2011-Dec-09 03:58:43 BEGIN executive: CIMA executive starting ... 2011-Dec-09 03:58:43 NOTE executive: STARTING NEW CIMA SESSION 2011-Dec-09 03:58:43 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2011-Dec-09 03:58:43 INFO4 executive: This is an ON-LINE session 2011-Dec-09 03:58:43 INFO4 executive: This is a LOCAL session 2011-Dec-09 03:58:43 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2011-Dec-09 03:58:43 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'CF' 2011-Dec-09 03:58:43 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20111209' 2011-Dec-09 03:58:43 LOG2 log_preferences: Currently applied preferences: 2011-Dec-09 03:58:43 LOG2 log_preferences: prefs(dailylog) = daily 2011-Dec-09 03:58:43 LOG2 log_preferences: prefs(offlinelog) = skip 2011-Dec-09 03:58:43 LOG2 log_preferences: prefs(datawindow) = ignore 2011-Dec-09 03:58:43 LOG2 log_preferences: prefs(limitwarning) = enabled 2011-Dec-09 03:58:43 LOG2 log_preferences: prefs(wappfailure) = abort 2011-Dec-09 03:58:43 LOG2 log_preferences: prefs(helpstyle) = stay-open 2011-Dec-09 03:58:43 LOG2 log_preferences: prefs(logcolours) = full 2011-Dec-09 03:58:43 LOG2 log_preferences: prefs(displaylevel) = INFO3 2011-Dec-09 03:58:43 LOG2 log_preferences: prefs(loglevel) = LOG5 2011-Dec-09 03:58:43 LOG2 log_preferences: prefs(displayformat) = short 2011-Dec-09 03:58:43 LOG2 log_preferences: prefs(logformat) = new 2011-Dec-09 03:58:43 LOG2 log_preferences: prefs(fontsize) = 4 2011-Dec-09 03:58:43 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2011-Dec-09 03:58:43 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2011-Dec-09 03:58:43 ALERT executive: CIMA executive ready 2011-Dec-09 03:58:45 NOTE frontend: CIMA frontend ready 2011-Dec-09 03:58:45 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:58:45 LOG4 got_cormsg: From DATATAKING: setup 2011-Dec-09 03:58:49 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2011-Dec-09 03:58:49 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2011-Dec-09 03:58:49 LOG4 got_cormsg: From DATATAKING: vw% io 2011-Dec-09 03:58:49 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2011-Dec-09 03:58:49 LOG4 got_cormsg: From DATATAKING: 2011-Dec-09 03:58:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:58:50 LOG4 got_cormsg: From DATATAKING: tape stat 2011-Dec-09 03:58:50 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2011-Dec-09 03:58:50 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2011-Dec-09 03:58:50 LOG4 got_cormsg: From DATATAKING: vw% connectall 2011-Dec-09 03:58:50 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2011-Dec-09 03:58:50 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2011-Dec-09 03:58:50 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2011-Dec-09 03:58:50 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2011-Dec-09 03:58:50 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2011-Dec-09 03:58:50 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2011-Dec-09 03:58:50 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2011-Dec-09 03:58:50 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2011-Dec-09 03:58:50 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2011-Dec-09 03:58:50 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:58:50 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:58:52 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2011-Dec-09 03:58:52 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2011-Dec-09 03:58:52 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2011-Dec-09 03:58:52 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2011-Dec-09 03:58:52 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Dec-09 03:58:52 NOTE select_receiver: Starting to select receiver ALFA 2011-Dec-09 03:58:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2011-Dec-09 03:58:52 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2011-Dec-09 03:58:52 LOG3 vw_send: To DATATAKING: acvlbical off 2011-Dec-09 03:58:52 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2011-Dec-09 03:58:52 STOP finish_task: Finishing task 'selecting receiver ALFA' 2011-Dec-09 03:58:52 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Dec-09 03:58:52 DONE finish_task: DONE finished selecting: receiver ALFA 2011-Dec-09 03:58:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-09 03:58:52 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2011-Dec-09 03:58:52 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Dec-09 03:58:52 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2011-Dec-09 03:58:52 LOG4 got_cormsg: From DATATAKING: acvlbical off 2011-Dec-09 03:58:59 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:58:59 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:59:16 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima31.cmd' (at lines 1 - 24) 2011-Dec-09 03:59:16 INFO4 CIMA-load_command_file: Loaded command file '111209.cmd' 2011-Dec-09 03:59:32 INFO1 CIMA-run_command_file: Transferring command file '111209.cmd' to executive ... 2011-Dec-09 03:59:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_cima31.conf} 2011-Dec-09 03:59:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2011-Dec-09 03:59:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2011-Dec-09 03:59:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2011-Dec-09 03:59:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2011-Dec-09 03:59:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2011-Dec-09 03:59:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2011-Dec-09 03:59:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2011-Dec-09 03:59:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2011-Dec-09 03:59:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2011-Dec-09 03:59:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2011-Dec-09 03:59:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2011-Dec-09 03:59:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2011-Dec-09 03:59:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 28 {LOAD ages_mock.conf} 2011-Dec-09 03:59:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 29 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2011-Dec-09 03:59:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 30 {CATALOG AGESFull.cat} 2011-Dec-09 03:59:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 33 {IF LSTSLEW(AGES3193_p1_089) < 085641 THEN} 2011-Dec-09 03:59:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 34 {FIXEDDRIFT az=253.90 alfaangle=-57.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_089 ra=95300.00 dec=214100.00} 2011-Dec-09 03:59:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 37 {ENDIF} 2011-Dec-09 03:59:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 40 {IF LSTSLEW(AGES3193_p1_091) < 091941 THEN} 2011-Dec-09 03:59:33 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 41 {FIXEDDRIFT az=246.64 alfaangle=-47.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_091 ra=95300.00 dec=213800.00} 2011-Dec-09 03:59:33 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 44 {ENDIF} 2011-Dec-09 03:59:33 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 47 {IF LSTSLEW(AGES3193_p1_093) < 094241 THEN} 2011-Dec-09 03:59:33 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 48 {FIXEDDRIFT az=218.74 alfaangle=-16.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_093 ra=95300.00 dec=213500.00} 2011-Dec-09 03:59:33 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 51 {ENDIF} 2011-Dec-09 03:59:33 LOG4 exec_msg: From OBSERVER: store_command_file_line 26 54 {IF LSTSLEW(AGES3193_p1_095) < 101541 THEN} 2011-Dec-09 03:59:33 LOG4 exec_msg: From OBSERVER: store_command_file_line 27 55 {FIXEDDRIFT az=122.01 alfaangle=75.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_095 ra=95300.00 dec=213200.00} 2011-Dec-09 03:59:33 LOG4 exec_msg: From OBSERVER: store_command_file_line 28 58 {ENDIF} 2011-Dec-09 03:59:33 LOG4 exec_msg: From OBSERVER: store_command_file_line 29 61 {IF LSTSLEW(AGES3193_p1_097) < 104841 THEN} 2011-Dec-09 03:59:33 LOG4 exec_msg: From OBSERVER: store_command_file_line 30 62 {FIXEDDRIFT az=105.64 alfaangle=-83.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_097 ra=95300.00 dec=212900.00} 2011-Dec-09 03:59:33 LOG4 exec_msg: From OBSERVER: store_command_file_line 31 65 {ENDIF} 2011-Dec-09 03:59:33 COMMAND CIMA-send_to_exec: Sending command to run command file 2011-Dec-09 03:59:33 LOG4 exec_msg: From OBSERVER: run_command_file 111209.cmd 1 1 31 2011-Dec-09 03:59:33 LOG4 run_command_file: Calling 'run_command_file 111209.cmd 1 1 31' 2011-Dec-09 03:59:33 BEGIN begin_task: Starting task 'running command file '111209.cmd'' 2011-Dec-09 03:59:33 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2011-Dec-09 03:59:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '111209.cmd' ...} 2011-Dec-09 03:59:33 NOTE run_command_file: Starting execution of command file '111209.cmd' from line 1 2011-Dec-09 03:59:33 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_cima31.conf' 2011-Dec-09 03:59:33 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2011-Dec-09 03:59:33 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-09 03:59:33 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2011-Dec-09 03:59:33 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima31.conf' 2011-Dec-09 03:59:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2011-Dec-09 03:59:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2011-Dec-09 03:59:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2011-Dec-09 03:59:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2011-Dec-09 03:59:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2011-Dec-09 03:59:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2011-Dec-09 03:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2011-Dec-09 03:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2011-Dec-09 03:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2011-Dec-09 03:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2011-Dec-09 03:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2011-Dec-09 03:59:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-09 03:59:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-09 03:59:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-09 03:59:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-09 03:59:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2011-Dec-09 03:59:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2011-Dec-09 03:59:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2011-Dec-09 03:59:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2011-Dec-09 03:59:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2011-Dec-09 03:59:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2011-Dec-09 03:59:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2011-Dec-09 03:59:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2011-Dec-09 03:59:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-09 03:59:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-09 03:59:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-09 03:59:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-09 03:59:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2011-Dec-09 03:59:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2011-Dec-09 03:59:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2011-Dec-09 03:59:35 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-09 03:59:35 BEGIN begin_task: Starting task 'configuring IF/LO path' 2011-Dec-09 03:59:35 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Dec-09 03:59:35 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2011-Dec-09 03:59:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2011-Dec-09 03:59:35 INFO1 config_iflo: Selecting receiver ALFA 2011-Dec-09 03:59:35 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2011-Dec-09 03:59:35 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2011-Dec-09 03:59:35 START begin_task: Starting task 'selecting receiver ALFA' 2011-Dec-09 03:59:35 LOG5 begin_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Dec-09 03:59:35 NOTE select_receiver: Starting to select receiver ALFA 2011-Dec-09 03:59:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2011-Dec-09 03:59:35 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2011-Dec-09 03:59:35 LOG3 vw_send: To DATATAKING: acvlbical off 2011-Dec-09 03:59:35 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2011-Dec-09 03:59:35 STOP finish_task: Finishing task 'selecting receiver ALFA' 2011-Dec-09 03:59:35 LOG5 finish_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Dec-09 03:59:35 INFO2 finish_task: DONE finished selecting: receiver ALFA 2011-Dec-09 03:59:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 03:59:35 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2011-Dec-09 03:59:35 LOG5 end_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Dec-09 03:59:35 START begin_task: Starting task 'waiting for receiver ALFA' 2011-Dec-09 03:59:35 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2011-Dec-09 03:59:35 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2011-Dec-09 03:59:35 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2011-Dec-09 03:59:35 INFO1 config_iflo: Configuring rest of the IF/LO path 2011-Dec-09 03:59:35 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2011-Dec-09 03:59:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-09 03:59:35 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-09 03:59:35 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-09 03:59:35 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2011-Dec-09 03:59:35 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-09 03:59:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-09 03:59:35 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2011-Dec-09 03:59:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-09 03:59:35 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-09 03:59:35 LOG3 vw_send: To DATATAKING: alfafb 1 2011-Dec-09 03:59:36 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2011-Dec-09 03:59:36 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2011-Dec-09 03:59:36 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2011-Dec-09 03:59:36 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2011-Dec-09 03:59:36 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2011-Dec-09 03:59:36 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2011-Dec-09 03:59:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2011-Dec-09 03:59:36 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2011-Dec-09 03:59:36 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2011-Dec-09 03:59:36 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2011-Dec-09 03:59:36 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2011-Dec-09 03:59:36 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2011-Dec-09 03:59:36 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2011-Dec-09 03:59:36 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2011-Dec-09 03:59:36 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2011-Dec-09 03:59:36 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2011-Dec-09 03:59:36 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2011-Dec-09 03:59:36 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2011-Dec-09 03:59:36 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2011-Dec-09 03:59:36 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2011-Dec-09 03:59:36 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2011-Dec-09 03:59:36 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2011-Dec-09 03:59:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 03:59:36 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2011-Dec-09 03:59:36 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2011-Dec-09 03:59:36 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2011-Dec-09 03:59:36 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2011-Dec-09 03:59:36 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2011-Dec-09 03:59:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2011-Dec-09 03:59:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 03:59:36 START begin_task: Starting task 'waiting on configuring IF/LO path' 2011-Dec-09 03:59:36 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2011-Dec-09 03:59:36 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2011-Dec-09 03:59:36 LOG4 got_cormsg: From DATATAKING: acvlbical off 2011-Dec-09 03:59:36 LOG4 got_cormsg: From DATATAKING: alfafb 1 2011-Dec-09 03:59:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2011-Dec-09 03:59:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2011-Dec-09 03:59:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2011-Dec-09 03:59:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2011-Dec-09 03:59:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2011-Dec-09 03:59:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2011-Dec-09 03:59:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2011-Dec-09 03:59:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2011-Dec-09 03:59:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2011-Dec-09 03:59:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2011-Dec-09 03:59:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2011-Dec-09 03:59:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2011-Dec-09 03:59:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2011-Dec-09 03:59:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2011-Dec-09 03:59:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 03:59:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2011-Dec-09 03:59:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2011-Dec-09 03:59:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2011-Dec-09 03:59:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2011-Dec-09 03:59:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 03:59:42 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:59:42 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:59:43 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:59:43 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:59:43 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:59:44 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:59:48 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:59:48 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:59:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:59:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:59:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:59:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:59:50 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:59:50 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:59:50 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:59:50 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:59:50 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:59:50 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:59:51 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:59:51 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:59:51 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:59:51 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:59:51 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-09 03:59:51 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2011-Dec-09 03:59:51 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2011-Dec-09 03:59:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2011-Dec-09 03:59:51 STOP finish_task: Finishing task 'configuring IF/LO path' 2011-Dec-09 03:59:51 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Dec-09 03:59:51 DONE finish_task: DONE finished configuration: IF/LO path 2011-Dec-09 03:59:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-09 03:59:51 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2011-Dec-09 03:59:51 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Dec-09 03:59:51 BEGIN begin_task: Starting task 'configuring WAPPs' 2011-Dec-09 03:59:51 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2011-Dec-09 03:59:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2011-Dec-09 03:59:51 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2011-Dec-09 03:59:51 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Dec-09 03:59:51 START begin_task: Starting task 'selecting calibration port' 2011-Dec-09 03:59:51 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2011-Dec-09 03:59:51 LOG3 vw_send: To DATATAKING: calport 3 2011-Dec-09 03:59:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Dec-09 03:59:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 03:59:51 START begin_task: Starting task 'waiting on calport' 2011-Dec-09 03:59:51 LOG5 begin_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2011-Dec-09 03:59:51 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:59:52 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Dec-09 03:59:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 03:59:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:59:52 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-09 03:59:52 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Dec-09 03:59:52 LOG5 end_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2011-Dec-09 03:59:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Dec-09 03:59:52 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Dec-09 03:59:52 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2011-Dec-09 03:59:52 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-09 03:59:52 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-09 03:59:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-09 03:59:52 LOG5 begin_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2011-Dec-09 03:59:52 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-09 03:59:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:59:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-09 03:59:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-09 03:59:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-09 03:59:52 LOG5 end_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2011-Dec-09 03:59:52 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2011-Dec-09 03:59:52 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2011-Dec-09 03:59:52 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2011-Dec-09 03:59:52 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2011-Dec-09 03:59:52 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2011-Dec-09 03:59:52 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2011-Dec-09 03:59:52 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2011-Dec-09 03:59:52 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2011-Dec-09 03:59:52 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 CF 2011-Dec-09 03:59:52 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 CF 2011-Dec-09 03:59:52 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 CF 2011-Dec-09 03:59:52 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 CF 2011-Dec-09 03:59:52 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Dec-09 03:59:52 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Dec-09 03:59:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-09 03:59:52 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2011-Dec-09 03:59:52 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-09 03:59:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-09 03:59:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-09 03:59:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-09 03:59:52 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2011-Dec-09 03:59:52 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 CF 2011-Dec-09 03:59:52 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 CF 2011-Dec-09 03:59:52 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 CF 2011-Dec-09 03:59:52 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 CF 2011-Dec-09 03:59:53 STOP finish_task: Finishing task 'configuring WAPPs' 2011-Dec-09 03:59:53 LOG5 finish_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2011-Dec-09 03:59:53 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2011-Dec-09 03:59:53 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-09 03:59:53 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2011-Dec-09 03:59:53 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2011-Dec-09 03:59:53 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2011-Dec-09 03:59:53 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2011-Dec-09 03:59:53 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2011-Dec-09 03:59:53 LOG3 is_if_valid: Current source data: up 249.8 14.7 UP - - 142 5.0 2011-Dec-09 03:59:53 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2011-Dec-09 03:59:53 INFO5 is_if_valid: Condition parsed as: 1 2011-Dec-09 03:59:53 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2011-Dec-09 03:59:53 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc nooffset nowait' 2011-Dec-09 03:59:53 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2011-Dec-09 03:59:53 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2011-Dec-09 03:59:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2011-Dec-09 03:59:53 LOG3 track_source: Calling 'track_source galfasrc 094300.0 +225300 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2011-Dec-09 03:59:53 START begin_task: Starting task 'sending tracking commands' 2011-Dec-09 03:59:53 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2011-Dec-09 03:59:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2011-Dec-09 03:59:53 INFO1 track_source: Starting to track galfasrc 2011-Dec-09 03:59:53 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2011-Dec-09 03:59:53 LOG3 vw_send: To DATATAKING: set ra 094300.0 2011-Dec-09 03:59:53 LOG3 vw_send: To DATATAKING: set dec +225300 2011-Dec-09 03:59:53 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-09 03:59:53 LOG3 vw_send: To DATATAKING: pnt tr 094300.0 +225300 -CJ 2011-Dec-09 03:59:53 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2011-Dec-09 03:59:53 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-09 03:59:53 LOG5 finish_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2011-Dec-09 03:59:53 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-09 03:59:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 03:59:53 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-09 03:59:53 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2011-Dec-09 03:59:53 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2011-Dec-09 03:59:53 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2011-Dec-09 03:59:53 DONE finish_task: DONE finished tracking: source 'galfasrc' 2011-Dec-09 03:59:53 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-09 03:59:53 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2011-Dec-09 03:59:53 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2011-Dec-09 03:59:53 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2011-Dec-09 03:59:53 INFO1 run_command_line: Skipping line 'ELSEIF isup(galfasrc2) then' since an earlier condition already has been true 2011-Dec-09 03:59:54 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2011-Dec-09 03:59:54 INFO1 run_command_line: Skipping line 'GOTO galfasrc2' in non-true conditional branch 2011-Dec-09 03:59:54 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2011-Dec-09 03:59:54 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2011-Dec-09 03:59:54 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2011-Dec-09 03:59:54 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2011-Dec-09 03:59:54 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2011-Dec-09 03:59:54 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2011-Dec-09 03:59:54 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2011-Dec-09 03:59:54 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2011-Dec-09 03:59:54 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2011-Dec-09 03:59:54 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2011-Dec-09 03:59:54 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2011-Dec-09 03:59:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2011-Dec-09 03:59:54 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2011-Dec-09 03:59:54 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2011-Dec-09 03:59:54 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-09 03:59:54 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-09 03:59:54 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2011-Dec-09 03:59:54 NOTE WAPPDATA-new_file: New FITS file: wapp.20111209.a2048.0000.fits 2011-Dec-09 03:59:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 CF' 2011-Dec-09 03:59:54 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2011-Dec-09 03:59:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2011-Dec-09 03:59:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2011-Dec-09 03:59:54 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20111209.a2048.0000.fits} 2011-Dec-09 03:59:54 LOG4 got_cormsg: From DATATAKING: set ra 094300.0 2011-Dec-09 03:59:54 LOG4 got_cormsg: From DATATAKING: vw% 094300.0 2011-Dec-09 03:59:54 LOG4 got_cormsg: From DATATAKING: 2011-Dec-09 03:59:54 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 03:59:54 LOG4 got_cormsg: From DATATAKING: set dec +225300 2011-Dec-09 03:59:54 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-09 03:59:54 LOG4 got_cormsg: From DATATAKING: pnt tr 094300.0 +225300 -CJ 2011-Dec-09 03:59:54 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2011-Dec-09 03:59:54 LOG4 got_cormsg: From DATATAKING: +225300 2011-Dec-09 03:59:54 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2011-Dec-09 03:59:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 CF' 2011-Dec-09 04:00:22 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-09 04:00:22 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2011-Dec-09 04:00:22 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-09 04:00:22 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2011-Dec-09 04:00:22 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-09 04:00:22 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2011-Dec-09 04:00:22 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2011-Dec-09 04:00:22 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2011-Dec-09 04:00:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-09 04:00:22 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2011-Dec-09 04:00:22 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2011-Dec-09 04:00:22 COMMAND run_command_line: EXECUTING command 16: 'WAITTRACK' 2011-Dec-09 04:00:22 BEGIN begin_task: Starting task 'waiting on telescope' 2011-Dec-09 04:00:22 LOG5 begin_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2011-Dec-09 04:00:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-09 04:00:22 LOG3 waittrk: Start waittrk 5 2011-Dec-09 04:00:22 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-09 04:00:22 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2011-Dec-09 04:00:27 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-09 04:00:27 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2011-Dec-09 04:00:27 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-09 04:00:27 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2011-Dec-09 04:04:57 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-09 04:04:57 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2011-Dec-09 04:04:57 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-09 04:04:57 INFO2 waittrk: Now tracking galfasrc 2011-Dec-09 04:04:57 LOG4 waittrk: Current telescope position: Az = 248.02 ZA = 13.60 2011-Dec-09 04:04:57 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-09 04:04:57 LOG5 finish_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2011-Dec-09 04:04:57 DONE finish_task: DONE finished waiting: telescope on source 2011-Dec-09 04:04:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-09 04:04:57 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-09 04:04:57 LOG5 end_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2011-Dec-09 04:04:57 COMMAND run_command_line: EXECUTING command 20: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2011-Dec-09 04:04:57 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2011-Dec-09 04:04:57 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-09 04:04:57 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2011-Dec-09 04:04:57 BEGIN begin_task: Starting task 'smart frequency switching' 2011-Dec-09 04:04:57 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2011-Dec-09 04:04:57 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2011-Dec-09 04:04:57 INFO1 smartfreq: Starting pattern: Smart frequency switching 2011-Dec-09 04:04:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2011-Dec-09 04:04:57 START begin_task: Starting task 'selecting calibration type' 2011-Dec-09 04:04:57 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2011-Dec-09 04:04:57 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-09 04:04:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-09 04:04:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 04:04:57 START begin_task: Starting task 'waiting on setcal' 2011-Dec-09 04:04:57 LOG5 begin_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2011-Dec-09 04:04:57 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-09 04:04:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 04:04:57 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:04:57 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-09 04:04:57 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-09 04:04:57 LOG5 end_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2011-Dec-09 04:04:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-09 04:04:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-09 04:04:58 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-09 04:04:58 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-09 04:04:58 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2011-Dec-09 04:04:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:04:58 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-09 04:04:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-09 04:04:58 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2011-Dec-09 04:04:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-09 04:04:58 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-09 04:04:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-09 04:04:58 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-09 04:04:58 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-09 04:04:58 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2011-Dec-09 04:04:58 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-09 04:04:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-09 04:04:58 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2011-Dec-09 04:04:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-09 04:04:58 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-09 04:04:58 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-09 04:04:58 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2011-Dec-09 04:04:58 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 CF 2011-Dec-09 04:04:58 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 CF 2011-Dec-09 04:04:58 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 CF 2011-Dec-09 04:04:58 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 CF 2011-Dec-09 04:04:58 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20111209.a2048.0000.fits' is empty! 2011-Dec-09 04:04:58 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2011-Dec-09 04:04:58 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-09 04:04:58 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2011-Dec-09 04:04:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-09 04:04:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-09 04:04:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-09 04:04:58 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2011-Dec-09 04:04:58 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-09 04:04:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-09 04:04:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-09 04:04:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-09 04:04:58 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2011-Dec-09 04:04:58 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2011-Dec-09 04:04:58 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-09 04:04:58 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2011-Dec-09 04:04:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2011-Dec-09 04:04:58 INFO2 adjust_power: Starting to adjust WAPP power 2011-Dec-09 04:04:58 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-09 04:04:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-09 04:04:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 04:04:58 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-09 04:04:58 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2011-Dec-09 04:04:58 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-09 04:04:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 04:04:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 CF' 2011-Dec-09 04:05:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:05:01 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-09 04:05:01 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-09 04:05:01 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2011-Dec-09 04:05:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-09 04:05:01 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-09 04:05:01 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2011-Dec-09 04:05:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-09 04:05:01 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-09 04:05:01 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-09 04:05:01 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-09 04:05:01 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-09 04:05:01 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-09 04:05:01 LOG5 begin_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2011-Dec-09 04:05:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-09 04:05:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:05:02 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 8 6 dB 2011-Dec-09 04:05:02 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2011-Dec-09 04:05:02 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 3 dB 2011-Dec-09 04:05:02 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 4 dB --- beam 3: 2 2 dB 2011-Dec-09 04:05:02 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-09 04:05:02 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-09 04:05:02 LOG5 end_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2011-Dec-09 04:05:02 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.893 1.052 ALFA beam 1: 0.919 0.968 2011-Dec-09 04:05:02 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.078 0.976 ALFA beam 3: 1.011 1.102 2011-Dec-09 04:05:02 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.800 1.079 ALFA beam 5: 0.904 1.065 2011-Dec-09 04:05:02 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.070 0.014 ALFA beam 7: 0.922 0.014 2011-Dec-09 04:05:02 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-09 04:05:02 LOG5 finish_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2011-Dec-09 04:05:02 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-09 04:05:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:05:02 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-09 04:05:02 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2011-Dec-09 04:05:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-09 04:05:02 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-09 04:05:02 LOG5 finish_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2011-Dec-09 04:05:02 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2011-Dec-09 04:05:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:05:02 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-09 04:05:02 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2011-Dec-09 04:05:02 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2011-Dec-09 04:05:02 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-09 04:05:02 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2011-Dec-09 04:05:02 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Dec-09 04:05:02 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.93955 J 2011-Dec-09 04:05:02 LOG2 antvel: Computed apparent RA = 09:43:42.1 Dec = +22:49:29.2 2011-Dec-09 04:05:02 LOG2 antvel: Parameters to Doppler: Topocentric 29101 2011 343 0.0 2011-Dec-09 04:05:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-09 04:05:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2011-Dec-09 04:05:02 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2011-Dec-09 04:05:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:05:02 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:05:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-09 04:05:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:05:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2011-Dec-09 04:05:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-09 04:05:02 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2011-Dec-09 04:05:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-09 04:05:02 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.814802 2011.9395486665651 18.999933 2011-Dec-09 04:05:02 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 22.883333333333333 2011-Dec-09 04:05:02 LOG4 log_alfabeam: ALFABEAM 1 9.709774968291944 22.836514721659938 2011-Dec-09 04:05:02 LOG4 log_alfabeam: ALFABEAM 2 9.716042091787015 22.790693834565634 2011-Dec-09 04:05:02 LOG4 log_alfabeam: ALFABEAM 3 9.722948591868043 22.837060506915954 2011-Dec-09 04:05:02 LOG4 log_alfabeam: ALFABEAM 4 9.723556090639569 22.930331638222547 2011-Dec-09 04:05:02 LOG4 log_alfabeam: ALFABEAM 5 9.717245588825515 22.976232048872937 2011-Dec-09 04:05:02 LOG4 log_alfabeam: ALFABEAM 6 9.710371227648011 22.928782899051232 2011-Dec-09 04:05:02 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134300192 2011-Dec-09 04:05:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-09 04:05:03 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2011-Dec-09 04:05:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:05:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-09 04:05:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:05:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:05:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:05:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-09 04:05:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29104.00 2011-Dec-09 04:05:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:05:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:05:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:05:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:05:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:05:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:05:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:05:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:05:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:05:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-09 04:05:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.893 1.052 0.919 0.968 2011-Dec-09 04:05:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 0.976 1.011 1.102 2011-Dec-09 04:05:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.793 1.073 0.929 1.078 2011-Dec-09 04:05:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.070 0.014 0.922 0.014 2011-Dec-09 04:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2011-Dec-09 04:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2011-Dec-09 04:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.111 (still bad) 2011-Dec-09 04:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.112 (still bad) 2011-Dec-09 04:05:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:05:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-09 04:05:14 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2011-Dec-09 04:05:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-09 04:05:14 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2011-Dec-09 04:05:14 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2011-Dec-09 04:05:14 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-09 04:05:14 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2011-Dec-09 04:05:14 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Dec-09 04:05:14 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.93955 J 2011-Dec-09 04:05:14 LOG2 antvel: Computed apparent RA = 09:43:42.1 Dec = +22:49:29.2 2011-Dec-09 04:05:14 LOG2 antvel: Parameters to Doppler: Topocentric 29114 2011 343 0.0 2011-Dec-09 04:05:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-09 04:05:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2011-Dec-09 04:05:14 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2011-Dec-09 04:05:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:05:14 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:05:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-09 04:05:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:05:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2011-Dec-09 04:05:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-09 04:05:14 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2011-Dec-09 04:05:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-09 04:05:14 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.818423 2011.9395490785103 18.999933 2011-Dec-09 04:05:14 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 22.883333333333347 2011-Dec-09 04:05:14 LOG4 log_alfabeam: ALFABEAM 1 9.709779754027014 22.836380563862349 2011-Dec-09 04:05:14 LOG4 log_alfabeam: ALFABEAM 2 9.716051478783919 22.790682204996227 2011-Dec-09 04:05:14 LOG4 log_alfabeam: ALFABEAM 3 9.722953303590215 22.837181884266450 2011-Dec-09 04:05:14 LOG4 log_alfabeam: ALFABEAM 4 9.723551264037367 22.930466658030838 2011-Dec-09 04:05:14 LOG4 log_alfabeam: ALFABEAM 5 9.717235991301484 22.976243738490997 2011-Dec-09 04:05:14 LOG4 log_alfabeam: ALFABEAM 6 9.710366568897278 22.928658432958592 2011-Dec-09 04:05:14 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134300193 2011-Dec-09 04:05:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-09 04:05:15 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2011-Dec-09 04:05:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:05:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-09 04:05:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:05:15 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:05:15 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.112 (still bad) 2011-Dec-09 04:05:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-09 04:05:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29116.00 2011-Dec-09 04:05:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:05:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:05:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:05:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:05:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:05:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:05:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:05:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:05:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.112 (still bad) 2011-Dec-09 04:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.144 (still bad) 2011-Dec-09 04:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.146 (still bad) 2011-Dec-09 04:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.143 (still bad) 2011-Dec-09 04:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.144 (still bad) 2011-Dec-09 04:05:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:05:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-09 04:05:26 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2011-Dec-09 04:05:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-09 04:05:26 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2011-Dec-09 04:05:26 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2011-Dec-09 04:05:26 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-09 04:05:26 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2011-Dec-09 04:05:26 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Dec-09 04:05:26 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.93955 J 2011-Dec-09 04:05:26 LOG2 antvel: Computed apparent RA = 09:43:42.1 Dec = +22:49:29.2 2011-Dec-09 04:05:26 LOG2 antvel: Parameters to Doppler: Topocentric 29126 2011 343 0.0 2011-Dec-09 04:05:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-09 04:05:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2011-Dec-09 04:05:26 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2011-Dec-09 04:05:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:05:26 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:05:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-09 04:05:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:05:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2011-Dec-09 04:05:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-09 04:05:26 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2011-Dec-09 04:05:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-09 04:05:26 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.821766 2011.9395494587673 18.999933 2011-Dec-09 04:05:26 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 22.883333333333333 2011-Dec-09 04:05:26 LOG4 log_alfabeam: ALFABEAM 1 9.709784210997499 22.836256048934377 2011-Dec-09 04:05:26 LOG4 log_alfabeam: ALFABEAM 2 9.716060197920083 22.790671567015497 2011-Dec-09 04:05:26 LOG4 log_alfabeam: ALFABEAM 3 9.722957668597257 22.837294694799908 2011-Dec-09 04:05:26 LOG4 log_alfabeam: ALFABEAM 4 9.723546768916442 22.930591972639814 2011-Dec-09 04:05:26 LOG4 log_alfabeam: ALFABEAM 5 9.717227076492390 22.976254425836640 2011-Dec-09 04:05:26 LOG4 log_alfabeam: ALFABEAM 6 9.710362253642314 22.928542753285722 2011-Dec-09 04:05:26 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134300194 2011-Dec-09 04:05:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-09 04:05:27 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2011-Dec-09 04:05:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:05:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-09 04:05:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:05:27 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:05:27 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:05:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-09 04:05:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29128.00 2011-Dec-09 04:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.145 (still bad) 2011-Dec-09 04:05:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:05:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:05:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:05:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:05:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:05:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:05:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:05:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:05:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.145 (still bad) 2011-Dec-09 04:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.143 (still bad) 2011-Dec-09 04:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.144 (still bad) 2011-Dec-09 04:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.141 (still bad) 2011-Dec-09 04:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.141 (still bad) 2011-Dec-09 04:05:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:05:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-09 04:05:38 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2011-Dec-09 04:05:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-09 04:05:38 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2011-Dec-09 04:05:38 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2011-Dec-09 04:05:38 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-09 04:05:38 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2011-Dec-09 04:05:38 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Dec-09 04:05:38 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.93955 J 2011-Dec-09 04:05:38 LOG2 antvel: Computed apparent RA = 09:43:42.1 Dec = +22:49:29.2 2011-Dec-09 04:05:38 LOG2 antvel: Parameters to Doppler: Topocentric 29138 2011 343 0.0 2011-Dec-09 04:05:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-09 04:05:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2011-Dec-09 04:05:38 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2011-Dec-09 04:05:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:05:38 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:05:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-09 04:05:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:05:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2011-Dec-09 04:05:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-09 04:05:38 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2011-Dec-09 04:05:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-09 04:05:38 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.825108 2011.9395498390245 18.999933 2011-Dec-09 04:05:38 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 22.883333333333329 2011-Dec-09 04:05:38 LOG4 log_alfabeam: ALFABEAM 1 9.709788704180694 22.836130935459270 2011-Dec-09 04:05:38 LOG4 log_alfabeam: ALFABEAM 2 9.716068965624645 22.790661029161804 2011-Dec-09 04:05:38 LOG4 log_alfabeam: ALFABEAM 3 9.722962046765288 22.837408200590371 2011-Dec-09 04:05:38 LOG4 log_alfabeam: ALFABEAM 4 9.723542237185121 22.930717889269037 2011-Dec-09 04:05:38 LOG4 log_alfabeam: ALFABEAM 5 9.717218111906154 22.976265007092714 2011-Dec-09 04:05:38 LOG4 log_alfabeam: ALFABEAM 6 9.710357926037469 22.928426362255816 2011-Dec-09 04:05:38 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134300195 2011-Dec-09 04:05:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-09 04:05:39 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2011-Dec-09 04:05:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:05:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-09 04:05:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:05:39 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:05:39 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:05:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-09 04:05:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29140.00 2011-Dec-09 04:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.144 (still bad) 2011-Dec-09 04:05:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:05:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:05:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:05:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:05:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:05:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:05:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:05:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:05:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.132 (still bad) 2011-Dec-09 04:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.140 (still bad) 2011-Dec-09 04:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.131 (still bad) 2011-Dec-09 04:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2011-Dec-09 04:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.133 (still bad) 2011-Dec-09 04:05:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:05:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-09 04:05:50 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2011-Dec-09 04:05:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-09 04:05:50 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2011-Dec-09 04:05:50 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2011-Dec-09 04:05:50 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-09 04:05:50 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2011-Dec-09 04:05:50 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Dec-09 04:05:50 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.93955 J 2011-Dec-09 04:05:50 LOG2 antvel: Computed apparent RA = 09:43:42.1 Dec = +22:49:29.2 2011-Dec-09 04:05:50 LOG2 antvel: Parameters to Doppler: Topocentric 29150 2011 343 0.0 2011-Dec-09 04:05:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-09 04:05:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2011-Dec-09 04:05:50 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2011-Dec-09 04:05:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:05:50 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:05:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-09 04:05:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:05:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2011-Dec-09 04:05:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-09 04:05:50 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2011-Dec-09 04:05:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-09 04:05:50 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.828451 2011.9395502192815 18.999933 2011-Dec-09 04:05:50 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 22.883333333333347 2011-Dec-09 04:05:50 LOG4 log_alfabeam: ALFABEAM 1 9.709793236708608 22.836005143362065 2011-Dec-09 04:05:50 LOG4 log_alfabeam: ALFABEAM 2 9.716077787625020 22.790650587307518 2011-Dec-09 04:05:50 LOG4 log_alfabeam: ALFABEAM 3 9.722966440760883 22.837522476946184 2011-Dec-09 04:05:50 LOG4 log_alfabeam: ALFABEAM 4 9.723537665683160 22.930844488490504 2011-Dec-09 04:05:50 LOG4 log_alfabeam: ALFABEAM 5 9.717209091686522 22.976275486294394 2011-Dec-09 04:05:50 LOG4 log_alfabeam: ALFABEAM 6 9.710353583458959 22.928309182704091 2011-Dec-09 04:05:50 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134300196 2011-Dec-09 04:05:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-09 04:05:51 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2011-Dec-09 04:05:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:05:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-09 04:05:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:05:51 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:05:51 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:05:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-09 04:05:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29152.00 2011-Dec-09 04:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.131 (still bad) 2011-Dec-09 04:05:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:05:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:05:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:05:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:05:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:05:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:05:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:05:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:05:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2011-Dec-09 04:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.112 (still bad) 2011-Dec-09 04:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2011-Dec-09 04:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2011-Dec-09 04:06:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:06:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-09 04:06:02 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2011-Dec-09 04:06:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-09 04:06:02 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2011-Dec-09 04:06:02 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2011-Dec-09 04:06:02 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-09 04:06:02 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2011-Dec-09 04:06:02 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Dec-09 04:06:02 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.93955 J 2011-Dec-09 04:06:02 LOG2 antvel: Computed apparent RA = 09:43:42.1 Dec = +22:49:29.2 2011-Dec-09 04:06:02 LOG2 antvel: Parameters to Doppler: Topocentric 29162 2011 343 0.0 2011-Dec-09 04:06:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-09 04:06:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2011-Dec-09 04:06:02 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2011-Dec-09 04:06:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:06:02 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:06:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-09 04:06:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:06:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2011-Dec-09 04:06:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-09 04:06:02 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2011-Dec-09 04:06:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-09 04:06:02 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.831793 2011.9395505995385 18.999933 2011-Dec-09 04:06:02 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 22.883333333333340 2011-Dec-09 04:06:02 LOG4 log_alfabeam: ALFABEAM 1 9.709797806319003 22.835878742651424 2011-Dec-09 04:06:02 LOG4 log_alfabeam: ALFABEAM 2 9.716086659129143 22.790640249921605 2011-Dec-09 04:06:02 LOG4 log_alfabeam: ALFABEAM 3 9.722970848000946 22.837637462971959 2011-Dec-09 04:06:02 LOG4 log_alfabeam: ALFABEAM 4 9.723533056690888 22.930971699828874 2011-Dec-09 04:06:02 LOG4 log_alfabeam: ALFABEAM 5 9.717200020733047 22.976285854829602 2011-Dec-09 04:06:02 LOG4 log_alfabeam: ALFABEAM 6 9.710349228471895 22.928191277132111 2011-Dec-09 04:06:02 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134300197 2011-Dec-09 04:06:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-09 04:06:03 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2011-Dec-09 04:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2011-Dec-09 04:06:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:06:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-09 04:06:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:06:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:06:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:06:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-09 04:06:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29164.00 2011-Dec-09 04:06:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:06:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:06:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:06:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:06:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:06:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:06:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:06:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.103 (still bad) 2011-Dec-09 04:06:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:06:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-09 04:06:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.895 1.052 0.922 0.969 2011-Dec-09 04:06:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.102 0.992 1.022 1.108 2011-Dec-09 04:06:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.795 1.074 0.905 1.068 2011-Dec-09 04:06:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.075 0.023 0.933 0.024 2011-Dec-09 04:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2011-Dec-09 04:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2011-Dec-09 04:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2011-Dec-09 04:06:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:06:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-09 04:06:14 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2011-Dec-09 04:06:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-09 04:06:14 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2011-Dec-09 04:06:14 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2011-Dec-09 04:06:14 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-09 04:06:14 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2011-Dec-09 04:06:14 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Dec-09 04:06:14 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.93955 J 2011-Dec-09 04:06:14 LOG2 antvel: Computed apparent RA = 09:43:42.1 Dec = +22:49:29.2 2011-Dec-09 04:06:14 LOG2 antvel: Parameters to Doppler: Topocentric 29174 2011 343 0.0 2011-Dec-09 04:06:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-09 04:06:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2011-Dec-09 04:06:14 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2011-Dec-09 04:06:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:06:14 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:06:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-09 04:06:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:06:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2011-Dec-09 04:06:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-09 04:06:14 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2011-Dec-09 04:06:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-09 04:06:14 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.835135 2011.9395509797955 18.999933 2011-Dec-09 04:06:14 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 22.883333333333333 2011-Dec-09 04:06:14 LOG4 log_alfabeam: ALFABEAM 1 9.709802414817887 22.835751690498640 2011-Dec-09 04:06:14 LOG4 log_alfabeam: ALFABEAM 2 9.716095583259547 22.790630016132251 2011-Dec-09 04:06:14 LOG4 log_alfabeam: ALFABEAM 3 9.722975269842529 22.837753200306338 2011-Dec-09 04:06:14 LOG4 log_alfabeam: ALFABEAM 4 9.723528408385386 22.931099566369959 2011-Dec-09 04:06:14 LOG4 log_alfabeam: ALFABEAM 5 9.717190895852864 22.976296113459338 2011-Dec-09 04:06:14 LOG4 log_alfabeam: ALFABEAM 6 9.710344859747439 22.928072602903839 2011-Dec-09 04:06:14 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134300198 2011-Dec-09 04:06:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-09 04:06:15 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2011-Dec-09 04:06:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:06:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-09 04:06:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:06:15 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:06:15 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2011-Dec-09 04:06:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-09 04:06:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29176.00 2011-Dec-09 04:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2011-Dec-09 04:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2011-Dec-09 04:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2011-Dec-09 04:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2011-Dec-09 04:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2011-Dec-09 04:06:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:06:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-09 04:06:26 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2011-Dec-09 04:06:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-09 04:06:26 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2011-Dec-09 04:06:26 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2011-Dec-09 04:06:26 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-09 04:06:26 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-09 04:06:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-09 04:06:26 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2011-Dec-09 04:06:26 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-09 04:06:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-09 04:06:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-09 04:06:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-09 04:06:26 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2011-Dec-09 04:06:26 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2011-Dec-09 04:06:26 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2011-Dec-09 04:06:26 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2011-Dec-09 04:06:26 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Dec-09 04:06:26 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.93955 J 2011-Dec-09 04:06:26 LOG2 antvel: Computed apparent RA = 09:43:42.1 Dec = +22:49:29.2 2011-Dec-09 04:06:26 LOG2 antvel: Parameters to Doppler: Topocentric 29186 2011 343 0.0 2011-Dec-09 04:06:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-09 04:06:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2011-Dec-09 04:06:26 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2011-Dec-09 04:06:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:06:26 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:06:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-09 04:06:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:06:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2011-Dec-09 04:06:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-09 04:06:26 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2011-Dec-09 04:06:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2011-Dec-09 04:06:26 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.838478 2011.9395513600525 18.999933 2011-Dec-09 04:06:26 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 22.883333333333347 2011-Dec-09 04:06:26 LOG4 log_alfabeam: ALFABEAM 1 9.709807064064552 22.835623943245501 2011-Dec-09 04:06:26 LOG4 log_alfabeam: ALFABEAM 2 9.716104563207503 22.790619885237721 2011-Dec-09 04:06:26 LOG4 log_alfabeam: ALFABEAM 3 9.722979707659281 22.837869731583776 2011-Dec-09 04:06:26 LOG4 log_alfabeam: ALFABEAM 4 9.723523718889870 22.931228132033393 2011-Dec-09 04:06:26 LOG4 log_alfabeam: ALFABEAM 5 9.717181713782741 22.976306262764620 2011-Dec-09 04:06:26 LOG4 log_alfabeam: ALFABEAM 6 9.710340475941416 22.927953116365764 2011-Dec-09 04:06:26 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134300199 2011-Dec-09 04:06:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-09 04:06:27 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2011-Dec-09 04:06:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:06:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-09 04:06:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:06:27 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:06:27 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:06:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2011-Dec-09 04:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2011-Dec-09 04:06:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29188.00 2011-Dec-09 04:06:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:06:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:06:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:06:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:06:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:06:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:06:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:06:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:06:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.506 (still bad) 2011-Dec-09 04:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.514 (still bad) 2011-Dec-09 04:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.512 (still bad) 2011-Dec-09 04:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.509 (still bad) 2011-Dec-09 04:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.512 (still bad) 2011-Dec-09 04:06:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:06:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-09 04:06:38 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2011-Dec-09 04:06:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-09 04:06:38 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2011-Dec-09 04:06:38 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2011-Dec-09 04:06:38 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2011-Dec-09 04:06:38 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2011-Dec-09 04:06:38 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Dec-09 04:06:38 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.93955 J 2011-Dec-09 04:06:38 LOG2 antvel: Computed apparent RA = 09:43:42.1 Dec = +22:49:29.2 2011-Dec-09 04:06:38 LOG2 antvel: Parameters to Doppler: Topocentric 29198 2011 343 0.0 2011-Dec-09 04:06:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-09 04:06:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2011-Dec-09 04:06:38 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2011-Dec-09 04:06:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:06:38 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:06:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-09 04:06:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:06:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2011-Dec-09 04:06:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-09 04:06:38 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2011-Dec-09 04:06:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2011-Dec-09 04:06:38 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.841820 2011.9395517403098 18.999933 2011-Dec-09 04:06:38 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 22.883333333333329 2011-Dec-09 04:06:38 LOG4 log_alfabeam: ALFABEAM 1 9.709811751747061 22.835495571921175 2011-Dec-09 04:06:38 LOG4 log_alfabeam: ALFABEAM 2 9.716113594103609 22.790609865659249 2011-Dec-09 04:06:38 LOG4 log_alfabeam: ALFABEAM 3 9.722984158839298 22.837986994849192 2011-Dec-09 04:06:38 LOG4 log_alfabeam: ALFABEAM 4 9.723518990534885 22.931357325316199 2011-Dec-09 04:06:38 LOG4 log_alfabeam: ALFABEAM 5 9.717172479501576 22.976316294185374 2011-Dec-09 04:06:38 LOG4 log_alfabeam: ALFABEAM 6 9.710336079646854 22.927832881107463 2011-Dec-09 04:06:38 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134300200 2011-Dec-09 04:06:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-09 04:06:39 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2011-Dec-09 04:06:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:06:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-09 04:06:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:06:39 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:06:39 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:06:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2011-Dec-09 04:06:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29200.00 2011-Dec-09 04:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.512 (still bad) 2011-Dec-09 04:06:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:06:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:06:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:06:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:06:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:06:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:06:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:06:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:06:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:06:42 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.553 (still bad) 2011-Dec-09 04:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.557 (still bad) 2011-Dec-09 04:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.555 (still bad) 2011-Dec-09 04:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.552 (still bad) 2011-Dec-09 04:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.553 (still bad) 2011-Dec-09 04:06:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:06:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-09 04:06:50 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2011-Dec-09 04:06:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-09 04:06:50 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2011-Dec-09 04:06:50 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2011-Dec-09 04:06:50 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2011-Dec-09 04:06:50 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2011-Dec-09 04:06:50 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Dec-09 04:06:50 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.93955 J 2011-Dec-09 04:06:50 LOG2 antvel: Computed apparent RA = 09:43:42.1 Dec = +22:49:29.2 2011-Dec-09 04:06:50 LOG2 antvel: Parameters to Doppler: Topocentric 29210 2011 343 0.0 2011-Dec-09 04:06:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-09 04:06:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2011-Dec-09 04:06:50 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2011-Dec-09 04:06:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:06:50 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:06:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-09 04:06:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:06:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2011-Dec-09 04:06:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-09 04:06:50 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2011-Dec-09 04:06:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2011-Dec-09 04:06:50 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.845163 2011.9395521205668 18.999933 2011-Dec-09 04:06:50 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 22.883333333333333 2011-Dec-09 04:06:50 LOG4 log_alfabeam: ALFABEAM 1 9.709816481147421 22.835366494252305 2011-Dec-09 04:06:50 LOG4 log_alfabeam: ALFABEAM 2 9.716122681861419 22.790599953810094 2011-Dec-09 04:06:50 LOG4 log_alfabeam: ALFABEAM 3 9.722988626088496 22.838105068142230 2011-Dec-09 04:06:50 LOG4 log_alfabeam: ALFABEAM 4 9.723514220008528 22.931487228999423 2011-Dec-09 04:06:50 LOG4 log_alfabeam: ALFABEAM 5 9.717163186962564 22.976326211185235 2011-Dec-09 04:06:50 LOG4 log_alfabeam: ALFABEAM 6 9.710331668204315 22.927711817176402 2011-Dec-09 04:06:50 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134300201 2011-Dec-09 04:06:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-09 04:06:51 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2011-Dec-09 04:06:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:06:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-09 04:06:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:06:51 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:06:51 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:06:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2011-Dec-09 04:06:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29212.00 2011-Dec-09 04:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.554 (still bad) 2011-Dec-09 04:06:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:06:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:06:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:06:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:06:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:06:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:06:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:06:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:06:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.549 (still bad) 2011-Dec-09 04:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.554 (still bad) 2011-Dec-09 04:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.554 (still bad) 2011-Dec-09 04:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.550 (still bad) 2011-Dec-09 04:07:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.552 (still bad) 2011-Dec-09 04:07:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-09 04:07:02 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2011-Dec-09 04:07:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-09 04:07:02 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2011-Dec-09 04:07:02 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2011-Dec-09 04:07:02 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2011-Dec-09 04:07:02 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2011-Dec-09 04:07:02 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Dec-09 04:07:02 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.93955 J 2011-Dec-09 04:07:02 LOG2 antvel: Computed apparent RA = 09:43:42.1 Dec = +22:49:29.2 2011-Dec-09 04:07:02 LOG2 antvel: Parameters to Doppler: Topocentric 29222 2011 343 0.0 2011-Dec-09 04:07:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-09 04:07:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2011-Dec-09 04:07:02 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2011-Dec-09 04:07:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:07:02 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:07:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-09 04:07:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:07:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2011-Dec-09 04:07:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-09 04:07:02 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2011-Dec-09 04:07:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2011-Dec-09 04:07:02 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.848505 2011.9395525008238 18.999933 2011-Dec-09 04:07:02 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 22.883333333333326 2011-Dec-09 04:07:02 LOG4 log_alfabeam: ALFABEAM 1 9.709821249919759 22.835236781962376 2011-Dec-09 04:07:02 LOG4 log_alfabeam: ALFABEAM 2 9.716131821558868 22.790590158077659 2011-Dec-09 04:07:02 LOG4 log_alfabeam: ALFABEAM 3 9.722993106775411 22.838223888785464 2011-Dec-09 04:07:02 LOG4 log_alfabeam: ALFABEAM 4 9.723509409675644 22.931617770880933 2011-Dec-09 04:07:02 LOG4 log_alfabeam: ALFABEAM 5 9.717153841198636 22.976336005241002 2011-Dec-09 04:07:02 LOG4 log_alfabeam: ALFABEAM 6 9.710327244225745 22.927589988903893 2011-Dec-09 04:07:02 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134300202 2011-Dec-09 04:07:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-09 04:07:03 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2011-Dec-09 04:07:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:07:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-09 04:07:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:07:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:07:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:07:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2011-Dec-09 04:07:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29224.00 2011-Dec-09 04:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.554 (still bad) 2011-Dec-09 04:07:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:07:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:07:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:07:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:07:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:07:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:07:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:07:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:07:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.539 (still bad) 2011-Dec-09 04:07:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-09 04:07:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.274 1.455 1.244 1.297 2011-Dec-09 04:07:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.524 1.375 1.463 1.538 2011-Dec-09 04:07:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.020 1.529 1.310 1.480 2011-Dec-09 04:07:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.546 0.027 1.344 0.028 2011-Dec-09 04:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.537 (still bad) 2011-Dec-09 04:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.535 (still bad) 2011-Dec-09 04:07:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:07:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-09 04:07:14 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2011-Dec-09 04:07:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-09 04:07:14 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2011-Dec-09 04:07:14 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2011-Dec-09 04:07:14 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2011-Dec-09 04:07:14 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2011-Dec-09 04:07:14 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Dec-09 04:07:14 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.93955 J 2011-Dec-09 04:07:14 LOG2 antvel: Computed apparent RA = 09:43:42.1 Dec = +22:49:29.2 2011-Dec-09 04:07:14 LOG2 antvel: Parameters to Doppler: Topocentric 29234 2011 343 0.0 2011-Dec-09 04:07:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-09 04:07:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2011-Dec-09 04:07:14 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2011-Dec-09 04:07:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:07:14 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:07:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-09 04:07:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:07:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2011-Dec-09 04:07:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-09 04:07:14 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2011-Dec-09 04:07:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2011-Dec-09 04:07:14 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.851848 2011.9395528810808 18.999933 2011-Dec-09 04:07:14 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666660 22.883333333333329 2011-Dec-09 04:07:14 LOG4 log_alfabeam: ALFABEAM 1 9.709826061408869 22.835106351873151 2011-Dec-09 04:07:14 LOG4 log_alfabeam: ALFABEAM 2 9.716141019186596 22.790580475108527 2011-Dec-09 04:07:14 LOG4 log_alfabeam: ALFABEAM 3 9.722997603621611 22.838343535953701 2011-Dec-09 04:07:14 LOG4 log_alfabeam: ALFABEAM 4 9.723504556160846 22.931749034650952 2011-Dec-09 04:07:14 LOG4 log_alfabeam: ALFABEAM 5 9.717144436084075 22.976345679569878 2011-Dec-09 04:07:14 LOG4 log_alfabeam: ALFABEAM 6 9.710322805037636 22.927467315179026 2011-Dec-09 04:07:14 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134300203 2011-Dec-09 04:07:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-09 04:07:15 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2011-Dec-09 04:07:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:07:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-09 04:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.538 (still bad) 2011-Dec-09 04:07:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:07:15 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:07:15 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:07:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2011-Dec-09 04:07:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29236.00 2011-Dec-09 04:07:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:07:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:07:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:07:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:07:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:07:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:07:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:07:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:07:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.537 (still bad) 2011-Dec-09 04:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.508 (still bad) 2011-Dec-09 04:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.522 (still bad) 2011-Dec-09 04:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.507 (still bad) 2011-Dec-09 04:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.508 (still bad) 2011-Dec-09 04:07:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:07:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-09 04:07:26 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2011-Dec-09 04:07:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-09 04:07:26 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2011-Dec-09 04:07:26 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2011-Dec-09 04:07:26 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2011-Dec-09 04:07:26 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2011-Dec-09 04:07:26 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Dec-09 04:07:26 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.93955 J 2011-Dec-09 04:07:26 LOG2 antvel: Computed apparent RA = 09:43:42.1 Dec = +22:49:29.2 2011-Dec-09 04:07:26 LOG2 antvel: Parameters to Doppler: Topocentric 29246 2011 343 0.0 2011-Dec-09 04:07:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-09 04:07:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2011-Dec-09 04:07:26 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2011-Dec-09 04:07:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:07:26 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:07:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-09 04:07:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:07:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2011-Dec-09 04:07:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-09 04:07:26 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2011-Dec-09 04:07:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2011-Dec-09 04:07:26 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.855190 2011.9395532613378 18.999933 2011-Dec-09 04:07:26 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 22.883333333333340 2011-Dec-09 04:07:26 LOG4 log_alfabeam: ALFABEAM 1 9.709830913234271 22.834975276414006 2011-Dec-09 04:07:26 LOG4 log_alfabeam: ALFABEAM 2 9.716150269768956 22.790570913254570 2011-Dec-09 04:07:26 LOG4 log_alfabeam: ALFABEAM 3 9.723002113975836 22.838463946234071 2011-Dec-09 04:07:26 LOG4 log_alfabeam: ALFABEAM 4 9.723499661863958 22.931880947396525 2011-Dec-09 04:07:26 LOG4 log_alfabeam: ALFABEAM 5 9.717134976706822 22.976355225687218 2011-Dec-09 04:07:26 LOG4 log_alfabeam: ALFABEAM 6 9.710318353271116 22.927343861088261 2011-Dec-09 04:07:26 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134300204 2011-Dec-09 04:07:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-09 04:07:27 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2011-Dec-09 04:07:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:07:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-09 04:07:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:07:27 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:07:27 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.508 (still bad) 2011-Dec-09 04:07:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2011-Dec-09 04:07:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29248.00 2011-Dec-09 04:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.508 (still bad) 2011-Dec-09 04:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.505 (still bad) 2011-Dec-09 04:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.501 (still bad) 2011-Dec-09 04:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.505 (still bad) 2011-Dec-09 04:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.506 (still bad) 2011-Dec-09 04:07:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:07:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-09 04:07:38 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2011-Dec-09 04:07:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-09 04:07:38 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2011-Dec-09 04:07:38 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2011-Dec-09 04:07:38 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2011-Dec-09 04:07:38 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2011-Dec-09 04:07:38 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Dec-09 04:07:38 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.93955 J 2011-Dec-09 04:07:38 LOG2 antvel: Computed apparent RA = 09:43:42.1 Dec = +22:49:29.2 2011-Dec-09 04:07:38 LOG2 antvel: Parameters to Doppler: Topocentric 29258 2011 343 0.0 2011-Dec-09 04:07:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-09 04:07:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2011-Dec-09 04:07:38 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2011-Dec-09 04:07:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:07:38 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:07:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-09 04:07:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:07:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2011-Dec-09 04:07:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-09 04:07:38 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2011-Dec-09 04:07:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2011-Dec-09 04:07:38 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.858533 2011.939553641595 18.999933 2011-Dec-09 04:07:38 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 22.883333333333344 2011-Dec-09 04:07:38 LOG4 log_alfabeam: ALFABEAM 1 9.709835808805215 22.834843471486668 2011-Dec-09 04:07:38 LOG4 log_alfabeam: ALFABEAM 2 9.716159579375255 22.790561469405947 2011-Dec-09 04:07:38 LOG4 log_alfabeam: ALFABEAM 3 9.723006640575205 22.838585199961880 2011-Dec-09 04:07:38 LOG4 log_alfabeam: ALFABEAM 4 9.723494723344418 22.932013593732023 2011-Dec-09 04:07:38 LOG4 log_alfabeam: ALFABEAM 5 9.717125456860643 22.976364646552902 2011-Dec-09 04:07:38 LOG4 log_alfabeam: ALFABEAM 6 9.710313886238703 22.927219544336641 2011-Dec-09 04:07:38 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134300205 2011-Dec-09 04:07:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-09 04:07:39 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2011-Dec-09 04:07:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:07:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-09 04:07:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:07:39 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:07:39 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:07:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2011-Dec-09 04:07:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29260.00 2011-Dec-09 04:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.507 (still bad) 2011-Dec-09 04:07:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:07:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:07:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:07:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:07:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:07:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:07:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:07:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:07:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.504 (still bad) 2011-Dec-09 04:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.508 (still bad) 2011-Dec-09 04:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.513 (still bad) 2011-Dec-09 04:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.508 (still bad) 2011-Dec-09 04:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.508 (still bad) 2011-Dec-09 04:07:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:07:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-09 04:07:50 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2011-Dec-09 04:07:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-09 04:07:50 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2011-Dec-09 04:07:50 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2011-Dec-09 04:07:50 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2011-Dec-09 04:07:50 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2011-Dec-09 04:07:50 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-09 04:07:50 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-09 04:07:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-09 04:07:50 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2011-Dec-09 04:07:50 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-09 04:07:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-09 04:07:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-09 04:07:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-09 04:07:50 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2011-Dec-09 04:07:50 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2011-Dec-09 04:07:50 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2011-Dec-09 04:07:50 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-09 04:07:50 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2011-Dec-09 04:07:50 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Dec-09 04:07:50 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.93955 J 2011-Dec-09 04:07:50 LOG2 antvel: Computed apparent RA = 09:43:42.1 Dec = +22:49:29.2 2011-Dec-09 04:07:50 LOG2 antvel: Parameters to Doppler: Topocentric 29270 2011 343 0.0 2011-Dec-09 04:07:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-09 04:07:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2011-Dec-09 04:07:50 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2011-Dec-09 04:07:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:07:50 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:07:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-09 04:07:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:07:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2011-Dec-09 04:07:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-09 04:07:50 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2011-Dec-09 04:07:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-09 04:07:50 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.861875 2011.939554021852 18.999933 2011-Dec-09 04:07:50 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 22.883333333333333 2011-Dec-09 04:07:50 LOG4 log_alfabeam: ALFABEAM 1 9.709840745705913 22.834711010238205 2011-Dec-09 04:07:50 LOG4 log_alfabeam: ALFABEAM 2 9.716168942975271 22.790552151877389 2011-Dec-09 04:07:50 LOG4 log_alfabeam: ALFABEAM 3 9.723011180748367 22.838707232975484 2011-Dec-09 04:07:50 LOG4 log_alfabeam: ALFABEAM 4 9.723489743037707 22.932146900021920 2011-Dec-09 04:07:50 LOG4 log_alfabeam: ALFABEAM 5 9.717115881689413 22.976373933722748 2011-Dec-09 04:07:50 LOG4 log_alfabeam: ALFABEAM 6 9.710309406590959 22.927094430779455 2011-Dec-09 04:07:50 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134300206 2011-Dec-09 04:07:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-09 04:07:51 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2011-Dec-09 04:07:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:07:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-09 04:07:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:07:51 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:07:51 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:07:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Dec-09 04:07:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29272.00 2011-Dec-09 04:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.507 (still bad) 2011-Dec-09 04:07:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:07:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:07:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:07:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:07:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:07:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:07:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:07:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:07:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.493 (still bad) 2011-Dec-09 04:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2011-Dec-09 04:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.107 (still bad) 2011-Dec-09 04:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.103 (still bad) 2011-Dec-09 04:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.104 (still bad) 2011-Dec-09 04:08:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:08:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-09 04:08:02 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2011-Dec-09 04:08:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-09 04:08:02 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2011-Dec-09 04:08:02 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2011-Dec-09 04:08:02 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-09 04:08:02 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2011-Dec-09 04:08:02 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Dec-09 04:08:02 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.93955 J 2011-Dec-09 04:08:02 LOG2 antvel: Computed apparent RA = 09:43:42.1 Dec = +22:49:29.2 2011-Dec-09 04:08:02 LOG2 antvel: Parameters to Doppler: Topocentric 29282 2011 343 0.0 2011-Dec-09 04:08:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-09 04:08:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2011-Dec-09 04:08:02 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2011-Dec-09 04:08:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:08:02 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:08:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-09 04:08:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:08:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2011-Dec-09 04:08:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-09 04:08:02 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2011-Dec-09 04:08:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-09 04:08:02 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.865218 2011.939554402109 18.999933 2011-Dec-09 04:08:02 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666670 22.883333333333344 2011-Dec-09 04:08:02 LOG4 log_alfabeam: ALFABEAM 1 9.709845727411816 22.834577807635299 2011-Dec-09 04:08:02 LOG4 log_alfabeam: ALFABEAM 2 9.716178366718607 22.790542957813443 2011-Dec-09 04:08:02 LOG4 log_alfabeam: ALFABEAM 3 9.723015737247932 22.838830126796886 2011-Dec-09 04:08:02 LOG4 log_alfabeam: ALFABEAM 4 9.723484717436353 22.932280951819877 2011-Dec-09 04:08:02 LOG4 log_alfabeam: ALFABEAM 5 9.717106244904780 22.976383089887985 2011-Dec-09 04:08:02 LOG4 log_alfabeam: ALFABEAM 6 9.710304911626610 22.926968436911334 2011-Dec-09 04:08:02 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134300207 2011-Dec-09 04:08:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-09 04:08:03 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2011-Dec-09 04:08:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:08:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-09 04:08:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:08:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:08:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:08:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Dec-09 04:08:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29284.00 2011-Dec-09 04:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.106 (still bad) 2011-Dec-09 04:08:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:08:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:08:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:08:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:08:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:08:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:08:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:08:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:08:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.137 (still bad) 2011-Dec-09 04:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.147 (still bad) 2011-Dec-09 04:08:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-09 04:08:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 1.089 0.934 0.996 2011-Dec-09 04:08:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.120 1.005 1.077 1.138 2011-Dec-09 04:08:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.828 1.098 0.957 1.102 2011-Dec-09 04:08:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 0.024 0.965 0.026 2011-Dec-09 04:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-09 04:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.141 (still bad) 2011-Dec-09 04:08:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:08:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-09 04:08:14 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2011-Dec-09 04:08:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-09 04:08:14 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2011-Dec-09 04:08:14 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2011-Dec-09 04:08:14 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-09 04:08:14 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2011-Dec-09 04:08:14 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Dec-09 04:08:14 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.93955 J 2011-Dec-09 04:08:14 LOG2 antvel: Computed apparent RA = 09:43:42.1 Dec = +22:49:29.2 2011-Dec-09 04:08:14 LOG2 antvel: Parameters to Doppler: Topocentric 29294 2011 343 0.0 2011-Dec-09 04:08:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-09 04:08:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2011-Dec-09 04:08:14 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2011-Dec-09 04:08:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:08:14 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:08:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-09 04:08:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:08:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2011-Dec-09 04:08:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-09 04:08:14 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2011-Dec-09 04:08:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-09 04:08:14 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.868560 2011.939554782366 18.999933 2011-Dec-09 04:08:14 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 22.883333333333333 2011-Dec-09 04:08:14 LOG4 log_alfabeam: ALFABEAM 1 9.709850751471130 22.834443937554543 2011-Dec-09 04:08:14 LOG4 log_alfabeam: ALFABEAM 2 9.716187845519546 22.790533895489887 2011-Dec-09 04:08:14 LOG4 log_alfabeam: ALFABEAM 3 9.723020307382171 22.838953816501792 2011-Dec-09 04:08:14 LOG4 log_alfabeam: ALFABEAM 4 9.723479649012225 22.932415674755635 2011-Dec-09 04:08:14 LOG4 log_alfabeam: ALFABEAM 5 9.717096551707568 22.976392106646681 2011-Dec-09 04:08:14 LOG4 log_alfabeam: ALFABEAM 6 9.710300404015896 22.926841629370440 2011-Dec-09 04:08:14 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134300208 2011-Dec-09 04:08:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-09 04:08:15 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2011-Dec-09 04:08:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:08:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-09 04:08:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:08:15 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:08:15 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:08:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Dec-09 04:08:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29296.00 2011-Dec-09 04:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.141 (still bad) 2011-Dec-09 04:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-09 04:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.144 (still bad) 2011-Dec-09 04:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-09 04:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.132 (still bad) 2011-Dec-09 04:08:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:08:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-09 04:08:26 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2011-Dec-09 04:08:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-09 04:08:26 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2011-Dec-09 04:08:26 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2011-Dec-09 04:08:26 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-09 04:08:26 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2011-Dec-09 04:08:26 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Dec-09 04:08:26 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.93956 J 2011-Dec-09 04:08:26 LOG2 antvel: Computed apparent RA = 09:43:42.1 Dec = +22:49:29.2 2011-Dec-09 04:08:26 LOG2 antvel: Parameters to Doppler: Topocentric 29306 2011 343 0.0 2011-Dec-09 04:08:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-09 04:08:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2011-Dec-09 04:08:26 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2011-Dec-09 04:08:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:08:26 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:08:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-09 04:08:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:08:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2011-Dec-09 04:08:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-09 04:08:26 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2011-Dec-09 04:08:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-09 04:08:26 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.871903 2011.9395551626233 18.999933 2011-Dec-09 04:08:26 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 22.883333333333344 2011-Dec-09 04:08:26 LOG4 log_alfabeam: ALFABEAM 1 9.709855821427285 22.834309314012135 2011-Dec-09 04:08:26 LOG4 log_alfabeam: ALFABEAM 2 9.716197385609579 22.790524962316880 2011-Dec-09 04:08:26 LOG4 log_alfabeam: ALFABEAM 3 9.723024893919066 22.839078384825758 2011-Dec-09 04:08:26 LOG4 log_alfabeam: ALFABEAM 4 9.723474534189119 22.932551155337681 2011-Dec-09 04:08:26 LOG4 log_alfabeam: ALFABEAM 5 9.717086795725608 22.976400986409676 2011-Dec-09 04:08:26 LOG4 log_alfabeam: ALFABEAM 6 9.710295881043903 22.926713923413860 2011-Dec-09 04:08:26 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134300209 2011-Dec-09 04:08:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-09 04:08:27 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2011-Dec-09 04:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-09 04:08:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:08:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-09 04:08:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:08:27 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:08:27 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:08:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2011-Dec-09 04:08:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29308.00 2011-Dec-09 04:08:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:08:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:08:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:08:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:08:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:08:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:08:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:08:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-09 04:08:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.133 (still bad) 2011-Dec-09 04:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2011-Dec-09 04:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2011-Dec-09 04:08:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:08:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-09 04:08:38 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2011-Dec-09 04:08:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-09 04:08:38 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2011-Dec-09 04:08:38 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2011-Dec-09 04:08:38 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-09 04:08:38 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2011-Dec-09 04:08:38 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Dec-09 04:08:38 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.93956 J 2011-Dec-09 04:08:38 LOG2 antvel: Computed apparent RA = 09:43:42.1 Dec = +22:49:29.2 2011-Dec-09 04:08:38 LOG2 antvel: Parameters to Doppler: Topocentric 29318 2011 343 0.0 2011-Dec-09 04:08:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-09 04:08:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2011-Dec-09 04:08:38 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2011-Dec-09 04:08:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:08:38 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:08:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-09 04:08:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:08:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2011-Dec-09 04:08:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-09 04:08:38 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2011-Dec-09 04:08:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-09 04:08:38 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.875245 2011.9395555428803 18.999933 2011-Dec-09 04:08:38 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 22.883333333333340 2011-Dec-09 04:08:38 LOG4 log_alfabeam: ALFABEAM 1 9.709860934791767 22.834174011626601 2011-Dec-09 04:08:38 LOG4 log_alfabeam: ALFABEAM 2 9.716206981846510 22.790516166529418 2011-Dec-09 04:08:38 LOG4 log_alfabeam: ALFABEAM 3 9.723029494146251 22.839203766067929 2011-Dec-09 04:08:38 LOG4 log_alfabeam: ALFABEAM 4 9.723469375476014 22.932687318448636 2011-Dec-09 04:08:38 LOG4 log_alfabeam: ALFABEAM 5 9.717076982217700 22.976409720819237 2011-Dec-09 04:08:38 LOG4 log_alfabeam: ALFABEAM 6 9.710291345400837 22.926585386477047 2011-Dec-09 04:08:38 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134300210 2011-Dec-09 04:08:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-09 04:08:39 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2011-Dec-09 04:08:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:08:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-09 04:08:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:08:39 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:08:39 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2011-Dec-09 04:08:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2011-Dec-09 04:08:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29320.00 2011-Dec-09 04:08:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:08:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:08:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:08:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:08:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:08:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:08:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:08:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:08:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2011-Dec-09 04:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.103 (still bad) 2011-Dec-09 04:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2011-Dec-09 04:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.103 (still bad) 2011-Dec-09 04:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.101 (still bad) 2011-Dec-09 04:08:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:08:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-09 04:08:50 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2011-Dec-09 04:08:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-09 04:08:50 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2011-Dec-09 04:08:50 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2011-Dec-09 04:08:50 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-09 04:08:50 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2011-Dec-09 04:08:50 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Dec-09 04:08:50 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.93956 J 2011-Dec-09 04:08:50 LOG2 antvel: Computed apparent RA = 09:43:42.1 Dec = +22:49:29.2 2011-Dec-09 04:08:50 LOG2 antvel: Parameters to Doppler: Topocentric 29330 2011 343 0.0 2011-Dec-09 04:08:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-09 04:08:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2011-Dec-09 04:08:50 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2011-Dec-09 04:08:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:08:50 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:08:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-09 04:08:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:08:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2011-Dec-09 04:08:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-09 04:08:50 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2011-Dec-09 04:08:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-09 04:08:50 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.878587 2011.9395559231373 18.999933 2011-Dec-09 04:08:50 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666663 22.883333333333347 2011-Dec-09 04:08:50 LOG4 log_alfabeam: ALFABEAM 1 9.709866093627300 22.834037984259382 2011-Dec-09 04:08:50 LOG4 log_alfabeam: ALFABEAM 2 9.716216637647191 22.790507508384920 2011-Dec-09 04:08:50 LOG4 log_alfabeam: ALFABEAM 3 9.723034109463653 22.839330006301505 2011-Dec-09 04:08:50 LOG4 log_alfabeam: ALFABEAM 4 9.723464170790402 22.932824210496587 2011-Dec-09 04:08:50 LOG4 log_alfabeam: ALFABEAM 5 9.717067107689989 22.976418309445606 2011-Dec-09 04:08:50 LOG4 log_alfabeam: ALFABEAM 6 9.710286795721796 22.926455971407858 2011-Dec-09 04:08:50 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134300211 2011-Dec-09 04:08:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-09 04:08:51 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2011-Dec-09 04:08:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:08:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-09 04:08:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:08:51 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:08:51 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:08:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2011-Dec-09 04:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.104 (still bad) 2011-Dec-09 04:08:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29332.00 2011-Dec-09 04:08:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:08:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:08:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:08:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:08:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:08:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:08:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:08:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:08:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.104 (still bad) 2011-Dec-09 04:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2011-Dec-09 04:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2011-Dec-09 04:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.097 (still bad) 2011-Dec-09 04:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.096 (still bad) 2011-Dec-09 04:09:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:09:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-09 04:09:02 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2011-Dec-09 04:09:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-09 04:09:02 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2011-Dec-09 04:09:02 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2011-Dec-09 04:09:02 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-09 04:09:02 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2011-Dec-09 04:09:02 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Dec-09 04:09:02 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.93956 J 2011-Dec-09 04:09:02 LOG2 antvel: Computed apparent RA = 09:43:42.1 Dec = +22:49:29.2 2011-Dec-09 04:09:02 LOG2 antvel: Parameters to Doppler: Topocentric 29342 2011 343 0.0 2011-Dec-09 04:09:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-09 04:09:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2011-Dec-09 04:09:02 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2011-Dec-09 04:09:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:09:02 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:09:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-09 04:09:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:09:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2011-Dec-09 04:09:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-09 04:09:02 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2011-Dec-09 04:09:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-09 04:09:02 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.881930 2011.9395563033943 18.999933 2011-Dec-09 04:09:02 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 22.883333333333326 2011-Dec-09 04:09:02 LOG4 log_alfabeam: ALFABEAM 1 9.709871300059429 22.833901184849072 2011-Dec-09 04:09:02 LOG4 log_alfabeam: ALFABEAM 2 9.716226356506567 22.790498988366327 2011-Dec-09 04:09:02 LOG4 log_alfabeam: ALFABEAM 3 9.723038741287784 22.839457152744739 2011-Dec-09 04:09:02 LOG4 log_alfabeam: ALFABEAM 4 9.723458917986246 22.932961878816851 2011-Dec-09 04:09:02 LOG4 log_alfabeam: ALFABEAM 5 9.717057168568687 22.976426751620583 2011-Dec-09 04:09:02 LOG4 log_alfabeam: ALFABEAM 6 9.710282230626813 22.926325629885202 2011-Dec-09 04:09:02 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134300212 2011-Dec-09 04:09:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-09 04:09:03 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2011-Dec-09 04:09:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:09:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-09 04:09:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:09:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:09:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:09:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2011-Dec-09 04:09:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29344.00 2011-Dec-09 04:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.097 (still bad) 2011-Dec-09 04:09:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:09:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:09:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:09:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:09:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:09:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:09:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:09:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:09:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.092 (still bad) 2011-Dec-09 04:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.094 (still bad) 2011-Dec-09 04:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.092 (still bad) 2011-Dec-09 04:09:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-09 04:09:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.878 1.034 0.907 0.950 2011-Dec-09 04:09:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 0.973 1.003 1.090 2011-Dec-09 04:09:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.788 1.060 0.889 1.054 2011-Dec-09 04:09:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.021 0.928 0.021 2011-Dec-09 04:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.094 (still bad) 2011-Dec-09 04:09:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:09:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-09 04:09:14 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2011-Dec-09 04:09:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-09 04:09:14 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2011-Dec-09 04:09:14 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2011-Dec-09 04:09:14 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-09 04:09:14 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-09 04:09:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-09 04:09:14 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2011-Dec-09 04:09:14 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-09 04:09:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-09 04:09:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-09 04:09:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-09 04:09:14 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2011-Dec-09 04:09:14 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2011-Dec-09 04:09:14 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2011-Dec-09 04:09:14 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2011-Dec-09 04:09:14 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Dec-09 04:09:14 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.93956 J 2011-Dec-09 04:09:14 LOG2 antvel: Computed apparent RA = 09:43:42.1 Dec = +22:49:29.2 2011-Dec-09 04:09:14 LOG2 antvel: Parameters to Doppler: Topocentric 29354 2011 343 0.0 2011-Dec-09 04:09:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-09 04:09:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2011-Dec-09 04:09:14 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2011-Dec-09 04:09:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:09:14 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:09:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-09 04:09:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:09:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2011-Dec-09 04:09:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-09 04:09:14 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2011-Dec-09 04:09:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2011-Dec-09 04:09:14 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.885272 2011.9395566836513 18.999933 2011-Dec-09 04:09:14 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 22.883333333333344 2011-Dec-09 04:09:14 LOG4 log_alfabeam: ALFABEAM 1 9.709876551543209 22.833763689150679 2011-Dec-09 04:09:14 LOG4 log_alfabeam: ALFABEAM 2 9.716236133195821 22.790490614644067 2011-Dec-09 04:09:14 LOG4 log_alfabeam: ALFABEAM 3 9.723043386874785 22.839585138505104 2011-Dec-09 04:09:14 LOG4 log_alfabeam: ALFABEAM 4 9.723453619629611 22.933100247147820 2011-Dec-09 04:09:14 LOG4 log_alfabeam: ALFABEAM 5 9.717047170201496 22.976435039056547 2011-Dec-09 04:09:14 LOG4 log_alfabeam: ALFABEAM 6 9.710277652836547 22.926194430568142 2011-Dec-09 04:09:14 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134300213 2011-Dec-09 04:09:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-09 04:09:15 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2011-Dec-09 04:09:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:09:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Dec-09 04:09:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:09:15 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:09:15 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:09:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2011-Dec-09 04:09:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29356.00 2011-Dec-09 04:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.094 (still bad) 2011-Dec-09 04:09:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:09:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:09:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:09:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:09:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:09:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:09:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:09:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:09:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.500 (still bad) 2011-Dec-09 04:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.515 (still bad) 2011-Dec-09 04:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.504 (still bad) 2011-Dec-09 04:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.497 (still bad) 2011-Dec-09 04:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.500 (still bad) 2011-Dec-09 04:09:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:09:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-09 04:09:26 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2011-Dec-09 04:09:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-09 04:09:26 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2011-Dec-09 04:09:26 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2011-Dec-09 04:09:26 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2011-Dec-09 04:09:26 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2011-Dec-09 04:09:26 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Dec-09 04:09:26 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.93956 J 2011-Dec-09 04:09:26 LOG2 antvel: Computed apparent RA = 09:43:42.1 Dec = +22:49:29.2 2011-Dec-09 04:09:26 LOG2 antvel: Parameters to Doppler: Topocentric 29366 2011 343 0.0 2011-Dec-09 04:09:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-09 04:09:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2011-Dec-09 04:09:26 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2011-Dec-09 04:09:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:09:26 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:09:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-09 04:09:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:09:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2011-Dec-09 04:09:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-09 04:09:26 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2011-Dec-09 04:09:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2011-Dec-09 04:09:26 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.888615 2011.9395570639085 18.999933 2011-Dec-09 04:09:26 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 22.883333333333333 2011-Dec-09 04:09:26 LOG4 log_alfabeam: ALFABEAM 1 9.709881851800141 22.833625408735067 2011-Dec-09 04:09:26 LOG4 log_alfabeam: ALFABEAM 2 9.716245974158612 22.790482385344845 2011-Dec-09 04:09:26 LOG4 log_alfabeam: ALFABEAM 3 9.723048049030398 22.839714049473788 2011-Dec-09 04:09:26 LOG4 log_alfabeam: ALFABEAM 4 9.723448271964171 22.933239404453666 2011-Dec-09 04:09:26 LOG4 log_alfabeam: ALFABEAM 5 9.717037105999122 22.976443173407969 2011-Dec-09 04:09:26 LOG4 log_alfabeam: ALFABEAM 6 9.710273059602841 22.926062285496403 2011-Dec-09 04:09:26 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134300214 2011-Dec-09 04:09:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-09 04:09:27 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2011-Dec-09 04:09:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:09:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Dec-09 04:09:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:09:27 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:09:27 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:09:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2011-Dec-09 04:09:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29368.00 2011-Dec-09 04:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.500 (still bad) 2011-Dec-09 04:09:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:09:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:09:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:09:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:09:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:09:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:09:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:09:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:09:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.548 (still bad) 2011-Dec-09 04:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.556 (still bad) 2011-Dec-09 04:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.546 (still bad) 2011-Dec-09 04:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.545 (still bad) 2011-Dec-09 04:09:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:09:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-09 04:09:38 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2011-Dec-09 04:09:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-09 04:09:38 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2011-Dec-09 04:09:38 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2011-Dec-09 04:09:38 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2011-Dec-09 04:09:38 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2011-Dec-09 04:09:38 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Dec-09 04:09:38 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.93956 J 2011-Dec-09 04:09:38 LOG2 antvel: Computed apparent RA = 09:43:42.1 Dec = +22:49:29.2 2011-Dec-09 04:09:38 LOG2 antvel: Parameters to Doppler: Topocentric 29378 2011 343 0.0 2011-Dec-09 04:09:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-09 04:09:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2011-Dec-09 04:09:38 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2011-Dec-09 04:09:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:09:38 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:09:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-09 04:09:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:09:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2011-Dec-09 04:09:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-09 04:09:38 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2011-Dec-09 04:09:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2011-Dec-09 04:09:38 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.891957 2011.9395574441655 18.999933 2011-Dec-09 04:09:38 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 22.883333333333333 2011-Dec-09 04:09:38 LOG4 log_alfabeam: ALFABEAM 1 9.709887198246690 22.833486420131134 2011-Dec-09 04:09:38 LOG4 log_alfabeam: ALFABEAM 2 9.716255874107095 22.790474308593613 2011-Dec-09 04:09:38 LOG4 log_alfabeam: ALFABEAM 3 9.723052724989383 22.839843817945209 2011-Dec-09 04:09:38 LOG4 log_alfabeam: ALFABEAM 4 9.723442877595012 22.933379273693454 2011-Dec-09 04:09:38 LOG4 log_alfabeam: ALFABEAM 5 9.717026981369873 22.976451146436464 2011-Dec-09 04:09:38 LOG4 log_alfabeam: ALFABEAM 6 9.710268453667000 22.925929264163770 2011-Dec-09 04:09:38 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134300215 2011-Dec-09 04:09:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-09 04:09:39 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2011-Dec-09 04:09:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:09:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Dec-09 04:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.547 (still bad) 2011-Dec-09 04:09:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:09:39 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:09:39 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:09:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2011-Dec-09 04:09:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29380.00 2011-Dec-09 04:09:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:09:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:09:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:09:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:09:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:09:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:09:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:09:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:09:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.547 (still bad) 2011-Dec-09 04:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.542 (still bad) 2011-Dec-09 04:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.549 (still bad) 2011-Dec-09 04:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.544 (still bad) 2011-Dec-09 04:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.543 (still bad) 2011-Dec-09 04:09:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:09:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-09 04:09:50 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2011-Dec-09 04:09:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-09 04:09:50 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2011-Dec-09 04:09:50 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2011-Dec-09 04:09:50 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2011-Dec-09 04:09:50 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2011-Dec-09 04:09:50 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Dec-09 04:09:50 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.93956 J 2011-Dec-09 04:09:50 LOG2 antvel: Computed apparent RA = 09:43:42.1 Dec = +22:49:29.2 2011-Dec-09 04:09:50 LOG2 antvel: Parameters to Doppler: Topocentric 29390 2011 343 0.0 2011-Dec-09 04:09:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-09 04:09:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2011-Dec-09 04:09:50 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2011-Dec-09 04:09:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:09:50 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:09:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-09 04:09:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:09:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2011-Dec-09 04:09:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-09 04:09:50 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2011-Dec-09 04:09:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2011-Dec-09 04:09:50 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.895300 2011.9395578244225 18.999933 2011-Dec-09 04:09:50 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 22.883333333333329 2011-Dec-09 04:09:50 LOG4 log_alfabeam: ALFABEAM 1 9.709892594679053 22.833346633903400 2011-Dec-09 04:09:50 LOG4 log_alfabeam: ALFABEAM 2 9.716265839572872 22.790466382826146 2011-Dec-09 04:09:50 LOG4 log_alfabeam: ALFABEAM 3 9.723057417572310 22.839974531123801 2011-Dec-09 04:09:50 LOG4 log_alfabeam: ALFABEAM 4 9.723437432690272 22.933519944841940 2011-Dec-09 04:09:50 LOG4 log_alfabeam: ALFABEAM 5 9.717016789634455 22.976458959470502 2011-Dec-09 04:09:50 LOG4 log_alfabeam: ALFABEAM 6 9.710263832267975 22.925795277271575 2011-Dec-09 04:09:50 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134300216 2011-Dec-09 04:09:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-09 04:09:51 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2011-Dec-09 04:09:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:09:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Dec-09 04:09:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:09:51 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:09:51 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.545 (still bad) 2011-Dec-09 04:09:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2011-Dec-09 04:09:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29392.00 2011-Dec-09 04:09:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:09:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:09:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:09:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:09:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:09:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:09:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:09:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:09:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.543 (still bad) 2011-Dec-09 04:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.529 (still bad) 2011-Dec-09 04:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.538 (still bad) 2011-Dec-09 04:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.530 (still bad) 2011-Dec-09 04:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.528 (still bad) 2011-Dec-09 04:10:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:10:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-09 04:10:02 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2011-Dec-09 04:10:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-09 04:10:02 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2011-Dec-09 04:10:02 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2011-Dec-09 04:10:02 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2011-Dec-09 04:10:02 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2011-Dec-09 04:10:02 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Dec-09 04:10:02 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.93956 J 2011-Dec-09 04:10:02 LOG2 antvel: Computed apparent RA = 09:43:42.1 Dec = +22:49:29.2 2011-Dec-09 04:10:02 LOG2 antvel: Parameters to Doppler: Topocentric 29402 2011 343 0.0 2011-Dec-09 04:10:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-09 04:10:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2011-Dec-09 04:10:02 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2011-Dec-09 04:10:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:10:02 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:10:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-09 04:10:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:10:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2011-Dec-09 04:10:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-09 04:10:02 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2011-Dec-09 04:10:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2011-Dec-09 04:10:02 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.898642 2011.9395582046795 18.999933 2011-Dec-09 04:10:02 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666670 22.883333333333333 2011-Dec-09 04:10:02 LOG4 log_alfabeam: ALFABEAM 1 9.709898038474316 22.833206127367966 2011-Dec-09 04:10:02 LOG4 log_alfabeam: ALFABEAM 2 9.716275865207976 22.790458616119928 2011-Dec-09 04:10:02 LOG4 log_alfabeam: ALFABEAM 3 9.723062123992237 22.840106120475763 2011-Dec-09 04:10:02 LOG4 log_alfabeam: ALFABEAM 4 9.723431939894830 22.933661340065512 2011-Dec-09 04:10:02 LOG4 log_alfabeam: ALFABEAM 5 9.717006536262877 22.976466604323033 2011-Dec-09 04:10:02 LOG4 log_alfabeam: ALFABEAM 6 9.710259198168020 22.925660395163895 2011-Dec-09 04:10:02 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134300217 2011-Dec-09 04:10:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-09 04:10:03 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2011-Dec-09 04:10:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:10:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Dec-09 04:10:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:10:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:10:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:10:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2011-Dec-09 04:10:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29404.00 2011-Dec-09 04:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.532 (still bad) 2011-Dec-09 04:10:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:10:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:10:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:10:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:10:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:10:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:10:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:10:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:10:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.510 (still bad) 2011-Dec-09 04:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.507 (still bad) 2011-Dec-09 04:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.516 (still bad) 2011-Dec-09 04:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.507 (still bad) 2011-Dec-09 04:10:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-09 04:10:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.229 1.408 1.216 1.272 2011-Dec-09 04:10:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.506 1.349 1.404 1.501 2011-Dec-09 04:10:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.987 1.490 1.255 1.433 2011-Dec-09 04:10:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.498 0.022 1.305 0.022 2011-Dec-09 04:10:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:10:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-09 04:10:14 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2011-Dec-09 04:10:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-09 04:10:14 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2011-Dec-09 04:10:14 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2011-Dec-09 04:10:14 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2011-Dec-09 04:10:14 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2011-Dec-09 04:10:14 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Dec-09 04:10:14 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.93956 J 2011-Dec-09 04:10:14 LOG2 antvel: Computed apparent RA = 09:43:42.1 Dec = +22:49:29.2 2011-Dec-09 04:10:14 LOG2 antvel: Parameters to Doppler: Topocentric 29414 2011 343 0.0 2011-Dec-09 04:10:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-09 04:10:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2011-Dec-09 04:10:14 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2011-Dec-09 04:10:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:10:14 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:10:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-09 04:10:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:10:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2011-Dec-09 04:10:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-09 04:10:14 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2011-Dec-09 04:10:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2011-Dec-09 04:10:14 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.901985 2011.9395585849365 18.999933 2011-Dec-09 04:10:14 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 22.883333333333340 2011-Dec-09 04:10:14 LOG4 log_alfabeam: ALFABEAM 1 9.709903533505425 22.833064810066503 2011-Dec-09 04:10:14 LOG4 log_alfabeam: ALFABEAM 2 9.716285957633801 22.790451007233422 2011-Dec-09 04:10:14 LOG4 log_alfabeam: ALFABEAM 3 9.723066847084349 22.840238674549024 2011-Dec-09 04:10:14 LOG4 log_alfabeam: ALFABEAM 4 9.723426395299233 22.933803550365898 2011-Dec-09 04:10:14 LOG4 log_alfabeam: ALFABEAM 5 9.716996214484009 22.976474081982133 2011-Dec-09 04:10:14 LOG4 log_alfabeam: ALFABEAM 6 9.710254548593452 22.925524527173121 2011-Dec-09 04:10:14 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134300218 2011-Dec-09 04:10:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-09 04:10:15 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2011-Dec-09 04:10:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:10:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Dec-09 04:10:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:10:15 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:10:15 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:10:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2011-Dec-09 04:10:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29416.00 2011-Dec-09 04:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.506 (still bad) 2011-Dec-09 04:10:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:10:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:10:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:10:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:10:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:10:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:10:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:10:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:10:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.504 (still bad) 2011-Dec-09 04:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.506 (still bad) 2011-Dec-09 04:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.512 (still bad) 2011-Dec-09 04:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.506 (still bad) 2011-Dec-09 04:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.504 (still bad) 2011-Dec-09 04:10:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:10:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-09 04:10:26 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2011-Dec-09 04:10:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-09 04:10:26 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2011-Dec-09 04:10:26 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2011-Dec-09 04:10:26 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2011-Dec-09 04:10:26 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2011-Dec-09 04:10:26 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Dec-09 04:10:26 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.93956 J 2011-Dec-09 04:10:26 LOG2 antvel: Computed apparent RA = 09:43:42.1 Dec = +22:49:29.2 2011-Dec-09 04:10:26 LOG2 antvel: Parameters to Doppler: Topocentric 29426 2011 343 0.0 2011-Dec-09 04:10:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-09 04:10:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2011-Dec-09 04:10:26 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2011-Dec-09 04:10:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:10:26 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:10:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-09 04:10:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:10:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2011-Dec-09 04:10:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Dec-09 04:10:26 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2011-Dec-09 04:10:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2011-Dec-09 04:10:26 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.905327 2011.9395589651938 18.999933 2011-Dec-09 04:10:26 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 22.883333333333351 2011-Dec-09 04:10:26 LOG4 log_alfabeam: ALFABEAM 1 9.709909077109307 22.832922760115927 2011-Dec-09 04:10:26 LOG4 log_alfabeam: ALFABEAM 2 9.716296111441167 22.790443564194636 2011-Dec-09 04:10:26 LOG4 log_alfabeam: ALFABEAM 3 9.723071584039722 22.840372123965977 2011-Dec-09 04:10:26 LOG4 log_alfabeam: ALFABEAM 4 9.723420801588953 22.933946497103076 2011-Dec-09 04:10:26 LOG4 log_alfabeam: ALFABEAM 5 9.716985829830687 22.976481384314280 2011-Dec-09 04:10:26 LOG4 log_alfabeam: ALFABEAM 6 9.710249886327757 22.925387744509589 2011-Dec-09 04:10:26 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 134300219 2011-Dec-09 04:10:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Dec-09 04:10:27 LOG5 begin_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2011-Dec-09 04:10:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:10:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Dec-09 04:10:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:10:27 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:10:27 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:10:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2011-Dec-09 04:10:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29428.00 2011-Dec-09 04:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.507 (still bad) 2011-Dec-09 04:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.507 (still bad) 2011-Dec-09 04:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.510 (still bad) 2011-Dec-09 04:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.510 (still bad) 2011-Dec-09 04:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.502 (still bad) 2011-Dec-09 04:10:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:10:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Dec-09 04:10:38 LOG5 end_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2011-Dec-09 04:10:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Dec-09 04:10:38 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2011-Dec-09 04:10:38 INFO2 smartfreq: Switching off CAL 2011-Dec-09 04:10:38 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-09 04:10:38 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-09 04:10:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-09 04:10:38 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2011-Dec-09 04:10:38 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-09 04:10:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-09 04:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.506 (still bad) 2011-Dec-09 04:10:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-09 04:10:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-09 04:10:38 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2011-Dec-09 04:10:38 INFO3 restore_frequencies: Restoring original frequencies 2011-Dec-09 04:10:38 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Dec-09 04:10:38 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.93956 J 2011-Dec-09 04:10:38 LOG2 antvel: Computed apparent RA = 09:43:42.1 Dec = +22:49:29.2 2011-Dec-09 04:10:38 LOG2 antvel: Parameters to Doppler: Topocentric 29438 2011 343 0.0 2011-Dec-09 04:10:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-09 04:10:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2011-Dec-09 04:10:38 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2011-Dec-09 04:10:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:10:38 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:10:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2011-Dec-09 04:10:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:10:38 STOP finish_task: Finishing task 'smart frequency switching' 2011-Dec-09 04:10:38 LOG5 finish_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2011-Dec-09 04:10:38 DONE finish_task: DONE finished pattern: smart frequency switching 2011-Dec-09 04:10:38 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-09 04:10:38 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2011-Dec-09 04:10:39 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2011-Dec-09 04:10:39 COMMAND run_command_line: EXECUTING command 28: 'LOAD ages_mock.conf' 2011-Dec-09 04:10:39 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2011-Dec-09 04:10:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2011-Dec-09 04:10:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:10:39 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:10:39 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-09 04:10:39 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2011-Dec-09 04:10:39 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:10:39 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock.conf' 2011-Dec-09 04:10:39 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2011-Dec-09 04:10:39 LOG2 CIMA-antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.93956 J 2011-Dec-09 04:10:39 LOG2 CIMA-antvel: Computed apparent RA = 09:43:42.1 Dec = +22:49:29.2 2011-Dec-09 04:10:39 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 29438 2011 343 0.0 2011-Dec-09 04:10:39 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2011-Dec-09 04:10:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2011-Dec-09 04:10:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2011-Dec-09 04:10:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2011-Dec-09 04:10:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2011-Dec-09 04:10:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2011-Dec-09 04:10:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2011-Dec-09 04:10:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2011-Dec-09 04:10:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2011-Dec-09 04:10:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2011-Dec-09 04:10:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2011-Dec-09 04:10:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2011-Dec-09 04:10:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2011-Dec-09 04:10:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2011-Dec-09 04:10:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2011-Dec-09 04:10:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2011-Dec-09 04:10:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2011-Dec-09 04:10:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2011-Dec-09 04:10:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-09 04:10:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled1) "1" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled2) "0" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards1) "both" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards2) "both" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode1) "spectra" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode2) "spectra" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg1) "2-pol" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg2) "2-pol" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits1) "32" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits2) "32" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor1) "1" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor2) "1" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset1) "0.0" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset2) "0.0" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags1) "8192" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags2) "8192" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs1) "1000.0" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs2) "1000.0" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad1) "1" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad2) "0" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors1) "13" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors2) "0" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors1) "0" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors2) "0" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors1) "0" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors2) "0" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors1) "0" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors2) "0" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype1) "fits" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype2) "fits" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2011-Dec-09 04:10:41 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2011-Dec-09 04:10:42 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2011-Dec-09 04:10:42 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2011-Dec-09 04:10:42 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2011-Dec-09 04:10:42 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-09 04:10:42 BEGIN begin_task: Starting task 'configuring IF/LO path' 2011-Dec-09 04:10:42 LOG5 begin_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2011-Dec-09 04:10:42 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2011-Dec-09 04:10:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2011-Dec-09 04:10:42 LOG1 config_iflo: Receiver ALFA already selected 2011-Dec-09 04:10:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-09 04:10:42 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-09 04:10:42 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-09 04:10:42 LOG5 begin_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2011-Dec-09 04:10:42 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-09 04:10:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-09 04:10:42 LOG5 end_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2011-Dec-09 04:10:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-09 04:10:42 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-09 04:10:42 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2011-Dec-09 04:10:42 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2011-Dec-09 04:10:42 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2011-Dec-09 04:10:42 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2011-Dec-09 04:10:42 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2011-Dec-09 04:10:42 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2011-Dec-09 04:10:42 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2011-Dec-09 04:10:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2011-Dec-09 04:10:42 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2011-Dec-09 04:10:42 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2011-Dec-09 04:10:42 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2011-Dec-09 04:10:42 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2011-Dec-09 04:10:42 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2011-Dec-09 04:10:42 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2011-Dec-09 04:10:42 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2011-Dec-09 04:10:42 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2011-Dec-09 04:10:42 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2011-Dec-09 04:10:42 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2011-Dec-09 04:10:42 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2011-Dec-09 04:10:42 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2011-Dec-09 04:10:42 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2011-Dec-09 04:10:42 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2011-Dec-09 04:10:42 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2011-Dec-09 04:10:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:10:42 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2011-Dec-09 04:10:42 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2011-Dec-09 04:10:42 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2011-Dec-09 04:10:42 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2011-Dec-09 04:10:42 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2011-Dec-09 04:10:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2011-Dec-09 04:10:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 04:10:42 START begin_task: Starting task 'waiting on configuring IF/LO path' 2011-Dec-09 04:10:42 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2011-Dec-09 04:10:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2011-Dec-09 04:10:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2011-Dec-09 04:10:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:10:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 04:10:42 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:10:42 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:10:42 LOG4 got_cormsg: From DATATAKING: vw% DONE 2011-Dec-09 04:10:42 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2011-Dec-09 04:10:42 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2011-Dec-09 04:10:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2011-Dec-09 04:10:42 STOP finish_task: Finishing task 'configuring IF/LO path' 2011-Dec-09 04:10:42 LOG5 finish_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2011-Dec-09 04:10:42 DONE finish_task: DONE finished configuration: IF/LO path 2011-Dec-09 04:10:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-09 04:10:42 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2011-Dec-09 04:10:42 LOG5 end_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2011-Dec-09 04:10:42 BEGIN begin_task: Starting task 'configuring WAPPs' 2011-Dec-09 04:10:43 LOG5 begin_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2011-Dec-09 04:10:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2011-Dec-09 04:10:43 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2011-Dec-09 04:10:43 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Dec-09 04:10:43 START begin_task: Starting task 'selecting calibration port' 2011-Dec-09 04:10:43 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2011-Dec-09 04:10:43 LOG3 vw_send: To DATATAKING: calport 3 2011-Dec-09 04:10:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Dec-09 04:10:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 04:10:43 START begin_task: Starting task 'waiting on calport' 2011-Dec-09 04:10:43 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2011-Dec-09 04:10:43 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:10:43 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Dec-09 04:10:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 04:10:43 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:10:43 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-09 04:10:43 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Dec-09 04:10:43 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2011-Dec-09 04:10:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Dec-09 04:10:43 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Dec-09 04:10:43 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2011-Dec-09 04:10:43 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-09 04:10:43 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-09 04:10:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-09 04:10:43 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2011-Dec-09 04:10:43 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-09 04:10:43 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:10:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-09 04:10:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-09 04:10:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-09 04:10:43 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2011-Dec-09 04:10:43 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2011-Dec-09 04:10:43 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2011-Dec-09 04:10:43 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2011-Dec-09 04:10:43 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2011-Dec-09 04:10:43 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2011-Dec-09 04:10:43 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2011-Dec-09 04:10:43 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2011-Dec-09 04:10:43 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2011-Dec-09 04:10:43 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 CF 2011-Dec-09 04:10:43 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 CF 2011-Dec-09 04:10:43 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 CF 2011-Dec-09 04:10:43 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 CF 2011-Dec-09 04:10:43 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Dec-09 04:10:43 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Dec-09 04:10:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-09 04:10:43 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2011-Dec-09 04:10:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2011-Dec-09 04:10:43 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-09 04:10:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2011-Dec-09 04:10:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-09 04:10:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 CF' 2011-Dec-09 04:10:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-09 04:10:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-09 04:10:43 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2011-Dec-09 04:10:43 LOG3 sock_errsend: To WAPPDATA: FLUSH 2011-Dec-09 04:10:43 STOP finish_task: Finishing task 'configuring WAPPs' 2011-Dec-09 04:10:43 LOG5 finish_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2011-Dec-09 04:10:43 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2011-Dec-09 04:10:44 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-09 04:10:44 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2011-Dec-09 04:10:44 LOG5 end_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2011-Dec-09 04:10:44 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2011-Dec-09 04:10:44 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2011-Dec-09 04:10:44 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2011-Dec-09 04:10:44 INFO1 config_mock: Starting to configure the Mock spectrometer 2011-Dec-09 04:10:44 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Dec-09 04:10:44 START begin_task: Starting task 'selecting calibration port' 2011-Dec-09 04:10:44 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2011-Dec-09 04:10:44 LOG3 vw_send: To DATATAKING: calport 3 2011-Dec-09 04:10:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Dec-09 04:10:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 04:10:44 START begin_task: Starting task 'waiting on calport' 2011-Dec-09 04:10:44 LOG5 begin_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2011-Dec-09 04:10:44 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2011-Dec-09 04:10:44 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Dec-09 04:10:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 04:10:44 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:10:44 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-09 04:10:44 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Dec-09 04:10:44 LOG5 end_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2011-Dec-09 04:10:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Dec-09 04:10:44 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Dec-09 04:10:44 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2011-Dec-09 04:10:44 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-09 04:10:44 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-09 04:10:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-09 04:10:44 LOG5 begin_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2011-Dec-09 04:10:44 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-09 04:10:44 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:10:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-09 04:10:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-09 04:10:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-09 04:10:44 LOG5 end_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2011-Dec-09 04:10:44 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Dec-09 04:10:44 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Dec-09 04:10:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-09 04:10:44 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2011-Dec-09 04:10:44 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-09 04:10:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-09 04:10:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-09 04:10:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-09 04:10:44 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2011-Dec-09 04:10:44 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2011-Dec-09 04:10:44 LOG3 socket_wait: To MOCK: NOP 2011-Dec-09 04:10:44 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2011-Dec-09 04:10:44 LOG5 begin_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2011-Dec-09 04:10:45 ALERT got_mock_message: Mock spectrometer restarting 2011-Dec-09 04:10:45 LOG4 from_mock: From MOCK: nop ok 2011-Dec-09 04:10:45 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2011-Dec-09 04:10:45 LOG5 end_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2011-Dec-09 04:10:45 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2011-Dec-09 04:10:45 LOG2 config_mock: Mock spectrometer configuration group 1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2011-Dec-09 04:10:45 LOG2 config_mock: Mock spectrometer configuration group 1 (0): datatype=AB 2011-Dec-09 04:10:45 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bits=32 2011-Dec-09 04:10:45 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bwmhz=172.032 2011-Dec-09 04:10:45 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevif1hz=250000000 2011-Dec-09 04:10:45 LOG2 config_mock: Mock spectrometer configuration group 1 (0): digfreqoffhz=0.0 2011-Dec-09 04:10:45 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fftlen=8192 2011-Dec-09 04:10:45 LOG2 config_mock: Mock spectrometer configuration group 1 (0): dumptmsec=1.0 2011-Dec-09 04:10:45 LOG2 config_mock: Mock spectrometer configuration group 1 (0): blankatod=1 2011-Dec-09 04:10:45 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskadc=13 2011-Dec-09 04:10:45 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskpfb=0 2011-Dec-09 04:10:45 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskacc=0 2011-Dec-09 04:10:45 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskash=0 2011-Dec-09 04:10:45 LOG2 config_mock: Mock spectrometer configuration group 1 (0): adcclkhz=172032000 2011-Dec-09 04:10:45 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevlohz=175000000 325000000 2011-Dec-09 04:10:45 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fileprefix=a2048 2011-Dec-09 04:10:45 LOG2 config_mock: Mock spectrometer configuration group 1 (0): maxfilesizemb=2048 2011-Dec-09 04:10:45 LOG2 config_mock: Mock spectrometer configuration group 1 (0): calctl=c0 2011-Dec-09 04:10:45 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group 1' using string 'conf' 2011-Dec-09 04:10:45 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bits=32:bwmhz=172.032:pdevif1hz=250000000:digfreqoffhz=0.0:fftlen=8192:dumptmsec=1.0:blankatod=1:emaskadc=13:emaskpfb=0:emaskacc=0:emaskash=0:adcclkhz=172032000:pdevlohz=175000000 325000000:fileprefix=a2048:maxfilesizemb=2048:calctl=c0 2011-Dec-09 04:10:45 START begin_task: Starting task 'waiting on configure Mock spectrometer group 1' 2011-Dec-09 04:10:45 LOG5 begin_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2011-Dec-09 04:10:46 LOG4 from_mock: From MOCK: confok 2011-Dec-09 04:10:46 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group 1' with status 'OK' 2011-Dec-09 04:10:46 LOG5 end_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2011-Dec-09 04:10:46 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group 1' 2011-Dec-09 04:10:46 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group 2' using string 'conf' 2011-Dec-09 04:10:46 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2011-Dec-09 04:10:46 START begin_task: Starting task 'waiting on disable Mock spectrometer group 2' 2011-Dec-09 04:10:46 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2011-Dec-09 04:10:46 LOG4 from_mock: From MOCK: confok 2011-Dec-09 04:10:46 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group 2' with status 'OK' 2011-Dec-09 04:10:46 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2011-Dec-09 04:10:46 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group 2' 2011-Dec-09 04:10:46 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2011-Dec-09 04:10:46 LOG5 finish_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2011-Dec-09 04:10:46 DONE finish_task: DONE finished configuring: the Mock spectrometer 2011-Dec-09 04:10:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-09 04:10:46 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2011-Dec-09 04:10:46 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2011-Dec-09 04:10:46 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2011-Dec-09 04:10:46 COMMAND run_command_line: EXECUTING command 29: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2011-Dec-09 04:10:46 COMMAND run_command_line: EXECUTING command 30: 'CATALOG AGESFull.cat' 2011-Dec-09 04:10:46 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2011-Dec-09 04:10:46 COMMAND run_command_line: EXECUTING command 33: 'IF LSTSLEW(AGES3193_p1_089) < 085641 THEN' 2011-Dec-09 04:10:47 LOG3 is_if_valid: Current source data: up 254.3 14.2 UP - - 141 0.8 2011-Dec-09 04:10:47 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p1_089) < 085641 2011-Dec-09 04:10:47 INFO5 is_if_valid: Condition parsed as: 8.9242313333333332 < 8.9447222222222216 2011-Dec-09 04:10:47 COMMAND run_command_line: EXECUTING command 34: 'FIXEDDRIFT az=253.90 alfaangle=-57.