2011-Feb-03 00:20:03 BEGIN executive: CIMA executive starting ... 2011-Feb-03 00:20:03 NOTE executive: STARTING NEW CIMA SESSION 2011-Feb-03 00:20:03 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2011-Feb-03 00:20:03 INFO4 executive: This is an ON-LINE session 2011-Feb-03 00:20:03 INFO4 executive: This is a LOCAL session 2011-Feb-03 00:20:03 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2011-Feb-03 00:20:03 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'Israel Cabrera' 2011-Feb-03 00:20:03 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20110203' 2011-Feb-03 00:20:03 LOG2 log_preferences: Currently applied preferences: 2011-Feb-03 00:20:03 LOG2 log_preferences: prefs(dailylog) = daily 2011-Feb-03 00:20:03 LOG2 log_preferences: prefs(offlinelog) = skip 2011-Feb-03 00:20:03 LOG2 log_preferences: prefs(datawindow) = ignore 2011-Feb-03 00:20:03 LOG2 log_preferences: prefs(limitwarning) = enabled 2011-Feb-03 00:20:03 LOG2 log_preferences: prefs(wappfailure) = abort 2011-Feb-03 00:20:03 LOG2 log_preferences: prefs(helpstyle) = stay-open 2011-Feb-03 00:20:03 LOG2 log_preferences: prefs(logcolours) = full 2011-Feb-03 00:20:03 LOG2 log_preferences: prefs(displaylevel) = INFO3 2011-Feb-03 00:20:03 LOG2 log_preferences: prefs(loglevel) = LOG5 2011-Feb-03 00:20:03 LOG2 log_preferences: prefs(displayformat) = short 2011-Feb-03 00:20:03 LOG2 log_preferences: prefs(logformat) = new 2011-Feb-03 00:20:03 LOG2 log_preferences: prefs(fontsize) = 4 2011-Feb-03 00:20:03 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2011-Feb-03 00:20:03 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2011-Feb-03 00:20:03 ALERT executive: CIMA executive ready 2011-Feb-03 00:20:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:04 LOG4 got_cormsg: From DATATAKING: source $baseTcl/Setups/setups.cor 2011-Feb-03 00:20:04 LOG4 got_cormsg: From DATATAKING: vw% init 2011-Feb-03 00:20:04 NOTE frontend: CIMA frontend ready 2011-Feb-03 00:20:07 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:07 LOG4 got_cormsg: From DATATAKING: setup 2011-Feb-03 00:20:07 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2011-Feb-03 00:20:07 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2011-Feb-03 00:20:07 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2011-Feb-03 00:20:07 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2011-Feb-03 00:20:07 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Feb-03 00:20:07 NOTE select_receiver: Starting to select receiver ALFA 2011-Feb-03 00:20:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2011-Feb-03 00:20:07 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2011-Feb-03 00:20:08 LOG3 vw_send: To DATATAKING: acvlbical off 2011-Feb-03 00:20:08 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2011-Feb-03 00:20:08 STOP finish_task: Finishing task 'selecting receiver ALFA' 2011-Feb-03 00:20:08 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Feb-03 00:20:08 DONE finish_task: DONE finished selecting: receiver ALFA 2011-Feb-03 00:20:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Feb-03 00:20:08 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2011-Feb-03 00:20:08 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2011-Feb-03 00:20:12 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2011-Feb-03 00:20:12 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2011-Feb-03 00:20:12 LOG4 got_cormsg: From DATATAKING: vw% io 2011-Feb-03 00:20:12 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2011-Feb-03 00:20:12 LOG4 got_cormsg: From DATATAKING: 2011-Feb-03 00:20:12 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2011-Feb-03 00:20:12 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2011-Feb-03 00:20:12 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2011-Feb-03 00:20:12 LOG4 got_cormsg: From DATATAKING: vw% connectall 2011-Feb-03 00:20:12 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2011-Feb-03 00:20:12 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2011-Feb-03 00:20:12 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2011-Feb-03 00:20:12 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2011-Feb-03 00:20:12 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2011-Feb-03 00:20:12 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2011-Feb-03 00:20:12 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2011-Feb-03 00:20:12 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2011-Feb-03 00:20:12 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2011-Feb-03 00:20:12 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2011-Feb-03 00:20:12 LOG4 got_cormsg: From DATATAKING: acvlbical off 2011-Feb-03 00:20:12 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:12 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:19 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:19 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:31 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima31.cmd' (at lines 1 - 24) 2011-Feb-03 00:20:31 INFO4 CIMA-load_command_file: Loaded command file '110203.cmd' 2011-Feb-03 00:20:35 INFO1 CIMA-run_command_file: Transferring command file '110203.cmd' to executive ... 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_cima31.conf} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 28 {LOAD ages_mock.conf} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 29 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 30 {CATALOG AGESFull.cat} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 33 {IF LSTSLEW(AGES3193_p2_108) < 090738 THEN} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 34 {FIXEDDRIFT az=253.60 alfaangle=-56.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_108 ra=95300.00 dec=211230.00} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 37 {ENDIF} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 40 {IF LSTSLEW(AGES3193_p2_112) < 093038 THEN} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 41 {FIXEDDRIFT az=242.56 alfaangle=-41.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_112 ra=95300.00 dec=210630.00} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 44 {ENDIF} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 47 {IF LSTSLEW(AGES3193_p2_114) < 095338 THEN} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 48 {FIXEDDRIFT az=180.02 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_114 ra=95300.00 dec=210330.00} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 51 {ENDIF} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 26 54 {IF LSTSLEW(AGES3193_p2_116) < 101638 THEN} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 27 55 {FIXEDDRIFT az=116.58 alfaangle=81.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_116 ra=95300.00 dec=210030.00} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 28 58 {ENDIF} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 29 61 {IF LSTSLEW(AGES3193_p2_118) < 103938 THEN} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 30 62 {FIXEDDRIFT az=105.13 alfaangle=-83.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_118 ra=95300.00 dec=205730.00} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 31 65 {ENDIF} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 32 68 {IF LSTSLEW(AGESVC1A_p3_020) < 112235 THEN} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 33 69 {FIXEDDRIFT az=309.38 alfaangle=62.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p3_020 ra=120900.00 dec=83130.00} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 34 72 {ENDIF} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 35 75 {IF LSTSLEW(AGESVC1A_p3_038) < 114535 THEN} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 36 76 {FIXEDDRIFT az=329.80 alfaangle=44.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p3_038 ra=120900.00 dec=80430.00} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 37 79 {ENDIF} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 38 82 {IF LSTSLEW(AGESVC1A_p3_040) < 120835 THEN} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 39 83 {FIXEDDRIFT az=358.63 alfaangle=20.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p3_040 ra=120900.00 dec=80130.00} 2011-Feb-03 00:20:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 40 86 {ENDIF} 2011-Feb-03 00:20:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 41 89 {IF LSTSLEW(AGESVC1B_p3_038) < 123035 THEN} 2011-Feb-03 00:20:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 42 90 {FIXEDDRIFT az=1.38 alfaangle=18.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p3_038 ra=122900.00 dec=80430.00} 2011-Feb-03 00:20:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 43 93 {ENDIF} 2011-Feb-03 00:20:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 44 96 {IF LSTSLEW(AGESVC1B_p3_040) < 125335 THEN} 2011-Feb-03 00:20:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 45 97 {FIXEDDRIFT az=30.08 alfaangle=-6.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p3_040 ra=122900.00 dec=80130.00} 2011-Feb-03 00:20:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 46 100 {ENDIF} 2011-Feb-03 00:20:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 47 103 {IF LSTSLEW(AGESVC1B_p3_020) < 131635 THEN} 2011-Feb-03 00:20:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 48 104 {FIXEDDRIFT az=50.62 alfaangle=-24.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p3_020 ra=122900.00 dec=83130.00} 2011-Feb-03 00:20:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 49 107 {ENDIF} 2011-Feb-03 00:20:36 COMMAND CIMA-send_to_exec: Sending command to run command file 2011-Feb-03 00:20:36 LOG4 exec_msg: From OBSERVER: run_command_file 110203.cmd 1 1 49 2011-Feb-03 00:20:36 LOG4 run_command_file: Calling 'run_command_file 110203.cmd 1 1 49' 2011-Feb-03 00:20:36 BEGIN begin_task: Starting task 'running command file '110203.cmd'' 2011-Feb-03 00:20:36 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2011-Feb-03 00:20:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '110203.cmd' ...} 2011-Feb-03 00:20:36 NOTE run_command_file: Starting execution of command file '110203.cmd' from line 1 2011-Feb-03 00:20:36 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_cima31.conf' 2011-Feb-03 00:20:36 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2011-Feb-03 00:20:36 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Feb-03 00:20:36 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2011-Feb-03 00:20:36 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima31.conf' 2011-Feb-03 00:20:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2011-Feb-03 00:20:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2011-Feb-03 00:20:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2011-Feb-03 00:20:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2011-Feb-03 00:20:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2011-Feb-03 00:20:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2011-Feb-03 00:20:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2011-Feb-03 00:20:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2011-Feb-03 00:20:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2011-Feb-03 00:20:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2011-Feb-03 00:20:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2011-Feb-03 00:20:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Feb-03 00:20:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Feb-03 00:20:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Feb-03 00:20:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Feb-03 00:20:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2011-Feb-03 00:20:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2011-Feb-03 00:20:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2011-Feb-03 00:20:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2011-Feb-03 00:20:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2011-Feb-03 00:20:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2011-Feb-03 00:20:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2011-Feb-03 00:20:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2011-Feb-03 00:20:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Feb-03 00:20:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Feb-03 00:20:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Feb-03 00:20:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Feb-03 00:20:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2011-Feb-03 00:20:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2011-Feb-03 00:20:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2011-Feb-03 00:20:38 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Feb-03 00:20:38 BEGIN begin_task: Starting task 'configuring IF/LO path' 2011-Feb-03 00:20:38 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Feb-03 00:20:38 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2011-Feb-03 00:20:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2011-Feb-03 00:20:38 INFO1 config_iflo: Selecting receiver ALFA 2011-Feb-03 00:20:38 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2011-Feb-03 00:20:38 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2011-Feb-03 00:20:38 START begin_task: Starting task 'selecting receiver ALFA' 2011-Feb-03 00:20:38 LOG5 begin_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Feb-03 00:20:38 NOTE select_receiver: Starting to select receiver ALFA 2011-Feb-03 00:20:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2011-Feb-03 00:20:38 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2011-Feb-03 00:20:38 LOG3 vw_send: To DATATAKING: acvlbical off 2011-Feb-03 00:20:38 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2011-Feb-03 00:20:38 STOP finish_task: Finishing task 'selecting receiver ALFA' 2011-Feb-03 00:20:38 LOG5 finish_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Feb-03 00:20:38 INFO2 finish_task: DONE finished selecting: receiver ALFA 2011-Feb-03 00:20:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 00:20:38 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2011-Feb-03 00:20:38 LOG5 end_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2011-Feb-03 00:20:38 START begin_task: Starting task 'waiting for receiver ALFA' 2011-Feb-03 00:20:38 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2011-Feb-03 00:20:38 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2011-Feb-03 00:20:38 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2011-Feb-03 00:20:38 INFO1 config_iflo: Configuring rest of the IF/LO path 2011-Feb-03 00:20:38 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2011-Feb-03 00:20:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Feb-03 00:20:38 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Feb-03 00:20:38 START begin_task: Starting task 'waiting on command to ALFA' 2011-Feb-03 00:20:38 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2011-Feb-03 00:20:38 LOG4 got_alfamon: From ALFAMON: ACK 2011-Feb-03 00:20:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Feb-03 00:20:38 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2011-Feb-03 00:20:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Feb-03 00:20:38 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Feb-03 00:20:38 LOG3 vw_send: To DATATAKING: alfafb 1 2011-Feb-03 00:20:38 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2011-Feb-03 00:20:39 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2011-Feb-03 00:20:39 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2011-Feb-03 00:20:39 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2011-Feb-03 00:20:39 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2011-Feb-03 00:20:39 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2011-Feb-03 00:20:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2011-Feb-03 00:20:39 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2011-Feb-03 00:20:39 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2011-Feb-03 00:20:39 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2011-Feb-03 00:20:39 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2011-Feb-03 00:20:39 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2011-Feb-03 00:20:39 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2011-Feb-03 00:20:39 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2011-Feb-03 00:20:39 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2011-Feb-03 00:20:39 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2011-Feb-03 00:20:39 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2011-Feb-03 00:20:39 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2011-Feb-03 00:20:39 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2011-Feb-03 00:20:39 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2011-Feb-03 00:20:39 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2011-Feb-03 00:20:39 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2011-Feb-03 00:20:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:20:39 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2011-Feb-03 00:20:39 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2011-Feb-03 00:20:39 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2011-Feb-03 00:20:39 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2011-Feb-03 00:20:39 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2011-Feb-03 00:20:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2011-Feb-03 00:20:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 00:20:39 START begin_task: Starting task 'waiting on configuring IF/LO path' 2011-Feb-03 00:20:39 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2011-Feb-03 00:20:39 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2011-Feb-03 00:20:39 LOG4 got_cormsg: From DATATAKING: acvlbical off 2011-Feb-03 00:20:39 LOG4 got_cormsg: From DATATAKING: alfafb 1 2011-Feb-03 00:20:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2011-Feb-03 00:20:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2011-Feb-03 00:20:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2011-Feb-03 00:20:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2011-Feb-03 00:20:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2011-Feb-03 00:20:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2011-Feb-03 00:20:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2011-Feb-03 00:20:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2011-Feb-03 00:20:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2011-Feb-03 00:20:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2011-Feb-03 00:20:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2011-Feb-03 00:20:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2011-Feb-03 00:20:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2011-Feb-03 00:20:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2011-Feb-03 00:20:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:20:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2011-Feb-03 00:20:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2011-Feb-03 00:20:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2011-Feb-03 00:20:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2011-Feb-03 00:20:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 00:20:45 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:45 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:47 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:51 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:51 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:52 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:53 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:53 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:53 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:53 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:53 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:53 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:54 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:54 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:54 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:54 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:54 LOG4 got_cormsg: From DATATAKING: DONE 2011-Feb-03 00:20:54 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2011-Feb-03 00:20:54 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2011-Feb-03 00:20:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2011-Feb-03 00:20:54 STOP finish_task: Finishing task 'configuring IF/LO path' 2011-Feb-03 00:20:54 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Feb-03 00:20:54 DONE finish_task: DONE finished configuration: IF/LO path 2011-Feb-03 00:20:54 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Feb-03 00:20:54 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2011-Feb-03 00:20:54 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2011-Feb-03 00:20:54 BEGIN begin_task: Starting task 'configuring WAPPs' 2011-Feb-03 00:20:54 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2011-Feb-03 00:20:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2011-Feb-03 00:20:54 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2011-Feb-03 00:20:54 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Feb-03 00:20:54 START begin_task: Starting task 'selecting calibration port' 2011-Feb-03 00:20:54 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2011-Feb-03 00:20:54 LOG3 vw_send: To DATATAKING: calport 3 2011-Feb-03 00:20:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Feb-03 00:20:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 00:20:55 START begin_task: Starting task 'waiting on calport' 2011-Feb-03 00:20:55 LOG5 begin_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2011-Feb-03 00:20:55 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:55 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Feb-03 00:20:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 00:20:55 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:55 LOG4 got_cormsg: From DATATAKING: DONE 2011-Feb-03 00:20:55 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Feb-03 00:20:55 LOG5 end_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2011-Feb-03 00:20:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Feb-03 00:20:55 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Feb-03 00:20:55 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2011-Feb-03 00:20:55 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Feb-03 00:20:55 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Feb-03 00:20:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Feb-03 00:20:55 LOG5 begin_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2011-Feb-03 00:20:55 LOG3 CALCONTROL-caltrig: Software trigger 2011-Feb-03 00:20:55 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Feb-03 00:20:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Feb-03 00:20:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Feb-03 00:20:55 LOG5 end_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2011-Feb-03 00:20:55 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2011-Feb-03 00:20:55 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2011-Feb-03 00:20:55 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2011-Feb-03 00:20:55 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2011-Feb-03 00:20:55 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2011-Feb-03 00:20:55 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2011-Feb-03 00:20:55 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2011-Feb-03 00:20:55 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2011-Feb-03 00:20:55 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel Cabrera 2011-Feb-03 00:20:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel Cabrera 2011-Feb-03 00:20:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel Cabrera 2011-Feb-03 00:20:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel Cabrera 2011-Feb-03 00:20:55 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Feb-03 00:20:55 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Feb-03 00:20:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Feb-03 00:20:55 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2011-Feb-03 00:20:55 LOG3 CALCONTROL-caltrig: Software trigger 2011-Feb-03 00:20:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Feb-03 00:20:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Feb-03 00:20:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Feb-03 00:20:55 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2011-Feb-03 00:20:55 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel Cabrera 2011-Feb-03 00:20:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel Cabrera 2011-Feb-03 00:20:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel Cabrera 2011-Feb-03 00:20:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel Cabrera 2011-Feb-03 00:20:56 STOP finish_task: Finishing task 'configuring WAPPs' 2011-Feb-03 00:20:56 LOG5 finish_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2011-Feb-03 00:20:56 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2011-Feb-03 00:20:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Feb-03 00:20:56 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2011-Feb-03 00:20:56 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2011-Feb-03 00:20:56 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2011-Feb-03 00:20:56 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2011-Feb-03 00:20:56 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2011-Feb-03 00:20:56 LOG3 is_if_valid: Current source data: down 274.9 47.9 123 - - 264 6.2 2011-Feb-03 00:20:56 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2011-Feb-03 00:20:56 INFO5 is_if_valid: Condition parsed as: 0 2011-Feb-03 00:20:56 INFO1 is_if_valid: Skipping line 'IF isup(galfasrc) then' 2011-Feb-03 00:20:56 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2011-Feb-03 00:20:56 INFO1 run_command_line: Skipping line 'GOTO galfasrc' in non-true conditional branch 2011-Feb-03 00:20:56 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2011-Feb-03 00:20:56 LOG3 is_if_valid: Current source data: up 249.2 14.2 UP - - 139 5.1 2011-Feb-03 00:20:56 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc2) 2011-Feb-03 00:20:56 INFO5 is_if_valid: Condition parsed as: 1 2011-Feb-03 00:20:56 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2011-Feb-03 00:20:56 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc2 nooffset nowait' 2011-Feb-03 00:20:56 BEGIN begin_task: Starting task 'tracking source 'galfasrc2'' 2011-Feb-03 00:20:56 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2011-Feb-03 00:20:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc2' ...} 2011-Feb-03 00:20:56 LOG3 track_source: Calling 'track_source galfasrc2 094300.0 +225300 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2011-Feb-03 00:20:56 START begin_task: Starting task 'sending tracking commands' 2011-Feb-03 00:20:56 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2011-Feb-03 00:20:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc2} INFO {Slewing to source 'galfasrc2' ...} 2011-Feb-03 00:20:56 INFO1 track_source: Starting to track galfasrc2 2011-Feb-03 00:20:56 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc2" 2011-Feb-03 00:20:56 LOG3 vw_send: To DATATAKING: set ra 094300.0 2011-Feb-03 00:20:56 LOG3 vw_send: To DATATAKING: set dec +225300 2011-Feb-03 00:20:57 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Feb-03 00:20:57 LOG3 vw_send: To DATATAKING: pnt tr 094300.0 +225300 -CJ 2011-Feb-03 00:20:57 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2011-Feb-03 00:20:57 STOP finish_task: Finishing task 'sending tracking commands' 2011-Feb-03 00:20:57 LOG5 finish_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2011-Feb-03 00:20:57 INFO2 finish_task: DONE finished sending: tracking commands 2011-Feb-03 00:20:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 00:20:57 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Feb-03 00:20:57 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2011-Feb-03 00:20:57 STOP finish_task: Finishing task 'tracking source 'galfasrc2'' 2011-Feb-03 00:20:57 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2011-Feb-03 00:20:57 DONE finish_task: DONE finished tracking: source 'galfasrc2' 2011-Feb-03 00:20:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Feb-03 00:20:57 END end_task: Finishing task 'tracking source 'galfasrc2'' with status 'OK' 2011-Feb-03 00:20:57 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2011-Feb-03 00:20:57 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2011-Feb-03 00:20:57 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2011-Feb-03 00:20:57 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2011-Feb-03 00:20:57 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2011-Feb-03 00:20:57 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2011-Feb-03 00:20:57 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2011-Feb-03 00:20:57 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2011-Feb-03 00:20:57 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2011-Feb-03 00:20:57 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2011-Feb-03 00:20:57 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2011-Feb-03 00:20:57 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2011-Feb-03 00:20:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2011-Feb-03 00:20:57 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2011-Feb-03 00:20:57 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2011-Feb-03 00:20:57 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Feb-03 00:20:57 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Feb-03 00:20:57 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2011-Feb-03 00:20:57 NOTE WAPPDATA-new_file: New FITS file: wapp.20110203.a2048.0000.fits 2011-Feb-03 00:20:57 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2011-Feb-03 00:20:57 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc2" 2011-Feb-03 00:20:57 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2011-Feb-03 00:20:57 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2011-Feb-03 00:20:57 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20110203.a2048.0000.fits} 2011-Feb-03 00:20:57 LOG4 got_cormsg: From DATATAKING: set ra 094300.0 2011-Feb-03 00:20:57 LOG4 got_cormsg: From DATATAKING: vw% 094300.0 2011-Feb-03 00:20:57 LOG4 got_cormsg: From DATATAKING: 2011-Feb-03 00:20:57 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:57 LOG4 got_cormsg: From DATATAKING: set dec +225300 2011-Feb-03 00:20:57 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Feb-03 00:20:57 LOG4 got_cormsg: From DATATAKING: pnt tr 094300.0 +225300 -CJ 2011-Feb-03 00:20:57 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2011-Feb-03 00:20:57 LOG4 got_cormsg: From DATATAKING: +225300 2011-Feb-03 00:20:57 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:20:57 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2011-Feb-03 00:20:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2011-Feb-03 00:21:24 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Feb-03 00:21:24 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2011-Feb-03 00:21:24 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Feb-03 00:21:24 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2011-Feb-03 00:21:24 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Feb-03 00:21:24 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2011-Feb-03 00:21:24 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2011-Feb-03 00:21:24 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2011-Feb-03 00:21:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Feb-03 00:21:24 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2011-Feb-03 00:21:24 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2011-Feb-03 00:21:24 COMMAND run_command_line: EXECUTING command 16: 'WAITTRACK' 2011-Feb-03 00:21:24 BEGIN begin_task: Starting task 'waiting on telescope' 2011-Feb-03 00:21:24 LOG5 begin_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2011-Feb-03 00:21:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Feb-03 00:21:24 LOG3 waittrk: Start waittrk 5 2011-Feb-03 00:21:24 START begin_task: Starting task 'waiting on telescope movement' 2011-Feb-03 00:21:24 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2011-Feb-03 00:21:29 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Feb-03 00:21:29 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2011-Feb-03 00:21:29 START begin_task: Starting task 'waiting on telescope on source' 2011-Feb-03 00:21:29 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2011-Feb-03 00:26:04 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Feb-03 00:26:04 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2011-Feb-03 00:26:04 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Feb-03 00:26:04 INFO2 waittrk: Now tracking galfasrc2 2011-Feb-03 00:26:04 LOG4 waittrk: Current telescope position: Az = 247.33 ZA = 13.09 2011-Feb-03 00:26:04 STOP finish_task: Finishing task 'waiting on telescope' 2011-Feb-03 00:26:04 LOG5 finish_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2011-Feb-03 00:26:04 DONE finish_task: DONE finished waiting: telescope on source 2011-Feb-03 00:26:04 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Feb-03 00:26:04 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Feb-03 00:26:04 LOG5 end_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2011-Feb-03 00:26:04 COMMAND run_command_line: EXECUTING command 20: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2011-Feb-03 00:26:04 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2011-Feb-03 00:26:05 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Feb-03 00:26:05 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2011-Feb-03 00:26:05 BEGIN begin_task: Starting task 'smart frequency switching' 2011-Feb-03 00:26:05 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2011-Feb-03 00:26:05 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc2' 2011-Feb-03 00:26:05 INFO1 smartfreq: Starting pattern: Smart frequency switching 2011-Feb-03 00:26:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2011-Feb-03 00:26:05 START begin_task: Starting task 'selecting calibration type' 2011-Feb-03 00:26:05 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2011-Feb-03 00:26:05 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Feb-03 00:26:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Feb-03 00:26:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 00:26:05 START begin_task: Starting task 'waiting on setcal' 2011-Feb-03 00:26:05 LOG5 begin_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2011-Feb-03 00:26:05 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Feb-03 00:26:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 00:26:05 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:26:05 LOG4 got_cormsg: From DATATAKING: DONE 2011-Feb-03 00:26:05 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Feb-03 00:26:05 LOG5 end_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2011-Feb-03 00:26:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Feb-03 00:26:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Feb-03 00:26:05 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Feb-03 00:26:05 START begin_task: Starting task 'waiting on command to ALFA' 2011-Feb-03 00:26:05 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2011-Feb-03 00:26:05 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:26:05 LOG4 got_alfamon: From ALFAMON: ACK 2011-Feb-03 00:26:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Feb-03 00:26:05 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2011-Feb-03 00:26:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Feb-03 00:26:05 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Feb-03 00:26:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Feb-03 00:26:05 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Feb-03 00:26:05 START begin_task: Starting task 'waiting on command to ALFA' 2011-Feb-03 00:26:05 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2011-Feb-03 00:26:05 LOG4 got_alfamon: From ALFAMON: ACK 2011-Feb-03 00:26:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Feb-03 00:26:05 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2011-Feb-03 00:26:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Feb-03 00:26:05 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Feb-03 00:26:05 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Feb-03 00:26:05 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2011-Feb-03 00:26:05 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel Cabrera 2011-Feb-03 00:26:05 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel Cabrera 2011-Feb-03 00:26:05 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel Cabrera 2011-Feb-03 00:26:05 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel Cabrera 2011-Feb-03 00:26:05 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20110203.a2048.0000.fits' is empty! 2011-Feb-03 00:26:05 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2011-Feb-03 00:26:05 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Feb-03 00:26:05 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2011-Feb-03 00:26:05 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Feb-03 00:26:05 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Feb-03 00:26:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Feb-03 00:26:06 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2011-Feb-03 00:26:06 LOG3 CALCONTROL-caltrig: Software trigger 2011-Feb-03 00:26:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Feb-03 00:26:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Feb-03 00:26:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Feb-03 00:26:06 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2011-Feb-03 00:26:06 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2011-Feb-03 00:26:06 START begin_task: Starting task 'adjusting WAPP power' 2011-Feb-03 00:26:06 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2011-Feb-03 00:26:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2011-Feb-03 00:26:06 INFO2 adjust_power: Starting to adjust WAPP power 2011-Feb-03 00:26:06 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Feb-03 00:26:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Feb-03 00:26:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 00:26:06 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Feb-03 00:26:06 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2011-Feb-03 00:26:06 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Feb-03 00:26:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 00:26:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2011-Feb-03 00:26:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:26:09 LOG4 got_cormsg: From DATATAKING: DONE 2011-Feb-03 00:26:09 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Feb-03 00:26:09 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2011-Feb-03 00:26:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Feb-03 00:26:09 START begin_task: Starting task 'adjusting WAPP power' 2011-Feb-03 00:26:09 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2011-Feb-03 00:26:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Feb-03 00:26:09 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Feb-03 00:26:09 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Feb-03 00:26:09 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Feb-03 00:26:09 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Feb-03 00:26:09 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Feb-03 00:26:09 LOG5 begin_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2011-Feb-03 00:26:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Feb-03 00:26:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:26:09 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 7 dB 2011-Feb-03 00:26:09 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 3 3 dB 2011-Feb-03 00:26:09 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 5 dB --- beam 3: 4 3 dB 2011-Feb-03 00:26:09 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 4 0 dB 2011-Feb-03 00:26:09 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Feb-03 00:26:09 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Feb-03 00:26:09 LOG5 end_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2011-Feb-03 00:26:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.949 1.083 ALFA beam 1: 1.082 0.976 2011-Feb-03 00:26:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.996 0.915 ALFA beam 3: 0.934 1.112 2011-Feb-03 00:26:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.951 0.889 ALFA beam 5: 0.924 1.064 2011-Feb-03 00:26:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.095 0.036 ALFA beam 7: 0.930 0.042 2011-Feb-03 00:26:09 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Feb-03 00:26:09 LOG5 finish_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2011-Feb-03 00:26:09 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Feb-03 00:26:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 00:26:09 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Feb-03 00:26:09 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2011-Feb-03 00:26:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Feb-03 00:26:10 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Feb-03 00:26:10 LOG5 finish_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2011-Feb-03 00:26:10 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2011-Feb-03 00:26:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 00:26:10 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Feb-03 00:26:10 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2011-Feb-03 00:26:10 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2011-Feb-03 00:26:10 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Feb-03 00:26:10 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2011-Feb-03 00:26:10 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Feb-03 00:26:10 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.09314 J 2011-Feb-03 00:26:10 LOG2 antvel: Computed apparent RA = 09:43:40.3 Dec = +22:49:42.8 2011-Feb-03 00:26:10 LOG2 antvel: Parameters to Doppler: Topocentric 15969 2011 34 0.0 2011-Feb-03 00:26:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Feb-03 00:26:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2011-Feb-03 00:26:10 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2011-Feb-03 00:26:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 00:26:10 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 00:26:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Feb-03 00:26:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:26:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2011-Feb-03 00:26:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Feb-03 00:26:10 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2011-Feb-03 00:26:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2011-Feb-03 00:26:10 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.852746 2011.0931366453722 18.999933 2011-Feb-03 00:26:10 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 22.883333333333344 2011-Feb-03 00:26:10 LOG4 log_alfabeam: ALFABEAM 1 9.709829320986209 22.835018226078152 2011-Feb-03 00:26:10 LOG4 log_alfabeam: ALFABEAM 2 9.716147248013424 22.790573945847875 2011-Feb-03 00:26:10 LOG4 log_alfabeam: ALFABEAM 3 9.723000637121784 22.838424662146441 2011-Feb-03 00:26:10 LOG4 log_alfabeam: ALFABEAM 4 9.723501273186475 22.931837552074690 2011-Feb-03 00:26:10 LOG4 log_alfabeam: ALFABEAM 5 9.717138099662074 22.976352025016460 2011-Feb-03 00:26:10 LOG4 log_alfabeam: ALFABEAM 6 9.710319816665633 22.927384681483868 2011-Feb-03 00:26:10 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 103400010 2011-Feb-03 00:26:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Feb-03 00:26:10 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2011-Feb-03 00:26:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 00:26:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Feb-03 00:26:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:26:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:26:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:26:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Feb-03 00:26:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15971.00 2011-Feb-03 00:26:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 00:26:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 00:26:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 1.083 1.082 0.976 2011-Feb-03 00:26:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 0.946 1.004 1.151 2011-Feb-03 00:26:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.010 0.900 1.001 1.124 2011-Feb-03 00:26:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.095 0.036 0.930 0.042 2011-Feb-03 00:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.152 (still bad) 2011-Feb-03 00:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.158 (still bad) 2011-Feb-03 00:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.153 (still bad) 2011-Feb-03 00:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.152 (still bad) 2011-Feb-03 00:26:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 00:26:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Feb-03 00:26:21 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2011-Feb-03 00:26:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Feb-03 00:26:21 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2011-Feb-03 00:26:21 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2011-Feb-03 00:26:21 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Feb-03 00:26:21 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2011-Feb-03 00:26:21 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Feb-03 00:26:21 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.09314 J 2011-Feb-03 00:26:21 LOG2 antvel: Computed apparent RA = 09:43:40.3 Dec = +22:49:42.8 2011-Feb-03 00:26:21 LOG2 antvel: Parameters to Doppler: Topocentric 15980 2011 34 0.0 2011-Feb-03 00:26:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Feb-03 00:26:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2011-Feb-03 00:26:21 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2011-Feb-03 00:26:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 00:26:21 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 00:26:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Feb-03 00:26:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:26:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2011-Feb-03 00:26:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Feb-03 00:26:21 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2011-Feb-03 00:26:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2011-Feb-03 00:26:21 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.855810 2011.0931369939412 18.999933 2011-Feb-03 00:26:21 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 22.883333333333347 2011-Feb-03 00:26:21 LOG4 log_alfabeam: ALFABEAM 1 9.709833791958028 22.834897700179820 2011-Feb-03 00:26:21 LOG4 log_alfabeam: ALFABEAM 2 9.716155758464350 22.790565252034074 2011-Feb-03 00:26:21 LOG4 log_alfabeam: ALFABEAM 3 9.723004779341929 22.838535481966257 2011-Feb-03 00:26:21 LOG4 log_alfabeam: ALFABEAM 4 9.723496763062027 22.931958846876793 2011-Feb-03 00:26:21 LOG4 log_alfabeam: ALFABEAM 5 9.717129397222482 22.976360700032508 2011-Feb-03 00:26:21 LOG4 log_alfabeam: ALFABEAM 6 9.710315728670075 22.927271064065359 2011-Feb-03 00:26:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 103400011 2011-Feb-03 00:26:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Feb-03 00:26:22 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2011-Feb-03 00:26:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 00:26:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Feb-03 00:26:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:26:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:26:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:26:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Feb-03 00:26:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15983.00 2011-Feb-03 00:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.154 (still bad) 2011-Feb-03 00:26:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 00:26:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.116 (still bad) 2011-Feb-03 00:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.117 (still bad) 2011-Feb-03 00:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.118 (still bad) 2011-Feb-03 00:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.116 (still bad) 2011-Feb-03 00:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.116 (still bad) 2011-Feb-03 00:26:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 00:26:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Feb-03 00:26:33 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2011-Feb-03 00:26:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Feb-03 00:26:33 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2011-Feb-03 00:26:33 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2011-Feb-03 00:26:33 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Feb-03 00:26:33 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2011-Feb-03 00:26:33 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Feb-03 00:26:33 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.09314 J 2011-Feb-03 00:26:33 LOG2 antvel: Computed apparent RA = 09:43:40.3 Dec = +22:49:42.8 2011-Feb-03 00:26:33 LOG2 antvel: Parameters to Doppler: Topocentric 15993 2011 34 0.0 2011-Feb-03 00:26:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Feb-03 00:26:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2011-Feb-03 00:26:33 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2011-Feb-03 00:26:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 00:26:33 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 00:26:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Feb-03 00:26:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:26:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2011-Feb-03 00:26:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Feb-03 00:26:33 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2011-Feb-03 00:26:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2011-Feb-03 00:26:33 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.859431 2011.0931374058864 18.999933 2011-Feb-03 00:26:33 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666663 22.883333333333333 2011-Feb-03 00:26:33 LOG4 log_alfabeam: ALFABEAM 1 9.709839121822670 22.834754513323293 2011-Feb-03 00:26:33 LOG4 log_alfabeam: ALFABEAM 2 9.716165877258847 22.790555110482849 2011-Feb-03 00:26:33 LOG4 log_alfabeam: ALFABEAM 3 9.723009690706361 22.838667327001890 2011-Feb-03 00:26:33 LOG4 log_alfabeam: ALFABEAM 4 9.723491386421003 22.932102946609625 2011-Feb-03 00:26:33 LOG4 log_alfabeam: ALFABEAM 5 9.717119050035040 22.976370811436780 2011-Feb-03 00:26:33 LOG4 log_alfabeam: ALFABEAM 6 9.710310882437971 22.927135892979578 2011-Feb-03 00:26:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 103400012 2011-Feb-03 00:26:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Feb-03 00:26:34 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2011-Feb-03 00:26:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 00:26:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Feb-03 00:26:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:26:34 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:26:34 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:26:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Feb-03 00:26:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15995.00 2011-Feb-03 00:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.117 (still bad) 2011-Feb-03 00:26:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 00:26:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.113 (still bad) 2011-Feb-03 00:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.114 (still bad) 2011-Feb-03 00:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.114 (still bad) 2011-Feb-03 00:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.114 (still bad) 2011-Feb-03 00:26:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 00:26:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Feb-03 00:26:45 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2011-Feb-03 00:26:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Feb-03 00:26:45 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2011-Feb-03 00:26:45 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2011-Feb-03 00:26:45 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2011-Feb-03 00:26:45 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2011-Feb-03 00:26:45 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Feb-03 00:26:45 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.09314 J 2011-Feb-03 00:26:45 LOG2 antvel: Computed apparent RA = 09:43:40.3 Dec = +22:49:42.8 2011-Feb-03 00:26:45 LOG2 antvel: Parameters to Doppler: Topocentric 16005 2011 34 0.0 2011-Feb-03 00:26:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Feb-03 00:26:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2011-Feb-03 00:26:45 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2011-Feb-03 00:26:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 00:26:45 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 00:26:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Feb-03 00:26:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:26:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2011-Feb-03 00:26:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Feb-03 00:26:45 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2011-Feb-03 00:26:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2011-Feb-03 00:26:45 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.862774 2011.0931377861434 18.999933 2011-Feb-03 00:26:45 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 22.883333333333333 2011-Feb-03 00:26:45 LOG4 log_alfabeam: ALFABEAM 1 9.709844087386958 22.834621591551823 2011-Feb-03 00:26:45 LOG4 log_alfabeam: ALFABEAM 2 9.716175278653964 22.790545877976193 2011-Feb-03 00:26:45 LOG4 log_alfabeam: ALFABEAM 3 9.723014240560346 22.838789904321530 2011-Feb-03 00:26:45 LOG4 log_alfabeam: ALFABEAM 4 9.723486377178402 22.932236715221457 2011-Feb-03 00:26:45 LOG4 log_alfabeam: ALFABEAM 5 9.717109436323629 22.976380008331603 2011-Feb-03 00:26:45 LOG4 log_alfabeam: ALFABEAM 6 9.710306393741597 22.927010225700457 2011-Feb-03 00:26:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 103400013 2011-Feb-03 00:26:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Feb-03 00:26:46 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2011-Feb-03 00:26:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 00:26:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Feb-03 00:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.115 (still bad) 2011-Feb-03 00:26:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:26:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:26:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:26:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2011-Feb-03 00:26:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16007.00 2011-Feb-03 00:26:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 00:26:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.115 (still bad) 2011-Feb-03 00:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.110 (still bad) 2011-Feb-03 00:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.118 (still bad) 2011-Feb-03 00:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.109 (still bad) 2011-Feb-03 00:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.108 (still bad) 2011-Feb-03 00:26:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 00:26:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Feb-03 00:26:57 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2011-Feb-03 00:26:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Feb-03 00:26:57 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2011-Feb-03 00:26:57 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2011-Feb-03 00:26:57 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2011-Feb-03 00:26:57 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2011-Feb-03 00:26:57 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Feb-03 00:26:57 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.09314 J 2011-Feb-03 00:26:57 LOG2 antvel: Computed apparent RA = 09:43:40.3 Dec = +22:49:42.8 2011-Feb-03 00:26:57 LOG2 antvel: Parameters to Doppler: Topocentric 16017 2011 34 0.0 2011-Feb-03 00:26:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Feb-03 00:26:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2011-Feb-03 00:26:57 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2011-Feb-03 00:26:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 00:26:57 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 00:26:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Feb-03 00:26:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:26:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2011-Feb-03 00:26:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Feb-03 00:26:57 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2011-Feb-03 00:26:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2011-Feb-03 00:26:57 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.866116 2011.0931381664004 18.999933 2011-Feb-03 00:26:57 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666663 22.883333333333326 2011-Feb-03 00:26:57 LOG4 log_alfabeam: ALFABEAM 1 9.709849095090512 22.834488004975995 2011-Feb-03 00:26:57 LOG4 log_alfabeam: ALFABEAM 2 9.716184734866296 