04:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-15 06:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.179 (still bad) 2011-Dec-15 06:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.182 (still bad) 2011-Dec-15 06:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.177 (still bad) 2011-Dec-15 06:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.177 (still bad) 2011-Dec-15 06:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.180 (still bad) 2011-Dec-15 06:04:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-15 06:04:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-15 06:04:39 LOG5 end_task: Level: (4) ID = <10303> Status = 0 0 0 0 ok 2011-Dec-15 06:04:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-15 06:04:39 LOG5 end_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2011-Dec-15 06:04:39 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2011-Dec-15 06:04:39 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-15 06:04:39 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2011-Dec-15 06:04:39 LOG5 antvel: Calling 'antvel 101314.600000 200210.800000 J Topocentric 0' 2011-Dec-15 06:04:39 LOG2 antvel: Precessing RA = 10:13:14.6 Dec = +20:02:10.8 Epoch = 2011.95620 J 2011-Dec-15 06:04:39 LOG2 antvel: Computed apparent RA = 10:13:55.5 Dec = +19:58:23.5 2011-Dec-15 06:04:39 LOG2 antvel: Parameters to Doppler: Topocentric 36279 2011 349 0.0 2011-Dec-15 06:04:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-15 06:04:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2011-Dec-15 06:04:39 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2011-Dec-15 06:04:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-15 06:04:39 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-15 06:04:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-15 06:04:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 06:04:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2011-Dec-15 06:04:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-15 06:04:39 LOG5 begin_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2011-Dec-15 06:04:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-15 06:04:39 LOG5 log_alfabeam: Parameters: 10.220722222222223 20.036333333333332 11.208408 2011.9562032283823 18.999933 2011-Dec-15 06:04:39 LOG4 log_alfabeam: ALFABEAM 0 10.220722222222223 20.036333333333317 2011-Dec-15 06:04:39 LOG4 log_alfabeam: ALFABEAM 1 10.228223759248481 20.045887372404934 2011-Dec-15 06:04:39 LOG4 log_alfabeam: ALFABEAM 2 10.223648497515670 20.119744985774862 2011-Dec-15 06:04:39 LOG4 log_alfabeam: ALFABEAM 3 10.216139996239043 20.110575112791256 2011-Dec-15 06:04:39 LOG4 log_alfabeam: ALFABEAM 4 10.213221791121400 20.026450270786700 2011-Dec-15 06:04:39 LOG4 log_alfabeam: ALFABEAM 5 10.217834044170306 19.952451188951663 2011-Dec-15 06:04:39 LOG4 log_alfabeam: ALFABEAM 6 10.225327359392610 19.962717943814379 2011-Dec-15 06:04:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134900021 2011-Dec-15 06:04:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-15 06:04:40 LOG5 begin_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2011-Dec-15 06:04:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-15 06:04:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-15 06:04:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 06:04:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:04:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:04:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-15 06:04:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36281.00 2011-Dec-15 06:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.179 (still bad) 2011-Dec-15 06:04:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-15 06:04:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:04:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:04:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-15 06:04:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:04:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 06:04:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 06:04:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-15 06:04:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-15 06:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.176 (still bad) 2011-Dec-15 06:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.180 (still bad) 2011-Dec-15 06:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.175 (still bad) 2011-Dec-15 06:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.181 (still bad) 2011-Dec-15 06:04:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-15 06:04:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-15 06:04:51 LOG5 end_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2011-Dec-15 06:04:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-15 06:04:51 LOG5 end_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2011-Dec-15 06:04:51 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2011-Dec-15 06:04:51 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-15 06:04:51 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2011-Dec-15 06:04:51 LOG5 antvel: Calling 'antvel 101314.600000 200210.800000 J Topocentric 0' 2011-Dec-15 06:04:51 LOG2 antvel: Precessing RA = 10:13:14.6 Dec = +20:02:10.8 Epoch = 2011.95620 J 2011-Dec-15 06:04:51 LOG2 antvel: Computed apparent RA = 10:13:55.5 Dec = +19:58:23.5 2011-Dec-15 06:04:51 LOG2 antvel: Parameters to Doppler: Topocentric 36291 2011 349 0.0 2011-Dec-15 06:04:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-15 06:04:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2011-Dec-15 06:04:51 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2011-Dec-15 06:04:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-15 06:04:51 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-15 