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_089 ra=95300.00 dec=214100.00' 2011-Dec-09 04:10:47 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-09 04:10:47 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-09 04:10:47 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 253.90 -57.8 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p1_089 95300.00 214100.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-09 04:10:47 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-09 04:10:47 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2011-Dec-09 04:10:47 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'galfasrc' 2011-Dec-09 04:10:47 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-09 04:10:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p1_089} 2011-Dec-09 04:10:47 INFO3 fixed_driftmap: Sending telescope to Az = 253.90 and ZA = 13.78 2011-Dec-09 04:10:47 LOG3 track_source: Calling 'track_source AGES3193_p1_089 253.90 13.7757494559 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-09 04:10:47 START begin_task: Starting task 'sending tracking commands' 2011-Dec-09 04:10:47 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2011-Dec-09 04:10:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_089} INFO {Slewing to source 'AGES3193_p1_089' ...} 2011-Dec-09 04:10:47 INFO1 track_source: Starting to track AGES3193_p1_089 2011-Dec-09 04:10:47 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_089" 2011-Dec-09 04:10:47 LOG3 vw_send: To DATATAKING: set ra 253.90 2011-Dec-09 04:10:47 LOG3 vw_send: To DATATAKING: set dec 13.7757494559 2011-Dec-09 04:10:47 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-09 04:10:47 LOG3 vw_send: To DATATAKING: pnt tr 253.90 13.7757494559 -CF 2011-Dec-09 04:10:47 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-09 04:10:48 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-09 04:10:48 LOG5 finish_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2011-Dec-09 04:10:48 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-09 04:10:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:10:48 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-09 04:10:48 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2011-Dec-09 04:10:48 START begin_task: Starting task 'rotate ALFA to -57.8 degrees' 2011-Dec-09 04:10:48 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2011-Dec-09 04:10:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -57.8 degrees ...} 2011-Dec-09 04:10:48 INFO2 rotate_alfa: ALFA commanded to -57.8 degrees 2011-Dec-09 04:10:48 LOG3 sock_errsend: To ALFAMOTOR: POSITION -57.8 REPLY 2011-Dec-09 04:10:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-09 04:10:48 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-09 04:10:48 LOG5 begin_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2011-Dec-09 04:10:48 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_089" 2011-Dec-09 04:10:48 LOG4 got_cormsg: From DATATAKING: set ra 253.90 2011-Dec-09 04:10:48 LOG4 got_cormsg: From DATATAKING: set dec 13.7757494559 2011-Dec-09 04:10:48 LOG4 got_cormsg: From DATATAKING: vw% 253.90 2011-Dec-09 04:10:48 LOG4 got_cormsg: From DATATAKING: vw% 13.7757494559 2011-Dec-09 04:10:48 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:10:48 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-09 04:10:48 LOG4 got_cormsg: From DATATAKING: pnt tr 253.90 13.7757494559 -CF 2011-Dec-09 04:10:48 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-09 04:10:48 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-09 04:10:48 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:11:31 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-09 04:11:31 INFO3 alfa_motor: ALFA rotator in-position -57.80 degrees 2011-Dec-09 04:11:31 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-09 04:11:31 LOG5 end_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2011-Dec-09 04:11:31 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-09 04:11:31 STOP finish_task: Finishing task 'rotate ALFA to -57.8 degrees' 2011-Dec-09 04:11:31 LOG5 finish_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2011-Dec-09 04:11:31 INFO2 finish_task: DONE finished configuration: rotating ALFA to -57.8 degrees 2011-Dec-09 04:11:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:11:31 STOP end_task: Finishing task 'rotate ALFA to -57.8 degrees' with status 'OK' 2011-Dec-09 04:11:31 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2011-Dec-09 04:11:31 START begin_task: Starting task 'waiting on telescope' 2011-Dec-09 04:11:31 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2011-Dec-09 04:11:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-09 04:11:31 LOG3 waittrk: Start waittrk 5 2011-Dec-09 04:11:31 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-09 04:11:31 LOG5 begin_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2011-Dec-09 04:11:37 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-09 04:11:37 LOG5 end_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2011-Dec-09 04:11:37 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-09 04:11:37 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2011-Dec-09 04:11:37 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-09 04:11:37 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2011-Dec-09 04:11:37 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-09 04:11:37 INFO2 waittrk: Now tracking AGES3193_p1_089 2011-Dec-09 04:11:37 LOG4 waittrk: Current telescope position: Az = 253.45 ZA = 13.78 2011-Dec-09 04:11:37 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-09 04:11:37 LOG5 finish_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2011-Dec-09 04:11:37 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-09 04:11:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:11:37 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-09 04:11:37 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2011-Dec-09 04:11:37 START begin_task: Starting task 'selecting calibration type' 2011-Dec-09 04:11:37 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2011-Dec-09 04:11:37 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-09 04:11:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-09 04:11:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 04:11:37 START begin_task: Starting task 'waiting on setcal' 2011-Dec-09 04:11:37 LOG5 begin_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2011-Dec-09 04:11:37 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-09 04:11:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 04:11:37 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:11:37 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-09 04:11:37 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-09 04:11:37 LOG5 end_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2011-Dec-09 04:11:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-09 04:11:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-09 04:11:37 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-09 04:11:37 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-09 04:11:37 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2011-Dec-09 04:11:37 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:11:37 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-09 04:11:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-09 04:11:37 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2011-Dec-09 04:11:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-09 04:11:37 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-09 04:11:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-09 04:11:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-09 04:11:37 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-09 04:11:37 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2011-Dec-09 04:11:37 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-09 04:11:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-09 04:11:37 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2011-Dec-09 04:11:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-09 04:11:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-09 04:11:37 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-09 04:11:37 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2011-Dec-09 04:11:37 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Dec-09 04:11:37 INFO2 astwait: Waiting for 12 seconds from 08:11:37 to 08:11:49 UTC ... 2011-Dec-09 04:11:37 LOG4 send_obs_status: To obs_status: <1> TASKTIME 12 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-09 04:11:37 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Dec-09 04:11:37 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2011-Dec-09 04:11:49 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Dec-09 04:11:49 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2011-Dec-09 04:11:49 INFO3 astwait: Finished waiting 2011-Dec-09 04:11:49 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-09 04:11:49 LOG5 dopset_later: Calling 'dopset_later 60.725670315309159' 2011-Dec-09 04:11:49 INFO3 dopset_later: Setting Doppler correction for 04:12:49 (60.7 seconds from now) 2011-Dec-09 04:11:49 LOG5 antvel: Calling 'antvel 253.900000 13.775749 F Heliocentric 60.725670315309159' 2011-Dec-09 04:11:49 LOG2 antvel: Transforming current Az = 253.90 ZA = 13.78 to apparent RA = 09:53:41.4 Dec = +21:37:23.7 2011-Dec-09 04:11:49 LOG2 antvel: Parameters to Doppler: Heliocentric 29569 2011 343 0.0 2011-Dec-09 04:11:49 INFO5 antvel: Computed antenna velocity: -27.38931 km/s 2011-Dec-09 04:11:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-27.3893139652 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-09 04:11:49 INFO4 dopset_gen: New sky frequencies: 1381.369632 1381.369632 1381.369632 1381.369632 1381.369632 1381.369632 1381.369632 1381.369632 1381.369632 2011-Dec-09 04:11:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.369632 sky0=1381.369632 sky1=1381.369632 sky2=1381.369632 sky3=1381.369632 sky4=1381.369632 sky5=1381.369632 sky6=1381.369632 sky7=1381.369632 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:11:49 LOG2 dopset_gen: Result from 'sky2syn': 1631.369632 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:11:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631369632.0} 2011-Dec-09 04:11:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:11:49 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-09 04:11:49 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-09 04:11:49 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.6 Dec = +21:40:46.9 2011-Dec-09 04:11:49 LOG3 track_source: Calling 'track_source AGES3193_p1_089 095203.6 214046.9 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-09 04:11:49 START begin_task: Starting task 'sending tracking commands' 2011-Dec-09 04:11:49 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2011-Dec-09 04:11:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_089} INFO {Slewing to source 'AGES3193_p1_089' ...} 2011-Dec-09 04:11:49 INFO1 track_source: Starting to track AGES3193_p1_089 2011-Dec-09 04:11:49 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_089" 2011-Dec-09 04:11:49 LOG3 vw_send: To DATATAKING: set ra 095203.6 2011-Dec-09 04:11:49 LOG3 vw_send: To DATATAKING: set dec 214046.9 2011-Dec-09 04:11:49 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-09 04:11:49 LOG3 vw_send: To DATATAKING: pnt tr 095203.6 214046.9 -CJ 2011-Dec-09 04:11:49 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-09 04:11:49 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-09 04:11:49 LOG5 finish_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2011-Dec-09 04:11:49 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-09 04:11:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:11:49 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-09 04:11:49 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2011-Dec-09 04:11:49 START begin_task: Starting task 'waiting on telescope' 2011-Dec-09 04:11:49 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2011-Dec-09 04:11:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-09 04:11:49 LOG3 waittrk: Start waittrk 5 2011-Dec-09 04:11:49 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-09 04:11:49 LOG5 begin_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2011-Dec-09 04:11:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631369632.0} 2011-Dec-09 04:11:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:11:49 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_089" 2011-Dec-09 04:11:49 LOG4 got_cormsg: From DATATAKING: set ra 095203.6 2011-Dec-09 04:11:49 LOG4 got_cormsg: From DATATAKING: set dec 214046.9 2011-Dec-09 04:11:49 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2011-Dec-09 04:11:49 LOG4 got_cormsg: From DATATAKING: 095203.6 2011-Dec-09 04:11:49 LOG4 got_cormsg: From DATATAKING: vw% 214046.9 2011-Dec-09 04:11:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:11:49 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-09 04:11:49 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.6 214046.9 -CJ 2011-Dec-09 04:11:49 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-09 04:11:49 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-09 04:11:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:11:54 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-09 04:11:54 LOG5 end_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2011-Dec-09 04:11:54 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-09 04:11:54 LOG5 begin_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2011-Dec-09 04:11:56 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-09 04:11:56 LOG5 end_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2011-Dec-09 04:11:56 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-09 04:11:56 INFO2 waittrk: Now tracking AGES3193_p1_089 2011-Dec-09 04:11:56 LOG4 waittrk: Current telescope position: Az = 253.45 ZA = 13.76 2011-Dec-09 04:11:56 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-09 04:11:56 LOG5 finish_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2011-Dec-09 04:11:56 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-09 04:11:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:11:56 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-09 04:11:56 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2011-Dec-09 04:11:56 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-09 04:11:56 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2011-Dec-09 04:11:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-09 04:11:56 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-09 04:11:56 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-09 04:11:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-09 04:11:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 04:11:56 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-09 04:11:56 LOG5 begin_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2011-Dec-09 04:11:57 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-09 04:11:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 04:12:00 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:12:00 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-09 04:12:00 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-09 04:12:00 LOG5 end_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2011-Dec-09 04:12:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-09 04:12:00 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-09 04:12:00 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2011-Dec-09 04:12:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-09 04:12:00 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-09 04:12:00 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-09 04:12:00 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-09 04:12:00 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-09 04:12:00 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-09 04:12:00 LOG5 begin_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2011-Dec-09 04:12:00 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:12:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-09 04:12:00 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 8 6 dB 2011-Dec-09 04:12:00 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 3 dB 2011-Dec-09 04:12:00 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 4 dB --- beam 3: 2 2 dB 2011-Dec-09 04:12:00 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2011-Dec-09 04:12:00 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-09 04:12:00 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-09 04:12:00 LOG5 end_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2011-Dec-09 04:12:00 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.904 1.025 ALFA beam 1: 0.896 0.900 2011-Dec-09 04:12:00 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.109 0.946 ALFA beam 3: 1.022 1.096 2011-Dec-09 04:12:00 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.788 1.076 ALFA beam 5: 0.947 1.115 2011-Dec-09 04:12:00 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.114 0.014 ALFA beam 7: 0.969 0.014 2011-Dec-09 04:12:00 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-09 04:12:00 LOG5 finish_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2011-Dec-09 04:12:00 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-09 04:12:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:12:01 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-09 04:12:01 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2011-Dec-09 04:12:01 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-09 04:12:01 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2011-Dec-09 04:12:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-09 04:12:01 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-09 04:12:01 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-09 04:12:01 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-09 04:12:01 LOG5 begin_task: Level: (5) ID = <10127> Status = 0 0 0 0 ok 2011-Dec-09 04:12:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-09 04:12:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.904 1.025 0.896 0.900 2011-Dec-09 04:12:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.109 0.946 1.022 1.096 2011-Dec-09 04:12:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.788 1.076 0.947 1.115 2011-Dec-09 04:12:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.114 0.014 0.969 0.014 2011-Dec-09 04:12:07 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.9 28.1 B 29.6 29.6 mn:A 0.2 0.1 B -0.3 -0.3 gn: 11 11 2011-Dec-09 04:12:07 INFO3 from_mock: From MOCK: b0s1g0 rms:A 32.5 31.1 B 27.6 29.2 mn:A 0.2 -0.5 B -0.3 0.2 gn: 12 11 2011-Dec-09 04:12:07 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.5 28.6 B 32.6 28.6 mn:A 0.6 0.6 B 0.2 -0.0 gn: 7 11 2011-Dec-09 04:12:07 INFO3 from_mock: From MOCK: b1s1g0 rms:A 30.1 27.7 B 31.1 31.1 mn:A -0.2 -0.3 B 0.5 0.1 gn: 8 10 2011-Dec-09 04:12:07 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.7 30.8 B 31.1 32.5 mn:A -0.1 -0.5 B 0.3 -0.1 gn: 11 12 2011-Dec-09 04:12:07 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.0 29.3 B 32.1 29.8 mn:A 0.2 -0.3 B -0.0 0.2 gn: 11 12 2011-Dec-09 04:12:07 INFO3 from_mock: From MOCK: b3s0g0 rms:A 28.5 28.3 B 30.8 27.4 mn:A 0.3 -0.3 B -0.0 -0.4 gn: 12 12 2011-Dec-09 04:12:07 INFO3 from_mock: From MOCK: b3s1g0 rms:A 29.9 29.2 B 29.3 30.5 mn:A -0.3 0.3 B -0.0 0.1 gn: 12 12 2011-Dec-09 04:12:07 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.5 28.6 B 31.0 31.2 mn:A -0.4 -0.3 B -0.4 -0.0 gn: 13 12 2011-Dec-09 04:12:07 INFO3 from_mock: From MOCK: b4s1g0 rms:A 31.5 28.6 B 29.9 28.9 mn:A -0.1 -0.0 B -0.3 0.1 gn: 16 13 2011-Dec-09 04:12:07 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.2 28.1 B 30.8 30.8 mn:A 0.3 0.4 B 0.0 0.5 gn: 12 11 2011-Dec-09 04:12:07 INFO3 from_mock: From MOCK: b5s1g0 rms:A 29.3 29.1 B 31.1 30.8 mn:A -0.3 0.4 B -0.1 0.3 gn: 12 11 2011-Dec-09 04:12:07 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.9 30.2 B 14.3 14.7 mn:A -0.3 0.1 B 0.5 -0.4 gn: 13 31 2011-Dec-09 04:12:07 INFO3 from_mock: From MOCK: b6s1g0 rms:A 29.9 27.1 B 11.3 11.0 mn:A 0.6 0.6 B 0.0 0.2 gn: 13 31 2011-Dec-09 04:12:07 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-09 04:12:07 LOG5 end_task: Level: (5) ID = <10127> Status = 0 0 0 0 ok 2011-Dec-09 04:12:07 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-09 04:12:07 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-09 04:12:07 LOG5 finish_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2011-Dec-09 04:12:07 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-09 04:12:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:12:07 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-09 04:12:07 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2011-Dec-09 04:12:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-09 04:12:07 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-09 04:12:07 LOG5 finish_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2011-Dec-09 04:12:07 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-09 04:12:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:12:07 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-09 04:12:07 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2011-Dec-09 04:12:07 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 CF 2011-Dec-09 04:12:07 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 CF 2011-Dec-09 04:12:07 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 CF 2011-Dec-09 04:12:07 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 CF 2011-Dec-09 04:12:07 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-09 04:12:07 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-09 04:12:07 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2011-Dec-09 04:12:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-09 04:12:07 START begin_task: Starting task 'selecting calibration type' 2011-Dec-09 04:12:07 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2011-Dec-09 04:12:07 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-09 04:12:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-09 04:12:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 04:12:07 START begin_task: Starting task 'waiting on setcal' 2011-Dec-09 04:12:07 LOG5 begin_task: Level: (5) ID = <10130> Status = 0 0 0 0 ok 2011-Dec-09 04:12:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 CF' 2011-Dec-09 04:12:07 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-09 04:12:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 04:12:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:12:07 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-09 04:12:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-09 04:12:07 LOG5 end_task: Level: (5) ID = <10130> Status = 0 0 0 0 ok 2011-Dec-09 04:12:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-09 04:12:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-09 04:12:07 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-09 04:12:07 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-09 04:12:07 LOG5 begin_task: Level: (5) ID = <10131> Status = 0 0 0 0 ok 2011-Dec-09 04:12:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:12:08 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-09 04:12:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-09 04:12:08 LOG5 end_task: Level: (5) ID = <10131> Status = 0 0 0 0 ok 2011-Dec-09 04:12:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-09 04:12:08 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-09 04:12:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-09 04:12:08 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-09 04:12:08 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-09 04:12:08 LOG5 begin_task: Level: (5) ID = <10132> Status = 0 0 0 0 ok 2011-Dec-09 04:12:08 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-09 04:12:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-09 04:12:08 LOG5 end_task: Level: (5) ID = <10132> Status = 0 0 0 0 ok 2011-Dec-09 04:12:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-09 04:12:08 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-09 04:12:08 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-09 04:12:08 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2011-Dec-09 04:12:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-09 04:12:08 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-09 04:12:08 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-09 04:12:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-09 04:12:08 LOG5 begin_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2011-Dec-09 04:12:08 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-09 04:12:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-09 04:12:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-09 04:12:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-09 04:12:08 LOG5 end_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2011-Dec-09 04:12:08 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-09 04:12:08 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-09 04:12:08 LOG5 begin_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2011-Dec-09 04:12:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-09 04:12:08 LOG5 log_alfabeam: Parameters: 9.8676666666666684 21.679694444444443 8.933459 2011.9395621656906 -57.800030 2011-Dec-09 04:12:08 LOG4 log_alfabeam: ALFABEAM 0 9.867666666666668 21.679694444444419 2011-Dec-09 04:12:08 LOG4 log_alfabeam: ALFABEAM 1 9.868642612896332 21.589296535561306 2011-Dec-09 04:12:08 LOG4 log_alfabeam: ALFABEAM 2 9.874698956876587 21.649289390570399 2011-Dec-09 04:12:08 LOG4 log_alfabeam: ALFABEAM 3 9.873697983770651 21.740257847366330 2011-Dec-09 04:12:08 LOG4 log_alfabeam: ALFABEAM 4 9.866646744787388 21.770026374734563 2011-Dec-09 04:12:08 LOG4 log_alfabeam: ALFABEAM 5 9.860628361085595 21.709382869486326 2011-Dec-09 04:12:08 LOG4 log_alfabeam: ALFABEAM 6 9.861623159763360 21.619620550650428 2011-Dec-09 04:12:08 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-09 04:12:08 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-09 04:12:08 LOG3 take_mock_data: PSET configuration: obsnm=CF 2011-Dec-09 04:12:08 LOG3 take_mock_data: PSET configuration: object=AGES3193_p1_089 2011-Dec-09 04:12:08 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-09 04:12:08 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-09 04:12:08 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-09 04:12:08 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-09 04:12:08 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-09 04:12:08 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-09 04:12:08 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-09 04:12:08 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-09 04:12:08 LOG3 take_mock_data: PSET configuration: patternid=134300206 2011-Dec-09 04:12:08 LOG3 take_mock_data: PSET configuration: scanid=134300220 2011-Dec-09 04:12:08 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-09 04:12:08 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-09 04:12:08 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-09 04:12:08 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456369632.0 2011-Dec-09 04:12:08 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306369632.0 2011-Dec-09 04:12:08 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-09 04:12:08 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-09 04:12:08 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=CF:object=AGES3193_p1_089:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=134300206:scanid=134300220:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456369632.0:topobfreqhz=1306369632.0:filetype=1 2011-Dec-09 04:12:08 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-09 04:12:08 LOG5 begin_task: Level: (5) ID = <10135> Status = 0 0 0 0 ok 2011-Dec-09 04:12:08 LOG4 from_mock: From MOCK: psetok 2011-Dec-09 04:12:08 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-09 04:12:08 LOG5 end_task: Level: (5) ID = <10135> Status = 0 0 0 0 ok 2011-Dec-09 04:12:08 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-09 04:12:08 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-09 04:12:08 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-09 04:12:08 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-09 04:12:08 LOG5 begin_task: Level: (5) ID = <10136> Status = 0 0 0 0 ok 2011-Dec-09 04:12:08 NOTE WAPPDATA-new_file: New FITS file: wapp.20111209.a2048.0001.fits 2011-Dec-09 04:12:08 LOG4 from_mock: From MOCK: starok 2011-Dec-09 04:12:08 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-09 04:12:08 LOG5 end_task: Level: (5) ID = <10136> Status = 0 0 0 0 ok 2011-Dec-09 04:12:08 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-09 04:12:08 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134300220 2011-Dec-09 04:12:09 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-09 04:12:09 LOG5 begin_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2011-Dec-09 04:12:09 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111209.a2048.0001.fits} 2011-Dec-09 04:12:09 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-09 04:12:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:12:09 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-09 04:12:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-09 04:12:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29530.00 2011-Dec-09 04:12:11 INFO2 got_mock_message: Mock spectrometer start file number is 00000 2011-Dec-09 04:12:11 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-09 04:12:11 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-09 04:12:11 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-09 04:12:11 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-09 04:12:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-09 04:12:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-09 04:12:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-09 04:12:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-09 04:12:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-09 04:12:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-09 04:12:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-09 04:12:11 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-09 04:12:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:12:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:12:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:12:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:12:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:12:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:12:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:12:14 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:12:14.00 2011-Dec-09 04:12:14 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323418334.00 Fri Dec 9 04:12:14 2011 2011-Dec-09 04:12:14 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-09 04:12:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.369632 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:12:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.369632 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:12:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.369632 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:12:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.369632 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:12:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.369632 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.542 (still bad) 2011-Dec-09 04:12:15 LOG3 WAPP=2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.369632 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:12:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.369632 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:12:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.369632 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:12:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.369632 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:12:15 LOG3 WAPP=1-save_rfcalc: Channel 5: Sky freq = 1381.369632 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:12:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:12:19 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-09 04:12:20 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-09 04:12:20 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-09 04:12:20 LOG5 end_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2011-Dec-09 04:12:20 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-09 04:12:20 LOG5 end_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2011-Dec-09 04:12:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-09 04:12:20 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-09 04:12:20 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-09 04:12:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-09 04:12:20 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2011-Dec-09 04:12:20 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-09 04:12:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-09 04:12:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-09 04:12:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-09 04:12:20 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2011-Dec-09 04:12:20 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-09 04:12:20 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-09 04:12:20 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2011-Dec-09 04:12:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-09 04:12:20 LOG5 log_alfabeam: Parameters: 9.8676666666666684 21.679694444444443 8.936802 2011.9395625459476 -57.800030 2011-Dec-09 04:12:20 LOG4 log_alfabeam: ALFABEAM 0 9.867666666666668 21.679694444444433 2011-Dec-09 04:12:20 LOG4 log_alfabeam: ALFABEAM 1 9.868648872660698 21.589309765534470 2011-Dec-09 04:12:20 LOG4 log_alfabeam: ALFABEAM 2 9.874701081682678 21.649384077871368 2011-Dec-09 04:12:20 LOG4 log_alfabeam: ALFABEAM 3 9.873693704140528 21.740340918869791 2011-Dec-09 04:12:20 LOG4 log_alfabeam: ALFABEAM 4 9.866640333364080 21.770012319005641 2011-Dec-09 04:12:20 LOG4 log_alfabeam: ALFABEAM 5 9.860626279781673 21.709285841948628 2011-Dec-09 04:12:20 LOG4 log_alfabeam: ALFABEAM 6 9.861627344920239 21.619539183915919 2011-Dec-09 04:12:20 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-09 04:12:20 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-09 04:12:20 LOG3 take_mock_data: PSET configuration: obsnm=CF 2011-Dec-09 04:12:20 LOG3 take_mock_data: PSET configuration: object=AGES3193_p1_089 2011-Dec-09 04:12:20 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-09 04:12:20 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-09 04:12:20 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-09 04:12:20 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-09 04:12:20 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-09 04:12:20 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-09 04:12:20 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-09 04:12:20 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-09 04:12:20 LOG3 take_mock_data: PSET configuration: patternid=134300206 2011-Dec-09 04:12:20 LOG3 take_mock_data: PSET configuration: scanid=134300221 2011-Dec-09 04:12:20 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-09 04:12:20 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-09 04:12:20 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-09 04:12:20 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456369632.0 2011-Dec-09 04:12:20 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306369632.0 2011-Dec-09 04:12:20 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-09 04:12:20 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-09 04:12:20 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=CF:object=AGES3193_p1_089:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=134300206:scanid=134300221:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456369632.0:topobfreqhz=1306369632.0:filetype=1 2011-Dec-09 04:12:20 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-09 04:12:20 LOG5 begin_task: Level: (5) ID = <10140> Status = 0 0 0 0 ok 2011-Dec-09 04:12:20 LOG4 from_mock: From MOCK: psetok 2011-Dec-09 04:12:20 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-09 04:12:20 LOG5 end_task: Level: (5) ID = <10140> Status = 0 0 0 0 ok 2011-Dec-09 04:12:20 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-09 04:12:20 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-09 04:12:20 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-09 04:12:20 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-09 04:12:20 LOG5 begin_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2011-Dec-09 04:12:20 LOG4 from_mock: From MOCK: starok 2011-Dec-09 04:12:20 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-09 04:12:20 LOG5 end_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2011-Dec-09 04:12:20 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-09 04:12:20 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134300221 2011-Dec-09 04:12:20 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-09 04:12:20 LOG5 begin_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2011-Dec-09 04:12:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:12:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-09 04:12:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29541.00 2011-Dec-09 04:12:21 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-09 04:12:21 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-09 04:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.542 (still bad) 2011-Dec-09 04:12:23 INFO2 got_mock_message: Mock spectrometer start file number is 00100 2011-Dec-09 04:12:23 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-09 04:12:23 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-09 04:12:23 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-09 04:12:23 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-09 04:12:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-09 04:12:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-09 04:12:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-09 04:12:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-09 04:12:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-09 04:12:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-09 04:12:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-09 04:12:23 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-09 04:12:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:12:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:12:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:12:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:12:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:12:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:12:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:12:26 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:12:26.01 2011-Dec-09 04:12:26 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323418346.01 Fri Dec 9 04:12:26 2011 2011-Dec-09 04:12:26 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-09 04:12:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.369632 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:12:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.369632 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:12:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.369632 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:12:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.369632 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:12:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.369632 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:12:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.369632 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:12:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.369632 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:12:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.369632 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:12:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.369632 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:12:26 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-09 04:12:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-09 04:12:31 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-09 04:12:32 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-09 04:12:32 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-09 04:12:32 LOG5 end_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2011-Dec-09 04:12:32 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-09 04:12:32 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2011-Dec-09 04:12:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-09 04:12:32 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-09 04:12:32 LOG5 finish_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2011-Dec-09 04:12:32 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-09 04:12:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:12:32 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-09 04:12:32 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2011-Dec-09 04:12:32 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-09 04:12:32 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 253.90 and ZA = 13.78 2011-Dec-09 04:12:32 LOG3 track_source: Calling 'track_source AGES3193_p1_089 253.90 13.7757494559 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-09 04:12:32 START begin_task: Starting task 'sending tracking commands' 2011-Dec-09 04:12:32 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2011-Dec-09 04:12:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_089} INFO {Slewing to source 'AGES3193_p1_089' ...} 2011-Dec-09 04:12:32 INFO1 track_source: Starting to track AGES3193_p1_089 2011-Dec-09 04:12:32 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_089" 2011-Dec-09 04:12:32 LOG3 vw_send: To DATATAKING: set ra 253.90 2011-Dec-09 04:12:32 LOG3 vw_send: To DATATAKING: set dec 13.7757494559 2011-Dec-09 04:12:32 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-09 04:12:32 LOG3 vw_send: To DATATAKING: pnt tr 253.90 13.7757494559 -CF 2011-Dec-09 04:12:32 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-09 04:12:32 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-09 04:12:32 LOG5 finish_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2011-Dec-09 04:12:32 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-09 04:12:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:12:32 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-09 04:12:32 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2011-Dec-09 04:12:32 LOG1 fixed_driftmap: Parameters: HA = -00:56:59.3 Start = 08:56:42.3 LST = 08:56:24.5 diff = 17.8 secs 2011-Dec-09 04:12:32 INFO2 fixed_driftmap: Waiting 15.8 seconds for RA 9:53:42 2011-Dec-09 04:12:32 INFO2 lstwait: Waiting for 15.7 secs from LST 08:56:25 to LST 08:56:40 ... 2011-Dec-09 04:12:32 LOG4 send_obs_status: To obs_status: <1> TASKTIME 15.73165831818919 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-09 04:12:32 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-09 04:12:32 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2011-Dec-09 04:12:32 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_089" 2011-Dec-09 04:12:32 LOG4 got_cormsg: From DATATAKING: set ra 253.90 2011-Dec-09 04:12:32 LOG4 got_cormsg: From DATATAKING: set dec 13.7757494559 2011-Dec-09 04:12:32 LOG4 got_cormsg: From DATATAKING: vw% 253.90 2011-Dec-09 04:12:32 LOG4 got_cormsg: From DATATAKING: vw% 13.7757494559 2011-Dec-09 04:12:32 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:12:32 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-09 04:12:32 LOG4 got_cormsg: From DATATAKING: pnt tr 253.90 13.7757494559 -CF 2011-Dec-09 04:12:32 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-09 04:12:32 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-09 04:12:32 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-09 04:12:48 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-09 04:12:48 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2011-Dec-09 04:12:48 LOG4 lstwait: Finished waiting 0.27 seconds late 2011-Dec-09 04:12:48 INFO3 lstwait: Finished waiting 2011-Dec-09 04:12:48 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-09 04:12:48 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-09 04:12:48 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-09 04:12:48 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-09 04:12:48 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-09 04:12:48 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-09 04:12:48 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2011-Dec-09 04:12:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-09 04:12:48 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-09 04:12:48 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-09 04:12:48 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-09 04:12:48 LOG3 take_mock_data: PSET configuration: obsnm=CF 2011-Dec-09 04:12:48 LOG3 take_mock_data: PSET configuration: object=AGES3193_p1_089 2011-Dec-09 04:12:48 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-09 04:12:48 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-09 04:12:48 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-09 04:12:48 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-09 04:12:48 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-09 04:12:48 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-09 04:12:48 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-09 04:12:48 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-09 04:12:48 LOG3 take_mock_data: PSET configuration: patternid=134300222 2011-Dec-09 04:12:48 LOG3 take_mock_data: PSET configuration: scanid=134300222 2011-Dec-09 04:12:48 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-09 04:12:48 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-09 04:12:48 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-09 04:12:48 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456369632.0 2011-Dec-09 04:12:48 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306369632.0 2011-Dec-09 04:12:48 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-09 04:12:48 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-09 04:12:48 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=CF:object=AGES3193_p1_089:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=134300222:scanid=134300222:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456369632.0:topobfreqhz=1306369632.0:filetype=1 2011-Dec-09 04:12:48 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-09 04:12:48 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2011-Dec-09 04:12:48 LOG4 from_mock: From MOCK: psetok 2011-Dec-09 04:12:48 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-09 04:12:48 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2011-Dec-09 04:12:48 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-09 04:12:48 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-09 04:12:48 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-09 04:12:48 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-09 04:12:48 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2011-Dec-09 04:12:48 LOG4 from_mock: From MOCK: starok 2011-Dec-09 04:12:48 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-09 04:12:48 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2011-Dec-09 04:12:48 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-09 04:12:48 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 134300222 2011-Dec-09 04:12:49 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-09 04:12:49 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2011-Dec-09 04:12:49 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-09 04:12:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:12:49 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-09 04:12:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-09 04:12:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29570.00 2011-Dec-09 04:12:50 INFO2 got_mock_message: Mock spectrometer start file number is 00200 2011-Dec-09 04:12:50 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-09 04:12:50 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2011-Dec-09 04:12:50 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-09 04:12:50 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-09 04:12:50 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-09 04:12:50 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-09 04:12:50 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-09 04:12:50 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-09 04:12:50 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-09 04:12:50 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-09 04:12:50 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-09 04:12:50 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-09 04:12:50 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 04:12:50 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 04:12:50 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 04:12:50 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 04:12:50 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 04:12:50 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 04:12:50 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 04:12:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.369632 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:12:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.369632 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:12:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.369632 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:12:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.369632 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:12:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.369632 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:12:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.369632 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:12:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.369632 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:12:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.369632 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:12:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.369632 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-09 04:12:52 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:12:53.00 2011-Dec-09 04:12:53 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323418373.00 Fri Dec 9 04:12:53 2011 2011-Dec-09 04:12:53 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-09 04:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2011-Dec-09 04:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2011-Dec-09 04:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2011-Dec-09 04:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-09 04:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2011-Dec-09 04:13:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-09 04:13:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.907 1.030 0.903 0.904 2011-Dec-09 04:13:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.111 0.947 1.025 1.099 2011-Dec-09 04:13:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.792 1.078 0.949 1.115 2011-Dec-09 04:13:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.120 0.025 0.973 0.025 2011-Dec-09 04:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2011-Dec-09 04:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2011-Dec-09 04:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2011-Dec-09 04:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2011-Dec-09 04:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2011-Dec-09 04:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2011-Dec-09 04:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2011-Dec-09 04:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2011-Dec-09 04:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2011-Dec-09 04:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2011-Dec-09 04:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2011-Dec-09 04:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2011-Dec-09 04:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2011-Dec-09 04:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.123 (still bad) 2011-Dec-09 04:13:34 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 04:13:34.297 (seconds: 15214.297)!} 2011-Dec-09 04:13:34 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 04:13:34.297 (seconds: 15214.297)! 2011-Dec-09 04:13:35 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 15213.0 to 15214.0! 2011-Dec-09 04:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2011-Dec-09 04:13:36 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (15213.0 - 15215.0)! 2011-Dec-09 04:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2011-Dec-09 04:13:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2011-Dec-09 04:13:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2011-Dec-09 04:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2011-Dec-09 04:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.129 (still bad) 2011-Dec-09 04:13:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2011-Dec-09 04:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2011-Dec-09 04:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2011-Dec-09 04:13:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2011-Dec-09 04:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2011-Dec-09 04:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2011-Dec-09 04:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2011-Dec-09 04:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2011-Dec-09 04:14:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-09 04:14:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.906 1.028 0.908 0.906 2011-Dec-09 04:14:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.114 0.951 1.025 1.099 2011-Dec-09 04:14:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.793 1.080 0.948 1.118 2011-Dec-09 04:14:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.120 0.025 0.973 0.026 2011-Dec-09 04:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2011-Dec-09 04:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-09 04:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.128 (still bad) 2011-Dec-09 04:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.127 (still bad) 2011-Dec-09 04:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.127 (still bad) 2011-Dec-09 04:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.129 (still bad) 2011-Dec-09 04:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.129 (still bad) 2011-Dec-09 04:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.131 (still bad) 2011-Dec-09 04:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.132 (still bad) 2011-Dec-09 04:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.133 (still bad) 2011-Dec-09 04:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.129 (still bad) 2011-Dec-09 04:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.129 (still bad) 2011-Dec-09 04:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.125 (still bad) 2011-Dec-09 04:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2011-Dec-09 04:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2011-Dec-09 04:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-09 04:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2011-Dec-09 04:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2011-Dec-09 04:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2011-Dec-09 04:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.124 (still bad) 2011-Dec-09 04:15:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-09 04:15:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.905 1.026 0.909 0.903 2011-Dec-09 04:15:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.109 0.949 1.025 1.098 2011-Dec-09 04:15:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.793 1.079 0.950 1.118 2011-Dec-09 04:15:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.121 0.026 0.975 0.027 2011-Dec-09 04:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2011-Dec-09 04:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2011-Dec-09 04:15:12 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2011-Dec-09 04:15:14 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2011-Dec-09 04:15:16 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2011-Dec-09 04:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2011-Dec-09 04:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2011-Dec-09 04:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.126 (still bad) 2011-Dec-09 04:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.124 (still bad) 2011-Dec-09 04:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.124 (still bad) 2011-Dec-09 04:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2011-Dec-09 04:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2011-Dec-09 04:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.131 (still bad) 2011-Dec-09 04:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2011-Dec-09 04:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2011-Dec-09 04:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2011-Dec-09 04:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2011-Dec-09 04:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2011-Dec-09 04:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.131 (still bad) 2011-Dec-09 04:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2011-Dec-09 04:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2011-Dec-09 04:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.125 (still bad) 2011-Dec-09 04:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2011-Dec-09 04:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2011-Dec-09 04:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.132 (still bad) 2011-Dec-09 04:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:16:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-09 04:16:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.905 1.027 0.906 0.903 2011-Dec-09 04:16:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.107 0.946 1.024 1.098 2011-Dec-09 04:16:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.790 1.078 0.946 1.117 2011-Dec-09 04:16:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.121 0.025 0.975 0.026 2011-Dec-09 04:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.130 (still bad) 2011-Dec-09 04:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2011-Dec-09 04:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-09 04:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2011-Dec-09 04:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2011-Dec-09 04:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.129 (still bad) 2011-Dec-09 04:16:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:16:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-09 04:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:16:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:16:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:16:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-09 04:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2011-Dec-09 04:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2011-Dec-09 04:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2011-Dec-09 04:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2011-Dec-09 04:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-09 04:17:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-09 04:17:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 1.024 0.907 0.901 2011-Dec-09 04:17:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.107 0.944 1.023 1.096 2011-Dec-09 04:17:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.788 1.078 0.945 1.115 2011-Dec-09 04:17:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.121 0.024 0.976 0.024 2011-Dec-09 04:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2011-Dec-09 04:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-09 04:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2011-Dec-09 04:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-09 04:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2011-Dec-09 04:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2011-Dec-09 04:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.127 (still bad) 2011-Dec-09 04:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2011-Dec-09 04:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2011-Dec-09 04:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2011-Dec-09 04:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2011-Dec-09 04:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2011-Dec-09 04:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2011-Dec-09 04:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2011-Dec-09 04:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-09 04:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-09 04:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-09 04:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2011-Dec-09 04:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-09 04:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2011-Dec-09 04:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.129 (still bad) 2011-Dec-09 04:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:18:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-09 04:18:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.911 1.036 0.915 0.908 2011-Dec-09 04:18:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.111 0.951 1.032 1.106 2011-Dec-09 04:18:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.794 1.086 0.952 1.126 2011-Dec-09 04:18:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.130 0.025 0.984 0.025 2011-Dec-09 04:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-09 04:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2011-Dec-09 04:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2011-Dec-09 04:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-09 04:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2011-Dec-09 04:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2011-Dec-09 04:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-09 04:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-09 04:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.128 (still bad) 2011-Dec-09 04:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2011-Dec-09 04:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2011-Dec-09 04:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2011-Dec-09 04:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2011-Dec-09 04:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2011-Dec-09 04:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2011-Dec-09 04:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-09 04:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-09 04:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-09 04:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:19:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-09 04:19:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.907 1.030 0.909 0.904 2011-Dec-09 04:19:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.102 0.945 1.032 1.111 2011-Dec-09 04:19:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.795 1.088 0.948 1.122 2011-Dec-09 04:19:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.122 0.025 0.977 0.025 2011-Dec-09 04:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2011-Dec-09 04:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.131 (still bad) 2011-Dec-09 04:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2011-Dec-09 04:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2011-Dec-09 04:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.131 (still bad) 2011-Dec-09 04:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.124 (still bad) 2011-Dec-09 04:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.125 (still bad) 2011-Dec-09 04:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.125 (still bad) 2011-Dec-09 04:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2011-Dec-09 04:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.124 (still bad) 2011-Dec-09 04:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.132 (still bad) 2011-Dec-09 04:20:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-09 04:20:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.908 1.033 0.915 0.907 2011-Dec-09 04:20:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.102 0.946 1.028 1.100 2011-Dec-09 04:20:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.790 1.083 0.949 1.123 2011-Dec-09 04:20:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.123 0.025 0.979 0.026 2011-Dec-09 04:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.131 (still bad) 2011-Dec-09 04:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.127 (still bad) 2011-Dec-09 04:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.125 (still bad) 2011-Dec-09 04:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.127 (still bad) 2011-Dec-09 04:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.126 (still bad) 2011-Dec-09 04:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.127 (still bad) 2011-Dec-09 04:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.136 (still bad) 2011-Dec-09 04:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.127 (still bad) 2011-Dec-09 04:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.125 (still bad) 2011-Dec-09 04:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.127 (still bad) 2011-Dec-09 04:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.126 (still bad) 2011-Dec-09 04:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.126 (still bad) 2011-Dec-09 04:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-09 04:20:47 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 15645.0 to 15646.0! 2011-Dec-09 04:20:48 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (15645.0 - 15647.0)! 2011-Dec-09 04:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.132 (still bad) 2011-Dec-09 04:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2011-Dec-09 04:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2011-Dec-09 04:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.124 (still bad) 2011-Dec-09 04:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2011-Dec-09 04:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2011-Dec-09 04:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.131 (still bad) 2011-Dec-09 04:21:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-09 04:21:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.907 1.028 0.912 0.902 2011-Dec-09 04:21:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.104 0.946 1.028 1.102 2011-Dec-09 04:21:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.793 1.080 0.948 1.121 2011-Dec-09 04:21:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.121 0.025 0.977 0.025 2011-Dec-09 04:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-09 04:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-09 04:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2011-Dec-09 04:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-09 04:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-09 04:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-09 04:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2011-Dec-09 04:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-09 04:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-09 04:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-09 04:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-09 04:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2011-Dec-09 04:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2011-Dec-09 04:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2011-Dec-09 04:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2011-Dec-09 04:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.133 (still bad) 2011-Dec-09 04:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.125 (still bad) 2011-Dec-09 04:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2011-Dec-09 04:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.127 (still bad) 2011-Dec-09 04:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.125 (still bad) 2011-Dec-09 04:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.125 (still bad) 2011-Dec-09 04:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.133 (still bad) 2011-Dec-09 04:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.125 (still bad) 2011-Dec-09 04:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.125 (still bad) 2011-Dec-09 04:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.125 (still bad) 2011-Dec-09 04:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.124 (still bad) 2011-Dec-09 04:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.124 (still bad) 2011-Dec-09 04:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:22:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-09 04:22:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.905 1.026 0.908 0.902 2011-Dec-09 04:22:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.106 0.945 1.025 1.100 2011-Dec-09 04:22:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.792 1.081 0.948 1.122 2011-Dec-09 04:22:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.122 0.025 0.978 0.025 2011-Dec-09 04:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.124 (still bad) 2011-Dec-09 04:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.123 (still bad) 2011-Dec-09 04:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.123 (still bad) 2011-Dec-09 04:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2011-Dec-09 04:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2011-Dec-09 04:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2011-Dec-09 04:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.123 (still bad) 2011-Dec-09 04:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2011-Dec-09 04:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2011-Dec-09 04:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2011-Dec-09 04:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2011-Dec-09 04:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.123 (still bad) 2011-Dec-09 04:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2011-Dec-09 04:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2011-Dec-09 04:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-09 04:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2011-Dec-09 04:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2011-Dec-09 04:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-09 04:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.125 (still bad) 2011-Dec-09 04:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.125 (still bad) 2011-Dec-09 04:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.125 (still bad) 2011-Dec-09 04:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2011-Dec-09 04:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2011-Dec-09 04:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.131 (still bad) 2011-Dec-09 04:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:23:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-09 04:23:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.905 1.026 0.910 0.904 2011-Dec-09 04:23:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.112 0.945 1.026 1.101 2011-Dec-09 04:23:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.793 1.080 0.949 1.124 2011-Dec-09 04:23:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.122 0.025 0.977 0.025 2011-Dec-09 04:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.131 (still bad) 2011-Dec-09 04:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2011-Dec-09 04:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2011-Dec-09 04:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2011-Dec-09 04:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2011-Dec-09 04:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2011-Dec-09 04:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.128 (still bad) 2011-Dec-09 04:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2011-Dec-09 04:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.130 (still bad) 2011-Dec-09 04:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.124 (still bad) 2011-Dec-09 04:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2011-Dec-09 04:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.125 (still bad) 2011-Dec-09 04:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2011-Dec-09 04:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2011-Dec-09 04:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.127 (still bad) 2011-Dec-09 04:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2011-Dec-09 04:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2011-Dec-09 04:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2011-Dec-09 04:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2011-Dec-09 04:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2011-Dec-09 04:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2011-Dec-09 04:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2011-Dec-09 04:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-09 04:24:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-09 04:24:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.909 1.032 0.910 0.906 2011-Dec-09 04:24:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.117 0.945 1.027 1.102 2011-Dec-09 04:24:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.793 1.081 0.948 1.121 2011-Dec-09 04:24:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.122 0.024 0.979 0.024 2011-Dec-09 04:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2011-Dec-09 04:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2011-Dec-09 04:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2011-Dec-09 04:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2011-Dec-09 04:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2011-Dec-09 04:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-09 04:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-09 04:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2011-Dec-09 04:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-09 04:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-09 04:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2011-Dec-09 04:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2011-Dec-09 04:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2011-Dec-09 04:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2011-Dec-09 04:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2011-Dec-09 04:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2011-Dec-09 04:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2011-Dec-09 04:25:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-09 04:25:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.904 1.028 0.907 0.900 2011-Dec-09 04:25:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.111 0.943 1.025 1.100 2011-Dec-09 04:25:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.791 1.079 0.943 1.117 2011-Dec-09 04:25:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.122 0.026 0.977 0.026 2011-Dec-09 04:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2011-Dec-09 04:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.127 (still bad) 2011-Dec-09 04:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-09 04:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.131 (still bad) 2011-Dec-09 04:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2011-Dec-09 04:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2011-Dec-09 04:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2011-Dec-09 04:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2011-Dec-09 04:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.124 (still bad) 2011-Dec-09 04:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.133 (still bad) 2011-Dec-09 04:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-09 04:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2011-Dec-09 04:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:26:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.130 (still bad) 2011-Dec-09 04:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:26:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-09 04:26:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.911 1.033 0.910 0.903 2011-Dec-09 04:26:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.111 0.943 1.026 1.101 2011-Dec-09 04:26:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.791 1.081 0.946 1.119 2011-Dec-09 04:26:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.123 0.025 0.978 0.025 2011-Dec-09 04:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.132 (still bad) 2011-Dec-09 04:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2011-Dec-09 04:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.131 (still bad) 2011-Dec-09 04:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-09 04:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-09 04:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.147 (still bad) 2011-Dec-09 04:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.149 (still bad) 2011-Dec-09 04:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.150 (still bad) 2011-Dec-09 04:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.148 (still bad) 2011-Dec-09 04:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.144 (still bad) 2011-Dec-09 04:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.139 (still bad) 2011-Dec-09 04:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2011-Dec-09 04:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.131 (still bad) 2011-Dec-09 04:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2011-Dec-09 04:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2011-Dec-09 04:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2011-Dec-09 04:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2011-Dec-09 04:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.134 (still bad) 2011-Dec-09 04:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2011-Dec-09 04:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:27:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-09 04:27:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.906 1.028 0.909 0.904 2011-Dec-09 04:27:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.104 0.944 1.027 1.104 2011-Dec-09 04:27:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.791 1.080 0.948 1.118 2011-Dec-09 04:27:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.125 0.025 0.979 0.025 2011-Dec-09 04:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.132 (still bad) 2011-Dec-09 04:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2011-Dec-09 04:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-09 04:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2011-Dec-09 04:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-09 04:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-09 04:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.134 (still bad) 2011-Dec-09 04:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2011-Dec-09 04:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.133 (still bad) 2011-Dec-09 04:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2011-Dec-09 04:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2011-Dec-09 04:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.132 (still bad) 2011-Dec-09 04:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2011-Dec-09 04:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.133 (still bad) 2011-Dec-09 04:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2011-Dec-09 04:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2011-Dec-09 04:28:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-09 04:28:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.915 1.037 0.918 0.912 2011-Dec-09 04:28:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.114 0.954 1.033 1.111 2011-Dec-09 04:28:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.798 1.089 0.955 1.130 2011-Dec-09 04:28:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.132 0.025 0.984 0.026 2011-Dec-09 04:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2011-Dec-09 04:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2011-Dec-09 04:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:28:33 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 04:28:33.300 (seconds: 16113.300)!