22.790536776229857 2011-Feb-03 00:26:57 LOG4 log_alfabeam: ALFABEAM 3 9.723018804017636 22.838913273877026 2011-Feb-03 00:26:57 LOG4 log_alfabeam: ALFABEAM 4 9.723481325330054 22.932371152285292 2011-Feb-03 00:26:57 LOG4 log_alfabeam: ALFABEAM 5 9.717099766446696 22.976389066859603 2011-Feb-03 00:26:57 LOG4 log_alfabeam: ALFABEAM 6 9.710301892423661 22.926883748478438 2011-Feb-03 00:26:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 103400014 2011-Feb-03 00:26:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Feb-03 00:26:58 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2011-Feb-03 00:26:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 00:26:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Feb-03 00:26:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:26:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:26:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.109 (still bad) 2011-Feb-03 00:26:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2011-Feb-03 00:26:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16019.00 2011-Feb-03 00:27:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 00:27:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 00:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 00:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 00:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 00:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 00:27:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 00:27:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Feb-03 00:27:09 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2011-Feb-03 00:27:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Feb-03 00:27:09 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2011-Feb-03 00:27:09 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2011-Feb-03 00:27:09 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2011-Feb-03 00:27:09 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2011-Feb-03 00:27:09 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Feb-03 00:27:09 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.09314 J 2011-Feb-03 00:27:09 LOG2 antvel: Computed apparent RA = 09:43:40.3 Dec = +22:49:42.8 2011-Feb-03 00:27:09 LOG2 antvel: Parameters to Doppler: Topocentric 16029 2011 34 0.0 2011-Feb-03 00:27:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Feb-03 00:27:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2011-Feb-03 00:27:09 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2011-Feb-03 00:27:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 00:27:09 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 00:27:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Feb-03 00:27:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:27:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2011-Feb-03 00:27:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Feb-03 00:27:09 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2011-Feb-03 00:27:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2011-Feb-03 00:27:09 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.869459 2011.0931385466574 18.999933 2011-Feb-03 00:27:09 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 22.883333333333333 2011-Feb-03 00:27:09 LOG4 log_alfabeam: ALFABEAM 1 9.709854148463402 22.834353667811087 2011-Feb-03 00:27:09 LOG4 log_alfabeam: ALFABEAM 2 9.716194252110608 22.790527802607542 2011-Feb-03 00:27:09 LOG4 log_alfabeam: ALFABEAM 3 9.723023383842481 22.839037518159692 2011-Feb-03 00:27:09 LOG4 log_alfabeam: ALFABEAM 4 9.723476227313272 22.932506344109107 2011-Feb-03 00:27:09 LOG4 log_alfabeam: ALFABEAM 5 9.717090034049276 22.976397989480880 2011-Feb-03 00:27:09 LOG4 log_alfabeam: ALFABEAM 6 9.710297375772605 22.926756376821622 2011-Feb-03 00:27:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 103400015 2011-Feb-03 00:27:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Feb-03 00:27:10 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2011-Feb-03 00:27:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 00:27:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Feb-03 00:27:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:27:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:27:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:27:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2011-Feb-03 00:27:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16031.00 2011-Feb-03 00:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 00:27:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 00:27:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 00:27:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.942 1.081 1.080 0.974 2011-Feb-03 00:27:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.997 0.917 0.931 1.109 2011-Feb-03 00:27:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.950 0.884 0.919 1.064 2011-Feb-03 00:27:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.092 0.036 0.928 0.042 2011-Feb-03 00:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 00:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 00:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 00:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 00:27:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 00:27:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Feb-03 00:27:21 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2011-Feb-03 00:27:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Feb-03 00:27:21 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2011-Feb-03 00:27:21 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2011-Feb-03 00:27:21 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2011-Feb-03 00:27:21 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2011-Feb-03 00:27:21 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Feb-03 00:27:21 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.09314 J 2011-Feb-03 00:27:21 LOG2 antvel: Computed apparent RA = 09:43:40.3 Dec = +22:49:42.8 2011-Feb-03 00:27:21 LOG2 antvel: Parameters to Doppler: Topocentric 16041 2011 34 0.0 2011-Feb-03 00:27:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Feb-03 00:27:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2011-Feb-03 00:27:21 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2011-Feb-03 00:27:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 00:27:21 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 00:27:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Feb-03 00:27:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:27:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2011-Feb-03 00:27:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Feb-03 00:27:21 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2011-Feb-03 00:27:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2011-Feb-03 00:27:21 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.872801 2011.0931389269147 18.999933 2011-Feb-03 00:27:21 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 22.883333333333326 2011-Feb-03 00:27:21 LOG4 log_alfabeam: ALFABEAM 1 9.709859245023429 22.834218654533977 2011-Feb-03 00:27:21 LOG4 log_alfabeam: ALFABEAM 2 9.716203825255150 22.790518965344923 2011-Feb-03 00:27:21 LOG4 log_alfabeam: ALFABEAM 3 9.723027977326836 22.839162571609108 2011-Feb-03 00:27:21 LOG4 log_alfabeam: ALFABEAM 4 9.723471085630642 22.932642215718634 2011-Feb-03 00:27:21 LOG4 log_alfabeam: ALFABEAM 5 9.717080244379357 22.976406767836838 2011-Feb-03 00:27:21 LOG4 log_alfabeam: ALFABEAM 6 9.710292846474411 22.926628178019666 2011-Feb-03 00:27:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 103400016 2011-Feb-03 00:27:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Feb-03 00:27:22 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2011-Feb-03 00:27:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 00:27:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Feb-03 00:27:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:27:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:27:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:27:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2011-Feb-03 00:27:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16043.00 2011-Feb-03 00:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 00:27:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 00:27:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 00:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.119 (still bad) 2011-Feb-03 00:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 00:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 00:27:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 00:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 00:27:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Feb-03 00:27:33 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2011-Feb-03 00:27:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Feb-03 00:27:33 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2011-Feb-03 00:27:33 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2011-Feb-03 00:27:33 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Feb-03 00:27:33 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Feb-03 00:27:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Feb-03 00:27:33 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2011-Feb-03 00:27:33 LOG3 CALCONTROL-caltrig: Software trigger 2011-Feb-03 00:27:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Feb-03 00:27:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Feb-03 00:27:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Feb-03 00:27:33 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2011-Feb-03 00:27:33 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2011-Feb-03 00:27:33 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2011-Feb-03 00:27:33 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2011-Feb-03 00:27:33 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Feb-03 00:27:33 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.09314 J 2011-Feb-03 00:27:33 LOG2 antvel: Computed apparent RA = 09:43:40.3 Dec = +22:49:42.8 2011-Feb-03 00:27:33 LOG2 antvel: Parameters to Doppler: Topocentric 16053 2011 34 0.0 2011-Feb-03 00:27:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Feb-03 00:27:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2011-Feb-03 00:27:33 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2011-Feb-03 00:27:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 00:27:33 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 00:27:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Feb-03 00:27:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:27:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2011-Feb-03 00:27:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Feb-03 00:27:33 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2011-Feb-03 00:27:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2011-Feb-03 00:27:33 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.876144 2011.0931393071717 18.999933 2011-Feb-03 00:27:33 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 22.883333333333329 2011-Feb-03 00:27:33 LOG4 log_alfabeam: ALFABEAM 1 9.709864388370077 22.834082878397680 2011-Feb-03 00:27:33 LOG4 log_alfabeam: ALFABEAM 2 9.716213460597876 22.790510262080765 2011-Feb-03 00:27:33 LOG4 log_alfabeam: ALFABEAM 3 9.723032587250190 22.839288517951292 2011-Feb-03 00:27:33 LOG4 log_alfabeam: ALFABEAM 4 9.723465896649287 22.932778854388339 2011-Feb-03 00:27:33 LOG4 log_alfabeam: ALFABEAM 5 9.717070390996854 22.976415404097200 2011-Feb-03 00:27:33 LOG4 log_alfabeam: ALFABEAM 6 9.710288301804063 22.926499066321611 2011-Feb-03 00:27:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 103400017 2011-Feb-03 00:27:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Feb-03 00:27:34 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2011-Feb-03 00:27:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 00:27:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Feb-03 00:27:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:27:34 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:27:34 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:27:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2011-Feb-03 00:27:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16055.00 2011-Feb-03 00:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 00:27:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 00:27:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.555 (still bad) 2011-Feb-03 00:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.568 (still bad) 2011-Feb-03 00:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.556 (still bad) 2011-Feb-03 00:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.555 (still bad) 2011-Feb-03 00:27:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 00:27:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Feb-03 00:27:45 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2011-Feb-03 00:27:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Feb-03 00:27:45 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2011-Feb-03 00:27:45 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2011-Feb-03 00:27:45 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2011-Feb-03 00:27:45 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2011-Feb-03 00:27:45 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Feb-03 00:27:45 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.09314 J 2011-Feb-03 00:27:45 LOG2 antvel: Computed apparent RA = 09:43:40.3 Dec = +22:49:42.8 2011-Feb-03 00:27:45 LOG2 antvel: Parameters to Doppler: Topocentric 16065 2011 34 0.0 2011-Feb-03 00:27:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Feb-03 00:27:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2011-Feb-03 00:27:45 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2011-Feb-03 00:27:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 00:27:45 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 00:27:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Feb-03 00:27:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:27:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2011-Feb-03 00:27:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Feb-03 00:27:45 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2011-Feb-03 00:27:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2011-Feb-03 00:27:45 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.879486 2011.0931396874287 18.999933 2011-Feb-03 00:27:45 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 22.883333333333329 2011-Feb-03 00:27:45 LOG4 log_alfabeam: ALFABEAM 1 9.709869575983843 22.833946414630820 2011-Feb-03 00:27:45 LOG4 log_alfabeam: ALFABEAM 2 9.716223152949752 22.790501701008303 2011-Feb-03 00:27:45 LOG4 log_alfabeam: ALFABEAM 3 9.723037210883652 22.839415290837891 2011-Feb-03 00:27:45 LOG4 log_alfabeam: ALFABEAM 4 9.723460662909524 22.932916184387032 2011-Feb-03 00:27:45 LOG4 log_alfabeam: ALFABEAM 5 9.717060479208557 22.976423889949459 2011-Feb-03 00:27:45 LOG4 log_alfabeam: ALFABEAM 6 9.710283744467700 22.926369109826087 2011-Feb-03 00:27:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 103400018 2011-Feb-03 00:27:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Feb-03 00:27:46 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2011-Feb-03 00:27:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 00:27:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Feb-03 00:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.560 (still bad) 2011-Feb-03 00:27:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:27:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:27:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:27:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2011-Feb-03 00:27:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16067.00 2011-Feb-03 00:27:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 00:27:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.542 (still bad) 2011-Feb-03 00:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.509 (still bad) 2011-Feb-03 00:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.511 (still bad) 2011-Feb-03 00:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.508 (still bad) 2011-Feb-03 00:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.508 (still bad) 2011-Feb-03 00:27:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 00:27:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Feb-03 00:27:57 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2011-Feb-03 00:27:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Feb-03 00:27:57 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2011-Feb-03 00:27:57 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2011-Feb-03 00:27:57 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2011-Feb-03 00:27:57 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2011-Feb-03 00:27:57 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Feb-03 00:27:57 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.09314 J 2011-Feb-03 00:27:57 LOG2 antvel: Computed apparent RA = 09:43:40.3 Dec = +22:49:42.8 2011-Feb-03 00:27:57 LOG2 antvel: Parameters to Doppler: Topocentric 16077 2011 34 0.0 2011-Feb-03 00:27:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Feb-03 00:27:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2011-Feb-03 00:27:57 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2011-Feb-03 00:27:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 00:27:57 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 00:27:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Feb-03 00:27:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:27:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2011-Feb-03 00:27:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Feb-03 00:27:57 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2011-Feb-03 00:27:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2011-Feb-03 00:27:57 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.882829 2011.0931400676857 18.999933 2011-Feb-03 00:27:57 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666660 22.883333333333347 2011-Feb-03 00:27:57 LOG4 log_alfabeam: ALFABEAM 1 9.709874811535499 22.833809175508264 2011-Feb-03 00:27:57 LOG4 log_alfabeam: ALFABEAM 2 9.716232908693634 22.790493280053472 2011-Feb-03 00:27:57 LOG4 log_alfabeam: ALFABEAM 3 9.723041851021785 22.839542975257736 2011-Feb-03 00:27:57 LOG4 log_alfabeam: ALFABEAM 4 9.723455380706367 22.933054293971448 2011-Feb-03 00:27:57 LOG4 log_alfabeam: ALFABEAM 5 9.717050502487494 22.976432227260204 2011-Feb-03 00:27:57 LOG4 log_alfabeam: ALFABEAM 6 9.710279171727038 22.926238221494678 2011-Feb-03 00:27:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 103400019 2011-Feb-03 00:27:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Feb-03 00:27:58 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2011-Feb-03 00:27:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 00:27:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Feb-03 00:27:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:27:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:27:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.509 (still bad) 2011-Feb-03 00:27:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2011-Feb-03 00:27:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16079.00 2011-Feb-03 00:28:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 00:28:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.505 (still bad) 2011-Feb-03 00:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.506 (still bad) 2011-Feb-03 00:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.506 (still bad) 2011-Feb-03 00:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.507 (still bad) 2011-Feb-03 00:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.507 (still bad) 2011-Feb-03 00:28:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 00:28:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Feb-03 00:28:09 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2011-Feb-03 00:28:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Feb-03 00:28:09 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2011-Feb-03 00:28:09 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2011-Feb-03 00:28:09 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2011-Feb-03 00:28:09 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2011-Feb-03 00:28:09 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Feb-03 00:28:09 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.09314 J 2011-Feb-03 00:28:09 LOG2 antvel: Computed apparent RA = 09:43:40.3 Dec = +22:49:42.8 2011-Feb-03 00:28:09 LOG2 antvel: Parameters to Doppler: Topocentric 16089 2011 34 0.0 2011-Feb-03 00:28:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Feb-03 00:28:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2011-Feb-03 00:28:09 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2011-Feb-03 00:28:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 00:28:09 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 00:28:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Feb-03 00:28:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:28:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2011-Feb-03 00:28:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Feb-03 00:28:09 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2011-Feb-03 00:28:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2011-Feb-03 00:28:09 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.886171 2011.0931404479427 18.999933 2011-Feb-03 00:28:09 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 22.883333333333333 2011-Feb-03 00:28:09 LOG4 log_alfabeam: ALFABEAM 1 9.709880092467483 22.833671237023115 2011-Feb-03 00:28:09 LOG4 log_alfabeam: ALFABEAM 2 9.716242722582187 22.790485007365188 2011-Feb-03 00:28:09 LOG4 log_alfabeam: ALFABEAM 3 9.723046504914564 22.839671504059879 2011-Feb-03 00:28:09 LOG4 log_alfabeam: ALFABEAM 4 9.723450052618624 22.933193106640619 2011-Feb-03 00:28:09 LOG4 log_alfabeam: ALFABEAM 5 9.717040466200302 22.976440407764976 2011-Feb-03 00:28:09 LOG4 log_alfabeam: ALFABEAM 6 9.710274586308657 22.926106470249987 2011-Feb-03 00:28:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 103400020 2011-Feb-03 00:28:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Feb-03 00:28:10 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2011-Feb-03 00:28:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 00:28:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Feb-03 00:28:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:28:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:28:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:28:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2011-Feb-03 00:28:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16091.00 2011-Feb-03 00:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.509 (still bad) 2011-Feb-03 00:28:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 00:28:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.500 (still bad) 2011-Feb-03 00:28:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 00:28:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.293 1.452 1.439 1.286 2011-Feb-03 00:28:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.351 1.259 1.279 1.500 2011-Feb-03 00:28:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.294 1.198 1.253 1.391 2011-Feb-03 00:28:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.481 0.036 1.260 0.042 2011-Feb-03 00:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.502 (still bad) 2011-Feb-03 00:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.502 (still bad) 2011-Feb-03 00:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.500 (still bad) 2011-Feb-03 00:28:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 00:28:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Feb-03 00:28:21 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2011-Feb-03 00:28:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Feb-03 00:28:21 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2011-Feb-03 00:28:21 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2011-Feb-03 00:28:21 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2011-Feb-03 00:28:21 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2011-Feb-03 00:28:21 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Feb-03 00:28:21 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.09314 J 2011-Feb-03 00:28:21 LOG2 antvel: Computed apparent RA = 09:43:40.3 Dec = +22:49:42.8 2011-Feb-03 00:28:21 LOG2 antvel: Parameters to Doppler: Topocentric 16101 2011 34 0.0 2011-Feb-03 00:28:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Feb-03 00:28:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2011-Feb-03 00:28:21 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2011-Feb-03 00:28:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 00:28:21 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 00:28:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Feb-03 00:28:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:28:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2011-Feb-03 00:28:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Feb-03 00:28:21 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2011-Feb-03 00:28:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2011-Feb-03 00:28:21 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.889514 2011.0931408281999 18.999933 2011-Feb-03 00:28:21 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666663 22.883333333333344 2011-Feb-03 00:28:21 LOG4 log_alfabeam: ALFABEAM 1 9.709885422523802 22.833532510456138 2011-Feb-03 00:28:21 LOG4 log_alfabeam: ALFABEAM 2 9.716252601084900 22.790476881169216 2011-Feb-03 00:28:21 LOG4 log_alfabeam: ALFABEAM 3 9.723051175371445 22.839800963524887 2011-Feb-03 00:28:21 LOG4 log_alfabeam: ALFABEAM 4 9.723444674867235 22.933332711649545 2011-Feb-03 00:28:21 LOG4 log_alfabeam: ALFABEAM 5 9.717030363731364 22.976448433013939 2011-Feb-03 00:28:21 LOG4 log_alfabeam: ALFABEAM 6 9.710269985461219 22.925973767736977 2011-Feb-03 00:28:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 103400021 2011-Feb-03 00:28:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Feb-03 00:28:22 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2011-Feb-03 00:28:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 00:28:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Feb-03 00:28:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:28:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:28:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:28:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2011-Feb-03 00:28:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16103.00 2011-Feb-03 00:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.501 (still bad) 2011-Feb-03 00:28:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 00:28:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.500 (still bad) 2011-Feb-03 00:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.499 (still bad) 2011-Feb-03 00:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.501 (still bad) 2011-Feb-03 00:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.500 (still bad) 2011-Feb-03 00:28:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 00:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.498 (still bad) 2011-Feb-03 00:28:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Feb-03 00:28:33 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2011-Feb-03 00:28:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Feb-03 00:28:33 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2011-Feb-03 00:28:33 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2011-Feb-03 00:28:33 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2011-Feb-03 00:28:33 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2011-Feb-03 00:28:33 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Feb-03 00:28:33 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.09314 J 2011-Feb-03 00:28:33 LOG2 antvel: Computed apparent RA = 09:43:40.3 Dec = +22:49:42.8 2011-Feb-03 00:28:33 LOG2 antvel: Parameters to Doppler: Topocentric 16113 2011 34 0.0 2011-Feb-03 00:28:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Feb-03 00:28:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2011-Feb-03 00:28:33 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2011-Feb-03 00:28:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 00:28:33 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 00:28:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Feb-03 00:28:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:28:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2011-Feb-03 00:28:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Feb-03 00:28:33 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2011-Feb-03 00:28:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2011-Feb-03 00:28:33 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.892856 2011.0931412084569 18.999933 2011-Feb-03 00:28:33 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666663 22.883333333333340 2011-Feb-03 00:28:33 LOG4 log_alfabeam: ALFABEAM 1 9.709890799108070 22.833393072577994 2011-Feb-03 00:28:33 LOG4 log_alfabeam: ALFABEAM 2 9.716262538895085 22.790468909568183 2011-Feb-03 00:28:33 LOG4 log_alfabeam: ALFABEAM 3 9.723055859620963 22.839931285684290 2011-Feb-03 00:28:33 LOG4 log_alfabeam: ALFABEAM 4 9.723439250070259 22.933473031714364 2011-Feb-03 00:28:33 LOG4 log_alfabeam: ALFABEAM 5 9.717020200508225 22.976456294792808 2011-Feb-03 00:28:33 LOG4 log_alfabeam: ALFABEAM 6 9.710265371932023 22.925840183717561 2011-Feb-03 00:28:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 103400022 2011-Feb-03 00:28:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Feb-03 00:28:34 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2011-Feb-03 00:28:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 00:28:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Feb-03 00:28:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:28:34 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:28:34 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:28:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2011-Feb-03 00:28:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16115.00 2011-Feb-03 00:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.503 (still bad) 2011-Feb-03 00:28:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 00:28:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.502 (still bad) 2011-Feb-03 00:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.504 (still bad) 2011-Feb-03 00:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.502 (still bad) 2011-Feb-03 00:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.502 (still bad) 2011-Feb-03 00:28:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 00:28:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Feb-03 00:28:45 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2011-Feb-03 00:28:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Feb-03 00:28:45 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2011-Feb-03 00:28:45 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2011-Feb-03 00:28:45 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2011-Feb-03 00:28:45 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2011-Feb-03 00:28:45 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Feb-03 00:28:45 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.09314 J 2011-Feb-03 00:28:45 LOG2 antvel: Computed apparent RA = 09:43:40.3 Dec = +22:49:42.8 2011-Feb-03 00:28:45 LOG2 antvel: Parameters to Doppler: Topocentric 16125 2011 34 0.0 2011-Feb-03 00:28:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Feb-03 00:28:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2011-Feb-03 00:28:45 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2011-Feb-03 00:28:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 00:28:45 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 00:28:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Feb-03 00:28:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:28:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2011-Feb-03 00:28:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Feb-03 00:28:45 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2011-Feb-03 00:28:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2011-Feb-03 00:28:45 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.896198 2011.0931415887139 18.999933 2011-Feb-03 00:28:45 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666660 22.883333333333347 2011-Feb-03 00:28:45 LOG4 log_alfabeam: ALFABEAM 1 9.709896224408835 22.833252875723254 2011-Feb-03 00:28:45 LOG4 log_alfabeam: ALFABEAM 2 9.716272539568767 22.790461093416187 2011-Feb-03 00:28:45 LOG4 log_alfabeam: ALFABEAM 3 9.723060559078860 22.840062518734960 2011-Feb-03 00:28:45 LOG4 log_alfabeam: ALFABEAM 4 9.723433776017924 22.933614114774599 2011-Feb-03 00:28:45 LOG4 log_alfabeam: ALFABEAM 5 9.717009972894825 22.976463992043183 2011-Feb-03 00:28:45 LOG4 log_alfabeam: ALFABEAM 6 9.710260744343737 22.925705668880173 2011-Feb-03 00:28:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 103400023 2011-Feb-03 00:28:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Feb-03 00:28:46 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2011-Feb-03 00:28:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 00:28:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Feb-03 00:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.502 (still bad) 2011-Feb-03 00:28:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:28:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:28:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:28:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2011-Feb-03 00:28:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16127.00 2011-Feb-03 00:28:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 00:28:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.504 (still bad) 2011-Feb-03 00:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.505 (still bad) 2011-Feb-03 00:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.513 (still bad) 2011-Feb-03 00:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.504 (still bad) 2011-Feb-03 00:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.504 (still bad) 2011-Feb-03 00:28:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 00:28:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Feb-03 00:28:57 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2011-Feb-03 00:28:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Feb-03 00:28:57 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2011-Feb-03 00:28:57 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2011-Feb-03 00:28:57 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2011-Feb-03 00:28:57 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2011-Feb-03 00:28:57 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Feb-03 00:28:57 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Feb-03 00:28:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Feb-03 00:28:57 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2011-Feb-03 00:28:57 LOG3 CALCONTROL-caltrig: Software trigger 2011-Feb-03 00:28:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Feb-03 00:28:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Feb-03 00:28:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Feb-03 00:28:57 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2011-Feb-03 00:28:57 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2011-Feb-03 00:28:57 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2011-Feb-03 00:28:57 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Feb-03 00:28:57 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2011-Feb-03 00:28:57 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Feb-03 00:28:57 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.09314 J 2011-Feb-03 00:28:57 LOG2 antvel: Computed apparent RA = 09:43:40.3 Dec = +22:49:42.8 2011-Feb-03 00:28:57 LOG2 antvel: Parameters to Doppler: Topocentric 16137 2011 34 0.0 2011-Feb-03 00:28:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Feb-03 00:28:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2011-Feb-03 00:28:57 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2011-Feb-03 00:28:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 00:28:57 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 00:28:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Feb-03 00:28:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:28:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2011-Feb-03 00:28:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Feb-03 00:28:57 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2011-Feb-03 00:28:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2011-Feb-03 00:28:57 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.899541 2011.0931419689709 18.999933 2011-Feb-03 00:28:57 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 22.883333333333340 2011-Feb-03 00:28:57 LOG4 log_alfabeam: ALFABEAM 1 9.709901700682245 22.833111871260904 2011-Feb-03 00:28:57 LOG4 log_alfabeam: ALFABEAM 2 9.716282606744508 22.790453433822002 2011-Feb-03 00:28:57 LOG4 log_alfabeam: ALFABEAM 3 9.723065275177264 22.840194712090938 2011-Feb-03 00:28:57 LOG4 log_alfabeam: ALFABEAM 4 9.723428250432168 22.933756009739913 2011-Feb-03 00:28:57 LOG4 log_alfabeam: ALFABEAM 5 9.716999677170653 22.976471523437692 2011-Feb-03 00:28:57 LOG4 log_alfabeam: ALFABEAM 6 9.710256101304322 22.925570172671428 2011-Feb-03 00:28:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 103400024 2011-Feb-03 00:28:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Feb-03 00:28:58 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2011-Feb-03 00:28:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 00:28:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Feb-03 00:28:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:28:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:28:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.507 (still bad) 2011-Feb-03 00:28:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2011-Feb-03 00:28:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16139.00 2011-Feb-03 00:29:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 00:29:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.507 (still bad) 2011-Feb-03 00:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.143 (still bad) 2011-Feb-03 00:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.147 (still bad) 2011-Feb-03 00:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.144 (still bad) 2011-Feb-03 00:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.144 (still bad) 2011-Feb-03 00:29:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 00:29:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Feb-03 00:29:09 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2011-Feb-03 00:29:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Feb-03 00:29:09 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2011-Feb-03 00:29:09 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2011-Feb-03 00:29:09 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Feb-03 00:29:09 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2011-Feb-03 00:29:09 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Feb-03 00:29:09 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.09314 J 2011-Feb-03 00:29:09 LOG2 antvel: Computed apparent RA = 09:43:40.3 Dec = +22:49:42.8 2011-Feb-03 00:29:09 LOG2 antvel: Parameters to Doppler: Topocentric 16149 2011 34 0.0 2011-Feb-03 00:29:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Feb-03 00:29:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2011-Feb-03 00:29:09 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2011-Feb-03 00:29:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 00:29:09 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 00:29:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Feb-03 00:29:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:29:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2011-Feb-03 00:29:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Feb-03 00:29:09 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2011-Feb-03 00:29:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2011-Feb-03 00:29:09 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.902883 2011.0931423492279 18.999933 2011-Feb-03 00:29:09 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 22.883333333333344 2011-Feb-03 00:29:09 LOG4 log_alfabeam: ALFABEAM 1 9.709907225272154 22.832970137153108 2011-Feb-03 00:29:09 LOG4 log_alfabeam: ALFABEAM 2 9.716292735024563 22.790445938815036 2011-Feb-03 00:29:09 LOG4 log_alfabeam: ALFABEAM 3 9.723070005111945 22.840327796528740 2011-Feb-03 00:29:09 LOG4 log_alfabeam: ALFABEAM 4 9.723422675991403 22.933898638126639 2011-Feb-03 00:29:09 LOG4 log_alfabeam: ALFABEAM 5 9.716989318856697 22.976478880841242 2011-Feb-03 00:29:09 LOG4 log_alfabeam: ALFABEAM 6 9.710251445592679 22.925433766141687 2011-Feb-03 00:29:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 103400025 2011-Feb-03 00:29:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Feb-03 00:29:10 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2011-Feb-03 00:29:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 00:29:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Feb-03 00:29:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:29:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:29:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:29:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2011-Feb-03 00:29:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16151.00 2011-Feb-03 00:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.147 (still bad) 2011-Feb-03 00:29:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 00:29:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.110 (still bad) 2011-Feb-03 00:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.120 (still bad) 2011-Feb-03 00:29:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.035 < 0.75)! 2011-Feb-03 00:29:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 1.085 1.083 0.981 2011-Feb-03 00:29:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.995 0.923 0.939 1.110 2011-Feb-03 00:29:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.949 0.877 0.931 1.078 2011-Feb-03 00:29:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.087 0.035 0.926 0.042 2011-Feb-03 00:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.110 (still bad) 2011-Feb-03 00:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.110 (still bad) 2011-Feb-03 00:29:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 00:29:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Feb-03 00:29:21 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2011-Feb-03 00:29:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Feb-03 00:29:21 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2011-Feb-03 00:29:21 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2011-Feb-03 00:29:21 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Feb-03 00:29:21 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2011-Feb-03 00:29:21 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Feb-03 00:29:21 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.09314 J 2011-Feb-03 00:29:21 LOG2 antvel: Computed apparent RA = 09:43:40.3 Dec = +22:49:42.8 2011-Feb-03 00:29:21 LOG2 antvel: Parameters to Doppler: Topocentric 16161 2011 34 0.0 2011-Feb-03 00:29:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Feb-03 00:29:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2011-Feb-03 00:29:21 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2011-Feb-03 00:29:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 00:29:21 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 00:29:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Feb-03 00:29:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:29:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2011-Feb-03 00:29:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Feb-03 00:29:21 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2011-Feb-03 00:29:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2011-Feb-03 00:29:21 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.906226 2011.0931427294852 18.999933 2011-Feb-03 00:29:21 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666663 22.883333333333340 2011-Feb-03 00:29:21 LOG4 log_alfabeam: ALFABEAM 1 9.709912802114687 22.832827582123606 2011-Feb-03 00:29:21 LOG4 log_alfabeam: ALFABEAM 2 9.716302931102959 22.790438607429945 2011-Feb-03 00:29:21 LOG4 log_alfabeam: ALFABEAM 3 9.723074751728802 22.840461861689757 2011-Feb-03 00:29:21 LOG4 log_alfabeam: ALFABEAM 4 9.723417048722371 22.934042091757050 2011-Feb-03 00:29:21 LOG4 log_alfabeam: ALFABEAM 5 9.716978891107669 22.976486064950748 2011-Feb-03 00:29:21 LOG4 log_alfabeam: ALFABEAM 6 9.710246774426055 22.925296357511446 2011-Feb-03 00:29:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 103400026 2011-Feb-03 00:29:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Feb-03 00:29:22 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2011-Feb-03 00:29:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 00:29:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Feb-03 00:29:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:29:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:29:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:29:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2011-Feb-03 00:29:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16163.00 2011-Feb-03 00:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.110 (still bad) 2011-Feb-03 00:29:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 00:29:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.107 (still bad) 2011-Feb-03 00:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.116 (still bad) 2011-Feb-03 00:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.108 (still bad) 2011-Feb-03 00:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.108 (still bad) 2011-Feb-03 00:29:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 00:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.110 (still bad) 2011-Feb-03 00:29:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Feb-03 00:29:33 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2011-Feb-03 00:29:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Feb-03 00:29:33 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2011-Feb-03 00:29:33 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2011-Feb-03 00:29:33 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2011-Feb-03 00:29:33 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2011-Feb-03 00:29:33 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Feb-03 00:29:33 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.09314 J 2011-Feb-03 00:29:33 LOG2 antvel: Computed apparent RA = 09:43:40.3 Dec = +22:49:42.8 2011-Feb-03 00:29:33 LOG2 antvel: Parameters to Doppler: Topocentric 16173 2011 34 0.0 2011-Feb-03 00:29:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Feb-03 00:29:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2011-Feb-03 00:29:33 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2011-Feb-03 00:29:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 00:29:33 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 00:29:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Feb-03 00:29:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:29:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2011-Feb-03 00:29:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Feb-03 00:29:33 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2011-Feb-03 00:29:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2011-Feb-03 00:29:33 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.909568 2011.0931431097422 18.999933 2011-Feb-03 00:29:33 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666663 22.883333333333333 2011-Feb-03 00:29:33 LOG4 log_alfabeam: ALFABEAM 1 9.709918428512843 22.832684284946307 2011-Feb-03 00:29:33 LOG4 log_alfabeam: ALFABEAM 2 9.716313189519854 22.790431447644746 2011-Feb-03 00:29:33 LOG4 log_alfabeam: ALFABEAM 3 9.723079512201346 22.840596837494086 2011-Feb-03 00:29:33 LOG4 log_alfabeam: ALFABEAM 4 9.723411371344756 22.934186291330210 2011-Feb-03 00:29:33 LOG4 log_alfabeam: ALFABEAM 5 9.716968399508273 22.976493067686764 2011-Feb-03 00:29:33 LOG4 log_alfabeam: ALFABEAM 6 9.710242090604806 22.925158018710320 2011-Feb-03 00:29:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 103400027 2011-Feb-03 00:29:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Feb-03 00:29:34 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2011-Feb-03 00:29:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 00:29:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Feb-03 00:29:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:29:34 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:29:34 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:29:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2011-Feb-03 00:29:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16175.00 2011-Feb-03 00:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.110 (still bad) 2011-Feb-03 00:29:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 00:29:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.104 (still bad) 2011-Feb-03 00:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.110 (still bad) 2011-Feb-03 00:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.103 (still bad) 2011-Feb-03 00:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.102 (still bad) 2011-Feb-03 00:29:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 00:29:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Feb-03 00:29:45 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2011-Feb-03 00:29:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Feb-03 00:29:45 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2011-Feb-03 00:29:45 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2011-Feb-03 00:29:45 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2011-Feb-03 00:29:45 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2011-Feb-03 00:29:45 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Feb-03 00:29:45 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.09314 J 2011-Feb-03 00:29:45 LOG2 antvel: Computed apparent RA = 09:43:40.3 Dec = +22:49:42.8 2011-Feb-03 00:29:45 LOG2 antvel: Parameters to Doppler: Topocentric 16185 2011 34 0.0 2011-Feb-03 00:29:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Feb-03 00:29:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2011-Feb-03 00:29:45 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2011-Feb-03 00:29:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 00:29:45 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 00:29:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Feb-03 00:29:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:29:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2011-Feb-03 00:29:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Feb-03 00:29:45 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2011-Feb-03 00:29:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2011-Feb-03 00:29:45 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.912911 2011.0931434899992 18.999933 2011-Feb-03 00:29:45 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 22.883333333333347 2011-Feb-03 00:29:45 LOG4 log_alfabeam: ALFABEAM 1 9.709924108483358 22.832540153292829 2011-Feb-03 00:29:45 LOG4 log_alfabeam: ALFABEAM 2 9.716323517062374 22.790424458842953 2011-Feb-03 00:29:45 LOG4 log_alfabeam: ALFABEAM 3 9.723084289389641 22.840732814982427 2011-Feb-03 00:29:45 LOG4 log_alfabeam: ALFABEAM 4 9.723405639803792 22.934331329724589 2011-Feb-03 00:29:45 LOG4 log_alfabeam: ALFABEAM 5 9.716957837118024 22.976499889378356 2011-Feb-03 00:29:45 LOG4 log_alfabeam: ALFABEAM 6 9.710237391334127 22.925018656533588 2011-Feb-03 00:29:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 103400028 2011-Feb-03 00:29:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Feb-03 00:29:46 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2011-Feb-03 00:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.104 (still bad) 2011-Feb-03 00:29:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 00:29:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Feb-03 00:29:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:29:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:29:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:29:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2011-Feb-03 00:29:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16187.00 2011-Feb-03 00:29:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 00:29:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.035 and 1.104 (still bad) 2011-Feb-03 00:29:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.102 (still bad) 2011-Feb-03 00:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.108 (still bad) 2011-Feb-03 00:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.102 (still bad) 2011-Feb-03 00:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.102 (still bad) 2011-Feb-03 00:29:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 00:29:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Feb-03 00:29:57 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2011-Feb-03 00:29:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Feb-03 00:29:57 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2011-Feb-03 00:29:57 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2011-Feb-03 00:29:57 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2011-Feb-03 00:29:57 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2011-Feb-03 00:29:57 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Feb-03 00:29:57 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.09314 J 2011-Feb-03 00:29:57 LOG2 antvel: Computed apparent RA = 09:43:40.3 Dec = +22:49:42.8 2011-Feb-03 00:29:57 LOG2 antvel: Parameters to Doppler: Topocentric 16197 2011 34 0.0 2011-Feb-03 00:29:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Feb-03 00:29:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2011-Feb-03 00:29:57 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2011-Feb-03 00:29:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 00:29:57 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 00:29:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Feb-03 00:29:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:29:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2011-Feb-03 00:29:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Feb-03 00:29:57 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2011-Feb-03 00:29:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2011-Feb-03 00:29:57 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.916253 2011.0931438702562 18.999933 2011-Feb-03 00:29:57 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 22.883333333333333 2011-Feb-03 00:29:57 LOG4 log_alfabeam: ALFABEAM 1 9.709929839287570 22.832395266762923 2011-Feb-03 00:29:57 LOG4 log_alfabeam: ALFABEAM 2 9.716333908207455 22.790417648949010 2011-Feb-03 00:29:57 LOG4 log_alfabeam: ALFABEAM 3 9.723089080444643 22.840869723202033 2011-Feb-03 00:29:57 LOG4 log_alfabeam: ALFABEAM 4 9.723399856861308 22.934477126807604 2011-Feb-03 00:29:57 LOG4 log_alfabeam: ALFABEAM 5 9.716947209586520 22.976506522003859 2011-Feb-03 00:29:57 LOG4 log_alfabeam: ALFABEAM 6 9.710232679436132 22.924878343806849 2011-Feb-03 00:29:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 103400029 2011-Feb-03 00:29:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Feb-03 00:29:58 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2011-Feb-03 00:29:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Feb-03 00:29:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 00:29:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:29:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:29:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.102 (still bad) 2011-Feb-03 00:29:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2011-Feb-03 00:29:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16199.00 2011-Feb-03 00:30:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 00:30:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.102 (still bad) 2011-Feb-03 00:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.103 (still bad) 2011-Feb-03 00:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.107 (still bad) 2011-Feb-03 00:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.103 (still bad) 2011-Feb-03 00:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.102 (still bad) 2011-Feb-03 00:30:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 00:30:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Feb-03 00:30:09 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2011-Feb-03 00:30:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Feb-03 00:30:09 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2011-Feb-03 00:30:09 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2011-Feb-03 00:30:09 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2011-Feb-03 00:30:09 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2011-Feb-03 00:30:09 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Feb-03 00:30:09 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.09314 