2011-Dec-14 03:46:31 BEGIN executive: CIMA executive starting ... 2011-Dec-14 03:46:32 NOTE executive: STARTING NEW CIMA SESSION 2011-Dec-14 03:46:32 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2011-Dec-14 03:46:32 INFO4 executive: This is an ON-LINE session 2011-Dec-14 03:46:32 INFO4 executive: This is a LOCAL session 2011-Dec-14 03:46:32 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2011-Dec-14 03:46:32 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'Ellioty Gonzalez' 2011-Dec-14 03:46:32 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20111214' 2011-Dec-14 03:46:32 LOG2 log_preferences: Currently applied preferences: 2011-Dec-14 03:46:32 LOG2 log_preferences: prefs(dailylog) = daily 2011-Dec-14 03:46:32 LOG2 log_preferences: prefs(offlinelog) = skip 2011-Dec-14 03:46:32 LOG2 log_preferences: prefs(datawindow) = ignore 2011-Dec-14 03:46:32 LOG2 log_preferences: prefs(limitwarning) = enabled 2011-Dec-14 03:46:32 LOG2 log_preferences: prefs(wappfailure) = abort 2011-Dec-14 03:46:32 LOG2 log_preferences: prefs(helpstyle) = stay-open 2011-Dec-14 03:46:32 LOG2 log_preferences: prefs(logcolours) = full 2011-Dec-14 03:46:32 LOG2 log_preferences: prefs(displaylevel) = INFO3 2011-Dec-14 03:46:32 LOG2 log_preferences: prefs(loglevel) = LOG5 2011-Dec-14 03:46:32 LOG2 log_preferences: prefs(displayformat) = short 2011-Dec-14 03:46:32 LOG2 log_preferences: prefs(logformat) = new 2011-Dec-14 03:46:32 LOG2 log_preferences: prefs(fontsize) = 4 2011-Dec-14 03:46:32 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2011-Dec-14 03:46:32 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2011-Dec-14 03:46:32 ALERT executive: CIMA executive ready 2011-Dec-14 03:46:33 NOTE frontend: CIMA frontend ready 2011-Dec-14 03:46:34 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:46:34 LOG4 got_cormsg: From DATATAKING: setup 2011-Dec-14 03:46:36 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2011-Dec-14 03:46:36 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2011-Dec-14 03:46:36 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2011-Dec-14 03:46:36 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2011-Dec-14 03:46:36 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Dec-14 03:46:36 NOTE select_receiver: Starting to select receiver ALFA 2011-Dec-14 03:46:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2011-Dec-14 03:46:36 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2011-Dec-14 03:46:36 LOG3 vw_send: To DATATAKING: acvlbical off 2011-Dec-14 03:46:36 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2011-Dec-14 03:46:36 STOP finish_task: Finishing task 'selecting receiver ALFA' 2011-Dec-14 03:46:36 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Dec-14 03:46:36 DONE finish_task: DONE finished selecting: receiver ALFA 2011-Dec-14 03:46:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-14 03:46:36 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2011-Dec-14 03:46:36 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Dec-14 03:46:39 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2011-Dec-14 03:46:39 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2011-Dec-14 03:46:39 LOG4 got_cormsg: From DATATAKING: vw% io 2011-Dec-14 03:46:39 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2011-Dec-14 03:46:39 LOG4 got_cormsg: From DATATAKING: 2011-Dec-14 03:46:39 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2011-Dec-14 03:46:39 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2011-Dec-14 03:46:39 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2011-Dec-14 03:46:39 LOG4 got_cormsg: From DATATAKING: vw% connectall 2011-Dec-14 03:46:39 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2011-Dec-14 03:46:39 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2011-Dec-14 03:46:39 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2011-Dec-14 03:46:39 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2011-Dec-14 03:46:39 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2011-Dec-14 03:46:39 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2011-Dec-14 03:46:39 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2011-Dec-14 03:46:39 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2011-Dec-14 03:46:40 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2011-Dec-14 03:46:40 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2011-Dec-14 03:46:40 LOG4 got_cormsg: From DATATAKING: acvlbical off 2011-Dec-14 03:46:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:46:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:46:46 LOG4 got_cormsg: From DATATAKING: waiting for turret position:26.64 2011-Dec-14 03:47:29 INFO5 CIMA-read_in_command_file: Included command file 'command_galfacurpos_cima31.cmd' (at lines 49 - 65) 2011-Dec-14 03:47:29 INFO4 CIMA-load_command_file: Loaded command file '111214am.cmd' 2011-Dec-14 03:47:31 INFO1 CIMA-run_command_file: Transferring command file '111214am.cmd' to executive ... 2011-Dec-14 03:47:31 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD ages_mock.conf} 2011-Dec-14 03:47:31 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2011-Dec-14 03:47:31 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {CATALOG AGESFull.cat} 2011-Dec-14 03:47:31 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 9 {IF LSTSLEW(AGES3193_p3_135) < 085640 THEN} 2011-Dec-14 03:47:31 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 10 {FIXEDDRIFT az=258.71 alfaangle=-63.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_135 ra=95300.00 dec=203200.00} 2011-Dec-14 03:47:31 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {ENDIF} 2011-Dec-14 03:47:31 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 16 {IF LSTSLEW(AGES3193_p3_137) < 092010 THEN} 2011-Dec-14 03:47:31 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 17 {FIXEDDRIFT az=253.96 alfaangle=-55.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_137 ra=95300.00 dec=202900.00} 2011-Dec-14 03:47:31 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 20 {ENDIF} 2011-Dec-14 03:47:31 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 23 {IF LSTSLEW(AGES3193_p3_139) < 094340 THEN} 2011-Dec-14 03:47:31 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 24 {FIXEDDRIFT az=229.02 alfaangle=-26.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_139 ra=95300.00 dec=202600.00} 2011-Dec-14 03:47:31 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 27 {ENDIF} 2011-Dec-14 03:47:31 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 30 {IF LSTSLEW(AGES3193_p3_141) < 100940 THEN} 2011-Dec-14 03:47:31 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 31 {FIXEDDRIFT az=118.21 alfaangle=78.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_141 ra=95300.00 dec=202300.00} 2011-Dec-14 03:47:31 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 34 {ENDIF} 2011-Dec-14 03:47:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 37 {IF LSTSLEW(AGES3193_p3_143) < 103310 THEN} 2011-Dec-14 03:47:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 38 {FIXEDDRIFT az=103.25 alfaangle=-82.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_143 ra=95300.00 dec=202000.00} 2011-Dec-14 03:47:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 41 {ENDIF} 2011-Dec-14 03:47:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 44 {IF LSTSLEW(AGES3193_p3_145) < 105640 THEN} 2011-Dec-14 03:47:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 45 {FIXEDDRIFT az=99.74 alfaangle=-76.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_145 ra=95300.00 dec=201700.00} 2011-Dec-14 03:47:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 48 {ENDIF} 2011-Dec-14 03:47:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 55 {LOAD togs_cima31.conf} 2011-Dec-14 03:47:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 56 {TRACKCURPOS} 2011-Dec-14 03:47:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 57 {ALFAANGLE 19} 2011-Dec-14 03:47:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 61 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2011-Dec-14 03:47:32 COMMAND CIMA-send_to_exec: Sending command to run command file 2011-Dec-14 03:47:32 LOG4 exec_msg: From OBSERVER: run_command_file 111214am.cmd 1 1 25 2011-Dec-14 03:47:32 LOG4 run_command_file: Calling 'run_command_file 111214am.cmd 1 1 25' 2011-Dec-14 03:47:32 BEGIN begin_task: Starting task 'running command file '111214am.cmd'' 2011-Dec-14 03:47:32 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2011-Dec-14 03:47:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '111214am.cmd' ...} 2011-Dec-14 03:47:32 NOTE run_command_file: Starting execution of command file '111214am.cmd' from line 1 2011-Dec-14 03:47:32 COMMAND run_command_line: EXECUTING command 4: 'LOAD ages_mock.conf' 2011-Dec-14 03:47:32 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2011-Dec-14 03:47:32 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-14 03:47:32 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2011-Dec-14 03:47:32 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock.conf' 2011-Dec-14 03:47:32 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2011-Dec-14 03:47:32 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2011-Dec-14 03:47:32 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2011-Dec-14 03:47:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2011-Dec-14 03:47:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2011-Dec-14 03:47:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2011-Dec-14 03:47:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2011-Dec-14 03:47:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2011-Dec-14 03:47:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2011-Dec-14 03:47:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2011-Dec-14 03:47:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2011-Dec-14 03:47:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2011-Dec-14 03:47:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-14 03:47:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-14 03:47:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-14 03:47:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-14 03:47:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2011-Dec-14 03:47:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2011-Dec-14 03:47:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled1) "1" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled2) "0" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards1) "both" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards2) "both" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode1) "spectra" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode2) "spectra" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg1) "2-pol" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg2) "2-pol" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits1) "32" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits2) "32" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor1) "1" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor2) "1" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset1) "0.0" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset2) "0.0" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags1) "8192" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags2) "8192" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs1) "1000.0" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs2) "1000.0" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad1) "1" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad2) "0" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors1) "13" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors2) "0" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors1) "0" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors2) "0" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors1) "0" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors2) "0" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors1) "0" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors2) "0" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype1) "fits" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype2) "fits" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2011-Dec-14 03:47:36 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-14 03:47:36 BEGIN begin_task: Starting task 'configuring IF/LO path' 2011-Dec-14 03:47:36 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Dec-14 03:47:36 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2011-Dec-14 03:47:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2011-Dec-14 03:47:36 INFO1 config_iflo: Selecting receiver ALFA 2011-Dec-14 03:47:36 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2011-Dec-14 03:47:36 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2011-Dec-14 03:47:36 START begin_task: Starting task 'selecting receiver ALFA' 2011-Dec-14 03:47:36 LOG5 begin_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Dec-14 03:47:36 NOTE select_receiver: Starting to select receiver ALFA 2011-Dec-14 03:47:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2011-Dec-14 03:47:36 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2011-Dec-14 03:47:36 LOG3 vw_send: To DATATAKING: acvlbical off 2011-Dec-14 03:47:36 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2011-Dec-14 03:47:36 STOP finish_task: Finishing task 'selecting receiver ALFA' 2011-Dec-14 03:47:36 LOG5 finish_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Dec-14 03:47:36 INFO2 finish_task: DONE finished selecting: receiver ALFA 2011-Dec-14 03:47:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 03:47:36 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2011-Dec-14 03:47:36 LOG5 end_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Dec-14 03:47:36 START begin_task: Starting task 'waiting for receiver ALFA' 2011-Dec-14 03:47:36 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2011-Dec-14 03:47:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 39.3 BITMAP stat_alfa_rot INFO {Waiting on rotating floor} 2011-Dec-14 03:47:36 START begin_task: Starting task 'waiting on waiting for receiver rotation' 2011-Dec-14 03:47:36 LOG5 begin_task: Level: (4) ID = <10006> Status = 0 0 0 0 ok 2011-Dec-14 03:47:36 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2011-Dec-14 03:47:36 LOG4 got_cormsg: From DATATAKING: acvlbical off 2011-Dec-14 03:48:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:48:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:48:11 STOP end_task: Finishing task 'waiting on waiting for receiver rotation' with status 'OK' 2011-Dec-14 03:48:11 LOG5 end_task: Level: (4) ID = <10006> Status = 0 0 0 0 ok 2011-Dec-14 03:48:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT 2011-Dec-14 03:48:11 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2011-Dec-14 03:48:11 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2011-Dec-14 03:48:11 INFO1 config_iflo: Configuring rest of the IF/LO path 2011-Dec-14 03:48:11 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2011-Dec-14 03:48:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-14 03:48:11 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-14 03:48:11 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-14 03:48:11 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2011-Dec-14 03:48:12 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-14 03:48:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-14 03:48:12 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2011-Dec-14 03:48:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-14 03:48:12 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-14 03:48:12 LOG3 vw_send: To DATATAKING: alfafb 1 2011-Dec-14 03:48:12 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2011-Dec-14 03:48:12 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2011-Dec-14 03:48:12 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2011-Dec-14 03:48:12 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2011-Dec-14 03:48:12 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2011-Dec-14 03:48:12 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2011-Dec-14 03:48:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2011-Dec-14 03:48:12 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2011-Dec-14 03:48:12 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2011-Dec-14 03:48:12 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2011-Dec-14 03:48:12 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2011-Dec-14 03:48:12 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2011-Dec-14 03:48:12 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2011-Dec-14 03:48:12 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2011-Dec-14 03:48:12 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2011-Dec-14 03:48:12 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2011-Dec-14 03:48:12 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2011-Dec-14 03:48:12 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2011-Dec-14 03:48:12 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2011-Dec-14 03:48:12 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2011-Dec-14 03:48:12 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2011-Dec-14 03:48:12 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2011-Dec-14 03:48:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 03:48:12 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2011-Dec-14 03:48:12 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2011-Dec-14 03:48:12 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2011-Dec-14 03:48:12 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2011-Dec-14 03:48:12 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2011-Dec-14 03:48:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2011-Dec-14 03:48:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 03:48:12 START begin_task: Starting task 'waiting on configuring IF/LO path' 2011-Dec-14 03:48:12 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2011-Dec-14 03:48:12 LOG4 got_cormsg: From DATATAKING: alfafb 1 2011-Dec-14 03:48:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2011-Dec-14 03:48:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2011-Dec-14 03:48:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2011-Dec-14 03:48:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2011-Dec-14 03:48:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2011-Dec-14 03:48:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2011-Dec-14 03:48:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2011-Dec-14 03:48:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2011-Dec-14 03:48:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2011-Dec-14 03:48:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2011-Dec-14 03:48:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2011-Dec-14 03:48:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2011-Dec-14 03:48:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2011-Dec-14 03:48:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2011-Dec-14 03:48:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 03:48:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2011-Dec-14 03:48:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2011-Dec-14 03:48:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2011-Dec-14 03:48:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2011-Dec-14 03:48:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 03:48:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:48:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:48:17 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:48:17 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:48:17 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:48:18 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:48:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:48:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:48:23 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:48:23 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:48:23 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:48:24 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:48:24 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:48:24 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:48:24 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:48:24 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:48:25 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:48:25 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:48:25 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:48:25 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:48:25 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:48:25 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:48:25 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-14 03:48:25 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2011-Dec-14 03:48:25 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2011-Dec-14 03:48:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2011-Dec-14 03:48:25 STOP finish_task: Finishing task 'configuring IF/LO path' 2011-Dec-14 03:48:25 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Dec-14 03:48:25 DONE finish_task: DONE finished configuration: IF/LO path 2011-Dec-14 03:48:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-14 03:48:26 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2011-Dec-14 03:48:26 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Dec-14 03:48:26 BEGIN begin_task: Starting task 'configuring WAPPs' 2011-Dec-14 03:48:26 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2011-Dec-14 03:48:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2011-Dec-14 03:48:26 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2011-Dec-14 03:48:26 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Dec-14 03:48:26 START begin_task: Starting task 'selecting calibration port' 2011-Dec-14 03:48:26 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2011-Dec-14 03:48:26 LOG3 vw_send: To DATATAKING: calport 3 2011-Dec-14 03:48:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Dec-14 03:48:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 03:48:26 START begin_task: Starting task 'waiting on calport' 2011-Dec-14 03:48:26 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2011-Dec-14 03:48:26 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:48:26 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Dec-14 03:48:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 03:48:26 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:48:26 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-14 03:48:26 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Dec-14 03:48:26 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2011-Dec-14 03:48:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Dec-14 03:48:26 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Dec-14 03:48:26 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2011-Dec-14 03:48:26 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-14 03:48:26 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-14 03:48:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-14 03:48:26 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2011-Dec-14 03:48:26 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-14 03:48:26 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:48:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-14 03:48:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-14 03:48:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-14 03:48:26 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2011-Dec-14 03:48:26 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2011-Dec-14 03:48:26 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2011-Dec-14 03:48:26 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2011-Dec-14 03:48:26 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2011-Dec-14 03:48:26 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2011-Dec-14 03:48:26 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2011-Dec-14 03:48:26 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2011-Dec-14 03:48:26 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2011-Dec-14 03:48:26 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 03:48:26 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 03:48:26 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 03:48:26 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 03:48:26 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Dec-14 03:48:26 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Dec-14 03:48:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-14 03:48:26 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2011-Dec-14 03:48:27 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-14 03:48:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-14 03:48:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-14 03:48:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-14 03:48:27 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2011-Dec-14 03:48:27 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 03:48:27 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 03:48:27 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 03:48:27 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 03:48:27 STOP finish_task: Finishing task 'configuring WAPPs' 2011-Dec-14 03:48:27 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2011-Dec-14 03:48:27 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2011-Dec-14 03:48:27 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-14 03:48:27 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2011-Dec-14 03:48:27 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2011-Dec-14 03:48:27 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2011-Dec-14 03:48:27 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2011-Dec-14 03:48:27 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2011-Dec-14 03:48:27 INFO1 config_mock: Starting to configure the Mock spectrometer 2011-Dec-14 03:48:27 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Dec-14 03:48:27 START begin_task: Starting task 'selecting calibration port' 2011-Dec-14 03:48:27 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2011-Dec-14 03:48:27 LOG3 vw_send: To DATATAKING: calport 3 2011-Dec-14 03:48:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Dec-14 03:48:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 03:48:27 START begin_task: Starting task 'waiting on calport' 2011-Dec-14 03:48:27 LOG5 begin_task: Level: (4) ID = <10016> Status = 0 0 0 0 ok 2011-Dec-14 03:48:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Ellioty Gonzalez' 2011-Dec-14 03:48:27 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Dec-14 03:48:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2011-Dec-14 03:48:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2011-Dec-14 03:48:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 03:48:27 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:48:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Ellioty Gonzalez' 2011-Dec-14 03:48:27 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-14 03:48:27 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Dec-14 03:48:27 LOG5 end_task: Level: (4) ID = <10016> Status = 0 0 0 0 ok 2011-Dec-14 03:48:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Dec-14 03:48:27 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Dec-14 03:48:27 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2011-Dec-14 03:48:27 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-14 03:48:27 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-14 03:48:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-14 03:48:27 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2011-Dec-14 03:48:27 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-14 03:48:27 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:48:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-14 03:48:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-14 03:48:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-14 03:48:27 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2011-Dec-14 03:48:27 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Dec-14 03:48:27 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Dec-14 03:48:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-14 03:48:27 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2011-Dec-14 03:48:27 NOTE WAPPDATA-new_file: New FITS file: wapp.20111214.a2048.0000.fits 2011-Dec-14 03:48:27 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20111214.a2048.0000.fits} 2011-Dec-14 03:48:28 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-14 03:48:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-14 03:48:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-14 03:48:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-14 03:48:28 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2011-Dec-14 03:48:28 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2011-Dec-14 03:48:28 LOG3 socket_wait: To MOCK: NOP 2011-Dec-14 03:48:28 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2011-Dec-14 03:48:28 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2011-Dec-14 03:48:28 ALERT got_mock_message: Mock spectrometer restarting 2011-Dec-14 03:48:28 LOG4 from_mock: From MOCK: nop ok 2011-Dec-14 03:48:28 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2011-Dec-14 03:48:28 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2011-Dec-14 03:48:28 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2011-Dec-14 03:48:28 LOG2 config_mock: Mock spectrometer configuration group 1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2011-Dec-14 03:48:28 LOG2 config_mock: Mock spectrometer configuration group 1 (0): datatype=AB 2011-Dec-14 03:48:28 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bits=32 2011-Dec-14 03:48:28 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bwmhz=172.032 2011-Dec-14 03:48:28 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevif1hz=250000000 2011-Dec-14 03:48:28 LOG2 config_mock: Mock spectrometer configuration group 1 (0): digfreqoffhz=0.0 2011-Dec-14 03:48:28 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fftlen=8192 2011-Dec-14 03:48:28 LOG2 config_mock: Mock spectrometer configuration group 1 (0): dumptmsec=1.0 2011-Dec-14 03:48:28 LOG2 config_mock: Mock spectrometer configuration group 1 (0): blankatod=1 2011-Dec-14 03:48:28 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskadc=13 2011-Dec-14 03:48:28 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskpfb=0 2011-Dec-14 03:48:28 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskacc=0 2011-Dec-14 03:48:28 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskash=0 2011-Dec-14 03:48:28 LOG2 config_mock: Mock spectrometer configuration group 1 (0): adcclkhz=172032000 2011-Dec-14 03:48:28 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevlohz=175000000 325000000 2011-Dec-14 03:48:28 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fileprefix=a2048 2011-Dec-14 03:48:28 LOG2 config_mock: Mock spectrometer configuration group 1 (0): maxfilesizemb=2048 2011-Dec-14 03:48:28 LOG2 config_mock: Mock spectrometer configuration group 1 (0): calctl=c0 2011-Dec-14 03:48:28 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group 1' using string 'conf' 2011-Dec-14 03:48:28 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bits=32:bwmhz=172.032:pdevif1hz=250000000:digfreqoffhz=0.0:fftlen=8192:dumptmsec=1.0:blankatod=1:emaskadc=13:emaskpfb=0:emaskacc=0:emaskash=0:adcclkhz=172032000:pdevlohz=175000000 325000000:fileprefix=a2048:maxfilesizemb=2048:calctl=c0 2011-Dec-14 03:48:28 START begin_task: Starting task 'waiting on configure Mock spectrometer group 1' 2011-Dec-14 03:48:28 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2011-Dec-14 03:48:28 LOG4 from_mock: From MOCK: confok 2011-Dec-14 03:48:28 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group 1' with status 'OK' 2011-Dec-14 03:48:28 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2011-Dec-14 03:48:28 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group 1' 2011-Dec-14 03:48:28 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group 2' using string 'conf' 2011-Dec-14 03:48:28 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2011-Dec-14 03:48:28 START begin_task: Starting task 'waiting on disable Mock spectrometer group 2' 2011-Dec-14 03:48:28 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2011-Dec-14 03:48:28 LOG4 from_mock: From MOCK: confok 2011-Dec-14 03:48:28 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group 2' with status 'OK' 2011-Dec-14 03:48:28 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2011-Dec-14 03:48:29 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group 2' 2011-Dec-14 03:48:29 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2011-Dec-14 03:48:29 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2011-Dec-14 03:48:29 DONE finish_task: DONE finished configuring: the Mock spectrometer 2011-Dec-14 03:48:29 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-14 03:48:29 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2011-Dec-14 03:48:29 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2011-Dec-14 03:48:29 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2011-Dec-14 03:48:29 COMMAND run_command_line: EXECUTING command 5: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2011-Dec-14 03:48:29 COMMAND run_command_line: EXECUTING command 6: 'CATALOG AGESFull.cat' 2011-Dec-14 03:48:29 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2011-Dec-14 03:48:29 COMMAND run_command_line: EXECUTING command 9: 'IF LSTSLEW(AGES3193_p3_135) < 085640 THEN' 2011-Dec-14 03:48:29 LOG3 is_if_valid: Current source data: up 259.2 14.7 UP - - 144 1.5 2011-Dec-14 03:48:29 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_135) < 085640 2011-Dec-14 03:48:29 INFO5 is_if_valid: Condition parsed as: 8.8917619999999999 < 8.9444444444444446 2011-Dec-14 03:48:29 COMMAND run_command_line: EXECUTING command 10: 'FIXEDDRIFT az=258.71 alfaangle=-63.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_135 ra=95300.00 dec=203200.00' 2011-Dec-14 03:48:29 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-14 03:48:30 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-14 03:48:30 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 258.71 -63.2 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_135 95300.00 203200.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-14 03:48:30 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-14 03:48:30 LOG5 begin_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2011-Dec-14 03:48:30 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'J0348+0432' 2011-Dec-14 03:48:30 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-14 03:48:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_135} 2011-Dec-14 03:48:30 INFO3 fixed_driftmap: Sending telescope to Az = 258.71 and ZA = 13.61 2011-Dec-14 03:48:30 LOG3 track_source: Calling 'track_source AGES3193_p3_135 258.71 13.6108368847 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-14 03:48:30 START begin_task: Starting task 'sending tracking commands' 2011-Dec-14 03:48:30 LOG5 begin_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2011-Dec-14 03:48:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_135} INFO {Slewing to source 'AGES3193_p3_135' ...} 2011-Dec-14 03:48:30 INFO1 track_source: Starting to track AGES3193_p3_135 2011-Dec-14 03:48:30 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_135" 2011-Dec-14 03:48:30 LOG3 vw_send: To DATATAKING: set ra 258.71 2011-Dec-14 03:48:30 LOG3 vw_send: To DATATAKING: set dec 13.6108368847 2011-Dec-14 03:48:30 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-14 03:48:30 LOG3 vw_send: To DATATAKING: pnt tr 258.71 13.6108368847 -CF 2011-Dec-14 03:48:30 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 03:48:30 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-14 03:48:30 LOG5 finish_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2011-Dec-14 03:48:30 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-14 03:48:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 03:48:30 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-14 03:48:30 LOG5 end_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2011-Dec-14 03:48:30 START begin_task: Starting task 'rotate ALFA to -63.2 degrees' 2011-Dec-14 03:48:30 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2011-Dec-14 03:48:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -63.2 degrees ...} 2011-Dec-14 03:48:30 INFO2 rotate_alfa: ALFA commanded to -63.2 degrees 2011-Dec-14 03:48:30 LOG3 sock_errsend: To ALFAMOTOR: POSITION -63.2 REPLY 2011-Dec-14 03:48:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-14 03:48:30 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-14 03:48:30 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2011-Dec-14 03:48:30 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_135" 2011-Dec-14 03:48:30 LOG4 got_cormsg: From DATATAKING: set ra 258.71 2011-Dec-14 03:48:30 LOG4 got_cormsg: From DATATAKING: set dec 13.6108368847 2011-Dec-14 03:48:30 LOG4 got_cormsg: From DATATAKING: vw% 258.71 2011-Dec-14 03:48:30 LOG4 got_cormsg: From DATATAKING: vw% 13.6108368847 2011-Dec-14 03:48:30 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:48:30 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-14 03:48:30 LOG4 got_cormsg: From DATATAKING: pnt tr 258.71 13.6108368847 -CF 2011-Dec-14 03:48:30 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 03:48:30 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-14 03:48:30 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:49:17 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-14 03:49:17 INFO3 alfa_motor: ALFA rotator in-position -63.20 degrees 2011-Dec-14 03:49:17 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-14 03:49:17 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2011-Dec-14 03:49:17 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-14 03:49:17 STOP finish_task: Finishing task 'rotate ALFA to -63.2 degrees' 2011-Dec-14 03:49:17 LOG5 finish_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2011-Dec-14 03:49:17 INFO2 finish_task: DONE finished configuration: rotating ALFA to -63.2 degrees 2011-Dec-14 03:49:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 03:49:17 STOP end_task: Finishing task 'rotate ALFA to -63.2 degrees' with status 'OK' 2011-Dec-14 03:49:17 LOG5 end_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2011-Dec-14 03:49:17 START begin_task: Starting task 'waiting on telescope' 2011-Dec-14 03:49:17 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2011-Dec-14 03:49:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-14 03:49:17 LOG3 waittrk: Start waittrk 5 2011-Dec-14 03:49:17 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-14 03:49:17 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2011-Dec-14 03:49:22 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-14 03:49:22 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2011-Dec-14 03:49:22 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-14 03:49:22 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2011-Dec-14 03:49:50 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-14 03:49:50 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2011-Dec-14 03:49:50 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-14 03:49:50 INFO2 waittrk: Now tracking AGES3193_p3_135 2011-Dec-14 03:49:50 LOG4 waittrk: Current telescope position: Az = 258.27 ZA = 13.62 2011-Dec-14 03:49:50 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-14 03:49:50 LOG5 finish_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2011-Dec-14 03:49:50 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-14 03:49:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 03:49:50 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-14 03:49:50 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2011-Dec-14 03:49:50 START begin_task: Starting task 'selecting calibration type' 2011-Dec-14 03:49:50 LOG5 begin_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2011-Dec-14 03:49:50 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-14 03:49:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-14 03:49:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 03:49:50 START begin_task: Starting task 'waiting on setcal' 2011-Dec-14 03:49:50 LOG5 begin_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2011-Dec-14 03:49:51 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-14 03:49:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 03:49:51 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:49:51 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-14 03:49:51 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-14 03:49:51 LOG5 end_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2011-Dec-14 03:49:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-14 03:49:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-14 03:49:51 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-14 03:49:51 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-14 03:49:51 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2011-Dec-14 03:49:51 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-14 03:49:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-14 03:49:51 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2011-Dec-14 03:49:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-14 03:49:51 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-14 03:49:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-14 03:49:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-14 03:49:51 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-14 03:49:51 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2011-Dec-14 03:49:51 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:49:51 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-14 03:49:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-14 03:49:51 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2011-Dec-14 03:49:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-14 03:49:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-14 03:49:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-14 03:49:51 LOG5 end_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2011-Dec-14 03:49:51 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Dec-14 03:49:51 INFO2 astwait: Waiting for 135 seconds from 07:49:51 to 07:52:06 UTC ... 2011-Dec-14 03:49:51 LOG4 send_obs_status: To obs_status: <1> TASKTIME 135 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-14 03:49:51 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Dec-14 03:49:51 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2011-Dec-14 03:52:06 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Dec-14 03:52:06 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2011-Dec-14 03:52:06 INFO3 astwait: Finished waiting 2011-Dec-14 03:52:06 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-14 03:52:06 LOG5 dopset_later: Calling 'dopset_later 60.924039086316' 2011-Dec-14 03:52:06 INFO3 dopset_later: Setting Doppler correction for 03:53:06 (60.9 seconds from now) 2011-Dec-14 03:52:06 LOG5 antvel: Calling 'antvel 258.710000 13.610837 F Heliocentric 60.924039086316' 2011-Dec-14 03:52:06 LOG2 antvel: Transforming current Az = 258.71 ZA = 13.61 to apparent RA = 09:53:41.4 Dec = +20:28:23.3 2011-Dec-14 03:52:06 LOG2 antvel: Parameters to Doppler: Heliocentric 28386 2011 348 0.0 2011-Dec-14 03:52:06 INFO5 antvel: Computed antenna velocity: -26.41296 km/s 2011-Dec-14 03:52:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-26.412963066100001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-14 03:52:06 INFO4 dopset_gen: New sky frequencies: 1381.365133 1381.365133 1381.365133 1381.365133 1381.365133 1381.365133 1381.365133 1381.365133 1381.365133 2011-Dec-14 03:52:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.365133 sky0=1381.365133 sky1=1381.365133 sky2=1381.365133 sky3=1381.365133 sky4=1381.365133 sky5=1381.365133 sky6=1381.365133 sky7=1381.365133 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-14 03:52:06 LOG2 dopset_gen: Result from 'sky2syn': 1631.365133 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-14 03:52:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631365133.0} 2011-Dec-14 03:52:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 03:52:06 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-14 03:52:06 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-14 03:52:06 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.6 Dec = +20:31:46.7 2011-Dec-14 03:52:06 LOG3 track_source: Calling 'track_source AGES3193_p3_135 095203.6 203146.7 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-14 03:52:06 START begin_task: Starting task 'sending tracking commands' 2011-Dec-14 03:52:06 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2011-Dec-14 03:52:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_135} INFO {Slewing to source 'AGES3193_p3_135' ...} 2011-Dec-14 03:52:06 INFO1 track_source: Starting to track AGES3193_p3_135 2011-Dec-14 03:52:06 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_135" 2011-Dec-14 03:52:06 LOG3 vw_send: To DATATAKING: set ra 095203.6 2011-Dec-14 03:52:06 LOG3 vw_send: To DATATAKING: set dec 203146.7 2011-Dec-14 03:52:06 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-14 03:52:06 LOG3 vw_send: To DATATAKING: pnt tr 095203.6 203146.7 -CJ 2011-Dec-14 03:52:06 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 03:52:06 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-14 03:52:06 LOG5 finish_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2011-Dec-14 03:52:06 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-14 03:52:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 03:52:06 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-14 03:52:06 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2011-Dec-14 03:52:06 START begin_task: Starting task 'waiting on telescope' 2011-Dec-14 03:52:06 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2011-Dec-14 03:52:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-14 03:52:06 LOG3 waittrk: Start waittrk 5 2011-Dec-14 03:52:06 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-14 03:52:06 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2011-Dec-14 03:52:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631365133.0} 2011-Dec-14 03:52:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 03:52:06 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:52:06 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_135" 2011-Dec-14 03:52:06 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-14 03:52:06 LOG4 got_cormsg: From DATATAKING: set ra 095203.6 2011-Dec-14 03:52:06 LOG4 got_cormsg: From DATATAKING: set dec 203146.7 2011-Dec-14 03:52:06 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-14 03:52:06 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.6 203146.7 -CJ 2011-Dec-14 03:52:06 LOG4 got_cormsg: From DATATAKING: 095203.6 2011-Dec-14 03:52:06 LOG4 got_cormsg: From DATATAKING: vw% 203146.7 2011-Dec-14 03:52:06 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2011-Dec-14 03:52:06 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 03:52:06 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:52:11 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-14 03:52:11 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2011-Dec-14 03:52:11 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-14 03:52:11 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2011-Dec-14 03:52:13 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-14 03:52:13 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2011-Dec-14 03:52:13 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-14 03:52:13 INFO2 waittrk: Now tracking AGES3193_p3_135 2011-Dec-14 03:52:13 LOG4 waittrk: Current telescope position: Az = 258.27 ZA = 13.60 2011-Dec-14 03:52:13 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-14 03:52:13 LOG5 finish_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2011-Dec-14 03:52:13 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-14 03:52:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 03:52:13 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-14 03:52:13 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2011-Dec-14 03:52:13 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-14 03:52:13 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2011-Dec-14 03:52:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-14 03:52:13 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-14 03:52:13 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-14 03:52:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-14 03:52:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 03:52:13 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-14 03:52:13 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2011-Dec-14 03:52:14 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-14 03:52:14 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 03:52:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:52:17 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-14 03:52:17 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-14 03:52:17 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2011-Dec-14 03:52:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-14 03:52:17 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-14 03:52:17 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2011-Dec-14 03:52:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-14 03:52:17 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-14 03:52:17 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-14 03:52:17 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-14 03:52:17 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-14 03:52:17 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-14 03:52:17 LOG5 begin_task: Level: (5) ID = <10041> Status = 0 0 0 0 ok 2011-Dec-14 03:52:17 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:52:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-14 03:52:17 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 8 5 dB 2011-Dec-14 03:52:17 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 3 dB 2011-Dec-14 03:52:17 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 4 dB --- beam 3: 2 2 dB 2011-Dec-14 03:52:17 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2011-Dec-14 03:52:17 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-14 03:52:17 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-14 03:52:17 LOG5 end_task: Level: (5) ID = <10041> Status = 0 0 0 0 ok 2011-Dec-14 03:52:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.094 0.985 ALFA beam 1: 0.894 1.120 2011-Dec-14 03:52:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.078 0.925 ALFA beam 3: 1.000 1.077 2011-Dec-14 03:52:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.767 1.035 ALFA beam 5: 0.923 1.094 2011-Dec-14 03:52:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.078 0.014 ALFA beam 7: 0.956 0.014 2011-Dec-14 03:52:17 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-14 03:52:17 LOG5 finish_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2011-Dec-14 03:52:17 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-14 03:52:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 03:52:17 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-14 03:52:17 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2011-Dec-14 03:52:17 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-14 03:52:17 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2011-Dec-14 03:52:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-14 03:52:17 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-14 03:52:17 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-14 03:52:17 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-14 03:52:17 LOG5 begin_task: Level: (5) ID = <10043> Status = 0 0 0 0 ok 2011-Dec-14 03:52:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-14 03:52:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.094 0.985 0.894 1.120 2011-Dec-14 03:52:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 0.925 1.000 1.077 2011-Dec-14 03:52:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.767 1.035 0.923 1.094 2011-Dec-14 03:52:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.014 0.956 0.014 2011-Dec-14 03:52:23 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.7 27.9 B 29.4 29.5 mn:A 0.1 0.1 B -0.2 -0.3 gn: 11 11 2011-Dec-14 03:52:23 INFO3 from_mock: From MOCK: b0s1g0 rms:A 32.1 30.7 B 27.3 28.9 mn:A 0.2 -0.4 B -0.5 0.1 gn: 12 11 2011-Dec-14 03:52:23 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.5 28.6 B 32.3 28.3 mn:A 0.7 0.6 B 0.2 -0.1 gn: 7 11 2011-Dec-14 03:52:23 INFO3 from_mock: From MOCK: b1s1g0 rms:A 29.9 27.6 B 30.7 30.7 mn:A -0.2 -0.2 B 0.6 0.1 gn: 8 10 2011-Dec-14 03:52:23 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.5 30.6 B 31.1 32.5 mn:A -0.1 -0.4 B 0.3 -0.0 gn: 11 12 2011-Dec-14 03:52:23 INFO3 from_mock: From MOCK: b2s1g0 rms:A 28.8 29.1 B 32.0 29.7 mn:A 0.3 -0.3 B 0.2 0.3 gn: 11 12 2011-Dec-14 03:52:23 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.7 31.5 B 30.6 27.2 mn:A 0.3 -0.3 B 0.1 -0.3 gn: 13 12 2011-Dec-14 03:52:23 INFO3 from_mock: From MOCK: b3s1g0 rms:A 29.6 28.9 B 29.1 30.3 mn:A -0.4 0.3 B 0.1 0.2 gn: 12 12 2011-Dec-14 03:52:23 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.5 28.6 B 31.0 31.1 mn:A -0.2 -0.3 B -0.4 0.0 gn: 13 12 2011-Dec-14 03:52:23 INFO3 from_mock: From MOCK: b4s1g0 rms:A 31.5 28.5 B 29.8 28.7 mn:A -0.1 -0.1 B -0.4 0.1 gn: 16 13 2011-Dec-14 03:52:23 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.1 28.1 B 30.7 30.6 mn:A 0.4 0.4 B -0.0 0.4 gn: 12 11 2011-Dec-14 03:52:23 INFO3 from_mock: From MOCK: b5s1g0 rms:A 29.3 29.1 B 30.9 30.6 mn:A -0.5 0.3 B -0.0 0.2 gn: 12 11 2011-Dec-14 03:52:23 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.8 30.1 B 14.1 14.5 mn:A -0.5 0.2 B 0.3 -0.5 gn: 13 31 2011-Dec-14 03:52:23 INFO3 from_mock: From MOCK: b6s1g0 rms:A 33.3 30.2 B 11.1 10.8 mn:A 0.6 0.5 B 0.2 0.2 gn: 14 31 2011-Dec-14 03:52:23 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-14 03:52:23 LOG5 end_task: Level: (5) ID = <10043> Status = 0 0 0 0 ok 2011-Dec-14 03:52:23 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-14 03:52:23 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-14 03:52:23 LOG5 finish_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2011-Dec-14 03:52:23 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-14 03:52:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 03:52:23 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-14 03:52:23 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2011-Dec-14 03:52:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-14 03:52:23 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-14 03:52:23 LOG5 finish_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2011-Dec-14 03:52:23 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-14 03:52:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 03:52:23 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-14 03:52:23 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2011-Dec-14 03:52:23 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 03:52:24 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 03:52:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 03:52:24 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 03:52:24 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20111214.a2048.0000.fits' is empty! 2011-Dec-14 03:52:24 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-14 03:52:24 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-14 03:52:24 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2011-Dec-14 03:52:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-14 03:52:24 START begin_task: Starting task 'selecting calibration type' 2011-Dec-14 03:52:24 LOG5 begin_task: Level: (4) ID = <10045> Status = 0 0 0 0 ok 2011-Dec-14 03:52:24 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-14 03:52:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-14 03:52:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 03:52:24 START begin_task: Starting task 'waiting on setcal' 2011-Dec-14 03:52:24 LOG5 begin_task: Level: (5) ID = <10046> Status = 0 0 0 0 ok 2011-Dec-14 03:52:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Ellioty Gonzalez' 2011-Dec-14 03:52:24 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-14 03:52:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 03:52:24 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:52:24 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-14 03:52:24 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-14 03:52:24 LOG5 end_task: Level: (5) ID = <10046> Status = 0 0 0 0 ok 2011-Dec-14 03:52:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-14 03:52:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-14 03:52:24 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-14 03:52:24 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-14 03:52:24 LOG5 begin_task: Level: (5) ID = <10047> Status = 0 0 0 0 ok 2011-Dec-14 03:52:24 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:52:25 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-14 03:52:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-14 03:52:25 LOG5 end_task: Level: (5) ID = <10047> Status = 0 0 0 0 ok 2011-Dec-14 03:52:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-14 03:52:25 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-14 03:52:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-14 03:52:25 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-14 03:52:25 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-14 03:52:25 LOG5 begin_task: Level: (5) ID = <10048> Status = 0 0 0 0 ok 2011-Dec-14 03:52:25 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-14 03:52:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-14 03:52:25 LOG5 end_task: Level: (5) ID = <10048> Status = 0 0 0 0 ok 2011-Dec-14 03:52:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-14 03:52:25 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-14 03:52:25 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-14 03:52:25 LOG5 end_task: Level: (4) ID = <10045> Status = 0 0 0 0 ok 2011-Dec-14 03:52:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-14 03:52:25 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-14 03:52:25 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-14 03:52:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-14 03:52:25 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2011-Dec-14 03:52:25 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-14 03:52:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-14 03:52:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-14 03:52:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-14 03:52:25 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2011-Dec-14 03:52:25 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-14 03:52:25 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-14 03:52:25 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2011-Dec-14 03:52:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-14 03:52:25 LOG5 log_alfabeam: Parameters: 9.8676666666666684 20.52963888888889 8.932776 2011.9532139643065 -63.200085 2011-Dec-14 03:52:25 LOG4 log_alfabeam: ALFABEAM 0 9.867666666666665 20.529638888888901 2011-Dec-14 03:52:25 LOG4 log_alfabeam: ALFABEAM 1 9.868815127767904 20.439597026208414 2011-Dec-14 03:52:25 LOG4 log_alfabeam: ALFABEAM 2 9.874734112324887 20.499357570110156 2011-Dec-14 03:52:25 LOG4 log_alfabeam: ALFABEAM 3 9.873560608002794 20.589935355107325 2011-Dec-14 03:52:25 LOG4 log_alfabeam: ALFABEAM 4 9.866474806567973 20.619531194688562 2011-Dec-14 03:52:25 LOG4 log_alfabeam: ALFABEAM 5 9.860592417409734 20.559276777540905 2011-Dec-14 03:52:25 LOG4 log_alfabeam: ALFABEAM 6 9.861759207416105 20.469919567764318 2011-Dec-14 03:52:25 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-14 03:52:25 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-14 03:52:25 LOG3 take_mock_data: PSET configuration: obsnm=Ellioty Gonzalez 2011-Dec-14 03:52:25 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_135 2011-Dec-14 03:52:25 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-14 03:52:25 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-14 03:52:25 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-14 03:52:25 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-14 03:52:25 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-14 03:52:25 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-14 03:52:25 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-14 03:52:25 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-14 03:52:25 LOG3 take_mock_data: PSET configuration: patternid=134800001 2011-Dec-14 03:52:25 LOG3 take_mock_data: PSET configuration: scanid=134800001 2011-Dec-14 03:52:25 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-14 03:52:25 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-14 03:52:25 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-14 03:52:25 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456365133.0 2011-Dec-14 03:52:25 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306365133.0 2011-Dec-14 03:52:25 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-14 03:52:25 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-14 03:52:25 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Ellioty Gonzalez:object=AGES3193_p3_135:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=134800001:scanid=134800001:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456365133.0:topobfreqhz=1306365133.0:filetype=1 2011-Dec-14 03:52:25 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-14 03:52:25 LOG5 begin_task: Level: (5) ID = <10051> Status = 0 0 0 0 ok 2011-Dec-14 03:52:25 LOG4 from_mock: From MOCK: psetok 2011-Dec-14 03:52:25 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-14 03:52:25 LOG5 end_task: Level: (5) ID = <10051> Status = 0 0 0 0 ok 2011-Dec-14 03:52:25 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-14 03:52:25 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-14 03:52:25 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-14 03:52:25 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-14 03:52:25 LOG5 begin_task: Level: (5) ID = <10052> Status = 0 0 0 0 ok 2011-Dec-14 03:52:25 LOG4 from_mock: From MOCK: starok 2011-Dec-14 03:52:25 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-14 03:52:25 LOG5 end_task: Level: (5) ID = <10052> Status = 0 0 0 0 ok 2011-Dec-14 03:52:25 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-14 03:52:25 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134800001 2011-Dec-14 03:52:26 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-14 03:52:26 LOG5 begin_task: Level: (5) ID = <10053> Status = 0 0 0 0 ok 2011-Dec-14 03:52:26 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-14 03:52:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 03:52:26 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-14 03:52:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-14 03:52:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28347.00 2011-Dec-14 03:52:28 INFO2 got_mock_message: Mock spectrometer start file number is 00000 2011-Dec-14 03:52:28 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-14 03:52:28 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-14 03:52:28 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-14 03:52:28 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-14 03:52:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-14 03:52:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-14 03:52:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-14 03:52:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-14 03:52:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-14 03:52:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-14 03:52:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-14 03:52:28 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-14 03:52:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 03:52:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 03:52:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 03:52:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 03:52:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 03:52:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 03:52:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 03:52:31 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:52:31.01 2011-Dec-14 03:52:31 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323849151.01 Wed Dec 14 03:52:31 2011 2011-Dec-14 03:52:31 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-14 03:52:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.365133 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 03:52:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.365133 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 03:52:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.365133 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 03:52:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.365133 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 03:52:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.365133 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 03:52:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.365133 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 03:52:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.365133 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 03:52:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.365133 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 03:52:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.365133 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 03:52:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 03:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.525 (still bad) 2011-Dec-14 03:52:37 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-14 03:52:37 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-14 03:52:37 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-14 03:52:37 LOG5 end_task: Level: (5) ID = <10053> Status = 0 0 0 0 ok 2011-Dec-14 03:52:37 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-14 03:52:37 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2011-Dec-14 03:52:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-14 03:52:37 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-14 03:52:37 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-14 03:52:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-14 03:52:37 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2011-Dec-14 03:52:37 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-14 03:52:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-14 03:52:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-14 03:52:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-14 03:52:37 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2011-Dec-14 03:52:37 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-14 03:52:37 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-14 03:52:37 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2011-Dec-14 03:52:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-14 03:52:37 LOG5 log_alfabeam: Parameters: 9.8676666666666684 20.52963888888889 8.935839 2011.9532143128756 -63.200085 2011-Dec-14 03:52:37 LOG4 log_alfabeam: ALFABEAM 0 9.867666666666668 20.529638888888901 2011-Dec-14 03:52:37 LOG4 log_alfabeam: ALFABEAM 1 9.868819155685904 20.439607123700899 2011-Dec-14 03:52:37 LOG4 log_alfabeam: ALFABEAM 2 9.874735483961491 20.499420121787622 2011-Dec-14 03:52:37 LOG4 log_alfabeam: ALFABEAM 3 9.873557831294406 20.589989317925259 2011-Dec-14 03:52:37 LOG4 log_alfabeam: ALFABEAM 4 9.866470642598502 20.619520220164588 2011-Dec-14 03:52:37 LOG4 log_alfabeam: ALFABEAM 5 9.860591064296118 20.559212261379432 2011-Dec-14 03:52:37 LOG4 log_alfabeam: ALFABEAM 6 9.861761897995397 20.469867527928034 2011-Dec-14 03:52:37 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-14 03:52:37 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-14 03:52:37 LOG3 take_mock_data: PSET configuration: obsnm=Ellioty Gonzalez 2011-Dec-14 03:52:37 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_135 2011-Dec-14 03:52:37 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-14 03:52:37 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-14 03:52:37 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-14 03:52:37 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-14 03:52:37 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-14 03:52:37 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-14 03:52:37 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-14 03:52:37 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-14 03:52:37 LOG3 take_mock_data: PSET configuration: patternid=134800001 2011-Dec-14 03:52:37 LOG3 take_mock_data: PSET configuration: scanid=134800002 2011-Dec-14 03:52:37 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-14 03:52:37 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-14 03:52:37 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-14 03:52:37 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456365133.0 2011-Dec-14 03:52:37 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306365133.0 2011-Dec-14 03:52:37 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-14 03:52:37 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-14 03:52:37 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Ellioty Gonzalez:object=AGES3193_p3_135:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=134800001:scanid=134800002:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456365133.0:topobfreqhz=1306365133.0:filetype=1 2011-Dec-14 03:52:37 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-14 03:52:37 LOG5 begin_task: Level: (5) ID = <10056> Status = 0 0 0 0 ok 2011-Dec-14 03:52:37 LOG4 from_mock: From MOCK: psetok 2011-Dec-14 03:52:37 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-14 03:52:37 LOG5 end_task: Level: (5) ID = <10056> Status = 0 0 0 0 ok 2011-Dec-14 03:52:37 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-14 03:52:37 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-14 03:52:37 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-14 03:52:37 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-14 03:52:37 LOG5 begin_task: Level: (5) ID = <10057> Status = 0 0 0 0 ok 2011-Dec-14 03:52:37 LOG4 from_mock: From MOCK: starok 2011-Dec-14 03:52:37 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-14 03:52:37 LOG5 end_task: Level: (5) ID = <10057> Status = 0 0 0 0 ok 2011-Dec-14 03:52:37 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-14 03:52:37 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134800002 2011-Dec-14 03:52:37 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-14 03:52:37 LOG5 begin_task: Level: (5) ID = <10058> Status = 0 0 0 0 ok 2011-Dec-14 03:52:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 03:52:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-14 03:52:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28358.00 2011-Dec-14 03:52:38 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-14 03:52:38 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-14 03:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.533 (still bad) 2011-Dec-14 03:52:40 INFO2 got_mock_message: Mock spectrometer start file number is 00100 2011-Dec-14 03:52:40 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-14 03:52:40 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-14 03:52:40 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-14 03:52:40 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-14 03:52:40 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-14 03:52:40 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-14 03:52:40 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-14 03:52:40 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-14 03:52:40 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-14 03:52:40 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-14 03:52:40 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-14 03:52:40 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-14 03:52:40 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 03:52:40 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 03:52:40 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 03:52:40 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 03:52:40 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 03:52:40 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 03:52:40 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 03:52:43 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:52:43.01 2011-Dec-14 03:52:43 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323849163.01 Wed Dec 14 03:52:43 2011 2011-Dec-14 03:52:43 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-14 03:52:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.365133 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 03:52:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.365133 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 03:52:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.365133 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 03:52:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.365133 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 03:52:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.365133 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 03:52:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.365133 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 03:52:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.365133 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 03:52:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.365133 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 03:52:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.365133 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 03:52:43 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-14 03:52:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 03:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-14 03:52:49 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-14 03:52:49 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-14 03:52:49 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-14 03:52:49 LOG5 end_task: Level: (5) ID = <10058> Status = 0 0 0 0 ok 2011-Dec-14 03:52:49 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-14 03:52:49 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2011-Dec-14 03:52:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-14 03:52:49 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-14 03:52:49 LOG5 finish_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2011-Dec-14 03:52:49 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-14 03:52:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 03:52:49 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-14 03:52:49 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2011-Dec-14 03:52:49 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-14 03:52:49 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 258.71 and ZA = 13.61 2011-Dec-14 03:52:49 LOG3 track_source: Calling 'track_source AGES3193_p3_135 258.71 13.6108368847 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-14 03:52:49 START begin_task: Starting task 'sending tracking commands' 2011-Dec-14 03:52:49 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2011-Dec-14 03:52:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_135} INFO {Slewing to source 'AGES3193_p3_135' ...} 2011-Dec-14 03:52:49 INFO1 track_source: Starting to track AGES3193_p3_135 2011-Dec-14 03:52:49 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_135" 2011-Dec-14 03:52:49 LOG3 vw_send: To DATATAKING: set ra 258.71 2011-Dec-14 03:52:49 LOG3 vw_send: To DATATAKING: set dec 13.6108368847 2011-Dec-14 03:52:49 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-14 03:52:49 LOG3 vw_send: To DATATAKING: pnt tr 258.71 13.6108368847 -CF 2011-Dec-14 03:52:49 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 03:52:49 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-14 03:52:49 LOG5 finish_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2011-Dec-14 03:52:49 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-14 03:52:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 03:52:49 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-14 03:52:49 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2011-Dec-14 03:52:49 LOG1 fixed_driftmap: Parameters: HA = -00:57:02.5 Start = 08:56:39.0 LST = 08:56:21.1 diff = 18.0 secs 2011-Dec-14 03:52:49 INFO2 fixed_driftmap: Waiting 16 seconds for RA 9:53:42 2011-Dec-14 03:52:49 INFO2 lstwait: Waiting for 15.9 secs from LST 08:56:21 to LST 08:56:37 ... 