06:04:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-15 06:04:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 06:04:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2011-Dec-15 06:04:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-15 06:04:51 LOG5 begin_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2011-Dec-15 06:04:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-15 06:04:51 LOG5 log_alfabeam: Parameters: 10.220722222222223 20.036333333333332 11.211751 2011.9562036086395 18.999933 2011-Dec-15 06:04:51 LOG4 log_alfabeam: ALFABEAM 0 10.220722222222225 20.036333333333332 2011-Dec-15 06:04:51 LOG4 log_alfabeam: ALFABEAM 1 10.228223391345356 20.045945183758324 2011-Dec-15 06:04:51 LOG4 log_alfabeam: ALFABEAM 2 10.223645222866978 20.119768157302101 2011-Dec-15 06:04:51 LOG4 log_alfabeam: ALFABEAM 3 10.216137089400487 20.110538922269171 2011-Dec-15 06:04:51 LOG4 log_alfabeam: ALFABEAM 4 10.213222173727782 20.026393370427936 2011-Dec-15 06:04:51 LOG4 log_alfabeam: ALFABEAM 5 10.217837211368261 19.952429916854207 2011-Dec-15 06:04:51 LOG4 log_alfabeam: ALFABEAM 6 10.225330145244762 19.962752023446676 2011-Dec-15 06:04:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134900022 2011-Dec-15 06:04:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-15 06:04:52 LOG5 begin_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2011-Dec-15 06:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.177 (still bad) 2011-Dec-15 06:04:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-15 06:04:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-15 06:04:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 06:04:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:04:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:04:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-15 06:04:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36293.00 2011-Dec-15 06:04:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-15 06:04:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:04:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:04:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-15 06:04:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:04:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 06:04:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 06:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.166 (still bad) 2011-Dec-15 06:04:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-15 06:04:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-15 06:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.167 (still bad) 2011-Dec-15 06:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.166 (still bad) 2011-Dec-15 06:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.166 (still bad) 2011-Dec-15 06:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.167 (still bad) 2011-Dec-15 06:05:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-15 06:05:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-15 06:05:03 LOG5 end_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2011-Dec-15 06:05:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-15 06:05:03 LOG5 end_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2011-Dec-15 06:05:03 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2011-Dec-15 06:05:03 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-15 06:05:03 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2011-Dec-15 06:05:03 LOG5 antvel: Calling 'antvel 101314.600000 200210.800000 J Topocentric 0' 2011-Dec-15 06:05:03 LOG2 antvel: Precessing RA = 10:13:14.6 Dec = +20:02:10.8 Epoch = 2011.95620 J 2011-Dec-15 06:05:03 LOG2 antvel: Computed apparent RA = 10:13:55.5 Dec = +19:58:23.5 2011-Dec-15 06:05:03 LOG2 antvel: Parameters to Doppler: Topocentric 36303 2011 349 0.0 2011-Dec-15 06:05:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-15 06:05:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2011-Dec-15 06:05:03 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2011-Dec-15 06:05:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-15 06:05:03 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-15 06:05:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-15 06:05:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 06:05:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2011-Dec-15 06:05:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-15 06:05:03 LOG5 begin_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2011-Dec-15 06:05:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-15 06:05:03 LOG5 log_alfabeam: Parameters: 10.220722222222223 20.036333333333332 11.215093 2011.9562039888965 18.999933 2011-Dec-15 06:05:03 LOG4 log_alfabeam: ALFABEAM 0 10.220722222222225 20.036333333333328 2011-Dec-15 06:05:03 LOG4 log_alfabeam: ALFABEAM 1 10.228223023110010 20.046002693949646 2011-Dec-15 06:05:03 LOG4 log_alfabeam: ALFABEAM 2 10.223641964259636 20.119791182866543 2011-Dec-15 06:05:03 LOG4 log_alfabeam: ALFABEAM 3 10.216134199036503 20.110502897542730 2011-Dec-15 06:05:03 LOG4 log_alfabeam: ALFABEAM 4 10.213222556521742 20.026336765132612 2011-Dec-15 06:05:03 LOG4 log_alfabeam: ALFABEAM 5 10.217840363147150 19.952408776497780 2011-Dec-15 06:05:03 LOG4 log_alfabeam: ALFABEAM 6 10.225332915576688 19.962785950349335 2011-Dec-15 06:05:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134900023 2011-Dec-15 06:05:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-15 06:05:04 LOG5 begin_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2011-Dec-15 06:05:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-15 06:05:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-15 06:05:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 06:05:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:05:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.166 (still bad) 2011-Dec-15 06:05:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-15 06:05:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36305.00 2011-Dec-15 06:05:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-15 06:05:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:05:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:05:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-15 06:05:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:05:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 06:05:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 06:05:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-15 06:05:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-15 06:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.154 (still bad) 2011-Dec-15 06:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.144 (still bad) 2011-Dec-15 06:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.141 (still bad) 2011-Dec-15 06:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.142 (still bad) 2011-Dec-15 06:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.145 (still bad) 2011-Dec-15 06:05:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-15 06:05:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-15 06:05:15 LOG5 end_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2011-Dec-15 06:05:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-15 06:05:15 LOG5 end_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2011-Dec-15 06:05:15 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2011-Dec-15 06:05:15 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-15 06:05:15 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2011-Dec-15 06:05:15 LOG5 antvel: Calling 'antvel 101314.600000 200210.800000 J Topocentric 0' 2011-Dec-15 06:05:15 LOG2 antvel: Precessing RA = 10:13:14.6 Dec = +20:02:10.8 Epoch = 2011.95620 J 2011-Dec-15 06:05:15 LOG2 antvel: Computed apparent RA = 10:13:55.5 Dec = +19:58:23.5 2011-Dec-15 06:05:15 LOG2 antvel: Parameters to Doppler: Topocentric 36315 2011 349 0.0 2011-Dec-15 06:05:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-15 06:05:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2011-Dec-15 06:05:15 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2011-Dec-15 06:05:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-15 06:05:15 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-15 06:05:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-15 06:05:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 06:05:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2011-Dec-15 06:05:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-15 06:05:15 LOG5 begin_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2011-Dec-15 06:05:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-15 06:05:15 LOG5 log_alfabeam: Parameters: 10.220722222222223 20.036333333333332 11.218436 2011.9562043691535 18.999933 2011-Dec-15 06:05:15 LOG4 log_alfabeam: ALFABEAM 0 10.220722222222225 20.036333333333332 2011-Dec-15 06:05:15 LOG4 log_alfabeam: ALFABEAM 1 10.228222654336539 20.046059940246209 2011-Dec-15 06:05:15 LOG4 log_alfabeam: ALFABEAM 2 10.223638719597295 20.119814077752331 2011-Dec-15 06:05:15 LOG4 log_alfabeam: ALFABEAM 3 10.216131323254771 20.110467015607227 2011-Dec-15 06:05:15 LOG4 log_alfabeam: ALFABEAM 4 10.213222939719792 20.026280418231380 2011-Dec-15 06:05:15 LOG4 log_alfabeam: ALFABEAM 5 10.217843501534604 19.952387753872873 2011-Dec-15 06:05:15 LOG4 log_alfabeam: ALFABEAM 6 10.225335672198645 19.962819746161767 2011-Dec-15 06:05:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134900024 2011-Dec-15 06:05:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-15 06:05:16 LOG5 begin_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2011-Dec-15 06:05:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-15 06:05:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-15 06:05:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 06:05:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:05:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:05:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-15 06:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.143 (still bad) 2011-Dec-15 06:05:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36317.00 2011-Dec-15 06:05:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-15 06:05:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:05:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:05:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-15 06:05:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:05:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 06:05:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 06:05:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-15 06:05:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-15 06:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.140 (still bad) 2011-Dec-15 06:05:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-15 06:05:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.920 1.136 0.966 1.026 2011-Dec-15 06:05:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.910 1.013 1.069 0.917 2011-Dec-15 06:05:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.848 0.905 0.970 1.141 2011-Dec-15 06:05:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.024 1.005 0.024 2011-Dec-15 06:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.140 (still bad) 2011-Dec-15 06:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-15 06:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.139 (still bad) 2011-Dec-15 06:05:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-15 06:05:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-15 06:05:27 LOG5 end_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2011-Dec-15 