J 2011-Feb-03 00:30:09 LOG2 antvel: Computed apparent RA = 09:43:40.3 Dec = +22:49:42.8 2011-Feb-03 00:30:09 LOG2 antvel: Parameters to Doppler: Topocentric 16209 2011 34 0.0 2011-Feb-03 00:30:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Feb-03 00:30:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2011-Feb-03 00:30:09 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2011-Feb-03 00:30:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 00:30:09 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 00:30:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Feb-03 00:30:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:30:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2011-Feb-03 00:30:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Feb-03 00:30:09 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2011-Feb-03 00:30:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2011-Feb-03 00:30:09 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.919596 2011.0931442505132 18.999933 2011-Feb-03 00:30:09 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666670 22.883333333333333 2011-Feb-03 00:30:09 LOG4 log_alfabeam: ALFABEAM 1 9.709935625025073 22.832249531959075 2011-Feb-03 00:30:09 LOG4 log_alfabeam: ALFABEAM 2 9.716344369837266 22.790411017710710 2011-Feb-03 00:30:09 LOG4 log_alfabeam: ALFABEAM 3 9.723093888240271 22.841007654625653 2011-Feb-03 00:30:09 LOG4 log_alfabeam: ALFABEAM 4 9.723394018378727 22.934623776530923 2011-Feb-03 00:30:09 LOG4 log_alfabeam: ALFABEAM 5 9.716936509876062 22.976512965508363 2011-Feb-03 00:30:09 LOG4 log_alfabeam: ALFABEAM 6 9.710227952104319 22.924736985867174 2011-Feb-03 00:30:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 103400030 2011-Feb-03 00:30:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Feb-03 00:30:10 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2011-Feb-03 00:30:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Feb-03 00:30:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 00:30:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:30:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:30:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:30:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2011-Feb-03 00:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.102 (still bad) 2011-Feb-03 00:30:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16211.00 2011-Feb-03 00:30:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 00:30:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.102 (still bad) 2011-Feb-03 00:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.106 (still bad) 2011-Feb-03 00:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 00:30:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 00:30:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.941 1.073 1.080 0.967 2011-Feb-03 00:30:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.994 0.911 0.935 1.106 2011-Feb-03 00:30:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.949 0.884 0.919 1.064 2011-Feb-03 00:30:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 0.036 0.935 0.043 2011-Feb-03 00:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.106 (still bad) 2011-Feb-03 00:30:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 00:30:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Feb-03 00:30:21 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2011-Feb-03 00:30:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Feb-03 00:30:21 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2011-Feb-03 00:30:21 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2011-Feb-03 00:30:21 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Feb-03 00:30:21 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Feb-03 00:30:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Feb-03 00:30:21 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2011-Feb-03 00:30:21 LOG3 CALCONTROL-caltrig: Software trigger 2011-Feb-03 00:30:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Feb-03 00:30:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Feb-03 00:30:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Feb-03 00:30:21 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2011-Feb-03 00:30:21 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2011-Feb-03 00:30:21 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2011-Feb-03 00:30:21 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2011-Feb-03 00:30:21 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Feb-03 00:30:21 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.09314 J 2011-Feb-03 00:30:21 LOG2 antvel: Computed apparent RA = 09:43:40.3 Dec = +22:49:42.8 2011-Feb-03 00:30:21 LOG2 antvel: Parameters to Doppler: Topocentric 16221 2011 34 0.0 2011-Feb-03 00:30:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Feb-03 00:30:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2011-Feb-03 00:30:21 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2011-Feb-03 00:30:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 00:30:21 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 00:30:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Feb-03 00:30:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:30:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2011-Feb-03 00:30:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Feb-03 00:30:21 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2011-Feb-03 00:30:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2011-Feb-03 00:30:21 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.922938 2011.0931446307704 18.999933 2011-Feb-03 00:30:21 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 22.883333333333340 2011-Feb-03 00:30:21 LOG4 log_alfabeam: ALFABEAM 1 9.709941462914667 22.832103029321523 2011-Feb-03 00:30:21 LOG4 log_alfabeam: ALFABEAM 2 9.716354896364324 22.790404572996852 2011-Feb-03 00:30:21 LOG4 log_alfabeam: ALFABEAM 3 9.723098709904594 22.841146537411138 2011-Feb-03 00:30:21 LOG4 log_alfabeam: ALFABEAM 4 9.723388127160874 22.934771197915680 2011-Feb-03 00:30:21 LOG4 log_alfabeam: ALFABEAM 5 9.716925743702362 22.976519211930416 2011-Feb-03 00:30:21 LOG4 log_alfabeam: ALFABEAM 6 9.710223212182882 22.924594656453216 2011-Feb-03 00:30:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 103400031 2011-Feb-03 00:30:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Feb-03 00:30:22 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2011-Feb-03 00:30:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 00:30:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2011-Feb-03 00:30:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:30:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:30:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:30:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2011-Feb-03 00:30:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16223.00 2011-Feb-03 00:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.106 (still bad) 2011-Feb-03 00:30:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 00:30:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.551 (still bad) 2011-Feb-03 00:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.550 (still bad) 2011-Feb-03 00:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.559 (still bad) 2011-Feb-03 00:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.550 (still bad) 2011-Feb-03 00:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.550 (still bad) 2011-Feb-03 00:30:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 00:30:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Feb-03 00:30:33 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2011-Feb-03 00:30:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Feb-03 00:30:33 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2011-Feb-03 00:30:33 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2011-Feb-03 00:30:33 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2011-Feb-03 00:30:33 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2011-Feb-03 00:30:33 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Feb-03 00:30:33 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.09315 J 2011-Feb-03 00:30:33 LOG2 antvel: Computed apparent RA = 09:43:40.3 Dec = +22:49:42.8 2011-Feb-03 00:30:33 LOG2 antvel: Parameters to Doppler: Topocentric 16233 2011 34 0.0 2011-Feb-03 00:30:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Feb-03 00:30:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2011-Feb-03 00:30:33 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2011-Feb-03 00:30:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 00:30:33 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 00:30:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Feb-03 00:30:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:30:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2011-Feb-03 00:30:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Feb-03 00:30:33 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2011-Feb-03 00:30:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2011-Feb-03 00:30:33 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.926281 2011.0931450110274 18.999933 2011-Feb-03 00:30:33 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 22.883333333333340 2011-Feb-03 00:30:33 LOG4 log_alfabeam: ALFABEAM 1 9.709947357141155 22.831955664366259 2011-Feb-03 00:30:33 LOG4 log_alfabeam: ALFABEAM 2 9.716365494767853 22.790398314935494 2011-Feb-03 00:30:33 LOG4 log_alfabeam: ALFABEAM 3 9.723103548325103 22.841286465496765 2011-Feb-03 00:30:33 LOG4 log_alfabeam: ALFABEAM 4 9.723382178983018 22.934919486003956 2011-Feb-03 00:30:33 LOG4 log_alfabeam: ALFABEAM 5 9.716914903928489 22.976525260814153 2011-Feb-03 00:30:33 LOG4 log_alfabeam: ALFABEAM 6 9.710218456854003 22.924451259409953 2011-Feb-03 00:30:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 103400032 2011-Feb-03 00:30:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Feb-03 00:30:34 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2011-Feb-03 00:30:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 00:30:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2011-Feb-03 00:30:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:30:34 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:30:34 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:30:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2011-Feb-03 00:30:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16235.00 2011-Feb-03 00:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.554 (still bad) 2011-Feb-03 00:30:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 00:30:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.505 (still bad) 2011-Feb-03 00:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.505 (still bad) 2011-Feb-03 00:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.514 (still bad) 2011-Feb-03 00:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.505 (still bad) 2011-Feb-03 00:30:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 00:30:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Feb-03 00:30:45 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2011-Feb-03 00:30:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Feb-03 00:30:45 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2011-Feb-03 00:30:45 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2011-Feb-03 00:30:45 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2011-Feb-03 00:30:45 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2011-Feb-03 00:30:45 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Feb-03 00:30:45 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.09315 J 2011-Feb-03 00:30:45 LOG2 antvel: Computed apparent RA = 09:43:40.3 Dec = +22:49:42.8 2011-Feb-03 00:30:45 LOG2 antvel: Parameters to Doppler: Topocentric 16245 2011 34 0.0 2011-Feb-03 00:30:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Feb-03 00:30:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2011-Feb-03 00:30:45 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2011-Feb-03 00:30:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 00:30:45 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 00:30:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Feb-03 00:30:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:30:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2011-Feb-03 00:30:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Feb-03 00:30:45 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2011-Feb-03 00:30:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2011-Feb-03 00:30:45 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.929623 2011.0931453912845 18.999933 2011-Feb-03 00:30:45 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666670 22.883333333333333 2011-Feb-03 00:30:45 LOG4 log_alfabeam: ALFABEAM 1 9.709953304879951 22.831807518388928 2011-Feb-03 00:30:45 LOG4 log_alfabeam: ALFABEAM 2 9.716376159394777 22.790392251337526 2011-Feb-03 00:30:45 LOG4 log_alfabeam: ALFABEAM 3 9.723108400606632 22.841427366133946 2011-Feb-03 00:30:45 LOG4 log_alfabeam: ALFABEAM 4 9.723376176693872 22.935068558955550 2011-Feb-03 00:30:45 LOG4 log_alfabeam: ALFABEAM 5 9.716903996337519 22.976531104260665 2011-Feb-03 00:30:45 LOG4 log_alfabeam: ALFABEAM 6 9.710213688984270 22.924306869406621 2011-Feb-03 00:30:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 103400033 2011-Feb-03 00:30:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Feb-03 00:30:46 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2011-Feb-03 00:30:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 00:30:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2011-Feb-03 00:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.506 (still bad) 2011-Feb-03 00:30:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:30:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:30:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:30:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2011-Feb-03 00:30:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16247.00 2011-Feb-03 00:30:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 00:30:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.501 (still bad) 2011-Feb-03 00:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.502 (still bad) 2011-Feb-03 00:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.510 (still bad) 2011-Feb-03 00:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.501 (still bad) 2011-Feb-03 00:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.502 (still bad) 2011-Feb-03 00:30:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 00:30:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Feb-03 00:30:57 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2011-Feb-03 00:30:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Feb-03 00:30:57 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2011-Feb-03 00:30:57 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2011-Feb-03 00:30:57 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2011-Feb-03 00:30:57 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2011-Feb-03 00:30:57 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Feb-03 00:30:57 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.09315 J 2011-Feb-03 00:30:57 LOG2 antvel: Computed apparent RA = 09:43:40.3 Dec = +22:49:42.8 2011-Feb-03 00:30:57 LOG2 antvel: Parameters to Doppler: Topocentric 16257 2011 34 0.0 2011-Feb-03 00:30:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Feb-03 00:30:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2011-Feb-03 00:30:57 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2011-Feb-03 00:30:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 00:30:57 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 00:30:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Feb-03 00:30:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:30:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2011-Feb-03 00:30:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Feb-03 00:30:57 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2011-Feb-03 00:30:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2011-Feb-03 00:30:57 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.932965 2011.0931457715415 18.999933 2011-Feb-03 00:30:57 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 22.883333333333333 2011-Feb-03 00:30:57 LOG4 log_alfabeam: ALFABEAM 1 9.709959308598565 22.831658540504318 2011-Feb-03 00:30:57 LOG4 log_alfabeam: ALFABEAM 2 9.716386894100761 22.790386384453850 2011-Feb-03 00:30:57 LOG4 log_alfabeam: ALFABEAM 3 9.723113268191106 22.841569292139123 2011-Feb-03 00:30:57 LOG4 log_alfabeam: ALFABEAM 4 9.723370117801570 22.935218467938480 2011-Feb-03 00:30:57 LOG4 log_alfabeam: ALFABEAM 5 9.716893016987271 22.976536739740844 2011-Feb-03 00:30:57 LOG4 log_alfabeam: ALFABEAM 6 9.710208907177869 22.924161432437092 2011-Feb-03 00:30:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 103400034 2011-Feb-03 00:30:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Feb-03 00:30:58 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2011-Feb-03 00:30:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 00:30:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2011-Feb-03 00:30:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:30:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:30:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.501 (still bad) 2011-Feb-03 00:30:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2011-Feb-03 00:30:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16259.00 2011-Feb-03 00:31:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 00:31:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.495 (still bad) 2011-Feb-03 00:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.495 (still bad) 2011-Feb-03 00:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.502 (still bad) 2011-Feb-03 00:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.494 (still bad) 2011-Feb-03 00:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.493 (still bad) 2011-Feb-03 00:31:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 00:31:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Feb-03 00:31:09 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2011-Feb-03 00:31:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Feb-03 00:31:09 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2011-Feb-03 00:31:09 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2011-Feb-03 00:31:09 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2011-Feb-03 00:31:09 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2011-Feb-03 00:31:09 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Feb-03 00:31:09 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.09315 J 2011-Feb-03 00:31:09 LOG2 antvel: Computed apparent RA = 09:43:40.3 Dec = +22:49:42.8 2011-Feb-03 00:31:09 LOG2 antvel: Parameters to Doppler: Topocentric 16269 2011 34 0.0 2011-Feb-03 00:31:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Feb-03 00:31:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2011-Feb-03 00:31:09 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2011-Feb-03 00:31:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 00:31:09 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 00:31:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Feb-03 00:31:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:31:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2011-Feb-03 00:31:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Feb-03 00:31:09 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2011-Feb-03 00:31:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2011-Feb-03 00:31:09 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.936308 2011.0931461517985 18.999933 2011-Feb-03 00:31:09 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666663 22.883333333333344 2011-Feb-03 00:31:09 LOG4 log_alfabeam: ALFABEAM 1 9.709965370842788 22.831508678770785 2011-Feb-03 00:31:09 LOG4 log_alfabeam: ALFABEAM 2 9.716397702833756 22.790380716858213 2011-Feb-03 00:31:09 LOG4 log_alfabeam: ALFABEAM 3 9.723118152536108 22.841712297705616 2011-Feb-03 00:31:09 LOG4 log_alfabeam: ALFABEAM 4 9.723363999735156 22.935369265181482 2011-Feb-03 00:31:09 LOG4 log_alfabeam: ALFABEAM 5 9.716881961841199 22.976542164384899 2011-Feb-03 00:31:09 LOG4 log_alfabeam: ALFABEAM 6 9.710204110025391 22.924014893091854 2011-Feb-03 00:31:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 103400035 2011-Feb-03 00:31:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Feb-03 00:31:10 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2011-Feb-03 00:31:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 00:31:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2011-Feb-03 00:31:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:31:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:31:10 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:31:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2011-Feb-03 00:31:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16271.00 2011-Feb-03 00:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.494 (still bad) 2011-Feb-03 00:31:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 00:31:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.496 (still bad) 2011-Feb-03 00:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.498 (still bad) 2011-Feb-03 00:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.497 (still bad) 2011-Feb-03 00:31:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 00:31:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.294 1.446 1.437 1.286 2011-Feb-03 00:31:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.349 1.250 1.276 1.496 2011-Feb-03 00:31:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.289 1.194 1.239 1.377 2011-Feb-03 00:31:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.485 0.036 1.265 0.043 2011-Feb-03 00:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.496 (still bad) 2011-Feb-03 00:31:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 00:31:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Feb-03 00:31:21 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2011-Feb-03 00:31:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Feb-03 00:31:21 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2011-Feb-03 00:31:21 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2011-Feb-03 00:31:21 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2011-Feb-03 00:31:21 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2011-Feb-03 00:31:21 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Feb-03 00:31:21 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.09315 J 2011-Feb-03 00:31:21 LOG2 antvel: Computed apparent RA = 09:43:40.3 Dec = +22:49:42.8 2011-Feb-03 00:31:21 LOG2 antvel: Parameters to Doppler: Topocentric 16281 2011 34 0.0 2011-Feb-03 00:31:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Feb-03 00:31:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2011-Feb-03 00:31:21 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2011-Feb-03 00:31:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 00:31:21 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 00:31:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Feb-03 00:31:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:31:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2011-Feb-03 00:31:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Feb-03 00:31:21 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2011-Feb-03 00:31:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2011-Feb-03 00:31:21 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.939650 2011.0931465320557 18.999933 2011-Feb-03 00:31:21 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666660 22.883333333333333 2011-Feb-03 00:31:21 LOG4 log_alfabeam: ALFABEAM 1 9.709971488721216 22.831358015795821 2011-Feb-03 00:31:21 LOG4 log_alfabeam: ALFABEAM 2 9.716408579839960 22.790375256270270 2011-Feb-03 00:31:21 LOG4 log_alfabeam: ALFABEAM 3 9.723123050710946 22.841856308692247 2011-Feb-03 00:31:21 LOG4 log_alfabeam: ALFABEAM 4 9.723357825410879 22.935520867523511 2011-Feb-03 00:31:21 LOG4 log_alfabeam: ALFABEAM 5 9.716870836785759 22.976547370392421 2011-Feb-03 00:31:21 LOG4 log_alfabeam: ALFABEAM 6 9.710199300427611 22.923867327469790 2011-Feb-03 00:31:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 103400036 2011-Feb-03 00:31:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Feb-03 00:31:22 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2011-Feb-03 00:31:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 00:31:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2011-Feb-03 00:31:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:31:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:31:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:31:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2011-Feb-03 00:31:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16283.00 2011-Feb-03 00:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.496 (still bad) 2011-Feb-03 00:31:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 00:31:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.499 (still bad) 2011-Feb-03 00:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.501 (still bad) 2011-Feb-03 00:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.502 (still bad) 2011-Feb-03 00:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.498 (still bad) 2011-Feb-03 00:31:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 00:31:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Feb-03 00:31:33 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2011-Feb-03 00:31:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Feb-03 00:31:33 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2011-Feb-03 00:31:33 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2011-Feb-03 00:31:33 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2011-Feb-03 00:31:33 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2011-Feb-03 00:31:33 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Feb-03 00:31:33 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.09315 J 2011-Feb-03 00:31:33 LOG2 antvel: Computed apparent RA = 09:43:40.3 Dec = +22:49:42.8 2011-Feb-03 00:31:33 LOG2 antvel: Parameters to Doppler: Topocentric 16293 2011 34 0.0 2011-Feb-03 00:31:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Feb-03 00:31:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2011-Feb-03 00:31:33 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2011-Feb-03 00:31:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 00:31:33 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 00:31:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Feb-03 00:31:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:31:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2011-Feb-03 00:31:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2011-Feb-03 00:31:33 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2011-Feb-03 00:31:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2011-Feb-03 00:31:33 LOG5 log_alfabeam: Parameters: 9.7166666666666668 22.883333333333333 8.942993 2011.0931469123127 18.999933 2011-Feb-03 00:31:33 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 22.883333333333333 2011-Feb-03 00:31:33 LOG4 log_alfabeam: ALFABEAM 1 9.709977666642429 22.831206454302553 2011-Feb-03 00:31:33 LOG4 log_alfabeam: ALFABEAM 2 9.716419532350208 22.790370003844242 2011-Feb-03 00:31:33 LOG4 log_alfabeam: ALFABEAM 3 9.723127965635463 22.842001422854374 2011-Feb-03 00:31:33 LOG4 log_alfabeam: ALFABEAM 4 9.723351590377701 22.935673372809084 2011-Feb-03 00:31:33 LOG4 log_alfabeam: ALFABEAM 5 9.716859634426767 22.976552356226271 2011-Feb-03 00:31:33 LOG4 log_alfabeam: ALFABEAM 6 9.710194475540344 22.923718635531365 2011-Feb-03 00:31:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 103400037 2011-Feb-03 00:31:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2011-Feb-03 00:31:34 LOG5 begin_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2011-Feb-03 00:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.500 (still bad) 2011-Feb-03 00:31:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 00:31:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2011-Feb-03 00:31:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:31:34 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:31:34 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:31:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2011-Feb-03 00:31:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16295.00 2011-Feb-03 00:31:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 00:31:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.500 (still bad) 2011-Feb-03 00:31:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.503 (still bad) 2011-Feb-03 00:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.506 (still bad) 2011-Feb-03 00:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.505 (still bad) 2011-Feb-03 00:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.504 (still bad) 2011-Feb-03 00:31:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 00:31:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2011-Feb-03 00:31:45 LOG5 end_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2011-Feb-03 00:31:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2011-Feb-03 00:31:45 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2011-Feb-03 00:31:45 INFO2 smartfreq: Switching off CAL 2011-Feb-03 00:31:45 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Feb-03 00:31:45 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Feb-03 00:31:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Feb-03 00:31:45 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2011-Feb-03 00:31:45 LOG3 CALCONTROL-caltrig: Software trigger 2011-Feb-03 00:31:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Feb-03 00:31:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Feb-03 00:31:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Feb-03 00:31:45 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2011-Feb-03 00:31:45 INFO3 restore_frequencies: Restoring original frequencies 2011-Feb-03 00:31:45 LOG5 antvel: Calling 'antvel 94300.000000 225300.000000 J Topocentric 0' 2011-Feb-03 00:31:45 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.09315 J 2011-Feb-03 00:31:45 LOG2 antvel: Computed apparent RA = 09:43:40.3 Dec = +22:49:42.8 2011-Feb-03 00:31:45 LOG2 antvel: Parameters to Doppler: Topocentric 16305 2011 34 0.0 2011-Feb-03 00:31:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2011-Feb-03 00:31:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2011-Feb-03 00:31:45 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2011-Feb-03 00:31:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 00:31:45 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 00:31:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2011-Feb-03 00:31:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:31:45 STOP finish_task: Finishing task 'smart frequency switching' 2011-Feb-03 00:31:45 LOG5 finish_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2011-Feb-03 00:31:45 DONE finish_task: DONE finished pattern: smart frequency switching 2011-Feb-03 00:31:45 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Feb-03 00:31:45 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2011-Feb-03 00:31:45 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2011-Feb-03 00:31:45 COMMAND run_command_line: EXECUTING command 28: 'LOAD ages_mock.conf' 2011-Feb-03 00:31:45 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2011-Feb-03 00:31:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2011-Feb-03 00:31:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:31:45 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:31:45 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:31:46 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Feb-03 00:31:46 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2011-Feb-03 00:31:46 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock.conf' 2011-Feb-03 00:31:46 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2011-Feb-03 00:31:46 LOG2 CIMA-antvel: Precessing RA = 09:43:00.0 Dec = +22:53:00.0 Epoch = 2011.09315 J 2011-Feb-03 00:31:46 LOG2 CIMA-antvel: Computed apparent RA = 09:43:40.3 Dec = +22:49:42.8 2011-Feb-03 00:31:46 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 16305 2011 34 0.0 2011-Feb-03 00:31:46 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2011-Feb-03 00:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.505 (still bad) 2011-Feb-03 00:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2011-Feb-03 00:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2011-Feb-03 00:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2011-Feb-03 00:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2011-Feb-03 00:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2011-Feb-03 00:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2011-Feb-03 00:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2011-Feb-03 00:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2011-Feb-03 00:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2011-Feb-03 00:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2011-Feb-03 00:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2011-Feb-03 00:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2011-Feb-03 00:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2011-Feb-03 00:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2011-Feb-03 00:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2011-Feb-03 00:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2011-Feb-03 00:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2011-Feb-03 00:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2011-Feb-03 00:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2011-Feb-03 00:31:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2011-Feb-03 00:31:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled1) "1" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled2) "0" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards1) "both" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards2) "both" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode1) "spectra" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode2) "spectra" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg1) "2-pol" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg2) "2-pol" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits1) "32" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits2) "32" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor1) "1" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor2) "1" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset1) "0.0" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset2) "0.0" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags1) "8192" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags2) "8192" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs1) "1000.0" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs2) "1000.0" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad1) "1" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad2) "0" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors1) "13" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors2) "0" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors1) "0" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors2) "0" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors1) "0" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors2) "0" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors1) "0" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors2) "0" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype1) "fits" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype2) "fits" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2011-Feb-03 00:31:48 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2011-Feb-03 00:31:49 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2011-Feb-03 00:31:49 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Feb-03 00:31:49 BEGIN begin_task: Starting task 'configuring IF/LO path' 2011-Feb-03 00:31:49 LOG5 begin_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2011-Feb-03 00:31:49 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2011-Feb-03 00:31:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2011-Feb-03 00:31:49 LOG1 config_iflo: Receiver ALFA already selected 2011-Feb-03 00:31:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Feb-03 00:31:49 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Feb-03 00:31:49 START begin_task: Starting task 'waiting on command to ALFA' 2011-Feb-03 00:31:49 LOG5 begin_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2011-Feb-03 00:31:49 LOG4 got_alfamon: From ALFAMON: ACK 2011-Feb-03 00:31:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Feb-03 00:31:49 LOG5 end_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2011-Feb-03 00:31:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Feb-03 00:31:49 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Feb-03 00:31:49 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2011-Feb-03 00:31:49 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2011-Feb-03 00:31:49 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2011-Feb-03 00:31:49 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2011-Feb-03 00:31:49 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2011-Feb-03 00:31:49 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2011-Feb-03 00:31:49 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2011-Feb-03 00:31:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2011-Feb-03 00:31:49 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2011-Feb-03 00:31:49 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2011-Feb-03 00:31:49 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2011-Feb-03 00:31:49 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2011-Feb-03 00:31:49 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2011-Feb-03 00:31:49 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2011-Feb-03 00:31:49 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2011-Feb-03 00:31:49 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2011-Feb-03 00:31:49 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2011-Feb-03 00:31:49 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2011-Feb-03 00:31:49 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2011-Feb-03 00:31:49 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2011-Feb-03 00:31:49 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2011-Feb-03 00:31:49 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2011-Feb-03 00:31:49 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2011-Feb-03 00:31:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:31:49 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2011-Feb-03 00:31:49 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2011-Feb-03 00:31:49 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2011-Feb-03 00:31:49 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2011-Feb-03 00:31:49 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2011-Feb-03 00:31:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2011-Feb-03 00:31:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 00:31:49 START begin_task: Starting task 'waiting on configuring IF/LO path' 2011-Feb-03 00:31:49 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2011-Feb-03 00:31:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2011-Feb-03 00:31:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2011-Feb-03 00:31:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:31:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 00:31:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:31:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:31:49 LOG4 got_cormsg: From DATATAKING: vw% DONE 2011-Feb-03 00:31:49 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2011-Feb-03 00:31:49 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2011-Feb-03 00:31:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2011-Feb-03 00:31:49 STOP finish_task: Finishing task 'configuring IF/LO path' 2011-Feb-03 00:31:49 LOG5 finish_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2011-Feb-03 00:31:49 DONE finish_task: DONE finished configuration: IF/LO path 2011-Feb-03 00:31:49 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Feb-03 00:31:49 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2011-Feb-03 00:31:49 LOG5 end_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2011-Feb-03 00:31:49 BEGIN begin_task: Starting task 'configuring WAPPs' 2011-Feb-03 00:31:49 LOG5 begin_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2011-Feb-03 00:31:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2011-Feb-03 00:31:49 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2011-Feb-03 00:31:49 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Feb-03 00:31:49 START begin_task: Starting task 'selecting calibration port' 2011-Feb-03 00:31:49 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2011-Feb-03 00:31:49 LOG3 vw_send: To DATATAKING: calport 3 2011-Feb-03 00:31:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Feb-03 00:31:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 00:31:49 START begin_task: Starting task 'waiting on calport' 2011-Feb-03 00:31:49 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2011-Feb-03 00:31:50 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:31:50 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Feb-03 00:31:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 00:31:50 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:31:50 LOG4 got_cormsg: From DATATAKING: DONE 2011-Feb-03 00:31:50 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Feb-03 00:31:50 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2011-Feb-03 00:31:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Feb-03 00:31:50 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Feb-03 00:31:50 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2011-Feb-03 00:31:50 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Feb-03 00:31:50 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Feb-03 00:31:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Feb-03 00:31:50 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2011-Feb-03 00:31:50 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:31:50 LOG3 CALCONTROL-caltrig: Software trigger 2011-Feb-03 00:31:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Feb-03 00:31:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Feb-03 00:31:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Feb-03 00:31:50 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2011-Feb-03 00:31:50 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2011-Feb-03 00:31:50 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2011-Feb-03 00:31:50 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2011-Feb-03 00:31:50 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2011-Feb-03 00:31:50 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2011-Feb-03 00:31:50 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2011-Feb-03 00:31:50 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2011-Feb-03 00:31:50 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2011-Feb-03 00:31:50 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel Cabrera 2011-Feb-03 00:31:50 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel Cabrera 2011-Feb-03 00:31:50 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel Cabrera 2011-Feb-03 00:31:50 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel Cabrera 2011-Feb-03 00:31:50 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Feb-03 00:31:50 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Feb-03 00:31:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Feb-03 00:31:50 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2011-Feb-03 00:31:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2011-Feb-03 00:31:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2011-Feb-03 00:31:50 LOG3 CALCONTROL-caltrig: Software trigger 2011-Feb-03 00:31:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2011-Feb-03 00:31:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Feb-03 00:31:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Feb-03 00:31:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Feb-03 00:31:50 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2011-Feb-03 00:31:50 LOG3 sock_errsend: To WAPPDATA: FLUSH 2011-Feb-03 00:31:50 STOP finish_task: Finishing task 'configuring WAPPs' 2011-Feb-03 00:31:50 LOG5 finish_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2011-Feb-03 00:31:50 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2011-Feb-03 00:31:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Feb-03 00:31:50 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2011-Feb-03 00:31:50 LOG5 end_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2011-Feb-03 00:31:50 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2011-Feb-03 00:31:50 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2011-Feb-03 00:31:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2011-Feb-03 00:31:50 INFO1 config_mock: Starting to configure the Mock spectrometer 2011-Feb-03 00:31:51 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2011-Feb-03 00:31:51 START begin_task: Starting task 'selecting calibration port' 2011-Feb-03 00:31:51 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2011-Feb-03 00:31:51 LOG3 vw_send: To DATATAKING: calport 3 2011-Feb-03 00:31:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2011-Feb-03 00:31:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 00:31:51 START begin_task: Starting task 'waiting on calport' 2011-Feb-03 00:31:51 LOG5 begin_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2011-Feb-03 00:31:51 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2011-Feb-03 00:31:51 LOG4 got_cormsg: From DATATAKING: calport 3 2011-Feb-03 00:31:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 00:31:51 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:31:51 LOG4 got_cormsg: From DATATAKING: DONE 2011-Feb-03 00:31:51 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2011-Feb-03 00:31:51 LOG5 end_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2011-Feb-03 00:31:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2011-Feb-03 00:31:51 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2011-Feb-03 00:31:51 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2011-Feb-03 00:31:51 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Feb-03 00:31:51 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Feb-03 00:31:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Feb-03 00:31:51 LOG5 begin_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2011-Feb-03 00:31:51 LOG3 CALCONTROL-caltrig: Software trigger 2011-Feb-03 00:31:51 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:31:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Feb-03 00:31:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Feb-03 00:31:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Feb-03 00:31:51 LOG5 end_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2011-Feb-03 00:31:51 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2011-Feb-03 00:31:51 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2011-Feb-03 00:31:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Feb-03 00:31:51 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2011-Feb-03 00:31:51 LOG3 CALCONTROL-caltrig: Software trigger 2011-Feb-03 00:31:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Feb-03 00:31:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Feb-03 00:31:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Feb-03 00:31:51 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2011-Feb-03 00:31:51 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2011-Feb-03 00:31:51 LOG3 socket_wait: To MOCK: NOP 2011-Feb-03 00:31:51 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2011-Feb-03 00:31:51 LOG5 begin_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2011-Feb-03 00:31:52 ALERT got_mock_message: Mock spectrometer restarting 2011-Feb-03 00:31:52 LOG4 from_mock: From MOCK: nop ok 2011-Feb-03 00:31:52 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2011-Feb-03 00:31:52 LOG5 end_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2011-Feb-03 00:31:52 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2011-Feb-03 00:31:52 LOG2 config_mock: Mock spectrometer configuration group 1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2011-Feb-03 00:31:52 LOG2 config_mock: Mock spectrometer configuration group 1 (0): datatype=AB 2011-Feb-03 00:31:52 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bits=32 2011-Feb-03 00:31:52 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bwmhz=172.032 2011-Feb-03 00:31:52 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevif1hz=250000000 2011-Feb-03 00:31:52 LOG2 config_mock: Mock spectrometer configuration group 1 (0): digfreqoffhz=0.0 2011-Feb-03 00:31:52 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fftlen=8192 2011-Feb-03 00:31:52 LOG2 config_mock: Mock spectrometer configuration group 1 (0): dumptmsec=1.0 2011-Feb-03 00:31:52 LOG2 config_mock: Mock spectrometer configuration group 1 (0): blankatod=1 2011-Feb-03 00:31:52 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskadc=13 2011-Feb-03 00:31:52 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskpfb=0 2011-Feb-03 00:31:52 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskacc=0 2011-Feb-03 00:31:52 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskash=0 2011-Feb-03 00:31:52 LOG2 config_mock: Mock spectrometer configuration group 1 (0): adcclkhz=172032000 2011-Feb-03 00:31:52 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevlohz=175000000 325000000 2011-Feb-03 00:31:52 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fileprefix=a2048 2011-Feb-03 00:31:52 LOG2 config_mock: Mock spectrometer configuration group 1 (0): maxfilesizemb=2048 2011-Feb-03 00:31:52 LOG2 config_mock: Mock spectrometer configuration group 1 (0): calctl=c0 2011-Feb-03 00:31:52 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group 1' using string 'conf' 2011-Feb-03 00:31:52 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bits=32:bwmhz=172.032:pdevif1hz=250000000:digfreqoffhz=0.0:fftlen=8192:dumptmsec=1.0:blankatod=1:emaskadc=13:emaskpfb=0:emaskacc=0:emaskash=0:adcclkhz=172032000:pdevlohz=175000000 325000000:fileprefix=a2048:maxfilesizemb=2048:calctl=c0 2011-Feb-03 00:31:52 START begin_task: Starting task 'waiting on configure Mock spectrometer group 1' 2011-Feb-03 00:31:52 LOG5 begin_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2011-Feb-03 00:31:53 LOG4 from_mock: From MOCK: confok 2011-Feb-03 00:31:53 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group 1' with status 'OK' 2011-Feb-03 00:31:53 LOG5 end_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2011-Feb-03 00:31:53 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group 1' 2011-Feb-03 00:31:53 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group 2' using string 'conf' 2011-Feb-03 00:31:53 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2011-Feb-03 00:31:53 START begin_task: Starting task 'waiting on disable Mock spectrometer group 2' 2011-Feb-03 00:31:53 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2011-Feb-03 00:31:53 LOG4 from_mock: From MOCK: confok 2011-Feb-03 00:31:53 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group 2' with status 'OK' 2011-Feb-03 00:31:53 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2011-Feb-03 00:31:53 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group 2' 2011-Feb-03 00:31:53 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2011-Feb-03 00:31:53 LOG5 finish_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2011-Feb-03 00:31:53 DONE finish_task: DONE finished configuring: the Mock spectrometer 2011-Feb-03 00:31:53 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Feb-03 00:31:53 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2011-Feb-03 00:31:53 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2011-Feb-03 00:31:53 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2011-Feb-03 00:31:53 COMMAND run_command_line: EXECUTING command 29: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2011-Feb-03 00:31:53 COMMAND run_command_line: EXECUTING command 30: 'CATALOG AGESFull.cat' 2011-Feb-03 00:31:53 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2011-Feb-03 00:31:53 COMMAND run_command_line: EXECUTING command 33: 'IF LSTSLEW(AGES3193_p2_108) < 090738 THEN' 2011-Feb-03 00:31:53 LOG3 is_if_valid: Current source data: up 255.8 13.6 UP - - 139 0.8 2011-Feb-03 00:31:53 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p2_108) < 090738 2011-Feb-03 00:31:53 INFO5 is_if_valid: Condition parsed as: 8.9616183333333339 < 9.1272222222222226 2011-Feb-03 00:31:53 COMMAND run_command_line: EXECUTING command 34: 'FIXEDDRIFT az=253.60 alfaangle=-56.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_108 ra=95300.00 dec=211230.00' 2011-Feb-03 00:31:53 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Feb-03 00:31:54 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Feb-03 00:31:54 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 253.60 -56.3 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p2_108 95300.00 211230.00 J 8500.0 Heliocentric velocity(optical)' 2011-Feb-03 00:31:54 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Feb-03 00:31:54 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2011-Feb-03 00:31:54 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'galfasrc2' 2011-Feb-03 00:31:54 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Feb-03 00:31:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_108} 2011-Feb-03 00:31:54 INFO3 fixed_driftmap: Sending telescope to Az = 253.60 and ZA = 11.17 2011-Feb-03 00:31:54 LOG3 track_source: Calling 'track_source AGES3193_p2_108 253.60 11.1730685679 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Feb-03 00:31:54 START begin_task: Starting task 'sending tracking commands' 2011-Feb-03 00:31:54 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2011-Feb-03 00:31:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_108} INFO {Slewing to source 'AGES3193_p2_108' ...} 2011-Feb-03 00:31:54 INFO1 track_source: Starting to track AGES3193_p2_108 2011-Feb-03 00:31:54 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_108" 2011-Feb-03 00:31:54 LOG3 vw_send: To DATATAKING: set ra 253.60 2011-Feb-03 00:31:54 LOG3 vw_send: To DATATAKING: set dec 11.1730685679 2011-Feb-03 00:31:54 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Feb-03 00:31:54 LOG3 vw_send: To DATATAKING: pnt tr 253.60 11.1730685679 -CF 2011-Feb-03 00:31:54 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 00:31:54 STOP finish_task: Finishing task 'sending tracking commands' 2011-Feb-03 00:31:54 LOG5 finish_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2011-Feb-03 00:31:54 INFO2 finish_task: DONE finished sending: tracking commands 2011-Feb-03 00:31:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 00:31:54 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Feb-03 00:31:54 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2011-Feb-03 00:31:54 START begin_task: Starting task 'rotate ALFA to -56.3 degrees' 2011-Feb-03 00:31:54 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2011-Feb-03 00:31:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -56.3 degrees ...