2011-Dec-14 03:52:49 LOG4 send_obs_status: To obs_status: <1> TASKTIME 15.930027089196033 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-14 03:52:49 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-14 03:52:49 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2011-Dec-14 03:52:49 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_135" 2011-Dec-14 03:52:49 LOG4 got_cormsg: From DATATAKING: set ra 258.71 2011-Dec-14 03:52:49 LOG4 got_cormsg: From DATATAKING: set dec 13.6108368847 2011-Dec-14 03:52:49 LOG4 got_cormsg: From DATATAKING: vw% 258.71 2011-Dec-14 03:52:49 LOG4 got_cormsg: From DATATAKING: vw% 13.6108368847 2011-Dec-14 03:52:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 03:52:49 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-14 03:52:49 LOG4 got_cormsg: From DATATAKING: pnt tr 258.71 13.6108368847 -CF 2011-Dec-14 03:52:49 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 03:52:49 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2011-Dec-14 03:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-14 03:53:05 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-14 03:53:05 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2011-Dec-14 03:53:05 LOG4 lstwait: Finished waiting 1.07 seconds late 2011-Dec-14 03:53:05 INFO3 lstwait: Finished waiting 2011-Dec-14 03:53:05 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-14 03:53:05 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-14 03:53:05 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-14 03:53:05 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-14 03:53:05 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-14 03:53:05 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-14 03:53:05 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2011-Dec-14 03:53:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-14 03:53:05 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-14 03:53:05 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-14 03:53:05 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-14 03:53:05 LOG3 take_mock_data: PSET configuration: obsnm=Ellioty Gonzalez 2011-Dec-14 03:53:05 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_135 2011-Dec-14 03:53:05 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-14 03:53:05 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-14 03:53:05 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-14 03:53:05 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-14 03:53:05 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-14 03:53:05 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-14 03:53:05 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-14 03:53:05 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-14 03:53:05 LOG3 take_mock_data: PSET configuration: patternid=134800003 2011-Dec-14 03:53:05 LOG3 take_mock_data: PSET configuration: scanid=134800003 2011-Dec-14 03:53:05 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-14 03:53:05 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-14 03:53:05 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-14 03:53:05 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456365133.0 2011-Dec-14 03:53:05 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306365133.0 2011-Dec-14 03:53:05 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-14 03:53:05 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-14 03:53:05 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Ellioty Gonzalez:object=AGES3193_p3_135:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=134800003:scanid=134800003:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456365133.0:topobfreqhz=1306365133.0:filetype=1 2011-Dec-14 03:53:05 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-14 03:53:05 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2011-Dec-14 03:53:05 LOG4 from_mock: From MOCK: psetok 2011-Dec-14 03:53:05 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-14 03:53:05 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2011-Dec-14 03:53:05 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-14 03:53:05 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-14 03:53:05 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-14 03:53:05 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-14 03:53:05 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2011-Dec-14 03:53:05 LOG4 from_mock: From MOCK: starok 2011-Dec-14 03:53:05 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-14 03:53:05 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2011-Dec-14 03:53:05 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-14 03:53:05 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 134800003 2011-Dec-14 03:53:06 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-14 03:53:06 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2011-Dec-14 03:53:06 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-14 03:53:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 03:53:06 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-14 03:53:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-14 03:53:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28387.00 2011-Dec-14 03:53:08 INFO2 got_mock_message: Mock spectrometer start file number is 00200 2011-Dec-14 03:53:08 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-14 03:53:08 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2011-Dec-14 03:53:08 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-14 03:53:08 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-14 03:53:08 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-14 03:53:08 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-14 03:53:08 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-14 03:53:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.365133 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 03:53:08 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-14 03:53:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.365133 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 03:53:08 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-14 03:53:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.365133 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 03:53:08 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-14 03:53:08 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-14 03:53:08 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-14 03:53:08 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 03:53:08 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 03:53:08 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 03:53:08 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 03:53:08 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 03:53:08 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 03:53:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.365133 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 03:53:08 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 03:53:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.365133 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 03:53:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.365133 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 03:53:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.365133 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 03:53:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.365133 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 03:53:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.365133 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 03:53:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.125 (still bad) 2011-Dec-14 03:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 03:53:11 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:53:11.02 2011-Dec-14 03:53:11 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323849191.02 Wed Dec 14 03:53:11 2011 2011-Dec-14 03:53:11 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-14 03:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 03:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 03:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 03:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 03:53:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-14 03:53:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.114 1.011 0.900 1.124 2011-Dec-14 03:53:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 0.944 1.003 1.079 2011-Dec-14 03:53:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.780 1.057 0.927 1.095 2011-Dec-14 03:53:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.112 0.022 0.968 0.022 2011-Dec-14 03:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 03:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 03:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 03:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-14 03:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-14 03:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 03:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 03:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-14 03:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 03:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-14 03:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-14 03:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 03:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 03:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-14 03:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 03:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 03:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 03:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 03:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 03:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-14 03:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-14 03:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-14 03:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 03:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 03:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 03:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2011-Dec-14 03:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-14 03:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 03:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 03:54:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-14 03:54:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.123 1.020 0.904 1.128 2011-Dec-14 03:54:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 0.945 1.004 1.078 2011-Dec-14 03:54:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.789 1.075 0.931 1.099 2011-Dec-14 03:54:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.099 0.023 0.957 0.023 2011-Dec-14 03:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-14 03:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-14 03:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-14 03:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-14 03:54:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-14 03:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.128 (still bad) 2011-Dec-14 03:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 03:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 03:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 03:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2011-Dec-14 03:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 03:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2011-Dec-14 03:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 03:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-14 03:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 03:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 03:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 03:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2011-Dec-14 03:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 03:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-14 03:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 03:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-14 03:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-14 03:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2011-Dec-14 03:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-14 03:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-14 03:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-14 03:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-14 03:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-14 03:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2011-Dec-14 03:55:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-14 03:55:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.120 1.013 0.898 1.121 2011-Dec-14 03:55:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 0.945 1.003 1.077 2011-Dec-14 03:55:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.780 1.060 0.928 1.095 2011-Dec-14 03:55:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.099 0.022 0.956 0.022 2011-Dec-14 03:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-14 03:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 03:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 03:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-14 03:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.129 (still bad) 2011-Dec-14 03:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-14 03:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-14 03:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 03:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2011-Dec-14 03:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 03:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.131 (still bad) 2011-Dec-14 03:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 03:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 03:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-14 03:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 03:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-14 03:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-14 03:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-14 03:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-14 03:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2011-Dec-14 03:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2011-Dec-14 03:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2011-Dec-14 03:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2011-Dec-14 03:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 03:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 03:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-14 03:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 03:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 03:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 03:56:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-14 03:56:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.117 1.012 0.899 1.121 2011-Dec-14 03:56:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 0.947 1.004 1.078 2011-Dec-14 03:56:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.781 1.058 0.926 1.095 2011-Dec-14 03:56:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 0.022 0.958 0.022 2011-Dec-14 03:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-14 03:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-14 03:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-14 03:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-14 03:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 03:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 03:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 03:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-14 03:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 03:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 03:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 03:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-14 03:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 03:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 03:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 03:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 03:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.126 (still bad) 2011-Dec-14 03:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 03:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 03:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 03:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 03:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 03:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-14 03:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 03:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 03:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 03:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 03:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 03:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2011-Dec-14 03:57:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-14 03:57:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.115 1.009 0.900 1.122 2011-Dec-14 03:57:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 0.946 1.004 1.077 2011-Dec-14 03:57:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.781 1.066 0.925 1.095 2011-Dec-14 03:57:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 0.020 0.957 0.021 2011-Dec-14 03:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-14 03:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 03:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-14 03:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-14 03:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2011-Dec-14 03:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 03:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 03:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 03:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 03:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2011-Dec-14 03:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 03:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 03:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2011-Dec-14 03:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 03:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 03:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2011-Dec-14 03:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 03:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 03:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 03:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 03:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 03:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-14 03:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 03:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 03:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 03:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 03:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 03:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2011-Dec-14 03:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 03:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-14 03:58:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-14 03:58:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.115 1.010 0.903 1.123 2011-Dec-14 03:58:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 0.947 1.006 1.079 2011-Dec-14 03:58:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.780 1.060 0.930 1.096 2011-Dec-14 03:58:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 0.022 0.959 0.022 2011-Dec-14 03:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-14 03:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-14 03:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-14 03:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 03:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-14 03:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-14 03:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 03:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 03:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-14 03:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-14 03:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 03:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-14 03:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 03:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 03:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-14 03:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 03:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 03:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-14 03:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 03:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 03:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 03:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 03:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 03:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 03:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2011-Dec-14 03:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 03:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2011-Dec-14 03:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 03:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-14 03:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 03:59:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-14 03:59:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.116 1.010 0.901 1.120 2011-Dec-14 03:59:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 0.942 1.003 1.076 2011-Dec-14 03:59:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.779 1.061 0.929 1.096 2011-Dec-14 03:59:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 0.021 0.959 0.021 2011-Dec-14 03:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 03:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2011-Dec-14 03:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 03:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 03:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-14 03:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 03:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-14 03:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2011-Dec-14 03:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-14 03:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-14 03:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2011-Dec-14 03:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 03:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 03:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2011-Dec-14 04:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-14 04:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-14 04:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-14 04:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-14 04:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-14 04:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2011-Dec-14 04:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-14 04:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-14 04:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-14 04:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-14 04:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2011-Dec-14 04:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-14 04:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-14 04:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 04:00:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-14 04:00:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.113 1.007 0.900 1.120 2011-Dec-14 04:00:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 0.943 1.004 1.078 2011-Dec-14 04:00:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.778 1.062 0.928 1.096 2011-Dec-14 04:00:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 0.021 0.959 0.020 2011-Dec-14 04:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-14 04:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2011-Dec-14 04:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 04:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 04:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2011-Dec-14 04:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 04:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2011-Dec-14 04:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.133 (still bad) 2011-Dec-14 04:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-14 04:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-14 04:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-14 04:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-14 04:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-14 04:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 04:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 04:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 04:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 04:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 04:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 04:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:01:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-14 04:01:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.112 1.011 0.900 1.123 2011-Dec-14 04:01:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 0.944 1.005 1.078 2011-Dec-14 04:01:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.780 1.061 0.934 1.100 2011-Dec-14 04:01:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.102 0.021 0.959 0.022 2011-Dec-14 04:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-14 04:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-14 04:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2011-Dec-14 04:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2011-Dec-14 04:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2011-Dec-14 04:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2011-Dec-14 04:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2011-Dec-14 04:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2011-Dec-14 04:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2011-Dec-14 04:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2011-Dec-14 04:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2011-Dec-14 04:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2011-Dec-14 04:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2011-Dec-14 04:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-14 04:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-14 04:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2011-Dec-14 04:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-14 04:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2011-Dec-14 04:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:02:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-14 04:02:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.115 1.014 0.901 1.125 2011-Dec-14 04:02:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 0.949 1.008 1.083 2011-Dec-14 04:02:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.782 1.063 0.935 1.103 2011-Dec-14 04:02:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 0.021 0.964 0.022 2011-Dec-14 04:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2011-Dec-14 04:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2011-Dec-14 04:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2011-Dec-14 04:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-14 04:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-14 04:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 04:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-14 04:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-14 04:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2011-Dec-14 04:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 04:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2011-Dec-14 04:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-14 04:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-14 04:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2011-Dec-14 04:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-14 04:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-14 04:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-14 04:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-14 04:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-14 04:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2011-Dec-14 04:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-14 04:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-14 04:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2011-Dec-14 04:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2011-Dec-14 04:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2011-Dec-14 04:03:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2011-Dec-14 04:03:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.123 1.021 0.904 1.129 2011-Dec-14 04:03:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.098 0.954 1.008 1.084 2011-Dec-14 04:03:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.784 1.067 0.936 1.101 2011-Dec-14 04:03:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.111 0.019 0.967 0.020 2011-Dec-14 04:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-14 04:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2011-Dec-14 04:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2011-Dec-14 04:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2011-Dec-14 04:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2011-Dec-14 04:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2011-Dec-14 04:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2011-Dec-14 04:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-14 04:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2011-Dec-14 04:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.151 (still bad) 2011-Dec-14 04:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.160 (still bad) 2011-Dec-14 04:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.162 (still bad) 2011-Dec-14 04:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.156 (still bad) 2011-Dec-14 04:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.141 (still bad) 2011-Dec-14 04:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2011-Dec-14 04:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.131 (still bad) 2011-Dec-14 04:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2011-Dec-14 04:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.131 (still bad) 2011-Dec-14 04:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.136 (still bad) 2011-Dec-14 04:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.138 (still bad) 2011-Dec-14 04:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.142 (still bad) 2011-Dec-14 04:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.141 (still bad) 2011-Dec-14 04:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2011-Dec-14 04:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2011-Dec-14 04:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2011-Dec-14 04:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2011-Dec-14 04:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2011-Dec-14 04:04:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-14 04:04:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.125 1.021 0.904 1.127 2011-Dec-14 04:04:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.093 0.948 1.005 1.080 2011-Dec-14 04:04:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.782 1.063 0.933 1.101 2011-Dec-14 04:04:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.117 0.020 0.972 0.020 2011-Dec-14 04:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2011-Dec-14 04:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.141 (still bad) 2011-Dec-14 04:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.153 (still bad) 2011-Dec-14 04:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.163 (still bad) 2011-Dec-14 04:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.174 (still bad) 2011-Dec-14 04:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.176 (still bad) 2011-Dec-14 04:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.168 (still bad) 2011-Dec-14 04:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.159 (still bad) 2011-Dec-14 04:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.146 (still bad) 2011-Dec-14 04:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2011-Dec-14 04:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2011-Dec-14 04:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2011-Dec-14 04:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2011-Dec-14 04:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2011-Dec-14 04:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2011-Dec-14 04:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2011-Dec-14 04:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2011-Dec-14 04:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2011-Dec-14 04:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2011-Dec-14 04:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2011-Dec-14 04:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2011-Dec-14 04:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2011-Dec-14 04:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2011-Dec-14 04:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2011-Dec-14 04:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-14 04:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-14 04:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2011-Dec-14 04:05:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-14 04:05:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.116 1.012 0.902 1.124 2011-Dec-14 04:05:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.094 0.950 1.005 1.081 2011-Dec-14 04:05:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.781 1.061 0.934 1.103 2011-Dec-14 04:05:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.105 0.020 0.962 0.021 2011-Dec-14 04:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 04:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2011-Dec-14 04:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-14 04:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2011-Dec-14 04:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2011-Dec-14 04:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2011-Dec-14 04:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2011-Dec-14 04:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2011-Dec-14 04:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2011-Dec-14 04:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2011-Dec-14 04:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2011-Dec-14 04:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2011-Dec-14 04:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2011-Dec-14 04:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2011-Dec-14 04:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-14 04:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-14 04:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-14 04:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2011-Dec-14 04:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-14 04:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 04:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.132 (still bad) 2011-Dec-14 04:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-14 04:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-14 04:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2011-Dec-14 04:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-14 04:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-14 04:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2011-Dec-14 04:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-14 04:06:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-14 04:06:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.115 1.010 0.901 1.123 2011-Dec-14 04:06:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.095 0.947 1.004 1.079 2011-Dec-14 04:06:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.779 1.062 0.931 1.099 2011-Dec-14 04:06:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.103 0.020 0.960 0.020 2011-Dec-14 04:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 04:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 04:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2011-Dec-14 04:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-14 04:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-14 04:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-14 04:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-14 04:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2011-Dec-14 04:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-14 04:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-14 04:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-14 04:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-14 04:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2011-Dec-14 04:07:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-14 04:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2011-Dec-14 04:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2011-Dec-14 04:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2011-Dec-14 04:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2011-Dec-14 04:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-14 04:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2011-Dec-14 04:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2011-Dec-14 04:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2011-Dec-14 04:07:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-14 04:07:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.124 1.022 0.899 1.123 2011-Dec-14 04:07:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 0.945 1.006 1.079 2011-Dec-14 04:07:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.780 1.063 0.932 1.101 2011-Dec-14 04:07:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.102 0.020 0.960 0.020 2011-Dec-14 04:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-14 04:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2011-Dec-14 04:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 04:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 04:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2011-Dec-14 04:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2011-Dec-14 04:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2011-Dec-14 04:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 04:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2011-Dec-14 04:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 04:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 04:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2011-Dec-14 04:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2011-Dec-14 04:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2011-Dec-14 04:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2011-Dec-14 04:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2011-Dec-14 04:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2011-Dec-14 04:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2011-Dec-14 04:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2011-Dec-14 04:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 04:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 04:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-14 04:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-14 04:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2011-Dec-14 04:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-14 04:08:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-14 04:08:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.115 1.012 0.900 1.123 2011-Dec-14 04:08:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 0.945 1.004 1.080 2011-Dec-14 04:08:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.781 1.067 0.934 1.101 2011-Dec-14 04:08:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.111 0.020 0.967 0.020 2011-Dec-14 04:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 04:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-14 04:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2011-Dec-14 04:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-14 04:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-14 04:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 04:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2011-Dec-14 04:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 04:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2011-Dec-14 04:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2011-Dec-14 04:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-14 04:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2011-Dec-14 04:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 04:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 04:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 04:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2011-Dec-14 04:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 04:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 04:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 04:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 04:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 04:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-14 04:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 04:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 04:09:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-14 04:09:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.119 1.017 0.901 1.126 2011-Dec-14 04:09:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 0.948 1.005 1.081 2011-Dec-14 04:09:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.780 1.064 0.935 1.103 2011-Dec-14 04:09:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.103 0.020 0.962 0.020 2011-Dec-14 04:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2011-Dec-14 04:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2011-Dec-14 04:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-14 04:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-14 04:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2011-Dec-14 04:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-14 04:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-14 04:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-14 04:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-14 04:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2011-Dec-14 04:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-14 04:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-14 04:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2011-Dec-14 04:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2011-Dec-14 04:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 04:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.126 (still bad) 2011-Dec-14 04:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-14 04:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 04:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.126 (still bad) 2011-Dec-14 04:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2011-Dec-14 04:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2011-Dec-14 04:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2011-Dec-14 04:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2011-Dec-14 04:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2011-Dec-14 04:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2011-Dec-14 04:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2011-Dec-14 04:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2011-Dec-14 04:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2011-Dec-14 04:10:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-14 04:10:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.119 1.018 0.902 1.127 2011-Dec-14 04:10:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.090 0.950 1.008 1.083 2011-Dec-14 04:10:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.782 1.065 0.935 1.102 2011-Dec-14 04:10:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.103 0.021 0.960 0.020 2011-Dec-14 04:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2011-Dec-14 04:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2011-Dec-14 04:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2011-Dec-14 04:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2011-Dec-14 04:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2011-Dec-14 04:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2011-Dec-14 04:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2011-Dec-14 04:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2011-Dec-14 04:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2011-Dec-14 04:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 04:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2011-Dec-14 04:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 04:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 04:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2011-Dec-14 04:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2011-Dec-14 04:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2011-Dec-14 04:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2011-Dec-14 04:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2011-Dec-14 04:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2011-Dec-14 04:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2011-Dec-14 04:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2011-Dec-14 04:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2011-Dec-14 04:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2011-Dec-14 04:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2011-Dec-14 04:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2011-Dec-14 04:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2011-Dec-14 04:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2011-Dec-14 04:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2011-Dec-14 04:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2011-Dec-14 04:11:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2011-Dec-14 04:11:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.116 1.015 0.902 1.126 2011-Dec-14 04:11:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.098 0.954 1.005 1.081 2011-Dec-14 04:11:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.781 1.066 0.933 1.101 2011-Dec-14 04:11:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 0.021 0.957 0.019 2011-Dec-14 04:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2011-Dec-14 04:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2011-Dec-14 04:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2011-Dec-14 04:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2011-Dec-14 04:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2011-Dec-14 04:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2011-Dec-14 04:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2011-Dec-14 04:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.141 (still bad) 2011-Dec-14 04:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2011-Dec-14 04:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2011-Dec-14 04:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2011-Dec-14 04:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2011-Dec-14 04:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2011-Dec-14 04:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.134 (still bad) 2011-Dec-14 04:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2011-Dec-14 04:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2011-Dec-14 04:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.129 (still bad) 2011-Dec-14 04:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2011-Dec-14 04:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2011-Dec-14 04:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.133 (still bad) 2011-Dec-14 04:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-14 04:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 04:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-14 04:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-14 04:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-14 04:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.131 (still bad) 2011-Dec-14 04:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-14 04:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-14 04:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-14 04:12:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-14 04:12:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.115 1.014 0.900 1.124 2011-Dec-14 04:12:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.090 0.947 1.006 1.082 2011-Dec-14 04:12:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.780 1.064 0.934 1.103 2011-Dec-14 04:12:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.102 0.022 0.960 0.022 2011-Dec-14 04:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-14 04:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2011-Dec-14 04:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-14 04:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2011-Dec-14 04:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 04:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-14 04:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.132 (still bad) 2011-Dec-14 04:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-14 04:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-14 04:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2011-Dec-14 04:13:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 04:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2011-Dec-14 04:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2011-Dec-14 04:13:12 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-14 04:13:12 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-14 04:13:12 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-14 04:13:12 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2011-Dec-14 04:13:12 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-14 04:13:12 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2011-Dec-14 04:13:12 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-14 04:13:12 LOG5 finish_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2011-Dec-14 04:13:12 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-14 04:13:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-14 04:13:12 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-14 04:13:12 LOG5 end_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2011-Dec-14 04:13:12 COMMAND run_command_line: EXECUTING command 13: 'ENDIF' 2011-Dec-14 04:13:12 COMMAND run_command_line: EXECUTING command 16: 'IF LSTSLEW(AGES3193_p3_137) < 092010 THEN' 2011-Dec-14 04:13:12 LOG3 is_if_valid: Current source data: up 255.1 8.9 UP - - 120 1.9 2011-Dec-14 04:13:12 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_137) < 092010 2011-Dec-14 04:13:12 INFO5 is_if_valid: Condition parsed as: 9.3115006666666655 < 9.3361111111111121 2011-Dec-14 04:13:12 COMMAND run_command_line: EXECUTING command 17: 'FIXEDDRIFT az=253.96 alfaangle=-55.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_137 ra=95300.00 dec=202900.00' 2011-Dec-14 04:13:12 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-14 04:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2011-Dec-14 04:13:13 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-14 04:13:13 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 253.96 -55.5 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_137 95300.00 202900.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-14 04:13:13 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-14 04:13:13 LOG5 begin_task: Level: (2) ID = <10065> Status = 0 0 0 0 ok 2011-Dec-14 04:13:13 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_135' 2011-Dec-14 04:13:13 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-14 04:13:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_137} 2011-Dec-14 04:13:13 INFO3 fixed_driftmap: Sending telescope to Az = 253.96 and ZA = 8.17 2011-Dec-14 04:13:13 LOG3 track_source: Calling 'track_source AGES3193_p3_137 253.96 8.1682911974 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-14 04:13:13 START begin_task: Starting task 'sending tracking commands' 2011-Dec-14 04:13:13 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2011-Dec-14 04:13:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_137} INFO {Slewing to source 'AGES3193_p3_137' ...} 2011-Dec-14 04:13:13 INFO1 track_source: Starting to track AGES3193_p3_137 2011-Dec-14 04:13:13 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_137" 2011-Dec-14 04:13:13 LOG3 vw_send: To DATATAKING: set ra 253.96 2011-Dec-14 04:13:13 LOG3 vw_send: To DATATAKING: set dec 8.1682911974 2011-Dec-14 04:13:13 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-14 04:13:13 LOG3 vw_send: To DATATAKING: pnt tr 253.96 8.1682911974 -CF 2011-Dec-14 04:13:13 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 04:13:13 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-14 04:13:13 LOG5 finish_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2011-Dec-14 04:13:13 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-14 04:13:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 04:13:13 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-14 04:13:13 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2011-Dec-14 04:13:13 START begin_task: Starting task 'rotate ALFA to -55.5 degrees' 2011-Dec-14 04:13:13 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2011-Dec-14 04:13:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -55.5 degrees ...} 2011-Dec-14 04:13:13 INFO2 rotate_alfa: ALFA commanded to -55.5 degrees 2011-Dec-14 04:13:13 LOG3 sock_errsend: To ALFAMOTOR: POSITION -55.5 REPLY 2011-Dec-14 04:13:13 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-14 04:13:13 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-14 04:13:13 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2011-Dec-14 04:13:13 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_137" 2011-Dec-14 04:13:13 LOG4 got_cormsg: From DATATAKING: set ra 253.96 2011-Dec-14 04:13:13 LOG4 got_cormsg: From DATATAKING: set dec 8.1682911974 2011-Dec-14 04:13:13 LOG4 got_cormsg: From DATATAKING: vw% 253.96 2011-Dec-14 04:13:13 LOG4 got_cormsg: From DATATAKING: vw% 8.1682911974 2011-Dec-14 04:13:13 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 04:13:13 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-14 04:13:13 LOG4 got_cormsg: From DATATAKING: pnt tr 253.96 8.1682911974 -CF 2011-Dec-14 04:13:13 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 04:13:13 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-14 04:13:13 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 04:13:19 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-14 04:13:19 INFO3 alfa_motor: ALFA rotator in-position -55.50 degrees 2011-Dec-14 04:13:19 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-14 04:13:19 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2011-Dec-14 04:13:19 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-14 04:13:19 STOP finish_task: Finishing task 'rotate ALFA to -55.5 degrees' 2011-Dec-14 04:13:19 LOG5 finish_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2011-Dec-14 04:13:19 INFO2 finish_task: DONE finished configuration: rotating ALFA to -55.5 degrees 2011-Dec-14 04:13:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 04:13:19 STOP end_task: Finishing task 'rotate ALFA to -55.5 degrees' with status 'OK' 2011-Dec-14 04:13:19 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2011-Dec-14 04:13:19 START begin_task: Starting task 'waiting on telescope' 2011-Dec-14 04:13:19 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2011-Dec-14 04:13:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-14 04:13:19 LOG3 waittrk: Start waittrk 5 2011-Dec-14 04:13:19 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-14 04:13:19 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2011-Dec-14 04:13:24 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-14 04:13:24 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2011-Dec-14 04:13:24 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-14 04:13:24 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2011-Dec-14 04:15:34 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-14 04:15:34 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2011-Dec-14 04:15:34 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-14 04:15:34 INFO2 waittrk: Now tracking AGES3193_p3_137 2011-Dec-14 04:15:34 LOG4 waittrk: Current telescope position: Az = 253.43 ZA = 8.16 2011-Dec-14 04:15:34 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-14 04:15:34 LOG5 finish_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2011-Dec-14 04:15:34 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-14 04:15:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 04:15:34 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-14 04:15:34 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2011-Dec-14 04:15:35 START begin_task: Starting task 'selecting calibration type' 2011-Dec-14 04:15:35 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2011-Dec-14 04:15:35 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-14 04:15:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-14 04:15:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 04:15:35 START begin_task: Starting task 'waiting on setcal' 2011-Dec-14 04:15:35 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2011-Dec-14 04:15:35 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-14 04:15:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 04:15:36 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 04:15:36 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-14 04:15:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-14 04:15:36 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2011-Dec-14 04:15:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-14 04:15:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-14 04:15:36 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-14 04:15:36 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-14 04:15:36 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2011-Dec-14 04:15:36 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 04:15:37 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-14 04:15:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-14 04:15:37 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2011-Dec-14 04:15:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-14 04:15:37 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-14 04:15:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-14 04:15:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-14 04:15:37 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-14 04:15:37 LOG5 begin_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2011-Dec-14 04:15:37 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-14 04:15:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-14 04:15:37 LOG5 end_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2011-Dec-14 04:15:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-14 04:15:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-14 04:15:37 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-14 04:15:37 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2011-Dec-14 04:15:37 LOG5 dopset_later: Calling 'dopset_later 56.787983810702315' 2011-Dec-14 04:15:37 INFO3 dopset_later: Setting Doppler correction for 04:16:34 (56.8 seconds from now) 2011-Dec-14 04:15:37 LOG5 antvel: Calling 'antvel 253.960000 8.168291 F Heliocentric 56.787983810702315' 2011-Dec-14 04:15:37 LOG2 antvel: Transforming current Az = 253.96 ZA = 8.17 to apparent RA = 09:53:41.4 Dec = +20:25:23.3 2011-Dec-14 04:15:37 LOG2 antvel: Parameters to Doppler: Heliocentric 29794 2011 348 0.0 2011-Dec-14 04:15:37 INFO5 antvel: Computed antenna velocity: -26.37439 km/s 2011-Dec-14 04:15:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-26.374388228699999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-14 04:15:37 INFO4 dopset_gen: New sky frequencies: 1381.364955 1381.364955 1381.364955 1381.364955 1381.364955 1381.364955 1381.364955 1381.364955 1381.364955 2011-Dec-14 04:15:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.364955 sky0=1381.364955 sky1=1381.364955 sky2=1381.364955 sky3=1381.364955 sky4=1381.364955 sky5=1381.364955 sky6=1381.364955 sky7=1381.364955 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-14 04:15:37 LOG2 dopset_gen: Result from 'sky2syn': 1631.364955 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-14 04:15:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631364955.0} 2011-Dec-14 04:15:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 04:15:37 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-14 04:15:37 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-14 04:15:37 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:07.7 Dec = +20:28:46.7 2011-Dec-14 04:15:37 LOG3 track_source: Calling 'track_source AGES3193_p3_137 095207.7 202846.7 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-14 04:15:37 START begin_task: Starting task 'sending tracking commands' 2011-Dec-14 04:15:37 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2011-Dec-14 04:15:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_137} INFO {Slewing to source 'AGES3193_p3_137' ...} 2011-Dec-14 04:15:37 INFO1 track_source: Starting to track AGES3193_p3_137 2011-Dec-14 04:15:37 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_137" 2011-Dec-14 04:15:37 LOG3 vw_send: To DATATAKING: set ra 095207.7 2011-Dec-14 04:15:37 LOG3 vw_send: To DATATAKING: set dec 202846.7 2011-Dec-14 04:15:37 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-14 04:15:37 LOG3 vw_send: To DATATAKING: pnt tr 095207.7 202846.7 -CJ 2011-Dec-14 04:15:37 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 04:15:38 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-14 04:15:38 LOG5 finish_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2011-Dec-14 04:15:38 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-14 04:15:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 04:15:38 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-14 04:15:38 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2011-Dec-14 04:15:38 START begin_task: Starting task 'waiting on telescope' 2011-Dec-14 04:15:38 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2011-Dec-14 04:15:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-14 04:15:38 LOG3 waittrk: Start waittrk 5 2011-Dec-14 04:15:38 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-14 04:15:38 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2011-Dec-14 04:15:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631364955.0} 2011-Dec-14 04:15:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 04:15:38 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 04:15:38 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_137" 2011-Dec-14 04:15:38 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 04:15:38 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 04:15:38 LOG4 got_cormsg: From DATATAKING: set ra 095207.7 2011-Dec-14 04:15:38 LOG4 got_cormsg: From DATATAKING: set dec 202846.7 2011-Dec-14 04:15:38 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-14 04:15:38 LOG4 got_cormsg: From DATATAKING: pnt tr 095207.7 202846.7 -CJ 2011-Dec-14 04:15:38 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 04:15:38 LOG4 got_cormsg: From DATATAKING: 095207.7 2011-Dec-14 04:15:38 LOG4 got_cormsg: From DATATAKING: vw% 202846.7 2011-Dec-14 04:15:38 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2011-Dec-14 04:15:43 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-14 04:15:43 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2011-Dec-14 04:15:43 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-14 04:15:43 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2011-Dec-14 04:15:46 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-14 04:15:46 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2011-Dec-14 04:15:46 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-14 04:15:46 INFO2 waittrk: Now tracking AGES3193_p3_137 2011-Dec-14 04:15:46 LOG4 waittrk: Current telescope position: Az = 253.43 ZA = 8.15 2011-Dec-14 04:15:46 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-14 04:15:46 LOG5 finish_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2011-Dec-14 04:15:46 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-14 04:15:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 04:15:46 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-14 04:15:46 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2011-Dec-14 04:15:46 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-14 04:15:46 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2011-Dec-14 04:15:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-14 04:15:46 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-14 04:15:46 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-14 04:15:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-14 04:15:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 04:15:46 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-14 04:15:46 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2011-Dec-14 04:15:46 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-14 04:15:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 04:15:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 04:15:49 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-14 04:15:49 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-14 04:15:49 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2011-Dec-14 04:15:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-14 04:15:49 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-14 04:15:49 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2011-Dec-14 04:15:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-14 04:15:49 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-14 04:15:49 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-14 04:15:49 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-14 04:15:49 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-14 04:15:49 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-14 04:15:49 LOG5 begin_task: Level: (5) ID = <10083> Status = 0 0 0 0 ok 2011-Dec-14 04:15:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-14 04:15:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 04:15:49 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 7 5 dB 2011-Dec-14 04:15:49 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 3 dB 2011-Dec-14 04:15:49 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 4 dB --- beam 3: 2 2 dB 2011-Dec-14 04:15:49 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2011-Dec-14 04:15:50 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-14 04:15:50 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-14 04:15:50 LOG5 end_task: Level: (5) ID = <10083> Status = 0 0 0 0 ok 2011-Dec-14 04:15:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.088 0.990 ALFA beam 1: 1.112 1.092 2011-Dec-14 04:15:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.054 0.941 ALFA beam 3: 0.984 1.051 2011-Dec-14 04:15:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.773 1.026 ALFA beam 5: 0.897 1.057 2011-Dec-14 04:15:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.065 0.014 ALFA beam 7: 0.925 0.014 2011-Dec-14 04:15:50 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-14 04:15:50 LOG5 finish_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2011-Dec-14 04:15:50 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-14 04:15:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 04:15:50 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-14 04:15:50 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2011-Dec-14 04:15:50 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-14 04:15:50 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2011-Dec-14 04:15:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-14 04:15:50 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-14 04:15:50 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-14 04:15:50 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-14 04:15:50 LOG5 begin_task: Level: (5) ID = <10085> Status = 0 0 0 0 ok 2011-Dec-14 04:15:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-14 04:15:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.088 0.990 1.112 1.092 2011-Dec-14 04:15:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.054 0.941 0.984 1.051 2011-Dec-14 04:15:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.773 1.026 0.897 1.057 2011-Dec-14 04:15:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.014 0.925 0.014 2011-Dec-14 04:15:55 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.3 27.5 B 29.1 29.2 mn:A 0.0 -0.0 B -0.3 -0.3 gn: 11 11 2011-Dec-14 04:15:55 INFO3 from_mock: From MOCK: b0s1g0 rms:A 31.6 30.2 B 30.5 32.3 mn:A 0.1 -0.4 B -0.4 0.3 gn: 12 12 2011-Dec-14 04:15:55 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.0 28.1 B 31.9 28.0 mn:A 0.7 0.6 B 0.1 -0.0 gn: 7 11 2011-Dec-14 04:15:55 INFO3 from_mock: From MOCK: b1s1g0 rms:A 33.2 30.6 B 30.3 30.3 mn:A -0.2 -0.3 B 0.5 0.2 gn: 9 10 2011-Dec-14 04:15:55 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.0 30.0 B 27.6 28.8 mn:A -0.1 -0.3 B 0.4 0.1 gn: 11 11 2011-Dec-14 04:15:55 INFO3 from_mock: From MOCK: b2s1g0 rms:A 31.8 32.1 B 31.9 29.6 mn:A 0.3 -0.2 B 0.1 0.2 gn: 12 12 2011-Dec-14 04:15:55 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.4 31.1 B 30.2 26.9 mn:A 0.3 -0.3 B 0.0 -0.2 gn: 13 12 2011-Dec-14 04:15:55 INFO3 from_mock: From MOCK: b3s1g0 rms:A 29.4 28.6 B 28.7 29.9 mn:A -0.3 0.4 B 0.1 0.2 gn: 12 12 2011-Dec-14 04:15:55 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.3 28.4 B 30.4 30.6 mn:A -0.1 -0.3 B -0.4 0.0 gn: 13 12 2011-Dec-14 04:15:55 INFO3 from_mock: From MOCK: b4s1g0 rms:A 31.3 28.3 B 29.3 28.3 mn:A -0.0 -0.0 B -0.4 0.2 gn: 16 13 2011-Dec-14 04:15:55 INFO3 from_mock: From MOCK: b5s0g0 rms:A 32.0 30.8 B 29.9 29.9 mn:A 0.3 0.4 B -0.0 0.5 gn: 13 11 2011-Dec-14 04:15:55 INFO3 from_mock: From MOCK: b5s1g0 rms:A 28.7 28.5 B 30.3 30.0 mn:A -0.4 0.2 B -0.0 0.2 gn: 12 11 2011-Dec-14 04:15:55 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.1 29.5 B 14.3 14.7 mn:A -0.5 0.2 B 0.3 -0.4 gn: 13 31 2011-Dec-14 04:15:55 INFO3 from_mock: From MOCK: b6s1g0 rms:A 32.7 29.7 B 11.3 10.9 mn:A 0.7 0.5 B 0.2 0.2 gn: 14 31 2011-Dec-14 04:15:55 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-14 04:15:55 LOG5 end_task: Level: (5) ID = <10085> Status = 0 0 0 0 ok 2011-Dec-14 04:15:55 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-14 04:15:55 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-14 04:15:55 LOG5 finish_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2011-Dec-14 04:15:55 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-14 04:15:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 04:15:56 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-14 04:15:56 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2011-Dec-14 04:15:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-14 04:15:56 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-14 04:15:56 LOG5 finish_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2011-Dec-14 04:15:56 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-14 04:15:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 04:15:56 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-14 04:15:56 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2011-Dec-14 04:15:56 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 04:15:56 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 04:15:56 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 04:15:56 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 04:15:56 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-14 04:15:56 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-14 04:15:56 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2011-Dec-14 04:15:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-14 04:15:56 START begin_task: Starting task 'selecting calibration type' 2011-Dec-14 04:15:56 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2011-Dec-14 04:15:56 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-14 04:15:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-14 04:15:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 04:15:56 START begin_task: Starting task 'waiting on setcal' 2011-Dec-14 04:15:56 LOG5 begin_task: Level: (5) ID = <10088> Status = 0 0 0 0 ok 2011-Dec-14 04:15:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Ellioty Gonzalez' 2011-Dec-14 04:15:56 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-14 04:15:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 04:15:56 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 04:15:56 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-14 04:15:56 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-14 04:15:56 LOG5 end_task: Level: (5) ID = <10088> Status = 0 0 0 0 ok 2011-Dec-14 04:15:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-14 04:15:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-14 04:15:56 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-14 04:15:56 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-14 04:15:56 LOG5 begin_task: Level: (5) ID = <10089> Status = 0 0 0 0 ok 2011-Dec-14 04:15:56 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 04:15:56 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-14 04:15:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-14 04:15:56 LOG5 end_task: Level: (5) ID = <10089> Status = 0 0 0 0 ok 2011-Dec-14 04:15:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-14 04:15:56 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-14 04:15:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-14 04:15:56 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-14 04:15:56 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-14 04:15:56 LOG5 begin_task: Level: (5) ID = <10090> Status = 0 0 0 0 ok 2011-Dec-14 04:15:56 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-14 04:15:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-14 04:15:56 LOG5 end_task: Level: (5) ID = <10090> Status = 0 0 0 0 ok 2011-Dec-14 04:15:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-14 04:15:56 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-14 04:15:56 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-14 04:15:56 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2011-Dec-14 04:15:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-14 04:15:56 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-14 04:15:56 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-14 04:15:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-14 04:15:56 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2011-Dec-14 04:15:56 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-14 04:15:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-14 04:15:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-14 04:15:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-14 04:15:56 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2011-Dec-14 04:15:56 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-14 04:15:56 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-14 04:15:56 LOG5 begin_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2011-Dec-14 04:15:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-14 04:15:57 LOG5 log_alfabeam: Parameters: 9.8688055555555554 20.479638888888889 9.325793 2011.9532586761984 -55.500065 2011-Dec-14 04:15:57 LOG4 log_alfabeam: ALFABEAM 0 9.868805555555554 20.479638888888893 2011-Dec-14 04:15:57 LOG4 log_alfabeam: ALFABEAM 1 9.869693501496892 20.389034211042745 2011-Dec-14 04:15:57 LOG4 log_alfabeam: ALFABEAM 2 9.875741926764800 20.449063160825009 2011-Dec-14 04:15:57 LOG4 log_alfabeam: ALFABEAM 3 9.874808461917191 20.540659508747524 2011-Dec-14 04:15:57 LOG4 log_alfabeam: ALFABEAM 4 9.867843007873962 20.570188195646821 2011-Dec-14 04:15:57 LOG4 log_alfabeam: ALFABEAM 5 9.861862154006173 20.508991627803724 2011-Dec-14 04:15:57 LOG4 log_alfabeam: ALFABEAM 6 9.862778940619140 20.419430722298017 2011-Dec-14 04:15:57 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-14 04:15:57 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-14 04:15:57 LOG3 take_mock_data: PSET configuration: obsnm=Ellioty Gonzalez 2011-Dec-14 04:15:57 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_137 2011-Dec-14 04:15:57 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-14 04:15:57 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-14 04:15:57 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-14 04:15:57 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-14 04:15:57 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-14 04:15:57 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-14 04:15:57 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-14 04:15:57 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-14 04:15:57 LOG3 take_mock_data: PSET configuration: patternid=134800003 2011-Dec-14 04:15:57 LOG3 take_mock_data: PSET configuration: scanid=134800004 2011-Dec-14 04:15:57 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-14 04:15:57 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-14 04:15:57 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-14 04:15:57 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456364955.0 2011-Dec-14 04:15:57 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306364955.0 2011-Dec-14 04:15:57 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-14 04:15:57 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-14 04:15:57 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Ellioty Gonzalez:object=AGES3193_p3_137:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=134800003:scanid=134800004:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456364955.0:topobfreqhz=1306364955.0:filetype=1 2011-Dec-14 04:15:57 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-14 04:15:57 LOG5 begin_task: Level: (5) ID = <10093> Status = 0 0 0 0 ok 2011-Dec-14 04:15:57 LOG4 from_mock: From MOCK: psetok 2011-Dec-14 04:15:57 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-14 04:15:57 LOG5 end_task: Level: (5) ID = <10093> Status = 0 0 0 0 ok 2011-Dec-14 04:15:57 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-14 04:15:57 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-14 04:15:57 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-14 04:15:57 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-14 04:15:57 LOG5 begin_task: Level: (5) ID = <10094> Status = 0 0 0 0 ok 2011-Dec-14 04:15:57 NOTE WAPPDATA-new_file: New FITS file: wapp.20111214.a2048.0001.fits 2011-Dec-14 04:15:57 LOG4 from_mock: From MOCK: starok 2011-Dec-14 04:15:57 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-14 04:15:57 LOG5 end_task: Level: (5) ID = <10094> Status = 0 0 0 0 ok 2011-Dec-14 04:15:57 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-14 04:15:57 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134800004 2011-Dec-14 04:15:57 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-14 04:15:57 LOG5 begin_task: Level: (5) ID = <10095> Status = 0 0 0 0 ok 2011-Dec-14 04:15:57 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111214.a2048.0001.fits} 2011-Dec-14 04:15:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 04:15:57 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-14 04:15:57 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-14 04:15:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-14 04:15:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29758.00 2011-Dec-14 04:15:59 INFO2 got_mock_message: Mock spectrometer start file number is 00300 2011-Dec-14 04:15:59 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-14 04:15:59 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-14 04:15:59 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-14 04:15:59 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-14 04:15:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-14 04:15:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-14 04:15:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-14 04:15:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-14 04:15:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-14 04:15:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-14 04:15:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-14 04:15:59 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-14 04:15:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 04:15:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 04:15:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 04:15:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 04:15:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 04:15:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 04:15:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 04:16:02 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:16:02.01 2011-Dec-14 04:16:02 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323850562.01 Wed Dec 14 04:16:02 2011 2011-Dec-14 04:16:02 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-14 04:16:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.364955 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 04:16:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.364955 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 04:16:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.364955 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 04:16:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.364955 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 04:16:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.364955 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 04:16:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.364955 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 04:16:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.364955 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 04:16:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.364955 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 04:16:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.364955 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 04:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.512 (still bad) 2011-Dec-14 04:16:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 04:16:07 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-14 04:16:08 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-14 04:16:08 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-14 04:16:08 LOG5 end_task: Level: (5) ID = <10095> Status = 0 0 0 0 ok 2011-Dec-14 04:16:08 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-14 04:16:08 LOG5 end_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2011-Dec-14 04:16:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-14 04:16:08 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-14 04:16:08 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-14 04:16:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-14 04:16:08 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2011-Dec-14 04:16:08 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-14 04:16:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-14 04:16:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-14 04:16:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-14 04:16:08 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2011-Dec-14 04:16:08 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-14 04:16:08 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-14 04:16:08 LOG5 begin_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2011-Dec-14 04:16:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-14 04:16:08 LOG5 log_alfabeam: Parameters: 9.8688055555555554 20.479638888888889 9.328857 2011.9532590247675 -55.500065 2011-Dec-14 04:16:08 LOG4 log_alfabeam: ALFABEAM 0 9.868805555555554 20.479638888888893 2011-Dec-14 04:16:08 LOG4 log_alfabeam: ALFABEAM 1 9.869703024759451 20.389053003697363 2011-Dec-14 04:16:08 LOG4 log_alfabeam: ALFABEAM 2 9.875745190253532 20.449207121488588 2011-Dec-14 04:16:08 LOG4 log_alfabeam: ALFABEAM 3 9.874801830651517 20.540788897416896 2011-Dec-14 04:16:08 LOG4 log_alfabeam: ALFABEAM 4 9.867833092356431 20.570167528207357 2011-Dec-14 04:16:08 LOG4 log_alfabeam: ALFABEAM 5 9.861859005093676 20.508841407534057 2011-Dec-14 04:16:08 LOG4 log_alfabeam: ALFABEAM 6 9.862785334251068 20.419305349135950 2011-Dec-14 04:16:08 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-14 04:16:08 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-14 04:16:08 LOG3 take_mock_data: PSET configuration: obsnm=Ellioty Gonzalez 2011-Dec-14 04:16:08 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_137 2011-Dec-14 04:16:08 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-14 04:16:08 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-14 04:16:08 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-14 04:16:08 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-14 04:16:08 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-14 04:16:08 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-14 04:16:08 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-14 04:16:08 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-14 04:16:08 LOG3 take_mock_data: PSET configuration: patternid=134800003 2011-Dec-14 04:16:08 LOG3 take_mock_data: PSET configuration: scanid=134800005 2011-Dec-14 04:16:08 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-14 04:16:08 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-14 04:16:08 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-14 04:16:08 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456364955.0 2011-Dec-14 04:16:08 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306364955.0 2011-Dec-14 04:16:08 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-14 04:16:08 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-14 04:16:08 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Ellioty Gonzalez:object=AGES3193_p3_137:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=134800003:scanid=134800005:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456364955.0:topobfreqhz=1306364955.0:filetype=1 2011-Dec-14 04:16:08 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-14 04:16:08 LOG5 begin_task: Level: (5) ID = <10098> Status = 0 0 0 0 ok 2011-Dec-14 04:16:08 LOG4 from_mock: From MOCK: psetok 2011-Dec-14 04:16:08 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-14 04:16:08 LOG5 end_task: Level: (5) ID = <10098> Status = 0 0 0 0 ok 2011-Dec-14 04:16:08 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-14 04:16:08 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-14 04:16:08 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-14 04:16:08 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-14 04:16:08 LOG5 begin_task: Level: (5) ID = <10099> Status = 0 0 0 0 ok 2011-Dec-14 04:16:08 LOG4 from_mock: From MOCK: starok 2011-Dec-14 04:16:08 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-14 04:16:08 LOG5 end_task: Level: (5) ID = <10099> Status = 0 0 0 0 ok 2011-Dec-14 04:16:08 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-14 04:16:08 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134800005 2011-Dec-14 04:16:08 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-14 04:16:08 LOG5 begin_task: Level: (5) ID = <10100> Status = 0 0 0 0 ok 2011-Dec-14 04:16:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 04:16:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29769.00 2011-Dec-14 04:16:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-14 04:16:09 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-14 04:16:09 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-14 04:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.512 (still bad) 2011-Dec-14 04:16:11 INFO2 got_mock_message: Mock spectrometer start file number is 00400 2011-Dec-14 04:16:11 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-14 04:16:11 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-14 04:16:11 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-14 04:16:11 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-14 04:16:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-14 04:16:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-14 04:16:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-14 04:16:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-14 04:16:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-14 04:16:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-14 04:16:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-14 04:16:11 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-14 04:16:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 04:16:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 04:16:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 04:16:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 04:16:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 04:16:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 04:16:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 04:16:14 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:16:14.01 2011-Dec-14 04:16:14 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323850574.01 Wed Dec 14 04:16:14 2011 2011-Dec-14 04:16:14 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-14 04:16:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.364955 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 04:16:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.364955 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 04:16:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.364955 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 04:16:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.364955 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 04:16:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.364955 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 04:16:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.364955 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 04:16:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.364955 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 04:16:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.364955 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 04:16:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.364955 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 04:16:14 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-14 04:16:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 04:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-14 04:16:19 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-14 04:16:20 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-14 04:16:20 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-14 04:16:20 LOG5 end_task: Level: (5) ID = <10100> Status = 0 0 0 0 ok 2011-Dec-14 04:16:20 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-14 04:16:20 LOG5 end_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2011-Dec-14 04:16:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-14 04:16:20 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-14 04:16:20 LOG5 finish_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2011-Dec-14 04:16:20 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-14 04:16:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 04:16:20 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-14 04:16:20 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2011-Dec-14 04:16:20 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-14 04:16:20 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 253.96 and ZA = 8.17 2011-Dec-14 04:16:20 LOG3 track_source: Calling 'track_source AGES3193_p3_137 253.96 8.1682911974 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-14 04:16:20 START begin_task: Starting task 'sending tracking commands' 2011-Dec-14 04:16:20 LOG5 begin_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2011-Dec-14 04:16:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_137} INFO {Slewing to source 'AGES3193_p3_137' ...} 2011-Dec-14 04:16:20 INFO1 track_source: Starting to track AGES3193_p3_137 2011-Dec-14 04:16:20 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_137" 2011-Dec-14 04:16:20 LOG3 vw_send: To DATATAKING: set ra 253.96 2011-Dec-14 04:16:20 LOG3 vw_send: To DATATAKING: set dec 8.1682911974 2011-Dec-14 04:16:20 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-14 04:16:20 LOG3 vw_send: To DATATAKING: pnt tr 253.96 8.1682911974 -CF 2011-Dec-14 04:16:20 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 04:16:20 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-14 04:16:20 LOG5 finish_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2011-Dec-14 04:16:20 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-14 04:16:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 04:16:20 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-14 04:16:20 LOG5 end_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2011-Dec-14 04:16:20 LOG1 fixed_driftmap: Parameters: HA = -00:33:30.8 Start = 09:20:10.7 LST = 09:19:55.9 diff = 14.8 secs 2011-Dec-14 04:16:20 INFO2 fixed_driftmap: Waiting 12.8 seconds for RA 9:53:42 2011-Dec-14 04:16:20 INFO2 lstwait: Waiting for 12.8 secs from LST 09:19:56 to LST 09:20:09 ... 