06:05:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-15 06:05:27 LOG5 end_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2011-Dec-15 06:05:27 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2011-Dec-15 06:05:27 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-15 06:05:27 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2011-Dec-15 06:05:27 LOG5 antvel: Calling 'antvel 101314.600000 200210.800000 J Topocentric 0' 2011-Dec-15 06:05:27 LOG2 antvel: Precessing RA = 10:13:14.6 Dec = +20:02:10.8 Epoch = 2011.95620 J 2011-Dec-15 06:05:27 LOG2 antvel: Computed apparent RA = 10:13:55.5 Dec = +19:58:23.5 2011-Dec-15 06:05:27 LOG2 antvel: Parameters to Doppler: Topocentric 36327 2011 349 0.0 2011-Dec-15 06:05:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-15 06:05:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2011-Dec-15 06:05:27 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2011-Dec-15 06:05:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-15 06:05:27 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-15 06:05:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-15 06:05:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 06:05:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2011-Dec-15 06:05:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-15 06:05:27 LOG5 begin_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2011-Dec-15 06:05:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-15 06:05:27 LOG5 log_alfabeam: Parameters: 10.220722222222223 20.036333333333332 11.221778 2011.9562047494105 18.999933 2011-Dec-15 06:05:27 LOG4 log_alfabeam: ALFABEAM 0 10.220722222222221 20.036333333333328 2011-Dec-15 06:05:27 LOG4 log_alfabeam: ALFABEAM 1 10.228222285259660 20.046116891211526 2011-Dec-15 06:05:27 LOG4 log_alfabeam: ALFABEAM 2 10.223635490676758 20.119836829744759 2011-Dec-15 06:05:27 LOG4 log_alfabeam: ALFABEAM 3 10.216128463615474 20.110431296501488 2011-Dec-15 06:05:27 LOG4 log_alfabeam: ALFABEAM 4 10.213223323080415 20.026224360678277 2011-Dec-15 06:05:27 LOG4 log_alfabeam: ALFABEAM 5 10.217846624792655 19.952366860218476 2011-Dec-15 06:05:27 LOG4 log_alfabeam: ALFABEAM 6 10.225338413611645 19.962853391984666 2011-Dec-15 06:05:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134900025 2011-Dec-15 06:05:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-15 06:05:28 LOG5 begin_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2011-Dec-15 06:05:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-15 06:05:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-15 06:05:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 06:05:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:05:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:05:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-15 06:05:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36329.00 2011-Dec-15 06:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-15 06:05:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-15 06:05:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:05:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:05:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-15 06:05:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:05:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 06:05:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 06:05:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-15 06:05:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-15 06:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-15 06:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-15 06:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-15 06:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-15 06:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-15 06:05:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-15 06:05:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-15 06:05:39 LOG5 end_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2011-Dec-15 06:05:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-15 06:05:39 LOG5 end_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2011-Dec-15 06:05:39 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2011-Dec-15 06:05:39 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-15 06:05:39 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-15 06:05:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-15 06:05:39 LOG5 begin_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2011-Dec-15 06:05:39 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-15 06:05:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-15 06:05:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-15 06:05:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-15 06:05:39 LOG5 end_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2011-Dec-15 06:05:39 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2011-Dec-15 06:05:39 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2011-Dec-15 06:05:39 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2011-Dec-15 06:05:39 LOG5 antvel: Calling 'antvel 101314.600000 200210.800000 J Topocentric 0' 2011-Dec-15 06:05:39 LOG2 antvel: Precessing RA = 10:13:14.6 Dec = +20:02:10.8 Epoch = 2011.95621 J 2011-Dec-15 06:05:39 LOG2 antvel: Computed apparent RA = 10:13:55.5 Dec = +19:58:23.5 2011-Dec-15 06:05:39 LOG2 antvel: Parameters to Doppler: Topocentric 36339 2011 349 0.0 2011-Dec-15 06:05:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-15 06:05:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2011-Dec-15 06:05:39 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2011-Dec-15 06:05:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-15 06:05:39 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-15 06:05:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-15 