} 2011-Feb-03 00:31:54 INFO2 rotate_alfa: ALFA commanded to -56.3 degrees 2011-Feb-03 00:31:54 LOG3 sock_errsend: To ALFAMOTOR: POSITION -56.3 REPLY 2011-Feb-03 00:31:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Feb-03 00:31:54 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Feb-03 00:31:54 LOG5 begin_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2011-Feb-03 00:31:54 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_108" 2011-Feb-03 00:31:54 LOG4 got_cormsg: From DATATAKING: set ra 253.60 2011-Feb-03 00:31:54 LOG4 got_cormsg: From DATATAKING: set dec 11.1730685679 2011-Feb-03 00:31:54 LOG4 got_cormsg: From DATATAKING: vw% 253.60 2011-Feb-03 00:31:54 LOG4 got_cormsg: From DATATAKING: vw% 11.1730685679 2011-Feb-03 00:31:54 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:31:54 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Feb-03 00:31:54 LOG4 got_cormsg: From DATATAKING: pnt tr 253.60 11.1730685679 -CF 2011-Feb-03 00:31:54 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 00:31:54 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Feb-03 00:31:54 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:32:37 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Feb-03 00:32:37 INFO3 alfa_motor: ALFA rotator in-position -56.30 degrees 2011-Feb-03 00:32:37 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Feb-03 00:32:37 LOG5 end_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2011-Feb-03 00:32:37 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Feb-03 00:32:37 STOP finish_task: Finishing task 'rotate ALFA to -56.3 degrees' 2011-Feb-03 00:32:37 LOG5 finish_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2011-Feb-03 00:32:37 INFO2 finish_task: DONE finished configuration: rotating ALFA to -56.3 degrees 2011-Feb-03 00:32:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 00:32:37 STOP end_task: Finishing task 'rotate ALFA to -56.3 degrees' with status 'OK' 2011-Feb-03 00:32:37 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2011-Feb-03 00:32:37 START begin_task: Starting task 'waiting on telescope' 2011-Feb-03 00:32:37 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2011-Feb-03 00:32:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Feb-03 00:32:37 LOG3 waittrk: Start waittrk 5 2011-Feb-03 00:32:37 START begin_task: Starting task 'waiting on telescope movement' 2011-Feb-03 00:32:37 LOG5 begin_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2011-Feb-03 00:32:42 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Feb-03 00:32:42 LOG5 end_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2011-Feb-03 00:32:42 START begin_task: Starting task 'waiting on telescope on source' 2011-Feb-03 00:32:42 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2011-Feb-03 00:32:42 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Feb-03 00:32:42 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2011-Feb-03 00:32:42 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Feb-03 00:32:42 INFO2 waittrk: Now tracking AGES3193_p2_108 2011-Feb-03 00:32:42 LOG4 waittrk: Current telescope position: Az = 253.15 ZA = 11.18 2011-Feb-03 00:32:42 STOP finish_task: Finishing task 'waiting on telescope' 2011-Feb-03 00:32:42 LOG5 finish_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2011-Feb-03 00:32:42 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Feb-03 00:32:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 00:32:42 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Feb-03 00:32:42 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2011-Feb-03 00:32:42 START begin_task: Starting task 'selecting calibration type' 2011-Feb-03 00:32:42 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2011-Feb-03 00:32:42 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Feb-03 00:32:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Feb-03 00:32:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 00:32:42 START begin_task: Starting task 'waiting on setcal' 2011-Feb-03 00:32:42 LOG5 begin_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2011-Feb-03 00:32:42 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Feb-03 00:32:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 00:32:43 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:32:43 LOG4 got_cormsg: From DATATAKING: DONE 2011-Feb-03 00:32:43 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Feb-03 00:32:43 LOG5 end_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2011-Feb-03 00:32:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Feb-03 00:32:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Feb-03 00:32:43 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Feb-03 00:32:43 START begin_task: Starting task 'waiting on command to ALFA' 2011-Feb-03 00:32:43 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2011-Feb-03 00:32:43 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:32:43 LOG4 got_alfamon: From ALFAMON: ACK 2011-Feb-03 00:32:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Feb-03 00:32:43 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2011-Feb-03 00:32:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Feb-03 00:32:43 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Feb-03 00:32:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Feb-03 00:32:43 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Feb-03 00:32:43 START begin_task: Starting task 'waiting on command to ALFA' 2011-Feb-03 00:32:43 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2011-Feb-03 00:32:43 LOG4 got_alfamon: From ALFAMON: ACK 2011-Feb-03 00:32:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Feb-03 00:32:43 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2011-Feb-03 00:32:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Feb-03 00:32:43 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Feb-03 00:32:43 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Feb-03 00:32:43 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2011-Feb-03 00:32:43 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Feb-03 00:32:43 INFO2 astwait: Waiting for 534 seconds from 04:32:43 to 04:41:37 UTC ... 2011-Feb-03 00:32:43 LOG4 send_obs_status: To obs_status: <1> TASKTIME 534 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Feb-03 00:32:43 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Feb-03 00:32:43 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2011-Feb-03 00:40:41 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 00:40:41.312 (seconds: 2441.312)!} 2011-Feb-03 00:40:41 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 00:40:41.312 (seconds: 2441.312)! 2011-Feb-03 00:41:37 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Feb-03 00:41:37 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2011-Feb-03 00:41:37 INFO3 astwait: Finished waiting 2011-Feb-03 00:41:37 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Feb-03 00:41:37 LOG5 dopset_later: Calling 'dopset_later 60.86469500302789' 2011-Feb-03 00:41:37 INFO3 dopset_later: Setting Doppler correction for 00:42:37 (60.9 seconds from now) 2011-Feb-03 00:41:37 LOG5 antvel: Calling 'antvel 253.600000 11.173069 F Heliocentric 60.86469500302789' 2011-Feb-03 00:41:37 LOG2 antvel: Transforming current Az = 253.60 ZA = 11.17 to apparent RA = 09:53:39.6 Dec = +21:09:07.1 2011-Feb-03 00:41:37 LOG2 antvel: Parameters to Doppler: Heliocentric 16957 2011 34 0.0 2011-Feb-03 00:41:37 INFO5 antvel: Computed antenna velocity: -5.18373 km/s 2011-Feb-03 00:41:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-5.1837336022000002 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Feb-03 00:41:37 INFO4 dopset_gen: New sky frequencies: 1381.267312 1381.267312 1381.267312 1381.267312 1381.267312 1381.267312 1381.267312 1381.267312 1381.267312 2011-Feb-03 00:41:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.267312 sky0=1381.267312 sky1=1381.267312 sky2=1381.267312 sky3=1381.267312 sky4=1381.267312 sky5=1381.267312 sky6=1381.267312 sky7=1381.267312 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 00:41:37 LOG2 dopset_gen: Result from 'sky2syn': 1631.267312 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 00:41:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631267312.0} 2011-Feb-03 00:41:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:41:37 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Feb-03 00:41:37 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Feb-03 00:41:37 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:04.6 Dec = +21:12:15.8 2011-Feb-03 00:41:37 LOG3 track_source: Calling 'track_source AGES3193_p2_108 095204.6 211215.8 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Feb-03 00:41:37 START begin_task: Starting task 'sending tracking commands' 2011-Feb-03 00:41:37 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2011-Feb-03 00:41:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_108} INFO {Slewing to source 'AGES3193_p2_108' ...} 2011-Feb-03 00:41:37 INFO1 track_source: Starting to track AGES3193_p2_108 2011-Feb-03 00:41:37 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_108" 2011-Feb-03 00:41:37 LOG3 vw_send: To DATATAKING: set ra 095204.6 2011-Feb-03 00:41:37 LOG3 vw_send: To DATATAKING: set dec 211215.8 2011-Feb-03 00:41:37 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Feb-03 00:41:37 LOG3 vw_send: To DATATAKING: pnt tr 095204.6 211215.8 -CJ 2011-Feb-03 00:41:37 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 00:41:37 STOP finish_task: Finishing task 'sending tracking commands' 2011-Feb-03 00:41:37 LOG5 finish_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2011-Feb-03 00:41:37 INFO2 finish_task: DONE finished sending: tracking commands 2011-Feb-03 00:41:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 00:41:37 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Feb-03 00:41:37 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2011-Feb-03 00:41:37 START begin_task: Starting task 'waiting on telescope' 2011-Feb-03 00:41:37 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2011-Feb-03 00:41:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Feb-03 00:41:37 LOG3 waittrk: Start waittrk 5 2011-Feb-03 00:41:37 START begin_task: Starting task 'waiting on telescope movement' 2011-Feb-03 00:41:37 LOG5 begin_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2011-Feb-03 00:41:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631267312.0} 2011-Feb-03 00:41:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 00:41:37 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_108" 2011-Feb-03 00:41:37 LOG4 got_cormsg: From DATATAKING: set ra 095204.6 2011-Feb-03 00:41:37 LOG4 got_cormsg: From DATATAKING: set dec 211215.8 2011-Feb-03 00:41:37 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Feb-03 00:41:37 LOG4 got_cormsg: From DATATAKING: vw% 095204.6 2011-Feb-03 00:41:37 LOG4 got_cormsg: From DATATAKING: vw% 211215.8 2011-Feb-03 00:41:37 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:41:37 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Feb-03 00:41:37 LOG4 got_cormsg: From DATATAKING: pnt tr 095204.6 211215.8 -CJ 2011-Feb-03 00:41:37 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 00:41:37 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Feb-03 00:41:37 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:41:42 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Feb-03 00:41:42 LOG5 end_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2011-Feb-03 00:41:42 START begin_task: Starting task 'waiting on telescope on source' 2011-Feb-03 00:41:42 LOG5 begin_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2011-Feb-03 00:41:44 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Feb-03 00:41:44 LOG5 end_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2011-Feb-03 00:41:44 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Feb-03 00:41:44 INFO2 waittrk: Now tracking AGES3193_p2_108 2011-Feb-03 00:41:44 LOG4 waittrk: Current telescope position: Az = 253.16 ZA = 11.16 2011-Feb-03 00:41:44 STOP finish_task: Finishing task 'waiting on telescope' 2011-Feb-03 00:41:44 LOG5 finish_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2011-Feb-03 00:41:44 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Feb-03 00:41:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 00:41:44 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Feb-03 00:41:44 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2011-Feb-03 00:41:44 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Feb-03 00:41:44 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2011-Feb-03 00:41:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Feb-03 00:41:44 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Feb-03 00:41:44 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Feb-03 00:41:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Feb-03 00:41:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 00:41:44 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Feb-03 00:41:44 LOG5 begin_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2011-Feb-03 00:41:45 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Feb-03 00:41:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 00:41:48 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:41:48 LOG4 got_cormsg: From DATATAKING: DONE 2011-Feb-03 00:41:48 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Feb-03 00:41:48 LOG5 end_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2011-Feb-03 00:41:48 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Feb-03 00:41:48 START begin_task: Starting task 'adjusting WAPP power' 2011-Feb-03 00:41:48 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2011-Feb-03 00:41:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Feb-03 00:41:48 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Feb-03 00:41:48 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Feb-03 00:41:48 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Feb-03 00:41:48 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Feb-03 00:41:48 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Feb-03 00:41:48 LOG5 begin_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2011-Feb-03 00:41:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Feb-03 00:41:48 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:41:48 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 7 dB 2011-Feb-03 00:41:48 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 3 3 dB 2011-Feb-03 00:41:48 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2011-Feb-03 00:41:48 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 4 0 dB --- beam 7: 4 0 dB 2011-Feb-03 00:41:48 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Feb-03 00:41:48 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Feb-03 00:41:48 LOG5 end_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2011-Feb-03 00:41:48 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.960 1.064 ALFA beam 1: 1.065 0.913 2011-Feb-03 00:41:48 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.983 1.122 ALFA beam 3: 0.934 1.093 2011-Feb-03 00:41:48 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.944 0.891 ALFA beam 5: 0.959 1.104 2011-Feb-03 00:41:49 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.862 0.036 ALFA beam 7: 0.958 0.043 2011-Feb-03 00:41:49 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Feb-03 00:41:49 LOG5 finish_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2011-Feb-03 00:41:49 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Feb-03 00:41:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 00:41:49 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Feb-03 00:41:49 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2011-Feb-03 00:41:49 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Feb-03 00:41:49 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2011-Feb-03 00:41:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Feb-03 00:41:49 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Feb-03 00:41:49 LOG3 socket_wait: To MOCK: ADJP30 2011-Feb-03 00:41:49 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Feb-03 00:41:49 LOG5 begin_task: Level: (5) ID = <10127> Status = 0 0 0 0 ok 2011-Feb-03 00:41:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 00:41:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.960 1.064 1.065 0.913 2011-Feb-03 00:41:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.983 1.122 0.934 1.093 2011-Feb-03 00:41:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.944 0.891 0.959 1.104 2011-Feb-03 00:41:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.862 0.036 0.958 0.043 2011-Feb-03 00:41:55 INFO3 from_mock: From MOCK: b0s0g0 rms:A 32.9 28.9 B 30.0 30.0 mn:A -0.1 -0.0 B 0.6 0.5 gn: 10 10 2011-Feb-03 00:41:55 INFO3 from_mock: From MOCK: b0s1g0 rms:A 42.4 40.5 B 38.1 40.4 mn:A 0.2 -0.3 B 0.3 0.1 gn: 8 7 2011-Feb-03 00:41:55 INFO3 from_mock: From MOCK: b1s0g0 rms:A 31.6 29.7 B 30.2 27.1 mn:A -0.3 -0.2 B 0.1 -0.0 gn: 9 9 2011-Feb-03 00:41:55 INFO3 from_mock: From MOCK: b1s1g0 rms:A 48.4 44.7 B 42.1 42.1 mn:A -0.1 -0.3 B 0.5 -0.1 gn: 5 6 2011-Feb-03 00:41:55 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.9 29.0 B 30.0 31.3 mn:A -0.2 -0.5 B 0.1 -0.2 gn: 10 11 2011-Feb-03 00:41:55 INFO3 from_mock: From MOCK: b2s1g0 rms:A 44.6 44.8 B 44.3 41.2 mn:A 0.2 -0.1 B -0.1 0.1 gn: 7 9 2011-Feb-03 00:41:55 INFO3 from_mock: From MOCK: b3s0g0 rms:A 30.4 30.3 B 30.3 27.0 mn:A 0.5 0.0 B 0.1 -0.1 gn: 11 11 2011-Feb-03 00:41:55 INFO3 from_mock: From MOCK: b3s1g0 rms:A 43.9 42.9 B 41.3 43.0 mn:A 0.3 0.8 B 0.6 -0.3 gn: 7 8 2011-Feb-03 00:41:55 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.4 29.5 B 30.2 30.4 mn:A -0.1 -0.2 B 0.1 -0.4 gn: 10 14 2011-Feb-03 00:41:55 INFO3 from_mock: From MOCK: b4s1g0 rms:A 30.2 27.4 B 36.9 35.4 mn:A 0.0 -0.3 B -0.2 -0.9 gn: 8 13 2011-Feb-03 00:41:55 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.6 29.1 B 31.4 31.3 mn:A 0.3 -0.1 B 0.4 0.4 gn: 12 12 2011-Feb-03 00:41:55 INFO3 from_mock: From MOCK: b5s1g0 rms:A 35.3 34.5 B 46.9 47.0 mn:A -0.0 0.0 B -0.1 0.0 gn: 7 7 2011-Feb-03 00:41:55 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.9 30.2 B 29.1 29.9 mn:A 0.0 -0.8 B 0.3 -0.5 gn: 12 29 2011-Feb-03 00:41:55 INFO3 from_mock: From MOCK: b6s1g0 rms:A 45.8 42.0 B 31.2 30.3 mn:A -0.4 0.6 B -0.1 -0.1 gn: 8 31 2011-Feb-03 00:41:55 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Feb-03 00:41:55 LOG5 end_task: Level: (5) ID = <10127> Status = 0 0 0 0 ok 2011-Feb-03 00:41:55 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Feb-03 00:41:55 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Feb-03 00:41:55 LOG5 finish_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2011-Feb-03 00:41:55 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Feb-03 00:41:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 00:41:55 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Feb-03 00:41:55 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2011-Feb-03 00:41:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Feb-03 00:41:55 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Feb-03 00:41:55 LOG5 finish_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2011-Feb-03 00:41:55 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Feb-03 00:41:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 00:41:55 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Feb-03 00:41:55 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2011-Feb-03 00:41:55 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel Cabrera 2011-Feb-03 00:41:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel Cabrera 2011-Feb-03 00:41:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel Cabrera 2011-Feb-03 00:41:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel Cabrera 2011-Feb-03 00:41:55 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Feb-03 00:41:55 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Feb-03 00:41:55 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2011-Feb-03 00:41:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Feb-03 00:41:55 START begin_task: Starting task 'selecting calibration type' 2011-Feb-03 00:41:55 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2011-Feb-03 00:41:55 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Feb-03 00:41:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Feb-03 00:41:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 00:41:55 START begin_task: Starting task 'waiting on setcal' 2011-Feb-03 00:41:55 LOG5 begin_task: Level: (5) ID = <10130> Status = 0 0 0 0 ok 2011-Feb-03 00:41:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2011-Feb-03 00:41:55 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Feb-03 00:41:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 00:41:55 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:41:55 LOG4 got_cormsg: From DATATAKING: DONE 2011-Feb-03 00:41:55 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Feb-03 00:41:55 LOG5 end_task: Level: (5) ID = <10130> Status = 0 0 0 0 ok 2011-Feb-03 00:41:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Feb-03 00:41:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Feb-03 00:41:56 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Feb-03 00:41:56 START begin_task: Starting task 'waiting on command to ALFA' 2011-Feb-03 00:41:56 LOG5 begin_task: Level: (5) ID = <10131> Status = 0 0 0 0 ok 2011-Feb-03 00:41:56 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:41:56 LOG4 got_alfamon: From ALFAMON: ACK 2011-Feb-03 00:41:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Feb-03 00:41:56 LOG5 end_task: Level: (5) ID = <10131> Status = 0 0 0 0 ok 2011-Feb-03 00:41:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Feb-03 00:41:56 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Feb-03 00:41:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Feb-03 00:41:56 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Feb-03 00:41:56 START begin_task: Starting task 'waiting on command to ALFA' 2011-Feb-03 00:41:56 LOG5 begin_task: Level: (5) ID = <10132> Status = 0 0 0 0 ok 2011-Feb-03 00:41:56 LOG4 got_alfamon: From ALFAMON: ACK 2011-Feb-03 00:41:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Feb-03 00:41:56 LOG5 end_task: Level: (5) ID = <10132> Status = 0 0 0 0 ok 2011-Feb-03 00:41:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Feb-03 00:41:56 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Feb-03 00:41:56 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Feb-03 00:41:56 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2011-Feb-03 00:41:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Feb-03 00:41:56 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Feb-03 00:41:56 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Feb-03 00:41:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Feb-03 00:41:56 LOG5 begin_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2011-Feb-03 00:41:56 LOG3 CALCONTROL-caltrig: Software trigger 2011-Feb-03 00:41:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Feb-03 00:41:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Feb-03 00:41:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Feb-03 00:41:56 LOG5 end_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2011-Feb-03 00:41:56 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Feb-03 00:41:56 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Feb-03 00:41:56 LOG5 begin_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2011-Feb-03 00:41:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Feb-03 00:41:56 LOG5 log_alfabeam: Parameters: 9.8679444444444471 21.204388888888886 9.116244 2011.0931666223032 -56.300076 2011-Feb-03 00:41:56 LOG4 log_alfabeam: ALFABEAM 0 9.867944444444445 21.204388888888904 2011-Feb-03 00:41:56 LOG4 log_alfabeam: ALFABEAM 1 9.868863039828973 21.113849902766386 2011-Feb-03 00:41:56 LOG4 log_alfabeam: ALFABEAM 2 9.874926446754007 21.173855901353136 2011-Feb-03 00:41:56 LOG4 log_alfabeam: ALFABEAM 3 9.873975827739665 21.265111983195304 2011-Feb-03 00:41:56 LOG4 log_alfabeam: ALFABEAM 4 9.866971356616169 21.294873923519258 2011-Feb-03 00:41:56 LOG4 log_alfabeam: ALFABEAM 5 9.860956153787956 21.234026793611743 2011-Feb-03 00:41:56 LOG4 log_alfabeam: ALFABEAM 6 9.861897072537467 21.144257244703418 2011-Feb-03 00:41:56 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Feb-03 00:41:56 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Feb-03 00:41:56 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Feb-03 00:41:56 LOG3 take_mock_data: PSET configuration: object=AGES3193_p2_108 2011-Feb-03 00:41:56 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Feb-03 00:41:56 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Feb-03 00:41:56 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Feb-03 00:41:56 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Feb-03 00:41:56 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Feb-03 00:41:56 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Feb-03 00:41:56 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Feb-03 00:41:56 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Feb-03 00:41:56 LOG3 take_mock_data: PSET configuration: patternid=103400024 2011-Feb-03 00:41:56 LOG3 take_mock_data: PSET configuration: scanid=103400038 2011-Feb-03 00:41:56 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Feb-03 00:41:56 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Feb-03 00:41:56 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Feb-03 00:41:56 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456267312.0 2011-Feb-03 00:41:56 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306267312.0 2011-Feb-03 00:41:56 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Feb-03 00:41:56 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Feb-03 00:41:56 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGES3193_p2_108:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=103400024:scanid=103400038:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456267312.0:topobfreqhz=1306267312.0:filetype=1 2011-Feb-03 00:41:56 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Feb-03 00:41:56 LOG5 begin_task: Level: (5) ID = <10135> Status = 0 0 0 0 ok 2011-Feb-03 00:41:56 LOG4 from_mock: From MOCK: psetok 2011-Feb-03 00:41:56 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Feb-03 00:41:56 LOG5 end_task: Level: (5) ID = <10135> Status = 0 0 0 0 ok 2011-Feb-03 00:41:56 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Feb-03 00:41:56 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Feb-03 00:41:56 LOG3 socket_wait: To MOCK: STAR5 2011-Feb-03 00:41:56 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Feb-03 00:41:56 LOG5 begin_task: Level: (5) ID = <10136> Status = 0 0 0 0 ok 2011-Feb-03 00:41:56 NOTE WAPPDATA-new_file: New FITS file: wapp.20110203.a2048.0001.fits 2011-Feb-03 00:41:56 LOG4 from_mock: From MOCK: starok 2011-Feb-03 00:41:56 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Feb-03 00:41:56 LOG5 end_task: Level: (5) ID = <10136> Status = 0 0 0 0 ok 2011-Feb-03 00:41:56 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Feb-03 00:41:56 INFO2 take_data: Starting WAPP+Mock 5-second scan: 103400038 2011-Feb-03 00:41:57 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Feb-03 00:41:57 LOG5 begin_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2011-Feb-03 00:41:57 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20110203.a2048.0001.fits} 2011-Feb-03 00:41:57 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Feb-03 00:41:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 00:41:57 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Feb-03 00:41:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Feb-03 00:41:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16918.00 2011-Feb-03 00:41:59 INFO2 got_mock_message: Mock spectrometer start file number is 00000 2011-Feb-03 00:41:59 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Feb-03 00:41:59 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Feb-03 00:41:59 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Feb-03 00:41:59 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Feb-03 00:41:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Feb-03 00:41:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2011-Feb-03 00:41:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Feb-03 00:41:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Feb-03 00:41:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Feb-03 00:41:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Feb-03 00:41:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Feb-03 00:41:59 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Feb-03 00:41:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2011-Feb-03 00:41:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2011-Feb-03 00:41:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2011-Feb-03 00:41:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2011-Feb-03 00:41:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2011-Feb-03 00:41:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2011-Feb-03 00:41:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2011-Feb-03 00:42:02 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 00:42:02.01 2011-Feb-03 00:42:02 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1296708122.01 Thu Feb 3 00:42:02 2011 2011-Feb-03 00:42:02 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Feb-03 00:42:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.267312 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 00:42:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.267312 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:42:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.267312 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:42:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.267312 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:42:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.267312 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:42:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.267312 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:42:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.267312 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:42:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.267312 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:42:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.267312 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.441 (still bad) 2011-Feb-03 00:42:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 00:42:07 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Feb-03 00:42:08 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Feb-03 00:42:08 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Feb-03 00:42:08 LOG5 end_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2011-Feb-03 00:42:08 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Feb-03 00:42:08 LOG5 end_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2011-Feb-03 00:42:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Feb-03 00:42:08 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Feb-03 00:42:08 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Feb-03 00:42:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Feb-03 00:42:08 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2011-Feb-03 00:42:08 LOG3 CALCONTROL-caltrig: Software trigger 2011-Feb-03 00:42:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Feb-03 00:42:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Feb-03 00:42:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Feb-03 00:42:08 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2011-Feb-03 00:42:08 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Feb-03 00:42:08 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Feb-03 00:42:08 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2011-Feb-03 00:42:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Feb-03 00:42:08 LOG5 log_alfabeam: Parameters: 9.8679444444444471 21.204388888888886 9.119586 2011.0931670025604 -56.300076 2011-Feb-03 00:42:08 LOG4 log_alfabeam: ALFABEAM 0 9.867944444444442 21.204388888888886 2011-Feb-03 00:42:08 LOG4 log_alfabeam: ALFABEAM 1 9.868870858984124 21.113865615072527 2011-Feb-03 00:42:08 LOG4 log_alfabeam: ALFABEAM 2 9.874929112765567 21.173973872267030 2011-Feb-03 00:42:08 LOG4 log_alfabeam: ALFABEAM 3 9.873970455024303 21.265216693182541 2011-Feb-03 00:42:08 LOG4 log_alfabeam: ALFABEAM 4 9.866963307172805 21.294857049979726 2011-Feb-03 00:42:08 LOG4 log_alfabeam: ALFABEAM 5 9.860953556601837 21.233905204630158 2011-Feb-03 00:42:08 LOG4 log_alfabeam: ALFABEAM 6 9.861902304580992 21.144154963119608 2011-Feb-03 00:42:08 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Feb-03 00:42:08 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Feb-03 00:42:08 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Feb-03 00:42:08 LOG3 take_mock_data: PSET configuration: object=AGES3193_p2_108 2011-Feb-03 00:42:08 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Feb-03 00:42:08 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Feb-03 00:42:08 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Feb-03 00:42:08 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Feb-03 00:42:08 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Feb-03 00:42:08 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Feb-03 00:42:08 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Feb-03 00:42:08 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Feb-03 00:42:08 LOG3 take_mock_data: PSET configuration: patternid=103400024 2011-Feb-03 00:42:08 LOG3 take_mock_data: PSET configuration: scanid=103400039 2011-Feb-03 00:42:08 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Feb-03 00:42:08 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Feb-03 00:42:08 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Feb-03 00:42:08 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456267312.0 2011-Feb-03 00:42:08 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306267312.0 2011-Feb-03 00:42:08 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Feb-03 00:42:08 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Feb-03 00:42:08 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGES3193_p2_108:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=103400024:scanid=103400039:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456267312.0:topobfreqhz=1306267312.0:filetype=1 2011-Feb-03 00:42:08 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Feb-03 00:42:08 LOG5 begin_task: Level: (5) ID = <10140> Status = 0 0 0 0 ok 2011-Feb-03 00:42:08 LOG4 from_mock: From MOCK: psetok 2011-Feb-03 00:42:08 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Feb-03 00:42:08 LOG5 end_task: Level: (5) ID = <10140> Status = 0 0 0 0 ok 2011-Feb-03 00:42:08 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Feb-03 00:42:08 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Feb-03 00:42:08 LOG3 socket_wait: To MOCK: STAR5 2011-Feb-03 00:42:08 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Feb-03 00:42:08 LOG5 begin_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2011-Feb-03 00:42:08 LOG4 from_mock: From MOCK: starok 2011-Feb-03 00:42:08 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Feb-03 00:42:08 LOG5 end_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2011-Feb-03 00:42:08 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Feb-03 00:42:08 INFO2 take_data: Starting WAPP+Mock 5-second scan: 103400039 2011-Feb-03 00:42:08 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Feb-03 00:42:08 LOG5 begin_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2011-Feb-03 00:42:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 00:42:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Feb-03 00:42:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16929.00 2011-Feb-03 00:42:09 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Feb-03 00:42:09 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Feb-03 00:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.560 (still bad) 2011-Feb-03 00:42:11 INFO2 got_mock_message: Mock spectrometer start file number is 00100 2011-Feb-03 00:42:11 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Feb-03 00:42:11 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Feb-03 00:42:11 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Feb-03 00:42:11 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Feb-03 00:42:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Feb-03 00:42:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2011-Feb-03 00:42:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Feb-03 00:42:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Feb-03 00:42:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Feb-03 00:42:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Feb-03 00:42:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Feb-03 00:42:11 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Feb-03 00:42:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2011-Feb-03 00:42:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2011-Feb-03 00:42:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2011-Feb-03 00:42:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2011-Feb-03 00:42:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2011-Feb-03 00:42:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2011-Feb-03 00:42:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2011-Feb-03 00:42:14 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 00:42:14.01 2011-Feb-03 00:42:14 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1296708134.01 Thu Feb 3 00:42:14 2011 2011-Feb-03 00:42:14 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Feb-03 00:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.267312 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 00:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.267312 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.267312 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.267312 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.267312 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.267312 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.267312 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.267312 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.267312 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:42:14 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Feb-03 00:42:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 00:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:42:19 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Feb-03 00:42:20 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Feb-03 00:42:20 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Feb-03 00:42:20 LOG5 end_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2011-Feb-03 00:42:20 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Feb-03 00:42:20 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2011-Feb-03 00:42:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Feb-03 00:42:20 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Feb-03 00:42:20 LOG5 finish_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2011-Feb-03 00:42:20 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Feb-03 00:42:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 00:42:20 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Feb-03 00:42:20 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2011-Feb-03 00:42:20 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Feb-03 00:42:20 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 253.60 and ZA = 11.17 2011-Feb-03 00:42:20 LOG3 track_source: Calling 'track_source AGES3193_p2_108 253.60 11.1730685679 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Feb-03 00:42:20 START begin_task: Starting task 'sending tracking commands' 2011-Feb-03 00:42:20 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2011-Feb-03 00:42:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_108} INFO {Slewing to source 'AGES3193_p2_108' ...} 2011-Feb-03 00:42:20 INFO1 track_source: Starting to track AGES3193_p2_108 2011-Feb-03 00:42:20 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_108" 2011-Feb-03 00:42:20 LOG3 vw_send: To DATATAKING: set ra 253.60 2011-Feb-03 00:42:20 LOG3 vw_send: To DATATAKING: set dec 11.1730685679 2011-Feb-03 00:42:20 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Feb-03 00:42:20 LOG3 vw_send: To DATATAKING: pnt tr 253.60 11.1730685679 -CF 2011-Feb-03 00:42:20 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 00:42:20 STOP finish_task: Finishing task 'sending tracking commands' 2011-Feb-03 00:42:20 LOG5 finish_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2011-Feb-03 00:42:20 INFO2 finish_task: DONE finished sending: tracking commands 2011-Feb-03 00:42:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 00:42:20 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Feb-03 00:42:20 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2011-Feb-03 00:42:20 LOG1 fixed_driftmap: Parameters: HA = -00:45:59.3 Start = 09:07:40.5 LST = 09:07:22.5 diff = 17.9 secs 2011-Feb-03 00:42:20 INFO2 fixed_driftmap: Waiting 15.9 seconds for RA 9:53:40 2011-Feb-03 00:42:20 INFO2 lstwait: Waiting for 15.9 secs from LST 09:07:23 to LST 09:07:38 ... 2011-Feb-03 00:42:20 LOG4 send_obs_status: To obs_status: <1> TASKTIME 15.867092835350608 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Feb-03 00:42:20 START begin_task: Starting task 'waiting on wait on LST' 2011-Feb-03 00:42:20 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2011-Feb-03 00:42:20 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_108" 2011-Feb-03 00:42:20 LOG4 got_cormsg: From DATATAKING: set ra 253.60 2011-Feb-03 00:42:20 LOG4 got_cormsg: From DATATAKING: set dec 11.1730685679 2011-Feb-03 00:42:20 LOG4 got_cormsg: From DATATAKING: vw% 253.60 2011-Feb-03 00:42:20 LOG4 got_cormsg: From DATATAKING: vw% 11.1730685679 2011-Feb-03 00:42:20 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:42:20 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Feb-03 00:42:20 LOG4 got_cormsg: From DATATAKING: pnt tr 253.60 11.1730685679 -CF 2011-Feb-03 00:42:20 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 00:42:20 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Feb-03 00:42:20 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 00:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:42:36 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Feb-03 00:42:36 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2011-Feb-03 00:42:36 LOG4 lstwait: Finished waiting 1.14 seconds late 2011-Feb-03 00:42:36 INFO3 lstwait: Finished waiting 2011-Feb-03 00:42:36 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Feb-03 00:42:36 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Feb-03 00:42:36 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Feb-03 00:42:36 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Feb-03 00:42:36 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Feb-03 00:42:36 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Feb-03 00:42:36 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2011-Feb-03 00:42:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Feb-03 00:42:36 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Feb-03 00:42:36 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Feb-03 00:42:36 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Feb-03 00:42:36 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Feb-03 00:42:36 LOG3 take_mock_data: PSET configuration: object=AGES3193_p2_108 2011-Feb-03 00:42:36 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Feb-03 00:42:36 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Feb-03 00:42:36 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Feb-03 00:42:36 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Feb-03 00:42:36 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Feb-03 00:42:36 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Feb-03 00:42:36 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Feb-03 00:42:36 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Feb-03 00:42:36 LOG3 take_mock_data: PSET configuration: patternid=103400040 2011-Feb-03 00:42:36 LOG3 take_mock_data: PSET configuration: scanid=103400040 2011-Feb-03 00:42:36 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Feb-03 00:42:36 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Feb-03 00:42:36 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Feb-03 00:42:36 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456267312.0 2011-Feb-03 00:42:36 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306267312.0 2011-Feb-03 00:42:36 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Feb-03 00:42:36 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Feb-03 00:42:36 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGES3193_p2_108:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=103400040:scanid=103400040:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456267312.0:topobfreqhz=1306267312.0:filetype=1 2011-Feb-03 00:42:36 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Feb-03 00:42:36 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2011-Feb-03 00:42:36 LOG4 from_mock: From MOCK: psetok 2011-Feb-03 00:42:36 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Feb-03 00:42:36 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2011-Feb-03 00:42:36 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Feb-03 00:42:36 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Feb-03 00:42:36 LOG3 socket_wait: To MOCK: STAR1200 2011-Feb-03 00:42:36 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Feb-03 00:42:36 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2011-Feb-03 00:42:36 LOG4 from_mock: From MOCK: starok 2011-Feb-03 00:42:36 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Feb-03 00:42:36 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2011-Feb-03 00:42:36 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Feb-03 00:42:36 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 103400040 2011-Feb-03 00:42:37 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Feb-03 00:42:37 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2011-Feb-03 00:42:37 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Feb-03 00:42:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 00:42:37 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Feb-03 00:42:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Feb-03 00:42:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16958.00 2011-Feb-03 00:42:38 INFO2 got_mock_message: Mock spectrometer start file number is 00200 2011-Feb-03 00:42:38 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Feb-03 00:42:38 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1199.9 s 2011-Feb-03 00:42:38 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Feb-03 00:42:38 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Feb-03 00:42:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Feb-03 00:42:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2011-Feb-03 00:42:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Feb-03 00:42:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Feb-03 00:42:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Feb-03 00:42:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Feb-03 00:42:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Feb-03 00:42:38 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Feb-03 00:42:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.16 GB 2011-Feb-03 00:42:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.16 GB 2011-Feb-03 00:42:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.16 GB 2011-Feb-03 00:42:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.16 GB 2011-Feb-03 00:42:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.16 GB 2011-Feb-03 00:42:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.16 GB 2011-Feb-03 00:42:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.16 GB 2011-Feb-03 00:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.267312 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 00:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.267312 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.267312 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.267312 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.267312 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.267312 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.267312 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.267312 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.267312 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 00:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:42:41 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 00:42:41.01 2011-Feb-03 00:42:41 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1296708161.01 Thu Feb 3 00:42:41 2011 2011-Feb-03 00:42:41 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Feb-03 00:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.132 (still bad) 2011-Feb-03 00:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 00:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:42:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 00:42:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 1.063 1.060 0.909 2011-Feb-03 00:42:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 1.128 0.943 1.103 2011-Feb-03 00:42:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.945 0.892 0.957 1.100 2011-Feb-03 00:42:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.887 0.036 0.961 0.043 2011-Feb-03 00:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.132 (still bad) 2011-Feb-03 00:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.132 (still bad) 2011-Feb-03 00:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.131 (still bad) 2011-Feb-03 00:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.135 (still bad) 2011-Feb-03 00:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.132 (still bad) 2011-Feb-03 00:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.132 (still bad) 2011-Feb-03 00:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:43:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 00:43:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.956 1.060 1.062 0.909 2011-Feb-03 00:43:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.987 1.128 0.936 1.093 2011-Feb-03 00:43:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.995 0.935 0.957 1.102 2011-Feb-03 00:43:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.888 0.036 0.963 0.043 2011-Feb-03 00:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.136 (still bad) 2011-Feb-03 00:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.131 (still bad) 2011-Feb-03 00:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.134 (still bad) 2011-Feb-03 00:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.132 (still bad) 2011-Feb-03 00:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.132 (still bad) 2011-Feb-03 00:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:44:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 00:44:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.959 1.064 1.067 0.914 2011-Feb-03 00:44:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.991 1.132 0.940 1.101 2011-Feb-03 00:44:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.951 0.897 0.962 1.105 2011-Feb-03 00:44:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.888 0.036 0.962 0.043 2011-Feb-03 00:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.132 (still bad) 2011-Feb-03 00:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.133 (still bad) 2011-Feb-03 00:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.135 (still bad) 2011-Feb-03 00:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.132 (still bad) 2011-Feb-03 00:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:45:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 00:45:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.959 1.060 1.062 0.911 2011-Feb-03 00:45:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.987 1.126 0.936 1.097 2011-Feb-03 00:45:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.951 0.897 0.963 1.107 2011-Feb-03 00:45:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.887 0.036 0.962 0.043 2011-Feb-03 00:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.131 (still bad) 2011-Feb-03 00:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 00:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.126 (still bad) 2011-Feb-03 00:46:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 00:46:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.960 1.061 1.064 0.910 2011-Feb-03 00:46:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.989 1.126 0.936 1.094 2011-Feb-03 00:46:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.946 0.890 0.961 1.102 2011-Feb-03 00:46:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.885 0.036 0.961 0.043 2011-Feb-03 00:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 00:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.125 (still bad) 2011-Feb-03 00:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.126 (still bad) 2011-Feb-03 00:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 00:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 00:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.129 (still bad) 2011-Feb-03 00:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.132 (still bad) 2011-Feb-03 00:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 00:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.135 (still bad) 2011-Feb-03 00:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:47:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 00:47:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.959 1.061 1.061 0.909 2011-Feb-03 00:47:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.989 1.123 0.935 1.092 2011-Feb-03 00:47:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.945 0.890 0.963 1.105 2011-Feb-03 00:47:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.884 0.036 0.960 0.043 2011-Feb-03 00:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.135 (still bad) 2011-Feb-03 00:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.131 (still bad) 2011-Feb-03 00:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.133 (still bad) 2011-Feb-03 00:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 00:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.133 (still bad) 2011-Feb-03 00:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 00:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 00:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.132 (still bad) 2011-Feb-03 00:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 00:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.132 (still bad) 2011-Feb-03 00:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:48:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 00:48:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.962 1.063 1.064 0.913 2011-Feb-03 00:48:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.989 1.123 0.936 1.092 2011-Feb-03 00:48:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.948 0.893 0.962 1.105 2011-Feb-03 00:48:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.887 0.036 0.964 0.043 2011-Feb-03 00:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 00:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 00:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:49:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.132 (still bad) 2011-Feb-03 00:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:50:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 00:50:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.962 1.062 1.062 0.910 2011-Feb-03 00:50:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.990 1.130 0.936 1.092 2011-Feb-03 00:50:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.949 0.894 0.961 1.098 2011-Feb-03 00:50:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.886 0.036 0.962 0.043 2011-Feb-03 00:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.128 (still bad) 2011-Feb-03 00:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.134 (still bad) 2011-Feb-03 00:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.127 (still bad) 2011-Feb-03 00:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.131 (still bad) 2011-Feb-03 00:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.136 (still bad) 2011-Feb-03 00:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.138 (still bad) 2011-Feb-03 00:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.145 (still bad) 2011-Feb-03 00:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.143 (still bad) 2011-Feb-03 00:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.141 (still bad) 2011-Feb-03 00:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.139 (still bad) 2011-Feb-03 00:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.140 (still bad) 2011-Feb-03 00:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.137 (still bad) 2011-Feb-03 00:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.132 (still bad) 2011-Feb-03 00:51:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 00:51:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.960 1.058 1.065 0.913 2011-Feb-03 00:51:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.994 1.132 0.938 1.094 2011-Feb-03 00:51:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.949 0.893 0.958 1.097 2011-Feb-03 00:51:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.889 0.036 0.964 0.043 2011-Feb-03 00:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.131 (still bad) 2011-Feb-03 00:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.132 (still bad) 2011-Feb-03 00:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.132 (still bad) 2011-Feb-03 00:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.130 (still bad) 2011-Feb-03 00:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.131 (still bad) 2011-Feb-03 00:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.130 (still bad) 2011-Feb-03 00:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:52:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 00:52:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.955 1.058 1.061 0.908 2011-Feb-03 00:52:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.987 1.125 0.936 1.091 2011-Feb-03 00:52:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.945 0.891 0.956 1.095 2011-Feb-03 00:52:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.887 0.036 0.962 0.043 2011-Feb-03 00:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.127 (still bad) 2011-Feb-03 00:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.126 (still bad) 2011-Feb-03 00:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.131 (still bad) 2011-Feb-03 00:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 00:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.124 (still bad) 2011-Feb-03 00:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.124 (still bad) 2011-Feb-03 00:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 00:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:52:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:52:56 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.127 (still bad) 2011-Feb-03 00:52:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:53:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:53:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 00:53:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 1.059 1.060 0.908 2011-Feb-03 00:53:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.987 1.125 0.937 1.093 2011-Feb-03 00:53:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.945 0.889 0.955 1.094 2011-Feb-03 00:53:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.885 0.036 0.961 0.043 2011-Feb-03 00:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:53:08 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.125 (still bad) 2011-Feb-03 00:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 00:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 00:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.125 (still bad) 2011-Feb-03 00:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 00:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 00:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.123 (still bad) 2011-Feb-03 00:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 00:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 00:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 00:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.123 (still bad) 2011-Feb-03 00:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.123 (still bad) 2011-Feb-03 00:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 00:53:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:54:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:54:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 00:54:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 00:54:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.959 1.060 1.067 0.913 2011-Feb-03 00:54:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.987 1.125 0.936 1.092 2011-Feb-03 00:54:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.945 0.890 0.955 1.095 2011-Feb-03 00:54:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.886 0.036 0.961 0.042 2011-Feb-03 00:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:54:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:54:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 00:54:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 00:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.135 (still bad) 2011-Feb-03 00:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.132 (still bad) 2011-Feb-03 00:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 00:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:54:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.133 (still bad) 2011-Feb-03 00:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 00:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.131 (still bad) 2011-Feb-03 00:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.131 (still bad) 2011-Feb-03 00:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.132 (still bad) 2011-Feb-03 00:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:55:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.037 < 0.75)! 