2011-Dec-14 04:16:20 LOG4 send_obs_status: To obs_status: <1> TASKTIME 12.795629399825241 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-14 04:16:20 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-14 04:16:20 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2011-Dec-14 04:16:20 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_137" 2011-Dec-14 04:16:20 LOG4 got_cormsg: From DATATAKING: set ra 253.96 2011-Dec-14 04:16:20 LOG4 got_cormsg: From DATATAKING: set dec 8.1682911974 2011-Dec-14 04:16:20 LOG4 got_cormsg: From DATATAKING: vw% 253.96 2011-Dec-14 04:16:20 LOG4 got_cormsg: From DATATAKING: vw% 8.1682911974 2011-Dec-14 04:16:20 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 04:16:20 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-14 04:16:20 LOG4 got_cormsg: From DATATAKING: pnt tr 253.96 8.1682911974 -CF 2011-Dec-14 04:16:20 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 04:16:20 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-14 04:16:20 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 04:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-14 04:16:33 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-14 04:16:33 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2011-Dec-14 04:16:33 LOG4 lstwait: Finished waiting 1.21 seconds late 2011-Dec-14 04:16:33 INFO3 lstwait: Finished waiting 2011-Dec-14 04:16:33 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-14 04:16:33 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-14 04:16:33 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-14 04:16:33 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-14 04:16:33 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-14 04:16:33 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-14 04:16:33 LOG5 begin_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2011-Dec-14 04:16:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-14 04:16:33 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-14 04:16:33 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-14 04:16:33 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-14 04:16:33 LOG3 take_mock_data: PSET configuration: obsnm=Ellioty Gonzalez 2011-Dec-14 04:16:33 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_137 2011-Dec-14 04:16:33 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-14 04:16:33 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-14 04:16:33 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-14 04:16:33 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-14 04:16:33 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-14 04:16:33 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-14 04:16:33 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-14 04:16:33 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-14 04:16:33 LOG3 take_mock_data: PSET configuration: patternid=134800006 2011-Dec-14 04:16:33 LOG3 take_mock_data: PSET configuration: scanid=134800006 2011-Dec-14 04:16:33 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-14 04:16:33 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-14 04:16:33 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-14 04:16:33 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456364955.0 2011-Dec-14 04:16:33 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306364955.0 2011-Dec-14 04:16:33 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-14 04:16:33 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-14 04:16:33 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Ellioty Gonzalez:object=AGES3193_p3_137:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=134800006:scanid=134800006:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456364955.0:topobfreqhz=1306364955.0:filetype=1 2011-Dec-14 04:16:33 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-14 04:16:33 LOG5 begin_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2011-Dec-14 04:16:33 LOG4 from_mock: From MOCK: psetok 2011-Dec-14 04:16:33 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-14 04:16:33 LOG5 end_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2011-Dec-14 04:16:33 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-14 04:16:33 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-14 04:16:33 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-14 04:16:33 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-14 04:16:33 LOG5 begin_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2011-Dec-14 04:16:33 LOG4 from_mock: From MOCK: starok 2011-Dec-14 04:16:33 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-14 04:16:33 LOG5 end_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2011-Dec-14 04:16:33 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-14 04:16:33 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 134800006 2011-Dec-14 04:16:34 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-14 04:16:34 LOG5 begin_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2011-Dec-14 04:16:34 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-14 04:16:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 04:16:34 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-14 04:16:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-14 04:16:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29795.00 2011-Dec-14 04:16:35 INFO2 got_mock_message: Mock spectrometer start file number is 00500 2011-Dec-14 04:16:35 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-14 04:16:35 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1199.9 s 2011-Dec-14 04:16:35 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-14 04:16:35 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-14 04:16:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-14 04:16:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-14 04:16:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-14 04:16:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-14 04:16:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-14 04:16:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-14 04:16:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-14 04:16:35 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-14 04:16:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 04:16:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 04:16:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 04:16:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 04:16:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 04:16:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 04:16:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 04:16:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.364955 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 04:16:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.364955 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 04:16:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.364955 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 04:16:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.364955 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 04:16:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.364955 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 04:16:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.364955 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 04:16:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.364955 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 04:16:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.364955 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 04:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-14 04:16:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.364955 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 04:16:38 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:16:38.02 2011-Dec-14 04:16:38 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323850598.02 Wed Dec 14 04:16:38 2011 2011-Dec-14 04:16:38 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-14 04:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-14 04:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 04:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 04:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 04:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 04:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 04:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-14 04:16:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-14 04:16:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.091 0.990 1.111 1.092 2011-Dec-14 04:16:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 0.942 0.986 1.053 2011-Dec-14 04:16:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.772 1.025 0.901 1.059 2011-Dec-14 04:16:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.061 0.020 0.924 0.020 2011-Dec-14 04:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 04:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 04:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 04:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 04:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-14 04:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-14 04:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-14 04:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 04:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 04:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 04:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-14 04:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 04:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 04:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 04:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-14 04:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 04:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-14 04:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 04:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 04:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 04:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 04:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 04:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 04:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 04:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 04:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 04:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 04:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-14 04:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 04:17:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-14 04:17:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.092 0.992 1.114 1.094 2011-Dec-14 04:17:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.032 0.943 0.985 1.053 2011-Dec-14 04:17:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.784 1.045 0.899 1.056 2011-Dec-14 04:17:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.063 0.022 0.924 0.022 2011-Dec-14 04:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-14 04:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 04:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 04:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 04:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-14 04:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-14 04:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 04:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-14 04:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-14 04:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-14 04:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-14 04:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-14 04:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-14 04:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-14 04:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-14 04:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2011-Dec-14 04:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-14 04:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-14 04:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-14 04:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-14 04:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-14 04:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-14 04:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 04:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 04:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 04:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-14 04:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-14 04:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-14 04:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 04:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2011-Dec-14 04:18:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-14 04:18:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.091 0.992 1.114 1.097 2011-Dec-14 04:18:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.032 0.947 0.985 1.052 2011-Dec-14 04:18:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.774 1.027 0.895 1.054 2011-Dec-14 04:18:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.022 0.926 0.022 2011-Dec-14 04:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-14 04:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2011-Dec-14 04:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-14 04:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2011-Dec-14 04:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2011-Dec-14 04:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-14 04:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2011-Dec-14 04:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2011-Dec-14 04:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-14 04:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 04:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 04:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 04:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 04:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 04:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-14 04:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 04:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-14 04:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-14 04:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-14 04:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-14 04:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-14 04:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 04:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 04:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 04:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-14 04:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-14 04:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 04:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 04:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2011-Dec-14 04:19:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-14 04:19:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.092 0.994 1.116 1.097 2011-Dec-14 04:19:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 0.948 0.990 1.055 2011-Dec-14 04:19:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.777 1.032 0.899 1.058 2011-Dec-14 04:19:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.022 0.927 0.022 2011-Dec-14 04:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2011-Dec-14 04:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2011-Dec-14 04:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 04:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2011-Dec-14 04:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-14 04:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-14 04:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-14 04:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-14 04:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-14 04:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 04:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 04:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 04:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 04:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 04:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 04:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-14 04:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-14 04:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-14 04:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 04:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 04:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 04:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.114 (still bad) 2011-Dec-14 04:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.114 (still bad) 2011-Dec-14 04:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.114 (still bad) 2011-Dec-14 04:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.113 (still bad) 2011-Dec-14 04:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.114 (still bad) 2011-Dec-14 04:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 04:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2011-Dec-14 04:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-14 04:20:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-14 04:20:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.088 0.992 1.114 1.098 2011-Dec-14 04:20:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 0.948 0.986 1.054 2011-Dec-14 04:20:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.774 1.029 0.896 1.056 2011-Dec-14 04:20:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.022 0.926 0.023 2011-Dec-14 04:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-14 04:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-14 04:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 04:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 04:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 04:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 04:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 04:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 04:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 04:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 04:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 04:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-14 04:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 04:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 04:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 04:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-14 04:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-14 04:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 04:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 04:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-14 04:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-14 04:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2011-Dec-14 04:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-14 04:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-14 04:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2011-Dec-14 04:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-14 04:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 04:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-14 04:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 04:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 04:21:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-14 04:22:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.090 0.994 1.117 1.097 2011-Dec-14 04:22:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 0.947 0.987 1.054 2011-Dec-14 04:22:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.775 1.031 0.898 1.059 2011-Dec-14 04:22:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 0.022 0.922 0.022 2011-Dec-14 04:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 04:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2011-Dec-14 04:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 04:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 04:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2011-Dec-14 04:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-14 04:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 04:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 04:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 04:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 04:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 04:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-14 04:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 04:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2011-Dec-14 04:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2011-Dec-14 04:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-14 04:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-14 04:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2011-Dec-14 04:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2011-Dec-14 04:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-14 04:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-14 04:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-14 04:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-14 04:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-14 04:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 04:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-14 04:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 04:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2011-Dec-14 04:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2011-Dec-14 04:23:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-14 04:23:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.098 1.000 1.120 1.104 2011-Dec-14 04:23:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.093 0.954 0.991 1.062 2011-Dec-14 04:23:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.779 1.037 0.903 1.064 2011-Dec-14 04:23:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.072 0.021 0.932 0.022 2011-Dec-14 04:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2011-Dec-14 04:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2011-Dec-14 04:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-14 04:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2011-Dec-14 04:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-14 04:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 04:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2011-Dec-14 04:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2011-Dec-14 04:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2011-Dec-14 04:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2011-Dec-14 04:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2011-Dec-14 04:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-14 04:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-14 04:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 04:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-14 04:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-14 04:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-14 04:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 04:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-14 04:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-14 04:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-14 04:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 04:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 04:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 04:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 04:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 04:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 04:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 04:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2011-Dec-14 04:24:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-14 04:24:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.096 0.999 1.122 1.103 2011-Dec-14 04:24:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 0.952 0.992 1.060 2011-Dec-14 04:24:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.780 1.037 0.906 1.064 2011-Dec-14 04:24:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.067 0.022 0.928 0.022 2011-Dec-14 04:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 04:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 04:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 04:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 04:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 04:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 04:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-14 04:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-14 04:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-14 04:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 04:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-14 04:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-14 04:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-14 04:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-14 04:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-14 04:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-14 04:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-14 04:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 04:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 04:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-14 04:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 04:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 04:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-14 04:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 04:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-14 04:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-14 04:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 04:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 04:25:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-14 04:25:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 1.005 1.123 1.105 2011-Dec-14 04:25:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.099 0.962 0.995 1.064 2011-Dec-14 04:25:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.781 1.040 0.904 1.068 2011-Dec-14 04:25:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.072 0.020 0.932 0.020 2011-Dec-14 04:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 04:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 04:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-14 04:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 04:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-14 04:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-14 04:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-14 04:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-14 04:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-14 04:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-14 04:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-14 04:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 04:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-14 04:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 04:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 04:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 04:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 04:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2011-Dec-14 04:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.114 (still bad) 2011-Dec-14 04:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-14 04:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-14 04:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-14 04:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-14 04:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2011-Dec-14 04:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2011-Dec-14 04:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2011-Dec-14 04:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2011-Dec-14 04:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2011-Dec-14 04:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 04:26:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-14 04:26:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.098 1.003 1.118 1.100 2011-Dec-14 04:26:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 0.951 0.991 1.058 2011-Dec-14 04:26:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.778 1.035 0.904 1.061 2011-Dec-14 04:26:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.022 0.929 0.023 2011-Dec-14 04:26:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 04:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 04:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 04:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 04:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 04:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 04:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 04:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 04:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 04:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 04:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-14 04:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-14 04:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-14 04:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-14 04:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-14 04:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-14 04:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-14 04:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 04:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-14 04:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-14 04:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-14 04:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-14 04:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-14 04:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-14 04:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-14 04:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-14 04:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-14 04:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-14 04:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 04:27:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-14 04:27:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.093 0.996 1.117 1.102 2011-Dec-14 04:27:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.097 0.959 0.992 1.060 2011-Dec-14 04:27:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.779 1.037 0.905 1.062 2011-Dec-14 04:27:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.022 0.929 0.022 2011-Dec-14 04:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 04:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 04:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 04:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2011-Dec-14 04:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-14 04:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-14 04:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-14 04:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-14 04:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-14 04:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-14 04:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 04:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 04:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 04:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2011-Dec-14 04:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2011-Dec-14 04:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2011-Dec-14 04:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-14 04:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-14 04:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2011-Dec-14 04:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.148 (still bad) 2011-Dec-14 04:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.173 (still bad) 2011-Dec-14 04:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.203 (still bad) 2011-Dec-14 04:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.211 (still bad) 2011-Dec-14 04:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.213 (still bad) 2011-Dec-14 04:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.213 (still bad) 2011-Dec-14 04:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.195 (still bad) 2011-Dec-14 04:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.175 (still bad) 2011-Dec-14 04:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.161 (still bad) 2011-Dec-14 04:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2011-Dec-14 04:28:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-14 04:28:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.113 1.018 1.120 1.102 2011-Dec-14 04:28:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 0.953 0.989 1.059 2011-Dec-14 04:28:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.778 1.036 0.907 1.069 2011-Dec-14 04:28:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.067 0.020 0.929 0.020 2011-Dec-14 04:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-14 04:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-14 04:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-14 04:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2011-Dec-14 04:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 04:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2011-Dec-14 04:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2011-Dec-14 04:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-14 04:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.129 (still bad) 2011-Dec-14 04:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-14 04:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 04:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 04:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2011-Dec-14 04:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 04:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2011-Dec-14 04:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-14 04:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-14 04:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-14 04:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-14 04:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-14 04:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2011-Dec-14 04:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 04:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2011-Dec-14 04:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 04:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 04:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 04:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2011-Dec-14 04:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 04:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 04:29:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-14 04:29:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.092 1.000 1.122 1.104 2011-Dec-14 04:29:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 0.953 0.993 1.061 2011-Dec-14 04:29:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.780 1.035 0.906 1.065 2011-Dec-14 04:29:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.022 0.929 0.022 2011-Dec-14 04:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 04:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 04:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2011-Dec-14 04:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 04:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 04:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 04:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-14 04:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-14 04:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2011-Dec-14 04:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2011-Dec-14 04:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2011-Dec-14 04:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2011-Dec-14 04:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2011-Dec-14 04:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2011-Dec-14 04:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2011-Dec-14 04:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2011-Dec-14 04:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.128 (still bad) 2011-Dec-14 04:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.126 (still bad) 2011-Dec-14 04:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.128 (still bad) 2011-Dec-14 04:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2011-Dec-14 04:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-14 04:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.128 (still bad) 2011-Dec-14 04:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 04:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-14 04:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2011-Dec-14 04:30:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-14 04:30:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.111 1.020 1.132 1.111 2011-Dec-14 04:30:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.102 0.962 1.005 1.076 2011-Dec-14 04:30:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.788 1.052 0.913 1.074 2011-Dec-14 04:30:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 0.022 0.941 0.022 2011-Dec-14 04:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.132 (still bad) 2011-Dec-14 04:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.131 (still bad) 2011-Dec-14 04:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-14 04:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 04:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2011-Dec-14 04:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2011-Dec-14 04:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-14 04:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.129 (still bad) 2011-Dec-14 04:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-14 04:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-14 04:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-14 04:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-14 04:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-14 04:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-14 04:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 04:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 04:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 04:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 04:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 04:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-14 04:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 04:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.129 (still bad) 2011-Dec-14 04:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 04:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-14 04:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 04:31:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-14 04:31:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.092 1.002 1.121 1.100 2011-Dec-14 04:31:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 0.953 0.992 1.062 2011-Dec-14 04:31:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.790 1.056 0.902 1.064 2011-Dec-14 04:31:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.067 0.022 0.929 0.022 2011-Dec-14 04:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 04:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2011-Dec-14 04:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 04:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 04:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2011-Dec-14 04:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 04:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 04:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 04:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 04:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2011-Dec-14 04:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 04:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 04:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-14 04:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 04:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 04:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2011-Dec-14 04:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 04:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 04:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-14 04:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2011-Dec-14 04:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 04:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2011-Dec-14 04:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:32:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-14 04:32:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.094 1.000 1.124 1.104 2011-Dec-14 04:32:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 0.953 0.993 1.061 2011-Dec-14 04:32:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.780 1.038 0.903 1.066 2011-Dec-14 04:32:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.070 0.021 0.930 0.021 2011-Dec-14 04:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2011-Dec-14 04:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2011-Dec-14 04:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2011-Dec-14 04:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2011-Dec-14 04:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2011-Dec-14 04:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2011-Dec-14 04:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2011-Dec-14 04:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-14 04:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-14 04:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2011-Dec-14 04:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2011-Dec-14 04:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-14 04:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-14 04:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2011-Dec-14 04:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2011-Dec-14 04:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-14 04:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2011-Dec-14 04:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-14 04:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-14 04:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2011-Dec-14 04:33:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-14 04:33:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.097 1.003 1.124 1.104 2011-Dec-14 04:33:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 0.955 0.993 1.063 2011-Dec-14 04:33:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.782 1.038 0.905 1.066 2011-Dec-14 04:33:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.072 0.021 0.934 0.021 2011-Dec-14 04:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2011-Dec-14 04:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2011-Dec-14 04:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2011-Dec-14 04:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2011-Dec-14 04:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2011-Dec-14 04:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2011-Dec-14 04:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2011-Dec-14 04:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2011-Dec-14 04:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2011-Dec-14 04:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2011-Dec-14 04:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2011-Dec-14 04:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2011-Dec-14 04:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2011-Dec-14 04:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-14 04:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2011-Dec-14 04:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2011-Dec-14 04:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2011-Dec-14 04:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2011-Dec-14 04:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 04:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-14 04:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-14 04:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-14 04:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 04:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 04:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 04:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 04:34:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-14 04:34:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.096 1.005 1.125 1.104 2011-Dec-14 04:34:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.095 0.960 0.999 1.069 2011-Dec-14 04:34:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 1.042 0.908 1.069 2011-Dec-14 04:34:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.076 0.022 0.936 0.022 2011-Dec-14 04:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 04:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 04:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-14 04:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 04:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 04:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2011-Dec-14 04:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-14 04:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-14 04:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2011-Dec-14 04:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-14 04:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2011-Dec-14 04:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2011-Dec-14 04:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-14 04:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-14 04:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-14 04:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2011-Dec-14 04:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2011-Dec-14 04:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 04:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-14 04:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-14 04:35:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-14 04:35:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 1.010 1.125 1.105 2011-Dec-14 04:35:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.096 0.961 0.997 1.065 2011-Dec-14 04:35:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.783 1.040 0.906 1.066 2011-Dec-14 04:35:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.073 0.020 0.933 0.020 2011-Dec-14 04:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-14 04:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-14 04:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-14 04:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-14 04:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 04:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2011-Dec-14 04:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2011-Dec-14 04:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2011-Dec-14 04:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2011-Dec-14 04:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 04:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 04:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 04:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 04:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 04:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 04:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 04:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 04:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2011-Dec-14 04:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 04:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-14 04:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-14 04:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-14 04:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 04:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2011-Dec-14 04:36:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-14 04:36:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.093 1.004 1.124 1.105 2011-Dec-14 04:36:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 0.958 0.993 1.061 2011-Dec-14 04:36:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.778 1.037 0.905 1.068 2011-Dec-14 04:36:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.021 0.930 0.021 2011-Dec-14 04:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2011-Dec-14 04:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2011-Dec-14 04:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2011-Dec-14 04:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2011-Dec-14 04:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2011-Dec-14 04:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2011-Dec-14 04:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2011-Dec-14 04:36:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 04:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2011-Dec-14 04:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2011-Dec-14 04:36:39 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-14 04:36:39 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-14 04:36:39 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-14 04:36:39 LOG5 end_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2011-Dec-14 04:36:39 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-14 04:36:39 LOG5 end_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2011-Dec-14 04:36:39 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-14 04:36:39 LOG5 finish_task: Level: (2) ID = <10065> Status = 0 0 0 0 ok 2011-Dec-14 04:36:39 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-14 04:36:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-14 04:36:39 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-14 04:36:39 LOG5 end_task: Level: (2) ID = <10065> Status = 0 0 0 0 ok 2011-Dec-14 04:36:39 COMMAND run_command_line: EXECUTING command 20: 'ENDIF' 2011-Dec-14 04:36:39 COMMAND run_command_line: EXECUTING command 23: 'IF LSTSLEW(AGES3193_p3_139) < 094340 THEN' 2011-Dec-14 04:36:39 LOG3 is_if_valid: Current source data: up 236.8 3.7 UP - - 96 1.8 2011-Dec-14 04:36:39 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_139) < 094340 2011-Dec-14 04:36:39 INFO5 is_if_valid: Condition parsed as: 9.7017379999999989 < 9.7277777777777779 2011-Dec-14 04:36:39 COMMAND run_command_line: EXECUTING command 24: 'FIXEDDRIFT az=229.02 alfaangle=-26.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_139 ra=95300.00 dec=202600.00' 2011-Dec-14 04:36:39 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-14 04:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2011-Dec-14 04:36:40 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-14 04:36:40 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 229.02 -26.3 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_139 95300.00 202600.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-14 04:36:40 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-14 04:36:40 LOG5 begin_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2011-Dec-14 04:36:40 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_137' 2011-Dec-14 04:36:40 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-14 04:36:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_139} 2011-Dec-14 04:36:40 INFO3 fixed_driftmap: Sending telescope to Az = 229.02 and ZA = 3.10 2011-Dec-14 04:36:40 LOG3 track_source: Calling 'track_source AGES3193_p3_139 229.02 3.1046438598 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-14 04:36:40 START begin_task: Starting task 'sending tracking commands' 2011-Dec-14 04:36:40 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2011-Dec-14 04:36:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_139} INFO {Slewing to source 'AGES3193_p3_139' ...} 2011-Dec-14 04:36:40 INFO1 track_source: Starting to track AGES3193_p3_139 2011-Dec-14 04:36:40 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_139" 2011-Dec-14 04:36:40 LOG3 vw_send: To DATATAKING: set ra 229.02 2011-Dec-14 04:36:40 LOG3 vw_send: To DATATAKING: set dec 3.1046438598 2011-Dec-14 04:36:40 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-14 04:36:40 LOG3 vw_send: To DATATAKING: pnt tr 229.02 3.1046438598 -CF 2011-Dec-14 04:36:40 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 04:36:40 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-14 04:36:40 LOG5 finish_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2011-Dec-14 04:36:40 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-14 04:36:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 04:36:40 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-14 04:36:40 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2011-Dec-14 04:36:40 START begin_task: Starting task 'rotate ALFA to -26.3 degrees' 2011-Dec-14 04:36:40 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2011-Dec-14 04:36:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -26.3 degrees ...} 2011-Dec-14 04:36:40 INFO2 rotate_alfa: ALFA commanded to -26.3 degrees 2011-Dec-14 04:36:40 LOG3 sock_errsend: To ALFAMOTOR: POSITION -26.3 REPLY 2011-Dec-14 04:36:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-14 04:36:40 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-14 04:36:40 LOG5 begin_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2011-Dec-14 04:36:40 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_139" 2011-Dec-14 04:36:40 LOG4 got_cormsg: From DATATAKING: set ra 229.02 2011-Dec-14 04:36:40 LOG4 got_cormsg: From DATATAKING: set dec 3.1046438598 2011-Dec-14 04:36:40 LOG4 got_cormsg: From DATATAKING: vw% 229.02 2011-Dec-14 04:36:40 LOG4 got_cormsg: From DATATAKING: vw% 3.1046438598 2011-Dec-14 04:36:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 04:36:40 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-14 04:36:40 LOG4 got_cormsg: From DATATAKING: pnt tr 229.02 3.1046438598 -CF 2011-Dec-14 04:36:40 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 04:36:40 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-14 04:36:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 04:36:58 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-14 04:36:58 INFO3 alfa_motor: ALFA rotator in-position -26.30 degrees 2011-Dec-14 04:36:58 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-14 04:36:58 LOG5 end_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2011-Dec-14 04:36:58 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-14 04:36:58 STOP finish_task: Finishing task 'rotate ALFA to -26.3 degrees' 2011-Dec-14 04:36:58 LOG5 finish_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2011-Dec-14 04:36:58 INFO2 finish_task: DONE finished configuration: rotating ALFA to -26.3 degrees 2011-Dec-14 04:36:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 04:36:58 STOP end_task: Finishing task 'rotate ALFA to -26.3 degrees' with status 'OK' 2011-Dec-14 04:36:58 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2011-Dec-14 04:36:58 START begin_task: Starting task 'waiting on telescope' 2011-Dec-14 04:36:58 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2011-Dec-14 04:36:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-14 04:36:58 LOG3 waittrk: Start waittrk 5 2011-Dec-14 04:36:58 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-14 04:36:58 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2011-Dec-14 04:37:03 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-14 04:37:03 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2011-Dec-14 04:37:03 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-14 04:37:03 LOG5 begin_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2011-Dec-14 04:38:51 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-14 04:38:51 LOG5 end_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2011-Dec-14 04:38:51 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-14 04:38:51 INFO2 waittrk: Now tracking AGES3193_p3_139 2011-Dec-14 04:38:51 LOG4 waittrk: Current telescope position: Az = 228.21 ZA = 3.11 2011-Dec-14 04:38:51 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-14 04:38:51 LOG5 finish_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2011-Dec-14 04:38:51 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-14 04:38:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 04:38:51 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-14 04:38:51 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2011-Dec-14 04:38:51 START begin_task: Starting task 'selecting calibration type' 2011-Dec-14 04:38:51 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2011-Dec-14 04:38:51 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-14 04:38:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-14 04:38:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 04:38:51 START begin_task: Starting task 'waiting on setcal' 2011-Dec-14 04:38:51 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2011-Dec-14 04:38:51 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-14 04:38:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 04:38:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 04:38:52 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-14 04:38:52 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-14 04:38:52 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2011-Dec-14 04:38:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-14 04:38:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-14 04:38:52 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-14 04:38:52 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-14 04:38:52 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2011-Dec-14 04:38:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 04:38:52 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-14 04:38:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-14 04:38:52 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2011-Dec-14 04:38:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-14 04:38:52 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-14 04:38:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-14 04:38:52 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-14 04:38:52 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-14 04:38:52 LOG5 begin_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2011-Dec-14 04:38:52 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-14 04:38:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-14 04:38:52 LOG5 end_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2011-Dec-14 04:38:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-14 04:38:52 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-14 04:38:52 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-14 04:38:52 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2011-Dec-14 04:38:52 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Dec-14 04:38:52 INFO2 astwait: Waiting for 9 seconds from 08:38:52 to 08:39:01 UTC ... 2011-Dec-14 04:38:52 LOG4 send_obs_status: To obs_status: <1> TASKTIME 9 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-14 04:38:52 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Dec-14 04:38:52 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2011-Dec-14 04:39:01 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Dec-14 04:39:01 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2011-Dec-14 04:39:01 INFO3 astwait: Finished waiting 2011-Dec-14 04:39:01 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-14 04:39:01 LOG5 dopset_later: Calling 'dopset_later 60.779637400151081' 2011-Dec-14 04:39:01 INFO3 dopset_later: Setting Doppler correction for 04:40:01 (60.8 seconds from now) 2011-Dec-14 04:39:01 LOG5 antvel: Calling 'antvel 229.020000 3.104644 F Heliocentric 60.779637400151081' 2011-Dec-14 04:39:01 LOG2 antvel: Transforming current Az = 229.02 ZA = 3.10 to apparent RA = 09:53:41.4 Dec = +20:22:23.3 2011-Dec-14 04:39:01 LOG2 antvel: Parameters to Doppler: Heliocentric 31201 2011 348 0.0 2011-Dec-14 04:39:01 INFO5 antvel: Computed antenna velocity: -26.33515 km/s 2011-Dec-14 04:39:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-26.3351459089 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-14 04:39:01 INFO4 dopset_gen: New sky frequencies: 1381.364774 1381.364774 1381.364774 1381.364774 1381.364774 1381.364774 1381.364774 1381.364774 1381.364774 2011-Dec-14 04:39:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.364774 sky0=1381.364774 sky1=1381.364774 sky2=1381.364774 sky3=1381.364774 sky4=1381.364774 sky5=1381.364774 sky6=1381.364774 sky7=1381.364774 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-14 04:39:01 LOG2 dopset_gen: Result from 'sky2syn': 1631.364774 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-14 04:39:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631364774.0} 2011-Dec-14 04:39:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 04:39:01 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-14 04:39:01 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-14 04:39:01 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.7 Dec = +20:25:46.7 2011-Dec-14 04:39:01 LOG3 track_source: Calling 'track_source AGES3193_p3_139 095203.7 202546.7 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-14 04:39:01 START begin_task: Starting task 'sending tracking commands' 2011-Dec-14 04:39:01 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2011-Dec-14 04:39:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_139} INFO {Slewing to source 'AGES3193_p3_139' ...} 2011-Dec-14 04:39:01 INFO1 track_source: Starting to track AGES3193_p3_139 2011-Dec-14 04:39:01 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_139" 2011-Dec-14 04:39:01 LOG3 vw_send: To DATATAKING: set ra 095203.7 2011-Dec-14 04:39:01 LOG3 vw_send: To DATATAKING: set dec 202546.7 2011-Dec-14 04:39:01 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-14 04:39:01 LOG3 vw_send: To DATATAKING: pnt tr 095203.7 202546.7 -CJ 2011-Dec-14 04:39:01 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 04:39:01 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-14 04:39:01 LOG5 finish_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2011-Dec-14 04:39:01 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-14 04:39:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 04:39:01 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-14 04:39:01 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2011-Dec-14 04:39:01 START begin_task: Starting task 'waiting on telescope' 2011-Dec-14 04:39:01 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2011-Dec-14 04:39:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-14 04:39:01 LOG3 waittrk: Start waittrk 5 2011-Dec-14 04:39:01 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-14 04:39:01 LOG5 begin_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2011-Dec-14 04:39:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631364774.0} 2011-Dec-14 04:39:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 04:39:01 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_139" 2011-Dec-14 04:39:01 LOG4 got_cormsg: From DATATAKING: set ra 095203.7 2011-Dec-14 04:39:01 LOG4 got_cormsg: From DATATAKING: set dec 202546.7 2011-Dec-14 04:39:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 04:39:01 LOG4 got_cormsg: From DATATAKING: vw% vw% 095203.7 2011-Dec-14 04:39:01 LOG4 got_cormsg: From DATATAKING: vw% 202546.7 2011-Dec-14 04:39:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 04:39:01 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-14 04:39:01 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.7 202546.7 -CJ 2011-Dec-14 04:39:01 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 04:39:01 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-14 04:39:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 04:39:06 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-14 04:39:06 LOG5 end_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2011-Dec-14 04:39:06 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-14 04:39:06 LOG5 begin_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2011-Dec-14 04:39:13 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-14 04:39:13 LOG5 end_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2011-Dec-14 04:39:13 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-14 04:39:13 INFO2 waittrk: Now tracking AGES3193_p3_139 2011-Dec-14 04:39:13 LOG4 waittrk: Current telescope position: Az = 227.82 ZA = 3.07 2011-Dec-14 04:39:13 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-14 04:39:13 LOG5 finish_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2011-Dec-14 04:39:13 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-14 04:39:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 04:39:13 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-14 04:39:13 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2011-Dec-14 04:39:13 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-14 04:39:13 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2011-Dec-14 04:39:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-14 04:39:13 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-14 04:39:13 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-14 04:39:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-14 04:39:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 04:39:13 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-14 04:39:13 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2011-Dec-14 04:39:14 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-14 04:39:14 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 04:39:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 04:39:16 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-14 04:39:16 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-14 04:39:16 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2011-Dec-14 04:39:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-14 04:39:16 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-14 04:39:16 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2011-Dec-14 04:39:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-14 04:39:16 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-14 04:39:16 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-14 04:39:16 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-14 04:39:16 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-14 04:39:16 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-14 04:39:16 LOG5 begin_task: Level: (5) ID = <10126> Status = 0 0 0 0 ok 2011-Dec-14 04:39:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-14 04:39:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 04:39:17 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 7 5 dB 2011-Dec-14 04:39:17 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 2 3 dB 2011-Dec-14 04:39:17 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 4 dB --- beam 3: 2 2 dB 2011-Dec-14 04:39:17 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2011-Dec-14 04:39:17 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-14 04:39:17 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-14 04:39:17 LOG5 end_task: Level: (5) ID = <10126> Status = 0 0 0 0 ok 2011-Dec-14 04:39:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.106 1.015 ALFA beam 1: 1.103 1.120 2011-Dec-14 04:39:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.095 0.965 ALFA beam 3: 1.014 1.081 2011-Dec-14 04:39:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.787 1.038 ALFA beam 5: 1.102 1.027 2011-Dec-14 04:39:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.034 0.014 ALFA beam 7: 0.899 0.014 2011-Dec-14 04:39:17 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-14 04:39:17 LOG5 finish_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2011-Dec-14 04:39:17 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-14 04:39:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 04:39:17 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-14 04:39:17 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2011-Dec-14 04:39:17 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-14 04:39:17 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2011-Dec-14 04:39:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-14 04:39:17 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-14 04:39:17 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-14 04:39:17 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-14 04:39:17 LOG5 begin_task: Level: (5) ID = <10128> Status = 0 0 0 0 ok 2011-Dec-14 04:39:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-14 04:39:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.106 1.015 1.103 1.120 2011-Dec-14 04:39:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.095 0.965 1.014 1.081 2011-Dec-14 04:39:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.787 1.038 1.102 1.027 2011-Dec-14 04:39:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.034 0.014 0.899 0.014 2011-Dec-14 04:39:22 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.2 27.4 B 29.2 29.3 mn:A 0.1 0.1 B -0.3 -0.3 gn: 11 11 2011-Dec-14 04:39:22 INFO3 from_mock: From MOCK: b0s1g0 rms:A 31.4 30.0 B 30.7 32.5 mn:A 0.2 -0.4 B -0.5 0.2 gn: 12 12 2011-Dec-14 04:39:22 INFO3 from_mock: From MOCK: b1s0g0 rms:A 29.6 27.7 B 32.1 28.1 mn:A 0.7 0.6 B 0.1 -0.0 gn: 7 11 2011-Dec-14 04:39:23 INFO3 from_mock: From MOCK: b1s1g0 rms:A 32.7 30.1 B 30.6 30.6 mn:A -0.2 -0.3 B 0.6 0.2 gn: 9 10 2011-Dec-14 04:39:23 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.4 30.4 B 31.3 32.7 mn:A -0.1 -0.4 B 0.4 0.0 gn: 11 12 2011-Dec-14 04:39:23 INFO3 from_mock: From MOCK: b2s1g0 rms:A 28.6 28.9 B 32.0 29.7 mn:A 0.3 -0.2 B 0.0 0.2 gn: 11 12 2011-Dec-14 04:39:23 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.6 31.4 B 30.5 27.2 mn:A 0.4 -0.3 B 0.0 -0.3 gn: 13 12 2011-Dec-14 04:39:23 INFO3 from_mock: From MOCK: b3s1g0 rms:A 29.4 28.7 B 28.8 30.0 mn:A -0.3 0.3 B 0.1 0.2 gn: 12 12 2011-Dec-14 04:39:23 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.4 28.5 B 30.5 30.6 mn:A -0.3 -0.3 B -0.4 0.1 gn: 13 12 2011-Dec-14 04:39:23 INFO3 from_mock: From MOCK: b4s1g0 rms:A 31.4 28.4 B 29.2 28.1 mn:A -0.0 0.1 B -0.4 0.2 gn: 16 13 2011-Dec-14 04:39:23 INFO3 from_mock: From MOCK: b5s0g0 rms:A 31.5 30.3 B 29.3 29.3 mn:A 0.5 0.4 B 0.1 0.5 gn: 13 11 2011-Dec-14 04:39:23 INFO3 from_mock: From MOCK: b5s1g0 rms:A 31.6 31.4 B 29.7 29.4 mn:A -0.4 0.3 B 0.0 0.2 gn: 13 11 2011-Dec-14 04:39:23 INFO3 from_mock: From MOCK: b6s0g0 rms:A 31.6 28.9 B 14.1 14.6 mn:A -0.5 0.3 B 0.3 -0.5 gn: 13 31 2011-Dec-14 04:39:23 INFO3 from_mock: From MOCK: b6s1g0 rms:A 32.1 29.1 B 11.2 10.8 mn:A 0.6 0.5 B 0.1 0.2 gn: 14 31 2011-Dec-14 04:39:23 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-14 04:39:23 LOG5 end_task: Level: (5) ID = <10128> Status = 0 0 0 0 ok 2011-Dec-14 04:39:23 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-14 04:39:23 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-14 04:39:23 LOG5 finish_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2011-Dec-14 04:39:23 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-14 04:39:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 04:39:23 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-14 04:39:23 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2011-Dec-14 04:39:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-14 04:39:23 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-14 04:39:23 LOG5 finish_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2011-Dec-14 04:39:23 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-14 04:39:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 04:39:23 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-14 04:39:23 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2011-Dec-14 04:39:23 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 04:39:23 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 04:39:23 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 04:39:23 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 04:39:23 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-14 04:39:23 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-14 04:39:23 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2011-Dec-14 04:39:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-14 04:39:23 START begin_task: Starting task 'selecting calibration type' 2011-Dec-14 04:39:23 LOG5 begin_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2011-Dec-14 04:39:23 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-14 04:39:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-14 04:39:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 04:39:23 START begin_task: Starting task 'waiting on setcal' 2011-Dec-14 04:39:23 LOG5 begin_task: Level: (5) ID = <10131> Status = 0 0 0 0 ok 2011-Dec-14 04:39:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Ellioty Gonzalez' 2011-Dec-14 04:39:23 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-14 04:39:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 04:39:23 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 04:39:23 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-14 04:39:23 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-14 04:39:23 LOG5 end_task: Level: (5) ID = <10131> Status = 0 0 0 0 ok 2011-Dec-14 04:39:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-14 04:39:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-14 04:39:23 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-14 04:39:23 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-14 04:39:23 LOG5 begin_task: Level: (5) ID = <10132> Status = 0 0 0 0 ok 2011-Dec-14 04:39:23 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 04:39:23 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-14 04:39:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-14 04:39:23 LOG5 end_task: Level: (5) ID = <10132> Status = 0 0 0 0 ok 2011-Dec-14 04:39:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-14 04:39:23 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-14 04:39:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-14 04:39:23 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-14 04:39:23 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-14 04:39:23 LOG5 begin_task: Level: (5) ID = <10133> Status = 0 0 0 0 ok 2011-Dec-14 04:39:24 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-14 04:39:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-14 04:39:24 LOG5 end_task: Level: (5) ID = <10133> Status = 0 0 0 0 ok 2011-Dec-14 04:39:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-14 04:39:24 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-14 04:39:24 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-14 04:39:24 LOG5 end_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2011-Dec-14 04:39:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-14 04:39:24 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-14 04:39:24 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-14 04:39:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-14 04:39:24 LOG5 begin_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2011-Dec-14 04:39:24 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-14 04:39:24 NOTE WAPPDATA-new_file: New FITS file: wapp.20111214.a2048.0002.fits 2011-Dec-14 04:39:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-14 04:39:24 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111214.a2048.0002.fits} 2011-Dec-14 04:39:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-14 04:39:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-14 04:39:24 LOG5 end_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2011-Dec-14 04:39:24 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-14 04:39:24 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-14 04:39:24 LOG5 begin_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2011-Dec-14 04:39:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-14 04:39:24 LOG5 log_alfabeam: Parameters: 9.8676944444444441 20.429638888888892 9.717696 2011.9533032613381 -26.300003 2011-Dec-14 04:39:24 LOG4 log_alfabeam: ALFABEAM 0 9.867694444444426 20.429638888888881 2011-Dec-14 04:39:24 LOG4 log_alfabeam: ALFABEAM 1 9.867966541181254 20.333939236731528 2011-Dec-14 04:39:24 LOG4 log_alfabeam: ALFABEAM 2 9.874060703287078 20.397351679978676 2011-Dec-14 04:39:24 LOG4 log_alfabeam: ALFABEAM 3 9.873683197696437 20.495085577047220 2011-Dec-14 04:39:24 LOG4 log_alfabeam: ALFABEAM 4 9.867181976213626 20.526312378442519 2011-Dec-14 04:39:24 LOG4 log_alfabeam: ALFABEAM 5 9.861326669173113 20.458511259231187 2011-Dec-14 04:39:24 LOG4 log_alfabeam: ALFABEAM 6 9.861729473166278 20.363828659915050 2011-Dec-14 04:39:24 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-14 04:39:24 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-14 04:39:24 LOG3 take_mock_data: PSET configuration: obsnm=Ellioty Gonzalez 2011-Dec-14 04:39:24 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_139 2011-Dec-14 04:39:24 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-14 04:39:24 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-14 04:39:24 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-14 04:39:24 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-14 04:39:24 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-14 04:39:24 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-14 04:39:24 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-14 04:39:24 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-14 04:39:24 LOG3 take_mock_data: PSET configuration: patternid=134800006 2011-Dec-14 04:39:24 LOG3 take_mock_data: PSET configuration: scanid=134800007 2011-Dec-14 04:39:24 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-14 04:39:24 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-14 04:39:24 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-14 04:39:24 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456364774.0 2011-Dec-14 04:39:24 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306364774.0 2011-Dec-14 04:39:24 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-14 04:39:24 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-14 04:39:24 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Ellioty Gonzalez:object=AGES3193_p3_139:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=134800006:scanid=134800007:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456364774.0:topobfreqhz=1306364774.0:filetype=1 2011-Dec-14 04:39:24 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-14 04:39:24 LOG5 begin_task: Level: (5) ID = <10136> Status = 0 0 0 0 ok 2011-Dec-14 04:39:24 LOG4 from_mock: From MOCK: psetok 2011-Dec-14 04:39:24 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-14 04:39:24 LOG5 end_task: Level: (5) ID = <10136> Status = 0 0 0 0 ok 2011-Dec-14 04:39:24 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-14 04:39:24 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-14 04:39:24 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-14 04:39:24 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-14 04:39:24 LOG5 begin_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2011-Dec-14 04:39:24 LOG4 from_mock: From MOCK: starok 2011-Dec-14 04:39:24 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-14 04:39:24 LOG5 end_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2011-Dec-14 04:39:24 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-14 04:39:24 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134800007 2011-Dec-14 04:39:25 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-14 04:39:25 LOG5 begin_task: Level: (5) ID = <10138> Status = 0 0 0 0 ok 2011-Dec-14 04:39:25 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-14 04:39:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 04:39:25 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-14 04:39:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-14 04:39:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31166.00 2011-Dec-14 04:39:26 INFO2 got_mock_message: Mock spectrometer start file number is 00600 2011-Dec-14 04:39:26 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-14 04:39:26 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-14 04:39:26 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-14 04:39:26 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-14 04:39:26 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-14 04:39:26 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-14 04:39:26 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-14 04:39:26 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-14 04:39:26 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-14 04:39:26 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-14 04:39:26 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-14 04:39:26 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-14 04:39:26 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 04:39:26 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 04:39:26 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 04:39:26 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 04:39:26 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 04:39:26 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 04:39:26 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 04:39:29 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:39:29.01 2011-Dec-14 04:39:29 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323851969.01 Wed Dec 14 04:39:29 2011 2011-Dec-14 04:39:29 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-14 04:39:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.364774 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 04:39:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.364774 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 04:39:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.364774 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 04:39:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.364774 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 04:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.516 (still bad) 2011-Dec-14 04:39:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.364774 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 04:39:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.364774 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 04:39:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.364774 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 04:39:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.364774 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 04:39:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.364774 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 04:39:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 04:39:34 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-14 04:39:35 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-14 04:39:35 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-14 04:39:35 LOG5 end_task: Level: (5) ID = <10138> Status = 0 0 0 0 ok 2011-Dec-14 04:39:35 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-14 04:39:35 LOG5 end_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2011-Dec-14 04:39:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-14 04:39:35 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-14 04:39:35 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-14 04:39:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-14 04:39:35 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2011-Dec-14 04:39:35 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-14 04:39:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-14 04:39:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-14 04:39:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-14 04:39:35 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2011-Dec-14 04:39:35 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-14 04:39:35 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-14 04:39:35 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2011-Dec-14 04:39:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-14 04:39:35 LOG5 log_alfabeam: Parameters: 9.8676944444444441 20.429638888888892 9.720760 2011.9533036099069 -26.300003 2011-Dec-14 04:39:35 LOG4 log_alfabeam: ALFABEAM 0 9.867694444444430 20.429638888888885 2011-Dec-14 04:39:35 LOG4 log_alfabeam: ALFABEAM 1 9.868031100467343 20.333986181384322 2011-Dec-14 04:39:35 LOG4 log_alfabeam: ALFABEAM 2 9.874082636324895 20.398201121837864 2011-Dec-14 04:39:35 LOG4 log_alfabeam: ALFABEAM 3 9.873637953457179 20.495895536438951 2011-Dec-14 04:39:35 LOG4 log_alfabeam: ALFABEAM 4 9.867114090665202 20.526242793846126 2011-Dec-14 04:39:35 LOG4 log_alfabeam: ALFABEAM 5 9.861307150829294 20.457625647672977 2011-Dec-14 04:39:35 LOG4 log_alfabeam: ALFABEAM 6 9.861775162007843 20.363018566398658 2011-Dec-14 04:39:35 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-14 04:39:35 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-14 04:39:35 LOG3 take_mock_data: PSET configuration: obsnm=Ellioty Gonzalez 2011-Dec-14 04:39:35 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_139 2011-Dec-14 04:39:35 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-14 04:39:35 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-14 04:39:35 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-14 04:39:35 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-14 04:39:35 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-14 04:39:35 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-14 04:39:35 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-14 04:39:35 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-14 04:39:35 LOG3 take_mock_data: PSET configuration: patternid=134800006 2011-Dec-14 04:39:35 LOG3 take_mock_data: PSET configuration: scanid=134800008 2011-Dec-14 04:39:35 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-14 04:39:35 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-14 04:39:35 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-14 04:39:35 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456364774.0 2011-Dec-14 04:39:35 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306364774.0 2011-Dec-14 04:39:35 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-14 04:39:35 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-14 04:39:35 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Ellioty Gonzalez:object=AGES3193_p3_139:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=134800006:scanid=134800008:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456364774.0:topobfreqhz=1306364774.0:filetype=1 2011-Dec-14 04:39:35 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-14 04:39:35 LOG5 begin_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2011-Dec-14 04:39:35 LOG4 from_mock: From MOCK: psetok 2011-Dec-14 04:39:35 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-14 04:39:35 LOG5 end_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2011-Dec-14 04:39:35 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-14 04:39:35 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-14 04:39:35 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-14 04:39:35 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-14 04:39:35 LOG5 begin_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2011-Dec-14 04:39:35 LOG4 from_mock: From MOCK: starok 2011-Dec-14 04:39:35 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-14 04:39:35 LOG5 end_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2011-Dec-14 04:39:35 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-14 04:39:35 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134800008 2011-Dec-14 04:39:35 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-14 04:39:35 LOG5 begin_task: Level: (5) ID = <10143> Status = 0 0 0 0 ok 2011-Dec-14 04:39:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 04:39:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-14 04:39:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31176.00 2011-Dec-14 04:39:36 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-14 04:39:36 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-14 04:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.516 (still bad) 2011-Dec-14 04:39:38 INFO2 got_mock_message: Mock spectrometer start file number is 00700 2011-Dec-14 04:39:38 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-14 04:39:38 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-14 04:39:38 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-14 04:39:38 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-14 04:39:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-14 04:39:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-14 04:39:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-14 04:39:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-14 04:39:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-14 04:39:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-14 04:39:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-14 04:39:38 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-14 04:39:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 04:39:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 04:39:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 04:39:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 04:39:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 04:39:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 04:39:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 04:39:41 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:39:41.02 2011-Dec-14 04:39:41 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323851981.02 Wed Dec 14 04:39:41 2011 2011-Dec-14 04:39:41 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-14 04:39:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.364774 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 04:39:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.364774 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 04:39:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.364774 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 04:39:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.364774 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 04:39:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.364774 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 04:39:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.364774 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 04:39:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.364774 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 04:39:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.364774 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 04:39:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.364774 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 04:39:41 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-14 04:39:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 04:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2011-Dec-14 04:39:46 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-14 04:39:47 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-14 04:39:47 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-14 04:39:47 LOG5 end_task: Level: (5) ID = <10143> Status = 0 0 0 0 ok 2011-Dec-14 04:39:47 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-14 04:39:47 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2011-Dec-14 04:39:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-14 04:39:47 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-14 04:39:47 LOG5 finish_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2011-Dec-14 04:39:47 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-14 04:39:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 04:39:47 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-14 04:39:47 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2011-Dec-14 04:39:47 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-14 04:39:47 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 229.02 and ZA = 3.10 2011-Dec-14 04:39:47 LOG3 track_source: Calling 'track_source AGES3193_p3_139 229.02 3.1046438598 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-14 04:39:47 START begin_task: Starting task 'sending tracking commands' 2011-Dec-14 04:39:47 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2011-Dec-14 04:39:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_139} INFO {Slewing to source 'AGES3193_p3_139' ...} 2011-Dec-14 04:39:47 INFO1 track_source: Starting to track AGES3193_p3_139 2011-Dec-14 04:39:47 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_139" 2011-Dec-14 04:39:47 LOG3 vw_send: To DATATAKING: set ra 229.02 2011-Dec-14 04:39:47 LOG3 vw_send: To DATATAKING: set dec 3.1046438598 2011-Dec-14 04:39:47 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-14 04:39:47 LOG3 vw_send: To DATATAKING: pnt tr 229.02 3.1046438598 -CF 2011-Dec-14 04:39:47 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 04:39:47 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-14 04:39:47 LOG5 finish_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2011-Dec-14 04:39:47 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-14 04:39:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 04:39:47 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-14 04:39:47 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2011-Dec-14 04:39:47 LOG1 fixed_driftmap: Parameters: HA = -00:09:59.9 Start = 09:43:41.6 LST = 09:43:26.8 diff = 14.8 secs 2011-Dec-14 04:39:47 INFO2 fixed_driftmap: Waiting 12.8 seconds for RA 9:53:42 2011-Dec-14 04:39:47 INFO2 lstwait: Waiting for 12.8 secs from LST 09:43:27 to LST 09:43:40 ... 