} 2011-Dec-09 04:28:33 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 04:28:33.300 (seconds: 16113.300)! 2011-Dec-09 04:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:28:34 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 16112.0 to 16113.0! 2011-Dec-09 04:28:35 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (16112.0 - 16114.0)! 2011-Dec-09 04:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.132 (still bad) 2011-Dec-09 04:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2011-Dec-09 04:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2011-Dec-09 04:28:44 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 16-31 errors 2011-Dec-09 04:28:44 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 2-3 errors 2011-Dec-09 04:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2011-Dec-09 04:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2011-Dec-09 04:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2011-Dec-09 04:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2011-Dec-09 04:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2011-Dec-09 04:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2011-Dec-09 04:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.130 (still bad) 2011-Dec-09 04:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2011-Dec-09 04:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2011-Dec-09 04:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2011-Dec-09 04:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2011-Dec-09 04:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.128 (still bad) 2011-Dec-09 04:29:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-09 04:29:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.912 1.039 0.913 0.910 2011-Dec-09 04:29:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.112 0.957 1.029 1.107 2011-Dec-09 04:29:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.795 1.085 0.951 1.124 2011-Dec-09 04:29:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.135 0.023 0.989 0.023 2011-Dec-09 04:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.129 (still bad) 2011-Dec-09 04:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.128 (still bad) 2011-Dec-09 04:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.130 (still bad) 2011-Dec-09 04:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.129 (still bad) 2011-Dec-09 04:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.129 (still bad) 2011-Dec-09 04:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-09 04:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2011-Dec-09 04:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2011-Dec-09 04:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.128 (still bad) 2011-Dec-09 04:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2011-Dec-09 04:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2011-Dec-09 04:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.133 (still bad) 2011-Dec-09 04:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2011-Dec-09 04:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2011-Dec-09 04:29:56 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC = 128-255 errors PFB = 64-127 errors 2011-Dec-09 04:29:56 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 8-15 errors 2011-Dec-09 04:29:56 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 8-15 errors 2011-Dec-09 04:29:56 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 32-63 errors 2011-Dec-09 04:29:56 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 8-15 errors 2011-Dec-09 04:29:56 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2011-Dec-09 04:29:56 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 8-15 errors 2011-Dec-09 04:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2011-Dec-09 04:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.132 (still bad) 2011-Dec-09 04:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2011-Dec-09 04:30:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 32-63 errors 2011-Dec-09 04:30:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 128-255 errors 2011-Dec-09 04:30:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors PFB = 256-511 errors 2011-Dec-09 04:30:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 8-15 errors 2011-Dec-09 04:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2011-Dec-09 04:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.128 (still bad) 2011-Dec-09 04:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-09 04:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.129 (still bad) 2011-Dec-09 04:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.129 (still bad) 2011-Dec-09 04:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.128 (still bad) 2011-Dec-09 04:30:20 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors PFB = 64-127 errors 2011-Dec-09 04:30:20 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 128-255 errors 2011-Dec-09 04:30:20 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): ADC >= 4096 errors PFB = 64-127 errors 2011-Dec-09 04:30:20 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors PFB = 128-255 errors 2011-Dec-09 04:30:20 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 64-127 errors 2011-Dec-09 04:30:20 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 64-127 errors 2011-Dec-09 04:30:20 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 64-127 errors 2011-Dec-09 04:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2011-Dec-09 04:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.128 (still bad) 2011-Dec-09 04:30:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-09 04:30:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.923 1.050 0.916 0.910 2011-Dec-09 04:30:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.113 0.953 1.032 1.109 2011-Dec-09 04:30:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.796 1.088 0.948 1.122 2011-Dec-09 04:30:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.135 0.025 0.988 0.025 2011-Dec-09 04:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2011-Dec-09 04:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.129 (still bad) 2011-Dec-09 04:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2011-Dec-09 04:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.128 (still bad) 2011-Dec-09 04:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.129 (still bad) 2011-Dec-09 04:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.130 (still bad) 2011-Dec-09 04:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2011-Dec-09 04:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2011-Dec-09 04:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2011-Dec-09 04:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2011-Dec-09 04:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2011-Dec-09 04:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.132 (still bad) 2011-Dec-09 04:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2011-Dec-09 04:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2011-Dec-09 04:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.129 (still bad) 2011-Dec-09 04:30:56 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2011-Dec-09 04:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2011-Dec-09 04:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2011-Dec-09 04:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.134 (still bad) 2011-Dec-09 04:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.131 (still bad) 2011-Dec-09 04:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2011-Dec-09 04:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.125 (still bad) 2011-Dec-09 04:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.126 (still bad) 2011-Dec-09 04:31:21 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 128-255 errors 2011-Dec-09 04:31:21 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC = 2048-4095 errors PFB = 128-255 errors 2011-Dec-09 04:31:21 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 32-63 errors 2011-Dec-09 04:31:21 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 32-63 errors 2011-Dec-09 04:31:21 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC = 1024-2047 errors PFB = 128-255 errors 2011-Dec-09 04:31:21 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 64-127 errors 2011-Dec-09 04:31:21 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 32-63 errors 2011-Dec-09 04:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.127 (still bad) 2011-Dec-09 04:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.129 (still bad) 2011-Dec-09 04:31:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-09 04:31:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.913 1.038 0.912 0.908 2011-Dec-09 04:31:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.104 0.949 1.027 1.103 2011-Dec-09 04:31:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.795 1.086 0.955 1.131 2011-Dec-09 04:31:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.130 0.025 0.987 0.025 2011-Dec-09 04:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.130 (still bad) 2011-Dec-09 04:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.130 (still bad) 2011-Dec-09 04:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.130 (still bad) 2011-Dec-09 04:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.129 (still bad) 2011-Dec-09 04:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.130 (still bad) 2011-Dec-09 04:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.130 (still bad) 2011-Dec-09 04:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.129 (still bad) 2011-Dec-09 04:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.129 (still bad) 2011-Dec-09 04:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.130 (still bad) 2011-Dec-09 04:31:45 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 256-511 errors 2011-Dec-09 04:31:45 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): ADC = 2-3 errors PFB = 256-511 errors 2011-Dec-09 04:31:45 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors PFB = 512-1023 errors 2011-Dec-09 04:31:45 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 64-127 errors 2011-Dec-09 04:31:45 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 64-127 errors 2011-Dec-09 04:31:45 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 128-255 errors 2011-Dec-09 04:31:45 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors PFB = 256-511 errors 2011-Dec-09 04:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.129 (still bad) 2011-Dec-09 04:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.131 (still bad) 2011-Dec-09 04:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.131 (still bad) 2011-Dec-09 04:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.129 (still bad) 2011-Dec-09 04:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2011-Dec-09 04:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2011-Dec-09 04:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.129 (still bad) 2011-Dec-09 04:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2011-Dec-09 04:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2011-Dec-09 04:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:32:09 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 4-7 errors 2011-Dec-09 04:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.132 (still bad) 2011-Dec-09 04:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2011-Dec-09 04:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2011-Dec-09 04:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:32:21 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 64-127 errors 2011-Dec-09 04:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2011-Dec-09 04:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.133 (still bad) 2011-Dec-09 04:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2011-Dec-09 04:32:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-09 04:32:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.904 1.030 0.909 0.904 2011-Dec-09 04:32:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.111 0.951 1.032 1.109 2011-Dec-09 04:32:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.792 1.083 0.948 1.119 2011-Dec-09 04:32:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.123 0.025 0.978 0.025 2011-Dec-09 04:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2011-Dec-09 04:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2011-Dec-09 04:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.130 (still bad) 2011-Dec-09 04:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-09 04:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2011-Dec-09 04:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2011-Dec-09 04:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-09 04:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-09 04:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2011-Dec-09 04:32:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-09 04:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-09 04:32:54 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-09 04:32:54 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-09 04:32:54 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-09 04:32:54 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2011-Dec-09 04:32:54 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-09 04:32:54 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2011-Dec-09 04:32:54 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-09 04:32:54 LOG5 finish_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2011-Dec-09 04:32:54 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-09 04:32:54 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-09 04:32:54 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-09 04:32:54 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2011-Dec-09 04:32:54 COMMAND run_command_line: EXECUTING command 37: 'ENDIF' 2011-Dec-09 04:32:54 COMMAND run_command_line: EXECUTING command 40: 'IF LSTSLEW(AGES3193_p1_091) < 091941 THEN' 2011-Dec-09 04:32:54 LOG3 is_if_valid: Current source data: up 248.1 9.2 UP - - 119 1.9 2011-Dec-09 04:32:54 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p1_091) < 091941 2011-Dec-09 04:32:54 INFO5 is_if_valid: Condition parsed as: 9.312184666666667 < 9.3280555555555544 2011-Dec-09 04:32:54 COMMAND run_command_line: EXECUTING command 41: 'FIXEDDRIFT az=246.64 alfaangle=-47.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_091 ra=95300.00 dec=213800.00' 2011-Dec-09 04:32:54 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-09 04:32:55 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-09 04:32:55 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 246.64 -47.3 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p1_091 95300.00 213800.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-09 04:32:55 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-09 04:32:55 LOG5 begin_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2011-Dec-09 04:32:55 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p1_089' 2011-Dec-09 04:32:55 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-09 04:32:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p1_091} 2011-Dec-09 04:32:55 INFO3 fixed_driftmap: Sending telescope to Az = 246.64 and ZA = 8.61 2011-Dec-09 04:32:55 LOG3 track_source: Calling 'track_source AGES3193_p1_091 246.64 8.6126072272 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-09 04:32:55 START begin_task: Starting task 'sending tracking commands' 2011-Dec-09 04:32:55 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2011-Dec-09 04:32:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_091} INFO {Slewing to source 'AGES3193_p1_091' ...} 2011-Dec-09 04:32:55 INFO1 track_source: Starting to track AGES3193_p1_091 2011-Dec-09 04:32:55 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_091" 2011-Dec-09 04:32:55 LOG3 vw_send: To DATATAKING: set ra 246.64 2011-Dec-09 04:32:55 LOG3 vw_send: To DATATAKING: set dec 8.6126072272 2011-Dec-09 04:32:55 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-09 04:32:55 LOG3 vw_send: To DATATAKING: pnt tr 246.64 8.6126072272 -CF 2011-Dec-09 04:32:55 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-09 04:32:55 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-09 04:32:55 LOG5 finish_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2011-Dec-09 04:32:55 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-09 04:32:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:32:55 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-09 04:32:55 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2011-Dec-09 04:32:55 START begin_task: Starting task 'rotate ALFA to -47.3 degrees' 2011-Dec-09 04:32:55 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2011-Dec-09 04:32:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -47.3 degrees ...} 2011-Dec-09 04:32:55 INFO2 rotate_alfa: ALFA commanded to -47.3 degrees 2011-Dec-09 04:32:55 LOG3 sock_errsend: To ALFAMOTOR: POSITION -47.3 REPLY 2011-Dec-09 04:32:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-09 04:32:55 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-09 04:32:55 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2011-Dec-09 04:32:55 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_091" 2011-Dec-09 04:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-09 04:32:55 LOG4 got_cormsg: From DATATAKING: set ra 246.64 2011-Dec-09 04:32:55 LOG4 got_cormsg: From DATATAKING: set dec 8.6126072272 2011-Dec-09 04:32:55 LOG4 got_cormsg: From DATATAKING: vw% 246.64 2011-Dec-09 04:32:55 LOG4 got_cormsg: From DATATAKING: vw% 8.6126072272 2011-Dec-09 04:32:55 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:32:55 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-09 04:32:55 LOG4 got_cormsg: From DATATAKING: pnt tr 246.64 8.6126072272 -CF 2011-Dec-09 04:32:55 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-09 04:32:55 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-09 04:32:55 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:33:02 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-09 04:33:02 INFO3 alfa_motor: ALFA rotator in-position -47.30 degrees 2011-Dec-09 04:33:02 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-09 04:33:02 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2011-Dec-09 04:33:02 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-09 04:33:02 STOP finish_task: Finishing task 'rotate ALFA to -47.3 degrees' 2011-Dec-09 04:33:02 LOG5 finish_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2011-Dec-09 04:33:02 INFO2 finish_task: DONE finished configuration: rotating ALFA to -47.3 degrees 2011-Dec-09 04:33:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:33:02 STOP end_task: Finishing task 'rotate ALFA to -47.3 degrees' with status 'OK' 2011-Dec-09 04:33:02 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2011-Dec-09 04:33:02 START begin_task: Starting task 'waiting on telescope' 2011-Dec-09 04:33:02 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2011-Dec-09 04:33:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-09 04:33:02 LOG3 waittrk: Start waittrk 5 2011-Dec-09 04:33:02 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-09 04:33:02 LOG5 begin_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2011-Dec-09 04:33:07 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-09 04:33:07 LOG5 end_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2011-Dec-09 04:33:07 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-09 04:33:07 LOG5 begin_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2011-Dec-09 04:35:10 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-09 04:35:10 LOG5 end_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2011-Dec-09 04:35:10 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-09 04:35:10 INFO2 waittrk: Now tracking AGES3193_p1_091 2011-Dec-09 04:35:10 LOG4 waittrk: Current telescope position: Az = 246.13 ZA = 8.61 2011-Dec-09 04:35:10 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-09 04:35:10 LOG5 finish_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2011-Dec-09 04:35:10 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-09 04:35:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:35:10 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-09 04:35:10 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2011-Dec-09 04:35:10 START begin_task: Starting task 'selecting calibration type' 2011-Dec-09 04:35:10 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2011-Dec-09 04:35:10 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-09 04:35:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-09 04:35:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 04:35:10 START begin_task: Starting task 'waiting on setcal' 2011-Dec-09 04:35:10 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2011-Dec-09 04:35:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-09 04:35:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 04:35:11 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:35:11 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-09 04:35:11 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-09 04:35:11 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2011-Dec-09 04:35:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-09 04:35:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-09 04:35:11 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-09 04:35:11 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-09 04:35:11 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2011-Dec-09 04:35:11 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:35:11 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-09 04:35:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-09 04:35:11 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2011-Dec-09 04:35:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-09 04:35:11 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-09 04:35:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-09 04:35:11 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-09 04:35:11 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-09 04:35:11 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2011-Dec-09 04:35:11 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-09 04:35:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-09 04:35:11 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2011-Dec-09 04:35:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-09 04:35:11 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-09 04:35:11 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-09 04:35:11 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2011-Dec-09 04:35:11 LOG5 dopset_later: Calling 'dopset_later 32.880743298663752' 2011-Dec-09 04:35:11 INFO3 dopset_later: Setting Doppler correction for 04:35:44 (32.9 seconds from now) 2011-Dec-09 04:35:11 LOG5 antvel: Calling 'antvel 246.640000 8.612607 F Heliocentric 32.880743298663752' 2011-Dec-09 04:35:11 LOG2 antvel: Transforming current Az = 246.64 ZA = 8.61 to apparent RA = 09:53:41.5 Dec = +21:34:23.7 2011-Dec-09 04:35:11 LOG2 antvel: Parameters to Doppler: Heliocentric 30944 2011 343 0.0 2011-Dec-09 04:35:11 INFO5 antvel: Computed antenna velocity: -27.35266 km/s 2011-Dec-09 04:35:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-27.3526566269 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-09 04:35:11 INFO4 dopset_gen: New sky frequencies: 1381.369463 1381.369463 1381.369463 1381.369463 1381.369463 1381.369463 1381.369463 1381.369463 1381.369463 2011-Dec-09 04:35:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.369463 sky0=1381.369463 sky1=1381.369463 sky2=1381.369463 sky3=1381.369463 sky4=1381.369463 sky5=1381.369463 sky6=1381.369463 sky7=1381.369463 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:35:11 LOG2 dopset_gen: Result from 'sky2syn': 1631.369463 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:35:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631369463.0} 2011-Dec-09 04:35:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:35:11 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-09 04:35:11 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-09 04:35:11 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:31.5 Dec = +21:37:47.2 2011-Dec-09 04:35:11 LOG3 track_source: Calling 'track_source AGES3193_p1_091 095231.5 213747.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-09 04:35:11 START begin_task: Starting task 'sending tracking commands' 2011-Dec-09 04:35:11 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2011-Dec-09 04:35:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_091} INFO {Slewing to source 'AGES3193_p1_091' ...} 2011-Dec-09 04:35:11 INFO1 track_source: Starting to track AGES3193_p1_091 2011-Dec-09 04:35:11 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_091" 2011-Dec-09 04:35:11 LOG3 vw_send: To DATATAKING: set ra 095231.5 2011-Dec-09 04:35:11 LOG3 vw_send: To DATATAKING: set dec 213747.2 2011-Dec-09 04:35:11 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-09 04:35:11 LOG3 vw_send: To DATATAKING: pnt tr 095231.5 213747.2 -CJ 2011-Dec-09 04:35:11 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-09 04:35:11 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-09 04:35:11 LOG5 finish_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2011-Dec-09 04:35:11 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-09 04:35:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:35:12 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-09 04:35:12 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2011-Dec-09 04:35:12 START begin_task: Starting task 'waiting on telescope' 2011-Dec-09 04:35:12 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2011-Dec-09 04:35:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-09 04:35:12 LOG3 waittrk: Start waittrk 5 2011-Dec-09 04:35:12 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-09 04:35:12 LOG5 begin_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2011-Dec-09 04:35:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631369463.0} 2011-Dec-09 04:35:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:35:12 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:35:12 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_091" 2011-Dec-09 04:35:12 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:35:12 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:35:12 LOG4 got_cormsg: From DATATAKING: set ra 095231.5 2011-Dec-09 04:35:12 LOG4 got_cormsg: From DATATAKING: set dec 213747.2 2011-Dec-09 04:35:12 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-09 04:35:12 LOG4 got_cormsg: From DATATAKING: pnt tr 095231.5 213747.2 -CJ 2011-Dec-09 04:35:12 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-09 04:35:12 LOG4 got_cormsg: From DATATAKING: 095231.5 2011-Dec-09 04:35:12 LOG4 got_cormsg: From DATATAKING: vw% 213747.2 2011-Dec-09 04:35:12 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2011-Dec-09 04:35:17 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-09 04:35:17 LOG5 end_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2011-Dec-09 04:35:17 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-09 04:35:17 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2011-Dec-09 04:35:19 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-09 04:35:19 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2011-Dec-09 04:35:19 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-09 04:35:19 INFO2 waittrk: Now tracking AGES3193_p1_091 2011-Dec-09 04:35:19 LOG4 waittrk: Current telescope position: Az = 246.12 ZA = 8.60 2011-Dec-09 04:35:19 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-09 04:35:19 LOG5 finish_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2011-Dec-09 04:35:19 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-09 04:35:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:35:19 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-09 04:35:19 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2011-Dec-09 04:35:19 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-09 04:35:19 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2011-Dec-09 04:35:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-09 04:35:19 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-09 04:35:19 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-09 04:35:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-09 04:35:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 04:35:19 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-09 04:35:19 LOG5 begin_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2011-Dec-09 04:35:19 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-09 04:35:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 04:35:20 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:35:20 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-09 04:35:20 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-09 04:35:20 LOG5 end_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2011-Dec-09 04:35:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-09 04:35:21 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-09 04:35:21 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2011-Dec-09 04:35:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-09 04:35:21 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-09 04:35:21 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-09 04:35:21 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-09 04:35:21 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-09 04:35:21 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-09 04:35:21 LOG5 begin_task: Level: (5) ID = <10167> Status = 0 0 0 0 ok 2011-Dec-09 04:35:21 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:35:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-09 04:35:21 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 7 5 dB 2011-Dec-09 04:35:21 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 3 dB 2011-Dec-09 04:35:21 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 4 dB --- beam 3: 2 2 dB 2011-Dec-09 04:35:21 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2011-Dec-09 04:35:21 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-09 04:35:21 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-09 04:35:21 LOG5 end_task: Level: (5) ID = <10167> Status = 0 0 0 0 ok 2011-Dec-09 04:35:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.104 1.008 ALFA beam 1: 1.127 1.113 2011-Dec-09 04:35:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.072 0.935 ALFA beam 3: 1.001 1.067 2011-Dec-09 04:35:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.784 1.038 ALFA beam 5: 0.911 1.072 2011-Dec-09 04:35:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.083 0.014 ALFA beam 7: 0.945 0.014 2011-Dec-09 04:35:21 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-09 04:35:21 LOG5 finish_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2011-Dec-09 04:35:21 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-09 04:35:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:35:21 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-09 04:35:21 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2011-Dec-09 04:35:21 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-09 04:35:21 LOG5 begin_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2011-Dec-09 04:35:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-09 04:35:21 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-09 04:35:21 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-09 04:35:21 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-09 04:35:21 LOG5 begin_task: Level: (5) ID = <10169> Status = 0 0 0 0 ok 2011-Dec-09 04:35:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-09 04:35:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.104 1.008 1.127 1.113 2011-Dec-09 04:35:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.072 0.935 1.001 1.067 2011-Dec-09 04:35:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.784 1.038 0.911 1.072 2011-Dec-09 04:35:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 0.014 0.945 0.014 2011-Dec-09 04:35:28 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.6 27.9 B 29.4 29.5 mn:A -0.0 -0.0 B -0.4 -0.4 gn: 11 11 2011-Dec-09 04:35:28 INFO3 from_mock: From MOCK: b0s1g0 rms:A 31.9 30.6 B 30.8 32.5 mn:A 0.2 -0.6 B -0.4 0.2 gn: 12 12 2011-Dec-09 04:35:28 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.3 28.3 B 32.3 28.4 mn:A 0.7 0.6 B 0.2 0.0 gn: 7 11 2011-Dec-09 04:35:28 INFO3 from_mock: From MOCK: b1s1g0 rms:A 29.7 27.3 B 30.6 30.6 mn:A -0.2 -0.2 B 0.5 0.0 gn: 8 10 2011-Dec-09 04:35:28 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.4 30.4 B 27.5 28.8 mn:A -0.1 -0.4 B 0.3 -0.1 gn: 11 11 2011-Dec-09 04:35:28 INFO3 from_mock: From MOCK: b2s1g0 rms:A 28.5 28.8 B 31.9 29.6 mn:A 0.2 -0.3 B 0.1 0.2 gn: 11 12 2011-Dec-09 04:35:28 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.6 31.4 B 30.5 27.2 mn:A 0.4 -0.3 B 0.0 -0.3 gn: 13 12 2011-Dec-09 04:35:28 INFO3 from_mock: From MOCK: b3s1g0 rms:A 29.5 28.8 B 28.9 30.0 mn:A -0.3 0.3 B -0.0 0.1 gn: 12 12 2011-Dec-09 04:35:28 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.4 28.6 B 30.6 30.8 mn:A -0.4 -0.4 B -0.4 0.0 gn: 13 12 2011-Dec-09 04:35:28 INFO3 from_mock: From MOCK: b4s1g0 rms:A 31.4 28.4 B 29.5 28.4 mn:A -0.1 -0.0 B -0.4 0.1 gn: 16 13 2011-Dec-09 04:35:29 INFO3 from_mock: From MOCK: b5s0g0 rms:A 32.2 31.0 B 30.2 30.2 mn:A 0.4 0.5 B 0.1 0.5 gn: 13 11 2011-Dec-09 04:35:29 INFO3 from_mock: From MOCK: b5s1g0 rms:A 28.8 28.6 B 30.5 30.3 mn:A -0.3 0.3 B -0.0 0.2 gn: 12 11 2011-Dec-09 04:35:29 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.6 29.9 B 14.7 15.1 mn:A -0.3 0.1 B 0.4 -0.4 gn: 13 31 2011-Dec-09 04:35:29 INFO3 from_mock: From MOCK: b6s1g0 rms:A 29.4 26.7 B 11.7 11.3 mn:A 0.6 0.5 B 0.1 0.2 gn: 13 31 2011-Dec-09 04:35:29 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-09 04:35:29 LOG5 end_task: Level: (5) ID = <10169> Status = 0 0 0 0 ok 2011-Dec-09 04:35:29 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-09 04:35:29 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-09 04:35:29 LOG5 finish_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2011-Dec-09 04:35:29 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-09 04:35:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:35:29 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-09 04:35:29 LOG5 end_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2011-Dec-09 04:35:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-09 04:35:29 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-09 04:35:29 LOG5 finish_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2011-Dec-09 04:35:29 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-09 04:35:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:35:29 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-09 04:35:29 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2011-Dec-09 04:35:29 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 CF 2011-Dec-09 04:35:29 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 CF 2011-Dec-09 04:35:29 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 CF 2011-Dec-09 04:35:29 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 CF 2011-Dec-09 04:35:29 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-09 04:35:29 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-09 04:35:29 LOG5 begin_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2011-Dec-09 04:35:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-09 04:35:29 START begin_task: Starting task 'selecting calibration type' 2011-Dec-09 04:35:29 LOG5 begin_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2011-Dec-09 04:35:29 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-09 04:35:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-09 04:35:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 04:35:29 START begin_task: Starting task 'waiting on setcal' 2011-Dec-09 04:35:29 LOG5 begin_task: Level: (5) ID = <10172> Status = 0 0 0 0 ok 2011-Dec-09 04:35:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 CF' 2011-Dec-09 04:35:29 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-09 04:35:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 04:35:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:35:29 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-09 04:35:29 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-09 04:35:29 LOG5 end_task: Level: (5) ID = <10172> Status = 0 0 0 0 ok 2011-Dec-09 04:35:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-09 04:35:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-09 04:35:29 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-09 04:35:29 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-09 04:35:29 LOG5 begin_task: Level: (5) ID = <10173> Status = 0 0 0 0 ok 2011-Dec-09 04:35:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:35:29 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-09 04:35:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-09 04:35:29 LOG5 end_task: Level: (5) ID = <10173> Status = 0 0 0 0 ok 2011-Dec-09 04:35:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-09 04:35:29 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-09 04:35:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-09 04:35:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-09 04:35:29 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-09 04:35:29 LOG5 begin_task: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2011-Dec-09 04:35:29 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-09 04:35:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-09 04:35:29 LOG5 end_task: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2011-Dec-09 04:35:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-09 04:35:29 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-09 04:35:29 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-09 04:35:29 LOG5 end_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2011-Dec-09 04:35:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-09 04:35:29 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-09 04:35:29 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-09 04:35:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-09 04:35:30 LOG5 begin_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2011-Dec-09 04:35:30 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-09 04:35:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-09 04:35:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-09 04:35:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-09 04:35:30 LOG5 end_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2011-Dec-09 04:35:30 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-09 04:35:30 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-09 04:35:30 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2011-Dec-09 04:35:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-09 04:35:30 LOG5 log_alfabeam: Parameters: 9.8754166666666663 21.629777777777782 9.323970 2011.9396065923897 -47.300022 2011-Dec-09 04:35:30 LOG4 log_alfabeam: ALFABEAM 0 9.875416666666663 21.629777777777793 2011-Dec-09 04:35:30 LOG4 log_alfabeam: ALFABEAM 1 9.876060504732814 21.538133113525308 2011-Dec-09 04:35:30 LOG4 log_alfabeam: ALFABEAM 2 9.882242841993854 21.598777994997107 2011-Dec-09 04:35:30 LOG4 log_alfabeam: ALFABEAM 3 9.881555469599503 21.691385854283894 2011-Dec-09 04:35:30 LOG4 log_alfabeam: ALFABEAM 4 9.874697809984555 21.721550511511346 2011-Dec-09 04:35:30 LOG4 log_alfabeam: ALFABEAM 5 9.868586219751869 21.659502904270798 2011-Dec-09 04:35:30 LOG4 log_alfabeam: ALFABEAM 6 9.869261093691204 21.568689519695340 2011-Dec-09 04:35:30 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-09 04:35:30 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-09 04:35:30 LOG3 take_mock_data: PSET configuration: obsnm=CF 2011-Dec-09 04:35:30 LOG3 take_mock_data: PSET configuration: object=AGES3193_p1_091 2011-Dec-09 04:35:30 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-09 04:35:30 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-09 04:35:30 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-09 04:35:30 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-09 04:35:30 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-09 04:35:30 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-09 04:35:30 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-09 04:35:30 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-09 04:35:30 LOG3 take_mock_data: PSET configuration: patternid=134300222 2011-Dec-09 04:35:30 LOG3 take_mock_data: PSET configuration: scanid=134300223 2011-Dec-09 04:35:30 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-09 04:35:30 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-09 04:35:30 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-09 04:35:30 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456369463.0 2011-Dec-09 04:35:30 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306369463.0 2011-Dec-09 04:35:30 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-09 04:35:30 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-09 04:35:30 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=CF:object=AGES3193_p1_091:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=134300222:scanid=134300223:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456369463.0:topobfreqhz=1306369463.0:filetype=1 2011-Dec-09 04:35:30 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-09 04:35:30 LOG5 begin_task: Level: (5) ID = <10177> Status = 0 0 0 0 ok 2011-Dec-09 04:35:30 LOG4 from_mock: From MOCK: psetok 2011-Dec-09 04:35:30 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-09 04:35:30 LOG5 end_task: Level: (5) ID = <10177> Status = 0 0 0 0 ok 2011-Dec-09 04:35:30 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-09 04:35:30 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-09 04:35:30 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-09 04:35:30 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-09 04:35:30 LOG5 begin_task: Level: (5) ID = <10178> Status = 0 0 0 0 ok 2011-Dec-09 04:35:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20111209.a2048.0002.fits 2011-Dec-09 04:35:30 LOG4 from_mock: From MOCK: starok 2011-Dec-09 04:35:30 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-09 04:35:30 LOG5 end_task: Level: (5) ID = <10178> Status = 0 0 0 0 ok 2011-Dec-09 04:35:30 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-09 04:35:30 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134300223 2011-Dec-09 04:35:30 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-09 04:35:30 LOG5 begin_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2011-Dec-09 04:35:30 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111209.a2048.0002.fits} 2011-Dec-09 04:35:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:35:30 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-09 04:35:30 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-09 04:35:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-09 04:35:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30931.00 2011-Dec-09 04:35:32 INFO2 got_mock_message: Mock spectrometer start file number is 00300 2011-Dec-09 04:35:32 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-09 04:35:32 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-09 04:35:32 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-09 04:35:32 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-09 04:35:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-09 04:35:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-09 04:35:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-09 04:35:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-09 04:35:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-09 04:35:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-09 04:35:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-09 04:35:32 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-09 04:35:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:35:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:35:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:35:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:35:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:35:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:35:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:35:35 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:35:35.01 2011-Dec-09 04:35:35 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323419735.01 Fri Dec 9 04:35:35 2011 2011-Dec-09 04:35:35 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-09 04:35:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.369463 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:35:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.369463 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:35:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.369463 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:35:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.369463 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:35:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.369463 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:35:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.369463 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:35:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.369463 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:35:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.369463 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:35:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.369463 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.519 (still bad) 2011-Dec-09 04:35:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:35:41 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-09 04:35:41 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-09 04:35:41 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-09 04:35:41 LOG5 end_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2011-Dec-09 04:35:41 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-09 04:35:41 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2011-Dec-09 04:35:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-09 04:35:41 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-09 04:35:41 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-09 04:35:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-09 04:35:41 LOG5 begin_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2011-Dec-09 04:35:41 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-09 04:35:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-09 04:35:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-09 04:35:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-09 04:35:41 LOG5 end_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2011-Dec-09 04:35:41 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-09 04:35:41 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-09 04:35:41 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2011-Dec-09 04:35:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-09 04:35:41 LOG5 log_alfabeam: Parameters: 9.8754166666666663 21.629777777777782 9.327034 2011.9396069409586 -47.300022 2011-Dec-09 04:35:41 LOG4 log_alfabeam: ALFABEAM 0 9.875416666666657 21.629777777777797 2011-Dec-09 04:35:41 LOG4 log_alfabeam: ALFABEAM 1 9.876073784498566 21.538152019304956 2011-Dec-09 04:35:41 LOG4 log_alfabeam: ALFABEAM 2 9.882247381763968 21.598970183040148 2011-Dec-09 04:35:41 LOG4 log_alfabeam: ALFABEAM 3 9.881546351333569 21.691562456885201 2011-Dec-09 04:35:41 LOG4 log_alfabeam: ALFABEAM 4 9.874684141113814 21.721530065153853 2011-Dec-09 04:35:41 LOG4 log_alfabeam: ALFABEAM 5 9.868581868810242 21.659304821943639 2011-Dec-09 04:35:41 LOG4 log_alfabeam: ALFABEAM 6 9.869270030211563 21.568515153215024 2011-Dec-09 04:35:41 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-09 04:35:41 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-09 04:35:41 LOG3 take_mock_data: PSET configuration: obsnm=CF 2011-Dec-09 04:35:41 LOG3 take_mock_data: PSET configuration: object=AGES3193_p1_091 2011-Dec-09 04:35:41 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-09 04:35:41 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-09 04:35:41 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-09 04:35:41 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-09 04:35:41 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-09 04:35:41 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-09 04:35:41 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-09 04:35:41 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-09 04:35:41 LOG3 take_mock_data: PSET configuration: patternid=134300222 2011-Dec-09 04:35:41 LOG3 take_mock_data: PSET configuration: scanid=134300224 2011-Dec-09 04:35:41 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-09 04:35:41 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-09 04:35:41 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-09 04:35:41 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456369463.0 2011-Dec-09 04:35:41 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306369463.0 2011-Dec-09 04:35:41 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-09 04:35:41 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-09 04:35:41 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=CF:object=AGES3193_p1_091:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=134300222:scanid=134300224:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456369463.0:topobfreqhz=1306369463.0:filetype=1 2011-Dec-09 04:35:41 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-09 04:35:41 LOG5 begin_task: Level: (5) ID = <10182> Status = 0 0 0 0 ok 2011-Dec-09 04:35:41 LOG4 from_mock: From MOCK: psetok 2011-Dec-09 04:35:41 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-09 04:35:41 LOG5 end_task: Level: (5) ID = <10182> Status = 0 0 0 0 ok 2011-Dec-09 04:35:41 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-09 04:35:41 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-09 04:35:41 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-09 04:35:41 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-09 04:35:41 LOG5 begin_task: Level: (5) ID = <10183> Status = 0 0 0 0 ok 2011-Dec-09 04:35:41 LOG4 from_mock: From MOCK: starok 2011-Dec-09 04:35:41 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-09 04:35:41 LOG5 end_task: Level: (5) ID = <10183> Status = 0 0 0 0 ok 2011-Dec-09 04:35:41 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-09 04:35:41 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134300224 2011-Dec-09 04:35:41 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-09 04:35:41 LOG5 begin_task: Level: (5) ID = <10184> Status = 0 0 0 0 ok 2011-Dec-09 04:35:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:35:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-09 04:35:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30942.00 2011-Dec-09 04:35:42 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-09 04:35:42 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-09 04:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.535 (still bad) 2011-Dec-09 04:35:44 INFO2 got_mock_message: Mock spectrometer start file number is 00400 2011-Dec-09 04:35:44 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-09 04:35:44 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-09 04:35:44 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-09 04:35:44 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-09 04:35:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-09 04:35:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-09 04:35:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-09 04:35:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-09 04:35:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-09 04:35:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-09 04:35:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-09 04:35:44 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-09 04:35:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:35:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:35:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:35:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:35:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:35:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:35:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:35:47 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:35:47.02 2011-Dec-09 04:35:47 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323419747.02 Fri Dec 9 04:35:47 2011 2011-Dec-09 04:35:47 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-09 04:35:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.369463 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:35:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.369463 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:35:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.369463 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:35:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.369463 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:35:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.369463 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:35:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.369463 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:35:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.369463 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:35:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.369463 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:35:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.369463 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:35:47 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-09 04:35:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-09 04:35:53 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-09 04:35:53 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-09 04:35:53 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-09 04:35:53 LOG5 end_task: Level: (5) ID = <10184> Status = 0 0 0 0 ok 2011-Dec-09 04:35:53 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-09 04:35:53 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2011-Dec-09 04:35:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-09 04:35:53 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-09 04:35:53 LOG5 finish_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2011-Dec-09 04:35:53 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-09 04:35:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:35:53 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-09 04:35:53 LOG5 end_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2011-Dec-09 04:35:53 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-09 04:35:53 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 246.64 and ZA = 8.61 2011-Dec-09 04:35:53 LOG3 track_source: Calling 'track_source AGES3193_p1_091 246.64 8.6126072272 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-09 04:35:53 START begin_task: Starting task 'sending tracking commands' 2011-Dec-09 04:35:53 LOG5 begin_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2011-Dec-09 04:35:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_091} INFO {Slewing to source 'AGES3193_p1_091' ...} 2011-Dec-09 04:35:53 INFO1 track_source: Starting to track AGES3193_p1_091 2011-Dec-09 04:35:53 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_091" 2011-Dec-09 04:35:53 LOG3 vw_send: To DATATAKING: set ra 246.64 2011-Dec-09 04:35:53 LOG3 vw_send: To DATATAKING: set dec 8.6126072272 2011-Dec-09 04:35:53 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-09 04:35:53 LOG3 vw_send: To DATATAKING: pnt tr 246.64 8.6126072272 -CF 2011-Dec-09 04:35:53 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-09 04:35:53 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-09 04:35:53 LOG5 finish_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2011-Dec-09 04:35:53 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-09 04:35:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:35:53 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-09 04:35:53 LOG5 end_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2011-Dec-09 04:35:53 LOG1 fixed_driftmap: Parameters: HA = -00:34:00.3 Start = 09:19:41.2 LST = 09:19:49.4 diff = -8.1 secs 2011-Dec-09 04:35:53 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2011-Dec-09 04:35:53 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-09 04:35:53 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-09 04:35:53 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-09 04:35:53 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-09 04:35:53 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-09 04:35:53 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2011-Dec-09 04:35:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-09 04:35:53 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-09 04:35:53 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-09 04:35:53 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-09 04:35:53 LOG3 take_mock_data: PSET configuration: obsnm=CF 2011-Dec-09 04:35:53 LOG3 take_mock_data: PSET configuration: object=AGES3193_p1_091 2011-Dec-09 04:35:53 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-09 04:35:53 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-09 04:35:53 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-09 04:35:53 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-09 04:35:53 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-09 04:35:53 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-09 04:35:53 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-09 04:35:53 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-09 04:35:53 LOG3 take_mock_data: PSET configuration: patternid=134300225 2011-Dec-09 04:35:53 LOG3 take_mock_data: PSET configuration: scanid=134300225 2011-Dec-09 04:35:53 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-09 04:35:53 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-09 04:35:53 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-09 04:35:53 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456369463.0 2011-Dec-09 04:35:53 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306369463.0 2011-Dec-09 04:35:53 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-09 04:35:53 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-09 04:35:53 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=CF:object=AGES3193_p1_091:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=134300225:scanid=134300225:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456369463.0:topobfreqhz=1306369463.0:filetype=1 2011-Dec-09 04:35:53 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-09 04:35:53 LOG5 begin_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2011-Dec-09 04:35:53 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_091" 2011-Dec-09 04:35:53 LOG4 got_cormsg: From DATATAKING: set ra 246.64 2011-Dec-09 04:35:53 LOG4 from_mock: From MOCK: psetok 2011-Dec-09 04:35:53 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-09 04:35:53 LOG5 end_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2011-Dec-09 04:35:53 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-09 04:35:53 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-09 04:35:53 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-09 04:35:53 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-09 04:35:53 LOG5 begin_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2011-Dec-09 04:35:53 LOG4 got_cormsg: From DATATAKING: set dec 8.6126072272 2011-Dec-09 04:35:53 LOG4 got_cormsg: From DATATAKING: vw% 246.64 2011-Dec-09 04:35:53 LOG4 from_mock: From MOCK: starok 2011-Dec-09 04:35:53 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-09 04:35:53 LOG5 end_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2011-Dec-09 04:35:53 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-09 04:35:53 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 134300225 2011-Dec-09 04:35:54 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-09 04:35:54 LOG5 begin_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2011-Dec-09 04:35:54 LOG4 got_cormsg: From DATATAKING: vw% 8.6126072272 2011-Dec-09 04:35:54 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-09 04:35:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:35:54 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:35:54 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-09 04:35:54 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-09 04:35:54 LOG4 got_cormsg: From DATATAKING: pnt tr 246.64 8.6126072272 -CF 2011-Dec-09 04:35:54 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-09 04:35:54 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-09 04:35:54 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:35:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-09 04:35:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30955.00 2011-Dec-09 04:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.135 (still bad) 2011-Dec-09 04:35:56 INFO2 got_mock_message: Mock spectrometer start file number is 00500 2011-Dec-09 04:35:56 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-09 04:35:56 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2011-Dec-09 04:35:56 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-09 04:35:56 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-09 04:35:56 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-09 04:35:56 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-09 04:35:56 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-09 04:35:56 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-09 04:35:56 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-09 04:35:56 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-09 04:35:56 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-09 04:35:56 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-09 04:35:56 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 04:35:56 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 04:35:56 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 04:35:56 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 04:35:56 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 04:35:56 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 04:35:56 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 04:35:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.369463 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:35:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.369463 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:35:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.369463 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:35:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.369463 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:35:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.369463 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:35:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.369463 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:35:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.369463 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:35:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.369463 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:35:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.369463 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:35:57 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2011-Dec-09 04:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-09 04:35:59 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:35:59.02 2011-Dec-09 04:35:59 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323419759.02 Fri Dec 9 04:35:59 2011 2011-Dec-09 04:35:59 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-09 04:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2011-Dec-09 04:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-09 04:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-09 04:36:05 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2011-Dec-09 04:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-09 04:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-09 04:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.134 (still bad) 2011-Dec-09 04:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2011-Dec-09 04:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-09 04:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.132 (still bad) 2011-Dec-09 04:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.136 (still bad) 2011-Dec-09 04:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.133 (still bad) 2011-Dec-09 04:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-09 04:36:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-09 04:36:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.117 1.013 1.141 1.124 2011-Dec-09 04:36:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 0.940 1.010 1.080 2011-Dec-09 04:36:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.789 1.046 0.913 1.077 2011-Dec-09 04:36:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 0.025 0.953 0.025 2011-Dec-09 04:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.134 (still bad) 2011-Dec-09 04:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.134 (still bad) 2011-Dec-09 04:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-09 04:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.134 (still bad) 2011-Dec-09 04:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2011-Dec-09 04:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2011-Dec-09 04:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.136 (still bad) 2011-Dec-09 04:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2011-Dec-09 04:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2011-Dec-09 04:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.136 (still bad) 2011-Dec-09 04:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.144 (still bad) 2011-Dec-09 04:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-09 04:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-09 04:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.138 (still bad) 2011-Dec-09 04:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.133 (still bad) 2011-Dec-09 04:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-09 04:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2011-Dec-09 04:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-09 04:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.133 (still bad) 2011-Dec-09 04:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.136 (still bad) 2011-Dec-09 04:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-09 04:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-09 04:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2011-Dec-09 04:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.136 (still bad) 2011-Dec-09 04:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.132 (still bad) 2011-Dec-09 04:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.136 (still bad) 2011-Dec-09 04:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2011-Dec-09 04:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2011-Dec-09 04:37:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-09 04:37:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.109 1.012 1.135 1.119 2011-Dec-09 04:37:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 0.942 1.011 1.079 2011-Dec-09 04:37:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.789 1.048 0.924 1.089 2011-Dec-09 04:37:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.089 0.025 0.948 0.025 2011-Dec-09 04:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.134 (still bad) 2011-Dec-09 04:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.133 (still bad) 2011-Dec-09 04:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.134 (still bad) 2011-Dec-09 04:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.134 (still bad) 2011-Dec-09 04:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.133 (still bad) 2011-Dec-09 04:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-09 04:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.133 (still bad) 2011-Dec-09 04:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-09 04:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.133 (still bad) 2011-Dec-09 04:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-09 04:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2011-Dec-09 04:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.136 (still bad) 2011-Dec-09 04:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.136 (still bad) 2011-Dec-09 04:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2011-Dec-09 04:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2011-Dec-09 04:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2011-Dec-09 04:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.137 (still bad) 2011-Dec-09 04:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-09 04:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-09 04:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.137 (still bad) 2011-Dec-09 04:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.137 (still bad) 2011-Dec-09 04:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.139 (still bad) 2011-Dec-09 04:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.137 (still bad) 2011-Dec-09 04:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.136 (still bad) 2011-Dec-09 04:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.136 (still bad) 2011-Dec-09 04:38:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-09 04:38:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.111 1.013 1.138 1.117 2011-Dec-09 04:38:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 0.933 1.007 1.074 2011-Dec-09 04:38:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 1.044 0.918 1.078 2011-Dec-09 04:38:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.090 0.026 0.949 0.026 2011-Dec-09 04:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.137 (still bad) 2011-Dec-09 04:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2011-Dec-09 04:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.136 (still bad) 2011-Dec-09 04:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2011-Dec-09 04:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2011-Dec-09 04:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.136 (still bad) 2011-Dec-09 04:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2011-Dec-09 04:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.137 (still bad) 2011-Dec-09 04:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.136 (still bad) 2011-Dec-09 04:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.134 (still bad) 2011-Dec-09 04:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.137 (still bad) 2011-Dec-09 04:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2011-Dec-09 04:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2011-Dec-09 04:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2011-Dec-09 04:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.134 (still bad) 2011-Dec-09 04:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.134 (still bad) 2011-Dec-09 04:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-09 04:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.134 (still bad) 2011-Dec-09 04:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.134 (still bad) 2011-Dec-09 04:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-09 04:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.134 (still bad) 2011-Dec-09 04:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.134 (still bad) 2011-Dec-09 04:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.143 (still bad) 2011-Dec-09 04:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.136 (still bad) 2011-Dec-09 04:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2011-Dec-09 04:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.137 (still bad) 2011-Dec-09 04:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2011-Dec-09 04:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.136 (still bad) 2011-Dec-09 04:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.144 (still bad) 2011-Dec-09 04:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2011-Dec-09 04:39:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2011-Dec-09 04:39:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.109 1.010 1.136 1.118 2011-Dec-09 04:39:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.073 0.934 1.004 1.070 2011-Dec-09 04:39:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.787 1.042 0.914 1.078 2011-Dec-09 04:39:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.087 0.028 0.948 0.028 2011-Dec-09 04:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2011-Dec-09 04:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-09 04:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.138 (still bad) 2011-Dec-09 04:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.142 (still bad) 2011-Dec-09 04:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2011-Dec-09 04:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.134 (still bad) 2011-Dec-09 04:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.136 (still bad) 2011-Dec-09 04:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.134 (still bad) 2011-Dec-09 04:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.134 (still bad) 2011-Dec-09 04:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2011-Dec-09 04:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2011-Dec-09 04:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-09 04:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2011-Dec-09 04:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2011-Dec-09 04:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2011-Dec-09 04:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-09 04:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.134 (still bad) 2011-Dec-09 04:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-09 04:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-09 04:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-09 04:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.141 (still bad) 2011-Dec-09 04:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-09 04:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2011-Dec-09 04:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2011-Dec-09 04:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.132 (still bad) 2011-Dec-09 04:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.134 (still bad) 2011-Dec-09 04:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-09 04:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:40:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-09 04:40:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.111 1.013 1.135 1.118 2011-Dec-09 04:40:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.073 0.936 1.006 1.072 2011-Dec-09 04:40:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 1.041 0.916 1.077 2011-Dec-09 04:40:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.087 0.025 0.948 0.026 2011-Dec-09 04:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-09 04:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.133 (still bad) 2011-Dec-09 04:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-09 04:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-09 04:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-09 04:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.134 (still bad) 2011-Dec-09 04:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.134 (still bad) 2011-Dec-09 04:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.133 (still bad) 2011-Dec-09 04:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-09 04:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.140 (still bad) 2011-Dec-09 04:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.132 (still bad) 2011-Dec-09 04:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.131 (still bad) 2011-Dec-09 04:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2011-Dec-09 04:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.133 (still bad) 2011-Dec-09 04:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2011-Dec-09 04:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-09 04:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.134 (still bad) 2011-Dec-09 04:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.133 (still bad) 2011-Dec-09 04:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-09 04:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.134 (still bad) 2011-Dec-09 04:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-09 04:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.140 (still bad) 2011-Dec-09 04:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.134 (still bad) 2011-Dec-09 04:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.133 (still bad) 2011-Dec-09 04:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-09 04:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.134 (still bad) 2011-Dec-09 04:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-09 04:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.141 (still bad) 2011-Dec-09 04:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.133 (still bad) 2011-Dec-09 04:41:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-09 04:41:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.110 1.013 1.133 1.117 2011-Dec-09 04:41:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.073 0.936 1.009 1.074 2011-Dec-09 04:41:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.789 1.048 0.915 1.076 2011-Dec-09 04:41:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.087 0.026 0.947 0.026 2011-Dec-09 04:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2011-Dec-09 04:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.134 (still bad) 2011-Dec-09 04:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.136 (still bad) 2011-Dec-09 04:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.140 (still bad) 2011-Dec-09 04:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.134 (still bad) 2011-Dec-09 04:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.132 (still bad) 2011-Dec-09 04:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-09 04:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.134 (still bad) 2011-Dec-09 04:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2011-Dec-09 04:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-09 04:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.134 (still bad) 2011-Dec-09 04:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.134 (still bad) 2011-Dec-09 04:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.133 (still bad) 2011-Dec-09 04:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-09 04:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.141 (still bad) 2011-Dec-09 04:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.133 (still bad) 2011-Dec-09 04:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.133 (still bad) 2011-Dec-09 04:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-09 04:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.131 (still bad) 2011-Dec-09 04:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.133 (still bad) 2011-Dec-09 04:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2011-Dec-09 04:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.134 (still bad) 2011-Dec-09 04:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.133 (still bad) 2011-Dec-09 04:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-09 04:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2011-Dec-09 04:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.134 (still bad) 2011-Dec-09 04:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-09 04:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.135 (still bad) 2011-Dec-09 04:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2011-Dec-09 04:42:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-09 04:42:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.111 1.013 1.134 1.119 2011-Dec-09 04:42:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 0.937 1.008 1.073 2011-Dec-09 04:42:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.791 1.049 0.916 1.076 2011-Dec-09 04:42:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.089 0.022 0.949 0.023 2011-Dec-09 04:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.135 (still bad) 2011-Dec-09 04:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2011-Dec-09 04:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-09 04:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-09 04:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.133 (still bad) 2011-Dec-09 04:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-09 04:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-09 04:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-09 04:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-09 04:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.134 (still bad) 2011-Dec-09 04:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-09 04:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-09 04:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-09 04:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-09 04:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-09 04:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-09 04:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-09 04:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-09 04:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-09 04:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-09 04:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.139 (still bad) 2011-Dec-09 04:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-09 04:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-09 04:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-09 04:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-09 04:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-09 04:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-09 04:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-09 04:43:32 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 04:43:32.303 (seconds: 17012.303)!