2011-Feb-03 00:55:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.960 1.067 1.065 0.912 2011-Feb-03 00:55:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.996 1.135 0.957 1.115 2011-Feb-03 00:55:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.953 0.899 0.965 1.103 2011-Feb-03 00:55:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.893 0.037 0.962 0.043 2011-Feb-03 00:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.131 (still bad) 2011-Feb-03 00:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.134 (still bad) 2011-Feb-03 00:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:55:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.134 (still bad) 2011-Feb-03 00:55:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.131 (still bad) 2011-Feb-03 00:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.131 (still bad) 2011-Feb-03 00:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:56:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 00:56:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.959 1.064 1.063 0.912 2011-Feb-03 00:56:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 1.127 0.937 1.093 2011-Feb-03 00:56:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.945 0.892 0.968 1.107 2011-Feb-03 00:56:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.887 0.036 0.963 0.043 2011-Feb-03 00:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.132 (still bad) 2011-Feb-03 00:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.131 (still bad) 2011-Feb-03 00:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.126 (still bad) 2011-Feb-03 00:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.131 (still bad) 2011-Feb-03 00:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.128 (still bad) 2011-Feb-03 00:57:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 00:57:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.956 1.060 1.064 0.910 2011-Feb-03 00:57:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.987 1.127 0.935 1.093 2011-Feb-03 00:57:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.948 0.893 0.957 1.095 2011-Feb-03 00:57:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.887 0.036 0.963 0.043 2011-Feb-03 00:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.132 (still bad) 2011-Feb-03 00:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.127 (still bad) 2011-Feb-03 00:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.135 (still bad) 2011-Feb-03 00:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.132 (still bad) 2011-Feb-03 00:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.141 (still bad) 2011-Feb-03 00:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.132 (still bad) 2011-Feb-03 00:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.132 (still bad) 2011-Feb-03 00:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.136 (still bad) 2011-Feb-03 00:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.132 (still bad) 2011-Feb-03 00:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.135 (still bad) 2011-Feb-03 00:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.139 (still bad) 2011-Feb-03 00:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.133 (still bad) 2011-Feb-03 00:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.135 (still bad) 2011-Feb-03 00:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.134 (still bad) 2011-Feb-03 00:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.137 (still bad) 2011-Feb-03 00:58:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 00:58:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 1.062 1.064 0.913 2011-Feb-03 00:58:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.993 1.131 0.935 1.094 2011-Feb-03 00:58:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.945 0.894 0.957 1.095 2011-Feb-03 00:58:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.886 0.036 0.962 0.043 2011-Feb-03 00:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.133 (still bad) 2011-Feb-03 00:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 00:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.131 (still bad) 2011-Feb-03 00:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.131 (still bad) 2011-Feb-03 00:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.134 (still bad) 2011-Feb-03 00:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.132 (still bad) 2011-Feb-03 00:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 00:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.134 (still bad) 2011-Feb-03 00:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 00:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 00:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:59:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 00:59:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.962 1.062 1.062 0.910 2011-Feb-03 00:59:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.988 1.126 0.937 1.095 2011-Feb-03 00:59:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.943 0.891 0.954 1.096 2011-Feb-03 00:59:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.886 0.036 0.962 0.042 2011-Feb-03 00:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 00:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.131 (still bad) 2011-Feb-03 00:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 00:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 00:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.132 (still bad) 2011-Feb-03 00:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 00:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.131 (still bad) 2011-Feb-03 00:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.135 (still bad) 2011-Feb-03 00:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.132 (still bad) 2011-Feb-03 00:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.134 (still bad) 2011-Feb-03 00:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.134 (still bad) 2011-Feb-03 00:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.131 (still bad) 2011-Feb-03 00:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.132 (still bad) 2011-Feb-03 00:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.132 (still bad) 2011-Feb-03 00:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.132 (still bad) 2011-Feb-03 00:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.135 (still bad) 2011-Feb-03 00:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.140 (still bad) 2011-Feb-03 00:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.145 (still bad) 2011-Feb-03 00:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.143 (still bad) 2011-Feb-03 00:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.145 (still bad) 2011-Feb-03 00:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.142 (still bad) 2011-Feb-03 01:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.135 (still bad) 2011-Feb-03 01:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.136 (still bad) 2011-Feb-03 01:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.133 (still bad) 2011-Feb-03 01:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.136 (still bad) 2011-Feb-03 01:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.150 (still bad) 2011-Feb-03 01:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.151 (still bad) 2011-Feb-03 01:00:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:00:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.962 1.064 1.068 0.915 2011-Feb-03 01:00:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.019 1.161 0.939 1.095 2011-Feb-03 01:00:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.950 0.895 0.960 1.096 2011-Feb-03 01:00:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.888 0.036 0.962 0.043 2011-Feb-03 01:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.174 (still bad) 2011-Feb-03 01:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.177 (still bad) 2011-Feb-03 01:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.178 (still bad) 2011-Feb-03 01:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.177 (still bad) 2011-Feb-03 01:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.167 (still bad) 2011-Feb-03 01:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.162 (still bad) 2011-Feb-03 01:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.152 (still bad) 2011-Feb-03 01:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.142 (still bad) 2011-Feb-03 01:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.137 (still bad) 2011-Feb-03 01:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.156 (still bad) 2011-Feb-03 01:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.195 (still bad) 2011-Feb-03 01:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.236 (still bad) 2011-Feb-03 01:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.260 (still bad) 2011-Feb-03 01:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.274 (still bad) 2011-Feb-03 01:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.272 (still bad) 2011-Feb-03 01:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.249 (still bad) 2011-Feb-03 01:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.217 (still bad) 2011-Feb-03 01:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.181 (still bad) 2011-Feb-03 01:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.141 (still bad) 2011-Feb-03 01:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 01:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.139 (still bad) 2011-Feb-03 01:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.137 (still bad) 2011-Feb-03 01:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.158 (still bad) 2011-Feb-03 01:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.182 (still bad) 2011-Feb-03 01:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.200 (still bad) 2011-Feb-03 01:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.213 (still bad) 2011-Feb-03 01:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.219 (still bad) 2011-Feb-03 01:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.201 (still bad) 2011-Feb-03 01:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.180 (still bad) 2011-Feb-03 01:01:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:01:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.966 1.067 1.066 0.911 2011-Feb-03 01:01:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.993 1.133 0.935 1.094 2011-Feb-03 01:01:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.947 0.891 1.017 1.158 2011-Feb-03 01:01:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.891 0.036 0.967 0.043 2011-Feb-03 01:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.138 (still bad) 2011-Feb-03 01:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.131 (still bad) 2011-Feb-03 01:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.136 (still bad) 2011-Feb-03 01:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.134 (still bad) 2011-Feb-03 01:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 01:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.135 (still bad) 2011-Feb-03 01:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 01:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 01:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.134 (still bad) 2011-Feb-03 01:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 01:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 01:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 01:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 01:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.131 (still bad) 2011-Feb-03 01:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.132 (still bad) 2011-Feb-03 01:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 01:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 01:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 01:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 01:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 01:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.131 (still bad) 2011-Feb-03 01:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 01:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 01:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 01:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 01:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 01:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.133 (still bad) 2011-Feb-03 01:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 01:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 01:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 01:02:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:02:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.962 1.066 1.066 0.912 2011-Feb-03 01:02:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.989 1.125 0.936 1.092 2011-Feb-03 01:02:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.944 0.891 0.958 1.096 2011-Feb-03 01:02:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.885 0.036 0.963 0.042 2011-Feb-03 01:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 01:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.128 (still bad) 2011-Feb-03 01:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 01:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 01:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 01:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.131 (still bad) 2011-Feb-03 01:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 01:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.126 (still bad) 2011-Feb-03 01:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 01:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 01:02:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 01:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 01:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 01:02:42 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Feb-03 01:02:42 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Feb-03 01:02:42 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Feb-03 01:02:42 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2011-Feb-03 01:02:42 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Feb-03 01:02:42 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2011-Feb-03 01:02:42 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Feb-03 01:02:42 LOG5 finish_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2011-Feb-03 01:02:42 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Feb-03 01:02:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Feb-03 01:02:42 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Feb-03 01:02:42 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2011-Feb-03 01:02:42 COMMAND run_command_line: EXECUTING command 37: 'ENDIF' 2011-Feb-03 01:02:42 COMMAND run_command_line: EXECUTING command 40: 'IF LSTSLEW(AGES3193_p2_112) < 093038 THEN' 2011-Feb-03 01:02:42 LOG3 is_if_valid: Current source data: up 245.0 6.7 UP - - 108 1.9 2011-Feb-03 01:02:42 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p2_112) < 093038 2011-Feb-03 01:02:42 INFO5 is_if_valid: Condition parsed as: 9.4949686666666668 < 9.5105555555555554 2011-Feb-03 01:02:42 COMMAND run_command_line: EXECUTING command 41: 'FIXEDDRIFT az=242.56 alfaangle=-41.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_112 ra=95300.00 dec=210630.00' 2011-Feb-03 01:02:42 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Feb-03 01:02:42 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Feb-03 01:02:42 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 242.56 -41.8 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p2_112 95300.00 210630.00 J 8500.0 Heliocentric velocity(optical)' 2011-Feb-03 01:02:42 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Feb-03 01:02:43 LOG5 begin_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2011-Feb-03 01:02:43 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p2_108' 2011-Feb-03 01:02:43 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Feb-03 01:02:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_112} 2011-Feb-03 01:02:43 INFO3 fixed_driftmap: Sending telescope to Az = 242.56 and ZA = 6.05 2011-Feb-03 01:02:43 LOG3 track_source: Calling 'track_source AGES3193_p2_112 242.56 6.0480710584 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Feb-03 01:02:43 START begin_task: Starting task 'sending tracking commands' 2011-Feb-03 01:02:43 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2011-Feb-03 01:02:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_112} INFO {Slewing to source 'AGES3193_p2_112' ...} 2011-Feb-03 01:02:43 INFO1 track_source: Starting to track AGES3193_p2_112 2011-Feb-03 01:02:43 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_112" 2011-Feb-03 01:02:43 LOG3 vw_send: To DATATAKING: set ra 242.56 2011-Feb-03 01:02:43 LOG3 vw_send: To DATATAKING: set dec 6.0480710584 2011-Feb-03 01:02:43 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Feb-03 01:02:43 LOG3 vw_send: To DATATAKING: pnt tr 242.56 6.0480710584 -CF 2011-Feb-03 01:02:43 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 01:02:43 STOP finish_task: Finishing task 'sending tracking commands' 2011-Feb-03 01:02:43 LOG5 finish_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2011-Feb-03 01:02:43 INFO2 finish_task: DONE finished sending: tracking commands 2011-Feb-03 01:02:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 01:02:43 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Feb-03 01:02:43 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2011-Feb-03 01:02:43 START begin_task: Starting task 'rotate ALFA to -41.8 degrees' 2011-Feb-03 01:02:43 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2011-Feb-03 01:02:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -41.8 degrees ...} 2011-Feb-03 01:02:43 INFO2 rotate_alfa: ALFA commanded to -41.8 degrees 2011-Feb-03 01:02:43 LOG3 sock_errsend: To ALFAMOTOR: POSITION -41.8 REPLY 2011-Feb-03 01:02:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Feb-03 01:02:43 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Feb-03 01:02:43 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2011-Feb-03 01:02:43 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_112" 2011-Feb-03 01:02:43 LOG4 got_cormsg: From DATATAKING: set ra 242.56 2011-Feb-03 01:02:43 LOG4 got_cormsg: From DATATAKING: set dec 6.0480710584 2011-Feb-03 01:02:43 LOG4 got_cormsg: From DATATAKING: vw% 242.56 2011-Feb-03 01:02:43 LOG4 got_cormsg: From DATATAKING: vw% 6.0480710584 2011-Feb-03 01:02:43 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 01:02:43 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Feb-03 01:02:43 LOG4 got_cormsg: From DATATAKING: pnt tr 242.56 6.0480710584 -CF 2011-Feb-03 01:02:43 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 01:02:43 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2011-Feb-03 01:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 01:02:52 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Feb-03 01:02:52 INFO3 alfa_motor: ALFA rotator in-position -41.80 degrees 2011-Feb-03 01:02:52 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Feb-03 01:02:52 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2011-Feb-03 01:02:52 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Feb-03 01:02:52 STOP finish_task: Finishing task 'rotate ALFA to -41.8 degrees' 2011-Feb-03 01:02:52 LOG5 finish_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2011-Feb-03 01:02:52 INFO2 finish_task: DONE finished configuration: rotating ALFA to -41.8 degrees 2011-Feb-03 01:02:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 01:02:53 STOP end_task: Finishing task 'rotate ALFA to -41.8 degrees' with status 'OK' 2011-Feb-03 01:02:53 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2011-Feb-03 01:02:53 START begin_task: Starting task 'waiting on telescope' 2011-Feb-03 01:02:53 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2011-Feb-03 01:02:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Feb-03 01:02:53 LOG3 waittrk: Start waittrk 5 2011-Feb-03 01:02:53 START begin_task: Starting task 'waiting on telescope movement' 2011-Feb-03 01:02:53 LOG5 begin_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2011-Feb-03 01:02:58 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Feb-03 01:02:58 LOG5 end_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2011-Feb-03 01:02:58 START begin_task: Starting task 'waiting on telescope on source' 2011-Feb-03 01:02:58 LOG5 begin_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2011-Feb-03 01:04:56 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Feb-03 01:04:56 LOG5 end_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2011-Feb-03 01:04:56 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Feb-03 01:04:56 INFO2 waittrk: Now tracking AGES3193_p2_112 2011-Feb-03 01:04:56 LOG4 waittrk: Current telescope position: Az = 241.98 ZA = 6.05 2011-Feb-03 01:04:56 STOP finish_task: Finishing task 'waiting on telescope' 2011-Feb-03 01:04:56 LOG5 finish_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2011-Feb-03 01:04:56 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Feb-03 01:04:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 01:04:56 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Feb-03 01:04:56 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2011-Feb-03 01:04:56 START begin_task: Starting task 'selecting calibration type' 2011-Feb-03 01:04:56 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2011-Feb-03 01:04:56 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Feb-03 01:04:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Feb-03 01:04:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 01:04:56 START begin_task: Starting task 'waiting on setcal' 2011-Feb-03 01:04:56 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2011-Feb-03 01:04:56 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Feb-03 01:04:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 01:04:57 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 01:04:57 LOG4 got_cormsg: From DATATAKING: DONE 2011-Feb-03 01:04:57 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Feb-03 01:04:57 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2011-Feb-03 01:04:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Feb-03 01:04:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Feb-03 01:04:57 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Feb-03 01:04:57 START begin_task: Starting task 'waiting on command to ALFA' 2011-Feb-03 01:04:57 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2011-Feb-03 01:04:57 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 01:04:57 LOG4 got_alfamon: From ALFAMON: ACK 2011-Feb-03 01:04:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Feb-03 01:04:57 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2011-Feb-03 01:04:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Feb-03 01:04:57 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Feb-03 01:04:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Feb-03 01:04:57 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Feb-03 01:04:57 START begin_task: Starting task 'waiting on command to ALFA' 2011-Feb-03 01:04:57 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2011-Feb-03 01:04:57 LOG4 got_alfamon: From ALFAMON: ACK 2011-Feb-03 01:04:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Feb-03 01:04:57 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2011-Feb-03 01:04:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Feb-03 01:04:57 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Feb-03 01:04:57 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Feb-03 01:04:57 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2011-Feb-03 01:04:57 LOG5 dopset_later: Calling 'dopset_later 35.263566425606186' 2011-Feb-03 01:04:57 INFO3 dopset_later: Setting Doppler correction for 01:05:32 (35.3 seconds from now) 2011-Feb-03 01:04:57 LOG5 antvel: Calling 'antvel 242.560000 6.048071 F Heliocentric 35.263566425606186' 2011-Feb-03 01:04:57 LOG2 antvel: Transforming current Az = 242.56 ZA = 6.05 to apparent RA = 09:53:39.6 Dec = +21:03:07.1 2011-Feb-03 01:04:57 LOG2 antvel: Parameters to Doppler: Heliocentric 18332 2011 34 0.0 2011-Feb-03 01:04:57 INFO5 antvel: Computed antenna velocity: -5.15373 km/s 2011-Feb-03 01:04:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-5.1537339349 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Feb-03 01:04:57 INFO4 dopset_gen: New sky frequencies: 1381.267174 1381.267174 1381.267174 1381.267174 1381.267174 1381.267174 1381.267174 1381.267174 1381.267174 2011-Feb-03 01:04:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.267174 sky0=1381.267174 sky1=1381.267174 sky2=1381.267174 sky3=1381.267174 sky4=1381.267174 sky5=1381.267174 sky6=1381.267174 sky7=1381.267174 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 01:04:57 LOG2 dopset_gen: Result from 'sky2syn': 1631.267174 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 01:04:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631267174.0} 2011-Feb-03 01:04:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 01:04:57 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Feb-03 01:04:57 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Feb-03 01:04:57 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:30.3 Dec = +21:06:16.1 2011-Feb-03 01:04:57 LOG3 track_source: Calling 'track_source AGES3193_p2_112 095230.3 210616.1 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Feb-03 01:04:57 START begin_task: Starting task 'sending tracking commands' 2011-Feb-03 01:04:57 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2011-Feb-03 01:04:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_112} INFO {Slewing to source 'AGES3193_p2_112' ...} 2011-Feb-03 01:04:57 INFO1 track_source: Starting to track AGES3193_p2_112 2011-Feb-03 01:04:57 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_112" 2011-Feb-03 01:04:57 LOG3 vw_send: To DATATAKING: set ra 095230.3 2011-Feb-03 01:04:57 LOG3 vw_send: To DATATAKING: set dec 210616.1 2011-Feb-03 01:04:57 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Feb-03 01:04:57 LOG3 vw_send: To DATATAKING: pnt tr 095230.3 210616.1 -CJ 2011-Feb-03 01:04:57 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 01:04:57 STOP finish_task: Finishing task 'sending tracking commands' 2011-Feb-03 01:04:57 LOG5 finish_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2011-Feb-03 01:04:57 INFO2 finish_task: DONE finished sending: tracking commands 2011-Feb-03 01:04:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 01:04:58 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Feb-03 01:04:58 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2011-Feb-03 01:04:58 START begin_task: Starting task 'waiting on telescope' 2011-Feb-03 01:04:58 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2011-Feb-03 01:04:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Feb-03 01:04:58 LOG3 waittrk: Start waittrk 5 2011-Feb-03 01:04:58 START begin_task: Starting task 'waiting on telescope movement' 2011-Feb-03 01:04:58 LOG5 begin_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2011-Feb-03 01:04:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631267174.0} 2011-Feb-03 01:04:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 01:04:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 01:04:58 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_112" 2011-Feb-03 01:04:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 01:04:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 01:04:58 LOG4 got_cormsg: From DATATAKING: set ra 095230.3 2011-Feb-03 01:04:58 LOG4 got_cormsg: From DATATAKING: set dec 210616.1 2011-Feb-03 01:04:58 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Feb-03 01:04:58 LOG4 got_cormsg: From DATATAKING: pnt tr 095230.3 210616.1 -CJ 2011-Feb-03 01:04:58 LOG4 got_cormsg: From DATATAKING: 095230.3 2011-Feb-03 01:04:58 LOG4 got_cormsg: From DATATAKING: vw% 210616.1 2011-Feb-03 01:04:58 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2011-Feb-03 01:04:58 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 01:04:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 01:05:03 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Feb-03 01:05:03 LOG5 end_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2011-Feb-03 01:05:03 START begin_task: Starting task 'waiting on telescope on source' 2011-Feb-03 01:05:03 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2011-Feb-03 01:05:06 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Feb-03 01:05:06 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2011-Feb-03 01:05:06 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Feb-03 01:05:06 INFO2 waittrk: Now tracking AGES3193_p2_112 2011-Feb-03 01:05:06 LOG4 waittrk: Current telescope position: Az = 241.94 ZA = 6.03 2011-Feb-03 01:05:06 STOP finish_task: Finishing task 'waiting on telescope' 2011-Feb-03 01:05:06 LOG5 finish_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2011-Feb-03 01:05:06 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Feb-03 01:05:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 01:05:06 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Feb-03 01:05:06 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2011-Feb-03 01:05:06 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Feb-03 01:05:06 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2011-Feb-03 01:05:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Feb-03 01:05:06 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Feb-03 01:05:06 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Feb-03 01:05:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Feb-03 01:05:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 01:05:06 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Feb-03 01:05:06 LOG5 begin_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2011-Feb-03 01:05:06 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Feb-03 01:05:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 01:05:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 01:05:09 LOG4 got_cormsg: From DATATAKING: DONE 2011-Feb-03 01:05:09 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Feb-03 01:05:09 LOG5 end_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2011-Feb-03 01:05:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Feb-03 01:05:09 START begin_task: Starting task 'adjusting WAPP power' 2011-Feb-03 01:05:09 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2011-Feb-03 01:05:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Feb-03 01:05:09 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Feb-03 01:05:09 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Feb-03 01:05:09 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Feb-03 01:05:09 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Feb-03 01:05:09 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Feb-03 01:05:09 LOG5 begin_task: Level: (5) ID = <10167> Status = 0 0 0 0 ok 2011-Feb-03 01:05:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Feb-03 01:05:09 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 01:05:09 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 7 dB 2011-Feb-03 01:05:09 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 3 3 dB 2011-Feb-03 01:05:10 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2011-Feb-03 01:05:10 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 4 0 dB 2011-Feb-03 01:05:10 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Feb-03 01:05:10 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Feb-03 01:05:10 LOG5 end_task: Level: (5) ID = <10167> Status = 0 0 0 0 ok 2011-Feb-03 01:05:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.938 1.040 ALFA beam 1: 1.038 0.892 2011-Feb-03 01:05:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.961 1.117 ALFA beam 3: 0.925 1.070 2011-Feb-03 01:05:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.929 0.862 ALFA beam 5: 0.914 1.042 2011-Feb-03 01:05:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.068 0.036 ALFA beam 7: 0.929 0.043 2011-Feb-03 01:05:10 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Feb-03 01:05:10 LOG5 finish_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2011-Feb-03 01:05:10 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Feb-03 01:05:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 01:05:10 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Feb-03 01:05:10 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2011-Feb-03 01:05:10 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Feb-03 01:05:10 LOG5 begin_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2011-Feb-03 01:05:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Feb-03 01:05:10 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Feb-03 01:05:10 LOG3 socket_wait: To MOCK: ADJP30 2011-Feb-03 01:05:10 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Feb-03 01:05:10 LOG5 begin_task: Level: (5) ID = <10169> Status = 0 0 0 0 ok 2011-Feb-03 01:05:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:05:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 1.040 1.038 0.892 2011-Feb-03 01:05:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.961 1.117 0.925 1.070 2011-Feb-03 01:05:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.929 0.862 0.914 1.042 2011-Feb-03 01:05:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.036 0.929 0.043 2011-Feb-03 01:05:16 INFO3 from_mock: From MOCK: b0s0g0 rms:A 32.6 28.7 B 29.8 29.8 mn:A 0.0 -0.1 B 0.8 0.6 gn: 10 10 2011-Feb-03 01:05:16 INFO3 from_mock: From MOCK: b0s1g0 rms:A 29.4 28.1 B 25.6 27.0 mn:A 0.3 -0.2 B 0.4 0.2 gn: 10 9 2011-Feb-03 01:05:16 INFO3 from_mock: From MOCK: b1s0g0 rms:A 31.2 29.3 B 30.0 26.9 mn:A -0.4 -0.2 B 0.2 -0.1 gn: 9 9 2011-Feb-03 01:05:16 INFO3 from_mock: From MOCK: b1s1g0 rms:A 30.1 27.8 B 27.9 27.9 mn:A -0.1 -0.4 B 0.5 -0.1 gn: 9 8 2011-Feb-03 01:05:16 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.6 28.7 B 30.0 31.3 mn:A -0.2 -0.4 B 0.1 -0.1 gn: 10 11 2011-Feb-03 01:05:16 INFO3 from_mock: From MOCK: b2s1g0 rms:A 27.9 28.1 B 28.4 26.3 mn:A 0.1 -0.1 B -0.1 0.1 gn: 10 10 2011-Feb-03 01:05:16 INFO3 from_mock: From MOCK: b3s0g0 rms:A 30.4 30.2 B 30.1 26.8 mn:A 0.6 -0.0 B 0.1 -0.2 gn: 11 11 2011-Feb-03 01:05:16 INFO3 from_mock: From MOCK: b3s1g0 rms:A 25.9 25.2 B 24.5 25.5 mn:A 0.2 0.8 B 0.6 -0.2 gn: 9 9 2011-Feb-03 01:05:16 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.2 29.3 B 29.8 30.0 mn:A -0.1 -0.2 B 0.2 -0.5 gn: 10 14 2011-Feb-03 01:05:16 INFO3 from_mock: From MOCK: b4s1g0 rms:A 30.5 27.6 B 27.8 26.8 mn:A 0.1 -0.3 B -0.2 -0.7 gn: 11 16 2011-Feb-03 01:05:16 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.0 28.5 B 30.6 30.5 mn:A 0.2 -0.0 B 0.3 0.4 gn: 12 12 2011-Feb-03 01:05:16 INFO3 from_mock: From MOCK: b5s1g0 rms:A 25.2 24.6 B 25.9 26.0 mn:A -0.0 -0.1 B -0.1 0.1 gn: 10 9 2011-Feb-03 01:05:16 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.3 29.7 B 29.2 30.0 mn:A 0.0 -0.8 B 0.3 -0.5 gn: 12 29 2011-Feb-03 01:05:16 INFO3 from_mock: From MOCK: b6s1g0 rms:A 29.6 26.9 B 29.4 28.5 mn:A -0.6 0.6 B -0.2 -0.1 gn: 12 31 2011-Feb-03 01:05:16 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Feb-03 01:05:16 LOG5 end_task: Level: (5) ID = <10169> Status = 0 0 0 0 ok 2011-Feb-03 01:05:16 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Feb-03 01:05:16 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Feb-03 01:05:16 LOG5 finish_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2011-Feb-03 01:05:16 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Feb-03 01:05:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 01:05:17 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Feb-03 01:05:17 LOG5 end_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2011-Feb-03 01:05:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Feb-03 01:05:17 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Feb-03 01:05:17 LOG5 finish_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2011-Feb-03 01:05:17 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Feb-03 01:05:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 01:05:17 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Feb-03 01:05:17 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2011-Feb-03 01:05:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel Cabrera 2011-Feb-03 01:05:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel Cabrera 2011-Feb-03 01:05:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel Cabrera 2011-Feb-03 01:05:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel Cabrera 2011-Feb-03 01:05:17 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Feb-03 01:05:17 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Feb-03 01:05:17 LOG5 begin_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2011-Feb-03 01:05:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Feb-03 01:05:17 START begin_task: Starting task 'selecting calibration type' 2011-Feb-03 01:05:17 LOG5 begin_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2011-Feb-03 01:05:17 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Feb-03 01:05:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Feb-03 01:05:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 01:05:17 START begin_task: Starting task 'waiting on setcal' 2011-Feb-03 01:05:17 LOG5 begin_task: Level: (5) ID = <10172> Status = 0 0 0 0 ok 2011-Feb-03 01:05:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2011-Feb-03 01:05:17 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Feb-03 01:05:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 01:05:17 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 01:05:17 LOG4 got_cormsg: From DATATAKING: DONE 2011-Feb-03 01:05:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Feb-03 01:05:17 LOG5 end_task: Level: (5) ID = <10172> Status = 0 0 0 0 ok 2011-Feb-03 01:05:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Feb-03 01:05:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Feb-03 01:05:17 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Feb-03 01:05:17 START begin_task: Starting task 'waiting on command to ALFA' 2011-Feb-03 01:05:17 LOG5 begin_task: Level: (5) ID = <10173> Status = 0 0 0 0 ok 2011-Feb-03 01:05:17 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 01:05:17 LOG4 got_alfamon: From ALFAMON: ACK 2011-Feb-03 01:05:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Feb-03 01:05:17 LOG5 end_task: Level: (5) ID = <10173> Status = 0 0 0 0 ok 2011-Feb-03 01:05:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Feb-03 01:05:17 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Feb-03 01:05:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Feb-03 01:05:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Feb-03 01:05:17 START begin_task: Starting task 'waiting on command to ALFA' 2011-Feb-03 01:05:17 LOG5 begin_task: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2011-Feb-03 01:05:17 LOG4 got_alfamon: From ALFAMON: ACK 2011-Feb-03 01:05:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Feb-03 01:05:17 LOG5 end_task: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2011-Feb-03 01:05:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Feb-03 01:05:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Feb-03 01:05:17 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Feb-03 01:05:17 LOG5 end_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2011-Feb-03 01:05:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Feb-03 01:05:17 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Feb-03 01:05:17 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Feb-03 01:05:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Feb-03 01:05:17 LOG5 begin_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2011-Feb-03 01:05:17 LOG3 CALCONTROL-caltrig: Software trigger 2011-Feb-03 01:05:17 NOTE WAPPDATA-new_file: New FITS file: wapp.20110203.a2048.0002.fits 2011-Feb-03 01:05:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Feb-03 01:05:17 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20110203.a2048.0002.fits} 2011-Feb-03 01:05:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Feb-03 01:05:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Feb-03 01:05:18 LOG5 end_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2011-Feb-03 01:05:18 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Feb-03 01:05:18 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Feb-03 01:05:18 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2011-Feb-03 01:05:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Feb-03 01:05:18 LOG5 log_alfabeam: Parameters: 9.8750833333333343 21.104472222222224 9.506754 2011.0932110490023 -41.800007 2011-Feb-03 01:05:18 LOG4 log_alfabeam: ALFABEAM 0 9.875083333333336 21.104472222222224 2011-Feb-03 01:05:18 LOG4 log_alfabeam: ALFABEAM 1 9.875588613415250 21.011963118525692 2011-Feb-03 01:05:18 LOG4 log_alfabeam: ALFABEAM 2 9.881776486876594 21.073194998770003 2011-Feb-03 01:05:18 LOG4 log_alfabeam: ALFABEAM 3 9.881207759561535 21.167046658115627 2011-Feb-03 01:05:18 LOG4 log_alfabeam: ALFABEAM 4 9.874466693271456 21.197300740179568 2011-Feb-03 01:05:18 LOG4 log_alfabeam: ALFABEAM 5 9.868387948670174 21.133902739570605 2011-Feb-03 01:05:18 LOG4 log_alfabeam: ALFABEAM 6 9.868940096396813 21.042407382255604 2011-Feb-03 01:05:18 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Feb-03 01:05:18 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Feb-03 01:05:18 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Feb-03 01:05:18 LOG3 take_mock_data: PSET configuration: object=AGES3193_p2_112 2011-Feb-03 01:05:18 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Feb-03 01:05:18 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Feb-03 01:05:18 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Feb-03 01:05:18 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Feb-03 01:05:18 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Feb-03 01:05:18 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Feb-03 01:05:18 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Feb-03 01:05:18 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Feb-03 01:05:18 LOG3 take_mock_data: PSET configuration: patternid=103400040 2011-Feb-03 01:05:18 LOG3 take_mock_data: PSET configuration: scanid=103400041 2011-Feb-03 01:05:18 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Feb-03 01:05:18 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Feb-03 01:05:18 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Feb-03 01:05:18 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456267174.0 2011-Feb-03 01:05:18 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306267174.0 2011-Feb-03 01:05:18 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Feb-03 01:05:18 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Feb-03 01:05:18 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGES3193_p2_112:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=103400040:scanid=103400041:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456267174.0:topobfreqhz=1306267174.0:filetype=1 2011-Feb-03 01:05:18 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Feb-03 01:05:18 LOG5 begin_task: Level: (5) ID = <10177> Status = 0 0 0 0 ok 2011-Feb-03 01:05:18 LOG4 from_mock: From MOCK: psetok 2011-Feb-03 01:05:18 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Feb-03 01:05:18 LOG5 end_task: Level: (5) ID = <10177> Status = 0 0 0 0 ok 2011-Feb-03 01:05:18 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Feb-03 01:05:18 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Feb-03 01:05:18 LOG3 socket_wait: To MOCK: STAR5 2011-Feb-03 01:05:18 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Feb-03 01:05:18 LOG5 begin_task: Level: (5) ID = <10178> Status = 0 0 0 0 ok 2011-Feb-03 01:05:18 LOG4 from_mock: From MOCK: starok 2011-Feb-03 01:05:18 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Feb-03 01:05:18 LOG5 end_task: Level: (5) ID = <10178> Status = 0 0 0 0 ok 2011-Feb-03 01:05:18 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Feb-03 01:05:18 INFO2 take_data: Starting WAPP+Mock 5-second scan: 103400041 2011-Feb-03 01:05:18 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Feb-03 01:05:18 LOG5 begin_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2011-Feb-03 01:05:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 01:05:18 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Feb-03 01:05:18 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Feb-03 01:05:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Feb-03 01:05:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18319.00 2011-Feb-03 01:05:20 INFO2 got_mock_message: Mock spectrometer start file number is 00300 2011-Feb-03 01:05:20 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Feb-03 01:05:20 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Feb-03 01:05:20 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Feb-03 01:05:20 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Feb-03 01:05:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Feb-03 01:05:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2011-Feb-03 01:05:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Feb-03 01:05:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Feb-03 01:05:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Feb-03 01:05:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Feb-03 01:05:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Feb-03 01:05:20 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Feb-03 01:05:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2011-Feb-03 01:05:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2011-Feb-03 01:05:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2011-Feb-03 01:05:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2011-Feb-03 01:05:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2011-Feb-03 01:05:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2011-Feb-03 01:05:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2011-Feb-03 01:05:23 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 01:05:23.01 2011-Feb-03 01:05:23 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1296709523.01 Thu Feb 3 01:05:23 2011 2011-Feb-03 01:05:23 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Feb-03 01:05:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.267174 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 01:05:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.267174 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:05:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.267174 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:05:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.267174 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:05:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.267174 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:05:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.267174 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:05:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.267174 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:05:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.267174 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:05:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.267174 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.500 (still bad) 2011-Feb-03 01:05:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 01:05:29 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Feb-03 01:05:29 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Feb-03 01:05:29 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Feb-03 01:05:29 LOG5 end_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2011-Feb-03 01:05:29 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Feb-03 01:05:29 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2011-Feb-03 01:05:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Feb-03 01:05:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Feb-03 01:05:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Feb-03 01:05:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Feb-03 01:05:29 LOG5 begin_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2011-Feb-03 01:05:29 LOG3 CALCONTROL-caltrig: Software trigger 2011-Feb-03 01:05:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Feb-03 01:05:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Feb-03 01:05:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Feb-03 01:05:29 LOG5 end_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2011-Feb-03 01:05:29 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Feb-03 01:05:29 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Feb-03 01:05:29 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2011-Feb-03 01:05:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Feb-03 01:05:29 LOG5 log_alfabeam: Parameters: 9.8750833333333343 21.104472222222224 9.509818 2011.0932113975714 -41.800007 2011-Feb-03 01:05:29 LOG4 log_alfabeam: ALFABEAM 0 9.875083333333336 21.104472222222231 2011-Feb-03 01:05:29 LOG4 log_alfabeam: ALFABEAM 1 9.875610811104863 21.011988886366158 2011-Feb-03 01:05:29 LOG4 log_alfabeam: ALFABEAM 2 9.881784084211528 21.073509178084738 2011-Feb-03 01:05:29 LOG4 log_alfabeam: ALFABEAM 3 9.881192374708187 21.167340780128878 2011-Feb-03 01:05:29 LOG4 log_alfabeam: ALFABEAM 4 9.874443666805904 21.197271702703031 2011-Feb-03 01:05:29 LOG4 log_alfabeam: ALFABEAM 5 9.868380819580480 21.133576787964401 2011-Feb-03 01:05:29 LOG4 log_alfabeam: ALFABEAM 6 9.868955198844509 21.042116004009351 2011-Feb-03 01:05:29 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Feb-03 01:05:29 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Feb-03 01:05:29 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Feb-03 01:05:29 LOG3 take_mock_data: PSET configuration: object=AGES3193_p2_112 2011-Feb-03 01:05:29 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Feb-03 01:05:29 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Feb-03 01:05:29 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Feb-03 01:05:29 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Feb-03 01:05:29 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Feb-03 01:05:29 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Feb-03 01:05:29 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Feb-03 01:05:29 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Feb-03 01:05:29 LOG3 take_mock_data: PSET configuration: patternid=103400040 2011-Feb-03 01:05:29 LOG3 take_mock_data: PSET configuration: scanid=103400042 2011-Feb-03 01:05:29 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Feb-03 01:05:29 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Feb-03 01:05:29 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Feb-03 01:05:29 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456267174.0 2011-Feb-03 01:05:29 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306267174.0 2011-Feb-03 01:05:29 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Feb-03 01:05:29 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Feb-03 01:05:29 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGES3193_p2_112:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=103400040:scanid=103400042:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456267174.0:topobfreqhz=1306267174.0:filetype=1 2011-Feb-03 01:05:29 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Feb-03 01:05:29 LOG5 begin_task: Level: (5) ID = <10182> Status = 0 0 0 0 ok 2011-Feb-03 01:05:29 LOG4 from_mock: From MOCK: psetok 2011-Feb-03 01:05:29 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Feb-03 01:05:29 LOG5 end_task: Level: (5) ID = <10182> Status = 0 0 0 0 ok 2011-Feb-03 01:05:29 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Feb-03 01:05:29 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Feb-03 01:05:29 LOG3 socket_wait: To MOCK: STAR5 2011-Feb-03 01:05:29 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Feb-03 01:05:29 LOG5 begin_task: Level: (5) ID = <10183> Status = 0 0 0 0 ok 2011-Feb-03 01:05:29 LOG4 from_mock: From MOCK: starok 2011-Feb-03 01:05:29 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Feb-03 01:05:29 LOG5 end_task: Level: (5) ID = <10183> Status = 0 0 0 0 ok 2011-Feb-03 01:05:29 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Feb-03 01:05:29 INFO2 take_data: Starting WAPP+Mock 5-second scan: 103400042 2011-Feb-03 01:05:29 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Feb-03 01:05:29 LOG5 begin_task: Level: (5) ID = <10184> Status = 0 0 0 0 ok 2011-Feb-03 01:05:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 01:05:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18330.00 2011-Feb-03 01:05:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Feb-03 01:05:30 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Feb-03 01:05:30 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Feb-03 01:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.551 (still bad) 2011-Feb-03 01:05:31 INFO2 got_mock_message: Mock spectrometer start file number is 00400 2011-Feb-03 01:05:31 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Feb-03 01:05:31 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Feb-03 01:05:31 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Feb-03 01:05:31 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Feb-03 01:05:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Feb-03 01:05:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2011-Feb-03 01:05:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Feb-03 01:05:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Feb-03 01:05:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Feb-03 01:05:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Feb-03 01:05:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Feb-03 01:05:32 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Feb-03 01:05:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2011-Feb-03 01:05:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2011-Feb-03 01:05:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2011-Feb-03 01:05:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2011-Feb-03 01:05:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2011-Feb-03 01:05:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2011-Feb-03 01:05:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2011-Feb-03 01:05:35 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 01:05:35.01 2011-Feb-03 01:05:35 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1296709535.01 Thu Feb 3 01:05:35 2011 2011-Feb-03 01:05:35 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Feb-03 01:05:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.267174 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 01:05:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.267174 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:05:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.267174 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:05:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.267174 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:05:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.267174 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:05:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.267174 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:05:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.267174 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:05:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.267174 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:05:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.267174 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:05:35 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Feb-03 01:05:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 01:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:05:41 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Feb-03 01:05:41 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Feb-03 01:05:41 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Feb-03 01:05:41 LOG5 end_task: Level: (5) ID = <10184> Status = 0 0 0 0 ok 2011-Feb-03 01:05:41 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Feb-03 01:05:41 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2011-Feb-03 01:05:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Feb-03 01:05:41 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Feb-03 01:05:41 LOG5 finish_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2011-Feb-03 01:05:41 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Feb-03 01:05:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 01:05:41 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Feb-03 01:05:41 LOG5 end_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2011-Feb-03 01:05:41 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Feb-03 01:05:41 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 242.56 and ZA = 6.05 2011-Feb-03 01:05:41 LOG3 track_source: Calling 'track_source AGES3193_p2_112 242.56 6.0480710584 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Feb-03 01:05:41 START begin_task: Starting task 'sending tracking commands' 2011-Feb-03 01:05:41 LOG5 begin_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2011-Feb-03 01:05:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_112} INFO {Slewing to source 'AGES3193_p2_112' ...