2011-Dec-14 04:39:47 LOG4 send_obs_status: To obs_status: <1> TASKTIME 12.784242814872497 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-14 04:39:47 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-14 04:39:47 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2011-Dec-14 04:39:47 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_139" 2011-Dec-14 04:39:47 LOG4 got_cormsg: From DATATAKING: set ra 229.02 2011-Dec-14 04:39:47 LOG4 got_cormsg: From DATATAKING: set dec 3.1046438598 2011-Dec-14 04:39:47 LOG4 got_cormsg: From DATATAKING: vw% 229.02 2011-Dec-14 04:39:47 LOG4 got_cormsg: From DATATAKING: vw% 3.1046438598 2011-Dec-14 04:39:47 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 04:39:47 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-14 04:39:47 LOG4 got_cormsg: From DATATAKING: pnt tr 229.02 3.1046438598 -CF 2011-Dec-14 04:39:47 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 04:39:47 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-14 04:39:47 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 04:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2011-Dec-14 04:40:00 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-14 04:40:00 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2011-Dec-14 04:40:00 LOG4 lstwait: Finished waiting 1.22 seconds late 2011-Dec-14 04:40:00 INFO3 lstwait: Finished waiting 2011-Dec-14 04:40:00 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-14 04:40:00 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-14 04:40:00 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-14 04:40:00 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-14 04:40:00 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-14 04:40:00 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-14 04:40:00 LOG5 begin_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2011-Dec-14 04:40:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-14 04:40:00 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-14 04:40:00 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-14 04:40:00 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-14 04:40:00 LOG3 take_mock_data: PSET configuration: obsnm=Ellioty Gonzalez 2011-Dec-14 04:40:00 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_139 2011-Dec-14 04:40:00 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-14 04:40:00 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-14 04:40:00 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-14 04:40:00 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-14 04:40:00 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-14 04:40:00 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-14 04:40:00 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-14 04:40:00 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-14 04:40:00 LOG3 take_mock_data: PSET configuration: patternid=134800009 2011-Dec-14 04:40:00 LOG3 take_mock_data: PSET configuration: scanid=134800009 2011-Dec-14 04:40:00 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-14 04:40:00 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-14 04:40:00 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-14 04:40:00 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456364774.0 2011-Dec-14 04:40:00 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306364774.0 2011-Dec-14 04:40:00 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-14 04:40:00 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-14 04:40:00 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Ellioty Gonzalez:object=AGES3193_p3_139:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=134800009:scanid=134800009:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456364774.0:topobfreqhz=1306364774.0:filetype=1 2011-Dec-14 04:40:00 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-14 04:40:00 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2011-Dec-14 04:40:00 LOG4 from_mock: From MOCK: psetok 2011-Dec-14 04:40:00 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-14 04:40:00 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2011-Dec-14 04:40:00 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-14 04:40:00 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-14 04:40:00 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-14 04:40:00 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-14 04:40:00 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2011-Dec-14 04:40:00 LOG4 from_mock: From MOCK: starok 2011-Dec-14 04:40:00 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-14 04:40:00 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2011-Dec-14 04:40:00 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-14 04:40:00 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 134800009 2011-Dec-14 04:40:01 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-14 04:40:01 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2011-Dec-14 04:40:01 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-14 04:40:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 04:40:01 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-14 04:40:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-14 04:40:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31202.00 2011-Dec-14 04:40:02 INFO2 got_mock_message: Mock spectrometer start file number is 00800 2011-Dec-14 04:40:02 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-14 04:40:02 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2011-Dec-14 04:40:02 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-14 04:40:02 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-14 04:40:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-14 04:40:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-14 04:40:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-14 04:40:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-14 04:40:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-14 04:40:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-14 04:40:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-14 04:40:02 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-14 04:40:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 04:40:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 04:40:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 04:40:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 04:40:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 04:40:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 04:40:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 04:40:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.364774 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 04:40:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.364774 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 04:40:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.364774 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 04:40:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.364774 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 04:40:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.364774 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 04:40:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.364774 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 04:40:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.364774 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 04:40:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.364774 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 04:40:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.364774 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 04:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2011-Dec-14 04:40:03 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2011-Dec-14 04:40:04 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2011-Dec-14 04:40:05 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:40:05.01 2011-Dec-14 04:40:05 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323852005.01 Wed Dec 14 04:40:05 2011 2011-Dec-14 04:40:05 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-14 04:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2011-Dec-14 04:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.101 (still bad) 2011-Dec-14 04:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.093 (still bad) 2011-Dec-14 04:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.094 (still bad) 2011-Dec-14 04:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.097 (still bad) 2011-Dec-14 04:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.097 (still bad) 2011-Dec-14 04:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.099 (still bad) 2011-Dec-14 04:40:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-14 04:40:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 0.995 1.084 1.100 2011-Dec-14 04:40:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.079 0.949 1.000 1.065 2011-Dec-14 04:40:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.780 1.023 1.106 1.029 2011-Dec-14 04:40:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.026 0.023 0.892 0.023 2011-Dec-14 04:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-14 04:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-14 04:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.095 (still bad) 2011-Dec-14 04:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.095 (still bad) 2011-Dec-14 04:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.095 (still bad) 2011-Dec-14 04:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.099 (still bad) 2011-Dec-14 04:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.093 (still bad) 2011-Dec-14 04:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.094 (still bad) 2011-Dec-14 04:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.095 (still bad) 2011-Dec-14 04:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.094 (still bad) 2011-Dec-14 04:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.094 (still bad) 2011-Dec-14 04:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.101 (still bad) 2011-Dec-14 04:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.094 (still bad) 2011-Dec-14 04:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.095 (still bad) 2011-Dec-14 04:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.097 (still bad) 2011-Dec-14 04:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-14 04:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-14 04:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2011-Dec-14 04:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.096 (still bad) 2011-Dec-14 04:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.097 (still bad) 2011-Dec-14 04:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.096 (still bad) 2011-Dec-14 04:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.095 (still bad) 2011-Dec-14 04:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.098 (still bad) 2011-Dec-14 04:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-14 04:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.095 (still bad) 2011-Dec-14 04:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.095 (still bad) 2011-Dec-14 04:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-14 04:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-14 04:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-14 04:41:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-14 04:41:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 0.990 1.082 1.098 2011-Dec-14 04:41:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.079 0.945 0.997 1.060 2011-Dec-14 04:41:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.783 1.024 1.087 1.011 2011-Dec-14 04:41:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.022 0.889 0.022 2011-Dec-14 04:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.096 (still bad) 2011-Dec-14 04:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.094 (still bad) 2011-Dec-14 04:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.093 (still bad) 2011-Dec-14 04:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.094 (still bad) 2011-Dec-14 04:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.096 (still bad) 2011-Dec-14 04:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.097 (still bad) 2011-Dec-14 04:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.094 (still bad) 2011-Dec-14 04:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.096 (still bad) 2011-Dec-14 04:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.098 (still bad) 2011-Dec-14 04:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.095 (still bad) 2011-Dec-14 04:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.098 (still bad) 2011-Dec-14 04:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.098 (still bad) 2011-Dec-14 04:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.097 (still bad) 2011-Dec-14 04:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.096 (still bad) 2011-Dec-14 04:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.097 (still bad) 2011-Dec-14 04:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.095 (still bad) 2011-Dec-14 04:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.098 (still bad) 2011-Dec-14 04:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2011-Dec-14 04:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2011-Dec-14 04:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.102 (still bad) 2011-Dec-14 04:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2011-Dec-14 04:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2011-Dec-14 04:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2011-Dec-14 04:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2011-Dec-14 04:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2011-Dec-14 04:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2011-Dec-14 04:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2011-Dec-14 04:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.098 (still bad) 2011-Dec-14 04:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.098 (still bad) 2011-Dec-14 04:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.098 (still bad) 2011-Dec-14 04:42:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-14 04:42:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 0.989 1.081 1.096 2011-Dec-14 04:42:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.079 0.950 0.995 1.059 2011-Dec-14 04:42:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.782 1.026 1.086 1.012 2011-Dec-14 04:42:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.025 0.889 0.026 2011-Dec-14 04:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.095 (still bad) 2011-Dec-14 04:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.095 (still bad) 2011-Dec-14 04:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.095 (still bad) 2011-Dec-14 04:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-14 04:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.095 (still bad) 2011-Dec-14 04:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-14 04:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-14 04:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.097 (still bad) 2011-Dec-14 04:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-14 04:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2011-Dec-14 04:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2011-Dec-14 04:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2011-Dec-14 04:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2011-Dec-14 04:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2011-Dec-14 04:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2011-Dec-14 04:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2011-Dec-14 04:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2011-Dec-14 04:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2011-Dec-14 04:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2011-Dec-14 04:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2011-Dec-14 04:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2011-Dec-14 04:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2011-Dec-14 04:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2011-Dec-14 04:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2011-Dec-14 04:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2011-Dec-14 04:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2011-Dec-14 04:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2011-Dec-14 04:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2011-Dec-14 04:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2011-Dec-14 04:43:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-14 04:43:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 0.984 1.082 1.095 2011-Dec-14 04:43:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 0.946 0.996 1.057 2011-Dec-14 04:43:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.780 1.024 1.083 1.009 2011-Dec-14 04:43:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.031 0.026 0.897 0.026 2011-Dec-14 04:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2011-Dec-14 04:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2011-Dec-14 04:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2011-Dec-14 04:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.097 (still bad) 2011-Dec-14 04:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.095 (still bad) 2011-Dec-14 04:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.096 (still bad) 2011-Dec-14 04:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.097 (still bad) 2011-Dec-14 04:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.095 (still bad) 2011-Dec-14 04:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.096 (still bad) 2011-Dec-14 04:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.094 (still bad) 2011-Dec-14 04:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.095 (still bad) 2011-Dec-14 04:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.095 (still bad) 2011-Dec-14 04:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.097 (still bad) 2011-Dec-14 04:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.095 (still bad) 2011-Dec-14 04:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.097 (still bad) 2011-Dec-14 04:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.098 (still bad) 2011-Dec-14 04:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.095 (still bad) 2011-Dec-14 04:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-14 04:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.098 (still bad) 2011-Dec-14 04:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.095 (still bad) 2011-Dec-14 04:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.097 (still bad) 2011-Dec-14 04:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2011-Dec-14 04:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2011-Dec-14 04:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2011-Dec-14 04:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2011-Dec-14 04:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2011-Dec-14 04:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2011-Dec-14 04:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2011-Dec-14 04:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2011-Dec-14 04:44:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-14 04:44:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 0.988 1.082 1.095 2011-Dec-14 04:44:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 0.948 0.999 1.062 2011-Dec-14 04:44:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.782 1.025 1.092 1.014 2011-Dec-14 04:44:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.026 0.891 0.026 2011-Dec-14 04:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2011-Dec-14 04:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2011-Dec-14 04:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2011-Dec-14 04:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2011-Dec-14 04:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2011-Dec-14 04:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2011-Dec-14 04:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2011-Dec-14 04:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2011-Dec-14 04:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2011-Dec-14 04:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.094 (still bad) 2011-Dec-14 04:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.092 (still bad) 2011-Dec-14 04:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.095 (still bad) 2011-Dec-14 04:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.094 (still bad) 2011-Dec-14 04:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.093 (still bad) 2011-Dec-14 04:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2011-Dec-14 04:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.093 (still bad) 2011-Dec-14 04:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.094 (still bad) 2011-Dec-14 04:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.095 (still bad) 2011-Dec-14 04:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.093 (still bad) 2011-Dec-14 04:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.093 (still bad) 2011-Dec-14 04:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2011-Dec-14 04:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.095 (still bad) 2011-Dec-14 04:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.093 (still bad) 2011-Dec-14 04:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.094 (still bad) 2011-Dec-14 04:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.093 (still bad) 2011-Dec-14 04:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.094 (still bad) 2011-Dec-14 04:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2011-Dec-14 04:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.095 (still bad) 2011-Dec-14 04:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.093 (still bad) 2011-Dec-14 04:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.094 (still bad) 2011-Dec-14 04:45:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-14 04:45:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.070 0.988 1.082 1.096 2011-Dec-14 04:45:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 0.951 0.997 1.058 2011-Dec-14 04:45:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.781 1.022 1.085 1.009 2011-Dec-14 04:45:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.021 0.889 0.021 2011-Dec-14 04:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.096 (still bad) 2011-Dec-14 04:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.100 (still bad) 2011-Dec-14 04:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2011-Dec-14 04:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.098 (still bad) 2011-Dec-14 04:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.098 (still bad) 2011-Dec-14 04:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.096 (still bad) 2011-Dec-14 04:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.097 (still bad) 2011-Dec-14 04:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2011-Dec-14 04:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.098 (still bad) 2011-Dec-14 04:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.095 (still bad) 2011-Dec-14 04:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.097 (still bad) 2011-Dec-14 04:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.095 (still bad) 2011-Dec-14 04:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.094 (still bad) 2011-Dec-14 04:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.098 (still bad) 2011-Dec-14 04:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.097 (still bad) 2011-Dec-14 04:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.097 (still bad) 2011-Dec-14 04:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.097 (still bad) 2011-Dec-14 04:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.094 (still bad) 2011-Dec-14 04:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.096 (still bad) 2011-Dec-14 04:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2011-Dec-14 04:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.094 (still bad) 2011-Dec-14 04:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.094 (still bad) 2011-Dec-14 04:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.096 (still bad) 2011-Dec-14 04:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.096 (still bad) 2011-Dec-14 04:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.096 (still bad) 2011-Dec-14 04:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.102 (still bad) 2011-Dec-14 04:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.094 (still bad) 2011-Dec-14 04:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.094 (still bad) 2011-Dec-14 04:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.096 (still bad) 2011-Dec-14 04:46:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-14 04:46:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 0.986 1.081 1.094 2011-Dec-14 04:46:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 0.946 0.997 1.058 2011-Dec-14 04:46:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.780 1.023 1.086 1.010 2011-Dec-14 04:46:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.022 0.890 0.022 2011-Dec-14 04:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.095 (still bad) 2011-Dec-14 04:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.102 (still bad) 2011-Dec-14 04:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.095 (still bad) 2011-Dec-14 04:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.094 (still bad) 2011-Dec-14 04:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.097 (still bad) 2011-Dec-14 04:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.094 (still bad) 2011-Dec-14 04:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.095 (still bad) 2011-Dec-14 04:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.103 (still bad) 2011-Dec-14 04:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.095 (still bad) 2011-Dec-14 04:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.095 (still bad) 2011-Dec-14 04:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.097 (still bad) 2011-Dec-14 04:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.094 (still bad) 2011-Dec-14 04:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.096 (still bad) 2011-Dec-14 04:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.102 (still bad) 2011-Dec-14 04:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.095 (still bad) 2011-Dec-14 04:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.095 (still bad) 2011-Dec-14 04:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.097 (still bad) 2011-Dec-14 04:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.094 (still bad) 2011-Dec-14 04:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.095 (still bad) 2011-Dec-14 04:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.102 (still bad) 2011-Dec-14 04:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.095 (still bad) 2011-Dec-14 04:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.095 (still bad) 2011-Dec-14 04:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.096 (still bad) 2011-Dec-14 04:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.095 (still bad) 2011-Dec-14 04:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.097 (still bad) 2011-Dec-14 04:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.104 (still bad) 2011-Dec-14 04:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.095 (still bad) 2011-Dec-14 04:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.095 (still bad) 2011-Dec-14 04:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.097 (still bad) 2011-Dec-14 04:47:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-14 04:47:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 0.986 1.082 1.095 2011-Dec-14 04:47:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 0.945 1.001 1.062 2011-Dec-14 04:47:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.782 1.024 1.090 1.012 2011-Dec-14 04:47:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.022 0.890 0.022 2011-Dec-14 04:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.097 (still bad) 2011-Dec-14 04:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.104 (still bad) 2011-Dec-14 04:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.098 (still bad) 2011-Dec-14 04:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-14 04:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-14 04:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-14 04:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.097 (still bad) 2011-Dec-14 04:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.097 (still bad) 2011-Dec-14 04:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.097 (still bad) 2011-Dec-14 04:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.097 (still bad) 2011-Dec-14 04:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.096 (still bad) 2011-Dec-14 04:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.095 (still bad) 2011-Dec-14 04:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.096 (still bad) 2011-Dec-14 04:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-14 04:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2011-Dec-14 04:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2011-Dec-14 04:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2011-Dec-14 04:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2011-Dec-14 04:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-14 04:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.096 (still bad) 2011-Dec-14 04:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.095 (still bad) 2011-Dec-14 04:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.096 (still bad) 2011-Dec-14 04:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.097 (still bad) 2011-Dec-14 04:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.095 (still bad) 2011-Dec-14 04:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.096 (still bad) 2011-Dec-14 04:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.097 (still bad) 2011-Dec-14 04:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.096 (still bad) 2011-Dec-14 04:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.096 (still bad) 2011-Dec-14 04:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.096 (still bad) 2011-Dec-14 04:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.095 (still bad) 2011-Dec-14 04:48:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-14 04:48:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 0.993 1.081 1.098 2011-Dec-14 04:48:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 0.945 1.002 1.063 2011-Dec-14 04:48:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.781 1.024 1.088 1.014 2011-Dec-14 04:48:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.024 0.891 0.024 2011-Dec-14 04:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2011-Dec-14 04:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.096 (still bad) 2011-Dec-14 04:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.096 (still bad) 2011-Dec-14 04:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.097 (still bad) 2011-Dec-14 04:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.096 (still bad) 2011-Dec-14 04:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.096 (still bad) 2011-Dec-14 04:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.097 (still bad) 2011-Dec-14 04:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.095 (still bad) 2011-Dec-14 04:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.097 (still bad) 2011-Dec-14 04:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.097 (still bad) 2011-Dec-14 04:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.095 (still bad) 2011-Dec-14 04:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.097 (still bad) 2011-Dec-14 04:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2011-Dec-14 04:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2011-Dec-14 04:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2011-Dec-14 04:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2011-Dec-14 04:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2011-Dec-14 04:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2011-Dec-14 04:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2011-Dec-14 04:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.098 (still bad) 2011-Dec-14 04:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.098 (still bad) 2011-Dec-14 04:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2011-Dec-14 04:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.097 (still bad) 2011-Dec-14 04:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.105 (still bad) 2011-Dec-14 04:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.099 (still bad) 2011-Dec-14 04:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.098 (still bad) 2011-Dec-14 04:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.098 (still bad) 2011-Dec-14 04:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.098 (still bad) 2011-Dec-14 04:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.098 (still bad) 2011-Dec-14 04:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.106 (still bad) 2011-Dec-14 04:49:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-14 04:49:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 0.993 1.081 1.100 2011-Dec-14 04:49:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.077 0.943 0.999 1.064 2011-Dec-14 04:49:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.782 1.025 1.091 1.014 2011-Dec-14 04:49:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.021 0.892 0.022 2011-Dec-14 04:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.099 (still bad) 2011-Dec-14 04:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.101 (still bad) 2011-Dec-14 04:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.096 (still bad) 2011-Dec-14 04:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2011-Dec-14 04:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.105 (still bad) 2011-Dec-14 04:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.099 (still bad) 2011-Dec-14 04:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2011-Dec-14 04:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2011-Dec-14 04:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2011-Dec-14 04:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.099 (still bad) 2011-Dec-14 04:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.103 (still bad) 2011-Dec-14 04:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2011-Dec-14 04:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.097 (still bad) 2011-Dec-14 04:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.100 (still bad) 2011-Dec-14 04:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.099 (still bad) 2011-Dec-14 04:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2011-Dec-14 04:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2011-Dec-14 04:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.098 (still bad) 2011-Dec-14 04:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2011-Dec-14 04:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.098 (still bad) 2011-Dec-14 04:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.097 (still bad) 2011-Dec-14 04:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.098 (still bad) 2011-Dec-14 04:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.101 (still bad) 2011-Dec-14 04:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.099 (still bad) 2011-Dec-14 04:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.097 (still bad) 2011-Dec-14 04:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.099 (still bad) 2011-Dec-14 04:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2011-Dec-14 04:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.097 (still bad) 2011-Dec-14 04:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.101 (still bad) 2011-Dec-14 04:50:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-14 04:50:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 0.991 1.083 1.100 2011-Dec-14 04:50:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.077 0.945 1.007 1.069 2011-Dec-14 04:50:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.782 1.025 1.096 1.020 2011-Dec-14 04:50:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.021 0.891 0.021 2011-Dec-14 04:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2011-Dec-14 04:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.100 (still bad) 2011-Dec-14 04:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.099 (still bad) 2011-Dec-14 04:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2011-Dec-14 04:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.102 (still bad) 2011-Dec-14 04:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.099 (still bad) 2011-Dec-14 04:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-14 04:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.098 (still bad) 2011-Dec-14 04:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-14 04:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.101 (still bad) 2011-Dec-14 04:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2011-Dec-14 04:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2011-Dec-14 04:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.146 (still bad) 2011-Dec-14 04:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.152 (still bad) 2011-Dec-14 04:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.145 (still bad) 2011-Dec-14 04:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2011-Dec-14 04:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-14 04:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.103 (still bad) 2011-Dec-14 04:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-14 04:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.099 (still bad) 2011-Dec-14 04:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-14 04:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.097 (still bad) 2011-Dec-14 04:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.103 (still bad) 2011-Dec-14 04:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.097 (still bad) 2011-Dec-14 04:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.098 (still bad) 2011-Dec-14 04:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.098 (still bad) 2011-Dec-14 04:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-14 04:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-14 04:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.101 (still bad) 2011-Dec-14 04:51:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-14 04:51:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 0.989 1.081 1.097 2011-Dec-14 04:51:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 0.943 0.998 1.060 2011-Dec-14 04:51:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 1.032 1.107 1.032 2011-Dec-14 04:51:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.021 0.894 0.021 2011-Dec-14 04:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 04:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2011-Dec-14 04:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.154 (still bad) 2011-Dec-14 04:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.166 (still bad) 2011-Dec-14 04:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.180 (still bad) 2011-Dec-14 04:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.170 (still bad) 2011-Dec-14 04:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.159 (still bad) 2011-Dec-14 04:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.146 (still bad) 2011-Dec-14 04:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2011-Dec-14 04:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-14 04:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 04:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2011-Dec-14 04:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-14 04:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-14 04:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-14 04:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-14 04:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2011-Dec-14 04:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.102 (still bad) 2011-Dec-14 04:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2011-Dec-14 04:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.099 (still bad) 2011-Dec-14 04:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.096 (still bad) 2011-Dec-14 04:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.097 (still bad) 2011-Dec-14 04:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.103 (still bad) 2011-Dec-14 04:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2011-Dec-14 04:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.096 (still bad) 2011-Dec-14 04:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.097 (still bad) 2011-Dec-14 04:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.097 (still bad) 2011-Dec-14 04:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2011-Dec-14 04:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.105 (still bad) 2011-Dec-14 04:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.097 (still bad) 2011-Dec-14 04:52:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-14 04:52:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 0.988 1.081 1.097 2011-Dec-14 04:52:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 0.944 1.001 1.064 2011-Dec-14 04:52:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.782 1.024 1.092 1.017 2011-Dec-14 04:52:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.021 0.893 0.021 2011-Dec-14 04:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2011-Dec-14 04:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.096 (still bad) 2011-Dec-14 04:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.097 (still bad) 2011-Dec-14 04:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.100 (still bad) 2011-Dec-14 04:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.097 (still bad) 2011-Dec-14 04:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.099 (still bad) 2011-Dec-14 04:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2011-Dec-14 04:52:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2011-Dec-14 04:52:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.099 (still bad) 2011-Dec-14 04:52:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2011-Dec-14 04:53:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2011-Dec-14 04:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.100 (still bad) 2011-Dec-14 04:53:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2011-Dec-14 04:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2011-Dec-14 04:53:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 04:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-14 04:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 04:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-14 04:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 04:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 04:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2011-Dec-14 04:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.100 (still bad) 2011-Dec-14 04:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2011-Dec-14 04:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2011-Dec-14 04:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.097 (still bad) 2011-Dec-14 04:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.096 (still bad) 2011-Dec-14 04:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2011-Dec-14 04:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2011-Dec-14 04:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.096 (still bad) 2011-Dec-14 04:53:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-14 04:53:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 0.992 1.081 1.097 2011-Dec-14 04:53:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.070 0.942 1.001 1.063 2011-Dec-14 04:53:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.782 1.025 1.089 1.016 2011-Dec-14 04:53:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 0.022 0.904 0.022 2011-Dec-14 04:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.096 (still bad) 2011-Dec-14 04:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.097 (still bad) 2011-Dec-14 04:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2011-Dec-14 04:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.097 (still bad) 2011-Dec-14 04:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.097 (still bad) 2011-Dec-14 04:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.097 (still bad) 2011-Dec-14 04:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2011-Dec-14 04:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.096 (still bad) 2011-Dec-14 04:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2011-Dec-14 04:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-14 04:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.096 (still bad) 2011-Dec-14 04:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-14 04:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-14 04:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.096 (still bad) 2011-Dec-14 04:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-14 04:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2011-Dec-14 04:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-14 04:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2011-Dec-14 04:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2011-Dec-14 04:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-14 04:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.106 (still bad) 2011-Dec-14 04:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.100 (still bad) 2011-Dec-14 04:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2011-Dec-14 04:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.100 (still bad) 2011-Dec-14 04:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2011-Dec-14 04:54:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.099 (still bad) 2011-Dec-14 04:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.099 (still bad) 2011-Dec-14 04:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2011-Dec-14 04:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.099 (still bad) 2011-Dec-14 04:54:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-14 04:54:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 0.992 1.080 1.098 2011-Dec-14 04:54:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 0.946 1.002 1.065 2011-Dec-14 04:54:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.784 1.030 1.091 1.019 2011-Dec-14 04:54:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.026 0.022 0.893 0.023 2011-Dec-14 04:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.096 (still bad) 2011-Dec-14 04:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2011-Dec-14 04:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2011-Dec-14 04:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.097 (still bad) 2011-Dec-14 04:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.097 (still bad) 2011-Dec-14 04:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.097 (still bad) 2011-Dec-14 04:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.096 (still bad) 2011-Dec-14 04:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2011-Dec-14 04:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.100 (still bad) 2011-Dec-14 04:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2011-Dec-14 04:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.097 (still bad) 2011-Dec-14 04:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.099 (still bad) 2011-Dec-14 04:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2011-Dec-14 04:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.099 (still bad) 2011-Dec-14 04:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.101 (still bad) 2011-Dec-14 04:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2011-Dec-14 04:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2011-Dec-14 04:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2011-Dec-14 04:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.097 (still bad) 2011-Dec-14 04:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.099 (still bad) 2011-Dec-14 04:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.102 (still bad) 2011-Dec-14 04:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2011-Dec-14 04:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2011-Dec-14 04:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.099 (still bad) 2011-Dec-14 04:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.099 (still bad) 2011-Dec-14 04:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2011-Dec-14 04:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.101 (still bad) 2011-Dec-14 04:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2011-Dec-14 04:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.099 (still bad) 2011-Dec-14 04:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.101 (still bad) 2011-Dec-14 04:55:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-14 04:55:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 0.990 1.085 1.100 2011-Dec-14 04:55:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 0.944 0.998 1.060 2011-Dec-14 04:55:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.782 1.026 1.102 1.025 2011-Dec-14 04:55:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.026 0.021 0.893 0.021 2011-Dec-14 04:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.103 (still bad) 2011-Dec-14 04:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-14 04:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.102 (still bad) 2011-Dec-14 04:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.102 (still bad) 2011-Dec-14 04:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.104 (still bad) 2011-Dec-14 04:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.101 (still bad) 2011-Dec-14 04:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.102 (still bad) 2011-Dec-14 04:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-14 04:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.104 (still bad) 2011-Dec-14 04:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2011-Dec-14 04:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2011-Dec-14 04:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2011-Dec-14 04:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-14 04:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-14 04:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2011-Dec-14 04:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.111 (still bad) 2011-Dec-14 04:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-14 04:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.104 (still bad) 2011-Dec-14 04:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.105 (still bad) 2011-Dec-14 04:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2011-Dec-14 04:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-14 04:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.096 (still bad) 2011-Dec-14 04:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-14 04:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.095 (still bad) 2011-Dec-14 04:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2011-Dec-14 04:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2011-Dec-14 04:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-14 04:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-14 04:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-14 04:56:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-14 04:56:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 0.991 1.083 1.097 2011-Dec-14 04:56:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.073 0.943 0.995 1.060 2011-Dec-14 04:56:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.779 1.027 1.091 1.014 2011-Dec-14 04:56:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.027 0.020 0.893 0.020 2011-Dec-14 04:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2011-Dec-14 04:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2011-Dec-14 04:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2011-Dec-14 04:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2011-Dec-14 04:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2011-Dec-14 04:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2011-Dec-14 04:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2011-Dec-14 04:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2011-Dec-14 04:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2011-Dec-14 04:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-14 04:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2011-Dec-14 04:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.100 (still bad) 2011-Dec-14 04:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2011-Dec-14 04:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.100 (still bad) 2011-Dec-14 04:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.099 (still bad) 2011-Dec-14 04:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.099 (still bad) 2011-Dec-14 04:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.100 (still bad) 2011-Dec-14 04:57:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 16-31 errors 2011-Dec-14 04:57:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 8-15 errors 2011-Dec-14 04:57:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 8-15 errors 2011-Dec-14 04:57:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 2-3 errors 2011-Dec-14 04:57:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 2-3 errors 2011-Dec-14 04:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.099 (still bad) 2011-Dec-14 04:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.101 (still bad) 2011-Dec-14 04:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.100 (still bad) 2011-Dec-14 04:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.098 (still bad) 2011-Dec-14 04:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.100 (still bad) 2011-Dec-14 04:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.100 (still bad) 2011-Dec-14 04:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.102 (still bad) 2011-Dec-14 04:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.104 (still bad) 2011-Dec-14 04:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.105 (still bad) 2011-Dec-14 04:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.105 (still bad) 2011-Dec-14 04:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.106 (still bad) 2011-Dec-14 04:57:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2011-Dec-14 04:57:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 8-15 errors 2011-Dec-14 04:57:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 8-15 errors 2011-Dec-14 04:57:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 16-31 errors 2011-Dec-14 04:57:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 16-31 errors 2011-Dec-14 04:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.106 (still bad) 2011-Dec-14 04:57:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-14 04:57:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 0.997 1.088 1.105 2011-Dec-14 04:57:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 0.943 1.002 1.063 2011-Dec-14 04:57:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.780 1.026 1.093 1.016 2011-Dec-14 04:57:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.026 0.023 0.893 0.023 2011-Dec-14 04:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2011-Dec-14 04:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.103 (still bad) 2011-Dec-14 04:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.103 (still bad) 2011-Dec-14 04:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.103 (still bad) 2011-Dec-14 04:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.099 (still bad) 2011-Dec-14 04:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.100 (still bad) 2011-Dec-14 04:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.105 (still bad) 2011-Dec-14 04:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.100 (still bad) 2011-Dec-14 04:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.099 (still bad) 2011-Dec-14 04:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.102 (still bad) 2011-Dec-14 04:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.100 (still bad) 2011-Dec-14 04:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.101 (still bad) 2011-Dec-14 04:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2011-Dec-14 04:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.100 (still bad) 2011-Dec-14 04:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.101 (still bad) 2011-Dec-14 04:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.102 (still bad) 2011-Dec-14 04:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.101 (still bad) 2011-Dec-14 04:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.103 (still bad) 2011-Dec-14 04:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-14 04:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2011-Dec-14 04:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2011-Dec-14 04:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.101 (still bad) 2011-Dec-14 04:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.101 (still bad) 2011-Dec-14 04:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2011-Dec-14 04:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2011-Dec-14 04:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.101 (still bad) 2011-Dec-14 04:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.101 (still bad) 2011-Dec-14 04:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.103 (still bad) 2011-Dec-14 04:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.100 (still bad) 2011-Dec-14 04:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.102 (still bad) 2011-Dec-14 04:58:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-14 04:58:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.083 1.000 1.091 1.107 2011-Dec-14 04:58:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 0.952 1.017 1.080 2011-Dec-14 04:58:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.784 1.030 1.097 1.022 2011-Dec-14 04:58:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.032 0.023 0.899 0.023 2011-Dec-14 04:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.101 (still bad) 2011-Dec-14 04:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.099 (still bad) 2011-Dec-14 04:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.099 (still bad) 2011-Dec-14 04:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.099 (still bad) 2011-Dec-14 04:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.100 (still bad) 2011-Dec-14 04:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.107 (still bad) 2011-Dec-14 04:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.101 (still bad) 2011-Dec-14 04:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.101 (still bad) 2011-Dec-14 04:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.102 (still bad) 2011-Dec-14 04:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.102 (still bad) 2011-Dec-14 04:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.102 (still bad) 2011-Dec-14 04:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2011-Dec-14 04:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.107 (still bad) 2011-Dec-14 04:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.112 (still bad) 2011-Dec-14 04:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2011-Dec-14 04:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-14 04:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 04:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 04:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-14 04:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2011-Dec-14 04:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.105 (still bad) 2011-Dec-14 04:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.102 (still bad) 2011-Dec-14 04:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.103 (still bad) 2011-Dec-14 04:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.105 (still bad) 2011-Dec-14 04:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.103 (still bad) 2011-Dec-14 04:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.102 (still bad) 2011-Dec-14 04:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.103 (still bad) 2011-Dec-14 04:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.101 (still bad) 2011-Dec-14 04:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.102 (still bad) 2011-Dec-14 04:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.103 (still bad) 2011-Dec-14 04:59:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-14 04:59:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 0.996 1.084 1.102 2011-Dec-14 04:59:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.072 0.948 1.000 1.064 2011-Dec-14 04:59:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.783 1.025 1.093 1.018 2011-Dec-14 04:59:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.027 0.022 0.895 0.022 2011-Dec-14 04:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.101 (still bad) 2011-Dec-14 04:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.101 (still bad) 2011-Dec-14 04:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.100 (still bad) 2011-Dec-14 04:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.102 (still bad) 2011-Dec-14 04:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.103 (still bad) 2011-Dec-14 05:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.103 (still bad) 2011-Dec-14 05:00:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 05:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-14 05:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-14 05:00:06 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-14 05:00:06 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-14 05:00:06 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-14 05:00:06 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2011-Dec-14 05:00:06 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-14 05:00:06 LOG5 end_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2011-Dec-14 05:00:06 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-14 05:00:06 LOG5 finish_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2011-Dec-14 05:00:06 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-14 05:00:06 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-14 05:00:06 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-14 05:00:06 LOG5 end_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2011-Dec-14 05:00:06 COMMAND run_command_line: EXECUTING command 27: 'ENDIF' 2011-Dec-14 05:00:06 COMMAND run_command_line: EXECUTING command 30: 'IF LSTSLEW(AGES3193_p3_141) < 100940 THEN' 2011-Dec-14 05:00:06 LOG3 is_if_valid: Current source data: up 129.8 3.1 UP - - 73 4.1 2011-Dec-14 05:00:06 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_141) < 100940 2011-Dec-14 05:00:06 INFO5 is_if_valid: Condition parsed as: 10.131974333333334 < 10.161111111111111 2011-Dec-14 05:00:06 COMMAND run_command_line: EXECUTING command 31: 'FIXEDDRIFT az=118.21 alfaangle=78.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_141 ra=95300.00 dec=202300.00' 2011-Dec-14 05:00:06 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-14 05:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-14 05:00:07 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-14 05:00:07 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 118.21 78.5 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_141 95300.00 202300.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-14 05:00:07 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-14 05:00:07 LOG5 begin_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2011-Dec-14 05:00:07 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_139' 2011-Dec-14 05:00:07 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-14 05:00:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_141} 2011-Dec-14 05:00:07 INFO3 fixed_driftmap: Sending telescope to Az = 118.21 and ZA = 4.26 2011-Dec-14 05:00:07 LOG3 track_source: Calling 'track_source AGES3193_p3_141 118.21 4.2563671610 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-14 05:00:07 START begin_task: Starting task 'sending tracking commands' 2011-Dec-14 05:00:07 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2011-Dec-14 05:00:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_141} INFO {Slewing to source 'AGES3193_p3_141' ...} 2011-Dec-14 05:00:07 INFO1 track_source: Starting to track AGES3193_p3_141 2011-Dec-14 05:00:07 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_141" 2011-Dec-14 05:00:07 LOG3 vw_send: To DATATAKING: set ra 118.21 2011-Dec-14 05:00:07 LOG3 vw_send: To DATATAKING: set dec 4.2563671610 2011-Dec-14 05:00:07 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-14 05:00:07 LOG3 vw_send: To DATATAKING: pnt tr 118.21 4.2563671610 -CF 2011-Dec-14 05:00:07 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 05:00:07 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-14 05:00:07 LOG5 finish_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2011-Dec-14 05:00:07 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-14 05:00:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 05:00:07 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-14 05:00:07 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2011-Dec-14 05:00:07 START begin_task: Starting task 'rotate ALFA to +78.5 degrees' 2011-Dec-14 05:00:07 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2011-Dec-14 05:00:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +78.5 degrees ...} 2011-Dec-14 05:00:07 INFO2 rotate_alfa: ALFA commanded to +78.5 degrees 2011-Dec-14 05:00:07 LOG3 sock_errsend: To ALFAMOTOR: POSITION 78.5 REPLY 2011-Dec-14 05:00:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-14 05:00:07 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-14 05:00:07 LOG5 begin_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2011-Dec-14 05:00:07 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_141" 2011-Dec-14 05:00:07 LOG4 got_cormsg: From DATATAKING: set ra 118.21 2011-Dec-14 05:00:07 LOG4 got_cormsg: From DATATAKING: set dec 4.2563671610 2011-Dec-14 05:00:07 LOG4 got_cormsg: From DATATAKING: vw% 118.21 2011-Dec-14 05:00:07 LOG4 got_cormsg: From DATATAKING: vw% 4.2563671610 2011-Dec-14 05:00:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:00:07 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-14 05:00:07 LOG4 got_cormsg: From DATATAKING: pnt tr 118.21 4.2563671610 -CF 2011-Dec-14 05:00:07 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 05:00:07 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-14 05:00:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:01:06 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-14 05:01:06 INFO3 alfa_motor: ALFA rotator in-position +78.50 degrees 2011-Dec-14 05:01:06 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-14 05:01:06 LOG5 end_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2011-Dec-14 05:01:06 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-14 05:01:06 STOP finish_task: Finishing task 'rotate ALFA to +78.5 degrees' 2011-Dec-14 05:01:06 LOG5 finish_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2011-Dec-14 05:01:06 INFO2 finish_task: DONE finished configuration: rotating ALFA to +78.5 degrees 2011-Dec-14 05:01:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 05:01:06 STOP end_task: Finishing task 'rotate ALFA to +78.5 degrees' with status 'OK' 2011-Dec-14 05:01:06 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2011-Dec-14 05:01:06 START begin_task: Starting task 'waiting on telescope' 2011-Dec-14 05:01:06 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2011-Dec-14 05:01:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-14 05:01:06 LOG3 waittrk: Start waittrk 5 2011-Dec-14 05:01:06 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-14 05:01:06 LOG5 begin_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2011-Dec-14 05:01:11 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-14 05:01:11 LOG5 end_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2011-Dec-14 05:01:11 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-14 05:01:11 LOG5 begin_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2011-Dec-14 05:04:43 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-14 05:04:43 LOG5 end_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2011-Dec-14 05:04:43 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-14 05:04:43 INFO2 waittrk: Now tracking AGES3193_p3_141 2011-Dec-14 05:04:43 LOG4 waittrk: Current telescope position: Az = 117.98 ZA = 4.26 2011-Dec-14 05:04:43 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-14 05:04:43 LOG5 finish_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2011-Dec-14 05:04:43 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-14 05:04:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 05:04:44 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-14 05:04:44 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2011-Dec-14 05:04:44 START begin_task: Starting task 'selecting calibration type' 2011-Dec-14 05:04:44 LOG5 begin_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2011-Dec-14 05:04:44 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-14 05:04:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-14 05:04:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 05:04:44 START begin_task: Starting task 'waiting on setcal' 2011-Dec-14 05:04:44 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2011-Dec-14 05:04:44 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-14 05:04:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 05:04:44 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:04:45 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-14 05:04:45 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-14 05:04:45 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2011-Dec-14 05:04:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-14 05:04:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-14 05:04:45 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-14 05:04:45 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-14 05:04:45 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2011-Dec-14 05:04:45 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:04:45 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-14 05:04:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-14 05:04:45 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2011-Dec-14 05:04:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-14 05:04:45 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-14 05:04:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-14 05:04:45 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-14 05:04:45 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-14 05:04:45 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2011-Dec-14 05:04:45 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-14 05:04:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-14 05:04:45 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2011-Dec-14 05:04:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-14 05:04:45 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-14 05:04:45 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-14 05:04:45 LOG5 end_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2011-Dec-14 05:04:45 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Dec-14 05:04:45 INFO2 astwait: Waiting for 11 seconds from 09:04:45 to 09:04:56 UTC ... 2011-Dec-14 05:04:45 LOG4 send_obs_status: To obs_status: <1> TASKTIME 11 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-14 05:04:45 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Dec-14 05:04:45 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2011-Dec-14 05:04:56 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Dec-14 05:04:56 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2011-Dec-14 05:04:56 INFO3 astwait: Finished waiting 2011-Dec-14 05:04:56 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-14 05:04:56 LOG5 dopset_later: Calling 'dopset_later 61.308106557397579' 2011-Dec-14 05:04:56 INFO3 dopset_later: Setting Doppler correction for 05:05:56 (61.3 seconds from now) 2011-Dec-14 05:04:56 LOG5 antvel: Calling 'antvel 118.210000 4.256367 F Heliocentric 61.308106557397579' 2011-Dec-14 05:04:56 LOG2 antvel: Transforming current Az = 118.21 ZA = 4.26 to apparent RA = 09:53:41.4 Dec = +20:19:23.3 2011-Dec-14 05:04:56 LOG2 antvel: Parameters to Doppler: Heliocentric 32756 2011 348 0.0 2011-Dec-14 05:04:56 INFO5 antvel: Computed antenna velocity: -26.29079 km/s 2011-Dec-14 05:04:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-26.290793133899999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-14 05:04:56 INFO4 dopset_gen: New sky frequencies: 1381.364570 1381.364570 1381.364570 1381.364570 1381.364570 1381.364570 1381.364570 1381.364570 1381.364570 2011-Dec-14 05:04:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.364570 sky0=1381.364570 sky1=1381.364570 sky2=1381.364570 sky3=1381.364570 sky4=1381.364570 sky5=1381.364570 sky6=1381.364570 sky7=1381.364570 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-14 05:04:56 LOG2 dopset_gen: Result from 'sky2syn': 1631.364570 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-14 05:04:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631364570.0} 2011-Dec-14 05:04:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 05:04:56 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-14 05:04:56 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-14 05:04:56 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.2 Dec = +20:22:46.7 2011-Dec-14 05:04:56 LOG3 track_source: Calling 'track_source AGES3193_p3_141 095203.2 202246.7 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-14 05:04:56 START begin_task: Starting task 'sending tracking commands' 2011-Dec-14 05:04:56 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2011-Dec-14 05:04:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_141} INFO {Slewing to source 'AGES3193_p3_141' ...} 2011-Dec-14 05:04:56 INFO1 track_source: Starting to track AGES3193_p3_141 2011-Dec-14 05:04:56 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_141" 2011-Dec-14 05:04:56 LOG3 vw_send: To DATATAKING: set ra 095203.2 2011-Dec-14 05:04:56 LOG3 vw_send: To DATATAKING: set dec 202246.7 2011-Dec-14 05:04:56 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-14 05:04:56 LOG3 vw_send: To DATATAKING: pnt tr 095203.2 202246.7 -CJ 2011-Dec-14 05:04:56 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 05:04:56 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-14 05:04:56 LOG5 finish_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2011-Dec-14 05:04:56 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-14 05:04:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 05:04:56 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-14 05:04:56 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2011-Dec-14 05:04:56 START begin_task: Starting task 'waiting on telescope' 2011-Dec-14 05:04:56 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2011-Dec-14 05:04:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-14 05:04:56 LOG3 waittrk: Start waittrk 5 2011-Dec-14 05:04:56 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-14 05:04:56 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2011-Dec-14 05:04:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631364570.0} 2011-Dec-14 05:04:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 05:04:56 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:04:56 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_141" 2011-Dec-14 05:04:56 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:04:56 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:04:56 LOG4 got_cormsg: From DATATAKING: set ra 095203.2 2011-Dec-14 05:04:56 LOG4 got_cormsg: From DATATAKING: set dec 202246.7 2011-Dec-14 05:04:56 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-14 05:04:56 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.2 202246.7 -CJ 2011-Dec-14 05:04:56 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 05:04:56 LOG4 got_cormsg: From DATATAKING: 095203.2 2011-Dec-14 05:04:56 LOG4 got_cormsg: From DATATAKING: vw% 202246.7 2011-Dec-14 05:04:56 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2011-Dec-14 05:05:01 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-14 05:05:01 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2011-Dec-14 05:05:01 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-14 05:05:01 LOG5 begin_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2011-Dec-14 05:05:05 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-14 05:05:05 LOG5 end_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2011-Dec-14 05:05:05 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-14 05:05:05 INFO2 waittrk: Now tracking AGES3193_p3_141 2011-Dec-14 05:05:05 LOG4 waittrk: Current telescope position: Az = 117.80 ZA = 4.28 2011-Dec-14 05:05:05 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-14 05:05:05 LOG5 finish_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2011-Dec-14 05:05:05 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-14 05:05:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 05:05:05 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-14 05:05:05 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2011-Dec-14 05:05:05 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-14 05:05:05 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2011-Dec-14 05:05:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-14 05:05:05 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-14 05:05:05 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-14 05:05:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-14 05:05:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 05:05:05 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-14 05:05:05 LOG5 begin_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2011-Dec-14 05:05:05 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-14 05:05:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 05:05:08 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:05:08 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-14 05:05:08 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-14 05:05:08 LOG5 end_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2011-Dec-14 05:05:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-14 05:05:08 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-14 05:05:08 LOG5 begin_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2011-Dec-14 05:05:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-14 05:05:08 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-14 05:05:08 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-14 05:05:08 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-14 05:05:08 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-14 05:05:08 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-14 05:05:08 LOG5 begin_task: Level: (5) ID = <10169> Status = 0 0 0 0 ok 2011-Dec-14 05:05:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:05:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-14 05:05:09 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 7 5 dB 2011-Dec-14 05:05:09 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 2 3 dB 2011-Dec-14 05:05:09 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 4 dB --- beam 3: 2 2 dB 2011-Dec-14 05:05:09 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2011-Dec-14 05:05:09 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-14 05:05:09 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-14 05:05:09 LOG5 end_task: Level: (5) ID = <10169> Status = 0 0 0 0 ok 2011-Dec-14 05:05:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.059 1.000 ALFA beam 1: 1.075 1.112 2011-Dec-14 05:05:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.066 0.957 ALFA beam 3: 0.995 1.044 2011-Dec-14 05:05:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.785 1.028 ALFA beam 5: 1.073 1.029 2011-Dec-14 05:05:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.991 0.014 ALFA beam 7: 1.078 0.014 2011-Dec-14 05:05:09 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-14 05:05:09 LOG5 finish_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2011-Dec-14 05:05:09 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-14 05:05:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 05:05:09 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-14 05:05:09 LOG5 end_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2011-Dec-14 05:05:09 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-14 05:05:09 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2011-Dec-14 05:05:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-14 05:05:09 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-14 05:05:09 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-14 05:05:09 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-14 05:05:09 LOG5 begin_task: Level: (5) ID = <10171> Status = 0 0 0 0 ok 2011-Dec-14 05:05:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-14 05:05:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 1.000 1.075 1.112 2011-Dec-14 05:05:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 0.957 0.995 1.044 2011-Dec-14 05:05:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 1.028 1.073 1.029 2011-Dec-14 05:05:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.991 0.014 1.078 0.014 2011-Dec-14 05:05:15 INFO3 from_mock: From MOCK: b0s0g0 rms:A 30.9 27.1 B 29.4 29.4 mn:A 0.2 0.1 B -0.2 -0.3 gn: 11 11 2011-Dec-14 05:05:15 INFO3 from_mock: From MOCK: b0s1g0 rms:A 31.1 29.7 B 30.6 32.4 mn:A 0.2 -0.3 B -0.5 0.2 gn: 12 12 2011-Dec-14 05:05:15 INFO3 from_mock: From MOCK: b1s0g0 rms:A 29.5 27.6 B 32.4 28.4 mn:A 0.6 0.7 B 0.1 -0.1 gn: 7 11 2011-Dec-14 05:05:15 INFO3 from_mock: From MOCK: b1s1g0 rms:A 32.5 30.0 B 30.5 30.5 mn:A -0.3 -0.3 B 0.6 0.2 gn: 9 10 2011-Dec-14 05:05:15 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.2 30.3 B 27.9 29.2 mn:A 0.0 -0.3 B 0.3 0.1 gn: 11 11 2011-Dec-14 05:05:15 INFO3 from_mock: From MOCK: b2s1g0 rms:A 28.4 28.7 B 32.2 29.9 mn:A 0.3 -0.3 B 0.1 0.2 gn: 11 12 2011-Dec-14 05:05:15 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.7 31.5 B 30.2 27.0 mn:A 0.3 -0.3 B 0.1 -0.3 gn: 13 12 2011-Dec-14 05:05:15 INFO3 from_mock: From MOCK: b3s1g0 rms:A 29.4 28.7 B 28.6 29.8 mn:A -0.3 0.3 B 0.1 0.2 gn: 12 12 2011-Dec-14 05:05:15 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.6 28.7 B 30.6 30.7 mn:A -0.2 -0.3 B -0.4 -0.0 gn: 13 12 2011-Dec-14 05:05:15 INFO3 from_mock: From MOCK: b4s1g0 rms:A 31.5 28.5 B 29.4 28.3 mn:A 0.0 -0.0 B -0.4 0.2 gn: 16 13 2011-Dec-14 05:05:15 INFO3 from_mock: From MOCK: b5s0g0 rms:A 31.2 30.1 B 29.5 29.5 mn:A 0.4 0.4 B -0.1 0.5 gn: 13 11 2011-Dec-14 05:05:15 INFO3 from_mock: From MOCK: b5s1g0 rms:A 31.5 31.2 B 29.8 29.5 mn:A -0.4 0.3 B 0.0 0.2 gn: 13 11 2011-Dec-14 05:05:15 INFO3 from_mock: From MOCK: b6s0g0 rms:A 31.0 28.4 B 14.1 14.5 mn:A -0.4 0.2 B 0.4 -0.5 gn: 13 31 2011-Dec-14 05:05:15 INFO3 from_mock: From MOCK: b6s1g0 rms:A 31.6 28.7 B 11.1 10.8 mn:A 0.6 0.6 B 0.1 0.2 gn: 14 31 2011-Dec-14 05:05:15 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-14 05:05:15 LOG5 end_task: Level: (5) ID = <10171> Status = 0 0 0 0 ok 2011-Dec-14 05:05:15 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-14 05:05:15 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-14 05:05:15 LOG5 finish_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2011-Dec-14 05:05:15 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-14 05:05:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 05:05:15 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-14 05:05:15 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2011-Dec-14 05:05:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-14 05:05:15 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-14 05:05:15 LOG5 finish_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2011-Dec-14 05:05:15 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-14 05:05:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 05:05:15 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-14 05:05:15 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2011-Dec-14 05:05:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 05:05:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 05:05:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 05:05:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 05:05:15 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-14 05:05:15 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-14 05:05:15 LOG5 begin_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2011-Dec-14 05:05:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-14 05:05:15 START begin_task: Starting task 'selecting calibration type' 2011-Dec-14 05:05:15 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2011-Dec-14 05:05:15 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-14 05:05:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-14 05:05:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 05:05:15 START begin_task: Starting task 'waiting on setcal' 2011-Dec-14 05:05:15 LOG5 begin_task: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2011-Dec-14 05:05:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Ellioty Gonzalez' 2011-Dec-14 05:05:15 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-14 05:05:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 05:05:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:05:16 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-14 05:05:16 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-14 05:05:16 LOG5 end_task: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2011-Dec-14 05:05:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-14 05:05:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-14 05:05:16 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-14 05:05:16 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-14 05:05:16 LOG5 begin_task: Level: (5) ID = <10175> Status = 0 0 0 0 ok 2011-Dec-14 05:05:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:05:16 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-14 05:05:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-14 05:05:16 LOG5 end_task: Level: (5) ID = <10175> Status = 0 0 0 0 ok 2011-Dec-14 05:05:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-14 05:05:16 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-14 05:05:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-14 05:05:16 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-14 05:05:16 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-14 05:05:16 LOG5 begin_task: Level: (5) ID = <10176> Status = 0 0 0 0 ok 2011-Dec-14 05:05:16 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-14 05:05:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-14 05:05:16 LOG5 end_task: Level: (5) ID = <10176> Status = 0 0 0 0 ok 2011-Dec-14 05:05:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-14 05:05:16 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-14 05:05:16 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-14 05:05:16 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2011-Dec-14 05:05:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-14 05:05:16 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-14 05:05:16 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-14 05:05:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-14 05:05:16 LOG5 begin_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2011-Dec-14 05:05:16 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-14 05:05:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-14 05:05:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-14 05:05:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-14 05:05:16 LOG5 end_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2011-Dec-14 05:05:16 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-14 05:05:16 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-14 05:05:16 LOG5 begin_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2011-Dec-14 05:05:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-14 05:05:16 LOG5 log_alfabeam: Parameters: 9.8675555555555547 20.379638888888891 10.150266 2011.9533524729384 78.499947 2011-Dec-14 05:05:16 LOG4 log_alfabeam: ALFABEAM 0 9.867555555555567 20.379638888888891 2011-Dec-14 05:05:16 LOG4 log_alfabeam: ALFABEAM 1 9.869961189295832 20.287656258636588 2011-Dec-14 05:05:16 LOG4 log_alfabeam: ALFABEAM 2 9.874777348831486 20.349041472422275 2011-Dec-14 05:05:16 LOG4 log_alfabeam: ALFABEAM 3 9.872487847043631 20.441221033545155 2011-Dec-14 05:05:16 LOG4 log_alfabeam: ALFABEAM 4 9.865286808494412 20.473135951322273 2011-Dec-14 05:05:16 LOG4 log_alfabeam: ALFABEAM 5 9.860307984477316 20.409346558275296 2011-Dec-14 05:05:16 LOG4 log_alfabeam: ALFABEAM 6 9.862694965029714 20.316039594636138 2011-Dec-14 05:05:16 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-14 05:05:16 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-14 05:05:16 LOG3 take_mock_data: PSET configuration: obsnm=Ellioty Gonzalez 2011-Dec-14 05:05:16 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_141 2011-Dec-14 05:05:16 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-14 05:05:16 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-14 05:05:16 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-14 05:05:16 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-14 05:05:16 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-14 05:05:16 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-14 05:05:16 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-14 05:05:16 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-14 05:05:16 LOG3 take_mock_data: PSET configuration: patternid=134800009 2011-Dec-14 05:05:16 LOG3 take_mock_data: PSET configuration: scanid=134800010 2011-Dec-14 05:05:16 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-14 05:05:16 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-14 05:05:16 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-14 05:05:16 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456364570.0 2011-Dec-14 05:05:16 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306364570.0 2011-Dec-14 05:05:16 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-14 05:05:16 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-14 05:05:16 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Ellioty Gonzalez:object=AGES3193_p3_141:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=134800009:scanid=134800010:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456364570.0:topobfreqhz=1306364570.0:filetype=1 2011-Dec-14 05:05:16 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-14 05:05:16 LOG5 begin_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2011-Dec-14 05:05:16 LOG4 from_mock: From MOCK: psetok 2011-Dec-14 05:05:16 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-14 05:05:16 LOG5 end_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2011-Dec-14 05:05:16 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-14 05:05:16 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-14 05:05:16 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-14 05:05:16 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-14 05:05:16 LOG5 begin_task: Level: (5) ID = <10180> Status = 0 0 0 0 ok 2011-Dec-14 05:05:16 NOTE WAPPDATA-new_file: New FITS file: wapp.20111214.a2048.0003.fits 2011-Dec-14 05:05:16 LOG4 from_mock: From MOCK: starok 2011-Dec-14 05:05:16 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-14 05:05:16 LOG5 end_task: Level: (5) ID = <10180> Status = 0 0 0 0 ok 2011-Dec-14 05:05:16 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-14 05:05:16 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134800010 2011-Dec-14 05:05:17 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-14 05:05:17 LOG5 begin_task: Level: (5) ID = <10181> Status = 0 0 0 0 ok 2011-Dec-14 05:05:17 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111214.a2048.0003.fits} 2011-Dec-14 05:05:17 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-14 05:05:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 05:05:17 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-14 05:05:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-14 05:05:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32718.00 2011-Dec-14 05:05:18 INFO2 got_mock_message: Mock spectrometer start file number is 00900 2011-Dec-14 05:05:19 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-14 05:05:19 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-14 05:05:19 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-14 05:05:19 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-14 05:05:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-14 05:05:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-14 05:05:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-14 05:05:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-14 05:05:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-14 05:05:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-14 05:05:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-14 05:05:19 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-14 05:05:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:05:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:05:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:05:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:05:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:05:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:05:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:05:21 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:05:22.01 2011-Dec-14 05:05:22 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323853522.01 Wed Dec 14 05:05:22 2011 2011-Dec-14 05:05:22 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-14 05:05:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.364570 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 05:05:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.364570 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:05:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.364570 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:05:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.364570 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:05:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.364570 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-14 05:05:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.364570 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 05:05:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.364570 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 05:05:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.364570 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 05:05:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.364570 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 05:05:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 05:05:28 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-14 05:05:28 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-14 05:05:28 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-14 05:05:28 LOG5 end_task: Level: (5) ID = <10181> Status = 0 0 0 0 ok 2011-Dec-14 05:05:28 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-14 05:05:28 LOG5 end_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2011-Dec-14 05:05:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-14 05:05:28 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-14 05:05:28 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-14 05:05:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-14 05:05:28 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2011-Dec-14 05:05:28 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-14 05:05:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-14 05:05:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-14 05:05:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-14 05:05:28 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2011-Dec-14 05:05:28 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-14 05:05:28 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-14 05:05:28 LOG5 begin_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2011-Dec-14 05:05:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-14 05:05:28 LOG5 log_alfabeam: Parameters: 9.8675555555555547 20.379638888888891 10.153330 2011.9533528215075 78.499947 2011-Dec-14 05:05:28 LOG4 log_alfabeam: ALFABEAM 0 9.867555555555560 20.379638888888888 2011-Dec-14 05:05:28 LOG4 log_alfabeam: ALFABEAM 1 9.869991098654472 20.287808376697978 2011-Dec-14 05:05:28 LOG4 log_alfabeam: ALFABEAM 2 9.874787547905010 20.349519900169028 2011-Dec-14 05:05:28 LOG4 log_alfabeam: ALFABEAM 3 9.872467034949516 20.441553246226640 2011-Dec-14 05:05:28 LOG4 log_alfabeam: ALFABEAM 4 9.865255121112851 20.472979187904794 2011-Dec-14 05:05:28 LOG4 log_alfabeam: ALFABEAM 5 9.860298301590321 20.408873781929103 2011-Dec-14 05:05:28 LOG4 log_alfabeam: ALFABEAM 6 9.862715831202152 20.315729750668176 2011-Dec-14 05:05:28 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-14 05:05:28 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-14 05:05:28 LOG3 take_mock_data: PSET configuration: obsnm=Ellioty Gonzalez 2011-Dec-14 05:05:28 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_141 2011-Dec-14 05:05:28 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-14 05:05:28 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-14 05:05:28 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-14 05:05:28 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-14 05:05:28 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-14 05:05:28 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-14 05:05:28 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-14 05:05:28 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-14 05:05:28 LOG3 take_mock_data: PSET configuration: patternid=134800009 2011-Dec-14 05:05:28 LOG3 take_mock_data: PSET configuration: scanid=134800011 2011-Dec-14 05:05:28 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-14 05:05:28 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-14 05:05:28 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-14 05:05:28 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456364570.0 2011-Dec-14 05:05:28 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306364570.0 2011-Dec-14 05:05:28 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-14 05:05:28 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-14 05:05:28 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Ellioty Gonzalez:object=AGES3193_p3_141:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=134800009:scanid=134800011:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456364570.0:topobfreqhz=1306364570.0:filetype=1 2011-Dec-14 05:05:28 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-14 05:05:28 LOG5 begin_task: Level: (5) ID = <10184> Status = 0 0 0 0 ok 2011-Dec-14 05:05:28 LOG4 from_mock: From MOCK: psetok 2011-Dec-14 05:05:28 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-14 05:05:28 LOG5 end_task: Level: (5) ID = <10184> Status = 0 0 0 0 ok 2011-Dec-14 05:05:28 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-14 05:05:28 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-14 05:05:28 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-14 05:05:28 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-14 05:05:28 LOG5 begin_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2011-Dec-14 05:05:28 LOG4 from_mock: From MOCK: starok 2011-Dec-14 05:05:28 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-14 05:05:28 LOG5 end_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2011-Dec-14 05:05:28 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-14 05:05:28 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134800011 2011-Dec-14 05:05:28 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-14 05:05:28 LOG5 begin_task: Level: (5) ID = <10186> Status = 0 0 0 0 ok 2011-Dec-14 05:05:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 05:05:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-14 05:05:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32729.00 2011-Dec-14 05:05:29 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-14 05:05:29 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-14 05:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.548 (still bad) 2011-Dec-14 05:05:31 INFO2 got_mock_message: Mock spectrometer start file number is 01000 2011-Dec-14 05:05:31 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-14 05:05:31 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-14 05:05:31 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-14 05:05:31 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-14 05:05:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-14 05:05:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-14 05:05:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-14 05:05:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-14 05:05:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-14 05:05:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-14 05:05:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-14 05:05:31 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-14 05:05:31 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:05:31 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:05:31 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:05:31 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:05:31 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:05:31 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:05:31 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:05:34 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:05:34.01 2011-Dec-14 05:05:34 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323853534.01 Wed Dec 14 05:05:34 2011 2011-Dec-14 05:05:34 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-14 05:05:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.364570 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 05:05:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.364570 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:05:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.364570 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:05:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.364570 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:05:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.364570 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:05:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.364570 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 05:05:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.364570 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 05:05:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.364570 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 05:05:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.364570 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 05:05:34 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-14 05:05:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 05:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-14 05:05:39 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-14 05:05:40 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-14 05:05:40 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-14 05:05:40 LOG5 end_task: Level: (5) ID = <10186> Status = 0 0 0 0 ok 2011-Dec-14 05:05:40 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-14 05:05:40 LOG5 end_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2011-Dec-14 05:05:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-14 05:05:40 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-14 05:05:40 LOG5 finish_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2011-Dec-14 05:05:40 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-14 05:05:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 05:05:40 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-14 05:05:40 LOG5 end_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2011-Dec-14 05:05:40 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-14 05:05:40 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 118.21 and ZA = 4.26 2011-Dec-14 05:05:40 LOG3 track_source: Calling 'track_source AGES3193_p3_141 118.21 4.2563671610 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-14 05:05:40 START begin_task: Starting task 'sending tracking commands' 2011-Dec-14 05:05:40 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2011-Dec-14 05:05:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_141} INFO {Slewing to source 'AGES3193_p3_141' ...