} 2011-Dec-09 04:43:32 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 04:43:32.303 (seconds: 17012.303)! 2011-Dec-09 04:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-09 04:43:33 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 17011.0 to 17012.0! 2011-Dec-09 04:43:34 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (17011.0 - 17013.0)! 2011-Dec-09 04:43:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-09 04:43:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.111 1.012 1.139 1.127 2011-Dec-09 04:43:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.077 0.938 1.008 1.073 2011-Dec-09 04:43:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.787 1.044 0.914 1.075 2011-Dec-09 04:43:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.092 0.023 0.951 0.023 2011-Dec-09 04:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.140 (still bad) 2011-Dec-09 04:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.141 (still bad) 2011-Dec-09 04:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.141 (still bad) 2011-Dec-09 04:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-09 04:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-09 04:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-09 04:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-09 04:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-09 04:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-09 04:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-09 04:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-09 04:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-09 04:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-09 04:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-09 04:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-09 04:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-09 04:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-09 04:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-09 04:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.144 (still bad) 2011-Dec-09 04:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-09 04:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-09 04:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-09 04:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-09 04:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-09 04:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.139 (still bad) 2011-Dec-09 04:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-09 04:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2011-Dec-09 04:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-09 04:44:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-09 04:44:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.112 1.015 1.137 1.122 2011-Dec-09 04:44:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.072 0.938 1.010 1.075 2011-Dec-09 04:44:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.791 1.050 0.914 1.077 2011-Dec-09 04:44:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.090 0.024 0.948 0.024 2011-Dec-09 04:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-09 04:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.139 (still bad) 2011-Dec-09 04:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-09 04:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-09 04:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-09 04:44:47 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 8-15 errors 2011-Dec-09 04:44:47 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 2-3 errors 2011-Dec-09 04:44:47 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 16-31 errors 2011-Dec-09 04:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-09 04:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-09 04:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-09 04:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-09 04:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-09 04:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-09 04:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-09 04:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-09 04:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-09 04:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-09 04:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-09 04:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-09 04:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-09 04:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-09 04:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-09 04:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-09 04:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.140 (still bad) 2011-Dec-09 04:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-09 04:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-09 04:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-09 04:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.141 (still bad) 2011-Dec-09 04:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.139 (still bad) 2011-Dec-09 04:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-09 04:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.140 (still bad) 2011-Dec-09 04:45:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-09 04:45:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.112 1.012 1.138 1.121 2011-Dec-09 04:45:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.071 0.938 1.009 1.074 2011-Dec-09 04:45:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.790 1.047 0.916 1.078 2011-Dec-09 04:45:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.088 0.024 0.949 0.025 2011-Dec-09 04:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-09 04:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-09 04:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-09 04:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-09 04:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-09 04:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2011-Dec-09 04:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.139 (still bad) 2011-Dec-09 04:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.140 (still bad) 2011-Dec-09 04:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.139 (still bad) 2011-Dec-09 04:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-09 04:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.139 (still bad) 2011-Dec-09 04:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2011-Dec-09 04:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2011-Dec-09 04:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.140 (still bad) 2011-Dec-09 04:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.139 (still bad) 2011-Dec-09 04:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2011-Dec-09 04:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.139 (still bad) 2011-Dec-09 04:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.143 (still bad) 2011-Dec-09 04:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2011-Dec-09 04:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-09 04:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-09 04:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-09 04:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.133 (still bad) 2011-Dec-09 04:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.140 (still bad) 2011-Dec-09 04:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-09 04:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-09 04:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-09 04:46:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-09 04:46:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.113 1.018 1.140 1.123 2011-Dec-09 04:46:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.077 0.940 1.011 1.078 2011-Dec-09 04:46:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.791 1.050 0.919 1.082 2011-Dec-09 04:46:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.093 0.025 0.953 0.025 2011-Dec-09 04:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-09 04:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-09 04:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-09 04:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-09 04:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-09 04:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.140 (still bad) 2011-Dec-09 04:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.140 (still bad) 2011-Dec-09 04:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-09 04:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-09 04:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.134 (still bad) 2011-Dec-09 04:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2011-Dec-09 04:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-09 04:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-09 04:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-09 04:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-09 04:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.134 (still bad) 2011-Dec-09 04:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.133 (still bad) 2011-Dec-09 04:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-09 04:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-09 04:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-09 04:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-09 04:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2011-Dec-09 04:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2011-Dec-09 04:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.143 (still bad) 2011-Dec-09 04:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.134 (still bad) 2011-Dec-09 04:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-09 04:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-09 04:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-09 04:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.140 (still bad) 2011-Dec-09 04:47:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-09 04:47:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.119 1.022 1.143 1.129 2011-Dec-09 04:47:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 0.943 1.016 1.083 2011-Dec-09 04:47:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.789 1.046 0.919 1.083 2011-Dec-09 04:47:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.099 0.023 0.958 0.024 2011-Dec-09 04:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-09 04:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-09 04:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.140 (still bad) 2011-Dec-09 04:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-09 04:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-09 04:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.144 (still bad) 2011-Dec-09 04:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-09 04:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-09 04:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-09 04:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.134 (still bad) 2011-Dec-09 04:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-09 04:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.141 (still bad) 2011-Dec-09 04:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-09 04:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.133 (still bad) 2011-Dec-09 04:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2011-Dec-09 04:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-09 04:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-09 04:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-09 04:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-09 04:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.134 (still bad) 2011-Dec-09 04:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.134 (still bad) 2011-Dec-09 04:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-09 04:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.134 (still bad) 2011-Dec-09 04:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-09 04:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-09 04:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-09 04:48:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-09 04:48:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.122 1.022 1.142 1.128 2011-Dec-09 04:48:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 0.944 1.024 1.093 2011-Dec-09 04:48:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.793 1.053 0.927 1.088 2011-Dec-09 04:48:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 0.026 0.956 0.026 2011-Dec-09 04:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2011-Dec-09 04:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.134 (still bad) 2011-Dec-09 04:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.137 (still bad) 2011-Dec-09 04:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2011-Dec-09 04:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.136 (still bad) 2011-Dec-09 04:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.142 (still bad) 2011-Dec-09 04:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.134 (still bad) 2011-Dec-09 04:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.134 (still bad) 2011-Dec-09 04:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.138 (still bad) 2011-Dec-09 04:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2011-Dec-09 04:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.136 (still bad) 2011-Dec-09 04:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-09 04:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-09 04:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-09 04:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-09 04:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-09 04:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.139 (still bad) 2011-Dec-09 04:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-09 04:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-09 04:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-09 04:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-09 04:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-09 04:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2011-Dec-09 04:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.145 (still bad) 2011-Dec-09 04:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.145 (still bad) 2011-Dec-09 04:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.145 (still bad) 2011-Dec-09 04:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.149 (still bad) 2011-Dec-09 04:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.147 (still bad) 2011-Dec-09 04:49:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.148 (still bad) 2011-Dec-09 04:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.147 (still bad) 2011-Dec-09 04:49:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-09 04:49:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.111 1.015 1.143 1.129 2011-Dec-09 04:49:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 0.935 1.006 1.076 2011-Dec-09 04:49:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.790 1.046 0.921 1.083 2011-Dec-09 04:49:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.088 0.024 0.947 0.024 2011-Dec-09 04:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.141 (still bad) 2011-Dec-09 04:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2011-Dec-09 04:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-09 04:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-09 04:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-09 04:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-09 04:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-09 04:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-09 04:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2011-Dec-09 04:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-09 04:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-09 04:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-09 04:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.134 (still bad) 2011-Dec-09 04:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-09 04:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2011-Dec-09 04:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2011-Dec-09 04:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.140 (still bad) 2011-Dec-09 04:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-09 04:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-09 04:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-09 04:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-09 04:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.142 (still bad) 2011-Dec-09 04:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2011-Dec-09 04:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2011-Dec-09 04:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2011-Dec-09 04:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2011-Dec-09 04:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.138 (still bad) 2011-Dec-09 04:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-09 04:50:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-09 04:50:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.111 1.014 1.136 1.122 2011-Dec-09 04:50:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.073 0.938 1.009 1.076 2011-Dec-09 04:50:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.789 1.049 0.916 1.079 2011-Dec-09 04:50:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.088 0.025 0.947 0.025 2011-Dec-09 04:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-09 04:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-09 04:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-09 04:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-09 04:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-09 04:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-09 04:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-09 04:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-09 04:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.140 (still bad) 2011-Dec-09 04:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-09 04:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-09 04:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-09 04:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-09 04:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.140 (still bad) 2011-Dec-09 04:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-09 04:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-09 04:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-09 04:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-09 04:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.140 (still bad) 2011-Dec-09 04:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.142 (still bad) 2011-Dec-09 04:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.142 (still bad) 2011-Dec-09 04:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.142 (still bad) 2011-Dec-09 04:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.143 (still bad) 2011-Dec-09 04:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.142 (still bad) 2011-Dec-09 04:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.144 (still bad) 2011-Dec-09 04:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.144 (still bad) 2011-Dec-09 04:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.146 (still bad) 2011-Dec-09 04:51:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-09 04:51:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.114 1.018 1.147 1.136 2011-Dec-09 04:51:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.079 0.939 1.008 1.076 2011-Dec-09 04:51:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.787 1.046 0.918 1.081 2011-Dec-09 04:51:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.090 0.024 0.950 0.024 2011-Dec-09 04:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.151 (still bad) 2011-Dec-09 04:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.154 (still bad) 2011-Dec-09 04:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.157 (still bad) 2011-Dec-09 04:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.162 (still bad) 2011-Dec-09 04:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.163 (still bad) 2011-Dec-09 04:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.161 (still bad) 2011-Dec-09 04:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.159 (still bad) 2011-Dec-09 04:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.155 (still bad) 2011-Dec-09 04:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.152 (still bad) 2011-Dec-09 04:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.148 (still bad) 2011-Dec-09 04:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.142 (still bad) 2011-Dec-09 04:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.141 (still bad) 2011-Dec-09 04:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.140 (still bad) 2011-Dec-09 04:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.138 (still bad) 2011-Dec-09 04:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2011-Dec-09 04:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-09 04:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.139 (still bad) 2011-Dec-09 04:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-09 04:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-09 04:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-09 04:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.140 (still bad) 2011-Dec-09 04:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.145 (still bad) 2011-Dec-09 04:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.140 (still bad) 2011-Dec-09 04:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-09 04:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.140 (still bad) 2011-Dec-09 04:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.145 (still bad) 2011-Dec-09 04:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.140 (still bad) 2011-Dec-09 04:52:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-09 04:52:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.119 1.024 1.140 1.124 2011-Dec-09 04:52:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 0.939 1.012 1.081 2011-Dec-09 04:52:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.791 1.048 0.919 1.082 2011-Dec-09 04:52:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.092 0.023 0.951 0.024 2011-Dec-09 04:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.141 (still bad) 2011-Dec-09 04:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.138 (still bad) 2011-Dec-09 04:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.140 (still bad) 2011-Dec-09 04:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.145 (still bad) 2011-Dec-09 04:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-09 04:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-09 04:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-09 04:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-09 04:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-09 04:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-09 04:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-09 04:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-09 04:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-09 04:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-09 04:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-09 04:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2011-Dec-09 04:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2011-Dec-09 04:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.136 (still bad) 2011-Dec-09 04:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.140 (still bad) 2011-Dec-09 04:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2011-Dec-09 04:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2011-Dec-09 04:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.146 (still bad) 2011-Dec-09 04:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.140 (still bad) 2011-Dec-09 04:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.139 (still bad) 2011-Dec-09 04:53:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-09 04:53:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.113 1.016 1.139 1.124 2011-Dec-09 04:53:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 0.940 1.014 1.081 2011-Dec-09 04:53:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.791 1.049 0.930 1.095 2011-Dec-09 04:53:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.091 0.024 0.950 0.024 2011-Dec-09 04:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-09 04:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-09 04:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.145 (still bad) 2011-Dec-09 04:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-09 04:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-09 04:53:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-09 04:54:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-09 04:54:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-09 04:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-09 04:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2011-Dec-09 04:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-09 04:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2011-Dec-09 04:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2011-Dec-09 04:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-09 04:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2011-Dec-09 04:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-09 04:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-09 04:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-09 04:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.141 (still bad) 2011-Dec-09 04:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-09 04:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-09 04:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-09 04:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-09 04:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2011-Dec-09 04:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-09 04:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-09 04:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-09 04:54:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-09 04:54:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.109 1.015 1.134 1.122 2011-Dec-09 04:54:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 0.937 1.009 1.076 2011-Dec-09 04:54:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.790 1.047 0.929 1.093 2011-Dec-09 04:54:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.091 0.025 0.951 0.025 2011-Dec-09 04:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-09 04:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.136 (still bad) 2011-Dec-09 04:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.137 (still bad) 2011-Dec-09 04:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.137 (still bad) 2011-Dec-09 04:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.136 (still bad) 2011-Dec-09 04:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.139 (still bad) 2011-Dec-09 04:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.140 (still bad) 2011-Dec-09 04:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-09 04:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-09 04:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2011-Dec-09 04:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2011-Dec-09 04:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2011-Dec-09 04:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-09 04:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2011-Dec-09 04:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2011-Dec-09 04:55:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2011-Dec-09 04:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-09 04:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2011-Dec-09 04:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2011-Dec-09 04:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2011-Dec-09 04:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2011-Dec-09 04:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2011-Dec-09 04:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.139 (still bad) 2011-Dec-09 04:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.138 (still bad) 2011-Dec-09 04:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.143 (still bad) 2011-Dec-09 04:55:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-09 04:55:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.111 1.016 1.143 1.129 2011-Dec-09 04:55:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 0.938 1.009 1.076 2011-Dec-09 04:55:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.792 1.050 0.918 1.081 2011-Dec-09 04:55:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.090 0.026 0.950 0.026 2011-Dec-09 04:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.147 (still bad) 2011-Dec-09 04:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.152 (still bad) 2011-Dec-09 04:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.147 (still bad) 2011-Dec-09 04:55:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.147 (still bad) 2011-Dec-09 04:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.147 (still bad) 2011-Dec-09 04:56:00 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-09 04:56:00 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-09 04:56:00 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-09 04:56:00 LOG5 end_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2011-Dec-09 04:56:00 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-09 04:56:00 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2011-Dec-09 04:56:00 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-09 04:56:00 LOG5 finish_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2011-Dec-09 04:56:00 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-09 04:56:00 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-09 04:56:00 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-09 04:56:00 LOG5 end_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2011-Dec-09 04:56:00 COMMAND run_command_line: EXECUTING command 44: 'ENDIF' 2011-Dec-09 04:56:00 COMMAND run_command_line: EXECUTING command 47: 'IF LSTSLEW(AGES3193_p1_093) < 094241 THEN' 2011-Dec-09 04:56:00 LOG3 is_if_valid: Current source data: up 224.8 4.5 UP - - 96 1.7 2011-Dec-09 04:56:00 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p1_093) < 094241 2011-Dec-09 04:56:00 INFO5 is_if_valid: Condition parsed as: 9.6949053333333346 < 9.7113888888888873 2011-Dec-09 04:56:00 COMMAND run_command_line: EXECUTING command 48: 'FIXEDDRIFT az=218.74 alfaangle=-16.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_093 ra=95300.00 dec=213500.00' 2011-Dec-09 04:56:00 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-09 04:56:01 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-09 04:56:01 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 218.74 -16.3 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p1_093 95300.00 213500.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-09 04:56:01 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-09 04:56:01 LOG5 begin_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2011-Dec-09 04:56:01 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p1_091' 2011-Dec-09 04:56:01 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-09 04:56:01 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p1_093} 2011-Dec-09 04:56:01 INFO3 fixed_driftmap: Sending telescope to Az = 218.74 and ZA = 4.09 2011-Dec-09 04:56:01 LOG3 track_source: Calling 'track_source AGES3193_p1_093 218.74 4.0896204627 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-09 04:56:01 START begin_task: Starting task 'sending tracking commands' 2011-Dec-09 04:56:01 LOG5 begin_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2011-Dec-09 04:56:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_093} INFO {Slewing to source 'AGES3193_p1_093' ...} 2011-Dec-09 04:56:01 INFO1 track_source: Starting to track AGES3193_p1_093 2011-Dec-09 04:56:01 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_093" 2011-Dec-09 04:56:01 LOG3 vw_send: To DATATAKING: set ra 218.74 2011-Dec-09 04:56:01 LOG3 vw_send: To DATATAKING: set dec 4.0896204627 2011-Dec-09 04:56:01 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-09 04:56:01 LOG3 vw_send: To DATATAKING: pnt tr 218.74 4.0896204627 -CF 2011-Dec-09 04:56:01 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-09 04:56:01 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-09 04:56:01 LOG5 finish_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2011-Dec-09 04:56:01 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-09 04:56:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:56:01 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-09 04:56:01 LOG5 end_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2011-Dec-09 04:56:01 START begin_task: Starting task 'rotate ALFA to -16.3 degrees' 2011-Dec-09 04:56:01 LOG5 begin_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2011-Dec-09 04:56:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -16.3 degrees ...} 2011-Dec-09 04:56:01 INFO2 rotate_alfa: ALFA commanded to -16.3 degrees 2011-Dec-09 04:56:01 LOG3 sock_errsend: To ALFAMOTOR: POSITION -16.3 REPLY 2011-Dec-09 04:56:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-09 04:56:01 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-09 04:56:01 LOG5 begin_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2011-Dec-09 04:56:01 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_093" 2011-Dec-09 04:56:01 LOG4 got_cormsg: From DATATAKING: set ra 218.74 2011-Dec-09 04:56:01 LOG4 got_cormsg: From DATATAKING: set dec 4.0896204627 2011-Dec-09 04:56:01 LOG4 got_cormsg: From DATATAKING: vw% 218.74 2011-Dec-09 04:56:01 LOG4 got_cormsg: From DATATAKING: vw% 4.0896204627 2011-Dec-09 04:56:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:56:01 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-09 04:56:01 LOG4 got_cormsg: From DATATAKING: pnt tr 218.74 4.0896204627 -CF 2011-Dec-09 04:56:01 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-09 04:56:01 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-09 04:56:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.147 (still bad) 2011-Dec-09 04:56:19 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-09 04:56:19 INFO3 alfa_motor: ALFA rotator in-position -16.30 degrees 2011-Dec-09 04:56:19 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-09 04:56:19 LOG5 end_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2011-Dec-09 04:56:19 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-09 04:56:19 STOP finish_task: Finishing task 'rotate ALFA to -16.3 degrees' 2011-Dec-09 04:56:19 LOG5 finish_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2011-Dec-09 04:56:19 INFO2 finish_task: DONE finished configuration: rotating ALFA to -16.3 degrees 2011-Dec-09 04:56:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:56:19 STOP end_task: Finishing task 'rotate ALFA to -16.3 degrees' with status 'OK' 2011-Dec-09 04:56:19 LOG5 end_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2011-Dec-09 04:56:19 START begin_task: Starting task 'waiting on telescope' 2011-Dec-09 04:56:19 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2011-Dec-09 04:56:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-09 04:56:19 LOG3 waittrk: Start waittrk 5 2011-Dec-09 04:56:19 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-09 04:56:19 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2011-Dec-09 04:56:24 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-09 04:56:24 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2011-Dec-09 04:56:24 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-09 04:56:24 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2011-Dec-09 04:58:00 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-09 04:58:00 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2011-Dec-09 04:58:00 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-09 04:58:00 INFO2 waittrk: Now tracking AGES3193_p1_093 2011-Dec-09 04:58:00 LOG4 waittrk: Current telescope position: Az = 218.17 ZA = 4.10 2011-Dec-09 04:58:00 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-09 04:58:00 LOG5 finish_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2011-Dec-09 04:58:00 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-09 04:58:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:58:00 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-09 04:58:00 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2011-Dec-09 04:58:00 START begin_task: Starting task 'selecting calibration type' 2011-Dec-09 04:58:00 LOG5 begin_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2011-Dec-09 04:58:00 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-09 04:58:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-09 04:58:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 04:58:00 START begin_task: Starting task 'waiting on setcal' 2011-Dec-09 04:58:00 LOG5 begin_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2011-Dec-09 04:58:00 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-09 04:58:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 04:58:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:58:01 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-09 04:58:01 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-09 04:58:01 LOG5 end_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2011-Dec-09 04:58:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-09 04:58:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-09 04:58:01 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-09 04:58:01 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-09 04:58:01 LOG5 begin_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2011-Dec-09 04:58:01 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:58:02 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-09 04:58:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-09 04:58:02 LOG5 end_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2011-Dec-09 04:58:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-09 04:58:02 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-09 04:58:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-09 04:58:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-09 04:58:02 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-09 04:58:02 LOG5 begin_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2011-Dec-09 04:58:02 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-09 04:58:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-09 04:58:02 LOG5 end_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2011-Dec-09 04:58:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-09 04:58:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-09 04:58:02 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-09 04:58:02 LOG5 end_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2011-Dec-09 04:58:02 LOG5 dopset_later: Calling 'dopset_later 39.497262133870571' 2011-Dec-09 04:58:02 INFO3 dopset_later: Setting Doppler correction for 04:58:40 (39.5 seconds from now) 2011-Dec-09 04:58:02 LOG5 antvel: Calling 'antvel 218.740000 4.089620 F Heliocentric 39.497262133870571' 2011-Dec-09 04:58:02 LOG2 antvel: Transforming current Az = 218.74 ZA = 4.09 to apparent RA = 09:53:41.4 Dec = +21:31:23.8 2011-Dec-09 04:58:02 LOG2 antvel: Parameters to Doppler: Heliocentric 32320 2011 343 0.0 2011-Dec-09 04:58:02 INFO5 antvel: Computed antenna velocity: -27.31524 km/s 2011-Dec-09 04:58:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-27.315241721100001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-09 04:58:02 INFO4 dopset_gen: New sky frequencies: 1381.369290 1381.369290 1381.369290 1381.369290 1381.369290 1381.369290 1381.369290 1381.369290 1381.369290 2011-Dec-09 04:58:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.369290 sky0=1381.369290 sky1=1381.369290 sky2=1381.369290 sky3=1381.369290 sky4=1381.369290 sky5=1381.369290 sky6=1381.369290 sky7=1381.369290 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 04:58:02 LOG2 dopset_gen: Result from 'sky2syn': 1631.369290 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 04:58:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631369290.0} 2011-Dec-09 04:58:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:58:02 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-09 04:58:02 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-09 04:58:02 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:24.9 Dec = +21:34:47.1 2011-Dec-09 04:58:02 LOG3 track_source: Calling 'track_source AGES3193_p1_093 095224.9 213447.1 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-09 04:58:02 START begin_task: Starting task 'sending tracking commands' 2011-Dec-09 04:58:02 LOG5 begin_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2011-Dec-09 04:58:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_093} INFO {Slewing to source 'AGES3193_p1_093' ...} 2011-Dec-09 04:58:02 INFO1 track_source: Starting to track AGES3193_p1_093 2011-Dec-09 04:58:02 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_093" 2011-Dec-09 04:58:02 LOG3 vw_send: To DATATAKING: set ra 095224.9 2011-Dec-09 04:58:02 LOG3 vw_send: To DATATAKING: set dec 213447.1 2011-Dec-09 04:58:02 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-09 04:58:02 LOG3 vw_send: To DATATAKING: pnt tr 095224.9 213447.1 -CJ 2011-Dec-09 04:58:02 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-09 04:58:02 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-09 04:58:02 LOG5 finish_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2011-Dec-09 04:58:02 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-09 04:58:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:58:02 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-09 04:58:02 LOG5 end_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2011-Dec-09 04:58:02 START begin_task: Starting task 'waiting on telescope' 2011-Dec-09 04:58:02 LOG5 begin_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2011-Dec-09 04:58:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-09 04:58:02 LOG3 waittrk: Start waittrk 5 2011-Dec-09 04:58:02 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-09 04:58:02 LOG5 begin_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2011-Dec-09 04:58:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631369290.0} 2011-Dec-09 04:58:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 04:58:02 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:58:02 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_093" 2011-Dec-09 04:58:02 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:58:02 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:58:02 LOG4 got_cormsg: From DATATAKING: set ra 095224.9 2011-Dec-09 04:58:02 LOG4 got_cormsg: From DATATAKING: set dec 213447.1 2011-Dec-09 04:58:02 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-09 04:58:02 LOG4 got_cormsg: From DATATAKING: pnt tr 095224.9 213447.1 -CJ 2011-Dec-09 04:58:02 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-09 04:58:02 LOG4 got_cormsg: From DATATAKING: 095224.9 2011-Dec-09 04:58:02 LOG4 got_cormsg: From DATATAKING: vw% 213447.1 2011-Dec-09 04:58:02 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2011-Dec-09 04:58:07 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-09 04:58:07 LOG5 end_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2011-Dec-09 04:58:07 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-09 04:58:07 LOG5 begin_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2011-Dec-09 04:58:13 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-09 04:58:13 LOG5 end_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2011-Dec-09 04:58:13 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-09 04:58:13 INFO2 waittrk: Now tracking AGES3193_p1_093 2011-Dec-09 04:58:13 LOG4 waittrk: Current telescope position: Az = 217.85 ZA = 4.08 2011-Dec-09 04:58:13 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-09 04:58:13 LOG5 finish_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2011-Dec-09 04:58:13 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-09 04:58:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:58:13 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-09 04:58:13 LOG5 end_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2011-Dec-09 04:58:13 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-09 04:58:13 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2011-Dec-09 04:58:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-09 04:58:14 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-09 04:58:14 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-09 04:58:14 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-09 04:58:14 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 04:58:14 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-09 04:58:14 LOG5 begin_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2011-Dec-09 04:58:14 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-09 04:58:14 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 04:58:14 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:58:14 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-09 04:58:14 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-09 04:58:14 LOG5 end_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2011-Dec-09 04:58:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-09 04:58:14 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-09 04:58:14 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2011-Dec-09 04:58:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-09 04:58:14 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-09 04:58:14 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-09 04:58:14 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-09 04:58:14 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-09 04:58:14 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-09 04:58:14 LOG5 begin_task: Level: (5) ID = <10208> Status = 0 0 0 0 ok 2011-Dec-09 04:58:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-09 04:58:14 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:58:14 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 7 5 dB 2011-Dec-09 04:58:14 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 2 3 dB 2011-Dec-09 04:58:14 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 4 dB --- beam 3: 2 2 dB 2011-Dec-09 04:58:14 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2011-Dec-09 04:58:14 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-09 04:58:14 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-09 04:58:14 LOG5 end_task: Level: (5) ID = <10208> Status = 0 0 0 0 ok 2011-Dec-09 04:58:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.084 0.997 ALFA beam 1: 1.092 1.113 2011-Dec-09 04:58:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.066 0.933 ALFA beam 3: 0.999 1.076 2011-Dec-09 04:58:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.789 1.041 ALFA beam 5: 1.102 1.032 2011-Dec-09 04:58:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.032 0.014 ALFA beam 7: 0.899 0.014 2011-Dec-09 04:58:14 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-09 04:58:14 LOG5 finish_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2011-Dec-09 04:58:14 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-09 04:58:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:58:15 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-09 04:58:15 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2011-Dec-09 04:58:15 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-09 04:58:15 LOG5 begin_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2011-Dec-09 04:58:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-09 04:58:15 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-09 04:58:15 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-09 04:58:15 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-09 04:58:15 LOG5 begin_task: Level: (5) ID = <10210> Status = 0 0 0 0 ok 2011-Dec-09 04:58:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-09 04:58:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.084 0.997 1.092 1.113 2011-Dec-09 04:58:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 0.933 0.999 1.076 2011-Dec-09 04:58:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.789 1.041 1.102 1.032 2011-Dec-09 04:58:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.032 0.014 0.899 0.014 2011-Dec-09 04:58:21 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.3 27.5 B 29.3 29.4 mn:A -0.1 -0.1 B -0.4 -0.4 gn: 11 11 2011-Dec-09 04:58:21 INFO3 from_mock: From MOCK: b0s1g0 rms:A 31.7 30.3 B 30.7 32.5 mn:A 0.2 -0.5 B -0.4 0.1 gn: 12 12 2011-Dec-09 04:58:21 INFO3 from_mock: From MOCK: b1s0g0 rms:A 29.8 27.8 B 32.4 28.4 mn:A 0.5 0.6 B 0.1 -0.0 gn: 7 11 2011-Dec-09 04:58:21 INFO3 from_mock: From MOCK: b1s1g0 rms:A 32.8 30.2 B 30.6 30.6 mn:A -0.2 -0.2 B 0.5 0.2 gn: 9 10 2011-Dec-09 04:58:21 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.2 30.3 B 31.1 32.5 mn:A -0.1 -0.5 B 0.3 -0.1 gn: 11 12 2011-Dec-09 04:58:21 INFO3 from_mock: From MOCK: b2s1g0 rms:A 28.5 28.8 B 31.9 29.6 mn:A 0.1 -0.2 B 0.1 0.2 gn: 11 12 2011-Dec-09 04:58:21 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.6 31.4 B 30.7 27.4 mn:A 0.4 -0.3 B 0.0 -0.2 gn: 13 12 2011-Dec-09 04:58:21 INFO3 from_mock: From MOCK: b3s1g0 rms:A 29.4 28.8 B 29.0 30.2 mn:A -0.3 0.3 B -0.0 0.0 gn: 12 12 2011-Dec-09 04:58:21 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.5 28.6 B 30.7 30.8 mn:A -0.3 -0.3 B -0.5 0.0 gn: 13 12 2011-Dec-09 04:58:21 INFO3 from_mock: From MOCK: b4s1g0 rms:A 31.5 28.5 B 29.4 28.4 mn:A -0.0 -0.0 B -0.4 0.1 gn: 16 13 2011-Dec-09 04:58:21 INFO3 from_mock: From MOCK: b5s0g0 rms:A 31.6 30.5 B 29.6 29.5 mn:A 0.5 0.4 B -0.0 0.4 gn: 13 11 2011-Dec-09 04:58:21 INFO3 from_mock: From MOCK: b5s1g0 rms:A 31.9 31.7 B 29.9 29.7 mn:A -0.4 0.3 B 0.0 0.2 gn: 13 11 2011-Dec-09 04:58:21 INFO3 from_mock: From MOCK: b6s0g0 rms:A 31.7 29.0 B 15.3 15.8 mn:A -0.3 0.0 B 0.4 -0.5 gn: 13 31 2011-Dec-09 04:58:21 INFO3 from_mock: From MOCK: b6s1g0 rms:A 32.2 29.3 B 12.3 11.9 mn:A 0.6 0.5 B 0.1 0.1 gn: 14 31 2011-Dec-09 04:58:21 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-09 04:58:21 LOG5 end_task: Level: (5) ID = <10210> Status = 0 0 0 0 ok 2011-Dec-09 04:58:21 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-09 04:58:21 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-09 04:58:21 LOG5 finish_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2011-Dec-09 04:58:21 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-09 04:58:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:58:21 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-09 04:58:21 LOG5 end_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2011-Dec-09 04:58:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-09 04:58:21 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-09 04:58:21 LOG5 finish_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2011-Dec-09 04:58:21 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-09 04:58:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:58:21 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-09 04:58:21 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2011-Dec-09 04:58:21 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 CF 2011-Dec-09 04:58:21 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 CF 2011-Dec-09 04:58:21 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 CF 2011-Dec-09 04:58:21 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 CF 2011-Dec-09 04:58:21 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-09 04:58:21 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-09 04:58:21 LOG5 begin_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2011-Dec-09 04:58:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-09 04:58:21 START begin_task: Starting task 'selecting calibration type' 2011-Dec-09 04:58:21 LOG5 begin_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2011-Dec-09 04:58:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-09 04:58:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-09 04:58:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 04:58:21 START begin_task: Starting task 'waiting on setcal' 2011-Dec-09 04:58:21 LOG5 begin_task: Level: (5) ID = <10213> Status = 0 0 0 0 ok 2011-Dec-09 04:58:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 CF' 2011-Dec-09 04:58:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-09 04:58:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 04:58:21 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:58:21 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-09 04:58:21 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-09 04:58:21 LOG5 end_task: Level: (5) ID = <10213> Status = 0 0 0 0 ok 2011-Dec-09 04:58:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-09 04:58:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-09 04:58:22 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-09 04:58:22 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-09 04:58:22 LOG5 begin_task: Level: (5) ID = <10214> Status = 0 0 0 0 ok 2011-Dec-09 04:58:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:58:22 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-09 04:58:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-09 04:58:22 LOG5 end_task: Level: (5) ID = <10214> Status = 0 0 0 0 ok 2011-Dec-09 04:58:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-09 04:58:22 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-09 04:58:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-09 04:58:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-09 04:58:22 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-09 04:58:22 LOG5 begin_task: Level: (5) ID = <10215> Status = 0 0 0 0 ok 2011-Dec-09 04:58:22 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-09 04:58:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-09 04:58:22 LOG5 end_task: Level: (5) ID = <10215> Status = 0 0 0 0 ok 2011-Dec-09 04:58:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-09 04:58:22 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-09 04:58:22 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-09 04:58:22 LOG5 end_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2011-Dec-09 04:58:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-09 04:58:22 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-09 04:58:22 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-09 04:58:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-09 04:58:22 LOG5 begin_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2011-Dec-09 04:58:22 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-09 04:58:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-09 04:58:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-09 04:58:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-09 04:58:22 LOG5 end_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2011-Dec-09 04:58:22 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-09 04:58:22 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-09 04:58:22 LOG5 begin_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2011-Dec-09 04:58:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-09 04:58:22 LOG5 log_alfabeam: Parameters: 9.8735833333333325 21.579750000000001 9.706403 2011.9396501001343 -16.300014 2011-Dec-09 04:58:22 LOG4 log_alfabeam: ALFABEAM 0 9.873583333333327 21.579750000000011 2011-Dec-09 04:58:22 LOG4 log_alfabeam: ALFABEAM 1 9.873867446699279 21.481247620294624 2011-Dec-09 04:58:22 LOG4 log_alfabeam: ALFABEAM 2 9.879819323641508 21.546858270597642 2011-Dec-09 04:58:22 LOG4 log_alfabeam: ALFABEAM 3 9.879483552561625 21.646460972344311 2011-Dec-09 04:58:22 LOG4 log_alfabeam: ALFABEAM 4 9.873116039682413 21.678920670632923 2011-Dec-09 04:58:22 LOG4 log_alfabeam: ALFABEAM 5 9.867331563358613 21.610296964911790 2011-Dec-09 04:58:22 LOG4 log_alfabeam: ALFABEAM 6 9.867745176931351 21.512208061794112 2011-Dec-09 04:58:22 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-09 04:58:22 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-09 04:58:22 LOG3 take_mock_data: PSET configuration: obsnm=CF 2011-Dec-09 04:58:22 LOG3 take_mock_data: PSET configuration: object=AGES3193_p1_093 2011-Dec-09 04:58:22 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-09 04:58:22 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-09 04:58:22 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-09 04:58:22 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-09 04:58:22 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-09 04:58:22 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-09 04:58:22 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-09 04:58:22 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-09 04:58:22 LOG3 take_mock_data: PSET configuration: patternid=134300225 2011-Dec-09 04:58:22 LOG3 take_mock_data: PSET configuration: scanid=134300226 2011-Dec-09 04:58:22 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-09 04:58:22 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-09 04:58:22 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-09 04:58:22 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456369290.0 2011-Dec-09 04:58:22 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306369290.0 2011-Dec-09 04:58:22 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-09 04:58:22 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-09 04:58:22 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=CF:object=AGES3193_p1_093:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=134300225:scanid=134300226:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456369290.0:topobfreqhz=1306369290.0:filetype=1 2011-Dec-09 04:58:22 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-09 04:58:22 LOG5 begin_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2011-Dec-09 04:58:22 LOG4 from_mock: From MOCK: psetok 2011-Dec-09 04:58:22 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-09 04:58:22 LOG5 end_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2011-Dec-09 04:58:22 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-09 04:58:22 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-09 04:58:22 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-09 04:58:22 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-09 04:58:22 LOG5 begin_task: Level: (5) ID = <10219> Status = 0 0 0 0 ok 2011-Dec-09 04:58:22 NOTE WAPPDATA-new_file: New FITS file: wapp.20111209.a2048.0003.fits 2011-Dec-09 04:58:22 LOG4 from_mock: From MOCK: starok 2011-Dec-09 04:58:22 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-09 04:58:22 LOG5 end_task: Level: (5) ID = <10219> Status = 0 0 0 0 ok 2011-Dec-09 04:58:22 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-09 04:58:22 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134300226 2011-Dec-09 04:58:23 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-09 04:58:23 LOG5 begin_task: Level: (5) ID = <10220> Status = 0 0 0 0 ok 2011-Dec-09 04:58:23 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111209.a2048.0003.fits} 2011-Dec-09 04:58:23 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-09 04:58:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:58:23 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-09 04:58:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-09 04:58:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32304.00 2011-Dec-09 04:58:25 INFO2 got_mock_message: Mock spectrometer start file number is 00600 2011-Dec-09 04:58:25 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-09 04:58:25 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-09 04:58:25 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-09 04:58:25 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-09 04:58:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-09 04:58:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-09 04:58:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-09 04:58:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-09 04:58:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-09 04:58:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-09 04:58:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-09 04:58:25 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-09 04:58:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:58:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:58:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:58:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:58:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:58:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:58:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:58:28 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:58:28.01 2011-Dec-09 04:58:28 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323421108.01 Fri Dec 9 04:58:28 2011 2011-Dec-09 04:58:28 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-09 04:58:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.369290 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:58:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.369290 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:58:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.369290 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:58:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.369290 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:58:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.369290 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.537 (still bad) 2011-Dec-09 04:58:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.369290 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:58:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.369290 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:58:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.369290 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:58:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.369290 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:58:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:58:34 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-09 04:58:34 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-09 04:58:34 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-09 04:58:34 LOG5 end_task: Level: (5) ID = <10220> Status = 0 0 0 0 ok 2011-Dec-09 04:58:34 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-09 04:58:34 LOG5 end_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2011-Dec-09 04:58:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-09 04:58:34 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-09 04:58:34 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-09 04:58:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-09 04:58:34 LOG5 begin_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2011-Dec-09 04:58:34 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-09 04:58:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-09 04:58:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-09 04:58:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-09 04:58:34 LOG5 end_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2011-Dec-09 04:58:34 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-09 04:58:34 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-09 04:58:34 LOG5 begin_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2011-Dec-09 04:58:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-09 04:58:34 LOG5 log_alfabeam: Parameters: 9.8735833333333325 21.579750000000001 9.709467 2011.9396504487031 -16.300014 2011-Dec-09 04:58:34 LOG4 log_alfabeam: ALFABEAM 0 9.873583333333315 21.579750000000001 2011-Dec-09 04:58:34 LOG4 log_alfabeam: ALFABEAM 1 9.873927258694787 21.481287446090413 2011-Dec-09 04:58:34 LOG4 log_alfabeam: ALFABEAM 2 9.879839249992322 21.547596643815652 2011-Dec-09 04:58:34 LOG4 log_alfabeam: ALFABEAM 3 9.879442567716358 21.647160640553420 2011-Dec-09 04:58:34 LOG4 log_alfabeam: ALFABEAM 4 9.873054521255984 21.678863246118926 2011-Dec-09 04:58:34 LOG4 log_alfabeam: ALFABEAM 5 9.867313023307391 21.609541505027753 2011-Dec-09 04:58:34 LOG4 log_alfabeam: ALFABEAM 6 9.867787039881231 21.511510650703947 2011-Dec-09 04:58:34 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-09 04:58:34 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-09 04:58:34 LOG3 take_mock_data: PSET configuration: obsnm=CF 2011-Dec-09 04:58:34 LOG3 take_mock_data: PSET configuration: object=AGES3193_p1_093 2011-Dec-09 04:58:34 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-09 04:58:34 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-09 04:58:34 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-09 04:58:34 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-09 04:58:34 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-09 04:58:34 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-09 04:58:34 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-09 04:58:34 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-09 04:58:34 LOG3 take_mock_data: PSET configuration: patternid=134300225 2011-Dec-09 04:58:34 LOG3 take_mock_data: PSET configuration: scanid=134300227 2011-Dec-09 04:58:34 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-09 04:58:34 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-09 04:58:34 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-09 04:58:34 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456369290.0 2011-Dec-09 04:58:34 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306369290.0 2011-Dec-09 04:58:34 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-09 04:58:34 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-09 04:58:34 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=CF:object=AGES3193_p1_093:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=134300225:scanid=134300227:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456369290.0:topobfreqhz=1306369290.0:filetype=1 2011-Dec-09 04:58:34 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-09 04:58:34 LOG5 begin_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2011-Dec-09 04:58:34 LOG4 from_mock: From MOCK: psetok 2011-Dec-09 04:58:34 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-09 04:58:34 LOG5 end_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2011-Dec-09 04:58:34 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-09 04:58:34 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-09 04:58:34 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-09 04:58:34 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-09 04:58:34 LOG5 begin_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2011-Dec-09 04:58:34 LOG4 from_mock: From MOCK: starok 2011-Dec-09 04:58:34 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-09 04:58:34 LOG5 end_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2011-Dec-09 04:58:34 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-09 04:58:34 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134300227 2011-Dec-09 04:58:34 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-09 04:58:34 LOG5 begin_task: Level: (5) ID = <10225> Status = 0 0 0 0 ok 2011-Dec-09 04:58:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:58:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-09 04:58:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32315.00 2011-Dec-09 04:58:35 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-09 04:58:35 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-09 04:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.537 (still bad) 2011-Dec-09 04:58:37 INFO2 got_mock_message: Mock spectrometer start file number is 00700 2011-Dec-09 04:58:37 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-09 04:58:37 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-09 04:58:37 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-09 04:58:37 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-09 04:58:37 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-09 04:58:37 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-09 04:58:37 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-09 04:58:37 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-09 04:58:37 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-09 04:58:37 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-09 04:58:37 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-09 04:58:37 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-09 04:58:37 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:58:37 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:58:37 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:58:37 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:58:37 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:58:37 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:58:37 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 04:58:40 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:58:40.01 2011-Dec-09 04:58:40 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323421120.01 Fri Dec 9 04:58:40 2011 2011-Dec-09 04:58:40 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-09 04:58:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.369290 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:58:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.369290 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:58:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.369290 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:58:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.369290 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:58:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.369290 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:58:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.369290 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:58:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.369290 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:58:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.369290 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:58:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.369290 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:58:40 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-09 04:58:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 04:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-09 04:58:46 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-09 04:58:46 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-09 04:58:46 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-09 04:58:46 LOG5 end_task: Level: (5) ID = <10225> Status = 0 0 0 0 ok 2011-Dec-09 04:58:46 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-09 04:58:46 LOG5 end_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2011-Dec-09 04:58:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-09 04:58:46 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-09 04:58:46 LOG5 finish_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2011-Dec-09 04:58:46 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-09 04:58:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:58:46 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-09 04:58:46 LOG5 end_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2011-Dec-09 04:58:46 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-09 04:58:46 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 218.74 and ZA = 4.09 2011-Dec-09 04:58:46 LOG3 track_source: Calling 'track_source AGES3193_p1_093 218.74 4.0896204627 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-09 04:58:46 START begin_task: Starting task 'sending tracking commands' 2011-Dec-09 04:58:46 LOG5 begin_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2011-Dec-09 04:58:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_093} INFO {Slewing to source 'AGES3193_p1_093' ...