2011-Dec-13 03:34:32 BEGIN executive: CIMA executive starting ... 2011-Dec-13 03:34:33 NOTE executive: STARTING NEW CIMA SESSION 2011-Dec-13 03:34:33 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2011-Dec-13 03:34:33 INFO4 executive: This is an ON-LINE session 2011-Dec-13 03:34:33 INFO4 executive: This is a LOCAL session 2011-Dec-13 03:34:33 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2011-Dec-13 03:34:33 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'ep' 2011-Dec-13 03:34:33 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20111213' 2011-Dec-13 03:34:33 LOG2 log_preferences: Currently applied preferences: 2011-Dec-13 03:34:33 LOG2 log_preferences: prefs(dailylog) = daily 2011-Dec-13 03:34:33 LOG2 log_preferences: prefs(offlinelog) = skip 2011-Dec-13 03:34:33 LOG2 log_preferences: prefs(datawindow) = ignore 2011-Dec-13 03:34:33 LOG2 log_preferences: prefs(limitwarning) = enabled 2011-Dec-13 03:34:33 LOG2 log_preferences: prefs(wappfailure) = abort 2011-Dec-13 03:34:33 LOG2 log_preferences: prefs(helpstyle) = stay-open 2011-Dec-13 03:34:33 LOG2 log_preferences: prefs(logcolours) = full 2011-Dec-13 03:34:33 LOG2 log_preferences: prefs(displaylevel) = INFO3 2011-Dec-13 03:34:33 LOG2 log_preferences: prefs(loglevel) = LOG5 2011-Dec-13 03:34:33 LOG2 log_preferences: prefs(displayformat) = short 2011-Dec-13 03:34:33 LOG2 log_preferences: prefs(logformat) = new 2011-Dec-13 03:34:33 LOG2 log_preferences: prefs(fontsize) = 4 2011-Dec-13 03:34:33 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2011-Dec-13 03:34:33 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2011-Dec-13 03:34:33 ALERT executive: CIMA executive ready 2011-Dec-13 03:34:34 NOTE frontend: CIMA frontend ready 2011-Dec-13 03:34:35 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:34:35 LOG4 got_cormsg: From DATATAKING: setup 2011-Dec-13 03:34:36 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2011-Dec-13 03:34:36 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2011-Dec-13 03:34:36 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2011-Dec-13 03:34:36 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2011-Dec-13 03:34:36 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Dec-13 03:34:36 NOTE select_receiver: Starting to select receiver ALFA 2011-Dec-13 03:34:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2011-Dec-13 03:34:37 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2011-Dec-13 03:34:37 LOG3 vw_send: To DATATAKING: acvlbical off 2011-Dec-13 03:34:37 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2011-Dec-13 03:34:37 STOP finish_task: Finishing task 'selecting receiver ALFA' 2011-Dec-13 03:34:37 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Dec-13 03:34:37 DONE finish_task: DONE finished selecting: receiver ALFA 2011-Dec-13 03:34:37 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-13 03:34:37 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2011-Dec-13 03:34:37 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Dec-13 03:34:40 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2011-Dec-13 03:34:40 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2011-Dec-13 03:34:40 LOG4 got_cormsg: From DATATAKING: vw% io 2011-Dec-13 03:34:40 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2011-Dec-13 03:34:40 LOG4 got_cormsg: From DATATAKING: 2011-Dec-13 03:34:40 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2011-Dec-13 03:34:40 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2011-Dec-13 03:34:40 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2011-Dec-13 03:34:40 LOG4 got_cormsg: From DATATAKING: vw% connectall 2011-Dec-13 03:34:40 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2011-Dec-13 03:34:40 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2011-Dec-13 03:34:40 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2011-Dec-13 03:34:40 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2011-Dec-13 03:34:40 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2011-Dec-13 03:34:40 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2011-Dec-13 03:34:40 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2011-Dec-13 03:34:40 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2011-Dec-13 03:34:40 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2011-Dec-13 03:34:40 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2011-Dec-13 03:34:40 LOG4 got_cormsg: From DATATAKING: acvlbical off 2011-Dec-13 03:34:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:34:40 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:34:47 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:34:47 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:35:41 INFO5 CIMA-read_in_command_file: Included command file 'command_galfacurpos_cima31.cmd' (at lines 49 - 65) 2011-Dec-13 03:35:41 INFO4 CIMA-load_command_file: Loaded command file '111213am.cmd' 2011-Dec-13 03:35:42 INFO1 CIMA-run_command_file: Transferring command file '111213am.cmd' to executive ... 2011-Dec-13 03:35:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD ages_mock.conf} 2011-Dec-13 03:35:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2011-Dec-13 03:35:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {CATALOG AGESFull.cat} 2011-Dec-13 03:35:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 9 {IF LSTSLEW(AGES3193_p3_107) < 085641 THEN} 2011-Dec-13 03:35:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 10 {FIXEDDRIFT az=255.77 alfaangle=-59.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_107 ra=95300.00 dec=211400.00} 2011-Dec-13 03:35:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {ENDIF} 2011-Dec-13 03:35:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 16 {IF LSTSLEW(AGES3193_p3_109) < 091941 THEN} 2011-Dec-13 03:35:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 17 {FIXEDDRIFT az=249.50 alfaangle=-50.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_109 ra=95300.00 dec=211100.00} 2011-Dec-13 03:35:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 20 {ENDIF} 2011-Dec-13 03:35:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 23 {IF LSTSLEW(AGES3193_p3_119) < 094241 THEN} 2011-Dec-13 03:35:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 24 {FIXEDDRIFT az=225.34 alfaangle=-22.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_119 ra=95300.00 dec=205600.00} 2011-Dec-13 03:35:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 27 {ENDIF} 2011-Dec-13 03:35:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 30 {IF LSTSLEW(AGES3193_p3_129) < 100840 THEN} 2011-Dec-13 03:35:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 31 {FIXEDDRIFT az=123.31 alfaangle=73.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_129 ra=95300.00 dec=204100.00} 2011-Dec-13 03:35:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 34 {ENDIF} 2011-Dec-13 03:35:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 37 {IF LSTSLEW(AGES3193_p3_131) < 103140 THEN} 2011-Dec-13 03:35:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 38 {FIXEDDRIFT az=105.47 alfaangle=-85.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_131 ra=95300.00 dec=203800.00} 2011-Dec-13 03:35:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 41 {ENDIF} 2011-Dec-13 03:35:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 44 {IF LSTSLEW(AGES3193_p3_133) < 105440 THEN} 2011-Dec-13 03:35:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 45 {FIXEDDRIFT az=101.08 alfaangle=-77.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_133 ra=95300.00 dec=203500.00} 2011-Dec-13 03:35:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 48 {ENDIF} 2011-Dec-13 03:35:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 55 {LOAD togs_cima31.conf} 2011-Dec-13 03:35:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 56 {TRACKCURPOS} 2011-Dec-13 03:35:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 57 {ALFAANGLE 19} 2011-Dec-13 03:35:43 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 61 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2011-Dec-13 03:35:43 COMMAND CIMA-send_to_exec: Sending command to run command file 2011-Dec-13 03:35:43 LOG4 exec_msg: From OBSERVER: run_command_file 111213am.cmd 1 1 25 2011-Dec-13 03:35:43 LOG4 run_command_file: Calling 'run_command_file 111213am.cmd 1 1 25' 2011-Dec-13 03:35:43 BEGIN begin_task: Starting task 'running command file '111213am.cmd'' 2011-Dec-13 03:35:43 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2011-Dec-13 03:35:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '111213am.cmd' ...} 2011-Dec-13 03:35:43 NOTE run_command_file: Starting execution of command file '111213am.cmd' from line 1 2011-Dec-13 03:35:43 COMMAND run_command_line: EXECUTING command 4: 'LOAD ages_mock.conf' 2011-Dec-13 03:35:43 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2011-Dec-13 03:35:43 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-13 03:35:43 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2011-Dec-13 03:35:43 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock.conf' 2011-Dec-13 03:35:43 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2011-Dec-13 03:35:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled1) "1" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled2) "0" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards1) "both" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards2) "both" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode1) "spectra" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode2) "spectra" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg1) "2-pol" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg2) "2-pol" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits1) "32" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits2) "32" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor1) "1" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor2) "1" 2011-Dec-13 03:35:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset1) "0.0" 2011-Dec-13 03:35:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset2) "0.0" 2011-Dec-13 03:35:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags1) "8192" 2011-Dec-13 03:35:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags2) "8192" 2011-Dec-13 03:35:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs1) "1000.0" 2011-Dec-13 03:35:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs2) "1000.0" 2011-Dec-13 03:35:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad1) "1" 2011-Dec-13 03:35:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad2) "0" 2011-Dec-13 03:35:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors1) "13" 2011-Dec-13 03:35:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors2) "0" 2011-Dec-13 03:35:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors1) "0" 2011-Dec-13 03:35:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors2) "0" 2011-Dec-13 03:35:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors1) "0" 2011-Dec-13 03:35:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors2) "0" 2011-Dec-13 03:35:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors1) "0" 2011-Dec-13 03:35:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors2) "0" 2011-Dec-13 03:35:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype1) "fits" 2011-Dec-13 03:35:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype2) "fits" 2011-Dec-13 03:35:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2011-Dec-13 03:35:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2011-Dec-13 03:35:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2011-Dec-13 03:35:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2011-Dec-13 03:35:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2011-Dec-13 03:35:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2011-Dec-13 03:35:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2011-Dec-13 03:35:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2011-Dec-13 03:35:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2011-Dec-13 03:35:46 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-13 03:35:46 BEGIN begin_task: Starting task 'configuring IF/LO path' 2011-Dec-13 03:35:46 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Dec-13 03:35:46 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2011-Dec-13 03:35:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2011-Dec-13 03:35:46 INFO1 config_iflo: Selecting receiver ALFA 2011-Dec-13 03:35:46 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2011-Dec-13 03:35:46 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2011-Dec-13 03:35:46 START begin_task: Starting task 'selecting receiver ALFA' 2011-Dec-13 03:35:46 LOG5 begin_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Dec-13 03:35:46 NOTE select_receiver: Starting to select receiver ALFA 2011-Dec-13 03:35:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2011-Dec-13 03:35:46 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2011-Dec-13 03:35:46 LOG3 vw_send: To DATATAKING: acvlbical off 2011-Dec-13 03:35:46 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2011-Dec-13 03:35:46 STOP finish_task: Finishing task 'selecting receiver ALFA' 2011-Dec-13 03:35:46 LOG5 finish_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Dec-13 03:35:46 INFO2 finish_task: DONE finished selecting: receiver ALFA 2011-Dec-13 03:35:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 03:35:46 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2011-Dec-13 03:35:46 LOG5 end_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Dec-13 03:35:46 START begin_task: Starting task 'waiting for receiver ALFA' 2011-Dec-13 03:35:46 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2011-Dec-13 03:35:46 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2011-Dec-13 03:35:46 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2011-Dec-13 03:35:46 INFO1 config_iflo: Configuring rest of the IF/LO path 2011-Dec-13 03:35:46 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2011-Dec-13 03:35:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-13 03:35:46 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-13 03:35:46 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-13 03:35:46 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2011-Dec-13 03:35:47 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-13 03:35:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-13 03:35:47 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2011-Dec-13 03:35:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-13 03:35:47 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-13 03:35:47 LOG3 vw_send: To DATATAKING: alfafb 1 2011-Dec-13 03:35:47 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2011-Dec-13 03:35:47 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2011-Dec-13 03:35:47 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2011-Dec-13 03:35:47 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2011-Dec-13 03:35:47 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2011-Dec-13 03:35:47 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2011-Dec-13 03:35:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2011-Dec-13 03:35:47 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2011-Dec-13 03:35:47 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2011-Dec-13 03:35:47 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2011-Dec-13 03:35:47 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2011-Dec-13 03:35:47 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2011-Dec-13 03:35:47 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2011-Dec-13 03:35:47 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2011-Dec-13 03:35:47 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2011-Dec-13 03:35:47 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2011-Dec-13 03:35:47 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2011-Dec-13 03:35:47 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2011-Dec-13 03:35:47 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2011-Dec-13 03:35:47 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2011-Dec-13 03:35:47 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2011-Dec-13 03:35:47 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2011-Dec-13 03:35:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 03:35:47 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2011-Dec-13 03:35:47 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2011-Dec-13 03:35:47 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2011-Dec-13 03:35:47 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2011-Dec-13 03:35:47 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2011-Dec-13 03:35:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2011-Dec-13 03:35:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 03:35:47 START begin_task: Starting task 'waiting on configuring IF/LO path' 2011-Dec-13 03:35:47 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2011-Dec-13 03:35:47 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2011-Dec-13 03:35:47 LOG4 got_cormsg: From DATATAKING: acvlbical off 2011-Dec-13 03:35:47 LOG4 got_cormsg: From DATATAKING: alfafb 1 2011-Dec-13 03:35:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2011-Dec-13 03:35:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2011-Dec-13 03:35:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2011-Dec-13 03:35:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2011-Dec-13 03:35:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2011-Dec-13 03:35:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2011-Dec-13 03:35:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2011-Dec-13 03:35:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2011-Dec-13 03:35:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2011-Dec-13 03:35:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2011-Dec-13 03:35:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2011-Dec-13 03:35:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2011-Dec-13 03:35:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2011-Dec-13 03:35:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2011-Dec-13 03:35:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 03:35:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2011-Dec-13 03:35:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2011-Dec-13 03:35:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2011-Dec-13 03:35:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2011-Dec-13 03:35:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 03:35:53 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:35:53 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:35:54 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:35:54 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:35:54 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:35:55 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:35:59 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:35:59 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:36:00 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:36:00 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:36:00 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:36:00 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:36:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:36:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:36:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:36:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:36:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:36:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:36:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:36:02 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:36:02 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:36:02 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:36:02 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-13 03:36:02 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2011-Dec-13 03:36:02 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2011-Dec-13 03:36:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2011-Dec-13 03:36:02 STOP finish_task: Finishing task 'configuring IF/LO path' 2011-Dec-13 03:36:02 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Dec-13 03:36:02 DONE finish_task: DONE finished configuration: IF/LO path 2011-Dec-13 03:36:02 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-13 03:36:02 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2011-Dec-13 03:36:02 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Dec-13 03:36:02 BEGIN begin_task: Starting task 'configuring WAPPs' 2011-Dec-13 03:36:02 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2011-Dec-13 03:36:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2011-Dec-13 03:36:02 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2011-Dec-13 03:36:02 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Dec-13 03:36:02 START begin_task: Starting task 'selecting calibration port' 2011-Dec-13 03:36:02 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2011-Dec-13 03:36:02 LOG3 vw_send: To DATATAKING: calport 3 2011-Dec-13 03:36:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Dec-13 03:36:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 03:36:02 START begin_task: Starting task 'waiting on calport' 2011-Dec-13 03:36:02 LOG5 begin_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2011-Dec-13 03:36:02 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:36:02 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Dec-13 03:36:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 03:36:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:36:03 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-13 03:36:03 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Dec-13 03:36:03 LOG5 end_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2011-Dec-13 03:36:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Dec-13 03:36:03 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Dec-13 03:36:03 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2011-Dec-13 03:36:03 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-13 03:36:03 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-13 03:36:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-13 03:36:03 LOG5 begin_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2011-Dec-13 03:36:03 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-13 03:36:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:36:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-13 03:36:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-13 03:36:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-13 03:36:03 LOG5 end_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2011-Dec-13 03:36:03 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2011-Dec-13 03:36:03 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2011-Dec-13 03:36:03 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2011-Dec-13 03:36:03 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2011-Dec-13 03:36:03 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2011-Dec-13 03:36:03 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2011-Dec-13 03:36:03 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2011-Dec-13 03:36:03 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2011-Dec-13 03:36:03 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ep 2011-Dec-13 03:36:03 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ep 2011-Dec-13 03:36:03 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ep 2011-Dec-13 03:36:03 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ep 2011-Dec-13 03:36:03 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Dec-13 03:36:03 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Dec-13 03:36:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-13 03:36:03 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2011-Dec-13 03:36:03 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-13 03:36:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-13 03:36:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-13 03:36:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-13 03:36:03 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2011-Dec-13 03:36:03 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ep 2011-Dec-13 03:36:03 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ep 2011-Dec-13 03:36:03 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ep 2011-Dec-13 03:36:03 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ep 2011-Dec-13 03:36:03 STOP finish_task: Finishing task 'configuring WAPPs' 2011-Dec-13 03:36:03 LOG5 finish_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2011-Dec-13 03:36:03 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2011-Dec-13 03:36:03 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-13 03:36:03 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2011-Dec-13 03:36:03 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2011-Dec-13 03:36:03 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2011-Dec-13 03:36:03 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2011-Dec-13 03:36:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2011-Dec-13 03:36:04 INFO1 config_mock: Starting to configure the Mock spectrometer 2011-Dec-13 03:36:04 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Dec-13 03:36:04 START begin_task: Starting task 'selecting calibration port' 2011-Dec-13 03:36:04 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2011-Dec-13 03:36:04 LOG3 vw_send: To DATATAKING: calport 3 2011-Dec-13 03:36:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Dec-13 03:36:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 03:36:04 START begin_task: Starting task 'waiting on calport' 2011-Dec-13 03:36:04 LOG5 begin_task: Level: (4) ID = <10015> Status = 0 0 0 0 ok 2011-Dec-13 03:36:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ep' 2011-Dec-13 03:36:04 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Dec-13 03:36:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2011-Dec-13 03:36:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2011-Dec-13 03:36:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 03:36:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:36:04 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-13 03:36:04 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Dec-13 03:36:04 LOG5 end_task: Level: (4) ID = <10015> Status = 0 0 0 0 ok 2011-Dec-13 03:36:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Dec-13 03:36:04 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Dec-13 03:36:04 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2011-Dec-13 03:36:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-13 03:36:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-13 03:36:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-13 03:36:04 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2011-Dec-13 03:36:04 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-13 03:36:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:36:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ep' 2011-Dec-13 03:36:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-13 03:36:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-13 03:36:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-13 03:36:04 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2011-Dec-13 03:36:04 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Dec-13 03:36:04 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Dec-13 03:36:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-13 03:36:04 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2011-Dec-13 03:36:04 NOTE WAPPDATA-new_file: New FITS file: wapp.20111213.a2048.0000.fits 2011-Dec-13 03:36:04 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-13 03:36:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-13 03:36:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-13 03:36:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-13 03:36:04 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2011-Dec-13 03:36:04 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2011-Dec-13 03:36:04 LOG3 socket_wait: To MOCK: NOP 2011-Dec-13 03:36:04 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2011-Dec-13 03:36:04 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2011-Dec-13 03:36:04 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20111213.a2048.0000.fits} 2011-Dec-13 03:36:05 ALERT got_mock_message: Mock spectrometer restarting 2011-Dec-13 03:36:05 LOG4 from_mock: From MOCK: nop ok 2011-Dec-13 03:36:05 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2011-Dec-13 03:36:05 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2011-Dec-13 03:36:05 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2011-Dec-13 03:36:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2011-Dec-13 03:36:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): datatype=AB 2011-Dec-13 03:36:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bits=32 2011-Dec-13 03:36:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bwmhz=172.032 2011-Dec-13 03:36:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevif1hz=250000000 2011-Dec-13 03:36:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): digfreqoffhz=0.0 2011-Dec-13 03:36:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fftlen=8192 2011-Dec-13 03:36:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): dumptmsec=1.0 2011-Dec-13 03:36:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): blankatod=1 2011-Dec-13 03:36:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskadc=13 2011-Dec-13 03:36:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskpfb=0 2011-Dec-13 03:36:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskacc=0 2011-Dec-13 03:36:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskash=0 2011-Dec-13 03:36:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): adcclkhz=172032000 2011-Dec-13 03:36:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevlohz=175000000 325000000 2011-Dec-13 03:36:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fileprefix=a2048 2011-Dec-13 03:36:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): maxfilesizemb=2048 2011-Dec-13 03:36:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): calctl=c0 2011-Dec-13 03:36:05 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group 1' using string 'conf' 2011-Dec-13 03:36:05 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bits=32:bwmhz=172.032:pdevif1hz=250000000:digfreqoffhz=0.0:fftlen=8192:dumptmsec=1.0:blankatod=1:emaskadc=13:emaskpfb=0:emaskacc=0:emaskash=0:adcclkhz=172032000:pdevlohz=175000000 325000000:fileprefix=a2048:maxfilesizemb=2048:calctl=c0 2011-Dec-13 03:36:05 START begin_task: Starting task 'waiting on configure Mock spectrometer group 1' 2011-Dec-13 03:36:05 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2011-Dec-13 03:36:05 LOG4 from_mock: From MOCK: confok 2011-Dec-13 03:36:05 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group 1' with status 'OK' 2011-Dec-13 03:36:05 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2011-Dec-13 03:36:05 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group 1' 2011-Dec-13 03:36:05 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group 2' using string 'conf' 2011-Dec-13 03:36:05 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2011-Dec-13 03:36:05 START begin_task: Starting task 'waiting on disable Mock spectrometer group 2' 2011-Dec-13 03:36:05 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2011-Dec-13 03:36:05 LOG4 from_mock: From MOCK: confok 2011-Dec-13 03:36:05 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group 2' with status 'OK' 2011-Dec-13 03:36:05 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2011-Dec-13 03:36:05 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group 2' 2011-Dec-13 03:36:05 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2011-Dec-13 03:36:05 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2011-Dec-13 03:36:05 DONE finish_task: DONE finished configuring: the Mock spectrometer 2011-Dec-13 03:36:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-13 03:36:06 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2011-Dec-13 03:36:06 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2011-Dec-13 03:36:06 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2011-Dec-13 03:36:06 COMMAND run_command_line: EXECUTING command 5: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2011-Dec-13 03:36:06 COMMAND run_command_line: EXECUTING command 6: 'CATALOG AGESFull.cat' 2011-Dec-13 03:36:06 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2011-Dec-13 03:36:06 COMMAND run_command_line: EXECUTING command 9: 'IF LSTSLEW(AGES3193_p3_107) < 085641 THEN' 2011-Dec-13 03:36:06 LOG3 is_if_valid: Current source data: up 258.0 18.6 UP - - 160 5.6 2011-Dec-13 03:36:06 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_107) < 085641 2011-Dec-13 03:36:06 INFO5 is_if_valid: Condition parsed as: 8.6874313333333344 < 8.9447222222222216 2011-Dec-13 03:36:06 COMMAND run_command_line: EXECUTING command 10: 'FIXEDDRIFT az=255.77 alfaangle=-59.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_107 ra=95300.00 dec=211400.00' 2011-Dec-13 03:36:06 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-13 03:36:07 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-13 03:36:07 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 255.77 -59.9 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_107 95300.00 211400.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-13 03:36:07 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-13 03:36:07 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2011-Dec-13 03:36:07 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AUDSGAL2577' 2011-Dec-13 03:36:07 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-13 03:36:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_107} 2011-Dec-13 03:36:07 INFO3 fixed_driftmap: Sending telescope to Az = 255.77 and ZA = 13.70 2011-Dec-13 03:36:07 LOG3 track_source: Calling 'track_source AGES3193_p3_107 255.77 13.7018916866 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-13 03:36:07 START begin_task: Starting task 'sending tracking commands' 2011-Dec-13 03:36:07 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2011-Dec-13 03:36:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_107} INFO {Slewing to source 'AGES3193_p3_107' ...} 2011-Dec-13 03:36:07 INFO1 track_source: Starting to track AGES3193_p3_107 2011-Dec-13 03:36:07 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_107" 2011-Dec-13 03:36:07 LOG3 vw_send: To DATATAKING: set ra 255.77 2011-Dec-13 03:36:07 LOG3 vw_send: To DATATAKING: set dec 13.7018916866 2011-Dec-13 03:36:07 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-13 03:36:07 LOG3 vw_send: To DATATAKING: pnt tr 255.77 13.7018916866 -CF 2011-Dec-13 03:36:07 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 03:36:07 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-13 03:36:07 LOG5 finish_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2011-Dec-13 03:36:07 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-13 03:36:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 03:36:07 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-13 03:36:07 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2011-Dec-13 03:36:07 START begin_task: Starting task 'rotate ALFA to -59.9 degrees' 2011-Dec-13 03:36:07 LOG5 begin_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2011-Dec-13 03:36:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -59.9 degrees ...} 2011-Dec-13 03:36:07 INFO2 rotate_alfa: ALFA commanded to -59.9 degrees 2011-Dec-13 03:36:07 LOG3 sock_errsend: To ALFAMOTOR: POSITION -59.9 REPLY 2011-Dec-13 03:36:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-13 03:36:07 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-13 03:36:07 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2011-Dec-13 03:36:07 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_107" 2011-Dec-13 03:36:07 LOG4 got_cormsg: From DATATAKING: set ra 255.77 2011-Dec-13 03:36:07 LOG4 got_cormsg: From DATATAKING: set dec 13.7018916866 2011-Dec-13 03:36:07 LOG4 got_cormsg: From DATATAKING: vw% 255.77 2011-Dec-13 03:36:07 LOG4 got_cormsg: From DATATAKING: vw% 13.7018916866 2011-Dec-13 03:36:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:36:07 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-13 03:36:07 LOG4 got_cormsg: From DATATAKING: pnt tr 255.77 13.7018916866 -CF 2011-Dec-13 03:36:07 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 03:36:07 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-13 03:36:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:37:10 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-13 03:37:10 INFO3 alfa_motor: ALFA rotator in-position -59.90 degrees 2011-Dec-13 03:37:10 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-13 03:37:10 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2011-Dec-13 03:37:10 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-13 03:37:10 STOP finish_task: Finishing task 'rotate ALFA to -59.9 degrees' 2011-Dec-13 03:37:10 LOG5 finish_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2011-Dec-13 03:37:10 INFO2 finish_task: DONE finished configuration: rotating ALFA to -59.9 degrees 2011-Dec-13 03:37:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 03:37:10 STOP end_task: Finishing task 'rotate ALFA to -59.9 degrees' with status 'OK' 2011-Dec-13 03:37:10 LOG5 end_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2011-Dec-13 03:37:10 START begin_task: Starting task 'waiting on telescope' 2011-Dec-13 03:37:10 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2011-Dec-13 03:37:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-13 03:37:11 LOG3 waittrk: Start waittrk 5 2011-Dec-13 03:37:11 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-13 03:37:11 LOG5 begin_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2011-Dec-13 03:37:16 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-13 03:37:16 LOG5 end_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2011-Dec-13 03:37:16 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-13 03:37:16 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2011-Dec-13 03:40:55 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-13 03:40:55 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2011-Dec-13 03:40:55 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-13 03:40:55 INFO2 waittrk: Now tracking AGES3193_p3_107 2011-Dec-13 03:40:55 LOG4 waittrk: Current telescope position: Az = 255.32 ZA = 13.71 2011-Dec-13 03:40:55 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-13 03:40:55 LOG5 finish_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2011-Dec-13 03:40:55 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-13 03:40:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 03:40:55 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-13 03:40:55 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2011-Dec-13 03:40:55 START begin_task: Starting task 'selecting calibration type' 2011-Dec-13 03:40:55 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2011-Dec-13 03:40:55 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-13 03:40:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-13 03:40:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 03:40:55 START begin_task: Starting task 'waiting on setcal' 2011-Dec-13 03:40:55 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2011-Dec-13 03:40:55 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-13 03:40:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 03:40:55 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:40:55 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-13 03:40:55 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-13 03:40:55 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2011-Dec-13 03:40:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-13 03:40:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-13 03:40:55 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-13 03:40:55 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-13 03:40:55 LOG5 begin_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2011-Dec-13 03:40:55 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:40:55 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-13 03:40:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-13 03:40:55 LOG5 end_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2011-Dec-13 03:40:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-13 03:40:55 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-13 03:40:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-13 03:40:55 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-13 03:40:55 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-13 03:40:55 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2011-Dec-13 03:40:55 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-13 03:40:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-13 03:40:55 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2011-Dec-13 03:40:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-13 03:40:55 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-13 03:40:55 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-13 03:40:55 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2011-Dec-13 03:40:55 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Dec-13 03:40:55 INFO2 astwait: Waiting for 908 seconds from 07:40:55 to 07:56:03 UTC ... 2011-Dec-13 03:40:55 LOG4 send_obs_status: To obs_status: <1> TASKTIME 908 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-13 03:40:56 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Dec-13 03:40:56 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2011-Dec-13 03:56:03 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Dec-13 03:56:03 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2011-Dec-13 03:56:03 INFO3 astwait: Finished waiting 2011-Dec-13 03:56:03 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-13 03:56:03 LOG5 dopset_later: Calling 'dopset_later 61.437341927043946' 2011-Dec-13 03:56:03 INFO3 dopset_later: Setting Doppler correction for 03:57:03 (61.4 seconds from now) 2011-Dec-13 03:56:03 LOG5 antvel: Calling 'antvel 255.770000 13.701892 F Heliocentric 61.437341927043946' 2011-Dec-13 03:56:03 LOG2 antvel: Transforming current Az = 255.77 ZA = 13.70 to apparent RA = 09:53:41.5 Dec = +21:10:23.2 2011-Dec-13 03:56:03 LOG2 antvel: Parameters to Doppler: Heliocentric 28623 2011 347 0.0 2011-Dec-13 03:56:03 INFO5 antvel: Computed antenna velocity: -26.55534 km/s 2011-Dec-13 03:56:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-26.555336061799999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-13 03:56:03 INFO4 dopset_gen: New sky frequencies: 1381.365789 1381.365789 1381.365789 1381.365789 1381.365789 1381.365789 1381.365789 1381.365789 1381.365789 2011-Dec-13 03:56:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.365789 sky0=1381.365789 sky1=1381.365789 sky2=1381.365789 sky3=1381.365789 sky4=1381.365789 sky5=1381.365789 sky6=1381.365789 sky7=1381.365789 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-13 03:56:03 LOG2 dopset_gen: Result from 'sky2syn': 1631.365789 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-13 03:56:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631365789.0} 2011-Dec-13 03:56:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 03:56:03 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-13 03:56:03 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-13 03:56:03 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.0 Dec = +21:13:46.5 2011-Dec-13 03:56:03 LOG3 track_source: Calling 'track_source AGES3193_p3_107 095203.0 211346.5 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-13 03:56:03 START begin_task: Starting task 'sending tracking commands' 2011-Dec-13 03:56:03 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2011-Dec-13 03:56:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_107} INFO {Slewing to source 'AGES3193_p3_107' ...} 2011-Dec-13 03:56:03 INFO1 track_source: Starting to track AGES3193_p3_107 2011-Dec-13 03:56:03 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_107" 2011-Dec-13 03:56:03 LOG3 vw_send: To DATATAKING: set ra 095203.0 2011-Dec-13 03:56:03 LOG3 vw_send: To DATATAKING: set dec 211346.5 2011-Dec-13 03:56:03 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-13 03:56:03 LOG3 vw_send: To DATATAKING: pnt tr 095203.0 211346.5 -CJ 2011-Dec-13 03:56:03 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 03:56:03 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-13 03:56:03 LOG5 finish_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2011-Dec-13 03:56:03 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-13 03:56:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 03:56:03 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-13 03:56:03 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2011-Dec-13 03:56:03 START begin_task: Starting task 'waiting on telescope' 2011-Dec-13 03:56:03 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2011-Dec-13 03:56:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-13 03:56:03 LOG3 waittrk: Start waittrk 5 2011-Dec-13 03:56:03 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-13 03:56:03 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2011-Dec-13 03:56:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631365789.0} 2011-Dec-13 03:56:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 03:56:03 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_107" 2011-Dec-13 03:56:03 LOG4 got_cormsg: From DATATAKING: set ra 095203.0 2011-Dec-13 03:56:03 LOG4 got_cormsg: From DATATAKING: set dec 211346.5 2011-Dec-13 03:56:03 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-13 03:56:03 LOG4 got_cormsg: From DATATAKING: vw% 095203.0 2011-Dec-13 03:56:03 LOG4 got_cormsg: From DATATAKING: vw% 211346.5 2011-Dec-13 03:56:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:56:03 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-13 03:56:03 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.0 211346.5 -CJ 2011-Dec-13 03:56:03 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 03:56:03 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-13 03:56:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:56:08 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-13 03:56:08 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2011-Dec-13 03:56:08 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-13 03:56:08 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2011-Dec-13 03:56:10 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-13 03:56:10 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2011-Dec-13 03:56:10 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-13 03:56:10 INFO2 waittrk: Now tracking AGES3193_p3_107 2011-Dec-13 03:56:10 LOG4 waittrk: Current telescope position: Az = 255.32 ZA = 13.69 2011-Dec-13 03:56:10 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-13 03:56:10 LOG5 finish_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2011-Dec-13 03:56:10 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-13 03:56:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 03:56:10 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-13 03:56:10 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2011-Dec-13 03:56:10 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-13 03:56:10 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2011-Dec-13 03:56:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-13 03:56:10 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-13 03:56:10 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-13 03:56:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-13 03:56:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 03:56:10 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-13 03:56:10 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2011-Dec-13 03:56:11 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-13 03:56:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 03:56:13 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:56:13 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-13 03:56:13 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-13 03:56:13 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2011-Dec-13 03:56:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-13 03:56:13 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-13 03:56:13 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2011-Dec-13 03:56:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-13 03:56:13 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-13 03:56:13 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-13 03:56:13 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-13 03:56:13 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-13 03:56:13 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-13 03:56:13 LOG5 begin_task: Level: (5) ID = <10040> Status = 0 0 0 0 ok 2011-Dec-13 03:56:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-13 03:56:13 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:56:14 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 8 6 dB 2011-Dec-13 03:56:14 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 3 4 dB 2011-Dec-13 03:56:14 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 3 dB 2011-Dec-13 03:56:14 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2011-Dec-13 03:56:14 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-13 03:56:14 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-13 03:56:14 LOG5 end_task: Level: (5) ID = <10040> Status = 0 0 0 0 ok 2011-Dec-13 03:56:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.917 0.872 ALFA beam 1: 0.947 0.960 2011-Dec-13 03:56:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.920 0.986 ALFA beam 3: 1.106 0.925 2011-Dec-13 03:56:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.851 0.903 ALFA beam 5: 1.024 0.906 2011-Dec-13 03:56:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.938 0.014 ALFA beam 7: 1.040 0.014 2011-Dec-13 03:56:14 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-13 03:56:14 LOG5 finish_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2011-Dec-13 03:56:14 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-13 03:56:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 03:56:14 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-13 03:56:14 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2011-Dec-13 03:56:14 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-13 03:56:14 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2011-Dec-13 03:56:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-13 03:56:14 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-13 03:56:14 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-13 03:56:14 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-13 03:56:14 LOG5 begin_task: Level: (5) ID = <10042> Status = 0 0 0 0 ok 2011-Dec-13 03:56:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-13 03:56:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.917 0.872 0.947 0.960 2011-Dec-13 03:56:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.920 0.986 1.106 0.925 2011-Dec-13 03:56:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.851 0.903 1.024 0.906 2011-Dec-13 03:56:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.938 0.014 1.040 0.014 2011-Dec-13 03:56:21 INFO3 from_mock: From MOCK: b0s0g0 rms:A 32.4 28.5 B 30.7 30.8 mn:A -0.0 0.0 B -0.3 -0.3 gn: 11 11 2011-Dec-13 03:56:21 INFO3 from_mock: From MOCK: b0s1g0 rms:A 20.9 20.0 B 24.7 26.2 mn:A 0.2 -0.4 B -0.3 0.3 gn: 6 6 2011-Dec-13 03:56:21 INFO3 from_mock: From MOCK: b1s0g0 rms:A 31.2 29.2 B 33.4 29.3 mn:A 0.7 0.7 B 0.3 0.3 gn: 7 11 2011-Dec-13 03:56:21 INFO3 from_mock: From MOCK: b1s1g0 rms:A 19.0 17.5 B 21.2 21.3 mn:A -0.1 -0.1 B 0.6 0.3 gn: 0 2 2011-Dec-13 03:56:21 INFO3 from_mock: From MOCK: b2s0g0 rms:A 28.9 28.0 B 28.2 29.5 mn:A -0.1 -0.4 B 0.2 -0.0 gn: 10 11 2011-Dec-13 03:56:21 INFO3 from_mock: From MOCK: b2s1g0 rms:A 21.1 21.3 B 24.2 22.5 mn:A 0.4 -0.1 B 0.3 0.3 gn: 6 7 2011-Dec-13 03:56:21 INFO3 from_mock: From MOCK: b3s0g0 rms:A 29.5 29.3 B 31.5 28.1 mn:A 0.4 -0.3 B -0.0 -0.3 gn: 12 12 2011-Dec-13 03:56:21 INFO3 from_mock: From MOCK: b3s1g0 rms:A 26.2 25.5 B 21.9 22.8 mn:A -0.2 0.3 B 0.1 0.2 gn: 9 6 2011-Dec-13 03:56:21 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.9 29.9 B 28.5 28.6 mn:A -0.3 -0.3 B -0.4 0.1 gn: 13 11 2011-Dec-13 03:56:21 INFO3 from_mock: From MOCK: b4s1g0 rms:A 23.5 21.2 B 24.7 23.9 mn:A -0.1 -0.1 B -0.3 0.1 gn: 12 10 2011-Dec-13 03:56:21 INFO3 from_mock: From MOCK: b5s0g0 rms:A 30.4 29.3 B 31.8 31.8 mn:A 0.3 0.3 B -0.1 0.4 gn: 12 11 2011-Dec-13 03:56:21 INFO3 from_mock: From MOCK: b5s1g0 rms:A 18.3 18.2 B 24.5 24.3 mn:A -0.4 0.5 B 0.1 0.3 gn: 4 4 2011-Dec-13 03:56:21 INFO3 from_mock: From MOCK: b6s0g0 rms:A 30.4 27.8 B 14.2 14.6 mn:A -0.5 0.2 B 0.6 -0.4 gn: 12 31 2011-Dec-13 03:56:21 INFO3 from_mock: From MOCK: b6s1g0 rms:A 22.1 20.1 B 12.1 11.8 mn:A 0.8 0.8 B 0.3 0.3 gn: 4 31 2011-Dec-13 03:56:21 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-13 03:56:21 LOG5 end_task: Level: (5) ID = <10042> Status = 0 0 0 0 ok 2011-Dec-13 03:56:21 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-13 03:56:21 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-13 03:56:21 LOG5 finish_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2011-Dec-13 03:56:21 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-13 03:56:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 03:56:21 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-13 03:56:21 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2011-Dec-13 03:56:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-13 03:56:21 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-13 03:56:21 LOG5 finish_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2011-Dec-13 03:56:21 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-13 03:56:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 03:56:21 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-13 03:56:21 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2011-Dec-13 03:56:21 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ep 2011-Dec-13 03:56:21 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ep 2011-Dec-13 03:56:21 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ep 2011-Dec-13 03:56:21 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ep 2011-Dec-13 03:56:21 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20111213.a2048.0000.fits' is empty! 2011-Dec-13 03:56:21 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-13 03:56:21 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-13 03:56:21 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2011-Dec-13 03:56:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-13 03:56:21 START begin_task: Starting task 'selecting calibration type' 2011-Dec-13 03:56:21 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2011-Dec-13 03:56:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-13 03:56:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-13 03:56:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 03:56:21 START begin_task: Starting task 'waiting on setcal' 2011-Dec-13 03:56:21 LOG5 begin_task: Level: (5) ID = <10045> Status = 0 0 0 0 ok 2011-Dec-13 03:56:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ep' 2011-Dec-13 03:56:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-13 03:56:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 03:56:21 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:56:21 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-13 03:56:21 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-13 03:56:21 LOG5 end_task: Level: (5) ID = <10045> Status = 0 0 0 0 ok 2011-Dec-13 03:56:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-13 03:56:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-13 03:56:21 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-13 03:56:21 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-13 03:56:21 LOG5 begin_task: Level: (5) ID = <10046> Status = 0 0 0 0 ok 2011-Dec-13 03:56:21 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:56:22 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-13 03:56:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-13 03:56:22 LOG5 end_task: Level: (5) ID = <10046> Status = 0 0 0 0 ok 2011-Dec-13 03:56:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-13 03:56:22 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-13 03:56:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-13 03:56:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-13 03:56:22 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-13 03:56:22 LOG5 begin_task: Level: (5) ID = <10047> Status = 0 0 0 0 ok 2011-Dec-13 03:56:22 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-13 03:56:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-13 03:56:22 LOG5 end_task: Level: (5) ID = <10047> Status = 0 0 0 0 ok 2011-Dec-13 03:56:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-13 03:56:22 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-13 03:56:22 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-13 03:56:22 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2011-Dec-13 03:56:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-13 03:56:22 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-13 03:56:22 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-13 03:56:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-13 03:56:22 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2011-Dec-13 03:56:22 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-13 03:56:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-13 03:56:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-13 03:56:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-13 03:56:22 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2011-Dec-13 03:56:22 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-13 03:56:22 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-13 03:56:22 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2011-Dec-13 03:56:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-13 03:56:22 LOG5 log_alfabeam: Parameters: 9.8674999999999997 21.229583333333331 8.932801 2011.9504835919083 -59.900074 2011-Dec-13 03:56:22 LOG4 log_alfabeam: ALFABEAM 0 9.867499999999998 21.229583333333331 2011-Dec-13 03:56:22 LOG4 log_alfabeam: ALFABEAM 1 9.868542912353007 21.139349877246257 2011-Dec-13 03:56:22 LOG4 log_alfabeam: ALFABEAM 2 9.874547191259193 21.199240534258895 2011-Dec-13 03:56:22 LOG4 log_alfabeam: ALFABEAM 3 9.873479233263039 21.290033673880625 2011-Dec-13 03:56:22 LOG4 log_alfabeam: ALFABEAM 4 9.866413368270104 21.319718620754298 2011-Dec-13 03:56:22 LOG4 log_alfabeam: ALFABEAM 5 9.860446455504453 21.259235143664483 2011-Dec-13 03:56:22 LOG4 log_alfabeam: ALFABEAM 6 9.861507971774813 21.169658653693002 2011-Dec-13 03:56:22 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-13 03:56:22 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-13 03:56:22 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-13 03:56:22 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_107 2011-Dec-13 03:56:22 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-13 03:56:22 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-13 03:56:22 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-13 03:56:22 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-13 03:56:22 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-13 03:56:22 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-13 03:56:22 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-13 03:56:22 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-13 03:56:22 LOG3 take_mock_data: PSET configuration: patternid=134700052 2011-Dec-13 03:56:22 LOG3 take_mock_data: PSET configuration: scanid=134700052 2011-Dec-13 03:56:22 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-13 03:56:22 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-13 03:56:22 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-13 03:56:22 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456365789.0 2011-Dec-13 03:56:22 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306365789.0 2011-Dec-13 03:56:22 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-13 03:56:22 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-13 03:56:22 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_107:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=134700052:scanid=134700052:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456365789.0:topobfreqhz=1306365789.0:filetype=1 2011-Dec-13 03:56:22 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-13 03:56:22 LOG5 begin_task: Level: (5) ID = <10050> Status = 0 0 0 0 ok 2011-Dec-13 03:56:22 LOG4 from_mock: From MOCK: psetok 2011-Dec-13 03:56:22 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-13 03:56:22 LOG5 end_task: Level: (5) ID = <10050> Status = 0 0 0 0 ok 2011-Dec-13 03:56:22 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-13 03:56:22 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-13 03:56:22 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-13 03:56:22 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-13 03:56:22 LOG5 begin_task: Level: (5) ID = <10051> Status = 0 0 0 0 ok 2011-Dec-13 03:56:22 LOG4 from_mock: From MOCK: starok 2011-Dec-13 03:56:22 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-13 03:56:22 LOG5 end_task: Level: (5) ID = <10051> Status = 0 0 0 0 ok 2011-Dec-13 03:56:22 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-13 03:56:22 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134700052 2011-Dec-13 03:56:23 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-13 03:56:23 LOG5 begin_task: Level: (5) ID = <10052> Status = 0 0 0 0 ok 2011-Dec-13 03:56:23 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-13 03:56:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 03:56:23 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-13 03:56:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-13 03:56:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28584.00 2011-Dec-13 03:56:24 INFO2 got_mock_message: Mock spectrometer start file number is 00000 2011-Dec-13 03:56:24 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-13 03:56:24 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-13 03:56:24 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-13 03:56:24 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-13 03:56:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-13 03:56:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-13 03:56:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-13 03:56:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-13 03:56:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-13 03:56:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-13 03:56:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-13 03:56:24 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-13 03:56:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 03:56:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 03:56:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 03:56:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 03:56:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 03:56:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 03:56:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 03:56:27 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:56:27.01 2011-Dec-13 03:56:27 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323762987.01 Tue Dec 13 03:56:27 2011 2011-Dec-13 03:56:27 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-13 03:56:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.365789 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 03:56:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.365789 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 03:56:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.365789 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 03:56:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.365789 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 03:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2011-Dec-13 03:56:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.365789 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 03:56:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.365789 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 03:56:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.365789 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 03:56:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.365789 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 03:56:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.365789 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 03:56:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 03:56:33 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-13 03:56:33 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-13 03:56:33 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-13 03:56:33 LOG5 end_task: Level: (5) ID = <10052> Status = 0 0 0 0 ok 2011-Dec-13 03:56:33 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-13 03:56:33 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2011-Dec-13 03:56:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-13 03:56:33 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-13 03:56:33 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-13 03:56:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-13 03:56:33 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2011-Dec-13 03:56:33 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-13 03:56:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-13 03:56:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-13 03:56:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-13 03:56:33 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2011-Dec-13 03:56:33 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-13 03:56:33 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-13 03:56:33 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2011-Dec-13 03:56:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-13 03:56:33 LOG5 log_alfabeam: Parameters: 9.8674999999999997 21.229583333333331 8.935865 2011.9504839404772 -59.900074 2011-Dec-13 03:56:33 LOG4 log_alfabeam: ALFABEAM 0 9.867499999999998 21.229583333333327 2011-Dec-13 03:56:33 LOG4 log_alfabeam: ALFABEAM 1 9.868547990249741 21.139361389694489 2011-Dec-13 03:56:33 LOG4 log_alfabeam: ALFABEAM 2 9.874548916412715 21.199318163488496 2011-Dec-13 03:56:33 LOG4 log_alfabeam: ALFABEAM 3 9.873475752473547 21.290101292044785 2011-Dec-13 03:56:33 LOG4 log_alfabeam: ALFABEAM 4 9.866408152828489 21.319706306824528 2011-Dec-13 03:56:33 LOG4 log_alfabeam: ALFABEAM 5 9.860444761716057 21.259155425103419 2011-Dec-13 03:56:33 LOG4 log_alfabeam: ALFABEAM 6 9.861511365271625 21.169592742768099 2011-Dec-13 03:56:33 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-13 03:56:33 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-13 03:56:33 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-13 03:56:33 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_107 2011-Dec-13 03:56:33 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-13 03:56:33 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-13 03:56:33 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-13 03:56:33 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-13 03:56:33 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-13 03:56:33 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-13 03:56:33 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-13 03:56:33 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-13 03:56:33 LOG3 take_mock_data: PSET configuration: patternid=134700052 2011-Dec-13 03:56:33 LOG3 take_mock_data: PSET configuration: scanid=134700053 2011-Dec-13 03:56:33 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-13 03:56:33 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-13 03:56:33 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-13 03:56:33 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456365789.0 2011-Dec-13 03:56:33 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306365789.0 2011-Dec-13 03:56:33 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-13 03:56:33 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-13 03:56:33 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_107:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=134700052:scanid=134700053:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456365789.0:topobfreqhz=1306365789.0:filetype=1 2011-Dec-13 03:56:33 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-13 03:56:33 LOG5 begin_task: Level: (5) ID = <10055> Status = 0 0 0 0 ok 2011-Dec-13 03:56:33 LOG4 from_mock: From MOCK: psetok 2011-Dec-13 03:56:33 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-13 03:56:33 LOG5 end_task: Level: (5) ID = <10055> Status = 0 0 0 0 ok 2011-Dec-13 03:56:33 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-13 03:56:33 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-13 03:56:33 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-13 03:56:33 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-13 03:56:33 LOG5 begin_task: Level: (5) ID = <10056> Status = 0 0 0 0 ok 2011-Dec-13 03:56:33 LOG4 from_mock: From MOCK: starok 2011-Dec-13 03:56:33 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-13 03:56:33 LOG5 end_task: Level: (5) ID = <10056> Status = 0 0 0 0 ok 2011-Dec-13 03:56:33 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-13 03:56:33 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134700053 2011-Dec-13 03:56:33 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-13 03:56:33 LOG5 begin_task: Level: (5) ID = <10057> Status = 0 0 0 0 ok 2011-Dec-13 03:56:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 03:56:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-13 03:56:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28594.00 2011-Dec-13 03:56:34 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-13 03:56:34 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-13 03:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.526 (still bad) 2011-Dec-13 03:56:36 INFO2 got_mock_message: Mock spectrometer start file number is 00100 2011-Dec-13 03:56:36 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-13 03:56:36 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-13 03:56:36 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-13 03:56:36 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-13 03:56:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-13 03:56:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-13 03:56:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-13 03:56:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-13 03:56:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-13 03:56:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-13 03:56:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-13 03:56:36 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-13 03:56:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 03:56:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 03:56:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 03:56:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 03:56:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 03:56:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 03:56:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 03:56:39 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:56:39.02 2011-Dec-13 03:56:39 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323762999.02 Tue Dec 13 03:56:39 2011 2011-Dec-13 03:56:39 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-13 03:56:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.365789 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 03:56:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.365789 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 03:56:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.365789 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 03:56:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.365789 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 03:56:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.365789 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 03:56:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.365789 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 03:56:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.365789 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 03:56:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.365789 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 03:56:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.365789 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 03:56:39 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-13 03:56:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 03:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2011-Dec-13 03:56:45 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-13 03:56:45 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-13 03:56:45 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-13 03:56:45 LOG5 end_task: Level: (5) ID = <10057> Status = 0 0 0 0 ok 2011-Dec-13 03:56:45 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-13 03:56:45 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2011-Dec-13 03:56:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-13 03:56:45 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-13 03:56:45 LOG5 finish_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2011-Dec-13 03:56:45 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-13 03:56:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 03:56:45 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-13 03:56:45 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2011-Dec-13 03:56:45 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-13 03:56:45 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 255.77 and ZA = 13.70 2011-Dec-13 03:56:45 LOG3 track_source: Calling 'track_source AGES3193_p3_107 255.77 13.7018916866 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-13 03:56:45 START begin_task: Starting task 'sending tracking commands' 2011-Dec-13 03:56:45 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2011-Dec-13 03:56:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_107} INFO {Slewing to source 'AGES3193_p3_107' ...} 2011-Dec-13 03:56:45 INFO1 track_source: Starting to track AGES3193_p3_107 2011-Dec-13 03:56:45 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_107" 2011-Dec-13 03:56:45 LOG3 vw_send: To DATATAKING: set ra 255.77 2011-Dec-13 03:56:45 LOG3 vw_send: To DATATAKING: set dec 13.7018916866 2011-Dec-13 03:56:45 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-13 03:56:45 LOG3 vw_send: To DATATAKING: pnt tr 255.77 13.7018916866 -CF 2011-Dec-13 03:56:45 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 03:56:45 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-13 03:56:45 LOG5 finish_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2011-Dec-13 03:56:45 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-13 03:56:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 03:56:45 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-13 03:56:45 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2011-Dec-13 03:56:45 LOG1 fixed_driftmap: Parameters: HA = -00:57:01.0 Start = 08:56:40.6 LST = 08:56:21.1 diff = 19.5 secs 2011-Dec-13 03:56:45 INFO2 fixed_driftmap: Waiting 17.5 seconds for RA 9:53:42 2011-Dec-13 03:56:45 INFO2 lstwait: Waiting for 17.4 secs from LST 08:56:21 to LST 08:56:39 ... 2011-Dec-13 03:56:45 LOG4 send_obs_status: To obs_status: <1> TASKTIME 17.444987516166869 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-13 03:56:45 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-13 03:56:45 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2011-Dec-13 03:56:45 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_107" 2011-Dec-13 03:56:45 LOG4 got_cormsg: From DATATAKING: set ra 255.77 2011-Dec-13 03:56:45 LOG4 got_cormsg: From DATATAKING: set dec 13.7018916866 2011-Dec-13 03:56:45 LOG4 got_cormsg: From DATATAKING: vw% 255.77 2011-Dec-13 03:56:45 LOG4 got_cormsg: From DATATAKING: vw% 13.7018916866 2011-Dec-13 03:56:45 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:56:45 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-13 03:56:45 LOG4 got_cormsg: From DATATAKING: pnt tr 255.77 13.7018916866 -CF 2011-Dec-13 03:56:45 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 03:56:45 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-13 03:56:45 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 03:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2011-Dec-13 03:57:02 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-13 03:57:02 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2011-Dec-13 03:57:02 LOG4 lstwait: Finished waiting 0.56 seconds late 2011-Dec-13 03:57:02 INFO3 lstwait: Finished waiting 2011-Dec-13 03:57:03 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-13 03:57:03 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-13 03:57:03 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-13 03:57:03 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-13 03:57:03 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-13 03:57:03 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-13 03:57:03 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2011-Dec-13 03:57:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-13 03:57:03 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-13 03:57:03 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-13 03:57:03 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-13 03:57:03 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-13 03:57:03 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_107 2011-Dec-13 03:57:03 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-13 03:57:03 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-13 03:57:03 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-13 03:57:03 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-13 03:57:03 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-13 03:57:03 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-13 03:57:03 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-13 03:57:03 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-13 03:57:03 LOG3 take_mock_data: PSET configuration: patternid=134700054 2011-Dec-13 03:57:03 LOG3 take_mock_data: PSET configuration: scanid=134700054 2011-Dec-13 03:57:03 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-13 03:57:03 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-13 03:57:03 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-13 03:57:03 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456365789.0 2011-Dec-13 03:57:03 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306365789.0 2011-Dec-13 03:57:03 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-13 03:57:03 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-13 03:57:03 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_107:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=134700054:scanid=134700054:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456365789.0:topobfreqhz=1306365789.0:filetype=1 2011-Dec-13 03:57:03 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-13 03:57:03 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2011-Dec-13 03:57:03 LOG4 from_mock: From MOCK: psetok 2011-Dec-13 03:57:03 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-13 03:57:03 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2011-Dec-13 03:57:03 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-13 03:57:03 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-13 03:57:03 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-13 03:57:03 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-13 03:57:03 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2011-Dec-13 03:57:03 LOG4 from_mock: From MOCK: starok 2011-Dec-13 03:57:03 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-13 03:57:03 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2011-Dec-13 03:57:03 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-13 03:57:03 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 134700054 2011-Dec-13 03:57:03 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-13 03:57:03 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2011-Dec-13 03:57:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 03:57:03 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-13 03:57:03 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-13 03:57:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-13 03:57:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28624.00 2011-Dec-13 03:57:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.365789 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 03:57:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.365789 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 03:57:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.365789 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 03:57:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.365789 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 03:57:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.365789 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 03:57:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.365789 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 03:57:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.365789 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 03:57:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.365789 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 03:57:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.365789 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 03:57:05 INFO2 got_mock_message: Mock spectrometer start file number is 00200 2011-Dec-13 03:57:05 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-13 03:57:05 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1199.9 s 2011-Dec-13 03:57:05 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-13 03:57:05 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-13 03:57:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-13 03:57:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-13 03:57:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-13 03:57:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-13 03:57:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-13 03:57:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-13 03:57:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-13 03:57:05 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-13 03:57:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 03:57:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 03:57:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 03:57:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 03:57:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 03:57:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 03:57:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 03:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.110 (still bad) 2011-Dec-13 03:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2011-Dec-13 03:57:08 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:57:08.01 2011-Dec-13 03:57:08 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323763028.01 Tue Dec 13 03:57:08 2011 2011-Dec-13 03:57:08 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-13 03:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.111 (still bad) 2011-Dec-13 03:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-13 03:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.142 (still bad) 2011-Dec-13 03:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-13 03:57:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-13 03:57:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 0.883 0.941 0.950 2011-Dec-13 03:57:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.931 1.003 1.116 0.931 2011-Dec-13 03:57:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.863 0.925 1.015 0.915 2011-Dec-13 03:57:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.954 0.020 1.039 0.020 2011-Dec-13 03:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-13 03:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-13 03:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-13 03:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.135 (still bad) 2011-Dec-13 03:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2011-Dec-13 03:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2011-Dec-13 03:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.142 (still bad) 2011-Dec-13 03:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.145 (still bad) 2011-Dec-13 03:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.149 (still bad) 2011-Dec-13 03:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.167 (still bad) 2011-Dec-13 03:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.157 (still bad) 2011-Dec-13 03:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.155 (still bad) 2011-Dec-13 03:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.154 (still bad) 2011-Dec-13 03:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.145 (still bad) 2011-Dec-13 03:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.141 (still bad) 2011-Dec-13 03:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.147 (still bad) 2011-Dec-13 03:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2011-Dec-13 03:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2011-Dec-13 03:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-13 03:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-13 03:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-13 03:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.121 (still bad) 2011-Dec-13 03:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-13 03:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-13 03:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.105 (still bad) 2011-Dec-13 03:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-13 03:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-13 03:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.114 (still bad) 2011-Dec-13 03:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-13 03:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-13 03:58:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-13 03:58:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 0.885 0.947 0.956 2011-Dec-13 03:58:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.933 1.007 1.106 0.926 2011-Dec-13 03:58:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.882 0.952 1.019 0.920 2011-Dec-13 03:58:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.960 0.024 1.044 0.024 2011-Dec-13 03:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2011-Dec-13 03:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.104 (still bad) 2011-Dec-13 03:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-13 03:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.105 (still bad) 2011-Dec-13 03:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.104 (still bad) 2011-Dec-13 03:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.106 (still bad) 2011-Dec-13 03:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.103 (still bad) 2011-Dec-13 03:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.104 (still bad) 2011-Dec-13 03:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.115 (still bad) 2011-Dec-13 03:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2011-Dec-13 03:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.104 (still bad) 2011-Dec-13 03:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2011-Dec-13 03:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.103 (still bad) 2011-Dec-13 03:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.103 (still bad) 2011-Dec-13 03:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-13 03:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-13 03:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2011-Dec-13 03:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.104 (still bad) 2011-Dec-13 03:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.105 (still bad) 2011-Dec-13 03:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.105 (still bad) 2011-Dec-13 03:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-13 03:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-13 03:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2011-Dec-13 03:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.103 (still bad) 2011-Dec-13 03:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.104 (still bad) 2011-Dec-13 03:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.127 (still bad) 2011-Dec-13 03:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2011-Dec-13 03:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.105 (still bad) 2011-Dec-13 03:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-13 03:59:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-13 03:59:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 0.882 0.941 0.952 2011-Dec-13 03:59:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.932 1.005 1.103 0.924 2011-Dec-13 03:59:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.864 0.924 1.015 0.917 2011-Dec-13 03:59:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.953 0.021 1.038 0.021 2011-Dec-13 03:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.105 (still bad) 2011-Dec-13 03:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.129 (still bad) 2011-Dec-13 03:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2011-Dec-13 03:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.106 (still bad) 2011-Dec-13 03:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.111 (still bad) 2011-Dec-13 03:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.105 (still bad) 2011-Dec-13 03:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-13 03:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.129 (still bad) 2011-Dec-13 03:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-13 03:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-13 03:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2011-Dec-13 03:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-13 03:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-13 03:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.127 (still bad) 2011-Dec-13 03:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-13 03:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-13 03:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2011-Dec-13 03:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.103 (still bad) 2011-Dec-13 03:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.102 (still bad) 2011-Dec-13 04:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.124 (still bad) 2011-Dec-13 04:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-13 04:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-13 04:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.106 (still bad) 2011-Dec-13 04:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.101 (still bad) 2011-Dec-13 04:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.101 (still bad) 2011-Dec-13 04:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.124 (still bad) 2011-Dec-13 04:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-13 04:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-13 04:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2011-Dec-13 04:00:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-13 04:00:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 0.879 0.944 0.952 2011-Dec-13 04:00:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.931 1.004 1.103 0.922 2011-Dec-13 04:00:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.864 0.925 1.018 0.916 2011-Dec-13 04:00:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.952 0.021 1.037 0.021 2011-Dec-13 04:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.104 (still bad) 2011-Dec-13 04:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-13 04:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.106 (still bad) 2011-Dec-13 04:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-13 04:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-13 04:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2011-Dec-13 04:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-13 04:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-13 04:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2011-Dec-13 04:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.102 (still bad) 2011-Dec-13 04:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-13 04:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2011-Dec-13 04:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2011-Dec-13 04:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-13 04:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.102 (still bad) 2011-Dec-13 04:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.103 (still bad) 2011-Dec-13 04:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.104 (still bad) 2011-Dec-13 04:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.102 (still bad) 2011-Dec-13 04:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.103 (still bad) 2011-Dec-13 04:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-13 04:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-13 04:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-13 04:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-13 04:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-13 04:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-13 04:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2011-Dec-13 04:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.105 (still bad) 2011-Dec-13 04:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.102 (still bad) 2011-Dec-13 04:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.106 (still bad) 2011-Dec-13 04:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.103 (still bad) 2011-Dec-13 04:01:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-13 04:01:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 0.881 0.949 0.952 2011-Dec-13 04:01:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.933 1.003 1.104 0.925 2011-Dec-13 04:01:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.864 0.924 1.018 0.916 2011-Dec-13 04:01:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.954 0.021 1.041 0.022 2011-Dec-13 04:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-13 04:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-13 04:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-13 04:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.104 (still bad) 2011-Dec-13 04:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.104 (still bad) 2011-Dec-13 04:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.105 (still bad) 2011-Dec-13 04:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-13 04:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-13 04:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-13 04:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-13 04:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-13 04:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-13 04:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-13 04:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-13 04:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-13 04:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2011-Dec-13 04:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.104 (still bad) 2011-Dec-13 04:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2011-Dec-13 04:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-13 04:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2011-Dec-13 04:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.102 (still bad) 2011-Dec-13 04:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.102 (still bad) 2011-Dec-13 04:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.103 (still bad) 2011-Dec-13 04:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2011-Dec-13 04:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2011-Dec-13 04:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.104 (still bad) 2011-Dec-13 04:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.103 (still bad) 2011-Dec-13 04:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-13 04:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2011-Dec-13 04:02:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-13 04:02:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.941 0.896 0.963 0.967 2011-Dec-13 04:02:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 1.028 1.122 0.936 2011-Dec-13 04:02:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.873 0.938 1.036 0.931 2011-Dec-13 04:02:25 LOG4 check_wapp_levels: WAPP-4 power levels: 0.968 0.027 1.055 0.028 2011-Dec-13 04:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-13 04:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-13 04:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.106 (still bad) 2011-Dec-13 04:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.104 (still bad) 2011-Dec-13 04:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.104 (still bad) 2011-Dec-13 04:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.123 (still bad) 2011-Dec-13 04:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.105 (still bad) 2011-Dec-13 04:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.104 (still bad) 2011-Dec-13 04:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.107 (still bad) 2011-Dec-13 04:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-13 04:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-13 04:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.123 (still bad) 2011-Dec-13 04:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.108 (still bad) 2011-Dec-13 04:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.104 (still bad) 2011-Dec-13 04:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.106 (still bad) 2011-Dec-13 04:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-13 04:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-13 04:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.125 (still bad) 2011-Dec-13 04:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-13 04:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2011-Dec-13 04:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-13 04:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.103 (still bad) 2011-Dec-13 04:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.105 (still bad) 2011-Dec-13 04:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.121 (still bad) 2011-Dec-13 04:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2011-Dec-13 04:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.105 (still bad) 2011-Dec-13 04:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2011-Dec-13 04:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.105 (still bad) 2011-Dec-13 04:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-13 04:03:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2011-Dec-13 04:03:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.897 0.968 0.969 2011-Dec-13 04:03:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 1.027 1.120 0.937 2011-Dec-13 04:03:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.875 0.938 1.052 0.933 2011-Dec-13 04:03:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.973 0.028 1.060 0.028 2011-Dec-13 04:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.107 (still bad) 2011-Dec-13 04:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.103 (still bad) 2011-Dec-13 04:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2011-Dec-13 04:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.104 (still bad) 2011-Dec-13 04:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.102 (still bad) 2011-Dec-13 04:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-13 04:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.105 (still bad) 2011-Dec-13 04:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.103 (still bad) 2011-Dec-13 04:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-13 04:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.105 (still bad) 2011-Dec-13 04:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.105 (still bad) 2011-Dec-13 04:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.122 (still bad) 2011-Dec-13 04:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.107 (still bad) 2011-Dec-13 04:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.104 (still bad) 2011-Dec-13 04:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-13 04:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.105 (still bad) 2011-Dec-13 04:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-13 04:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-13 04:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-13 04:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.105 (still bad) 2011-Dec-13 04:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.107 (still bad) 2011-Dec-13 04:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.106 (still bad) 2011-Dec-13 04:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.107 (still bad) 2011-Dec-13 04:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2011-Dec-13 04:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-13 04:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-13 04:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2011-Dec-13 04:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.106 (still bad) 2011-Dec-13 04:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-13 04:04:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-13 04:04:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 0.889 0.955 0.955 2011-Dec-13 04:04:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.941 1.011 1.112 0.927 2011-Dec-13 04:04:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.867 0.929 1.025 0.920 2011-Dec-13 04:04:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.959 0.023 1.044 0.023 2011-Dec-13 04:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-13 04:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-13 04:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2011-Dec-13 04:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.104 (still bad) 2011-Dec-13 04:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-13 04:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2011-Dec-13 04:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-13 04:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.106 (still bad) 2011-Dec-13 04:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-13 04:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.105 (still bad) 2011-Dec-13 04:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-13 04:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2011-Dec-13 04:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-13 04:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.105 (still bad) 2011-Dec-13 04:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-13 04:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-13 04:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2011-Dec-13 04:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2011-Dec-13 04:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-13 04:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.106 (still bad) 2011-Dec-13 04:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2011-Dec-13 04:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.106 (still bad) 2011-Dec-13 04:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-13 04:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-13 04:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-13 04:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.107 (still bad) 2011-Dec-13 04:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-13 04:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-13 04:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-13 04:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-13 04:05:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-13 04:05:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 0.884 0.952 0.959 2011-Dec-13 04:05:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 1.003 1.107 0.924 2011-Dec-13 04:05:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.865 0.926 1.020 0.918 2011-Dec-13 04:05:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.955 0.020 1.039 0.021 2011-Dec-13 04:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.106 (still bad) 2011-Dec-13 04:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2011-Dec-13 04:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.105 (still bad) 2011-Dec-13 04:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.108 (still bad) 2011-Dec-13 04:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.114 (still bad) 2011-Dec-13 04:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.108 (still bad) 2011-Dec-13 04:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-13 04:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2011-Dec-13 04:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.105 (still bad) 2011-Dec-13 04:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.131 (still bad) 2011-Dec-13 04:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2011-Dec-13 04:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-13 04:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2011-Dec-13 04:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-13 04:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-13 04:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.114 (still bad) 2011-Dec-13 04:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2011-Dec-13 04:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.106 (still bad) 2011-Dec-13 04:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2011-Dec-13 04:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-13 04:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2011-Dec-13 04:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-13 04:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2011-Dec-13 04:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-13 04:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2011-Dec-13 04:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-13 04:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-13 04:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.115 (still bad) 2011-Dec-13 04:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-13 04:06:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-13 04:06:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 0.882 0.943 0.952 2011-Dec-13 04:06:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 1.003 1.107 0.926 2011-Dec-13 04:06:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 0.929 1.022 0.920 2011-Dec-13 04:06:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.956 0.020 1.039 0.021 2011-Dec-13 04:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.107 (still bad) 2011-Dec-13 04:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.106 (still bad) 2011-Dec-13 04:06:36 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.106 (still bad) 2011-Dec-13 04:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.116 (still bad) 2011-Dec-13 04:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2011-Dec-13 04:06:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-13 04:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2011-Dec-13 04:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-13 04:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-13 04:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.116 (still bad) 2011-Dec-13 04:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-13 04:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-13 04:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2011-Dec-13 04:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-13 04:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.106 (still bad) 2011-Dec-13 04:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-13 04:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-13 04:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-13 04:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2011-Dec-13 04:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2011-Dec-13 04:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2011-Dec-13 04:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.116 (still bad) 2011-Dec-13 04:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2011-Dec-13 04:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-13 04:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2011-Dec-13 04:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2011-Dec-13 04:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2011-Dec-13 04:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.114 (still bad) 2011-Dec-13 04:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2011-Dec-13 04:07:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-13 04:07:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 0.887 0.949 0.958 2011-Dec-13 04:07:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 1.005 1.113 0.933 2011-Dec-13 04:07:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.868 0.928 1.027 0.923 2011-Dec-13 04:07:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.958 0.023 1.046 0.023 2011-Dec-13 04:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2011-Dec-13 04:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-13 04:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2011-Dec-13 04:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-13 04:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-13 04:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-13 04:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.105 (still bad) 2011-Dec-13 04:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.106 (still bad) 2011-Dec-13 04:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2011-Dec-13 04:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-13 04:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.104 (still bad) 2011-Dec-13 04:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2011-Dec-13 04:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.105 (still bad) 2011-Dec-13 04:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.105 (still bad) 2011-Dec-13 04:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2011-Dec-13 04:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-13 04:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-13 04:08:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-13 04:08:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-13 04:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-13 04:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2011-Dec-13 04:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-13 04:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-13 04:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2011-Dec-13 04:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.104 (still bad) 2011-Dec-13 04:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2011-Dec-13 04:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-13 04:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-13 04:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.104 (still bad) 2011-Dec-13 04:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2011-Dec-13 04:08:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-13 04:08:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 0.886 0.945 0.953 2011-Dec-13 04:08:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 1.002 1.105 0.925 2011-Dec-13 04:08:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.865 0.927 1.019 0.917 2011-Dec-13 04:08:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.957 0.022 1.044 0.023 2011-Dec-13 04:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-13 04:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-13 04:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2011-Dec-13 04:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.105 (still bad) 2011-Dec-13 04:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.110 (still bad) 2011-Dec-13 04:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-13 04:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.104 (still bad) 2011-Dec-13 04:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2011-Dec-13 04:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2011-Dec-13 04:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.105 (still bad) 2011-Dec-13 04:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2011-Dec-13 04:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.105 (still bad) 2011-Dec-13 04:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-13 04:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2011-Dec-13 04:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-13 04:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-13 04:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-13 04:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-13 04:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-13 04:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-13 04:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2011-Dec-13 04:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.110 (still bad) 2011-Dec-13 04:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.113 (still bad) 2011-Dec-13 04:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-13 04:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-13 04:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2011-Dec-13 04:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2011-Dec-13 04:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2011-Dec-13 04:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.133 (still bad) 2011-Dec-13 04:09:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-13 04:09:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 0.883 0.943 0.953 2011-Dec-13 04:09:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 1.003 1.128 0.943 2011-Dec-13 04:09:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 0.927 1.020 0.919 2011-Dec-13 04:09:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.957 0.020 1.042 0.020 2011-Dec-13 04:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2011-Dec-13 04:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2011-Dec-13 04:09:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 04:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-13 04:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.111 (still bad) 2011-Dec-13 04:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-13 04:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-13 04:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-13 04:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2011-Dec-13 04:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-13 04:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-13 04:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-13 04:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-13 04:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-13 04:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.107 (still bad) 2011-Dec-13 04:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.106 (still bad) 2011-Dec-13 04:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2011-Dec-13 04:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-13 04:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2011-Dec-13 04:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-13 04:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-13 04:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2011-Dec-13 04:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-13 04:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-13 04:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.109 (still bad) 2011-Dec-13 04:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-13 04:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-13 04:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2011-Dec-13 04:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2011-Dec-13 04:10:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2011-Dec-13 04:10:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 0.886 0.948 0.955 2011-Dec-13 04:10:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 1.002 1.107 0.926 2011-Dec-13 04:10:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 0.927 1.020 0.922 2011-Dec-13 04:10:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.957 0.019 1.044 0.020 2011-Dec-13 04:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.109 (still bad) 2011-Dec-13 04:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 04:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.107 (still bad) 2011-Dec-13 04:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2011-Dec-13 04:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.105 (still bad) 2011-Dec-13 04:10:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-13 04:10:49 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.131 (still bad) 2011-Dec-13 04:10:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-13 04:10:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-13 04:10:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2011-Dec-13 04:10:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.104 (still bad) 2011-Dec-13 04:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.106 (still bad) 2011-Dec-13 04:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.132 (still bad) 2011-Dec-13 04:11:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2011-Dec-13 04:11:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.104 (still bad) 2011-Dec-13 04:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2011-Dec-13 04:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-13 04:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-13 04:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.132 (still bad) 2011-Dec-13 04:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-13 04:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.105 (still bad) 2011-Dec-13 04:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.113 (still bad) 2011-Dec-13 04:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-13 04:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-13 04:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.134 (still bad) 2011-Dec-13 04:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-13 04:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2011-Dec-13 04:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.111 (still bad) 2011-Dec-13 04:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-13 04:11:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-13 04:11:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 0.886 0.948 0.956 2011-Dec-13 04:11:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 1.006 1.109 0.927 2011-Dec-13 04:11:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.865 0.929 1.022 0.921 2011-Dec-13 04:11:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.959 0.020 1.045 0.020 2011-Dec-13 04:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.136 (still bad) 2011-Dec-13 04:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.109 (still bad) 2011-Dec-13 04:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-13 04:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-13 04:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-13 04:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-13 04:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 04:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2011-Dec-13 04:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-13 04:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.114 (still bad) 2011-Dec-13 04:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-13 04:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-13 04:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2011-Dec-13 04:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-13 04:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.105 (still bad) 2011-Dec-13 04:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.112 (still bad) 2011-Dec-13 04:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.106 (still bad) 2011-Dec-13 04:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-13 04:12:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.139 (still bad) 2011-Dec-13 04:12:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-13 04:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-13 04:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.114 (still bad) 2011-Dec-13 04:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-13 04:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-13 04:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-13 04:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2011-Dec-13 04:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2011-Dec-13 04:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2011-Dec-13 04:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-13 04:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2011-Dec-13 04:12:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-13 04:12:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 0.895 0.949 0.961 2011-Dec-13 04:12:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 1.014 1.117 0.929 2011-Dec-13 04:12:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.867 0.931 1.028 0.924 2011-Dec-13 04:12:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.959 0.020 1.046 0.021 2011-Dec-13 04:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-13 04:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-13 04:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.111 (still bad) 2011-Dec-13 04:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-13 04:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-13 04:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-13 04:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-13 04:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.110 (still bad) 2011-Dec-13 04:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2011-Dec-13 04:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2011-Dec-13 04:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-13 04:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-13 04:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-13 04:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2011-Dec-13 04:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2011-Dec-13 04:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2011-Dec-13 04:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-13 04:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-13 04:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-13 04:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2011-Dec-13 04:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-13 04:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-13 04:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2011-Dec-13 04:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 04:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2011-Dec-13 04:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2011-Dec-13 04:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.112 (still bad) 2011-Dec-13 04:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-13 04:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.111 (still bad) 2011-Dec-13 04:13:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-13 04:13:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 0.895 0.943 0.958 2011-Dec-13 04:13:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.942 1.013 1.118 0.929 2011-Dec-13 04:13:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.867 0.932 1.022 0.923 2011-Dec-13 04:13:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.960 0.022 1.046 0.020 2011-Dec-13 04:13:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.111 (still bad) 2011-Dec-13 04:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.111 (still bad) 2011-Dec-13 04:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2011-Dec-13 04:13:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2011-Dec-13 04:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.110 (still bad) 2011-Dec-13 04:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-13 04:13:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.111 (still bad) 2011-Dec-13 04:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-13 04:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.112 (still bad) 2011-Dec-13 04:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2011-Dec-13 04:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.109 (still bad) 2011-Dec-13 04:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-13 04:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-13 04:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2011-Dec-13 04:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2011-Dec-13 04:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2011-Dec-13 04:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.137 (still bad) 2011-Dec-13 04:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-13 04:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2011-Dec-13 04:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.114 (still bad) 2011-Dec-13 04:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2011-Dec-13 04:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2011-Dec-13 04:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.137 (still bad) 2011-Dec-13 04:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-13 04:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-13 04:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-13 04:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-13 04:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-13 04:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.124 (still bad) 2011-Dec-13 04:14:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-13 04:14:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 0.890 0.945 0.960 2011-Dec-13 04:14:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.053 1.136 1.116 0.933 2011-Dec-13 04:14:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 0.929 1.020 0.919 2011-Dec-13 04:14:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.957 0.023 1.044 0.023 2011-Dec-13 04:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.147 (still bad) 2011-Dec-13 04:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.145 (still bad) 2011-Dec-13 04:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2011-Dec-13 04:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-13 04:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.115 (still bad) 2011-Dec-13 04:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-13 04:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2011-Dec-13 04:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2011-Dec-13 04:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-13 04:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-13 04:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2011-Dec-13 04:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-13 04:15:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-13 04:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-13 04:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-13 04:15:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-13 04:15:14 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.113 (still bad) 2011-Dec-13 04:15:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-13 04:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-13 04:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.106 (still bad) 2011-Dec-13 04:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.105 (still bad) 2011-Dec-13 04:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2011-Dec-13 04:15:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.112 (still bad) 2011-Dec-13 04:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2011-Dec-13 04:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2011-Dec-13 04:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.108 (still bad) 2011-Dec-13 04:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2011-Dec-13 04:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.108 (still bad) 2011-Dec-13 04:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2011-Dec-13 04:15:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-13 04:15:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 0.887 0.944 0.955 2011-Dec-13 04:15:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 1.008 1.107 0.925 2011-Dec-13 04:15:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 0.927 1.028 0.925 2011-Dec-13 04:15:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.961 0.027 1.047 0.027 2011-Dec-13 04:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-13 04:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.104 (still bad) 2011-Dec-13 04:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2011-Dec-13 04:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2011-Dec-13 04:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-13 04:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2011-Dec-13 04:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-13 04:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-13 04:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-13 04:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.129 (still bad) 2011-Dec-13 04:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2011-Dec-13 04:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2011-Dec-13 04:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2011-Dec-13 04:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.104 (still bad) 2011-Dec-13 04:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-13 04:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.131 (still bad) 2011-Dec-13 04:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-13 04:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-13 04:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-13 04:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2011-Dec-13 04:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-13 04:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.130 (still bad) 2011-Dec-13 04:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2011-Dec-13 04:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2011-Dec-13 04:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-13 04:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-13 04:16:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2011-Dec-13 04:16:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2011-Dec-13 04:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.110 (still bad) 2011-Dec-13 04:16:41 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.106 (still bad) 2011-Dec-13 04:16:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2011-Dec-13 04:16:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 0.889 0.943 0.957 2011-Dec-13 04:16:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 1.008 1.111 0.929 2011-Dec-13 04:16:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.867 0.931 1.023 0.922 2011-Dec-13 04:16:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.961 0.028 1.046 0.028 2011-Dec-13 04:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.106 (still bad) 2011-Dec-13 04:16:47 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.108 (still bad) 2011-Dec-13 04:16:49 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.129 (still bad) 2011-Dec-13 04:16:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-13 04:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-13 04:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2011-Dec-13 04:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-13 04:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-13 04:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.128 (still bad) 2011-Dec-13 04:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-13 04:17:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 04:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-13 04:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-13 04:17:09 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-13 04:17:09 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-13 04:17:09 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-13 04:17:09 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2011-Dec-13 04:17:09 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-13 04:17:09 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2011-Dec-13 04:17:09 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-13 04:17:09 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2011-Dec-13 04:17:09 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-13 04:17:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-13 04:17:09 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-13 04:17:09 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2011-Dec-13 04:17:09 COMMAND run_command_line: EXECUTING command 13: 'ENDIF' 2011-Dec-13 04:17:09 COMMAND run_command_line: EXECUTING command 16: 'IF LSTSLEW(AGES3193_p3_109) < 091941 THEN' 2011-Dec-13 04:17:09 LOG3 is_if_valid: Current source data: up 250.8 9.1 UP - - 119 1.9 2011-Dec-13 04:17:09 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_109) < 091941 2011-Dec-13 04:17:09 INFO5 is_if_valid: Condition parsed as: 9.3118046666666672 < 9.3280555555555544 2011-Dec-13 04:17:09 COMMAND run_command_line: EXECUTING command 17: 'FIXEDDRIFT az=249.50 alfaangle=-50.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_109 ra=95300.00 dec=211100.00' 2011-Dec-13 04:17:09 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-13 04:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-13 04:17:10 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-13 04:17:10 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 249.50 -50.5 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_109 95300.00 211100.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-13 04:17:10 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-13 04:17:10 LOG5 begin_task: Level: (2) ID = <10064> Status = 0 0 0 0 ok 2011-Dec-13 04:17:10 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_107' 2011-Dec-13 04:17:10 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-13 04:17:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_109} 2011-Dec-13 04:17:10 INFO3 fixed_driftmap: Sending telescope to Az = 249.50 and ZA = 8.46 2011-Dec-13 04:17:10 LOG3 track_source: Calling 'track_source AGES3193_p3_109 249.50 8.4629136531 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-13 04:17:10 START begin_task: Starting task 'sending tracking commands' 2011-Dec-13 04:17:10 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2011-Dec-13 04:17:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_109} INFO {Slewing to source 'AGES3193_p3_109' ...} 2011-Dec-13 04:17:10 INFO1 track_source: Starting to track AGES3193_p3_109 2011-Dec-13 04:17:10 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_109" 2011-Dec-13 04:17:10 LOG3 vw_send: To DATATAKING: set ra 249.50 2011-Dec-13 04:17:10 LOG3 vw_send: To DATATAKING: set dec 8.4629136531 2011-Dec-13 04:17:10 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-13 04:17:10 LOG3 vw_send: To DATATAKING: pnt tr 249.50 8.4629136531 -CF 2011-Dec-13 04:17:10 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 04:17:10 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-13 04:17:10 LOG5 finish_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2011-Dec-13 04:17:10 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-13 04:17:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 04:17:10 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-13 04:17:10 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2011-Dec-13 04:17:10 START begin_task: Starting task 'rotate ALFA to -50.5 degrees' 2011-Dec-13 04:17:10 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2011-Dec-13 04:17:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -50.5 degrees ...} 2011-Dec-13 04:17:10 INFO2 rotate_alfa: ALFA commanded to -50.5 degrees 2011-Dec-13 04:17:10 LOG3 sock_errsend: To ALFAMOTOR: POSITION -50.5 REPLY 2011-Dec-13 04:17:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-13 04:17:10 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-13 04:17:10 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2011-Dec-13 04:17:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_109" 2011-Dec-13 04:17:10 LOG4 got_cormsg: From DATATAKING: set ra 249.50 2011-Dec-13 04:17:10 LOG4 got_cormsg: From DATATAKING: set dec 8.4629136531 2011-Dec-13 04:17:10 LOG4 got_cormsg: From DATATAKING: vw% 249.50 2011-Dec-13 04:17:10 LOG4 got_cormsg: From DATATAKING: vw% 8.4629136531 2011-Dec-13 04:17:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 04:17:10 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-13 04:17:10 LOG4 got_cormsg: From DATATAKING: pnt tr 249.50 8.4629136531 -CF 2011-Dec-13 04:17:10 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 04:17:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-13 04:17:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 04:17:17 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-13 04:17:17 INFO3 alfa_motor: ALFA rotator in-position -50.50 degrees 2011-Dec-13 04:17:17 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-13 04:17:17 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2011-Dec-13 04:17:17 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-13 04:17:17 STOP finish_task: Finishing task 'rotate ALFA to -50.5 degrees' 2011-Dec-13 04:17:17 LOG5 finish_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2011-Dec-13 04:17:17 INFO2 finish_task: DONE finished configuration: rotating ALFA to -50.5 degrees 2011-Dec-13 04:17:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 04:17:17 STOP end_task: Finishing task 'rotate ALFA to -50.5 degrees' with status 'OK' 2011-Dec-13 04:17:17 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2011-Dec-13 04:17:17 START begin_task: Starting task 'waiting on telescope' 2011-Dec-13 04:17:17 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2011-Dec-13 04:17:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-13 04:17:17 LOG3 waittrk: Start waittrk 5 2011-Dec-13 04:17:17 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-13 04:17:17 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2011-Dec-13 04:17:22 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-13 04:17:22 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2011-Dec-13 04:17:22 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-13 04:17:22 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2011-Dec-13 04:19:26 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-13 04:19:26 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2011-Dec-13 04:19:26 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-13 04:19:26 INFO2 waittrk: Now tracking AGES3193_p3_109 2011-Dec-13 04:19:26 LOG4 waittrk: Current telescope position: Az = 248.98 ZA = 8.46 2011-Dec-13 04:19:26 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-13 04:19:26 LOG5 finish_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2011-Dec-13 04:19:26 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-13 04:19:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 04:19:26 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-13 04:19:26 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2011-Dec-13 04:19:26 START begin_task: Starting task 'selecting calibration type' 2011-Dec-13 04:19:26 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2011-Dec-13 04:19:26 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-13 04:19:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-13 04:19:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 04:19:26 START begin_task: Starting task 'waiting on setcal' 2011-Dec-13 04:19:26 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2011-Dec-13 04:19:26 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-13 04:19:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 04:19:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 04:19:28 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-13 04:19:28 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-13 04:19:28 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2011-Dec-13 04:19:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-13 04:19:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-13 04:19:28 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-13 04:19:28 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-13 04:19:28 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2011-Dec-13 04:19:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 04:19:28 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-13 04:19:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-13 04:19:28 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2011-Dec-13 04:19:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-13 04:19:28 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-13 04:19:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-13 04:19:28 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-13 04:19:28 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-13 04:19:28 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2011-Dec-13 04:19:28 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-13 04:19:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-13 04:19:28 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2011-Dec-13 04:19:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-13 04:19:28 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-13 04:19:28 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-13 04:19:28 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2011-Dec-13 04:19:28 LOG5 dopset_later: Calling 'dopset_later 34.087698326070168' 2011-Dec-13 04:19:28 INFO3 dopset_later: Setting Doppler correction for 04:20:01 (34.1 seconds from now) 2011-Dec-13 04:19:28 LOG5 antvel: Calling 'antvel 249.500000 8.462914 F Heliocentric 34.087698326070168' 2011-Dec-13 04:19:28 LOG2 antvel: Transforming current Az = 249.50 ZA = 8.46 to apparent RA = 09:53:41.5 Dec = +21:07:23.2 2011-Dec-13 04:19:28 LOG2 antvel: Parameters to Doppler: Heliocentric 30001 2011 347 0.0 2011-Dec-13 04:19:28 INFO5 antvel: Computed antenna velocity: -26.51826 km/s 2011-Dec-13 04:19:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-26.518255718100001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-13 04:19:28 INFO4 dopset_gen: New sky frequencies: 1381.365618 1381.365618 1381.365618 1381.365618 1381.365618 1381.365618 1381.365618 1381.365618 1381.365618 2011-Dec-13 04:19:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.365618 sky0=1381.365618 sky1=1381.365618 sky2=1381.365618 sky3=1381.365618 sky4=1381.365618 sky5=1381.365618 sky6=1381.365618 sky7=1381.365618 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-13 04:19:28 LOG2 dopset_gen: Result from 'sky2syn': 1631.365618 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-13 04:19:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631365618.0} 2011-Dec-13 04:19:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 04:19:28 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-13 04:19:28 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-13 04:19:28 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:30.4 Dec = +21:10:46.8 2011-Dec-13 04:19:28 LOG3 track_source: Calling 'track_source AGES3193_p3_109 095230.4 211046.8 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-13 04:19:28 START begin_task: Starting task 'sending tracking commands' 2011-Dec-13 04:19:28 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2011-Dec-13 04:19:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_109} INFO {Slewing to source 'AGES3193_p3_109' ...} 2011-Dec-13 04:19:28 INFO1 track_source: Starting to track AGES3193_p3_109 2011-Dec-13 04:19:28 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_109" 2011-Dec-13 04:19:28 LOG3 vw_send: To DATATAKING: set ra 095230.4 2011-Dec-13 04:19:28 LOG3 vw_send: To DATATAKING: set dec 211046.8 2011-Dec-13 04:19:28 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-13 04:19:28 LOG3 vw_send: To DATATAKING: pnt tr 095230.4 211046.8 -CJ 2011-Dec-13 04:19:28 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 04:19:28 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-13 04:19:28 LOG5 finish_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2011-Dec-13 04:19:28 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-13 04:19:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 04:19:28 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-13 04:19:28 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2011-Dec-13 04:19:28 START begin_task: Starting task 'waiting on telescope' 2011-Dec-13 04:19:28 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2011-Dec-13 04:19:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-13 04:19:28 LOG3 waittrk: Start waittrk 5 2011-Dec-13 04:19:28 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-13 04:19:28 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2011-Dec-13 04:19:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631365618.0} 2011-Dec-13 04:19:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 04:19:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 04:19:28 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_109" 2011-Dec-13 04:19:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 04:19:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 04:19:28 LOG4 got_cormsg: From DATATAKING: set ra 095230.4 2011-Dec-13 04:19:28 LOG4 got_cormsg: From DATATAKING: set dec 211046.8 2011-Dec-13 04:19:28 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-13 04:19:28 LOG4 got_cormsg: From DATATAKING: pnt tr 095230.4 211046.8 -CJ 2011-Dec-13 04:19:28 LOG4 got_cormsg: From DATATAKING: 095230.4 2011-Dec-13 04:19:28 LOG4 got_cormsg: From DATATAKING: vw% 211046.8 2011-Dec-13 04:19:28 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2011-Dec-13 04:19:28 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 04:19:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 04:19:33 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-13 04:19:33 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2011-Dec-13 04:19:33 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-13 04:19:33 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2011-Dec-13 04:19:35 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-13 04:19:35 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2011-Dec-13 04:19:35 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-13 04:19:35 INFO2 waittrk: Now tracking AGES3193_p3_109 2011-Dec-13 04:19:35 LOG4 waittrk: Current telescope position: Az = 248.97 ZA = 8.44 2011-Dec-13 04:19:35 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-13 04:19:35 LOG5 finish_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2011-Dec-13 04:19:35 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-13 04:19:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 04:19:36 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-13 04:19:36 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2011-Dec-13 04:19:36 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-13 04:19:36 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2011-Dec-13 04:19:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-13 04:19:36 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-13 04:19:36 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-13 04:19:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-13 04:19:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 04:19:36 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-13 04:19:36 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2011-Dec-13 04:19:36 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-13 04:19:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 04:19:38 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 04:19:38 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-13 04:19:38 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-13 04:19:38 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2011-Dec-13 04:19:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-13 04:19:39 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-13 04:19:39 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2011-Dec-13 04:19:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-13 04:19:39 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-13 04:19:39 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-13 04:19:39 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-13 04:19:39 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-13 04:19:39 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-13 04:19:39 LOG5 begin_task: Level: (5) ID = <10082> Status = 0 0 0 0 ok 2011-Dec-13 04:19:39 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 04:19:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-13 04:19:39 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 8 6 dB 2011-Dec-13 04:19:39 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 3 3 dB 2011-Dec-13 04:19:39 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 3 dB 2011-Dec-13 04:19:39 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2011-Dec-13 04:19:39 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-13 04:19:39 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-13 04:19:39 LOG5 end_task: Level: (5) ID = <10082> Status = 0 0 0 0 ok 2011-Dec-13 04:19:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.913 1.089 ALFA beam 1: 0.919 0.929 2011-Dec-13 04:19:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.902 0.995 ALFA beam 3: 1.082 0.898 2011-Dec-13 04:19:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.858 0.893 ALFA beam 5: 0.982 1.117 2011-Dec-13 04:19:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.932 0.017 ALFA beam 7: 1.010 0.020 2011-Dec-13 04:19:39 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-13 04:19:39 LOG5 finish_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2011-Dec-13 04:19:39 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-13 04:19:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 04:19:39 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-13 04:19:39 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2011-Dec-13 04:19:39 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-13 04:19:39 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2011-Dec-13 04:19:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-13 04:19:39 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-13 04:19:39 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-13 04:19:39 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-13 04:19:39 LOG5 begin_task: Level: (5) ID = <10084> Status = 0 0 0 0 ok 2011-Dec-13 04:19:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.017 < 0.75)! 2011-Dec-13 04:19:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.913 1.089 0.919 0.929 2011-Dec-13 04:19:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.902 0.995 1.082 0.898 2011-Dec-13 04:19:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.858 0.893 0.982 1.117 2011-Dec-13 04:19:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.017 1.010 0.020 2011-Dec-13 04:19:46 INFO3 from_mock: From MOCK: b0s0g0 rms:A 32.1 28.2 B 30.5 30.5 mn:A 0.0 0.0 B -0.3 -0.4 gn: 11 11 2011-Dec-13 04:19:46 INFO3 from_mock: From MOCK: b0s1g0 rms:A 25.0 23.8 B 25.2 26.6 mn:A 0.2 -0.4 B -0.4 0.1 gn: 9 9 2011-Dec-13 04:19:46 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.9 28.9 B 33.0 29.0 mn:A 0.5 0.6 B 0.1 -0.0 gn: 7 11 2011-Dec-13 04:19:46 INFO3 from_mock: From MOCK: b1s1g0 rms:A 26.2 24.1 B 24.7 24.7 mn:A -0.3 -0.3 B 0.6 0.1 gn: 6 7 2011-Dec-13 04:19:46 INFO3 from_mock: From MOCK: b2s0g0 rms:A 32.1 31.2 B 28.1 29.4 mn:A -0.0 -0.4 B 0.3 -0.1 gn: 11 11 2011-Dec-13 04:19:46 INFO3 from_mock: From MOCK: b2s1g0 rms:A 23.9 24.2 B 25.4 23.6 mn:A 0.2 -0.2 B 0.1 0.2 gn: 9 9 2011-Dec-13 04:19:46 INFO3 from_mock: From MOCK: b3s0g0 rms:A 29.3 29.1 B 31.2 27.8 mn:A 0.3 -0.3 B 0.0 -0.3 gn: 12 12 2011-Dec-13 04:19:46 INFO3 from_mock: From MOCK: b3s1g0 rms:A 25.1 24.5 B 24.4 25.5 mn:A -0.2 0.2 B 0.1 0.0 gn: 10 10 2011-Dec-13 04:19:46 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.7 29.7 B 31.7 31.9 mn:A -0.3 -0.3 B -0.4 0.0 gn: 13 12 2011-Dec-13 04:19:46 INFO3 from_mock: From MOCK: b4s1g0 rms:A 30.2 27.4 B 28.2 27.2 mn:A -0.1 -0.1 B -0.3 0.1 gn: 15 12 2011-Dec-13 04:19:46 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.7 28.6 B 31.0 31.0 mn:A 0.4 0.4 B -0.0 0.5 gn: 12 11 2011-Dec-13 04:19:46 INFO3 from_mock: From MOCK: b5s1g0 rms:A 27.3 27.1 B 26.2 26.0 mn:A -0.5 0.3 B -0.0 0.1 gn: 11 9 2011-Dec-13 04:19:46 INFO3 from_mock: From MOCK: b6s0g0 rms:A 30.0 27.4 B 14.9 15.4 mn:A -0.5 0.1 B 0.5 -0.4 gn: 12 31 2011-Dec-13 04:19:46 INFO3 from_mock: From MOCK: b6s1g0 rms:A 30.0 27.3 B 12.0 11.6 mn:A 0.6 0.6 B 0.1 0.1 gn: 12 31 2011-Dec-13 04:19:46 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-13 04:19:46 LOG5 end_task: Level: (5) ID = <10084> Status = 0 0 0 0 ok 2011-Dec-13 04:19:46 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-13 04:19:46 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-13 04:19:46 LOG5 finish_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2011-Dec-13 04:19:46 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-13 04:19:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 04:19:46 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-13 04:19:46 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2011-Dec-13 04:19:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-13 04:19:46 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-13 04:19:46 LOG5 finish_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2011-Dec-13 04:19:46 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-13 04:19:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 04:19:46 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-13 04:19:46 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2011-Dec-13 04:19:46 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ep 2011-Dec-13 04:19:46 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ep 2011-Dec-13 04:19:46 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ep 2011-Dec-13 04:19:46 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ep 2011-Dec-13 04:19:46 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-13 04:19:46 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-13 04:19:46 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2011-Dec-13 04:19:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-13 04:19:46 START begin_task: Starting task 'selecting calibration type' 2011-Dec-13 04:19:46 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2011-Dec-13 04:19:46 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-13 04:19:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-13 04:19:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 04:19:46 START begin_task: Starting task 'waiting on setcal' 2011-Dec-13 04:19:46 LOG5 begin_task: Level: (5) ID = <10087> Status = 0 0 0 0 ok 2011-Dec-13 04:19:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ep' 2011-Dec-13 04:19:46 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-13 04:19:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 04:19:47 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 04:19:47 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-13 04:19:47 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-13 04:19:47 LOG5 end_task: Level: (5) ID = <10087> Status = 0 0 0 0 ok 2011-Dec-13 04:19:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-13 04:19:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-13 04:19:47 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-13 04:19:47 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-13 04:19:47 LOG5 begin_task: Level: (5) ID = <10088> Status = 0 0 0 0 ok 2011-Dec-13 04:19:47 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 04:19:47 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-13 04:19:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-13 04:19:47 LOG5 end_task: Level: (5) ID = <10088> Status = 0 0 0 0 ok 2011-Dec-13 04:19:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-13 04:19:47 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-13 04:19:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-13 04:19:47 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-13 04:19:47 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-13 04:19:47 LOG5 begin_task: Level: (5) ID = <10089> Status = 0 0 0 0 ok 2011-Dec-13 04:19:47 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-13 04:19:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-13 04:19:47 LOG5 end_task: Level: (5) ID = <10089> Status = 0 0 0 0 ok 2011-Dec-13 04:19:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-13 04:19:47 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-13 04:19:47 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-13 04:19:47 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2011-Dec-13 04:19:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-13 04:19:47 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-13 04:19:47 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-13 04:19:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-13 04:19:47 LOG5 begin_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2011-Dec-13 04:19:47 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-13 04:19:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-13 04:19:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-13 04:19:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-13 04:19:47 LOG5 end_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2011-Dec-13 04:19:47 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-13 04:19:47 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-13 04:19:47 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2011-Dec-13 04:19:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-13 04:19:47 LOG5 log_alfabeam: Parameters: 9.8751111111111101 21.179666666666666 9.324426 2011.9505281453596 -50.500069 2011-Dec-13 04:19:47 LOG4 log_alfabeam: ALFABEAM 0 9.875111111111108 21.179666666666670 2011-Dec-13 04:19:47 LOG4 log_alfabeam: ALFABEAM 1 9.875848545978942 21.088486157922834 2011-Dec-13 04:19:47 LOG4 log_alfabeam: ALFABEAM 2 9.881982937079956 21.148879430353638 2011-Dec-13 04:19:47 LOG4 log_alfabeam: ALFABEAM 3 9.881201160105839 21.241040546910916 2011-Dec-13 04:19:47 LOG4 log_alfabeam: ALFABEAM 4 9.874299123966694 21.270909513955665 2011-Dec-13 04:19:47 LOG4 log_alfabeam: ALFABEAM 5 9.868234043166488 21.209192112312135 2011-Dec-13 04:19:47 LOG4 log_alfabeam: ALFABEAM 6 9.869001309135179 21.118926271352791 2011-Dec-13 04:19:47 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-13 04:19:47 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-13 04:19:47 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-13 04:19:47 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_109 2011-Dec-13 04:19:47 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-13 04:19:47 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-13 04:19:47 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-13 04:19:47 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-13 04:19:47 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-13 04:19:47 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-13 04:19:47 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-13 04:19:47 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-13 04:19:47 LOG3 take_mock_data: PSET configuration: patternid=134700054 2011-Dec-13 04:19:47 LOG3 take_mock_data: PSET configuration: scanid=134700055 2011-Dec-13 04:19:47 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-13 04:19:47 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-13 04:19:47 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-13 04:19:47 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456365618.0 2011-Dec-13 04:19:47 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306365618.0 2011-Dec-13 04:19:47 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-13 04:19:47 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-13 04:19:47 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_109:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=134700054:scanid=134700055:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456365618.0:topobfreqhz=1306365618.0:filetype=1 2011-Dec-13 04:19:47 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-13 04:19:47 LOG5 begin_task: Level: (5) ID = <10092> Status = 0 0 0 0 ok 2011-Dec-13 04:19:47 LOG4 from_mock: From MOCK: psetok 2011-Dec-13 04:19:47 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-13 04:19:47 LOG5 end_task: Level: (5) ID = <10092> Status = 0 0 0 0 ok 2011-Dec-13 04:19:47 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-13 04:19:47 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-13 04:19:47 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-13 04:19:47 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-13 04:19:47 LOG5 begin_task: Level: (5) ID = <10093> Status = 0 0 0 0 ok 2011-Dec-13 04:19:47 NOTE WAPPDATA-new_file: New FITS file: wapp.20111213.a2048.0001.fits 2011-Dec-13 04:19:47 LOG4 from_mock: From MOCK: starok 2011-Dec-13 04:19:47 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-13 04:19:47 LOG5 end_task: Level: (5) ID = <10093> Status = 0 0 0 0 ok 2011-Dec-13 04:19:47 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-13 04:19:47 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134700055 2011-Dec-13 04:19:48 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-13 04:19:48 LOG5 begin_task: Level: (5) ID = <10094> Status = 0 0 0 0 ok 2011-Dec-13 04:19:48 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111213.a2048.0001.fits} 2011-Dec-13 04:19:48 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-13 04:19:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 04:19:48 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-13 04:19:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-13 04:19:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29989.00 2011-Dec-13 04:19:49 INFO2 got_mock_message: Mock spectrometer start file number is 00300 2011-Dec-13 04:19:49 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-13 04:19:49 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-13 04:19:49 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-13 04:19:49 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-13 04:19:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-13 04:19:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-13 04:19:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-13 04:19:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-13 04:19:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-13 04:19:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-13 04:19:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-13 04:19:49 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-13 04:19:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 04:19:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 04:19:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 04:19:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 04:19:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 04:19:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 04:19:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 04:19:52 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:19:52.02 2011-Dec-13 04:19:52 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323764392.02 Tue Dec 13 04:19:52 2011 2011-Dec-13 04:19:52 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-13 04:19:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.365618 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 04:19:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.365618 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 04:19:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.365618 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 04:19:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.365618 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 04:19:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.365618 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 04:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.017 and 1.117 (still bad) 2011-Dec-13 04:19:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.365618 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 04:19:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.365618 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 04:19:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.365618 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 04:19:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.365618 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 04:19:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 04:19:58 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-13 04:19:58 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-13 04:19:58 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-13 04:19:58 LOG5 end_task: Level: (5) ID = <10094> Status = 0 0 0 0 ok 2011-Dec-13 04:19:58 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-13 04:19:58 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2011-Dec-13 04:19:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-13 04:19:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-13 04:19:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-13 04:19:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-13 04:19:58 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2011-Dec-13 04:19:58 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-13 04:19:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-13 04:19:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-13 04:19:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-13 04:19:58 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2011-Dec-13 04:19:58 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-13 04:19:58 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-13 04:19:58 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2011-Dec-13 04:19:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-13 04:19:58 LOG5 log_alfabeam: Parameters: 9.8751111111111101 21.179666666666666 9.327211 2011.9505284622405 -50.500069 2011-Dec-13 04:19:58 LOG4 log_alfabeam: ALFABEAM 0 9.875111111111110 21.179666666666662 2011-Dec-13 04:19:58 LOG4 log_alfabeam: ALFABEAM 1 9.875859302832788 21.088503734691479 2011-Dec-13 04:19:58 LOG4 log_alfabeam: ALFABEAM 2 9.881986614291163 21.149037919119522 2011-Dec-13 04:19:58 LOG4 log_alfabeam: ALFABEAM 3 9.881193738200759 21.241184805783995 2011-Dec-13 04:19:58 LOG4 log_alfabeam: ALFABEAM 4 9.874288015145314 21.270890464964648 2011-Dec-13 04:19:58 LOG4 log_alfabeam: ALFABEAM 5 9.868230512919418 21.209028105611932 2011-Dec-13 04:19:58 LOG4 log_alfabeam: ALFABEAM 6 9.869008543042691 21.118784617944151 2011-Dec-13 04:19:58 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-13 04:19:58 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-13 04:19:58 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-13 04:19:58 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_109 2011-Dec-13 04:19:58 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-13 04:19:58 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-13 04:19:58 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-13 04:19:58 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-13 04:19:58 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-13 04:19:58 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-13 04:19:58 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-13 04:19:58 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-13 04:19:58 LOG3 take_mock_data: PSET configuration: patternid=134700054 2011-Dec-13 04:19:58 LOG3 take_mock_data: PSET configuration: scanid=134700056 2011-Dec-13 04:19:58 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-13 04:19:58 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-13 04:19:58 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-13 04:19:58 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456365618.0 2011-Dec-13 04:19:58 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306365618.0 2011-Dec-13 04:19:58 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-13 04:19:58 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-13 04:19:58 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_109:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=134700054:scanid=134700056:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456365618.0:topobfreqhz=1306365618.0:filetype=1 2011-Dec-13 04:19:58 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-13 04:19:58 LOG5 begin_task: Level: (5) ID = <10097> Status = 0 0 0 0 ok 2011-Dec-13 04:19:58 LOG4 from_mock: From MOCK: psetok 2011-Dec-13 04:19:58 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-13 04:19:58 LOG5 end_task: Level: (5) ID = <10097> Status = 0 0 0 0 ok 2011-Dec-13 04:19:58 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-13 04:19:58 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-13 04:19:58 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-13 04:19:58 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-13 04:19:58 LOG5 begin_task: Level: (5) ID = <10098> Status = 0 0 0 0 ok 2011-Dec-13 04:19:58 LOG4 from_mock: From MOCK: starok 2011-Dec-13 04:19:58 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-13 04:19:58 LOG5 end_task: Level: (5) ID = <10098> Status = 0 0 0 0 ok 2011-Dec-13 04:19:58 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-13 04:19:58 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134700056 2011-Dec-13 04:19:58 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-13 04:19:58 LOG5 begin_task: Level: (5) ID = <10099> Status = 0 0 0 0 ok 2011-Dec-13 04:19:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 04:19:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-13 04:19:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29999.00 2011-Dec-13 04:19:59 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-13 04:19:59 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-13 04:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.532 (still bad) 2011-Dec-13 04:20:01 INFO2 got_mock_message: Mock spectrometer start file number is 00400 2011-Dec-13 04:20:01 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-13 04:20:01 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-13 04:20:01 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-13 04:20:01 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-13 04:20:01 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-13 04:20:01 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-13 04:20:01 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-13 04:20:01 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-13 04:20:01 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-13 04:20:01 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-13 04:20:01 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-13 04:20:01 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-13 04:20:01 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 04:20:01 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 04:20:01 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 04:20:01 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 04:20:01 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 04:20:01 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 04:20:01 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 04:20:04 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:20:04.01 2011-Dec-13 04:20:04 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323764404.01 Tue Dec 13 04:20:04 2011 2011-Dec-13 04:20:04 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-13 04:20:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.365618 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 04:20:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.365618 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 04:20:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.365618 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 04:20:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.365618 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 04:20:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.365618 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 04:20:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.365618 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 04:20:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.365618 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 04:20:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.365618 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 04:20:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.365618 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 04:20:04 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-13 04:20:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 04:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.138 (still bad) 2011-Dec-13 04:20:10 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-13 04:20:10 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-13 04:20:10 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-13 04:20:10 LOG5 end_task: Level: (5) ID = <10099> Status = 0 0 0 0 ok 2011-Dec-13 04:20:10 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-13 04:20:10 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2011-Dec-13 04:20:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-13 04:20:10 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-13 04:20:10 LOG5 finish_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2011-Dec-13 04:20:10 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-13 04:20:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 04:20:10 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-13 04:20:10 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2011-Dec-13 04:20:10 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-13 04:20:10 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 249.50 and ZA = 8.46 2011-Dec-13 04:20:10 LOG3 track_source: Calling 'track_source AGES3193_p3_109 249.50 8.4629136531 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-13 04:20:10 START begin_task: Starting task 'sending tracking commands' 2011-Dec-13 04:20:10 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2011-Dec-13 04:20:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_109} INFO {Slewing to source 'AGES3193_p3_109' ...} 2011-Dec-13 04:20:10 INFO1 track_source: Starting to track AGES3193_p3_109 2011-Dec-13 04:20:10 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_109" 2011-Dec-13 04:20:10 LOG3 vw_send: To DATATAKING: set ra 249.50 2011-Dec-13 04:20:10 LOG3 vw_send: To DATATAKING: set dec 8.4629136531 2011-Dec-13 04:20:10 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-13 04:20:10 LOG3 vw_send: To DATATAKING: pnt tr 249.50 8.4629136531 -CF 2011-Dec-13 04:20:10 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 04:20:10 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-13 04:20:10 LOG5 finish_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2011-Dec-13 04:20:10 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-13 04:20:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 04:20:10 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-13 04:20:10 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2011-Dec-13 04:20:10 LOG1 fixed_driftmap: Parameters: HA = -00:33:59.6 Start = 09:19:42.1 LST = 09:19:50.0 diff = -7.9 secs 2011-Dec-13 04:20:10 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2011-Dec-13 04:20:10 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-13 04:20:10 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-13 04:20:10 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-13 04:20:10 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-13 04:20:10 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-13 04:20:10 LOG5 begin_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2011-Dec-13 04:20:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-13 04:20:10 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-13 04:20:10 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-13 04:20:10 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-13 04:20:10 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-13 04:20:10 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_109 2011-Dec-13 04:20:10 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-13 04:20:10 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-13 04:20:10 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-13 04:20:10 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-13 04:20:10 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-13 04:20:10 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-13 04:20:10 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-13 04:20:10 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-13 04:20:10 LOG3 take_mock_data: PSET configuration: patternid=134700057 2011-Dec-13 04:20:10 LOG3 take_mock_data: PSET configuration: scanid=134700057 2011-Dec-13 04:20:10 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-13 04:20:10 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-13 04:20:10 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-13 04:20:10 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456365618.0 2011-Dec-13 04:20:10 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306365618.0 2011-Dec-13 04:20:10 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-13 04:20:10 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-13 04:20:10 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_109:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=134700057:scanid=134700057:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456365618.0:topobfreqhz=1306365618.0:filetype=1 2011-Dec-13 04:20:10 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-13 04:20:10 LOG5 begin_task: Level: (4) ID = <10102> Status = 0 0 0 0 ok 2011-Dec-13 04:20:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_109" 2011-Dec-13 04:20:10 LOG4 got_cormsg: From DATATAKING: set ra 249.50 2011-Dec-13 04:20:10 LOG4 got_cormsg: From DATATAKING: set dec 8.4629136531 2011-Dec-13 04:20:10 LOG4 from_mock: From MOCK: psetok 2011-Dec-13 04:20:10 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-13 04:20:10 LOG5 end_task: Level: (4) ID = <10102> Status = 0 0 0 0 ok 2011-Dec-13 04:20:10 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-13 04:20:10 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-13 04:20:10 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-13 04:20:10 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-13 04:20:10 LOG5 begin_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2011-Dec-13 04:20:10 LOG4 got_cormsg: From DATATAKING: vw% 249.50 2011-Dec-13 04:20:10 LOG4 got_cormsg: From DATATAKING: vw% 8.4629136531 2011-Dec-13 04:20:10 LOG4 from_mock: From MOCK: starok 2011-Dec-13 04:20:10 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-13 04:20:10 LOG5 end_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2011-Dec-13 04:20:10 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-13 04:20:10 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 134700057 2011-Dec-13 04:20:11 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-13 04:20:11 LOG5 begin_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2011-Dec-13 04:20:11 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 04:20:11 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-13 04:20:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 04:20:11 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-13 04:20:11 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-13 04:20:11 LOG4 got_cormsg: From DATATAKING: pnt tr 249.50 8.4629136531 -CF 2011-Dec-13 04:20:11 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 04:20:11 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-13 04:20:11 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 04:20:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-13 04:20:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30012.00 2011-Dec-13 04:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.138 (still bad) 2011-Dec-13 04:20:13 INFO2 got_mock_message: Mock spectrometer start file number is 00500 2011-Dec-13 04:20:13 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-13 04:20:13 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1199.9 s 2011-Dec-13 04:20:13 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-13 04:20:13 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-13 04:20:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-13 04:20:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-13 04:20:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-13 04:20:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-13 04:20:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-13 04:20:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-13 04:20:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-13 04:20:13 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-13 04:20:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 04:20:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 04:20:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 04:20:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 04:20:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 04:20:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 04:20:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 04:20:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.365618 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 04:20:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.365618 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 04:20:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.365618 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 04:20:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.365618 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 04:20:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.365618 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 04:20:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.365618 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 04:20:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.365618 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 04:20:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.365618 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 04:20:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.365618 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 04:20:14 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2011-Dec-13 04:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.148 (still bad) 2011-Dec-13 04:20:16 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:20:16.01 2011-Dec-13 04:20:16 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323764416.01 Tue Dec 13 04:20:16 2011 2011-Dec-13 04:20:16 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-13 04:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.136 (still bad) 2011-Dec-13 04:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2011-Dec-13 04:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-13 04:20:22 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2011-Dec-13 04:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2011-Dec-13 04:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.139 (still bad) 2011-Dec-13 04:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.151 (still bad) 2011-Dec-13 04:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2011-Dec-13 04:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.136 (still bad) 2011-Dec-13 04:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.140 (still bad) 2011-Dec-13 04:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2011-Dec-13 04:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 04:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.149 (still bad) 2011-Dec-13 04:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2011-Dec-13 04:20:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-13 04:20:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.908 1.089 0.928 0.932 2011-Dec-13 04:20:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.903 0.995 1.089 0.902 2011-Dec-13 04:20:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.858 0.892 0.982 1.136 2011-Dec-13 04:20:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 0.027 1.007 0.028 2011-Dec-13 04:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.136 (still bad) 2011-Dec-13 04:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2011-Dec-13 04:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.148 (still bad) 2011-Dec-13 04:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.137 (still bad) 2011-Dec-13 04:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2011-Dec-13 04:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2011-Dec-13 04:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-13 04:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2011-Dec-13 04:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.148 (still bad) 2011-Dec-13 04:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.137 (still bad) 2011-Dec-13 04:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2011-Dec-13 04:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2011-Dec-13 04:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-13 04:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-13 04:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.148 (still bad) 2011-Dec-13 04:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.137 (still bad) 2011-Dec-13 04:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2011-Dec-13 04:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.139 (still bad) 2011-Dec-13 04:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 04:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-13 04:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.149 (still bad) 2011-Dec-13 04:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.139 (still bad) 2011-Dec-13 04:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2011-Dec-13 04:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.139 (still bad) 2011-Dec-13 04:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2011-Dec-13 04:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-13 04:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.149 (still bad) 2011-Dec-13 04:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.137 (still bad) 2011-Dec-13 04:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2011-Dec-13 04:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.140 (still bad) 2011-Dec-13 04:21:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2011-Dec-13 04:21:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.908 1.090 0.921 0.929 2011-Dec-13 04:21:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.903 0.995 1.083 0.898 2011-Dec-13 04:21:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.856 0.891 0.982 1.137 2011-Dec-13 04:21:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 0.028 1.007 0.029 2011-Dec-13 04:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.139 (still bad) 2011-Dec-13 04:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.149 (still bad) 2011-Dec-13 04:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.139 (still bad) 2011-Dec-13 04:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2011-Dec-13 04:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.140 (still bad) 2011-Dec-13 04:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 04:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2011-Dec-13 04:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.150 (still bad) 2011-Dec-13 04:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-13 04:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2011-Dec-13 04:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.140 (still bad) 2011-Dec-13 04:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2011-Dec-13 04:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.138 (still bad) 2011-Dec-13 04:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.149 (still bad) 2011-Dec-13 04:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-13 04:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2011-Dec-13 04:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2011-Dec-13 04:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.135 (still bad) 2011-Dec-13 04:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.138 (still bad) 2011-Dec-13 04:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.139 (still bad) 2011-Dec-13 04:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.137 (still bad) 2011-Dec-13 04:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2011-Dec-13 04:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2011-Dec-13 04:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2011-Dec-13 04:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.137 (still bad) 2011-Dec-13 04:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.138 (still bad) 2011-Dec-13 04:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.136 (still bad) 2011-Dec-13 04:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2011-Dec-13 04:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2011-Dec-13 04:22:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-13 04:22:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.904 1.088 0.922 0.928 2011-Dec-13 04:22:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.902 0.996 1.083 0.898 2011-Dec-13 04:22:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.856 0.893 0.980 1.136 2011-Dec-13 04:22:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.020 1.005 0.021 2011-Dec-13 04:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.139 (still bad) 2011-Dec-13 04:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.142 (still bad) 2011-Dec-13 04:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.140 (still bad) 2011-Dec-13 04:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.140 (still bad) 2011-Dec-13 04:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2011-Dec-13 04:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.139 (still bad) 2011-Dec-13 04:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.140 (still bad) 2011-Dec-13 04:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.141 (still bad) 2011-Dec-13 04:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2011-Dec-13 04:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.139 (still bad) 2011-Dec-13 04:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2011-Dec-13 04:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2011-Dec-13 04:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2011-Dec-13 04:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.140 (still bad) 2011-Dec-13 04:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.137 (still bad) 2011-Dec-13 04:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-13 04:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.137 (still bad) 2011-Dec-13 04:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.137 (still bad) 2011-Dec-13 04:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.138 (still bad) 2011-Dec-13 04:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.139 (still bad) 2011-Dec-13 04:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-13 04:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.136 (still bad) 2011-Dec-13 04:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-13 04:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-13 04:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2011-Dec-13 04:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-13 04:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-13 04:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.135 (still bad) 2011-Dec-13 04:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2011-Dec-13 04:23:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-13 04:23:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.907 1.091 0.923 0.928 2011-Dec-13 04:23:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.903 0.995 1.081 0.899 2011-Dec-13 04:23:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.856 0.893 0.982 1.134 2011-Dec-13 04:23:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.024 1.006 0.025 2011-Dec-13 04:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.135 (still bad) 2011-Dec-13 04:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-13 04:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-13 04:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.136 (still bad) 2011-Dec-13 04:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-13 04:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-13 04:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.138 (still bad) 2011-Dec-13 04:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-13 04:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-13 04:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.139 (still bad) 2011-Dec-13 04:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-13 04:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-13 04:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.033 and 1.149 (still bad) 2011-Dec-13 04:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2011-Dec-13 04:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2011-Dec-13 04:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 04:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2011-Dec-13 04:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2011-Dec-13 04:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.033 and 1.148 (still bad) 2011-Dec-13 04:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.137 (still bad) 2011-Dec-13 04:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.138 (still bad) 2011-Dec-13 04:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.138 (still bad) 2011-Dec-13 04:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2011-Dec-13 04:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-13 04:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.034 and 1.147 (still bad) 2011-Dec-13 04:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2011-Dec-13 04:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2011-Dec-13 04:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2011-Dec-13 04:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-13 04:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.138 (still bad) 2011-Dec-13 04:24:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.032 < 0.75)! 