} 2011-Dec-14 05:05:40 INFO1 track_source: Starting to track AGES3193_p3_141 2011-Dec-14 05:05:40 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_141" 2011-Dec-14 05:05:40 LOG3 vw_send: To DATATAKING: set ra 118.21 2011-Dec-14 05:05:40 LOG3 vw_send: To DATATAKING: set dec 4.2563671610 2011-Dec-14 05:05:40 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-14 05:05:40 LOG3 vw_send: To DATATAKING: pnt tr 118.21 4.2563671610 -CF 2011-Dec-14 05:05:40 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 05:05:40 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-14 05:05:40 LOG5 finish_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2011-Dec-14 05:05:40 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-14 05:05:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 05:05:40 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-14 05:05:40 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2011-Dec-14 05:05:40 LOG1 fixed_driftmap: Parameters: HA = +00:15:59.8 Start = 10:09:41.4 LST = 10:09:24.0 diff = 17.4 secs 2011-Dec-14 05:05:40 INFO2 fixed_driftmap: Waiting 15.4 seconds for RA 9:53:42 2011-Dec-14 05:05:40 INFO2 lstwait: Waiting for 15.3 secs from LST 10:09:24 to LST 10:09:39 ... 2011-Dec-14 05:05:40 LOG4 send_obs_status: To obs_status: <1> TASKTIME 15.312436974041095 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-14 05:05:40 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-14 05:05:40 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2011-Dec-14 05:05:40 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_141" 2011-Dec-14 05:05:40 LOG4 got_cormsg: From DATATAKING: set ra 118.21 2011-Dec-14 05:05:40 LOG4 got_cormsg: From DATATAKING: set dec 4.2563671610 2011-Dec-14 05:05:40 LOG4 got_cormsg: From DATATAKING: vw% 118.21 2011-Dec-14 05:05:40 LOG4 got_cormsg: From DATATAKING: vw% 4.2563671610 2011-Dec-14 05:05:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:05:40 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-14 05:05:40 LOG4 got_cormsg: From DATATAKING: pnt tr 118.21 4.2563671610 -CF 2011-Dec-14 05:05:40 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 05:05:40 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-14 05:05:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2011-Dec-14 05:05:55 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-14 05:05:55 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2011-Dec-14 05:05:55 LOG4 lstwait: Finished waiting 0.69 seconds late 2011-Dec-14 05:05:55 INFO3 lstwait: Finished waiting 2011-Dec-14 05:05:55 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-14 05:05:55 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-14 05:05:55 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-14 05:05:55 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-14 05:05:55 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-14 05:05:55 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-14 05:05:55 LOG5 begin_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2011-Dec-14 05:05:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-14 05:05:55 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-14 05:05:55 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-14 05:05:55 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-14 05:05:55 LOG3 take_mock_data: PSET configuration: obsnm=Ellioty Gonzalez 2011-Dec-14 05:05:55 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_141 2011-Dec-14 05:05:55 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-14 05:05:55 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-14 05:05:55 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-14 05:05:55 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-14 05:05:55 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-14 05:05:55 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-14 05:05:55 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-14 05:05:55 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-14 05:05:55 LOG3 take_mock_data: PSET configuration: patternid=134800012 2011-Dec-14 05:05:55 LOG3 take_mock_data: PSET configuration: scanid=134800012 2011-Dec-14 05:05:55 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-14 05:05:55 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-14 05:05:56 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-14 05:05:56 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456364570.0 2011-Dec-14 05:05:56 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306364570.0 2011-Dec-14 05:05:56 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-14 05:05:56 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-14 05:05:56 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Ellioty Gonzalez:object=AGES3193_p3_141:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=134800012:scanid=134800012:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456364570.0:topobfreqhz=1306364570.0:filetype=1 2011-Dec-14 05:05:56 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-14 05:05:56 LOG5 begin_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2011-Dec-14 05:05:56 LOG4 from_mock: From MOCK: psetok 2011-Dec-14 05:05:56 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-14 05:05:56 LOG5 end_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2011-Dec-14 05:05:56 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-14 05:05:56 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-14 05:05:56 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-14 05:05:56 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-14 05:05:56 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2011-Dec-14 05:05:56 LOG4 from_mock: From MOCK: starok 2011-Dec-14 05:05:56 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-14 05:05:56 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2011-Dec-14 05:05:56 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-14 05:05:56 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 134800012 2011-Dec-14 05:05:56 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-14 05:05:56 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2011-Dec-14 05:05:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 05:05:56 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-14 05:05:56 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-14 05:05:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-14 05:05:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32757.00 2011-Dec-14 05:05:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.364570 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 05:05:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.364570 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:05:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.364570 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:05:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.364570 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:05:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.364570 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:05:58 INFO2 got_mock_message: Mock spectrometer start file number is 01100 2011-Dec-14 05:05:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.364570 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 05:05:58 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-14 05:05:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.364570 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 05:05:58 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1199.9 s 2011-Dec-14 05:05:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.364570 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 05:05:58 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-14 05:05:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.364570 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 05:05:58 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-14 05:05:58 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-14 05:05:58 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-14 05:05:58 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-14 05:05:58 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-14 05:05:58 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-14 05:05:58 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-14 05:05:58 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-14 05:05:58 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-14 05:05:58 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 05:05:58 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 05:05:58 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 05:05:58 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 05:05:58 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 05:05:58 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 05:05:58 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 05:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-14 05:06:01 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:06:01.02 2011-Dec-14 05:06:01 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323853561.02 Wed Dec 14 05:06:01 2011 2011-Dec-14 05:06:01 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-14 05:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 05:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-14 05:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 05:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-14 05:06:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-14 05:06:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.058 0.997 1.078 1.110 2011-Dec-14 05:06:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.042 0.956 0.997 1.043 2011-Dec-14 05:06:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 1.027 1.078 1.029 2011-Dec-14 05:06:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.990 0.020 1.079 0.020 2011-Dec-14 05:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-14 05:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-14 05:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-14 05:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2011-Dec-14 05:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.112 (still bad) 2011-Dec-14 05:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.112 (still bad) 2011-Dec-14 05:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2011-Dec-14 05:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.111 (still bad) 2011-Dec-14 05:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.112 (still bad) 2011-Dec-14 05:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2011-Dec-14 05:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.112 (still bad) 2011-Dec-14 05:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.112 (still bad) 2011-Dec-14 05:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2011-Dec-14 05:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.112 (still bad) 2011-Dec-14 05:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.114 (still bad) 2011-Dec-14 05:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-14 05:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 05:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-14 05:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 05:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2011-Dec-14 05:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-14 05:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-14 05:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-14 05:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2011-Dec-14 05:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-14 05:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2011-Dec-14 05:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-14 05:07:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-14 05:07:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.058 0.999 1.077 1.112 2011-Dec-14 05:07:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.113 0.957 0.998 1.042 2011-Dec-14 05:07:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 1.028 1.076 1.029 2011-Dec-14 05:07:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.989 0.022 1.076 0.022 2011-Dec-14 05:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 05:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2011-Dec-14 05:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-14 05:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-14 05:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-14 05:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-14 05:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2011-Dec-14 05:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2011-Dec-14 05:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-14 05:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 05:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2011-Dec-14 05:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 05:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 05:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-14 05:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-14 05:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-14 05:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-14 05:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2011-Dec-14 05:08:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-14 05:08:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.061 1.000 1.078 1.112 2011-Dec-14 05:08:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.114 0.957 0.999 1.043 2011-Dec-14 05:08:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 1.027 1.079 1.030 2011-Dec-14 05:08:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.002 0.021 1.089 0.021 2011-Dec-14 05:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2011-Dec-14 05:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 05:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-14 05:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-14 05:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-14 05:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-14 05:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 05:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-14 05:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-14 05:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-14 05:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 05:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-14 05:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 05:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 05:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 05:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 05:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 05:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 05:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 05:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-14 05:09:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-14 05:09:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.065 1.001 1.078 1.113 2011-Dec-14 05:09:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.114 0.960 1.000 1.045 2011-Dec-14 05:09:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 1.028 1.083 1.031 2011-Dec-14 05:09:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.996 0.022 1.081 0.022 2011-Dec-14 05:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 05:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 05:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 05:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-14 05:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-14 05:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 05:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-14 05:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-14 05:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-14 05:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 05:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 05:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 05:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 05:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-14 05:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 05:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-14 05:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 05:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-14 05:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-14 05:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-14 05:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-14 05:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-14 05:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 05:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2011-Dec-14 05:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2011-Dec-14 05:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.114 (still bad) 2011-Dec-14 05:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.114 (still bad) 2011-Dec-14 05:10:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-14 05:10:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.063 1.002 1.078 1.112 2011-Dec-14 05:10:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.113 0.961 0.999 1.044 2011-Dec-14 05:10:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 1.026 1.078 1.029 2011-Dec-14 05:10:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.992 0.026 1.078 0.026 2011-Dec-14 05:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.114 (still bad) 2011-Dec-14 05:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2011-Dec-14 05:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.115 (still bad) 2011-Dec-14 05:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.113 (still bad) 2011-Dec-14 05:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.116 (still bad) 2011-Dec-14 05:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.112 (still bad) 2011-Dec-14 05:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.114 (still bad) 2011-Dec-14 05:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2011-Dec-14 05:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.114 (still bad) 2011-Dec-14 05:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.113 (still bad) 2011-Dec-14 05:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2011-Dec-14 05:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.114 (still bad) 2011-Dec-14 05:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2011-Dec-14 05:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2011-Dec-14 05:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2011-Dec-14 05:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.113 (still bad) 2011-Dec-14 05:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2011-Dec-14 05:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.114 (still bad) 2011-Dec-14 05:10:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2011-Dec-14 05:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2011-Dec-14 05:10:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2011-Dec-14 05:10:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2011-Dec-14 05:10:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2011-Dec-14 05:10:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2011-Dec-14 05:11:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2011-Dec-14 05:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-14 05:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-14 05:11:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2011-Dec-14 05:11:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2011-Dec-14 05:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-14 05:11:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2011-Dec-14 05:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-14 05:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:11:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2011-Dec-14 05:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-14 05:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-14 05:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-14 05:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-14 05:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-14 05:11:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2011-Dec-14 05:11:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.064 1.002 1.082 1.119 2011-Dec-14 05:11:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.112 0.960 1.001 1.045 2011-Dec-14 05:11:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 1.028 1.078 1.030 2011-Dec-14 05:11:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.992 0.019 1.079 0.019 2011-Dec-14 05:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 05:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 05:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 05:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 05:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-14 05:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-14 05:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2011-Dec-14 05:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.113 (still bad) 2011-Dec-14 05:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.112 (still bad) 2011-Dec-14 05:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2011-Dec-14 05:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.114 (still bad) 2011-Dec-14 05:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2011-Dec-14 05:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2011-Dec-14 05:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.114 (still bad) 2011-Dec-14 05:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.113 (still bad) 2011-Dec-14 05:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2011-Dec-14 05:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.113 (still bad) 2011-Dec-14 05:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.114 (still bad) 2011-Dec-14 05:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-14 05:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 05:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 05:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-14 05:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-14 05:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:12:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-14 05:12:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.062 1.000 1.079 1.115 2011-Dec-14 05:12:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.113 0.962 1.000 1.045 2011-Dec-14 05:12:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 1.030 1.083 1.032 2011-Dec-14 05:12:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.992 0.020 1.080 0.020 2011-Dec-14 05:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-14 05:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-14 05:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-14 05:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-14 05:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2011-Dec-14 05:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-14 05:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-14 05:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-14 05:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-14 05:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-14 05:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-14 05:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 05:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-14 05:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 05:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 05:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-14 05:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 05:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2011-Dec-14 05:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2011-Dec-14 05:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2011-Dec-14 05:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.113 (still bad) 2011-Dec-14 05:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.113 (still bad) 2011-Dec-14 05:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2011-Dec-14 05:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-14 05:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-14 05:13:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-14 05:13:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.065 1.002 1.084 1.119 2011-Dec-14 05:13:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.117 0.961 1.006 1.051 2011-Dec-14 05:13:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.787 1.027 1.082 1.033 2011-Dec-14 05:13:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.994 0.021 1.081 0.021 2011-Dec-14 05:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2011-Dec-14 05:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2011-Dec-14 05:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2011-Dec-14 05:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2011-Dec-14 05:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2011-Dec-14 05:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-14 05:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2011-Dec-14 05:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2011-Dec-14 05:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-14 05:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-14 05:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.114 (still bad) 2011-Dec-14 05:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.112 (still bad) 2011-Dec-14 05:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2011-Dec-14 05:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.112 (still bad) 2011-Dec-14 05:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.112 (still bad) 2011-Dec-14 05:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.114 (still bad) 2011-Dec-14 05:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 05:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 05:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 05:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-14 05:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-14 05:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-14 05:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2011-Dec-14 05:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-14 05:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2011-Dec-14 05:14:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-14 05:14:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.064 1.002 1.081 1.114 2011-Dec-14 05:14:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.113 0.961 1.002 1.048 2011-Dec-14 05:14:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.787 1.028 1.082 1.032 2011-Dec-14 05:14:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.991 0.024 1.078 0.024 2011-Dec-14 05:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.114 (still bad) 2011-Dec-14 05:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2011-Dec-14 05:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.113 (still bad) 2011-Dec-14 05:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.116 (still bad) 2011-Dec-14 05:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-14 05:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2011-Dec-14 05:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2011-Dec-14 05:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2011-Dec-14 05:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2011-Dec-14 05:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2011-Dec-14 05:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 05:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2011-Dec-14 05:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.113 (still bad) 2011-Dec-14 05:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2011-Dec-14 05:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.114 (still bad) 2011-Dec-14 05:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-14 05:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 05:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2011-Dec-14 05:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2011-Dec-14 05:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2011-Dec-14 05:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2011-Dec-14 05:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.114 (still bad) 2011-Dec-14 05:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2011-Dec-14 05:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2011-Dec-14 05:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2011-Dec-14 05:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2011-Dec-14 05:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.114 (still bad) 2011-Dec-14 05:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2011-Dec-14 05:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-14 05:15:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-14 05:15:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.063 1.003 1.080 1.114 2011-Dec-14 05:15:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.113 0.961 1.001 1.046 2011-Dec-14 05:15:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.789 1.029 1.081 1.033 2011-Dec-14 05:15:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.992 0.024 1.079 0.025 2011-Dec-14 05:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.114 (still bad) 2011-Dec-14 05:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.115 (still bad) 2011-Dec-14 05:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.113 (still bad) 2011-Dec-14 05:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.115 (still bad) 2011-Dec-14 05:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-14 05:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-14 05:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-14 05:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-14 05:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-14 05:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2011-Dec-14 05:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2011-Dec-14 05:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2011-Dec-14 05:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.116 (still bad) 2011-Dec-14 05:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2011-Dec-14 05:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.116 (still bad) 2011-Dec-14 05:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2011-Dec-14 05:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 05:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 05:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 05:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 05:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-14 05:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-14 05:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 05:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-14 05:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 05:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-14 05:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-14 05:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 05:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-14 05:16:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-14 05:16:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.065 1.003 1.078 1.114 2011-Dec-14 05:16:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.115 0.963 1.000 1.046 2011-Dec-14 05:16:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.787 1.030 1.084 1.033 2011-Dec-14 05:16:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.991 0.021 1.078 0.021 2011-Dec-14 05:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-14 05:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-14 05:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 05:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2011-Dec-14 05:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-14 05:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 05:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 05:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 05:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 05:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 05:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-14 05:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 05:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 05:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 05:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 05:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-14 05:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-14 05:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-14 05:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-14 05:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-14 05:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 05:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-14 05:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2011-Dec-14 05:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-14 05:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-14 05:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2011-Dec-14 05:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2011-Dec-14 05:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2011-Dec-14 05:17:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-14 05:17:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.066 1.005 1.081 1.116 2011-Dec-14 05:17:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.117 0.964 1.002 1.047 2011-Dec-14 05:17:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.821 1.100 1.088 1.036 2011-Dec-14 05:17:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.994 0.023 1.080 0.023 2011-Dec-14 05:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2011-Dec-14 05:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2011-Dec-14 05:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-14 05:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-14 05:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-14 05:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-14 05:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-14 05:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2011-Dec-14 05:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-14 05:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-14 05:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-14 05:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-14 05:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-14 05:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-14 05:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-14 05:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-14 05:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-14 05:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-14 05:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-14 05:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-14 05:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-14 05:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-14 05:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-14 05:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-14 05:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-14 05:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-14 05:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-14 05:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-14 05:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-14 05:18:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2011-Dec-14 05:18:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.060 1.001 1.080 1.116 2011-Dec-14 05:18:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.117 0.964 1.001 1.046 2011-Dec-14 05:18:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 1.028 1.083 1.034 2011-Dec-14 05:18:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.991 0.020 1.078 0.019 2011-Dec-14 05:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-14 05:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2011-Dec-14 05:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-14 05:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 05:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2011-Dec-14 05:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2011-Dec-14 05:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2011-Dec-14 05:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2011-Dec-14 05:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-14 05:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-14 05:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-14 05:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 05:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-14 05:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-14 05:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 05:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 05:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-14 05:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-14 05:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-14 05:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2011-Dec-14 05:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-14 05:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2011-Dec-14 05:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.113 (still bad) 2011-Dec-14 05:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.114 (still bad) 2011-Dec-14 05:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.113 (still bad) 2011-Dec-14 05:19:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-14 05:19:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.060 1.000 1.076 1.114 2011-Dec-14 05:19:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.111 0.960 1.000 1.045 2011-Dec-14 05:19:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.787 1.027 1.085 1.036 2011-Dec-14 05:19:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.992 0.023 1.079 0.023 2011-Dec-14 05:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.113 (still bad) 2011-Dec-14 05:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.113 (still bad) 2011-Dec-14 05:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.113 (still bad) 2011-Dec-14 05:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.114 (still bad) 2011-Dec-14 05:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.114 (still bad) 2011-Dec-14 05:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.113 (still bad) 2011-Dec-14 05:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.114 (still bad) 2011-Dec-14 05:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2011-Dec-14 05:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2011-Dec-14 05:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.114 (still bad) 2011-Dec-14 05:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.114 (still bad) 2011-Dec-14 05:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.112 (still bad) 2011-Dec-14 05:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.114 (still bad) 2011-Dec-14 05:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-14 05:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 05:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-14 05:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-14 05:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-14 05:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 05:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-14 05:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-14 05:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.114 (still bad) 2011-Dec-14 05:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.113 (still bad) 2011-Dec-14 05:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.114 (still bad) 2011-Dec-14 05:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.114 (still bad) 2011-Dec-14 05:20:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-14 05:20:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 1.001 1.078 1.115 2011-Dec-14 05:20:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.112 0.959 1.002 1.045 2011-Dec-14 05:20:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.789 1.034 1.082 1.032 2011-Dec-14 05:20:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.992 0.024 1.079 0.024 2011-Dec-14 05:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.115 (still bad) 2011-Dec-14 05:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-14 05:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 05:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-14 05:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 05:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 05:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-14 05:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-14 05:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-14 05:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-14 05:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 05:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-14 05:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-14 05:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 05:21:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-14 05:21:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.067 1.007 1.085 1.123 2011-Dec-14 05:21:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.129 0.977 1.004 1.050 2011-Dec-14 05:21:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.791 1.034 1.088 1.036 2011-Dec-14 05:21:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.996 0.020 1.084 0.020 2011-Dec-14 05:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2011-Dec-14 05:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 05:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 05:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 05:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-14 05:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 05:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 05:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 05:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 05:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-14 05:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 05:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2011-Dec-14 05:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 05:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 05:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 05:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 05:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-14 05:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 05:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-14 05:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 05:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-14 05:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 05:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 05:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 05:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 05:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 05:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-14 05:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 05:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-14 05:22:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-14 05:22:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.067 1.009 1.083 1.118 2011-Dec-14 05:22:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.119 0.968 1.005 1.052 2011-Dec-14 05:22:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.791 1.033 1.086 1.037 2011-Dec-14 05:22:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.998 0.022 1.085 0.022 2011-Dec-14 05:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 05:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-14 05:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 05:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-14 05:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-14 05:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2011-Dec-14 05:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-14 05:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-14 05:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-14 05:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-14 05:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 05:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 05:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-14 05:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-14 05:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-14 05:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-14 05:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 05:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-14 05:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2011-Dec-14 05:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2011-Dec-14 05:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-14 05:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2011-Dec-14 05:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2011-Dec-14 05:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2011-Dec-14 05:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-14 05:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-14 05:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2011-Dec-14 05:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-14 05:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-14 05:23:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-14 05:23:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.010 1.089 1.124 2011-Dec-14 05:23:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.124 0.971 1.009 1.053 2011-Dec-14 05:23:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.789 1.033 1.087 1.039 2011-Dec-14 05:23:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.000 0.022 1.088 0.022 2011-Dec-14 05:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 05:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 05:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 05:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 05:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 05:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 05:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-14 05:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 05:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2011-Dec-14 05:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-14 05:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-14 05:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-14 05:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 05:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-14 05:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-14 05:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-14 05:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-14 05:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-14 05:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-14 05:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-14 05:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-14 05:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-14 05:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-14 05:24:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-14 05:24:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.065 1.004 1.083 1.118 2011-Dec-14 05:24:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.111 0.966 1.011 1.057 2011-Dec-14 05:24:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 1.030 1.082 1.035 2011-Dec-14 05:24:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.994 0.020 1.080 0.020 2011-Dec-14 05:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-14 05:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-14 05:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-14 05:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-14 05:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-14 05:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-14 05:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-14 05:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-14 05:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-14 05:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-14 05:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-14 05:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-14 05:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-14 05:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-14 05:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-14 05:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-14 05:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-14 05:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-14 05:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-14 05:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-14 05:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-14 05:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-14 05:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-14 05:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2011-Dec-14 05:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2011-Dec-14 05:25:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2011-Dec-14 05:25:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.065 1.006 1.084 1.117 2011-Dec-14 05:25:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.133 0.984 1.003 1.048 2011-Dec-14 05:25:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.788 1.031 1.086 1.037 2011-Dec-14 05:25:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.994 0.019 1.080 0.019 2011-Dec-14 05:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2011-Dec-14 05:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2011-Dec-14 05:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2011-Dec-14 05:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2011-Dec-14 05:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-14 05:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2011-Dec-14 05:25:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 05:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-14 05:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-14 05:26:02 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-14 05:26:02 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-14 05:26:02 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-14 05:26:02 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2011-Dec-14 05:26:02 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-14 05:26:02 LOG5 end_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2011-Dec-14 05:26:02 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-14 05:26:02 LOG5 finish_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2011-Dec-14 05:26:02 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-14 05:26:02 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-14 05:26:02 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-14 05:26:02 LOG5 end_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2011-Dec-14 05:26:02 COMMAND run_command_line: EXECUTING command 34: 'ENDIF' 2011-Dec-14 05:26:02 COMMAND run_command_line: EXECUTING command 37: 'IF LSTSLEW(AGES3193_p3_143) < 103310 THEN' 2011-Dec-14 05:26:02 LOG3 is_if_valid: Current source data: up 104.2 8.7 UP - - 47 1.9 2011-Dec-14 05:26:02 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_143) < 103310 2011-Dec-14 05:26:02 INFO5 is_if_valid: Condition parsed as: 10.528713666666667 < 10.552777777777779 2011-Dec-14 05:26:02 COMMAND run_command_line: EXECUTING command 38: 'FIXEDDRIFT az=103.25 alfaangle=-82.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_143 ra=95300.00 dec=202000.00' 2011-Dec-14 05:26:02 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-14 05:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-14 05:26:03 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-14 05:26:03 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 103.25 -82.4 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_143 95300.00 202000.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-14 05:26:03 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-14 05:26:03 LOG5 begin_task: Level: (2) ID = <10193> Status = 0 0 0 0 ok 2011-Dec-14 05:26:03 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_141' 2011-Dec-14 05:26:03 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-14 05:26:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_143} 2011-Dec-14 05:26:03 INFO3 fixed_driftmap: Sending telescope to Az = 103.25 and ZA = 9.51 2011-Dec-14 05:26:03 LOG3 track_source: Calling 'track_source AGES3193_p3_143 103.25 9.5091793243 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-14 05:26:03 START begin_task: Starting task 'sending tracking commands' 2011-Dec-14 05:26:03 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2011-Dec-14 05:26:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_143} INFO {Slewing to source 'AGES3193_p3_143' ...} 2011-Dec-14 05:26:03 INFO1 track_source: Starting to track AGES3193_p3_143 2011-Dec-14 05:26:03 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_143" 2011-Dec-14 05:26:03 LOG3 vw_send: To DATATAKING: set ra 103.25 2011-Dec-14 05:26:03 LOG3 vw_send: To DATATAKING: set dec 9.5091793243 2011-Dec-14 05:26:03 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-14 05:26:03 LOG3 vw_send: To DATATAKING: pnt tr 103.25 9.5091793243 -CF 2011-Dec-14 05:26:03 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 05:26:03 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-14 05:26:03 LOG5 finish_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2011-Dec-14 05:26:03 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-14 05:26:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 05:26:03 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-14 05:26:03 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2011-Dec-14 05:26:03 START begin_task: Starting task 'rotate ALFA to -82.4 degrees' 2011-Dec-14 05:26:03 LOG5 begin_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2011-Dec-14 05:26:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -82.4 degrees ...} 2011-Dec-14 05:26:03 INFO2 rotate_alfa: ALFA commanded to -82.4 degrees 2011-Dec-14 05:26:03 LOG3 sock_errsend: To ALFAMOTOR: POSITION -82.4 REPLY 2011-Dec-14 05:26:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-14 05:26:03 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-14 05:26:03 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2011-Dec-14 05:26:03 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_143" 2011-Dec-14 05:26:03 LOG4 got_cormsg: From DATATAKING: set ra 103.25 2011-Dec-14 05:26:03 LOG4 got_cormsg: From DATATAKING: set dec 9.5091793243 2011-Dec-14 05:26:03 LOG4 got_cormsg: From DATATAKING: vw% 103.25 2011-Dec-14 05:26:03 LOG4 got_cormsg: From DATATAKING: vw% 9.5091793243 2011-Dec-14 05:26:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:26:03 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-14 05:26:03 LOG4 got_cormsg: From DATATAKING: pnt tr 103.25 9.5091793243 -CF 2011-Dec-14 05:26:03 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 05:26:03 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-14 05:26:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:27:32 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-14 05:27:32 INFO3 alfa_motor: ALFA rotator in-position -82.40 degrees 2011-Dec-14 05:27:32 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-14 05:27:32 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2011-Dec-14 05:27:32 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-14 05:27:32 STOP finish_task: Finishing task 'rotate ALFA to -82.4 degrees' 2011-Dec-14 05:27:32 LOG5 finish_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2011-Dec-14 05:27:32 INFO2 finish_task: DONE finished configuration: rotating ALFA to -82.4 degrees 2011-Dec-14 05:27:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 05:27:32 STOP end_task: Finishing task 'rotate ALFA to -82.4 degrees' with status 'OK' 2011-Dec-14 05:27:32 LOG5 end_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2011-Dec-14 05:27:32 START begin_task: Starting task 'waiting on telescope' 2011-Dec-14 05:27:32 LOG5 begin_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2011-Dec-14 05:27:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-14 05:27:33 LOG3 waittrk: Start waittrk 5 2011-Dec-14 05:27:33 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-14 05:27:33 LOG5 begin_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2011-Dec-14 05:27:38 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-14 05:27:38 LOG5 end_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2011-Dec-14 05:27:38 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-14 05:27:38 LOG5 begin_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2011-Dec-14 05:28:19 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-14 05:28:19 LOG5 end_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2011-Dec-14 05:28:19 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-14 05:28:19 INFO2 waittrk: Now tracking AGES3193_p3_143 2011-Dec-14 05:28:19 LOG4 waittrk: Current telescope position: Az = 103.05 ZA = 9.51 2011-Dec-14 05:28:19 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-14 05:28:19 LOG5 finish_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2011-Dec-14 05:28:19 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-14 05:28:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 05:28:19 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-14 05:28:19 LOG5 end_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2011-Dec-14 05:28:19 START begin_task: Starting task 'selecting calibration type' 2011-Dec-14 05:28:19 LOG5 begin_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2011-Dec-14 05:28:19 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-14 05:28:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-14 05:28:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 05:28:19 START begin_task: Starting task 'waiting on setcal' 2011-Dec-14 05:28:19 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2011-Dec-14 05:28:19 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-14 05:28:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 05:28:20 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:28:20 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-14 05:28:20 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-14 05:28:20 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2011-Dec-14 05:28:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-14 05:28:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-14 05:28:20 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-14 05:28:20 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-14 05:28:20 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2011-Dec-14 05:28:20 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:28:20 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-14 05:28:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-14 05:28:20 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2011-Dec-14 05:28:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-14 05:28:20 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-14 05:28:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-14 05:28:20 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-14 05:28:20 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-14 05:28:20 LOG5 begin_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2011-Dec-14 05:28:20 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-14 05:28:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-14 05:28:20 LOG5 end_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2011-Dec-14 05:28:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-14 05:28:20 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-14 05:28:20 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-14 05:28:20 LOG5 end_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2011-Dec-14 05:28:20 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Dec-14 05:28:20 INFO2 astwait: Waiting for 2 seconds from 09:28:20 to 09:28:22 UTC ... 2011-Dec-14 05:28:20 LOG4 send_obs_status: To obs_status: <1> TASKTIME 2 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-14 05:28:20 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Dec-14 05:28:20 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2011-Dec-14 05:28:22 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Dec-14 05:28:22 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2011-Dec-14 05:28:22 INFO3 astwait: Finished waiting 2011-Dec-14 05:28:22 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-14 05:28:22 LOG5 dopset_later: Calling 'dopset_later 60.602590293087019' 2011-Dec-14 05:28:22 INFO3 dopset_later: Setting Doppler correction for 05:29:22 (60.6 seconds from now) 2011-Dec-14 05:28:22 LOG5 antvel: Calling 'antvel 103.250000 9.509179 F Heliocentric 60.602590293087019' 2011-Dec-14 05:28:22 LOG2 antvel: Transforming current Az = 103.25 ZA = 9.51 to apparent RA = 09:53:41.4 Dec = +20:16:23.3 2011-Dec-14 05:28:22 LOG2 antvel: Parameters to Doppler: Heliocentric 34162 2011 348 0.0 2011-Dec-14 05:28:22 INFO5 antvel: Computed antenna velocity: -26.25162 km/s 2011-Dec-14 05:28:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-26.2516214027 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-14 05:28:22 INFO4 dopset_gen: New sky frequencies: 1381.364389 1381.364389 1381.364389 1381.364389 1381.364389 1381.364389 1381.364389 1381.364389 1381.364389 2011-Dec-14 05:28:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.364389 sky0=1381.364389 sky1=1381.364389 sky2=1381.364389 sky3=1381.364389 sky4=1381.364389 sky5=1381.364389 sky6=1381.364389 sky7=1381.364389 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-14 05:28:22 LOG2 dopset_gen: Result from 'sky2syn': 1631.364389 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-14 05:28:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631364389.0} 2011-Dec-14 05:28:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 05:28:22 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-14 05:28:22 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-14 05:28:22 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.9 Dec = +20:19:46.7 2011-Dec-14 05:28:22 LOG3 track_source: Calling 'track_source AGES3193_p3_143 095203.9 201946.7 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-14 05:28:22 START begin_task: Starting task 'sending tracking commands' 2011-Dec-14 05:28:22 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2011-Dec-14 05:28:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_143} INFO {Slewing to source 'AGES3193_p3_143' ...} 2011-Dec-14 05:28:22 INFO1 track_source: Starting to track AGES3193_p3_143 2011-Dec-14 05:28:22 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_143" 2011-Dec-14 05:28:22 LOG3 vw_send: To DATATAKING: set ra 095203.9 2011-Dec-14 05:28:22 LOG3 vw_send: To DATATAKING: set dec 201946.7 2011-Dec-14 05:28:22 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-14 05:28:22 LOG3 vw_send: To DATATAKING: pnt tr 095203.9 201946.7 -CJ 2011-Dec-14 05:28:22 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 05:28:22 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-14 05:28:22 LOG5 finish_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2011-Dec-14 05:28:22 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-14 05:28:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 05:28:22 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-14 05:28:22 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2011-Dec-14 05:28:22 START begin_task: Starting task 'waiting on telescope' 2011-Dec-14 05:28:22 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2011-Dec-14 05:28:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-14 05:28:22 LOG3 waittrk: Start waittrk 5 2011-Dec-14 05:28:22 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-14 05:28:22 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2011-Dec-14 05:28:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631364389.0} 2011-Dec-14 05:28:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 05:28:22 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_143" 2011-Dec-14 05:28:22 LOG4 got_cormsg: From DATATAKING: set ra 095203.9 2011-Dec-14 05:28:22 LOG4 got_cormsg: From DATATAKING: set dec 201946.7 2011-Dec-14 05:28:22 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-14 05:28:22 LOG4 got_cormsg: From DATATAKING: vw% 095203.9 2011-Dec-14 05:28:22 LOG4 got_cormsg: From DATATAKING: vw% 201946.7 2011-Dec-14 05:28:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:28:22 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-14 05:28:22 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.9 201946.7 -CJ 2011-Dec-14 05:28:22 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 05:28:22 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-14 05:28:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:28:27 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-14 05:28:27 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2011-Dec-14 05:28:27 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-14 05:28:27 LOG5 begin_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2011-Dec-14 05:28:29 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-14 05:28:29 LOG5 end_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2011-Dec-14 05:28:29 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-14 05:28:29 INFO2 waittrk: Now tracking AGES3193_p3_143 2011-Dec-14 05:28:29 LOG4 waittrk: Current telescope position: Az = 103.01 ZA = 9.53 2011-Dec-14 05:28:29 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-14 05:28:29 LOG5 finish_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2011-Dec-14 05:28:29 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-14 05:28:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 05:28:29 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-14 05:28:29 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2011-Dec-14 05:28:29 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-14 05:28:29 LOG5 begin_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2011-Dec-14 05:28:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-14 05:28:29 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-14 05:28:29 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-14 05:28:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-14 05:28:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 05:28:29 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-14 05:28:29 LOG5 begin_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2011-Dec-14 05:28:30 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-14 05:28:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 05:28:31 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:28:31 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-14 05:28:31 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-14 05:28:31 LOG5 end_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2011-Dec-14 05:28:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-14 05:28:31 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-14 05:28:31 LOG5 begin_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2011-Dec-14 05:28:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-14 05:28:31 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-14 05:28:31 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-14 05:28:31 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-14 05:28:31 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-14 05:28:31 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-14 05:28:31 LOG5 begin_task: Level: (5) ID = <10212> Status = 0 0 0 0 ok 2011-Dec-14 05:28:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-14 05:28:31 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:28:31 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 8 5 dB 2011-Dec-14 05:28:31 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 3 dB 2011-Dec-14 05:28:31 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 4 dB --- beam 3: 2 2 dB 2011-Dec-14 05:28:32 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2011-Dec-14 05:28:32 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-14 05:28:32 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-14 05:28:32 LOG5 end_task: Level: (5) ID = <10212> Status = 0 0 0 0 ok 2011-Dec-14 05:28:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.100 1.020 ALFA beam 1: 0.879 1.097 2011-Dec-14 05:28:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.118 0.961 ALFA beam 3: 1.008 1.098 2011-Dec-14 05:28:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.798 1.095 ALFA beam 5: 0.919 1.079 2011-Dec-14 05:28:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.050 0.014 ALFA beam 7: 0.914 0.014 2011-Dec-14 05:28:32 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-14 05:28:32 LOG5 finish_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2011-Dec-14 05:28:32 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-14 05:28:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 05:28:32 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-14 05:28:32 LOG5 end_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2011-Dec-14 05:28:32 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-14 05:28:32 LOG5 begin_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2011-Dec-14 05:28:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-14 05:28:32 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-14 05:28:32 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-14 05:28:32 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-14 05:28:32 LOG5 begin_task: Level: (5) ID = <10214> Status = 0 0 0 0 ok 2011-Dec-14 05:28:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-14 05:28:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 1.020 0.879 1.097 2011-Dec-14 05:28:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.118 0.961 1.008 1.098 2011-Dec-14 05:28:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.798 1.095 0.919 1.079 2011-Dec-14 05:28:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.050 0.014 0.914 0.014 2011-Dec-14 05:28:37 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.5 27.7 B 29.7 29.7 mn:A 0.0 -0.1 B -0.4 -0.4 gn: 11 11 2011-Dec-14 05:28:37 INFO3 from_mock: From MOCK: b0s1g0 rms:A 32.5 31.1 B 27.6 29.1 mn:A 0.1 -0.3 B -0.8 0.0 gn: 12 11 2011-Dec-14 05:28:37 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.2 28.2 B 31.9 28.0 mn:A 0.3 0.7 B 0.0 -0.0 gn: 7 11 2011-Dec-14 05:28:37 INFO3 from_mock: From MOCK: b1s1g0 rms:A 29.9 27.6 B 30.3 30.3 mn:A -0.2 -0.2 B 0.6 0.2 gn: 8 10 2011-Dec-14 05:28:37 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.8 30.9 B 27.8 29.1 mn:A 0.0 -0.3 B 0.5 0.0 gn: 11 11 2011-Dec-14 05:28:37 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.3 29.6 B 32.3 30.0 mn:A 0.3 -0.2 B -0.0 0.1 gn: 11 12 2011-Dec-14 05:28:37 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.7 31.5 B 30.9 27.6 mn:A 0.4 -0.3 B 0.0 -0.3 gn: 13 12 2011-Dec-14 05:28:37 INFO3 from_mock: From MOCK: b3s1g0 rms:A 29.8 29.1 B 29.4 30.6 mn:A -0.3 0.3 B 0.1 0.3 gn: 12 12 2011-Dec-14 05:28:38 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.8 28.9 B 31.6 31.8 mn:A -0.3 -0.3 B -0.4 -0.0 gn: 13 12 2011-Dec-14 05:28:38 INFO3 from_mock: From MOCK: b4s1g0 rms:A 31.9 28.9 B 30.3 29.2 mn:A -0.1 -0.0 B -0.4 0.2 gn: 16 13 2011-Dec-14 05:28:38 INFO3 from_mock: From MOCK: b5s0g0 rms:A 28.9 27.8 B 30.4 30.4 mn:A 0.7 0.3 B -0.1 0.5 gn: 12 11 2011-Dec-14 05:28:38 INFO3 from_mock: From MOCK: b5s1g0 rms:A 29.1 28.9 B 30.6 30.3 mn:A -0.3 0.2 B -0.1 0.0 gn: 12 11 2011-Dec-14 05:28:38 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.1 29.4 B 14.2 14.6 mn:A -0.4 0.2 B 0.4 -0.4 gn: 13 31 2011-Dec-14 05:28:38 INFO3 from_mock: From MOCK: b6s1g0 rms:A 32.7 29.7 B 11.2 10.8 mn:A 0.6 0.6 B 0.2 0.2 gn: 14 31 2011-Dec-14 05:28:38 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-14 05:28:38 LOG5 end_task: Level: (5) ID = <10214> Status = 0 0 0 0 ok 2011-Dec-14 05:28:38 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-14 05:28:38 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-14 05:28:38 LOG5 finish_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2011-Dec-14 05:28:38 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-14 05:28:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 05:28:38 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-14 05:28:38 LOG5 end_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2011-Dec-14 05:28:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-14 05:28:38 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-14 05:28:38 LOG5 finish_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2011-Dec-14 05:28:38 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-14 05:28:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 05:28:38 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-14 05:28:38 LOG5 end_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2011-Dec-14 05:28:38 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 05:28:38 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 05:28:38 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 05:28:38 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 05:28:38 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-14 05:28:38 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-14 05:28:38 LOG5 begin_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2011-Dec-14 05:28:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-14 05:28:38 START begin_task: Starting task 'selecting calibration type' 2011-Dec-14 05:28:38 LOG5 begin_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2011-Dec-14 05:28:38 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-14 05:28:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-14 05:28:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 05:28:38 START begin_task: Starting task 'waiting on setcal' 2011-Dec-14 05:28:38 LOG5 begin_task: Level: (5) ID = <10217> Status = 0 0 0 0 ok 2011-Dec-14 05:28:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Ellioty Gonzalez' 2011-Dec-14 05:28:38 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-14 05:28:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 05:28:38 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:28:38 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-14 05:28:38 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-14 05:28:38 LOG5 end_task: Level: (5) ID = <10217> Status = 0 0 0 0 ok 2011-Dec-14 05:28:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-14 05:28:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-14 05:28:38 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-14 05:28:38 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-14 05:28:38 LOG5 begin_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2011-Dec-14 05:28:38 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:28:38 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-14 05:28:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-14 05:28:38 LOG5 end_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2011-Dec-14 05:28:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-14 05:28:38 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-14 05:28:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-14 05:28:38 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-14 05:28:38 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-14 05:28:38 LOG5 begin_task: Level: (5) ID = <10219> Status = 0 0 0 0 ok 2011-Dec-14 05:28:38 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-14 05:28:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-14 05:28:38 LOG5 end_task: Level: (5) ID = <10219> Status = 0 0 0 0 ok 2011-Dec-14 05:28:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-14 05:28:38 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-14 05:28:38 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-14 05:28:38 LOG5 end_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2011-Dec-14 05:28:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-14 05:28:39 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-14 05:28:39 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-14 05:28:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-14 05:28:39 LOG5 begin_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2011-Dec-14 05:28:39 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-14 05:28:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-14 05:28:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-14 05:28:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-14 05:28:39 LOG5 end_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2011-Dec-14 05:28:39 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-14 05:28:39 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-14 05:28:39 LOG5 begin_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2011-Dec-14 05:28:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-14 05:28:39 LOG5 log_alfabeam: Parameters: 9.8677499999999991 20.329638888888891 10.540777 2011.9533968996375 -82.400047 2011-Dec-14 05:28:39 LOG4 log_alfabeam: ALFABEAM 0 9.867750000000004 20.329638888888894 2011-Dec-14 05:28:39 LOG4 log_alfabeam: ALFABEAM 1 9.865961336331665 20.420145312098093 2011-Dec-14 05:28:39 LOG4 log_alfabeam: ALFABEAM 2 9.860492101421119 20.359756551283109 2011-Dec-14 05:28:39 LOG4 log_alfabeam: ALFABEAM 3 9.862324668713345 20.268892527942857 2011-Dec-14 05:28:39 LOG4 log_alfabeam: ALFABEAM 4 9.869597032249457 20.239702693876090 2011-Dec-14 05:28:39 LOG4 log_alfabeam: ALFABEAM 5 9.875009365927676 20.299712137989626 2011-Dec-14 05:28:39 LOG4 log_alfabeam: ALFABEAM 6 9.873205729858222 20.389292206812751 2011-Dec-14 05:28:39 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-14 05:28:39 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-14 05:28:39 LOG3 take_mock_data: PSET configuration: obsnm=Ellioty Gonzalez 2011-Dec-14 05:28:39 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_143 2011-Dec-14 05:28:39 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-14 05:28:39 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-14 05:28:39 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-14 05:28:39 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-14 05:28:39 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-14 05:28:39 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-14 05:28:39 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-14 05:28:39 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-14 05:28:39 LOG3 take_mock_data: PSET configuration: patternid=134800012 2011-Dec-14 05:28:39 LOG3 take_mock_data: PSET configuration: scanid=134800013 2011-Dec-14 05:28:39 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-14 05:28:39 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-14 05:28:39 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-14 05:28:39 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456364389.0 2011-Dec-14 05:28:39 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306364389.0 2011-Dec-14 05:28:39 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-14 05:28:39 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-14 05:28:39 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Ellioty Gonzalez:object=AGES3193_p3_143:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=134800012:scanid=134800013:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456364389.0:topobfreqhz=1306364389.0:filetype=1 2011-Dec-14 05:28:39 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-14 05:28:39 LOG5 begin_task: Level: (5) ID = <10222> Status = 0 0 0 0 ok 2011-Dec-14 05:28:39 LOG4 from_mock: From MOCK: psetok 2011-Dec-14 05:28:39 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-14 05:28:39 LOG5 end_task: Level: (5) ID = <10222> Status = 0 0 0 0 ok 2011-Dec-14 05:28:39 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-14 05:28:39 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-14 05:28:39 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-14 05:28:39 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-14 05:28:39 LOG5 begin_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2011-Dec-14 05:28:39 NOTE WAPPDATA-new_file: New FITS file: wapp.20111214.a2048.0004.fits 2011-Dec-14 05:28:39 LOG4 from_mock: From MOCK: starok 2011-Dec-14 05:28:39 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-14 05:28:39 LOG5 end_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2011-Dec-14 05:28:39 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-14 05:28:39 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134800013 2011-Dec-14 05:28:39 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-14 05:28:39 LOG5 begin_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2011-Dec-14 05:28:39 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111214.a2048.0004.fits} 2011-Dec-14 05:28:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 05:28:39 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-14 05:28:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-14 05:28:39 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-14 05:28:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 34120.00 2011-Dec-14 05:28:41 INFO2 got_mock_message: Mock spectrometer start file number is 01200 2011-Dec-14 05:28:41 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-14 05:28:41 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-14 05:28:41 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-14 05:28:41 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-14 05:28:41 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-14 05:28:41 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-14 05:28:41 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-14 05:28:41 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-14 05:28:41 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-14 05:28:41 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-14 05:28:41 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-14 05:28:41 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-14 05:28:41 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:28:41 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:28:41 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:28:41 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:28:41 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:28:41 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:28:41 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:28:44 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:28:44.01 2011-Dec-14 05:28:44 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323854924.01 Wed Dec 14 05:28:44 2011 2011-Dec-14 05:28:44 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-14 05:28:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.364389 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 05:28:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.364389 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:28:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.364389 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:28:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.364389 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:28:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.364389 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:28:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.364389 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 05:28:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.364389 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 05:28:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.364389 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 05:28:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.364389 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 05:28:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 05:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.527 (still bad) 2011-Dec-14 05:28:50 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-14 05:28:50 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-14 05:28:50 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-14 05:28:50 LOG5 end_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2011-Dec-14 05:28:50 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-14 05:28:50 LOG5 end_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2011-Dec-14 05:28:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-14 05:28:50 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-14 05:28:50 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-14 05:28:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-14 05:28:50 LOG5 begin_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2011-Dec-14 05:28:50 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-14 05:28:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-14 05:28:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-14 05:28:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-14 05:28:50 LOG5 end_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2011-Dec-14 05:28:50 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-14 05:28:50 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-14 05:28:50 LOG5 begin_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2011-Dec-14 05:28:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-14 05:28:50 LOG5 log_alfabeam: Parameters: 9.8677499999999991 20.329638888888891 10.543841 2011.9533972482066 -82.400047 2011-Dec-14 05:28:50 LOG4 log_alfabeam: ALFABEAM 0 9.867749999999999 20.329638888888894 2011-Dec-14 05:28:50 LOG4 log_alfabeam: ALFABEAM 1 9.865954492320011 20.420117766014233 2011-Dec-14 05:28:50 LOG4 log_alfabeam: ALFABEAM 2 9.860489866874438 20.359649589728065 2011-Dec-14 05:28:50 LOG4 log_alfabeam: ALFABEAM 3 9.862329110568462 20.268815425955122 2011-Dec-14 05:28:50 LOG4 log_alfabeam: ALFABEAM 4 9.869603554183040 20.239728503001309 2011-Dec-14 05:28:50 LOG4 log_alfabeam: ALFABEAM 5 9.875011571244361 20.299817956915749 2011-Dec-14 05:28:50 LOG4 log_alfabeam: ALFABEAM 6 9.873201250058738 20.389374506855486 2011-Dec-14 05:28:50 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-14 05:28:50 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-14 05:28:50 LOG3 take_mock_data: PSET configuration: obsnm=Ellioty Gonzalez 2011-Dec-14 05:28:50 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_143 2011-Dec-14 05:28:50 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-14 05:28:50 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-14 05:28:50 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-14 05:28:50 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-14 05:28:50 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-14 05:28:50 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-14 05:28:50 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-14 05:28:50 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-14 05:28:50 LOG3 take_mock_data: PSET configuration: patternid=134800012 2011-Dec-14 05:28:50 LOG3 take_mock_data: PSET configuration: scanid=134800014 2011-Dec-14 05:28:50 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-14 05:28:50 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-14 05:28:50 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-14 05:28:50 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456364389.0 2011-Dec-14 05:28:50 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306364389.0 2011-Dec-14 05:28:50 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-14 05:28:50 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-14 05:28:50 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Ellioty Gonzalez:object=AGES3193_p3_143:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=134800012:scanid=134800014:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456364389.0:topobfreqhz=1306364389.0:filetype=1 2011-Dec-14 05:28:50 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-14 05:28:50 LOG5 begin_task: Level: (5) ID = <10227> Status = 0 0 0 0 ok 2011-Dec-14 05:28:50 LOG4 from_mock: From MOCK: psetok 2011-Dec-14 05:28:50 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-14 05:28:50 LOG5 end_task: Level: (5) ID = <10227> Status = 0 0 0 0 ok 2011-Dec-14 05:28:50 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-14 05:28:50 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-14 05:28:50 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-14 05:28:50 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-14 05:28:50 LOG5 begin_task: Level: (5) ID = <10228> Status = 0 0 0 0 ok 2011-Dec-14 05:28:50 LOG4 from_mock: From MOCK: starok 2011-Dec-14 05:28:50 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-14 05:28:50 LOG5 end_task: Level: (5) ID = <10228> Status = 0 0 0 0 ok 2011-Dec-14 05:28:50 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-14 05:28:50 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134800014 2011-Dec-14 05:28:50 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-14 05:28:50 LOG5 begin_task: Level: (5) ID = <10229> Status = 0 0 0 0 ok 2011-Dec-14 05:28:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 05:28:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 34131.00 2011-Dec-14 05:28:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-14 05:28:51 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-14 05:28:51 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-14 05:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.547 (still bad) 2011-Dec-14 05:28:52 INFO2 got_mock_message: Mock spectrometer start file number is 01300 2011-Dec-14 05:28:52 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-14 05:28:52 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-14 05:28:52 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-14 05:28:52 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-14 05:28:52 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-14 05:28:52 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-14 05:28:52 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-14 05:28:52 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-14 05:28:52 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-14 05:28:52 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-14 05:28:52 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-14 05:28:52 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-14 05:28:52 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:28:52 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:28:52 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:28:52 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:28:52 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:28:52 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:28:52 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:28:55 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:28:55.01 2011-Dec-14 05:28:55 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323854935.01 Wed Dec 14 05:28:55 2011 2011-Dec-14 05:28:55 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-14 05:28:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.364389 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 05:28:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.364389 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:28:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.364389 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:28:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.364389 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:28:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.364389 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:28:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.364389 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 05:28:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.364389 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 05:28:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.364389 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 05:28:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.364389 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 05:28:56 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-14 05:28:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 05:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-14 05:29:01 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-14 05:29:01 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-14 05:29:01 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-14 05:29:01 LOG5 end_task: Level: (5) ID = <10229> Status = 0 0 0 0 ok 2011-Dec-14 05:29:01 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-14 05:29:01 LOG5 end_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2011-Dec-14 05:29:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-14 05:29:01 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-14 05:29:01 LOG5 finish_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2011-Dec-14 05:29:01 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-14 05:29:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 05:29:01 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-14 05:29:01 LOG5 end_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2011-Dec-14 05:29:01 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-14 05:29:01 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 103.25 and ZA = 9.51 2011-Dec-14 05:29:01 LOG3 track_source: Calling 'track_source AGES3193_p3_143 103.25 9.5091793243 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-14 05:29:01 START begin_task: Starting task 'sending tracking commands' 2011-Dec-14 05:29:01 LOG5 begin_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2011-Dec-14 05:29:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_143} INFO {Slewing to source 'AGES3193_p3_143' ...