} 2011-Feb-03 01:05:41 INFO1 track_source: Starting to track AGES3193_p2_112 2011-Feb-03 01:05:41 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_112" 2011-Feb-03 01:05:41 LOG3 vw_send: To DATATAKING: set ra 242.56 2011-Feb-03 01:05:41 LOG3 vw_send: To DATATAKING: set dec 6.0480710584 2011-Feb-03 01:05:41 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Feb-03 01:05:41 LOG3 vw_send: To DATATAKING: pnt tr 242.56 6.0480710584 -CF 2011-Feb-03 01:05:41 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 01:05:41 STOP finish_task: Finishing task 'sending tracking commands' 2011-Feb-03 01:05:41 LOG5 finish_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2011-Feb-03 01:05:41 INFO2 finish_task: DONE finished sending: tracking commands 2011-Feb-03 01:05:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 01:05:41 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Feb-03 01:05:41 LOG5 end_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2011-Feb-03 01:05:41 LOG1 fixed_driftmap: Parameters: HA = -00:23:00.1 Start = 09:30:39.6 LST = 09:30:47.4 diff = -7.8 secs 2011-Feb-03 01:05:41 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2011-Feb-03 01:05:41 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Feb-03 01:05:41 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Feb-03 01:05:41 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Feb-03 01:05:41 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Feb-03 01:05:41 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Feb-03 01:05:41 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2011-Feb-03 01:05:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Feb-03 01:05:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Feb-03 01:05:41 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Feb-03 01:05:41 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Feb-03 01:05:41 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Feb-03 01:05:41 LOG3 take_mock_data: PSET configuration: object=AGES3193_p2_112 2011-Feb-03 01:05:41 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Feb-03 01:05:41 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Feb-03 01:05:41 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Feb-03 01:05:41 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Feb-03 01:05:41 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Feb-03 01:05:41 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Feb-03 01:05:41 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Feb-03 01:05:41 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Feb-03 01:05:41 LOG3 take_mock_data: PSET configuration: patternid=103400043 2011-Feb-03 01:05:41 LOG3 take_mock_data: PSET configuration: scanid=103400043 2011-Feb-03 01:05:41 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Feb-03 01:05:41 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Feb-03 01:05:41 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Feb-03 01:05:41 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456267174.0 2011-Feb-03 01:05:41 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306267174.0 2011-Feb-03 01:05:41 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Feb-03 01:05:41 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Feb-03 01:05:41 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGES3193_p2_112:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=103400043:scanid=103400043:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456267174.0:topobfreqhz=1306267174.0:filetype=1 2011-Feb-03 01:05:41 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Feb-03 01:05:41 LOG5 begin_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2011-Feb-03 01:05:41 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_112" 2011-Feb-03 01:05:41 LOG4 from_mock: From MOCK: psetok 2011-Feb-03 01:05:41 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Feb-03 01:05:41 LOG5 end_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2011-Feb-03 01:05:41 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Feb-03 01:05:41 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Feb-03 01:05:41 LOG3 socket_wait: To MOCK: STAR1200 2011-Feb-03 01:05:41 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Feb-03 01:05:41 LOG5 begin_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2011-Feb-03 01:05:41 LOG4 got_cormsg: From DATATAKING: set ra 242.56 2011-Feb-03 01:05:41 LOG4 from_mock: From MOCK: starok 2011-Feb-03 01:05:41 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Feb-03 01:05:41 LOG5 end_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2011-Feb-03 01:05:41 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Feb-03 01:05:41 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 103400043 2011-Feb-03 01:05:42 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Feb-03 01:05:42 LOG5 begin_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2011-Feb-03 01:05:42 LOG4 got_cormsg: From DATATAKING: set dec 6.0480710584 2011-Feb-03 01:05:42 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Feb-03 01:05:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 01:05:42 LOG4 got_cormsg: From DATATAKING: vw% 242.56 2011-Feb-03 01:05:42 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Feb-03 01:05:42 LOG4 got_cormsg: From DATATAKING: vw% 6.0480710584 2011-Feb-03 01:05:42 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 01:05:42 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Feb-03 01:05:42 LOG4 got_cormsg: From DATATAKING: pnt tr 242.56 6.0480710584 -CF 2011-Feb-03 01:05:42 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 01:05:42 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Feb-03 01:05:42 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 01:05:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Feb-03 01:05:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18343.00 2011-Feb-03 01:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:05:44 INFO2 got_mock_message: Mock spectrometer start file number is 00500 2011-Feb-03 01:05:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.267174 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 01:05:44 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Feb-03 01:05:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.267174 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:05:44 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2011-Feb-03 01:05:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.267174 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:05:44 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Feb-03 01:05:44 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Feb-03 01:05:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Feb-03 01:05:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2011-Feb-03 01:05:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Feb-03 01:05:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Feb-03 01:05:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Feb-03 01:05:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.267174 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:05:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Feb-03 01:05:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.267174 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:05:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Feb-03 01:05:44 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Feb-03 01:05:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.16 GB 2011-Feb-03 01:05:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.16 GB 2011-Feb-03 01:05:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.16 GB 2011-Feb-03 01:05:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.16 GB 2011-Feb-03 01:05:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.16 GB 2011-Feb-03 01:05:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.16 GB 2011-Feb-03 01:05:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.16 GB 2011-Feb-03 01:05:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.267174 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:05:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.267174 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:05:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.267174 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:05:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.267174 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:05:45 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2011-Feb-03 01:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.115 (still bad) 2011-Feb-03 01:05:47 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 01:05:47.01 2011-Feb-03 01:05:47 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1296709547.01 Thu Feb 3 01:05:47 2011 2011-Feb-03 01:05:47 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Feb-03 01:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:05:54 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2011-Feb-03 01:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.121 (still bad) 2011-Feb-03 01:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 01:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 01:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.118 (still bad) 2011-Feb-03 01:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:06:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:06:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 1.043 1.053 0.908 2011-Feb-03 01:06:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.964 1.117 0.928 1.072 2011-Feb-03 01:06:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.931 0.864 0.913 1.042 2011-Feb-03 01:06:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.036 0.920 0.043 2011-Feb-03 01:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.118 (still bad) 2011-Feb-03 01:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.124 (still bad) 2011-Feb-03 01:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.123 (still bad) 2011-Feb-03 01:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.127 (still bad) 2011-Feb-03 01:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 01:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.122 (still bad) 2011-Feb-03 01:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 01:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:07:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:07:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 1.043 1.042 0.898 2011-Feb-03 01:07:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.966 1.119 0.927 1.071 2011-Feb-03 01:07:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.932 0.865 0.916 1.044 2011-Feb-03 01:07:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.085 0.036 0.925 0.043 2011-Feb-03 01:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.121 (still bad) 2011-Feb-03 01:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.124 (still bad) 2011-Feb-03 01:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.123 (still bad) 2011-Feb-03 01:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.126 (still bad) 2011-Feb-03 01:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.123 (still bad) 2011-Feb-03 01:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:08:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:08:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.037 1.041 0.896 2011-Feb-03 01:08:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.962 1.118 0.926 1.070 2011-Feb-03 01:08:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.932 0.863 0.915 1.042 2011-Feb-03 01:08:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 0.036 0.922 0.043 2011-Feb-03 01:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.124 (still bad) 2011-Feb-03 01:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.123 (still bad) 2011-Feb-03 01:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 01:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 01:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:09:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:09:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.036 1.037 0.891 2011-Feb-03 01:09:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.961 1.116 0.925 1.070 2011-Feb-03 01:09:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.930 0.861 0.914 1.041 2011-Feb-03 01:09:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 0.036 0.921 0.043 2011-Feb-03 01:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.118 (still bad) 2011-Feb-03 01:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:10:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:10:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.036 1.037 0.893 2011-Feb-03 01:10:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.964 1.116 0.925 1.067 2011-Feb-03 01:10:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.928 0.860 0.911 1.041 2011-Feb-03 01:10:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.036 0.921 0.043 2011-Feb-03 01:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.115 (still bad) 2011-Feb-03 01:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.114 (still bad) 2011-Feb-03 01:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 01:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.123 (still bad) 2011-Feb-03 01:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.123 (still bad) 2011-Feb-03 01:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.122 (still bad) 2011-Feb-03 01:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:11:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:11:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.037 1.036 0.894 2011-Feb-03 01:11:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.963 1.116 0.926 1.069 2011-Feb-03 01:11:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.929 0.860 0.913 1.041 2011-Feb-03 01:11:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.036 0.921 0.043 2011-Feb-03 01:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.126 (still bad) 2011-Feb-03 01:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.122 (still bad) 2011-Feb-03 01:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.125 (still bad) 2011-Feb-03 01:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 01:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 01:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:12:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:12:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 1.039 1.040 0.895 2011-Feb-03 01:12:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.972 1.124 0.935 1.079 2011-Feb-03 01:12:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.931 0.862 0.915 1.043 2011-Feb-03 01:12:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 0.036 0.924 0.043 2011-Feb-03 01:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:13:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:13:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.035 1.041 0.896 2011-Feb-03 01:13:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.966 1.120 0.930 1.073 2011-Feb-03 01:13:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.932 0.862 0.915 1.042 2011-Feb-03 01:13:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 0.036 0.924 0.043 2011-Feb-03 01:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.123 (still bad) 2011-Feb-03 01:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.120 (still bad) 2011-Feb-03 01:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.119 (still bad) 2011-Feb-03 01:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.123 (still bad) 2011-Feb-03 01:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.126 (still bad) 2011-Feb-03 01:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.124 (still bad) 2011-Feb-03 01:14:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:14:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.032 1.039 0.895 2011-Feb-03 01:14:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.965 1.116 0.927 1.070 2011-Feb-03 01:14:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.933 0.862 0.917 1.044 2011-Feb-03 01:14:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 0.036 0.924 0.043 2011-Feb-03 01:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.123 (still bad) 2011-Feb-03 01:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.120 (still bad) 2011-Feb-03 01:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.119 (still bad) 2011-Feb-03 01:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.122 (still bad) 2011-Feb-03 01:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.124 (still bad) 2011-Feb-03 01:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:15:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:15:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.033 1.041 0.896 2011-Feb-03 01:15:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.965 1.118 0.926 1.071 2011-Feb-03 01:15:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.931 0.861 0.914 1.042 2011-Feb-03 01:15:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.036 0.920 0.043 2011-Feb-03 01:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.123 (still bad) 2011-Feb-03 01:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.119 (still bad) 2011-Feb-03 01:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.116 (still bad) 2011-Feb-03 01:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 01:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.119 (still bad) 2011-Feb-03 01:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.121 (still bad) 2011-Feb-03 01:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:16:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:16:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.929 1.038 1.040 0.896 2011-Feb-03 01:16:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.968 1.120 0.926 1.070 2011-Feb-03 01:16:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.931 0.864 0.914 1.043 2011-Feb-03 01:16:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.036 0.921 0.043 2011-Feb-03 01:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.123 (still bad) 2011-Feb-03 01:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 01:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.127 (still bad) 2011-Feb-03 01:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 01:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 01:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 01:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.121 (still bad) 2011-Feb-03 01:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 01:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:17:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:17:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.933 1.040 1.039 0.896 2011-Feb-03 01:17:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.965 1.117 0.929 1.072 2011-Feb-03 01:17:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.927 0.864 0.918 1.045 2011-Feb-03 01:17:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 0.036 0.923 0.043 2011-Feb-03 01:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 01:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 01:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 01:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 01:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 01:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 01:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 01:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 01:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:18:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:18:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.934 1.041 1.039 0.897 2011-Feb-03 01:18:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.967 1.119 0.926 1.071 2011-Feb-03 01:18:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.934 0.865 0.915 1.044 2011-Feb-03 01:18:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.086 0.036 0.926 0.043 2011-Feb-03 01:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.125 (still bad) 2011-Feb-03 01:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.128 (still bad) 2011-Feb-03 01:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 01:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 01:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.123 (still bad) 2011-Feb-03 01:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 01:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 01:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 01:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.123 (still bad) 2011-Feb-03 01:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 01:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 01:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.123 (still bad) 2011-Feb-03 01:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:19:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:19:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.938 1.044 1.050 0.905 2011-Feb-03 01:19:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.963 1.118 0.926 1.072 2011-Feb-03 01:19:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.930 0.862 0.914 1.042 2011-Feb-03 01:19:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.084 0.036 0.924 0.043 2011-Feb-03 01:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.123 (still bad) 2011-Feb-03 01:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.122 (still bad) 2011-Feb-03 01:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:20:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:20:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.932 1.038 1.040 0.894 2011-Feb-03 01:20:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.967 1.121 0.928 1.072 2011-Feb-03 01:20:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.930 0.864 0.916 1.041 2011-Feb-03 01:20:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.086 0.036 0.925 0.043 2011-Feb-03 01:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.119 (still bad) 2011-Feb-03 01:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 01:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 01:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.128 (still bad) 2011-Feb-03 01:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 01:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.123 (still bad) 2011-Feb-03 01:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.133 (still bad) 2011-Feb-03 01:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 01:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 01:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 01:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 01:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 01:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.131 (still bad) 2011-Feb-03 01:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 01:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.123 (still bad) 2011-Feb-03 01:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.124 (still bad) 2011-Feb-03 01:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:21:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:21:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 1.056 1.040 0.894 2011-Feb-03 01:21:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.965 1.116 0.928 1.070 2011-Feb-03 01:21:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.931 0.864 0.916 1.043 2011-Feb-03 01:21:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 0.036 0.922 0.043 2011-Feb-03 01:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.124 (still bad) 2011-Feb-03 01:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.120 (still bad) 2011-Feb-03 01:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.120 (still bad) 2011-Feb-03 01:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.121 (still bad) 2011-Feb-03 01:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 01:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 01:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 01:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 01:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.129 (still bad) 2011-Feb-03 01:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 01:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:22:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.037 < 0.75)! 2011-Feb-03 01:22:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 1.041 1.050 0.902 2011-Feb-03 01:22:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.976 1.126 0.937 1.080 2011-Feb-03 01:22:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.932 0.863 0.916 1.043 2011-Feb-03 01:22:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.089 0.037 0.928 0.043 2011-Feb-03 01:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 01:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 01:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 01:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 01:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 01:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.131 (still bad) 2011-Feb-03 01:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.122 (still bad) 2011-Feb-03 01:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.124 (still bad) 2011-Feb-03 01:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.123 (still bad) 2011-Feb-03 01:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.133 (still bad) 2011-Feb-03 01:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.146 (still bad) 2011-Feb-03 01:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.139 (still bad) 2011-Feb-03 01:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.135 (still bad) 2011-Feb-03 01:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 01:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:23:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:23:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.942 1.049 1.047 0.900 2011-Feb-03 01:23:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.970 1.125 0.934 1.080 2011-Feb-03 01:23:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.046 0.971 0.923 1.050 2011-Feb-03 01:23:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.092 0.036 0.930 0.043 2011-Feb-03 01:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 01:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 01:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.123 (still bad) 2011-Feb-03 01:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:24:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:24:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.936 1.041 1.044 0.898 2011-Feb-03 01:24:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.964 1.119 0.928 1.072 2011-Feb-03 01:24:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.933 0.866 0.918 1.044 2011-Feb-03 01:24:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.084 0.036 0.923 0.043 2011-Feb-03 01:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 01:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.118 (still bad) 2011-Feb-03 01:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 01:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.120 (still bad) 2011-Feb-03 01:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.121 (still bad) 2011-Feb-03 01:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:25:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:25:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.937 1.044 1.040 0.896 2011-Feb-03 01:25:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.964 1.120 0.927 1.071 2011-Feb-03 01:25:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.930 0.863 0.914 1.045 2011-Feb-03 01:25:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.084 0.036 0.923 0.043 2011-Feb-03 01:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 01:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:25:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 01:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:25:48 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Feb-03 01:25:48 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Feb-03 01:25:48 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Feb-03 01:25:48 LOG5 end_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2011-Feb-03 01:25:48 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Feb-03 01:25:48 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2011-Feb-03 01:25:48 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Feb-03 01:25:48 LOG5 finish_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2011-Feb-03 01:25:48 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Feb-03 01:25:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Feb-03 01:25:48 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Feb-03 01:25:48 LOG5 end_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2011-Feb-03 01:25:48 COMMAND run_command_line: EXECUTING command 44: 'ENDIF' 2011-Feb-03 01:25:48 COMMAND run_command_line: EXECUTING command 47: 'IF LSTSLEW(AGES3193_p2_114) < 095338 THEN' 2011-Feb-03 01:25:48 LOG3 is_if_valid: Current source data: up 193.3 2.7 UP - - 85 2.0 2011-Feb-03 01:25:48 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p2_114) < 095338 2011-Feb-03 01:25:48 INFO5 is_if_valid: Condition parsed as: 9.8826903333333327 < 9.8938888888888883 2011-Feb-03 01:25:48 COMMAND run_command_line: EXECUTING command 48: 'FIXEDDRIFT az=180.02 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_114 ra=95300.00 dec=210330.00' 2011-Feb-03 01:25:48 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Feb-03 01:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:25:49 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Feb-03 01:25:49 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 180.02 19.1 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p2_114 95300.00 210330.00 J 8500.0 Heliocentric velocity(optical)' 2011-Feb-03 01:25:49 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Feb-03 01:25:49 LOG5 begin_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2011-Feb-03 01:25:49 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p2_112' 2011-Feb-03 01:25:49 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Feb-03 01:25:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_114} 2011-Feb-03 01:25:49 INFO3 fixed_driftmap: Sending telescope to Az = 180.02 and ZA = 2.65 2011-Feb-03 01:25:49 LOG3 track_source: Calling 'track_source AGES3193_p2_114 180.02 2.6481631503 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Feb-03 01:25:49 START begin_task: Starting task 'sending tracking commands' 2011-Feb-03 01:25:49 LOG5 begin_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2011-Feb-03 01:25:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_114} INFO {Slewing to source 'AGES3193_p2_114' ...} 2011-Feb-03 01:25:49 INFO1 track_source: Starting to track AGES3193_p2_114 2011-Feb-03 01:25:49 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_114" 2011-Feb-03 01:25:49 LOG3 vw_send: To DATATAKING: set ra 180.02 2011-Feb-03 01:25:49 LOG3 vw_send: To DATATAKING: set dec 2.6481631503 2011-Feb-03 01:25:49 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Feb-03 01:25:49 LOG3 vw_send: To DATATAKING: pnt tr 180.02 2.6481631503 -CF 2011-Feb-03 01:25:49 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 01:25:49 STOP finish_task: Finishing task 'sending tracking commands' 2011-Feb-03 01:25:49 LOG5 finish_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2011-Feb-03 01:25:49 INFO2 finish_task: DONE finished sending: tracking commands 2011-Feb-03 01:25:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 01:25:49 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Feb-03 01:25:49 LOG5 end_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2011-Feb-03 01:25:49 START begin_task: Starting task 'rotate ALFA to +19.1 degrees' 2011-Feb-03 01:25:49 LOG5 begin_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2011-Feb-03 01:25:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19.1 degrees ...} 2011-Feb-03 01:25:49 INFO2 rotate_alfa: ALFA commanded to +19.1 degrees 2011-Feb-03 01:25:49 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.1 REPLY 2011-Feb-03 01:25:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Feb-03 01:25:49 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Feb-03 01:25:49 LOG5 begin_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2011-Feb-03 01:25:49 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_114" 2011-Feb-03 01:25:49 LOG4 got_cormsg: From DATATAKING: set ra 180.02 2011-Feb-03 01:25:49 LOG4 got_cormsg: From DATATAKING: set dec 2.6481631503 2011-Feb-03 01:25:49 LOG4 got_cormsg: From DATATAKING: vw% 180.02 2011-Feb-03 01:25:49 LOG4 got_cormsg: From DATATAKING: vw% 2.6481631503 2011-Feb-03 01:25:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 01:25:49 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Feb-03 01:25:49 LOG4 got_cormsg: From DATATAKING: pnt tr 180.02 2.6481631503 -CF 2011-Feb-03 01:25:49 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 01:25:49 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Feb-03 01:25:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 01:26:24 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Feb-03 01:26:24 INFO3 alfa_motor: ALFA rotator in-position +19.10 degrees 2011-Feb-03 01:26:24 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Feb-03 01:26:24 LOG5 end_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2011-Feb-03 01:26:24 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Feb-03 01:26:24 STOP finish_task: Finishing task 'rotate ALFA to +19.1 degrees' 2011-Feb-03 01:26:24 LOG5 finish_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2011-Feb-03 01:26:24 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19.1 degrees 2011-Feb-03 01:26:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 01:26:24 STOP end_task: Finishing task 'rotate ALFA to +19.1 degrees' with status 'OK' 2011-Feb-03 01:26:24 LOG5 end_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2011-Feb-03 01:26:24 START begin_task: Starting task 'waiting on telescope' 2011-Feb-03 01:26:24 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2011-Feb-03 01:26:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Feb-03 01:26:24 LOG3 waittrk: Start waittrk 5 2011-Feb-03 01:26:24 START begin_task: Starting task 'waiting on telescope movement' 2011-Feb-03 01:26:24 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2011-Feb-03 01:26:29 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Feb-03 01:26:29 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2011-Feb-03 01:26:29 START begin_task: Starting task 'waiting on telescope on source' 2011-Feb-03 01:26:29 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2011-Feb-03 01:28:30 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Feb-03 01:28:30 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2011-Feb-03 01:28:30 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Feb-03 01:28:30 INFO2 waittrk: Now tracking AGES3193_p2_114 2011-Feb-03 01:28:30 LOG4 waittrk: Current telescope position: Az = 179.79 ZA = 2.66 2011-Feb-03 01:28:30 STOP finish_task: Finishing task 'waiting on telescope' 2011-Feb-03 01:28:30 LOG5 finish_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2011-Feb-03 01:28:30 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Feb-03 01:28:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 01:28:30 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Feb-03 01:28:30 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2011-Feb-03 01:28:30 START begin_task: Starting task 'selecting calibration type' 2011-Feb-03 01:28:30 LOG5 begin_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2011-Feb-03 01:28:30 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Feb-03 01:28:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Feb-03 01:28:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 01:28:30 START begin_task: Starting task 'waiting on setcal' 2011-Feb-03 01:28:30 LOG5 begin_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2011-Feb-03 01:28:30 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Feb-03 01:28:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 01:28:31 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 01:28:31 LOG4 got_cormsg: From DATATAKING: DONE 2011-Feb-03 01:28:31 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Feb-03 01:28:31 LOG5 end_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2011-Feb-03 01:28:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Feb-03 01:28:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Feb-03 01:28:31 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Feb-03 01:28:31 START begin_task: Starting task 'waiting on command to ALFA' 2011-Feb-03 01:28:31 LOG5 begin_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2011-Feb-03 01:28:31 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 01:28:31 LOG4 got_alfamon: From ALFAMON: ACK 2011-Feb-03 01:28:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Feb-03 01:28:31 LOG5 end_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2011-Feb-03 01:28:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Feb-03 01:28:31 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Feb-03 01:28:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Feb-03 01:28:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Feb-03 01:28:32 START begin_task: Starting task 'waiting on command to ALFA' 2011-Feb-03 01:28:32 LOG5 begin_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2011-Feb-03 01:28:32 LOG4 got_alfamon: From ALFAMON: ACK 2011-Feb-03 01:28:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Feb-03 01:28:32 LOG5 end_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2011-Feb-03 01:28:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Feb-03 01:28:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Feb-03 01:28:32 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Feb-03 01:28:32 LOG5 end_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2011-Feb-03 01:28:32 LOG5 dopset_later: Calling 'dopset_later 0' 2011-Feb-03 01:28:32 INFO3 dopset_later: Setting Doppler correction now 2011-Feb-03 01:28:32 LOG5 antvel: Calling 'antvel 180.020000 2.648163 F Heliocentric 0' 2011-Feb-03 01:28:32 LOG2 antvel: Transforming current Az = 180.02 ZA = 2.65 to apparent RA = 09:53:42.4 Dec = +21:00:07.1 2011-Feb-03 01:28:32 LOG2 antvel: Parameters to Doppler: Heliocentric 19711 2011 34 0.0 2011-Feb-03 01:28:32 INFO5 antvel: Computed antenna velocity: -5.11877 km/s 2011-Feb-03 01:28:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-5.1187677552000004 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Feb-03 01:28:32 INFO4 dopset_gen: New sky frequencies: 1381.267013 1381.267013 1381.267013 1381.267013 1381.267013 1381.267013 1381.267013 1381.267013 1381.267013 2011-Feb-03 01:28:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.267013 sky0=1381.267013 sky1=1381.267013 sky2=1381.267013 sky3=1381.267013 sky4=1381.267013 sky5=1381.267013 sky6=1381.267013 sky7=1381.267013 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 01:28:32 LOG2 dopset_gen: Result from 'sky2syn': 1631.267013 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 01:28:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631267013.0} 2011-Feb-03 01:28:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 01:28:32 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Feb-03 01:28:32 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Feb-03 01:28:32 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:53:08.3 Dec = +21:03:16.4 2011-Feb-03 01:28:32 LOG3 track_source: Calling 'track_source AGES3193_p2_114 095308.3 210316.4 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Feb-03 01:28:32 START begin_task: Starting task 'sending tracking commands' 2011-Feb-03 01:28:32 LOG5 begin_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2011-Feb-03 01:28:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_114} INFO {Slewing to source 'AGES3193_p2_114' ...} 2011-Feb-03 01:28:32 INFO1 track_source: Starting to track AGES3193_p2_114 2011-Feb-03 01:28:32 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_114" 2011-Feb-03 01:28:32 LOG3 vw_send: To DATATAKING: set ra 095308.3 2011-Feb-03 01:28:32 LOG3 vw_send: To DATATAKING: set dec 210316.4 2011-Feb-03 01:28:32 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Feb-03 01:28:32 LOG3 vw_send: To DATATAKING: pnt tr 095308.3 210316.4 -CJ 2011-Feb-03 01:28:32 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 01:28:32 STOP finish_task: Finishing task 'sending tracking commands' 2011-Feb-03 01:28:32 LOG5 finish_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2011-Feb-03 01:28:32 INFO2 finish_task: DONE finished sending: tracking commands 2011-Feb-03 01:28:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 01:28:32 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Feb-03 01:28:32 LOG5 end_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2011-Feb-03 01:28:32 START begin_task: Starting task 'waiting on telescope' 2011-Feb-03 01:28:32 LOG5 begin_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2011-Feb-03 01:28:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Feb-03 01:28:32 LOG3 waittrk: Start waittrk 5 2011-Feb-03 01:28:32 START begin_task: Starting task 'waiting on telescope movement' 2011-Feb-03 01:28:32 LOG5 begin_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2011-Feb-03 01:28:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631267013.0} 2011-Feb-03 01:28:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 01:28:32 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_114" 2011-Feb-03 01:28:32 LOG4 got_cormsg: From DATATAKING: set ra 095308.3 2011-Feb-03 01:28:32 LOG4 got_cormsg: From DATATAKING: set dec 210316.4 2011-Feb-03 01:28:32 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Feb-03 01:28:32 LOG4 got_cormsg: From DATATAKING: vw% 095308.3 2011-Feb-03 01:28:32 LOG4 got_cormsg: From DATATAKING: vw% 210316.4 2011-Feb-03 01:28:32 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 01:28:32 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Feb-03 01:28:32 LOG4 got_cormsg: From DATATAKING: pnt tr 095308.3 210316.4 -CJ 2011-Feb-03 01:28:32 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 01:28:32 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Feb-03 01:28:32 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 01:28:37 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Feb-03 01:28:37 LOG5 end_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2011-Feb-03 01:28:37 START begin_task: Starting task 'waiting on telescope on source' 2011-Feb-03 01:28:37 LOG5 begin_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2011-Feb-03 01:28:46 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Feb-03 01:28:46 LOG5 end_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2011-Feb-03 01:28:46 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Feb-03 01:28:46 INFO2 waittrk: Now tracking AGES3193_p2_114 2011-Feb-03 01:28:46 LOG4 waittrk: Current telescope position: Az = 178.91 ZA = 2.65 2011-Feb-03 01:28:46 STOP finish_task: Finishing task 'waiting on telescope' 2011-Feb-03 01:28:46 LOG5 finish_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2011-Feb-03 01:28:46 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Feb-03 01:28:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 01:28:46 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Feb-03 01:28:46 LOG5 end_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2011-Feb-03 01:28:46 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Feb-03 01:28:46 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2011-Feb-03 01:28:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Feb-03 01:28:46 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Feb-03 01:28:46 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Feb-03 01:28:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Feb-03 01:28:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 01:28:47 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Feb-03 01:28:47 LOG5 begin_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2011-Feb-03 01:28:47 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Feb-03 01:28:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 01:28:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 01:28:49 LOG4 got_cormsg: From DATATAKING: DONE 2011-Feb-03 01:28:49 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Feb-03 01:28:49 LOG5 end_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2011-Feb-03 01:28:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Feb-03 01:28:49 START begin_task: Starting task 'adjusting WAPP power' 2011-Feb-03 01:28:49 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2011-Feb-03 01:28:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Feb-03 01:28:49 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Feb-03 01:28:49 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Feb-03 01:28:49 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Feb-03 01:28:49 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Feb-03 01:28:49 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Feb-03 01:28:49 LOG5 begin_task: Level: (5) ID = <10208> Status = 0 0 0 0 ok 2011-Feb-03 01:28:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Feb-03 01:28:50 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 01:28:50 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 7 dB 2011-Feb-03 01:28:50 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 3 3 dB 2011-Feb-03 01:28:50 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2011-Feb-03 01:28:50 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2011-Feb-03 01:28:50 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Feb-03 01:28:50 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Feb-03 01:28:50 LOG5 end_task: Level: (5) ID = <10208> Status = 0 0 0 0 ok 2011-Feb-03 01:28:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.909 1.043 ALFA beam 1: 1.009 0.905 2011-Feb-03 01:28:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.941 1.110 ALFA beam 3: 0.911 1.077 2011-Feb-03 01:28:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.931 0.866 ALFA beam 5: 0.892 1.035 2011-Feb-03 01:28:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.029 0.036 ALFA beam 7: 1.101 0.043 2011-Feb-03 01:28:50 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Feb-03 01:28:50 LOG5 finish_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2011-Feb-03 01:28:50 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Feb-03 01:28:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 01:28:50 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Feb-03 01:28:50 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2011-Feb-03 01:28:50 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Feb-03 01:28:50 LOG5 begin_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2011-Feb-03 01:28:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Feb-03 01:28:50 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Feb-03 01:28:50 LOG3 socket_wait: To MOCK: ADJP30 2011-Feb-03 01:28:50 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Feb-03 01:28:50 LOG5 begin_task: Level: (5) ID = <10210> Status = 0 0 0 0 ok 2011-Feb-03 01:28:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:28:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.909 1.043 1.009 0.905 2011-Feb-03 01:28:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.941 1.110 0.911 1.077 2011-Feb-03 01:28:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.931 0.866 0.892 1.035 2011-Feb-03 01:28:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.029 0.036 1.101 0.043 2011-Feb-03 01:28:57 INFO3 from_mock: From MOCK: b0s0g0 rms:A 32.1 28.2 B 29.9 29.9 mn:A 0.0 0.0 B 0.6 0.6 gn: 10 10 2011-Feb-03 01:28:57 INFO3 from_mock: From MOCK: b0s1g0 rms:A 42.6 40.8 B 35.1 37.2 mn:A 0.3 -0.2 B 0.3 0.2 gn: 11 10 2011-Feb-03 01:28:57 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.9 29.0 B 30.2 27.1 mn:A -0.4 -0.3 B 0.1 -0.1 gn: 9 9 2011-Feb-03 01:28:57 INFO3 from_mock: From MOCK: b1s1g0 rms:A 47.6 44.0 B 49.8 49.8 mn:A -0.1 -0.3 B 0.4 -0.0 gn: 10 8 2011-Feb-03 01:28:57 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.2 28.3 B 30.0 31.3 mn:A -0.2 -0.4 B 0.2 -0.2 gn: 10 11 2011-Feb-03 01:28:57 INFO3 from_mock: From MOCK: b2s1g0 rms:A 33.5 33.8 B 43.6 40.5 mn:A 0.1 -0.2 B -0.2 0.0 gn: 11 11 2011-Feb-03 01:28:57 INFO3 from_mock: From MOCK: b3s0g0 rms:A 30.3 30.1 B 30.3 27.0 mn:A 0.5 -0.0 B 0.2 -0.2 gn: 11 11 2011-Feb-03 01:28:57 INFO3 from_mock: From MOCK: b3s1g0 rms:A 37.1 36.2 B 41.5 43.1 mn:A 0.3 0.8 B 0.6 -0.3 gn: 10 11 2011-Feb-03 01:28:57 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.3 29.4 B 29.9 30.1 mn:A -0.2 -0.2 B 0.2 -0.4 gn: 10 14 2011-Feb-03 01:28:57 INFO3 from_mock: From MOCK: b4s1g0 rms:A 40.9 37.2 B 38.3 36.8 mn:A -0.0 -0.2 B -0.2 -0.7 gn: 12 17 2011-Feb-03 01:28:57 INFO3 from_mock: From MOCK: b5s0g0 rms:A 28.7 28.2 B 30.5 30.4 mn:A 0.2 0.0 B 0.4 0.4 gn: 12 12 2011-Feb-03 01:28:57 INFO3 from_mock: From MOCK: b5s1g0 rms:A 37.8 36.9 B 42.6 42.7 mn:A -0.0 -0.1 B -0.1 0.0 gn: 12 10 2011-Feb-03 01:28:57 INFO3 from_mock: From MOCK: b6s0g0 rms:A 31.3 28.8 B 29.1 30.0 mn:A 0.0 -0.8 B 0.3 -0.5 gn: 12 29 2011-Feb-03 01:28:57 INFO3 from_mock: From MOCK: b6s1g0 rms:A 41.8 38.1 B 29.6 28.7 mn:A -0.5 0.6 B -0.2 -0.1 gn: 13 31 2011-Feb-03 01:28:57 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Feb-03 01:28:57 LOG5 end_task: Level: (5) ID = <10210> Status = 0 0 0 0 ok 2011-Feb-03 01:28:57 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Feb-03 01:28:57 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Feb-03 01:28:57 LOG5 finish_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2011-Feb-03 01:28:57 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Feb-03 01:28:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 01:28:57 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Feb-03 01:28:57 LOG5 end_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2011-Feb-03 01:28:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Feb-03 01:28:57 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Feb-03 01:28:57 LOG5 finish_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2011-Feb-03 01:28:57 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Feb-03 01:28:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 01:28:57 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Feb-03 01:28:57 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2011-Feb-03 01:28:57 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel Cabrera 2011-Feb-03 01:28:57 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel Cabrera 2011-Feb-03 01:28:57 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel Cabrera 2011-Feb-03 01:28:57 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel Cabrera 2011-Feb-03 01:28:57 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Feb-03 01:28:57 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Feb-03 01:28:57 LOG5 begin_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2011-Feb-03 01:28:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Feb-03 01:28:57 START begin_task: Starting task 'selecting calibration type' 2011-Feb-03 01:28:57 LOG5 begin_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2011-Feb-03 01:28:57 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Feb-03 01:28:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Feb-03 01:28:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 01:28:57 START begin_task: Starting task 'waiting on setcal' 2011-Feb-03 01:28:57 LOG5 begin_task: Level: (5) ID = <10213> Status = 0 0 0 0 ok 2011-Feb-03 01:28:57 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2011-Feb-03 01:28:57 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Feb-03 01:28:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 01:28:57 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 01:28:57 LOG4 got_cormsg: From DATATAKING: DONE 2011-Feb-03 01:28:57 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Feb-03 01:28:57 LOG5 end_task: Level: (5) ID = <10213> Status = 0 0 0 0 ok 2011-Feb-03 01:28:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Feb-03 01:28:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Feb-03 01:28:58 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Feb-03 01:28:58 START begin_task: Starting task 'waiting on command to ALFA' 2011-Feb-03 01:28:58 LOG5 begin_task: Level: (5) ID = <10214> Status = 0 0 0 0 ok 2011-Feb-03 01:28:58 LOG4 got_alfamon: From ALFAMON: ACK 2011-Feb-03 01:28:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Feb-03 01:28:58 LOG5 end_task: Level: (5) ID = <10214> Status = 0 0 0 0 ok 2011-Feb-03 01:28:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Feb-03 01:28:58 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Feb-03 01:28:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Feb-03 01:28:58 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Feb-03 01:28:58 START begin_task: Starting task 'waiting on command to ALFA' 2011-Feb-03 01:28:58 LOG5 begin_task: Level: (5) ID = <10215> Status = 0 0 0 0 ok 2011-Feb-03 01:28:58 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 01:28:58 LOG4 got_alfamon: From ALFAMON: ACK 2011-Feb-03 01:28:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Feb-03 01:28:58 LOG5 end_task: Level: (5) ID = <10215> Status = 0 0 0 0 ok 2011-Feb-03 01:28:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Feb-03 01:28:58 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Feb-03 01:28:58 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Feb-03 01:28:58 LOG5 end_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2011-Feb-03 01:28:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Feb-03 01:28:58 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Feb-03 01:28:58 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Feb-03 01:28:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Feb-03 01:28:58 LOG5 begin_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2011-Feb-03 01:28:58 LOG3 CALCONTROL-caltrig: Software trigger 2011-Feb-03 01:28:58 NOTE WAPPDATA-new_file: New FITS file: wapp.20110203.a2048.0003.fits 2011-Feb-03 01:28:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Feb-03 01:28:58 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20110203.a2048.0003.fits} 2011-Feb-03 01:28:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Feb-03 01:28:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Feb-03 01:28:58 LOG5 end_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2011-Feb-03 01:28:58 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Feb-03 01:28:58 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Feb-03 01:28:58 LOG5 begin_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2011-Feb-03 01:28:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Feb-03 01:28:58 LOG5 log_alfabeam: Parameters: 9.8856388888888898 21.054555555555556 9.902279 2011.0932560460872 19.099895 2011-Feb-03 01:28:58 LOG4 log_alfabeam: ALFABEAM 0 9.885638888889499 21.054555555555574 2011-Feb-03 01:28:58 LOG4 log_alfabeam: ALFABEAM 1 9.887082529669312 20.950394689802639 2011-Feb-03 01:28:58 LOG4 log_alfabeam: ALFABEAM 2 9.891811558780621 21.021213652620258 2011-Feb-03 01:28:58 LOG4 log_alfabeam: ALFABEAM 3 9.890532457344962 21.125871560321524 2011-Feb-03 01:28:58 LOG4 log_alfabeam: ALFABEAM 4 9.884095947529012 21.158553560647672 2011-Feb-03 01:28:58 LOG4 log_alfabeam: ALFABEAM 5 9.879308193297833 21.084955568645306 