06:05:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 06:05:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2011-Dec-15 06:05:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-15 06:05:39 LOG5 begin_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2011-Dec-15 06:05:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2011-Dec-15 06:05:39 LOG5 log_alfabeam: Parameters: 10.220722222222223 20.036333333333332 11.225120 2011.9562051296675 18.999933 2011-Dec-15 06:05:39 LOG4 log_alfabeam: ALFABEAM 0 10.220722222222225 20.036333333333332 2011-Dec-15 06:05:39 LOG4 log_alfabeam: ALFABEAM 1 10.228221915782891 20.046173566786223 2011-Dec-15 06:05:39 LOG4 log_alfabeam: ALFABEAM 2 10.223632276382713 20.119859447173909 2011-Dec-15 06:05:39 LOG4 log_alfabeam: ALFABEAM 3 10.216125619098008 20.110395728058453 2011-Dec-15 06:05:39 LOG4 log_alfabeam: ALFABEAM 4 10.213223706706286 20.026168572857639 2011-Dec-15 06:05:39 LOG4 log_alfabeam: ALFABEAM 5 10.217849734000067 19.952346087908932 2011-Dec-15 06:05:39 LOG4 log_alfabeam: ALFABEAM 6 10.225341140790597 19.962886899251963 2011-Dec-15 06:05:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134900026 2011-Dec-15 06:05:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-15 06:05:40 LOG5 begin_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2011-Dec-15 06:05:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-15 06:05:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-15 06:05:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 06:05:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:05:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:05:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2011-Dec-15 06:05:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36341.00 2011-Dec-15 06:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-15 06:05:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-15 06:05:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:05:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:05:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-15 06:05:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:05:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 06:05:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 06:05:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-15 06:05:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-15 06:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.555 (still bad) 2011-Dec-15 06:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.550 (still bad) 2011-Dec-15 06:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.543 (still bad) 2011-Dec-15 06:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.553 (still bad) 2011-Dec-15 06:05:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-15 06:05:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-15 06:05:51 LOG5 end_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2011-Dec-15 06:05:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-15 06:05:51 LOG5 end_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2011-Dec-15 06:05:51 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2011-Dec-15 06:05:51 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2011-Dec-15 06:05:51 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2011-Dec-15 06:05:51 LOG5 antvel: Calling 'antvel 101314.600000 200210.800000 J Topocentric 0' 2011-Dec-15 06:05:51 LOG2 antvel: Precessing RA = 10:13:14.6 Dec = +20:02:10.8 Epoch = 2011.95621 J 2011-Dec-15 06:05:51 LOG2 antvel: Computed apparent RA = 10:13:55.5 Dec = +19:58:23.5 2011-Dec-15 06:05:51 LOG2 antvel: Parameters to Doppler: Topocentric 36351 2011 349 0.0 2011-Dec-15 06:05:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-15 06:05:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2011-Dec-15 06:05:51 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2011-Dec-15 06:05:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-15 06:05:51 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-15 06:05:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-15 06:05:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 06:05:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2011-Dec-15 06:05:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-15 06:05:51 LOG5 begin_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2011-Dec-15 06:05:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2011-Dec-15 06:05:51 LOG5 log_alfabeam: Parameters: 10.220722222222223 20.036333333333332 11.228463 2011.9562055099248 18.999933 2011-Dec-15 06:05:51 LOG4 log_alfabeam: ALFABEAM 0 10.220722222222220 20.036333333333317 2011-Dec-15 06:05:51 LOG4 log_alfabeam: ALFABEAM 1 10.228221545808918 20.046229986544969 2011-Dec-15 06:05:51 LOG4 log_alfabeam: ALFABEAM 2 10.223629075619122 20.119881938187977 2011-Dec-15 06:05:51 LOG4 log_alfabeam: ALFABEAM 3 10.216122788702011 20.110360298308059 2011-Dec-15 06:05:51 LOG4 log_alfabeam: ALFABEAM 4 10.213224090700674 20.026113035512083 2011-Dec-15 06:05:51 LOG4 log_alfabeam: ALFABEAM 5 10.217852830217018 19.952325429482599 2011-Dec-15 06:05:51 LOG4 log_alfabeam: ALFABEAM 6 10.225343854691319 19.962920279216156 2011-Dec-15 06:05:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134900027 2011-Dec-15 06:05:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-15 06:05:52 LOG5 begin_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2011-Dec-15 06:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.546 (still bad) 2011-Dec-15 06:05:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-15 06:05:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-15 06:05:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 06:05:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:05:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:05:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2011-Dec-15 