} 2011-Dec-14 05:29:01 INFO1 track_source: Starting to track AGES3193_p3_143 2011-Dec-14 05:29:01 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_143" 2011-Dec-14 05:29:01 LOG3 vw_send: To DATATAKING: set ra 103.25 2011-Dec-14 05:29:01 LOG3 vw_send: To DATATAKING: set dec 9.5091793243 2011-Dec-14 05:29:01 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-14 05:29:01 LOG3 vw_send: To DATATAKING: pnt tr 103.25 9.5091793243 -CF 2011-Dec-14 05:29:01 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 05:29:01 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-14 05:29:01 LOG5 finish_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2011-Dec-14 05:29:01 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-14 05:29:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 05:29:01 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-14 05:29:01 LOG5 end_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2011-Dec-14 05:29:01 LOG1 fixed_driftmap: Parameters: HA = +00:39:29.0 Start = 10:33:10.5 LST = 10:32:48.9 diff = 21.7 secs 2011-Dec-14 05:29:01 INFO2 fixed_driftmap: Waiting 19.7 seconds for RA 9:53:42 2011-Dec-14 05:29:01 INFO2 lstwait: Waiting for 19.6 secs from LST 10:32:49 to LST 10:33:09 ... 2011-Dec-14 05:29:01 LOG4 send_obs_status: To obs_status: <1> TASKTIME 19.608028299804872 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-14 05:29:01 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-14 05:29:01 LOG5 begin_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2011-Dec-14 05:29:01 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_143" 2011-Dec-14 05:29:01 LOG4 got_cormsg: From DATATAKING: set ra 103.25 2011-Dec-14 05:29:01 LOG4 got_cormsg: From DATATAKING: set dec 9.5091793243 2011-Dec-14 05:29:01 LOG4 got_cormsg: From DATATAKING: vw% 103.25 2011-Dec-14 05:29:01 LOG4 got_cormsg: From DATATAKING: vw% 9.5091793243 2011-Dec-14 05:29:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:29:01 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-14 05:29:01 LOG4 got_cormsg: From DATATAKING: pnt tr 103.25 9.5091793243 -CF 2011-Dec-14 05:29:01 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 05:29:01 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2011-Dec-14 05:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2011-Dec-14 05:29:21 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-14 05:29:21 LOG5 end_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2011-Dec-14 05:29:21 LOG4 lstwait: Finished waiting 0.39 seconds late 2011-Dec-14 05:29:21 INFO3 lstwait: Finished waiting 2011-Dec-14 05:29:21 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-14 05:29:21 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-14 05:29:21 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-14 05:29:21 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-14 05:29:21 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-14 05:29:21 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-14 05:29:21 LOG5 begin_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2011-Dec-14 05:29:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-14 05:29:21 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-14 05:29:21 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-14 05:29:21 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-14 05:29:21 LOG3 take_mock_data: PSET configuration: obsnm=Ellioty Gonzalez 2011-Dec-14 05:29:21 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_143 2011-Dec-14 05:29:21 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-14 05:29:21 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-14 05:29:21 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-14 05:29:21 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-14 05:29:21 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-14 05:29:21 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-14 05:29:21 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-14 05:29:21 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-14 05:29:21 LOG3 take_mock_data: PSET configuration: patternid=134800015 2011-Dec-14 05:29:21 LOG3 take_mock_data: PSET configuration: scanid=134800015 2011-Dec-14 05:29:21 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-14 05:29:21 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-14 05:29:21 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-14 05:29:21 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456364389.0 2011-Dec-14 05:29:21 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306364389.0 2011-Dec-14 05:29:21 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-14 05:29:21 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-14 05:29:21 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Ellioty Gonzalez:object=AGES3193_p3_143:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=134800015:scanid=134800015:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456364389.0:topobfreqhz=1306364389.0:filetype=1 2011-Dec-14 05:29:21 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-14 05:29:21 LOG5 begin_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2011-Dec-14 05:29:21 LOG4 from_mock: From MOCK: psetok 2011-Dec-14 05:29:21 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-14 05:29:21 LOG5 end_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2011-Dec-14 05:29:21 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-14 05:29:21 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-14 05:29:21 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-14 05:29:21 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-14 05:29:21 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2011-Dec-14 05:29:21 LOG4 from_mock: From MOCK: starok 2011-Dec-14 05:29:21 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-14 05:29:21 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2011-Dec-14 05:29:21 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-14 05:29:21 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 134800015 2011-Dec-14 05:29:21 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-14 05:29:21 LOG5 begin_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2011-Dec-14 05:29:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 05:29:21 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-14 05:29:21 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-14 05:29:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-14 05:29:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 34162.00 2011-Dec-14 05:29:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.364389 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 05:29:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.364389 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:29:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.364389 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:29:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.364389 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:29:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.364389 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:29:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.364389 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 05:29:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.364389 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 05:29:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.364389 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 05:29:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.364389 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 05:29:23 INFO2 got_mock_message: Mock spectrometer start file number is 01400 2011-Dec-14 05:29:23 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-14 05:29:23 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1199.9 s 2011-Dec-14 05:29:23 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-14 05:29:23 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-14 05:29:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-14 05:29:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-14 05:29:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-14 05:29:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-14 05:29:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-14 05:29:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-14 05:29:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-14 05:29:23 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-14 05:29:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 05:29:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 05:29:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 05:29:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 05:29:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 05:29:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 05:29:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 05:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2011-Dec-14 05:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-14 05:29:26 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:29:26.01 2011-Dec-14 05:29:26 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323854966.01 Wed Dec 14 05:29:26 2011 2011-Dec-14 05:29:26 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-14 05:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2011-Dec-14 05:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-14 05:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-14 05:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-14 05:29:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2011-Dec-14 05:29:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.097 1.016 0.879 1.092 2011-Dec-14 05:29:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.116 0.959 0.999 1.087 2011-Dec-14 05:29:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.795 1.095 0.919 1.077 2011-Dec-14 05:29:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.053 0.019 0.917 0.020 2011-Dec-14 05:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-14 05:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 05:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-14 05:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-14 05:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-14 05:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-14 05:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 05:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-14 05:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2011-Dec-14 05:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-14 05:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 05:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-14 05:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-14 05:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 05:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-14 05:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-14 05:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-14 05:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2011-Dec-14 05:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-14 05:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-14 05:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-14 05:30:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2011-Dec-14 05:30:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 1.016 0.880 1.093 2011-Dec-14 05:30:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.115 0.956 0.998 1.085 2011-Dec-14 05:30:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.796 1.096 0.919 1.078 2011-Dec-14 05:30:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.054 0.021 0.917 0.019 2011-Dec-14 05:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-14 05:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 05:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-14 05:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-14 05:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-14 05:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2011-Dec-14 05:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-14 05:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-14 05:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-14 05:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 05:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 05:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 05:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 05:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 05:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-14 05:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:31:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-14 05:31:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.107 1.018 0.880 1.093 2011-Dec-14 05:31:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.112 0.955 0.998 1.085 2011-Dec-14 05:31:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.796 1.096 0.919 1.079 2011-Dec-14 05:31:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.056 0.020 0.919 0.020 2011-Dec-14 05:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-14 05:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-14 05:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-14 05:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-14 05:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-14 05:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-14 05:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-14 05:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-14 05:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 05:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-14 05:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-14 05:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2011-Dec-14 05:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 05:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-14 05:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 05:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 05:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:32:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-14 05:32:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.010 0.881 1.092 2011-Dec-14 05:32:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.118 0.960 1.003 1.086 2011-Dec-14 05:32:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.803 1.105 0.923 1.081 2011-Dec-14 05:32:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 0.020 0.922 0.020 2011-Dec-14 05:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-14 05:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-14 05:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-14 05:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-14 05:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-14 05:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2011-Dec-14 05:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2011-Dec-14 05:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-14 05:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-14 05:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-14 05:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-14 05:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-14 05:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2011-Dec-14 05:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.111 (still bad) 2011-Dec-14 05:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.111 (still bad) 2011-Dec-14 05:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-14 05:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 05:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 05:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 05:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 05:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-14 05:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:33:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-14 05:33:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.096 1.006 0.880 1.089 2011-Dec-14 05:33:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.113 0.955 0.999 1.084 2011-Dec-14 05:33:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.796 1.093 0.920 1.078 2011-Dec-14 05:33:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.054 0.020 0.918 0.021 2011-Dec-14 05:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 05:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 05:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 05:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-14 05:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-14 05:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 05:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-14 05:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-14 05:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-14 05:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-14 05:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-14 05:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-14 05:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-14 05:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 05:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 05:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 05:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 05:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:34:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-14 05:34:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.098 1.005 0.881 1.087 2011-Dec-14 05:34:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.109 0.950 0.996 1.082 2011-Dec-14 05:34:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.796 1.094 0.921 1.078 2011-Dec-14 05:34:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.057 0.020 0.921 0.020 2011-Dec-14 05:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-14 05:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-14 05:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 05:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-14 05:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-14 05:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-14 05:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-14 05:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 05:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-14 05:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 05:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.113 (still bad) 2011-Dec-14 05:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.114 (still bad) 2011-Dec-14 05:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.114 (still bad) 2011-Dec-14 05:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.111 (still bad) 2011-Dec-14 05:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.113 (still bad) 2011-Dec-14 05:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.113 (still bad) 2011-Dec-14 05:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.113 (still bad) 2011-Dec-14 05:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.113 (still bad) 2011-Dec-14 05:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.114 (still bad) 2011-Dec-14 05:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.112 (still bad) 2011-Dec-14 05:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.111 (still bad) 2011-Dec-14 05:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.112 (still bad) 2011-Dec-14 05:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.114 (still bad) 2011-Dec-14 05:35:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-14 05:35:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 1.005 0.878 1.086 2011-Dec-14 05:35:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.113 0.953 0.995 1.081 2011-Dec-14 05:35:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.795 1.090 0.916 1.074 2011-Dec-14 05:35:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.056 0.023 0.919 0.023 2011-Dec-14 05:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.112 (still bad) 2011-Dec-14 05:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.113 (still bad) 2011-Dec-14 05:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2011-Dec-14 05:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2011-Dec-14 05:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2011-Dec-14 05:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.111 (still bad) 2011-Dec-14 05:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.114 (still bad) 2011-Dec-14 05:36:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.112 (still bad) 2011-Dec-14 05:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2011-Dec-14 05:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-14 05:36:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-14 05:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 05:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-14 05:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-14 05:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-14 05:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-14 05:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-14 05:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2011-Dec-14 05:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2011-Dec-14 05:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2011-Dec-14 05:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-14 05:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2011-Dec-14 05:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-14 05:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2011-Dec-14 05:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2011-Dec-14 05:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-14 05:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-14 05:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2011-Dec-14 05:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2011-Dec-14 05:36:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-14 05:36:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 1.003 0.880 1.086 2011-Dec-14 05:36:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.111 0.951 0.997 1.081 2011-Dec-14 05:36:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.796 1.092 0.920 1.077 2011-Dec-14 05:36:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.057 0.021 0.921 0.021 2011-Dec-14 05:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-14 05:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2011-Dec-14 05:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-14 05:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2011-Dec-14 05:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2011-Dec-14 05:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2011-Dec-14 05:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-14 05:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-14 05:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 05:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-14 05:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-14 05:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-14 05:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-14 05:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-14 05:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-14 05:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-14 05:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 05:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-14 05:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-14 05:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-14 05:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-14 05:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-14 05:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-14 05:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-14 05:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-14 05:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-14 05:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-14 05:37:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-14 05:37:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.099 1.002 0.878 1.084 2011-Dec-14 05:37:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.109 0.949 0.995 1.080 2011-Dec-14 05:37:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.795 1.092 0.919 1.075 2011-Dec-14 05:37:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.058 0.020 0.923 0.020 2011-Dec-14 05:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-14 05:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-14 05:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-14 05:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-14 05:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-14 05:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-14 05:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-14 05:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-14 05:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-14 05:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-14 05:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-14 05:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-14 05:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-14 05:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-14 05:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2011-Dec-14 05:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.104 (still bad) 2011-Dec-14 05:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2011-Dec-14 05:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-14 05:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2011-Dec-14 05:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2011-Dec-14 05:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.111 (still bad) 2011-Dec-14 05:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-14 05:38:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-14 05:38:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2011-Dec-14 05:38:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.002 0.879 1.085 2011-Dec-14 05:38:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.108 0.952 0.996 1.078 2011-Dec-14 05:38:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.796 1.093 0.919 1.076 2011-Dec-14 05:38:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.057 0.020 0.921 0.019 2011-Dec-14 05:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2011-Dec-14 05:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2011-Dec-14 05:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.111 (still bad) 2011-Dec-14 05:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-14 05:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-14 05:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2011-Dec-14 05:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-14 05:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-14 05:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2011-Dec-14 05:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-14 05:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2011-Dec-14 05:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.105 (still bad) 2011-Dec-14 05:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-14 05:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2011-Dec-14 05:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2011-Dec-14 05:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-14 05:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2011-Dec-14 05:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.105 (still bad) 2011-Dec-14 05:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-14 05:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-14 05:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-14 05:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-14 05:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-14 05:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2011-Dec-14 05:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2011-Dec-14 05:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-14 05:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-14 05:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.105 (still bad) 2011-Dec-14 05:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-14 05:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-14 05:39:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2011-Dec-14 05:39:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 1.000 0.876 1.084 2011-Dec-14 05:39:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.107 0.950 0.994 1.078 2011-Dec-14 05:39:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.794 1.090 0.919 1.076 2011-Dec-14 05:39:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.057 0.020 0.921 0.019 2011-Dec-14 05:39:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-14 05:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2011-Dec-14 05:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.106 (still bad) 2011-Dec-14 05:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-14 05:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-14 05:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-14 05:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.106 (still bad) 2011-Dec-14 05:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.106 (still bad) 2011-Dec-14 05:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.105 (still bad) 2011-Dec-14 05:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.106 (still bad) 2011-Dec-14 05:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.106 (still bad) 2011-Dec-14 05:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-14 05:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.106 (still bad) 2011-Dec-14 05:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.104 (still bad) 2011-Dec-14 05:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.104 (still bad) 2011-Dec-14 05:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.105 (still bad) 2011-Dec-14 05:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.105 (still bad) 2011-Dec-14 05:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-14 05:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2011-Dec-14 05:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2011-Dec-14 05:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2011-Dec-14 05:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2011-Dec-14 05:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2011-Dec-14 05:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2011-Dec-14 05:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-14 05:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-14 05:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.104 (still bad) 2011-Dec-14 05:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2011-Dec-14 05:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-14 05:40:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2011-Dec-14 05:40:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.003 0.889 1.100 2011-Dec-14 05:40:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.104 0.950 0.995 1.078 2011-Dec-14 05:40:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.795 1.089 0.918 1.078 2011-Dec-14 05:40:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.057 0.019 0.920 0.019 2011-Dec-14 05:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.111 (still bad) 2011-Dec-14 05:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-14 05:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.105 (still bad) 2011-Dec-14 05:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2011-Dec-14 05:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.104 (still bad) 2011-Dec-14 05:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2011-Dec-14 05:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2011-Dec-14 05:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2011-Dec-14 05:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.104 (still bad) 2011-Dec-14 05:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-14 05:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-14 05:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-14 05:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2011-Dec-14 05:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-14 05:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2011-Dec-14 05:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2011-Dec-14 05:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.106 (still bad) 2011-Dec-14 05:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-14 05:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2011-Dec-14 05:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2011-Dec-14 05:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-14 05:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2011-Dec-14 05:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-14 05:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.106 (still bad) 2011-Dec-14 05:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 05:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-14 05:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-14 05:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-14 05:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-14 05:41:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-14 05:41:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 1.004 0.876 1.083 2011-Dec-14 05:41:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.106 0.950 0.992 1.075 2011-Dec-14 05:41:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.794 1.088 0.920 1.078 2011-Dec-14 05:41:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.055 0.020 0.919 0.020 2011-Dec-14 05:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-14 05:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-14 05:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-14 05:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-14 05:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-14 05:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-14 05:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-14 05:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-14 05:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-14 05:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 05:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-14 05:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-14 05:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-14 05:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-14 05:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-14 05:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-14 05:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-14 05:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-14 05:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-14 05:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-14 05:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-14 05:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-14 05:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-14 05:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-14 05:42:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-14 05:42:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.104 1.003 0.876 1.082 2011-Dec-14 05:42:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.112 0.956 0.995 1.079 2011-Dec-14 05:42:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.795 1.090 0.921 1.079 2011-Dec-14 05:42:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.057 0.020 0.921 0.020 2011-Dec-14 05:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 05:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 05:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-14 05:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 05:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 05:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 05:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-14 05:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-14 05:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-14 05:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-14 05:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-14 05:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-14 05:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-14 05:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2011-Dec-14 05:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-14 05:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2011-Dec-14 05:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2011-Dec-14 05:43:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-14 05:43:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 0.998 0.875 1.081 2011-Dec-14 05:43:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.103 0.947 0.995 1.076 2011-Dec-14 05:43:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.793 1.087 0.916 1.075 2011-Dec-14 05:43:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.054 0.020 0.918 0.020 2011-Dec-14 05:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-14 05:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-14 05:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2011-Dec-14 05:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-14 05:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2011-Dec-14 05:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2011-Dec-14 05:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-14 05:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2011-Dec-14 05:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2011-Dec-14 05:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2011-Dec-14 05:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-14 05:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2011-Dec-14 05:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2011-Dec-14 05:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-14 05:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2011-Dec-14 05:44:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-14 05:44:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 1.000 0.875 1.079 2011-Dec-14 05:44:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.101 0.948 0.992 1.074 2011-Dec-14 05:44:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.792 1.088 0.916 1.077 2011-Dec-14 05:44:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.056 0.020 0.918 0.020 2011-Dec-14 05:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2011-Dec-14 05:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2011-Dec-14 05:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-14 05:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-14 05:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-14 05:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-14 05:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-14 05:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 05:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-14 05:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-14 05:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-14 05:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-14 05:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-14 05:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-14 05:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-14 05:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-14 05:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-14 05:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-14 05:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-14 05:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-14 05:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-14 05:45:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-14 05:45:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.001 0.874 1.078 2011-Dec-14 05:45:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.112 0.957 0.993 1.076 2011-Dec-14 05:45:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.792 1.090 0.917 1.075 2011-Dec-14 05:45:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 0.020 0.922 0.020 2011-Dec-14 05:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-14 05:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-14 05:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-14 05:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-14 05:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2011-Dec-14 05:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2011-Dec-14 05:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-14 05:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2011-Dec-14 05:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-14 05:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2011-Dec-14 05:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2011-Dec-14 05:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2011-Dec-14 05:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-14 05:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2011-Dec-14 05:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-14 05:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-14 05:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-14 05:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-14 05:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-14 05:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-14 05:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-14 05:47:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-14 05:47:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.109 1.007 0.872 1.078 2011-Dec-14 05:47:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.100 0.951 0.992 1.077 2011-Dec-14 05:47:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.793 1.092 0.916 1.076 2011-Dec-14 05:47:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.057 0.020 0.918 0.020 2011-Dec-14 05:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-14 05:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-14 05:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-14 05:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-14 05:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-14 05:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-14 05:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-14 05:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-14 05:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-14 05:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-14 05:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-14 05:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-14 05:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-14 05:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-14 05:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2011-Dec-14 05:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.106 (still bad) 2011-Dec-14 05:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.102 (still bad) 2011-Dec-14 05:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.103 (still bad) 2011-Dec-14 05:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.105 (still bad) 2011-Dec-14 05:48:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-14 05:48:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 1.003 0.874 1.081 2011-Dec-14 05:48:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.100 0.952 0.995 1.077 2011-Dec-14 05:48:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.792 1.087 0.914 1.075 2011-Dec-14 05:48:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.056 0.021 0.919 0.021 2011-Dec-14 05:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.103 (still bad) 2011-Dec-14 05:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.105 (still bad) 2011-Dec-14 05:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.101 (still bad) 2011-Dec-14 05:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.100 (still bad) 2011-Dec-14 05:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.103 (still bad) 2011-Dec-14 05:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.101 (still bad) 2011-Dec-14 05:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.102 (still bad) 2011-Dec-14 05:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-14 05:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.101 (still bad) 2011-Dec-14 05:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.101 (still bad) 2011-Dec-14 05:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.103 (still bad) 2011-Dec-14 05:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.101 (still bad) 2011-Dec-14 05:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.102 (still bad) 2011-Dec-14 05:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.106 (still bad) 2011-Dec-14 05:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.101 (still bad) 2011-Dec-14 05:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.101 (still bad) 2011-Dec-14 05:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.103 (still bad) 2011-Dec-14 05:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.101 (still bad) 2011-Dec-14 05:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.101 (still bad) 2011-Dec-14 05:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-14 05:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2011-Dec-14 05:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.100 (still bad) 2011-Dec-14 05:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.100 (still bad) 2011-Dec-14 05:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2011-Dec-14 05:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-14 05:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.100 (still bad) 2011-Dec-14 05:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2011-Dec-14 05:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-14 05:49:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-14 05:49:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 0.999 0.872 1.079 2011-Dec-14 05:49:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.099 0.950 0.992 1.076 2011-Dec-14 05:49:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.790 1.088 0.916 1.079 2011-Dec-14 05:49:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.054 0.020 0.916 0.020 2011-Dec-14 05:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2011-Dec-14 05:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.105 (still bad) 2011-Dec-14 05:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.101 (still bad) 2011-Dec-14 05:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2011-Dec-14 05:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.103 (still bad) 2011-Dec-14 05:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.101 (still bad) 2011-Dec-14 05:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.103 (still bad) 2011-Dec-14 05:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-14 05:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.102 (still bad) 2011-Dec-14 05:49:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 05:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.103 (still bad) 2011-Dec-14 05:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.103 (still bad) 2011-Dec-14 05:49:27 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-14 05:49:27 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-14 05:49:27 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-14 05:49:27 LOG5 end_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2011-Dec-14 05:49:27 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-14 05:49:27 LOG5 end_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2011-Dec-14 05:49:27 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-14 05:49:27 LOG5 finish_task: Level: (2) ID = <10193> Status = 0 0 0 0 ok 2011-Dec-14 05:49:27 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-14 05:49:27 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-14 05:49:27 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-14 05:49:27 LOG5 end_task: Level: (2) ID = <10193> Status = 0 0 0 0 ok 2011-Dec-14 05:49:27 COMMAND run_command_line: EXECUTING command 41: 'ENDIF' 2011-Dec-14 05:49:27 COMMAND run_command_line: EXECUTING command 44: 'IF LSTSLEW(AGES3193_p3_145) < 105640 THEN' 2011-Dec-14 05:49:27 LOG3 is_if_valid: Current source data: up 100.0 14.2 UP - - 23 2.0 2011-Dec-14 05:49:27 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_145) < 105640 2011-Dec-14 05:49:27 INFO5 is_if_valid: Condition parsed as: 10.921726333333334 < 10.944444444444445 2011-Dec-14 05:49:27 COMMAND run_command_line: EXECUTING command 45: 'FIXEDDRIFT az=99.74 alfaangle=-76.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_145 ra=95300.00 dec=201700.00' 2011-Dec-14 05:49:27 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-14 05:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.103 (still bad) 2011-Dec-14 05:49:28 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-14 05:49:28 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 99.74 -76.1 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_145 95300.00 201700.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-14 05:49:28 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-14 05:49:28 LOG5 begin_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2011-Dec-14 05:49:28 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_143' 2011-Dec-14 05:49:28 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-14 05:49:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_145} 2011-Dec-14 05:49:28 INFO3 fixed_driftmap: Sending telescope to Az = 99.74 and ZA = 14.97 2011-Dec-14 05:49:28 LOG3 track_source: Calling 'track_source AGES3193_p3_145 99.74 14.9720122755 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-14 05:49:28 START begin_task: Starting task 'sending tracking commands' 2011-Dec-14 05:49:28 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2011-Dec-14 05:49:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_145} INFO {Slewing to source 'AGES3193_p3_145' ...} 2011-Dec-14 05:49:28 INFO1 track_source: Starting to track AGES3193_p3_145 2011-Dec-14 05:49:28 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_145" 2011-Dec-14 05:49:28 LOG3 vw_send: To DATATAKING: set ra 99.74 2011-Dec-14 05:49:28 LOG3 vw_send: To DATATAKING: set dec 14.9720122755 2011-Dec-14 05:49:28 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-14 05:49:28 LOG3 vw_send: To DATATAKING: pnt tr 99.74 14.9720122755 -CF 2011-Dec-14 05:49:28 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 05:49:28 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-14 05:49:28 LOG5 finish_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2011-Dec-14 05:49:28 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-14 05:49:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 05:49:28 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-14 05:49:28 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2011-Dec-14 05:49:28 START begin_task: Starting task 'rotate ALFA to -76.1 degrees' 2011-Dec-14 05:49:28 LOG5 begin_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2011-Dec-14 05:49:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -76.1 degrees ...} 2011-Dec-14 05:49:28 INFO2 rotate_alfa: ALFA commanded to -76.1 degrees 2011-Dec-14 05:49:28 LOG3 sock_errsend: To ALFAMOTOR: POSITION -76.1 REPLY 2011-Dec-14 05:49:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-14 05:49:28 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-14 05:49:28 LOG5 begin_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2011-Dec-14 05:49:28 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_145" 2011-Dec-14 05:49:28 LOG4 got_cormsg: From DATATAKING: set ra 99.74 2011-Dec-14 05:49:28 LOG4 got_cormsg: From DATATAKING: set dec 14.9720122755 2011-Dec-14 05:49:28 LOG4 got_cormsg: From DATATAKING: vw% 99.74 2011-Dec-14 05:49:28 LOG4 got_cormsg: From DATATAKING: vw% 14.9720122755 2011-Dec-14 05:49:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:49:28 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-14 05:49:28 LOG4 got_cormsg: From DATATAKING: pnt tr 99.74 14.9720122755 -CF 2011-Dec-14 05:49:28 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 05:49:28 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-14 05:49:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:49:33 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-14 05:49:33 INFO3 alfa_motor: ALFA rotator in-position -76.10 degrees 2011-Dec-14 05:49:33 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-14 05:49:33 LOG5 end_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2011-Dec-14 05:49:33 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-14 05:49:33 STOP finish_task: Finishing task 'rotate ALFA to -76.1 degrees' 2011-Dec-14 05:49:33 LOG5 finish_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2011-Dec-14 05:49:33 INFO2 finish_task: DONE finished configuration: rotating ALFA to -76.1 degrees 2011-Dec-14 05:49:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 05:49:33 STOP end_task: Finishing task 'rotate ALFA to -76.1 degrees' with status 'OK' 2011-Dec-14 05:49:33 LOG5 end_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2011-Dec-14 05:49:33 START begin_task: Starting task 'waiting on telescope' 2011-Dec-14 05:49:33 LOG5 begin_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2011-Dec-14 05:49:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-14 05:49:33 LOG3 waittrk: Start waittrk 5 2011-Dec-14 05:49:33 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-14 05:49:33 LOG5 begin_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2011-Dec-14 05:49:38 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-14 05:49:38 LOG5 end_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2011-Dec-14 05:49:38 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-14 05:49:38 LOG5 begin_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2011-Dec-14 05:51:50 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-14 05:51:50 LOG5 end_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2011-Dec-14 05:51:50 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-14 05:51:50 INFO2 waittrk: Now tracking AGES3193_p3_145 2011-Dec-14 05:51:50 LOG4 waittrk: Current telescope position: Az = 99.48 ZA = 14.98 2011-Dec-14 05:51:50 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-14 05:51:50 LOG5 finish_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2011-Dec-14 05:51:50 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-14 05:51:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 05:51:50 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-14 05:51:50 LOG5 end_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2011-Dec-14 05:51:50 START begin_task: Starting task 'selecting calibration type' 2011-Dec-14 05:51:50 LOG5 begin_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2011-Dec-14 05:51:50 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-14 05:51:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-14 05:51:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 05:51:50 START begin_task: Starting task 'waiting on setcal' 2011-Dec-14 05:51:50 LOG5 begin_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2011-Dec-14 05:51:50 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-14 05:51:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 05:51:51 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:51:51 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-14 05:51:51 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-14 05:51:51 LOG5 end_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2011-Dec-14 05:51:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-14 05:51:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-14 05:51:51 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-14 05:51:51 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-14 05:51:51 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2011-Dec-14 05:51:51 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:51:51 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-14 05:51:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-14 05:51:51 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2011-Dec-14 05:51:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-14 05:51:51 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-14 05:51:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-14 05:51:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-14 05:51:51 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-14 05:51:51 LOG5 begin_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2011-Dec-14 05:51:51 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-14 05:51:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-14 05:51:51 LOG5 end_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2011-Dec-14 05:51:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-14 05:51:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-14 05:51:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-14 05:51:51 LOG5 end_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2011-Dec-14 05:51:51 LOG5 dopset_later: Calling 'dopset_later 56.472157942597718' 2011-Dec-14 05:51:51 INFO3 dopset_later: Setting Doppler correction for 05:52:47 (56.5 seconds from now) 2011-Dec-14 05:51:51 LOG5 antvel: Calling 'antvel 99.740000 14.972012 F Heliocentric 56.472157942597718' 2011-Dec-14 05:51:51 LOG2 antvel: Transforming current Az = 99.74 ZA = 14.97 to apparent RA = 09:53:41.4 Dec = +20:13:23.4 2011-Dec-14 05:51:51 LOG2 antvel: Parameters to Doppler: Heliocentric 35567 2011 348 0.0 2011-Dec-14 05:51:51 INFO5 antvel: Computed antenna velocity: -26.21319 km/s 2011-Dec-14 05:51:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-26.213190427299999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-14 05:51:51 INFO4 dopset_gen: New sky frequencies: 1381.364212 1381.364212 1381.364212 1381.364212 1381.364212 1381.364212 1381.364212 1381.364212 1381.364212 2011-Dec-14 05:51:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.364212 sky0=1381.364212 sky1=1381.364212 sky2=1381.364212 sky3=1381.364212 sky4=1381.364212 sky5=1381.364212 sky6=1381.364212 sky7=1381.364212 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-14 05:51:51 LOG2 dopset_gen: Result from 'sky2syn': 1631.364212 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-14 05:51:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631364212.0} 2011-Dec-14 05:51:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 05:51:51 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-14 05:51:51 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-14 05:51:51 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:08.0 Dec = +20:16:46.8 2011-Dec-14 05:51:51 LOG3 track_source: Calling 'track_source AGES3193_p3_145 095208.0 201646.8 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-14 05:51:51 START begin_task: Starting task 'sending tracking commands' 2011-Dec-14 05:51:51 LOG5 begin_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2011-Dec-14 05:51:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_145} INFO {Slewing to source 'AGES3193_p3_145' ...} 2011-Dec-14 05:51:51 INFO1 track_source: Starting to track AGES3193_p3_145 2011-Dec-14 05:51:51 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_145" 2011-Dec-14 05:51:51 LOG3 vw_send: To DATATAKING: set ra 095208.0 2011-Dec-14 05:51:52 LOG3 vw_send: To DATATAKING: set dec 201646.8 2011-Dec-14 05:51:52 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-14 05:51:52 LOG3 vw_send: To DATATAKING: pnt tr 095208.0 201646.8 -CJ 2011-Dec-14 05:51:52 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 05:51:52 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-14 05:51:52 LOG5 finish_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2011-Dec-14 05:51:52 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-14 05:51:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 05:51:52 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-14 05:51:52 LOG5 end_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2011-Dec-14 05:51:52 START begin_task: Starting task 'waiting on telescope' 2011-Dec-14 05:51:52 LOG5 begin_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2011-Dec-14 05:51:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-14 05:51:52 LOG3 waittrk: Start waittrk 5 2011-Dec-14 05:51:52 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-14 05:51:52 LOG5 begin_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2011-Dec-14 05:51:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631364212.0} 2011-Dec-14 05:51:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 05:51:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:51:52 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_145" 2011-Dec-14 05:51:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:51:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:51:52 LOG4 got_cormsg: From DATATAKING: set ra 095208.0 2011-Dec-14 05:51:52 LOG4 got_cormsg: From DATATAKING: set dec 201646.8 2011-Dec-14 05:51:52 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-14 05:51:52 LOG4 got_cormsg: From DATATAKING: pnt tr 095208.0 201646.8 -CJ 2011-Dec-14 05:51:52 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 05:51:52 LOG4 got_cormsg: From DATATAKING: 095208.0 2011-Dec-14 05:51:52 LOG4 got_cormsg: From DATATAKING: vw% 201646.8 2011-Dec-14 05:51:52 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2011-Dec-14 05:51:57 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-14 05:51:57 LOG5 end_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2011-Dec-14 05:51:57 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-14 05:51:57 LOG5 begin_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2011-Dec-14 05:51:59 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-14 05:51:59 LOG5 end_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2011-Dec-14 05:51:59 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-14 05:51:59 INFO2 waittrk: Now tracking AGES3193_p3_145 2011-Dec-14 05:51:59 LOG4 waittrk: Current telescope position: Az = 99.47 ZA = 15.00 2011-Dec-14 05:51:59 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-14 05:51:59 LOG5 finish_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2011-Dec-14 05:51:59 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-14 05:51:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 05:51:59 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-14 05:51:59 LOG5 end_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2011-Dec-14 05:51:59 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-14 05:51:59 LOG5 begin_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2011-Dec-14 05:51:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-14 05:51:59 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-14 05:51:59 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-14 05:51:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-14 05:51:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 05:51:59 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-14 05:51:59 LOG5 begin_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2011-Dec-14 05:51:59 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-14 05:51:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 05:52:02 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:52:02 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-14 05:52:02 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-14 05:52:02 LOG5 end_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2011-Dec-14 05:52:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-14 05:52:02 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-14 05:52:02 LOG5 begin_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2011-Dec-14 05:52:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-14 05:52:02 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-14 05:52:02 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-14 05:52:02 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-14 05:52:02 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-14 05:52:02 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-14 05:52:02 LOG5 begin_task: Level: (5) ID = <10254> Status = 0 0 0 0 ok 2011-Dec-14 05:52:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-14 05:52:02 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:52:03 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 8 5 dB 2011-Dec-14 05:52:03 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 3 4 dB 2011-Dec-14 05:52:03 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 2 dB 2011-Dec-14 05:52:03 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2011-Dec-14 05:52:03 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-14 05:52:03 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-14 05:52:03 LOG5 end_task: Level: (5) ID = <10254> Status = 0 0 0 0 ok 2011-Dec-14 05:52:03 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.905 1.028 ALFA beam 1: 0.910 1.118 2011-Dec-14 05:52:03 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.923 1.012 ALFA beam 3: 1.030 1.106 2011-Dec-14 05:52:03 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.803 0.901 ALFA beam 5: 0.964 0.864 2011-Dec-14 05:52:03 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.101 0.014 ALFA beam 7: 0.958 0.014 2011-Dec-14 05:52:03 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-14 05:52:03 LOG5 finish_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2011-Dec-14 05:52:03 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-14 05:52:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 05:52:03 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-14 05:52:03 LOG5 end_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2011-Dec-14 05:52:03 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-14 05:52:03 LOG5 begin_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2011-Dec-14 05:52:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-14 05:52:03 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-14 05:52:03 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-14 05:52:03 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-14 05:52:03 LOG5 begin_task: Level: (5) ID = <10256> Status = 0 0 0 0 ok 2011-Dec-14 05:52:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-14 05:52:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.905 1.028 0.910 1.118 2011-Dec-14 05:52:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 1.012 1.030 1.106 2011-Dec-14 05:52:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.803 0.901 0.964 0.864 2011-Dec-14 05:52:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 0.014 0.958 0.014 2011-Dec-14 05:52:09 INFO3 from_mock: From MOCK: b0s0g0 rms:A 32.0 28.2 B 29.8 29.8 mn:A 0.2 0.1 B -0.2 -0.3 gn: 11 11 2011-Dec-14 05:52:09 INFO3 from_mock: From MOCK: b0s1g0 rms:A 28.6 27.3 B 27.6 29.2 mn:A 0.2 -0.4 B -0.5 0.1 gn: 11 11 2011-Dec-14 05:52:09 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.7 28.7 B 32.3 28.3 mn:A 0.6 0.7 B 0.1 -0.1 gn: 7 11 2011-Dec-14 05:52:09 INFO3 from_mock: From MOCK: b1s1g0 rms:A 30.2 27.9 B 30.7 30.7 mn:A -0.3 -0.3 B 0.5 0.2 gn: 8 10 2011-Dec-14 05:52:09 INFO3 from_mock: From MOCK: b2s0g0 rms:A 28.9 28.0 B 28.4 29.8 mn:A -0.1 -0.3 B 0.4 0.1 gn: 10 11 2011-Dec-14 05:52:09 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.7 30.0 B 29.3 27.2 mn:A 0.3 -0.3 B -0.0 0.2 gn: 11 11 2011-Dec-14 05:52:09 INFO3 from_mock: From MOCK: b3s0g0 rms:A 28.7 28.4 B 31.1 27.7 mn:A 0.4 -0.2 B -0.0 -0.3 gn: 12 12 2011-Dec-14 05:52:09 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.0 29.3 B 29.6 30.8 mn:A -0.3 0.2 B 0.1 0.1 gn: 12 12 2011-Dec-14 05:52:09 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.0 29.0 B 28.5 28.6 mn:A -0.3 -0.3 B -0.4 0.0 gn: 13 11 2011-Dec-14 05:52:09 INFO3 from_mock: From MOCK: b4s1g0 rms:A 32.0 28.9 B 30.8 29.7 mn:A -0.1 0.1 B -0.3 0.2 gn: 16 13 2011-Dec-14 05:52:09 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.8 28.7 B 31.4 31.4 mn:A 0.5 0.4 B -0.1 0.5 gn: 12 11 2011-Dec-14 05:52:09 INFO3 from_mock: From MOCK: b5s1g0 rms:A 29.7 29.5 B 28.0 27.7 mn:A -0.4 0.3 B -0.1 0.1 gn: 12 10 2011-Dec-14 05:52:09 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.9 30.1 B 14.1 14.5 mn:A -0.4 0.2 B 0.4 -0.5 gn: 13 31 2011-Dec-14 05:52:09 INFO3 from_mock: From MOCK: b6s1g0 rms:A 29.8 27.0 B 11.1 10.8 mn:A 0.6 0.5 B 0.1 0.2 gn: 13 31 2011-Dec-14 05:52:09 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-14 05:52:09 LOG5 end_task: Level: (5) ID = <10256> Status = 0 0 0 0 ok 2011-Dec-14 05:52:09 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-14 05:52:09 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-14 05:52:09 LOG5 finish_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2011-Dec-14 05:52:09 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-14 05:52:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 05:52:09 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-14 05:52:09 LOG5 end_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2011-Dec-14 05:52:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-14 05:52:09 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-14 05:52:09 LOG5 finish_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2011-Dec-14 05:52:09 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-14 05:52:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 05:52:09 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-14 05:52:09 LOG5 end_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2011-Dec-14 05:52:09 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 05:52:09 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 05:52:09 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 05:52:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 05:52:09 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-14 05:52:09 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-14 05:52:09 LOG5 begin_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2011-Dec-14 05:52:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-14 05:52:09 START begin_task: Starting task 'selecting calibration type' 2011-Dec-14 05:52:09 LOG5 begin_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2011-Dec-14 05:52:09 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-14 05:52:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-14 05:52:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 05:52:09 START begin_task: Starting task 'waiting on setcal' 2011-Dec-14 05:52:09 LOG5 begin_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2011-Dec-14 05:52:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Ellioty Gonzalez' 2011-Dec-14 05:52:09 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-14 05:52:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 05:52:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:52:09 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-14 05:52:09 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-14 05:52:09 LOG5 end_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2011-Dec-14 05:52:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-14 05:52:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-14 05:52:09 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-14 05:52:09 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-14 05:52:09 LOG5 begin_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2011-Dec-14 05:52:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:52:10 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-14 05:52:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-14 05:52:10 LOG5 end_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2011-Dec-14 05:52:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-14 05:52:10 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-14 05:52:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-14 05:52:10 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-14 05:52:10 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-14 05:52:10 LOG5 begin_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2011-Dec-14 05:52:10 NOTE WAPPDATA-new_file: New FITS file: wapp.20111214.a2048.0005.fits 2011-Dec-14 05:52:10 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-14 05:52:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-14 05:52:10 LOG5 end_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2011-Dec-14 05:52:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-14 05:52:10 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-14 05:52:10 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-14 05:52:10 LOG5 end_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2011-Dec-14 05:52:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-14 05:52:10 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-14 05:52:10 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-14 05:52:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-14 05:52:10 LOG5 begin_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2011-Dec-14 05:52:10 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111214.a2048.0005.fits} 2011-Dec-14 05:52:10 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-14 05:52:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-14 05:52:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-14 05:52:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-14 05:52:10 LOG5 end_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2011-Dec-14 05:52:10 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-14 05:52:10 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-14 05:52:10 LOG5 begin_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2011-Dec-14 05:52:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-14 05:52:10 LOG5 log_alfabeam: Parameters: 9.8688888888888897 20.279666666666664 10.934073 2011.9534416432175 -76.100021 2011-Dec-14 05:52:10 LOG4 log_alfabeam: ALFABEAM 0 9.868888888888890 20.279666666666657 2011-Dec-14 05:52:10 LOG4 log_alfabeam: ALFABEAM 1 9.867292716322025 20.369656539974716 2011-Dec-14 05:52:10 LOG4 log_alfabeam: ALFABEAM 2 9.861672813206694 20.309670173240839 2011-Dec-14 05:52:10 LOG4 log_alfabeam: ALFABEAM 3 9.863296709756215 20.219368047260257 2011-Dec-14 05:52:10 LOG4 log_alfabeam: ALFABEAM 4 9.870520556064228 20.189971351898119 2011-Dec-14 05:52:10 LOG4 log_alfabeam: ALFABEAM 5 9.876106024513129 20.249888845485930 2011-Dec-14 05:52:10 LOG4 log_alfabeam: ALFABEAM 6 9.874501898063750 20.339272245638124 2011-Dec-14 05:52:10 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-14 05:52:10 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-14 05:52:10 LOG3 take_mock_data: PSET configuration: obsnm=Ellioty Gonzalez 2011-Dec-14 05:52:10 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_145 2011-Dec-14 05:52:10 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-14 05:52:10 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-14 05:52:10 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-14 05:52:10 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-14 05:52:10 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-14 05:52:10 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-14 05:52:10 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-14 05:52:10 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-14 05:52:10 LOG3 take_mock_data: PSET configuration: patternid=134800015 2011-Dec-14 05:52:10 LOG3 take_mock_data: PSET configuration: scanid=134800016 2011-Dec-14 05:52:10 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-14 05:52:10 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-14 05:52:10 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-14 05:52:10 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456364212.0 2011-Dec-14 05:52:10 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306364212.0 2011-Dec-14 05:52:10 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-14 05:52:10 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-14 05:52:10 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Ellioty Gonzalez:object=AGES3193_p3_145:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=134800015:scanid=134800016:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456364212.0:topobfreqhz=1306364212.0:filetype=1 2011-Dec-14 05:52:10 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-14 05:52:10 LOG5 begin_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2011-Dec-14 05:52:10 LOG4 from_mock: From MOCK: psetok 2011-Dec-14 05:52:10 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-14 05:52:10 LOG5 end_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2011-Dec-14 05:52:10 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-14 05:52:10 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-14 05:52:10 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-14 05:52:10 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-14 05:52:10 LOG5 begin_task: Level: (5) ID = <10265> Status = 0 0 0 0 ok 2011-Dec-14 05:52:10 LOG4 from_mock: From MOCK: starok 2011-Dec-14 05:52:10 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-14 05:52:10 LOG5 end_task: Level: (5) ID = <10265> Status = 0 0 0 0 ok 2011-Dec-14 05:52:10 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-14 05:52:10 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134800016 2011-Dec-14 05:52:11 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-14 05:52:11 LOG5 begin_task: Level: (5) ID = <10266> Status = 0 0 0 0 ok 2011-Dec-14 05:52:11 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-14 05:52:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 05:52:11 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-14 05:52:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-14 05:52:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35532.00 2011-Dec-14 05:52:13 INFO2 got_mock_message: Mock spectrometer start file number is 01500 2011-Dec-14 05:52:13 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-14 05:52:13 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-14 05:52:13 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-14 05:52:13 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-14 05:52:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-14 05:52:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-14 05:52:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-14 05:52:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-14 05:52:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-14 05:52:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-14 05:52:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-14 05:52:13 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-14 05:52:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:52:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:52:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:52:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:52:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:52:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:52:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:52:16 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:52:16.01 2011-Dec-14 05:52:16 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323856336.01 Wed Dec 14 05:52:16 2011 2011-Dec-14 05:52:16 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-14 05:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.364212 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 05:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.364212 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.364212 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.364212 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.364212 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.364212 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 05:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.364212 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 05:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.364212 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 05:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.364212 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 05:52:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 05:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.510 (still bad) 2011-Dec-14 05:52:22 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-14 05:52:22 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-14 05:52:22 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-14 05:52:22 LOG5 end_task: Level: (5) ID = <10266> Status = 0 0 0 0 ok 2011-Dec-14 05:52:22 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-14 05:52:22 LOG5 end_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2011-Dec-14 05:52:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-14 05:52:22 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-14 05:52:22 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-14 05:52:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-14 05:52:22 LOG5 begin_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2011-Dec-14 05:52:22 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-14 05:52:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-14 05:52:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-14 05:52:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-14 05:52:22 LOG5 end_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2011-Dec-14 05:52:22 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-14 05:52:22 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-14 05:52:22 LOG5 begin_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2011-Dec-14 05:52:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-14 05:52:22 LOG5 log_alfabeam: Parameters: 9.8688888888888897 20.279666666666664 10.937137 2011.9534419917866 -76.100021 2011-Dec-14 05:52:22 LOG4 log_alfabeam: ALFABEAM 0 9.868888888888890 20.279666666666650 2011-Dec-14 05:52:22 LOG4 log_alfabeam: ALFABEAM 1 9.867289495621497 20.369644979545615 2011-Dec-14 05:52:22 LOG4 log_alfabeam: ALFABEAM 2 9.861671754696312 20.309619519695900 2011-Dec-14 05:52:22 LOG4 log_alfabeam: ALFABEAM 3 9.863298804795097 20.219330115105183 2011-Dec-14 05:52:22 LOG4 log_alfabeam: ALFABEAM 4 9.870523651283678 20.189982268693381 2011-Dec-14 05:52:22 LOG4 log_alfabeam: ALFABEAM 5 9.876107065577312 20.249938633542893 2011-Dec-14 05:52:22 LOG4 log_alfabeam: ALFABEAM 6 9.874499777811598 20.339312272940141 2011-Dec-14 05:52:22 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-14 05:52:22 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-14 05:52:22 LOG3 take_mock_data: PSET configuration: obsnm=Ellioty Gonzalez 2011-Dec-14 05:52:22 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_145 2011-Dec-14 05:52:22 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-14 05:52:22 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-14 05:52:22 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-14 05:52:22 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-14 05:52:22 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-14 05:52:22 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-14 05:52:22 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-14 05:52:22 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-14 05:52:22 LOG3 take_mock_data: PSET configuration: patternid=134800015 2011-Dec-14 05:52:22 LOG3 take_mock_data: PSET configuration: scanid=134800017 2011-Dec-14 05:52:22 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-14 05:52:22 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-14 05:52:22 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-14 05:52:22 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456364212.0 2011-Dec-14 05:52:22 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306364212.0 2011-Dec-14 05:52:22 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-14 05:52:22 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-14 05:52:22 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Ellioty Gonzalez:object=AGES3193_p3_145:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=134800015:scanid=134800017:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456364212.0:topobfreqhz=1306364212.0:filetype=1 2011-Dec-14 05:52:22 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-14 05:52:22 LOG5 begin_task: Level: (5) ID = <10269> Status = 0 0 0 0 ok 2011-Dec-14 05:52:22 LOG4 from_mock: From MOCK: psetok 2011-Dec-14 05:52:22 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-14 05:52:22 LOG5 end_task: Level: (5) ID = <10269> Status = 0 0 0 0 ok 2011-Dec-14 05:52:22 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-14 05:52:22 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-14 05:52:22 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-14 05:52:22 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-14 05:52:22 LOG5 begin_task: Level: (5) ID = <10270> Status = 0 0 0 0 ok 2011-Dec-14 05:52:22 LOG4 from_mock: From MOCK: starok 2011-Dec-14 05:52:22 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-14 05:52:22 LOG5 end_task: Level: (5) ID = <10270> Status = 0 0 0 0 ok 2011-Dec-14 05:52:22 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-14 05:52:22 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134800017 2011-Dec-14 05:52:22 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-14 05:52:22 LOG5 begin_task: Level: (5) ID = <10271> Status = 0 0 0 0 ok 2011-Dec-14 05:52:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 05:52:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-14 05:52:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35543.00 2011-Dec-14 05:52:23 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-14 05:52:23 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-14 05:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.540 (still bad) 2011-Dec-14 05:52:25 INFO2 got_mock_message: Mock spectrometer start file number is 01600 2011-Dec-14 05:52:25 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-14 05:52:25 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-14 05:52:25 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-14 05:52:25 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-14 05:52:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-14 05:52:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-14 05:52:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-14 05:52:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-14 05:52:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-14 05:52:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-14 05:52:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-14 05:52:25 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-14 05:52:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:52:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:52:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:52:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:52:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:52:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:52:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-14 05:52:28 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:52:28.02 2011-Dec-14 05:52:28 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323856348.02 Wed Dec 14 05:52:28 2011 2011-Dec-14 05:52:28 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-14 05:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.364212 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 05:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.364212 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.364212 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.364212 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.364212 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.364212 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 05:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.364212 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 05:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.364212 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 05:52:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.364212 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 05:52:28 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-14 05:52:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 05:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-14 05:52:34 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-14 05:52:34 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-14 05:52:34 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-14 05:52:34 LOG5 end_task: Level: (5) ID = <10271> Status = 0 0 0 0 ok 2011-Dec-14 05:52:34 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-14 05:52:34 LOG5 end_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2011-Dec-14 05:52:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-14 05:52:34 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-14 05:52:34 LOG5 finish_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2011-Dec-14 05:52:34 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-14 05:52:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 05:52:34 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-14 05:52:34 LOG5 end_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2011-Dec-14 05:52:34 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-14 05:52:34 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 99.74 and ZA = 14.97 2011-Dec-14 05:52:34 LOG3 track_source: Calling 'track_source AGES3193_p3_145 99.74 14.9720122755 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-14 05:52:34 START begin_task: Starting task 'sending tracking commands' 2011-Dec-14 05:52:34 LOG5 begin_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2011-Dec-14 05:52:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_145} INFO {Slewing to source 'AGES3193_p3_145' ...