2011-Dec-13 04:24:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.916 1.104 0.934 0.939 2011-Dec-13 04:24:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.914 1.007 1.101 0.910 2011-Dec-13 04:24:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.863 0.900 0.999 1.149 2011-Dec-13 04:24:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.937 0.032 1.020 0.032 2011-Dec-13 04:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2011-Dec-13 04:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2011-Dec-13 04:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.139 (still bad) 2011-Dec-13 04:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-13 04:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-13 04:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.034 and 1.149 (still bad) 2011-Dec-13 04:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-13 04:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-13 04:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.140 (still bad) 2011-Dec-13 04:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2011-Dec-13 04:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-13 04:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.150 (still bad) 2011-Dec-13 04:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.140 (still bad) 2011-Dec-13 04:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.141 (still bad) 2011-Dec-13 04:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2011-Dec-13 04:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.145 (still bad) 2011-Dec-13 04:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.147 (still bad) 2011-Dec-13 04:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.160 (still bad) 2011-Dec-13 04:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.149 (still bad) 2011-Dec-13 04:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.148 (still bad) 2011-Dec-13 04:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.149 (still bad) 2011-Dec-13 04:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.144 (still bad) 2011-Dec-13 04:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.143 (still bad) 2011-Dec-13 04:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.153 (still bad) 2011-Dec-13 04:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2011-Dec-13 04:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-13 04:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2011-Dec-13 04:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-13 04:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 04:25:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.032 < 0.75)! 2011-Dec-13 04:25:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.912 1.100 0.925 0.930 2011-Dec-13 04:25:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.910 0.999 1.094 0.903 2011-Dec-13 04:25:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.860 0.894 0.988 1.138 2011-Dec-13 04:25:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 0.032 1.010 0.032 2011-Dec-13 04:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.138 (still bad) 2011-Dec-13 04:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.139 (still bad) 2011-Dec-13 04:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.138 (still bad) 2011-Dec-13 04:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-13 04:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.137 (still bad) 2011-Dec-13 04:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.138 (still bad) 2011-Dec-13 04:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-13 04:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.138 (still bad) 2011-Dec-13 04:26:08 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.139 (still bad) 2011-Dec-13 04:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-13 04:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2011-Dec-13 04:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.142 (still bad) 2011-Dec-13 04:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.141 (still bad) 2011-Dec-13 04:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.144 (still bad) 2011-Dec-13 04:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.145 (still bad) 2011-Dec-13 04:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.144 (still bad) 2011-Dec-13 04:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.146 (still bad) 2011-Dec-13 04:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.148 (still bad) 2011-Dec-13 04:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-13 04:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.144 (still bad) 2011-Dec-13 04:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.145 (still bad) 2011-Dec-13 04:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-13 04:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.142 (still bad) 2011-Dec-13 04:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.143 (still bad) 2011-Dec-13 04:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.141 (still bad) 2011-Dec-13 04:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.141 (still bad) 2011-Dec-13 04:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.142 (still bad) 2011-Dec-13 04:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.141 (still bad) 2011-Dec-13 04:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.142 (still bad) 2011-Dec-13 04:26:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.031 < 0.75)! 2011-Dec-13 04:26:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.910 1.100 0.924 0.932 2011-Dec-13 04:26:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.911 1.000 1.092 0.902 2011-Dec-13 04:26:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.862 0.894 0.990 1.142 2011-Dec-13 04:26:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.031 1.012 0.032 2011-Dec-13 04:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.140 (still bad) 2011-Dec-13 04:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.141 (still bad) 2011-Dec-13 04:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.139 (still bad) 2011-Dec-13 04:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.138 (still bad) 2011-Dec-13 04:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.138 (still bad) 2011-Dec-13 04:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.140 (still bad) 2011-Dec-13 04:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.139 (still bad) 2011-Dec-13 04:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.034 and 1.140 (still bad) 2011-Dec-13 04:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-13 04:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.139 (still bad) 2011-Dec-13 04:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.139 (still bad) 2011-Dec-13 04:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.141 (still bad) 2011-Dec-13 04:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-13 04:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.034 and 1.139 (still bad) 2011-Dec-13 04:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.140 (still bad) 2011-Dec-13 04:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.138 (still bad) 2011-Dec-13 04:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.149 (still bad) 2011-Dec-13 04:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.140 (still bad) 2011-Dec-13 04:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-13 04:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.141 (still bad) 2011-Dec-13 04:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.139 (still bad) 2011-Dec-13 04:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.139 (still bad) 2011-Dec-13 04:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.149 (still bad) 2011-Dec-13 04:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.140 (still bad) 2011-Dec-13 04:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.139 (still bad) 2011-Dec-13 04:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.140 (still bad) 2011-Dec-13 04:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.138 (still bad) 2011-Dec-13 04:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.140 (still bad) 2011-Dec-13 04:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.152 (still bad) 2011-Dec-13 04:27:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2011-Dec-13 04:27:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.910 1.100 0.921 0.931 2011-Dec-13 04:27:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.910 1.002 1.090 0.901 2011-Dec-13 04:27:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.862 0.895 0.986 1.140 2011-Dec-13 04:27:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.028 1.010 0.029 2011-Dec-13 04:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.139 (still bad) 2011-Dec-13 04:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.033 and 1.141 (still bad) 2011-Dec-13 04:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.140 (still bad) 2011-Dec-13 04:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2011-Dec-13 04:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.151 (still bad) 2011-Dec-13 04:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.140 (still bad) 2011-Dec-13 04:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.140 (still bad) 2011-Dec-13 04:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.143 (still bad) 2011-Dec-13 04:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.140 (still bad) 2011-Dec-13 04:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2011-Dec-13 04:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.151 (still bad) 2011-Dec-13 04:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.141 (still bad) 2011-Dec-13 04:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.140 (still bad) 2011-Dec-13 04:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.143 (still bad) 2011-Dec-13 04:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.140 (still bad) 2011-Dec-13 04:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.142 (still bad) 2011-Dec-13 04:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.034 and 1.150 (still bad) 2011-Dec-13 04:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.142 (still bad) 2011-Dec-13 04:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.141 (still bad) 2011-Dec-13 04:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.033 and 1.142 (still bad) 2011-Dec-13 04:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.141 (still bad) 2011-Dec-13 04:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.142 (still bad) 2011-Dec-13 04:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.151 (still bad) 2011-Dec-13 04:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.141 (still bad) 2011-Dec-13 04:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.141 (still bad) 2011-Dec-13 04:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.143 (still bad) 2011-Dec-13 04:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-13 04:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.141 (still bad) 2011-Dec-13 04:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.152 (still bad) 2011-Dec-13 04:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-13 04:28:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-13 04:28:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.910 1.098 0.923 0.933 2011-Dec-13 04:28:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.908 0.999 1.089 0.900 2011-Dec-13 04:28:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.861 0.894 0.986 1.140 2011-Dec-13 04:28:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.027 1.014 0.027 2011-Dec-13 04:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.144 (still bad) 2011-Dec-13 04:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.140 (still bad) 2011-Dec-13 04:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.142 (still bad) 2011-Dec-13 04:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.153 (still bad) 2011-Dec-13 04:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-13 04:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.144 (still bad) 2011-Dec-13 04:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2011-Dec-13 04:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-13 04:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.143 (still bad) 2011-Dec-13 04:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.144 (still bad) 2011-Dec-13 04:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2011-Dec-13 04:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-13 04:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.143 (still bad) 2011-Dec-13 04:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-13 04:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.142 (still bad) 2011-Dec-13 04:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.145 (still bad) 2011-Dec-13 04:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.141 (still bad) 2011-Dec-13 04:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2011-Dec-13 04:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.142 (still bad) 2011-Dec-13 04:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2011-Dec-13 04:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.151 (still bad) 2011-Dec-13 04:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.140 (still bad) 2011-Dec-13 04:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-13 04:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2011-Dec-13 04:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.140 (still bad) 2011-Dec-13 04:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.141 (still bad) 2011-Dec-13 04:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.151 (still bad) 2011-Dec-13 04:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.141 (still bad) 2011-Dec-13 04:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.139 (still bad) 2011-Dec-13 04:29:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2011-Dec-13 04:29:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.908 1.098 0.921 0.932 2011-Dec-13 04:29:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.911 1.003 1.093 0.905 2011-Dec-13 04:29:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.862 0.894 0.986 1.141 2011-Dec-13 04:29:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.028 1.010 0.028 2011-Dec-13 04:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.140 (still bad) 2011-Dec-13 04:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2011-Dec-13 04:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.139 (still bad) 2011-Dec-13 04:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.143 (still bad) 2011-Dec-13 04:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.140 (still bad) 2011-Dec-13 04:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.141 (still bad) 2011-Dec-13 04:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.141 (still bad) 2011-Dec-13 04:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2011-Dec-13 04:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.142 (still bad) 2011-Dec-13 04:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.144 (still bad) 2011-Dec-13 04:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.142 (still bad) 2011-Dec-13 04:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.142 (still bad) 2011-Dec-13 04:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-13 04:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.141 (still bad) 2011-Dec-13 04:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.142 (still bad) 2011-Dec-13 04:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2011-Dec-13 04:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.141 (still bad) 2011-Dec-13 04:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.141 (still bad) 2011-Dec-13 04:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.143 (still bad) 2011-Dec-13 04:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2011-Dec-13 04:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.034 and 1.142 (still bad) 2011-Dec-13 04:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2011-Dec-13 04:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.142 (still bad) 2011-Dec-13 04:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.142 (still bad) 2011-Dec-13 04:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.141 (still bad) 2011-Dec-13 04:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.141 (still bad) 2011-Dec-13 04:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.146 (still bad) 2011-Dec-13 04:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.142 (still bad) 2011-Dec-13 04:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.141 (still bad) 2011-Dec-13 04:30:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.030 < 0.75)! 2011-Dec-13 04:30:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.911 1.101 0.923 0.937 2011-Dec-13 04:30:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.913 1.002 1.091 0.903 2011-Dec-13 04:30:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.863 0.897 0.988 1.143 2011-Dec-13 04:30:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.030 1.013 0.031 2011-Dec-13 04:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.141 (still bad) 2011-Dec-13 04:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-13 04:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.034 and 1.145 (still bad) 2011-Dec-13 04:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.140 (still bad) 2011-Dec-13 04:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.142 (still bad) 2011-Dec-13 04:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.144 (still bad) 2011-Dec-13 04:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.140 (still bad) 2011-Dec-13 04:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2011-Dec-13 04:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.034 and 1.143 (still bad) 2011-Dec-13 04:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2011-Dec-13 04:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.141 (still bad) 2011-Dec-13 04:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.143 (still bad) 2011-Dec-13 04:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.141 (still bad) 2011-Dec-13 04:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2011-Dec-13 04:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.146 (still bad) 2011-Dec-13 04:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.143 (still bad) 2011-Dec-13 04:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.142 (still bad) 2011-Dec-13 04:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.144 (still bad) 2011-Dec-13 04:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.142 (still bad) 2011-Dec-13 04:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.142 (still bad) 2011-Dec-13 04:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.034 and 1.144 (still bad) 2011-Dec-13 04:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2011-Dec-13 04:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.142 (still bad) 2011-Dec-13 04:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.143 (still bad) 2011-Dec-13 04:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.141 (still bad) 2011-Dec-13 04:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.143 (still bad) 2011-Dec-13 04:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.034 and 1.146 (still bad) 2011-Dec-13 04:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.143 (still bad) 2011-Dec-13 04:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.140 (still bad) 2011-Dec-13 04:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.144 (still bad) 2011-Dec-13 04:31:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-13 04:31:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.910 1.100 0.920 0.933 2011-Dec-13 04:31:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.908 1.000 1.088 0.902 2011-Dec-13 04:31:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.863 0.896 0.985 1.142 2011-Dec-13 04:31:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.022 1.014 0.023 2011-Dec-13 04:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.144 (still bad) 2011-Dec-13 04:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.146 (still bad) 2011-Dec-13 04:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.142 (still bad) 2011-Dec-13 04:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-13 04:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.142 (still bad) 2011-Dec-13 04:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-13 04:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.142 (still bad) 2011-Dec-13 04:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.144 (still bad) 2011-Dec-13 04:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.141 (still bad) 2011-Dec-13 04:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.143 (still bad) 2011-Dec-13 04:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.144 (still bad) 2011-Dec-13 04:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-13 04:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.154 (still bad) 2011-Dec-13 04:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.144 (still bad) 2011-Dec-13 04:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.142 (still bad) 2011-Dec-13 04:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2011-Dec-13 04:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.143 (still bad) 2011-Dec-13 04:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-13 04:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.033 and 1.152 (still bad) 2011-Dec-13 04:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.144 (still bad) 2011-Dec-13 04:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2011-Dec-13 04:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.144 (still bad) 2011-Dec-13 04:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.141 (still bad) 2011-Dec-13 04:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.142 (still bad) 2011-Dec-13 04:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.033 and 1.152 (still bad) 2011-Dec-13 04:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.142 (still bad) 2011-Dec-13 04:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.143 (still bad) 2011-Dec-13 04:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.145 (still bad) 2011-Dec-13 04:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-13 04:32:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-13 04:32:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.909 1.099 0.925 0.935 2011-Dec-13 04:32:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.908 1.002 1.089 0.902 2011-Dec-13 04:32:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.872 0.906 0.989 1.141 2011-Dec-13 04:32:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.020 1.012 0.022 2011-Dec-13 04:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.151 (still bad) 2011-Dec-13 04:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-13 04:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.141 (still bad) 2011-Dec-13 04:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.145 (still bad) 2011-Dec-13 04:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2011-Dec-13 04:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.143 (still bad) 2011-Dec-13 04:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.153 (still bad) 2011-Dec-13 04:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.142 (still bad) 2011-Dec-13 04:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.143 (still bad) 2011-Dec-13 04:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.147 (still bad) 2011-Dec-13 04:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.145 (still bad) 2011-Dec-13 04:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.145 (still bad) 2011-Dec-13 04:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.155 (still bad) 2011-Dec-13 04:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.147 (still bad) 2011-Dec-13 04:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.144 (still bad) 2011-Dec-13 04:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.148 (still bad) 2011-Dec-13 04:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.144 (still bad) 2011-Dec-13 04:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2011-Dec-13 04:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.154 (still bad) 2011-Dec-13 04:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.145 (still bad) 2011-Dec-13 04:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2011-Dec-13 04:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.145 (still bad) 2011-Dec-13 04:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.142 (still bad) 2011-Dec-13 04:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.144 (still bad) 2011-Dec-13 04:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.153 (still bad) 2011-Dec-13 04:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.145 (still bad) 2011-Dec-13 04:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.144 (still bad) 2011-Dec-13 04:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.146 (still bad) 2011-Dec-13 04:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.144 (still bad) 2011-Dec-13 04:34:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-13 04:34:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.908 1.100 0.932 0.942 2011-Dec-13 04:34:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.908 1.000 1.088 0.903 2011-Dec-13 04:34:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.865 0.897 0.988 1.144 2011-Dec-13 04:34:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.022 1.011 0.023 2011-Dec-13 04:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.152 (still bad) 2011-Dec-13 04:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.144 (still bad) 2011-Dec-13 04:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.145 (still bad) 2011-Dec-13 04:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.146 (still bad) 2011-Dec-13 04:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.144 (still bad) 2011-Dec-13 04:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.143 (still bad) 2011-Dec-13 04:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.148 (still bad) 2011-Dec-13 04:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.145 (still bad) 2011-Dec-13 04:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2011-Dec-13 04:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.145 (still bad) 2011-Dec-13 04:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.143 (still bad) 2011-Dec-13 04:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.144 (still bad) 2011-Dec-13 04:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.148 (still bad) 2011-Dec-13 04:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2011-Dec-13 04:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.143 (still bad) 2011-Dec-13 04:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.146 (still bad) 2011-Dec-13 04:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.143 (still bad) 2011-Dec-13 04:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.144 (still bad) 2011-Dec-13 04:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.148 (still bad) 2011-Dec-13 04:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.143 (still bad) 2011-Dec-13 04:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.142 (still bad) 2011-Dec-13 04:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.143 (still bad) 2011-Dec-13 04:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.143 (still bad) 2011-Dec-13 04:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.144 (still bad) 2011-Dec-13 04:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.147 (still bad) 2011-Dec-13 04:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2011-Dec-13 04:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.143 (still bad) 2011-Dec-13 04:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.146 (still bad) 2011-Dec-13 04:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.142 (still bad) 2011-Dec-13 04:35:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-13 04:35:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.910 1.102 0.926 0.936 2011-Dec-13 04:35:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.910 1.001 1.091 0.904 2011-Dec-13 04:35:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 0.899 0.989 1.143 2011-Dec-13 04:35:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.020 1.010 0.021 2011-Dec-13 04:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.148 (still bad) 2011-Dec-13 04:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.143 (still bad) 2011-Dec-13 04:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.143 (still bad) 2011-Dec-13 04:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.145 (still bad) 2011-Dec-13 04:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.143 (still bad) 2011-Dec-13 04:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.143 (still bad) 2011-Dec-13 04:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.149 (still bad) 2011-Dec-13 04:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.143 (still bad) 2011-Dec-13 04:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.144 (still bad) 2011-Dec-13 04:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.145 (still bad) 2011-Dec-13 04:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.144 (still bad) 2011-Dec-13 04:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.145 (still bad) 2011-Dec-13 04:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.149 (still bad) 2011-Dec-13 04:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.143 (still bad) 2011-Dec-13 04:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.143 (still bad) 2011-Dec-13 04:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.145 (still bad) 2011-Dec-13 04:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.144 (still bad) 2011-Dec-13 04:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.143 (still bad) 2011-Dec-13 04:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.147 (still bad) 2011-Dec-13 04:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-13 04:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-13 04:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-13 04:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-13 04:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.148 (still bad) 2011-Dec-13 04:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.143 (still bad) 2011-Dec-13 04:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.143 (still bad) 2011-Dec-13 04:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.146 (still bad) 2011-Dec-13 04:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.143 (still bad) 2011-Dec-13 04:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.143 (still bad) 2011-Dec-13 04:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.148 (still bad) 2011-Dec-13 04:36:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-13 04:36:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.910 1.102 0.934 0.941 2011-Dec-13 04:36:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.907 1.000 1.092 0.902 2011-Dec-13 04:36:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 0.900 0.988 1.143 2011-Dec-13 04:36:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.025 1.013 0.026 2011-Dec-13 04:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.144 (still bad) 2011-Dec-13 04:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.145 (still bad) 2011-Dec-13 04:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-13 04:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-13 04:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.149 (still bad) 2011-Dec-13 04:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.146 (still bad) 2011-Dec-13 04:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.145 (still bad) 2011-Dec-13 04:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.145 (still bad) 2011-Dec-13 04:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.143 (still bad) 2011-Dec-13 04:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.144 (still bad) 2011-Dec-13 04:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.148 (still bad) 2011-Dec-13 04:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.144 (still bad) 2011-Dec-13 04:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.142 (still bad) 2011-Dec-13 04:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.146 (still bad) 2011-Dec-13 04:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.142 (still bad) 2011-Dec-13 04:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.141 (still bad) 2011-Dec-13 04:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.146 (still bad) 2011-Dec-13 04:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.144 (still bad) 2011-Dec-13 04:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.143 (still bad) 2011-Dec-13 04:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.144 (still bad) 2011-Dec-13 04:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.143 (still bad) 2011-Dec-13 04:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.144 (still bad) 2011-Dec-13 04:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.146 (still bad) 2011-Dec-13 04:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2011-Dec-13 04:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2011-Dec-13 04:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.149 (still bad) 2011-Dec-13 04:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2011-Dec-13 04:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2011-Dec-13 04:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.149 (still bad) 2011-Dec-13 04:37:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.029 < 0.75)! 2011-Dec-13 04:37:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.908 1.102 0.929 0.938 2011-Dec-13 04:37:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 1.005 1.100 0.908 2011-Dec-13 04:37:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.867 0.899 0.993 1.147 2011-Dec-13 04:37:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.029 1.013 0.029 2011-Dec-13 04:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.144 (still bad) 2011-Dec-13 04:37:08 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 04:37:08.296 (seconds: 16628.296)!} 2011-Dec-13 04:37:08 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 04:37:08.296 (seconds: 16628.296)! 2011-Dec-13 04:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.145 (still bad) 2011-Dec-13 04:37:09 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 16627.0 to 16628.0! 2011-Dec-13 04:37:10 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (16627.0 - 16629.0)! 2011-Dec-13 04:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.142 (still bad) 2011-Dec-13 04:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.142 (still bad) 2011-Dec-13 04:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2011-Dec-13 04:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2011-Dec-13 04:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2011-Dec-13 04:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2011-Dec-13 04:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2011-Dec-13 04:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2011-Dec-13 04:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.153 (still bad) 2011-Dec-13 04:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.142 (still bad) 2011-Dec-13 04:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.141 (still bad) 2011-Dec-13 04:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.145 (still bad) 2011-Dec-13 04:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.142 (still bad) 2011-Dec-13 04:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.143 (still bad) 2011-Dec-13 04:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.153 (still bad) 2011-Dec-13 04:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.144 (still bad) 2011-Dec-13 04:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.152 (still bad) 2011-Dec-13 04:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.165 (still bad) 2011-Dec-13 04:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.167 (still bad) 2011-Dec-13 04:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.164 (still bad) 2011-Dec-13 04:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.181 (still bad) 2011-Dec-13 04:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2011-Dec-13 04:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2011-Dec-13 04:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2011-Dec-13 04:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2011-Dec-13 04:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.168 (still bad) 2011-Dec-13 04:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.206 (still bad) 2011-Dec-13 04:38:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.029 < 0.75)! 2011-Dec-13 04:38:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.985 1.200 0.926 0.935 2011-Dec-13 04:38:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.909 1.000 1.094 0.905 2011-Dec-13 04:38:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.863 0.900 0.986 1.145 2011-Dec-13 04:38:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.934 0.029 1.018 0.029 2011-Dec-13 04:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.202 (still bad) 2011-Dec-13 04:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.197 (still bad) 2011-Dec-13 04:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.184 (still bad) 2011-Dec-13 04:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.164 (still bad) 2011-Dec-13 04:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.162 (still bad) 2011-Dec-13 04:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.156 (still bad) 2011-Dec-13 04:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.173 (still bad) 2011-Dec-13 04:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.203 (still bad) 2011-Dec-13 04:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.235 (still bad) 2011-Dec-13 04:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.279 (still bad) 2011-Dec-13 04:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.324 (still bad) 2011-Dec-13 04:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.342 (still bad) 2011-Dec-13 04:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.358 (still bad) 2011-Dec-13 04:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.356 (still bad) 2011-Dec-13 04:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.331 (still bad) 2011-Dec-13 04:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.302 (still bad) 2011-Dec-13 04:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.273 (still bad) 2011-Dec-13 04:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.226 (still bad) 2011-Dec-13 04:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.193 (still bad) 2011-Dec-13 04:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.176 (still bad) 2011-Dec-13 04:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.165 (still bad) 2011-Dec-13 04:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.162 (still bad) 2011-Dec-13 04:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.175 (still bad) 2011-Dec-13 04:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.167 (still bad) 2011-Dec-13 04:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.167 (still bad) 2011-Dec-13 04:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.169 (still bad) 2011-Dec-13 04:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.161 (still bad) 2011-Dec-13 04:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.158 (still bad) 2011-Dec-13 04:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.163 (still bad) 2011-Dec-13 04:39:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-13 04:39:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.912 1.106 0.925 0.932 2011-Dec-13 04:39:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.911 0.999 1.090 0.902 2011-Dec-13 04:39:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.864 0.897 0.988 1.148 2011-Dec-13 04:39:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.927 0.027 1.011 0.027 2011-Dec-13 04:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2011-Dec-13 04:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2011-Dec-13 04:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.148 (still bad) 2011-Dec-13 04:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.158 (still bad) 2011-Dec-13 04:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.147 (still bad) 2011-Dec-13 04:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.147 (still bad) 2011-Dec-13 04:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.149 (still bad) 2011-Dec-13 04:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.145 (still bad) 2011-Dec-13 04:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.147 (still bad) 2011-Dec-13 04:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.155 (still bad) 2011-Dec-13 04:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.143 (still bad) 2011-Dec-13 04:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.142 (still bad) 2011-Dec-13 04:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.145 (still bad) 2011-Dec-13 04:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.143 (still bad) 2011-Dec-13 04:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.144 (still bad) 2011-Dec-13 04:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.154 (still bad) 2011-Dec-13 04:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.142 (still bad) 2011-Dec-13 04:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.143 (still bad) 2011-Dec-13 04:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.145 (still bad) 2011-Dec-13 04:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.143 (still bad) 2011-Dec-13 04:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.143 (still bad) 2011-Dec-13 04:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.153 (still bad) 2011-Dec-13 04:39:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.143 (still bad) 2011-Dec-13 04:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.143 (still bad) 2011-Dec-13 04:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.146 (still bad) 2011-Dec-13 04:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.144 (still bad) 2011-Dec-13 04:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.146 (still bad) 2011-Dec-13 04:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.154 (still bad) 2011-Dec-13 04:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2011-Dec-13 04:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2011-Dec-13 04:40:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-13 04:40:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.907 1.099 0.926 0.936 2011-Dec-13 04:40:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.909 1.001 1.091 0.904 2011-Dec-13 04:40:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.867 0.900 0.989 1.147 2011-Dec-13 04:40:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.027 1.013 0.028 2011-Dec-13 04:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2011-Dec-13 04:40:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 04:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2011-Dec-13 04:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2011-Dec-13 04:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2011-Dec-13 04:40:17 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-13 04:40:17 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-13 04:40:17 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-13 04:40:17 LOG5 end_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2011-Dec-13 04:40:17 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-13 04:40:17 LOG5 end_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2011-Dec-13 04:40:17 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-13 04:40:17 LOG5 finish_task: Level: (2) ID = <10064> Status = 0 0 0 0 ok 2011-Dec-13 04:40:17 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-13 04:40:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-13 04:40:17 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-13 04:40:17 LOG5 end_task: Level: (2) ID = <10064> Status = 0 0 0 0 ok 2011-Dec-13 04:40:17 COMMAND run_command_line: EXECUTING command 20: 'ENDIF' 2011-Dec-13 04:40:17 COMMAND run_command_line: EXECUTING command 23: 'IF LSTSLEW(AGES3193_p3_119) < 094241 THEN' 2011-Dec-13 04:40:17 LOG3 is_if_valid: Current source data: up 231.4 4.1 UP - - 96 1.8 2011-Dec-13 04:40:17 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_119) < 094241 2011-Dec-13 04:40:17 INFO5 is_if_valid: Condition parsed as: 9.6967489999999987 < 9.7113888888888873 2011-Dec-13 04:40:17 COMMAND run_command_line: EXECUTING command 24: 'FIXEDDRIFT az=225.34 alfaangle=-22.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_119 ra=95300.00 dec=205600.00' 2011-Dec-13 04:40:17 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-13 04:40:18 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-13 04:40:18 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 225.34 -22.7 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_119 95300.00 205600.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-13 04:40:18 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-13 04:40:18 LOG5 begin_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2011-Dec-13 04:40:18 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_109' 2011-Dec-13 04:40:18 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-13 04:40:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_119} 2011-Dec-13 04:40:18 INFO3 fixed_driftmap: Sending telescope to Az = 225.34 and ZA = 3.61 2011-Dec-13 04:40:18 LOG3 track_source: Calling 'track_source AGES3193_p3_119 225.34 3.6130558044 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-13 04:40:18 START begin_task: Starting task 'sending tracking commands' 2011-Dec-13 04:40:18 LOG5 begin_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2011-Dec-13 04:40:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_119} INFO {Slewing to source 'AGES3193_p3_119' ...} 2011-Dec-13 04:40:18 INFO1 track_source: Starting to track AGES3193_p3_119 2011-Dec-13 04:40:18 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_119" 2011-Dec-13 04:40:18 LOG3 vw_send: To DATATAKING: set ra 225.34 2011-Dec-13 04:40:18 LOG3 vw_send: To DATATAKING: set dec 3.6130558044 2011-Dec-13 04:40:18 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-13 04:40:18 LOG3 vw_send: To DATATAKING: pnt tr 225.34 3.6130558044 -CF 2011-Dec-13 04:40:18 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 04:40:18 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-13 04:40:18 LOG5 finish_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2011-Dec-13 04:40:18 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-13 04:40:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 04:40:18 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-13 04:40:18 LOG5 end_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2011-Dec-13 04:40:18 START begin_task: Starting task 'rotate ALFA to -22.7 degrees' 2011-Dec-13 04:40:18 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2011-Dec-13 04:40:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -22.7 degrees ...} 2011-Dec-13 04:40:18 INFO2 rotate_alfa: ALFA commanded to -22.7 degrees 2011-Dec-13 04:40:18 LOG3 sock_errsend: To ALFAMOTOR: POSITION -22.7 REPLY 2011-Dec-13 04:40:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-13 04:40:18 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-13 04:40:18 LOG5 begin_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2011-Dec-13 04:40:18 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_119" 2011-Dec-13 04:40:18 LOG4 got_cormsg: From DATATAKING: set ra 225.34 2011-Dec-13 04:40:18 LOG4 got_cormsg: From DATATAKING: set dec 3.6130558044 2011-Dec-13 04:40:18 LOG4 got_cormsg: From DATATAKING: vw% 225.34 2011-Dec-13 04:40:18 LOG4 got_cormsg: From DATATAKING: vw% 3.6130558044 2011-Dec-13 04:40:18 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 04:40:18 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-13 04:40:18 LOG4 got_cormsg: From DATATAKING: pnt tr 225.34 3.6130558044 -CF 2011-Dec-13 04:40:18 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 04:40:18 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-13 04:40:18 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 04:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2011-Dec-13 04:40:35 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-13 04:40:35 INFO3 alfa_motor: ALFA rotator in-position -22.70 degrees 2011-Dec-13 04:40:35 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-13 04:40:35 LOG5 end_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2011-Dec-13 04:40:35 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-13 04:40:35 STOP finish_task: Finishing task 'rotate ALFA to -22.7 degrees' 2011-Dec-13 04:40:35 LOG5 finish_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2011-Dec-13 04:40:35 INFO2 finish_task: DONE finished configuration: rotating ALFA to -22.7 degrees 2011-Dec-13 04:40:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 04:40:35 STOP end_task: Finishing task 'rotate ALFA to -22.7 degrees' with status 'OK' 2011-Dec-13 04:40:35 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2011-Dec-13 04:40:35 START begin_task: Starting task 'waiting on telescope' 2011-Dec-13 04:40:35 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2011-Dec-13 04:40:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-13 04:40:35 LOG3 waittrk: Start waittrk 5 2011-Dec-13 04:40:35 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-13 04:40:35 LOG5 begin_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2011-Dec-13 04:40:40 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-13 04:40:40 LOG5 end_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2011-Dec-13 04:40:40 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-13 04:40:40 LOG5 begin_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2011-Dec-13 04:42:24 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-13 04:42:24 LOG5 end_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2011-Dec-13 04:42:24 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-13 04:42:24 INFO2 waittrk: Now tracking AGES3193_p3_119 2011-Dec-13 04:42:24 LOG4 waittrk: Current telescope position: Az = 224.64 ZA = 3.62 2011-Dec-13 04:42:24 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-13 04:42:24 LOG5 finish_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2011-Dec-13 04:42:24 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-13 04:42:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 04:42:24 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-13 04:42:24 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2011-Dec-13 04:42:24 START begin_task: Starting task 'selecting calibration type' 2011-Dec-13 04:42:24 LOG5 begin_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2011-Dec-13 04:42:24 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-13 04:42:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-13 04:42:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 04:42:24 START begin_task: Starting task 'waiting on setcal' 2011-Dec-13 04:42:24 LOG5 begin_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2011-Dec-13 04:42:24 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-13 04:42:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 04:42:26 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 04:42:26 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-13 04:42:26 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-13 04:42:26 LOG5 end_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2011-Dec-13 04:42:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-13 04:42:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-13 04:42:26 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-13 04:42:26 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-13 04:42:26 LOG5 begin_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2011-Dec-13 04:42:26 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 04:42:26 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-13 04:42:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-13 04:42:26 LOG5 end_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2011-Dec-13 04:42:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-13 04:42:26 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-13 04:42:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-13 04:42:26 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-13 04:42:26 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-13 04:42:26 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2011-Dec-13 04:42:26 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-13 04:42:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-13 04:42:26 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2011-Dec-13 04:42:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-13 04:42:26 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-13 04:42:26 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-13 04:42:26 LOG5 end_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2011-Dec-13 04:42:26 LOG5 dopset_later: Calling 'dopset_later 31.930953983551941' 2011-Dec-13 04:42:26 INFO3 dopset_later: Setting Doppler correction for 04:42:57 (31.9 seconds from now) 2011-Dec-13 04:42:26 LOG5 antvel: Calling 'antvel 225.340000 3.613056 F Heliocentric 31.930953983551941' 2011-Dec-13 04:42:26 LOG2 antvel: Transforming current Az = 225.34 ZA = 3.61 to apparent RA = 09:53:41.5 Dec = +20:52:23.3 2011-Dec-13 04:42:26 LOG2 antvel: Parameters to Doppler: Heliocentric 31377 2011 347 0.0 2011-Dec-13 04:42:26 INFO5 antvel: Computed antenna velocity: -26.50916 km/s 2011-Dec-13 04:42:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-26.509157564199999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-13 04:42:26 INFO4 dopset_gen: New sky frequencies: 1381.365576 1381.365576 1381.365576 1381.365576 1381.365576 1381.365576 1381.365576 1381.365576 1381.365576 2011-Dec-13 04:42:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.365576 sky0=1381.365576 sky1=1381.365576 sky2=1381.365576 sky3=1381.365576 sky4=1381.365576 sky5=1381.365576 sky6=1381.365576 sky7=1381.365576 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-13 04:42:26 LOG2 dopset_gen: Result from 'sky2syn': 1631.365576 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-13 04:42:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631365576.0} 2011-Dec-13 04:42:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 04:42:26 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-13 04:42:26 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-13 04:42:26 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:32.6 Dec = +20:55:46.9 2011-Dec-13 04:42:26 LOG3 track_source: Calling 'track_source AGES3193_p3_119 095232.6 205546.9 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-13 04:42:26 START begin_task: Starting task 'sending tracking commands' 2011-Dec-13 04:42:26 LOG5 begin_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2011-Dec-13 04:42:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_119} INFO {Slewing to source 'AGES3193_p3_119' ...} 2011-Dec-13 04:42:26 INFO1 track_source: Starting to track AGES3193_p3_119 2011-Dec-13 04:42:26 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_119" 2011-Dec-13 04:42:26 LOG3 vw_send: To DATATAKING: set ra 095232.6 2011-Dec-13 04:42:26 LOG3 vw_send: To DATATAKING: set dec 205546.9 2011-Dec-13 04:42:26 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-13 04:42:26 LOG3 vw_send: To DATATAKING: pnt tr 095232.6 205546.9 -CJ 2011-Dec-13 04:42:26 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 04:42:26 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-13 04:42:26 LOG5 finish_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2011-Dec-13 04:42:26 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-13 04:42:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 04:42:26 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-13 04:42:26 LOG5 end_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2011-Dec-13 04:42:26 START begin_task: Starting task 'waiting on telescope' 2011-Dec-13 04:42:26 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2011-Dec-13 04:42:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-13 04:42:26 LOG3 waittrk: Start waittrk 5 2011-Dec-13 04:42:26 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-13 04:42:26 LOG5 begin_task: Level: (4) ID = <10118> Status = 0 0 0 0 ok 2011-Dec-13 04:42:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631365576.0} 2011-Dec-13 04:42:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 04:42:26 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 04:42:26 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_119" 2011-Dec-13 04:42:26 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 04:42:26 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 04:42:26 LOG4 got_cormsg: From DATATAKING: set ra 095232.6 2011-Dec-13 04:42:26 LOG4 got_cormsg: From DATATAKING: set dec 205546.9 2011-Dec-13 04:42:26 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-13 04:42:26 LOG4 got_cormsg: From DATATAKING: pnt tr 095232.6 205546.9 -CJ 2011-Dec-13 04:42:26 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 04:42:26 LOG4 got_cormsg: From DATATAKING: 095232.6 2011-Dec-13 04:42:26 LOG4 got_cormsg: From DATATAKING: vw% 205546.9 2011-Dec-13 04:42:26 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2011-Dec-13 04:42:31 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-13 04:42:31 LOG5 end_task: Level: (4) ID = <10118> Status = 0 0 0 0 ok 2011-Dec-13 04:42:31 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-13 04:42:31 LOG5 begin_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2011-Dec-13 04:42:37 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-13 04:42:37 LOG5 end_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2011-Dec-13 04:42:37 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-13 04:42:38 INFO2 waittrk: Now tracking AGES3193_p3_119 2011-Dec-13 04:42:38 LOG4 waittrk: Current telescope position: Az = 224.31 ZA = 3.59 2011-Dec-13 04:42:38 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-13 04:42:38 LOG5 finish_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2011-Dec-13 04:42:38 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-13 04:42:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 04:42:38 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-13 04:42:38 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2011-Dec-13 04:42:38 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-13 04:42:38 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2011-Dec-13 04:42:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-13 04:42:38 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-13 04:42:38 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-13 04:42:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-13 04:42:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 04:42:38 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-13 04:42:38 LOG5 begin_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2011-Dec-13 04:42:38 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-13 04:42:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 04:42:41 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 04:42:41 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-13 04:42:41 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-13 04:42:41 LOG5 end_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2011-Dec-13 04:42:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-13 04:42:41 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-13 04:42:41 LOG5 begin_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2011-Dec-13 04:42:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-13 04:42:41 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-13 04:42:41 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-13 04:42:41 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-13 04:42:41 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-13 04:42:41 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-13 04:42:41 LOG5 begin_task: Level: (5) ID = <10123> Status = 0 0 0 0 ok 2011-Dec-13 04:42:41 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 04:42:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-13 04:42:41 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 8 6 dB 2011-Dec-13 04:42:41 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 3 dB 2011-Dec-13 04:42:41 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 3 dB 2011-Dec-13 04:42:41 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2011-Dec-13 04:42:41 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-13 04:42:41 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-13 04:42:41 LOG5 end_task: Level: (5) ID = <10123> Status = 0 0 0 0 ok 2011-Dec-13 04:42:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.116 1.084 ALFA beam 1: 0.892 0.925 2011-Dec-13 04:42:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.900 0.985 ALFA beam 3: 1.081 0.899 2011-Dec-13 04:42:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.863 1.113 ALFA beam 5: 0.960 1.109 2011-Dec-13 04:42:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.106 0.014 ALFA beam 7: 0.962 0.014 2011-Dec-13 04:42:41 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-13 04:42:41 LOG5 finish_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2011-Dec-13 04:42:41 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-13 04:42:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 04:42:41 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-13 04:42:41 LOG5 end_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2011-Dec-13 04:42:41 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-13 04:42:41 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2011-Dec-13 04:42:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-13 04:42:41 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-13 04:42:41 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-13 04:42:41 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-13 04:42:41 LOG5 begin_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2011-Dec-13 04:42:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-13 04:42:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.116 1.084 0.892 0.925 2011-Dec-13 04:42:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.900 0.985 1.081 0.899 2011-Dec-13 04:42:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.863 1.113 0.960 1.109 2011-Dec-13 04:42:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.106 0.014 0.962 0.014 2011-Dec-13 04:42:48 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.7 27.9 B 30.4 30.5 mn:A -0.0 -0.0 B -0.4 -0.4 gn: 11 11 2011-Dec-13 04:42:48 INFO3 from_mock: From MOCK: b0s1g0 rms:A 29.6 28.4 B 29.1 30.8 mn:A 0.1 -0.5 B -0.5 0.1 gn: 11 11 2011-Dec-13 04:42:48 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.5 28.5 B 33.1 29.0 mn:A 0.6 0.7 B 0.2 -0.1 gn: 7 11 2011-Dec-13 04:42:48 INFO3 from_mock: From MOCK: b1s1g0 rms:A 30.4 28.0 B 28.8 28.8 mn:A -0.1 -0.2 B 0.6 0.2 gn: 8 9 2011-Dec-13 04:42:48 INFO3 from_mock: From MOCK: b2s0g0 rms:A 32.0 31.1 B 28.1 29.4 mn:A -0.1 -0.3 B 0.3 0.0 gn: 11 11 2011-Dec-13 04:42:48 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.8 30.0 B 33.2 30.9 mn:A 0.2 -0.3 B 0.1 0.2 gn: 11 12 2011-Dec-13 04:42:48 INFO3 from_mock: From MOCK: b3s0g0 rms:A 29.3 29.1 B 31.4 28.0 mn:A 0.4 -0.3 B 0.0 -0.3 gn: 12 12 2011-Dec-13 04:42:48 INFO3 from_mock: From MOCK: b3s1g0 rms:A 31.2 30.5 B 29.9 31.1 mn:A -0.3 0.3 B 0.1 0.1 gn: 12 12 2011-Dec-13 04:42:48 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.9 29.9 B 28.1 28.2 mn:A -0.3 -0.3 B -0.4 -0.0 gn: 13 11 2011-Dec-13 04:42:48 INFO3 from_mock: From MOCK: b4s1g0 rms:A 30.7 27.8 B 31.0 29.9 mn:A -0.1 -0.1 B -0.4 0.1 gn: 15 13 2011-Dec-13 04:42:48 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.5 28.5 B 30.7 30.7 mn:A 0.4 0.4 B -0.1 0.5 gn: 12 11 2011-Dec-13 04:42:48 INFO3 from_mock: From MOCK: b5s1g0 rms:A 29.9 29.7 B 31.3 31.0 mn:A -0.5 0.2 B -0.1 0.2 gn: 12 11 2011-Dec-13 04:42:48 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.8 30.0 B 15.2 15.7 mn:A -0.4 0.1 B 0.4 -0.5 gn: 13 31 2011-Dec-13 04:42:48 INFO3 from_mock: From MOCK: b6s1g0 rms:A 30.8 28.0 B 12.2 11.8 mn:A 0.6 0.7 B -0.0 0.2 gn: 13 31 2011-Dec-13 04:42:48 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-13 04:42:48 LOG5 end_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2011-Dec-13 04:42:48 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-13 04:42:48 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-13 04:42:48 LOG5 finish_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2011-Dec-13 04:42:48 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-13 04:42:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 04:42:48 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-13 04:42:48 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2011-Dec-13 04:42:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-13 04:42:48 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-13 04:42:48 LOG5 finish_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2011-Dec-13 04:42:48 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-13 04:42:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 04:42:48 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-13 04:42:48 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2011-Dec-13 04:42:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ep 2011-Dec-13 04:42:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ep 2011-Dec-13 04:42:49 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ep 2011-Dec-13 04:42:49 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ep 2011-Dec-13 04:42:49 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-13 04:42:49 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-13 04:42:49 LOG5 begin_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2011-Dec-13 04:42:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-13 04:42:49 START begin_task: Starting task 'selecting calibration type' 2011-Dec-13 04:42:49 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2011-Dec-13 04:42:49 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-13 04:42:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-13 04:42:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 04:42:49 START begin_task: Starting task 'waiting on setcal' 2011-Dec-13 04:42:49 LOG5 begin_task: Level: (5) ID = <10128> Status = 0 0 0 0 ok 2011-Dec-13 04:42:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ep' 2011-Dec-13 04:42:49 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-13 04:42:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 04:42:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 04:42:49 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-13 04:42:49 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-13 04:42:49 LOG5 end_task: Level: (5) ID = <10128> Status = 0 0 0 0 ok 2011-Dec-13 04:42:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-13 04:42:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-13 04:42:49 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-13 04:42:49 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-13 04:42:49 LOG5 begin_task: Level: (5) ID = <10129> Status = 0 0 0 0 ok 2011-Dec-13 04:42:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 04:42:49 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-13 04:42:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-13 04:42:49 LOG5 end_task: Level: (5) ID = <10129> Status = 0 0 0 0 ok 2011-Dec-13 04:42:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-13 04:42:49 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-13 04:42:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-13 04:42:49 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-13 04:42:49 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-13 04:42:49 LOG5 begin_task: Level: (5) ID = <10130> Status = 0 0 0 0 ok 2011-Dec-13 04:42:49 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-13 04:42:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-13 04:42:49 LOG5 end_task: Level: (5) ID = <10130> Status = 0 0 0 0 ok 2011-Dec-13 04:42:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-13 04:42:49 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-13 04:42:49 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-13 04:42:49 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2011-Dec-13 04:42:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-13 04:42:49 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-13 04:42:49 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-13 04:42:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-13 04:42:49 LOG5 begin_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2011-Dec-13 04:42:49 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-13 04:42:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-13 04:42:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-13 04:42:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-13 04:42:49 LOG5 end_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2011-Dec-13 04:42:49 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-13 04:42:49 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-13 04:42:49 LOG5 begin_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2011-Dec-13 04:42:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-13 04:42:49 LOG5 log_alfabeam: Parameters: 9.8757222222222243 20.929694444444443 9.709366 2011.9505719382971 -22.700003 2011-Dec-13 04:42:49 LOG4 log_alfabeam: ALFABEAM 0 9.875722222222212 20.929694444444454 2011-Dec-13 04:42:49 LOG4 log_alfabeam: ALFABEAM 1 9.875991842998946 20.832975079489529 2011-Dec-13 04:42:49 LOG4 log_alfabeam: ALFABEAM 2 9.882040927264153 20.897315573568633 2011-Dec-13 04:42:49 LOG4 log_alfabeam: ALFABEAM 3 9.881690578080949 20.995605873291286 2011-Dec-13 04:42:49 LOG4 log_alfabeam: ALFABEAM 4 9.875244129052934 21.027245066160152 2011-Dec-13 04:42:49 LOG4 log_alfabeam: ALFABEAM 5 9.869397534557400 20.959229115713946 2011-Dec-13 04:42:49 LOG4 log_alfabeam: ALFABEAM 6 9.869791884621801 20.863219256418155 2011-Dec-13 04:42:49 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-13 04:42:49 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-13 04:42:49 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-13 04:42:49 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_119 2011-Dec-13 04:42:49 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-13 04:42:49 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-13 04:42:49 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-13 04:42:49 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-13 04:42:49 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-13 04:42:49 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-13 04:42:49 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-13 04:42:49 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-13 04:42:49 LOG3 take_mock_data: PSET configuration: patternid=134700057 2011-Dec-13 04:42:49 LOG3 take_mock_data: PSET configuration: scanid=134700058 2011-Dec-13 04:42:49 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-13 04:42:49 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-13 04:42:49 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-13 04:42:49 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456365576.0 2011-Dec-13 04:42:49 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306365576.0 2011-Dec-13 04:42:49 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-13 04:42:49 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-13 04:42:49 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_119:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=134700057:scanid=134700058:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456365576.0:topobfreqhz=1306365576.0:filetype=1 2011-Dec-13 04:42:49 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-13 04:42:49 LOG5 begin_task: Level: (5) ID = <10133> Status = 0 0 0 0 ok 2011-Dec-13 04:42:49 LOG4 from_mock: From MOCK: psetok 2011-Dec-13 04:42:49 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-13 04:42:49 LOG5 end_task: Level: (5) ID = <10133> Status = 0 0 0 0 ok 2011-Dec-13 04:42:50 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-13 04:42:50 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-13 04:42:50 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-13 04:42:50 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-13 04:42:50 LOG5 begin_task: Level: (5) ID = <10134> Status = 0 0 0 0 ok 2011-Dec-13 04:42:50 NOTE WAPPDATA-new_file: New FITS file: wapp.20111213.a2048.0002.fits 2011-Dec-13 04:42:50 LOG4 from_mock: From MOCK: starok 2011-Dec-13 04:42:50 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-13 04:42:50 LOG5 end_task: Level: (5) ID = <10134> Status = 0 0 0 0 ok 2011-Dec-13 04:42:50 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-13 04:42:50 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134700058 2011-Dec-13 04:42:50 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-13 04:42:50 LOG5 begin_task: Level: (5) ID = <10135> Status = 0 0 0 0 ok 2011-Dec-13 04:42:50 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111213.a2048.0002.fits} 2011-Dec-13 04:42:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 04:42:50 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-13 04:42:50 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-13 04:42:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-13 04:42:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31371.00 2011-Dec-13 04:42:52 INFO2 got_mock_message: Mock spectrometer start file number is 00600 2011-Dec-13 04:42:52 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-13 04:42:52 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-13 04:42:52 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-13 04:42:52 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-13 04:42:52 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-13 04:42:52 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-13 04:42:52 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-13 04:42:52 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-13 04:42:52 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-13 04:42:52 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-13 04:42:52 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-13 04:42:52 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-13 04:42:52 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 04:42:52 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 04:42:52 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 04:42:52 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 04:42:52 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 04:42:52 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 04:42:52 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 04:42:55 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:42:55.01 2011-Dec-13 04:42:55 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323765775.01 Tue Dec 13 04:42:55 2011 2011-Dec-13 04:42:55 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-13 04:42:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.365576 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 04:42:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.365576 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 04:42:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.365576 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 04:42:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.365576 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 04:42:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.365576 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 04:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.583 (still bad) 2011-Dec-13 04:42:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.365576 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 04:42:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.365576 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 04:42:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.365576 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 04:42:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.365576 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 04:42:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 04:43:01 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-13 04:43:01 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-13 04:43:01 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-13 04:43:01 LOG5 end_task: Level: (5) ID = <10135> Status = 0 0 0 0 ok 2011-Dec-13 04:43:01 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-13 04:43:01 LOG5 end_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2011-Dec-13 04:43:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-13 04:43:01 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-13 04:43:01 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-13 04:43:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-13 04:43:01 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2011-Dec-13 04:43:01 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-13 04:43:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-13 04:43:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-13 04:43:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-13 04:43:01 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2011-Dec-13 04:43:01 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-13 04:43:01 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-13 04:43:01 LOG5 begin_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2011-Dec-13 04:43:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-13 04:43:01 LOG5 log_alfabeam: Parameters: 9.8757222222222243 20.929694444444443 9.712430 2011.950572286866 -22.700003 2011-Dec-13 04:43:01 LOG4 log_alfabeam: ALFABEAM 0 9.875722222222212 20.929694444444443 2011-Dec-13 04:43:01 LOG4 log_alfabeam: ALFABEAM 1 9.876051962780007 20.833015985657013 2011-Dec-13 04:43:01 LOG4 log_alfabeam: ALFABEAM 2 9.882061110007117 20.898087771242878 2011-Dec-13 04:43:01 LOG4 log_alfabeam: ALFABEAM 3 9.881648870429210 20.996340698939118 2011-Dec-13 04:43:01 LOG4 log_alfabeam: ALFABEAM 4 9.875181610072501 21.027185253796571 2011-Dec-13 04:43:01 LOG4 log_alfabeam: ALFABEAM 5 9.869379159009062 20.958432143357467 2011-Dec-13 04:43:01 LOG4 log_alfabeam: ALFABEAM 6 9.869834224610667 20.862484724117397 2011-Dec-13 04:43:01 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-13 04:43:01 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-13 04:43:01 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-13 04:43:01 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_119 2011-Dec-13 04:43:01 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-13 04:43:01 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-13 04:43:01 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-13 04:43:01 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-13 04:43:01 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-13 04:43:01 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-13 04:43:01 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-13 04:43:01 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-13 04:43:01 LOG3 take_mock_data: PSET configuration: patternid=134700057 2011-Dec-13 04:43:01 LOG3 take_mock_data: PSET configuration: scanid=134700059 2011-Dec-13 04:43:01 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-13 04:43:01 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-13 04:43:01 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-13 04:43:01 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456365576.0 2011-Dec-13 04:43:01 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306365576.0 2011-Dec-13 04:43:01 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-13 04:43:01 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-13 04:43:01 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_119:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=134700057:scanid=134700059:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456365576.0:topobfreqhz=1306365576.0:filetype=1 2011-Dec-13 04:43:01 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-13 04:43:01 LOG5 begin_task: Level: (5) ID = <10138> Status = 0 0 0 0 ok 2011-Dec-13 04:43:01 LOG4 from_mock: From MOCK: psetok 2011-Dec-13 04:43:01 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-13 04:43:01 LOG5 end_task: Level: (5) ID = <10138> Status = 0 0 0 0 ok 2011-Dec-13 04:43:01 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-13 04:43:01 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-13 04:43:01 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-13 04:43:01 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-13 04:43:01 LOG5 begin_task: Level: (5) ID = <10139> Status = 0 0 0 0 ok 2011-Dec-13 04:43:01 LOG4 from_mock: From MOCK: starok 2011-Dec-13 04:43:01 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-13 04:43:01 LOG5 end_task: Level: (5) ID = <10139> Status = 0 0 0 0 ok 2011-Dec-13 04:43:01 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-13 04:43:01 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134700059 2011-Dec-13 04:43:01 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-13 04:43:01 LOG5 begin_task: Level: (5) ID = <10140> Status = 0 0 0 0 ok 2011-Dec-13 04:43:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 04:43:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-13 04:43:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31382.00 2011-Dec-13 04:43:02 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-13 04:43:02 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-13 04:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.583 (still bad) 2011-Dec-13 04:43:04 INFO2 got_mock_message: Mock spectrometer start file number is 00700 2011-Dec-13 04:43:04 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-13 04:43:04 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-13 04:43:04 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-13 04:43:04 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-13 04:43:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-13 04:43:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-13 04:43:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-13 04:43:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-13 04:43:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-13 04:43:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-13 04:43:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-13 04:43:04 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-13 04:43:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 04:43:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 04:43:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 04:43:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 04:43:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 04:43:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 04:43:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 04:43:07 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:43:07.01 2011-Dec-13 04:43:07 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323765787.01 Tue Dec 13 04:43:07 2011 2011-Dec-13 04:43:07 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-13 04:43:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.365576 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 04:43:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.365576 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 04:43:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.365576 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 04:43:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.365576 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 04:43:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.365576 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 04:43:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.365576 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 04:43:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.365576 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 04:43:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.365576 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 04:43:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.365576 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 04:43:07 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-13 04:43:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 04:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2011-Dec-13 04:43:12 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-13 04:43:13 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-13 04:43:13 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-13 04:43:13 LOG5 end_task: Level: (5) ID = <10140> Status = 0 0 0 0 ok 2011-Dec-13 04:43:13 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-13 04:43:13 LOG5 end_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2011-Dec-13 04:43:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-13 04:43:13 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-13 04:43:13 LOG5 finish_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2011-Dec-13 04:43:13 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-13 04:43:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 04:43:13 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-13 04:43:13 LOG5 end_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2011-Dec-13 04:43:13 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-13 04:43:13 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 225.34 and ZA = 3.61 2011-Dec-13 04:43:13 LOG3 track_source: Calling 'track_source AGES3193_p3_119 225.34 3.6130558044 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-13 04:43:13 START begin_task: Starting task 'sending tracking commands' 2011-Dec-13 04:43:13 LOG5 begin_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2011-Dec-13 04:43:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_119} INFO {Slewing to source 'AGES3193_p3_119' ...} 2011-Dec-13 04:43:13 INFO1 track_source: Starting to track AGES3193_p3_119 2011-Dec-13 04:43:13 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_119" 2011-Dec-13 04:43:13 LOG3 vw_send: To DATATAKING: set ra 225.34 2011-Dec-13 04:43:13 LOG3 vw_send: To DATATAKING: set dec 3.6130558044 2011-Dec-13 04:43:13 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-13 04:43:13 LOG3 vw_send: To DATATAKING: pnt tr 225.34 3.6130558044 -CF 2011-Dec-13 04:43:13 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 04:43:13 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-13 04:43:13 LOG5 finish_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2011-Dec-13 04:43:13 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-13 04:43:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 04:43:13 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-13 04:43:13 LOG5 end_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2011-Dec-13 04:43:13 LOG1 fixed_driftmap: Parameters: HA = -00:10:59.9 Start = 09:42:41.7 LST = 09:42:56.8 diff = -15.1 secs 2011-Dec-13 04:43:13 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2011-Dec-13 04:43:13 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-13 04:43:13 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-13 04:43:13 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-13 04:43:13 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-13 04:43:13 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-13 04:43:13 LOG5 begin_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2011-Dec-13 04:43:13 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-13 04:43:13 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-13 04:43:13 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-13 04:43:13 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-13 04:43:13 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-13 04:43:13 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_119 2011-Dec-13 04:43:13 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-13 04:43:13 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-13 04:43:13 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-13 04:43:13 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-13 04:43:13 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-13 04:43:13 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-13 04:43:13 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-13 04:43:13 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-13 04:43:13 LOG3 take_mock_data: PSET configuration: patternid=134700060 2011-Dec-13 04:43:13 LOG3 take_mock_data: PSET configuration: scanid=134700060 2011-Dec-13 04:43:13 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-13 04:43:13 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-13 04:43:13 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-13 04:43:13 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456365576.0 2011-Dec-13 04:43:13 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306365576.0 2011-Dec-13 04:43:13 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-13 04:43:13 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-13 04:43:13 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_119:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=134700060:scanid=134700060:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456365576.0:topobfreqhz=1306365576.0:filetype=1 2011-Dec-13 04:43:13 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-13 04:43:13 LOG5 begin_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2011-Dec-13 04:43:13 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_119" 2011-Dec-13 04:43:13 LOG4 from_mock: From MOCK: psetok 2011-Dec-13 04:43:13 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-13 04:43:13 LOG5 end_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2011-Dec-13 04:43:13 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-13 04:43:13 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-13 04:43:13 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-13 04:43:13 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-13 04:43:13 LOG5 begin_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2011-Dec-13 04:43:13 LOG4 got_cormsg: From DATATAKING: set ra 225.34 2011-Dec-13 04:43:13 LOG4 got_cormsg: From DATATAKING: set dec 3.6130558044 2011-Dec-13 04:43:13 LOG4 from_mock: From MOCK: starok 2011-Dec-13 04:43:13 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-13 04:43:13 LOG5 end_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2011-Dec-13 04:43:13 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-13 04:43:13 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 134700060 2011-Dec-13 04:43:14 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-13 04:43:14 LOG5 begin_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2011-Dec-13 04:43:14 LOG4 got_cormsg: From DATATAKING: vw% 225.34 2011-Dec-13 04:43:14 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-13 04:43:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 04:43:14 LOG4 got_cormsg: From DATATAKING: vw% 3.6130558044 2011-Dec-13 04:43:14 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-13 04:43:14 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 04:43:14 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-13 04:43:14 LOG4 got_cormsg: From DATATAKING: pnt tr 225.34 3.6130558044 -CF 2011-Dec-13 04:43:14 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 04:43:14 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-13 04:43:14 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 04:43:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-13 04:43:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31395.00 2011-Dec-13 04:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2011-Dec-13 04:43:16 INFO2 got_mock_message: Mock spectrometer start file number is 00800 2011-Dec-13 04:43:16 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-13 04:43:16 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2011-Dec-13 04:43:16 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-13 04:43:16 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-13 04:43:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-13 04:43:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-13 04:43:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-13 04:43:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-13 04:43:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-13 04:43:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-13 04:43:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-13 04:43:16 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-13 04:43:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 04:43:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 04:43:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 04:43:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 04:43:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 04:43:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 04:43:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 04:43:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.365576 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 04:43:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.365576 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 04:43:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.365576 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 04:43:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.365576 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 04:43:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.365576 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 04:43:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.365576 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 04:43:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.365576 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 04:43:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.365576 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 04:43:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.365576 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 04:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-13 04:43:17 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2011-Dec-13 04:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-13 04:43:19 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:43:19.01 2011-Dec-13 04:43:19 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323765799.01 Tue Dec 13 04:43:19 2011 2011-Dec-13 04:43:19 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-13 04:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-13 04:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-13 04:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-13 04:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-13 04:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-13 04:43:30 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2011-Dec-13 04:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2011-Dec-13 04:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2011-Dec-13 04:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2011-Dec-13 04:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2011-Dec-13 04:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2011-Dec-13 04:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2011-Dec-13 04:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2011-Dec-13 04:43:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.029 < 0.75)! 