} 2011-Dec-09 04:58:46 INFO1 track_source: Starting to track AGES3193_p1_093 2011-Dec-09 04:58:46 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_093" 2011-Dec-09 04:58:46 LOG3 vw_send: To DATATAKING: set ra 218.74 2011-Dec-09 04:58:46 LOG3 vw_send: To DATATAKING: set dec 4.0896204627 2011-Dec-09 04:58:46 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-09 04:58:46 LOG3 vw_send: To DATATAKING: pnt tr 218.74 4.0896204627 -CF 2011-Dec-09 04:58:46 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-09 04:58:46 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-09 04:58:46 LOG5 finish_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2011-Dec-09 04:58:46 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-09 04:58:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 04:58:46 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-09 04:58:46 LOG5 end_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2011-Dec-09 04:58:46 LOG1 fixed_driftmap: Parameters: HA = -00:10:59.9 Start = 09:42:41.6 LST = 09:42:46.1 diff = -4.5 secs 2011-Dec-09 04:58:46 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2011-Dec-09 04:58:46 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-09 04:58:46 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-09 04:58:46 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-09 04:58:46 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-09 04:58:46 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-09 04:58:46 LOG5 begin_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2011-Dec-09 04:58:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-09 04:58:46 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-09 04:58:46 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-09 04:58:46 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-09 04:58:46 LOG3 take_mock_data: PSET configuration: obsnm=CF 2011-Dec-09 04:58:46 LOG3 take_mock_data: PSET configuration: object=AGES3193_p1_093 2011-Dec-09 04:58:46 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-09 04:58:46 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-09 04:58:46 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-09 04:58:46 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-09 04:58:46 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-09 04:58:46 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-09 04:58:46 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-09 04:58:46 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-09 04:58:46 LOG3 take_mock_data: PSET configuration: patternid=134300228 2011-Dec-09 04:58:46 LOG3 take_mock_data: PSET configuration: scanid=134300228 2011-Dec-09 04:58:46 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-09 04:58:46 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-09 04:58:46 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-09 04:58:46 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456369290.0 2011-Dec-09 04:58:46 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306369290.0 2011-Dec-09 04:58:46 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-09 04:58:46 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-09 04:58:46 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=CF:object=AGES3193_p1_093:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=134300228:scanid=134300228:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456369290.0:topobfreqhz=1306369290.0:filetype=1 2011-Dec-09 04:58:46 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-09 04:58:46 LOG5 begin_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2011-Dec-09 04:58:46 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_093" 2011-Dec-09 04:58:46 LOG4 got_cormsg: From DATATAKING: set ra 218.74 2011-Dec-09 04:58:46 LOG4 from_mock: From MOCK: psetok 2011-Dec-09 04:58:46 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-09 04:58:46 LOG5 end_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2011-Dec-09 04:58:46 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-09 04:58:46 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-09 04:58:46 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-09 04:58:46 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-09 04:58:46 LOG5 begin_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2011-Dec-09 04:58:46 LOG4 got_cormsg: From DATATAKING: set dec 4.0896204627 2011-Dec-09 04:58:46 LOG4 got_cormsg: From DATATAKING: vw% 218.74 2011-Dec-09 04:58:46 LOG4 from_mock: From MOCK: starok 2011-Dec-09 04:58:46 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-09 04:58:46 LOG5 end_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2011-Dec-09 04:58:46 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-09 04:58:46 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 134300228 2011-Dec-09 04:58:47 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-09 04:58:47 LOG5 begin_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2011-Dec-09 04:58:47 LOG4 got_cormsg: From DATATAKING: vw% 4.0896204627 2011-Dec-09 04:58:47 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-09 04:58:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 04:58:47 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:58:47 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-09 04:58:47 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-09 04:58:47 LOG4 got_cormsg: From DATATAKING: pnt tr 218.74 4.0896204627 -CF 2011-Dec-09 04:58:47 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-09 04:58:47 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-09 04:58:47 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 04:58:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-09 04:58:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32328.00 2011-Dec-09 04:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-09 04:58:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.369290 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 04:58:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.369290 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:58:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.369290 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 04:58:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.369290 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:58:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.369290 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:58:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.369290 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:58:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.369290 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 04:58:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.369290 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 04:58:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.369290 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 04:58:49 INFO2 got_mock_message: Mock spectrometer start file number is 00800 2011-Dec-09 04:58:49 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-09 04:58:49 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2011-Dec-09 04:58:49 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-09 04:58:49 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-09 04:58:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-09 04:58:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-09 04:58:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-09 04:58:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-09 04:58:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-09 04:58:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-09 04:58:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-09 04:58:49 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-09 04:58:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 04:58:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 04:58:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 04:58:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 04:58:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 04:58:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 04:58:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 04:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2011-Dec-09 04:58:50 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2011-Dec-09 04:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-09 04:58:52 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:58:52.02 2011-Dec-09 04:58:52 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323421132.02 Fri Dec 9 04:58:52 2011 2011-Dec-09 04:58:52 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-09 04:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2011-Dec-09 04:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2011-Dec-09 04:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-09 04:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2011-Dec-09 04:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2011-Dec-09 04:59:02 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2011-Dec-09 04:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-09 04:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.124 (still bad) 2011-Dec-09 04:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-09 04:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-09 04:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-09 04:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-09 04:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-09 04:59:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.029 < 0.75)! 2011-Dec-09 04:59:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.091 1.004 1.098 1.124 2011-Dec-09 04:59:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 0.936 1.008 1.084 2011-Dec-09 04:59:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.795 1.048 1.109 1.039 2011-Dec-09 04:59:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 0.029 0.905 0.029 2011-Dec-09 04:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-09 04:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-09 04:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-09 04:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-09 04:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-09 04:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.122 (still bad) 2011-Dec-09 04:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-09 04:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2011-Dec-09 04:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2011-Dec-09 04:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2011-Dec-09 04:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2011-Dec-09 04:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-09 04:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2011-Dec-09 04:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.133 (still bad) 2011-Dec-09 04:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.132 (still bad) 2011-Dec-09 04:59:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC = 4-7 errors PFB = 64-127 errors 2011-Dec-09 04:59:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 16-31 errors 2011-Dec-09 04:59:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC = 2048-4095 errors PFB = 64-127 errors 2011-Dec-09 04:59:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 32-63 errors 2011-Dec-09 04:59:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 64-127 errors 2011-Dec-09 04:59:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 32-63 errors 2011-Dec-09 04:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.131 (still bad) 2011-Dec-09 04:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.130 (still bad) 2011-Dec-09 04:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.128 (still bad) 2011-Dec-09 04:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.126 (still bad) 2011-Dec-09 04:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.123 (still bad) 2011-Dec-09 05:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.121 (still bad) 2011-Dec-09 05:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2011-Dec-09 05:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-09 05:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-09 05:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-09 05:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-09 05:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-09 05:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-09 05:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-09 05:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-09 05:00:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-09 05:00:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.084 0.998 1.091 1.116 2011-Dec-09 05:00:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.071 0.929 1.001 1.075 2011-Dec-09 05:00:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.789 1.038 1.112 1.041 2011-Dec-09 05:00:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.032 0.028 0.899 0.020 2011-Dec-09 05:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-09 05:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-09 05:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-09 05:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-09 05:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-09 05:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-09 05:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-09 05:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-09 05:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-09 05:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-09 05:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2011-Dec-09 05:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-09 05:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-09 05:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-09 05:00:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 16-31 errors 2011-Dec-09 05:00:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 2-3 errors 2011-Dec-09 05:00:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 16-31 errors 2011-Dec-09 05:00:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 32-63 errors 2011-Dec-09 05:00:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 64-127 errors 2011-Dec-09 05:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-09 05:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-09 05:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-09 05:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2011-Dec-09 05:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-09 05:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2011-Dec-09 05:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-09 05:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2011-Dec-09 05:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-09 05:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-09 05:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-09 05:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-09 05:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-09 05:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-09 05:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.116 (still bad) 2011-Dec-09 05:01:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-09 05:01:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.086 0.997 1.088 1.113 2011-Dec-09 05:01:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.071 0.928 0.998 1.075 2011-Dec-09 05:01:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.788 1.039 1.109 1.036 2011-Dec-09 05:01:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.031 0.024 0.899 0.024 2011-Dec-09 05:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.115 (still bad) 2011-Dec-09 05:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.112 (still bad) 2011-Dec-09 05:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.113 (still bad) 2011-Dec-09 05:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.116 (still bad) 2011-Dec-09 05:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-09 05:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-09 05:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-09 05:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-09 05:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-09 05:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-09 05:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-09 05:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-09 05:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-09 05:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-09 05:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-09 05:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2011-Dec-09 05:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2011-Dec-09 05:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-09 05:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-09 05:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-09 05:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-09 05:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-09 05:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-09 05:02:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2011-Dec-09 05:02:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.082 0.999 1.089 1.113 2011-Dec-09 05:02:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.072 0.927 0.999 1.073 2011-Dec-09 05:02:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.789 1.036 1.103 1.030 2011-Dec-09 05:02:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.029 0.029 0.897 0.019 2011-Dec-09 05:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-09 05:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2011-Dec-09 05:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2011-Dec-09 05:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.120 (still bad) 2011-Dec-09 05:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2011-Dec-09 05:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.111 (still bad) 2011-Dec-09 05:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.112 (still bad) 2011-Dec-09 05:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.122 (still bad) 2011-Dec-09 05:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2011-Dec-09 05:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2011-Dec-09 05:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.121 (still bad) 2011-Dec-09 05:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2011-Dec-09 05:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2011-Dec-09 05:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2011-Dec-09 05:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2011-Dec-09 05:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.120 (still bad) 2011-Dec-09 05:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2011-Dec-09 05:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.111 (still bad) 2011-Dec-09 05:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2011-Dec-09 05:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.112 (still bad) 2011-Dec-09 05:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.112 (still bad) 2011-Dec-09 05:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.120 (still bad) 2011-Dec-09 05:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2011-Dec-09 05:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.112 (still bad) 2011-Dec-09 05:03:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2011-Dec-09 05:03:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.087 0.999 1.088 1.115 2011-Dec-09 05:03:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.070 0.927 1.003 1.076 2011-Dec-09 05:03:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.788 1.040 1.105 1.031 2011-Dec-09 05:03:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.032 0.028 0.901 0.028 2011-Dec-09 05:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.112 (still bad) 2011-Dec-09 05:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.122 (still bad) 2011-Dec-09 05:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2011-Dec-09 05:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.112 (still bad) 2011-Dec-09 05:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.112 (still bad) 2011-Dec-09 05:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.121 (still bad) 2011-Dec-09 05:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-09 05:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-09 05:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-09 05:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-09 05:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-09 05:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.121 (still bad) 2011-Dec-09 05:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.112 (still bad) 2011-Dec-09 05:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2011-Dec-09 05:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-09 05:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-09 05:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-09 05:04:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-09 05:04:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.086 0.999 1.090 1.115 2011-Dec-09 05:04:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 0.927 1.002 1.076 2011-Dec-09 05:04:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.789 1.040 1.103 1.031 2011-Dec-09 05:04:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.032 0.028 0.900 0.020 2011-Dec-09 05:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-09 05:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-09 05:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-09 05:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-09 05:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-09 05:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-09 05:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-09 05:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-09 05:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-09 05:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-09 05:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.120 (still bad) 2011-Dec-09 05:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-09 05:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-09 05:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.120 (still bad) 2011-Dec-09 05:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-09 05:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2011-Dec-09 05:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2011-Dec-09 05:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-09 05:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-09 05:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-09 05:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2011-Dec-09 05:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-09 05:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2011-Dec-09 05:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.116 (still bad) 2011-Dec-09 05:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.115 (still bad) 2011-Dec-09 05:05:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-09 05:05:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 0.998 1.090 1.115 2011-Dec-09 05:05:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.077 0.928 1.004 1.077 2011-Dec-09 05:05:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.790 1.043 1.104 1.033 2011-Dec-09 05:05:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.033 0.024 0.901 0.024 2011-Dec-09 05:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.115 (still bad) 2011-Dec-09 05:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2011-Dec-09 05:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2011-Dec-09 05:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-09 05:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-09 05:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-09 05:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-09 05:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-09 05:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2011-Dec-09 05:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2011-Dec-09 05:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-09 05:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-09 05:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-09 05:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-09 05:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2011-Dec-09 05:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-09 05:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-09 05:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:06:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2011-Dec-09 05:06:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.083 0.996 1.093 1.116 2011-Dec-09 05:06:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.070 0.926 1.001 1.075 2011-Dec-09 05:06:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.789 1.037 1.112 1.037 2011-Dec-09 05:06:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.031 0.028 0.900 0.028 2011-Dec-09 05:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2011-Dec-09 05:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.120 (still bad) 2011-Dec-09 05:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.120 (still bad) 2011-Dec-09 05:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.120 (still bad) 2011-Dec-09 05:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2011-Dec-09 05:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.124 (still bad) 2011-Dec-09 05:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.126 (still bad) 2011-Dec-09 05:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.125 (still bad) 2011-Dec-09 05:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.124 (still bad) 2011-Dec-09 05:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.122 (still bad) 2011-Dec-09 05:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.122 (still bad) 2011-Dec-09 05:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2011-Dec-09 05:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2011-Dec-09 05:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2011-Dec-09 05:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-09 05:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2011-Dec-09 05:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.112 (still bad) 2011-Dec-09 05:07:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2011-Dec-09 05:07:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.084 0.994 1.090 1.115 2011-Dec-09 05:07:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.070 0.924 1.001 1.075 2011-Dec-09 05:07:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.789 1.042 1.103 1.031 2011-Dec-09 05:07:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.028 0.899 0.028 2011-Dec-09 05:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.122 (still bad) 2011-Dec-09 05:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2011-Dec-09 05:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2011-Dec-09 05:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.122 (still bad) 2011-Dec-09 05:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2011-Dec-09 05:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2011-Dec-09 05:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.121 (still bad) 2011-Dec-09 05:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2011-Dec-09 05:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.111 (still bad) 2011-Dec-09 05:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2011-Dec-09 05:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.121 (still bad) 2011-Dec-09 05:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-09 05:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2011-Dec-09 05:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.122 (still bad) 2011-Dec-09 05:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-09 05:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-09 05:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-09 05:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2011-Dec-09 05:08:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2011-Dec-09 05:08:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.083 0.996 1.089 1.114 2011-Dec-09 05:08:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 0.926 1.001 1.075 2011-Dec-09 05:08:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.790 1.040 1.106 1.031 2011-Dec-09 05:08:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.019 0.900 0.021 2011-Dec-09 05:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.120 (still bad) 2011-Dec-09 05:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-09 05:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2011-Dec-09 05:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-09 05:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-09 05:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-09 05:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.122 (still bad) 2011-Dec-09 05:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-09 05:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-09 05:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-09 05:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-09 05:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-09 05:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.121 (still bad) 2011-Dec-09 05:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2011-Dec-09 05:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2011-Dec-09 05:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.112 (still bad) 2011-Dec-09 05:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-09 05:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2011-Dec-09 05:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-09 05:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-09 05:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2011-Dec-09 05:09:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-09 05:09:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.084 0.998 1.090 1.115 2011-Dec-09 05:09:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.069 0.924 1.003 1.076 2011-Dec-09 05:09:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.788 1.039 1.104 1.032 2011-Dec-09 05:09:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.031 0.022 0.899 0.023 2011-Dec-09 05:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-09 05:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2011-Dec-09 05:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2011-Dec-09 05:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-09 05:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2011-Dec-09 05:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2011-Dec-09 05:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2011-Dec-09 05:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.113 (still bad) 2011-Dec-09 05:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.113 (still bad) 2011-Dec-09 05:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.113 (still bad) 2011-Dec-09 05:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.111 (still bad) 2011-Dec-09 05:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.114 (still bad) 2011-Dec-09 05:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2011-Dec-09 05:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-09 05:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-09 05:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-09 05:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-09 05:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-09 05:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.120 (still bad) 2011-Dec-09 05:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-09 05:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2011-Dec-09 05:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-09 05:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2011-Dec-09 05:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-09 05:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2011-Dec-09 05:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2011-Dec-09 05:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2011-Dec-09 05:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-09 05:10:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-09 05:10:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.090 1.004 1.096 1.120 2011-Dec-09 05:10:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.072 0.930 1.012 1.088 2011-Dec-09 05:10:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.789 1.040 1.108 1.035 2011-Dec-09 05:10:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.032 0.028 0.900 0.020 2011-Dec-09 05:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-09 05:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-09 05:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-09 05:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-09 05:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-09 05:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:10:47 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:10:49 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-09 05:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2011-Dec-09 05:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-09 05:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.112 (still bad) 2011-Dec-09 05:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.121 (still bad) 2011-Dec-09 05:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-09 05:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-09 05:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-09 05:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-09 05:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-09 05:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2011-Dec-09 05:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-09 05:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-09 05:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2011-Dec-09 05:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-09 05:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-09 05:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2011-Dec-09 05:11:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2011-Dec-09 05:11:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.086 0.998 1.089 1.117 2011-Dec-09 05:11:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 0.925 1.006 1.078 2011-Dec-09 05:11:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.788 1.039 1.103 1.033 2011-Dec-09 05:11:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.033 0.028 0.901 0.029 2011-Dec-09 05:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-09 05:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.123 (still bad) 2011-Dec-09 05:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.120 (still bad) 2011-Dec-09 05:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2011-Dec-09 05:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2011-Dec-09 05:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-09 05:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2011-Dec-09 05:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-09 05:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-09 05:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.121 (still bad) 2011-Dec-09 05:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-09 05:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2011-Dec-09 05:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2011-Dec-09 05:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2011-Dec-09 05:12:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2011-Dec-09 05:12:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.086 1.003 1.091 1.117 2011-Dec-09 05:12:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 0.925 1.003 1.074 2011-Dec-09 05:12:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.790 1.041 1.104 1.034 2011-Dec-09 05:12:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.028 0.897 0.028 2011-Dec-09 05:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-09 05:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2011-Dec-09 05:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2011-Dec-09 05:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-09 05:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-09 05:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-09 05:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-09 05:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-09 05:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2011-Dec-09 05:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-09 05:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-09 05:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2011-Dec-09 05:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-09 05:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-09 05:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2011-Dec-09 05:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2011-Dec-09 05:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.114 (still bad) 2011-Dec-09 05:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2011-Dec-09 05:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.113 (still bad) 2011-Dec-09 05:13:30 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 05:13:30.308 (seconds: 18810.308)!} 2011-Dec-09 05:13:30 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 05:13:30.308 (seconds: 18810.308)! 2011-Dec-09 05:13:31 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 18809.0 to 18810.0! 2011-Dec-09 05:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2011-Dec-09 05:13:32 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (18809.0 - 18811.0)! 2011-Dec-09 05:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2011-Dec-09 05:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2011-Dec-09 05:13:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-09 05:13:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 0.994 1.090 1.116 2011-Dec-09 05:13:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.069 0.923 1.000 1.075 2011-Dec-09 05:13:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.787 1.037 1.101 1.030 2011-Dec-09 05:13:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.027 0.898 0.027 2011-Dec-09 05:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-09 05:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2011-Dec-09 05:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2011-Dec-09 05:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.124 (still bad) 2011-Dec-09 05:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2011-Dec-09 05:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-09 05:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-09 05:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2011-Dec-09 05:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2011-Dec-09 05:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.112 (still bad) 2011-Dec-09 05:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2011-Dec-09 05:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2011-Dec-09 05:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-09 05:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-09 05:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-09 05:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2011-Dec-09 05:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2011-Dec-09 05:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.120 (still bad) 2011-Dec-09 05:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.125 (still bad) 2011-Dec-09 05:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.129 (still bad) 2011-Dec-09 05:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.128 (still bad) 2011-Dec-09 05:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.128 (still bad) 2011-Dec-09 05:14:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-09 05:14:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.081 0.998 1.102 1.125 2011-Dec-09 05:14:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.081 0.939 1.002 1.076 2011-Dec-09 05:14:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.789 1.040 1.103 1.034 2011-Dec-09 05:14:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.027 0.899 0.028 2011-Dec-09 05:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.123 (still bad) 2011-Dec-09 05:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.123 (still bad) 2011-Dec-09 05:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2011-Dec-09 05:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-09 05:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2011-Dec-09 05:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2011-Dec-09 05:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-09 05:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-09 05:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-09 05:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-09 05:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-09 05:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-09 05:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2011-Dec-09 05:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-09 05:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-09 05:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2011-Dec-09 05:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-09 05:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:15:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2011-Dec-09 05:15:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 1.000 1.092 1.117 2011-Dec-09 05:15:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.070 0.925 1.015 1.090 2011-Dec-09 05:15:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.787 1.039 1.104 1.032 2011-Dec-09 05:15:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.032 0.028 0.900 0.028 2011-Dec-09 05:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.122 (still bad) 2011-Dec-09 05:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2011-Dec-09 05:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2011-Dec-09 05:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.122 (still bad) 2011-Dec-09 05:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2011-Dec-09 05:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.111 (still bad) 2011-Dec-09 05:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2011-Dec-09 05:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2011-Dec-09 05:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2011-Dec-09 05:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.120 (still bad) 2011-Dec-09 05:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-09 05:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-09 05:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-09 05:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-09 05:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-09 05:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.121 (still bad) 2011-Dec-09 05:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2011-Dec-09 05:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2011-Dec-09 05:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2011-Dec-09 05:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2011-Dec-09 05:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2011-Dec-09 05:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2011-Dec-09 05:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-09 05:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-09 05:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2011-Dec-09 05:16:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-09 05:16:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.082 0.998 1.091 1.113 2011-Dec-09 05:16:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.069 0.926 1.016 1.092 2011-Dec-09 05:16:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.788 1.037 1.105 1.034 2011-Dec-09 05:16:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.028 0.897 0.020 2011-Dec-09 05:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-09 05:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2011-Dec-09 05:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2011-Dec-09 05:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2011-Dec-09 05:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2011-Dec-09 05:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.113 (still bad) 2011-Dec-09 05:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.113 (still bad) 2011-Dec-09 05:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2011-Dec-09 05:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2011-Dec-09 05:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-09 05:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-09 05:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2011-Dec-09 05:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-09 05:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2011-Dec-09 05:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-09 05:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2011-Dec-09 05:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2011-Dec-09 05:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-09 05:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2011-Dec-09 05:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2011-Dec-09 05:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2011-Dec-09 05:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2011-Dec-09 05:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2011-Dec-09 05:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2011-Dec-09 05:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-09 05:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2011-Dec-09 05:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-09 05:17:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-09 05:17:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.086 1.001 1.089 1.114 2011-Dec-09 05:17:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.069 0.925 1.003 1.075 2011-Dec-09 05:17:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.787 1.038 1.116 1.042 2011-Dec-09 05:17:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.027 0.899 0.028 2011-Dec-09 05:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2011-Dec-09 05:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2011-Dec-09 05:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2011-Dec-09 05:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-09 05:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2011-Dec-09 05:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2011-Dec-09 05:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2011-Dec-09 05:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-09 05:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2011-Dec-09 05:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2011-Dec-09 05:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-09 05:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2011-Dec-09 05:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2011-Dec-09 05:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2011-Dec-09 05:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-09 05:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-09 05:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-09 05:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2011-Dec-09 05:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2011-Dec-09 05:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2011-Dec-09 05:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-09 05:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2011-Dec-09 05:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2011-Dec-09 05:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-09 05:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2011-Dec-09 05:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2011-Dec-09 05:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2011-Dec-09 05:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2011-Dec-09 05:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2011-Dec-09 05:18:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-09 05:18:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.089 1.002 1.090 1.114 2011-Dec-09 05:18:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 0.929 1.002 1.077 2011-Dec-09 05:18:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.791 1.043 1.102 1.033 2011-Dec-09 05:18:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.027 0.898 0.028 2011-Dec-09 05:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2011-Dec-09 05:18:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 05:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-09 05:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-09 05:18:53 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-09 05:18:53 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-09 05:18:53 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-09 05:18:53 LOG5 end_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2011-Dec-09 05:18:53 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-09 05:18:53 LOG5 end_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2011-Dec-09 05:18:53 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-09 05:18:53 LOG5 finish_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2011-Dec-09 05:18:53 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-09 05:18:53 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-09 05:18:53 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-09 05:18:53 LOG5 end_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2011-Dec-09 05:18:53 COMMAND run_command_line: EXECUTING command 51: 'ENDIF' 2011-Dec-09 05:18:53 COMMAND run_command_line: EXECUTING command 54: 'IF LSTSLEW(AGES3193_p1_095) < 101541 THEN' 2011-Dec-09 05:18:53 LOG3 is_if_valid: Current source data: up 145.4 3.8 UP - - 73 3.0 2011-Dec-09 05:18:53 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p1_095) < 101541 2011-Dec-09 05:18:53 INFO5 is_if_valid: Condition parsed as: 10.099005 < 10.261388888888888 2011-Dec-09 05:18:53 COMMAND run_command_line: EXECUTING command 55: 'FIXEDDRIFT az=122.01 alfaangle=75.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_095 ra=95300.00 dec=213200.00' 2011-Dec-09 05:18:53 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-09 05:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-09 05:18:53 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-09 05:18:53 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 122.01 75.0 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p1_095 95300.00 213200.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-09 05:18:53 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-09 05:18:54 LOG5 begin_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2011-Dec-09 05:18:54 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p1_093' 2011-Dec-09 05:18:54 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-09 05:18:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p1_095} 2011-Dec-09 05:18:54 INFO3 fixed_driftmap: Sending telescope to Az = 122.01 and ZA = 6.04 2011-Dec-09 05:18:54 LOG3 track_source: Calling 'track_source AGES3193_p1_095 122.01 6.0391887116 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-09 05:18:54 START begin_task: Starting task 'sending tracking commands' 2011-Dec-09 05:18:54 LOG5 begin_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2011-Dec-09 05:18:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_095} INFO {Slewing to source 'AGES3193_p1_095' ...} 2011-Dec-09 05:18:54 INFO1 track_source: Starting to track AGES3193_p1_095 2011-Dec-09 05:18:54 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_095" 2011-Dec-09 05:18:54 LOG3 vw_send: To DATATAKING: set ra 122.01 2011-Dec-09 05:18:54 LOG3 vw_send: To DATATAKING: set dec 6.0391887116 2011-Dec-09 05:18:54 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-09 05:18:54 LOG3 vw_send: To DATATAKING: pnt tr 122.01 6.0391887116 -CF 2011-Dec-09 05:18:54 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-09 05:18:54 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-09 05:18:54 LOG5 finish_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2011-Dec-09 05:18:54 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-09 05:18:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 05:18:54 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-09 05:18:54 LOG5 end_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2011-Dec-09 05:18:54 START begin_task: Starting task 'rotate ALFA to +75 degrees' 2011-Dec-09 05:18:54 LOG5 begin_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2011-Dec-09 05:18:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +75 degrees ...} 2011-Dec-09 05:18:54 INFO2 rotate_alfa: ALFA commanded to +75.0 degrees 2011-Dec-09 05:18:54 LOG3 sock_errsend: To ALFAMOTOR: POSITION 75.0 REPLY 2011-Dec-09 05:18:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-09 05:18:54 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-09 05:18:54 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2011-Dec-09 05:18:54 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_095" 2011-Dec-09 05:18:54 LOG4 got_cormsg: From DATATAKING: set ra 122.01 2011-Dec-09 05:18:54 LOG4 got_cormsg: From DATATAKING: set dec 6.0391887116 2011-Dec-09 05:18:54 LOG4 got_cormsg: From DATATAKING: vw% 122.01 2011-Dec-09 05:18:54 LOG4 got_cormsg: From DATATAKING: vw% 6.0391887116 2011-Dec-09 05:18:54 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 05:18:54 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-09 05:18:54 LOG4 got_cormsg: From DATATAKING: pnt tr 122.01 6.0391887116 -CF 2011-Dec-09 05:18:54 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-09 05:18:54 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-09 05:18:54 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 05:19:45 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-09 05:19:45 INFO3 alfa_motor: ALFA rotator in-position +75.00 degrees 2011-Dec-09 05:19:45 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-09 05:19:45 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2011-Dec-09 05:19:45 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-09 05:19:45 STOP finish_task: Finishing task 'rotate ALFA to +75 degrees' 2011-Dec-09 05:19:45 LOG5 finish_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2011-Dec-09 05:19:45 INFO2 finish_task: DONE finished configuration: rotating ALFA to +75 degrees 2011-Dec-09 05:19:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 05:19:45 STOP end_task: Finishing task 'rotate ALFA to +75 degrees' with status 'OK' 2011-Dec-09 05:19:45 LOG5 end_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2011-Dec-09 05:19:45 START begin_task: Starting task 'waiting on telescope' 2011-Dec-09 05:19:45 LOG5 begin_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2011-Dec-09 05:19:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-09 05:19:45 LOG3 waittrk: Start waittrk 5 2011-Dec-09 05:19:45 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-09 05:19:45 LOG5 begin_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2011-Dec-09 05:19:51 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-09 05:19:51 LOG5 end_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2011-Dec-09 05:19:51 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-09 05:19:51 LOG5 begin_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2011-Dec-09 05:22:57 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-09 05:22:57 LOG5 end_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2011-Dec-09 05:22:57 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-09 05:22:58 INFO2 waittrk: Now tracking AGES3193_p1_095 2011-Dec-09 05:22:58 LOG4 waittrk: Current telescope position: Az = 121.78 ZA = 6.04 2011-Dec-09 05:22:58 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-09 05:22:58 LOG5 finish_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2011-Dec-09 05:22:58 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-09 05:22:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 05:22:58 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-09 05:22:58 LOG5 end_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2011-Dec-09 05:22:58 START begin_task: Starting task 'selecting calibration type' 2011-Dec-09 05:22:58 LOG5 begin_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2011-Dec-09 05:22:58 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-09 05:22:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-09 05:22:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 05:22:58 START begin_task: Starting task 'waiting on setcal' 2011-Dec-09 05:22:58 LOG5 begin_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2011-Dec-09 05:22:58 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-09 05:22:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 05:22:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 05:22:58 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-09 05:22:58 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-09 05:22:58 LOG5 end_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2011-Dec-09 05:22:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-09 05:22:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-09 05:22:58 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-09 05:22:58 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-09 05:22:58 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2011-Dec-09 05:22:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 05:22:59 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-09 05:22:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-09 05:22:59 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2011-Dec-09 05:22:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-09 05:22:59 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-09 05:22:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-09 05:22:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-09 05:22:59 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-09 05:22:59 LOG5 begin_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2011-Dec-09 05:22:59 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-09 05:22:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-09 05:22:59 LOG5 end_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2011-Dec-09 05:22:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-09 05:22:59 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-09 05:22:59 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-09 05:22:59 LOG5 end_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2011-Dec-09 05:22:59 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Dec-09 05:22:59 INFO2 astwait: Waiting for 456 seconds from 09:22:59 to 09:30:35 UTC ... 2011-Dec-09 05:22:59 LOG4 send_obs_status: To obs_status: <1> TASKTIME 456 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-09 05:22:59 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Dec-09 05:22:59 LOG5 begin_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2011-Dec-09 05:30:35 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Dec-09 05:30:35 LOG5 end_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2011-Dec-09 05:30:35 INFO3 astwait: Finished waiting 2011-Dec-09 05:30:35 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-09 05:30:35 LOG5 dopset_later: Calling 'dopset_later 61.319601206480371' 2011-Dec-09 05:30:35 INFO3 dopset_later: Setting Doppler correction for 05:31:35 (61.3 seconds from now) 2011-Dec-09 05:30:35 LOG5 antvel: Calling 'antvel 122.010000 6.039189 F Heliocentric 61.319601206480371' 2011-Dec-09 05:30:35 LOG2 antvel: Transforming current Az = 122.01 ZA = 6.04 to apparent RA = 09:53:41.4 Dec = +21:28:23.8 2011-Dec-09 05:30:35 LOG2 antvel: Parameters to Doppler: Heliocentric 34295 2011 343 0.0 2011-Dec-09 05:30:35 INFO5 antvel: Computed antenna velocity: -27.25819 km/s 2011-Dec-09 05:30:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-27.258194719500001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-09 05:30:35 INFO4 dopset_gen: New sky frequencies: 1381.369028 1381.369028 1381.369028 1381.369028 1381.369028 1381.369028 1381.369028 1381.369028 1381.369028 2011-Dec-09 05:30:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.369028 sky0=1381.369028 sky1=1381.369028 sky2=1381.369028 sky3=1381.369028 sky4=1381.369028 sky5=1381.369028 sky6=1381.369028 sky7=1381.369028 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 05:30:35 LOG2 dopset_gen: Result from 'sky2syn': 1631.369028 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 05:30:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631369028.0} 2011-Dec-09 05:30:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 05:30:35 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-09 05:30:35 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-09 05:30:35 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.0 Dec = +21:31:46.9 2011-Dec-09 05:30:35 LOG3 track_source: Calling 'track_source AGES3193_p1_095 095203.0 213146.9 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-09 05:30:35 START begin_task: Starting task 'sending tracking commands' 2011-Dec-09 05:30:35 LOG5 begin_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2011-Dec-09 05:30:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_095} INFO {Slewing to source 'AGES3193_p1_095' ...} 2011-Dec-09 05:30:35 INFO1 track_source: Starting to track AGES3193_p1_095 2011-Dec-09 05:30:35 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_095" 2011-Dec-09 05:30:35 LOG3 vw_send: To DATATAKING: set ra 095203.0 2011-Dec-09 05:30:35 LOG3 vw_send: To DATATAKING: set dec 213146.9 2011-Dec-09 05:30:35 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-09 05:30:35 LOG3 vw_send: To DATATAKING: pnt tr 095203.0 213146.9 -CJ 2011-Dec-09 05:30:35 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-09 05:30:35 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-09 05:30:35 LOG5 finish_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2011-Dec-09 05:30:35 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-09 05:30:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 05:30:35 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-09 05:30:35 LOG5 end_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2011-Dec-09 05:30:35 START begin_task: Starting task 'waiting on telescope' 2011-Dec-09 05:30:35 LOG5 begin_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2011-Dec-09 05:30:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-09 05:30:35 LOG3 waittrk: Start waittrk 5 2011-Dec-09 05:30:35 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-09 05:30:35 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2011-Dec-09 05:30:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631369028.0} 2011-Dec-09 05:30:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 05:30:35 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_095" 2011-Dec-09 05:30:35 LOG4 got_cormsg: From DATATAKING: set ra 095203.0 2011-Dec-09 05:30:35 LOG4 got_cormsg: From DATATAKING: set dec 213146.9 2011-Dec-09 05:30:35 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-09 05:30:35 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-09 05:30:35 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.0 213146.9 -CJ 2011-Dec-09 05:30:35 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-09 05:30:35 LOG4 got_cormsg: From DATATAKING: vw% 095203.0 2011-Dec-09 05:30:35 LOG4 got_cormsg: From DATATAKING: vw% 213146.9 2011-Dec-09 05:30:35 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2011-Dec-09 05:30:40 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-09 05:30:40 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2011-Dec-09 05:30:40 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-09 05:30:40 LOG5 begin_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2011-Dec-09 05:30:42 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-09 05:30:42 LOG5 end_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2011-Dec-09 05:30:42 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-09 05:30:42 INFO2 waittrk: Now tracking AGES3193_p1_095 2011-Dec-09 05:30:42 LOG4 waittrk: Current telescope position: Az = 121.67 ZA = 6.06 2011-Dec-09 05:30:42 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-09 05:30:42 LOG5 finish_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2011-Dec-09 05:30:42 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-09 05:30:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 05:30:42 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-09 05:30:42 LOG5 end_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2011-Dec-09 05:30:42 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-09 05:30:42 LOG5 begin_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2011-Dec-09 05:30:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-09 05:30:42 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-09 05:30:42 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-09 05:30:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-09 05:30:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 05:30:43 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-09 05:30:43 LOG5 begin_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2011-Dec-09 05:30:43 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-09 05:30:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 05:30:43 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 05:30:43 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-09 05:30:43 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-09 05:30:43 LOG5 end_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2011-Dec-09 05:30:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-09 05:30:43 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-09 05:30:43 LOG5 begin_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2011-Dec-09 05:30:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-09 05:30:43 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-09 05:30:43 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-09 05:30:43 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-09 05:30:43 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-09 05:30:43 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-09 05:30:43 LOG5 begin_task: Level: (5) ID = <10250> Status = 0 0 0 0 ok 2011-Dec-09 05:30:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-09 05:30:43 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 05:30:43 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 7 6 dB 2011-Dec-09 05:30:43 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 2 3 dB 2011-Dec-09 05:30:43 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 4 dB --- beam 3: 2 2 dB 2011-Dec-09 05:30:43 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2011-Dec-09 05:30:43 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-09 05:30:43 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-09 05:30:43 LOG5 end_task: Level: (5) ID = <10250> Status = 0 0 0 0 ok 2011-Dec-09 05:30:43 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.074 1.007 ALFA beam 1: 1.096 0.891 2011-Dec-09 05:30:43 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.089 0.948 ALFA beam 3: 1.010 1.056 2011-Dec-09 05:30:43 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.786 1.041 ALFA beam 5: 1.090 1.045 2011-Dec-09 05:30:43 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.994 0.014 ALFA beam 7: 1.082 0.014 2011-Dec-09 05:30:43 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-09 05:30:43 LOG5 finish_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2011-Dec-09 05:30:43 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-09 05:30:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 05:30:43 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-09 05:30:43 LOG5 end_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2011-Dec-09 05:30:43 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-09 05:30:43 LOG5 begin_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2011-Dec-09 05:30:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-09 05:30:44 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-09 05:30:44 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-09 05:30:44 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-09 05:30:44 LOG5 begin_task: Level: (5) ID = <10252> Status = 0 0 0 0 ok 2011-Dec-09 05:30:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-09 05:30:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 1.007 1.096 0.891 2011-Dec-09 05:30:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 0.948 1.010 1.056 2011-Dec-09 05:30:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 1.041 1.090 1.045 2011-Dec-09 05:30:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.994 0.014 1.082 0.014 2011-Dec-09 05:30:50 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.1 27.4 B 29.5 29.6 mn:A 0.1 0.0 B -0.4 -0.5 gn: 11 11 2011-Dec-09 05:30:50 INFO3 from_mock: From MOCK: b0s1g0 rms:A 19.8 18.9 B 24.4 25.8 mn:A 0.2 -0.6 B -0.4 0.2 gn: 8 10 2011-Dec-09 05:30:50 INFO3 from_mock: From MOCK: b1s0g0 rms:A 29.8 27.9 B 32.6 28.6 mn:A 0.5 0.6 B 0.1 -0.1 gn: 7 11 2011-Dec-09 05:30:50 INFO3 from_mock: From MOCK: b1s1g0 rms:A 27.5 25.3 B 22.6 22.6 mn:A -0.3 -0.3 B 0.6 0.1 gn: 7 7 2011-Dec-09 05:30:50 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.6 30.6 B 27.8 29.1 mn:A -0.0 -0.4 B 0.3 -0.1 gn: 11 11 2011-Dec-09 05:30:50 INFO3 from_mock: From MOCK: b2s1g0 rms:A 25.7 26.0 B 28.6 26.5 mn:A 0.3 -0.3 B 0.1 0.2 gn: 10 11 2011-Dec-09 05:30:50 INFO3 from_mock: From MOCK: b3s0g0 rms:A 28.4 28.2 B 30.4 27.1 mn:A 0.3 -0.3 B -0.1 -0.3 gn: 12 12 2011-Dec-09 05:30:50 INFO3 from_mock: From MOCK: b3s1g0 rms:A 23.5 22.9 B 29.0 30.2 mn:A -0.3 0.3 B -0.0 0.1 gn: 10 12 2011-Dec-09 05:30:50 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.3 28.5 B 30.6 30.8 mn:A -0.3 -0.3 B -0.5 -0.1 gn: 13 12 2011-Dec-09 05:30:50 INFO3 from_mock: From MOCK: b4s1g0 rms:A 28.6 25.9 B 26.4 25.5 mn:A -0.1 -0.1 B -0.4 0.1 gn: 15 12 2011-Dec-09 05:30:50 INFO3 from_mock: From MOCK: b5s0g0 rms:A 31.2 30.1 B 29.7 29.7 mn:A 0.7 0.4 B 0.1 0.5 gn: 13 11 2011-Dec-09 05:30:50 INFO3 from_mock: From MOCK: b5s1g0 rms:A 20.0 19.8 B 26.7 26.5 mn:A -0.3 0.4 B 0.1 0.3 gn: 9 10 2011-Dec-09 05:30:50 INFO3 from_mock: From MOCK: b6s0g0 rms:A 31.0 28.4 B 15.3 15.8 mn:A -0.4 0.2 B 0.4 -0.3 gn: 13 31 2011-Dec-09 05:30:50 INFO3 from_mock: From MOCK: b6s1g0 rms:A 22.7 20.7 B 12.3 11.9 mn:A 0.7 0.5 B 0.1 0.2 gn: 11 31 2011-Dec-09 05:30:50 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-09 05:30:50 LOG5 end_task: Level: (5) ID = <10252> Status = 0 0 0 0 ok 2011-Dec-09 05:30:50 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-09 05:30:50 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-09 05:30:50 LOG5 finish_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2011-Dec-09 05:30:50 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-09 05:30:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 05:30:50 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-09 05:30:50 LOG5 end_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2011-Dec-09 05:30:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-09 05:30:50 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-09 05:30:50 LOG5 finish_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2011-Dec-09 05:30:50 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-09 05:30:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 05:30:50 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-09 05:30:50 LOG5 end_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2011-Dec-09 05:30:50 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 CF 2011-Dec-09 05:30:50 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 CF 2011-Dec-09 05:30:50 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 CF 2011-Dec-09 05:30:50 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 CF 2011-Dec-09 05:30:51 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-09 05:30:51 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-09 05:30:51 LOG5 begin_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2011-Dec-09 05:30:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-09 05:30:51 START begin_task: Starting task 'selecting calibration type' 2011-Dec-09 05:30:51 LOG5 begin_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2011-Dec-09 05:30:51 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-09 05:30:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-09 05:30:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 05:30:51 START begin_task: Starting task 'waiting on setcal' 2011-Dec-09 05:30:51 LOG5 begin_task: Level: (5) ID = <10255> Status = 0 0 0 0 ok 2011-Dec-09 05:30:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 CF' 2011-Dec-09 05:30:51 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-09 05:30:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 05:30:51 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 05:30:51 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-09 05:30:51 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-09 05:30:51 LOG5 end_task: Level: (5) ID = <10255> Status = 0 0 0 0 ok 2011-Dec-09 05:30:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-09 05:30:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-09 05:30:51 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-09 05:30:51 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-09 05:30:51 LOG5 begin_task: Level: (5) ID = <10256> Status = 0 0 0 0 ok 2011-Dec-09 05:30:51 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 05:30:51 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-09 05:30:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-09 05:30:51 LOG5 end_task: Level: (5) ID = <10256> Status = 0 0 0 0 ok 2011-Dec-09 05:30:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-09 05:30:51 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-09 05:30:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-09 05:30:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-09 05:30:51 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-09 05:30:51 LOG5 begin_task: Level: (5) ID = <10257> Status = 0 0 0 0 ok 2011-Dec-09 05:30:51 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-09 05:30:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-09 05:30:51 LOG5 end_task: Level: (5) ID = <10257> Status = 0 0 0 0 ok 2011-Dec-09 05:30:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-09 05:30:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-09 05:30:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-09 05:30:51 LOG5 end_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2011-Dec-09 05:30:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-09 05:30:51 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-09 05:30:51 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-09 05:30:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-09 05:30:51 LOG5 begin_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2011-Dec-09 05:30:51 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-09 05:30:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-09 05:30:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-09 05:30:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-09 05:30:51 LOG5 end_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2011-Dec-09 05:30:51 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-09 05:30:51 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-09 05:30:51 LOG5 begin_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2011-Dec-09 05:30:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-09 05:30:51 LOG5 log_alfabeam: Parameters: 9.8674999999999997 21.529694444444441 10.249274 2011.9397118602174 74.999908 2011-Dec-09 05:30:51 LOG4 log_alfabeam: ALFABEAM 0 9.867500000000005 21.529694444444438 2011-Dec-09 05:30:51 LOG4 log_alfabeam: ALFABEAM 1 9.869934487845919 21.436633953857871 2011-Dec-09 05:30:51 LOG4 log_alfabeam: ALFABEAM 2 9.874736596579627 21.498582629364634 2011-Dec-09 05:30:51 LOG4 log_alfabeam: ALFABEAM 3 9.872390255742250 21.591887677811378 2011-Dec-09 05:30:51 LOG4 log_alfabeam: ALFABEAM 4 9.865161825062764 21.623791885488600 2011-Dec-09 05:30:51 LOG4 log_alfabeam: ALFABEAM 5 9.860237597602522 21.559997939390644 2011-Dec-09 05:30:51 LOG4 log_alfabeam: ALFABEAM 6 9.862664854579540 21.466142769728894 2011-Dec-09 05:30:51 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-09 05:30:51 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-09 05:30:51 LOG3 take_mock_data: PSET configuration: obsnm=CF 2011-Dec-09 05:30:51 LOG3 take_mock_data: PSET configuration: object=AGES3193_p1_095 2011-Dec-09 05:30:51 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-09 05:30:51 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-09 05:30:51 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-09 05:30:51 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-09 05:30:51 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-09 05:30:51 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-09 05:30:51 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-09 05:30:51 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-09 05:30:51 LOG3 take_mock_data: PSET configuration: patternid=134300228 2011-Dec-09 05:30:51 LOG3 take_mock_data: PSET configuration: scanid=134300229 2011-Dec-09 05:30:51 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-09 05:30:51 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-09 05:30:51 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-09 05:30:51 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456369028.0 2011-Dec-09 05:30:51 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306369028.0 2011-Dec-09 05:30:51 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-09 05:30:51 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-09 05:30:51 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=CF:object=AGES3193_p1_095:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=134300228:scanid=134300229:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456369028.0:topobfreqhz=1306369028.0:filetype=1 2011-Dec-09 05:30:51 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-09 05:30:51 LOG5 begin_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2011-Dec-09 05:30:52 LOG4 from_mock: From MOCK: psetok 2011-Dec-09 05:30:52 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-09 05:30:52 LOG5 end_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2011-Dec-09 05:30:52 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-09 05:30:52 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-09 05:30:52 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-09 05:30:52 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-09 05:30:52 LOG5 begin_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2011-Dec-09 05:30:52 NOTE WAPPDATA-new_file: New FITS file: wapp.20111209.a2048.0004.fits 2011-Dec-09 05:30:52 LOG4 from_mock: From MOCK: starok 2011-Dec-09 05:30:52 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-09 05:30:52 LOG5 end_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2011-Dec-09 05:30:52 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-09 05:30:52 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134300229 2011-Dec-09 05:30:52 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-09 05:30:52 LOG5 begin_task: Level: (5) ID = <10262> Status = 0 0 0 0 ok 2011-Dec-09 05:30:52 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111209.a2048.0004.fits} 2011-Dec-09 05:30:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 05:30:52 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-09 05:30:52 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-09 05:30:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-09 05:30:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 34253.00 2011-Dec-09 05:30:54 INFO2 got_mock_message: Mock spectrometer start file number is 00900 2011-Dec-09 05:30:54 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-09 05:30:54 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-09 05:30:54 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-09 05:30:54 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-09 05:30:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-09 05:30:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-09 05:30:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-09 05:30:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-09 05:30:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-09 05:30:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-09 05:30:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-09 05:30:54 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-09 05:30:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 05:30:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 05:30:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 05:30:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 05:30:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 05:30:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 05:30:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 05:30:57 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:30:57.02 2011-Dec-09 05:30:57 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323423057.02 Fri Dec 9 05:30:57 2011 2011-Dec-09 05:30:57 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-09 05:30:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.369028 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 05:30:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.369028 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 05:30:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.369028 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 05:30:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.369028 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 05:30:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.369028 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 05:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.553 (still bad) 2011-Dec-09 05:30:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.369028 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 05:30:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.369028 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 05:30:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.369028 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 05:30:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.369028 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 05:30:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 05:31:02 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-09 05:31:03 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-09 05:31:03 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-09 05:31:03 LOG5 end_task: Level: (5) ID = <10262> Status = 0 0 0 0 ok 2011-Dec-09 05:31:03 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-09 05:31:03 LOG5 end_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2011-Dec-09 05:31:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-09 05:31:03 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-09 05:31:03 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-09 05:31:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-09 05:31:03 LOG5 begin_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2011-Dec-09 05:31:03 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-09 05:31:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-09 05:31:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-09 05:31:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-09 05:31:03 LOG5 end_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2011-Dec-09 05:31:03 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-09 05:31:03 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-09 05:31:03 LOG5 begin_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2011-Dec-09 05:31:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-09 05:31:03 LOG5 log_alfabeam: Parameters: 9.8674999999999997 21.529694444444441 10.252338 2011.9397122087864 74.999908 2011-Dec-09 05:31:03 LOG4 log_alfabeam: ALFABEAM 0 9.867500000000012 21.529694444444445 2011-Dec-09 05:31:03 LOG4 log_alfabeam: ALFABEAM 1 9.869959210463756 21.436758977996995 2011-Dec-09 05:31:03 LOG4 log_alfabeam: ALFABEAM 2 9.874744998993499 21.498964433044929 2011-Dec-09 05:31:03 LOG4 log_alfabeam: ALFABEAM 3 9.872373321061286 21.592147639386120 2011-Dec-09 05:31:03 LOG4 log_alfabeam: ALFABEAM 4 9.865136186708124 21.623665487856826 2011-Dec-09 05:31:03 LOG4 log_alfabeam: ALFABEAM 5 9.860229566257619 21.559619304716474 2011-Dec-09 05:31:03 LOG4 log_alfabeam: ALFABEAM 6 9.862681835222299 21.465893795977109 2011-Dec-09 05:31:03 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-09 05:31:03 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-09 05:31:03 LOG3 take_mock_data: PSET configuration: obsnm=CF 2011-Dec-09 05:31:03 LOG3 take_mock_data: PSET configuration: object=AGES3193_p1_095 2011-Dec-09 05:31:03 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-09 05:31:03 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-09 05:31:03 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-09 05:31:03 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-09 05:31:03 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-09 05:31:03 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-09 05:31:03 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-09 05:31:03 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-09 05:31:03 LOG3 take_mock_data: PSET configuration: patternid=134300228 2011-Dec-09 05:31:03 LOG3 take_mock_data: PSET configuration: scanid=134300230 2011-Dec-09 05:31:03 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-09 05:31:03 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-09 05:31:03 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-09 05:31:03 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456369028.0 2011-Dec-09 05:31:03 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306369028.0 2011-Dec-09 05:31:03 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-09 05:31:03 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-09 05:31:03 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=CF:object=AGES3193_p1_095:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=134300228:scanid=134300230:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456369028.0:topobfreqhz=1306369028.0:filetype=1 2011-Dec-09 05:31:03 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-09 05:31:03 LOG5 begin_task: Level: (5) ID = <10265> Status = 0 0 0 0 ok 2011-Dec-09 05:31:03 LOG4 from_mock: From MOCK: psetok 2011-Dec-09 05:31:03 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-09 05:31:03 LOG5 end_task: Level: (5) ID = <10265> Status = 0 0 0 0 ok 2011-Dec-09 05:31:03 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-09 05:31:03 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-09 05:31:03 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-09 05:31:03 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-09 05:31:03 LOG5 begin_task: Level: (5) ID = <10266> Status = 0 0 0 0 ok 2011-Dec-09 05:31:03 LOG4 from_mock: From MOCK: starok 2011-Dec-09 05:31:03 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-09 05:31:03 LOG5 end_task: Level: (5) ID = <10266> Status = 0 0 0 0 ok 2011-Dec-09 05:31:03 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-09 05:31:03 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134300230 2011-Dec-09 05:31:03 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-09 05:31:03 LOG5 begin_task: Level: (5) ID = <10267> Status = 0 0 0 0 ok 2011-Dec-09 05:31:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 05:31:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-09 05:31:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 34264.00 2011-Dec-09 05:31:04 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-09 05:31:04 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-09 05:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.553 (still bad) 2011-Dec-09 05:31:06 INFO2 got_mock_message: Mock spectrometer start file number is 01000 2011-Dec-09 05:31:06 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-09 05:31:06 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-09 05:31:06 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-09 05:31:06 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-09 05:31:06 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-09 05:31:06 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-09 05:31:06 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-09 05:31:06 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-09 05:31:06 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-09 05:31:06 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-09 05:31:06 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-09 05:31:06 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-09 05:31:06 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 05:31:06 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 05:31:06 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 05:31:06 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 05:31:06 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 05:31:06 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 05:31:06 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 05:31:09 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:31:09.01 2011-Dec-09 05:31:09 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323423069.01 Fri Dec 9 05:31:09 2011 2011-Dec-09 05:31:09 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-09 05:31:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.369028 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 05:31:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.369028 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 05:31:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.369028 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 05:31:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.369028 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 05:31:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.369028 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 05:31:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.369028 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 05:31:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.369028 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 05:31:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.369028 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 05:31:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.369028 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 05:31:09 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-09 05:31:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 05:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-09 05:31:15 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-09 05:31:15 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-09 05:31:15 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-09 05:31:15 LOG5 end_task: Level: (5) ID = <10267> Status = 0 0 0 0 ok 2011-Dec-09 05:31:15 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-09 05:31:15 LOG5 end_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2011-Dec-09 05:31:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-09 05:31:15 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-09 05:31:15 LOG5 finish_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2011-Dec-09 05:31:15 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-09 05:31:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 05:31:15 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-09 05:31:15 LOG5 end_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2011-Dec-09 05:31:15 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-09 05:31:15 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 122.01 and ZA = 6.04 2011-Dec-09 05:31:15 LOG3 track_source: Calling 'track_source AGES3193_p1_095 122.01 6.0391887116 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-09 05:31:15 START begin_task: Starting task 'sending tracking commands' 2011-Dec-09 05:31:15 LOG5 begin_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2011-Dec-09 05:31:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_095} INFO {Slewing to source 'AGES3193_p1_095' ...