} 2011-Dec-14 05:52:34 INFO1 track_source: Starting to track AGES3193_p3_145 2011-Dec-14 05:52:34 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_145" 2011-Dec-14 05:52:34 LOG3 vw_send: To DATATAKING: set ra 99.74 2011-Dec-14 05:52:34 LOG3 vw_send: To DATATAKING: set dec 14.9720122755 2011-Dec-14 05:52:34 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-14 05:52:34 LOG3 vw_send: To DATATAKING: pnt tr 99.74 14.9720122755 -CF 2011-Dec-14 05:52:34 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 05:52:34 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-14 05:52:34 LOG5 finish_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2011-Dec-14 05:52:34 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-14 05:52:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 05:52:34 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-14 05:52:34 LOG5 end_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2011-Dec-14 05:52:34 LOG1 fixed_driftmap: Parameters: HA = +01:02:58.7 Start = 10:56:40.2 LST = 10:56:25.7 diff = 14.5 secs 2011-Dec-14 05:52:34 INFO2 fixed_driftmap: Waiting 12.5 seconds for RA 9:53:42 2011-Dec-14 05:52:34 INFO2 lstwait: Waiting for 12.5 secs from LST 10:56:26 to LST 10:56:38 ... 2011-Dec-14 05:52:34 LOG4 send_obs_status: To obs_status: <1> TASKTIME 12.476213361156955 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-14 05:52:34 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-14 05:52:34 LOG5 begin_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2011-Dec-14 05:52:34 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_145" 2011-Dec-14 05:52:34 LOG4 got_cormsg: From DATATAKING: set ra 99.74 2011-Dec-14 05:52:34 LOG4 got_cormsg: From DATATAKING: set dec 14.9720122755 2011-Dec-14 05:52:34 LOG4 got_cormsg: From DATATAKING: vw% 99.74 2011-Dec-14 05:52:34 LOG4 got_cormsg: From DATATAKING: vw% 14.9720122755 2011-Dec-14 05:52:34 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:52:34 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-14 05:52:34 LOG4 got_cormsg: From DATATAKING: pnt tr 99.74 14.9720122755 -CF 2011-Dec-14 05:52:34 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-14 05:52:34 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-14 05:52:34 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 05:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2011-Dec-14 05:52:47 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-14 05:52:47 LOG5 end_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2011-Dec-14 05:52:47 LOG4 lstwait: Finished waiting 0.53 seconds late 2011-Dec-14 05:52:47 INFO3 lstwait: Finished waiting 2011-Dec-14 05:52:47 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-14 05:52:47 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-14 05:52:47 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-14 05:52:47 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-14 05:52:47 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-14 05:52:47 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-14 05:52:47 LOG5 begin_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2011-Dec-14 05:52:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-14 05:52:47 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-14 05:52:47 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-14 05:52:47 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-14 05:52:47 LOG3 take_mock_data: PSET configuration: obsnm=Ellioty Gonzalez 2011-Dec-14 05:52:47 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_145 2011-Dec-14 05:52:47 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-14 05:52:47 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-14 05:52:47 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-14 05:52:47 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-14 05:52:47 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-14 05:52:47 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-14 05:52:47 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-14 05:52:47 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-14 05:52:47 LOG3 take_mock_data: PSET configuration: patternid=134800018 2011-Dec-14 05:52:47 LOG3 take_mock_data: PSET configuration: scanid=134800018 2011-Dec-14 05:52:47 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-14 05:52:47 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-14 05:52:47 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-14 05:52:47 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456364212.0 2011-Dec-14 05:52:47 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306364212.0 2011-Dec-14 05:52:47 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-14 05:52:47 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-14 05:52:47 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Ellioty Gonzalez:object=AGES3193_p3_145:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=134800018:scanid=134800018:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456364212.0:topobfreqhz=1306364212.0:filetype=1 2011-Dec-14 05:52:47 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-14 05:52:47 LOG5 begin_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2011-Dec-14 05:52:47 LOG4 from_mock: From MOCK: psetok 2011-Dec-14 05:52:47 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-14 05:52:47 LOG5 end_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2011-Dec-14 05:52:47 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-14 05:52:47 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-14 05:52:47 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-14 05:52:47 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-14 05:52:47 LOG5 begin_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2011-Dec-14 05:52:47 LOG4 from_mock: From MOCK: starok 2011-Dec-14 05:52:47 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-14 05:52:47 LOG5 end_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2011-Dec-14 05:52:47 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-14 05:52:47 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 134800018 2011-Dec-14 05:52:47 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-14 05:52:47 LOG5 begin_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2011-Dec-14 05:52:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 05:52:47 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-14 05:52:47 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-14 05:52:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-14 05:52:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35568.00 2011-Dec-14 05:52:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.364212 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 05:52:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.364212 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:52:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.364212 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:52:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.364212 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:52:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.364212 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 05:52:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.364212 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 05:52:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.364212 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 05:52:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.364212 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 05:52:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.364212 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 05:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-14 05:52:49 INFO2 got_mock_message: Mock spectrometer start file number is 01700 2011-Dec-14 05:52:49 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-14 05:52:49 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2011-Dec-14 05:52:49 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-14 05:52:49 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-14 05:52:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-14 05:52:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-14 05:52:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-14 05:52:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-14 05:52:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-14 05:52:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-14 05:52:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-14 05:52:49 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-14 05:52:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 05:52:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 05:52:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 05:52:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 05:52:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 05:52:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 05:52:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-14 05:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2011-Dec-14 05:52:52 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:52:52.01 2011-Dec-14 05:52:52 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323856372.01 Wed Dec 14 05:52:52 2011 2011-Dec-14 05:52:52 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-14 05:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2011-Dec-14 05:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-14 05:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2011-Dec-14 05:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2011-Dec-14 05:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2011-Dec-14 05:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2011-Dec-14 05:53:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-14 05:53:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.909 1.033 0.914 1.119 2011-Dec-14 05:53:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.930 1.009 1.036 1.110 2011-Dec-14 05:53:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.807 0.906 0.969 0.885 2011-Dec-14 05:53:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.106 0.024 0.961 0.024 2011-Dec-14 05:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 05:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 05:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 05:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 05:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 05:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 05:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 05:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 05:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 05:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2011-Dec-14 05:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2011-Dec-14 05:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2011-Dec-14 05:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-14 05:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-14 05:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-14 05:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-14 05:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-14 05:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 05:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 05:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2011-Dec-14 05:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2011-Dec-14 05:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 05:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2011-Dec-14 05:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-14 05:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 05:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 05:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 05:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 05:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2011-Dec-14 05:54:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-14 05:54:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.911 1.032 0.913 1.120 2011-Dec-14 05:54:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.928 1.009 1.034 1.110 2011-Dec-14 05:54:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.807 0.907 0.968 0.884 2011-Dec-14 05:54:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 0.022 0.960 0.022 2011-Dec-14 05:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 05:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 05:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 05:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 05:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-14 05:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-14 05:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 05:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-14 05:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-14 05:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-14 05:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-14 05:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-14 05:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 05:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 05:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2011-Dec-14 05:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-14 05:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 05:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 05:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2011-Dec-14 05:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 05:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 05:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2011-Dec-14 05:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-14 05:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 05:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 05:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2011-Dec-14 05:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 05:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-14 05:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 05:55:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-14 05:55:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.914 1.036 0.914 1.122 2011-Dec-14 05:55:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.931 1.013 1.037 1.115 2011-Dec-14 05:55:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.807 0.909 0.970 0.887 2011-Dec-14 05:55:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 0.023 0.962 0.023 2011-Dec-14 05:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2011-Dec-14 05:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-14 05:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-14 05:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2011-Dec-14 05:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2011-Dec-14 05:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2011-Dec-14 05:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 05:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-14 05:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 05:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 05:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-14 05:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 05:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2011-Dec-14 05:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-14 05:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-14 05:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-14 05:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-14 05:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2011-Dec-14 05:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2011-Dec-14 05:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-14 05:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2011-Dec-14 05:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2011-Dec-14 05:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2011-Dec-14 05:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.129 (still bad) 2011-Dec-14 05:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.131 (still bad) 2011-Dec-14 05:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.131 (still bad) 2011-Dec-14 05:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.132 (still bad) 2011-Dec-14 05:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.129 (still bad) 2011-Dec-14 05:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2011-Dec-14 05:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.133 (still bad) 2011-Dec-14 05:56:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-14 05:56:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.911 1.034 0.917 1.124 2011-Dec-14 05:56:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.930 1.010 1.034 1.112 2011-Dec-14 05:56:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.808 0.910 0.969 0.885 2011-Dec-14 05:56:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 0.023 0.961 0.024 2011-Dec-14 05:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 05:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 05:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2011-Dec-14 05:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 05:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2011-Dec-14 05:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 05:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 05:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 05:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-14 05:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-14 05:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2011-Dec-14 05:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2011-Dec-14 05:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2011-Dec-14 05:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-14 05:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2011-Dec-14 05:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-14 05:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.126 (still bad) 2011-Dec-14 05:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 05:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 05:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 05:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-14 05:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 05:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.129 (still bad) 2011-Dec-14 05:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 05:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 05:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 05:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 05:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 05:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.128 (still bad) 2011-Dec-14 05:57:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-14 05:57:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.912 1.034 0.914 1.121 2011-Dec-14 05:57:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.930 1.012 1.036 1.113 2011-Dec-14 05:57:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.806 0.909 0.972 0.886 2011-Dec-14 05:57:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.107 0.023 0.962 0.023 2011-Dec-14 05:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-14 05:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 05:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2011-Dec-14 05:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 05:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.128 (still bad) 2011-Dec-14 05:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 05:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-14 05:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 05:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2011-Dec-14 05:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 05:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2011-Dec-14 05:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-14 05:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2011-Dec-14 05:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2011-Dec-14 05:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2011-Dec-14 05:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-14 05:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 05:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-14 05:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-14 05:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2011-Dec-14 05:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 05:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.126 (still bad) 2011-Dec-14 05:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-14 05:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-14 05:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-14 05:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-14 05:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-14 05:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-14 05:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 05:58:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-14 05:58:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.909 1.032 0.912 1.119 2011-Dec-14 05:58:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.930 1.010 1.034 1.110 2011-Dec-14 05:58:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.806 0.908 0.969 0.885 2011-Dec-14 05:58:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.105 0.023 0.962 0.023 2011-Dec-14 05:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 05:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-14 05:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 05:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 05:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-14 05:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 05:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 05:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-14 05:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-14 05:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 05:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-14 05:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-14 05:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-14 05:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-14 05:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-14 05:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2011-Dec-14 05:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 05:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 05:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 05:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 05:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 05:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 05:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-14 05:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-14 05:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-14 05:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-14 05:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-14 05:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-14 05:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 05:59:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-14 05:59:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.910 1.034 0.914 1.119 2011-Dec-14 05:59:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.930 1.011 1.032 1.110 2011-Dec-14 05:59:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.804 0.904 0.966 0.885 2011-Dec-14 05:59:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.105 0.023 0.960 0.023 2011-Dec-14 05:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 05:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 05:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 05:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2011-Dec-14 05:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-14 05:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2011-Dec-14 05:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-14 05:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2011-Dec-14 05:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2011-Dec-14 05:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.126 (still bad) 2011-Dec-14 05:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2011-Dec-14 05:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2011-Dec-14 05:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 05:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 05:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 05:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2011-Dec-14 05:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 05:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-14 05:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 05:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2011-Dec-14 05:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 05:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2011-Dec-14 05:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-14 06:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 06:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-14 06:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2011-Dec-14 06:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 06:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.128 (still bad) 2011-Dec-14 06:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-14 06:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-14 06:00:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-14 06:00:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.915 1.037 0.916 1.123 2011-Dec-14 06:00:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.931 1.011 1.036 1.114 2011-Dec-14 06:00:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.807 0.908 0.973 0.888 2011-Dec-14 06:00:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 0.023 0.964 0.023 2011-Dec-14 06:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 06:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-14 06:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.127 (still bad) 2011-Dec-14 06:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2011-Dec-14 06:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2011-Dec-14 06:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.125 (still bad) 2011-Dec-14 06:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2011-Dec-14 06:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2011-Dec-14 06:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.130 (still bad) 2011-Dec-14 06:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 06:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 06:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.126 (still bad) 2011-Dec-14 06:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 06:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 06:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2011-Dec-14 06:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2011-Dec-14 06:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-14 06:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-14 06:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2011-Dec-14 06:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2011-Dec-14 06:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.128 (still bad) 2011-Dec-14 06:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 06:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2011-Dec-14 06:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 06:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 06:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 06:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-14 06:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2011-Dec-14 06:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-14 06:01:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-14 06:01:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.913 1.031 0.914 1.120 2011-Dec-14 06:01:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.926 1.011 1.034 1.111 2011-Dec-14 06:01:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.806 0.907 0.975 0.890 2011-Dec-14 06:01:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 0.024 0.963 0.024 2011-Dec-14 06:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-14 06:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2011-Dec-14 06:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2011-Dec-14 06:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2011-Dec-14 06:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2011-Dec-14 06:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-14 06:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-14 06:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2011-Dec-14 06:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 06:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-14 06:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-14 06:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-14 06:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-14 06:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 06:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 06:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 06:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 06:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 06:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 06:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 06:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-14 06:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-14 06:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 06:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-14 06:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 06:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-14 06:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-14 06:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2011-Dec-14 06:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2011-Dec-14 06:02:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-14 06:02:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.916 1.037 0.915 1.125 2011-Dec-14 06:02:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.929 1.012 1.036 1.114 2011-Dec-14 06:02:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.808 0.908 0.972 0.889 2011-Dec-14 06:02:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 0.024 0.964 0.024 2011-Dec-14 06:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-14 06:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2011-Dec-14 06:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2011-Dec-14 06:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-14 06:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2011-Dec-14 06:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2011-Dec-14 06:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2011-Dec-14 06:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-14 06:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 06:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 06:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 06:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2011-Dec-14 06:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 06:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2011-Dec-14 06:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2011-Dec-14 06:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2011-Dec-14 06:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2011-Dec-14 06:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2011-Dec-14 06:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2011-Dec-14 06:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2011-Dec-14 06:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 06:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 06:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.126 (still bad) 2011-Dec-14 06:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 06:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 06:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2011-Dec-14 06:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 06:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 06:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.126 (still bad) 2011-Dec-14 06:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 06:03:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-14 06:03:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.916 1.037 0.914 1.123 2011-Dec-14 06:03:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.929 1.011 1.037 1.112 2011-Dec-14 06:03:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.807 0.907 0.972 0.888 2011-Dec-14 06:03:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.106 0.023 0.961 0.023 2011-Dec-14 06:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2011-Dec-14 06:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2011-Dec-14 06:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-14 06:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2011-Dec-14 06:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2011-Dec-14 06:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2011-Dec-14 06:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2011-Dec-14 06:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2011-Dec-14 06:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2011-Dec-14 06:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2011-Dec-14 06:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2011-Dec-14 06:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-14 06:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2011-Dec-14 06:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-14 06:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 06:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-14 06:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 06:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 06:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.126 (still bad) 2011-Dec-14 06:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2011-Dec-14 06:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2011-Dec-14 06:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2011-Dec-14 06:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-14 06:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-14 06:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2011-Dec-14 06:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2011-Dec-14 06:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-14 06:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2011-Dec-14 06:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2011-Dec-14 06:04:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-14 06:04:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.913 1.034 0.918 1.128 2011-Dec-14 06:04:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.929 1.011 1.037 1.114 2011-Dec-14 06:04:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.806 0.908 0.972 0.886 2011-Dec-14 06:04:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.106 0.023 0.961 0.024 2011-Dec-14 06:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2011-Dec-14 06:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-14 06:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-14 06:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.129 (still bad) 2011-Dec-14 06:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.126 (still bad) 2011-Dec-14 06:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2011-Dec-14 06:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.131 (still bad) 2011-Dec-14 06:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2011-Dec-14 06:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2011-Dec-14 06:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2011-Dec-14 06:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2011-Dec-14 06:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2011-Dec-14 06:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.133 (still bad) 2011-Dec-14 06:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-14 06:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 06:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.126 (still bad) 2011-Dec-14 06:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 06:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 06:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.130 (still bad) 2011-Dec-14 06:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-14 06:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-14 06:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2011-Dec-14 06:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-14 06:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-14 06:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.131 (still bad) 2011-Dec-14 06:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-14 06:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2011-Dec-14 06:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2011-Dec-14 06:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2011-Dec-14 06:05:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-14 06:05:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.913 1.033 0.914 1.123 2011-Dec-14 06:05:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.930 1.011 1.037 1.113 2011-Dec-14 06:05:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.806 0.909 0.969 0.886 2011-Dec-14 06:05:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.107 0.024 0.963 0.024 2011-Dec-14 06:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2011-Dec-14 06:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-14 06:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2011-Dec-14 06:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2011-Dec-14 06:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2011-Dec-14 06:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2011-Dec-14 06:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2011-Dec-14 06:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-14 06:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-14 06:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-14 06:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2011-Dec-14 06:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2011-Dec-14 06:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.128 (still bad) 2011-Dec-14 06:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 06:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 06:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-14 06:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 06:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 06:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.132 (still bad) 2011-Dec-14 06:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.128 (still bad) 2011-Dec-14 06:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.129 (still bad) 2011-Dec-14 06:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-14 06:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-14 06:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-14 06:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-14 06:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-14 06:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.134 (still bad) 2011-Dec-14 06:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.130 (still bad) 2011-Dec-14 06:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2011-Dec-14 06:06:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-14 06:06:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.914 1.034 0.920 1.127 2011-Dec-14 06:06:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.932 1.013 1.039 1.115 2011-Dec-14 06:06:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.808 0.908 0.974 0.888 2011-Dec-14 06:06:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 0.023 0.964 0.024 2011-Dec-14 06:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2011-Dec-14 06:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-14 06:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2011-Dec-14 06:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-14 06:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2011-Dec-14 06:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2011-Dec-14 06:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 06:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 06:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 06:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 06:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 06:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 06:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 06:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 06:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 06:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 06:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 06:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 06:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 06:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 06:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 06:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 06:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 06:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 06:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-14 06:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-14 06:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 06:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2011-Dec-14 06:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.126 (still bad) 2011-Dec-14 06:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.126 (still bad) 2011-Dec-14 06:07:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-14 06:07:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.914 1.039 0.917 1.128 2011-Dec-14 06:07:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.931 1.014 1.039 1.115 2011-Dec-14 06:07:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.808 0.909 0.974 0.889 2011-Dec-14 06:07:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 0.023 0.964 0.024 2011-Dec-14 06:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-14 06:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 06:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 06:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 06:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-14 06:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-14 06:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 06:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 06:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-14 06:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-14 06:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.126 (still bad) 2011-Dec-14 06:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-14 06:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 06:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 06:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 06:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 06:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-14 06:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-14 06:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-14 06:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2011-Dec-14 06:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-14 06:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-14 06:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2011-Dec-14 06:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2011-Dec-14 06:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2011-Dec-14 06:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2011-Dec-14 06:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-14 06:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2011-Dec-14 06:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2011-Dec-14 06:08:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-14 06:08:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.913 1.036 0.917 1.125 2011-Dec-14 06:08:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.930 1.012 1.038 1.116 2011-Dec-14 06:08:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.807 0.909 0.975 0.890 2011-Dec-14 06:08:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.113 0.023 0.967 0.023 2011-Dec-14 06:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 06:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2011-Dec-14 06:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-14 06:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.126 (still bad) 2011-Dec-14 06:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.130 (still bad) 2011-Dec-14 06:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 06:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-14 06:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2011-Dec-14 06:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 06:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 06:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.130 (still bad) 2011-Dec-14 06:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2011-Dec-14 06:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-14 06:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2011-Dec-14 06:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-14 06:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2011-Dec-14 06:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.133 (still bad) 2011-Dec-14 06:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.131 (still bad) 2011-Dec-14 06:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.130 (still bad) 2011-Dec-14 06:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.134 (still bad) 2011-Dec-14 06:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.130 (still bad) 2011-Dec-14 06:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.131 (still bad) 2011-Dec-14 06:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.133 (still bad) 2011-Dec-14 06:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-14 06:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 06:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 06:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 06:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-14 06:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-14 06:09:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-14 06:09:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.913 1.037 0.917 1.124 2011-Dec-14 06:09:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.933 1.017 1.037 1.113 2011-Dec-14 06:09:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.808 0.909 0.973 0.887 2011-Dec-14 06:09:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.107 0.023 0.963 0.023 2011-Dec-14 06:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.128 (still bad) 2011-Dec-14 06:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 06:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2011-Dec-14 06:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2011-Dec-14 06:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2011-Dec-14 06:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-14 06:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-14 06:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-14 06:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-14 06:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-14 06:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-14 06:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-14 06:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-14 06:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-14 06:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-14 06:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-14 06:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-14 06:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-14 06:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-14 06:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-14 06:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-14 06:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-14 06:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2011-Dec-14 06:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2011-Dec-14 06:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2011-Dec-14 06:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2011-Dec-14 06:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2011-Dec-14 06:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-14 06:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2011-Dec-14 06:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2011-Dec-14 06:10:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-14 06:10:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.916 1.037 0.915 1.125 2011-Dec-14 06:10:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.929 1.013 1.034 1.113 2011-Dec-14 06:10:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.808 0.911 0.973 0.888 2011-Dec-14 06:10:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 0.021 0.963 0.022 2011-Dec-14 06:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2011-Dec-14 06:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2011-Dec-14 06:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2011-Dec-14 06:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.128 (still bad) 2011-Dec-14 06:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2011-Dec-14 06:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2011-Dec-14 06:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2011-Dec-14 06:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2011-Dec-14 06:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2011-Dec-14 06:10:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2011-Dec-14 06:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-14 06:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2011-Dec-14 06:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-14 06:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-14 06:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2011-Dec-14 06:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2011-Dec-14 06:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2011-Dec-14 06:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2011-Dec-14 06:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-14 06:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-14 06:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.129 (still bad) 2011-Dec-14 06:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-14 06:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-14 06:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2011-Dec-14 06:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 06:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-14 06:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.132 (still bad) 2011-Dec-14 06:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2011-Dec-14 06:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-14 06:11:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-14 06:11:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.915 1.039 0.917 1.128 2011-Dec-14 06:11:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.929 1.015 1.038 1.118 2011-Dec-14 06:11:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.808 0.912 0.973 0.889 2011-Dec-14 06:11:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.110 0.025 0.966 0.025 2011-Dec-14 06:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2011-Dec-14 06:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2011-Dec-14 06:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.131 (still bad) 2011-Dec-14 06:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-14 06:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 06:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.126 (still bad) 2011-Dec-14 06:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 06:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-14 06:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.132 (still bad) 2011-Dec-14 06:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-14 06:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 06:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2011-Dec-14 06:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 06:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-14 06:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.133 (still bad) 2011-Dec-14 06:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 06:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 06:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.129 (still bad) 2011-Dec-14 06:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 06:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 06:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.131 (still bad) 2011-Dec-14 06:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 06:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 06:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.128 (still bad) 2011-Dec-14 06:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 06:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2011-Dec-14 06:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.132 (still bad) 2011-Dec-14 06:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2011-Dec-14 06:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2011-Dec-14 06:12:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-14 06:12:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.916 1.040 0.920 1.127 2011-Dec-14 06:12:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.929 1.013 1.037 1.118 2011-Dec-14 06:12:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.807 0.911 0.976 0.891 2011-Dec-14 06:12:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.111 0.024 0.965 0.024 2011-Dec-14 06:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2011-Dec-14 06:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-14 06:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.131 (still bad) 2011-Dec-14 06:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-14 06:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2011-Dec-14 06:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2011-Dec-14 06:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2011-Dec-14 06:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2011-Dec-14 06:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2011-Dec-14 06:12:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 06:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 06:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 06:12:53 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-14 06:12:53 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-14 06:12:53 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-14 06:12:53 LOG5 end_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2011-Dec-14 06:12:53 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-14 06:12:53 LOG5 end_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2011-Dec-14 06:12:53 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-14 06:12:53 LOG5 finish_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2011-Dec-14 06:12:53 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-14 06:12:53 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-14 06:12:53 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-14 06:12:53 LOG5 end_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2011-Dec-14 06:12:53 COMMAND run_command_line: EXECUTING command 48: 'ENDIF' 2011-Dec-14 06:12:53 COMMAND run_command_line: EXECUTING command 55: 'LOAD togs_cima31.conf' 2011-Dec-14 06:12:53 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2011-Dec-14 06:12:53 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-14 06:12:53 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2011-Dec-14 06:12:53 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima31.conf' 2011-Dec-14 06:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-14 06:12:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2011-Dec-14 06:12:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2011-Dec-14 06:12:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2011-Dec-14 06:12:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2011-Dec-14 06:12:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2011-Dec-14 06:12:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2011-Dec-14 06:12:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2011-Dec-14 06:12:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2011-Dec-14 06:12:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2011-Dec-14 06:12:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2011-Dec-14 06:12:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2011-Dec-14 06:12:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-14 06:12:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-14 06:12:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-14 06:12:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-14 06:12:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2011-Dec-14 06:12:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2011-Dec-14 06:12:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2011-Dec-14 06:12:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2011-Dec-14 06:12:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2011-Dec-14 06:12:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2011-Dec-14 06:12:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2011-Dec-14 06:12:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2011-Dec-14 06:12:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-14 06:12:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-14 06:12:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-14 06:12:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-14 06:12:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2011-Dec-14 06:12:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2011-Dec-14 06:12:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2011-Dec-14 06:12:55 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-14 06:12:55 BEGIN begin_task: Starting task 'configuring IF/LO path' 2011-Dec-14 06:12:55 LOG5 begin_task: Level: (2) ID = <10278> Status = 0 0 0 0 ok 2011-Dec-14 06:12:55 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2011-Dec-14 06:12:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2011-Dec-14 06:12:55 LOG1 config_iflo: Receiver ALFA already selected 2011-Dec-14 06:12:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-14 06:12:55 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-14 06:12:55 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-14 06:12:55 LOG5 begin_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2011-Dec-14 06:12:55 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-14 06:12:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-14 06:12:55 LOG5 end_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2011-Dec-14 06:12:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-14 06:12:55 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-14 06:12:55 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2011-Dec-14 06:12:55 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2011-Dec-14 06:12:55 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2011-Dec-14 06:12:55 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2011-Dec-14 06:12:55 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2011-Dec-14 06:12:55 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2011-Dec-14 06:12:55 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2011-Dec-14 06:12:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2011-Dec-14 06:12:55 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2011-Dec-14 06:12:55 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2011-Dec-14 06:12:55 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2011-Dec-14 06:12:55 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2011-Dec-14 06:12:55 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2011-Dec-14 06:12:55 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2011-Dec-14 06:12:55 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2011-Dec-14 06:12:55 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2011-Dec-14 06:12:55 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2011-Dec-14 06:12:55 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2011-Dec-14 06:12:55 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2011-Dec-14 06:12:55 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2011-Dec-14 06:12:55 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2011-Dec-14 06:12:55 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2011-Dec-14 06:12:55 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2011-Dec-14 06:12:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:12:55 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2011-Dec-14 06:12:55 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2011-Dec-14 06:12:55 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2011-Dec-14 06:12:55 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2011-Dec-14 06:12:55 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2011-Dec-14 06:12:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2011-Dec-14 06:12:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 06:12:55 START begin_task: Starting task 'waiting on configuring IF/LO path' 2011-Dec-14 06:12:55 LOG5 begin_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2011-Dec-14 06:12:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2011-Dec-14 06:12:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2011-Dec-14 06:12:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:12:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 06:12:56 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:12:56 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:12:56 LOG4 got_cormsg: From DATATAKING: vw% DONE 2011-Dec-14 06:12:56 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2011-Dec-14 06:12:56 LOG5 end_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2011-Dec-14 06:12:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2011-Dec-14 06:12:56 STOP finish_task: Finishing task 'configuring IF/LO path' 2011-Dec-14 06:12:56 LOG5 finish_task: Level: (2) ID = <10278> Status = 0 0 0 0 ok 2011-Dec-14 06:12:56 DONE finish_task: DONE finished configuration: IF/LO path 2011-Dec-14 06:12:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-14 06:12:56 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2011-Dec-14 06:12:56 LOG5 end_task: Level: (2) ID = <10278> Status = 0 0 0 0 ok 2011-Dec-14 06:12:56 BEGIN begin_task: Starting task 'configuring WAPPs' 2011-Dec-14 06:12:56 LOG5 begin_task: Level: (2) ID = <10281> Status = 0 0 0 0 ok 2011-Dec-14 06:12:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2011-Dec-14 06:12:56 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2011-Dec-14 06:12:56 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Dec-14 06:12:56 START begin_task: Starting task 'selecting calibration port' 2011-Dec-14 06:12:56 LOG5 begin_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2011-Dec-14 06:12:56 LOG3 vw_send: To DATATAKING: calport 3 2011-Dec-14 06:12:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Dec-14 06:12:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 06:12:56 START begin_task: Starting task 'waiting on calport' 2011-Dec-14 06:12:56 LOG5 begin_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2011-Dec-14 06:12:56 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:12:57 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Dec-14 06:12:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 06:12:57 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:12:57 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-14 06:12:57 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Dec-14 06:12:57 LOG5 end_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2011-Dec-14 06:12:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Dec-14 06:12:57 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Dec-14 06:12:57 LOG5 end_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2011-Dec-14 06:12:57 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-14 06:12:57 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-14 06:12:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-14 06:12:57 LOG5 begin_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2011-Dec-14 06:12:57 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:12:57 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-14 06:12:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-14 06:12:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-14 06:12:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-14 06:12:57 LOG5 end_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2011-Dec-14 06:12:57 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2011-Dec-14 06:12:57 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2011-Dec-14 06:12:57 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2011-Dec-14 06:12:57 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2011-Dec-14 06:12:57 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2011-Dec-14 06:12:57 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2011-Dec-14 06:12:57 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2011-Dec-14 06:12:57 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2011-Dec-14 06:12:57 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 06:12:57 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 06:12:57 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 06:12:57 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 06:12:57 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Dec-14 06:12:57 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Dec-14 06:12:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-14 06:12:57 LOG5 begin_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2011-Dec-14 06:12:57 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2011-Dec-14 06:12:57 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2011-Dec-14 06:12:57 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-14 06:12:57 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Ellioty Gonzalez' 2011-Dec-14 06:12:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-14 06:12:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-14 06:12:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-14 06:12:57 LOG5 end_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2011-Dec-14 06:12:57 LOG3 sock_errsend: To WAPPDATA: FLUSH 2011-Dec-14 06:12:57 STOP finish_task: Finishing task 'configuring WAPPs' 2011-Dec-14 06:12:57 LOG5 finish_task: Level: (2) ID = <10281> Status = 0 0 0 0 ok 2011-Dec-14 06:12:57 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2011-Dec-14 06:12:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-14 06:12:57 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2011-Dec-14 06:12:57 LOG5 end_task: Level: (2) ID = <10281> Status = 0 0 0 0 ok 2011-Dec-14 06:12:57 COMMAND run_command_line: EXECUTING command 56: 'TRACKCURPOS' 2011-Dec-14 06:12:57 BEGIN begin_task: Starting task 'tracking current position' 2011-Dec-14 06:12:57 LOG5 begin_task: Level: (2) ID = <10286> Status = 0 0 0 0 ok 2011-Dec-14 06:12:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2011-Dec-14 06:12:57 INFO1 track_current_pos: Starting to track the current commanded position RA = 10:13:14.5 and Dec = +20:17:10.5 2011-Dec-14 06:12:58 LOG3 track_source: Calling 'track_source Cur-pos 101314.5 201710.5 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2011-Dec-14 06:12:58 START begin_task: Starting task 'sending tracking commands' 2011-Dec-14 06:12:58 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2011-Dec-14 06:12:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2011-Dec-14 06:12:58 INFO1 track_source: Starting to track Cur-pos 2011-Dec-14 06:12:58 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2011-Dec-14 06:12:58 LOG3 vw_send: To DATATAKING: set ra 101314.5 2011-Dec-14 06:12:58 LOG3 vw_send: To DATATAKING: set dec 201710.5 2011-Dec-14 06:12:58 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-14 06:12:58 LOG3 vw_send: To DATATAKING: pnt tr 101314.5 201710.5 -CJ 2011-Dec-14 06:12:58 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2011-Dec-14 06:12:58 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-14 06:12:58 LOG5 finish_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2011-Dec-14 06:12:58 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-14 06:12:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 06:12:58 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-14 06:12:58 LOG5 end_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2011-Dec-14 06:12:58 START begin_task: Starting task 'waiting on telescope' 2011-Dec-14 06:12:58 LOG5 begin_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2011-Dec-14 06:12:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-14 06:12:58 LOG3 waittrk: Start waittrk 5 2011-Dec-14 06:12:58 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-14 06:12:58 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2011-Dec-14 06:12:58 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2011-Dec-14 06:12:58 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2011-Dec-14 06:12:58 LOG4 got_cormsg: From DATATAKING: set ra 101314.5 2011-Dec-14 06:12:58 LOG4 got_cormsg: From DATATAKING: set dec 201710.5 2011-Dec-14 06:12:58 LOG4 got_cormsg: From DATATAKING: vw% 101314.5 2011-Dec-14 06:12:58 LOG4 got_cormsg: From DATATAKING: vw% 201710.5 2011-Dec-14 06:12:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:12:58 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-14 06:12:58 LOG4 got_cormsg: From DATATAKING: pnt tr 101314.5 201710.5 -CJ 2011-Dec-14 06:12:58 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2011-Dec-14 06:12:58 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-14 06:12:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:13:03 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-14 06:13:03 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2011-Dec-14 06:13:03 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-14 06:13:03 LOG5 begin_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2011-Dec-14 06:13:07 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-14 06:13:07 LOG5 end_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2011-Dec-14 06:13:07 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-14 06:13:07 INFO2 waittrk: Now tracking Cur-pos 2011-Dec-14 06:13:07 LOG4 waittrk: Current telescope position: Az = 99.47 ZA = 15.02 2011-Dec-14 06:13:07 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-14 06:13:07 LOG5 finish_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2011-Dec-14 06:13:07 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-14 06:13:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 06:13:07 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-14 06:13:07 LOG5 end_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2011-Dec-14 06:13:07 STOP finish_task: Finishing task 'tracking current position' 2011-Dec-14 06:13:07 LOG5 finish_task: Level: (2) ID = <10286> Status = 0 0 0 0 ok 2011-Dec-14 06:13:07 DONE finish_task: DONE finished tracking: current position 2011-Dec-14 06:13:07 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-14 06:13:07 END end_task: Finishing task 'tracking current position' with status 'OK' 2011-Dec-14 06:13:07 LOG5 end_task: Level: (2) ID = <10286> Status = 0 0 0 0 ok 2011-Dec-14 06:13:07 COMMAND run_command_line: EXECUTING command 57: 'ALFAANGLE 19' 2011-Dec-14 06:13:07 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2011-Dec-14 06:13:07 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2011-Dec-14 06:13:07 LOG5 begin_task: Level: (2) ID = <10291> Status = 0 0 0 0 ok 2011-Dec-14 06:13:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2011-Dec-14 06:13:07 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2011-Dec-14 06:13:07 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2011-Dec-14 06:13:07 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-14 06:13:07 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-14 06:13:07 LOG5 begin_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2011-Dec-14 06:14:01 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-14 06:14:01 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2011-Dec-14 06:14:01 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-14 06:14:01 LOG5 end_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2011-Dec-14 06:14:01 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-14 06:14:01 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2011-Dec-14 06:14:01 LOG5 finish_task: Level: (2) ID = <10291> Status = 0 0 0 0 ok 2011-Dec-14 06:14:01 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2011-Dec-14 06:14:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-14 06:14:01 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2011-Dec-14 06:14:01 LOG5 end_task: Level: (2) ID = <10291> Status = 0 0 0 0 ok 2011-Dec-14 06:14:01 COMMAND run_command_line: EXECUTING command 61: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2011-Dec-14 06:14:01 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2011-Dec-14 06:14:01 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-14 06:14:01 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2011-Dec-14 06:14:01 BEGIN begin_task: Starting task 'smart frequency switching' 2011-Dec-14 06:14:01 LOG5 begin_task: Level: (2) ID = <10293> Status = 0 0 0 0 ok 2011-Dec-14 06:14:01 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2011-Dec-14 06:14:02 INFO1 smartfreq: Starting pattern: Smart frequency switching 2011-Dec-14 06:14:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2011-Dec-14 06:14:02 START begin_task: Starting task 'selecting calibration type' 2011-Dec-14 06:14:02 LOG5 begin_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2011-Dec-14 06:14:02 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-14 06:14:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-14 06:14:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 06:14:02 START begin_task: Starting task 'waiting on setcal' 2011-Dec-14 06:14:02 LOG5 begin_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2011-Dec-14 06:14:02 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-14 06:14:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 06:14:02 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:14:02 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-14 06:14:02 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-14 06:14:02 LOG5 end_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2011-Dec-14 06:14:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-14 06:14:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-14 06:14:02 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-14 06:14:02 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-14 06:14:02 LOG5 begin_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2011-Dec-14 06:14:02 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:14:02 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-14 06:14:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-14 06:14:02 LOG5 end_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2011-Dec-14 06:14:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-14 06:14:02 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-14 06:14:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-14 06:14:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-14 06:14:02 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-14 06:14:02 LOG5 begin_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2011-Dec-14 06:14:02 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-14 06:14:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-14 06:14:02 LOG5 end_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2011-Dec-14 06:14:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-14 06:14:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-14 06:14:02 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-14 06:14:02 LOG5 end_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2011-Dec-14 06:14:02 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 06:14:02 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 06:14:02 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 06:14:02 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Ellioty Gonzalez 2011-Dec-14 06:14:02 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2011-Dec-14 06:14:02 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-14 06:14:02 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2011-Dec-14 06:14:02 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-14 06:14:02 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-14 06:14:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-14 06:14:02 LOG5 begin_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2011-Dec-14 06:14:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Ellioty Gonzalez' 2011-Dec-14 06:14:02 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-14 06:14:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-14 06:14:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-14 06:14:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-14 