2011-Dec-13 04:43:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.117 1.084 0.893 0.928 2011-Dec-13 04:43:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.902 0.988 1.083 0.901 2011-Dec-13 04:43:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.877 1.140 0.949 1.096 2011-Dec-13 04:43:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.111 0.029 0.966 0.030 2011-Dec-13 04:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.144 (still bad) 2011-Dec-13 04:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.150 (still bad) 2011-Dec-13 04:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.033 and 1.158 (still bad) 2011-Dec-13 04:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.155 (still bad) 2011-Dec-13 04:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.147 (still bad) 2011-Dec-13 04:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.143 (still bad) 2011-Dec-13 04:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2011-Dec-13 04:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.127 (still bad) 2011-Dec-13 04:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.126 (still bad) 2011-Dec-13 04:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-13 04:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-13 04:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.119 (still bad) 2011-Dec-13 04:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-13 04:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2011-Dec-13 04:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.033 and 1.124 (still bad) 2011-Dec-13 04:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-13 04:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-13 04:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.117 (still bad) 2011-Dec-13 04:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 04:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2011-Dec-13 04:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.124 (still bad) 2011-Dec-13 04:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-13 04:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-13 04:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.117 (still bad) 2011-Dec-13 04:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-13 04:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2011-Dec-13 04:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.125 (still bad) 2011-Dec-13 04:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-13 04:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-13 04:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.120 (still bad) 2011-Dec-13 04:44:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-13 04:44:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.115 1.079 0.893 0.925 2011-Dec-13 04:44:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.908 0.988 1.084 0.900 2011-Dec-13 04:44:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.867 1.115 0.946 1.092 2011-Dec-13 04:44:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.115 0.021 0.970 0.022 2011-Dec-13 04:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-13 04:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.034 and 1.127 (still bad) 2011-Dec-13 04:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-13 04:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-13 04:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.119 (still bad) 2011-Dec-13 04:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-13 04:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.121 (still bad) 2011-Dec-13 04:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.034 and 1.129 (still bad) 2011-Dec-13 04:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-13 04:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2011-Dec-13 04:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.034 and 1.120 (still bad) 2011-Dec-13 04:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2011-Dec-13 04:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.117 (still bad) 2011-Dec-13 04:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.125 (still bad) 2011-Dec-13 04:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.116 (still bad) 2011-Dec-13 04:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.115 (still bad) 2011-Dec-13 04:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2011-Dec-13 04:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-13 04:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.033 and 1.117 (still bad) 2011-Dec-13 04:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.126 (still bad) 2011-Dec-13 04:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2011-Dec-13 04:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.115 (still bad) 2011-Dec-13 04:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2011-Dec-13 04:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-13 04:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.033 and 1.118 (still bad) 2011-Dec-13 04:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.124 (still bad) 2011-Dec-13 04:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2011-Dec-13 04:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.122 (still bad) 2011-Dec-13 04:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.125 (still bad) 2011-Dec-13 04:45:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-13 04:45:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.127 1.094 0.893 0.927 2011-Dec-13 04:45:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.902 0.982 1.086 0.900 2011-Dec-13 04:45:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.867 1.117 0.947 1.095 2011-Dec-13 04:45:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.111 0.025 0.967 0.026 2011-Dec-13 04:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.033 and 1.129 (still bad) 2011-Dec-13 04:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.033 and 1.128 (still bad) 2011-Dec-13 04:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2011-Dec-13 04:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.124 (still bad) 2011-Dec-13 04:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.121 (still bad) 2011-Dec-13 04:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2011-Dec-13 04:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.033 and 1.117 (still bad) 2011-Dec-13 04:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.118 (still bad) 2011-Dec-13 04:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.116 (still bad) 2011-Dec-13 04:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.117 (still bad) 2011-Dec-13 04:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.116 (still bad) 2011-Dec-13 04:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-13 04:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.115 (still bad) 2011-Dec-13 04:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.118 (still bad) 2011-Dec-13 04:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-13 04:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2011-Dec-13 04:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.116 (still bad) 2011-Dec-13 04:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-13 04:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.116 (still bad) 2011-Dec-13 04:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.117 (still bad) 2011-Dec-13 04:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-13 04:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2011-Dec-13 04:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2011-Dec-13 04:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 04:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2011-Dec-13 04:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.119 (still bad) 2011-Dec-13 04:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-13 04:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2011-Dec-13 04:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2011-Dec-13 04:46:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-13 04:46:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.115 1.078 0.892 0.926 2011-Dec-13 04:46:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.900 0.982 1.084 0.900 2011-Dec-13 04:46:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.867 1.116 0.947 1.092 2011-Dec-13 04:46:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 0.025 0.967 0.026 2011-Dec-13 04:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2011-Dec-13 04:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.118 (still bad) 2011-Dec-13 04:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 04:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-13 04:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-13 04:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-13 04:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.034 and 1.128 (still bad) 2011-Dec-13 04:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-13 04:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-13 04:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.119 (still bad) 2011-Dec-13 04:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2011-Dec-13 04:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-13 04:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.034 and 1.124 (still bad) 2011-Dec-13 04:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2011-Dec-13 04:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 04:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2011-Dec-13 04:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-13 04:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2011-Dec-13 04:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.034 and 1.125 (still bad) 2011-Dec-13 04:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2011-Dec-13 04:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-13 04:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.119 (still bad) 2011-Dec-13 04:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 04:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-13 04:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.124 (still bad) 2011-Dec-13 04:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-13 04:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-13 04:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.119 (still bad) 2011-Dec-13 04:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 04:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2011-Dec-13 04:47:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.035 < 0.75)! 2011-Dec-13 04:47:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.116 1.093 0.898 0.935 2011-Dec-13 04:47:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.945 1.010 1.101 0.908 2011-Dec-13 04:47:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.870 1.123 0.958 1.101 2011-Dec-13 04:47:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.121 0.035 0.977 0.035 2011-Dec-13 04:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.120 (still bad) 2011-Dec-13 04:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-13 04:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.126 (still bad) 2011-Dec-13 04:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.130 (still bad) 2011-Dec-13 04:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.140 (still bad) 2011-Dec-13 04:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.146 (still bad) 2011-Dec-13 04:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.158 (still bad) 2011-Dec-13 04:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.158 (still bad) 2011-Dec-13 04:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.033 and 1.162 (still bad) 2011-Dec-13 04:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.158 (still bad) 2011-Dec-13 04:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.153 (still bad) 2011-Dec-13 04:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.143 (still bad) 2011-Dec-13 04:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.136 (still bad) 2011-Dec-13 04:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2011-Dec-13 04:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.033 and 1.122 (still bad) 2011-Dec-13 04:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2011-Dec-13 04:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2011-Dec-13 04:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.123 (still bad) 2011-Dec-13 04:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.125 (still bad) 2011-Dec-13 04:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2011-Dec-13 04:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.132 (still bad) 2011-Dec-13 04:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.134 (still bad) 2011-Dec-13 04:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-13 04:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.140 (still bad) 2011-Dec-13 04:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-13 04:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.131 (still bad) 2011-Dec-13 04:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.033 and 1.128 (still bad) 2011-Dec-13 04:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-13 04:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.124 (still bad) 2011-Dec-13 04:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.034 and 1.137 (still bad) 2011-Dec-13 04:48:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-13 04:48:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.119 1.083 0.891 0.926 2011-Dec-13 04:48:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.909 0.986 1.092 0.903 2011-Dec-13 04:48:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.867 1.117 0.953 1.098 2011-Dec-13 04:48:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.128 0.020 0.981 0.022 2011-Dec-13 04:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2011-Dec-13 04:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.033 and 1.131 (still bad) 2011-Dec-13 04:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2011-Dec-13 04:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.124 (still bad) 2011-Dec-13 04:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.130 (still bad) 2011-Dec-13 04:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2011-Dec-13 04:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-13 04:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.033 and 1.120 (still bad) 2011-Dec-13 04:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-13 04:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2011-Dec-13 04:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.034 and 1.126 (still bad) 2011-Dec-13 04:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-13 04:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-13 04:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.121 (still bad) 2011-Dec-13 04:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-13 04:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2011-Dec-13 04:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.127 (still bad) 2011-Dec-13 04:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-13 04:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-13 04:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.034 and 1.123 (still bad) 2011-Dec-13 04:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-13 04:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.122 (still bad) 2011-Dec-13 04:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.128 (still bad) 2011-Dec-13 04:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-13 04:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-13 04:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.034 and 1.119 (still bad) 2011-Dec-13 04:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-13 04:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.119 (still bad) 2011-Dec-13 04:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.125 (still bad) 2011-Dec-13 04:49:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-13 04:49:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.119 1.082 0.893 0.926 2011-Dec-13 04:49:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.905 0.985 1.088 0.901 2011-Dec-13 04:49:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 1.117 0.952 1.099 2011-Dec-13 04:49:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.112 0.024 0.966 0.026 2011-Dec-13 04:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-13 04:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.033 and 1.121 (still bad) 2011-Dec-13 04:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-13 04:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2011-Dec-13 04:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.126 (still bad) 2011-Dec-13 04:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2011-Dec-13 04:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-13 04:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.033 and 1.119 (still bad) 2011-Dec-13 04:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-13 04:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2011-Dec-13 04:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Dec-13 04:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2011-Dec-13 04:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2011-Dec-13 04:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2011-Dec-13 04:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-13 04:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.120 (still bad) 2011-Dec-13 04:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.124 (still bad) 2011-Dec-13 04:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-13 04:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2011-Dec-13 04:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2011-Dec-13 04:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-13 04:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.118 (still bad) 2011-Dec-13 04:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.123 (still bad) 2011-Dec-13 04:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-13 04:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2011-Dec-13 04:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2011-Dec-13 04:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-13 04:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.124 (still bad) 2011-Dec-13 04:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.119 (still bad) 2011-Dec-13 04:50:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-13 04:50:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.118 1.080 0.892 0.926 2011-Dec-13 04:50:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.904 0.983 1.085 0.900 2011-Dec-13 04:50:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.865 1.117 0.945 1.090 2011-Dec-13 04:50:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.110 0.025 0.965 0.020 2011-Dec-13 04:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2011-Dec-13 04:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2011-Dec-13 04:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-13 04:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.123 (still bad) 2011-Dec-13 04:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.119 (still bad) 2011-Dec-13 04:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-13 04:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2011-Dec-13 04:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-13 04:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-13 04:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.123 (still bad) 2011-Dec-13 04:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.116 (still bad) 2011-Dec-13 04:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2011-Dec-13 04:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-13 04:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2011-Dec-13 04:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-13 04:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.125 (still bad) 2011-Dec-13 04:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.119 (still bad) 2011-Dec-13 04:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2011-Dec-13 04:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-13 04:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-13 04:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-13 04:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2011-Dec-13 04:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.118 (still bad) 2011-Dec-13 04:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-13 04:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-13 04:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-13 04:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-13 04:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.123 (still bad) 2011-Dec-13 04:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.118 (still bad) 2011-Dec-13 04:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2011-Dec-13 04:51:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-13 04:51:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.116 1.078 0.893 0.927 2011-Dec-13 04:51:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.905 0.988 1.087 0.902 2011-Dec-13 04:51:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.868 1.119 0.949 1.094 2011-Dec-13 04:51:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 0.020 0.965 0.022 2011-Dec-13 04:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-13 04:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-13 04:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.033 and 1.120 (still bad) 2011-Dec-13 04:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2011-Dec-13 04:52:07 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 04:52:07.300 (seconds: 17527.300)!} 2011-Dec-13 04:52:07 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 04:52:07.300 (seconds: 17527.300)! 2011-Dec-13 04:52:08 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 17526.0 to 17527.0! 2011-Dec-13 04:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 04:52:09 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (17526.0 - 17528.0)! 2011-Dec-13 04:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-13 04:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-13 04:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-13 04:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.119 (still bad) 2011-Dec-13 04:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2011-Dec-13 04:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2011-Dec-13 04:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-13 04:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2011-Dec-13 04:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.115 (still bad) 2011-Dec-13 04:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.121 (still bad) 2011-Dec-13 04:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2011-Dec-13 04:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2011-Dec-13 04:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2011-Dec-13 04:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-13 04:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2011-Dec-13 04:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.125 (still bad) 2011-Dec-13 04:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2011-Dec-13 04:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-13 04:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2011-Dec-13 04:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-13 04:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-13 04:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.033 and 1.124 (still bad) 2011-Dec-13 04:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2011-Dec-13 04:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2011-Dec-13 04:52:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-13 04:52:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.120 1.084 0.898 0.928 2011-Dec-13 04:52:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.905 0.986 1.089 0.902 2011-Dec-13 04:52:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 1.114 0.948 1.095 2011-Dec-13 04:52:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 0.026 0.967 0.027 2011-Dec-13 04:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2011-Dec-13 04:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2011-Dec-13 04:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.141 (still bad) 2011-Dec-13 04:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2011-Dec-13 04:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2011-Dec-13 04:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-13 04:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.134 (still bad) 2011-Dec-13 04:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2011-Dec-13 04:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.136 (still bad) 2011-Dec-13 04:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-13 04:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-13 04:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-13 04:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-13 04:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-13 04:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.122 (still bad) 2011-Dec-13 04:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.110 (still bad) 2011-Dec-13 04:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.110 (still bad) 2011-Dec-13 04:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.110 (still bad) 2011-Dec-13 04:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.113 (still bad) 2011-Dec-13 04:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2011-Dec-13 04:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-13 04:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2011-Dec-13 04:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-13 04:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.114 (still bad) 2011-Dec-13 04:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.115 (still bad) 2011-Dec-13 04:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2011-Dec-13 04:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2011-Dec-13 04:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2011-Dec-13 04:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2011-Dec-13 04:54:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-13 04:54:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.120 1.083 0.899 0.930 2011-Dec-13 04:54:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.905 0.986 1.087 0.902 2011-Dec-13 04:54:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 1.115 0.948 1.095 2011-Dec-13 04:54:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.110 0.021 0.966 0.023 2011-Dec-13 04:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-13 04:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-13 04:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2011-Dec-13 04:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2011-Dec-13 04:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-13 04:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-13 04:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-13 04:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-13 04:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-13 04:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2011-Dec-13 04:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2011-Dec-13 04:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-13 04:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-13 04:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-13 04:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2011-Dec-13 04:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2011-Dec-13 04:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2011-Dec-13 04:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2011-Dec-13 04:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2011-Dec-13 04:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 04:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2011-Dec-13 04:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2011-Dec-13 04:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.114 (still bad) 2011-Dec-13 04:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-13 04:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-13 04:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-13 04:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2011-Dec-13 04:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-13 04:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-13 04:55:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-13 04:55:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.114 1.079 0.893 0.924 2011-Dec-13 04:55:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.902 0.985 1.084 0.900 2011-Dec-13 04:55:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.864 1.113 0.945 1.091 2011-Dec-13 04:55:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.110 0.020 0.965 0.022 2011-Dec-13 04:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-13 04:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-13 04:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2011-Dec-13 04:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-13 04:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-13 04:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-13 04:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-13 04:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-13 04:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2011-Dec-13 04:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-13 04:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2011-Dec-13 04:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2011-Dec-13 04:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2011-Dec-13 04:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.033 and 1.122 (still bad) 2011-Dec-13 04:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-13 04:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2011-Dec-13 04:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2011-Dec-13 04:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2011-Dec-13 04:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2011-Dec-13 04:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.033 and 1.119 (still bad) 2011-Dec-13 04:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2011-Dec-13 04:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.114 (still bad) 2011-Dec-13 04:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2011-Dec-13 04:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-13 04:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2011-Dec-13 04:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.117 (still bad) 2011-Dec-13 04:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-13 04:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-13 04:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2011-Dec-13 04:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-13 04:56:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2011-Dec-13 04:56:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.115 1.080 0.891 0.925 2011-Dec-13 04:56:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.902 0.983 1.086 0.903 2011-Dec-13 04:56:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 1.115 0.944 1.094 2011-Dec-13 04:56:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 0.028 0.963 0.029 2011-Dec-13 04:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.032 and 1.117 (still bad) 2011-Dec-13 04:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2011-Dec-13 04:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-13 04:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2011-Dec-13 04:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.115 (still bad) 2011-Dec-13 04:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.117 (still bad) 2011-Dec-13 04:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.119 (still bad) 2011-Dec-13 04:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-13 04:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-13 04:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-13 04:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2011-Dec-13 04:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2011-Dec-13 04:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.120 (still bad) 2011-Dec-13 04:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.121 (still bad) 2011-Dec-13 04:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2011-Dec-13 04:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2011-Dec-13 04:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-13 04:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-13 04:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.119 (still bad) 2011-Dec-13 04:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-13 04:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-13 04:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-13 04:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2011-Dec-13 04:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2011-Dec-13 04:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2011-Dec-13 04:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2011-Dec-13 04:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2011-Dec-13 04:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-13 04:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2011-Dec-13 04:57:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2011-Dec-13 04:57:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.125 1.087 0.892 0.926 2011-Dec-13 04:57:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.904 0.986 1.086 0.903 2011-Dec-13 04:57:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.871 1.124 0.947 1.092 2011-Dec-13 04:57:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 0.019 0.964 0.021 2011-Dec-13 04:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.033 and 1.132 (still bad) 2011-Dec-13 04:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2011-Dec-13 04:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2011-Dec-13 04:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.150 (still bad) 2011-Dec-13 04:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.150 (still bad) 2011-Dec-13 04:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.148 (still bad) 2011-Dec-13 04:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.034 and 1.151 (still bad) 2011-Dec-13 04:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2011-Dec-13 04:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2011-Dec-13 04:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.126 (still bad) 2011-Dec-13 04:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-13 04:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-13 04:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.034 and 1.126 (still bad) 2011-Dec-13 04:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 04:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-13 04:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2011-Dec-13 04:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2011-Dec-13 04:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-13 04:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.034 and 1.124 (still bad) 2011-Dec-13 04:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-13 04:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 04:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2011-Dec-13 04:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-13 04:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-13 04:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.034 and 1.126 (still bad) 2011-Dec-13 04:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-13 04:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-13 04:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2011-Dec-13 04:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-13 04:58:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-13 04:58:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.116 1.075 0.891 0.927 2011-Dec-13 04:58:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.902 0.984 1.086 0.901 2011-Dec-13 04:58:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 1.115 0.946 1.091 2011-Dec-13 04:58:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.111 0.021 0.965 0.020 2011-Dec-13 04:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.034 and 1.123 (still bad) 2011-Dec-13 04:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-13 04:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-13 04:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2011-Dec-13 04:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-13 04:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-13 04:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.033 and 1.127 (still bad) 2011-Dec-13 04:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2011-Dec-13 04:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2011-Dec-13 04:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-13 04:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-13 04:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-13 04:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.033 and 1.127 (still bad) 2011-Dec-13 04:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2011-Dec-13 04:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2011-Dec-13 04:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-13 04:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-13 04:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-13 04:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2011-Dec-13 04:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2011-Dec-13 04:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2011-Dec-13 04:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-13 04:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-13 04:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-13 04:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-13 04:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2011-Dec-13 04:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2011-Dec-13 04:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-13 04:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-13 04:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 04:59:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-13 04:59:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.119 1.083 0.898 0.929 2011-Dec-13 04:59:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.904 0.986 1.093 0.904 2011-Dec-13 04:59:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.869 1.121 0.948 1.095 2011-Dec-13 04:59:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.112 0.025 0.967 0.026 2011-Dec-13 04:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2011-Dec-13 04:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2011-Dec-13 04:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2011-Dec-13 04:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2011-Dec-13 04:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2011-Dec-13 04:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2011-Dec-13 04:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2011-Dec-13 04:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.114 (still bad) 2011-Dec-13 04:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2011-Dec-13 04:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.114 (still bad) 2011-Dec-13 04:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2011-Dec-13 04:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.123 (still bad) 2011-Dec-13 04:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-13 04:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-13 04:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-13 04:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-13 04:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2011-Dec-13 04:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.123 (still bad) 2011-Dec-13 04:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-13 04:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-13 04:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-13 04:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-13 04:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-13 04:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.122 (still bad) 2011-Dec-13 04:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.114 (still bad) 2011-Dec-13 05:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.116 (still bad) 2011-Dec-13 05:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.116 (still bad) 2011-Dec-13 05:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.116 (still bad) 2011-Dec-13 05:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.119 (still bad) 2011-Dec-13 05:00:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.029 < 0.75)! 2011-Dec-13 05:00:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.122 1.085 0.899 0.932 2011-Dec-13 05:00:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.900 0.988 1.095 0.910 2011-Dec-13 05:00:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.867 1.115 0.945 1.091 2011-Dec-13 05:00:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.110 0.029 0.967 0.029 2011-Dec-13 05:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.114 (still bad) 2011-Dec-13 05:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.114 (still bad) 2011-Dec-13 05:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.116 (still bad) 2011-Dec-13 05:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.119 (still bad) 2011-Dec-13 05:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.130 (still bad) 2011-Dec-13 05:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.140 (still bad) 2011-Dec-13 05:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.151 (still bad) 2011-Dec-13 05:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.164 (still bad) 2011-Dec-13 05:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.170 (still bad) 2011-Dec-13 05:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.172 (still bad) 2011-Dec-13 05:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.170 (still bad) 2011-Dec-13 05:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.160 (still bad) 2011-Dec-13 05:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.147 (still bad) 2011-Dec-13 05:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.138 (still bad) 2011-Dec-13 05:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.126 (still bad) 2011-Dec-13 05:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.119 (still bad) 2011-Dec-13 05:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.121 (still bad) 2011-Dec-13 05:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.114 (still bad) 2011-Dec-13 05:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.113 (still bad) 2011-Dec-13 05:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.117 (still bad) 2011-Dec-13 05:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.115 (still bad) 2011-Dec-13 05:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.117 (still bad) 2011-Dec-13 05:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.124 (still bad) 2011-Dec-13 05:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.115 (still bad) 2011-Dec-13 05:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.114 (still bad) 2011-Dec-13 05:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.116 (still bad) 2011-Dec-13 05:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.113 (still bad) 2011-Dec-13 05:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.114 (still bad) 2011-Dec-13 05:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.125 (still bad) 2011-Dec-13 05:01:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2011-Dec-13 05:01:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.114 1.075 0.894 0.924 2011-Dec-13 05:01:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.900 0.985 1.084 0.901 2011-Dec-13 05:01:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.864 1.113 0.946 1.094 2011-Dec-13 05:01:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 0.028 0.963 0.028 2011-Dec-13 05:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-13 05:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2011-Dec-13 05:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-13 05:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-13 05:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.128 (still bad) 2011-Dec-13 05:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2011-Dec-13 05:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-13 05:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2011-Dec-13 05:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2011-Dec-13 05:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2011-Dec-13 05:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.123 (still bad) 2011-Dec-13 05:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2011-Dec-13 05:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2011-Dec-13 05:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2011-Dec-13 05:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2011-Dec-13 05:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-13 05:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.125 (still bad) 2011-Dec-13 05:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2011-Dec-13 05:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-13 05:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2011-Dec-13 05:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2011-Dec-13 05:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.130 (still bad) 2011-Dec-13 05:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2011-Dec-13 05:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2011-Dec-13 05:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2011-Dec-13 05:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.149 (still bad) 2011-Dec-13 05:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2011-Dec-13 05:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2011-Dec-13 05:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.131 (still bad) 2011-Dec-13 05:02:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-13 05:02:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.125 1.082 0.895 0.923 2011-Dec-13 05:02:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.902 0.985 1.082 0.900 2011-Dec-13 05:02:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.861 1.111 0.942 1.089 2011-Dec-13 05:02:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 0.027 0.965 0.027 2011-Dec-13 05:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2011-Dec-13 05:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-13 05:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2011-Dec-13 05:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-13 05:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.126 (still bad) 2011-Dec-13 05:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2011-Dec-13 05:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.124 (still bad) 2011-Dec-13 05:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.123 (still bad) 2011-Dec-13 05:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-13 05:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-13 05:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-13 05:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2011-Dec-13 05:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2011-Dec-13 05:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-13 05:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-13 05:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-13 05:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2011-Dec-13 05:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-13 05:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-13 05:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2011-Dec-13 05:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2011-Dec-13 05:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-13 05:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2011-Dec-13 05:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-13 05:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-13 05:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2011-Dec-13 05:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2011-Dec-13 05:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-13 05:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2011-Dec-13 05:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-13 05:03:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-13 05:03:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.116 1.074 0.893 0.923 2011-Dec-13 05:03:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.901 0.984 1.081 0.898 2011-Dec-13 05:03:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.862 1.112 0.941 1.088 2011-Dec-13 05:03:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 0.027 0.964 0.027 2011-Dec-13 05:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-13 05:03:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 05:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2011-Dec-13 05:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2011-Dec-13 05:03:20 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-13 05:03:20 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-13 05:03:20 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-13 05:03:20 LOG5 end_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2011-Dec-13 05:03:20 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-13 05:03:20 LOG5 end_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2011-Dec-13 05:03:20 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-13 05:03:20 LOG5 finish_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2011-Dec-13 05:03:20 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-13 05:03:20 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-13 05:03:20 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-13 05:03:20 LOG5 end_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2011-Dec-13 05:03:20 COMMAND run_command_line: EXECUTING command 27: 'ENDIF' 2011-Dec-13 05:03:20 COMMAND run_command_line: EXECUTING command 30: 'IF LSTSLEW(AGES3193_p3_129) < 100840 THEN' 2011-Dec-13 05:03:20 LOG3 is_if_valid: Current source data: up 135.9 3.2 UP - - 73 3.7 2011-Dec-13 05:03:20 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_129) < 100840 2011-Dec-13 05:03:20 INFO5 is_if_valid: Condition parsed as: 10.113634666666668 < 10.144444444444444 2011-Dec-13 05:03:20 COMMAND run_command_line: EXECUTING command 31: 'FIXEDDRIFT az=123.31 alfaangle=73.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_129 ra=95300.00 dec=204100.00' 2011-Dec-13 05:03:20 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-13 05:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2011-Dec-13 05:03:21 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-13 05:03:21 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 123.31 73.0 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_129 95300.00 204100.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-13 05:03:21 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-13 05:03:21 LOG5 begin_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2011-Dec-13 05:03:21 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_119' 2011-Dec-13 05:03:21 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-13 05:03:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_129} 2011-Dec-13 05:03:21 INFO3 fixed_driftmap: Sending telescope to Az = 123.31 and ZA = 4.20 2011-Dec-13 05:03:21 LOG3 track_source: Calling 'track_source AGES3193_p3_129 123.31 4.2008700782 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-13 05:03:21 START begin_task: Starting task 'sending tracking commands' 2011-Dec-13 05:03:21 LOG5 begin_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2011-Dec-13 05:03:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_129} INFO {Slewing to source 'AGES3193_p3_129' ...} 2011-Dec-13 05:03:21 INFO1 track_source: Starting to track AGES3193_p3_129 2011-Dec-13 05:03:21 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_129" 2011-Dec-13 05:03:21 LOG3 vw_send: To DATATAKING: set ra 123.31 2011-Dec-13 05:03:21 LOG3 vw_send: To DATATAKING: set dec 4.2008700782 2011-Dec-13 05:03:21 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-13 05:03:21 LOG3 vw_send: To DATATAKING: pnt tr 123.31 4.2008700782 -CF 2011-Dec-13 05:03:21 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 05:03:21 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-13 05:03:21 LOG5 finish_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2011-Dec-13 05:03:21 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-13 05:03:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 05:03:21 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-13 05:03:21 LOG5 end_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2011-Dec-13 05:03:21 START begin_task: Starting task 'rotate ALFA to +73 degrees' 2011-Dec-13 05:03:21 LOG5 begin_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2011-Dec-13 05:03:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +73 degrees ...} 2011-Dec-13 05:03:21 INFO2 rotate_alfa: ALFA commanded to +73.0 degrees 2011-Dec-13 05:03:21 LOG3 sock_errsend: To ALFAMOTOR: POSITION 73.0 REPLY 2011-Dec-13 05:03:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-13 05:03:21 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-13 05:03:21 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2011-Dec-13 05:03:21 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_129" 2011-Dec-13 05:03:21 LOG4 got_cormsg: From DATATAKING: set ra 123.31 2011-Dec-13 05:03:21 LOG4 got_cormsg: From DATATAKING: set dec 4.2008700782 2011-Dec-13 05:03:21 LOG4 got_cormsg: From DATATAKING: vw% 123.31 2011-Dec-13 05:03:21 LOG4 got_cormsg: From DATATAKING: vw% 4.2008700782 2011-Dec-13 05:03:21 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:03:21 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-13 05:03:21 LOG4 got_cormsg: From DATATAKING: pnt tr 123.31 4.2008700782 -CF 2011-Dec-13 05:03:21 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 05:03:21 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-13 05:03:21 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:04:15 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-13 05:04:15 INFO3 alfa_motor: ALFA rotator in-position +73.00 degrees 2011-Dec-13 05:04:15 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-13 05:04:15 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2011-Dec-13 05:04:15 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-13 05:04:15 STOP finish_task: Finishing task 'rotate ALFA to +73 degrees' 2011-Dec-13 05:04:15 LOG5 finish_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2011-Dec-13 05:04:15 INFO2 finish_task: DONE finished configuration: rotating ALFA to +73 degrees 2011-Dec-13 05:04:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 05:04:15 STOP end_task: Finishing task 'rotate ALFA to +73 degrees' with status 'OK' 2011-Dec-13 05:04:15 LOG5 end_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2011-Dec-13 05:04:15 START begin_task: Starting task 'waiting on telescope' 2011-Dec-13 05:04:15 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2011-Dec-13 05:04:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-13 05:04:15 LOG3 waittrk: Start waittrk 5 2011-Dec-13 05:04:15 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-13 05:04:15 LOG5 begin_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2011-Dec-13 05:04:20 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-13 05:04:20 LOG5 end_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2011-Dec-13 05:04:20 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-13 05:04:20 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2011-Dec-13 05:07:06 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 05:07:06.312 (seconds: 18426.312)!} 2011-Dec-13 05:07:06 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 05:07:06.312 (seconds: 18426.312)! 2011-Dec-13 05:07:37 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-13 05:07:37 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2011-Dec-13 05:07:37 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-13 05:07:37 INFO2 waittrk: Now tracking AGES3193_p3_129 2011-Dec-13 05:07:37 LOG4 waittrk: Current telescope position: Az = 123.06 ZA = 4.20 2011-Dec-13 05:07:37 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-13 05:07:37 LOG5 finish_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2011-Dec-13 05:07:37 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-13 05:07:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 05:07:37 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-13 05:07:37 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2011-Dec-13 05:07:37 START begin_task: Starting task 'selecting calibration type' 2011-Dec-13 05:07:37 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2011-Dec-13 05:07:37 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-13 05:07:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-13 05:07:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 05:07:37 START begin_task: Starting task 'waiting on setcal' 2011-Dec-13 05:07:37 LOG5 begin_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2011-Dec-13 05:07:37 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-13 05:07:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 05:07:38 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:07:38 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-13 05:07:38 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-13 05:07:38 LOG5 end_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2011-Dec-13 05:07:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-13 05:07:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-13 05:07:38 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-13 05:07:38 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-13 05:07:38 LOG5 begin_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2011-Dec-13 05:07:38 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:07:38 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-13 05:07:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-13 05:07:38 LOG5 end_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2011-Dec-13 05:07:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-13 05:07:38 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-13 05:07:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-13 05:07:38 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-13 05:07:38 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-13 05:07:38 LOG5 begin_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2011-Dec-13 05:07:38 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-13 05:07:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-13 05:07:38 LOG5 end_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2011-Dec-13 05:07:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-13 05:07:38 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-13 05:07:38 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-13 05:07:38 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2011-Dec-13 05:07:38 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Dec-13 05:07:38 INFO2 astwait: Waiting for 15 seconds from 09:07:38 to 09:07:53 UTC ... 2011-Dec-13 05:07:38 LOG4 send_obs_status: To obs_status: <1> TASKTIME 15 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-13 05:07:38 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Dec-13 05:07:38 LOG5 begin_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2011-Dec-13 05:07:53 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Dec-13 05:07:53 LOG5 end_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2011-Dec-13 05:07:53 INFO3 astwait: Finished waiting 2011-Dec-13 05:07:53 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-13 05:07:53 LOG5 dopset_later: Calling 'dopset_later 60.649426581159389' 2011-Dec-13 05:07:53 INFO3 dopset_later: Setting Doppler correction for 05:08:53 (60.6 seconds from now) 2011-Dec-13 05:07:53 LOG5 antvel: Calling 'antvel 123.310000 4.200870 F Heliocentric 60.649426581159389' 2011-Dec-13 05:07:53 LOG2 antvel: Transforming current Az = 123.31 ZA = 4.20 to apparent RA = 09:53:41.4 Dec = +20:37:23.4 2011-Dec-13 05:07:53 LOG2 antvel: Parameters to Doppler: Heliocentric 32933 2011 347 0.0 2011-Dec-13 05:07:53 INFO5 antvel: Computed antenna velocity: -26.49325 km/s 2011-Dec-13 05:07:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-26.4932472751 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-13 05:07:53 INFO4 dopset_gen: New sky frequencies: 1381.365503 1381.365503 1381.365503 1381.365503 1381.365503 1381.365503 1381.365503 1381.365503 1381.365503 2011-Dec-13 05:07:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.365503 sky0=1381.365503 sky1=1381.365503 sky2=1381.365503 sky3=1381.365503 sky4=1381.365503 sky5=1381.365503 sky6=1381.365503 sky7=1381.365503 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-13 05:07:53 LOG2 dopset_gen: Result from 'sky2syn': 1631.365503 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-13 05:07:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631365503.0} 2011-Dec-13 05:07:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 05:07:53 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-13 05:07:53 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-13 05:07:53 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.8 Dec = +20:40:46.7 2011-Dec-13 05:07:53 LOG3 track_source: Calling 'track_source AGES3193_p3_129 095203.8 204046.7 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-13 05:07:53 START begin_task: Starting task 'sending tracking commands' 2011-Dec-13 05:07:53 LOG5 begin_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2011-Dec-13 05:07:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_129} INFO {Slewing to source 'AGES3193_p3_129' ...} 2011-Dec-13 05:07:53 INFO1 track_source: Starting to track AGES3193_p3_129 2011-Dec-13 05:07:53 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_129" 2011-Dec-13 05:07:53 LOG3 vw_send: To DATATAKING: set ra 095203.8 2011-Dec-13 05:07:53 LOG3 vw_send: To DATATAKING: set dec 204046.7 2011-Dec-13 05:07:53 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-13 05:07:53 LOG3 vw_send: To DATATAKING: pnt tr 095203.8 204046.7 -CJ 2011-Dec-13 05:07:53 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 05:07:53 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-13 05:07:53 LOG5 finish_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2011-Dec-13 05:07:53 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-13 05:07:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 05:07:53 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-13 05:07:53 LOG5 end_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2011-Dec-13 05:07:53 START begin_task: Starting task 'waiting on telescope' 2011-Dec-13 05:07:53 LOG5 begin_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2011-Dec-13 05:07:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-13 05:07:53 LOG3 waittrk: Start waittrk 5 2011-Dec-13 05:07:53 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-13 05:07:53 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2011-Dec-13 05:07:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631365503.0} 2011-Dec-13 05:07:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 05:07:53 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:07:53 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_129" 2011-Dec-13 05:07:53 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:07:53 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:07:53 LOG4 got_cormsg: From DATATAKING: set ra 095203.8 2011-Dec-13 05:07:53 LOG4 got_cormsg: From DATATAKING: set dec 204046.7 2011-Dec-13 05:07:53 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-13 05:07:53 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.8 204046.7 -CJ 2011-Dec-13 05:07:53 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 05:07:53 LOG4 got_cormsg: From DATATAKING: 095203.8 2011-Dec-13 05:07:53 LOG4 got_cormsg: From DATATAKING: vw% 204046.7 2011-Dec-13 05:07:53 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2011-Dec-13 05:07:58 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-13 05:07:58 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2011-Dec-13 05:07:58 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-13 05:07:58 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2011-Dec-13 05:08:02 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-13 05:08:02 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2011-Dec-13 05:08:02 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-13 05:08:02 INFO2 waittrk: Now tracking AGES3193_p3_129 2011-Dec-13 05:08:02 LOG4 waittrk: Current telescope position: Az = 122.84 ZA = 4.22 2011-Dec-13 05:08:02 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-13 05:08:02 LOG5 finish_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2011-Dec-13 05:08:02 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-13 05:08:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 05:08:02 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-13 05:08:02 LOG5 end_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2011-Dec-13 05:08:02 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-13 05:08:02 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2011-Dec-13 05:08:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-13 05:08:02 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-13 05:08:02 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-13 05:08:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-13 05:08:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 05:08:02 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-13 05:08:02 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2011-Dec-13 05:08:02 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-13 05:08:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 05:08:05 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:08:05 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-13 05:08:05 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-13 05:08:05 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2011-Dec-13 05:08:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-13 05:08:05 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-13 05:08:05 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2011-Dec-13 05:08:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-13 05:08:05 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-13 05:08:05 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-13 05:08:05 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-13 05:08:05 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-13 05:08:05 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-13 05:08:05 LOG5 begin_task: Level: (5) ID = <10165> Status = 0 0 0 0 ok 2011-Dec-13 05:08:06 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:08:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-13 05:08:06 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 7 6 dB 2011-Dec-13 05:08:06 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 3 dB 2011-Dec-13 05:08:06 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 2 dB 2011-Dec-13 05:08:06 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2011-Dec-13 05:08:06 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-13 05:08:06 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-13 05:08:06 LOG5 end_task: Level: (5) ID = <10165> Status = 0 0 0 0 ok 2011-Dec-13 05:08:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.093 1.080 ALFA beam 1: 1.128 0.932 2011-Dec-13 05:08:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.911 1.002 ALFA beam 3: 1.080 1.108 2011-Dec-13 05:08:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.859 1.109 ALFA beam 5: 0.924 1.098 2011-Dec-13 05:08:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.063 0.014 ALFA beam 7: 0.925 0.014 2011-Dec-13 05:08:06 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-13 05:08:06 LOG5 finish_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2011-Dec-13 05:08:06 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-13 05:08:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 05:08:06 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-13 05:08:06 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2011-Dec-13 05:08:06 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-13 05:08:06 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2011-Dec-13 05:08:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-13 05:08:06 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-13 05:08:06 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-13 05:08:06 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-13 05:08:06 LOG5 begin_task: Level: (5) ID = <10167> Status = 0 0 0 0 ok 2011-Dec-13 05:08:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-13 05:08:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.093 1.080 1.128 0.932 2011-Dec-13 05:08:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.911 1.002 1.080 1.108 2011-Dec-13 05:08:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.859 1.109 0.924 1.098 2011-Dec-13 05:08:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.063 0.014 0.925 0.014 2011-Dec-13 05:08:12 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.3 27.6 B 30.4 30.5 mn:A 0.2 0.2 B -0.1 -0.3 gn: 11 11 2011-Dec-13 05:08:12 INFO3 from_mock: From MOCK: b0s1g0 rms:A 31.8 30.4 B 28.4 30.0 mn:A 0.3 -0.5 B -0.4 0.1 gn: 12 11 2011-Dec-13 05:08:12 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.2 28.3 B 33.2 29.1 mn:A 0.5 0.6 B 0.2 -0.1 gn: 7 11 2011-Dec-13 05:08:13 INFO3 from_mock: From MOCK: b1s1g0 rms:A 30.1 27.7 B 31.5 31.6 mn:A -0.2 -0.3 B 0.4 0.1 gn: 8 10 2011-Dec-13 05:08:13 INFO3 from_mock: From MOCK: b2s0g0 rms:A 28.8 27.9 B 28.4 29.7 mn:A -0.1 -0.3 B 0.3 0.1 gn: 10 11 2011-Dec-13 05:08:13 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.8 30.0 B 29.3 27.2 mn:A 0.3 -0.4 B 0.2 0.3 gn: 11 11 2011-Dec-13 05:08:13 INFO3 from_mock: From MOCK: b3s0g0 rms:A 29.4 29.2 B 31.1 27.8 mn:A 0.3 -0.3 B 0.0 -0.3 gn: 12 12 2011-Dec-13 05:08:13 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.6 29.9 B 29.6 30.8 mn:A -0.3 0.3 B 0.1 0.2 gn: 12 12 2011-Dec-13 05:08:13 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.8 29.9 B 31.6 31.8 mn:A -0.2 -0.3 B -0.5 -0.0 gn: 13 12 2011-Dec-13 05:08:13 INFO3 from_mock: From MOCK: b4s1g0 rms:A 29.8 27.0 B 30.5 29.4 mn:A -0.1 0.1 B -0.3 0.2 gn: 15 13 2011-Dec-13 05:08:13 INFO3 from_mock: From MOCK: b5s0g0 rms:A 28.8 27.8 B 30.4 30.4 mn:A 0.4 0.5 B 0.0 0.5 gn: 12 11 2011-Dec-13 05:08:13 INFO3 from_mock: From MOCK: b5s1g0 rms:A 29.0 28.8 B 30.7 30.4 mn:A -0.4 0.3 B -0.1 0.2 gn: 12 11 2011-Dec-13 05:08:13 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.0 29.3 B 15.4 15.9 mn:A -0.4 0.2 B 0.5 -0.4 gn: 13 31 2011-Dec-13 05:08:13 INFO3 from_mock: From MOCK: b6s1g0 rms:A 29.6 26.9 B 12.3 12.0 mn:A 0.6 0.5 B 0.1 0.2 gn: 13 31 2011-Dec-13 05:08:13 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-13 05:08:13 LOG5 end_task: Level: (5) ID = <10167> Status = 0 0 0 0 ok 2011-Dec-13 05:08:13 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-13 05:08:13 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-13 05:08:13 LOG5 finish_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2011-Dec-13 05:08:13 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-13 05:08:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 05:08:13 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-13 05:08:13 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2011-Dec-13 05:08:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-13 05:08:13 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-13 05:08:13 LOG5 finish_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2011-Dec-13 05:08:13 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-13 05:08:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 05:08:13 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-13 05:08:13 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2011-Dec-13 05:08:13 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ep 2011-Dec-13 05:08:13 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ep 2011-Dec-13 05:08:13 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ep 2011-Dec-13 05:08:13 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ep 2011-Dec-13 05:08:13 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-13 05:08:13 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-13 05:08:13 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2011-Dec-13 05:08:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-13 05:08:13 START begin_task: Starting task 'selecting calibration type' 2011-Dec-13 05:08:13 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2011-Dec-13 05:08:13 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-13 05:08:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-13 05:08:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 05:08:13 START begin_task: Starting task 'waiting on setcal' 2011-Dec-13 05:08:13 LOG5 begin_task: Level: (5) ID = <10170> Status = 0 0 0 0 ok 2011-Dec-13 05:08:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ep' 2011-Dec-13 05:08:13 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-13 05:08:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 05:08:13 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:08:13 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-13 05:08:13 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-13 05:08:13 LOG5 end_task: Level: (5) ID = <10170> Status = 0 0 0 0 ok 2011-Dec-13 05:08:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-13 05:08:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-13 05:08:13 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-13 05:08:13 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-13 05:08:13 LOG5 begin_task: Level: (5) ID = <10171> Status = 0 0 0 0 ok 2011-Dec-13 05:08:13 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:08:13 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-13 05:08:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-13 05:08:13 LOG5 end_task: Level: (5) ID = <10171> Status = 0 0 0 0 ok 2011-Dec-13 05:08:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-13 05:08:13 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-13 05:08:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-13 05:08:13 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-13 05:08:13 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-13 05:08:13 LOG5 begin_task: Level: (5) ID = <10172> Status = 0 0 0 0 ok 2011-Dec-13 05:08:14 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-13 05:08:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-13 05:08:14 LOG5 end_task: Level: (5) ID = <10172> Status = 0 0 0 0 ok 2011-Dec-13 05:08:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-13 05:08:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-13 05:08:14 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-13 05:08:14 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2011-Dec-13 05:08:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-13 05:08:14 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-13 05:08:14 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-13 05:08:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-13 05:08:14 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2011-Dec-13 05:08:14 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-13 05:08:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-13 05:08:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-13 05:08:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-13 05:08:14 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2011-Dec-13 05:08:14 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-13 05:08:14 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-13 05:08:14 LOG5 begin_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2011-Dec-13 05:08:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-13 05:08:14 LOG5 log_alfabeam: Parameters: 9.8677222222222234 20.679638888888892 10.133858 2011.9506202309428 72.999931 2011-Dec-13 05:08:14 LOG4 log_alfabeam: ALFABEAM 0 9.867722222222230 20.679638888888888 2011-Dec-13 05:08:14 LOG4 log_alfabeam: ALFABEAM 1 9.870210045634231 20.586465854921112 2011-Dec-13 05:08:14 LOG4 log_alfabeam: ALFABEAM 2 9.874894909379989 20.648519270780582 2011-Dec-13 05:08:14 LOG4 log_alfabeam: ALFABEAM 3 9.872534738118668 20.742118934056297 2011-Dec-13 05:08:14 LOG4 log_alfabeam: ALFABEAM 4 9.865371536937365 20.774271648366341 2011-Dec-13 05:08:14 LOG4 log_alfabeam: ALFABEAM 5 9.860509266162943 20.709514841530570 2011-Dec-13 05:08:14 LOG4 log_alfabeam: ALFABEAM 6 9.862989331826892 20.615304840630223 2011-Dec-13 05:08:14 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-13 05:08:14 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-13 05:08:14 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-13 05:08:14 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_129 2011-Dec-13 05:08:14 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-13 05:08:14 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-13 05:08:14 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-13 05:08:14 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-13 05:08:14 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-13 05:08:14 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-13 05:08:14 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-13 05:08:14 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-13 05:08:14 LOG3 take_mock_data: PSET configuration: patternid=134700060 2011-Dec-13 05:08:14 LOG3 take_mock_data: PSET configuration: scanid=134700061 2011-Dec-13 05:08:14 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-13 05:08:14 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-13 05:08:14 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-13 05:08:14 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456365503.0 2011-Dec-13 05:08:14 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306365503.0 2011-Dec-13 05:08:14 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-13 05:08:14 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-13 05:08:14 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_129:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=134700060:scanid=134700061:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456365503.0:topobfreqhz=1306365503.0:filetype=1 2011-Dec-13 05:08:14 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-13 05:08:14 LOG5 begin_task: Level: (5) ID = <10175> Status = 0 0 0 0 ok 2011-Dec-13 05:08:14 LOG4 from_mock: From MOCK: psetok 2011-Dec-13 05:08:14 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-13 05:08:14 LOG5 end_task: Level: (5) ID = <10175> Status = 0 0 0 0 ok 2011-Dec-13 05:08:14 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-13 05:08:14 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-13 05:08:14 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-13 05:08:14 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-13 05:08:14 LOG5 begin_task: Level: (5) ID = <10176> Status = 0 0 0 0 ok 2011-Dec-13 05:08:14 NOTE WAPPDATA-new_file: New FITS file: wapp.20111213.a2048.0003.fits 2011-Dec-13 05:08:14 LOG4 from_mock: From MOCK: starok 2011-Dec-13 05:08:14 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-13 05:08:14 LOG5 end_task: Level: (5) ID = <10176> Status = 0 0 0 0 ok 2011-Dec-13 05:08:14 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-13 05:08:14 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134700061 2011-Dec-13 05:08:15 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-13 05:08:15 LOG5 begin_task: Level: (5) ID = <10177> Status = 0 0 0 0 ok 2011-Dec-13 05:08:15 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111213.a2048.0003.fits} 2011-Dec-13 05:08:15 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-13 05:08:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 05:08:15 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-13 05:08:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-13 05:08:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32896.00 2011-Dec-13 05:08:16 INFO2 got_mock_message: Mock spectrometer start file number is 00900 2011-Dec-13 05:08:16 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-13 05:08:16 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-13 05:08:16 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-13 05:08:16 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-13 05:08:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-13 05:08:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-13 05:08:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-13 05:08:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-13 05:08:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-13 05:08:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-13 05:08:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-13 05:08:16 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-13 05:08:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:08:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:08:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:08:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:08:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:08:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:08:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:08:19 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:08:19.01 2011-Dec-13 05:08:19 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323767299.01 Tue Dec 13 05:08:19 2011 2011-Dec-13 05:08:19 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-13 05:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.365503 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 05:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.365503 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 05:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.365503 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 05:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.365503 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 05:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.365503 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 05:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2011-Dec-13 05:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.365503 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 05:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.365503 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 05:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.365503 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 05:08:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.365503 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 05:08:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 05:08:25 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-13 05:08:25 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-13 05:08:25 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-13 05:08:25 LOG5 end_task: Level: (5) ID = <10177> Status = 0 0 0 0 ok 2011-Dec-13 05:08:25 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-13 05:08:25 LOG5 end_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2011-Dec-13 05:08:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-13 05:08:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-13 05:08:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-13 05:08:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-13 05:08:25 LOG5 begin_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2011-Dec-13 05:08:25 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-13 05:08:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-13 05:08:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-13 05:08:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-13 05:08:25 LOG5 end_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2011-Dec-13 05:08:25 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-13 05:08:25 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-13 05:08:25 LOG5 begin_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2011-Dec-13 05:08:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-13 05:08:25 LOG5 log_alfabeam: Parameters: 9.8677222222222234 20.679638888888892 10.136922 2011.9506205795119 72.999931 2011-Dec-13 05:08:25 LOG4 log_alfabeam: ALFABEAM 0 9.867722222222230 20.679638888888899 2011-Dec-13 05:08:25 LOG4 log_alfabeam: ALFABEAM 1 9.870245952071013 20.586653053403392 2011-Dec-13 05:08:25 LOG4 log_alfabeam: ALFABEAM 2 9.874907181614420 20.649079005943648 2011-Dec-13 05:08:25 LOG4 log_alfabeam: ALFABEAM 3 9.872509829392563 20.742497690950195 2011-Dec-13 05:08:25 LOG4 log_alfabeam: ALFABEAM 4 9.865333816227325 20.774082344574310 2011-Dec-13 05:08:25 LOG4 log_alfabeam: ALFABEAM 5 9.860497820791748 20.708962131095497 2011-Dec-13 05:08:25 LOG4 log_alfabeam: ALFABEAM 6 9.863014302483228 20.614947861595738 2011-Dec-13 05:08:25 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-13 05:08:25 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-13 05:08:25 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-13 05:08:25 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_129 2011-Dec-13 05:08:25 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-13 05:08:25 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-13 05:08:25 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-13 05:08:25 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-13 05:08:25 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-13 05:08:25 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-13 05:08:25 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-13 05:08:25 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-13 05:08:25 LOG3 take_mock_data: PSET configuration: patternid=134700060 2011-Dec-13 05:08:25 LOG3 take_mock_data: PSET configuration: scanid=134700062 2011-Dec-13 05:08:25 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-13 05:08:25 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-13 05:08:25 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-13 05:08:25 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456365503.0 2011-Dec-13 05:08:25 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306365503.0 2011-Dec-13 05:08:25 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-13 05:08:25 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-13 05:08:25 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_129:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=134700060:scanid=134700062:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456365503.0:topobfreqhz=1306365503.0:filetype=1 2011-Dec-13 05:08:25 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-13 05:08:25 LOG5 begin_task: Level: (5) ID = <10180> Status = 0 0 0 0 ok 2011-Dec-13 05:08:25 LOG4 from_mock: From MOCK: psetok 2011-Dec-13 05:08:25 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-13 05:08:25 LOG5 end_task: Level: (5) ID = <10180> Status = 0 0 0 0 ok 2011-Dec-13 05:08:25 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-13 05:08:25 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-13 05:08:25 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-13 05:08:25 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-13 05:08:25 LOG5 begin_task: Level: (5) ID = <10181> Status = 0 0 0 0 ok 2011-Dec-13 05:08:25 LOG4 from_mock: From MOCK: starok 2011-Dec-13 05:08:25 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-13 05:08:25 LOG5 end_task: Level: (5) ID = <10181> Status = 0 0 0 0 ok 2011-Dec-13 05:08:25 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-13 05:08:25 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134700062 2011-Dec-13 05:08:25 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-13 05:08:25 LOG5 begin_task: Level: (5) ID = <10182> Status = 0 0 0 0 ok 2011-Dec-13 05:08:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 05:08:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-13 05:08:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32906.00 2011-Dec-13 05:08:26 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-13 05:08:26 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-13 05:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.578 (still bad) 2011-Dec-13 05:08:28 INFO2 got_mock_message: Mock spectrometer start file number is 01000 2011-Dec-13 05:08:28 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-13 05:08:28 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-13 05:08:28 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-13 05:08:28 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-13 05:08:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-13 05:08:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-13 05:08:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-13 05:08:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-13 05:08:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-13 05:08:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-13 05:08:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-13 05:08:28 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-13 05:08:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:08:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:08:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:08:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:08:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:08:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:08:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:08:31 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:08:31.01 2011-Dec-13 05:08:31 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323767311.01 Tue Dec 13 05:08:31 2011 2011-Dec-13 05:08:31 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-13 05:08:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.365503 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 05:08:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.365503 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 05:08:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.365503 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 05:08:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.365503 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 05:08:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.365503 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 05:08:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.365503 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 05:08:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.365503 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 05:08:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.365503 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 05:08:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.365503 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 05:08:31 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-13 05:08:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 05:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.132 (still bad) 2011-Dec-13 05:08:37 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-13 05:08:37 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-13 05:08:37 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-13 05:08:37 LOG5 end_task: Level: (5) ID = <10182> Status = 0 0 0 0 ok 2011-Dec-13 05:08:37 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-13 05:08:37 LOG5 end_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2011-Dec-13 05:08:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-13 05:08:37 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-13 05:08:37 LOG5 finish_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2011-Dec-13 05:08:37 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-13 05:08:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 05:08:37 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-13 05:08:37 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2011-Dec-13 05:08:37 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-13 05:08:37 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 123.31 and ZA = 4.20 2011-Dec-13 05:08:37 LOG3 track_source: Calling 'track_source AGES3193_p3_129 123.31 4.2008700782 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-13 05:08:37 START begin_task: Starting task 'sending tracking commands' 2011-Dec-13 05:08:37 LOG5 begin_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2011-Dec-13 05:08:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_129} INFO {Slewing to source 'AGES3193_p3_129' ...