2011-Feb-03 01:28:58 LOG4 log_alfabeam: ALFABEAM 6 9.881014194858523 20.981536809198644 2011-Feb-03 01:28:58 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Feb-03 01:28:58 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Feb-03 01:28:58 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Feb-03 01:28:58 LOG3 take_mock_data: PSET configuration: object=AGES3193_p2_114 2011-Feb-03 01:28:58 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Feb-03 01:28:58 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Feb-03 01:28:58 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Feb-03 01:28:58 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Feb-03 01:28:58 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Feb-03 01:28:58 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Feb-03 01:28:58 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Feb-03 01:28:58 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Feb-03 01:28:58 LOG3 take_mock_data: PSET configuration: patternid=103400043 2011-Feb-03 01:28:58 LOG3 take_mock_data: PSET configuration: scanid=103400044 2011-Feb-03 01:28:58 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Feb-03 01:28:58 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Feb-03 01:28:58 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Feb-03 01:28:58 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456267013.0 2011-Feb-03 01:28:58 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306267013.0 2011-Feb-03 01:28:58 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Feb-03 01:28:58 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Feb-03 01:28:58 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGES3193_p2_114:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=103400043:scanid=103400044:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456267013.0:topobfreqhz=1306267013.0:filetype=1 2011-Feb-03 01:28:58 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Feb-03 01:28:58 LOG5 begin_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2011-Feb-03 01:28:58 LOG4 from_mock: From MOCK: psetok 2011-Feb-03 01:28:58 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Feb-03 01:28:58 LOG5 end_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2011-Feb-03 01:28:58 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Feb-03 01:28:58 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Feb-03 01:28:58 LOG3 socket_wait: To MOCK: STAR5 2011-Feb-03 01:28:58 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Feb-03 01:28:58 LOG5 begin_task: Level: (5) ID = <10219> Status = 0 0 0 0 ok 2011-Feb-03 01:28:58 LOG4 from_mock: From MOCK: starok 2011-Feb-03 01:28:58 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Feb-03 01:28:58 LOG5 end_task: Level: (5) ID = <10219> Status = 0 0 0 0 ok 2011-Feb-03 01:28:58 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Feb-03 01:28:58 INFO2 take_data: Starting WAPP+Mock 5-second scan: 103400044 2011-Feb-03 01:28:59 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Feb-03 01:28:59 LOG5 begin_task: Level: (5) ID = <10220> Status = 0 0 0 0 ok 2011-Feb-03 01:28:59 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Feb-03 01:28:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 01:28:59 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Feb-03 01:28:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Feb-03 01:28:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19740.00 2011-Feb-03 01:29:01 INFO2 got_mock_message: Mock spectrometer start file number is 00600 2011-Feb-03 01:29:01 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Feb-03 01:29:01 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Feb-03 01:29:01 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Feb-03 01:29:01 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Feb-03 01:29:01 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Feb-03 01:29:01 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2011-Feb-03 01:29:01 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Feb-03 01:29:01 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Feb-03 01:29:01 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Feb-03 01:29:01 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Feb-03 01:29:01 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Feb-03 01:29:01 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Feb-03 01:29:01 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2011-Feb-03 01:29:01 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2011-Feb-03 01:29:01 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2011-Feb-03 01:29:01 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2011-Feb-03 01:29:01 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2011-Feb-03 01:29:01 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2011-Feb-03 01:29:01 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2011-Feb-03 01:29:04 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 01:29:04.01 2011-Feb-03 01:29:04 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1296710944.01 Thu Feb 3 01:29:04 2011 2011-Feb-03 01:29:04 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Feb-03 01:29:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.267013 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 01:29:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.267013 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:29:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.267013 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:29:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.267013 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:29:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.267013 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:29:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.267013 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:29:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.267013 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:29:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.267013 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:29:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.267013 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.556 (still bad) 2011-Feb-03 01:29:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 01:29:09 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Feb-03 01:29:10 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Feb-03 01:29:10 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Feb-03 01:29:10 LOG5 end_task: Level: (5) ID = <10220> Status = 0 0 0 0 ok 2011-Feb-03 01:29:10 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Feb-03 01:29:10 LOG5 end_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2011-Feb-03 01:29:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Feb-03 01:29:10 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Feb-03 01:29:10 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Feb-03 01:29:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Feb-03 01:29:10 LOG5 begin_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2011-Feb-03 01:29:10 LOG3 CALCONTROL-caltrig: Software trigger 2011-Feb-03 01:29:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Feb-03 01:29:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Feb-03 01:29:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Feb-03 01:29:10 LOG5 end_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2011-Feb-03 01:29:10 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Feb-03 01:29:10 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Feb-03 01:29:10 LOG5 begin_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2011-Feb-03 01:29:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Feb-03 01:29:10 LOG5 log_alfabeam: Parameters: 9.8856388888888898 21.054555555555556 9.905621 2011.0932564263442 19.099895 2011-Feb-03 01:29:10 LOG4 log_alfabeam: ALFABEAM 0 9.885638888889009 21.054555555555563 2011-Feb-03 01:29:10 LOG4 log_alfabeam: ALFABEAM 1 9.887215728844614 20.950774048299053 2011-Feb-03 01:29:10 LOG4 log_alfabeam: ALFABEAM 2 9.891853376756103 21.022770246188255 2011-Feb-03 01:29:10 LOG4 log_alfabeam: ALFABEAM 3 9.890440150762837 21.127089647664992 2011-Feb-03 01:29:10 LOG4 log_alfabeam: ALFABEAM 4 9.883962865037400 21.158149408296772 2011-Feb-03 01:29:10 LOG4 log_alfabeam: ALFABEAM 5 9.879270335790309 21.083361995974865 2011-Feb-03 01:29:10 LOG4 log_alfabeam: ALFABEAM 6 9.881108384186719 20.980387732472384 2011-Feb-03 01:29:10 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Feb-03 01:29:10 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Feb-03 01:29:10 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Feb-03 01:29:10 LOG3 take_mock_data: PSET configuration: object=AGES3193_p2_114 2011-Feb-03 01:29:10 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Feb-03 01:29:10 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Feb-03 01:29:10 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Feb-03 01:29:10 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Feb-03 01:29:10 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Feb-03 01:29:10 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Feb-03 01:29:10 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Feb-03 01:29:10 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Feb-03 01:29:10 LOG3 take_mock_data: PSET configuration: patternid=103400043 2011-Feb-03 01:29:10 LOG3 take_mock_data: PSET configuration: scanid=103400045 2011-Feb-03 01:29:10 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Feb-03 01:29:10 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Feb-03 01:29:10 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Feb-03 01:29:10 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456267013.0 2011-Feb-03 01:29:10 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306267013.0 2011-Feb-03 01:29:10 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Feb-03 01:29:10 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Feb-03 01:29:10 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGES3193_p2_114:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=103400043:scanid=103400045:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456267013.0:topobfreqhz=1306267013.0:filetype=1 2011-Feb-03 01:29:10 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Feb-03 01:29:10 LOG5 begin_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2011-Feb-03 01:29:10 LOG4 from_mock: From MOCK: psetok 2011-Feb-03 01:29:10 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Feb-03 01:29:10 LOG5 end_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2011-Feb-03 01:29:10 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Feb-03 01:29:10 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Feb-03 01:29:10 LOG3 socket_wait: To MOCK: STAR5 2011-Feb-03 01:29:10 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Feb-03 01:29:10 LOG5 begin_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2011-Feb-03 01:29:10 LOG4 from_mock: From MOCK: starok 2011-Feb-03 01:29:10 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Feb-03 01:29:10 LOG5 end_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2011-Feb-03 01:29:10 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Feb-03 01:29:10 INFO2 take_data: Starting WAPP+Mock 5-second scan: 103400045 2011-Feb-03 01:29:10 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Feb-03 01:29:10 LOG5 begin_task: Level: (5) ID = <10225> Status = 0 0 0 0 ok 2011-Feb-03 01:29:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 01:29:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Feb-03 01:29:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19751.00 2011-Feb-03 01:29:11 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Feb-03 01:29:11 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Feb-03 01:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.556 (still bad) 2011-Feb-03 01:29:13 INFO2 got_mock_message: Mock spectrometer start file number is 00700 2011-Feb-03 01:29:13 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Feb-03 01:29:13 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Feb-03 01:29:13 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Feb-03 01:29:13 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Feb-03 01:29:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Feb-03 01:29:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2011-Feb-03 01:29:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Feb-03 01:29:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Feb-03 01:29:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Feb-03 01:29:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Feb-03 01:29:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Feb-03 01:29:13 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Feb-03 01:29:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2011-Feb-03 01:29:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2011-Feb-03 01:29:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2011-Feb-03 01:29:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2011-Feb-03 01:29:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2011-Feb-03 01:29:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2011-Feb-03 01:29:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2011-Feb-03 01:29:16 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 01:29:16.01 2011-Feb-03 01:29:16 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1296710956.01 Thu Feb 3 01:29:16 2011 2011-Feb-03 01:29:16 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Feb-03 01:29:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.267013 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 01:29:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.267013 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:29:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.267013 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:29:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.267013 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:29:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.267013 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:29:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.267013 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:29:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.267013 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:29:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.267013 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:29:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.267013 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:29:16 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Feb-03 01:29:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 01:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:29:21 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Feb-03 01:29:22 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Feb-03 01:29:22 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Feb-03 01:29:22 LOG5 end_task: Level: (5) ID = <10225> Status = 0 0 0 0 ok 2011-Feb-03 01:29:22 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Feb-03 01:29:22 LOG5 end_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2011-Feb-03 01:29:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Feb-03 01:29:22 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Feb-03 01:29:22 LOG5 finish_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2011-Feb-03 01:29:22 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Feb-03 01:29:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 01:29:22 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Feb-03 01:29:22 LOG5 end_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2011-Feb-03 01:29:22 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Feb-03 01:29:22 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 180.02 and ZA = 2.65 2011-Feb-03 01:29:22 LOG3 track_source: Calling 'track_source AGES3193_p2_114 180.02 2.6481631503 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Feb-03 01:29:22 START begin_task: Starting task 'sending tracking commands' 2011-Feb-03 01:29:22 LOG5 begin_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2011-Feb-03 01:29:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_114} INFO {Slewing to source 'AGES3193_p2_114' ...} 2011-Feb-03 01:29:22 INFO1 track_source: Starting to track AGES3193_p2_114 2011-Feb-03 01:29:22 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_114" 2011-Feb-03 01:29:22 LOG3 vw_send: To DATATAKING: set ra 180.02 2011-Feb-03 01:29:22 LOG3 vw_send: To DATATAKING: set dec 2.6481631503 2011-Feb-03 01:29:22 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Feb-03 01:29:22 LOG3 vw_send: To DATATAKING: pnt tr 180.02 2.6481631503 -CF 2011-Feb-03 01:29:22 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 01:29:22 STOP finish_task: Finishing task 'sending tracking commands' 2011-Feb-03 01:29:22 LOG5 finish_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2011-Feb-03 01:29:22 INFO2 finish_task: DONE finished sending: tracking commands 2011-Feb-03 01:29:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 01:29:22 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Feb-03 01:29:22 LOG5 end_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2011-Feb-03 01:29:22 LOG1 fixed_driftmap: Parameters: HA = -00:00:00.2 Start = 09:53:39.5 LST = 09:54:32.3 diff = -52.8 secs 2011-Feb-03 01:29:22 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2011-Feb-03 01:29:22 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Feb-03 01:29:22 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Feb-03 01:29:22 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Feb-03 01:29:22 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Feb-03 01:29:22 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Feb-03 01:29:22 LOG5 begin_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2011-Feb-03 01:29:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Feb-03 01:29:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Feb-03 01:29:22 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Feb-03 01:29:22 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Feb-03 01:29:22 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Feb-03 01:29:22 LOG3 take_mock_data: PSET configuration: object=AGES3193_p2_114 2011-Feb-03 01:29:22 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Feb-03 01:29:22 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Feb-03 01:29:22 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Feb-03 01:29:22 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Feb-03 01:29:22 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Feb-03 01:29:22 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Feb-03 01:29:22 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Feb-03 01:29:22 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Feb-03 01:29:22 LOG3 take_mock_data: PSET configuration: patternid=103400046 2011-Feb-03 01:29:22 LOG3 take_mock_data: PSET configuration: scanid=103400046 2011-Feb-03 01:29:22 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Feb-03 01:29:22 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Feb-03 01:29:22 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Feb-03 01:29:22 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456267013.0 2011-Feb-03 01:29:22 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306267013.0 2011-Feb-03 01:29:22 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Feb-03 01:29:22 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Feb-03 01:29:22 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGES3193_p2_114:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=103400046:scanid=103400046:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456267013.0:topobfreqhz=1306267013.0:filetype=1 2011-Feb-03 01:29:22 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Feb-03 01:29:22 LOG5 begin_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2011-Feb-03 01:29:22 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_114" 2011-Feb-03 01:29:22 LOG4 got_cormsg: From DATATAKING: set ra 180.02 2011-Feb-03 01:29:22 LOG4 from_mock: From MOCK: psetok 2011-Feb-03 01:29:22 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Feb-03 01:29:22 LOG5 end_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2011-Feb-03 01:29:22 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Feb-03 01:29:22 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Feb-03 01:29:22 LOG3 socket_wait: To MOCK: STAR1200 2011-Feb-03 01:29:22 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Feb-03 01:29:22 LOG5 begin_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2011-Feb-03 01:29:22 LOG4 got_cormsg: From DATATAKING: set dec 2.6481631503 2011-Feb-03 01:29:22 LOG4 got_cormsg: From DATATAKING: vw% 180.02 2011-Feb-03 01:29:22 LOG4 from_mock: From MOCK: starok 2011-Feb-03 01:29:22 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Feb-03 01:29:22 LOG5 end_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2011-Feb-03 01:29:22 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Feb-03 01:29:22 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 103400046 2011-Feb-03 01:29:23 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Feb-03 01:29:23 LOG5 begin_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2011-Feb-03 01:29:23 LOG4 got_cormsg: From DATATAKING: vw% 2.6481631503 2011-Feb-03 01:29:23 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Feb-03 01:29:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 01:29:23 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 01:29:23 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Feb-03 01:29:23 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Feb-03 01:29:23 LOG4 got_cormsg: From DATATAKING: pnt tr 180.02 2.6481631503 -CF 2011-Feb-03 01:29:23 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 01:29:23 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2011-Feb-03 01:29:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Feb-03 01:29:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19764.00 2011-Feb-03 01:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:29:25 INFO2 got_mock_message: Mock spectrometer start file number is 00800 2011-Feb-03 01:29:25 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Feb-03 01:29:25 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1199.9 s 2011-Feb-03 01:29:25 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Feb-03 01:29:25 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Feb-03 01:29:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Feb-03 01:29:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2011-Feb-03 01:29:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Feb-03 01:29:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Feb-03 01:29:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Feb-03 01:29:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Feb-03 01:29:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Feb-03 01:29:25 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Feb-03 01:29:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.16 GB 2011-Feb-03 01:29:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.16 GB 2011-Feb-03 01:29:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.16 GB 2011-Feb-03 01:29:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.16 GB 2011-Feb-03 01:29:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.16 GB 2011-Feb-03 01:29:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.16 GB 2011-Feb-03 01:29:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.16 GB 2011-Feb-03 01:29:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.267013 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 01:29:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.267013 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:29:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.267013 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:29:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.267013 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:29:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.267013 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:29:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.267013 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:29:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.267013 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:29:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.267013 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:29:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.267013 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 01:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:29:26 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2011-Feb-03 01:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:29:28 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 01:29:28.01 2011-Feb-03 01:29:28 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1296710968.01 Thu Feb 3 01:29:28 2011 2011-Feb-03 01:29:28 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Feb-03 01:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.146 (still bad) 2011-Feb-03 01:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.121 (still bad) 2011-Feb-03 01:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 01:29:43 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2011-Feb-03 01:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.121 (still bad) 2011-Feb-03 01:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:29:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:29:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.916 1.049 1.014 0.909 2011-Feb-03 01:29:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.943 1.111 0.918 1.081 2011-Feb-03 01:29:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.937 0.871 0.896 1.037 2011-Feb-03 01:29:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.031 0.036 1.117 0.043 2011-Feb-03 01:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.122 (still bad) 2011-Feb-03 01:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 01:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:30:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:30:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.915 1.048 1.013 0.909 2011-Feb-03 01:30:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 1.110 0.916 1.080 2011-Feb-03 01:30:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.936 0.870 0.897 1.037 2011-Feb-03 01:30:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.034 0.036 1.118 0.043 2011-Feb-03 01:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:31:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:31:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:31:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.912 1.045 1.012 0.906 2011-Feb-03 01:31:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 1.108 0.918 1.080 2011-Feb-03 01:31:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.938 0.869 0.895 1.038 2011-Feb-03 01:31:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.031 0.036 1.115 0.043 2011-Feb-03 01:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.123 (still bad) 2011-Feb-03 01:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.122 (still bad) 2011-Feb-03 01:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.122 (still bad) 2011-Feb-03 01:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 01:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.122 (still bad) 2011-Feb-03 01:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.121 (still bad) 2011-Feb-03 01:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 01:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 01:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:32:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:32:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.910 1.045 1.011 0.907 2011-Feb-03 01:32:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.941 1.108 0.917 1.080 2011-Feb-03 01:32:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.935 0.867 0.895 1.037 2011-Feb-03 01:32:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.027 0.036 1.112 0.043 2011-Feb-03 01:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 01:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.122 (still bad) 2011-Feb-03 01:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 01:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 01:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 01:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.121 (still bad) 2011-Feb-03 01:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 01:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 01:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.121 (still bad) 2011-Feb-03 01:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 01:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 01:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 01:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 01:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:33:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:33:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.910 1.044 1.015 0.913 2011-Feb-03 01:33:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 1.107 0.916 1.081 2011-Feb-03 01:33:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.936 0.869 0.896 1.039 2011-Feb-03 01:33:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.036 1.115 0.043 2011-Feb-03 01:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 01:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 01:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:34:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:34:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.912 1.047 1.018 0.913 2011-Feb-03 01:34:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 1.111 0.917 1.079 2011-Feb-03 01:34:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.938 0.873 0.902 1.044 2011-Feb-03 01:34:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.036 1.113 0.043 2011-Feb-03 01:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.118 (still bad) 2011-Feb-03 01:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.125 (still bad) 2011-Feb-03 01:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 01:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 01:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 01:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 01:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:36:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:36:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.915 1.051 1.015 0.910 2011-Feb-03 01:36:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 1.116 0.924 1.087 2011-Feb-03 01:36:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.936 0.872 0.900 1.041 2011-Feb-03 01:36:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.032 0.036 1.116 0.043 2011-Feb-03 01:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:36:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.123 (still bad) 2011-Feb-03 01:37:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:37:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.915 1.051 1.012 0.910 2011-Feb-03 01:37:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 1.111 0.918 1.080 2011-Feb-03 01:37:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.945 0.878 0.896 1.041 2011-Feb-03 01:37:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.029 0.036 1.114 0.043 2011-Feb-03 01:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.122 (still bad) 2011-Feb-03 01:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.122 (still bad) 2011-Feb-03 01:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.125 (still bad) 2011-Feb-03 01:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.122 (still bad) 2011-Feb-03 01:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.123 (still bad) 2011-Feb-03 01:38:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:38:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.911 1.049 1.012 0.911 2011-Feb-03 01:38:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 1.110 0.916 1.081 2011-Feb-03 01:38:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.938 0.872 0.896 1.042 2011-Feb-03 01:38:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.036 1.114 0.043 2011-Feb-03 01:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.122 (still bad) 2011-Feb-03 01:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.123 (still bad) 2011-Feb-03 01:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:38:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 01:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 01:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 01:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 01:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 01:39:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:39:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.910 1.043 1.013 0.909 2011-Feb-03 01:39:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.941 1.114 0.918 1.080 2011-Feb-03 01:39:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.937 0.869 0.897 1.045 2011-Feb-03 01:39:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.032 0.036 1.119 0.043 2011-Feb-03 01:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.126 (still bad) 2011-Feb-03 01:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.122 (still bad) 2011-Feb-03 01:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.123 (still bad) 2011-Feb-03 01:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:39:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:40:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:40:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.914 1.047 1.013 0.908 2011-Feb-03 01:40:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.942 1.110 0.918 1.079 2011-Feb-03 01:40:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.940 0.871 0.901 1.045 2011-Feb-03 01:40:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.036 1.116 0.043 2011-Feb-03 01:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.122 (still bad) 2011-Feb-03 01:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.123 (still bad) 2011-Feb-03 01:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 01:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:41:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:41:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.910 1.049 1.013 0.909 2011-Feb-03 01:41:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.940 1.112 0.917 1.078 2011-Feb-03 01:41:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.935 0.869 0.897 1.043 2011-Feb-03 01:41:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.036 1.112 0.043 2011-Feb-03 01:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 01:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 01:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 01:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.117 (still bad) 2011-Feb-03 01:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 01:42:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:42:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.912 1.047 1.013 0.910 2011-Feb-03 01:42:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.947 1.121 0.921 1.082 2011-Feb-03 01:42:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.934 0.870 0.897 1.045 2011-Feb-03 01:42:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.036 1.114 0.043 2011-Feb-03 01:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.128 (still bad) 2011-Feb-03 01:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.141 (still bad) 2011-Feb-03 01:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.136 (still bad) 2011-Feb-03 01:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.140 (still bad) 2011-Feb-03 01:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.138 (still bad) 2011-Feb-03 01:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.132 (still bad) 2011-Feb-03 01:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 01:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.131 (still bad) 2011-Feb-03 01:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.137 (still bad) 2011-Feb-03 01:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.143 (still bad) 2011-Feb-03 01:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.153 (still bad) 2011-Feb-03 01:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.155 (still bad) 2011-Feb-03 01:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.154 (still bad) 2011-Feb-03 01:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.152 (still bad) 2011-Feb-03 01:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.144 (still bad) 2011-Feb-03 01:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.134 (still bad) 2011-Feb-03 01:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 01:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 01:43:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:43:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.912 1.050 1.011 0.908 2011-Feb-03 01:43:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 1.110 0.917 1.078 2011-Feb-03 01:43:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.933 0.870 0.897 1.045 2011-Feb-03 01:43:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.031 0.036 1.117 0.043 2011-Feb-03 01:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 01:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.119 (still bad) 2011-Feb-03 01:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 01:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.121 (still bad) 2011-Feb-03 01:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.122 (still bad) 2011-Feb-03 01:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:44:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.037 < 0.75)! 2011-Feb-03 01:44:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.923 1.061 1.022 0.915 2011-Feb-03 01:44:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.942 1.118 0.932 1.096 2011-Feb-03 01:44:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.944 0.880 0.904 1.052 2011-Feb-03 01:44:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.037 0.037 1.124 0.044 2011-Feb-03 01:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.122 (still bad) 2011-Feb-03 01:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.122 (still bad) 2011-Feb-03 01:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 01:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.122 (still bad) 2011-Feb-03 01:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.122 (still bad) 2011-Feb-03 01:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 01:45:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:45:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 1.061 1.022 0.920 2011-Feb-03 01:45:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 1.128 0.926 1.089 2011-Feb-03 01:45:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.936 0.873 0.900 1.048 2011-Feb-03 01:45:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.031 0.036 1.117 0.043 2011-Feb-03 01:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.133 (still bad) 2011-Feb-03 01:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.140 (still bad) 2011-Feb-03 01:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.149 (still bad) 2011-Feb-03 01:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.162 (still bad) 2011-Feb-03 01:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.169 (still bad) 2011-Feb-03 01:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.170 (still bad) 2011-Feb-03 01:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.174 (still bad) 2011-Feb-03 01:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.155 (still bad) 2011-Feb-03 01:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.142 (still bad) 2011-Feb-03 01:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 01:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 01:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 01:46:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:46:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.916 1.051 1.016 0.909 2011-Feb-03 01:46:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 1.113 0.926 1.090 2011-Feb-03 01:46:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.952 0.886 0.903 1.049 2011-Feb-03 01:46:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 0.036 1.128 0.043 2011-Feb-03 01:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 01:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 01:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.123 (still bad) 2011-Feb-03 01:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 01:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.121 (still bad) 2011-Feb-03 01:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.125 (still bad) 2011-Feb-03 01:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.125 (still bad) 2011-Feb-03 01:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:47:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:47:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.915 1.050 1.024 0.919 2011-Feb-03 01:47:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.933 1.111 0.921 1.085 2011-Feb-03 01:47:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.938 0.876 0.899 1.048 2011-Feb-03 01:47:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.036 1.115 0.043 2011-Feb-03 01:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.124 (still bad) 2011-Feb-03 01:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.123 (still bad) 2011-Feb-03 01:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 01:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 01:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 01:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 01:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.140 (still bad) 2011-Feb-03 01:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 01:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 01:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 01:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.125 (still bad) 2011-Feb-03 01:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.123 (still bad) 2011-Feb-03 01:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 01:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 01:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.128 (still bad) 2011-Feb-03 01:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:48:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:48:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.914 1.052 1.014 0.911 2011-Feb-03 01:48:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 1.110 0.924 1.086 2011-Feb-03 01:48:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.938 0.873 0.897 1.046 2011-Feb-03 01:48:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.032 0.036 1.118 0.043 2011-Feb-03 01:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.123 (still bad) 2011-Feb-03 01:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 01:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 01:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 01:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 01:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.121 (still bad) 2011-Feb-03 01:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 01:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 01:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.120 (still bad) 2011-Feb-03 01:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:49:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 01:49:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.915 1.052 1.018 0.910 2011-Feb-03 01:49:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 1.110 0.922 1.082 2011-Feb-03 01:49:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.937 0.872 0.902 1.047 2011-Feb-03 01:49:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.031 0.036 1.116 0.043 2011-Feb-03 01:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 01:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:49:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 01:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:49:29 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Feb-03 01:49:29 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Feb-03 01:49:29 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Feb-03 01:49:29 LOG5 end_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2011-Feb-03 01:49:29 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Feb-03 01:49:29 LOG5 end_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2011-Feb-03 01:49:29 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Feb-03 01:49:29 LOG5 finish_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2011-Feb-03 01:49:29 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Feb-03 01:49:29 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Feb-03 01:49:29 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Feb-03 01:49:29 LOG5 end_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2011-Feb-03 01:49:29 COMMAND run_command_line: EXECUTING command 51: 'ENDIF' 2011-Feb-03 01:49:29 COMMAND run_command_line: EXECUTING command 54: 'IF LSTSLEW(AGES3193_p2_116) < 101638 THEN' 2011-Feb-03 01:49:29 LOG3 is_if_valid: Current source data: up 118.5 5.6 UP - - 62 2.6 2011-Feb-03 01:49:29 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p2_116) < 101638 2011-Feb-03 01:49:29 INFO5 is_if_valid: Condition parsed as: 10.288492333333332 < 10.277222222222223 2011-Feb-03 01:49:29 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGES3193_p2_116) < 101638 THEN' 2011-Feb-03 01:49:29 COMMAND run_command_line: EXECUTING command 55: 'FIXEDDRIFT az=116.58 alfaangle=81.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_116 ra=95300.00 dec=210030.00' 2011-Feb-03 01:49:29 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=116.58 alfaangle=81.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_116 ra=95300.00 dec=210030.00' in non-true conditional branch 2011-Feb-03 01:49:29 COMMAND run_command_line: EXECUTING command 58: 'ENDIF' 2011-Feb-03 01:49:29 COMMAND run_command_line: EXECUTING command 61: 'IF LSTSLEW(AGES3193_p2_118) < 103938 THEN' 2011-Feb-03 01:49:29 LOG3 is_if_valid: Current source data: up 118.0 5.6 UP - - 62 2.6 2011-Feb-03 01:49:29 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p2_118) < 103938 2011-Feb-03 01:49:29 INFO5 is_if_valid: Condition parsed as: 10.288492333333332 < 10.660555555555556 2011-Feb-03 01:49:29 COMMAND run_command_line: EXECUTING command 62: 'FIXEDDRIFT az=105.13 alfaangle=-83.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_118 ra=95300.00 dec=205730.00' 2011-Feb-03 01:49:30 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Feb-03 01:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 01:49:30 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Feb-03 01:49:30 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 105.13 -83.9 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p2_118 95300.00 205730.00 J 8500.0 Heliocentric velocity(optical)' 2011-Feb-03 01:49:30 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Feb-03 01:49:30 LOG5 begin_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2011-Feb-03 01:49:30 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p2_114' 2011-Feb-03 01:49:30 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Feb-03 01:49:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_118} 2011-Feb-03 01:49:30 INFO3 fixed_driftmap: Sending telescope to Az = 105.13 and ZA = 11.13 2011-Feb-03 01:49:30 LOG3 track_source: Calling 'track_source AGES3193_p2_118 105.13 11.1260455662 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Feb-03 01:49:30 START begin_task: Starting task 'sending tracking commands' 2011-Feb-03 01:49:30 LOG5 begin_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2011-Feb-03 01:49:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_118} INFO {Slewing to source 'AGES3193_p2_118' ...} 2011-Feb-03 01:49:30 INFO1 track_source: Starting to track AGES3193_p2_118 2011-Feb-03 01:49:30 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_118" 2011-Feb-03 01:49:30 LOG3 vw_send: To DATATAKING: set ra 105.13 2011-Feb-03 01:49:30 LOG3 vw_send: To DATATAKING: set dec 11.1260455662 2011-Feb-03 01:49:30 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Feb-03 01:49:30 LOG3 vw_send: To DATATAKING: pnt tr 105.13 11.1260455662 -CF 2011-Feb-03 01:49:30 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 01:49:30 STOP finish_task: Finishing task 'sending tracking commands' 2011-Feb-03 01:49:30 LOG5 finish_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2011-Feb-03 01:49:30 INFO2 finish_task: DONE finished sending: tracking commands 2011-Feb-03 01:49:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 01:49:30 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Feb-03 01:49:30 LOG5 end_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2011-Feb-03 01:49:30 START begin_task: Starting task 'rotate ALFA to -83.9 degrees' 2011-Feb-03 01:49:30 LOG5 begin_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2011-Feb-03 01:49:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -83.9 degrees ...} 2011-Feb-03 01:49:30 INFO2 rotate_alfa: ALFA commanded to -83.9 degrees 2011-Feb-03 01:49:30 LOG3 sock_errsend: To ALFAMOTOR: POSITION -83.9 REPLY 2011-Feb-03 01:49:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Feb-03 01:49:30 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Feb-03 01:49:30 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2011-Feb-03 01:49:30 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_118" 2011-Feb-03 01:49:30 LOG4 got_cormsg: From DATATAKING: set ra 105.13 2011-Feb-03 01:49:30 LOG4 got_cormsg: From DATATAKING: set dec 11.1260455662 2011-Feb-03 01:49:30 LOG4 got_cormsg: From DATATAKING: vw% 105.13 2011-Feb-03 01:49:30 LOG4 got_cormsg: From DATATAKING: vw% 11.1260455662 2011-Feb-03 01:49:30 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 01:49:30 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Feb-03 01:49:30 LOG4 got_cormsg: From DATATAKING: pnt tr 105.13 11.1260455662 -CF 2011-Feb-03 01:49:30 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 01:49:30 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Feb-03 01:49:30 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 01:50:28 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Feb-03 01:50:28 INFO3 alfa_motor: ALFA rotator in-position -83.90 degrees 2011-Feb-03 01:50:28 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Feb-03 01:50:28 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2011-Feb-03 01:50:28 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Feb-03 01:50:28 STOP finish_task: Finishing task 'rotate ALFA to -83.9 degrees' 2011-Feb-03 01:50:28 LOG5 finish_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2011-Feb-03 01:50:28 INFO2 finish_task: DONE finished configuration: rotating ALFA to -83.9 degrees 2011-Feb-03 01:50:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 01:50:28 STOP end_task: Finishing task 'rotate ALFA to -83.9 degrees' with status 'OK' 2011-Feb-03 01:50:28 LOG5 end_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2011-Feb-03 01:50:29 START begin_task: Starting task 'waiting on telescope' 2011-Feb-03 01:50:29 LOG5 begin_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2011-Feb-03 01:50:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Feb-03 01:50:29 LOG3 waittrk: Start waittrk 5 2011-Feb-03 01:50:29 START begin_task: Starting task 'waiting on telescope movement' 2011-Feb-03 01:50:29 LOG5 begin_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2011-Feb-03 01:50:34 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Feb-03 01:50:34 LOG5 end_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2011-Feb-03 01:50:34 START begin_task: Starting task 'waiting on telescope on source' 2011-Feb-03 01:50:34 LOG5 begin_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2011-Feb-03 01:53:03 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Feb-03 01:53:03 LOG5 end_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2011-Feb-03 01:53:03 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Feb-03 01:53:03 INFO2 waittrk: Now tracking AGES3193_p2_118 2011-Feb-03 01:53:03 LOG4 waittrk: Current telescope position: Az = 104.92 ZA = 11.13 2011-Feb-03 01:53:03 STOP finish_task: Finishing task 'waiting on telescope' 2011-Feb-03 01:53:03 LOG5 finish_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2011-Feb-03 01:53:03 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Feb-03 01:53:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 01:53:03 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Feb-03 01:53:03 LOG5 end_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2011-Feb-03 01:53:03 START begin_task: Starting task 'selecting calibration type' 2011-Feb-03 01:53:03 LOG5 begin_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2011-Feb-03 01:53:03 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Feb-03 01:53:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Feb-03 01:53:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 01:53:03 START begin_task: Starting task 'waiting on setcal' 2011-Feb-03 01:53:03 LOG5 begin_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2011-Feb-03 01:53:03 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Feb-03 01:53:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 01:53:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 01:53:04 LOG4 got_cormsg: From DATATAKING: DONE 2011-Feb-03 01:53:04 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Feb-03 01:53:04 LOG5 end_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2011-Feb-03 01:53:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Feb-03 01:53:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Feb-03 01:53:04 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Feb-03 01:53:04 START begin_task: Starting task 'waiting on command to ALFA' 2011-Feb-03 01:53:04 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2011-Feb-03 01:53:04 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 01:53:05 LOG4 got_alfamon: From ALFAMON: ACK 2011-Feb-03 01:53:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Feb-03 01:53:05 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2011-Feb-03 01:53:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Feb-03 01:53:05 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Feb-03 01:53:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Feb-03 01:53:05 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Feb-03 01:53:05 START begin_task: Starting task 'waiting on command to ALFA' 2011-Feb-03 01:53:05 LOG5 begin_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2011-Feb-03 01:53:05 LOG4 got_alfamon: From ALFAMON: ACK 2011-Feb-03 01:53:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Feb-03 01:53:05 LOG5 end_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2011-Feb-03 01:53:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Feb-03 01:53:05 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Feb-03 01:53:05 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Feb-03 01:53:05 LOG5 end_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2011-Feb-03 01:53:05 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Feb-03 01:53:05 INFO2 astwait: Waiting for 1217 seconds from 05:53:05 to 06:13:22 UTC ... 2011-Feb-03 01:53:05 LOG4 send_obs_status: To obs_status: <1> TASKTIME 1217 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Feb-03 01:53:05 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Feb-03 01:53:05 LOG5 begin_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2011-Feb-03 02:13:22 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Feb-03 02:13:22 LOG5 end_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2011-Feb-03 02:13:22 INFO3 astwait: Finished waiting 2011-Feb-03 02:13:22 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Feb-03 02:13:22 LOG5 dopset_later: Calling 'dopset_later 60.516043128449169' 2011-Feb-03 02:13:22 INFO3 dopset_later: Setting Doppler correction for 02:14:22 (60.5 seconds from now) 2011-Feb-03 02:13:22 LOG5 antvel: Calling 'antvel 105.130000 11.126046 F Heliocentric 60.516043128449169' 2011-Feb-03 02:13:22 LOG2 antvel: Transforming current Az = 105.13 ZA = 11.13 to apparent RA = 09:53:39.5 Dec = +20:54:07.1 2011-Feb-03 02:13:22 LOG2 antvel: Parameters to Doppler: Heliocentric 22462 2011 34 0.0 2011-Feb-03 02:13:22 INFO5 antvel: Computed antenna velocity: -5.03356 km/s 2011-Feb-03 02:13:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-5.0335561990000004 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Feb-03 02:13:22 INFO4 dopset_gen: New sky frequencies: 1381.266620 1381.266620 1381.266620 1381.266620 1381.266620 1381.266620 1381.266620 1381.266620 1381.266620 2011-Feb-03 02:13:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.266620 sky0=1381.266620 sky1=1381.266620 sky2=1381.266620 sky3=1381.266620 sky4=1381.266620 sky5=1381.266620 sky6=1381.266620 sky7=1381.266620 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 02:13:22 LOG2 dopset_gen: Result from 'sky2syn': 1631.266620 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 02:13:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631266620.0} 2011-Feb-03 02:13:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 02:13:22 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Feb-03 02:13:22 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Feb-03 02:13:22 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:04.9 Dec = +20:57:15.8 2011-Feb-03 02:13:22 LOG3 track_source: Calling 'track_source AGES3193_p2_118 095204.9 205715.8 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Feb-03 02:13:22 START begin_task: Starting task 'sending tracking commands' 2011-Feb-03 02:13:22 LOG5 begin_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2011-Feb-03 02:13:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_118} INFO {Slewing to source 'AGES3193_p2_118' ...