06:05:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36353.00 2011-Dec-15 06:05:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-15 06:05:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:05:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:05:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-15 06:05:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:05:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 06:05:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 06:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.543 (still bad) 2011-Dec-15 06:05:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-15 06:05:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-15 06:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.595 (still bad) 2011-Dec-15 06:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.590 (still bad) 2011-Dec-15 06:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.587 (still bad) 2011-Dec-15 06:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.592 (still bad) 2011-Dec-15 06:06:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-15 06:06:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-15 06:06:03 LOG5 end_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2011-Dec-15 06:06:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-15 06:06:03 LOG5 end_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2011-Dec-15 06:06:03 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2011-Dec-15 06:06:03 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2011-Dec-15 06:06:03 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2011-Dec-15 06:06:03 LOG5 antvel: Calling 'antvel 101314.600000 200210.800000 J Topocentric 0' 2011-Dec-15 06:06:03 LOG2 antvel: Precessing RA = 10:13:14.6 Dec = +20:02:10.8 Epoch = 2011.95621 J 2011-Dec-15 06:06:03 LOG2 antvel: Computed apparent RA = 10:13:55.5 Dec = +19:58:23.5 2011-Dec-15 06:06:03 LOG2 antvel: Parameters to Doppler: Topocentric 36363 2011 349 0.0 2011-Dec-15 06:06:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-15 06:06:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2011-Dec-15 06:06:03 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2011-Dec-15 06:06:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-15 06:06:03 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-15 06:06:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-15 06:06:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 06:06:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2011-Dec-15 06:06:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-15 06:06:03 LOG5 begin_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2011-Dec-15 06:06:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2011-Dec-15 06:06:03 LOG5 log_alfabeam: Parameters: 10.220722222222223 20.036333333333332 11.231805 2011.9562058901818 18.999933 2011-Dec-15 06:06:03 LOG4 log_alfabeam: ALFABEAM 0 10.220722222222228 20.036333333333321 2011-Dec-15 06:06:03 LOG4 log_alfabeam: ALFABEAM 1 10.228221175572166 20.046286119436971 2011-Dec-15 06:06:03 LOG4 log_alfabeam: ALFABEAM 2 10.223625890161911 20.119904290751563 2011-Dec-15 06:06:03 LOG4 log_alfabeam: ALFABEAM 3 10.216119973966993 20.110325027068878 2011-Dec-15 06:06:03 LOG4 log_alfabeam: ALFABEAM 4 10.213224474822514 20.026057779218132 2011-Dec-15 06:06:03 LOG4 log_alfabeam: ALFABEAM 5 10.217855911725556 19.952304896016940 2011-Dec-15 06:06:03 LOG4 log_alfabeam: ALFABEAM 6 10.225346553834376 19.962953513180203 2011-Dec-15 06:06:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134900028 2011-Dec-15 06:06:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-15 06:06:04 LOG5 begin_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2011-Dec-15 06:06:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-15 06:06:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-15 06:06:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 06:06:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:06:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.588 (still bad) 2011-Dec-15 06:06:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2011-Dec-15 06:06:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36365.00 2011-Dec-15 06:06:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-15 06:06:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:06:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:06:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-15 06:06:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:06:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 06:06:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 06:06:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-15 06:06:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-15 06:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.588 (still bad) 2011-Dec-15 06:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.596 (still bad) 2011-Dec-15 06:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.585 (still bad) 2011-Dec-15 06:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.582 (still bad) 2011-Dec-15 06:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.585 (still bad) 2011-Dec-15 06:06:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-15 06:06:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-15 06:06:15 LOG5 end_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2011-Dec-15 06:06:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-15 06:06:15 LOG5 end_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2011-Dec-15 06:06:15 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2011-Dec-15 06:06:15 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2011-Dec-15 06:06:15 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2011-Dec-15 06:06:15 LOG5 antvel: Calling 'antvel 101314.600000 200210.800000 J Topocentric 0' 2011-Dec-15 06:06:15 LOG2 antvel: Precessing RA = 10:13:14.6 Dec = +20:02:10.8 Epoch = 2011.95621 J 2011-Dec-15 06:06:15 LOG2 antvel: Computed apparent RA = 10:13:55.5 Dec = +19:58:23.5 2011-Dec-15 06:06:15 LOG2 antvel: Parameters to Doppler: Topocentric 36375 2011 349 0.0 2011-Dec-15 06:06:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-15 06:06:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2011-Dec-15 06:06:15 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2011-Dec-15 06:06:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-15 06:06:15 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-15 06:06:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-15 06:06:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 06:06:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2011-Dec-15 06:06:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-15 06:06:15 LOG5 begin_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2011-Dec-15 06:06:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2011-Dec-15 06:06:15 LOG5 log_alfabeam: Parameters: 10.220722222222223 20.036333333333332 11.235148 2011.9562062704388 18.999933 2011-Dec-15 06:06:15 LOG4 log_alfabeam: ALFABEAM 0 10.220722222222223 20.036333333333328 2011-Dec-15 06:06:15 LOG4 log_alfabeam: ALFABEAM 1 10.228220804863845 20.046342001723819 2011-Dec-15 06:06:15 LOG4 log_alfabeam: ALFABEAM 2 10.223622717967402 20.119926519642039 2011-Dec-15 06:06:15 LOG4 log_alfabeam: ALFABEAM 3 10.216117173056665 20.110289891870874 2011-Dec-15 06:06:15 LOG4 log_alfabeam: ALFABEAM 4 10.213224859290644 20.026002768291750 2011-Dec-15 06:06:15 LOG4 log_alfabeam: ALFABEAM 5 10.217858980502552 19.952284473959779 2011-Dec-15 06:06:15 LOG4 log_alfabeam: ALFABEAM 6 10.225349239977312 19.962986622291027 2011-Dec-15 06:06:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134900029 2011-Dec-15 06:06:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-15 06:06:16 LOG5 begin_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2011-Dec-15 06:06:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-15 06:06:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-15 06:06:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 06:06:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:06:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:06:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2011-Dec-15 06:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.583 (still bad) 2011-Dec-15 06:06:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36377.00 2011-Dec-15 06:06:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-15 06:06:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:06:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:06:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-15 06:06:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:06:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 06:06:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 06:06:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-15 06:06:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-15 06:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.583 (still bad) 2011-Dec-15 06:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.580 (still bad) 2011-Dec-15 06:06:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-15 06:06:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.306 1.566 1.303 1.380 2011-Dec-15 06:06:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.277 1.413 1.535 1.280 2011-Dec-15 06:06:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 1.290 1.401 1.574 2011-Dec-15 06:06:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.312 0.024 1.433 0.024 2011-Dec-15 06:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.569 (still bad) 2011-Dec-15 06:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.571 (still bad) 2011-Dec-15 06:06:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-15 06:06:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-15 06:06:27 LOG5 end_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2011-Dec-15 06:06:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-15 06:06:27 LOG5 end_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2011-Dec-15 06:06:27 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2011-Dec-15 06:06:27 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2011-Dec-15 06:06:27 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2011-Dec-15 06:06:27 LOG5 antvel: Calling 'antvel 101314.600000 200210.800000 J Topocentric 0' 2011-Dec-15 06:06:27 LOG2 antvel: Precessing RA = 10:13:14.6 Dec = +20:02:10.8 Epoch = 2011.95621 J 2011-Dec-15 06:06:27 LOG2 antvel: Computed apparent RA = 10:13:55.5 Dec = +19:58:23.5 2011-Dec-15 06:06:27 LOG2 antvel: Parameters to Doppler: Topocentric 36387 2011 349 0.0 2011-Dec-15 06:06:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-15 06:06:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2011-Dec-15 06:06:27 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2011-Dec-15 06:06:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-15 06:06:27 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-15 06:06:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-15 06:06:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 06:06:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2011-Dec-15 06:06:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-15 06:06:27 LOG5 begin_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2011-Dec-15 06:06:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2011-Dec-15 06:06:27 LOG5 log_alfabeam: Parameters: 10.220722222222223 20.036333333333332 11.238490 2011.9562066506958 18.999933 2011-Dec-15 06:06:27 LOG4 log_alfabeam: ALFABEAM 0 10.220722222222225 20.036333333333332 