} 2011-Dec-13 05:08:37 INFO1 track_source: Starting to track AGES3193_p3_129 2011-Dec-13 05:08:37 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_129" 2011-Dec-13 05:08:37 LOG3 vw_send: To DATATAKING: set ra 123.31 2011-Dec-13 05:08:37 LOG3 vw_send: To DATATAKING: set dec 4.2008700782 2011-Dec-13 05:08:37 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-13 05:08:37 LOG3 vw_send: To DATATAKING: pnt tr 123.31 4.2008700782 -CF 2011-Dec-13 05:08:37 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 05:08:37 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-13 05:08:37 LOG5 finish_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2011-Dec-13 05:08:37 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-13 05:08:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 05:08:37 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-13 05:08:37 LOG5 end_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2011-Dec-13 05:08:37 LOG1 fixed_driftmap: Parameters: HA = +00:15:00.1 Start = 10:08:41.6 LST = 10:08:25.0 diff = 16.7 secs 2011-Dec-13 05:08:37 INFO2 fixed_driftmap: Waiting 14.7 seconds for RA 9:53:42 2011-Dec-13 05:08:37 INFO2 lstwait: Waiting for 14.7 secs from LST 10:08:25 to LST 10:08:40 ... 2011-Dec-13 05:08:37 LOG4 send_obs_status: To obs_status: <1> TASKTIME 14.657347168360214 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-13 05:08:37 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-13 05:08:37 LOG5 begin_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2011-Dec-13 05:08:37 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_129" 2011-Dec-13 05:08:37 LOG4 got_cormsg: From DATATAKING: set ra 123.31 2011-Dec-13 05:08:37 LOG4 got_cormsg: From DATATAKING: set dec 4.2008700782 2011-Dec-13 05:08:37 LOG4 got_cormsg: From DATATAKING: vw% 123.31 2011-Dec-13 05:08:37 LOG4 got_cormsg: From DATATAKING: vw% 4.2008700782 2011-Dec-13 05:08:37 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:08:37 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-13 05:08:37 LOG4 got_cormsg: From DATATAKING: pnt tr 123.31 4.2008700782 -CF 2011-Dec-13 05:08:37 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 05:08:37 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-13 05:08:37 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.132 (still bad) 2011-Dec-13 05:08:52 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-13 05:08:52 LOG5 end_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2011-Dec-13 05:08:52 LOG4 lstwait: Finished waiting 0.35 seconds late 2011-Dec-13 05:08:52 INFO3 lstwait: Finished waiting 2011-Dec-13 05:08:52 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-13 05:08:52 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-13 05:08:52 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-13 05:08:52 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-13 05:08:52 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-13 05:08:52 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-13 05:08:52 LOG5 begin_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2011-Dec-13 05:08:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-13 05:08:52 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-13 05:08:52 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-13 05:08:52 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-13 05:08:52 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-13 05:08:52 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_129 2011-Dec-13 05:08:52 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-13 05:08:52 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-13 05:08:52 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-13 05:08:52 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-13 05:08:52 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-13 05:08:52 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-13 05:08:52 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-13 05:08:52 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-13 05:08:52 LOG3 take_mock_data: PSET configuration: patternid=134700063 2011-Dec-13 05:08:52 LOG3 take_mock_data: PSET configuration: scanid=134700063 2011-Dec-13 05:08:52 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-13 05:08:52 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-13 05:08:52 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-13 05:08:52 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456365503.0 2011-Dec-13 05:08:52 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306365503.0 2011-Dec-13 05:08:52 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-13 05:08:52 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-13 05:08:52 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_129:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=134700063:scanid=134700063:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456365503.0:topobfreqhz=1306365503.0:filetype=1 2011-Dec-13 05:08:52 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-13 05:08:52 LOG5 begin_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2011-Dec-13 05:08:52 LOG4 from_mock: From MOCK: psetok 2011-Dec-13 05:08:52 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-13 05:08:52 LOG5 end_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2011-Dec-13 05:08:52 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-13 05:08:52 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-13 05:08:52 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-13 05:08:52 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-13 05:08:52 LOG5 begin_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2011-Dec-13 05:08:52 LOG4 from_mock: From MOCK: starok 2011-Dec-13 05:08:52 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-13 05:08:52 LOG5 end_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2011-Dec-13 05:08:52 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-13 05:08:52 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 134700063 2011-Dec-13 05:08:53 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-13 05:08:53 LOG5 begin_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2011-Dec-13 05:08:53 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-13 05:08:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 05:08:53 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-13 05:08:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-13 05:08:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32934.00 2011-Dec-13 05:08:54 INFO2 got_mock_message: Mock spectrometer start file number is 01100 2011-Dec-13 05:08:54 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-13 05:08:54 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2011-Dec-13 05:08:54 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-13 05:08:54 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-13 05:08:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-13 05:08:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-13 05:08:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-13 05:08:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-13 05:08:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-13 05:08:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-13 05:08:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-13 05:08:54 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-13 05:08:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 05:08:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 05:08:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 05:08:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 05:08:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 05:08:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 05:08:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 05:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.365503 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 05:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.365503 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 05:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.365503 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 05:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.365503 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 05:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.365503 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 05:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.365503 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 05:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.365503 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 05:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.365503 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 05:08:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.365503 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 05:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.135 (still bad) 2011-Dec-13 05:08:57 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:08:57.01 2011-Dec-13 05:08:57 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323767337.01 Tue Dec 13 05:08:57 2011 2011-Dec-13 05:08:57 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-13 05:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.142 (still bad) 2011-Dec-13 05:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.133 (still bad) 2011-Dec-13 05:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.132 (still bad) 2011-Dec-13 05:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.136 (still bad) 2011-Dec-13 05:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2011-Dec-13 05:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.134 (still bad) 2011-Dec-13 05:09:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-13 05:09:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.104 1.090 1.144 0.941 2011-Dec-13 05:09:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 1.014 1.088 1.120 2011-Dec-13 05:09:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.867 1.118 0.935 1.108 2011-Dec-13 05:09:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.070 0.026 0.932 0.027 2011-Dec-13 05:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.137 (still bad) 2011-Dec-13 05:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.134 (still bad) 2011-Dec-13 05:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.136 (still bad) 2011-Dec-13 05:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.136 (still bad) 2011-Dec-13 05:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.134 (still bad) 2011-Dec-13 05:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2011-Dec-13 05:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.136 (still bad) 2011-Dec-13 05:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-13 05:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2011-Dec-13 05:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2011-Dec-13 05:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2011-Dec-13 05:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.152 (still bad) 2011-Dec-13 05:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.149 (still bad) 2011-Dec-13 05:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2011-Dec-13 05:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.148 (still bad) 2011-Dec-13 05:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2011-Dec-13 05:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2011-Dec-13 05:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.155 (still bad) 2011-Dec-13 05:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.149 (still bad) 2011-Dec-13 05:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.152 (still bad) 2011-Dec-13 05:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.160 (still bad) 2011-Dec-13 05:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.163 (still bad) 2011-Dec-13 05:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.169 (still bad) 2011-Dec-13 05:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.179 (still bad) 2011-Dec-13 05:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.169 (still bad) 2011-Dec-13 05:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.160 (still bad) 2011-Dec-13 05:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.158 (still bad) 2011-Dec-13 05:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.146 (still bad) 2011-Dec-13 05:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.143 (still bad) 2011-Dec-13 05:10:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-13 05:10:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.093 1.145 0.941 2011-Dec-13 05:10:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 1.013 1.086 1.120 2011-Dec-13 05:10:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.867 1.118 0.935 1.108 2011-Dec-13 05:10:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 0.026 0.936 0.027 2011-Dec-13 05:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.136 (still bad) 2011-Dec-13 05:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.132 (still bad) 2011-Dec-13 05:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.136 (still bad) 2011-Dec-13 05:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.133 (still bad) 2011-Dec-13 05:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2011-Dec-13 05:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2011-Dec-13 05:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2011-Dec-13 05:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.131 (still bad) 2011-Dec-13 05:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2011-Dec-13 05:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.133 (still bad) 2011-Dec-13 05:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2011-Dec-13 05:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.139 (still bad) 2011-Dec-13 05:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.132 (still bad) 2011-Dec-13 05:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.132 (still bad) 2011-Dec-13 05:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2011-Dec-13 05:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.134 (still bad) 2011-Dec-13 05:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2011-Dec-13 05:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.142 (still bad) 2011-Dec-13 05:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.134 (still bad) 2011-Dec-13 05:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.133 (still bad) 2011-Dec-13 05:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-13 05:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.132 (still bad) 2011-Dec-13 05:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.133 (still bad) 2011-Dec-13 05:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-13 05:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-13 05:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.134 (still bad) 2011-Dec-13 05:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-13 05:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.134 (still bad) 2011-Dec-13 05:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.133 (still bad) 2011-Dec-13 05:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.140 (still bad) 2011-Dec-13 05:11:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-13 05:11:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.098 1.084 1.133 0.932 2011-Dec-13 05:11:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 1.005 1.084 1.111 2011-Dec-13 05:11:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.862 1.109 0.930 1.100 2011-Dec-13 05:11:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.026 0.925 0.026 2011-Dec-13 05:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.130 (still bad) 2011-Dec-13 05:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.134 (still bad) 2011-Dec-13 05:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.133 (still bad) 2011-Dec-13 05:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2011-Dec-13 05:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2011-Dec-13 05:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-13 05:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.132 (still bad) 2011-Dec-13 05:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.136 (still bad) 2011-Dec-13 05:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.133 (still bad) 2011-Dec-13 05:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-13 05:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.141 (still bad) 2011-Dec-13 05:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.134 (still bad) 2011-Dec-13 05:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.133 (still bad) 2011-Dec-13 05:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2011-Dec-13 05:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.131 (still bad) 2011-Dec-13 05:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.131 (still bad) 2011-Dec-13 05:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2011-Dec-13 05:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2011-Dec-13 05:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.132 (still bad) 2011-Dec-13 05:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-13 05:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.133 (still bad) 2011-Dec-13 05:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2011-Dec-13 05:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2011-Dec-13 05:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2011-Dec-13 05:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.133 (still bad) 2011-Dec-13 05:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-13 05:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.133 (still bad) 2011-Dec-13 05:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2011-Dec-13 05:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.132 (still bad) 2011-Dec-13 05:12:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-13 05:12:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.097 1.084 1.133 0.931 2011-Dec-13 05:12:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 1.007 1.079 1.110 2011-Dec-13 05:12:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.862 1.106 0.930 1.098 2011-Dec-13 05:12:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.027 0.926 0.027 2011-Dec-13 05:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.133 (still bad) 2011-Dec-13 05:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.132 (still bad) 2011-Dec-13 05:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.131 (still bad) 2011-Dec-13 05:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2011-Dec-13 05:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.136 (still bad) 2011-Dec-13 05:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-13 05:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.136 (still bad) 2011-Dec-13 05:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-13 05:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2011-Dec-13 05:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-13 05:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-13 05:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.133 (still bad) 2011-Dec-13 05:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.133 (still bad) 2011-Dec-13 05:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2011-Dec-13 05:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.133 (still bad) 2011-Dec-13 05:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2011-Dec-13 05:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-13 05:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2011-Dec-13 05:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2011-Dec-13 05:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.136 (still bad) 2011-Dec-13 05:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-13 05:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2011-Dec-13 05:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2011-Dec-13 05:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.136 (still bad) 2011-Dec-13 05:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2011-Dec-13 05:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.140 (still bad) 2011-Dec-13 05:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2011-Dec-13 05:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2011-Dec-13 05:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.140 (still bad) 2011-Dec-13 05:13:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-13 05:13:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.098 1.087 1.139 0.934 2011-Dec-13 05:13:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 1.007 1.084 1.115 2011-Dec-13 05:13:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.861 1.108 0.930 1.099 2011-Dec-13 05:13:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.027 0.928 0.028 2011-Dec-13 05:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2011-Dec-13 05:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.136 (still bad) 2011-Dec-13 05:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-13 05:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2011-Dec-13 05:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.136 (still bad) 2011-Dec-13 05:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2011-Dec-13 05:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2011-Dec-13 05:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.133 (still bad) 2011-Dec-13 05:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-13 05:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2011-Dec-13 05:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2011-Dec-13 05:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2011-Dec-13 05:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.136 (still bad) 2011-Dec-13 05:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.136 (still bad) 2011-Dec-13 05:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-13 05:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.136 (still bad) 2011-Dec-13 05:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2011-Dec-13 05:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2011-Dec-13 05:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2011-Dec-13 05:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.132 (still bad) 2011-Dec-13 05:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.133 (still bad) 2011-Dec-13 05:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2011-Dec-13 05:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2011-Dec-13 05:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.133 (still bad) 2011-Dec-13 05:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2011-Dec-13 05:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.133 (still bad) 2011-Dec-13 05:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-13 05:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2011-Dec-13 05:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2011-Dec-13 05:14:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-13 05:14:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.099 1.084 1.133 0.930 2011-Dec-13 05:14:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 1.006 1.082 1.110 2011-Dec-13 05:14:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.862 1.112 0.930 1.101 2011-Dec-13 05:14:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.027 0.927 0.028 2011-Dec-13 05:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.136 (still bad) 2011-Dec-13 05:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-13 05:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2011-Dec-13 05:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2011-Dec-13 05:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.136 (still bad) 2011-Dec-13 05:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-13 05:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2011-Dec-13 05:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-13 05:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-13 05:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2011-Dec-13 05:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2011-Dec-13 05:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-13 05:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2011-Dec-13 05:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.136 (still bad) 2011-Dec-13 05:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-13 05:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.140 (still bad) 2011-Dec-13 05:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-13 05:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.134 (still bad) 2011-Dec-13 05:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-13 05:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-13 05:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-13 05:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-13 05:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2011-Dec-13 05:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2011-Dec-13 05:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-13 05:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2011-Dec-13 05:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-13 05:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2011-Dec-13 05:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.134 (still bad) 2011-Dec-13 05:15:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2011-Dec-13 05:15:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 1.091 1.137 0.936 2011-Dec-13 05:15:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.919 1.011 1.083 1.111 2011-Dec-13 05:15:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.864 1.112 0.933 1.101 2011-Dec-13 05:15:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.028 0.929 0.028 2011-Dec-13 05:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.139 (still bad) 2011-Dec-13 05:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.138 (still bad) 2011-Dec-13 05:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-13 05:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.134 (still bad) 2011-Dec-13 05:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.144 (still bad) 2011-Dec-13 05:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.134 (still bad) 2011-Dec-13 05:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-13 05:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.139 (still bad) 2011-Dec-13 05:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-13 05:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.143 (still bad) 2011-Dec-13 05:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-13 05:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.145 (still bad) 2011-Dec-13 05:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.138 (still bad) 2011-Dec-13 05:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-13 05:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.140 (still bad) 2011-Dec-13 05:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.138 (still bad) 2011-Dec-13 05:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.145 (still bad) 2011-Dec-13 05:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.133 (still bad) 2011-Dec-13 05:16:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2011-Dec-13 05:16:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.098 1.087 1.137 0.936 2011-Dec-13 05:16:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.919 1.010 1.086 1.113 2011-Dec-13 05:16:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.862 1.113 0.930 1.100 2011-Dec-13 05:16:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.028 0.929 0.028 2011-Dec-13 05:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.144 (still bad) 2011-Dec-13 05:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.138 (still bad) 2011-Dec-13 05:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.148 (still bad) 2011-Dec-13 05:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.140 (still bad) 2011-Dec-13 05:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.141 (still bad) 2011-Dec-13 05:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.146 (still bad) 2011-Dec-13 05:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-13 05:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.134 (still bad) 2011-Dec-13 05:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.134 (still bad) 2011-Dec-13 05:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.134 (still bad) 2011-Dec-13 05:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.143 (still bad) 2011-Dec-13 05:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.132 (still bad) 2011-Dec-13 05:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.133 (still bad) 2011-Dec-13 05:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-13 05:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-13 05:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.134 (still bad) 2011-Dec-13 05:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:17:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2011-Dec-13 05:17:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.096 1.083 1.134 0.931 2011-Dec-13 05:17:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.913 1.006 1.083 1.111 2011-Dec-13 05:17:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.861 1.113 0.934 1.102 2011-Dec-13 05:17:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.028 0.927 0.029 2011-Dec-13 05:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.145 (still bad) 2011-Dec-13 05:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.136 (still bad) 2011-Dec-13 05:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.133 (still bad) 2011-Dec-13 05:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.137 (still bad) 2011-Dec-13 05:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.135 (still bad) 2011-Dec-13 05:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.137 (still bad) 2011-Dec-13 05:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.145 (still bad) 2011-Dec-13 05:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.136 (still bad) 2011-Dec-13 05:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.134 (still bad) 2011-Dec-13 05:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.137 (still bad) 2011-Dec-13 05:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.137 (still bad) 2011-Dec-13 05:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.135 (still bad) 2011-Dec-13 05:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.144 (still bad) 2011-Dec-13 05:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.134 (still bad) 2011-Dec-13 05:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.133 (still bad) 2011-Dec-13 05:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.135 (still bad) 2011-Dec-13 05:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.133 (still bad) 2011-Dec-13 05:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.134 (still bad) 2011-Dec-13 05:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.143 (still bad) 2011-Dec-13 05:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.132 (still bad) 2011-Dec-13 05:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.132 (still bad) 2011-Dec-13 05:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.136 (still bad) 2011-Dec-13 05:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.134 (still bad) 2011-Dec-13 05:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.136 (still bad) 2011-Dec-13 05:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.143 (still bad) 2011-Dec-13 05:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2011-Dec-13 05:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2011-Dec-13 05:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2011-Dec-13 05:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2011-Dec-13 05:18:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-13 05:18:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.098 1.086 1.134 0.935 2011-Dec-13 05:18:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 1.007 1.084 1.113 2011-Dec-13 05:18:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.864 1.119 0.931 1.101 2011-Dec-13 05:18:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.029 0.928 0.020 2011-Dec-13 05:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.142 (still bad) 2011-Dec-13 05:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-13 05:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.135 (still bad) 2011-Dec-13 05:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.139 (still bad) 2011-Dec-13 05:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.134 (still bad) 2011-Dec-13 05:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.135 (still bad) 2011-Dec-13 05:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.140 (still bad) 2011-Dec-13 05:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.133 (still bad) 2011-Dec-13 05:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.132 (still bad) 2011-Dec-13 05:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-13 05:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.134 (still bad) 2011-Dec-13 05:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-13 05:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.141 (still bad) 2011-Dec-13 05:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.136 (still bad) 2011-Dec-13 05:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2011-Dec-13 05:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.139 (still bad) 2011-Dec-13 05:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.136 (still bad) 2011-Dec-13 05:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.136 (still bad) 2011-Dec-13 05:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.143 (still bad) 2011-Dec-13 05:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2011-Dec-13 05:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2011-Dec-13 05:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2011-Dec-13 05:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2011-Dec-13 05:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2011-Dec-13 05:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.142 (still bad) 2011-Dec-13 05:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2011-Dec-13 05:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2011-Dec-13 05:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2011-Dec-13 05:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2011-Dec-13 05:19:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-13 05:19:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 1.090 1.133 0.935 2011-Dec-13 05:19:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 1.018 1.088 1.118 2011-Dec-13 05:19:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.864 1.118 0.934 1.104 2011-Dec-13 05:19:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.020 0.928 0.021 2011-Dec-13 05:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.141 (still bad) 2011-Dec-13 05:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2011-Dec-13 05:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2011-Dec-13 05:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2011-Dec-13 05:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2011-Dec-13 05:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2011-Dec-13 05:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.142 (still bad) 2011-Dec-13 05:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2011-Dec-13 05:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2011-Dec-13 05:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.136 (still bad) 2011-Dec-13 05:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2011-Dec-13 05:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2011-Dec-13 05:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.144 (still bad) 2011-Dec-13 05:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2011-Dec-13 05:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2011-Dec-13 05:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.145 (still bad) 2011-Dec-13 05:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.145 (still bad) 2011-Dec-13 05:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.147 (still bad) 2011-Dec-13 05:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.157 (still bad) 2011-Dec-13 05:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.150 (still bad) 2011-Dec-13 05:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.150 (still bad) 2011-Dec-13 05:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.150 (still bad) 2011-Dec-13 05:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.148 (still bad) 2011-Dec-13 05:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.146 (still bad) 2011-Dec-13 05:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.153 (still bad) 2011-Dec-13 05:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.145 (still bad) 2011-Dec-13 05:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.141 (still bad) 2011-Dec-13 05:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.142 (still bad) 2011-Dec-13 05:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.137 (still bad) 2011-Dec-13 05:20:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.029 < 0.75)! 2011-Dec-13 05:20:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 1.088 1.136 0.936 2011-Dec-13 05:20:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 1.008 1.087 1.116 2011-Dec-13 05:20:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 1.119 0.937 1.106 2011-Dec-13 05:20:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.071 0.029 0.931 0.029 2011-Dec-13 05:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.144 (still bad) 2011-Dec-13 05:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.133 (still bad) 2011-Dec-13 05:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.134 (still bad) 2011-Dec-13 05:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.135 (still bad) 2011-Dec-13 05:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.134 (still bad) 2011-Dec-13 05:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.135 (still bad) 2011-Dec-13 05:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.136 (still bad) 2011-Dec-13 05:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.134 (still bad) 2011-Dec-13 05:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.135 (still bad) 2011-Dec-13 05:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.134 (still bad) 2011-Dec-13 05:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.135 (still bad) 2011-Dec-13 05:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.136 (still bad) 2011-Dec-13 05:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.137 (still bad) 2011-Dec-13 05:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.136 (still bad) 2011-Dec-13 05:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.136 (still bad) 2011-Dec-13 05:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.136 (still bad) 2011-Dec-13 05:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.134 (still bad) 2011-Dec-13 05:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.138 (still bad) 2011-Dec-13 05:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-13 05:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.133 (still bad) 2011-Dec-13 05:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-13 05:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.134 (still bad) 2011-Dec-13 05:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.133 (still bad) 2011-Dec-13 05:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.137 (still bad) 2011-Dec-13 05:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.135 (still bad) 2011-Dec-13 05:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.136 (still bad) 2011-Dec-13 05:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.135 (still bad) 2011-Dec-13 05:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.135 (still bad) 2011-Dec-13 05:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.136 (still bad) 2011-Dec-13 05:21:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.029 < 0.75)! 2011-Dec-13 05:21:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 1.088 1.137 0.937 2011-Dec-13 05:21:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.917 1.012 1.083 1.114 2011-Dec-13 05:21:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.865 1.117 0.935 1.104 2011-Dec-13 05:21:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.029 0.929 0.029 2011-Dec-13 05:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.135 (still bad) 2011-Dec-13 05:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.135 (still bad) 2011-Dec-13 05:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.135 (still bad) 2011-Dec-13 05:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.135 (still bad) 2011-Dec-13 05:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.137 (still bad) 2011-Dec-13 05:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.136 (still bad) 2011-Dec-13 05:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.136 (still bad) 2011-Dec-13 05:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.136 (still bad) 2011-Dec-13 05:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.136 (still bad) 2011-Dec-13 05:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.135 (still bad) 2011-Dec-13 05:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.135 (still bad) 2011-Dec-13 05:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.136 (still bad) 2011-Dec-13 05:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.134 (still bad) 2011-Dec-13 05:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.138 (still bad) 2011-Dec-13 05:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.138 (still bad) 2011-Dec-13 05:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.137 (still bad) 2011-Dec-13 05:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.138 (still bad) 2011-Dec-13 05:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.138 (still bad) 2011-Dec-13 05:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.135 (still bad) 2011-Dec-13 05:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.135 (still bad) 2011-Dec-13 05:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.136 (still bad) 2011-Dec-13 05:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.135 (still bad) 2011-Dec-13 05:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.145 (still bad) 2011-Dec-13 05:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.137 (still bad) 2011-Dec-13 05:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.137 (still bad) 2011-Dec-13 05:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.142 (still bad) 2011-Dec-13 05:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.139 (still bad) 2011-Dec-13 05:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.141 (still bad) 2011-Dec-13 05:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.149 (still bad) 2011-Dec-13 05:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.139 (still bad) 2011-Dec-13 05:22:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.029 < 0.75)! 2011-Dec-13 05:22:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.097 1.088 1.136 0.939 2011-Dec-13 05:22:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.917 1.010 1.083 1.114 2011-Dec-13 05:22:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.863 1.112 0.930 1.102 2011-Dec-13 05:22:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.029 0.927 0.029 2011-Dec-13 05:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.139 (still bad) 2011-Dec-13 05:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.134 (still bad) 2011-Dec-13 05:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.135 (still bad) 2011-Dec-13 05:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.144 (still bad) 2011-Dec-13 05:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2011-Dec-13 05:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2011-Dec-13 05:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2011-Dec-13 05:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2011-Dec-13 05:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2011-Dec-13 05:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.141 (still bad) 2011-Dec-13 05:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2011-Dec-13 05:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2011-Dec-13 05:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2011-Dec-13 05:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2011-Dec-13 05:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2011-Dec-13 05:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.141 (still bad) 2011-Dec-13 05:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.145 (still bad) 2011-Dec-13 05:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.147 (still bad) 2011-Dec-13 05:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.152 (still bad) 2011-Dec-13 05:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.162 (still bad) 2011-Dec-13 05:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.155 (still bad) 2011-Dec-13 05:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.155 (still bad) 2011-Dec-13 05:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.155 (still bad) 2011-Dec-13 05:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.147 (still bad) 2011-Dec-13 05:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.144 (still bad) 2011-Dec-13 05:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.147 (still bad) 2011-Dec-13 05:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.138 (still bad) 2011-Dec-13 05:23:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2011-Dec-13 05:23:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.095 1.082 1.135 0.935 2011-Dec-13 05:23:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 1.011 1.087 1.118 2011-Dec-13 05:23:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.863 1.114 0.931 1.101 2011-Dec-13 05:23:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.019 0.926 0.021 2011-Dec-13 05:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.136 (still bad) 2011-Dec-13 05:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2011-Dec-13 05:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2011-Dec-13 05:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2011-Dec-13 05:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-13 05:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.132 (still bad) 2011-Dec-13 05:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-13 05:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.134 (still bad) 2011-Dec-13 05:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.133 (still bad) 2011-Dec-13 05:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.137 (still bad) 2011-Dec-13 05:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.133 (still bad) 2011-Dec-13 05:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.133 (still bad) 2011-Dec-13 05:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.134 (still bad) 2011-Dec-13 05:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.134 (still bad) 2011-Dec-13 05:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2011-Dec-13 05:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.143 (still bad) 2011-Dec-13 05:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-13 05:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-13 05:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-13 05:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.143 (still bad) 2011-Dec-13 05:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.133 (still bad) 2011-Dec-13 05:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.132 (still bad) 2011-Dec-13 05:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.134 (still bad) 2011-Dec-13 05:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.134 (still bad) 2011-Dec-13 05:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.143 (still bad) 2011-Dec-13 05:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.133 (still bad) 2011-Dec-13 05:24:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2011-Dec-13 05:24:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 1.091 1.133 0.935 2011-Dec-13 05:24:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.917 1.013 1.084 1.114 2011-Dec-13 05:24:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.864 1.116 0.932 1.105 2011-Dec-13 05:24:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.028 0.926 0.028 2011-Dec-13 05:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-13 05:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.143 (still bad) 2011-Dec-13 05:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-13 05:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.134 (still bad) 2011-Dec-13 05:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.138 (still bad) 2011-Dec-13 05:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-13 05:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.146 (still bad) 2011-Dec-13 05:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.139 (still bad) 2011-Dec-13 05:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.133 (still bad) 2011-Dec-13 05:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-13 05:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.144 (still bad) 2011-Dec-13 05:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-13 05:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.134 (still bad) 2011-Dec-13 05:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.138 (still bad) 2011-Dec-13 05:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.146 (still bad) 2011-Dec-13 05:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-13 05:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-13 05:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.139 (still bad) 2011-Dec-13 05:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-13 05:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.138 (still bad) 2011-Dec-13 05:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.144 (still bad) 2011-Dec-13 05:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-13 05:25:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2011-Dec-13 05:25:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.097 1.086 1.133 0.934 2011-Dec-13 05:25:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.919 1.010 1.083 1.114 2011-Dec-13 05:25:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.863 1.114 0.932 1.103 2011-Dec-13 05:25:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.028 0.926 0.028 2011-Dec-13 05:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.134 (still bad) 2011-Dec-13 05:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.139 (still bad) 2011-Dec-13 05:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-13 05:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-13 05:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-13 05:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.134 (still bad) 2011-Dec-13 05:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.133 (still bad) 2011-Dec-13 05:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.146 (still bad) 2011-Dec-13 05:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.134 (still bad) 2011-Dec-13 05:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.139 (still bad) 2011-Dec-13 05:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.138 (still bad) 2011-Dec-13 05:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.146 (still bad) 2011-Dec-13 05:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-13 05:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.134 (still bad) 2011-Dec-13 05:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.134 (still bad) 2011-Dec-13 05:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.144 (still bad) 2011-Dec-13 05:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-13 05:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:26:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2011-Dec-13 05:26:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.097 1.087 1.134 0.935 2011-Dec-13 05:26:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 1.008 1.084 1.116 2011-Dec-13 05:26:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.863 1.113 0.934 1.103 2011-Dec-13 05:26:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.067 0.028 0.927 0.028 2011-Dec-13 05:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.148 (still bad) 2011-Dec-13 05:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.139 (still bad) 2011-Dec-13 05:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.138 (still bad) 2011-Dec-13 05:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.146 (still bad) 2011-Dec-13 05:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-13 05:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.138 (still bad) 2011-Dec-13 05:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.133 (still bad) 2011-Dec-13 05:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-13 05:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.144 (still bad) 2011-Dec-13 05:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.133 (still bad) 2011-Dec-13 05:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.132 (still bad) 2011-Dec-13 05:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.138 (still bad) 2011-Dec-13 05:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.134 (still bad) 2011-Dec-13 05:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.136 (still bad) 2011-Dec-13 05:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.134 (still bad) 2011-Dec-13 05:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.133 (still bad) 2011-Dec-13 05:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.134 (still bad) 2011-Dec-13 05:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.133 (still bad) 2011-Dec-13 05:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.135 (still bad) 2011-Dec-13 05:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.135 (still bad) 2011-Dec-13 05:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.134 (still bad) 2011-Dec-13 05:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.133 (still bad) 2011-Dec-13 05:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.135 (still bad) 2011-Dec-13 05:27:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.029 < 0.75)! 2011-Dec-13 05:27:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 1.092 1.133 0.937 2011-Dec-13 05:27:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 1.009 1.086 1.116 2011-Dec-13 05:27:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.865 1.116 0.936 1.105 2011-Dec-13 05:27:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.067 0.029 0.927 0.029 2011-Dec-13 05:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.136 (still bad) 2011-Dec-13 05:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.134 (still bad) 2011-Dec-13 05:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.134 (still bad) 2011-Dec-13 05:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.134 (still bad) 2011-Dec-13 05:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.139 (still bad) 2011-Dec-13 05:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-13 05:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.134 (still bad) 2011-Dec-13 05:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-13 05:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.135 (still bad) 2011-Dec-13 05:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.138 (still bad) 2011-Dec-13 05:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.137 (still bad) 2011-Dec-13 05:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.137 (still bad) 2011-Dec-13 05:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.134 (still bad) 2011-Dec-13 05:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.135 (still bad) 2011-Dec-13 05:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.138 (still bad) 2011-Dec-13 05:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.136 (still bad) 2011-Dec-13 05:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.136 (still bad) 2011-Dec-13 05:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.136 (still bad) 2011-Dec-13 05:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.137 (still bad) 2011-Dec-13 05:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.136 (still bad) 2011-Dec-13 05:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.136 (still bad) 2011-Dec-13 05:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.136 (still bad) 2011-Dec-13 05:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.135 (still bad) 2011-Dec-13 05:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.138 (still bad) 2011-Dec-13 05:28:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.029 < 0.75)! 2011-Dec-13 05:28:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.093 1.136 0.938 2011-Dec-13 05:28:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 1.012 1.088 1.119 2011-Dec-13 05:28:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.865 1.116 0.935 1.105 2011-Dec-13 05:28:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.067 0.029 0.929 0.029 2011-Dec-13 05:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.138 (still bad) 2011-Dec-13 05:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.140 (still bad) 2011-Dec-13 05:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.139 (still bad) 2011-Dec-13 05:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.138 (still bad) 2011-Dec-13 05:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.138 (still bad) 2011-Dec-13 05:28:47 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.137 (still bad) 2011-Dec-13 05:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.139 (still bad) 2011-Dec-13 05:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.140 (still bad) 2011-Dec-13 05:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.138 (still bad) 2011-Dec-13 05:28:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 05:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.139 (still bad) 2011-Dec-13 05:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.139 (still bad) 2011-Dec-13 05:28:58 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-13 05:28:58 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-13 05:28:58 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-13 05:28:58 LOG5 end_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2011-Dec-13 05:28:58 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-13 05:28:58 LOG5 end_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2011-Dec-13 05:28:58 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-13 05:28:58 LOG5 finish_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2011-Dec-13 05:28:58 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-13 05:28:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-13 05:28:58 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-13 05:28:58 LOG5 end_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2011-Dec-13 05:28:58 COMMAND run_command_line: EXECUTING command 34: 'ENDIF' 2011-Dec-13 05:28:58 COMMAND run_command_line: EXECUTING command 37: 'IF LSTSLEW(AGES3193_p3_131) < 103140 THEN' 2011-Dec-13 05:28:58 LOG3 is_if_valid: Current source data: up 106.4 8.6 UP - - 48 1.8 2011-Dec-13 05:28:58 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_131) < 103140 2011-Dec-13 05:28:58 INFO5 is_if_valid: Condition parsed as: 10.510359999999999 < 10.527777777777779 2011-Dec-13 05:28:58 COMMAND run_command_line: EXECUTING command 38: 'FIXEDDRIFT az=105.47 alfaangle=-85.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_131 ra=95300.00 dec=203800.00' 2011-Dec-13 05:28:58 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-13 05:28:59 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-13 05:28:59 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 105.47 -85.1 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_131 95300.00 203800.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-13 05:28:59 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-13 05:28:59 LOG5 begin_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2011-Dec-13 05:28:59 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_129' 2011-Dec-13 05:28:59 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-13 05:28:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_131} 2011-Dec-13 05:28:59 INFO3 fixed_driftmap: Sending telescope to Az = 105.47 and ZA = 9.23 2011-Dec-13 05:28:59 LOG3 track_source: Calling 'track_source AGES3193_p3_131 105.47 9.2268505520 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-13 05:28:59 START begin_task: Starting task 'sending tracking commands' 2011-Dec-13 05:28:59 LOG5 begin_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2011-Dec-13 05:28:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_131} INFO {Slewing to source 'AGES3193_p3_131' ...} 2011-Dec-13 05:28:59 INFO1 track_source: Starting to track AGES3193_p3_131 2011-Dec-13 05:28:59 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_131" 2011-Dec-13 05:28:59 LOG3 vw_send: To DATATAKING: set ra 105.47 2011-Dec-13 05:28:59 LOG3 vw_send: To DATATAKING: set dec 9.2268505520 2011-Dec-13 05:28:59 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-13 05:28:59 LOG3 vw_send: To DATATAKING: pnt tr 105.47 9.2268505520 -CF 2011-Dec-13 05:28:59 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 05:28:59 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-13 05:28:59 LOG5 finish_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2011-Dec-13 05:28:59 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-13 05:28:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 05:28:59 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-13 05:28:59 LOG5 end_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2011-Dec-13 05:28:59 START begin_task: Starting task 'rotate ALFA to -85.1 degrees' 2011-Dec-13 05:28:59 LOG5 begin_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2011-Dec-13 05:28:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -85.1 degrees ...} 2011-Dec-13 05:28:59 INFO2 rotate_alfa: ALFA commanded to -85.1 degrees 2011-Dec-13 05:28:59 LOG3 sock_errsend: To ALFAMOTOR: POSITION -85.1 REPLY 2011-Dec-13 05:28:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-13 05:28:59 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-13 05:28:59 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2011-Dec-13 05:28:59 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_131" 2011-Dec-13 05:28:59 LOG4 got_cormsg: From DATATAKING: set ra 105.47 2011-Dec-13 05:28:59 LOG4 got_cormsg: From DATATAKING: set dec 9.2268505520 2011-Dec-13 05:28:59 LOG4 got_cormsg: From DATATAKING: vw% 105.47 2011-Dec-13 05:28:59 LOG4 got_cormsg: From DATATAKING: vw% 9.2268505520 2011-Dec-13 05:28:59 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:28:59 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-13 05:28:59 LOG4 got_cormsg: From DATATAKING: pnt tr 105.47 9.2268505520 -CF 2011-Dec-13 05:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.139 (still bad) 2011-Dec-13 05:28:59 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 05:28:59 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-13 05:28:59 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:30:27 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-13 05:30:27 INFO3 alfa_motor: ALFA rotator in-position -85.10 degrees 2011-Dec-13 05:30:27 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-13 05:30:27 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2011-Dec-13 05:30:27 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-13 05:30:27 STOP finish_task: Finishing task 'rotate ALFA to -85.1 degrees' 2011-Dec-13 05:30:27 LOG5 finish_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2011-Dec-13 05:30:27 INFO2 finish_task: DONE finished configuration: rotating ALFA to -85.1 degrees 2011-Dec-13 05:30:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 05:30:27 STOP end_task: Finishing task 'rotate ALFA to -85.1 degrees' with status 'OK' 2011-Dec-13 05:30:27 LOG5 end_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2011-Dec-13 05:30:27 START begin_task: Starting task 'waiting on telescope' 2011-Dec-13 05:30:27 LOG5 begin_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2011-Dec-13 05:30:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-13 05:30:27 LOG3 waittrk: Start waittrk 5 2011-Dec-13 05:30:27 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-13 05:30:27 LOG5 begin_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2011-Dec-13 05:30:32 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-13 05:30:32 LOG5 end_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2011-Dec-13 05:30:32 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-13 05:30:32 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2011-Dec-13 05:31:10 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-13 05:31:10 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2011-Dec-13 05:31:10 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-13 05:31:10 INFO2 waittrk: Now tracking AGES3193_p3_131 2011-Dec-13 05:31:10 LOG4 waittrk: Current telescope position: Az = 105.27 ZA = 9.23 2011-Dec-13 05:31:10 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-13 05:31:10 LOG5 finish_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2011-Dec-13 05:31:10 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-13 05:31:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 05:31:10 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-13 05:31:10 LOG5 end_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2011-Dec-13 05:31:10 START begin_task: Starting task 'selecting calibration type' 2011-Dec-13 05:31:10 LOG5 begin_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2011-Dec-13 05:31:10 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-13 05:31:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-13 05:31:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 05:31:10 START begin_task: Starting task 'waiting on setcal' 2011-Dec-13 05:31:10 LOG5 begin_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2011-Dec-13 05:31:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-13 05:31:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 05:31:11 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:31:11 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-13 05:31:11 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-13 05:31:11 LOG5 end_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2011-Dec-13 05:31:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-13 05:31:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-13 05:31:11 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-13 05:31:11 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-13 05:31:11 LOG5 begin_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2011-Dec-13 05:31:11 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:31:11 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-13 05:31:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-13 05:31:11 LOG5 end_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2011-Dec-13 05:31:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-13 05:31:11 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-13 05:31:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-13 05:31:11 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-13 05:31:11 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-13 05:31:11 LOG5 begin_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2011-Dec-13 05:31:11 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-13 05:31:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-13 05:31:11 LOG5 end_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2011-Dec-13 05:31:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-13 05:31:11 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-13 05:31:11 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-13 05:31:11 LOG5 end_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2011-Dec-13 05:31:11 LOG5 dopset_later: Calling 'dopset_later 37.967635860173147' 2011-Dec-13 05:31:11 INFO3 dopset_later: Setting Doppler correction for 05:31:49 (38 seconds from now) 2011-Dec-13 05:31:11 LOG5 antvel: Calling 'antvel 105.470000 9.226851 F Heliocentric 37.967635860173147' 2011-Dec-13 05:31:11 LOG2 antvel: Transforming current Az = 105.47 ZA = 9.23 to apparent RA = 09:53:41.4 Dec = +20:34:23.4 2011-Dec-13 05:31:11 LOG2 antvel: Parameters to Doppler: Heliocentric 34309 2011 347 0.0 2011-Dec-13 05:31:11 INFO5 antvel: Computed antenna velocity: -26.45529 km/s 2011-Dec-13 05:31:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-26.4552881157 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-13 05:31:11 INFO4 dopset_gen: New sky frequencies: 1381.365328 1381.365328 1381.365328 1381.365328 1381.365328 1381.365328 1381.365328 1381.365328 1381.365328 2011-Dec-13 05:31:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.365328 sky0=1381.365328 sky1=1381.365328 sky2=1381.365328 sky3=1381.365328 sky4=1381.365328 sky5=1381.365328 sky6=1381.365328 sky7=1381.365328 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-13 05:31:11 LOG2 dopset_gen: Result from 'sky2syn': 1631.365328 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-13 05:31:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631365328.0} 2011-Dec-13 05:31:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 05:31:11 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-13 05:31:11 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-13 05:31:11 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:26.6 Dec = +20:37:46.9 2011-Dec-13 05:31:11 LOG3 track_source: Calling 'track_source AGES3193_p3_131 095226.6 203746.9 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-13 05:31:11 START begin_task: Starting task 'sending tracking commands' 2011-Dec-13 05:31:11 LOG5 begin_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2011-Dec-13 05:31:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_131} INFO {Slewing to source 'AGES3193_p3_131' ...} 2011-Dec-13 05:31:11 INFO1 track_source: Starting to track AGES3193_p3_131 2011-Dec-13 05:31:11 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_131" 2011-Dec-13 05:31:11 LOG3 vw_send: To DATATAKING: set ra 095226.6 2011-Dec-13 05:31:11 LOG3 vw_send: To DATATAKING: set dec 203746.9 2011-Dec-13 05:31:11 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-13 05:31:11 LOG3 vw_send: To DATATAKING: pnt tr 095226.6 203746.9 -CJ 2011-Dec-13 05:31:11 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 05:31:11 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-13 05:31:11 LOG5 finish_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2011-Dec-13 05:31:11 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-13 05:31:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 05:31:11 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-13 05:31:11 LOG5 end_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2011-Dec-13 05:31:12 START begin_task: Starting task 'waiting on telescope' 2011-Dec-13 05:31:12 LOG5 begin_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2011-Dec-13 05:31:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-13 05:31:12 LOG3 waittrk: Start waittrk 5 2011-Dec-13 05:31:12 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-13 05:31:12 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2011-Dec-13 05:31:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631365328.0} 2011-Dec-13 05:31:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 05:31:12 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:31:12 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_131" 2011-Dec-13 05:31:12 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:31:12 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:31:12 LOG4 got_cormsg: From DATATAKING: set ra 095226.6 2011-Dec-13 05:31:12 LOG4 got_cormsg: From DATATAKING: set dec 203746.9 2011-Dec-13 05:31:12 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-13 05:31:12 LOG4 got_cormsg: From DATATAKING: pnt tr 095226.6 203746.9 -CJ 2011-Dec-13 05:31:12 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 05:31:12 LOG4 got_cormsg: From DATATAKING: 095226.6 2011-Dec-13 05:31:12 LOG4 got_cormsg: From DATATAKING: vw% 203746.9 2011-Dec-13 05:31:12 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2011-Dec-13 05:31:17 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-13 05:31:17 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2011-Dec-13 05:31:17 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-13 05:31:17 LOG5 begin_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2011-Dec-13 05:31:19 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-13 05:31:19 LOG5 end_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2011-Dec-13 05:31:19 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-13 05:31:19 INFO2 waittrk: Now tracking AGES3193_p3_131 2011-Dec-13 05:31:19 LOG4 waittrk: Current telescope position: Az = 105.23 ZA = 9.24 2011-Dec-13 05:31:19 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-13 05:31:19 LOG5 finish_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2011-Dec-13 05:31:19 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-13 05:31:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 05:31:19 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-13 05:31:19 LOG5 end_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2011-Dec-13 05:31:19 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-13 05:31:19 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2011-Dec-13 05:31:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-13 05:31:19 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-13 05:31:19 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-13 05:31:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-13 05:31:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 05:31:19 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-13 05:31:19 LOG5 begin_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2011-Dec-13 05:31:19 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-13 05:31:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 05:31:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:31:22 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-13 05:31:22 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-13 05:31:22 LOG5 end_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2011-Dec-13 05:31:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-13 05:31:22 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-13 05:31:22 LOG5 begin_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2011-Dec-13 05:31:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-13 05:31:22 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-13 05:31:22 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-13 05:31:22 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-13 05:31:22 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-13 05:31:22 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-13 05:31:22 LOG5 begin_task: Level: (5) ID = <10207> Status = 0 0 0 0 ok 2011-Dec-13 05:31:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-13 05:31:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:31:22 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 8 6 dB 2011-Dec-13 05:31:22 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 3 4 dB 2011-Dec-13 05:31:22 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 3 dB 2011-Dec-13 05:31:22 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2011-Dec-13 05:31:22 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-13 05:31:22 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-13 05:31:22 LOG5 end_task: Level: (5) ID = <10207> Status = 0 0 0 0 ok 2011-Dec-13 05:31:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.901 1.107 ALFA beam 1: 0.916 0.916 2011-Dec-13 05:31:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.922 1.011 ALFA beam 3: 1.081 0.919 2011-Dec-13 05:31:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.876 0.944 ALFA beam 5: 0.988 0.879 2011-Dec-13 05:31:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.901 0.014 ALFA beam 7: 0.981 0.014 2011-Dec-13 05:31:23 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-13 05:31:23 LOG5 finish_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2011-Dec-13 05:31:23 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-13 05:31:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 05:31:23 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-13 05:31:23 LOG5 end_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2011-Dec-13 05:31:23 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-13 05:31:23 LOG5 begin_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2011-Dec-13 05:31:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-13 05:31:23 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-13 05:31:23 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-13 05:31:23 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-13 05:31:23 LOG5 begin_task: Level: (5) ID = <10209> Status = 0 0 0 0 ok 2011-Dec-13 05:31:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-13 05:31:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.901 1.107 0.916 0.916 2011-Dec-13 05:31:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.922 1.011 1.081 0.919 2011-Dec-13 05:31:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.876 0.944 0.988 0.879 2011-Dec-13 05:31:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.901 0.014 0.981 0.014 2011-Dec-13 05:31:28 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.9 28.0 B 30.7 30.8 mn:A 0.1 0.0 B -0.2 -0.4 gn: 11 11 2011-Dec-13 05:31:28 INFO3 from_mock: From MOCK: b0s1g0 rms:A 28.6 27.3 B 28.6 30.4 mn:A 0.2 -0.5 B -0.4 0.1 gn: 11 11 2011-Dec-13 05:31:28 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.8 28.8 B 32.7 28.7 mn:A 0.9 0.6 B 0.2 -0.0 gn: 7 11 2011-Dec-13 05:31:29 INFO3 from_mock: From MOCK: b1s1g0 rms:A 30.5 28.1 B 28.2 28.2 mn:A -0.1 -0.3 B 0.5 0.1 gn: 8 9 2011-Dec-13 05:31:29 INFO3 from_mock: From MOCK: b2s0g0 rms:A 28.7 27.9 B 28.3 29.6 mn:A -0.2 -0.3 B 0.3 -0.0 gn: 10 11 2011-Dec-13 05:31:29 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.6 29.9 B 29.4 27.2 mn:A 0.2 -0.2 B 0.1 0.3 gn: 11 11 2011-Dec-13 05:31:29 INFO3 from_mock: From MOCK: b3s0g0 rms:A 29.2 29.0 B 31.6 28.2 mn:A 0.4 -0.3 B 0.0 -0.3 gn: 12 12 2011-Dec-13 05:31:29 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.8 30.1 B 30.4 31.6 mn:A -0.3 0.2 B 0.0 0.1 gn: 12 12 2011-Dec-13 05:31:29 INFO3 from_mock: From MOCK: b4s0g0 rms:A 31.1 30.1 B 29.0 29.1 mn:A -0.2 -0.3 B -0.4 0.0 gn: 13 11 2011-Dec-13 05:31:29 INFO3 from_mock: From MOCK: b4s1g0 rms:A 30.4 27.5 B 31.4 30.3 mn:A -0.2 -0.0 B -0.3 0.1 gn: 15 13 2011-Dec-13 05:31:29 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.8 28.7 B 31.4 31.3 mn:A 0.3 0.4 B -0.0 0.5 gn: 12 11 2011-Dec-13 05:31:29 INFO3 from_mock: From MOCK: b5s1g0 rms:A 27.1 26.8 B 28.1 27.9 mn:A -0.4 0.3 B 0.0 0.3 gn: 11 10 2011-Dec-13 05:31:29 INFO3 from_mock: From MOCK: b6s0g0 rms:A 33.1 30.3 B 15.4 15.8 mn:A -0.4 0.1 B 0.4 -0.5 gn: 13 31 2011-Dec-13 05:31:29 INFO3 from_mock: From MOCK: b6s1g0 rms:A 30.1 27.4 B 12.3 11.9 mn:A 0.6 0.5 B 0.1 0.1 gn: 13 31 2011-Dec-13 05:31:29 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-13 05:31:29 LOG5 end_task: Level: (5) ID = <10209> Status = 0 0 0 0 ok 2011-Dec-13 05:31:29 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-13 05:31:29 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-13 05:31:29 LOG5 finish_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2011-Dec-13 05:31:29 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-13 05:31:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 05:31:29 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-13 05:31:29 LOG5 end_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2011-Dec-13 05:31:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-13 05:31:29 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-13 05:31:29 LOG5 finish_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2011-Dec-13 05:31:29 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-13 05:31:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 05:31:29 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-13 05:31:29 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2011-Dec-13 05:31:29 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ep 2011-Dec-13 05:31:29 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ep 2011-Dec-13 05:31:29 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ep 2011-Dec-13 05:31:29 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ep 2011-Dec-13 05:31:29 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-13 05:31:29 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-13 05:31:29 LOG5 begin_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2011-Dec-13 05:31:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-13 05:31:29 START begin_task: Starting task 'selecting calibration type' 2011-Dec-13 05:31:29 LOG5 begin_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2011-Dec-13 05:31:29 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-13 05:31:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-13 05:31:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 05:31:29 START begin_task: Starting task 'waiting on setcal' 2011-Dec-13 05:31:29 LOG5 begin_task: Level: (5) ID = <10212> Status = 0 0 0 0 ok 2011-Dec-13 05:31:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ep' 2011-Dec-13 05:31:29 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-13 05:31:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 05:31:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:31:29 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-13 05:31:29 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-13 05:31:29 LOG5 end_task: Level: (5) ID = <10212> Status = 0 0 0 0 ok 2011-Dec-13 05:31:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-13 05:31:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-13 05:31:29 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-13 05:31:29 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-13 05:31:29 LOG5 begin_task: Level: (5) ID = <10213> Status = 0 0 0 0 ok 2011-Dec-13 05:31:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:31:29 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-13 05:31:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-13 05:31:29 LOG5 end_task: Level: (5) ID = <10213> Status = 0 0 0 0 ok 2011-Dec-13 05:31:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-13 05:31:29 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-13 05:31:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-13 05:31:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-13 05:31:29 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-13 05:31:29 LOG5 begin_task: Level: (5) ID = <10214> Status = 0 0 0 0 ok 2011-Dec-13 05:31:30 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-13 05:31:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-13 05:31:30 LOG5 end_task: Level: (5) ID = <10214> Status = 0 0 0 0 ok 2011-Dec-13 05:31:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-13 05:31:30 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-13 05:31:30 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-13 05:31:30 LOG5 end_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2011-Dec-13 05:31:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-13 05:31:30 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-13 05:31:30 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-13 05:31:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-13 05:31:30 LOG5 begin_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2011-Dec-13 05:31:30 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-13 05:31:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-13 05:31:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-13 05:31:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-13 05:31:30 LOG5 end_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2011-Dec-13 05:31:30 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-13 05:31:30 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-13 05:31:30 LOG5 begin_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2011-Dec-13 05:31:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-13 05:31:30 LOG5 log_alfabeam: Parameters: 9.8740555555555574 20.629694444444443 10.522698 2011.9506644675134 -85.100075 2011-Dec-13 05:31:30 LOG4 log_alfabeam: ALFABEAM 0 9.874055555555559 20.629694444444457 2011-Dec-13 05:31:30 LOG4 log_alfabeam: ALFABEAM 1 9.872177259930394 20.720453347586169 2011-Dec-13 05:31:30 LOG4 log_alfabeam: ALFABEAM 2 9.866772073763594 20.659767666957652 2011-Dec-13 05:31:30 LOG4 log_alfabeam: ALFABEAM 3 9.868696559611374 20.568708452163978 2011-Dec-13 05:31:30 LOG4 log_alfabeam: ALFABEAM 4 9.875994524186977 20.539558531857658 2011-Dec-13 05:31:30 LOG4 log_alfabeam: ALFABEAM 5 9.881339275969566 20.599724363754426 2011-Dec-13 05:31:30 LOG4 log_alfabeam: ALFABEAM 6 9.879445941613406 20.689561603271819 2011-Dec-13 05:31:30 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-13 05:31:30 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-13 05:31:30 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-13 05:31:30 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_131 2011-Dec-13 05:31:30 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-13 05:31:30 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-13 05:31:30 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-13 05:31:30 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-13 05:31:30 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-13 05:31:30 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-13 05:31:30 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-13 05:31:30 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-13 05:31:30 LOG3 take_mock_data: PSET configuration: patternid=134700063 2011-Dec-13 05:31:30 LOG3 take_mock_data: PSET configuration: scanid=134700064 2011-Dec-13 05:31:30 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-13 05:31:30 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-13 05:31:30 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-13 05:31:30 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456365328.0 2011-Dec-13 05:31:30 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306365328.0 2011-Dec-13 05:31:30 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-13 05:31:30 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-13 05:31:30 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_131:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=134700063:scanid=134700064:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456365328.0:topobfreqhz=1306365328.0:filetype=1 2011-Dec-13 05:31:30 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-13 05:31:30 LOG5 begin_task: Level: (5) ID = <10217> Status = 0 0 0 0 ok 2011-Dec-13 05:31:30 LOG4 from_mock: From MOCK: psetok 2011-Dec-13 05:31:30 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-13 05:31:30 LOG5 end_task: Level: (5) ID = <10217> Status = 0 0 0 0 ok 2011-Dec-13 05:31:30 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-13 05:31:30 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-13 05:31:30 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-13 05:31:30 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-13 05:31:30 LOG5 begin_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2011-Dec-13 05:31:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20111213.a2048.0004.fits 2011-Dec-13 05:31:30 LOG4 from_mock: From MOCK: starok 2011-Dec-13 05:31:30 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-13 05:31:30 LOG5 end_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2011-Dec-13 05:31:30 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-13 05:31:30 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134700064 2011-Dec-13 05:31:31 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-13 05:31:31 LOG5 begin_task: Level: (5) ID = <10219> Status = 0 0 0 0 ok 2011-Dec-13 05:31:31 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111213.a2048.0004.fits} 2011-Dec-13 05:31:31 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-13 05:31:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 05:31:31 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-13 05:31:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-13 05:31:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 34292.00 2011-Dec-13 05:31:32 INFO2 got_mock_message: Mock spectrometer start file number is 01200 2011-Dec-13 05:31:32 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-13 05:31:32 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-13 05:31:32 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-13 05:31:32 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-13 05:31:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-13 05:31:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-13 05:31:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-13 05:31:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-13 05:31:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-13 05:31:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-13 05:31:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-13 05:31:32 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-13 05:31:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:31:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:31:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:31:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:31:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:31:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:31:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:31:35 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:31:35.01 2011-Dec-13 05:31:35 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323768695.01 Tue Dec 13 05:31:35 2011 2011-Dec-13 05:31:35 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-13 05:31:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.365328 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 05:31:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.365328 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 05:31:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.365328 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 05:31:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.365328 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 05:31:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.365328 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 05:31:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.365328 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 05:31:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.365328 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 05:31:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.365328 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 05:31:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.365328 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 05:31:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2011-Dec-13 05:31:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 05:31:40 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-13 05:31:41 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-13 05:31:41 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-13 05:31:41 LOG5 end_task: Level: (5) ID = <10219> Status = 0 0 0 0 ok 2011-Dec-13 05:31:41 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-13 05:31:41 LOG5 end_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2011-Dec-13 05:31:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-13 05:31:41 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-13 05:31:41 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-13 05:31:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-13 05:31:41 LOG5 begin_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2011-Dec-13 05:31:41 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-13 05:31:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-13 05:31:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-13 05:31:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-13 05:31:41 LOG5 end_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2011-Dec-13 05:31:41 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-13 05:31:41 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-13 05:31:41 LOG5 begin_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2011-Dec-13 05:31:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-13 05:31:41 LOG5 log_alfabeam: Parameters: 9.8740555555555574 20.629694444444443 10.525761 2011.9506648160825 -85.100075 2011-Dec-13 05:31:41 LOG4 log_alfabeam: ALFABEAM 0 9.874055555555561 20.629694444444425 2011-Dec-13 05:31:41 LOG4 log_alfabeam: ALFABEAM 1 9.872169048062689 20.720418960838497 2011-Dec-13 05:31:41 LOG4 log_alfabeam: ALFABEAM 2 9.866769403022754 20.659639726655126 2011-Dec-13 05:31:41 LOG4 log_alfabeam: ALFABEAM 3 9.868701917624643 20.568617148044115 2011-Dec-13 05:31:41 LOG4 log_alfabeam: ALFABEAM 4 9.876002382960765 20.539591094909294 2011-Dec-13 05:31:41 LOG4 log_alfabeam: ALFABEAM 5 9.881341928393040 20.599851519423225 2011-Dec-13 05:31:41 LOG4 log_alfabeam: ALFABEAM 6 9.879440557129481 20.689658418051891 2011-Dec-13 05:31:41 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-13 05:31:41 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-13 05:31:41 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-13 05:31:41 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_131 2011-Dec-13 05:31:41 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-13 05:31:41 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-13 05:31:41 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-13 05:31:41 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-13 05:31:41 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-13 05:31:41 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-13 05:31:41 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-13 05:31:41 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-13 05:31:41 LOG3 take_mock_data: PSET configuration: patternid=134700063 2011-Dec-13 05:31:41 LOG3 take_mock_data: PSET configuration: scanid=134700065 2011-Dec-13 05:31:41 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-13 05:31:41 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-13 05:31:41 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-13 05:31:41 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456365328.0 2011-Dec-13 05:31:41 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306365328.0 2011-Dec-13 05:31:41 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-13 05:31:41 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-13 05:31:41 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_131:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=134700063:scanid=134700065:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456365328.0:topobfreqhz=1306365328.0:filetype=1 2011-Dec-13 05:31:41 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-13 05:31:41 LOG5 begin_task: Level: (5) ID = <10222> Status = 0 0 0 0 ok 2011-Dec-13 05:31:41 LOG4 from_mock: From MOCK: psetok 2011-Dec-13 05:31:41 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-13 05:31:41 LOG5 end_task: Level: (5) ID = <10222> Status = 0 0 0 0 ok 2011-Dec-13 05:31:41 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-13 05:31:41 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-13 05:31:41 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-13 05:31:41 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-13 05:31:41 LOG5 begin_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2011-Dec-13 05:31:41 LOG4 from_mock: From MOCK: starok 2011-Dec-13 05:31:41 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-13 05:31:41 LOG5 end_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2011-Dec-13 05:31:41 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-13 05:31:41 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134700065 2011-Dec-13 05:31:41 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-13 05:31:41 LOG5 begin_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2011-Dec-13 05:31:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 05:31:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-13 05:31:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 34302.00 2011-Dec-13 05:31:42 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-13 05:31:42 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-13 05:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.509 (still bad) 2011-Dec-13 05:31:44 INFO2 got_mock_message: Mock spectrometer start file number is 01300 2011-Dec-13 05:31:44 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-13 05:31:44 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-13 05:31:44 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-13 05:31:44 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-13 05:31:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-13 05:31:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-13 05:31:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-13 05:31:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-13 05:31:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-13 05:31:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-13 05:31:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-13 05:31:44 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-13 05:31:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:31:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:31:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:31:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:31:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:31:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:31:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:31:47 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:31:47.02 2011-Dec-13 05:31:47 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323768707.02 Tue Dec 13 05:31:47 2011 2011-Dec-13 05:31:47 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-13 05:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.365328 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 05:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.365328 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 05:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.365328 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 05:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.365328 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 05:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.365328 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 05:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.365328 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 05:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.365328 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 05:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.365328 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 05:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.365328 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 05:31:47 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-13 05:31:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 05:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-13 05:31:52 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-13 05:31:53 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-13 05:31:53 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-13 05:31:53 LOG5 end_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2011-Dec-13 05:31:53 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-13 05:31:53 LOG5 end_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2011-Dec-13 05:31:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-13 05:31:53 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-13 05:31:53 LOG5 finish_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2011-Dec-13 05:31:53 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-13 05:31:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 05:31:53 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-13 05:31:53 LOG5 end_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2011-Dec-13 05:31:53 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-13 05:31:53 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 105.47 and ZA = 9.23 2011-Dec-13 05:31:53 LOG3 track_source: Calling 'track_source AGES3193_p3_131 105.47 9.2268505520 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-13 05:31:53 START begin_task: Starting task 'sending tracking commands' 2011-Dec-13 05:31:53 LOG5 begin_task: Level: (3) ID = <10225> Status = 0 0 0 0 ok 2011-Dec-13 05:31:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_131} INFO {Slewing to source 'AGES3193_p3_131' ...