} 2011-Dec-09 05:31:15 INFO1 track_source: Starting to track AGES3193_p1_095 2011-Dec-09 05:31:15 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_095" 2011-Dec-09 05:31:15 LOG3 vw_send: To DATATAKING: set ra 122.01 2011-Dec-09 05:31:15 LOG3 vw_send: To DATATAKING: set dec 6.0391887116 2011-Dec-09 05:31:15 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-09 05:31:15 LOG3 vw_send: To DATATAKING: pnt tr 122.01 6.0391887116 -CF 2011-Dec-09 05:31:15 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-09 05:31:15 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-09 05:31:15 LOG5 finish_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2011-Dec-09 05:31:15 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-09 05:31:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 05:31:15 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-09 05:31:15 LOG5 end_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2011-Dec-09 05:31:15 LOG1 fixed_driftmap: Parameters: HA = +00:22:00.3 Start = 10:15:41.8 LST = 10:15:20.5 diff = 21.4 secs 2011-Dec-09 05:31:15 INFO2 fixed_driftmap: Waiting 19.4 seconds for RA 9:53:42 2011-Dec-09 05:31:15 INFO2 lstwait: Waiting for 19.3 secs from LST 10:15:20 to LST 10:15:40 ... 2011-Dec-09 05:31:15 LOG4 send_obs_status: To obs_status: <1> TASKTIME 19.323381626961705 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-09 05:31:15 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-09 05:31:15 LOG5 begin_task: Level: (3) ID = <10269> Status = 0 0 0 0 ok 2011-Dec-09 05:31:15 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_095" 2011-Dec-09 05:31:15 LOG4 got_cormsg: From DATATAKING: set ra 122.01 2011-Dec-09 05:31:15 LOG4 got_cormsg: From DATATAKING: set dec 6.0391887116 2011-Dec-09 05:31:15 LOG4 got_cormsg: From DATATAKING: vw% 122.01 2011-Dec-09 05:31:15 LOG4 got_cormsg: From DATATAKING: vw% 6.0391887116 2011-Dec-09 05:31:15 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 05:31:15 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-09 05:31:15 LOG4 got_cormsg: From DATATAKING: pnt tr 122.01 6.0391887116 -CF 2011-Dec-09 05:31:15 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-09 05:31:15 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-09 05:31:15 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 05:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2011-Dec-09 05:31:34 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-09 05:31:34 LOG5 end_task: Level: (3) ID = <10269> Status = 0 0 0 0 ok 2011-Dec-09 05:31:34 LOG4 lstwait: Finished waiting 0.68 seconds late 2011-Dec-09 05:31:34 INFO3 lstwait: Finished waiting 2011-Dec-09 05:31:34 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-09 05:31:34 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-09 05:31:34 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-09 05:31:34 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-09 05:31:34 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-09 05:31:34 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-09 05:31:34 LOG5 begin_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2011-Dec-09 05:31:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-09 05:31:35 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-09 05:31:35 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-09 05:31:35 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-09 05:31:35 LOG3 take_mock_data: PSET configuration: obsnm=CF 2011-Dec-09 05:31:35 LOG3 take_mock_data: PSET configuration: object=AGES3193_p1_095 2011-Dec-09 05:31:35 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-09 05:31:35 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-09 05:31:35 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-09 05:31:35 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-09 05:31:35 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-09 05:31:35 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-09 05:31:35 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-09 05:31:35 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-09 05:31:35 LOG3 take_mock_data: PSET configuration: patternid=134300231 2011-Dec-09 05:31:35 LOG3 take_mock_data: PSET configuration: scanid=134300231 2011-Dec-09 05:31:35 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-09 05:31:35 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-09 05:31:35 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-09 05:31:35 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456369028.0 2011-Dec-09 05:31:35 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306369028.0 2011-Dec-09 05:31:35 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-09 05:31:35 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-09 05:31:35 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=CF:object=AGES3193_p1_095:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=134300231:scanid=134300231:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456369028.0:topobfreqhz=1306369028.0:filetype=1 2011-Dec-09 05:31:35 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-09 05:31:35 LOG5 begin_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2011-Dec-09 05:31:35 LOG4 from_mock: From MOCK: psetok 2011-Dec-09 05:31:35 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-09 05:31:35 LOG5 end_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2011-Dec-09 05:31:35 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-09 05:31:35 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-09 05:31:35 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-09 05:31:35 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-09 05:31:35 LOG5 begin_task: Level: (4) ID = <10272> Status = 0 0 0 0 ok 2011-Dec-09 05:31:35 LOG4 from_mock: From MOCK: starok 2011-Dec-09 05:31:35 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-09 05:31:35 LOG5 end_task: Level: (4) ID = <10272> Status = 0 0 0 0 ok 2011-Dec-09 05:31:35 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-09 05:31:35 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 134300231 2011-Dec-09 05:31:35 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-09 05:31:35 LOG5 begin_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2011-Dec-09 05:31:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 05:31:35 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-09 05:31:35 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-09 05:31:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-09 05:31:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 34296.00 2011-Dec-09 05:31:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.369028 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 05:31:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.369028 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 05:31:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.369028 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 05:31:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.369028 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 05:31:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.369028 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 05:31:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.369028 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 05:31:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.369028 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 05:31:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.369028 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 05:31:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.369028 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 05:31:37 INFO2 got_mock_message: Mock spectrometer start file number is 01100 2011-Dec-09 05:31:37 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-09 05:31:37 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2011-Dec-09 05:31:37 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-09 05:31:37 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-09 05:31:37 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-09 05:31:37 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-09 05:31:37 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-09 05:31:37 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-09 05:31:37 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-09 05:31:37 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-09 05:31:37 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-09 05:31:37 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-09 05:31:37 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 05:31:37 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 05:31:37 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 05:31:37 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 05:31:37 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 05:31:37 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 05:31:37 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 05:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2011-Dec-09 05:31:40 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:31:40.02 2011-Dec-09 05:31:40 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323423100.02 Fri Dec 9 05:31:40 2011 2011-Dec-09 05:31:40 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-09 05:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2011-Dec-09 05:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2011-Dec-09 05:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2011-Dec-09 05:31:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-09 05:31:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 1.004 1.092 0.889 2011-Dec-09 05:31:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 0.945 1.007 1.053 2011-Dec-09 05:31:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 1.039 1.089 1.047 2011-Dec-09 05:31:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.992 0.014 1.080 0.014 2011-Dec-09 05:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2011-Dec-09 05:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 05:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 05:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2011-Dec-09 05:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2011-Dec-09 05:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2011-Dec-09 05:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2011-Dec-09 05:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2011-Dec-09 05:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2011-Dec-09 05:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2011-Dec-09 05:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.123 (still bad) 2011-Dec-09 05:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2011-Dec-09 05:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.129 (still bad) 2011-Dec-09 05:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2011-Dec-09 05:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2011-Dec-09 05:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2011-Dec-09 05:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2011-Dec-09 05:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2011-Dec-09 05:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.126 (still bad) 2011-Dec-09 05:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2011-Dec-09 05:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-09 05:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2011-Dec-09 05:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-09 05:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2011-Dec-09 05:32:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-09 05:32:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.082 1.010 1.118 0.906 2011-Dec-09 05:32:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.092 0.949 1.017 1.060 2011-Dec-09 05:32:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.788 1.041 1.092 1.052 2011-Dec-09 05:32:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.003 0.026 1.093 0.026 2011-Dec-09 05:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2011-Dec-09 05:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.106 (still bad) 2011-Dec-09 05:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.105 (still bad) 2011-Dec-09 05:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.102 (still bad) 2011-Dec-09 05:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.100 (still bad) 2011-Dec-09 05:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2011-Dec-09 05:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2011-Dec-09 05:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2011-Dec-09 05:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.111 (still bad) 2011-Dec-09 05:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2011-Dec-09 05:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2011-Dec-09 05:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2011-Dec-09 05:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2011-Dec-09 05:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 05:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2011-Dec-09 05:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2011-Dec-09 05:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 05:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 05:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 05:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2011-Dec-09 05:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2011-Dec-09 05:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2011-Dec-09 05:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 05:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 05:33:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-09 05:33:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.081 1.010 1.103 0.893 2011-Dec-09 05:33:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.092 0.950 1.014 1.061 2011-Dec-09 05:33:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.789 1.048 1.095 1.055 2011-Dec-09 05:33:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.002 0.027 1.091 0.027 2011-Dec-09 05:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 05:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2011-Dec-09 05:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2011-Dec-09 05:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2011-Dec-09 05:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2011-Dec-09 05:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2011-Dec-09 05:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-09 05:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 05:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 05:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2011-Dec-09 05:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 05:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.108 (still bad) 2011-Dec-09 05:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.099 (still bad) 2011-Dec-09 05:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.099 (still bad) 2011-Dec-09 05:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.101 (still bad) 2011-Dec-09 05:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.099 (still bad) 2011-Dec-09 05:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.100 (still bad) 2011-Dec-09 05:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2011-Dec-09 05:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 05:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 05:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 05:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 05:34:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-09 05:34:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 1.016 1.104 0.896 2011-Dec-09 05:34:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 0.953 1.012 1.058 2011-Dec-09 05:34:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.787 1.042 1.091 1.049 2011-Dec-09 05:34:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.003 0.027 1.090 0.028 2011-Dec-09 05:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 05:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 05:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 05:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-09 05:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 05:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 05:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 05:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2011-Dec-09 05:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 05:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 05:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2011-Dec-09 05:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 05:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2011-Dec-09 05:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2011-Dec-09 05:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 05:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-09 05:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 05:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 05:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 05:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 05:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 05:35:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-09 05:35:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 1.009 1.099 0.893 2011-Dec-09 05:35:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.095 0.957 1.018 1.065 2011-Dec-09 05:35:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.787 1.040 1.088 1.050 2011-Dec-09 05:35:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.999 0.027 1.086 0.027 2011-Dec-09 05:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 05:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2011-Dec-09 05:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2011-Dec-09 05:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 05:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2011-Dec-09 05:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 05:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2011-Dec-09 05:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 05:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 05:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2011-Dec-09 05:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 05:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 05:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2011-Dec-09 05:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2011-Dec-09 05:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2011-Dec-09 05:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 05:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2011-Dec-09 05:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2011-Dec-09 05:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 05:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2011-Dec-09 05:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 05:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2011-Dec-09 05:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2011-Dec-09 05:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 05:36:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-09 05:36:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.004 1.094 0.889 2011-Dec-09 05:36:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.082 0.946 1.006 1.051 2011-Dec-09 05:36:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.783 1.036 1.083 1.043 2011-Dec-09 05:36:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.996 0.027 1.082 0.028 2011-Dec-09 05:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2011-Dec-09 05:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2011-Dec-09 05:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2011-Dec-09 05:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 05:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.093 (still bad) 2011-Dec-09 05:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2011-Dec-09 05:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-09 05:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.095 (still bad) 2011-Dec-09 05:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.096 (still bad) 2011-Dec-09 05:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.094 (still bad) 2011-Dec-09 05:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-09 05:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.100 (still bad) 2011-Dec-09 05:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-09 05:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-09 05:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2011-Dec-09 05:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-09 05:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-09 05:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.099 (still bad) 2011-Dec-09 05:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.095 (still bad) 2011-Dec-09 05:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.095 (still bad) 2011-Dec-09 05:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2011-Dec-09 05:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.096 (still bad) 2011-Dec-09 05:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.097 (still bad) 2011-Dec-09 05:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2011-Dec-09 05:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2011-Dec-09 05:37:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-09 05:37:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.003 1.098 0.889 2011-Dec-09 05:37:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 0.944 1.009 1.052 2011-Dec-09 05:37:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.784 1.036 1.086 1.046 2011-Dec-09 05:37:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.994 0.026 1.083 0.026 2011-Dec-09 05:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2011-Dec-09 05:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2011-Dec-09 05:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2011-Dec-09 05:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2011-Dec-09 05:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 05:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 05:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2011-Dec-09 05:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2011-Dec-09 05:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 05:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2011-Dec-09 05:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2011-Dec-09 05:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 05:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2011-Dec-09 05:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 05:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2011-Dec-09 05:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2011-Dec-09 05:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2011-Dec-09 05:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 05:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2011-Dec-09 05:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.104 (still bad) 2011-Dec-09 05:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2011-Dec-09 05:38:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2011-Dec-09 05:38:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.003 1.096 0.888 2011-Dec-09 05:38:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.082 0.944 1.010 1.054 2011-Dec-09 05:38:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.783 1.038 1.085 1.044 2011-Dec-09 05:38:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.995 0.028 1.085 0.019 2011-Dec-09 05:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2011-Dec-09 05:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.094 (still bad) 2011-Dec-09 05:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2011-Dec-09 05:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2011-Dec-09 05:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.096 (still bad) 2011-Dec-09 05:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-09 05:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.096 (still bad) 2011-Dec-09 05:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2011-Dec-09 05:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-09 05:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.105 (still bad) 2011-Dec-09 05:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.105 (still bad) 2011-Dec-09 05:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.109 (still bad) 2011-Dec-09 05:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.109 (still bad) 2011-Dec-09 05:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.107 (still bad) 2011-Dec-09 05:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.110 (still bad) 2011-Dec-09 05:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-09 05:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-09 05:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-09 05:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-09 05:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-09 05:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2011-Dec-09 05:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2011-Dec-09 05:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 05:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 05:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 05:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 05:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 05:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2011-Dec-09 05:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:39:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-09 05:39:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 1.003 1.096 0.888 2011-Dec-09 05:39:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.079 0.944 1.010 1.054 2011-Dec-09 05:39:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.782 1.037 1.086 1.046 2011-Dec-09 05:39:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.005 0.027 1.096 0.027 2011-Dec-09 05:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2011-Dec-09 05:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2011-Dec-09 05:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 05:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2011-Dec-09 05:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 05:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 05:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 05:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.098 (still bad) 2011-Dec-09 05:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.098 (still bad) 2011-Dec-09 05:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.094 (still bad) 2011-Dec-09 05:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.098 (still bad) 2011-Dec-09 05:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2011-Dec-09 05:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2011-Dec-09 05:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.103 (still bad) 2011-Dec-09 05:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2011-Dec-09 05:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2011-Dec-09 05:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.101 (still bad) 2011-Dec-09 05:40:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2011-Dec-09 05:40:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.004 1.097 0.887 2011-Dec-09 05:40:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 0.945 1.009 1.053 2011-Dec-09 05:40:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.784 1.035 1.083 1.045 2011-Dec-09 05:40:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.994 0.028 1.083 0.028 2011-Dec-09 05:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.096 (still bad) 2011-Dec-09 05:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.104 (still bad) 2011-Dec-09 05:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2011-Dec-09 05:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2011-Dec-09 05:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.100 (still bad) 2011-Dec-09 05:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.098 (still bad) 2011-Dec-09 05:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2011-Dec-09 05:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.104 (still bad) 2011-Dec-09 05:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2011-Dec-09 05:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2011-Dec-09 05:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2011-Dec-09 05:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2011-Dec-09 05:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2011-Dec-09 05:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.104 (still bad) 2011-Dec-09 05:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2011-Dec-09 05:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-09 05:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2011-Dec-09 05:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-09 05:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-09 05:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.105 (still bad) 2011-Dec-09 05:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2011-Dec-09 05:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2011-Dec-09 05:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2011-Dec-09 05:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2011-Dec-09 05:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2011-Dec-09 05:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.105 (still bad) 2011-Dec-09 05:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2011-Dec-09 05:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.094 (still bad) 2011-Dec-09 05:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-09 05:41:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-09 05:41:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.005 1.096 0.888 2011-Dec-09 05:41:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 0.945 1.011 1.053 2011-Dec-09 05:41:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.784 1.039 1.085 1.044 2011-Dec-09 05:41:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.995 0.028 1.083 0.020 2011-Dec-09 05:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-09 05:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.103 (still bad) 2011-Dec-09 05:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2011-Dec-09 05:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.094 (still bad) 2011-Dec-09 05:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-09 05:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.096 (still bad) 2011-Dec-09 05:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-09 05:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2011-Dec-09 05:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 05:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 05:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2011-Dec-09 05:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.100 (still bad) 2011-Dec-09 05:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-09 05:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.096 (still bad) 2011-Dec-09 05:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-09 05:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.095 (still bad) 2011-Dec-09 05:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-09 05:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2011-Dec-09 05:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.095 (still bad) 2011-Dec-09 05:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.095 (still bad) 2011-Dec-09 05:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.098 (still bad) 2011-Dec-09 05:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.096 (still bad) 2011-Dec-09 05:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.097 (still bad) 2011-Dec-09 05:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2011-Dec-09 05:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2011-Dec-09 05:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2011-Dec-09 05:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2011-Dec-09 05:43:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-09 05:43:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.006 1.096 0.889 2011-Dec-09 05:43:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 0.946 1.011 1.055 2011-Dec-09 05:43:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.784 1.040 1.086 1.045 2011-Dec-09 05:43:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.995 0.026 1.083 0.026 2011-Dec-09 05:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2011-Dec-09 05:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2011-Dec-09 05:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 05:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 05:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2011-Dec-09 05:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 05:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 05:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2011-Dec-09 05:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 05:43:28 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 05:43:28.304 (seconds: 20608.304)!} 2011-Dec-09 05:43:28 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 05:43:28.304 (seconds: 20608.304)! 2011-Dec-09 05:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2011-Dec-09 05:43:29 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 20607.0 to 20608.0! 2011-Dec-09 05:43:30 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (20607.0 - 20609.0)! 2011-Dec-09 05:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 05:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 05:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.104 (still bad) 2011-Dec-09 05:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.096 (still bad) 2011-Dec-09 05:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.096 (still bad) 2011-Dec-09 05:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.100 (still bad) 2011-Dec-09 05:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.096 (still bad) 2011-Dec-09 05:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.098 (still bad) 2011-Dec-09 05:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2011-Dec-09 05:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 05:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 05:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:44:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-09 05:44:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.004 1.101 0.889 2011-Dec-09 05:44:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 0.948 1.011 1.055 2011-Dec-09 05:44:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 1.042 1.086 1.045 2011-Dec-09 05:44:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.999 0.027 1.087 0.027 2011-Dec-09 05:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.100 (still bad) 2011-Dec-09 05:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2011-Dec-09 05:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.099 (still bad) 2011-Dec-09 05:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.099 (still bad) 2011-Dec-09 05:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.098 (still bad) 2011-Dec-09 05:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.100 (still bad) 2011-Dec-09 05:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.099 (still bad) 2011-Dec-09 05:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2011-Dec-09 05:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.101 (still bad) 2011-Dec-09 05:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2011-Dec-09 05:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2011-Dec-09 05:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.101 (still bad) 2011-Dec-09 05:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.098 (still bad) 2011-Dec-09 05:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2011-Dec-09 05:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.098 (still bad) 2011-Dec-09 05:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.098 (still bad) 2011-Dec-09 05:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.096 (still bad) 2011-Dec-09 05:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.096 (still bad) 2011-Dec-09 05:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2011-Dec-09 05:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2011-Dec-09 05:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2011-Dec-09 05:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 05:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2011-Dec-09 05:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2011-Dec-09 05:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.095 (still bad) 2011-Dec-09 05:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.096 (still bad) 2011-Dec-09 05:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.096 (still bad) 2011-Dec-09 05:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.096 (still bad) 2011-Dec-09 05:45:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2011-Dec-09 05:45:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.005 1.098 0.889 2011-Dec-09 05:45:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.097 0.959 1.016 1.061 2011-Dec-09 05:45:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.789 1.049 1.093 1.050 2011-Dec-09 05:45:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.997 0.028 1.085 0.028 2011-Dec-09 05:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-09 05:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-09 05:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-09 05:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-09 05:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-09 05:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-09 05:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.102 (still bad) 2011-Dec-09 05:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.097 (still bad) 2011-Dec-09 05:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2011-Dec-09 05:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2011-Dec-09 05:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.096 (still bad) 2011-Dec-09 05:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.099 (still bad) 2011-Dec-09 05:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-09 05:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.096 (still bad) 2011-Dec-09 05:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-09 05:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-09 05:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.095 (still bad) 2011-Dec-09 05:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2011-Dec-09 05:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-09 05:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.096 (still bad) 2011-Dec-09 05:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-09 05:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.094 (still bad) 2011-Dec-09 05:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.095 (still bad) 2011-Dec-09 05:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.103 (still bad) 2011-Dec-09 05:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2011-Dec-09 05:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2011-Dec-09 05:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2011-Dec-09 05:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2011-Dec-09 05:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2011-Dec-09 05:46:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-09 05:46:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.083 1.008 1.103 0.895 2011-Dec-09 05:46:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.082 0.947 1.010 1.054 2011-Dec-09 05:46:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.788 1.044 1.094 1.053 2011-Dec-09 05:46:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.999 0.027 1.089 0.027 2011-Dec-09 05:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2011-Dec-09 05:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2011-Dec-09 05:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 05:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2011-Dec-09 05:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 05:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 05:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 05:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 05:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 05:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 05:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 05:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.099 (still bad) 2011-Dec-09 05:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.096 (still bad) 2011-Dec-09 05:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.095 (still bad) 2011-Dec-09 05:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.095 (still bad) 2011-Dec-09 05:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.095 (still bad) 2011-Dec-09 05:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.096 (still bad) 2011-Dec-09 05:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.098 (still bad) 2011-Dec-09 05:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2011-Dec-09 05:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2011-Dec-09 05:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2011-Dec-09 05:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2011-Dec-09 05:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2011-Dec-09 05:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 05:47:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-09 05:47:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.002 1.096 0.889 2011-Dec-09 05:47:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 0.957 1.006 1.052 2011-Dec-09 05:47:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.783 1.037 1.085 1.044 2011-Dec-09 05:47:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.997 0.027 1.087 0.027 2011-Dec-09 05:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 05:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2011-Dec-09 05:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2011-Dec-09 05:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2011-Dec-09 05:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2011-Dec-09 05:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2011-Dec-09 05:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.123 (still bad) 2011-Dec-09 05:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.127 (still bad) 2011-Dec-09 05:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.124 (still bad) 2011-Dec-09 05:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.123 (still bad) 2011-Dec-09 05:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2011-Dec-09 05:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2011-Dec-09 05:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2011-Dec-09 05:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.100 (still bad) 2011-Dec-09 05:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.096 (still bad) 2011-Dec-09 05:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2011-Dec-09 05:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-09 05:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-09 05:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-09 05:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2011-Dec-09 05:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2011-Dec-09 05:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.105 (still bad) 2011-Dec-09 05:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2011-Dec-09 05:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 05:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 05:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 05:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 05:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2011-Dec-09 05:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 05:48:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-09 05:48:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.006 1.096 0.890 2011-Dec-09 05:48:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 0.948 1.010 1.054 2011-Dec-09 05:48:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.783 1.039 1.097 1.055 2011-Dec-09 05:48:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.999 0.027 1.087 0.028 2011-Dec-09 05:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2011-Dec-09 05:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2011-Dec-09 05:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2011-Dec-09 05:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2011-Dec-09 05:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2011-Dec-09 05:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.102 (still bad) 2011-Dec-09 05:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.103 (still bad) 2011-Dec-09 05:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2011-Dec-09 05:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2011-Dec-09 05:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2011-Dec-09 05:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2011-Dec-09 05:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2011-Dec-09 05:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2011-Dec-09 05:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2011-Dec-09 05:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2011-Dec-09 05:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.100 (still bad) 2011-Dec-09 05:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.100 (still bad) 2011-Dec-09 05:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-09 05:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.100 (still bad) 2011-Dec-09 05:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-09 05:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-09 05:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.101 (still bad) 2011-Dec-09 05:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2011-Dec-09 05:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-09 05:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.100 (still bad) 2011-Dec-09 05:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.096 (still bad) 2011-Dec-09 05:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-09 05:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.105 (still bad) 2011-Dec-09 05:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.099 (still bad) 2011-Dec-09 05:49:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2011-Dec-09 05:49:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.006 1.099 0.889 2011-Dec-09 05:49:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.082 0.947 1.009 1.055 2011-Dec-09 05:49:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 1.046 1.090 1.049 2011-Dec-09 05:49:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.996 0.021 1.086 0.022 2011-Dec-09 05:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.102 (still bad) 2011-Dec-09 05:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.099 (still bad) 2011-Dec-09 05:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.100 (still bad) 2011-Dec-09 05:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.105 (still bad) 2011-Dec-09 05:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-09 05:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-09 05:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-09 05:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.096 (still bad) 2011-Dec-09 05:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-09 05:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.107 (still bad) 2011-Dec-09 05:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2011-Dec-09 05:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.096 (still bad) 2011-Dec-09 05:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.097 (still bad) 2011-Dec-09 05:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.094 (still bad) 2011-Dec-09 05:49:38 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.097 (still bad) 2011-Dec-09 05:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.102 (still bad) 2011-Dec-09 05:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2011-Dec-09 05:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.094 (still bad) 2011-Dec-09 05:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2011-Dec-09 05:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2011-Dec-09 05:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2011-Dec-09 05:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.104 (still bad) 2011-Dec-09 05:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.096 (still bad) 2011-Dec-09 05:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.095 (still bad) 2011-Dec-09 05:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-09 05:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.095 (still bad) 2011-Dec-09 05:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-09 05:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.103 (still bad) 2011-Dec-09 05:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.097 (still bad) 2011-Dec-09 05:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.096 (still bad) 2011-Dec-09 05:50:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2011-Dec-09 05:50:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.082 1.009 1.097 0.891 2011-Dec-09 05:50:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 0.949 1.010 1.057 2011-Dec-09 05:50:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.790 1.051 1.089 1.049 2011-Dec-09 05:50:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.997 0.020 1.085 0.022 2011-Dec-09 05:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.095 (still bad) 2011-Dec-09 05:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.096 (still bad) 2011-Dec-09 05:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.103 (still bad) 2011-Dec-09 05:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.094 (still bad) 2011-Dec-09 05:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.096 (still bad) 2011-Dec-09 05:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2011-Dec-09 05:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2011-Dec-09 05:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2011-Dec-09 05:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.104 (still bad) 2011-Dec-09 05:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-09 05:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-09 05:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2011-Dec-09 05:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2011-Dec-09 05:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2011-Dec-09 05:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.106 (still bad) 2011-Dec-09 05:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2011-Dec-09 05:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2011-Dec-09 05:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2011-Dec-09 05:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.096 (still bad) 2011-Dec-09 05:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.096 (still bad) 2011-Dec-09 05:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-09 05:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-09 05:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-09 05:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-09 05:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-09 05:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2011-Dec-09 05:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2011-Dec-09 05:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2011-Dec-09 05:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2011-Dec-09 05:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2011-Dec-09 05:51:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2011-Dec-09 05:51:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.005 1.098 0.891 2011-Dec-09 05:51:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 0.950 1.010 1.054 2011-Dec-09 05:51:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.782 1.039 1.085 1.046 2011-Dec-09 05:51:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.997 0.028 1.083 0.019 2011-Dec-09 05:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2011-Dec-09 05:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.099 (still bad) 2011-Dec-09 05:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.099 (still bad) 2011-Dec-09 05:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.099 (still bad) 2011-Dec-09 05:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.100 (still bad) 2011-Dec-09 05:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2011-Dec-09 05:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.100 (still bad) 2011-Dec-09 05:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2011-Dec-09 05:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-09 05:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2011-Dec-09 05:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2011-Dec-09 05:51:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 05:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.096 (still bad) 2011-Dec-09 05:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.096 (still bad) 2011-Dec-09 05:51:41 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-09 05:51:41 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-09 05:51:41 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-09 05:51:41 LOG5 end_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2011-Dec-09 05:51:41 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-09 05:51:41 LOG5 end_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2011-Dec-09 05:51:41 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-09 05:51:41 LOG5 finish_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2011-Dec-09 05:51:41 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-09 05:51:41 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-09 05:51:41 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-09 05:51:41 LOG5 end_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2011-Dec-09 05:51:41 COMMAND run_command_line: EXECUTING command 58: 'ENDIF' 2011-Dec-09 05:51:41 COMMAND run_command_line: EXECUTING command 61: 'IF LSTSLEW(AGES3193_p1_097) < 104841 THEN' 2011-Dec-09 05:51:41 LOG3 is_if_valid: Current source data: up 109.0 10.4 UP - - 41 1.8 2011-Dec-09 05:51:41 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p1_097) < 104841 2011-Dec-09 05:51:41 INFO5 is_if_valid: Condition parsed as: 10.627168999999999 < 10.811388888888889 2011-Dec-09 05:51:41 COMMAND run_command_line: EXECUTING command 62: 'FIXEDDRIFT az=105.64 alfaangle=-83.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p1_097 ra=95300.00 dec=212900.00' 2011-Dec-09 05:51:41 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Dec-09 05:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.096 (still bad) 2011-Dec-09 05:51:42 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Dec-09 05:51:42 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 105.64 -83.6 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p1_097 95300.00 212900.00 J 8500.0 Heliocentric velocity(optical)' 2011-Dec-09 05:51:42 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Dec-09 05:51:42 LOG5 begin_task: Level: (2) ID = <10274> Status = 0 0 0 0 ok 2011-Dec-09 05:51:42 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p1_095' 2011-Dec-09 05:51:42 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Dec-09 05:51:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p1_097} 2011-Dec-09 05:51:42 INFO3 fixed_driftmap: Sending telescope to Az = 105.64 and ZA = 13.28 2011-Dec-09 05:51:42 LOG3 track_source: Calling 'track_source AGES3193_p1_097 105.64 13.2843993497 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-09 05:51:42 START begin_task: Starting task 'sending tracking commands' 2011-Dec-09 05:51:42 LOG5 begin_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2011-Dec-09 05:51:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_097} INFO {Slewing to source 'AGES3193_p1_097' ...} 2011-Dec-09 05:51:42 INFO1 track_source: Starting to track AGES3193_p1_097 2011-Dec-09 05:51:42 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_097" 2011-Dec-09 05:51:42 LOG3 vw_send: To DATATAKING: set ra 105.64 2011-Dec-09 05:51:42 LOG3 vw_send: To DATATAKING: set dec 13.2843993497 2011-Dec-09 05:51:42 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-09 05:51:42 LOG3 vw_send: To DATATAKING: pnt tr 105.64 13.2843993497 -CF 2011-Dec-09 05:51:42 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-09 05:51:42 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-09 05:51:42 LOG5 finish_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2011-Dec-09 05:51:42 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-09 05:51:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 05:51:42 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-09 05:51:42 LOG5 end_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2011-Dec-09 05:51:42 START begin_task: Starting task 'rotate ALFA to -83.6 degrees' 2011-Dec-09 05:51:42 LOG5 begin_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2011-Dec-09 05:51:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -83.6 degrees ...} 2011-Dec-09 05:51:42 INFO2 rotate_alfa: ALFA commanded to -83.6 degrees 2011-Dec-09 05:51:42 LOG3 sock_errsend: To ALFAMOTOR: POSITION -83.6 REPLY 2011-Dec-09 05:51:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Dec-09 05:51:42 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Dec-09 05:51:42 LOG5 begin_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2011-Dec-09 05:51:42 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_097" 2011-Dec-09 05:51:42 LOG4 got_cormsg: From DATATAKING: set ra 105.64 2011-Dec-09 05:51:42 LOG4 got_cormsg: From DATATAKING: set dec 13.2843993497 2011-Dec-09 05:51:42 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-09 05:51:42 LOG4 got_cormsg: From DATATAKING: pnt tr 105.64 13.2843993497 -CF 2011-Dec-09 05:51:42 LOG4 got_cormsg: From DATATAKING: vw% 105.64 2011-Dec-09 05:51:42 LOG4 got_cormsg: From DATATAKING: vw% 13.2843993497 2011-Dec-09 05:51:42 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2011-Dec-09 05:51:42 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-09 05:51:42 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 05:53:10 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Dec-09 05:53:10 INFO3 alfa_motor: ALFA rotator in-position -83.60 degrees 2011-Dec-09 05:53:10 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Dec-09 05:53:10 LOG5 end_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2011-Dec-09 05:53:10 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-09 05:53:10 STOP finish_task: Finishing task 'rotate ALFA to -83.6 degrees' 2011-Dec-09 05:53:10 LOG5 finish_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2011-Dec-09 05:53:10 INFO2 finish_task: DONE finished configuration: rotating ALFA to -83.6 degrees 2011-Dec-09 05:53:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 05:53:10 STOP end_task: Finishing task 'rotate ALFA to -83.6 degrees' with status 'OK' 2011-Dec-09 05:53:10 LOG5 end_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2011-Dec-09 05:53:10 START begin_task: Starting task 'waiting on telescope' 2011-Dec-09 05:53:10 LOG5 begin_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2011-Dec-09 05:53:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-09 05:53:10 LOG3 waittrk: Start waittrk 5 2011-Dec-09 05:53:10 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-09 05:53:10 LOG5 begin_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2011-Dec-09 05:53:15 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-09 05:53:15 LOG5 end_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2011-Dec-09 05:53:15 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-09 05:53:15 LOG5 begin_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2011-Dec-09 05:54:46 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-09 05:54:46 LOG5 end_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2011-Dec-09 05:54:46 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-09 05:54:46 INFO2 waittrk: Now tracking AGES3193_p1_097 2011-Dec-09 05:54:46 LOG4 waittrk: Current telescope position: Az = 105.38 ZA = 13.29 2011-Dec-09 05:54:46 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-09 05:54:46 LOG5 finish_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2011-Dec-09 05:54:46 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-09 05:54:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 05:54:46 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-09 05:54:46 LOG5 end_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2011-Dec-09 05:54:46 START begin_task: Starting task 'selecting calibration type' 2011-Dec-09 05:54:46 LOG5 begin_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2011-Dec-09 05:54:46 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-09 05:54:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-09 05:54:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 05:54:46 START begin_task: Starting task 'waiting on setcal' 2011-Dec-09 05:54:46 LOG5 begin_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2011-Dec-09 05:54:46 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-09 05:54:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 05:54:47 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 05:54:47 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-09 05:54:47 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-09 05:54:47 LOG5 end_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2011-Dec-09 05:54:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-09 05:54:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-09 05:54:47 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-09 05:54:47 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-09 05:54:47 LOG5 begin_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2011-Dec-09 05:54:47 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 05:54:48 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-09 05:54:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-09 05:54:48 LOG5 end_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2011-Dec-09 05:54:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-09 05:54:48 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-09 05:54:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-09 05:54:48 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-09 05:54:48 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-09 05:54:48 LOG5 begin_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2011-Dec-09 05:54:48 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-09 05:54:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-09 05:54:48 LOG5 end_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2011-Dec-09 05:54:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-09 05:54:48 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-09 05:54:48 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-09 05:54:48 LOG5 end_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2011-Dec-09 05:54:48 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Dec-09 05:54:48 INFO2 astwait: Waiting for 522 seconds from 09:54:48 to 10:03:30 UTC ... 2011-Dec-09 05:54:48 LOG4 send_obs_status: To obs_status: <1> TASKTIME 522 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-09 05:54:48 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Dec-09 05:54:48 LOG5 begin_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2011-Dec-09 06:03:30 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Dec-09 06:03:30 LOG5 end_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2011-Dec-09 06:03:30 INFO3 astwait: Finished waiting 2011-Dec-09 06:03:30 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-09 06:03:30 LOG5 dopset_later: Calling 'dopset_later 60.8216039808811' 2011-Dec-09 06:03:30 INFO3 dopset_later: Setting Doppler correction for 06:04:30 (60.8 seconds from now) 2011-Dec-09 06:03:30 LOG5 antvel: Calling 'antvel 105.640000 13.284399 F Heliocentric 60.8216039808811' 2011-Dec-09 06:03:30 LOG2 antvel: Transforming current Az = 105.64 ZA = 13.28 to apparent RA = 09:53:41.4 Dec = +21:25:23.8 2011-Dec-09 06:03:30 LOG2 antvel: Parameters to Doppler: Heliocentric 36270 2011 343 0.0 2011-Dec-09 06:03:30 INFO5 antvel: Computed antenna velocity: -27.20195 km/s 2011-Dec-09 06:03:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-27.201948145199999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Dec-09 06:03:30 INFO4 dopset_gen: New sky frequencies: 1381.368768 1381.368768 1381.368768 1381.368768 1381.368768 1381.368768 1381.368768 1381.368768 1381.368768 2011-Dec-09 06:03:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.368768 sky0=1381.368768 sky1=1381.368768 sky2=1381.368768 sky3=1381.368768 sky4=1381.368768 sky5=1381.368768 sky6=1381.368768 sky7=1381.368768 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Dec-09 06:03:30 LOG2 dopset_gen: Result from 'sky2syn': 1631.368768 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Dec-09 06:03:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631368768.0} 2011-Dec-09 06:03:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 06:03:30 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Dec-09 06:03:30 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Dec-09 06:03:30 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.5 Dec = +21:28:46.9 2011-Dec-09 06:03:30 LOG3 track_source: Calling 'track_source AGES3193_p1_097 095203.5 212846.9 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-09 06:03:30 START begin_task: Starting task 'sending tracking commands' 2011-Dec-09 06:03:30 LOG5 begin_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2011-Dec-09 06:03:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_097} INFO {Slewing to source 'AGES3193_p1_097' ...