2011-Dec-15 06:06:27 LOG4 log_alfabeam: ALFABEAM 1 10.228220433918210 20.046397602606632 2011-Dec-15 06:06:27 LOG4 log_alfabeam: ALFABEAM 2 10.223619560797863 20.119948612941066 2011-Dec-15 06:06:27 LOG4 log_alfabeam: ALFABEAM 3 10.216114387497036 20.110254912388591 2011-Dec-15 06:06:27 LOG4 log_alfabeam: ALFABEAM 4 10.213225243864294 20.025948033062807 2011-Dec-15 06:06:27 LOG4 log_alfabeam: ALFABEAM 5 10.217862034843121 19.952264174283155 2011-Dec-15 06:06:27 LOG4 log_alfabeam: ALFABEAM 6 10.225351911653425 19.963019587983730 2011-Dec-15 06:06:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134900030 2011-Dec-15 06:06:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-15 06:06:28 LOG5 begin_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2011-Dec-15 06:06:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-15 06:06:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-15 06:06:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 06:06:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:06:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:06:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2011-Dec-15 06:06:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36389.00 2011-Dec-15 06:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.569 (still bad) 2011-Dec-15 06:06:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-15 06:06:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:06:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:06:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-15 06:06:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:06:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 06:06:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-15 06:06:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-15 06:06:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-15 06:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.543 (still bad) 2011-Dec-15 06:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.542 (still bad) 2011-Dec-15 06:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.537 (still bad) 2011-Dec-15 06:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.540 (still bad) 2011-Dec-15 06:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.539 (still bad) 2011-Dec-15 06:06:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-15 06:06:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-15 06:06:39 LOG5 end_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2011-Dec-15 06:06:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-15 06:06:39 LOG5 end_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2011-Dec-15 06:06:39 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2011-Dec-15 06:06:39 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2011-Dec-15 06:06:39 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2011-Dec-15 06:06:39 LOG5 antvel: Calling 'antvel 101314.600000 200210.800000 J Topocentric 0' 2011-Dec-15 06:06:39 LOG2 antvel: Precessing RA = 10:13:14.6 Dec = +20:02:10.8 Epoch = 2011.95621 J 2011-Dec-15 06:06:39 LOG2 antvel: Computed apparent RA = 10:13:55.5 Dec = +19:58:23.5 2011-Dec-15 06:06:39 LOG2 antvel: Parameters to Doppler: Topocentric 36399 2011 349 0.0 2011-Dec-15 06:06:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-15 06:06:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2011-Dec-15 06:06:39 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2011-Dec-15 06:06:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-15 06:06:39 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-15 06:06:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-15 06:06:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 06:06:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2011-Dec-15 06:06:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-15 06:06:39 LOG5 begin_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2011-Dec-15 06:06:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2011-Dec-15 06:06:39 LOG5 log_alfabeam: Parameters: 10.220722222222223 20.036333333333332 11.241833 2011.956207030953 18.999933 2011-Dec-15 06:06:39 LOG4 log_alfabeam: ALFABEAM 0 10.220722222222225 20.036333333333332 2011-Dec-15 06:06:39 LOG4 log_alfabeam: ALFABEAM 1 10.228220062525420 20.046452957960053 2011-Dec-15 06:06:39 LOG4 log_alfabeam: ALFABEAM 2 10.223616416629973 20.119970585231748 2011-Dec-15 06:06:39 LOG4 log_alfabeam: ALFABEAM 3 10.216111615473363 20.110220066358451 2011-Dec-15 06:06:39 LOG4 log_alfabeam: ALFABEAM 4 10.213225628763134 20.025893538226281 2011-Dec-15 06:06:39 LOG4 log_alfabeam: ALFABEAM 5 10.217865076704594 19.952243983610128 2011-Dec-15 06:06:39 LOG4 log_alfabeam: ALFABEAM 6 10.225354570600057 19.963052431215189 2011-Dec-15 06:06:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134900031 2011-Dec-15 06:06:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-15 06:06:40 LOG5 begin_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2011-Dec-15 06:06:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-15 06:06:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-15 06:06:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-15 06:06:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:06:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-15 06:06:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2011-Dec-15 06:06:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36401.00 2011-Dec-15 06:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.539 (still bad) 2011-Dec-15 06:06:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-15 06:06:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:06:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-15 06:06:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2011-Dec-15 06:06:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Cha