} 2011-Dec-13 05:31:53 INFO1 track_source: Starting to track AGES3193_p3_131 2011-Dec-13 05:31:53 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_131" 2011-Dec-13 05:31:53 LOG3 vw_send: To DATATAKING: set ra 105.47 2011-Dec-13 05:31:53 LOG3 vw_send: To DATATAKING: set dec 9.2268505520 2011-Dec-13 05:31:53 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-13 05:31:53 LOG3 vw_send: To DATATAKING: pnt tr 105.47 9.2268505520 -CF 2011-Dec-13 05:31:53 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 05:31:53 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-13 05:31:53 LOG5 finish_task: Level: (3) ID = <10225> Status = 0 0 0 0 ok 2011-Dec-13 05:31:53 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-13 05:31:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 05:31:53 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-13 05:31:53 LOG5 end_task: Level: (3) ID = <10225> Status = 0 0 0 0 ok 2011-Dec-13 05:31:53 LOG1 fixed_driftmap: Parameters: HA = +00:38:00.2 Start = 10:31:41.7 LST = 10:31:44.8 diff = -3.0 secs 2011-Dec-13 05:31:53 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2011-Dec-13 05:31:53 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-13 05:31:53 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-13 05:31:53 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-13 05:31:53 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-13 05:31:53 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-13 05:31:53 LOG5 begin_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2011-Dec-13 05:31:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-13 05:31:53 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-13 05:31:53 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-13 05:31:53 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-13 05:31:53 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-13 05:31:53 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_131 2011-Dec-13 05:31:53 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-13 05:31:53 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-13 05:31:53 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-13 05:31:53 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-13 05:31:53 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-13 05:31:53 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-13 05:31:53 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-13 05:31:53 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-13 05:31:53 LOG3 take_mock_data: PSET configuration: patternid=134700066 2011-Dec-13 05:31:53 LOG3 take_mock_data: PSET configuration: scanid=134700066 2011-Dec-13 05:31:53 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-13 05:31:53 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-13 05:31:53 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-13 05:31:53 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456365328.0 2011-Dec-13 05:31:53 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306365328.0 2011-Dec-13 05:31:53 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-13 05:31:53 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-13 05:31:53 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_131:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=134700066:scanid=134700066:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456365328.0:topobfreqhz=1306365328.0:filetype=1 2011-Dec-13 05:31:53 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-13 05:31:53 LOG5 begin_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2011-Dec-13 05:31:53 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_131" 2011-Dec-13 05:31:53 LOG4 got_cormsg: From DATATAKING: set ra 105.47 2011-Dec-13 05:31:53 LOG4 got_cormsg: From DATATAKING: set dec 9.2268505520 2011-Dec-13 05:31:53 LOG4 from_mock: From MOCK: psetok 2011-Dec-13 05:31:53 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-13 05:31:53 LOG5 end_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2011-Dec-13 05:31:53 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-13 05:31:53 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-13 05:31:53 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-13 05:31:53 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-13 05:31:53 LOG5 begin_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2011-Dec-13 05:31:53 LOG4 got_cormsg: From DATATAKING: vw% 105.47 2011-Dec-13 05:31:53 LOG4 got_cormsg: From DATATAKING: vw% 9.2268505520 2011-Dec-13 05:31:53 LOG4 from_mock: From MOCK: starok 2011-Dec-13 05:31:53 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-13 05:31:53 LOG5 end_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2011-Dec-13 05:31:53 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-13 05:31:53 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 134700066 2011-Dec-13 05:31:54 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-13 05:31:54 LOG5 begin_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2011-Dec-13 05:31:54 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:31:54 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-13 05:31:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 05:31:54 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-13 05:31:54 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-13 05:31:54 LOG4 got_cormsg: From DATATAKING: pnt tr 105.47 9.2268505520 -CF 2011-Dec-13 05:31:54 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 05:31:54 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-13 05:31:54 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:31:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-13 05:31:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 34315.00 2011-Dec-13 05:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-13 05:31:56 INFO2 got_mock_message: Mock spectrometer start file number is 01400 2011-Dec-13 05:31:56 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-13 05:31:56 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1199.9 s 2011-Dec-13 05:31:56 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-13 05:31:56 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-13 05:31:56 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-13 05:31:56 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-13 05:31:56 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-13 05:31:56 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-13 05:31:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.365328 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 05:31:56 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-13 05:31:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.365328 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 05:31:56 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-13 05:31:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.365328 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 05:31:56 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-13 05:31:56 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-13 05:31:56 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 05:31:56 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 05:31:56 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 05:31:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.365328 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 05:31:56 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 05:31:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.365328 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 05:31:56 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 05:31:56 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 05:31:56 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 05:31:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.365328 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 05:31:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.365328 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 05:31:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.365328 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 05:31:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.365328 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 05:31:57 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2011-Dec-13 05:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-13 05:31:59 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:31:59.01 2011-Dec-13 05:31:59 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323768719.01 Tue Dec 13 05:31:59 2011 2011-Dec-13 05:31:59 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-13 05:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2011-Dec-13 05:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2011-Dec-13 05:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-13 05:32:05 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2011-Dec-13 05:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.100 (still bad) 2011-Dec-13 05:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-13 05:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2011-Dec-13 05:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.100 (still bad) 2011-Dec-13 05:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2011-Dec-13 05:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2011-Dec-13 05:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.096 (still bad) 2011-Dec-13 05:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.100 (still bad) 2011-Dec-13 05:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.096 (still bad) 2011-Dec-13 05:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-13 05:32:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-13 05:32:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.902 1.100 0.924 0.916 2011-Dec-13 05:32:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.921 1.006 1.081 0.919 2011-Dec-13 05:32:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.874 0.941 0.996 0.902 2011-Dec-13 05:32:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.902 0.028 0.982 0.020 2011-Dec-13 05:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.101 (still bad) 2011-Dec-13 05:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2011-Dec-13 05:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.101 (still bad) 2011-Dec-13 05:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.101 (still bad) 2011-Dec-13 05:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.101 (still bad) 2011-Dec-13 05:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.103 (still bad) 2011-Dec-13 05:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2011-Dec-13 05:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2011-Dec-13 05:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2011-Dec-13 05:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-13 05:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-13 05:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2011-Dec-13 05:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.105 (still bad) 2011-Dec-13 05:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.104 (still bad) 2011-Dec-13 05:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.108 (still bad) 2011-Dec-13 05:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.109 (still bad) 2011-Dec-13 05:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.106 (still bad) 2011-Dec-13 05:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.108 (still bad) 2011-Dec-13 05:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2011-Dec-13 05:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2011-Dec-13 05:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2011-Dec-13 05:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.100 (still bad) 2011-Dec-13 05:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.097 (still bad) 2011-Dec-13 05:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.100 (still bad) 2011-Dec-13 05:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-13 05:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-13 05:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2011-Dec-13 05:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-13 05:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2011-Dec-13 05:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2011-Dec-13 05:33:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-13 05:33:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.904 1.102 0.927 0.917 2011-Dec-13 05:33:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 1.006 1.091 0.928 2011-Dec-13 05:33:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.873 0.939 0.984 0.890 2011-Dec-13 05:33:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.902 0.026 0.983 0.026 2011-Dec-13 05:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2011-Dec-13 05:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2011-Dec-13 05:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2011-Dec-13 05:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2011-Dec-13 05:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2011-Dec-13 05:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.100 (still bad) 2011-Dec-13 05:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.096 (still bad) 2011-Dec-13 05:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2011-Dec-13 05:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.098 (still bad) 2011-Dec-13 05:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.096 (still bad) 2011-Dec-13 05:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.104 (still bad) 2011-Dec-13 05:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.095 (still bad) 2011-Dec-13 05:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.094 (still bad) 2011-Dec-13 05:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2011-Dec-13 05:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.095 (still bad) 2011-Dec-13 05:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.095 (still bad) 2011-Dec-13 05:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.097 (still bad) 2011-Dec-13 05:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.097 (still bad) 2011-Dec-13 05:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.097 (still bad) 2011-Dec-13 05:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.095 (still bad) 2011-Dec-13 05:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.096 (still bad) 2011-Dec-13 05:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.095 (still bad) 2011-Dec-13 05:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.095 (still bad) 2011-Dec-13 05:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2011-Dec-13 05:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2011-Dec-13 05:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.096 (still bad) 2011-Dec-13 05:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.096 (still bad) 2011-Dec-13 05:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2011-Dec-13 05:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-13 05:34:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-13 05:34:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 1.095 0.920 0.911 2011-Dec-13 05:34:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 1.002 1.077 0.916 2011-Dec-13 05:34:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.872 0.936 0.985 0.888 2011-Dec-13 05:34:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.901 0.027 0.981 0.027 2011-Dec-13 05:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-13 05:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-13 05:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-13 05:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-13 05:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.098 (still bad) 2011-Dec-13 05:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2011-Dec-13 05:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.098 (still bad) 2011-Dec-13 05:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.098 (still bad) 2011-Dec-13 05:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2011-Dec-13 05:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.098 (still bad) 2011-Dec-13 05:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2011-Dec-13 05:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2011-Dec-13 05:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2011-Dec-13 05:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2011-Dec-13 05:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2011-Dec-13 05:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2011-Dec-13 05:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.098 (still bad) 2011-Dec-13 05:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.094 (still bad) 2011-Dec-13 05:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.096 (still bad) 2011-Dec-13 05:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.098 (still bad) 2011-Dec-13 05:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2011-Dec-13 05:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2011-Dec-13 05:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.099 (still bad) 2011-Dec-13 05:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.096 (still bad) 2011-Dec-13 05:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.095 (still bad) 2011-Dec-13 05:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2011-Dec-13 05:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.095 (still bad) 2011-Dec-13 05:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2011-Dec-13 05:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2011-Dec-13 05:35:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2011-Dec-13 05:35:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.902 1.095 0.922 0.907 2011-Dec-13 05:35:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 1.000 1.076 0.916 2011-Dec-13 05:35:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.871 0.936 0.987 0.889 2011-Dec-13 05:35:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.902 0.028 0.981 0.028 2011-Dec-13 05:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.096 (still bad) 2011-Dec-13 05:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.094 (still bad) 2011-Dec-13 05:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.094 (still bad) 2011-Dec-13 05:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.104 (still bad) 2011-Dec-13 05:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.095 (still bad) 2011-Dec-13 05:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.094 (still bad) 2011-Dec-13 05:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2011-Dec-13 05:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.096 (still bad) 2011-Dec-13 05:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.096 (still bad) 2011-Dec-13 05:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2011-Dec-13 05:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-13 05:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-13 05:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-13 05:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-13 05:36:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-13 05:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.109 (still bad) 2011-Dec-13 05:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.102 (still bad) 2011-Dec-13 05:36:06 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.101 (still bad) 2011-Dec-13 05:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.105 (still bad) 2011-Dec-13 05:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.099 (still bad) 2011-Dec-13 05:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.101 (still bad) 2011-Dec-13 05:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-13 05:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-13 05:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2011-Dec-13 05:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-13 05:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2011-Dec-13 05:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2011-Dec-13 05:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.099 (still bad) 2011-Dec-13 05:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.094 (still bad) 2011-Dec-13 05:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.095 (still bad) 2011-Dec-13 05:36:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-13 05:36:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.904 1.095 0.922 0.912 2011-Dec-13 05:36:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.921 1.003 1.080 0.918 2011-Dec-13 05:36:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.873 0.937 0.989 0.889 2011-Dec-13 05:36:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.904 0.020 0.985 0.021 2011-Dec-13 05:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.094 (still bad) 2011-Dec-13 05:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.092 (still bad) 2011-Dec-13 05:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-13 05:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.089 (still bad) 2011-Dec-13 05:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.091 (still bad) 2011-Dec-13 05:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.092 (still bad) 2011-Dec-13 05:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.093 (still bad) 2011-Dec-13 05:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.092 (still bad) 2011-Dec-13 05:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.096 (still bad) 2011-Dec-13 05:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.094 (still bad) 2011-Dec-13 05:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.092 (still bad) 2011-Dec-13 05:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.095 (still bad) 2011-Dec-13 05:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.089 (still bad) 2011-Dec-13 05:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.089 (still bad) 2011-Dec-13 05:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2011-Dec-13 05:37:04 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 05:37:04.298 (seconds: 20224.298)!} 2011-Dec-13 05:37:04 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 05:37:04.298 (seconds: 20224.298)! 2011-Dec-13 05:37:05 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 20223.0 to 20224.0! 2011-Dec-13 05:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.094 (still bad) 2011-Dec-13 05:37:06 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (20223.0 - 20225.0)! 2011-Dec-13 05:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.092 (still bad) 2011-Dec-13 05:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2011-Dec-13 05:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.088 (still bad) 2011-Dec-13 05:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.090 (still bad) 2011-Dec-13 05:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.102 (still bad) 2011-Dec-13 05:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.091 (still bad) 2011-Dec-13 05:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.092 (still bad) 2011-Dec-13 05:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.093 (still bad) 2011-Dec-13 05:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.088 (still bad) 2011-Dec-13 05:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.091 (still bad) 2011-Dec-13 05:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.097 (still bad) 2011-Dec-13 05:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.089 (still bad) 2011-Dec-13 05:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.090 (still bad) 2011-Dec-13 05:37:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-13 05:37:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 1.093 0.923 0.910 2011-Dec-13 05:37:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.920 1.001 1.079 0.916 2011-Dec-13 05:37:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.873 0.938 0.988 0.889 2011-Dec-13 05:37:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.904 0.029 0.984 0.021 2011-Dec-13 05:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.092 (still bad) 2011-Dec-13 05:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.090 (still bad) 2011-Dec-13 05:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.100 (still bad) 2011-Dec-13 05:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.092 (still bad) 2011-Dec-13 05:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.089 (still bad) 2011-Dec-13 05:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.092 (still bad) 2011-Dec-13 05:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.092 (still bad) 2011-Dec-13 05:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.092 (still bad) 2011-Dec-13 05:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.100 (still bad) 2011-Dec-13 05:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.088 (still bad) 2011-Dec-13 05:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.091 (still bad) 2011-Dec-13 05:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.092 (still bad) 2011-Dec-13 05:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.087 (still bad) 2011-Dec-13 05:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.090 (still bad) 2011-Dec-13 05:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.101 (still bad) 2011-Dec-13 05:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.092 (still bad) 2011-Dec-13 05:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.093 (still bad) 2011-Dec-13 05:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.095 (still bad) 2011-Dec-13 05:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.090 (still bad) 2011-Dec-13 05:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.090 (still bad) 2011-Dec-13 05:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.102 (still bad) 2011-Dec-13 05:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.092 (still bad) 2011-Dec-13 05:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.091 (still bad) 2011-Dec-13 05:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2011-Dec-13 05:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.090 (still bad) 2011-Dec-13 05:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.094 (still bad) 2011-Dec-13 05:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.031 and 1.102 (still bad) 2011-Dec-13 05:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.091 (still bad) 2011-Dec-13 05:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.089 (still bad) 2011-Dec-13 05:38:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-13 05:38:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.906 1.093 0.923 0.910 2011-Dec-13 05:38:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.919 1.002 1.081 0.916 2011-Dec-13 05:38:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.872 0.935 0.987 0.889 2011-Dec-13 05:38:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.903 0.024 0.983 0.025 2011-Dec-13 05:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.092 (still bad) 2011-Dec-13 05:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.090 (still bad) 2011-Dec-13 05:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.099 (still bad) 2011-Dec-13 05:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.089 (still bad) 2011-Dec-13 05:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.089 (still bad) 2011-Dec-13 05:38:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.092 (still bad) 2011-Dec-13 05:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.089 (still bad) 2011-Dec-13 05:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.090 (still bad) 2011-Dec-13 05:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.090 (still bad) 2011-Dec-13 05:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.088 (still bad) 2011-Dec-13 05:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.090 (still bad) 2011-Dec-13 05:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.091 (still bad) 2011-Dec-13 05:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.090 (still bad) 2011-Dec-13 05:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.090 (still bad) 2011-Dec-13 05:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.093 (still bad) 2011-Dec-13 05:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.089 (still bad) 2011-Dec-13 05:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.089 (still bad) 2011-Dec-13 05:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.091 (still bad) 2011-Dec-13 05:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.090 (still bad) 2011-Dec-13 05:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.092 (still bad) 2011-Dec-13 05:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.095 (still bad) 2011-Dec-13 05:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.093 (still bad) 2011-Dec-13 05:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.092 (still bad) 2011-Dec-13 05:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.095 (still bad) 2011-Dec-13 05:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.094 (still bad) 2011-Dec-13 05:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2011-Dec-13 05:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.099 (still bad) 2011-Dec-13 05:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.096 (still bad) 2011-Dec-13 05:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-13 05:39:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-13 05:39:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.909 1.096 0.923 0.911 2011-Dec-13 05:39:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 1.001 1.077 0.915 2011-Dec-13 05:39:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.871 0.935 0.986 0.888 2011-Dec-13 05:39:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.901 0.021 0.981 0.020 2011-Dec-13 05:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.095 (still bad) 2011-Dec-13 05:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.094 (still bad) 2011-Dec-13 05:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.093 (still bad) 2011-Dec-13 05:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.093 (still bad) 2011-Dec-13 05:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.092 (still bad) 2011-Dec-13 05:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.091 (still bad) 2011-Dec-13 05:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.089 (still bad) 2011-Dec-13 05:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.090 (still bad) 2011-Dec-13 05:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.091 (still bad) 2011-Dec-13 05:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.089 (still bad) 2011-Dec-13 05:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.091 (still bad) 2011-Dec-13 05:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.091 (still bad) 2011-Dec-13 05:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.089 (still bad) 2011-Dec-13 05:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.088 (still bad) 2011-Dec-13 05:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.090 (still bad) 2011-Dec-13 05:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.088 (still bad) 2011-Dec-13 05:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.090 (still bad) 2011-Dec-13 05:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.090 (still bad) 2011-Dec-13 05:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.089 (still bad) 2011-Dec-13 05:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.091 (still bad) 2011-Dec-13 05:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.089 (still bad) 2011-Dec-13 05:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.086 (still bad) 2011-Dec-13 05:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.087 (still bad) 2011-Dec-13 05:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.092 (still bad) 2011-Dec-13 05:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.090 (still bad) 2011-Dec-13 05:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.092 (still bad) 2011-Dec-13 05:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.095 (still bad) 2011-Dec-13 05:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.090 (still bad) 2011-Dec-13 05:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.092 (still bad) 2011-Dec-13 05:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.092 (still bad) 2011-Dec-13 05:40:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-13 05:40:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.904 1.090 0.921 0.907 2011-Dec-13 05:40:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.917 0.999 1.076 0.912 2011-Dec-13 05:40:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.870 0.933 0.985 0.885 2011-Dec-13 05:40:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.903 0.021 0.983 0.021 2011-Dec-13 05:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.101 (still bad) 2011-Dec-13 05:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.093 (still bad) 2011-Dec-13 05:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.089 (still bad) 2011-Dec-13 05:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.090 (still bad) 2011-Dec-13 05:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.088 (still bad) 2011-Dec-13 05:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.091 (still bad) 2011-Dec-13 05:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.100 (still bad) 2011-Dec-13 05:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.090 (still bad) 2011-Dec-13 05:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.089 (still bad) 2011-Dec-13 05:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.093 (still bad) 2011-Dec-13 05:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.088 (still bad) 2011-Dec-13 05:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.089 (still bad) 2011-Dec-13 05:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.095 (still bad) 2011-Dec-13 05:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.091 (still bad) 2011-Dec-13 05:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.086 (still bad) 2011-Dec-13 05:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.092 (still bad) 2011-Dec-13 05:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.086 (still bad) 2011-Dec-13 05:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.086 (still bad) 2011-Dec-13 05:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.094 (still bad) 2011-Dec-13 05:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.089 (still bad) 2011-Dec-13 05:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.090 (still bad) 2011-Dec-13 05:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.093 (still bad) 2011-Dec-13 05:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.090 (still bad) 2011-Dec-13 05:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.090 (still bad) 2011-Dec-13 05:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.095 (still bad) 2011-Dec-13 05:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.091 (still bad) 2011-Dec-13 05:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.089 (still bad) 2011-Dec-13 05:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.092 (still bad) 2011-Dec-13 05:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.089 (still bad) 2011-Dec-13 05:41:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2011-Dec-13 05:41:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.904 1.089 0.919 0.906 2011-Dec-13 05:41:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 0.998 1.079 0.914 2011-Dec-13 05:41:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.868 0.931 0.983 0.887 2011-Dec-13 05:41:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.902 0.024 0.981 0.019 2011-Dec-13 05:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2011-Dec-13 05:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.091 (still bad) 2011-Dec-13 05:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.089 (still bad) 2011-Dec-13 05:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.093 (still bad) 2011-Dec-13 05:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.090 (still bad) 2011-Dec-13 05:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.087 (still bad) 2011-Dec-13 05:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.089 (still bad) 2011-Dec-13 05:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.090 (still bad) 2011-Dec-13 05:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.088 (still bad) 2011-Dec-13 05:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.092 (still bad) 2011-Dec-13 05:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.091 (still bad) 2011-Dec-13 05:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.088 (still bad) 2011-Dec-13 05:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.091 (still bad) 2011-Dec-13 05:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.092 (still bad) 2011-Dec-13 05:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.092 (still bad) 2011-Dec-13 05:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2011-Dec-13 05:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.096 (still bad) 2011-Dec-13 05:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-13 05:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.105 (still bad) 2011-Dec-13 05:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.092 (still bad) 2011-Dec-13 05:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.091 (still bad) 2011-Dec-13 05:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.093 (still bad) 2011-Dec-13 05:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.087 (still bad) 2011-Dec-13 05:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.090 (still bad) 2011-Dec-13 05:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.097 (still bad) 2011-Dec-13 05:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.090 (still bad) 2011-Dec-13 05:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.090 (still bad) 2011-Dec-13 05:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.093 (still bad) 2011-Dec-13 05:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.091 (still bad) 2011-Dec-13 05:42:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-13 05:42:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.911 1.093 0.922 0.908 2011-Dec-13 05:42:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.920 1.006 1.081 0.915 2011-Dec-13 05:42:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.870 0.935 0.991 0.893 2011-Dec-13 05:42:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.904 0.020 0.984 0.022 2011-Dec-13 05:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.099 (still bad) 2011-Dec-13 05:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.089 (still bad) 2011-Dec-13 05:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.087 (still bad) 2011-Dec-13 05:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.088 (still bad) 2011-Dec-13 05:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.084 (still bad) 2011-Dec-13 05:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.084 (still bad) 2011-Dec-13 05:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.092 (still bad) 2011-Dec-13 05:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.085 (still bad) 2011-Dec-13 05:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.085 (still bad) 2011-Dec-13 05:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.088 (still bad) 2011-Dec-13 05:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.086 (still bad) 2011-Dec-13 05:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.089 (still bad) 2011-Dec-13 05:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.099 (still bad) 2011-Dec-13 05:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.088 (still bad) 2011-Dec-13 05:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.088 (still bad) 2011-Dec-13 05:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.088 (still bad) 2011-Dec-13 05:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.085 (still bad) 2011-Dec-13 05:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.087 (still bad) 2011-Dec-13 05:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.096 (still bad) 2011-Dec-13 05:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.086 (still bad) 2011-Dec-13 05:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.084 (still bad) 2011-Dec-13 05:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.086 (still bad) 2011-Dec-13 05:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.084 (still bad) 2011-Dec-13 05:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.086 (still bad) 2011-Dec-13 05:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.098 (still bad) 2011-Dec-13 05:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.089 (still bad) 2011-Dec-13 05:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.092 (still bad) 2011-Dec-13 05:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.092 (still bad) 2011-Dec-13 05:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.094 (still bad) 2011-Dec-13 05:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.093 (still bad) 2011-Dec-13 05:43:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.029 < 0.75)! 2011-Dec-13 05:43:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.914 1.097 0.927 0.916 2011-Dec-13 05:43:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 1.003 1.092 0.927 2011-Dec-13 05:43:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.868 0.935 0.987 0.889 2011-Dec-13 05:43:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.908 0.029 0.989 0.029 2011-Dec-13 05:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.090 (still bad) 2011-Dec-13 05:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.089 (still bad) 2011-Dec-13 05:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.090 (still bad) 2011-Dec-13 05:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.087 (still bad) 2011-Dec-13 05:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.086 (still bad) 2011-Dec-13 05:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.087 (still bad) 2011-Dec-13 05:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.084 (still bad) 2011-Dec-13 05:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.088 (still bad) 2011-Dec-13 05:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.087 (still bad) 2011-Dec-13 05:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.084 (still bad) 2011-Dec-13 05:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.097 (still bad) 2011-Dec-13 05:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.086 (still bad) 2011-Dec-13 05:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.083 (still bad) 2011-Dec-13 05:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.085 (still bad) 2011-Dec-13 05:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.084 (still bad) 2011-Dec-13 05:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.086 (still bad) 2011-Dec-13 05:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.098 (still bad) 2011-Dec-13 05:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.086 (still bad) 2011-Dec-13 05:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.084 (still bad) 2011-Dec-13 05:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.087 (still bad) 2011-Dec-13 05:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.084 (still bad) 2011-Dec-13 05:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.085 (still bad) 2011-Dec-13 05:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.096 (still bad) 2011-Dec-13 05:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.084 (still bad) 2011-Dec-13 05:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.085 (still bad) 2011-Dec-13 05:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.086 (still bad) 2011-Dec-13 05:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.083 (still bad) 2011-Dec-13 05:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.085 (still bad) 2011-Dec-13 05:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.100 (still bad) 2011-Dec-13 05:44:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-13 05:44:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.905 1.088 0.919 0.906 2011-Dec-13 05:44:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.914 1.004 1.077 0.914 2011-Dec-13 05:44:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.867 0.933 0.985 0.888 2011-Dec-13 05:44:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.902 0.021 0.981 0.023 2011-Dec-13 05:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.084 (still bad) 2011-Dec-13 05:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.090 (still bad) 2011-Dec-13 05:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.088 (still bad) 2011-Dec-13 05:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.088 (still bad) 2011-Dec-13 05:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.101 (still bad) 2011-Dec-13 05:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.089 (still bad) 2011-Dec-13 05:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.088 (still bad) 2011-Dec-13 05:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.091 (still bad) 2011-Dec-13 05:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.088 (still bad) 2011-Dec-13 05:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.090 (still bad) 2011-Dec-13 05:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.098 (still bad) 2011-Dec-13 05:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.089 (still bad) 2011-Dec-13 05:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.087 (still bad) 2011-Dec-13 05:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.088 (still bad) 2011-Dec-13 05:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.086 (still bad) 2011-Dec-13 05:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.085 (still bad) 2011-Dec-13 05:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.096 (still bad) 2011-Dec-13 05:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.091 (still bad) 2011-Dec-13 05:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.085 (still bad) 2011-Dec-13 05:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.091 (still bad) 2011-Dec-13 05:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.089 (still bad) 2011-Dec-13 05:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.088 (still bad) 2011-Dec-13 05:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.095 (still bad) 2011-Dec-13 05:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.087 (still bad) 2011-Dec-13 05:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.085 (still bad) 2011-Dec-13 05:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.088 (still bad) 2011-Dec-13 05:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.084 (still bad) 2011-Dec-13 05:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.085 (still bad) 2011-Dec-13 05:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.094 (still bad) 2011-Dec-13 05:45:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-13 05:45:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.904 1.084 0.918 0.906 2011-Dec-13 05:45:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.914 1.002 1.079 0.918 2011-Dec-13 05:45:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.868 0.934 0.987 0.888 2011-Dec-13 05:45:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.899 0.025 0.979 0.026 2011-Dec-13 05:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.086 (still bad) 2011-Dec-13 05:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.090 (still bad) 2011-Dec-13 05:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.086 (still bad) 2011-Dec-13 05:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.088 (still bad) 2011-Dec-13 05:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2011-Dec-13 05:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.086 (still bad) 2011-Dec-13 05:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.087 (still bad) 2011-Dec-13 05:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.089 (still bad) 2011-Dec-13 05:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.086 (still bad) 2011-Dec-13 05:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.086 (still bad) 2011-Dec-13 05:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2011-Dec-13 05:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.086 (still bad) 2011-Dec-13 05:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.084 (still bad) 2011-Dec-13 05:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.086 (still bad) 2011-Dec-13 05:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.083 (still bad) 2011-Dec-13 05:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.085 (still bad) 2011-Dec-13 05:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.093 (still bad) 2011-Dec-13 05:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.085 (still bad) 2011-Dec-13 05:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.086 (still bad) 2011-Dec-13 05:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.089 (still bad) 2011-Dec-13 05:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.085 (still bad) 2011-Dec-13 05:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.087 (still bad) 2011-Dec-13 05:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.098 (still bad) 2011-Dec-13 05:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.091 (still bad) 2011-Dec-13 05:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.095 (still bad) 2011-Dec-13 05:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.100 (still bad) 2011-Dec-13 05:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.101 (still bad) 2011-Dec-13 05:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.104 (still bad) 2011-Dec-13 05:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.112 (still bad) 2011-Dec-13 05:46:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.029 < 0.75)! 2011-Dec-13 05:46:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.904 1.086 0.921 0.907 2011-Dec-13 05:46:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.913 1.001 1.097 0.932 2011-Dec-13 05:46:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 0.934 0.982 0.885 2011-Dec-13 05:46:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.903 0.029 0.980 0.030 2011-Dec-13 05:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.089 (still bad) 2011-Dec-13 05:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.090 (still bad) 2011-Dec-13 05:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.085 (still bad) 2011-Dec-13 05:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.087 (still bad) 2011-Dec-13 05:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.096 (still bad) 2011-Dec-13 05:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.087 (still bad) 2011-Dec-13 05:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.085 (still bad) 2011-Dec-13 05:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.088 (still bad) 2011-Dec-13 05:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.086 (still bad) 2011-Dec-13 05:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.086 (still bad) 2011-Dec-13 05:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2011-Dec-13 05:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.085 (still bad) 2011-Dec-13 05:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.088 (still bad) 2011-Dec-13 05:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.087 (still bad) 2011-Dec-13 05:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.086 (still bad) 2011-Dec-13 05:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.089 (still bad) 2011-Dec-13 05:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.089 (still bad) 2011-Dec-13 05:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.085 (still bad) 2011-Dec-13 05:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.088 (still bad) 2011-Dec-13 05:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.087 (still bad) 2011-Dec-13 05:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.084 (still bad) 2011-Dec-13 05:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.088 (still bad) 2011-Dec-13 05:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.087 (still bad) 2011-Dec-13 05:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.084 (still bad) 2011-Dec-13 05:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.085 (still bad) 2011-Dec-13 05:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.086 (still bad) 2011-Dec-13 05:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.086 (still bad) 2011-Dec-13 05:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.090 (still bad) 2011-Dec-13 05:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.088 (still bad) 2011-Dec-13 05:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.087 (still bad) 2011-Dec-13 05:47:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.029 < 0.75)! 2011-Dec-13 05:47:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.906 1.086 0.919 0.906 2011-Dec-13 05:47:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.913 1.002 1.074 0.912 2011-Dec-13 05:47:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 0.934 0.984 0.887 2011-Dec-13 05:47:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.902 0.029 0.981 0.030 2011-Dec-13 05:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.085 (still bad) 2011-Dec-13 05:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.085 (still bad) 2011-Dec-13 05:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.087 (still bad) 2011-Dec-13 05:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.089 (still bad) 2011-Dec-13 05:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.086 (still bad) 2011-Dec-13 05:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.089 (still bad) 2011-Dec-13 05:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.087 (still bad) 2011-Dec-13 05:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.085 (still bad) 2011-Dec-13 05:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.085 (still bad) 2011-Dec-13 05:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.084 (still bad) 2011-Dec-13 05:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.084 (still bad) 2011-Dec-13 05:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.084 (still bad) 2011-Dec-13 05:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.084 (still bad) 2011-Dec-13 05:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.084 (still bad) 2011-Dec-13 05:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.083 (still bad) 2011-Dec-13 05:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.085 (still bad) 2011-Dec-13 05:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.082 (still bad) 2011-Dec-13 05:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.083 (still bad) 2011-Dec-13 05:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.084 (still bad) 2011-Dec-13 05:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.083 (still bad) 2011-Dec-13 05:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.083 (still bad) 2011-Dec-13 05:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.084 (still bad) 2011-Dec-13 05:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.084 (still bad) 2011-Dec-13 05:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.082 (still bad) 2011-Dec-13 05:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.084 (still bad) 2011-Dec-13 05:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.081 (still bad) 2011-Dec-13 05:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.084 (still bad) 2011-Dec-13 05:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.087 (still bad) 2011-Dec-13 05:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.081 (still bad) 2011-Dec-13 05:48:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2011-Dec-13 05:48:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.904 1.082 0.917 0.905 2011-Dec-13 05:48:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.910 0.999 1.071 0.912 2011-Dec-13 05:48:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.863 0.931 0.981 0.885 2011-Dec-13 05:48:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.902 0.028 0.982 0.028 2011-Dec-13 05:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.084 (still bad) 2011-Dec-13 05:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.083 (still bad) 2011-Dec-13 05:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.091 (still bad) 2011-Dec-13 05:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.084 (still bad) 2011-Dec-13 05:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.082 (still bad) 2011-Dec-13 05:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.084 (still bad) 2011-Dec-13 05:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.080 (still bad) 2011-Dec-13 05:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.083 (still bad) 2011-Dec-13 05:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.093 (still bad) 2011-Dec-13 05:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.084 (still bad) 2011-Dec-13 05:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.082 (still bad) 2011-Dec-13 05:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.084 (still bad) 2011-Dec-13 05:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.081 (still bad) 2011-Dec-13 05:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.080 (still bad) 2011-Dec-13 05:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.089 (still bad) 2011-Dec-13 05:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.081 (still bad) 2011-Dec-13 05:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.081 (still bad) 2011-Dec-13 05:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.086 (still bad) 2011-Dec-13 05:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.082 (still bad) 2011-Dec-13 05:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.085 (still bad) 2011-Dec-13 05:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.090 (still bad) 2011-Dec-13 05:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.084 (still bad) 2011-Dec-13 05:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.081 (still bad) 2011-Dec-13 05:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.085 (still bad) 2011-Dec-13 05:49:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.083 (still bad) 2011-Dec-13 05:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.083 (still bad) 2011-Dec-13 05:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.088 (still bad) 2011-Dec-13 05:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.085 (still bad) 2011-Dec-13 05:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.082 (still bad) 2011-Dec-13 05:49:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-13 05:49:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.907 1.084 0.919 0.906 2011-Dec-13 05:49:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.913 0.999 1.073 0.913 2011-Dec-13 05:49:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.864 0.934 0.984 0.887 2011-Dec-13 05:49:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.900 0.022 0.981 0.023 2011-Dec-13 05:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.080 (still bad) 2011-Dec-13 05:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.082 (still bad) 2011-Dec-13 05:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.084 (still bad) 2011-Dec-13 05:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.082 (still bad) 2011-Dec-13 05:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.082 (still bad) 2011-Dec-13 05:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.083 (still bad) 2011-Dec-13 05:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.080 (still bad) 2011-Dec-13 05:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.081 (still bad) 2011-Dec-13 05:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.084 (still bad) 2011-Dec-13 05:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.084 (still bad) 2011-Dec-13 05:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.083 (still bad) 2011-Dec-13 05:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.082 (still bad) 2011-Dec-13 05:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.081 (still bad) 2011-Dec-13 05:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.082 (still bad) 2011-Dec-13 05:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.087 (still bad) 2011-Dec-13 05:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.084 (still bad) 2011-Dec-13 05:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.081 (still bad) 2011-Dec-13 05:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.084 (still bad) 2011-Dec-13 05:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.084 (still bad) 2011-Dec-13 05:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.083 (still bad) 2011-Dec-13 05:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.092 (still bad) 2011-Dec-13 05:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.085 (still bad) 2011-Dec-13 05:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.083 (still bad) 2011-Dec-13 05:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.086 (still bad) 2011-Dec-13 05:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.083 (still bad) 2011-Dec-13 05:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.085 (still bad) 2011-Dec-13 05:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.092 (still bad) 2011-Dec-13 05:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.083 (still bad) 2011-Dec-13 05:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.082 (still bad) 2011-Dec-13 05:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.088 (still bad) 2011-Dec-13 05:50:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2011-Dec-13 05:50:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.906 1.083 0.917 0.907 2011-Dec-13 05:50:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.909 0.997 1.072 0.913 2011-Dec-13 05:50:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.863 0.934 0.981 0.886 2011-Dec-13 05:50:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.899 0.019 0.979 0.020 2011-Dec-13 05:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.081 (still bad) 2011-Dec-13 05:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.094 (still bad) 2011-Dec-13 05:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.081 (still bad) 2011-Dec-13 05:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.083 (still bad) 2011-Dec-13 05:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.084 (still bad) 2011-Dec-13 05:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.081 (still bad) 2011-Dec-13 05:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.081 (still bad) 2011-Dec-13 05:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.095 (still bad) 2011-Dec-13 05:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.083 (still bad) 2011-Dec-13 05:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.081 (still bad) 2011-Dec-13 05:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.083 (still bad) 2011-Dec-13 05:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.080 (still bad) 2011-Dec-13 05:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.083 (still bad) 2011-Dec-13 05:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.093 (still bad) 2011-Dec-13 05:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.082 (still bad) 2011-Dec-13 05:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.082 (still bad) 2011-Dec-13 05:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.085 (still bad) 2011-Dec-13 05:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.082 (still bad) 2011-Dec-13 05:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.083 (still bad) 2011-Dec-13 05:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.093 (still bad) 2011-Dec-13 05:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.084 (still bad) 2011-Dec-13 05:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.082 (still bad) 2011-Dec-13 05:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.087 (still bad) 2011-Dec-13 05:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.080 (still bad) 2011-Dec-13 05:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.084 (still bad) 2011-Dec-13 05:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.094 (still bad) 2011-Dec-13 05:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.082 (still bad) 2011-Dec-13 05:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.082 (still bad) 2011-Dec-13 05:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.088 (still bad) 2011-Dec-13 05:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.082 (still bad) 2011-Dec-13 05:51:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-13 05:51:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.909 1.084 0.917 0.906 2011-Dec-13 05:51:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.913 0.999 1.073 0.914 2011-Dec-13 05:51:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.864 0.932 0.984 0.888 2011-Dec-13 05:51:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.903 0.030 0.983 0.020 2011-Dec-13 05:51:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 05:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.094 (still bad) 2011-Dec-13 05:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.085 (still bad) 2011-Dec-13 05:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.085 (still bad) 2011-Dec-13 05:52:00 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-13 05:52:00 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-13 05:52:00 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-13 05:52:00 LOG5 end_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2011-Dec-13 05:52:00 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-13 05:52:00 LOG5 end_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2011-Dec-13 05:52:00 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-13 05:52:00 LOG5 finish_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2011-Dec-13 05:52:00 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-13 05:52:00 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-13 05:52:00 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-13 05:52:00 LOG5 end_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2011-Dec-13 05:52:00 COMMAND run_command_line: EXECUTING command 41: 'ENDIF' 2011-Dec-13 05:52:00 COMMAND run_command_line: EXECUTING command 44: 'IF LSTSLEW(AGES3193_p3_133) < 105440 THEN' 2011-Dec-13 05:52:00 LOG3 is_if_valid: Current source data: up 101.4 13.9 UP - - 25 1.9 2011-Dec-13 05:52:00 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_133) < 105440 2011-Dec-13 05:52:00 INFO5 is_if_valid: Condition parsed as: 10.896966666666666 < 10.911111111111111 2011-Dec-13 05:52:00 COMMAND run_command_line: EXECUTING command 45: 'FIXEDDRIFT az=101.08 alfaangle=-77.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_133 ra=95300.00 dec=203500.00' 2011-Dec-13 05:52:00 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-13 05:52:01 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-13 05:52:01 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 101.08 -77.8 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_133 95300.00 203500.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-13 05:52:01 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-13 05:52:01 LOG5 begin_task: Level: (2) ID = <10230> Status = 0 0 0 0 ok 2011-Dec-13 05:52:01 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_131' 2011-Dec-13 05:52:01 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-13 05:52:01 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_133} 2011-Dec-13 05:52:01 INFO3 fixed_driftmap: Sending telescope to Az = 101.08 and ZA = 14.54 2011-Dec-13 05:52:01 LOG3 track_source: Calling 'track_source AGES3193_p3_133 101.08 14.5362715324 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-13 05:52:01 START begin_task: Starting task 'sending tracking commands' 2011-Dec-13 05:52:01 LOG5 begin_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2011-Dec-13 05:52:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_133} INFO {Slewing to source 'AGES3193_p3_133' ...} 2011-Dec-13 05:52:01 INFO1 track_source: Starting to track AGES3193_p3_133 2011-Dec-13 05:52:01 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_133" 2011-Dec-13 05:52:01 LOG3 vw_send: To DATATAKING: set ra 101.08 2011-Dec-13 05:52:01 LOG3 vw_send: To DATATAKING: set dec 14.5362715324 2011-Dec-13 05:52:01 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-13 05:52:01 LOG3 vw_send: To DATATAKING: pnt tr 101.08 14.5362715324 -CF 2011-Dec-13 05:52:01 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 05:52:01 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-13 05:52:01 LOG5 finish_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2011-Dec-13 05:52:01 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-13 05:52:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 05:52:01 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-13 05:52:01 LOG5 end_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2011-Dec-13 05:52:01 START begin_task: Starting task 'rotate ALFA to -77.8 degrees' 2011-Dec-13 05:52:01 LOG5 begin_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2011-Dec-13 05:52:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -77.8 degrees ...} 2011-Dec-13 05:52:01 INFO2 rotate_alfa: ALFA commanded to -77.8 degrees 2011-Dec-13 05:52:01 LOG3 sock_errsend: To ALFAMOTOR: POSITION -77.8 REPLY 2011-Dec-13 05:52:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-13 05:52:01 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-13 05:52:01 LOG5 begin_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2011-Dec-13 05:52:01 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_133" 2011-Dec-13 05:52:01 LOG4 got_cormsg: From DATATAKING: set ra 101.08 2011-Dec-13 05:52:01 LOG4 got_cormsg: From DATATAKING: set dec 14.5362715324 2011-Dec-13 05:52:01 LOG4 got_cormsg: From DATATAKING: vw% 101.08 2011-Dec-13 05:52:01 LOG4 got_cormsg: From DATATAKING: vw% 14.5362715324 2011-Dec-13 05:52:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:52:01 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-13 05:52:01 LOG4 got_cormsg: From DATATAKING: pnt tr 101.08 14.5362715324 -CF 2011-Dec-13 05:52:01 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 05:52:01 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-13 05:52:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.085 (still bad) 2011-Dec-13 05:52:03 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 05:52:03.301 (seconds: 21123.301)!} 2011-Dec-13 05:52:03 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 05:52:03.301 (seconds: 21123.301)! 2011-Dec-13 05:52:06 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-13 05:52:06 INFO3 alfa_motor: ALFA rotator in-position -77.80 degrees 2011-Dec-13 05:52:06 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-13 05:52:06 LOG5 end_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2011-Dec-13 05:52:06 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-13 05:52:06 STOP finish_task: Finishing task 'rotate ALFA to -77.8 degrees' 2011-Dec-13 05:52:06 LOG5 finish_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2011-Dec-13 05:52:06 INFO2 finish_task: DONE finished configuration: rotating ALFA to -77.8 degrees 2011-Dec-13 05:52:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 05:52:06 STOP end_task: Finishing task 'rotate ALFA to -77.8 degrees' with status 'OK' 2011-Dec-13 05:52:06 LOG5 end_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2011-Dec-13 05:52:07 START begin_task: Starting task 'waiting on telescope' 2011-Dec-13 05:52:07 LOG5 begin_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2011-Dec-13 05:52:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-13 05:52:07 LOG3 waittrk: Start waittrk 5 2011-Dec-13 05:52:07 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-13 05:52:07 LOG5 begin_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2011-Dec-13 05:52:12 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-13 05:52:12 LOG5 end_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2011-Dec-13 05:52:12 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-13 05:52:12 LOG5 begin_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2011-Dec-13 05:54:18 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-13 05:54:18 LOG5 end_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2011-Dec-13 05:54:18 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-13 05:54:18 INFO2 waittrk: Now tracking AGES3193_p3_133 2011-Dec-13 05:54:18 LOG4 waittrk: Current telescope position: Az = 100.82 ZA = 14.55 2011-Dec-13 05:54:18 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-13 05:54:18 LOG5 finish_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2011-Dec-13 05:54:18 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-13 05:54:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 05:54:18 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-13 05:54:18 LOG5 end_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2011-Dec-13 05:54:18 START begin_task: Starting task 'selecting calibration type' 2011-Dec-13 05:54:18 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2011-Dec-13 05:54:18 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-13 05:54:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-13 05:54:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 05:54:18 START begin_task: Starting task 'waiting on setcal' 2011-Dec-13 05:54:18 LOG5 begin_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2011-Dec-13 05:54:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-13 05:54:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 05:54:19 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:54:19 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-13 05:54:19 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-13 05:54:19 LOG5 end_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2011-Dec-13 05:54:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-13 05:54:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-13 05:54:19 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-13 05:54:19 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-13 05:54:19 LOG5 begin_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2011-Dec-13 05:54:19 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:54:19 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-13 05:54:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-13 05:54:19 LOG5 end_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2011-Dec-13 05:54:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-13 05:54:19 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-13 05:54:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-13 05:54:19 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-13 05:54:19 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-13 05:54:19 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2011-Dec-13 05:54:19 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-13 05:54:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-13 05:54:19 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2011-Dec-13 05:54:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-13 05:54:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-13 05:54:19 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-13 05:54:19 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2011-Dec-13 05:54:19 LOG5 dopset_later: Calling 'dopset_later 25.658361281400975' 2011-Dec-13 05:54:19 INFO3 dopset_later: Setting Doppler correction for 05:54:45 (25.7 seconds from now) 2011-Dec-13 05:54:19 LOG5 antvel: Calling 'antvel 101.080000 14.536272 F Heliocentric 25.658361281400975' 2011-Dec-13 05:54:19 LOG2 antvel: Transforming current Az = 101.08 ZA = 14.54 to apparent RA = 09:53:41.5 Dec = +20:31:23.4 2011-Dec-13 05:54:19 LOG2 antvel: Parameters to Doppler: Heliocentric 35685 2011 347 0.0 2011-Dec-13 05:54:19 INFO5 antvel: Computed antenna velocity: -26.41795 km/s 2011-Dec-13 05:54:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-26.4179460201 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-13 05:54:19 INFO4 dopset_gen: New sky frequencies: 1381.365156 1381.365156 1381.365156 1381.365156 1381.365156 1381.365156 1381.365156 1381.365156 1381.365156 2011-Dec-13 05:54:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.365156 sky0=1381.365156 sky1=1381.365156 sky2=1381.365156 sky3=1381.365156 sky4=1381.365156 sky5=1381.365156 sky6=1381.365156 sky7=1381.365156 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-13 05:54:19 LOG2 dopset_gen: Result from 'sky2syn': 1631.365156 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-13 05:54:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631365156.0} 2011-Dec-13 05:54:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 05:54:19 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-13 05:54:19 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-13 05:54:19 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:38.9 Dec = +20:34:47.1 2011-Dec-13 05:54:19 LOG3 track_source: Calling 'track_source AGES3193_p3_133 095238.9 203447.1 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-13 05:54:19 START begin_task: Starting task 'sending tracking commands' 2011-Dec-13 05:54:19 LOG5 begin_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2011-Dec-13 05:54:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_133} INFO {Slewing to source 'AGES3193_p3_133' ...} 2011-Dec-13 05:54:19 INFO1 track_source: Starting to track AGES3193_p3_133 2011-Dec-13 05:54:20 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_133" 2011-Dec-13 05:54:20 LOG3 vw_send: To DATATAKING: set ra 095238.9 2011-Dec-13 05:54:20 LOG3 vw_send: To DATATAKING: set dec 203447.1 2011-Dec-13 05:54:20 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-13 05:54:20 LOG3 vw_send: To DATATAKING: pnt tr 095238.9 203447.1 -CJ 2011-Dec-13 05:54:20 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 05:54:20 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-13 05:54:20 LOG5 finish_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2011-Dec-13 05:54:20 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-13 05:54:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 05:54:20 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-13 05:54:20 LOG5 end_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2011-Dec-13 05:54:20 START begin_task: Starting task 'waiting on telescope' 2011-Dec-13 05:54:20 LOG5 begin_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2011-Dec-13 05:54:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-13 05:54:20 LOG3 waittrk: Start waittrk 5 2011-Dec-13 05:54:20 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-13 05:54:20 LOG5 begin_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2011-Dec-13 05:54:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631365156.0} 2011-Dec-13 05:54:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 05:54:20 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:54:20 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_133" 2011-Dec-13 05:54:20 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:54:20 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:54:20 LOG4 got_cormsg: From DATATAKING: set ra 095238.9 2011-Dec-13 05:54:20 LOG4 got_cormsg: From DATATAKING: set dec 203447.1 2011-Dec-13 05:54:20 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-13 05:54:20 LOG4 got_cormsg: From DATATAKING: pnt tr 095238.9 203447.1 -CJ 2011-Dec-13 05:54:20 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 05:54:20 LOG4 got_cormsg: From DATATAKING: 095238.9 2011-Dec-13 05:54:20 LOG4 got_cormsg: From DATATAKING: vw% 203447.1 2011-Dec-13 05:54:20 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2011-Dec-13 05:54:25 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-13 05:54:25 LOG5 end_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2011-Dec-13 05:54:25 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-13 05:54:25 LOG5 begin_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2011-Dec-13 05:54:27 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-13 05:54:27 LOG5 end_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2011-Dec-13 05:54:27 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-13 05:54:27 INFO2 waittrk: Now tracking AGES3193_p3_133 2011-Dec-13 05:54:27 LOG4 waittrk: Current telescope position: Az = 100.80 ZA = 14.56 2011-Dec-13 05:54:27 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-13 05:54:27 LOG5 finish_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2011-Dec-13 05:54:27 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-13 05:54:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 05:54:27 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-13 05:54:27 LOG5 end_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2011-Dec-13 05:54:27 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-13 05:54:27 LOG5 begin_task: Level: (3) ID = <10245> Status = 0 0 0 0 ok 2011-Dec-13 05:54:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-13 05:54:27 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-13 05:54:27 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-13 05:54:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-13 05:54:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 05:54:27 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-13 05:54:27 LOG5 begin_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2011-Dec-13 05:54:27 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-13 05:54:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 05:54:30 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:54:30 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-13 05:54:30 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-13 05:54:30 LOG5 end_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2011-Dec-13 05:54:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-13 05:54:30 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-13 05:54:30 LOG5 begin_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2011-Dec-13 05:54:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-13 05:54:30 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-13 05:54:30 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-13 05:54:30 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-13 05:54:30 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-13 05:54:30 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-13 05:54:30 LOG5 begin_task: Level: (5) ID = <10248> Status = 0 0 0 0 ok 2011-Dec-13 05:54:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-13 05:54:30 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:54:31 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 8 6 dB 2011-Dec-13 05:54:31 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 3 dB 2011-Dec-13 05:54:31 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2011-Dec-13 05:54:31 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 3 4 dB 2011-Dec-13 05:54:31 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-13 05:54:31 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-13 05:54:31 LOG5 end_task: Level: (5) ID = <10248> Status = 0 0 0 0 ok 2011-Dec-13 05:54:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.935 1.117 ALFA beam 1: 0.949 0.935 2011-Dec-13 05:54:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.958 1.043 ALFA beam 3: 1.109 0.933 2011-Dec-13 05:54:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.880 0.975 ALFA beam 5: 1.042 0.936 2011-Dec-13 05:54:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.938 0.016 ALFA beam 7: 1.021 0.018 2011-Dec-13 05:54:31 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-13 05:54:31 LOG5 finish_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2011-Dec-13 05:54:31 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-13 05:54:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 05:54:31 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-13 05:54:31 LOG5 end_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2011-Dec-13 05:54:31 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-13 05:54:31 LOG5 begin_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2011-Dec-13 05:54:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-13 05:54:31 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-13 05:54:31 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-13 05:54:31 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-13 05:54:31 LOG5 begin_task: Level: (5) ID = <10250> Status = 0 0 0 0 ok 2011-Dec-13 05:54:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.016 < 0.75)! 