} 2011-Dec-09 06:03:30 INFO1 track_source: Starting to track AGES3193_p1_097 2011-Dec-09 06:03:30 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_097" 2011-Dec-09 06:03:30 LOG3 vw_send: To DATATAKING: set ra 095203.5 2011-Dec-09 06:03:30 LOG3 vw_send: To DATATAKING: set dec 212846.9 2011-Dec-09 06:03:30 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-09 06:03:30 LOG3 vw_send: To DATATAKING: pnt tr 095203.5 212846.9 -CJ 2011-Dec-09 06:03:30 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-09 06:03:30 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-09 06:03:30 LOG5 finish_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2011-Dec-09 06:03:30 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-09 06:03:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 06:03:30 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-09 06:03:30 LOG5 end_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2011-Dec-09 06:03:30 START begin_task: Starting task 'waiting on telescope' 2011-Dec-09 06:03:30 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2011-Dec-09 06:03:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Dec-09 06:03:30 LOG3 waittrk: Start waittrk 5 2011-Dec-09 06:03:30 START begin_task: Starting task 'waiting on telescope movement' 2011-Dec-09 06:03:30 LOG5 begin_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2011-Dec-09 06:03:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631368768.0} 2011-Dec-09 06:03:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Dec-09 06:03:30 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-09 06:03:30 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_097" 2011-Dec-09 06:03:30 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 06:03:30 LOG4 got_cormsg: From DATATAKING: set ra 095203.5 2011-Dec-09 06:03:30 LOG4 got_cormsg: From DATATAKING: set dec 212846.9 2011-Dec-09 06:03:30 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-09 06:03:30 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.5 212846.9 -CJ 2011-Dec-09 06:03:30 LOG4 got_cormsg: From DATATAKING: 095203.5 2011-Dec-09 06:03:30 LOG4 got_cormsg: From DATATAKING: vw% 212846.9 2011-Dec-09 06:03:30 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2011-Dec-09 06:03:30 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-09 06:03:30 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 06:03:35 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Dec-09 06:03:35 LOG5 end_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2011-Dec-09 06:03:35 START begin_task: Starting task 'waiting on telescope on source' 2011-Dec-09 06:03:35 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2011-Dec-09 06:03:37 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Dec-09 06:03:37 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2011-Dec-09 06:03:37 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Dec-09 06:03:37 INFO2 waittrk: Now tracking AGES3193_p1_097 2011-Dec-09 06:03:37 LOG4 waittrk: Current telescope position: Az = 105.35 ZA = 13.31 2011-Dec-09 06:03:37 STOP finish_task: Finishing task 'waiting on telescope' 2011-Dec-09 06:03:37 LOG5 finish_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2011-Dec-09 06:03:37 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Dec-09 06:03:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 06:03:37 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Dec-09 06:03:37 LOG5 end_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2011-Dec-09 06:03:37 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Dec-09 06:03:37 LOG5 begin_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2011-Dec-09 06:03:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Dec-09 06:03:37 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Dec-09 06:03:37 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Dec-09 06:03:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Dec-09 06:03:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 06:03:37 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Dec-09 06:03:37 LOG5 begin_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2011-Dec-09 06:03:38 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Dec-09 06:03:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 06:03:38 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 06:03:38 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-09 06:03:38 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Dec-09 06:03:38 LOG5 end_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2011-Dec-09 06:03:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Dec-09 06:03:38 START begin_task: Starting task 'adjusting WAPP power' 2011-Dec-09 06:03:38 LOG5 begin_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2011-Dec-09 06:03:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-09 06:03:38 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-09 06:03:38 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-09 06:03:38 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-09 06:03:38 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Dec-09 06:03:38 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Dec-09 06:03:38 LOG5 begin_task: Level: (5) ID = <10293> Status = 0 0 0 0 ok 2011-Dec-09 06:03:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Dec-09 06:03:38 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 06:03:38 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 8 5 dB 2011-Dec-09 06:03:38 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 3 4 dB 2011-Dec-09 06:03:38 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 4 dB --- beam 3: 2 2 dB 2011-Dec-09 06:03:38 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2011-Dec-09 06:03:38 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Dec-09 06:03:38 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Dec-09 06:03:38 LOG5 end_task: Level: (5) ID = <10293> Status = 0 0 0 0 ok 2011-Dec-09 06:03:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.901 1.022 ALFA beam 1: 0.891 1.102 2011-Dec-09 06:03:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.098 0.960 ALFA beam 3: 1.013 1.092 2011-Dec-09 06:03:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.800 0.897 ALFA beam 5: 0.958 0.866 2011-Dec-09 06:03:38 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.081 0.014 ALFA beam 7: 0.941 0.014 2011-Dec-09 06:03:38 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Dec-09 06:03:38 LOG5 finish_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2011-Dec-09 06:03:38 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Dec-09 06:03:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 06:03:38 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Dec-09 06:03:38 LOG5 end_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2011-Dec-09 06:03:38 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Dec-09 06:03:38 LOG5 begin_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2011-Dec-09 06:03:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Dec-09 06:03:38 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Dec-09 06:03:38 LOG3 socket_wait: To MOCK: ADJP30 2011-Dec-09 06:03:38 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Dec-09 06:03:38 LOG5 begin_task: Level: (5) ID = <10295> Status = 0 0 0 0 ok 2011-Dec-09 06:03:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-09 06:03:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.901 1.022 0.891 1.102 2011-Dec-09 06:03:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.098 0.960 1.013 1.092 2011-Dec-09 06:03:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.800 0.897 0.958 0.866 2011-Dec-09 06:03:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 0.014 0.941 0.014 2011-Dec-09 06:03:44 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.9 28.0 B 29.6 29.7 mn:A 0.1 0.0 B -0.4 -0.4 gn: 11 11 2011-Dec-09 06:03:44 INFO3 from_mock: From MOCK: b0s1g0 rms:A 15.2 14.4 B 16.1 17.0 mn:A 0.3 -0.4 B -0.3 0.1 gn: 5 6 2011-Dec-09 06:03:44 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.3 28.4 B 32.0 28.1 mn:A 0.4 0.7 B 0.2 0.1 gn: 7 11 2011-Dec-09 06:03:44 INFO3 from_mock: From MOCK: b1s1g0 rms:A 17.9 16.4 B 24.3 24.3 mn:A -0.2 -0.2 B 0.6 0.2 gn: 3 8 2011-Dec-09 06:03:44 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.5 30.6 B 27.8 29.1 mn:A 0.0 -0.5 B 0.3 -0.0 gn: 11 11 2011-Dec-09 06:03:44 INFO3 from_mock: From MOCK: b2s1g0 rms:A 18.8 19.1 B 20.4 18.9 mn:A 0.4 -0.2 B 0.3 0.3 gn: 7 8 2011-Dec-09 06:03:44 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.7 31.5 B 30.8 27.4 mn:A 0.3 -0.3 B -0.1 -0.3 gn: 13 12 2011-Dec-09 06:03:44 INFO3 from_mock: From MOCK: b3s1g0 rms:A 15.6 15.1 B 20.7 21.6 mn:A -0.2 0.3 B 0.0 0.2 gn: 6 9 2011-Dec-09 06:03:44 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.7 28.8 B 28.3 28.4 mn:A -0.2 -0.3 B -0.5 -0.1 gn: 13 11 2011-Dec-09 06:03:44 INFO3 from_mock: From MOCK: b4s1g0 rms:A 14.6 13.1 B 17.3 16.7 mn:A -0.0 -0.0 B -0.3 0.1 gn: 9 8 2011-Dec-09 06:03:45 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.5 28.4 B 31.2 31.3 mn:A 0.5 0.4 B -0.1 0.6 gn: 12 11 2011-Dec-09 06:03:45 INFO3 from_mock: From MOCK: b5s1g0 rms:A 12.4 12.3 B 18.6 18.4 mn:A -0.3 0.5 B 0.2 0.4 gn: 4 6 2011-Dec-09 06:03:45 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.4 29.7 B 14.8 15.3 mn:A -0.3 0.2 B 0.5 -0.3 gn: 13 31 2011-Dec-09 06:03:45 INFO3 from_mock: From MOCK: b6s1g0 rms:A 15.6 14.2 B 11.8 11.4 mn:A 0.8 0.6 B 0.1 0.3 gn: 7 31 2011-Dec-09 06:03:45 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Dec-09 06:03:45 LOG5 end_task: Level: (5) ID = <10295> Status = 0 0 0 0 ok 2011-Dec-09 06:03:45 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Dec-09 06:03:45 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Dec-09 06:03:45 LOG5 finish_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2011-Dec-09 06:03:45 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Dec-09 06:03:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 06:03:45 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Dec-09 06:03:45 LOG5 end_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2011-Dec-09 06:03:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-09 06:03:45 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Dec-09 06:03:45 LOG5 finish_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2011-Dec-09 06:03:45 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Dec-09 06:03:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 06:03:45 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Dec-09 06:03:45 LOG5 end_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2011-Dec-09 06:03:45 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 CF 2011-Dec-09 06:03:45 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 CF 2011-Dec-09 06:03:45 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 CF 2011-Dec-09 06:03:45 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 CF 2011-Dec-09 06:03:45 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Dec-09 06:03:45 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Dec-09 06:03:45 LOG5 begin_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2011-Dec-09 06:03:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Dec-09 06:03:45 START begin_task: Starting task 'selecting calibration type' 2011-Dec-09 06:03:45 LOG5 begin_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2011-Dec-09 06:03:45 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Dec-09 06:03:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Dec-09 06:03:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 06:03:45 START begin_task: Starting task 'waiting on setcal' 2011-Dec-09 06:03:45 LOG5 begin_task: Level: (5) ID = <10298> Status = 0 0 0 0 ok 2011-Dec-09 06:03:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 CF' 2011-Dec-09 06:03:45 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Dec-09 06:03:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Dec-09 06:03:45 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 06:03:45 LOG4 got_cormsg: From DATATAKING: DONE 2011-Dec-09 06:03:45 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Dec-09 06:03:45 LOG5 end_task: Level: (5) ID = <10298> Status = 0 0 0 0 ok 2011-Dec-09 06:03:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Dec-09 06:03:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-09 06:03:45 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Dec-09 06:03:45 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-09 06:03:45 LOG5 begin_task: Level: (5) ID = <10299> Status = 0 0 0 0 ok 2011-Dec-09 06:03:45 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 06:03:45 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-09 06:03:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-09 06:03:45 LOG5 end_task: Level: (5) ID = <10299> Status = 0 0 0 0 ok 2011-Dec-09 06:03:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-09 06:03:45 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Dec-09 06:03:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Dec-09 06:03:45 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Dec-09 06:03:45 START begin_task: Starting task 'waiting on command to ALFA' 2011-Dec-09 06:03:45 LOG5 begin_task: Level: (5) ID = <10300> Status = 0 0 0 0 ok 2011-Dec-09 06:03:45 LOG4 got_alfamon: From ALFAMON: ACK 2011-Dec-09 06:03:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Dec-09 06:03:45 LOG5 end_task: Level: (5) ID = <10300> Status = 0 0 0 0 ok 2011-Dec-09 06:03:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Dec-09 06:03:45 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Dec-09 06:03:45 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Dec-09 06:03:45 LOG5 end_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2011-Dec-09 06:03:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Dec-09 06:03:45 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Dec-09 06:03:45 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Dec-09 06:03:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-09 06:03:46 LOG5 begin_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2011-Dec-09 06:03:46 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-09 06:03:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Dec-09 06:03:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-09 06:03:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-09 06:03:46 LOG5 end_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2011-Dec-09 06:03:46 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Dec-09 06:03:46 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-09 06:03:46 LOG5 begin_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2011-Dec-09 06:03:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Dec-09 06:03:46 LOG5 log_alfabeam: Parameters: 9.8676388888888891 21.479694444444441 10.799109 2011.9397744125026 -83.600014 2011-Dec-09 06:03:46 LOG4 log_alfabeam: ALFABEAM 0 9.867638888888891 21.479694444444437 2011-Dec-09 06:03:46 LOG4 log_alfabeam: ALFABEAM 1 9.865783456019386 21.570199907493471 2011-Dec-09 06:03:46 LOG4 log_alfabeam: ALFABEAM 2 9.860317265709508 21.509682708229985 2011-Dec-09 06:03:46 LOG4 log_alfabeam: ALFABEAM 3 9.862205219588080 21.418949030911573 2011-Dec-09 06:03:46 LOG4 log_alfabeam: ALFABEAM 4 9.869535445438249 21.389604474986044 2011-Dec-09 06:03:46 LOG4 log_alfabeam: ALFABEAM 5 9.874960181909136 21.449789239717564 2011-Dec-09 06:03:46 LOG4 log_alfabeam: ALFABEAM 6 9.873095874833950 21.539651600949163 2011-Dec-09 06:03:46 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-09 06:03:46 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-09 06:03:46 LOG3 take_mock_data: PSET configuration: obsnm=CF 2011-Dec-09 06:03:46 LOG3 take_mock_data: PSET configuration: object=AGES3193_p1_097 2011-Dec-09 06:03:46 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-09 06:03:46 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-09 06:03:46 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-09 06:03:46 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-09 06:03:46 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-09 06:03:46 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-09 06:03:46 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-09 06:03:46 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Dec-09 06:03:46 LOG3 take_mock_data: PSET configuration: patternid=134300231 2011-Dec-09 06:03:46 LOG3 take_mock_data: PSET configuration: scanid=134300232 2011-Dec-09 06:03:46 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-09 06:03:46 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-09 06:03:46 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-09 06:03:46 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456368768.0 2011-Dec-09 06:03:46 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306368768.0 2011-Dec-09 06:03:46 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-09 06:03:46 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-09 06:03:46 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=CF:object=AGES3193_p1_097:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=134300231:scanid=134300232:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456368768.0:topobfreqhz=1306368768.0:filetype=1 2011-Dec-09 06:03:46 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-09 06:03:46 LOG5 begin_task: Level: (5) ID = <10303> Status = 0 0 0 0 ok 2011-Dec-09 06:03:46 LOG4 from_mock: From MOCK: psetok 2011-Dec-09 06:03:46 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-09 06:03:46 LOG5 end_task: Level: (5) ID = <10303> Status = 0 0 0 0 ok 2011-Dec-09 06:03:46 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-09 06:03:46 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-09 06:03:46 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-09 06:03:46 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-09 06:03:46 LOG5 begin_task: Level: (5) ID = <10304> Status = 0 0 0 0 ok 2011-Dec-09 06:03:46 NOTE WAPPDATA-new_file: New FITS file: wapp.20111209.a2048.0005.fits 2011-Dec-09 06:03:46 LOG4 from_mock: From MOCK: starok 2011-Dec-09 06:03:46 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-09 06:03:46 LOG5 end_task: Level: (5) ID = <10304> Status = 0 0 0 0 ok 2011-Dec-09 06:03:46 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-09 06:03:46 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134300232 2011-Dec-09 06:03:46 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-09 06:03:46 LOG5 begin_task: Level: (5) ID = <10305> Status = 0 0 0 0 ok 2011-Dec-09 06:03:46 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20111209.a2048.0005.fits} 2011-Dec-09 06:03:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 06:03:46 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-09 06:03:46 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-09 06:03:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Dec-09 06:03:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36227.00 2011-Dec-09 06:03:48 INFO2 got_mock_message: Mock spectrometer start file number is 01200 2011-Dec-09 06:03:48 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-09 06:03:48 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-09 06:03:48 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-09 06:03:48 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-09 06:03:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-09 06:03:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-09 06:03:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-09 06:03:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-09 06:03:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-09 06:03:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-09 06:03:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-09 06:03:48 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-09 06:03:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 06:03:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 06:03:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 06:03:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 06:03:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 06:03:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 06:03:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 06:03:51 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 06:03:51.01 2011-Dec-09 06:03:51 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323425031.01 Fri Dec 9 06:03:51 2011 2011-Dec-09 06:03:51 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-09 06:03:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.368768 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 06:03:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.368768 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 06:03:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.368768 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 06:03:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.368768 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 06:03:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.368768 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 06:03:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.368768 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 06:03:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.368768 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 06:03:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.368768 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 06:03:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.368768 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 06:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.514 (still bad) 2011-Dec-09 06:03:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 06:03:57 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-09 06:03:57 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-09 06:03:57 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-09 06:03:57 LOG5 end_task: Level: (5) ID = <10305> Status = 0 0 0 0 ok 2011-Dec-09 06:03:57 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-09 06:03:57 LOG5 end_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2011-Dec-09 06:03:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Dec-09 06:03:57 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Dec-09 06:03:57 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Dec-09 06:03:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Dec-09 06:03:57 LOG5 begin_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2011-Dec-09 06:03:57 LOG3 CALCONTROL-caltrig: Software trigger 2011-Dec-09 06:03:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Dec-09 06:03:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Dec-09 06:03:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Dec-09 06:03:57 LOG5 end_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2011-Dec-09 06:03:57 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Dec-09 06:03:57 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-09 06:03:57 LOG5 begin_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2011-Dec-09 06:03:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Dec-09 06:03:57 LOG5 log_alfabeam: Parameters: 9.8676388888888891 21.479694444444441 10.802173 2011.9397747610717 -83.600014 2011-Dec-09 06:03:57 LOG4 log_alfabeam: ALFABEAM 0 9.867638888888891 21.479694444444444 2011-Dec-09 06:03:57 LOG4 log_alfabeam: ALFABEAM 1 9.865777641796120 21.570176262433112 2011-Dec-09 06:03:57 LOG4 log_alfabeam: ALFABEAM 2 9.860315364067990 21.509591967731808 2011-Dec-09 06:03:57 LOG4 log_alfabeam: ALFABEAM 3 9.862209043021670 21.418883126025914 2011-Dec-09 06:03:57 LOG4 log_alfabeam: ALFABEAM 4 9.869541085020550 21.389627257326005 2011-Dec-09 06:03:57 LOG4 log_alfabeam: ALFABEAM 5 9.874962073350325 21.449879471746979 2011-Dec-09 06:03:57 LOG4 log_alfabeam: ALFABEAM 6 9.873092039314907 21.539720232272764 2011-Dec-09 06:03:57 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-09 06:03:57 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-09 06:03:57 LOG3 take_mock_data: PSET configuration: obsnm=CF 2011-Dec-09 06:03:57 LOG3 take_mock_data: PSET configuration: object=AGES3193_p1_097 2011-Dec-09 06:03:57 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-09 06:03:57 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-09 06:03:57 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-09 06:03:57 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-09 06:03:57 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-09 06:03:57 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-09 06:03:57 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Dec-09 06:03:57 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Dec-09 06:03:57 LOG3 take_mock_data: PSET configuration: patternid=134300231 2011-Dec-09 06:03:57 LOG3 take_mock_data: PSET configuration: scanid=134300233 2011-Dec-09 06:03:57 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-09 06:03:57 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-09 06:03:57 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-09 06:03:57 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456368768.0 2011-Dec-09 06:03:57 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306368768.0 2011-Dec-09 06:03:57 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-09 06:03:57 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-09 06:03:57 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=CF:object=AGES3193_p1_097:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=134300231:scanid=134300233:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456368768.0:topobfreqhz=1306368768.0:filetype=1 2011-Dec-09 06:03:57 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-09 06:03:57 LOG5 begin_task: Level: (5) ID = <10308> Status = 0 0 0 0 ok 2011-Dec-09 06:03:57 LOG4 from_mock: From MOCK: psetok 2011-Dec-09 06:03:57 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-09 06:03:57 LOG5 end_task: Level: (5) ID = <10308> Status = 0 0 0 0 ok 2011-Dec-09 06:03:57 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-09 06:03:57 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-09 06:03:57 LOG3 socket_wait: To MOCK: STAR5 2011-Dec-09 06:03:57 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-09 06:03:57 LOG5 begin_task: Level: (5) ID = <10309> Status = 0 0 0 0 ok 2011-Dec-09 06:03:57 LOG4 from_mock: From MOCK: starok 2011-Dec-09 06:03:57 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-09 06:03:57 LOG5 end_task: Level: (5) ID = <10309> Status = 0 0 0 0 ok 2011-Dec-09 06:03:57 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-09 06:03:57 INFO2 take_data: Starting WAPP+Mock 5-second scan: 134300233 2011-Dec-09 06:03:57 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-09 06:03:57 LOG5 begin_task: Level: (5) ID = <10310> Status = 0 0 0 0 ok 2011-Dec-09 06:03:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 06:03:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Dec-09 06:03:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36238.00 2011-Dec-09 06:03:58 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-09 06:03:58 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-09 06:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.518 (still bad) 2011-Dec-09 06:04:00 INFO2 got_mock_message: Mock spectrometer start file number is 01300 2011-Dec-09 06:04:00 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-09 06:04:00 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Dec-09 06:04:00 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Dec-09 06:04:00 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-09 06:04:00 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-09 06:04:00 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-09 06:04:00 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-09 06:04:00 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-09 06:04:00 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-09 06:04:00 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-09 06:04:00 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-09 06:04:00 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-09 06:04:00 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 06:04:00 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 06:04:00 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 06:04:00 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 06:04:00 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 06:04:00 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 06:04:00 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2011-Dec-09 06:04:03 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 06:04:03.02 2011-Dec-09 06:04:03 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323425043.02 Fri Dec 9 06:04:03 2011 2011-Dec-09 06:04:03 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-09 06:04:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.368768 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 06:04:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.368768 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 06:04:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.368768 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 06:04:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.368768 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 06:04:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.368768 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 06:04:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.368768 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 06:04:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.368768 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 06:04:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.368768 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 06:04:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.368768 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 06:04:03 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Dec-09 06:04:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 06:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-09 06:04:08 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-09 06:04:09 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-09 06:04:09 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-09 06:04:09 LOG5 end_task: Level: (5) ID = <10310> Status = 0 0 0 0 ok 2011-Dec-09 06:04:09 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-09 06:04:09 LOG5 end_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2011-Dec-09 06:04:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Dec-09 06:04:09 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Dec-09 06:04:09 LOG5 finish_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2011-Dec-09 06:04:09 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Dec-09 06:04:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 06:04:09 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Dec-09 06:04:09 LOG5 end_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2011-Dec-09 06:04:09 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Dec-09 06:04:09 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 105.64 and ZA = 13.28 2011-Dec-09 06:04:09 LOG3 track_source: Calling 'track_source AGES3193_p1_097 105.64 13.2843993497 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Dec-09 06:04:09 START begin_task: Starting task 'sending tracking commands' 2011-Dec-09 06:04:09 LOG5 begin_task: Level: (3) ID = <10311> Status = 0 0 0 0 ok 2011-Dec-09 06:04:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p1_097} INFO {Slewing to source 'AGES3193_p1_097' ...} 2011-Dec-09 06:04:09 INFO1 track_source: Starting to track AGES3193_p1_097 2011-Dec-09 06:04:09 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p1_097" 2011-Dec-09 06:04:09 LOG3 vw_send: To DATATAKING: set ra 105.64 2011-Dec-09 06:04:09 LOG3 vw_send: To DATATAKING: set dec 13.2843993497 2011-Dec-09 06:04:09 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Dec-09 06:04:09 LOG3 vw_send: To DATATAKING: pnt tr 105.64 13.2843993497 -CF 2011-Dec-09 06:04:09 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Dec-09 06:04:09 STOP finish_task: Finishing task 'sending tracking commands' 2011-Dec-09 06:04:09 LOG5 finish_task: Level: (3) ID = <10311> Status = 0 0 0 0 ok 2011-Dec-09 06:04:09 INFO2 finish_task: DONE finished sending: tracking commands 2011-Dec-09 06:04:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Dec-09 06:04:09 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Dec-09 06:04:09 LOG5 end_task: Level: (3) ID = <10311> Status = 0 0 0 0 ok 2011-Dec-09 06:04:09 LOG1 fixed_driftmap: Parameters: HA = +00:55:00.2 Start = 10:48:41.7 LST = 10:48:19.9 diff = 21.9 secs 2011-Dec-09 06:04:09 INFO2 fixed_driftmap: Waiting 19.9 seconds for RA 9:53:42 2011-Dec-09 06:04:09 INFO2 lstwait: Waiting for 19.8 secs from LST 10:48:20 to LST 10:48:40 ... 2011-Dec-09 06:04:09 LOG4 send_obs_status: To obs_status: <1> TASKTIME 19.827041987598957 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Dec-09 06:04:09 START begin_task: Starting task 'waiting on wait on LST' 2011-Dec-09 06:04:09 LOG5 begin_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2011-Dec-09 06:04:09 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p1_097" 2011-Dec-09 06:04:09 LOG4 got_cormsg: From DATATAKING: set ra 105.64 2011-Dec-09 06:04:09 LOG4 got_cormsg: From DATATAKING: set dec 13.2843993497 2011-Dec-09 06:04:09 LOG4 got_cormsg: From DATATAKING: vw% 105.64 2011-Dec-09 06:04:09 LOG4 got_cormsg: From DATATAKING: vw% 13.2843993497 2011-Dec-09 06:04:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 06:04:09 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Dec-09 06:04:09 LOG4 got_cormsg: From DATATAKING: pnt tr 105.64 13.2843993497 -CF 2011-Dec-09 06:04:09 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Dec-09 06:04:09 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Dec-09 06:04:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 06:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-09 06:04:29 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Dec-09 06:04:29 LOG5 end_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2011-Dec-09 06:04:29 LOG4 lstwait: Finished waiting 1.18 seconds late 2011-Dec-09 06:04:29 INFO3 lstwait: Finished waiting 2011-Dec-09 06:04:29 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Dec-09 06:04:29 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Dec-09 06:04:29 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Dec-09 06:04:29 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Dec-09 06:04:29 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Dec-09 06:04:29 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Dec-09 06:04:29 LOG5 begin_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2011-Dec-09 06:04:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Dec-09 06:04:29 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Dec-09 06:04:29 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Dec-09 06:04:29 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Dec-09 06:04:29 LOG3 take_mock_data: PSET configuration: obsnm=CF 2011-Dec-09 06:04:29 LOG3 take_mock_data: PSET configuration: object=AGES3193_p1_097 2011-Dec-09 06:04:29 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Dec-09 06:04:29 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Dec-09 06:04:29 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Dec-09 06:04:29 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Dec-09 06:04:29 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Dec-09 06:04:29 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Dec-09 06:04:29 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Dec-09 06:04:29 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Dec-09 06:04:29 LOG3 take_mock_data: PSET configuration: patternid=134300234 2011-Dec-09 06:04:29 LOG3 take_mock_data: PSET configuration: scanid=134300234 2011-Dec-09 06:04:29 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Dec-09 06:04:29 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Dec-09 06:04:29 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Dec-09 06:04:29 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456368768.0 2011-Dec-09 06:04:29 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306368768.0 2011-Dec-09 06:04:29 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Dec-09 06:04:29 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Dec-09 06:04:29 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=CF:object=AGES3193_p1_097:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=134300234:scanid=134300234:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456368768.0:topobfreqhz=1306368768.0:filetype=1 2011-Dec-09 06:04:29 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Dec-09 06:04:29 LOG5 begin_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2011-Dec-09 06:04:29 LOG4 from_mock: From MOCK: psetok 2011-Dec-09 06:04:29 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Dec-09 06:04:29 LOG5 end_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2011-Dec-09 06:04:29 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Dec-09 06:04:29 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Dec-09 06:04:29 LOG3 socket_wait: To MOCK: STAR1200 2011-Dec-09 06:04:29 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Dec-09 06:04:29 LOG5 begin_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2011-Dec-09 06:04:29 LOG4 from_mock: From MOCK: starok 2011-Dec-09 06:04:29 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Dec-09 06:04:29 LOG5 end_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2011-Dec-09 06:04:29 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Dec-09 06:04:29 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 134300234 2011-Dec-09 06:04:30 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Dec-09 06:04:30 LOG5 begin_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2011-Dec-09 06:04:30 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Dec-09 06:04:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Dec-09 06:04:30 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Dec-09 06:04:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Dec-09 06:04:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36271.00 2011-Dec-09 06:04:31 INFO2 got_mock_message: Mock spectrometer start file number is 01400 2011-Dec-09 06:04:31 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Dec-09 06:04:31 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1199.9 s 2011-Dec-09 06:04:31 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Dec-09 06:04:31 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Dec-09 06:04:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Dec-09 06:04:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Dec-09 06:04:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Dec-09 06:04:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Dec-09 06:04:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2011-Dec-09 06:04:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Dec-09 06:04:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Dec-09 06:04:31 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Dec-09 06:04:31 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 06:04:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 06:04:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 06:04:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 06:04:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 06:04:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 06:04:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2011-Dec-09 06:04:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.368768 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Dec-09 06:04:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.368768 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 06:04:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.368768 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2011-Dec-09 06:04:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.368768 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 06:04:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.368768 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 06:04:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.368768 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 06:04:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.368768 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2011-Dec-09 06:04:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.368768 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2011-Dec-09 06:04:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.368768 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2011-Dec-09 06:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2011-Dec-09 06:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-09 06:04:35 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 06:04:35.01 2011-Dec-09 06:04:35 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1323425075.01 Fri Dec 9 06:04:35 2011 2011-Dec-09 06:04:35 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Dec-09 06:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2011-Dec-09 06:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-09 06:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2011-Dec-09 06:04:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2011-Dec-09 06:04:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 1.022 0.896 1.103 2011-Dec-09 06:04:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.103 0.960 1.014 1.092 2011-Dec-09 06:04:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.800 0.899 0.963 0.882 2011-Dec-09 06:04:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 0.014 0.942 0.014 2011-Dec-09 06:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2011-Dec-09 06:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2011-Dec-09 06:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2011-Dec-09 06:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2011-Dec-09 06:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.099 (still bad) 2011-Dec-09 06:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2011-Dec-09 06:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2011-Dec-09 06:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 06:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2011-Dec-09 06:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2011-Dec-09 06:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2011-Dec-09 06:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2011-Dec-09 06:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2011-Dec-09 06:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2011-Dec-09 06:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2011-Dec-09 06:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2011-Dec-09 06:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2011-Dec-09 06:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2011-Dec-09 06:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2011-Dec-09 06:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2011-Dec-09 06:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2011-Dec-09 06:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2011-Dec-09 06:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2011-Dec-09 06:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2011-Dec-09 06:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2011-Dec-09 06:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2011-Dec-09 06:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2011-Dec-09 06:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2011-Dec-09 06:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2011-Dec-09 06:05:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-09 06:05:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.910 1.025 0.897 1.103 2011-Dec-09 06:05:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.101 0.959 1.014 1.094 2011-Dec-09 06:05:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.823 0.939 0.959 0.881 2011-Dec-09 06:05:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 0.025 0.943 0.025 2011-Dec-09 06:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.103 (still bad) 2011-Dec-09 06:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.102 (still bad) 2011-Dec-09 06:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.104 (still bad) 2011-Dec-09 06:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2011-Dec-09 06:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2011-Dec-09 06:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.128 (still bad) 2011-Dec-09 06:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2011-Dec-09 06:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2011-Dec-09 06:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2011-Dec-09 06:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2011-Dec-09 06:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2011-Dec-09 06:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2011-Dec-09 06:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2011-Dec-09 06:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2011-Dec-09 06:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.130 (still bad) 2011-Dec-09 06:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2011-Dec-09 06:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2011-Dec-09 06:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2011-Dec-09 06:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.113 (still bad) 2011-Dec-09 06:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2011-Dec-09 06:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.105 (still bad) 2011-Dec-09 06:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2011-Dec-09 06:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.100 (still bad) 2011-Dec-09 06:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2011-Dec-09 06:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2011-Dec-09 06:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2011-Dec-09 06:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2011-Dec-09 06:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2011-Dec-09 06:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2011-Dec-09 06:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2011-Dec-09 06:06:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-09 06:06:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 1.020 0.894 1.098 2011-Dec-09 06:06:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.102 0.959 1.010 1.091 2011-Dec-09 06:06:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.799 0.894 0.960 0.879 2011-Dec-09 06:06:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.084 0.027 0.943 0.028 2011-Dec-09 06:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2011-Dec-09 06:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2011-Dec-09 06:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2011-Dec-09 06:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 06:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2011-Dec-09 06:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2011-Dec-09 06:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2011-Dec-09 06:07:01 WARNING WAPPDATA-search_pnt: WARNING extrapolating pnt-data from 55904.421516 to 55904.421528! 2011-Dec-09 06:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2011-Dec-09 06:07:02 WARNING WAPPDATA-search_pnt: WARNING interpolating pnt-data over 2.00 second time gap (55904.421516 - 55904.421539)! 2011-Dec-09 06:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.098 (still bad) 2011-Dec-09 06:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.097 (still bad) 2011-Dec-09 06:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2011-Dec-09 06:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2011-Dec-09 06:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2011-Dec-09 06:07:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.098 (still bad) 2011-Dec-09 06:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.097 (still bad) 2011-Dec-09 06:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.098 (still bad) 2011-Dec-09 06:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.098 (still bad) 2011-Dec-09 06:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.098 (still bad) 2011-Dec-09 06:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2011-Dec-09 06:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2011-Dec-09 06:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.098 (still bad) 2011-Dec-09 06:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2011-Dec-09 06:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2011-Dec-09 06:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2011-Dec-09 06:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2011-Dec-09 06:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.102 (still bad) 2011-Dec-09 06:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2011-Dec-09 06:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2011-Dec-09 06:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2011-Dec-09 06:07:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-09 06:07:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.902 1.015 0.891 1.099 2011-Dec-09 06:07:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.100 0.957 1.009 1.088 2011-Dec-09 06:07:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.798 0.894 0.960 0.878 2011-Dec-09 06:07:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 0.025 0.942 0.025 2011-Dec-09 06:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2011-Dec-09 06:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2011-Dec-09 06:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.099 (still bad) 2011-Dec-09 06:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.099 (still bad) 2011-Dec-09 06:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.105 (still bad) 2011-Dec-09 06:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.100 (still bad) 2011-Dec-09 06:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2011-Dec-09 06:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.102 (still bad) 2011-Dec-09 06:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.100 (still bad) 2011-Dec-09 06:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.102 (still bad) 2011-Dec-09 06:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2011-Dec-09 06:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2011-Dec-09 06:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2011-Dec-09 06:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2011-Dec-09 06:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2011-Dec-09 06:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2011-Dec-09 06:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2011-Dec-09 06:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2011-Dec-09 06:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.098 (still bad) 2011-Dec-09 06:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2011-Dec-09 06:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2011-Dec-09 06:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2011-Dec-09 06:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.104 (still bad) 2011-Dec-09 06:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.097 (still bad) 2011-Dec-09 06:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.098 (still bad) 2011-Dec-09 06:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.100 (still bad) 2011-Dec-09 06:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.098 (still bad) 2011-Dec-09 06:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.099 (still bad) 2011-Dec-09 06:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2011-Dec-09 06:08:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-09 06:08:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.900 1.016 0.893 1.096 2011-Dec-09 06:08:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.096 0.954 1.006 1.086 2011-Dec-09 06:08:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.795 0.891 0.957 0.877 2011-Dec-09 06:08:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.026 0.940 0.026 2011-Dec-09 06:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2011-Dec-09 06:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2011-Dec-09 06:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2011-Dec-09 06:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2011-Dec-09 06:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.105 (still bad) 2011-Dec-09 06:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.099 (still bad) 2011-Dec-09 06:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-09 06:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.100 (still bad) 2011-Dec-09 06:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.101 (still bad) 2011-Dec-09 06:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.103 (still bad) 2011-Dec-09 06:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2011-Dec-09 06:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.104 (still bad) 2011-Dec-09 06:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2011-Dec-09 06:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2011-Dec-09 06:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.104 (still bad) 2011-Dec-09 06:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2011-Dec-09 06:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2011-Dec-09 06:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2011-Dec-09 06:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2011-Dec-09 06:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2011-Dec-09 06:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2011-Dec-09 06:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2011-Dec-09 06:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 06:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2011-Dec-09 06:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2011-Dec-09 06:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2011-Dec-09 06:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2011-Dec-09 06:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2011-Dec-09 06:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2011-Dec-09 06:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2011-Dec-09 06:09:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-09 06:09:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.898 1.012 0.894 1.097 2011-Dec-09 06:09:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.102 0.957 1.006 1.087 2011-Dec-09 06:09:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.795 0.891 0.958 0.878 2011-Dec-09 06:09:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.026 0.940 0.026 2011-Dec-09 06:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2011-Dec-09 06:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2011-Dec-09 06:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2011-Dec-09 06:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2011-Dec-09 06:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.099 (still bad) 2011-Dec-09 06:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2011-Dec-09 06:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.100 (still bad) 2011-Dec-09 06:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.099 (still bad) 2011-Dec-09 06:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2011-Dec-09 06:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2011-Dec-09 06:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2011-Dec-09 06:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2011-Dec-09 06:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2011-Dec-09 06:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2011-Dec-09 06:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2011-Dec-09 06:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.102 (still bad) 2011-Dec-09 06:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2011-Dec-09 06:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2011-Dec-09 06:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2011-Dec-09 06:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2011-Dec-09 06:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 06:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 06:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2011-Dec-09 06:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2011-Dec-09 06:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2011-Dec-09 06:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 06:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2011-Dec-09 06:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.102 (still bad) 2011-Dec-09 06:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2011-Dec-09 06:10:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-09 06:10:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.900 1.016 0.893 1.096 2011-Dec-09 06:10:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.099 0.956 1.005 1.086 2011-Dec-09 06:10:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.801 0.900 0.957 0.877 2011-Dec-09 06:10:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.024 0.942 0.025 2011-Dec-09 06:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2011-Dec-09 06:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2011-Dec-09 06:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2011-Dec-09 06:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2011-Dec-09 06:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2011-Dec-09 06:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2011-Dec-09 06:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 06:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 06:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2011-Dec-09 06:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.102 (still bad) 2011-Dec-09 06:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2011-Dec-09 06:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2011-Dec-09 06:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.098 (still bad) 2011-Dec-09 06:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2011-Dec-09 06:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2011-Dec-09 06:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2011-Dec-09 06:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2011-Dec-09 06:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2011-Dec-09 06:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2011-Dec-09 06:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2011-Dec-09 06:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2011-Dec-09 06:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 06:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 06:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2011-Dec-09 06:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 06:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2011-Dec-09 06:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.104 (still bad) 2011-Dec-09 06:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.100 (still bad) 2011-Dec-09 06:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2011-Dec-09 06:11:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2011-Dec-09 06:11:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.902 1.014 0.893 1.099 2011-Dec-09 06:11:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.103 0.957 1.008 1.089 2011-Dec-09 06:11:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.797 0.891 0.960 0.883 2011-Dec-09 06:11:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 0.022 0.942 0.023 2011-Dec-09 06:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2011-Dec-09 06:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2011-Dec-09 06:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2011-Dec-09 06:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 06:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 06:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2011-Dec-09 06:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 06:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 06:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.104 (still bad) 2011-Dec-09 06:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.096 (still bad) 2011-Dec-09 06:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.098 (still bad) 2011-Dec-09 06:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.099 (still bad) 2011-Dec-09 06:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.093 (still bad) 2011-Dec-09 06:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.097 (still bad) 2011-Dec-09 06:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2011-Dec-09 06:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 06:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 06:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 06:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 06:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 06:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.103 (still bad) 2011-Dec-09 06:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.099 (still bad) 2011-Dec-09 06:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.096 (still bad) 2011-Dec-09 06:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.096 (still bad) 2011-Dec-09 06:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.096 (still bad) 2011-Dec-09 06:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2011-Dec-09 06:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2011-Dec-09 06:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2011-Dec-09 06:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2011-Dec-09 06:12:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-09 06:12:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 1.014 0.895 1.095 2011-Dec-09 06:12:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.101 0.957 1.012 1.092 2011-Dec-09 06:12:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.797 0.892 0.958 0.879 2011-Dec-09 06:12:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 0.026 0.942 0.026 2011-Dec-09 06:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2011-Dec-09 06:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2011-Dec-09 06:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2011-Dec-09 06:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2011-Dec-09 06:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 06:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 06:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 06:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2011-Dec-09 06:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2011-Dec-09 06:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2011-Dec-09 06:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2011-Dec-09 06:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2011-Dec-09 06:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2011-Dec-09 06:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2011-Dec-09 06:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2011-Dec-09 06:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2011-Dec-09 06:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 06:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2011-Dec-09 06:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 06:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 06:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2011-Dec-09 06:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2011-Dec-09 06:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2011-Dec-09 06:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2011-Dec-09 06:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2011-Dec-09 06:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2011-Dec-09 06:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2011-Dec-09 06:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 06:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2011-Dec-09 06:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2011-Dec-09 06:13:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-09 06:13:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.900 1.011 0.892 1.095 2011-Dec-09 06:13:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.095 0.953 1.004 1.085 2011-Dec-09 06:13:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.795 0.889 0.952 0.877 2011-Dec-09 06:13:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.027 0.940 0.028 2011-Dec-09 06:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 06:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.105 (still bad) 2011-Dec-09 06:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.097 (still bad) 2011-Dec-09 06:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.095 (still bad) 2011-Dec-09 06:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.098 (still bad) 2011-Dec-09 06:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.098 (still bad) 2011-Dec-09 06:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.098 (still bad) 2011-Dec-09 06:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2011-Dec-09 06:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 06:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 06:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 06:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 06:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 06:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 06:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 06:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 06:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2011-Dec-09 06:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 06:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2011-Dec-09 06:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2011-Dec-09 06:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2011-Dec-09 06:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2011-Dec-09 06:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2011-Dec-09 06:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2011-Dec-09 06:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2011-Dec-09 06:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2011-Dec-09 06:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2011-Dec-09 06:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2011-Dec-09 06:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2011-Dec-09 06:14:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-09 06:14:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.902 1.012 0.894 1.095 2011-Dec-09 06:14:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.094 0.952 1.004 1.086 2011-Dec-09 06:14:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.796 0.890 0.955 0.876 2011-Dec-09 06:14:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.026 0.938 0.026 2011-Dec-09 06:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2011-Dec-09 06:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.095 (still bad) 2011-Dec-09 06:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.094 (still bad) 2011-Dec-09 06:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.098 (still bad) 2011-Dec-09 06:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.095 (still bad) 2011-Dec-09 06:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.096 (still bad) 2011-Dec-09 06:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2011-Dec-09 06:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 06:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 06:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2011-Dec-09 06:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2011-Dec-09 06:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 06:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2011-Dec-09 06:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2011-Dec-09 06:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.094 (still bad) 2011-Dec-09 06:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2011-Dec-09 06:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2011-Dec-09 06:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2011-Dec-09 06:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2011-Dec-09 06:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2011-Dec-09 06:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2011-Dec-09 06:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2011-Dec-09 06:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2011-Dec-09 06:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2011-Dec-09 06:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2011-Dec-09 06:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.096 (still bad) 2011-Dec-09 06:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.095 (still bad) 2011-Dec-09 06:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.093 (still bad) 2011-Dec-09 06:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.094 (still bad) 2011-Dec-09 06:15:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-09 06:15:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.901 1.012 0.892 1.093 2011-Dec-09 06:15:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.095 0.953 1.002 1.086 2011-Dec-09 06:15:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.793 0.889 0.955 0.876 2011-Dec-09 06:15:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 0.025 0.939 0.025 2011-Dec-09 06:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.096 (still bad) 2011-Dec-09 06:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.096 (still bad) 2011-Dec-09 06:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.094 (still bad) 2011-Dec-09 06:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.096 (still bad) 2011-Dec-09 06:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.094 (still bad) 2011-Dec-09 06:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.096 (still bad) 2011-Dec-09 06:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.098 (still bad) 2011-Dec-09 06:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.095 (still bad) 2011-Dec-09 06:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.095 (still bad) 2011-Dec-09 06:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.097 (still bad) 2011-Dec-09 06:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.094 (still bad) 2011-Dec-09 06:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.095 (still bad) 2011-Dec-09 06:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-09 06:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.094 (still bad) 2011-Dec-09 06:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-09 06:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.094 (still bad) 2011-Dec-09 06:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.095 (still bad) 2011-Dec-09 06:16:31 WARNING WAPPDATA-search_pnt: WARNING extrapolating pnt-data from 55904.428113 to 55904.428125! 2011-Dec-09 06:16:32 WARNING WAPPDATA-search_pnt: WARNING interpolating pnt-data over 2.00 second time gap (55904.428113 - 55904.428137)! 2011-Dec-09 06:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.093 (still bad) 2011-Dec-09 06:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2011-Dec-09 06:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2011-Dec-09 06:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2011-Dec-09 06:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2011-Dec-09 06:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2011-Dec-09 06:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2011-Dec-09 06:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.096 (still bad) 2011-Dec-09 06:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.093 (still bad) 2011-Dec-09 06:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.093 (still bad) 2011-Dec-09 06:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.095 (still bad) 2011-Dec-09 06:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.093 (still bad) 2011-Dec-09 06:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.094 (still bad) 2011-Dec-09 06:16:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-09 06:16:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.901 1.013 0.895 1.096 2011-Dec-09 06:16:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.096 0.955 1.002 1.086 2011-Dec-09 06:16:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.796 0.892 0.956 0.880 2011-Dec-09 06:16:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.026 0.942 0.027 2011-Dec-09 06:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2011-Dec-09 06:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2011-Dec-09 06:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2011-Dec-09 06:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2011-Dec-09 06:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2011-Dec-09 06:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.097 (still bad) 2011-Dec-09 06:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.094 (still bad) 2011-Dec-09 06:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.095 (still bad) 2011-Dec-09 06:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.095 (still bad) 2011-Dec-09 06:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.093 (still bad) 2011-Dec-09 06:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.094 (still bad) 2011-Dec-09 06:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.097 (still bad) 2011-Dec-09 06:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.092 (still bad) 2011-Dec-09 06:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.094 (still bad) 2011-Dec-09 06:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.096 (still bad) 2011-Dec-09 06:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.094 (still bad) 2011-Dec-09 06:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2011-Dec-09 06:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.093 (still bad) 2011-Dec-09 06:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.093 (still bad) 2011-Dec-09 06:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.093 (still bad) 2011-Dec-09 06:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.093 (still bad) 2011-Dec-09 06:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.093 (still bad) 2011-Dec-09 06:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.096 (still bad) 2011-Dec-09 06:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.093 (still bad) 2011-Dec-09 06:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.093 (still bad) 2011-Dec-09 06:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.095 (still bad) 2011-Dec-09 06:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.093 (still bad) 2011-Dec-09 06:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.093 (still bad) 2011-Dec-09 06:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.094 (still bad) 2011-Dec-09 06:17:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2011-Dec-09 06:17:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.902 1.010 0.894 1.092 2011-Dec-09 06:17:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.090 0.953 1.000 1.084 2011-Dec-09 06:17:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.798 0.892 0.956 0.881 2011-Dec-09 06:17:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 0.026 0.944 0.026 2011-Dec-09 06:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.092 (still bad) 2011-Dec-09 06:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2011-Dec-09 06:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.091 (still bad) 2011-Dec-09 06:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.091 (still bad) 2011-Dec-09 06:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2011-Dec-09 06:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.096 (still bad) 2011-Dec-09 06:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.092 (still bad) 2011-Dec-09 06:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.094 (still bad) 2011-Dec-09 06:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.094 (still bad) 2011-Dec-09 06:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.095 (still bad) 2011-Dec-09 06:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.096 (still bad) 2011-Dec-09 06:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 06:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2011-Dec-09 06:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2011-Dec-09 06:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2011-Dec-09 06:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2011-Dec-09 06:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2011-Dec-09 06:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2011-Dec-09 06:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2011-Dec-09 06:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2011-Dec-09 06:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2011-Dec-09 06:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2011-Dec-09 06:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2011-Dec-09 06:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.099 (still bad) 2011-Dec-09 06:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.098 (still bad) 2011-Dec-09 06:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.099 (still bad) 2011-Dec-09 06:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.096 (still bad) 2011-Dec-09 06:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.096 (still bad) 2011-Dec-09 06:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2011-Dec-09 06:19:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2011-Dec-09 06:19:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.902 1.012 0.893 1.093 2011-Dec-09 06:19:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.096 0.957 1.003 1.085 2011-Dec-09 06:19:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.793 0.890 0.954 0.880 2011-Dec-09 06:19:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 0.027 0.938 0.027 2011-Dec-09 06:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2011-Dec-09 06:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.093 (still bad) 2011-Dec-09 06:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.092 (still bad) 2011-Dec-09 06:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.093 (still bad) 2011-Dec-09 06:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.099 (still bad) 2011-Dec-09 06:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.094 (still bad) 2011-Dec-09 06:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.096 (still bad) 2011-Dec-09 06:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.094 (still bad) 2011-Dec-09 06:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.093 (still bad) 2011-Dec-09 06:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.095 (still bad) 2011-Dec-09 06:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2011-Dec-09 06:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.091 (still bad) 2011-Dec-09 06:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.092 (still bad) 2011-Dec-09 06:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2011-Dec-09 06:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.091 (still bad) 2011-Dec-09 06:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2011-Dec-09 06:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2011-Dec-09 06:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.092 (still bad) 2011-Dec-09 06:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.092 (still bad) 2011-Dec-09 06:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.094 (still bad) 2011-Dec-09 06:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.092 (still bad) 2011-Dec-09 06:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.093 (still bad) 2011-Dec-09 06:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2011-Dec-09 06:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.094 (still bad) 2011-Dec-09 06:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.096 (still bad) 2011-Dec-09 06:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.096 (still bad) 2011-Dec-09 06:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.091 (still bad) 2011-Dec-09 06:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.094 (still bad) 2011-Dec-09 06:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2011-Dec-09 06:20:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-09 06:20:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.901 1.009 0.891 1.092 2011-Dec-09 06:20:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.094 0.952 0.997 1.083 2011-Dec-09 06:20:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.795 0.889 0.969 0.893 2011-Dec-09 06:20:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 0.024 0.938 0.024 2011-Dec-09 06:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.092 (still bad) 2011-Dec-09 06:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.094 (still bad) 2011-Dec-09 06:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.092 (still bad) 2011-Dec-09 06:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.092 (still bad) 2011-Dec-09 06:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.098 (still bad) 2011-Dec-09 06:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.092 (still bad) 2011-Dec-09 06:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.091 (still bad) 2011-Dec-09 06:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.093 (still bad) 2011-Dec-09 06:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.092 (still bad) 2011-Dec-09 06:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.093 (still bad) 2011-Dec-09 06:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2011-Dec-09 06:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.097 (still bad) 2011-Dec-09 06:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.096 (still bad) 2011-Dec-09 06:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.096 (still bad) 2011-Dec-09 06:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.091 (still bad) 2011-Dec-09 06:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.093 (still bad) 2011-Dec-09 06:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2011-Dec-09 06:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.093 (still bad) 2011-Dec-09 06:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.094 (still bad) 2011-Dec-09 06:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2011-Dec-09 06:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2011-Dec-09 06:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2011-Dec-09 06:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.110 (still bad) 2011-Dec-09 06:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.108 (still bad) 2011-Dec-09 06:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.108 (still bad) 2011-Dec-09 06:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2011-Dec-09 06:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2011-Dec-09 06:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2011-Dec-09 06:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2011-Dec-09 06:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2011-Dec-09 06:21:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2011-Dec-09 06:21:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 1.012 0.895 1.096 2011-Dec-09 06:21:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.100 0.960 1.000 1.086 2011-Dec-09 06:21:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.796 0.890 0.954 0.879 2011-Dec-09 06:21:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.024 0.940 0.024 2011-Dec-09 06:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2011-Dec-09 06:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2011-Dec-09 06:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2011-Dec-09 06:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2011-Dec-09 06:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2011-Dec-09 06:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2011-Dec-09 06:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2011-Dec-09 06:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2011-Dec-09 06:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2011-Dec-09 06:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-09 06:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-09 06:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.094 (still bad) 2011-Dec-09 06:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.094 (still bad) 2011-Dec-09 06:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.095 (still bad) 2011-Dec-09 06:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.096 (still bad) 2011-Dec-09 06:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2011-Dec-09 06:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2011-Dec-09 06:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2011-Dec-09 06:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2011-Dec-09 06:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2011-Dec-09 06:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2011-Dec-09 06:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.099 (still bad) 2011-Dec-09 06:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.096 (still bad) 2011-Dec-09 06:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.098 (still bad) 2011-Dec-09 06:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.098 (still bad) 2011-Dec-09 06:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.097 (still bad) 2011-Dec-09 06:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.098 (still bad) 2011-Dec-09 06:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.098 (still bad) 2011-Dec-09 06:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.097 (still bad) 2011-Dec-09 06:22:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2011-Dec-09 06:22:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.902 1.011 0.897 1.098 2011-Dec-09 06:22:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 0.954 1.002 1.086 2011-Dec-09 06:22:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.796 0.893 0.952 0.876 2011-Dec-09 06:22:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.075 0.023 0.938 0.023 2011-Dec-09 06:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.098 (still bad) 2011-Dec-09 06:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.098 (still bad) 2011-Dec-09 06:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.098 (still bad) 2011-Dec-09 06:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.099 (still bad) 2011-Dec-09 06:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.094 (still bad) 2011-Dec-09 06:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.096 (still bad) 2011-Dec-09 06:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.095 (still bad) 2011-Dec-09 06:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.096 (still bad) 2011-Dec-09 06:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.095 (still bad) 2011-Dec-09 06:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.096 (still bad) 2011-Dec-09 06:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.095 (still bad) 2011-Dec-09 06:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.096 (still bad) 2011-Dec-09 06:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.095 (still bad) 2011-Dec-09 06:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.095 (still bad) 2011-Dec-09 06:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.104 (still bad) 2011-Dec-09 06:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2011-Dec-09 06:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2011-Dec-09 06:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2011-Dec-09 06:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2011-Dec-09 06:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2011-Dec-09 06:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2011-Dec-09 06:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.098 (still bad) 2011-Dec-09 06:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.097 (still bad) 2011-Dec-09 06:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2011-Dec-09 06:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.098 (still bad) 2011-Dec-09 06:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2011-Dec-09 06:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.106 (still bad) 2011-Dec-09 06:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2011-Dec-09 06:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2011-Dec-09 06:23:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-09 06:23:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.902 1.014 0.900 1.104 2011-Dec-09 06:23:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.094 0.956 1.001 1.089 2011-Dec-09 06:23:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.796 0.894 0.954 0.879 2011-Dec-09 06:23:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 0.025 0.942 0.026 2011-Dec-09 06:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2011-Dec-09 06:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2011-Dec-09 06:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2011-Dec-09 06:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2011-Dec-09 06:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.099 (still bad) 2011-Dec-09 06:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2011-Dec-09 06:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.098 (still bad) 2011-Dec-09 06:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.097 (still bad) 2011-Dec-09 06:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.105 (still bad) 2011-Dec-09 06:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.100 (still bad) 2011-Dec-09 06:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.097 (still bad) 2011-Dec-09 06:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.099 (still bad) 2011-Dec-09 06:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.097 (still bad) 2011-Dec-09 06:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.097 (still bad) 2011-Dec-09 06:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2011-Dec-09 06:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.099 (still bad) 2011-Dec-09 06:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.098 (still bad) 2011-Dec-09 06:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.099 (still bad) 2011-Dec-09 06:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.098 (still bad) 2011-Dec-09 06:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.098 (still bad) 2011-Dec-09 06:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.102 (still bad) 2011-Dec-09 06:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2011-Dec-09 06:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.098 (still bad) 2011-Dec-09 06:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2011-Dec-09 06:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2011-Dec-09 06:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2011-Dec-09 06:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2011-Dec-09 06:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2011-Dec-09 06:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.099 (still bad) 2011-Dec-09 06:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.099 (still bad) 2011-Dec-09 06:24:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2011-Dec-09 06:24:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.904 1.011 0.897 1.099 2011-Dec-09 06:24:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.095 0.956 1.004 1.090 2011-Dec-09 06:24:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.796 0.896 0.957 0.881 2011-Dec-09 06:24:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.084 0.025 0.943 0.025 2011-Dec-09 06:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2011-Dec-09 06:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.105 (still bad) 2011-Dec-09 06:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.099 (still bad) 2011-Dec-09 06:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.099 (still bad) 2011-Dec-09 06:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.100 (still bad) 2011-Dec-09 06:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.099 (still bad) 2011-Dec-09 06:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.100 (still bad) 2011-Dec-09 06:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2011-Dec-09 06:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2011-Dec-09 06:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2011-Dec-09 06:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2011-Dec-09 06:24:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Dec-09 06:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2011-Dec-09 06:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2011-Dec-09 06:24:36 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Dec-09 06:24:36 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Dec-09 06:24:36 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Dec-09 06:24:36 LOG5 end_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2011-Dec-09 06:24:36 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Dec-09 06:24:36 LOG5 end_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2011-Dec-09 06:24:36 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Dec-09 06:24:36 LOG5 finish_task: Level: (2) ID = <10274> Status = 0 0 0 0 ok 2011-Dec-09 06:24:36 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Dec-09 06:24:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-09 06:24:36 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Dec-09 06:24:36 LOG5 end_task: Level: (2) ID = <10274> Status = 0 0 0 0 ok 2011-Dec-09 06:24:36 COMMAND run_command_line: EXECUTING command 65: 'ENDIF' 2011-Dec-09 06:24:36 NOTE run_command_file: DONE with command file processing 2011-Dec-09 06:24:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2011-Dec-09 06:24:36 STOP finish_task: Finishing task 'running command file '111209.cmd'' 2011-Dec-09 06:24:36 LOG5 finish_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2011-Dec-09 06:24:36 DONE finish_task: DONE finished running: command file '111209.cmd' 2011-Dec-09 06:24:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Dec-09 06:24:36 END end_task: Finishing task 'running command file '111209.cmd'' with status 'OK' 2011-Dec-09 06:24:36 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2011-Dec-09 06:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2011-Dec-09 06:25:02 ALERT CIMA-exit_cima: Exiting CIMA ... 2011-Dec-09 06:25:02 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2011-Dec-09 06:25:02 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2011-Dec-09 06:25:02 LOG3 vw_send: To DATATAKING: mvdata a2048 2011-Dec-09 06:25:02 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2011-Dec-09 06:25:02 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2011-Dec-09 06:25:02 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2011-Dec-09 06:25:02 LOG4 got_cormsg: From DATATAKING: mvdata a2048 2011-Dec-09 06:25:02 NOTE CIMA-exit_cima: Cleaning up session ... 2011-Dec-09 06:25:02 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2011-Dec-09 06:25:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 06:25:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Dec-09 06:25:05 LOG3 exec_msg: Closing socket