06:14:02 LOG5 end_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2011-Dec-14 06:14:02 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2011-Dec-14 06:14:02 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-14 06:14:02 LOG5 begin_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2011-Dec-14 06:14:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2011-Dec-14 06:14:02 INFO2 adjust_power: Starting to adjust WAPP power 2011-Dec-14 06:14:02 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-14 06:14:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-14 06:14:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 06:14:03 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-14 06:14:03 LOG5 begin_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2011-Dec-14 06:14:03 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-14 06:14:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-14 06:14:03 NOTE WAPPDATA-new_file: New FITS file: wapp.20111214.a2048.0006.fits 2011-Dec-14 06:14:03 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111214.a2048.0006.fits} 2011-Dec-14 06:14:06 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:14:06 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-14 06:14:06 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-14 06:14:06 LOG5 end_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2011-Dec-14 06:14:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-14 06:14:06 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-14 06:14:06 LOG5 begin_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2011-Dec-14 06:14:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-14 06:14:06 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-14 06:14:06 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-14 06:14:06 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-14 06:14:06 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-14 06:14:06 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-14 06:14:06 LOG5 begin_task: Level: (5) ID = <10302> Status = 0 0 0 0 ok 2011-Dec-14 06:14:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-14 06:14:06 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:14:06 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 8 6 dB 2011-Dec-14 06:14:06 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 3 3 dB 2011-Dec-14 06:14:06 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 3 dB 2011-Dec-14 06:14:06 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2011-Dec-14 06:14:06 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-14 06:14:06 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-14 06:14:06 LOG5 end_task: Level: (5) ID = <10302> Status = 0 0 0 0 ok 2011-Dec-14 06:14:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.900 1.060 ALFA beam 1: 0.935 0.975 2011-Dec-14 06:14:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.904 1.040 ALFA beam 3: 1.031 0.902 2011-Dec-14 06:14:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.811 0.903 ALFA beam 5: 0.917 1.066 2011-Dec-14 06:14:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.096 0.014 ALFA beam 7: 0.952 0.014 2011-Dec-14 06:14:06 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-14 06:14:06 LOG5 finish_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2011-Dec-14 06:14:06 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-14 06:14:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 06:14:06 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-14 06:14:06 LOG5 end_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2011-Dec-14 06:14:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-14 06:14:06 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-14 06:14:06 LOG5 finish_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2011-Dec-14 06:14:06 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2011-Dec-14 06:14:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-14 06:14:06 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-14 06:14:06 LOG5 end_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2011-Dec-14 06:14:07 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2011-Dec-14 06:14:07 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-14 06:14:07 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2011-Dec-14 06:14:07 LOG5 antvel: Calling 'antvel 101314.500000 201710.500000 J Topocentric 0' 2011-Dec-14 06:14:07 LOG2 antvel: Precessing RA = 10:13:14.5 Dec = +20:17:10.5 Epoch = 2011.95348 J 2011-Dec-14 06:14:07 LOG2 antvel: Computed apparent RA = 10:13:55.4 Dec = +20:13:23.3 2011-Dec-14 06:14:07 LOG2 antvel: Parameters to Doppler: Topocentric 36846 2011 348 0.0 2011-Dec-14 06:14:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-14 06:14:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2011-Dec-14 06:14:07 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2011-Dec-14 06:14:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-14 06:14:07 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-14 06:14:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-14 06:14:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:14:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2011-Dec-14 06:14:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-14 06:14:07 LOG5 begin_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2011-Dec-14 06:14:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-14 06:14:07 LOG5 log_alfabeam: Parameters: 10.220694444444444 20.286250000000003 11.300630 2011.953483344741 18.999933 2011-Dec-14 06:14:07 LOG4 log_alfabeam: ALFABEAM 0 10.220694444444446 20.286250000000006 2011-Dec-14 06:14:07 LOG4 log_alfabeam: ALFABEAM 1 10.228209275039275 20.295614743295832 2011-Dec-14 06:14:07 LOG4 log_alfabeam: ALFABEAM 2 10.223635104125444 20.369604055664198 2011-Dec-14 06:14:07 LOG4 log_alfabeam: ALFABEAM 3 10.216113618938301 20.360584602257653 2011-Dec-14 06:14:07 LOG4 log_alfabeam: ALFABEAM 4 10.213180667254408 20.276578421578456 2011-Dec-14 06:14:07 LOG4 log_alfabeam: ALFABEAM 5 10.217788786705713 20.202465704068985 2011-Dec-14 06:14:07 LOG4 log_alfabeam: ALFABEAM 6 10.225295789395567 20.212482177265372 2011-Dec-14 06:14:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134800019 2011-Dec-14 06:14:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-14 06:14:07 LOG5 begin_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2011-Dec-14 06:14:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 06:14:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-14 06:14:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:14:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:14:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:14:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-14 06:14:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36848.00 2011-Dec-14 06:14:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 06:14:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:14:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:14:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:14:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:14:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:14:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:14:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 06:14:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 06:14:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-14 06:14:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.900 1.060 0.935 0.975 2011-Dec-14 06:14:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.904 1.062 1.063 0.902 2011-Dec-14 06:14:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.805 0.901 0.943 1.096 2011-Dec-14 06:14:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 0.014 0.952 0.014 2011-Dec-14 06:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.098 (still bad) 2011-Dec-14 06:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-14 06:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-14 06:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.097 (still bad) 2011-Dec-14 06:14:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 06:14:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-14 06:14:18 LOG5 end_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2011-Dec-14 06:14:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-14 06:14:18 LOG5 end_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2011-Dec-14 06:14:18 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2011-Dec-14 06:14:18 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-14 06:14:18 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2011-Dec-14 06:14:18 LOG5 antvel: Calling 'antvel 101314.500000 201710.500000 J Topocentric 0' 2011-Dec-14 06:14:18 LOG2 antvel: Precessing RA = 10:13:14.5 Dec = +20:17:10.5 Epoch = 2011.95348 J 2011-Dec-14 06:14:18 LOG2 antvel: Computed apparent RA = 10:13:55.4 Dec = +20:13:23.3 2011-Dec-14 06:14:18 LOG2 antvel: Parameters to Doppler: Topocentric 36857 2011 348 0.0 2011-Dec-14 06:14:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-14 06:14:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2011-Dec-14 06:14:18 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2011-Dec-14 06:14:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-14 06:14:18 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-14 06:14:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-14 06:14:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:14:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2011-Dec-14 06:14:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-14 06:14:18 LOG5 begin_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2011-Dec-14 06:14:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-14 06:14:18 LOG5 log_alfabeam: Parameters: 10.220694444444444 20.286250000000003 11.303694 2011.9534836933101 18.999933 2011-Dec-14 06:14:18 LOG4 log_alfabeam: ALFABEAM 0 10.220694444444444 20.286249999999999 2011-Dec-14 06:14:18 LOG4 log_alfabeam: ALFABEAM 1 10.228208952020058 20.295666428318103 2011-Dec-14 06:14:18 LOG4 log_alfabeam: ALFABEAM 2 10.223632178898335 20.369624756679030 2011-Dec-14 06:14:18 LOG4 log_alfabeam: ALFABEAM 3 10.216111016274196 20.360552423475728 2011-Dec-14 06:14:18 LOG4 log_alfabeam: ALFABEAM 4 10.213181002901910 20.276527436356179 2011-Dec-14 06:14:18 LOG4 log_alfabeam: ALFABEAM 5 10.217791630027019 20.202446478803932 2011-Dec-14 06:14:18 LOG4 log_alfabeam: ALFABEAM 6 10.225298297559290 20.212512743947666 2011-Dec-14 06:14:18 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134800020 2011-Dec-14 06:14:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-14 06:14:18 LOG5 begin_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2011-Dec-14 06:14:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 06:14:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-14 06:14:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:14:18 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:14:18 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:14:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36859.00 2011-Dec-14 06:14:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-14 06:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-14 06:14:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 06:14:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:14:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:14:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:14:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:14:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:14:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:14:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 06:14:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 06:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-14 06:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-14 06:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-14 06:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-14 06:14:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 06:14:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-14 06:14:29 LOG5 end_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2011-Dec-14 06:14:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-14 06:14:29 LOG5 end_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2011-Dec-14 06:14:29 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2011-Dec-14 06:14:29 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-14 06:14:29 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2011-Dec-14 06:14:29 LOG5 antvel: Calling 'antvel 101314.500000 201710.500000 J Topocentric 0' 2011-Dec-14 06:14:29 LOG2 antvel: Precessing RA = 10:13:14.5 Dec = +20:17:10.5 Epoch = 2011.95348 J 2011-Dec-14 06:14:29 LOG2 antvel: Computed apparent RA = 10:13:55.4 Dec = +20:13:23.3 2011-Dec-14 06:14:29 LOG2 antvel: Parameters to Doppler: Topocentric 36868 2011 348 0.0 2011-Dec-14 06:14:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-14 06:14:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2011-Dec-14 06:14:29 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2011-Dec-14 06:14:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-14 06:14:29 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-14 06:14:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-14 06:14:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:14:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2011-Dec-14 06:14:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-14 06:14:29 LOG5 begin_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2011-Dec-14 06:14:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-14 06:14:29 LOG5 log_alfabeam: Parameters: 10.220694444444444 20.286250000000003 11.306758 2011.9534840418789 18.999933 2011-Dec-14 06:14:29 LOG4 log_alfabeam: ALFABEAM 0 10.220694444444440 20.286249999999992 2011-Dec-14 06:14:29 LOG4 log_alfabeam: ALFABEAM 1 10.228208628507927 20.295717903886860 2011-Dec-14 06:14:29 LOG4 log_alfabeam: ALFABEAM 2 10.223629264707361 20.369645353798568 2011-Dec-14 06:14:29 LOG4 log_alfabeam: ALFABEAM 3 10.216108425211331 20.360520356751440 2011-Dec-14 06:14:29 LOG4 log_alfabeam: ALFABEAM 4 10.213181338944008 20.276476656873271 2011-Dec-14 06:14:29 LOG4 log_alfabeam: ALFABEAM 5 10.217794462680061 20.202427348555659 2011-Dec-14 06:14:29 LOG4 log_alfabeam: ALFABEAM 6 10.225300794723982 20.212543206405670 2011-Dec-14 06:14:29 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134800021 2011-Dec-14 06:14:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-14 06:14:29 LOG5 begin_task: Level: (4) ID = <10308> Status = 0 0 0 0 ok 2011-Dec-14 06:14:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 06:14:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-14 06:14:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:14:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:14:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-14 06:14:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-14 06:14:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36870.00 2011-Dec-14 06:14:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 06:14:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:14:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:14:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:14:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:14:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:14:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:14:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 06:14:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 06:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.133 (still bad) 2011-Dec-14 06:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.133 (still bad) 2011-Dec-14 06:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-14 06:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-14 06:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-14 06:14:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 06:14:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-14 06:14:40 LOG5 end_task: Level: (4) ID = <10308> Status = 0 0 0 0 ok 2011-Dec-14 06:14:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-14 06:14:40 LOG5 end_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2011-Dec-14 06:14:40 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2011-Dec-14 06:14:40 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-14 06:14:40 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2011-Dec-14 06:14:40 LOG5 antvel: Calling 'antvel 101314.500000 201710.500000 J Topocentric 0' 2011-Dec-14 06:14:40 LOG2 antvel: Precessing RA = 10:13:14.5 Dec = +20:17:10.5 Epoch = 2011.95348 J 2011-Dec-14 06:14:40 LOG2 antvel: Computed apparent RA = 10:13:55.4 Dec = +20:13:23.3 2011-Dec-14 06:14:40 LOG2 antvel: Parameters to Doppler: Topocentric 36880 2011 348 0.0 2011-Dec-14 06:14:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-14 06:14:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2011-Dec-14 06:14:40 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2011-Dec-14 06:14:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-14 06:14:40 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-14 06:14:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-14 06:14:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:14:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2011-Dec-14 06:14:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-14 06:14:40 LOG5 begin_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2011-Dec-14 06:14:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-14 06:14:40 LOG5 log_alfabeam: Parameters: 10.220694444444444 20.286250000000003 11.310100 2011.9534844221362 18.999933 2011-Dec-14 06:14:40 LOG4 log_alfabeam: ALFABEAM 0 10.220694444444446 20.286249999999999 2011-Dec-14 06:14:40 LOG4 log_alfabeam: ALFABEAM 1 10.228208275093554 20.295773813137068 2011-Dec-14 06:14:40 LOG4 log_alfabeam: ALFABEAM 2 10.223626098586939 20.369667702361426 2011-Dec-14 06:14:40 LOG4 log_alfabeam: ALFABEAM 3 10.216105612167439 20.360485507323592 2011-Dec-14 06:14:40 LOG4 log_alfabeam: ALFABEAM 4 10.213181705914398 20.276421502665833 2011-Dec-14 06:14:40 LOG4 log_alfabeam: ALFABEAM 5 10.217797540281126 20.202406589925197 2011-Dec-14 06:14:40 LOG4 log_alfabeam: ALFABEAM 6 10.225303506030260 20.212576314874987 2011-Dec-14 06:14:40 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134800022 2011-Dec-14 06:14:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-14 06:14:41 LOG5 begin_task: Level: (4) ID = <10310> Status = 0 0 0 0 ok 2011-Dec-14 06:14:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 06:14:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-14 06:14:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:14:41 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:14:41 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:14:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-14 06:14:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36882.00 2011-Dec-14 06:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-14 06:14:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 06:14:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:14:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:14:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:14:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:14:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:14:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:14:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 06:14:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 06:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2011-Dec-14 06:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.134 (still bad) 2011-Dec-14 06:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.126 (still bad) 2011-Dec-14 06:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 06:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.126 (still bad) 2011-Dec-14 06:14:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 06:14:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-14 06:14:52 LOG5 end_task: Level: (4) ID = <10310> Status = 0 0 0 0 ok 2011-Dec-14 06:14:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-14 06:14:52 LOG5 end_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2011-Dec-14 06:14:52 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2011-Dec-14 06:14:52 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-14 06:14:52 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2011-Dec-14 06:14:52 LOG5 antvel: Calling 'antvel 101314.500000 201710.500000 J Topocentric 0' 2011-Dec-14 06:14:52 LOG2 antvel: Precessing RA = 10:13:14.5 Dec = +20:17:10.5 Epoch = 2011.95348 J 2011-Dec-14 06:14:52 LOG2 antvel: Computed apparent RA = 10:13:55.4 Dec = +20:13:23.3 2011-Dec-14 06:14:52 LOG2 antvel: Parameters to Doppler: Topocentric 36892 2011 348 0.0 2011-Dec-14 06:14:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-14 06:14:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2011-Dec-14 06:14:52 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2011-Dec-14 06:14:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-14 06:14:52 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-14 06:14:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-14 06:14:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:14:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2011-Dec-14 06:14:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-14 06:14:52 LOG5 begin_task: Level: (3) ID = <10311> Status = 0 0 0 0 ok 2011-Dec-14 06:14:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-14 06:14:52 LOG5 log_alfabeam: Parameters: 10.220694444444444 20.286250000000003 11.313442 2011.9534848023932 18.999933 2011-Dec-14 06:14:52 LOG4 log_alfabeam: ALFABEAM 0 10.220694444444446 20.286250000000006 2011-Dec-14 06:14:52 LOG4 log_alfabeam: ALFABEAM 1 10.228207921118715 20.295829477558119 2011-Dec-14 06:14:52 LOG4 log_alfabeam: ALFABEAM 2 10.223622945374348 20.369689929650495 2011-Dec-14 06:14:52 LOG4 log_alfabeam: ALFABEAM 3 10.216102812675048 20.360450789051267 2011-Dec-14 06:14:52 LOG4 log_alfabeam: ALFABEAM 4 10.213182073331007 20.276366588942970 2011-Dec-14 06:14:52 LOG4 log_alfabeam: ALFABEAM 5 10.217800605405982 20.202385942203033 2011-Dec-14 06:14:52 LOG4 log_alfabeam: ALFABEAM 6 10.225306204487588 20.212609301366623 2011-Dec-14 06:14:52 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134800023 2011-Dec-14 06:14:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-14 06:14:53 LOG5 begin_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2011-Dec-14 06:14:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 06:14:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-14 06:14:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:14:53 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:14:53 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:14:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-14 06:14:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36894.00 2011-Dec-14 06:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.126 (still bad) 2011-Dec-14 06:14:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 06:14:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:14:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:14:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:14:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:14:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:14:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:14:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 06:14:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 06:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.104 (still bad) 2011-Dec-14 06:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.112 (still bad) 2011-Dec-14 06:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.105 (still bad) 2011-Dec-14 06:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.103 (still bad) 2011-Dec-14 06:15:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 06:15:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-14 06:15:04 LOG5 end_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2011-Dec-14 06:15:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-14 06:15:04 LOG5 end_task: Level: (3) ID = <10311> Status = 0 0 0 0 ok 2011-Dec-14 06:15:04 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2011-Dec-14 06:15:04 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-14 06:15:04 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2011-Dec-14 06:15:04 LOG5 antvel: Calling 'antvel 101314.500000 201710.500000 J Topocentric 0' 2011-Dec-14 06:15:04 LOG2 antvel: Precessing RA = 10:13:14.5 Dec = +20:17:10.5 Epoch = 2011.95349 J 2011-Dec-14 06:15:04 LOG2 antvel: Computed apparent RA = 10:13:55.4 Dec = +20:13:23.3 2011-Dec-14 06:15:04 LOG2 antvel: Parameters to Doppler: Topocentric 36904 2011 348 0.0 2011-Dec-14 06:15:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-14 06:15:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2011-Dec-14 06:15:04 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2011-Dec-14 06:15:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-14 06:15:04 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-14 06:15:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-14 06:15:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:15:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2011-Dec-14 06:15:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-14 06:15:04 LOG5 begin_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2011-Dec-14 06:15:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-14 06:15:04 LOG5 log_alfabeam: Parameters: 10.220694444444444 20.286250000000003 11.316785 2011.9534851826502 18.999933 2011-Dec-14 06:15:04 LOG4 log_alfabeam: ALFABEAM 0 10.220694444444446 20.286250000000006 2011-Dec-14 06:15:04 LOG4 log_alfabeam: ALFABEAM 1 10.228207566490344 20.295884915930724 2011-Dec-14 06:15:04 LOG4 log_alfabeam: ALFABEAM 2 10.223619804018027 20.369712043455316 2011-Dec-14 06:15:04 LOG4 log_alfabeam: ALFABEAM 3 10.216100025774212 20.360416190495521 2011-Dec-14 06:15:04 LOG4 log_alfabeam: ALFABEAM 4 10.213182441292236 20.276311897184645 2011-Dec-14 06:15:04 LOG4 log_alfabeam: ALFABEAM 5 10.217803659076917 20.202365398168666 2011-Dec-14 06:15:04 LOG4 log_alfabeam: ALFABEAM 6 10.225308891018861 20.212642176732590 2011-Dec-14 06:15:04 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134800024 2011-Dec-14 06:15:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-14 06:15:05 LOG5 begin_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2011-Dec-14 06:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.104 (still bad) 2011-Dec-14 06:15:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 06:15:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-14 06:15:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:15:05 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:15:05 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:15:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-14 06:15:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36906.00 2011-Dec-14 06:15:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 06:15:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:15:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:15:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:15:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:15:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:15:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:15:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 06:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.104 (still bad) 2011-Dec-14 06:15:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 06:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.100 (still bad) 2011-Dec-14 06:15:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-14 06:15:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.911 1.080 0.947 0.989 2011-Dec-14 06:15:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.914 1.052 1.050 0.917 2011-Dec-14 06:15:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.823 0.920 0.930 1.099 2011-Dec-14 06:15:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.110 0.023 0.966 0.020 2011-Dec-14 06:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2011-Dec-14 06:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.100 (still bad) 2011-Dec-14 06:15:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 06:15:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-14 06:15:16 LOG5 end_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2011-Dec-14 06:15:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-14 06:15:16 LOG5 end_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2011-Dec-14 06:15:16 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2011-Dec-14 06:15:16 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-14 06:15:16 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2011-Dec-14 06:15:16 LOG5 antvel: Calling 'antvel 101314.500000 201710.500000 J Topocentric 0' 2011-Dec-14 06:15:16 LOG2 antvel: Precessing RA = 10:13:14.5 Dec = +20:17:10.5 Epoch = 2011.95349 J 2011-Dec-14 06:15:16 LOG2 antvel: Computed apparent RA = 10:13:55.4 Dec = +20:13:23.3 2011-Dec-14 06:15:16 LOG2 antvel: Parameters to Doppler: Topocentric 36916 2011 348 0.0 2011-Dec-14 06:15:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-14 06:15:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2011-Dec-14 06:15:16 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2011-Dec-14 06:15:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-14 06:15:16 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-14 06:15:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-14 06:15:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:15:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2011-Dec-14 06:15:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-14 06:15:16 LOG5 begin_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2011-Dec-14 06:15:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-14 06:15:16 LOG5 log_alfabeam: Parameters: 10.220694444444444 20.286250000000003 11.320127 2011.9534855629072 18.999933 2011-Dec-14 06:15:16 LOG4 log_alfabeam: ALFABEAM 0 10.220694444444440 20.286250000000006 2011-Dec-14 06:15:16 LOG4 log_alfabeam: ALFABEAM 1 10.228207211433451 20.295940097295343 2011-Dec-14 06:15:16 LOG4 log_alfabeam: ALFABEAM 2 10.223616676284795 20.369734031723254 2011-Dec-14 06:15:16 LOG4 log_alfabeam: ALFABEAM 3 10.216097253005524 20.360381731258357 2011-Dec-14 06:15:16 LOG4 log_alfabeam: ALFABEAM 4 10.213182809566451 20.276257457941316 2011-Dec-14 06:15:16 LOG4 log_alfabeam: ALFABEAM 5 10.217806699576455 20.202344969035323 2011-Dec-14 06:15:16 LOG4 log_alfabeam: ALFABEAM 6 10.225311564136488 20.212674922329771 2011-Dec-14 06:15:16 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134800025 2011-Dec-14 06:15:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-14 06:15:17 LOG5 begin_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2011-Dec-14 06:15:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 06:15:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-14 06:15:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:15:17 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:15:17 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2011-Dec-14 06:15:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-14 06:15:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36918.00 2011-Dec-14 06:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 06:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 06:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 06:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2011-Dec-14 06:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2011-Dec-14 06:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2011-Dec-14 06:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.103 (still bad) 2011-Dec-14 06:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2011-Dec-14 06:15:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 06:15:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-14 06:15:28 LOG5 end_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2011-Dec-14 06:15:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-14 06:15:28 LOG5 end_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2011-Dec-14 06:15:28 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2011-Dec-14 06:15:28 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-14 06:15:28 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-14 06:15:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-14 06:15:28 LOG5 begin_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2011-Dec-14 06:15:28 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-14 06:15:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-14 06:15:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-14 06:15:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-14 06:15:28 LOG5 end_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2011-Dec-14 06:15:28 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2011-Dec-14 06:15:28 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2011-Dec-14 06:15:28 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2011-Dec-14 06:15:28 LOG5 antvel: Calling 'antvel 101314.500000 201710.500000 J Topocentric 0' 2011-Dec-14 06:15:28 LOG2 antvel: Precessing RA = 10:13:14.5 Dec = +20:17:10.5 Epoch = 2011.95349 J 2011-Dec-14 06:15:28 LOG2 antvel: Computed apparent RA = 10:13:55.4 Dec = +20:13:23.3 2011-Dec-14 06:15:28 LOG2 antvel: Parameters to Doppler: Topocentric 36928 2011 348 0.0 2011-Dec-14 06:15:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-14 06:15:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2011-Dec-14 06:15:28 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2011-Dec-14 06:15:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-14 06:15:28 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-14 06:15:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-14 06:15:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:15:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2011-Dec-14 06:15:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-14 06:15:28 LOG5 begin_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2011-Dec-14 06:15:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2011-Dec-14 06:15:28 LOG5 log_alfabeam: Parameters: 10.220694444444444 20.286250000000003 11.323470 2011.9534859431642 18.999933 2011-Dec-14 06:15:28 LOG4 log_alfabeam: ALFABEAM 0 10.220694444444446 20.286249999999999 2011-Dec-14 06:15:28 LOG4 log_alfabeam: ALFABEAM 1 10.228206855748137 20.295995056856828 2011-Dec-14 06:15:28 LOG4 log_alfabeam: ALFABEAM 2 10.223613560191609 20.369755908775403 2011-Dec-14 06:15:28 LOG4 log_alfabeam: ALFABEAM 3 10.216094492584453 20.360347389632054 2011-Dec-14 06:15:28 LOG4 log_alfabeam: ALFABEAM 4 10.213183178362835 20.276203236489408 2011-Dec-14 06:15:28 LOG4 log_alfabeam: ALFABEAM 5 10.217809728832419 20.202324641513442 2011-Dec-14 06:15:28 LOG4 log_alfabeam: ALFABEAM 6 10.225314225558460 20.212707558769040 2011-Dec-14 06:15:28 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134800026 2011-Dec-14 06:15:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-14 06:15:29 LOG5 begin_task: Level: (4) ID = <10319> Status = 0 0 0 0 ok 2011-Dec-14 06:15:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 06:15:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-14 06:15:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:15:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:15:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:15:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2011-Dec-14 06:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.103 (still bad) 2011-Dec-14 06:15:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36930.00 2011-Dec-14 06:15:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 06:15:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:15:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:15:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:15:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:15:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:15:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:15:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 06:15:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 06:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.103 (still bad) 2011-Dec-14 06:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.489 (still bad) 2011-Dec-14 06:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.497 (still bad) 2011-Dec-14 06:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.488 (still bad) 2011-Dec-14 06:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.492 (still bad) 2011-Dec-14 06:15:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 06:15:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-14 06:15:40 LOG5 end_task: Level: (4) ID = <10319> Status = 0 0 0 0 ok 2011-Dec-14 06:15:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-14 06:15:40 LOG5 end_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2011-Dec-14 06:15:40 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2011-Dec-14 06:15:40 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2011-Dec-14 06:15:40 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2011-Dec-14 06:15:40 LOG5 antvel: Calling 'antvel 101314.500000 201710.500000 J Topocentric 0' 2011-Dec-14 06:15:40 LOG2 antvel: Precessing RA = 10:13:14.5 Dec = +20:17:10.5 Epoch = 2011.95349 J 2011-Dec-14 06:15:40 LOG2 antvel: Computed apparent RA = 10:13:55.4 Dec = +20:13:23.3 2011-Dec-14 06:15:40 LOG2 antvel: Parameters to Doppler: Topocentric 36940 2011 348 0.0 2011-Dec-14 06:15:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-14 06:15:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2011-Dec-14 06:15:40 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2011-Dec-14 06:15:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-14 06:15:40 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-14 06:15:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-14 06:15:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:15:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2011-Dec-14 06:15:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-14 06:15:40 LOG5 begin_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2011-Dec-14 06:15:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2011-Dec-14 06:15:40 LOG5 log_alfabeam: Parameters: 10.220694444444444 20.286250000000003 11.326812 2011.9534863234214 18.999933 2011-Dec-14 06:15:40 LOG4 log_alfabeam: ALFABEAM 0 10.220694444444444 20.286249999999985 2011-Dec-14 06:15:40 LOG4 log_alfabeam: ALFABEAM 1 10.228206499659475 20.296049763890036 2011-Dec-14 06:15:40 LOG4 log_alfabeam: ALFABEAM 2 10.223610457492716 20.369777662670426 2011-Dec-14 06:15:40 LOG4 log_alfabeam: ALFABEAM 3 10.216091746038868 20.360313185088263 2011-Dec-14 06:15:40 LOG4 log_alfabeam: ALFABEAM 4 10.213183547449754 20.276149263149268 2011-Dec-14 06:15:40 LOG4 log_alfabeam: ALFABEAM 5 10.217812745139438 20.202304426714580 2011-Dec-14 06:15:40 LOG4 log_alfabeam: ALFABEAM 6 10.225316873809255 20.212740067528358 2011-Dec-14 06:15:40 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134800027 2011-Dec-14 06:15:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-14 06:15:41 LOG5 begin_task: Level: (4) ID = <10321> Status = 0 0 0 0 ok 2011-Dec-14 06:15:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 06:15:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-14 06:15:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:15:41 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:15:41 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:15:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2011-Dec-14 06:15:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36942.00 2011-Dec-14 06:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.494 (still bad) 2011-Dec-14 06:15:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 06:15:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:15:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:15:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:15:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:15:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:15:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:15:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 06:15:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 06:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.587 (still bad) 2011-Dec-14 06:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.591 (still bad) 2011-Dec-14 06:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.592 (still bad) 2011-Dec-14 06:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.587 (still bad) 2011-Dec-14 06:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.589 (still bad) 2011-Dec-14 06:15:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 06:15:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-14 06:15:52 LOG5 end_task: Level: (4) ID = <10321> Status = 0 0 0 0 ok 2011-Dec-14 06:15:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-14 06:15:52 LOG5 end_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2011-Dec-14 06:15:52 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2011-Dec-14 06:15:52 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2011-Dec-14 06:15:52 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2011-Dec-14 06:15:52 LOG5 antvel: Calling 'antvel 101314.500000 201710.500000 J Topocentric 0' 2011-Dec-14 06:15:52 LOG2 antvel: Precessing RA = 10:13:14.5 Dec = +20:17:10.5 Epoch = 2011.95349 J 2011-Dec-14 06:15:52 LOG2 antvel: Computed apparent RA = 10:13:55.4 Dec = +20:13:23.3 2011-Dec-14 06:15:52 LOG2 antvel: Parameters to Doppler: Topocentric 36952 2011 348 0.0 2011-Dec-14 06:15:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-14 06:15:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2011-Dec-14 06:15:52 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2011-Dec-14 06:15:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-14 06:15:52 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-14 06:15:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-14 06:15:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:15:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2011-Dec-14 06:15:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-14 06:15:52 LOG5 begin_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2011-Dec-14 06:15:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2011-Dec-14 06:15:52 LOG5 log_alfabeam: Parameters: 10.220694444444444 20.286250000000003 11.330155 2011.9534867036784 18.999933 2011-Dec-14 06:15:52 LOG4 log_alfabeam: ALFABEAM 0 10.220694444444447 20.286249999999999 2011-Dec-14 06:15:52 LOG4 log_alfabeam: ALFABEAM 1 10.228206142966419 20.296104253264630 2011-Dec-14 06:15:52 LOG4 log_alfabeam: ALFABEAM 2 10.223607366222565 20.369799307559386 2011-Dec-14 06:15:52 LOG4 log_alfabeam: ALFABEAM 3 10.216089011603012 20.360279096094683 2011-Dec-14 06:15:52 LOG4 log_alfabeam: ALFABEAM 4 10.213183917037361 20.276095503526619 2011-Dec-14 06:15:52 LOG4 log_alfabeam: ALFABEAM 5 10.217815750408393 20.202284311504787 2011-Dec-14 06:15:52 LOG4 log_alfabeam: ALFABEAM 6 10.225319510589067 20.212772469055206 2011-Dec-14 06:15:52 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134800028 2011-Dec-14 06:15:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-14 06:15:53 LOG5 begin_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2011-Dec-14 06:15:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 06:15:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-14 06:15:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:15:53 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:15:53 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:15:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2011-Dec-14 06:15:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36954.00 2011-Dec-14 06:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.591 (still bad) 2011-Dec-14 06:15:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 06:15:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:15:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:15:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:15:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:15:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:15:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:15:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 06:15:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 06:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.588 (still bad) 2011-Dec-14 06:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.596 (still bad) 2011-Dec-14 06:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.587 (still bad) 2011-Dec-14 06:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.586 (still bad) 2011-Dec-14 06:16:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 06:16:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-14 06:16:04 LOG5 end_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2011-Dec-14 06:16:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-14 06:16:04 LOG5 end_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2011-Dec-14 06:16:04 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2011-Dec-14 06:16:04 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2011-Dec-14 06:16:04 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2011-Dec-14 06:16:04 LOG5 antvel: Calling 'antvel 101314.500000 201710.500000 J Topocentric 0' 2011-Dec-14 06:16:04 LOG2 antvel: Precessing RA = 10:13:14.5 Dec = +20:17:10.5 Epoch = 2011.95349 J 2011-Dec-14 06:16:04 LOG2 antvel: Computed apparent RA = 10:13:55.4 Dec = +20:13:23.3 2011-Dec-14 06:16:04 LOG2 antvel: Parameters to Doppler: Topocentric 36964 2011 348 0.0 2011-Dec-14 06:16:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-14 06:16:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2011-Dec-14 06:16:04 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2011-Dec-14 06:16:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-14 06:16:04 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-14 06:16:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-14 06:16:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:16:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2011-Dec-14 06:16:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-14 06:16:04 LOG5 begin_task: Level: (3) ID = <10324> Status = 0 0 0 0 ok 2011-Dec-14 06:16:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2011-Dec-14 06:16:04 LOG5 log_alfabeam: Parameters: 10.220694444444444 20.286250000000003 11.333497 2011.9534870839354 18.999933 2011-Dec-14 06:16:04 LOG4 log_alfabeam: ALFABEAM 0 10.220694444444446 20.286249999999988 2011-Dec-14 06:16:04 LOG4 log_alfabeam: ALFABEAM 1 10.228205785894147 20.296158494486050 2011-Dec-14 06:16:04 LOG4 log_alfabeam: ALFABEAM 2 10.223604288123006 20.369820831610387 2011-Dec-14 06:16:04 LOG4 log_alfabeam: ALFABEAM 3 10.216086290792244 20.360245141994479 2011-Dec-14 06:16:04 LOG4 log_alfabeam: ALFABEAM 4 10.213184286894025 20.276041987715256 2011-Dec-14 06:16:04 LOG4 log_alfabeam: ALFABEAM 5 10.217818742945857 20.202264306895529 2011-Dec-14 06:16:04 LOG4 log_alfabeam: ALFABEAM 6 10.225322134434279 20.212804744946787 2011-Dec-14 06:16:04 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134800029 2011-Dec-14 06:16:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-14 06:16:05 LOG5 begin_task: Level: (4) ID = <10325> Status = 0 0 0 0 ok 2011-Dec-14 06:16:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 06:16:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-14 06:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.587 (still bad) 2011-Dec-14 06:16:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:16:05 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:16:05 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:16:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2011-Dec-14 06:16:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36966.00 2011-Dec-14 06:16:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 06:16:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:16:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:16:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:16:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:16:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:16:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:16:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 06:16:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 06:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.573 (still bad) 2011-Dec-14 06:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.575 (still bad) 2011-Dec-14 06:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.579 (still bad) 2011-Dec-14 06:16:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-14 06:16:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.297 1.489 1.275 1.333 2011-Dec-14 06:16:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.280 1.457 1.498 1.269 2011-Dec-14 06:16:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.048 1.298 1.331 1.505 2011-Dec-14 06:16:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.574 0.023 1.369 0.023 2011-Dec-14 06:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.574 (still bad) 2011-Dec-14 06:16:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 06:16:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-14 06:16:16 LOG5 end_task: Level: (4) ID = <10325> Status = 0 0 0 0 ok 2011-Dec-14 06:16:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-14 06:16:16 LOG5 end_task: Level: (3) ID = <10324> Status = 0 0 0 0 ok 2011-Dec-14 06:16:16 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2011-Dec-14 06:16:16 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2011-Dec-14 06:16:16 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2011-Dec-14 06:16:16 LOG5 antvel: Calling 'antvel 101314.500000 201710.500000 J Topocentric 0' 2011-Dec-14 06:16:16 LOG2 antvel: Precessing RA = 10:13:14.5 Dec = +20:17:10.5 Epoch = 2011.95349 J 2011-Dec-14 06:16:16 LOG2 antvel: Computed apparent RA = 10:13:55.4 Dec = +20:13:23.3 2011-Dec-14 06:16:16 LOG2 antvel: Parameters to Doppler: Topocentric 36976 2011 348 0.0 2011-Dec-14 06:16:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-14 06:16:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2011-Dec-14 06:16:16 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2011-Dec-14 06:16:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-14 06:16:16 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-14 06:16:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-14 06:16:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:16:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2011-Dec-14 06:16:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-14 06:16:16 LOG5 begin_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2011-Dec-14 06:16:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2011-Dec-14 06:16:16 LOG5 log_alfabeam: Parameters: 10.220694444444444 20.286250000000003 11.336840 2011.9534874641924 18.999933 2011-Dec-14 06:16:16 LOG4 log_alfabeam: ALFABEAM 0 10.220694444444446 20.286250000000010 2011-Dec-14 06:16:16 LOG4 log_alfabeam: ALFABEAM 1 10.228205428240505 20.296212522095466 2011-Dec-14 06:16:16 LOG4 log_alfabeam: ALFABEAM 2 10.223601221245648 20.369842248808105 2011-Dec-14 06:16:16 LOG4 log_alfabeam: ALFABEAM 3 10.216083581859195 20.360211301427746 2011-Dec-14 06:16:16 LOG4 log_alfabeam: ALFABEAM 4 10.213184657230824 20.275988681643803 2011-Dec-14 06:16:16 LOG4 log_alfabeam: ALFABEAM 5 10.217821724646111 20.202244399905158 2011-Dec-14 06:16:16 LOG4 log_alfabeam: ALFABEAM 6 10.225324747027669 20.212836915490293 2011-Dec-14 06:16:16 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134800030 2011-Dec-14 06:16:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-14 06:16:17 LOG5 begin_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2011-Dec-14 06:16:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 06:16:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-14 06:16:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:16:17 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:16:17 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.575 (still bad) 2011-Dec-14 06:16:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2011-Dec-14 06:16:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36978.00 2011-Dec-14 06:16:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 06:16:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:16:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:16:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:16:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:16:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:16:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:16:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 06:16:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 06:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.542 (still bad) 2011-Dec-14 06:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.546 (still bad) 2011-Dec-14 06:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.552 (still bad) 2011-Dec-14 06:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.543 (still bad) 2011-Dec-14 06:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.544 (still bad) 2011-Dec-14 06:16:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 06:16:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-14 06:16:28 LOG5 end_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2011-Dec-14 06:16:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-14 06:16:28 LOG5 end_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2011-Dec-14 06:16:28 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2011-Dec-14 06:16:28 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2011-Dec-14 06:16:28 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2011-Dec-14 06:16:28 LOG5 antvel: Calling 'antvel 101314.500000 201710.500000 J Topocentric 0' 2011-Dec-14 06:16:28 LOG2 antvel: Precessing RA = 10:13:14.5 Dec = +20:17:10.5 Epoch = 2011.95349 J 2011-Dec-14 06:16:28 LOG2 antvel: Computed apparent RA = 10:13:55.4 Dec = +20:13:23.3 2011-Dec-14 06:16:28 LOG2 antvel: Parameters to Doppler: Topocentric 36988 2011 348 0.0 2011-Dec-14 06:16:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-14 06:16:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2011-Dec-14 06:16:28 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2011-Dec-14 06:16:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-14 06:16:28 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-14 06:16:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-14 06:16:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:16:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2011-Dec-14 06:16:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-14 06:16:28 LOG5 begin_task: Level: (3) ID = <10328> Status = 0 0 0 0 ok 2011-Dec-14 06:16:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2011-Dec-14 06:16:28 LOG5 log_alfabeam: Parameters: 10.220694444444444 20.286250000000003 11.340182 2011.9534878444495 18.999933 2011-Dec-14 06:16:28 LOG4 log_alfabeam: ALFABEAM 0 10.220694444444447 20.286250000000006 2011-Dec-14 06:16:28 LOG4 log_alfabeam: ALFABEAM 1 10.228205070230757 20.296266305825483 2011-Dec-14 06:16:28 LOG4 log_alfabeam: ALFABEAM 2 10.223598167320171 20.369863547428370 2011-Dec-14 06:16:28 LOG4 log_alfabeam: ALFABEAM 3 10.216080886306901 20.360177593611088 2011-Dec-14 06:16:28 LOG4 log_alfabeam: ALFABEAM 4 10.213185027816143 20.275935615182927 2011-Dec-14 06:16:28 LOG4 log_alfabeam: ALFABEAM 5 10.217824693827467 20.202224601446648 2011-Dec-14 06:16:28 LOG4 log_alfabeam: ALFABEAM 6 10.225327346917318 20.212868962400258 2011-Dec-14 06:16:28 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134800031 2011-Dec-14 06:16:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-14 06:16:29 LOG5 begin_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2011-Dec-14 06:16:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 06:16:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-14 06:16:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:16:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:16:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:16:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2011-Dec-14 06:16:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36990.00 2011-Dec-14 06:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.547 (still bad) 2011-Dec-14 06:16:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 06:16:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:16:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:16:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:16:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:16:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:16:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:16:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 06:16:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 06:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.538 (still bad) 2011-Dec-14 06:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.540 (still bad) 2011-Dec-14 06:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.544 (still bad) 2011-Dec-14 06:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.539 (still bad) 2011-Dec-14 06:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.540 (still bad) 2011-Dec-14 06:16:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 06:16:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-14 06:16:40 LOG5 end_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2011-Dec-14 06:16:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-14 06:16:40 LOG5 end_task: Level: (3) ID = <10328> Status = 0 0 0 0 ok 2011-Dec-14 06:16:40 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2011-Dec-14 06:16:40 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2011-Dec-14 06:16:40 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2011-Dec-14 06:16:40 LOG5 antvel: Calling 'antvel 101314.500000 201710.500000 J Topocentric 0' 2011-Dec-14 06:16:40 LOG2 antvel: Precessing RA = 10:13:14.5 Dec = +20:17:10.5 Epoch = 2011.95349 J 2011-Dec-14 06:16:40 LOG2 antvel: Computed apparent RA = 10:13:55.4 Dec = +20:13:23.3 2011-Dec-14 06:16:40 LOG2 antvel: Parameters to Doppler: Topocentric 37000 2011 348 0.0 2011-Dec-14 06:16:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-14 06:16:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2011-Dec-14 06:16:40 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2011-Dec-14 06:16:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-14 06:16:40 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-14 06:16:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-14 06:16:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:16:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2011-Dec-14 06:16:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-14 06:16:40 LOG5 begin_task: Level: (3) ID = <10330> Status = 0 0 0 0 ok 2011-Dec-14 06:16:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2011-Dec-14 06:16:40 LOG5 log_alfabeam: Parameters: 10.220694444444444 20.286250000000003 11.343525 2011.9534882247067 18.999933 2011-Dec-14 06:16:40 LOG4 log_alfabeam: ALFABEAM 0 10.220694444444447 20.286250000000013 2011-Dec-14 06:16:40 LOG4 log_alfabeam: ALFABEAM 1 10.228204711661698 20.296319879895009 2011-Dec-14 06:16:40 LOG4 log_alfabeam: ALFABEAM 2 10.223595124414992 20.369884741292910 2011-Dec-14 06:16:40 LOG4 log_alfabeam: ALFABEAM 3 10.216078202406003 20.360143997353834 2011-Dec-14 06:16:40 LOG4 log_alfabeam: ALFABEAM 4 10.213185398861938 20.275882754577811 2011-Dec-14 06:16:40 LOG4 log_alfabeam: ALFABEAM 5 10.217827652367902 20.202204898687427 2011-Dec-14 06:16:40 LOG4 log_alfabeam: ALFABEAM 6 10.225329935768929 20.212900905806329 2011-Dec-14 06:16:40 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134800032 2011-Dec-14 06:16:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-14 06:16:41 LOG5 begin_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2011-Dec-14 06:16:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 06:16:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-14 06:16:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:16:41 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:16:41 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:16:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2011-Dec-14 06:16:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37002.00 2011-Dec-14 06:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.541 (still bad) 2011-Dec-14 06:16:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 06:16:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:16:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:16:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:16:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:16:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:16:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:16:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 06:16:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 06:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.541 (still bad) 2011-Dec-14 06:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.542 (still bad) 2011-Dec-14 06:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.548 (still bad) 2011-Dec-14 06:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.543 (still bad) 2011-Dec-14 06:16:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 06:16:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-14 06:16:52 LOG5 end_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2011-Dec-14 06:16:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-14 06:16:52 LOG5 end_task: Level: (3) ID = <10330> Status = 0 0 0 0 ok 2011-Dec-14 06:16:52 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2011-Dec-14 06:16:52 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2011-Dec-14 06:16:52 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2011-Dec-14 06:16:52 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-14 06:16:52 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-14 06:16:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-14 06:16:52 LOG5 begin_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2011-Dec-14 06:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.541 (still bad) 2011-Dec-14 06:16:52 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-14 06:16:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-14 06:16:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-14 06:16:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-14 06:16:52 LOG5 end_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2011-Dec-14 06:16:52 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2011-Dec-14 06:16:52 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2011-Dec-14 06:16:52 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-14 06:16:52 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2011-Dec-14 06:16:52 LOG5 antvel: Calling 'antvel 101314.500000 201710.500000 J Topocentric 0' 2011-Dec-14 06:16:52 LOG2 antvel: Precessing RA = 10:13:14.5 Dec = +20:17:10.5 Epoch = 2011.95349 J 2011-Dec-14 06:16:52 LOG2 antvel: Computed apparent RA = 10:13:55.4 Dec = +20:13:23.3 2011-Dec-14 06:16:52 LOG2 antvel: Parameters to Doppler: Topocentric 37012 2011 348 0.0 2011-Dec-14 06:16:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-14 06:16:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2011-Dec-14 06:16:52 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2011-Dec-14 06:16:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-14 06:16:52 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-14 06:16:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-14 06:16:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:16:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2011-Dec-14 06:16:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-14 06:16:52 LOG5 begin_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2011-Dec-14 06:16:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-14 06:16:52 LOG5 log_alfabeam: Parameters: 10.220694444444444 20.286250000000003 11.346867 2011.9534886049637 18.999933 2011-Dec-14 06:16:52 LOG4 log_alfabeam: ALFABEAM 0 10.220694444444444 20.286250000000006 2011-Dec-14 06:16:52 LOG4 log_alfabeam: ALFABEAM 1 10.228204352758659 20.296373214260335 2011-Dec-14 06:16:52 LOG4 log_alfabeam: ALFABEAM 2 10.223592094247801 20.369905818783685 2011-Dec-14 06:16:52 LOG4 log_alfabeam: ALFABEAM 3 10.216075531647427 20.360110531748017 2011-Dec-14 06:16:52 LOG4 log_alfabeam: ALFABEAM 4 10.213185770136624 20.275830129479555 2011-Dec-14 06:16:52 LOG4 log_alfabeam: ALFABEAM 5 10.217830598597322 20.202185302443496 2011-Dec-14 06:16:52 LOG4 log_alfabeam: ALFABEAM 6 10.225332512142119 20.212932727538778 2011-Dec-14 06:16:52 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134800033 2011-Dec-14 06:16:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-14 06:16:53 LOG5 begin_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2011-Dec-14 06:16:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 06:16:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-14 06:16:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:16:53 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:16:53 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:16:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-14 06:16:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37014.00 2011-Dec-14 06:16:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 06:16:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:16:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:16:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:16:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:16:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:16:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:16:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 06:16:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 06:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.112 (still bad) 2011-Dec-14 06:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.113 (still bad) 2011-Dec-14 06:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2011-Dec-14 06:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.113 (still bad) 2011-Dec-14 06:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.113 (still bad) 2011-Dec-14 06:17:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 06:17:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-14 06:17:04 LOG5 end_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2011-Dec-14 06:17:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-14 06:17:04 LOG5 end_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2011-Dec-14 06:17:04 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2011-Dec-14 06:17:04 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-14 06:17:04 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2011-Dec-14 06:17:04 LOG5 antvel: Calling 'antvel 101314.500000 201710.500000 J Topocentric 0' 2011-Dec-14 06:17:04 LOG2 antvel: Precessing RA = 10:13:14.5 Dec = +20:17:10.5 Epoch = 2011.95349 J 2011-Dec-14 06:17:04 LOG2 antvel: Computed apparent RA = 10:13:55.4 Dec = +20:13:23.3 2011-Dec-14 06:17:04 LOG2 antvel: Parameters to Doppler: Topocentric 37024 2011 348 0.0 2011-Dec-14 06:17:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-14 06:17:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2011-Dec-14 06:17:04 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2011-Dec-14 06:17:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-14 06:17:04 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-14 06:17:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-14 06:17:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:17:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2011-Dec-14 06:17:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-14 06:17:04 LOG5 begin_task: Level: (3) ID = <10335> Status = 0 0 0 0 ok 2011-Dec-14 06:17:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-14 06:17:04 LOG5 log_alfabeam: Parameters: 10.220694444444444 20.286250000000003 11.350210 2011.9534889852207 18.999933 2011-Dec-14 06:17:04 LOG4 log_alfabeam: ALFABEAM 0 10.220694444444444 20.286249999999992 2011-Dec-14 06:17:04 LOG4 log_alfabeam: ALFABEAM 1 10.228203993317452 20.296426342824365 2011-Dec-14 06:17:04 LOG4 log_alfabeam: ALFABEAM 2 10.223589074903533 20.369926793562943 2011-Dec-14 06:17:04 LOG4 log_alfabeam: ALFABEAM 3 10.216072872319446 20.360077175769181 2011-Dec-14 06:17:04 LOG4 log_alfabeam: ALFABEAM 4 10.213186141852985 20.275777706443687 2011-Dec-14 06:17:04 LOG4 log_alfabeam: ALFABEAM 5 10.217833534377691 20.202165800028165 2011-Dec-14 06:17:04 LOG4 log_alfabeam: ALFABEAM 6 10.225335077685862 20.212964447572492 2011-Dec-14 06:17:04 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134800034 2011-Dec-14 06:17:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-14 06:17:05 LOG5 begin_task: Level: (4) ID = <10336> Status = 0 0 0 0 ok 2011-Dec-14 06:17:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 06:17:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-14 06:17:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:17:05 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:17:05 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:17:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-14 06:17:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37026.00 2011-Dec-14 06:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-14 06:17:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 06:17:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:17:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:17:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:17:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:17:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:17:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:17:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 06:17:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 06:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.147 (still bad) 2011-Dec-14 06:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.148 (still bad) 2011-Dec-14 06:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.157 (still bad) 2011-Dec-14 06:17:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-14 06:17:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.964 1.134 0.966 1.025 2011-Dec-14 06:17:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.943 1.082 1.127 0.958 2011-Dec-14 06:17:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.867 0.958 0.998 1.150 2011-Dec-14 06:17:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.148 0.023 1.000 0.023 2011-Dec-14 06:17:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 06:17:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-14 06:17:16 LOG5 end_task: Level: (4) ID = <10336> Status = 0 0 0 0 ok 2011-Dec-14 06:17:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-14 06:17:16 LOG5 end_task: Level: (3) ID = <10335> Status = 0 0 0 0 ok 2011-Dec-14 06:17:16 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2011-Dec-14 06:17:16 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-14 06:17:16 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2011-Dec-14 06:17:16 LOG5 antvel: Calling 'antvel 101314.500000 201710.500000 J Topocentric 0' 2011-Dec-14 06:17:16 LOG2 antvel: Precessing RA = 10:13:14.5 Dec = +20:17:10.5 Epoch = 2011.95349 J 2011-Dec-14 06:17:16 LOG2 antvel: Computed apparent RA = 10:13:55.4 Dec = +20:13:23.3 2011-Dec-14 06:17:16 LOG2 antvel: Parameters to Doppler: Topocentric 37036 2011 348 0.0 2011-Dec-14 06:17:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-14 06:17:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2011-Dec-14 06:17:16 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2011-Dec-14 06:17:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-14 06:17:16 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-14 06:17:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-14 06:17:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:17:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2011-Dec-14 06:17:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-14 06:17:16 LOG5 begin_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2011-Dec-14 06:17:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-14 06:17:16 LOG5 log_alfabeam: Parameters: 10.220694444444444 20.286250000000003 11.353552 2011.9534893654777 18.999933 2011-Dec-14 06:17:16 LOG4 log_alfabeam: ALFABEAM 0 10.220694444444447 20.286249999999999 2011-Dec-14 06:17:16 LOG4 log_alfabeam: ALFABEAM 1 10.228203633563465 20.296479235763716 2011-Dec-14 06:17:16 LOG4 log_alfabeam: ALFABEAM 2 10.223586068088052 20.369947654117020 2011-Dec-14 06:17:16 LOG4 log_alfabeam: ALFABEAM 3 10.216070225901056 20.360043948386664 2011-Dec-14 06:17:16 LOG4 log_alfabeam: ALFABEAM 4 10.213186513779451 20.275725514905140 2011-Dec-14 06:17:16 LOG4 log_alfabeam: ALFABEAM 5 10.217836458050328 20.202146402162150 2011-Dec-14 06:17:16 LOG4 log_alfabeam: ALFABEAM 6 10.225337630971122 20.212996047851767 2011-Dec-14 06:17:16 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134800035 2011-Dec-14 06:17:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-14 06:17:17 LOG5 begin_task: Level: (4) ID = <10338> Status = 0 0 0 0 ok 2011-Dec-14 06:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.149 (still bad) 2011-Dec-14 06:17:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 06:17:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-14 06:17:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:17:17 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:17:17 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:17:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-14 06:17:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37038.00 2011-Dec-14 06:17:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 06:17:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:17:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:17:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:17:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:17:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:17:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:17:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 06:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.153 (still bad) 2011-Dec-14 06:17:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 06:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.149 (still bad) 2011-Dec-14 06:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.151 (still bad) 2011-Dec-14 06:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.151 (still bad) 2011-Dec-14 06:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.149 (still bad) 2011-Dec-14 06:17:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 06:17:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-14 06:17:28 LOG5 end_task: Level: (4) ID = <10338> Status = 0 0 0 0 ok 2011-Dec-14 06:17:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-14 06:17:28 LOG5 end_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2011-Dec-14 06:17:28 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2011-Dec-14 06:17:28 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-14 06:17:28 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2011-Dec-14 06:17:28 LOG5 antvel: Calling 'antvel 101314.500000 201710.500000 J Topocentric 0' 2011-Dec-14 06:17:28 LOG2 antvel: Precessing RA = 10:13:14.5 Dec = +20:17:10.5 Epoch = 2011.95349 J 2011-Dec-14 06:17:28 LOG2 antvel: Computed apparent RA = 10:13:55.4 Dec = +20:13:23.3 2011-Dec-14 06:17:28 LOG2 antvel: Parameters to Doppler: Topocentric 37048 2011 348 0.0 2011-Dec-14 06:17:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-14 06:17:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2011-Dec-14 06:17:28 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2011-Dec-14 06:17:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-14 06:17:28 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-14 06:17:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-14 06:17:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:17:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2011-Dec-14 06:17:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-14 06:17:28 LOG5 begin_task: Level: (3) ID = <10339> Status = 0 0 0 0 ok 2011-Dec-14 06:17:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-14 06:17:28 LOG5 log_alfabeam: Parameters: 10.220694444444444 20.286250000000003 11.356894 2011.9534897457347 18.999933 2011-Dec-14 06:17:28 LOG4 log_alfabeam: ALFABEAM 0 10.220694444444447 20.286249999999999 2011-Dec-14 06:17:28 LOG4 log_alfabeam: ALFABEAM 1 10.228203273399391 20.296531910942232 2011-Dec-14 06:17:28 LOG4 log_alfabeam: ALFABEAM 2 10.223583072797050 20.369968407757998 2011-Dec-14 06:17:28 LOG4 log_alfabeam: ALFABEAM 3 10.216067591484316 20.360010838628948 2011-Dec-14 06:17:28 LOG4 log_alfabeam: ALFABEAM 4 10.213186886018191 20.275673537244803 2011-Dec-14 06:17:28 LOG4 log_alfabeam: ALFABEAM 5 10.217839370591664 20.202127102062015 2011-Dec-14 06:17:28 LOG4 log_alfabeam: ALFABEAM 6 10.225340172871581 20.213027538792943 2011-Dec-14 06:17:28 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134800036 2011-Dec-14 06:17:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-14 06:17:29 LOG5 begin_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2011-Dec-14 06:17:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 06:17:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-14 06:17:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:17:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:17:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.150 (still bad) 2011-Dec-14 06:17:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-14 06:17:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37050.00 2011-Dec-14 06:17:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 06:17:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:17:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:17:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:17:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:17:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:17:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:17:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 06:17:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 06:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.149 (still bad) 2011-Dec-14 06:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-14 06:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.147 (still bad) 2011-Dec-14 06:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2011-Dec-14 06:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2011-Dec-14 06:17:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 06:17:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-14 06:17:40 LOG5 end_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2011-Dec-14 06:17:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-14 06:17:40 LOG5 end_task: Level: (3) ID = <10339> Status = 0 0 0 0 ok 2011-Dec-14 06:17:40 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2011-Dec-14 06:17:40 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-14 06:17:40 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2011-Dec-14 06:17:40 LOG5 antvel: Calling 'antvel 101314.500000 201710.500000 J Topocentric 0' 2011-Dec-14 06:17:40 LOG2 antvel: Precessing RA = 10:13:14.5 Dec = +20:17:10.5 Epoch = 2011.95349 J 2011-Dec-14 06:17:40 LOG2 antvel: Computed apparent RA = 10:13:55.4 Dec = +20:13:23.3 2011-Dec-14 06:17:40 LOG2 antvel: Parameters to Doppler: Topocentric 37060 2011 348 0.0 2011-Dec-14 06:17:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-14 06:17:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2011-Dec-14 06:17:40 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2011-Dec-14 06:17:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-14 06:17:40 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-14 06:17:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-14 06:17:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:17:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2011-Dec-14 06:17:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-14 06:17:40 LOG5 begin_task: Level: (3) ID = <10341> Status = 0 0 0 0 ok 2011-Dec-14 06:17:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-14 06:17:40 LOG5 log_alfabeam: Parameters: 10.220694444444444 20.286250000000003 11.360237 2011.9534901259919 18.999933 2011-Dec-14 06:17:40 LOG4 log_alfabeam: ALFABEAM 0 10.220694444444446 20.286250000000006 2011-Dec-14 06:17:40 LOG4 log_alfabeam: ALFABEAM 1 10.228202912727179 20.296584385940779 2011-Dec-14 06:17:40 LOG4 log_alfabeam: ALFABEAM 2 10.223580088041123 20.369989061657083 2011-Dec-14 06:17:40 LOG4 log_alfabeam: ALFABEAM 3 10.216064968176996 20.359977835675465 2011-Dec-14 06:17:40 LOG4 log_alfabeam: ALFABEAM 4 10.213187258671944 20.275621756121613 2011-Dec-14 06:17:40 LOG4 log_alfabeam: ALFABEAM 5 10.217842272963747 20.202107893073112 2011-Dec-14 06:17:40 LOG4 log_alfabeam: ALFABEAM 6 10.225342704246073 20.213058930672023 2011-Dec-14 06:17:40 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134800037 2011-Dec-14 06:17:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-14 06:17:41 LOG5 begin_task: Level: (4) ID = <10342> Status = 0 0 0 0 ok 2011-Dec-14 06:17:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 06:17:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-14 06:17:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:17:41 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:17:41 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:17:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-14 06:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.140 (still bad) 2011-Dec-14 06:17:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37062.00 2011-Dec-14 06:17:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 06:17:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:17:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:17:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:17:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:17:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:17:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:17:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 06:17:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 06:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-14 06:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-14 06:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2011-Dec-14 06:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-14 06:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-14 06:17:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 06:17:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-14 06:17:52 LOG5 end_task: Level: (4) ID = <10342> Status = 0 0 0 0 ok 2011-Dec-14 06:17:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-14 06:17:52 LOG5 end_task: Level: (3) ID = <10341> Status = 0 0 0 0 ok 2011-Dec-14 06:17:52 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2011-Dec-14 06:17:52 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-14 06:17:52 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2011-Dec-14 06:17:52 LOG5 antvel: Calling 'antvel 101314.500000 201710.500000 J Topocentric 0' 2011-Dec-14 06:17:52 LOG2 antvel: Precessing RA = 10:13:14.5 Dec = +20:17:10.5 Epoch = 2011.95349 J 2011-Dec-14 06:17:52 LOG2 antvel: Computed apparent RA = 10:13:55.4 Dec = +20:13:23.3 2011-Dec-14 06:17:52 LOG2 antvel: Parameters to Doppler: Topocentric 37072 2011 348 0.0 2011-Dec-14 06:17:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-14 06:17:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2011-Dec-14 06:17:52 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2011-Dec-14 06:17:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-14 06:17:52 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-14 06:17:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-14 06:17:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:17:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2011-Dec-14 06:17:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-14 06:17:52 LOG5 begin_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2011-Dec-14 06:17:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-14 06:17:52 LOG5 log_alfabeam: Parameters: 10.220694444444444 20.286250000000003 11.363579 2011.953490506249 18.999933 2011-Dec-14 06:17:52 LOG4 log_alfabeam: ALFABEAM 0 10.220694444444444 20.286249999999999 2011-Dec-14 06:17:52 LOG4 log_alfabeam: ALFABEAM 1 10.228202551772334 20.296636631259972 2011-Dec-14 06:17:52 LOG4 log_alfabeam: ALFABEAM 2 10.223577115508725 20.370009604454108 2011-Dec-14 06:17:52 LOG4 log_alfabeam: ALFABEAM 3 10.216062357440519 20.359944958314859 2011-Dec-14 06:17:52 LOG4 log_alfabeam: ALFABEAM 4 10.213187631509161 20.275570200652339 2011-Dec-14 06:17:52 LOG4 log_alfabeam: ALFABEAM 5 10.217845163524645 20.202088785775910 2011-Dec-14 06:17:52 LOG4 log_alfabeam: ALFABEAM 6 10.225345223682218 20.213090205600999 2011-Dec-14 06:17:52 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134800038 2011-Dec-14 06:17:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-14 06:17:53 LOG5 begin_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2011-Dec-14 06:17:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 06:17:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-14 06:17:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:17:53 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:17:53 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-14 06:17:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-14 06:17:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37074.00 2011-Dec-14 06:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2011-Dec-14 06:17:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-14 06:17:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:17:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:17:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:17:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2011-Dec-14 06:17:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:17:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2011-Dec-14 06:17:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2011-Dec-14 06:17:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2011-Dec-14 06:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.112 (still bad) 2011-Dec-14 06:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.114 (still bad) 2011-Dec-14 06:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2011-Dec-14 06:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.113 (still bad) 2011-Dec-14 06:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2011-Dec-14 06:18:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-14 06:18:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-14 06:18:04 LOG5 end_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2011-Dec-14 06:18:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-14 06:18:04 LOG5 end_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2011-Dec-14 06:18:04 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2011-Dec-14 06:18:04 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-14 06:18:04 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2011-Dec-14 06:18:04 LOG5 antvel: Calling 'antvel 101314.500000 201710.500000 J Topocentric 0' 2011-Dec-14 06:18:04 LOG2 antvel: Precessing RA = 10:13:14.5 Dec = +20:17:10.5 Epoch = 2011.95349 J 2011-Dec-14 06:18:04 LOG2 antvel: Computed apparent RA = 10:13:55.4 Dec = +20:13:23.3 2011-Dec-14 06:18:04 LOG2 antvel: Parameters to Doppler: Topocentric 37084 2011 348 0.0 2011-Dec-14 06:18:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-14 06:18:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2011-Dec-14 06:18:04 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2011-Dec-14 06:18:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-14 06:18:04 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-14 06:18:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-14 06:18:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-14 06:18:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2011-Dec-14 06:18:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-14 06:18:04 LOG5 begin_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2011-Dec-14 06:18:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-14 06:18:04 LOG5 log_alfabeam: Parameters: 10.220694444444444 20.286250000000003 11.366922 2011.953490886506 18.999933 2011-Dec-14 06:18:04 LOG4 log_alfabeam: ALFABEAM 0 10.220694444444446 20.286250000000006 2011-Dec-14 06:18:04 LOG4 log_alfabeam: ALFABEAM 1 10.228202190328346 20.296688680039168 2011-Dec-14 06:18:04 LOG4 log_alfabeam: ALFABEAM 2 10.223574153324773 20.370030049427083 2011-Dec-14 06:18:04 LOG4 log_alfabeam: ALFABEAM 3 10.216059757605764 20.359912185925563 2011-Dec-14 06:18:04 LOG4 log_alfabeam: ALFABEAM 4 10.213188004744584 20.275518838142517 2011-Dec-14 06:18:04 LOG4 log_alfabeam: ALFABEAM 5 10.217848044097659 20.202069767835180 2011-Dec-14 06:18:04 LOG4 log_alfabeam: ALFABEAM 6 10.225347732788652 20.213121383179800 2011-Dec-14 06:18:04 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134800039 2011-Dec-14 06:18:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-14 06:18:05 LOG5 begin_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2011-Dec-14 06:18:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-14 06:18:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-14 06:18:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}