2011-Dec-13 05:54:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 1.117 0.949 0.935 2011-Dec-13 05:54:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.958 1.043 1.109 0.933 2011-Dec-13 05:54:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.880 0.975 1.042 0.936 2011-Dec-13 05:54:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.938 0.016 1.021 0.018 2011-Dec-13 05:54:36 INFO3 from_mock: From MOCK: b0s0g0 rms:A 32.5 28.6 B 30.8 30.9 mn:A 0.2 0.2 B -0.2 -0.4 gn: 11 11 2011-Dec-13 05:54:36 INFO3 from_mock: From MOCK: b0s1g0 rms:A 31.8 30.4 B 31.3 33.2 mn:A 0.2 -0.5 B -0.5 0.2 gn: 11 11 2011-Dec-13 05:54:37 INFO3 from_mock: From MOCK: b1s0g0 rms:A 31.2 29.2 B 33.0 28.9 mn:A 0.6 0.6 B 0.2 -0.1 gn: 7 11 2011-Dec-13 05:54:37 INFO3 from_mock: From MOCK: b1s1g0 rms:A 35.3 32.6 B 33.6 33.6 mn:A -0.2 -0.3 B 0.5 0.1 gn: 8 10 2011-Dec-13 05:54:37 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.2 28.3 B 28.8 30.1 mn:A -0.0 -0.3 B 0.3 -0.0 gn: 10 11 2011-Dec-13 05:54:37 INFO3 from_mock: From MOCK: b2s1g0 rms:A 36.3 36.6 B 30.4 28.2 mn:A 0.2 -0.2 B 0.2 0.2 gn: 11 11 2011-Dec-13 05:54:37 INFO3 from_mock: From MOCK: b3s0g0 rms:A 29.6 29.4 B 31.9 28.4 mn:A 0.3 -0.3 B 0.0 -0.3 gn: 12 12 2011-Dec-13 05:54:37 INFO3 from_mock: From MOCK: b3s1g0 rms:A 33.8 33.0 B 34.2 35.7 mn:A -0.3 0.3 B 0.1 0.1 gn: 12 12 2011-Dec-13 05:54:37 INFO3 from_mock: From MOCK: b4s0g0 rms:A 31.1 30.2 B 29.4 29.6 mn:A -0.2 -0.3 B -0.5 0.0 gn: 13 11 2011-Dec-13 05:54:37 INFO3 from_mock: From MOCK: b4s1g0 rms:A 31.0 28.0 B 32.5 31.3 mn:A -0.1 0.0 B -0.3 0.2 gn: 15 12 2011-Dec-13 05:54:37 INFO3 from_mock: From MOCK: b5s0g0 rms:A 30.8 29.6 B 28.8 28.7 mn:A 0.3 0.4 B -0.0 0.4 gn: 12 10 2011-Dec-13 05:54:37 INFO3 from_mock: From MOCK: b5s1g0 rms:A 33.6 33.4 B 30.3 30.0 mn:A -0.4 0.3 B 0.0 0.3 gn: 12 10 2011-Dec-13 05:54:37 INFO3 from_mock: From MOCK: b6s0g0 rms:A 30.0 27.5 B 15.4 15.9 mn:A -0.4 0.2 B 0.4 -0.4 gn: 12 31 2011-Dec-13 05:54:37 INFO3 from_mock: From MOCK: b6s1g0 rms:A 32.4 29.4 B 12.5 12.2 mn:A 0.5 0.6 B 0.1 0.1 gn: 13 31 2011-Dec-13 05:54:37 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-13 05:54:37 LOG5 end_task: Level: (5) ID = <10250> Status = 0 0 0 0 ok 2011-Dec-13 05:54:37 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-13 05:54:37 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-13 05:54:37 LOG5 finish_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2011-Dec-13 05:54:37 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-13 05:54:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 05:54:37 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-13 05:54:37 LOG5 end_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2011-Dec-13 05:54:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-13 05:54:37 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-13 05:54:37 LOG5 finish_task: Level: (3) ID = <10245> Status = 0 0 0 0 ok 2011-Dec-13 05:54:37 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-13 05:54:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 05:54:37 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-13 05:54:37 LOG5 end_task: Level: (3) ID = <10245> Status = 0 0 0 0 ok 2011-Dec-13 05:54:37 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ep 2011-Dec-13 05:54:37 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ep 2011-Dec-13 05:54:37 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ep 2011-Dec-13 05:54:37 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ep 2011-Dec-13 05:54:37 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-13 05:54:37 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-13 05:54:37 LOG5 begin_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2011-Dec-13 05:54:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-13 05:54:37 START begin_task: Starting task 'selecting calibration type' 2011-Dec-13 05:54:37 LOG5 begin_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2011-Dec-13 05:54:37 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-13 05:54:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-13 05:54:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 05:54:37 START begin_task: Starting task 'waiting on setcal' 2011-Dec-13 05:54:37 LOG5 begin_task: Level: (5) ID = <10253> Status = 0 0 0 0 ok 2011-Dec-13 05:54:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ep' 2011-Dec-13 05:54:37 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-13 05:54:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 05:54:37 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:54:37 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-13 05:54:37 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-13 05:54:37 LOG5 end_task: Level: (5) ID = <10253> Status = 0 0 0 0 ok 2011-Dec-13 05:54:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-13 05:54:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-13 05:54:37 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-13 05:54:37 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-13 05:54:37 LOG5 begin_task: Level: (5) ID = <10254> Status = 0 0 0 0 ok 2011-Dec-13 05:54:37 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:54:37 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-13 05:54:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-13 05:54:37 LOG5 end_task: Level: (5) ID = <10254> Status = 0 0 0 0 ok 2011-Dec-13 05:54:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-13 05:54:37 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-13 05:54:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-13 05:54:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-13 05:54:37 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-13 05:54:37 LOG5 begin_task: Level: (5) ID = <10255> Status = 0 0 0 0 ok 2011-Dec-13 05:54:38 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-13 05:54:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-13 05:54:38 LOG5 end_task: Level: (5) ID = <10255> Status = 0 0 0 0 ok 2011-Dec-13 05:54:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-13 05:54:38 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-13 05:54:38 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-13 05:54:38 LOG5 end_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2011-Dec-13 05:54:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-13 05:54:38 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-13 05:54:38 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-13 05:54:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-13 05:54:38 LOG5 begin_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2011-Dec-13 05:54:38 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-13 05:54:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-13 05:54:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-13 05:54:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-13 05:54:38 LOG5 end_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2011-Dec-13 05:54:38 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-13 05:54:38 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-13 05:54:38 LOG5 begin_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2011-Dec-13 05:54:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-13 05:54:38 LOG5 log_alfabeam: Parameters: 9.8774722222222202 20.579750000000001 10.909309 2011.9507084505794 -77.800003 2011-Dec-13 05:54:38 LOG4 log_alfabeam: ALFABEAM 0 9.877472222222222 20.579750000000001 2011-Dec-13 05:54:38 LOG4 log_alfabeam: ALFABEAM 1 9.875817385244423 20.669829454975140 2011-Dec-13 05:54:38 LOG4 log_alfabeam: ALFABEAM 2 9.870228805467052 20.609770878179756 2011-Dec-13 05:54:38 LOG4 log_alfabeam: ALFABEAM 3 9.871912375094407 20.519394149112671 2011-Dec-13 05:54:38 LOG4 log_alfabeam: ALFABEAM 4 9.879163832060488 20.489993213271646 2011-Dec-13 05:54:38 LOG4 log_alfabeam: ALFABEAM 5 9.884716544248180 20.549927295572243 2011-Dec-13 05:54:38 LOG4 log_alfabeam: ALFABEAM 6 9.883053462936376 20.639387203233319 2011-Dec-13 05:54:38 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-13 05:54:38 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-13 05:54:38 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-13 05:54:38 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_133 2011-Dec-13 05:54:38 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-13 05:54:38 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-13 05:54:38 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-13 05:54:38 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-13 05:54:38 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-13 05:54:38 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-13 05:54:38 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-13 05:54:38 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-13 05:54:38 LOG3 take_mock_data: PSET configuration: patternid=134700066 2011-Dec-13 05:54:38 LOG3 take_mock_data: PSET configuration: scanid=134700067 2011-Dec-13 05:54:38 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-13 05:54:38 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-13 05:54:38 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-13 05:54:38 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456365156.0 2011-Dec-13 05:54:38 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306365156.0 2011-Dec-13 05:54:38 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-13 05:54:38 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-13 05:54:38 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_133:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=134700066:scanid=134700067:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456365156.0:topobfreqhz=1306365156.0:filetype=1 2011-Dec-13 05:54:38 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-13 05:54:38 LOG5 begin_task: Level: (5) ID = <10258> Status = 0 0 0 0 ok 2011-Dec-13 05:54:38 LOG4 from_mock: From MOCK: psetok 2011-Dec-13 05:54:38 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-13 05:54:38 LOG5 end_task: Level: (5) ID = <10258> Status = 0 0 0 0 ok 2011-Dec-13 05:54:38 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-13 05:54:38 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-13 05:54:38 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-13 05:54:38 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-13 05:54:38 LOG5 begin_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2011-Dec-13 05:54:38 NOTE WAPPDATA-new_file: New FITS file: wapp.20111213.a2048.0005.fits 2011-Dec-13 05:54:38 LOG4 from_mock: From MOCK: starok 2011-Dec-13 05:54:38 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-13 05:54:38 LOG5 end_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2011-Dec-13 05:54:38 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-13 05:54:38 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134700067 2011-Dec-13 05:54:39 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-13 05:54:39 LOG5 begin_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2011-Dec-13 05:54:39 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111213.a2048.0005.fits} 2011-Dec-13 05:54:39 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-13 05:54:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 05:54:39 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-13 05:54:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-13 05:54:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35680.00 2011-Dec-13 05:54:40 INFO2 got_mock_message: Mock spectrometer start file number is 01500 2011-Dec-13 05:54:40 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-13 05:54:40 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-13 05:54:40 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-13 05:54:40 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-13 05:54:40 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-13 05:54:40 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-13 05:54:40 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-13 05:54:40 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-13 05:54:40 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-13 05:54:40 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-13 05:54:40 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-13 05:54:40 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-13 05:54:40 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:54:40 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:54:40 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:54:40 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:54:40 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:54:40 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:54:40 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:54:43 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:54:43.02 2011-Dec-13 05:54:43 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323770083.02 Tue Dec 13 05:54:43 2011 2011-Dec-13 05:54:43 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-13 05:54:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.365156 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 05:54:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.365156 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 05:54:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.365156 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 05:54:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.365156 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 05:54:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.365156 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 05:54:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.365156 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 05:54:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.365156 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 05:54:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.365156 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 05:54:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.365156 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 05:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.016 and 1.117 (still bad) 2011-Dec-13 05:54:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 05:54:48 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-13 05:54:49 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-13 05:54:49 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-13 05:54:49 LOG5 end_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2011-Dec-13 05:54:49 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-13 05:54:49 LOG5 end_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2011-Dec-13 05:54:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-13 05:54:49 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-13 05:54:49 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-13 05:54:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-13 05:54:49 LOG5 begin_task: Level: (4) ID = <10261> Status = 0 0 0 0 ok 2011-Dec-13 05:54:49 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-13 05:54:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-13 05:54:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-13 05:54:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-13 05:54:49 LOG5 end_task: Level: (4) ID = <10261> Status = 0 0 0 0 ok 2011-Dec-13 05:54:49 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-13 05:54:49 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-13 05:54:49 LOG5 begin_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2011-Dec-13 05:54:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-13 05:54:49 LOG5 log_alfabeam: Parameters: 9.8774722222222202 20.579750000000001 10.912373 2011.9507087991483 -77.800003 2011-Dec-13 05:54:49 LOG4 log_alfabeam: ALFABEAM 0 9.877472222222222 20.579749999999979 2011-Dec-13 05:54:49 LOG4 log_alfabeam: ALFABEAM 1 9.875813615498613 20.669815509379216 2011-Dec-13 05:54:49 LOG4 log_alfabeam: ALFABEAM 2 9.870227566177173 20.609711661221912 2011-Dec-13 05:54:49 LOG4 log_alfabeam: ALFABEAM 3 9.871914834259183 20.519350056977459 2011-Dec-13 05:54:49 LOG4 log_alfabeam: ALFABEAM 4 9.879167465956739 20.490006459392088 2011-Dec-13 05:54:49 LOG4 log_alfabeam: ALFABEAM 5 9.884717766276308 20.549985707023087 2011-Dec-13 05:54:49 LOG4 log_alfabeam: ALFABEAM 6 9.883050980990301 20.639433542088383 2011-Dec-13 05:54:49 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-13 05:54:49 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-13 05:54:49 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-13 05:54:49 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_133 2011-Dec-13 05:54:49 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-13 05:54:49 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-13 05:54:49 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-13 05:54:49 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-13 05:54:49 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-13 05:54:49 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-13 05:54:49 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-13 05:54:49 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-13 05:54:49 LOG3 take_mock_data: PSET configuration: patternid=134700066 2011-Dec-13 05:54:49 LOG3 take_mock_data: PSET configuration: scanid=134700068 2011-Dec-13 05:54:49 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-13 05:54:49 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-13 05:54:49 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-13 05:54:49 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456365156.0 2011-Dec-13 05:54:49 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306365156.0 2011-Dec-13 05:54:49 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-13 05:54:49 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-13 05:54:49 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_133:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=134700066:scanid=134700068:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456365156.0:topobfreqhz=1306365156.0:filetype=1 2011-Dec-13 05:54:49 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-13 05:54:49 LOG5 begin_task: Level: (5) ID = <10263> Status = 0 0 0 0 ok 2011-Dec-13 05:54:49 LOG4 from_mock: From MOCK: psetok 2011-Dec-13 05:54:49 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-13 05:54:49 LOG5 end_task: Level: (5) ID = <10263> Status = 0 0 0 0 ok 2011-Dec-13 05:54:49 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-13 05:54:49 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-13 05:54:49 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-13 05:54:49 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-13 05:54:49 LOG5 begin_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2011-Dec-13 05:54:49 LOG4 from_mock: From MOCK: starok 2011-Dec-13 05:54:49 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-13 05:54:49 LOG5 end_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2011-Dec-13 05:54:49 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-13 05:54:49 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134700068 2011-Dec-13 05:54:49 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-13 05:54:49 LOG5 begin_task: Level: (5) ID = <10265> Status = 0 0 0 0 ok 2011-Dec-13 05:54:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 05:54:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-13 05:54:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35690.00 2011-Dec-13 05:54:50 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-13 05:54:50 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-13 05:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.525 (still bad) 2011-Dec-13 05:54:52 INFO2 got_mock_message: Mock spectrometer start file number is 01600 2011-Dec-13 05:54:52 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-13 05:54:52 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-13 05:54:52 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-13 05:54:52 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-13 05:54:52 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-13 05:54:52 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-13 05:54:52 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-13 05:54:52 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-13 05:54:52 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-13 05:54:52 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-13 05:54:52 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-13 05:54:52 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-13 05:54:52 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:54:52 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:54:52 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:54:52 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:54:52 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:54:52 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:54:52 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-13 05:54:54 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:54:55.00 2011-Dec-13 05:54:55 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323770095.00 Tue Dec 13 05:54:55 2011 2011-Dec-13 05:54:55 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-13 05:54:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.365156 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 05:54:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.365156 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 05:54:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.365156 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 05:54:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.365156 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 05:54:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.365156 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 05:54:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.365156 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 05:54:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.365156 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 05:54:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.365156 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 05:54:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.365156 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 05:54:55 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-13 05:54:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 05:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2011-Dec-13 05:55:00 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-13 05:55:01 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-13 05:55:01 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-13 05:55:01 LOG5 end_task: Level: (5) ID = <10265> Status = 0 0 0 0 ok 2011-Dec-13 05:55:01 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-13 05:55:01 LOG5 end_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2011-Dec-13 05:55:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-13 05:55:01 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-13 05:55:01 LOG5 finish_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2011-Dec-13 05:55:01 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-13 05:55:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 05:55:01 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-13 05:55:01 LOG5 end_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2011-Dec-13 05:55:01 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-13 05:55:01 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 101.08 and ZA = 14.54 2011-Dec-13 05:55:01 LOG3 track_source: Calling 'track_source AGES3193_p3_133 101.08 14.5362715324 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-13 05:55:01 START begin_task: Starting task 'sending tracking commands' 2011-Dec-13 05:55:01 LOG5 begin_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2011-Dec-13 05:55:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_133} INFO {Slewing to source 'AGES3193_p3_133' ...} 2011-Dec-13 05:55:01 INFO1 track_source: Starting to track AGES3193_p3_133 2011-Dec-13 05:55:01 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_133" 2011-Dec-13 05:55:01 LOG3 vw_send: To DATATAKING: set ra 101.08 2011-Dec-13 05:55:01 LOG3 vw_send: To DATATAKING: set dec 14.5362715324 2011-Dec-13 05:55:01 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-13 05:55:01 LOG3 vw_send: To DATATAKING: pnt tr 101.08 14.5362715324 -CF 2011-Dec-13 05:55:01 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 05:55:01 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-13 05:55:01 LOG5 finish_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2011-Dec-13 05:55:01 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-13 05:55:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 05:55:01 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-13 05:55:01 LOG5 end_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2011-Dec-13 05:55:01 LOG1 fixed_driftmap: Parameters: HA = +01:00:59.7 Start = 10:54:41.2 LST = 10:54:56.6 diff = -15.4 secs 2011-Dec-13 05:55:01 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2011-Dec-13 05:55:01 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-13 05:55:01 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-13 05:55:01 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-13 05:55:01 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-13 05:55:01 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-13 05:55:01 LOG5 begin_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2011-Dec-13 05:55:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-13 05:55:01 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-13 05:55:01 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-13 05:55:01 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-13 05:55:01 LOG3 take_mock_data: PSET configuration: obsnm=ep 2011-Dec-13 05:55:01 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_133 2011-Dec-13 05:55:01 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-13 05:55:01 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-13 05:55:01 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-13 05:55:01 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-13 05:55:01 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-13 05:55:01 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-13 05:55:01 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-13 05:55:01 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-13 05:55:01 LOG3 take_mock_data: PSET configuration: patternid=134700069 2011-Dec-13 05:55:01 LOG3 take_mock_data: PSET configuration: scanid=134700069 2011-Dec-13 05:55:01 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-13 05:55:01 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-13 05:55:01 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-13 05:55:01 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456365156.0 2011-Dec-13 05:55:01 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306365156.0 2011-Dec-13 05:55:01 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-13 05:55:01 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-13 05:55:01 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ep:object=AGES3193_p3_133:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=134700069:scanid=134700069:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456365156.0:topobfreqhz=1306365156.0:filetype=1 2011-Dec-13 05:55:01 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-13 05:55:01 LOG5 begin_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2011-Dec-13 05:55:01 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_133" 2011-Dec-13 05:55:01 LOG4 got_cormsg: From DATATAKING: set ra 101.08 2011-Dec-13 05:55:01 LOG4 got_cormsg: From DATATAKING: set dec 14.5362715324 2011-Dec-13 05:55:01 LOG4 from_mock: From MOCK: psetok 2011-Dec-13 05:55:01 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-13 05:55:01 LOG5 end_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2011-Dec-13 05:55:01 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-13 05:55:01 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-13 05:55:01 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-13 05:55:01 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-13 05:55:01 LOG5 begin_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2011-Dec-13 05:55:01 LOG4 got_cormsg: From DATATAKING: vw% 101.08 2011-Dec-13 05:55:01 LOG4 got_cormsg: From DATATAKING: vw% 14.5362715324 2011-Dec-13 05:55:01 LOG4 from_mock: From MOCK: starok 2011-Dec-13 05:55:01 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-13 05:55:01 LOG5 end_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2011-Dec-13 05:55:01 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-13 05:55:01 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 134700069 2011-Dec-13 05:55:02 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-13 05:55:02 LOG5 begin_task: Level: (4) ID = <10270> Status = 0 0 0 0 ok 2011-Dec-13 05:55:02 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:55:02 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-13 05:55:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 05:55:02 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-13 05:55:02 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-13 05:55:02 LOG4 got_cormsg: From DATATAKING: pnt tr 101.08 14.5362715324 -CF 2011-Dec-13 05:55:02 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-13 05:55:02 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-13 05:55:02 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 05:55:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-13 05:55:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35703.00 2011-Dec-13 05:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2011-Dec-13 05:55:04 INFO2 got_mock_message: Mock spectrometer start file number is 01700 2011-Dec-13 05:55:04 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-13 05:55:04 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2011-Dec-13 05:55:04 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-13 05:55:04 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-13 05:55:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-13 05:55:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-13 05:55:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-13 05:55:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-13 05:55:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-13 05:55:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-13 05:55:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-13 05:55:04 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-13 05:55:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 05:55:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 05:55:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 05:55:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 05:55:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 05:55:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 05:55:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.365156 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 05:55:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-13 05:55:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.365156 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 05:55:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.365156 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 05:55:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.365156 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 05:55:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.365156 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 05:55:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.365156 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 05:55:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.365156 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 05:55:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.365156 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 05:55:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.365156 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 05:55:05 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2011-Dec-13 05:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2011-Dec-13 05:55:07 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:55:07.01 2011-Dec-13 05:55:07 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323770107.01 Tue Dec 13 05:55:07 2011 2011-Dec-13 05:55:07 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-13 05:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-13 05:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-13 05:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2011-Dec-13 05:55:13 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2011-Dec-13 05:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2011-Dec-13 05:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-13 05:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-13 05:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-13 05:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-13 05:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-13 05:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-13 05:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2011-Dec-13 05:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-13 05:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.134 (still bad) 2011-Dec-13 05:55:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2011-Dec-13 05:55:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.942 1.126 0.948 0.933 2011-Dec-13 05:55:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 1.042 1.106 0.935 2011-Dec-13 05:55:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.879 0.967 1.047 0.941 2011-Dec-13 05:55:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 0.028 1.026 0.028 2011-Dec-13 05:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.126 (still bad) 2011-Dec-13 05:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.125 (still bad) 2011-Dec-13 05:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.122 (still bad) 2011-Dec-13 05:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.123 (still bad) 2011-Dec-13 05:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.128 (still bad) 2011-Dec-13 05:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.125 (still bad) 2011-Dec-13 05:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.128 (still bad) 2011-Dec-13 05:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-13 05:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.139 (still bad) 2011-Dec-13 05:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.144 (still bad) 2011-Dec-13 05:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.153 (still bad) 2011-Dec-13 05:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.148 (still bad) 2011-Dec-13 05:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.144 (still bad) 2011-Dec-13 05:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.139 (still bad) 2011-Dec-13 05:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2011-Dec-13 05:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2011-Dec-13 05:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2011-Dec-13 05:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-13 05:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-13 05:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-13 05:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2011-Dec-13 05:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-13 05:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-13 05:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-13 05:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-13 05:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-13 05:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-13 05:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2011-Dec-13 05:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2011-Dec-13 05:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-13 05:56:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2011-Dec-13 05:56:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 1.111 0.950 0.934 2011-Dec-13 05:56:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 1.045 1.107 0.936 2011-Dec-13 05:56:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.878 0.967 1.043 0.938 2011-Dec-13 05:56:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.029 1.023 0.019 2011-Dec-13 05:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-13 05:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2011-Dec-13 05:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-13 05:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-13 05:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 05:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-13 05:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-13 05:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-13 05:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-13 05:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2011-Dec-13 05:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-13 05:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-13 05:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 05:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-13 05:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.117 (still bad) 2011-Dec-13 05:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.130 (still bad) 2011-Dec-13 05:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-13 05:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 05:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-13 05:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 05:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.126 (still bad) 2011-Dec-13 05:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2011-Dec-13 05:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.114 (still bad) 2011-Dec-13 05:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 05:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-13 05:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-13 05:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2011-Dec-13 05:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-13 05:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 05:57:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-13 05:57:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 1.113 0.952 0.934 2011-Dec-13 05:57:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 1.047 1.111 0.940 2011-Dec-13 05:57:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.881 0.969 1.045 0.940 2011-Dec-13 05:57:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.020 1.025 0.020 2011-Dec-13 05:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-13 05:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-13 05:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2011-Dec-13 05:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-13 05:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-13 05:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-13 05:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2011-Dec-13 05:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-13 05:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2011-Dec-13 05:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-13 05:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-13 05:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-13 05:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-13 05:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-13 05:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-13 05:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-13 05:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2011-Dec-13 05:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-13 05:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2011-Dec-13 05:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2011-Dec-13 05:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-13 05:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-13 05:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 05:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-13 05:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-13 05:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2011-Dec-13 05:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-13 05:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-13 05:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-13 05:58:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-13 05:58:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 1.118 0.952 0.934 2011-Dec-13 05:58:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.958 1.049 1.107 0.937 2011-Dec-13 05:58:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.880 0.969 1.042 0.939 2011-Dec-13 05:58:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.021 1.026 0.022 2011-Dec-13 05:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-13 05:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-13 05:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.119 (still bad) 2011-Dec-13 05:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2011-Dec-13 05:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-13 05:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-13 05:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-13 05:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-13 05:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.143 (still bad) 2011-Dec-13 05:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-13 05:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-13 05:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-13 05:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-13 05:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-13 05:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.147 (still bad) 2011-Dec-13 05:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-13 05:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-13 05:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-13 05:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-13 05:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-13 05:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.139 (still bad) 2011-Dec-13 05:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-13 05:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-13 05:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-13 05:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 05:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-13 05:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.139 (still bad) 2011-Dec-13 05:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2011-Dec-13 05:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-13 05:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-13 05:59:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2011-Dec-13 05:59:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 1.117 0.951 0.934 2011-Dec-13 05:59:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.956 1.049 1.105 0.936 2011-Dec-13 05:59:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.881 0.968 1.043 0.938 2011-Dec-13 05:59:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.029 1.023 0.019 2011-Dec-13 05:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-13 05:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.136 (still bad) 2011-Dec-13 05:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-13 05:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-13 05:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-13 05:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-13 05:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-13 05:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.135 (still bad) 2011-Dec-13 05:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.122 (still bad) 2011-Dec-13 06:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.118 (still bad) 2011-Dec-13 06:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-13 06:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-13 06:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 06:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.140 (still bad) 2011-Dec-13 06:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-13 06:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-13 06:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2011-Dec-13 06:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-13 06:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-13 06:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.136 (still bad) 2011-Dec-13 06:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-13 06:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-13 06:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-13 06:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-13 06:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 06:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.128 (still bad) 2011-Dec-13 06:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.117 (still bad) 2011-Dec-13 06:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.117 (still bad) 2011-Dec-13 06:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.117 (still bad) 2011-Dec-13 06:00:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.029 < 0.75)! 2011-Dec-13 06:00:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 1.118 0.950 0.934 2011-Dec-13 06:00:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 1.048 1.107 0.936 2011-Dec-13 06:00:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.879 0.969 1.043 0.937 2011-Dec-13 06:00:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.029 1.024 0.029 2011-Dec-13 06:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.119 (still bad) 2011-Dec-13 06:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2011-Dec-13 06:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-13 06:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-13 06:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-13 06:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-13 06:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-13 06:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.131 (still bad) 2011-Dec-13 06:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-13 06:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-13 06:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-13 06:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 06:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 06:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.132 (still bad) 2011-Dec-13 06:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-13 06:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-13 06:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-13 06:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-13 06:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2011-Dec-13 06:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-13 06:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-13 06:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-13 06:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2011-Dec-13 06:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-13 06:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-13 06:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-13 06:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2011-Dec-13 06:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2011-Dec-13 06:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2011-Dec-13 06:01:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-13 06:01:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 1.117 0.949 0.934 2011-Dec-13 06:01:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 1.051 1.107 0.938 2011-Dec-13 06:01:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.879 0.971 1.041 0.937 2011-Dec-13 06:01:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.025 1.025 0.026 2011-Dec-13 06:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2011-Dec-13 06:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.144 (still bad) 2011-Dec-13 06:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-13 06:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-13 06:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-13 06:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 06:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 06:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.144 (still bad) 2011-Dec-13 06:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-13 06:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-13 06:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-13 06:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-13 06:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-13 06:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.143 (still bad) 2011-Dec-13 06:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 06:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-13 06:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-13 06:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-13 06:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-13 06:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2011-Dec-13 06:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-13 06:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-13 06:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-13 06:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-13 06:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-13 06:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-13 06:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-13 06:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-13 06:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-13 06:02:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-13 06:02:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.941 1.119 0.955 0.939 2011-Dec-13 06:02:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.958 1.052 1.107 0.936 2011-Dec-13 06:02:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.878 0.969 1.042 0.938 2011-Dec-13 06:02:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.029 1.023 0.020 2011-Dec-13 06:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-13 06:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2011-Dec-13 06:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-13 06:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-13 06:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-13 06:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-13 06:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 06:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-13 06:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-13 06:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-13 06:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 06:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-13 06:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 06:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.123 (still bad) 2011-Dec-13 06:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-13 06:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-13 06:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-13 06:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-13 06:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-13 06:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2011-Dec-13 06:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-13 06:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-13 06:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-13 06:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-13 06:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-13 06:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.122 (still bad) 2011-Dec-13 06:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2011-Dec-13 06:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2011-Dec-13 06:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2011-Dec-13 06:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-13 06:03:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2011-Dec-13 06:03:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 1.116 0.950 0.936 2011-Dec-13 06:03:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.957 1.049 1.107 0.937 2011-Dec-13 06:03:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.879 0.973 1.042 0.940 2011-Dec-13 06:03:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.028 1.033 0.029 2011-Dec-13 06:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.122 (still bad) 2011-Dec-13 06:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2011-Dec-13 06:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-13 06:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-13 06:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2011-Dec-13 06:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.134 (still bad) 2011-Dec-13 06:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.118 (still bad) 2011-Dec-13 06:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.114 (still bad) 2011-Dec-13 06:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.116 (still bad) 2011-Dec-13 06:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.112 (still bad) 2011-Dec-13 06:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.114 (still bad) 2011-Dec-13 06:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.130 (still bad) 2011-Dec-13 06:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2011-Dec-13 06:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-13 06:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-13 06:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-13 06:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2011-Dec-13 06:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.128 (still bad) 2011-Dec-13 06:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.120 (still bad) 2011-Dec-13 06:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2011-Dec-13 06:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2011-Dec-13 06:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-13 06:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-13 06:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.129 (still bad) 2011-Dec-13 06:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2011-Dec-13 06:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2011-Dec-13 06:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2011-Dec-13 06:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-13 06:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-13 06:04:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2011-Dec-13 06:04:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 1.127 0.955 0.941 2011-Dec-13 06:04:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.956 1.050 1.111 0.939 2011-Dec-13 06:04:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.882 0.974 1.044 0.942 2011-Dec-13 06:04:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.028 1.036 0.029 2011-Dec-13 06:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-13 06:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-13 06:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-13 06:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-13 06:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-13 06:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.125 (still bad) 2011-Dec-13 06:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-13 06:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-13 06:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2011-Dec-13 06:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-13 06:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-13 06:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2011-Dec-13 06:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-13 06:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2011-Dec-13 06:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-13 06:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2011-Dec-13 06:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2011-Dec-13 06:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-13 06:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.122 (still bad) 2011-Dec-13 06:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-13 06:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-13 06:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-13 06:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.120 (still bad) 2011-Dec-13 06:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.128 (still bad) 2011-Dec-13 06:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2011-Dec-13 06:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.114 (still bad) 2011-Dec-13 06:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2011-Dec-13 06:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2011-Dec-13 06:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2011-Dec-13 06:05:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2011-Dec-13 06:05:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.943 1.119 0.960 0.943 2011-Dec-13 06:05:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.958 1.047 1.109 0.938 2011-Dec-13 06:05:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.884 0.979 1.042 0.940 2011-Dec-13 06:05:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.028 1.030 0.028 2011-Dec-13 06:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2011-Dec-13 06:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-13 06:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-13 06:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2011-Dec-13 06:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.121 (still bad) 2011-Dec-13 06:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2011-Dec-13 06:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2011-Dec-13 06:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.124 (still bad) 2011-Dec-13 06:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2011-Dec-13 06:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2011-Dec-13 06:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.127 (still bad) 2011-Dec-13 06:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.123 (still bad) 2011-Dec-13 06:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2011-Dec-13 06:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2011-Dec-13 06:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2011-Dec-13 06:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2011-Dec-13 06:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.131 (still bad) 2011-Dec-13 06:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.137 (still bad) 2011-Dec-13 06:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.136 (still bad) 2011-Dec-13 06:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.139 (still bad) 2011-Dec-13 06:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.136 (still bad) 2011-Dec-13 06:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.130 (still bad) 2011-Dec-13 06:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.127 (still bad) 2011-Dec-13 06:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2011-Dec-13 06:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2011-Dec-13 06:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2011-Dec-13 06:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2011-Dec-13 06:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2011-Dec-13 06:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2011-Dec-13 06:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.124 (still bad) 2011-Dec-13 06:06:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-13 06:06:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 1.119 0.948 0.934 2011-Dec-13 06:06:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 1.046 1.120 0.945 2011-Dec-13 06:06:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.880 0.970 1.036 0.937 2011-Dec-13 06:06:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.026 1.023 0.027 2011-Dec-13 06:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2011-Dec-13 06:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2011-Dec-13 06:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2011-Dec-13 06:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2011-Dec-13 06:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2011-Dec-13 06:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-13 06:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-13 06:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2011-Dec-13 06:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2011-Dec-13 06:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-13 06:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-13 06:07:14 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-13 06:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-13 06:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-13 06:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2011-Dec-13 06:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2011-Dec-13 06:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.114 (still bad) 2011-Dec-13 06:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2011-Dec-13 06:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2011-Dec-13 06:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2011-Dec-13 06:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2011-Dec-13 06:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.124 (still bad) 2011-Dec-13 06:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-13 06:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-13 06:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-13 06:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2011-Dec-13 06:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2011-Dec-13 06:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.128 (still bad) 2011-Dec-13 06:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2011-Dec-13 06:07:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-13 06:07:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 1.114 0.945 0.933 2011-Dec-13 06:07:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 1.043 1.106 0.935 2011-Dec-13 06:07:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.877 0.968 1.039 0.938 2011-Dec-13 06:07:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.026 1.022 0.026 2011-Dec-13 06:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2011-Dec-13 06:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2011-Dec-13 06:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2011-Dec-13 06:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2011-Dec-13 06:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2011-Dec-13 06:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2011-Dec-13 06:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2011-Dec-13 06:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.113 (still bad) 2011-Dec-13 06:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2011-Dec-13 06:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2011-Dec-13 06:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-13 06:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-13 06:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-13 06:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-13 06:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-13 06:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-13 06:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-13 06:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2011-Dec-13 06:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-13 06:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-13 06:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-13 06:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-13 06:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2011-Dec-13 06:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-13 06:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2011-Dec-13 06:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2011-Dec-13 06:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2011-Dec-13 06:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2011-Dec-13 06:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2011-Dec-13 06:08:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-13 06:08:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 1.112 0.948 0.932 2011-Dec-13 06:08:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 1.048 1.108 0.936 2011-Dec-13 06:08:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.878 0.969 1.060 0.956 2011-Dec-13 06:08:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.938 0.023 1.023 0.023 2011-Dec-13 06:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-13 06:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2011-Dec-13 06:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-13 06:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2011-Dec-13 06:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2011-Dec-13 06:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-13 06:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.128 (still bad) 2011-Dec-13 06:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.131 (still bad) 2011-Dec-13 06:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-13 06:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.149 (still bad) 2011-Dec-13 06:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-13 06:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-13 06:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.146 (still bad) 2011-Dec-13 06:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-13 06:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-13 06:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-13 06:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2011-Dec-13 06:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2011-Dec-13 06:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2011-Dec-13 06:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.112 (still bad) 2011-Dec-13 06:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2011-Dec-13 06:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2011-Dec-13 06:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.114 (still bad) 2011-Dec-13 06:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2011-Dec-13 06:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2011-Dec-13 06:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2011-Dec-13 06:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2011-Dec-13 06:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2011-Dec-13 06:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2011-Dec-13 06:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-13 06:09:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-13 06:09:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 1.119 0.952 0.936 2011-Dec-13 06:09:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.956 1.048 1.111 0.938 2011-Dec-13 06:09:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.881 0.977 1.039 0.938 2011-Dec-13 06:09:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.023 1.027 0.024 2011-Dec-13 06:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.113 (still bad) 2011-Dec-13 06:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2011-Dec-13 06:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2011-Dec-13 06:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2011-Dec-13 06:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.114 (still bad) 2011-Dec-13 06:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2011-Dec-13 06:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.115 (still bad) 2011-Dec-13 06:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.116 (still bad) 2011-Dec-13 06:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.128 (still bad) 2011-Dec-13 06:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2011-Dec-13 06:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.113 (still bad) 2011-Dec-13 06:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2011-Dec-13 06:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2011-Dec-13 06:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2011-Dec-13 06:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.128 (still bad) 2011-Dec-13 06:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2011-Dec-13 06:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2011-Dec-13 06:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2011-Dec-13 06:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2011-Dec-13 06:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2011-Dec-13 06:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2011-Dec-13 06:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2011-Dec-13 06:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2011-Dec-13 06:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2011-Dec-13 06:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2011-Dec-13 06:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2011-Dec-13 06:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-13 06:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-13 06:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2011-Dec-13 06:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-13 06:10:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-13 06:10:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 1.120 0.951 0.934 2011-Dec-13 06:10:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 1.046 1.106 0.934 2011-Dec-13 06:10:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.877 0.968 1.038 0.937 2011-Dec-13 06:10:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.025 1.022 0.025 2011-Dec-13 06:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2011-Dec-13 06:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2011-Dec-13 06:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2011-Dec-13 06:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2011-Dec-13 06:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2011-Dec-13 06:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2011-Dec-13 06:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2011-Dec-13 06:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-13 06:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2011-Dec-13 06:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-13 06:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2011-Dec-13 06:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2011-Dec-13 06:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2011-Dec-13 06:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-13 06:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2011-Dec-13 06:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2011-Dec-13 06:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-13 06:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2011-Dec-13 06:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-13 06:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-13 06:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2011-Dec-13 06:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2011-Dec-13 06:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-13 06:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2011-Dec-13 06:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-13 06:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-13 06:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2011-Dec-13 06:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-13 06:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2011-Dec-13 06:11:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-13 06:11:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 1.118 0.949 0.933 2011-Dec-13 06:11:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 1.045 1.106 0.935 2011-Dec-13 06:11:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.876 0.970 1.038 0.937 2011-Dec-13 06:11:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.025 1.024 0.026 2011-Dec-13 06:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2011-Dec-13 06:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2011-Dec-13 06:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2011-Dec-13 06:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2011-Dec-13 06:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2011-Dec-13 06:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2011-Dec-13 06:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.129 (still bad) 2011-Dec-13 06:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2011-Dec-13 06:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-13 06:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-13 06:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2011-Dec-13 06:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-13 06:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.125 (still bad) 2011-Dec-13 06:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2011-Dec-13 06:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2011-Dec-13 06:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2011-Dec-13 06:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2011-Dec-13 06:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2011-Dec-13 06:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2011-Dec-13 06:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2011-Dec-13 06:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2011-Dec-13 06:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2011-Dec-13 06:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2011-Dec-13 06:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2011-Dec-13 06:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-13 06:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2011-Dec-13 06:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2011-Dec-13 06:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-13 06:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.116 (still bad) 2011-Dec-13 06:12:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-13 06:12:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 1.117 0.950 0.934 2011-Dec-13 06:12:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 1.046 1.105 0.934 2011-Dec-13 06:12:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.877 0.969 1.041 0.938 2011-Dec-13 06:12:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.024 1.023 0.024 2011-Dec-13 06:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2011-Dec-13 06:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-13 06:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-13 06:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-13 06:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-13 06:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-13 06:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2011-Dec-13 06:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-13 06:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2011-Dec-13 06:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2011-Dec-13 06:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-13 06:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2011-Dec-13 06:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2011-Dec-13 06:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2011-Dec-13 06:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2011-Dec-13 06:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2011-Dec-13 06:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.114 (still bad) 2011-Dec-13 06:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2011-Dec-13 06:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2011-Dec-13 06:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2011-Dec-13 06:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2011-Dec-13 06:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-13 06:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2011-Dec-13 06:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2011-Dec-13 06:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2011-Dec-13 06:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2011-Dec-13 06:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-13 06:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2011-Dec-13 06:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-13 06:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-13 06:14:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-13 06:14:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 1.129 0.956 0.941 2011-Dec-13 06:14:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.957 1.052 1.113 0.941 2011-Dec-13 06:14:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.881 0.975 1.041 0.940 2011-Dec-13 06:14:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.026 1.030 0.026 2011-Dec-13 06:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2011-Dec-13 06:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2011-Dec-13 06:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2011-Dec-13 06:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.114 (still bad) 2011-Dec-13 06:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2011-Dec-13 06:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.128 (still bad) 2011-Dec-13 06:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2011-Dec-13 06:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2011-Dec-13 06:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2011-Dec-13 06:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-13 06:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-13 06:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.132 (still bad) 2011-Dec-13 06:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2011-Dec-13 06:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2011-Dec-13 06:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2011-Dec-13 06:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2011-Dec-13 06:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2011-Dec-13 06:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.128 (still bad) 2011-Dec-13 06:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2011-Dec-13 06:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2011-Dec-13 06:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2011-Dec-13 06:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2011-Dec-13 06:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2011-Dec-13 06:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.128 (still bad) 2011-Dec-13 06:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2011-Dec-13 06:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2011-Dec-13 06:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-13 06:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-13 06:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2011-Dec-13 06:15:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-13 06:15:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 1.128 0.958 0.943 2011-Dec-13 06:15:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.961 1.058 1.114 0.944 2011-Dec-13 06:15:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.884 0.978 1.050 0.947 2011-Dec-13 06:15:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.022 1.033 0.022 2011-Dec-13 06:15:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 06:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-13 06:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-13 06:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-13 06:15:08 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-13 06:15:08 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-13 06:15:08 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-13 06:15:08 LOG5 end_task: Level: (4) ID = <10270> Status = 0 0 0 0 ok 2011-Dec-13 06:15:08 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-13 06:15:08 LOG5 end_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2011-Dec-13 06:15:08 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-13 06:15:08 LOG5 finish_task: Level: (2) ID = <10230> Status = 0 0 0 0 ok 2011-Dec-13 06:15:08 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-13 06:15:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-13 06:15:08 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-13 06:15:08 LOG5 end_task: Level: (2) ID = <10230> Status = 0 0 0 0 ok 2011-Dec-13 06:15:08 COMMAND run_command_line: EXECUTING command 48: 'ENDIF' 2011-Dec-13 06:15:08 COMMAND run_command_line: EXECUTING command 55: 'LOAD togs_cima31.conf' 2011-Dec-13 06:15:08 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2011-Dec-13 06:15:08 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-13 06:15:08 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2011-Dec-13 06:15:08 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima31.conf' 2011-Dec-13 06:15:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2011-Dec-13 06:15:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2011-Dec-13 06:15:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2011-Dec-13 06:15:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2011-Dec-13 06:15:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2011-Dec-13 06:15:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2011-Dec-13 06:15:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2011-Dec-13 06:15:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2011-Dec-13 06:15:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2011-Dec-13 06:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2011-Dec-13 06:15:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2011-Dec-13 06:15:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2011-Dec-13 06:15:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-13 06:15:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-13 06:15:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-13 06:15:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-13 06:15:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2011-Dec-13 06:15:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2011-Dec-13 06:15:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2011-Dec-13 06:15:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2011-Dec-13 06:15:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2011-Dec-13 06:15:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2011-Dec-13 06:15:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2011-Dec-13 06:15:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2011-Dec-13 06:15:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-13 06:15:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-13 06:15:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-13 06:15:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-13 06:15:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2011-Dec-13 06:15:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2011-Dec-13 06:15:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2011-Dec-13 06:15:10 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-13 06:15:10 BEGIN begin_task: Starting task 'configuring IF/LO path' 2011-Dec-13 06:15:10 LOG5 begin_task: Level: (2) ID = <10271> Status = 0 0 0 0 ok 2011-Dec-13 06:15:10 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2011-Dec-13 06:15:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2011-Dec-13 06:15:10 LOG1 config_iflo: Receiver ALFA already selected 2011-Dec-13 06:15:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-13 06:15:10 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-13 06:15:10 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-13 06:15:10 LOG5 begin_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2011-Dec-13 06:15:10 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-13 06:15:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-13 06:15:10 LOG5 end_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2011-Dec-13 06:15:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-13 06:15:10 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-13 06:15:10 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2011-Dec-13 06:15:10 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2011-Dec-13 06:15:10 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2011-Dec-13 06:15:10 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2011-Dec-13 06:15:10 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2011-Dec-13 06:15:10 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2011-Dec-13 06:15:10 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2011-Dec-13 06:15:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2011-Dec-13 06:15:10 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2011-Dec-13 06:15:10 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2011-Dec-13 06:15:10 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2011-Dec-13 06:15:10 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2011-Dec-13 06:15:10 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2011-Dec-13 06:15:10 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2011-Dec-13 06:15:10 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2011-Dec-13 06:15:10 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2011-Dec-13 06:15:10 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2011-Dec-13 06:15:10 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2011-Dec-13 06:15:10 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2011-Dec-13 06:15:10 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2011-Dec-13 06:15:10 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2011-Dec-13 06:15:10 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2011-Dec-13 06:15:10 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2011-Dec-13 06:15:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:15:10 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2011-Dec-13 06:15:10 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2011-Dec-13 06:15:10 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2011-Dec-13 06:15:10 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2011-Dec-13 06:15:10 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2011-Dec-13 06:15:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2011-Dec-13 06:15:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 06:15:10 START begin_task: Starting task 'waiting on configuring IF/LO path' 2011-Dec-13 06:15:10 LOG5 begin_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2011-Dec-13 06:15:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2011-Dec-13 06:15:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2011-Dec-13 06:15:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:15:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 06:15:11 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:15:11 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:15:11 LOG4 got_cormsg: From DATATAKING: vw% DONE 2011-Dec-13 06:15:11 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2011-Dec-13 06:15:11 LOG5 end_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2011-Dec-13 06:15:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2011-Dec-13 06:15:11 STOP finish_task: Finishing task 'configuring IF/LO path' 2011-Dec-13 06:15:11 LOG5 finish_task: Level: (2) ID = <10271> Status = 0 0 0 0 ok 2011-Dec-13 06:15:11 DONE finish_task: DONE finished configuration: IF/LO path 2011-Dec-13 06:15:11 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-13 06:15:11 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2011-Dec-13 06:15:11 LOG5 end_task: Level: (2) ID = <10271> Status = 0 0 0 0 ok 2011-Dec-13 06:15:11 BEGIN begin_task: Starting task 'configuring WAPPs' 2011-Dec-13 06:15:11 LOG5 begin_task: Level: (2) ID = <10274> Status = 0 0 0 0 ok 2011-Dec-13 06:15:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2011-Dec-13 06:15:11 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2011-Dec-13 06:15:11 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Dec-13 06:15:11 START begin_task: Starting task 'selecting calibration port' 2011-Dec-13 06:15:11 LOG5 begin_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2011-Dec-13 06:15:12 LOG3 vw_send: To DATATAKING: calport 3 2011-Dec-13 06:15:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Dec-13 06:15:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 06:15:12 START begin_task: Starting task 'waiting on calport' 2011-Dec-13 06:15:12 LOG5 begin_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2011-Dec-13 06:15:12 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:15:12 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Dec-13 06:15:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 06:15:12 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:15:12 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-13 06:15:12 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Dec-13 06:15:12 LOG5 end_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2011-Dec-13 06:15:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Dec-13 06:15:12 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Dec-13 06:15:12 LOG5 end_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2011-Dec-13 06:15:12 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-13 06:15:12 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-13 06:15:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-13 06:15:12 LOG5 begin_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2011-Dec-13 06:15:12 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:15:12 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-13 06:15:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-13 06:15:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-13 06:15:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-13 06:15:12 LOG5 end_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2011-Dec-13 06:15:12 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2011-Dec-13 06:15:12 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2011-Dec-13 06:15:12 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2011-Dec-13 06:15:12 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2011-Dec-13 06:15:12 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2011-Dec-13 06:15:12 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2011-Dec-13 06:15:12 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2011-Dec-13 06:15:12 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2011-Dec-13 06:15:12 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ep 2011-Dec-13 06:15:12 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ep 2011-Dec-13 06:15:12 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ep 2011-Dec-13 06:15:12 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ep 2011-Dec-13 06:15:12 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Dec-13 06:15:12 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Dec-13 06:15:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-13 06:15:12 LOG5 begin_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2011-Dec-13 06:15:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2011-Dec-13 06:15:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2011-Dec-13 06:15:12 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-13 06:15:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ep' 2011-Dec-13 06:15:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-13 06:15:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-13 06:15:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-13 06:15:12 LOG5 end_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2011-Dec-13 06:15:12 LOG3 sock_errsend: To WAPPDATA: FLUSH 2011-Dec-13 06:15:12 STOP finish_task: Finishing task 'configuring WAPPs' 2011-Dec-13 06:15:12 LOG5 finish_task: Level: (2) ID = <10274> Status = 0 0 0 0 ok 2011-Dec-13 06:15:12 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2011-Dec-13 06:15:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-13 06:15:12 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2011-Dec-13 06:15:13 LOG5 end_task: Level: (2) ID = <10274> Status = 0 0 0 0 ok 2011-Dec-13 06:15:13 COMMAND run_command_line: EXECUTING command 56: 'TRACKCURPOS' 2011-Dec-13 06:15:13 BEGIN begin_task: Starting task 'tracking current position' 2011-Dec-13 06:15:13 LOG5 begin_task: Level: (2) ID = <10279> Status = 0 0 0 0 ok 2011-Dec-13 06:15:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2011-Dec-13 06:15:13 INFO1 track_current_pos: Starting to track the current commanded position RA = 10:13:32.4 and Dec = +20:35:10.9 2011-Dec-13 06:15:13 LOG3 track_source: Calling 'track_source Cur-pos 101332.4 203510.9 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2011-Dec-13 06:15:13 START begin_task: Starting task 'sending tracking commands' 2011-Dec-13 06:15:13 LOG5 begin_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2011-Dec-13 06:15:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2011-Dec-13 06:15:13 INFO1 track_source: Starting to track Cur-pos 2011-Dec-13 06:15:13 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2011-Dec-13 06:15:13 LOG3 vw_send: To DATATAKING: set ra 101332.4 2011-Dec-13 06:15:13 LOG3 vw_send: To DATATAKING: set dec 203510.9 2011-Dec-13 06:15:13 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-13 06:15:13 LOG3 vw_send: To DATATAKING: pnt tr 101332.4 203510.9 -CJ 2011-Dec-13 06:15:13 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2011-Dec-13 06:15:13 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-13 06:15:13 LOG5 finish_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2011-Dec-13 06:15:13 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-13 06:15:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 06:15:13 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-13 06:15:13 LOG5 end_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2011-Dec-13 06:15:13 START begin_task: Starting task 'waiting on telescope' 2011-Dec-13 06:15:13 LOG5 begin_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2011-Dec-13 06:15:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-13 06:15:13 LOG3 waittrk: Start waittrk 5 2011-Dec-13 06:15:13 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-13 06:15:13 LOG5 begin_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2011-Dec-13 06:15:13 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2011-Dec-13 06:15:13 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2011-Dec-13 06:15:13 LOG4 got_cormsg: From DATATAKING: set ra 101332.4 2011-Dec-13 06:15:13 LOG4 got_cormsg: From DATATAKING: set dec 203510.9 2011-Dec-13 06:15:13 LOG4 got_cormsg: From DATATAKING: vw% 101332.4 2011-Dec-13 06:15:13 LOG4 got_cormsg: From DATATAKING: vw% 203510.9 2011-Dec-13 06:15:13 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:15:13 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-13 06:15:13 LOG4 got_cormsg: From DATATAKING: pnt tr 101332.4 203510.9 -CJ 2011-Dec-13 06:15:13 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2011-Dec-13 06:15:13 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-13 06:15:13 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:15:18 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-13 06:15:18 LOG5 end_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2011-Dec-13 06:15:18 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-13 06:15:18 LOG5 begin_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2011-Dec-13 06:15:22 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-13 06:15:22 LOG5 end_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2011-Dec-13 06:15:22 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-13 06:15:22 INFO2 waittrk: Now tracking Cur-pos 2011-Dec-13 06:15:22 LOG4 waittrk: Current telescope position: Az = 100.80 ZA = 14.59 2011-Dec-13 06:15:22 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-13 06:15:22 LOG5 finish_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2011-Dec-13 06:15:22 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-13 06:15:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 06:15:22 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-13 06:15:22 LOG5 end_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2011-Dec-13 06:15:22 STOP finish_task: Finishing task 'tracking current position' 2011-Dec-13 06:15:22 LOG5 finish_task: Level: (2) ID = <10279> Status = 0 0 0 0 ok 2011-Dec-13 06:15:22 DONE finish_task: DONE finished tracking: current position 2011-Dec-13 06:15:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-13 06:15:22 END end_task: Finishing task 'tracking current position' with status 'OK' 2011-Dec-13 06:15:22 LOG5 end_task: Level: (2) ID = <10279> Status = 0 0 0 0 ok 2011-Dec-13 06:15:22 COMMAND run_command_line: EXECUTING command 57: 'ALFAANGLE 19' 2011-Dec-13 06:15:22 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2011-Dec-13 06:15:22 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2011-Dec-13 06:15:23 LOG5 begin_task: Level: (2) ID = <10284> Status = 0 0 0 0 ok 2011-Dec-13 06:15:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2011-Dec-13 06:15:23 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2011-Dec-13 06:15:23 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2011-Dec-13 06:15:23 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-13 06:15:23 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-13 06:15:23 LOG5 begin_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2011-Dec-13 06:16:17 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-13 06:16:17 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2011-Dec-13 06:16:17 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-13 06:16:17 LOG5 end_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2011-Dec-13 06:16:17 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-13 06:16:17 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2011-Dec-13 06:16:17 LOG5 finish_task: Level: (2) ID = <10284> Status = 0 0 0 0 ok 2011-Dec-13 06:16:17 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2011-Dec-13 06:16:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-13 06:16:17 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2011-Dec-13 06:16:17 LOG5 end_task: Level: (2) ID = <10284> Status = 0 0 0 0 ok 2011-Dec-13 06:16:17 COMMAND run_command_line: EXECUTING command 61: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2011-Dec-13 06:16:17 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2011-Dec-13 06:16:18 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-13 06:16:18 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2011-Dec-13 06:16:18 BEGIN begin_task: Starting task 'smart frequency switching' 2011-Dec-13 06:16:18 LOG5 begin_task: Level: (2) ID = <10286> Status = 0 0 0 0 ok 2011-Dec-13 06:16:18 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2011-Dec-13 06:16:18 INFO1 smartfreq: Starting pattern: Smart frequency switching 2011-Dec-13 06:16:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2011-Dec-13 06:16:18 START begin_task: Starting task 'selecting calibration type' 2011-Dec-13 06:16:18 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2011-Dec-13 06:16:18 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-13 06:16:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-13 06:16:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 06:16:18 START begin_task: Starting task 'waiting on setcal' 2011-Dec-13 06:16:18 LOG5 begin_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2011-Dec-13 06:16:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-13 06:16:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 06:16:18 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:16:18 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-13 06:16:18 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-13 06:16:18 LOG5 end_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2011-Dec-13 06:16:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-13 06:16:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-13 06:16:18 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-13 06:16:18 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-13 06:16:18 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2011-Dec-13 06:16:18 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:16:18 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-13 06:16:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-13 06:16:18 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2011-Dec-13 06:16:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-13 06:16:18 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-13 06:16:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-13 06:16:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-13 06:16:18 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-13 06:16:18 LOG5 begin_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2011-Dec-13 06:16:18 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-13 06:16:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-13 06:16:18 LOG5 end_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2011-Dec-13 06:16:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-13 06:16:18 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-13 06:16:18 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-13 06:16:18 LOG5 end_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2011-Dec-13 06:16:18 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ep 2011-Dec-13 06:16:18 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ep 2011-Dec-13 06:16:18 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ep 2011-Dec-13 06:16:18 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ep 2011-Dec-13 06:16:18 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2011-Dec-13 06:16:18 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-13 06:16:18 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2011-Dec-13 06:16:18 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-13 06:16:18 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-13 06:16:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-13 06:16:18 LOG5 begin_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2011-Dec-13 06:16:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ep' 2011-Dec-13 06:16:18 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-13 06:16:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-13 06:16:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-13 06:16:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-13 06:16:18 LOG5 end_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2011-Dec-13 06:16:18 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2011-Dec-13 06:16:18 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-13 06:16:18 LOG5 begin_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2011-Dec-13 06:16:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2011-Dec-13 06:16:18 INFO2 adjust_power: Starting to adjust WAPP power 2011-Dec-13 06:16:18 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-13 06:16:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-13 06:16:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 06:16:19 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-13 06:16:19 LOG5 begin_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2011-Dec-13 06:16:19 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-13 06:16:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-13 06:16:19 NOTE WAPPDATA-new_file: New FITS file: wapp.20111213.a2048.0006.fits 2011-Dec-13 06:16:19 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111213.a2048.0006.fits} 2011-Dec-13 06:16:20 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:16:20 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-13 06:16:20 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-13 06:16:20 LOG5 end_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2011-Dec-13 06:16:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-13 06:16:20 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-13 06:16:20 LOG5 begin_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2011-Dec-13 06:16:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-13 06:16:20 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-13 06:16:20 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-13 06:16:20 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-13 06:16:20 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-13 06:16:20 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-13 06:16:20 LOG5 begin_task: Level: (5) ID = <10295> Status = 0 0 0 0 ok 2011-Dec-13 06:16:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-13 06:16:20 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:16:21 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 8 6 dB 2011-Dec-13 06:16:21 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 3 3 dB 2011-Dec-13 06:16:21 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 3 dB 2011-Dec-13 06:16:21 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2011-Dec-13 06:16:21 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-13 06:16:21 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-13 06:16:21 LOG5 end_task: Level: (5) ID = <10295> Status = 0 0 0 0 ok 2011-Dec-13 06:16:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.930 0.905 ALFA beam 1: 0.975 1.029 2011-Dec-13 06:16:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.937 1.085 ALFA beam 3: 1.102 0.945 2011-Dec-13 06:16:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.873 0.956 ALFA beam 5: 0.981 1.123 2011-Dec-13 06:16:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.931 0.014 ALFA beam 7: 1.014 0.014 2011-Dec-13 06:16:21 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-13 06:16:21 LOG5 finish_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2011-Dec-13 06:16:21 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-13 06:16:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 06:16:21 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-13 06:16:21 LOG5 end_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2011-Dec-13 06:16:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-13 06:16:21 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-13 06:16:21 LOG5 finish_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2011-Dec-13 06:16:21 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2011-Dec-13 06:16:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-13 06:16:21 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-13 06:16:21 LOG5 end_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2011-Dec-13 06:16:21 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2011-Dec-13 06:16:21 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-13 06:16:21 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2011-Dec-13 06:16:21 LOG5 antvel: Calling 'antvel 101332.400000 203510.900000 J Topocentric 0' 2011-Dec-13 06:16:21 LOG2 antvel: Precessing RA = 10:13:32.4 Dec = +20:35:10.9 Epoch = 2011.95075 J 2011-Dec-13 06:16:21 LOG2 antvel: Computed apparent RA = 10:14:13.3 Dec = +20:31:23.6 2011-Dec-13 06:16:21 LOG2 antvel: Parameters to Doppler: Topocentric 36980 2011 347 0.0 2011-Dec-13 06:16:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-13 06:16:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2011-Dec-13 06:16:21 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2011-Dec-13 06:16:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-13 06:16:21 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-13 06:16:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-13 06:16:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:16:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2011-Dec-13 06:16:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-13 06:16:21 LOG5 begin_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2011-Dec-13 06:16:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-13 06:16:21 LOG5 log_alfabeam: Parameters: 10.225666666666665 20.58636111111111 11.272244 2011.9507497401578 18.999933 2011-Dec-13 06:16:21 LOG4 log_alfabeam: ALFABEAM 0 10.225666666666671 20.586361111111110 2011-Dec-13 06:16:21 LOG4 log_alfabeam: ALFABEAM 1 10.233210516407269 20.593057180911117 2011-Dec-13 06:16:21 LOG4 log_alfabeam: ALFABEAM 2 10.228762139070156 20.668640427221042 2011-Dec-13 06:16:21 LOG4 log_alfabeam: ALFABEAM 3 10.221212015382354 20.662303413901416 2011-Dec-13 06:16:21 LOG4 log_alfabeam: ALFABEAM 4 10.218123195764051 20.579349458767105 2011-Dec-13 06:16:21 LOG4 log_alfabeam: ALFABEAM 5 10.222606646350432 20.503625638642941 2011-Dec-13 06:16:21 LOG4 log_alfabeam: ALFABEAM 6 10.230143711312147 20.510995967781863 2011-Dec-13 06:16:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134700070 2011-Dec-13 06:16:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-13 06:16:22 LOG5 begin_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2011-Dec-13 06:16:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 06:16:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-13 06:16:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:16:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:16:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:16:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-13 06:16:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36983.00 2011-Dec-13 06:16:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 06:16:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:16:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:16:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 06:16:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 06:16:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 06:16:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 06:16:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 06:16:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 06:16:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-13 06:16:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 0.905 0.975 1.029 2011-Dec-13 06:16:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 1.085 1.102 0.945 2011-Dec-13 06:16:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.873 0.956 0.981 1.123 2011-Dec-13 06:16:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.014 1.014 0.014 2011-Dec-13 06:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.161 (still bad) 2011-Dec-13 06:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.157 (still bad) 2011-Dec-13 06:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.159 (still bad) 2011-Dec-13 06:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.157 (still bad) 2011-Dec-13 06:16:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 06:16:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-13 06:16:33 LOG5 end_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2011-Dec-13 06:16:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-13 06:16:33 LOG5 end_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2011-Dec-13 06:16:33 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2011-Dec-13 06:16:33 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-13 06:16:33 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2011-Dec-13 06:16:33 LOG5 antvel: Calling 'antvel 101332.400000 203510.900000 J Topocentric 0' 2011-Dec-13 06:16:33 LOG2 antvel: Precessing RA = 10:13:32.4 Dec = +20:35:10.9 Epoch = 2011.95075 J 2011-Dec-13 06:16:33 LOG2 antvel: Computed apparent RA = 10:14:13.3 Dec = +20:31:23.6 2011-Dec-13 06:16:33 LOG2 antvel: Parameters to Doppler: Topocentric 36993 2011 347 0.0 2011-Dec-13 06:16:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-13 06:16:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2011-Dec-13 06:16:33 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2011-Dec-13 06:16:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-13 06:16:33 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-13 06:16:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-13 06:16:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:16:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2011-Dec-13 06:16:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-13 06:16:33 LOG5 begin_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2011-Dec-13 06:16:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-13 06:16:33 LOG5 log_alfabeam: Parameters: 10.225666666666665 20.58636111111111 11.275865 2011.950750152103 18.999933 2011-Dec-13 06:16:33 LOG4 log_alfabeam: ALFABEAM 0 10.225666666666667 20.586361111111099 2011-Dec-13 06:16:33 LOG4 log_alfabeam: ALFABEAM 1 10.233210197822105 20.593128520731391 2011-Dec-13 06:16:33 LOG4 log_alfabeam: ALFABEAM 2 10.228758157287306 20.668670299002848 2011-Dec-13 06:16:33 LOG4 log_alfabeam: ALFABEAM 3 10.221208346904477 20.662260451462004 2011-Dec-13 06:16:33 LOG4 log_alfabeam: ALFABEAM 4 10.218123533894440 20.579278985162315 2011-Dec-13 06:16:33 LOG4 log_alfabeam: ALFABEAM 5 10.222610531639184 20.503597681173577 2011-Dec-13 06:16:33 LOG4 log_alfabeam: ALFABEAM 6 10.230147254432351 20.511036990837830 2011-Dec-13 06:16:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134700071 2011-Dec-13 06:16:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-13 06:16:34 LOG5 begin_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2011-Dec-13 06:16:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-13 06:16:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 06:16:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:16:34 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:16:34 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.155 (still bad) 2011-Dec-13 06:16:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-13 06:16:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36995.00 2011-Dec-13 06:16:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 06:16:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:16:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:16:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 06:16:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 06:16:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 06:16:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 06:16:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 06:16:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 06:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.155 (still bad) 2011-Dec-13 06:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.191 (still bad) 2011-Dec-13 06:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.187 (still bad) 2011-Dec-13 06:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.191 (still bad) 2011-Dec-13 06:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.190 (still bad) 2011-Dec-13 06:16:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 06:16:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-13 06:16:45 LOG5 end_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2011-Dec-13 06:16:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-13 06:16:45 LOG5 end_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2011-Dec-13 06:16:45 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2011-Dec-13 06:16:45 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-13 06:16:45 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2011-Dec-13 06:16:45 LOG5 antvel: Calling 'antvel 101332.400000 203510.900000 J Topocentric 0' 2011-Dec-13 06:16:45 LOG2 antvel: Precessing RA = 10:13:32.4 Dec = +20:35:10.9 Epoch = 2011.95075 J 2011-Dec-13 06:16:45 LOG2 antvel: Computed apparent RA = 10:14:13.3 Dec = +20:31:23.6 2011-Dec-13 06:16:45 LOG2 antvel: Parameters to Doppler: Topocentric 37005 2011 347 0.0 2011-Dec-13 06:16:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-13 06:16:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2011-Dec-13 06:16:45 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2011-Dec-13 06:16:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-13 06:16:45 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-13 06:16:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-13 06:16:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:16:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2011-Dec-13 06:16:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-13 06:16:45 LOG5 begin_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2011-Dec-13 06:16:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-13 06:16:45 LOG5 log_alfabeam: Parameters: 10.225666666666665 20.58636111111111 11.279208 2011.95075053236 18.999933 2011-Dec-13 06:16:45 LOG4 log_alfabeam: ALFABEAM 0 10.225666666666667 20.586361111111099 2011-Dec-13 06:16:45 LOG4 log_alfabeam: ALFABEAM 1 10.233209902124599 20.593194056695406 2011-Dec-13 06:16:45 LOG4 log_alfabeam: ALFABEAM 2 10.228754498047090 20.668697707402284 2011-Dec-13 06:16:45 LOG4 log_alfabeam: ALFABEAM 3 10.221204978628014 20.662220952910435 2011-Dec-13 06:16:45 LOG4 log_alfabeam: ALFABEAM 4 10.218123847473223 20.579214244029927 2011-Dec-13 06:16:45 LOG4 log_alfabeam: ALFABEAM 5 10.222614102229574 20.503572027629733 2011-Dec-13 06:16:45 LOG4 log_alfabeam: ALFABEAM 6 10.230150507845169 20.511074708665529 2011-Dec-13 06:16:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134700072 2011-Dec-13 06:16:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-13 06:16:46 LOG5 begin_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2011-Dec-13 06:16:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 06:16:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-13 06:16:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:16:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:16:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:16:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-13 06:16:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37007.00 2011-Dec-13 06:16:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.189 (still bad) 2011-Dec-13 06:16:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 06:16:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:16:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:16:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 06:16:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 06:16:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 06:16:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 06:16:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 06:16:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 06:16:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.199 (still bad) 2011-Dec-13 06:16:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.186 (still bad) 2011-Dec-13 06:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.187 (still bad) 2011-Dec-13 06:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.188 (still bad) 2011-Dec-13 06:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.185 (still bad) 2011-Dec-13 06:16:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 06:16:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-13 06:16:57 LOG5 end_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2011-Dec-13 06:16:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-13 06:16:57 LOG5 end_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2011-Dec-13 06:16:57 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2011-Dec-13 06:16:57 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-13 06:16:57 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2011-Dec-13 06:16:57 LOG5 antvel: Calling 'antvel 101332.400000 203510.900000 J Topocentric 0' 2011-Dec-13 06:16:57 LOG2 antvel: Precessing RA = 10:13:32.4 Dec = +20:35:10.9 Epoch = 2011.95075 J 2011-Dec-13 06:16:57 LOG2 antvel: Computed apparent RA = 10:14:13.3 Dec = +20:31:23.6 2011-Dec-13 06:16:57 LOG2 antvel: Parameters to Doppler: Topocentric 37017 2011 347 0.0 2011-Dec-13 06:16:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-13 06:16:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2011-Dec-13 06:16:57 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2011-Dec-13 06:16:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-13 06:16:57 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-13 06:16:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-13 06:16:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:16:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2011-Dec-13 06:16:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-13 06:16:57 LOG5 begin_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2011-Dec-13 06:16:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-13 06:16:57 LOG5 log_alfabeam: Parameters: 10.225666666666665 20.58636111111111 11.282550 2011.950750912617 18.999933 2011-Dec-13 06:16:57 LOG4 log_alfabeam: ALFABEAM 0 10.225666666666671 20.586361111111110 2011-Dec-13 06:16:57 LOG4 log_alfabeam: ALFABEAM 1 10.233209605036102 20.593259262465956 2011-Dec-13 06:16:57 LOG4 log_alfabeam: ALFABEAM 2 10.228750855917298 20.668724946185197 2011-Dec-13 06:16:57 LOG4 log_alfabeam: ALFABEAM 3 10.221201628987570 20.662181623600432 2011-Dec-13 06:16:57 LOG4 log_alfabeam: ALFABEAM 4 10.218124162282834 20.579149828211868 2011-Dec-13 06:16:57 LOG4 log_alfabeam: ALFABEAM 5 10.222617656151646 20.503546531318293 2011-Dec-13 06:16:57 LOG4 log_alfabeam: ALFABEAM 6 10.230153743481983 20.511112267080939 2011-Dec-13 06:16:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134700073 2011-Dec-13 06:16:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-13 06:16:58 LOG5 begin_task: Level: (4) ID = <10303> Status = 0 0 0 0 ok 2011-Dec-13 06:16:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 06:16:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-13 06:16:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:16:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:16:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:16:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-13 06:16:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37019.00 2011-Dec-13 06:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.188 (still bad) 2011-Dec-13 06:17:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 06:17:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:17:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:17:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 06:17:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 06:17:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 06:17:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 06:17:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 06:17:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 06:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.189 (still bad) 2011-Dec-13 06:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.177 (still bad) 2011-Dec-13 06:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.178 (still bad) 2011-Dec-13 06:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.180 (still bad) 2011-Dec-13 06:17:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 06:17:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-13 06:17:09 LOG5 end_task: Level: (4) ID = <10303> Status = 0 0 0 0 ok 2011-Dec-13 06:17:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-13 06:17:09 LOG5 end_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2011-Dec-13 06:17:09 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2011-Dec-13 06:17:09 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-13 06:17:09 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2011-Dec-13 06:17:09 LOG5 antvel: Calling 'antvel 101332.400000 203510.900000 J Topocentric 0' 2011-Dec-13 06:17:09 LOG2 antvel: Precessing RA = 10:13:32.4 Dec = +20:35:10.9 Epoch = 2011.95075 J 2011-Dec-13 06:17:09 LOG2 antvel: Computed apparent RA = 10:14:13.3 Dec = +20:31:23.6 2011-Dec-13 06:17:09 LOG2 antvel: Parameters to Doppler: Topocentric 37029 2011 347 0.0 2011-Dec-13 06:17:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-13 06:17:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2011-Dec-13 06:17:09 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2011-Dec-13 06:17:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-13 06:17:09 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-13 06:17:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-13 06:17:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:17:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2011-Dec-13 06:17:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-13 06:17:09 LOG5 begin_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2011-Dec-13 06:17:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-13 06:17:09 LOG5 log_alfabeam: Parameters: 10.225666666666665 20.58636111111111 11.285893 2011.950751292874 18.999933 2011-Dec-13 06:17:09 LOG4 log_alfabeam: ALFABEAM 0 10.225666666666667 20.586361111111106 2011-Dec-13 06:17:09 LOG4 log_alfabeam: ALFABEAM 1 10.233209306406174 20.593324179959033 2011-Dec-13 06:17:09 LOG4 log_alfabeam: ALFABEAM 2 10.228747228575685 20.668752033301619 2011-Dec-13 06:17:09 LOG4 log_alfabeam: ALFABEAM 3 10.221198295806506 20.662142438676096 2011-Dec-13 06:17:09 LOG4 log_alfabeam: ALFABEAM 4 10.218124478486221 20.579085696305693 2011-Dec-13 06:17:09 LOG4 log_alfabeam: ALFABEAM 5 10.222621195672124 20.503521175450881 2011-Dec-13 06:17:09 LOG4 log_alfabeam: ALFABEAM 6 10.230156963442557 20.511149689808867 2011-Dec-13 06:17:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134700074 2011-Dec-13 06:17:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-13 06:17:10 LOG5 begin_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2011-Dec-13 06:17:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 06:17:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-13 06:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.178 (still bad) 2011-Dec-13 06:17:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:17:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:17:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:17:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-13 06:17:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37031.00 2011-Dec-13 06:17:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 06:17:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:17:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:17:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 06:17:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 06:17:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 06:17:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 06:17:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 06:17:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 06:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.178 (still bad) 2011-Dec-13 06:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.155 (still bad) 2011-Dec-13 06:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.154 (still bad) 2011-Dec-13 06:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.157 (still bad) 2011-Dec-13 06:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.156 (still bad) 2011-Dec-13 06:17:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 06:17:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-13 06:17:21 LOG5 end_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2011-Dec-13 06:17:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-13 06:17:21 LOG5 end_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2011-Dec-13 06:17:21 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2011-Dec-13 06:17:21 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-13 06:17:21 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2011-Dec-13 06:17:21 LOG5 antvel: Calling 'antvel 101332.400000 203510.900000 J Topocentric 0' 2011-Dec-13 06:17:21 LOG2 antvel: Precessing RA = 10:13:32.4 Dec = +20:35:10.9 Epoch = 2011.95075 J 2011-Dec-13 06:17:21 LOG2 antvel: Computed apparent RA = 10:14:13.3 Dec = +20:31:23.6 2011-Dec-13 06:17:21 LOG2 antvel: Parameters to Doppler: Topocentric 37041 2011 347 0.0 2011-Dec-13 06:17:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-13 06:17:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2011-Dec-13 06:17:21 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2011-Dec-13 06:17:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-13 06:17:21 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-13 06:17:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-13 06:17:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:17:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2011-Dec-13 06:17:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-13 06:17:21 LOG5 begin_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2011-Dec-13 06:17:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-13 06:17:21 LOG5 log_alfabeam: Parameters: 10.225666666666665 20.58636111111111 11.289235 2011.9507516731312 18.999933 2011-Dec-13 06:17:21 LOG4 log_alfabeam: ALFABEAM 0 10.225666666666667 20.586361111111110 2011-Dec-13 06:17:21 LOG4 log_alfabeam: ALFABEAM 1 10.233209006440283 20.593388773194558 2011-Dec-13 06:17:21 LOG4 log_alfabeam: ALFABEAM 2 10.228743618051432 20.668778954172645 2011-Dec-13 06:17:21 LOG4 log_alfabeam: ALFABEAM 3 10.221194980909182 20.662103420275379 2011-Dec-13 06:17:21 LOG4 log_alfabeam: ALFABEAM 4 10.218124795869278 20.579021883861870 2011-Dec-13 06:17:21 LOG4 log_alfabeam: ALFABEAM 5 10.222624718811671 20.503495973687958 2011-Dec-13 06:17:21 LOG4 log_alfabeam: ALFABEAM 6 10.230160165961777 20.511186955695017 2011-Dec-13 06:17:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134700075 2011-Dec-13 06:17:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-13 06:17:22 LOG5 begin_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2011-Dec-13 06:17:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 06:17:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-13 06:17:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:17:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:17:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.155 (still bad) 2011-Dec-13 06:17:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-13 06:17:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37043.00 2011-Dec-13 06:17:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 06:17:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:17:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:17:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 06:17:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 06:17:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 06:17:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 06:17:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 06:17:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 06:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.155 (still bad) 2011-Dec-13 06:17:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-13 06:17:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 0.911 0.979 1.038 2011-Dec-13 06:17:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.940 1.090 1.117 0.954 2011-Dec-13 06:17:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.880 0.968 0.986 1.152 2011-Dec-13 06:17:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.938 0.026 1.022 0.026 2011-Dec-13 06:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.150 (still bad) 2011-Dec-13 06:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.153 (still bad) 2011-Dec-13 06:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.150 (still bad) 2011-Dec-13 06:17:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 06:17:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-13 06:17:33 LOG5 end_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2011-Dec-13 06:17:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-13 06:17:33 LOG5 end_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2011-Dec-13 06:17:33 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2011-Dec-13 06:17:33 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-13 06:17:33 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2011-Dec-13 06:17:33 LOG5 antvel: Calling 'antvel 101332.400000 203510.900000 J Topocentric 0' 2011-Dec-13 06:17:33 LOG2 antvel: Precessing RA = 10:13:32.4 Dec = +20:35:10.9 Epoch = 2011.95075 J 2011-Dec-13 06:17:33 LOG2 antvel: Computed apparent RA = 10:14:13.3 Dec = +20:31:23.6 2011-Dec-13 06:17:33 LOG2 antvel: Parameters to Doppler: Topocentric 37053 2011 347 0.0 2011-Dec-13 06:17:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-13 06:17:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2011-Dec-13 06:17:33 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2011-Dec-13 06:17:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-13 06:17:33 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-13 06:17:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-13 06:17:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:17:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2011-Dec-13 06:17:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-13 06:17:33 LOG5 begin_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2011-Dec-13 06:17:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-13 06:17:33 LOG5 log_alfabeam: Parameters: 10.225666666666665 20.58636111111111 11.292577 2011.9507520533882 18.999933 2011-Dec-13 06:17:33 LOG4 log_alfabeam: ALFABEAM 0 10.225666666666671 20.586361111111117 2011-Dec-13 06:17:33 LOG4 log_alfabeam: ALFABEAM 1 10.233208705075592 20.593453064459680 2011-Dec-13 06:17:33 LOG4 log_alfabeam: ALFABEAM 2 10.228740023117826 20.668805718528876 2011-Dec-13 06:17:33 LOG4 log_alfabeam: ALFABEAM 3 10.221191683128341 20.662064555362448 2011-Dec-13 06:17:33 LOG4 log_alfabeam: ALFABEAM 4 10.218125114501941 20.578958368868769 2011-Dec-13 06:17:33 LOG4 log_alfabeam: ALFABEAM 5 10.222628226767958 20.503470916934241 2011-Dec-13 06:17:33 LOG4 log_alfabeam: ALFABEAM 6 10.230163352164466 20.511224077176628 2011-Dec-13 06:17:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134700076 2011-Dec-13 06:17:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-13 06:17:34 LOG5 begin_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2011-Dec-13 06:17:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 06:17:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-13 06:17:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:17:34 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:17:34 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:17:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-13 06:17:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37055.00 2011-Dec-13 06:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.152 (still bad) 2011-Dec-13 06:17:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 06:17:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:17:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:17:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 06:17:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 06:17:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 06:17:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 06:17:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 06:17:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 06:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.148 (still bad) 2011-Dec-13 06:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.147 (still bad) 2011-Dec-13 06:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.147 (still bad) 2011-Dec-13 06:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.145 (still bad) 2011-Dec-13 06:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.144 (still bad) 2011-Dec-13 06:17:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 06:17:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-13 06:17:45 LOG5 end_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2011-Dec-13 06:17:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-13 06:17:45 LOG5 end_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2011-Dec-13 06:17:45 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2011-Dec-13 06:17:45 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-13 06:17:45 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-13 06:17:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-13 06:17:45 LOG5 begin_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2011-Dec-13 06:17:45 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-13 06:17:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-13 06:17:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-13 06:17:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-13 06:17:45 LOG5 end_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2011-Dec-13 06:17:45 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2011-Dec-13 06:17:45 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2011-Dec-13 06:17:45 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2011-Dec-13 06:17:45 LOG5 antvel: Calling 'antvel 101332.400000 203510.900000 J Topocentric 0' 2011-Dec-13 06:17:45 LOG2 antvel: Precessing RA = 10:13:32.4 Dec = +20:35:10.9 Epoch = 2011.95075 J 2011-Dec-13 06:17:45 LOG2 antvel: Computed apparent RA = 10:14:13.3 Dec = +20:31:23.6 2011-Dec-13 06:17:45 LOG2 antvel: Parameters to Doppler: Topocentric 37065 2011 347 0.0 2011-Dec-13 06:17:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-13 06:17:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2011-Dec-13 06:17:45 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2011-Dec-13 06:17:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-13 06:17:45 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-13 06:17:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-13 06:17:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:17:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2011-Dec-13 06:17:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-13 06:17:45 LOG5 begin_task: Level: (3) ID = <10311> Status = 0 0 0 0 ok 2011-Dec-13 06:17:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2011-Dec-13 06:17:45 LOG5 log_alfabeam: Parameters: 10.225666666666665 20.58636111111111 11.295920 2011.9507524336452 18.999933 2011-Dec-13 06:17:45 LOG4 log_alfabeam: ALFABEAM 0 10.225666666666667 20.586361111111110 2011-Dec-13 06:17:45 LOG4 log_alfabeam: ALFABEAM 1 10.233208402247094 20.593517075646030 2011-Dec-13 06:17:45 LOG4 log_alfabeam: ALFABEAM 2 10.228736442568410 20.668832335892120 2011-Dec-13 06:17:45 LOG4 log_alfabeam: ALFABEAM 3 10.221188401319379 20.662025831098816 2011-Dec-13 06:17:45 LOG4 log_alfabeam: ALFABEAM 4 10.218125434456141 20.578895129704442 2011-Dec-13 06:17:45 LOG4 log_alfabeam: ALFABEAM 5 10.222631720718940 20.503445996287944 2011-Dec-13 06:17:45 LOG4 log_alfabeam: ALFABEAM 6 10.230166523153930 20.511261066505316 2011-Dec-13 06:17:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134700077 2011-Dec-13 06:17:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-13 06:17:46 LOG5 begin_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2011-Dec-13 06:17:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 06:17:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-13 06:17:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:17:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:17:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:17:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2011-Dec-13 06:17:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37067.00 2011-Dec-13 06:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.144 (still bad) 2011-Dec-13 06:17:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 06:17:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:17:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:17:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 06:17:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 06:17:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 06:17:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 06:17:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 06:17:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 06:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.583 (still bad) 2011-Dec-13 06:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.578 (still bad) 2011-Dec-13 06:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.582 (still bad) 2011-Dec-13 06:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.578 (still bad) 2011-Dec-13 06:17:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 06:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.578 (still bad) 2011-Dec-13 06:17:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-13 06:17:57 LOG5 end_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2011-Dec-13 06:17:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-13 06:17:57 LOG5 end_task: Level: (3) ID = <10311> Status = 0 0 0 0 ok 2011-Dec-13 06:17:57 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2011-Dec-13 06:17:57 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2011-Dec-13 06:17:57 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2011-Dec-13 06:17:57 LOG5 antvel: Calling 'antvel 101332.400000 203510.900000 J Topocentric 0' 2011-Dec-13 06:17:57 LOG2 antvel: Precessing RA = 10:13:32.4 Dec = +20:35:10.9 Epoch = 2011.95075 J 2011-Dec-13 06:17:57 LOG2 antvel: Computed apparent RA = 10:14:13.3 Dec = +20:31:23.6 2011-Dec-13 06:17:57 LOG2 antvel: Parameters to Doppler: Topocentric 37077 2011 347 0.0 2011-Dec-13 06:17:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-13 06:17:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2011-Dec-13 06:17:57 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2011-Dec-13 06:17:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-13 06:17:57 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-13 06:17:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-13 06:17:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:17:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2011-Dec-13 06:17:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-13 06:17:57 LOG5 begin_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2011-Dec-13 06:17:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2011-Dec-13 06:17:57 LOG5 log_alfabeam: Parameters: 10.225666666666665 20.58636111111111 11.299262 2011.9507528139022 18.999933 2011-Dec-13 06:17:57 LOG4 log_alfabeam: ALFABEAM 0 10.225666666666667 20.586361111111096 2011-Dec-13 06:17:57 LOG4 log_alfabeam: ALFABEAM 1 10.233208098161230 20.593580771213308 2011-Dec-13 06:17:57 LOG4 log_alfabeam: ALFABEAM 2 10.228732878409152 20.668858791900224 2011-Dec-13 06:17:57 LOG4 log_alfabeam: ALFABEAM 3 10.221185137282312 20.661987269387417 2011-Dec-13 06:17:57 LOG4 log_alfabeam: ALFABEAM 4 10.218125755516967 20.578832201486311 2011-Dec-13 06:17:57 LOG4 log_alfabeam: ALFABEAM 5 10.222635198707804 20.503421225208903 2011-Dec-13 06:17:57 LOG4 log_alfabeam: ALFABEAM 6 10.230169677188270 20.511297902747383 2011-Dec-13 06:17:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134700078 2011-Dec-13 06:17:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-13 06:17:58 LOG5 begin_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2011-Dec-13 06:17:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 06:17:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-13 06:17:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:17:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:17:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:17:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2011-Dec-13 06:17:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37079.00 2011-Dec-13 06:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.578 (still bad) 2011-Dec-13 06:18:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 06:18:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:18:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:18:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 06:18:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 06:18:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 06:18:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 06:18:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 06:18:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 06:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.638 (still bad) 2011-Dec-13 06:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.633 (still bad) 2011-Dec-13 06:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.636 (still bad) 2011-Dec-13 06:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.630 (still bad) 2011-Dec-13 06:18:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 06:18:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-13 06:18:09 LOG5 end_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2011-Dec-13 06:18:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-13 06:18:09 LOG5 end_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2011-Dec-13 06:18:09 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2011-Dec-13 06:18:09 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2011-Dec-13 06:18:09 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2011-Dec-13 06:18:09 LOG5 antvel: Calling 'antvel 101332.400000 203510.900000 J Topocentric 0' 2011-Dec-13 06:18:09 LOG2 antvel: Precessing RA = 10:13:32.4 Dec = +20:35:10.9 Epoch = 2011.95075 J 2011-Dec-13 06:18:09 LOG2 antvel: Computed apparent RA = 10:14:13.3 Dec = +20:31:23.6 2011-Dec-13 06:18:09 LOG2 antvel: Parameters to Doppler: Topocentric 37089 2011 347 0.0 2011-Dec-13 06:18:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-13 06:18:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2011-Dec-13 06:18:09 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2011-Dec-13 06:18:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-13 06:18:09 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-13 06:18:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-13 06:18:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:18:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2011-Dec-13 06:18:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-13 06:18:09 LOG5 begin_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2011-Dec-13 06:18:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2011-Dec-13 06:18:09 LOG5 log_alfabeam: Parameters: 10.225666666666665 20.58636111111111 11.302605 2011.9507531941595 18.999933 2011-Dec-13 06:18:09 LOG4 log_alfabeam: ALFABEAM 0 10.225666666666667 20.586361111111099 2011-Dec-13 06:18:09 LOG4 log_alfabeam: ALFABEAM 1 10.233207792660844 20.593644192003090 2011-Dec-13 06:18:09 LOG4 log_alfabeam: ALFABEAM 2 10.228729328372427 20.668885103927565 2011-Dec-13 06:18:09 LOG4 log_alfabeam: ALFABEAM 3 10.221181888902409 20.661948845899513 2011-Dec-13 06:18:09 LOG4 log_alfabeam: ALFABEAM 4 10.218126077853507 20.578769543870557 2011-Dec-13 06:18:09 LOG4 log_alfabeam: ALFABEAM 5 10.222638662947963 20.503396587442474 2011-Dec-13 06:18:09 LOG4 log_alfabeam: ALFABEAM 6 10.230172816308293 20.511334609130909 2011-Dec-13 06:18:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134700079 2011-Dec-13 06:18:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-13 06:18:10 LOG5 begin_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2011-Dec-13 06:18:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 06:18:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-13 06:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.631 (still bad) 2011-Dec-13 06:18:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:18:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:18:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:18:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2011-Dec-13 06:18:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37091.00 2011-Dec-13 06:18:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 06:18:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:18:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:18:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 06:18:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 06:18:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 06:18:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 06:18:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 06:18:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 06:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.631 (still bad) 2011-Dec-13 06:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.634 (still bad) 2011-Dec-13 06:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.628 (still bad) 2011-Dec-13 06:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.631 (still bad) 2011-Dec-13 06:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.627 (still bad) 2011-Dec-13 06:18:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 06:18:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-13 06:18:21 LOG5 end_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2011-Dec-13 06:18:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-13 06:18:21 LOG5 end_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2011-Dec-13 06:18:21 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2011-Dec-13 06:18:21 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2011-Dec-13 06:18:21 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2011-Dec-13 06:18:21 LOG5 antvel: Calling 'antvel 101332.400000 203510.900000 J Topocentric 0' 2011-Dec-13 06:18:21 LOG2 antvel: Precessing RA = 10:13:32.4 Dec = +20:35:10.9 Epoch = 2011.95075 J 2011-Dec-13 06:18:21 LOG2 antvel: Computed apparent RA = 10:14:13.3 Dec = +20:31:23.6 2011-Dec-13 06:18:21 LOG2 antvel: Parameters to Doppler: Topocentric 37101 2011 347 0.0 2011-Dec-13 06:18:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-13 06:18:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2011-Dec-13 06:18:21 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2011-Dec-13 06:18:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-13 06:18:21 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-13 06:18:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-13 06:18:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:18:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2011-Dec-13 06:18:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-13 06:18:21 LOG5 begin_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2011-Dec-13 06:18:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2011-Dec-13 06:18:21 LOG5 log_alfabeam: Parameters: 10.225666666666665 20.58636111111111 11.305947 2011.9507535744165 18.999933 2011-Dec-13 06:18:21 LOG4 log_alfabeam: ALFABEAM 0 10.225666666666665 20.586361111111113 2011-Dec-13 06:18:21 LOG4 log_alfabeam: ALFABEAM 1 10.233207485952997 20.593707302762571 2011-Dec-13 06:18:21 LOG4 log_alfabeam: ALFABEAM 2 10.228725794449018 20.668911257753546 2011-Dec-13 06:18:21 LOG4 log_alfabeam: ALFABEAM 3 10.221178657963787 20.661910582384355 2011-Dec-13 06:18:21 LOG4 log_alfabeam: ALFABEAM 4 10.218126401250325 20.578707191691585 2011-Dec-13 06:18:21 LOG4 log_alfabeam: ALFABEAM 5 10.222642111497350 20.503372096317509 2011-Dec-13 06:18:21 LOG4 log_alfabeam: ALFABEAM 6 10.230175938787285 20.511371164866524 2011-Dec-13 06:18:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134700080 2011-Dec-13 06:18:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-13 06:18:22 LOG5 begin_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2011-Dec-13 06:18:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-13 06:18:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 06:18:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:18:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:18:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.627 (still bad) 2011-Dec-13 06:18:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2011-Dec-13 06:18:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37103.00 2011-Dec-13 06:18:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 06:18:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:18:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:18:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 06:18:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 06:18:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 06:18:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 06:18:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 06:18:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 06:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.627 (still bad) 2011-Dec-13 06:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.606 (still bad) 2011-Dec-13 06:18:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-13 06:18:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.343 1.264 1.329 1.404 2011-Dec-13 06:18:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.321 1.524 1.604 1.329 2011-Dec-13 06:18:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.128 1.376 1.422 1.586 2011-Dec-13 06:18:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.344 0.026 1.465 0.026 2011-Dec-13 06:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.609 (still bad) 2011-Dec-13 06:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.607 (still bad) 2011-Dec-13 06:18:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 06:18:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-13 06:18:33 LOG5 end_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2011-Dec-13 06:18:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-13 06:18:33 LOG5 end_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2011-Dec-13 06:18:33 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2011-Dec-13 06:18:33 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2011-Dec-13 06:18:33 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2011-Dec-13 06:18:33 LOG5 antvel: Calling 'antvel 101332.400000 203510.900000 J Topocentric 0' 2011-Dec-13 06:18:33 LOG2 antvel: Precessing RA = 10:13:32.4 Dec = +20:35:10.9 Epoch = 2011.95075 J 2011-Dec-13 06:18:33 LOG2 antvel: Computed apparent RA = 10:14:13.3 Dec = +20:31:23.6 2011-Dec-13 06:18:33 LOG2 antvel: Parameters to Doppler: Topocentric 37113 2011 347 0.0 2011-Dec-13 06:18:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-13 06:18:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2011-Dec-13 06:18:33 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2011-Dec-13 06:18:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-13 06:18:33 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-13 06:18:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-13 06:18:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:18:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2011-Dec-13 06:18:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-13 06:18:33 LOG5 begin_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2011-Dec-13 06:18:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2011-Dec-13 06:18:33 LOG5 log_alfabeam: Parameters: 10.225666666666665 20.58636111111111 11.309290 2011.9507539546735 18.999933 2011-Dec-13 06:18:33 LOG4 log_alfabeam: ALFABEAM 0 10.225666666666665 20.586361111111099 2011-Dec-13 06:18:33 LOG4 log_alfabeam: ALFABEAM 1 10.233207177878034 20.593770143918547 2011-Dec-13 06:18:33 LOG4 log_alfabeam: ALFABEAM 2 10.228722274392432 20.668937270531185 2011-Dec-13 06:18:33 LOG4 log_alfabeam: ALFABEAM 3 10.221175442375586 20.661872454717585 2011-Dec-13 06:18:33 LOG4 log_alfabeam: ALFABEAM 4 10.218126725878820 20.578645105014175 2011-Dec-13 06:18:33 LOG4 log_alfabeam: ALFABEAM 5 10.222645546548776 20.503347735784480 2011-Dec-13 06:18:33 LOG4 log_alfabeam: ALFABEAM 6 10.230179046643356 20.511407592989759 2011-Dec-13 06:18:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134700081 2011-Dec-13 06:18:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-13 06:18:34 LOG5 begin_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2011-Dec-13 06:18:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 06:18:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-13 06:18:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:18:34 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:18:34 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:18:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2011-Dec-13 06:18:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37115.00 2011-Dec-13 06:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.608 (still bad) 2011-Dec-13 06:18:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 06:18:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:18:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:18:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 06:18:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 06:18:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 06:18:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 06:18:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 06:18:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 06:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.572 (still bad) 2011-Dec-13 06:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.556 (still bad) 2011-Dec-13 06:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.556 (still bad) 2011-Dec-13 06:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.561 (still bad) 2011-Dec-13 06:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.556 (still bad) 2011-Dec-13 06:18:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 06:18:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-13 06:18:45 LOG5 end_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2011-Dec-13 06:18:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-13 06:18:45 LOG5 end_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2011-Dec-13 06:18:45 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2011-Dec-13 06:18:45 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2011-Dec-13 06:18:45 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2011-Dec-13 06:18:45 LOG5 antvel: Calling 'antvel 101332.400000 203510.900000 J Topocentric 0' 2011-Dec-13 06:18:45 LOG2 antvel: Precessing RA = 10:13:32.4 Dec = +20:35:10.9 Epoch = 2011.95075 J 2011-Dec-13 06:18:45 LOG2 antvel: Computed apparent RA = 10:14:13.3 Dec = +20:31:23.6 2011-Dec-13 06:18:45 LOG2 antvel: Parameters to Doppler: Topocentric 37125 2011 347 0.0 2011-Dec-13 06:18:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-13 06:18:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2011-Dec-13 06:18:45 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2011-Dec-13 06:18:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-13 06:18:45 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-13 06:18:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-13 06:18:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:18:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2011-Dec-13 06:18:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-13 06:18:45 LOG5 begin_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2011-Dec-13 06:18:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2011-Dec-13 06:18:45 LOG5 log_alfabeam: Parameters: 10.225666666666665 20.58636111111111 11.312632 2011.9507543349305 18.999933 2011-Dec-13 06:18:45 LOG4 log_alfabeam: ALFABEAM 0 10.225666666666667 20.586361111111099 2011-Dec-13 06:18:45 LOG4 log_alfabeam: ALFABEAM 1 10.233206868643643 20.593832680501190 2011-Dec-13 06:18:45 LOG4 log_alfabeam: ALFABEAM 2 10.228718770178508 20.668963128179165 2011-Dec-13 06:18:45 LOG4 log_alfabeam: ALFABEAM 3 10.221172243906276 20.661834484497057 2011-Dec-13 06:18:45 LOG4 log_alfabeam: ALFABEAM 4 10.218127051523050 20.578583318394106 2011-Dec-13 06:18:45 LOG4 log_alfabeam: ALFABEAM 5 10.222648966174670 20.503323519043391 2011-Dec-13 06:18:45 LOG4 log_alfabeam: ALFABEAM 6 10.230182138164720 20.511443872853381 2011-Dec-13 06:18:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134700082 2011-Dec-13 06:18:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-13 06:18:46 LOG5 begin_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2011-Dec-13 06:18:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 06:18:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-13 06:18:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:18:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:18:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:18:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2011-Dec-13 06:18:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37127.00 2011-Dec-13 06:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.559 (still bad) 2011-Dec-13 06:18:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 06:18:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:18:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:18:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 06:18:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 06:18:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 06:18:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 06:18:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 06:18:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 06:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.562 (still bad) 2011-Dec-13 06:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.551 (still bad) 2011-Dec-13 06:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.549 (still bad) 2011-Dec-13 06:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.554 (still bad) 2011-Dec-13 06:18:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 06:18:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-13 06:18:57 LOG5 end_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2011-Dec-13 06:18:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-13 06:18:57 LOG5 end_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2011-Dec-13 06:18:57 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2011-Dec-13 06:18:57 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2011-Dec-13 06:18:57 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2011-Dec-13 06:18:57 LOG5 antvel: Calling 'antvel 101332.400000 203510.900000 J Topocentric 0' 2011-Dec-13 06:18:57 LOG2 antvel: Precessing RA = 10:13:32.4 Dec = +20:35:10.9 Epoch = 2011.95075 J 2011-Dec-13 06:18:57 LOG2 antvel: Computed apparent RA = 10:14:13.3 Dec = +20:31:23.6 2011-Dec-13 06:18:57 LOG2 antvel: Parameters to Doppler: Topocentric 37137 2011 347 0.0 2011-Dec-13 06:18:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-13 06:18:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2011-Dec-13 06:18:57 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2011-Dec-13 06:18:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-13 06:18:57 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-13 06:18:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-13 06:18:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:18:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2011-Dec-13 06:18:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-13 06:18:57 LOG5 begin_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2011-Dec-13 06:18:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2011-Dec-13 06:18:57 LOG5 log_alfabeam: Parameters: 10.225666666666665 20.58636111111111 11.315975 2011.9507547151875 18.999933 2011-Dec-13 06:18:57 LOG4 log_alfabeam: ALFABEAM 0 10.225666666666667 20.586361111111099 2011-Dec-13 06:18:57 LOG4 log_alfabeam: ALFABEAM 1 10.233206558087714 20.593894952530793 2011-Dec-13 06:18:57 LOG4 log_alfabeam: ALFABEAM 2 10.228715279581470 20.668988847634083 2011-Dec-13 06:18:57 LOG4 log_alfabeam: ALFABEAM 3 10.221169060488334 20.661796647799235 2011-Dec-13 06:18:57 LOG4 log_alfabeam: ALFABEAM 4 10.218127378356600 20.578521792296730 2011-Dec-13 06:18:57 LOG4 log_alfabeam: ALFABEAM 5 10.222652372547618 20.503299430245338 2011-Dec-13 06:18:57 LOG4 log_alfabeam: ALFABEAM 6 10.230185215347237 20.511480027303786 2011-Dec-13 06:18:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134700083 2011-Dec-13 06:18:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-13 06:18:58 LOG5 begin_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2011-Dec-13 06:18:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 06:18:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-13 06:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.552 (still bad) 2011-Dec-13 06:18:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:18:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:18:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:18:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2011-Dec-13 06:18:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37139.00 2011-Dec-13 06:19:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 06:19:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:19:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:19:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 06:19:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 06:19:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 06:19:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 06:19:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 06:19:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 06:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.552 (still bad) 2011-Dec-13 06:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.546 (still bad) 2011-Dec-13 06:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.546 (still bad) 2011-Dec-13 06:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.547 (still bad) 2011-Dec-13 06:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.545 (still bad) 2011-Dec-13 06:19:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 06:19:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-13 06:19:09 LOG5 end_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2011-Dec-13 06:19:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-13 06:19:09 LOG5 end_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2011-Dec-13 06:19:09 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2011-Dec-13 06:19:09 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2011-Dec-13 06:19:09 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2011-Dec-13 06:19:09 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-13 06:19:09 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-13 06:19:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-13 06:19:09 LOG5 begin_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2011-Dec-13 06:19:09 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-13 06:19:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-13 06:19:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-13 06:19:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-13 06:19:09 LOG5 end_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2011-Dec-13 06:19:09 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2011-Dec-13 06:19:09 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2011-Dec-13 06:19:09 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-13 06:19:09 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2011-Dec-13 06:19:09 LOG5 antvel: Calling 'antvel 101332.400000 203510.900000 J Topocentric 0' 2011-Dec-13 06:19:09 LOG2 antvel: Precessing RA = 10:13:32.4 Dec = +20:35:10.9 Epoch = 2011.95076 J 2011-Dec-13 06:19:09 LOG2 antvel: Computed apparent RA = 10:14:13.3 Dec = +20:31:23.6 2011-Dec-13 06:19:09 LOG2 antvel: Parameters to Doppler: Topocentric 37149 2011 347 0.0 2011-Dec-13 06:19:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-13 06:19:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2011-Dec-13 06:19:09 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2011-Dec-13 06:19:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-13 06:19:09 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-13 06:19:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-13 06:19:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:19:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2011-Dec-13 06:19:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-13 06:19:09 LOG5 begin_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2011-Dec-13 06:19:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-13 06:19:09 LOG5 log_alfabeam: Parameters: 10.225666666666665 20.58636111111111 11.319317 2011.9507550954447 18.999933 2011-Dec-13 06:19:09 LOG4 log_alfabeam: ALFABEAM 0 10.225666666666664 20.586361111111099 2011-Dec-13 06:19:09 LOG4 log_alfabeam: ALFABEAM 1 10.233206246418547 20.593956925316117 2011-Dec-13 06:19:09 LOG4 log_alfabeam: ALFABEAM 2 10.228711804562437 20.669014414951544 2011-Dec-13 06:19:09 LOG4 log_alfabeam: ALFABEAM 3 10.221165893874838 20.661758966072874 2011-Dec-13 06:19:09 LOG4 log_alfabeam: ALFABEAM 4 10.218127706163061 20.578460561003489 2011-Dec-13 06:19:09 LOG4 log_alfabeam: ALFABEAM 5 10.222655763754341 20.503275482463611 2011-Dec-13 06:19:09 LOG4 log_alfabeam: ALFABEAM 6 10.230188276493827 20.511516035833722 2011-Dec-13 06:19:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134700084 2011-Dec-13 06:19:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-13 06:19:10 LOG5 begin_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2011-Dec-13 06:19:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 06:19:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-13 06:19:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:19:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:19:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.544 (still bad) 2011-Dec-13 06:19:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-13 06:19:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37151.00 2011-Dec-13 06:19:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 06:19:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:19:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:19:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 06:19:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 06:19:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 06:19:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 06:19:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 06:19:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 06:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.187 (still bad) 2011-Dec-13 06:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.173 (still bad) 2011-Dec-13 06:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.173 (still bad) 2011-Dec-13 06:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.179 (still bad) 2011-Dec-13 06:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.173 (still bad) 2011-Dec-13 06:19:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 06:19:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-13 06:19:21 LOG5 end_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2011-Dec-13 06:19:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-13 06:19:21 LOG5 end_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2011-Dec-13 06:19:21 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2011-Dec-13 06:19:21 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-13 06:19:21 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2011-Dec-13 06:19:21 LOG5 antvel: Calling 'antvel 101332.400000 203510.900000 J Topocentric 0' 2011-Dec-13 06:19:21 LOG2 antvel: Precessing RA = 10:13:32.4 Dec = +20:35:10.9 Epoch = 2011.95076 J 2011-Dec-13 06:19:21 LOG2 antvel: Computed apparent RA = 10:14:13.3 Dec = +20:31:23.6 2011-Dec-13 06:19:21 LOG2 antvel: Parameters to Doppler: Topocentric 37161 2011 347 0.0 2011-Dec-13 06:19:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-13 06:19:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2011-Dec-13 06:19:21 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2011-Dec-13 06:19:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-13 06:19:21 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-13 06:19:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-13 06:19:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:19:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2011-Dec-13 06:19:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-13 06:19:21 LOG5 begin_task: Level: (3) ID = <10328> Status = 0 0 0 0 ok 2011-Dec-13 06:19:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-13 06:19:21 LOG5 log_alfabeam: Parameters: 10.225666666666665 20.58636111111111 11.322660 2011.9507554757017 18.999933 2011-Dec-13 06:19:21 LOG4 log_alfabeam: ALFABEAM 0 10.225666666666667 20.586361111111110 2011-Dec-13 06:19:21 LOG4 log_alfabeam: ALFABEAM 1 10.233205933471718 20.594018638478968 2011-Dec-13 06:19:21 LOG4 log_alfabeam: ALFABEAM 2 10.228708342915988 20.669039846856560 2011-Dec-13 06:19:21 LOG4 log_alfabeam: ALFABEAM 3 10.221162742021141 20.661721415591707 2011-Dec-13 06:19:21 LOG4 log_alfabeam: ALFABEAM 4 10.218128035118141 20.578399585372370 2011-Dec-13 06:19:21 LOG4 log_alfabeam: ALFABEAM 5 10.222659141947586 20.503251660045500 2011-Dec-13 06:19:21 LOG4 log_alfabeam: ALFABEAM 6 10.230191323578596 20.511551921103745 2011-Dec-13 06:19:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134700085 2011-Dec-13 06:19:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-13 06:19:22 LOG5 begin_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2011-Dec-13 06:19:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 06:19:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-13 06:19:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:19:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:19:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:19:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-13 06:19:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37163.00 2011-Dec-13 06:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.172 (still bad) 2011-Dec-13 06:19:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 06:19:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:19:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:19:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 06:19:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 06:19:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 06:19:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 06:19:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 06:19:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 06:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.207 (still bad) 2011-Dec-13 06:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.203 (still bad) 2011-Dec-13 06:19:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-13 06:19:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.989 0.960 1.005 1.079 2011-Dec-13 06:19:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.973 1.127 1.202 1.002 2011-Dec-13 06:19:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.931 1.015 1.060 1.208 2011-Dec-13 06:19:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.974 0.026 1.062 0.027 2011-Dec-13 06:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.203 (still bad) 2011-Dec-13 06:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.204 (still bad) 2011-Dec-13 06:19:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 06:19:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-13 06:19:33 LOG5 end_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2011-Dec-13 06:19:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-13 06:19:33 LOG5 end_task: Level: (3) ID = <10328> Status = 0 0 0 0 ok 2011-Dec-13 06:19:33 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2011-Dec-13 06:19:33 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-13 06:19:33 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2011-Dec-13 06:19:33 LOG5 antvel: Calling 'antvel 101332.400000 203510.900000 J Topocentric 0' 2011-Dec-13 06:19:33 LOG2 antvel: Precessing RA = 10:13:32.4 Dec = +20:35:10.9 Epoch = 2011.95076 J 2011-Dec-13 06:19:33 LOG2 antvel: Computed apparent RA = 10:14:13.3 Dec = +20:31:23.6 2011-Dec-13 06:19:33 LOG2 antvel: Parameters to Doppler: Topocentric 37173 2011 347 0.0 2011-Dec-13 06:19:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-13 06:19:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2011-Dec-13 06:19:33 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2011-Dec-13 06:19:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-13 06:19:33 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-13 06:19:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-13 06:19:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:19:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2011-Dec-13 06:19:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-13 06:19:33 LOG5 begin_task: Level: (3) ID = <10330> Status = 0 0 0 0 ok 2011-Dec-13 06:19:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-13 06:19:33 LOG5 log_alfabeam: Parameters: 10.225666666666665 20.58636111111111 11.326002 2011.9507558559587 18.999933 2011-Dec-13 06:19:33 LOG4 log_alfabeam: ALFABEAM 0 10.225666666666667 20.586361111111092 2011-Dec-13 06:19:33 LOG4 log_alfabeam: ALFABEAM 1 10.233205619456086 20.594080057602309 2011-Dec-13 06:19:33 LOG4 log_alfabeam: ALFABEAM 2 10.228704896588729 20.669065129539376 2011-Dec-13 06:19:33 LOG4 log_alfabeam: ALFABEAM 3 10.221159606665166 20.661684017657620 2011-Dec-13 06:19:33 LOG4 log_alfabeam: ALFABEAM 4 10.218128365004954 20.578338899414785 2011-Dec-13 06:19:33 LOG4 log_alfabeam: ALFABEAM 5 10.222662505228152 20.503227975939613 2011-Dec-13 06:19:33 LOG4 log_alfabeam: ALFABEAM 6 10.230194354918906 20.511587662744535 2011-Dec-13 06:19:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134700086 2011-Dec-13 06:19:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-13 06:19:34 LOG5 begin_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2011-Dec-13 06:19:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 06:19:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-13 06:19:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:19:34 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:19:34 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:19:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-13 06:19:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37175.00 2011-Dec-13 06:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.204 (still bad) 2011-Dec-13 06:19:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 06:19:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:19:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:19:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 06:19:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 06:19:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 06:19:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 06:19:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 06:19:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 06:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.205 (still bad) 2011-Dec-13 06:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.202 (still bad) 2011-Dec-13 06:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.204 (still bad) 2011-Dec-13 06:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.202 (still bad) 2011-Dec-13 06:19:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 06:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.202 (still bad) 2011-Dec-13 06:19:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-13 06:19:45 LOG5 end_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2011-Dec-13 06:19:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-13 06:19:45 LOG5 end_task: Level: (3) ID = <10330> Status = 0 0 0 0 ok 2011-Dec-13 06:19:45 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2011-Dec-13 06:19:45 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-13 06:19:45 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2011-Dec-13 06:19:45 LOG5 antvel: Calling 'antvel 101332.400000 203510.900000 J Topocentric 0' 2011-Dec-13 06:19:45 LOG2 antvel: Precessing RA = 10:13:32.4 Dec = +20:35:10.9 Epoch = 2011.95076 J 2011-Dec-13 06:19:45 LOG2 antvel: Computed apparent RA = 10:14:13.3 Dec = +20:31:23.6 2011-Dec-13 06:19:45 LOG2 antvel: Parameters to Doppler: Topocentric 37185 2011 347 0.0 2011-Dec-13 06:19:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-13 06:19:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2011-Dec-13 06:19:45 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2011-Dec-13 06:19:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-13 06:19:45 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-13 06:19:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-13 06:19:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:19:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2011-Dec-13 06:19:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-13 06:19:45 LOG5 begin_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2011-Dec-13 06:19:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-13 06:19:45 LOG5 log_alfabeam: Parameters: 10.225666666666665 20.58636111111111 11.329345 2011.9507562362157 18.999933 2011-Dec-13 06:19:45 LOG4 log_alfabeam: ALFABEAM 0 10.225666666666665 20.586361111111099 2011-Dec-13 06:19:45 LOG4 log_alfabeam: ALFABEAM 1 10.233205304205001 20.594141221917383 2011-Dec-13 06:19:45 LOG4 log_alfabeam: ALFABEAM 2 10.228701463395209 20.669090279518009 2011-Dec-13 06:19:45 LOG4 log_alfabeam: ALFABEAM 3 10.221156485784647 20.661646748738260 2011-Dec-13 06:19:45 LOG4 log_alfabeam: ALFABEAM 4 10.218128696001243 20.578278464373547 2011-Dec-13 06:19:45 LOG4 log_alfabeam: ALFABEAM 5 10.222665855729307 20.503204414685143 2011-Dec-13 06:19:45 LOG4 log_alfabeam: ALFABEAM 6 10.230197372467538 20.511623283234080 2011-Dec-13 06:19:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134700087 2011-Dec-13 06:19:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-13 06:19:46 LOG5 begin_task: Level: (4) ID = <10333> Status = 0 0 0 0 ok 2011-Dec-13 06:19:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 06:19:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-13 06:19:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:19:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:19:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:19:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-13 06:19:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37187.00 2011-Dec-13 06:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.202 (still bad) 2011-Dec-13 06:19:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 06:19:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:19:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:19:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 06:19:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 06:19:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 06:19:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 06:19:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 06:19:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 06:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.196 (still bad) 2011-Dec-13 06:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.191 (still bad) 2011-Dec-13 06:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.195 (still bad) 2011-Dec-13 06:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.192 (still bad) 2011-Dec-13 06:19:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 06:19:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-13 06:19:57 LOG5 end_task: Level: (4) ID = <10333> Status = 0 0 0 0 ok 2011-Dec-13 06:19:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-13 06:19:57 LOG5 end_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2011-Dec-13 06:19:57 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2011-Dec-13 06:19:57 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-13 06:19:57 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2011-Dec-13 06:19:57 LOG5 antvel: Calling 'antvel 101332.400000 203510.900000 J Topocentric 0' 2011-Dec-13 06:19:57 LOG2 antvel: Precessing RA = 10:13:32.4 Dec = +20:35:10.9 Epoch = 2011.95076 J 2011-Dec-13 06:19:57 LOG2 antvel: Computed apparent RA = 10:14:13.3 Dec = +20:31:23.6 2011-Dec-13 06:19:57 LOG2 antvel: Parameters to Doppler: Topocentric 37197 2011 347 0.0 2011-Dec-13 06:19:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-13 06:19:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2011-Dec-13 06:19:57 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2011-Dec-13 06:19:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-13 06:19:57 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-13 06:19:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-13 06:19:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:19:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2011-Dec-13 06:19:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-13 06:19:57 LOG5 begin_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2011-Dec-13 06:19:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-13 06:19:57 LOG5 log_alfabeam: Parameters: 10.225666666666665 20.58636111111111 11.332687 2011.9507566164727 18.999933 2011-Dec-13 06:19:57 LOG4 log_alfabeam: ALFABEAM 0 10.225666666666667 20.586361111111110 2011-Dec-13 06:19:57 LOG4 log_alfabeam: ALFABEAM 1 10.233204987927886 20.594202097277066 2011-Dec-13 06:19:57 LOG4 log_alfabeam: ALFABEAM 2 10.228698045267777 20.669115283115307 2011-Dec-13 06:19:57 LOG4 log_alfabeam: ALFABEAM 3 10.221153381102614 20.661609629990764 2011-Dec-13 06:19:57 LOG4 log_alfabeam: ALFABEAM 4 10.218129027889690 20.578218313994345 2011-Dec-13 06:19:57 LOG4 log_alfabeam: ALFABEAM 5 10.222669191565711 20.503180989108046 2011-Dec-13 06:19:57 LOG4 log_alfabeam: ALFABEAM 6 10.230200374556112 20.511658762338861 2011-Dec-13 06:19:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134700088 2011-Dec-13 06:19:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-13 06:19:58 LOG5 begin_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2011-Dec-13 06:19:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 06:19:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-13 06:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.193 (still bad) 2011-Dec-13 06:19:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:19:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:19:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:19:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-13 06:19:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37199.00 2011-Dec-13 06:20:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 06:20:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:20:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:20:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 06:20:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 06:20:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 06:20:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 06:20:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 06:20:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 06:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.193 (still bad) 2011-Dec-13 06:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.172 (still bad) 2011-Dec-13 06:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.170 (still bad) 2011-Dec-13 06:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.172 (still bad) 2011-Dec-13 06:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.170 (still bad) 2011-Dec-13 06:20:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 06:20:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-13 06:20:09 LOG5 end_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2011-Dec-13 06:20:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-13 06:20:09 LOG5 end_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2011-Dec-13 06:20:09 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2011-Dec-13 06:20:09 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-13 06:20:09 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2011-Dec-13 06:20:09 LOG5 antvel: Calling 'antvel 101332.400000 203510.900000 J Topocentric 0' 2011-Dec-13 06:20:09 LOG2 antvel: Precessing RA = 10:13:32.4 Dec = +20:35:10.9 Epoch = 2011.95076 J 2011-Dec-13 06:20:09 LOG2 antvel: Computed apparent RA = 10:14:13.3 Dec = +20:31:23.6 2011-Dec-13 06:20:09 LOG2 antvel: Parameters to Doppler: Topocentric 37209 2011 347 0.0 2011-Dec-13 06:20:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-13 06:20:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2011-Dec-13 06:20:09 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2011-Dec-13 06:20:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-13 06:20:09 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-13 06:20:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-13 06:20:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:20:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2011-Dec-13 06:20:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-13 06:20:09 LOG5 begin_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2011-Dec-13 06:20:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-13 06:20:09 LOG5 log_alfabeam: Parameters: 10.225666666666665 20.58636111111111 11.336029 2011.95075699673 18.999933 2011-Dec-13 06:20:09 LOG4 log_alfabeam: ALFABEAM 0 10.225666666666667 20.586361111111110 2011-Dec-13 06:20:09 LOG4 log_alfabeam: ALFABEAM 1 10.233204670551046 20.594262704434506 2011-Dec-13 06:20:09 LOG4 log_alfabeam: ALFABEAM 2 10.228694641057080 20.669140149226543 2011-Dec-13 06:20:09 LOG4 log_alfabeam: ALFABEAM 3 10.221150291540930 20.661572649118291 2011-Dec-13 06:20:09 LOG4 log_alfabeam: ALFABEAM 4 10.218129360750217 20.578158427777211 2011-Dec-13 06:20:09 LOG4 log_alfabeam: ALFABEAM 5 10.222672513859436 20.503157690887704 2011-Dec-13 06:20:09 LOG4 log_alfabeam: ALFABEAM 6 10.230203362224669 20.511694111799411 2011-Dec-13 06:20:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134700089 2011-Dec-13 06:20:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-13 06:20:10 LOG5 begin_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2011-Dec-13 06:20:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-13 06:20:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 06:20:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:20:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:20:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.170 (still bad) 2011-Dec-13 06:20:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-13 06:20:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37211.00 2011-Dec-13 06:20:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 06:20:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:20:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:20:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 06:20:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 06:20:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 06:20:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 06:20:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 06:20:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 06:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.170 (still bad) 2011-Dec-13 06:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.167 (still bad) 2011-Dec-13 06:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.165 (still bad) 2011-Dec-13 06:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.167 (still bad) 2011-Dec-13 06:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.165 (still bad) 2011-Dec-13 06:20:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 06:20:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-13 06:20:21 LOG5 end_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2011-Dec-13 06:20:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-13 06:20:21 LOG5 end_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2011-Dec-13 06:20:21 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2011-Dec-13 06:20:21 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-13 06:20:21 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2011-Dec-13 06:20:21 LOG5 antvel: Calling 'antvel 101332.400000 203510.900000 J Topocentric 0' 2011-Dec-13 06:20:21 LOG2 antvel: Precessing RA = 10:13:32.4 Dec = +20:35:10.9 Epoch = 2011.95076 J 2011-Dec-13 06:20:21 LOG2 antvel: Computed apparent RA = 10:14:13.3 Dec = +20:31:23.6 2011-Dec-13 06:20:21 LOG2 antvel: Parameters to Doppler: Topocentric 37221 2011 347 0.0 2011-Dec-13 06:20:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-13 06:20:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2011-Dec-13 06:20:21 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2011-Dec-13 06:20:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-13 06:20:21 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-13 06:20:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-13 06:20:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:20:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2011-Dec-13 06:20:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-13 06:20:21 LOG5 begin_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2011-Dec-13 06:20:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-13 06:20:21 LOG5 log_alfabeam: Parameters: 10.225666666666665 20.58636111111111 11.339372 2011.950757376987 18.999933 2011-Dec-13 06:20:21 LOG4 log_alfabeam: ALFABEAM 0 10.225666666666667 20.586361111111099 2011-Dec-13 06:20:21 LOG4 log_alfabeam: ALFABEAM 1 10.233204351999074 20.594323063793631 2011-Dec-13 06:20:21 LOG4 log_alfabeam: ALFABEAM 2 10.228691249631799 20.669164886565110 2011-Dec-13 06:20:21 LOG4 log_alfabeam: ALFABEAM 3 10.221147216041317 20.661535794000518 2011-Dec-13 06:20:21 LOG4 log_alfabeam: ALFABEAM 4 10.218129694664313 20.578098785566240 2011-Dec-13 06:20:21 LOG4 log_alfabeam: ALFABEAM 5 10.222675823715052 20.503134511872151 2011-Dec-13 06:20:21 LOG4 log_alfabeam: ALFABEAM 6 10.230206336494350 20.511729343190165 2011-Dec-13 06:20:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134700090 2011-Dec-13 06:20:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-13 06:20:22 LOG5 begin_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2011-Dec-13 06:20:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-13 06:20:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-13 06:20:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:20:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:20:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-13 06:20:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37223.00 2011-Dec-13 06:20:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-13 06:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.166 (still bad) 2011-Dec-13 06:20:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-13 06:20:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:20:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.769907 MHz 2011-Dec-13 06:20:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 944.603050 MHz 2011-Dec-13 06:20:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 942.645996 MHz 2011-Dec-13 06:20:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1580.000000 MHz 2011-Dec-13 06:20:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1820.000000 MHz 2011-Dec-13 06:20:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1920.000000 MHz 2011-Dec-13 06:20:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2020.000000 MHz 2011-Dec-13 06:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.173 (still bad) 2011-Dec-13 06:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.163 (still bad) 2011-Dec-13 06:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.162 (still bad) 2011-Dec-13 06:20:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-13 06:20:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 0.927 0.988 1.046 2011-Dec-13 06:20:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 1.104 1.134 0.974 2011-Dec-13 06:20:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.892 0.995 0.995 1.165 2011-Dec-13 06:20:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.026 1.030 0.026 2011-Dec-13 06:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.161 (still bad) 2011-Dec-13 06:20:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-13 06:20:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-13 06:20:33 LOG5 end_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2011-Dec-13 06:20:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-13 06:20:33 LOG5 end_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2011-Dec-13 06:20:33 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2011-Dec-13 06:20:33 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-13 06:20:33 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-13 06:20:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-13 06:20:33 LOG5 begin_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2011-Dec-13 06:20:33 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-13 06:20:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-13 06:20:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-13 06:20:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-13 06:20:33 LOG5 end_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2011-Dec-13 06:20:33 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2011-Dec-13 06:20:33 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2011-Dec-13 06:20:33 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2011-Dec-13 06:20:33 LOG5 antvel: Calling 'antvel 101332.400000 203510.900000 J Topocentric 0' 2011-Dec-13 06:20:33 LOG2 antvel: Precessing RA = 10:13:32.4 Dec = +20:35:10.9 Epoch = 2011.95076 J 2011-Dec-13 06:20:33 LOG2 antvel: Computed apparent RA = 10:14:13.3 Dec = +20:31:23.6 2011-Dec-13 06:20:33 LOG2 antvel: Parameters to Doppler: Topocentric 37233 2011 347 0.0 2011-Dec-13 06:20:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-13 06:20:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2011-Dec-13 06:20:33 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2011-Dec-13 06:20:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-13 06:20:33 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-13 06:20:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-13 06:20:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-13 06:20:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2011-Dec-13 06:20:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-13 06:20:33 LOG5 begin_task: Level: (3) ID = <10341> S