} 2011-Feb-03 02:13:22 INFO1 track_source: Starting to track AGES3193_p2_118 2011-Feb-03 02:13:22 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_118" 2011-Feb-03 02:13:22 LOG3 vw_send: To DATATAKING: set ra 095204.9 2011-Feb-03 02:13:22 LOG3 vw_send: To DATATAKING: set dec 205715.8 2011-Feb-03 02:13:22 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Feb-03 02:13:22 LOG3 vw_send: To DATATAKING: pnt tr 095204.9 205715.8 -CJ 2011-Feb-03 02:13:22 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 02:13:22 STOP finish_task: Finishing task 'sending tracking commands' 2011-Feb-03 02:13:22 LOG5 finish_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2011-Feb-03 02:13:22 INFO2 finish_task: DONE finished sending: tracking commands 2011-Feb-03 02:13:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 02:13:22 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Feb-03 02:13:22 LOG5 end_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2011-Feb-03 02:13:22 START begin_task: Starting task 'waiting on telescope' 2011-Feb-03 02:13:22 LOG5 begin_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2011-Feb-03 02:13:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Feb-03 02:13:22 LOG3 waittrk: Start waittrk 5 2011-Feb-03 02:13:22 START begin_task: Starting task 'waiting on telescope movement' 2011-Feb-03 02:13:22 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2011-Feb-03 02:13:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631266620.0} 2011-Feb-03 02:13:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 02:13:22 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_118" 2011-Feb-03 02:13:22 LOG4 got_cormsg: From DATATAKING: set ra 095204.9 2011-Feb-03 02:13:22 LOG4 got_cormsg: From DATATAKING: set dec 205715.8 2011-Feb-03 02:13:22 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Feb-03 02:13:22 LOG4 got_cormsg: From DATATAKING: pnt tr 095204.9 205715.8 -CJ 2011-Feb-03 02:13:22 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 02:13:24 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 02:13:24 LOG4 got_cormsg: From DATATAKING: vw% vw% 095204.9 2011-Feb-03 02:13:24 LOG4 got_cormsg: From DATATAKING: vw% 205715.8 2011-Feb-03 02:13:24 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2011-Feb-03 02:13:27 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Feb-03 02:13:27 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2011-Feb-03 02:13:27 START begin_task: Starting task 'waiting on telescope on source' 2011-Feb-03 02:13:27 LOG5 begin_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2011-Feb-03 02:13:27 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Feb-03 02:13:27 LOG5 end_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2011-Feb-03 02:13:27 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Feb-03 02:13:27 INFO2 waittrk: Now tracking AGES3193_p2_118 2011-Feb-03 02:13:27 LOG4 waittrk: Current telescope position: Az = 104.89 ZA = 11.14 2011-Feb-03 02:13:27 STOP finish_task: Finishing task 'waiting on telescope' 2011-Feb-03 02:13:27 LOG5 finish_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2011-Feb-03 02:13:27 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Feb-03 02:13:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 02:13:27 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Feb-03 02:13:27 LOG5 end_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2011-Feb-03 02:13:27 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Feb-03 02:13:27 LOG5 begin_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2011-Feb-03 02:13:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Feb-03 02:13:27 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Feb-03 02:13:27 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Feb-03 02:13:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Feb-03 02:13:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 02:13:27 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Feb-03 02:13:27 LOG5 begin_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2011-Feb-03 02:13:27 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Feb-03 02:13:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 02:13:30 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 02:13:30 LOG4 got_cormsg: From DATATAKING: DONE 2011-Feb-03 02:13:30 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Feb-03 02:13:30 LOG5 end_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2011-Feb-03 02:13:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Feb-03 02:13:30 START begin_task: Starting task 'adjusting WAPP power' 2011-Feb-03 02:13:30 LOG5 begin_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2011-Feb-03 02:13:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Feb-03 02:13:30 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Feb-03 02:13:30 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Feb-03 02:13:30 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Feb-03 02:13:30 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Feb-03 02:13:30 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Feb-03 02:13:30 LOG5 begin_task: Level: (5) ID = <10250> Status = 0 0 0 0 ok 2011-Feb-03 02:13:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Feb-03 02:13:30 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 02:13:31 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 7 dB 2011-Feb-03 02:13:31 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 3 3 dB 2011-Feb-03 02:13:31 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2011-Feb-03 02:13:31 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 4 0 dB 2011-Feb-03 02:13:31 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Feb-03 02:13:31 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Feb-03 02:13:31 LOG5 end_task: Level: (5) ID = <10250> Status = 0 0 0 0 ok 2011-Feb-03 02:13:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.958 1.072 ALFA beam 1: 1.061 0.900 2011-Feb-03 02:13:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.991 1.120 ALFA beam 3: 0.927 1.098 2011-Feb-03 02:13:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.952 0.907 ALFA beam 5: 0.959 1.108 2011-Feb-03 02:13:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.091 0.036 ALFA beam 7: 0.915 0.042 2011-Feb-03 02:13:31 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Feb-03 02:13:31 LOG5 finish_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2011-Feb-03 02:13:31 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Feb-03 02:13:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 02:13:31 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Feb-03 02:13:31 LOG5 end_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2011-Feb-03 02:13:31 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Feb-03 02:13:31 LOG5 begin_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2011-Feb-03 02:13:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Feb-03 02:13:31 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Feb-03 02:13:31 LOG3 socket_wait: To MOCK: ADJP30 2011-Feb-03 02:13:31 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Feb-03 02:13:31 LOG5 begin_task: Level: (5) ID = <10252> Status = 0 0 0 0 ok 2011-Feb-03 02:13:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 02:13:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 1.072 1.061 0.900 2011-Feb-03 02:13:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.991 1.120 0.927 1.098 2011-Feb-03 02:13:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.952 0.907 0.959 1.108 2011-Feb-03 02:13:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.091 0.036 0.915 0.042 2011-Feb-03 02:13:37 INFO3 from_mock: From MOCK: b0s0g0 rms:A 32.8 28.9 B 30.3 30.3 mn:A -0.1 -0.2 B 0.6 0.5 gn: 10 10 2011-Feb-03 02:13:37 INFO3 from_mock: From MOCK: b0s1g0 rms:A 22.0 21.0 B 17.3 18.3 mn:A 0.3 -0.2 B 0.3 0.1 gn: 6 4 2011-Feb-03 02:13:38 INFO3 from_mock: From MOCK: b1s0g0 rms:A 31.4 29.5 B 29.9 26.8 mn:A -0.2 -0.3 B 0.2 -0.0 gn: 9 9 2011-Feb-03 02:13:38 INFO3 from_mock: From MOCK: b1s1g0 rms:A 21.2 19.6 B 22.0 21.9 mn:A -0.1 -0.4 B 0.5 -0.1 gn: 5 5 2011-Feb-03 02:13:38 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.8 28.9 B 29.9 31.2 mn:A -0.2 -0.5 B 0.1 -0.3 gn: 10 11 2011-Feb-03 02:13:38 INFO3 from_mock: From MOCK: b2s1g0 rms:A 25.6 25.9 B 23.2 21.6 mn:A 0.1 -0.2 B -0.1 0.1 gn: 9 7 2011-Feb-03 02:13:38 INFO3 from_mock: From MOCK: b3s0g0 rms:A 30.4 30.2 B 30.4 27.2 mn:A 0.5 0.0 B 0.2 -0.2 gn: 11 11 2011-Feb-03 02:13:38 INFO3 from_mock: From MOCK: b3s1g0 rms:A 23.7 23.1 B 17.5 18.3 mn:A 0.2 0.8 B 0.7 -0.3 gn: 7 5 2011-Feb-03 02:13:38 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.6 29.7 B 30.6 30.8 mn:A -0.3 -0.3 B 0.0 -0.5 gn: 10 14 2011-Feb-03 02:13:38 INFO3 from_mock: From MOCK: b4s1g0 rms:A 20.5 18.4 B 20.6 19.9 mn:A 0.1 -0.2 B -0.1 -0.7 gn: 6 12 2011-Feb-03 02:13:38 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.7 29.1 B 31.7 31.5 mn:A 0.2 -0.2 B 0.2 0.3 gn: 12 12 2011-Feb-03 02:13:38 INFO3 from_mock: From MOCK: b5s1g0 rms:A 19.7 19.2 B 15.2 15.2 mn:A 0.1 0.2 B 0.0 0.1 gn: 6 2 2011-Feb-03 02:13:38 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.2 29.6 B 29.1 29.9 mn:A 0.1 -0.9 B 0.3 -0.5 gn: 12 29 2011-Feb-03 02:13:38 INFO3 from_mock: From MOCK: b6s1g0 rms:A 22.6 20.6 B 29.4 28.5 mn:A -0.3 0.6 B -0.2 -0.2 gn: 9 31 2011-Feb-03 02:13:38 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Feb-03 02:13:38 LOG5 end_task: Level: (5) ID = <10252> Status = 0 0 0 0 ok 2011-Feb-03 02:13:38 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Feb-03 02:13:38 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Feb-03 02:13:38 LOG5 finish_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2011-Feb-03 02:13:38 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Feb-03 02:13:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 02:13:38 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Feb-03 02:13:38 LOG5 end_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2011-Feb-03 02:13:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Feb-03 02:13:38 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Feb-03 02:13:38 LOG5 finish_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2011-Feb-03 02:13:38 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Feb-03 02:13:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 02:13:38 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Feb-03 02:13:38 LOG5 end_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2011-Feb-03 02:13:38 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel Cabrera 2011-Feb-03 02:13:38 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel Cabrera 2011-Feb-03 02:13:38 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel Cabrera 2011-Feb-03 02:13:38 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel Cabrera 2011-Feb-03 02:13:38 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Feb-03 02:13:38 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Feb-03 02:13:38 LOG5 begin_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2011-Feb-03 02:13:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Feb-03 02:13:38 START begin_task: Starting task 'selecting calibration type' 2011-Feb-03 02:13:38 LOG5 begin_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2011-Feb-03 02:13:38 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Feb-03 02:13:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Feb-03 02:13:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 02:13:38 START begin_task: Starting task 'waiting on setcal' 2011-Feb-03 02:13:38 LOG5 begin_task: Level: (5) ID = <10255> Status = 0 0 0 0 ok 2011-Feb-03 02:13:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2011-Feb-03 02:13:38 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Feb-03 02:13:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 02:13:38 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 02:13:38 LOG4 got_cormsg: From DATATAKING: DONE 2011-Feb-03 02:13:38 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Feb-03 02:13:38 LOG5 end_task: Level: (5) ID = <10255> Status = 0 0 0 0 ok 2011-Feb-03 02:13:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Feb-03 02:13:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Feb-03 02:13:38 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Feb-03 02:13:38 START begin_task: Starting task 'waiting on command to ALFA' 2011-Feb-03 02:13:38 LOG5 begin_task: Level: (5) ID = <10256> Status = 0 0 0 0 ok 2011-Feb-03 02:13:38 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 02:13:39 LOG4 got_alfamon: From ALFAMON: ACK 2011-Feb-03 02:13:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Feb-03 02:13:39 LOG5 end_task: Level: (5) ID = <10256> Status = 0 0 0 0 ok 2011-Feb-03 02:13:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Feb-03 02:13:39 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Feb-03 02:13:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Feb-03 02:13:39 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Feb-03 02:13:39 START begin_task: Starting task 'waiting on command to ALFA' 2011-Feb-03 02:13:39 LOG5 begin_task: Level: (5) ID = <10257> Status = 0 0 0 0 ok 2011-Feb-03 02:13:39 LOG4 got_alfamon: From ALFAMON: ACK 2011-Feb-03 02:13:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Feb-03 02:13:39 LOG5 end_task: Level: (5) ID = <10257> Status = 0 0 0 0 ok 2011-Feb-03 02:13:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Feb-03 02:13:39 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Feb-03 02:13:39 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Feb-03 02:13:39 LOG5 end_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2011-Feb-03 02:13:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Feb-03 02:13:39 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Feb-03 02:13:39 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Feb-03 02:13:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Feb-03 02:13:39 LOG5 begin_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2011-Feb-03 02:13:39 LOG3 CALCONTROL-caltrig: Software trigger 2011-Feb-03 02:13:39 NOTE WAPPDATA-new_file: New FITS file: wapp.20110203.a2048.0004.fits 2011-Feb-03 02:13:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Feb-03 02:13:39 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20110203.a2048.0004.fits} 2011-Feb-03 02:13:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Feb-03 02:13:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Feb-03 02:13:39 LOG5 end_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2011-Feb-03 02:13:39 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Feb-03 02:13:39 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Feb-03 02:13:39 LOG5 begin_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2011-Feb-03 02:13:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Feb-03 02:13:39 LOG5 log_alfabeam: Parameters: 9.8680277777777761 20.954388888888886 10.649040 2011.0933410018506 -83.900002 2011-Feb-03 02:13:39 LOG4 log_alfabeam: ALFABEAM 0 9.868027777777778 20.954388888888886 2011-Feb-03 02:13:39 LOG4 log_alfabeam: ALFABEAM 1 9.866178841745821 21.044983638983435 2011-Feb-03 02:13:39 LOG4 log_alfabeam: ALFABEAM 2 9.860732950690201 20.984471835490424 2011-Feb-03 02:13:39 LOG4 log_alfabeam: ALFABEAM 3 9.862620260931525 20.893606039811225 2011-Feb-03 02:13:39 LOG4 log_alfabeam: ALFABEAM 4 9.869926447269897 20.864296154032711 2011-Feb-03 02:13:39 LOG4 log_alfabeam: ALFABEAM 5 9.875322770610770 20.924413063061877 2011-Feb-03 02:13:39 LOG4 log_alfabeam: ALFABEAM 6 9.873462092054341 21.014235761052518 2011-Feb-03 02:13:39 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Feb-03 02:13:39 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Feb-03 02:13:39 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Feb-03 02:13:39 LOG3 take_mock_data: PSET configuration: object=AGES3193_p2_118 2011-Feb-03 02:13:39 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Feb-03 02:13:39 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Feb-03 02:13:39 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Feb-03 02:13:39 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Feb-03 02:13:39 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Feb-03 02:13:39 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Feb-03 02:13:39 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Feb-03 02:13:39 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Feb-03 02:13:39 LOG3 take_mock_data: PSET configuration: patternid=103400046 2011-Feb-03 02:13:39 LOG3 take_mock_data: PSET configuration: scanid=103400047 2011-Feb-03 02:13:39 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Feb-03 02:13:39 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Feb-03 02:13:39 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Feb-03 02:13:39 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456266620.0 2011-Feb-03 02:13:39 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306266620.0 2011-Feb-03 02:13:39 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Feb-03 02:13:39 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Feb-03 02:13:39 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGES3193_p2_118:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=103400046:scanid=103400047:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456266620.0:topobfreqhz=1306266620.0:filetype=1 2011-Feb-03 02:13:39 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Feb-03 02:13:39 LOG5 begin_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2011-Feb-03 02:13:39 LOG4 from_mock: From MOCK: psetok 2011-Feb-03 02:13:39 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Feb-03 02:13:39 LOG5 end_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2011-Feb-03 02:13:39 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Feb-03 02:13:39 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Feb-03 02:13:39 LOG3 socket_wait: To MOCK: STAR5 2011-Feb-03 02:13:39 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Feb-03 02:13:39 LOG5 begin_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2011-Feb-03 02:13:39 LOG4 from_mock: From MOCK: starok 2011-Feb-03 02:13:39 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Feb-03 02:13:39 LOG5 end_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2011-Feb-03 02:13:39 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Feb-03 02:13:39 INFO2 take_data: Starting WAPP+Mock 5-second scan: 103400047 2011-Feb-03 02:13:40 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Feb-03 02:13:40 LOG5 begin_task: Level: (5) ID = <10262> Status = 0 0 0 0 ok 2011-Feb-03 02:13:40 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Feb-03 02:13:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 02:13:40 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Feb-03 02:13:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Feb-03 02:13:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22421.00 2011-Feb-03 02:13:42 INFO2 got_mock_message: Mock spectrometer start file number is 00900 2011-Feb-03 02:13:42 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Feb-03 02:13:42 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Feb-03 02:13:42 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Feb-03 02:13:42 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Feb-03 02:13:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Feb-03 02:13:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2011-Feb-03 02:13:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Feb-03 02:13:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Feb-03 02:13:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Feb-03 02:13:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Feb-03 02:13:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Feb-03 02:13:42 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Feb-03 02:13:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2011-Feb-03 02:13:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2011-Feb-03 02:13:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2011-Feb-03 02:13:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2011-Feb-03 02:13:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2011-Feb-03 02:13:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2011-Feb-03 02:13:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2011-Feb-03 02:13:45 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:13:45.01 2011-Feb-03 02:13:45 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1296713625.01 Thu Feb 3 02:13:45 2011 2011-Feb-03 02:13:45 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Feb-03 02:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.266620 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 02:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.266620 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.266620 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.266620 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.496 (still bad) 2011-Feb-03 02:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.266620 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.266620 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.266620 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.266620 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.266620 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:13:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 02:13:51 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Feb-03 02:13:51 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Feb-03 02:13:51 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Feb-03 02:13:51 LOG5 end_task: Level: (5) ID = <10262> Status = 0 0 0 0 ok 2011-Feb-03 02:13:51 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Feb-03 02:13:51 LOG5 end_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2011-Feb-03 02:13:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Feb-03 02:13:51 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Feb-03 02:13:51 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Feb-03 02:13:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Feb-03 02:13:51 LOG5 begin_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2011-Feb-03 02:13:51 LOG3 CALCONTROL-caltrig: Software trigger 2011-Feb-03 02:13:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Feb-03 02:13:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Feb-03 02:13:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Feb-03 02:13:51 LOG5 end_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2011-Feb-03 02:13:51 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Feb-03 02:13:51 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Feb-03 02:13:51 LOG5 begin_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2011-Feb-03 02:13:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Feb-03 02:13:51 LOG5 log_alfabeam: Parameters: 9.8680277777777761 20.954388888888886 10.652382 2011.0933413821076 -83.900002 2011-Feb-03 02:13:51 LOG4 log_alfabeam: ALFABEAM 0 9.868027777777780 20.954388888888882 2011-Feb-03 02:13:51 LOG4 log_alfabeam: ALFABEAM 1 9.866171550208289 21.044953776880746 2011-Feb-03 02:13:51 LOG4 log_alfabeam: ALFABEAM 2 9.860730567220017 20.984358019507965 2011-Feb-03 02:13:51 LOG4 log_alfabeam: ALFABEAM 3 9.862625032147237 20.893523877668866 2011-Feb-03 02:13:51 LOG4 log_alfabeam: ALFABEAM 4 9.869933472554349 20.864324658384866 2011-Feb-03 02:13:51 LOG4 log_alfabeam: ALFABEAM 5 9.875325137239987 20.924526138519990 2011-Feb-03 02:13:51 LOG4 log_alfabeam: ALFABEAM 6 9.873457299713481 21.014322107285853 2011-Feb-03 02:13:51 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Feb-03 02:13:51 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Feb-03 02:13:51 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Feb-03 02:13:51 LOG3 take_mock_data: PSET configuration: object=AGES3193_p2_118 2011-Feb-03 02:13:51 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Feb-03 02:13:51 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Feb-03 02:13:51 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Feb-03 02:13:51 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Feb-03 02:13:51 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Feb-03 02:13:51 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Feb-03 02:13:51 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Feb-03 02:13:51 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Feb-03 02:13:51 LOG3 take_mock_data: PSET configuration: patternid=103400046 2011-Feb-03 02:13:51 LOG3 take_mock_data: PSET configuration: scanid=103400048 2011-Feb-03 02:13:51 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Feb-03 02:13:51 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Feb-03 02:13:51 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Feb-03 02:13:51 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456266620.0 2011-Feb-03 02:13:51 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306266620.0 2011-Feb-03 02:13:51 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Feb-03 02:13:51 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Feb-03 02:13:51 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGES3193_p2_118:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=103400046:scanid=103400048:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456266620.0:topobfreqhz=1306266620.0:filetype=1 2011-Feb-03 02:13:51 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Feb-03 02:13:51 LOG5 begin_task: Level: (5) ID = <10265> Status = 0 0 0 0 ok 2011-Feb-03 02:13:51 LOG4 from_mock: From MOCK: psetok 2011-Feb-03 02:13:51 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Feb-03 02:13:51 LOG5 end_task: Level: (5) ID = <10265> Status = 0 0 0 0 ok 2011-Feb-03 02:13:51 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Feb-03 02:13:51 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Feb-03 02:13:51 LOG3 socket_wait: To MOCK: STAR5 2011-Feb-03 02:13:51 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Feb-03 02:13:51 LOG5 begin_task: Level: (5) ID = <10266> Status = 0 0 0 0 ok 2011-Feb-03 02:13:51 LOG4 from_mock: From MOCK: starok 2011-Feb-03 02:13:51 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Feb-03 02:13:51 LOG5 end_task: Level: (5) ID = <10266> Status = 0 0 0 0 ok 2011-Feb-03 02:13:51 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Feb-03 02:13:51 INFO2 take_data: Starting WAPP+Mock 5-second scan: 103400048 2011-Feb-03 02:13:51 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Feb-03 02:13:51 LOG5 begin_task: Level: (5) ID = <10267> Status = 0 0 0 0 ok 2011-Feb-03 02:13:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 02:13:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Feb-03 02:13:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22432.00 2011-Feb-03 02:13:52 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Feb-03 02:13:52 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Feb-03 02:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.551 (still bad) 2011-Feb-03 02:13:54 INFO2 got_mock_message: Mock spectrometer start file number is 01000 2011-Feb-03 02:13:54 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Feb-03 02:13:54 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Feb-03 02:13:54 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Feb-03 02:13:54 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Feb-03 02:13:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Feb-03 02:13:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2011-Feb-03 02:13:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Feb-03 02:13:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Feb-03 02:13:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Feb-03 02:13:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Feb-03 02:13:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Feb-03 02:13:54 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Feb-03 02:13:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2011-Feb-03 02:13:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2011-Feb-03 02:13:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2011-Feb-03 02:13:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2011-Feb-03 02:13:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2011-Feb-03 02:13:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2011-Feb-03 02:13:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2011-Feb-03 02:13:57 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:13:57.01 2011-Feb-03 02:13:57 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1296713637.01 Thu Feb 3 02:13:57 2011 2011-Feb-03 02:13:57 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Feb-03 02:13:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.266620 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 02:13:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.266620 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:13:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.266620 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:13:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.266620 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:13:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.266620 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:13:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.266620 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:13:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.266620 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:13:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.266620 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:13:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.266620 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:13:57 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Feb-03 02:13:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 02:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 02:14:03 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Feb-03 02:14:03 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Feb-03 02:14:03 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Feb-03 02:14:03 LOG5 end_task: Level: (5) ID = <10267> Status = 0 0 0 0 ok 2011-Feb-03 02:14:03 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Feb-03 02:14:03 LOG5 end_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2011-Feb-03 02:14:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Feb-03 02:14:03 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Feb-03 02:14:03 LOG5 finish_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2011-Feb-03 02:14:03 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Feb-03 02:14:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 02:14:03 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Feb-03 02:14:03 LOG5 end_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2011-Feb-03 02:14:03 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Feb-03 02:14:03 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 105.13 and ZA = 11.13 2011-Feb-03 02:14:03 LOG3 track_source: Calling 'track_source AGES3193_p2_118 105.13 11.1260455662 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Feb-03 02:14:03 START begin_task: Starting task 'sending tracking commands' 2011-Feb-03 02:14:03 LOG5 begin_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2011-Feb-03 02:14:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_118} INFO {Slewing to source 'AGES3193_p2_118' ...} 2011-Feb-03 02:14:03 INFO1 track_source: Starting to track AGES3193_p2_118 2011-Feb-03 02:14:03 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_118" 2011-Feb-03 02:14:03 LOG3 vw_send: To DATATAKING: set ra 105.13 2011-Feb-03 02:14:03 LOG3 vw_send: To DATATAKING: set dec 11.1260455662 2011-Feb-03 02:14:03 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Feb-03 02:14:03 LOG3 vw_send: To DATATAKING: pnt tr 105.13 11.1260455662 -CF 2011-Feb-03 02:14:03 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 02:14:03 STOP finish_task: Finishing task 'sending tracking commands' 2011-Feb-03 02:14:03 LOG5 finish_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2011-Feb-03 02:14:03 INFO2 finish_task: DONE finished sending: tracking commands 2011-Feb-03 02:14:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 02:14:03 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Feb-03 02:14:03 LOG5 end_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2011-Feb-03 02:14:03 LOG1 fixed_driftmap: Parameters: HA = +00:46:00.5 Start = 10:39:40.2 LST = 10:39:20.6 diff = 19.6 secs 2011-Feb-03 02:14:03 INFO2 fixed_driftmap: Waiting 17.6 seconds for RA 9:53:40 2011-Feb-03 02:14:03 INFO2 lstwait: Waiting for 17.5 secs from LST 10:39:21 to LST 10:39:38 ... 2011-Feb-03 02:14:03 LOG4 send_obs_status: To obs_status: <1> TASKTIME 17.521756133244921 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Feb-03 02:14:03 START begin_task: Starting task 'waiting on wait on LST' 2011-Feb-03 02:14:03 LOG5 begin_task: Level: (3) ID = <10269> Status = 0 0 0 0 ok 2011-Feb-03 02:14:03 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_118" 2011-Feb-03 02:14:03 LOG4 got_cormsg: From DATATAKING: set ra 105.13 2011-Feb-03 02:14:03 LOG4 got_cormsg: From DATATAKING: set dec 11.1260455662 2011-Feb-03 02:14:03 LOG4 got_cormsg: From DATATAKING: vw% 105.13 2011-Feb-03 02:14:03 LOG4 got_cormsg: From DATATAKING: vw% 11.1260455662 2011-Feb-03 02:14:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 02:14:03 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Feb-03 02:14:03 LOG4 got_cormsg: From DATATAKING: pnt tr 105.13 11.1260455662 -CF 2011-Feb-03 02:14:03 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 02:14:03 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Feb-03 02:14:03 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 02:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 02:14:21 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Feb-03 02:14:21 LOG5 end_task: Level: (3) ID = <10269> Status = 0 0 0 0 ok 2011-Feb-03 02:14:21 LOG4 lstwait: Finished waiting 0.48 seconds late 2011-Feb-03 02:14:21 INFO3 lstwait: Finished waiting 2011-Feb-03 02:14:21 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Feb-03 02:14:21 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Feb-03 02:14:21 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Feb-03 02:14:21 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Feb-03 02:14:21 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Feb-03 02:14:21 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Feb-03 02:14:21 LOG5 begin_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2011-Feb-03 02:14:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Feb-03 02:14:21 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Feb-03 02:14:21 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Feb-03 02:14:21 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Feb-03 02:14:21 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Feb-03 02:14:21 LOG3 take_mock_data: PSET configuration: object=AGES3193_p2_118 2011-Feb-03 02:14:21 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Feb-03 02:14:21 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Feb-03 02:14:21 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Feb-03 02:14:21 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Feb-03 02:14:21 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Feb-03 02:14:21 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Feb-03 02:14:21 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Feb-03 02:14:21 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Feb-03 02:14:21 LOG3 take_mock_data: PSET configuration: patternid=103400049 2011-Feb-03 02:14:21 LOG3 take_mock_data: PSET configuration: scanid=103400049 2011-Feb-03 02:14:21 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Feb-03 02:14:21 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Feb-03 02:14:21 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Feb-03 02:14:21 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456266620.0 2011-Feb-03 02:14:21 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306266620.0 2011-Feb-03 02:14:21 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Feb-03 02:14:21 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Feb-03 02:14:21 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGES3193_p2_118:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=103400049:scanid=103400049:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456266620.0:topobfreqhz=1306266620.0:filetype=1 2011-Feb-03 02:14:21 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Feb-03 02:14:21 LOG5 begin_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2011-Feb-03 02:14:21 LOG4 from_mock: From MOCK: psetok 2011-Feb-03 02:14:21 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Feb-03 02:14:21 LOG5 end_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2011-Feb-03 02:14:21 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Feb-03 02:14:21 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Feb-03 02:14:21 LOG3 socket_wait: To MOCK: STAR1200 2011-Feb-03 02:14:21 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Feb-03 02:14:21 LOG5 begin_task: Level: (4) ID = <10272> Status = 0 0 0 0 ok 2011-Feb-03 02:14:21 LOG4 from_mock: From MOCK: starok 2011-Feb-03 02:14:21 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Feb-03 02:14:21 LOG5 end_task: Level: (4) ID = <10272> Status = 0 0 0 0 ok 2011-Feb-03 02:14:21 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Feb-03 02:14:21 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 103400049 2011-Feb-03 02:14:21 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Feb-03 02:14:21 LOG5 begin_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2011-Feb-03 02:14:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 02:14:21 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Feb-03 02:14:21 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Feb-03 02:14:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Feb-03 02:14:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22462.00 2011-Feb-03 02:14:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.266620 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 02:14:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.266620 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:14:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.266620 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:14:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.266620 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:14:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.266620 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:14:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.266620 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:14:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.266620 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:14:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.266620 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:14:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.266620 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:14:23 INFO2 got_mock_message: Mock spectrometer start file number is 01100 2011-Feb-03 02:14:23 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Feb-03 02:14:23 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1199.9 s 2011-Feb-03 02:14:23 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Feb-03 02:14:23 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Feb-03 02:14:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Feb-03 02:14:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2011-Feb-03 02:14:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Feb-03 02:14:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Feb-03 02:14:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Feb-03 02:14:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Feb-03 02:14:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Feb-03 02:14:23 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Feb-03 02:14:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.16 GB 2011-Feb-03 02:14:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.16 GB 2011-Feb-03 02:14:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.16 GB 2011-Feb-03 02:14:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.16 GB 2011-Feb-03 02:14:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.16 GB 2011-Feb-03 02:14:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.16 GB 2011-Feb-03 02:14:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.16 GB 2011-Feb-03 02:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:14:26 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:14:26.01 2011-Feb-03 02:14:26 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1296713666.01 Thu Feb 3 02:14:26 2011 2011-Feb-03 02:14:26 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Feb-03 02:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.122 (still bad) 2011-Feb-03 02:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:14:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 02:14:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 1.067 1.050 0.890 2011-Feb-03 02:14:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.980 1.116 0.930 1.098 2011-Feb-03 02:14:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.955 0.906 0.952 1.103 2011-Feb-03 02:14:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.092 0.036 0.928 0.042 2011-Feb-03 02:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 02:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.122 (still bad) 2011-Feb-03 02:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.126 (still bad) 2011-Feb-03 02:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 02:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 02:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:15:06 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.123 (still bad) 2011-Feb-03 02:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:15:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:15:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:15:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 02:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:15:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 02:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:15:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 02:15:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.955 1.066 1.055 0.892 2011-Feb-03 02:15:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.980 1.113 0.932 1.100 2011-Feb-03 02:15:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.960 0.913 0.956 1.104 2011-Feb-03 02:15:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.089 0.036 0.927 0.042 2011-Feb-03 02:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 02:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 02:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 02:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:16:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:16:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 02:16:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.956 1.069 1.056 0.893 2011-Feb-03 02:16:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.977 1.114 0.936 1.104 2011-Feb-03 02:16:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.954 0.907 0.954 1.101 2011-Feb-03 02:16:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.090 0.036 0.927 0.042 2011-Feb-03 02:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:16:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:16:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 02:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 02:16:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:16:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:16:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.117 (still bad) 2011-Feb-03 02:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 02:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.115 (still bad) 2011-Feb-03 02:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.115 (still bad) 2011-Feb-03 02:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.118 (still bad) 2011-Feb-03 02:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:17:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 02:17:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.955 1.070 1.052 0.889 2011-Feb-03 02:17:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.981 1.115 0.930 1.101 2011-Feb-03 02:17:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.954 0.906 0.950 1.101 2011-Feb-03 02:17:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.088 0.036 0.926 0.042 2011-Feb-03 02:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 02:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 02:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.123 (still bad) 2011-Feb-03 02:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:18:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 02:18:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.956 1.070 1.053 0.890 2011-Feb-03 02:18:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.979 1.112 0.928 1.098 2011-Feb-03 02:18:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.953 0.908 0.952 1.102 2011-Feb-03 02:18:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.089 0.036 0.927 0.043 2011-Feb-03 02:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.117 (still bad) 2011-Feb-03 02:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.119 (still bad) 2011-Feb-03 02:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 02:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 02:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.131 (still bad) 2011-Feb-03 02:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.140 (still bad) 2011-Feb-03 02:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 02:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 02:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 02:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.115 (still bad) 2011-Feb-03 02:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 02:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.113 (still bad) 2011-Feb-03 02:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:19:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 02:19:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.962 1.077 1.053 0.893 2011-Feb-03 02:19:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.981 1.115 0.933 1.104 2011-Feb-03 02:19:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.955 0.909 0.957 1.109 2011-Feb-03 02:19:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.088 0.036 0.927 0.043 2011-Feb-03 02:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.115 (still bad) 2011-Feb-03 02:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.115 (still bad) 2011-Feb-03 02:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.116 (still bad) 2011-Feb-03 02:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 02:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 02:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.133 (still bad) 2011-Feb-03 02:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.138 (still bad) 2011-Feb-03 02:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.138 (still bad) 2011-Feb-03 02:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.133 (still bad) 2011-Feb-03 02:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 02:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 02:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 02:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:20:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.037 < 0.75)! 2011-Feb-03 02:20:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.967 1.081 1.061 0.899 2011-Feb-03 02:20:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 1.119 0.933 1.102 2011-Feb-03 02:20:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.954 0.907 0.952 1.101 2011-Feb-03 02:20:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.099 0.037 0.936 0.043 2011-Feb-03 02:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 02:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.121 (still bad) 2011-Feb-03 02:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.118 (still bad) 2011-Feb-03 02:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 02:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 02:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.126 (still bad) 2011-Feb-03 02:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 02:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 02:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.129 (still bad) 2011-Feb-03 02:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 02:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 02:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.121 (still bad) 2011-Feb-03 02:21:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 02:21:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.959 1.073 1.053 0.892 2011-Feb-03 02:21:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 1.117 0.930 1.099 2011-Feb-03 02:21:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.956 0.910 0.949 1.099 2011-Feb-03 02:21:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.089 0.036 0.928 0.042 2011-Feb-03 02:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 02:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 02:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 02:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 02:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 02:22:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 02:22:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.956 1.069 1.053 0.891 2011-Feb-03 02:22:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.982 1.117 0.926 1.099 2011-Feb-03 02:22:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.956 0.908 0.950 1.099 2011-Feb-03 02:22:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.091 0.036 0.927 0.042 2011-Feb-03 02:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.116 (still bad) 2011-Feb-03 02:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 02:23:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 02:23:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.955 1.068 1.052 0.893 2011-Feb-03 02:23:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.985 1.117 0.928 1.099 2011-Feb-03 02:23:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.956 0.910 0.953 1.105 2011-Feb-03 02:23:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.090 0.036 0.927 0.042 2011-Feb-03 02:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.115 (still bad) 2011-Feb-03 02:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.119 (still bad) 2011-Feb-03 02:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.119 (still bad) 2011-Feb-03 02:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.117 (still bad) 2011-Feb-03 02:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.117 (still bad) 2011-Feb-03 02:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:24:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 02:24:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 1.073 1.052 0.892 2011-Feb-03 02:24:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.983 1.114 0.929 1.099 2011-Feb-03 02:24:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.956 0.907 0.951 1.102 2011-Feb-03 02:24:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.091 0.036 0.929 0.042 2011-Feb-03 02:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 02:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 02:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 02:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 02:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 02:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 02:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.121 (still bad) 2011-Feb-03 02:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 02:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 02:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.120 (still bad) 2011-Feb-03 02:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.118 (still bad) 2011-Feb-03 02:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:25:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 02:25:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 1.068 1.063 0.899 2011-Feb-03 02:25:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 1.117 0.936 1.103 2011-Feb-03 02:25:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.957 0.908 0.954 1.101 2011-Feb-03 02:25:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.093 0.036 0.930 0.042 2011-Feb-03 02:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.120 (still bad) 2011-Feb-03 02:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.121 (still bad) 2011-Feb-03 02:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.119 (still bad) 2011-Feb-03 02:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.120 (still bad) 2011-Feb-03 02:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 02:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 02:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.118 (still bad) 2011-Feb-03 02:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 02:26:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 02:26:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 1.071 1.053 0.894 2011-Feb-03 02:26:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.982 1.110 0.928 1.098 2011-Feb-03 02:26:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.951 0.902 0.948 1.100 2011-Feb-03 02:26:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.090 0.036 0.929 0.042 2011-Feb-03 02:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 02:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 02:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 02:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 02:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 02:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 02:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 02:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 02:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:27:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 02:27:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 1.072 1.052 0.891 2011-Feb-03 02:27:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.979 1.112 0.929 1.097 2011-Feb-03 02:27:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.953 0.905 0.955 1.105 2011-Feb-03 02:27:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.091 0.036 0.928 0.042 2011-Feb-03 02:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 02:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 02:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 02:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 02:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 02:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.123 (still bad) 2011-Feb-03 02:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 02:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.115 (still bad) 2011-Feb-03 02:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.114 (still bad) 2011-Feb-03 02:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:28:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 02:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 02:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 02:28:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 02:28:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.956 1.070 1.053 0.892 2011-Feb-03 02:28:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.997 1.133 0.934 1.106 2011-Feb-03 02:28:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.954 0.906 0.947 1.100 2011-Feb-03 02:28:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.088 0.036 0.926 0.043 2011-Feb-03 02:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.137 (still bad) 2011-Feb-03 02:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.143 (still bad) 2011-Feb-03 02:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.145 (still bad) 2011-Feb-03 02:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.146 (still bad) 2011-Feb-03 02:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.146 (still bad) 2011-Feb-03 02:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.136 (still bad) 2011-Feb-03 02:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.141 (still bad) 2011-Feb-03 02:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 02:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 02:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.120 (still bad) 2011-Feb-03 02:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 02:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 02:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.118 (still bad) 2011-Feb-03 02:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.114 (still bad) 2011-Feb-03 02:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:29:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 02:29:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.955 1.069 1.054 0.891 2011-Feb-03 02:29:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.979 1.114 0.930 1.098 2011-Feb-03 02:29:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.955 0.907 0.946 1.101 2011-Feb-03 02:29:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.091 0.036 0.927 0.043 2011-Feb-03 02:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.114 (still bad) 2011-Feb-03 02:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.115 (still bad) 2011-Feb-03 02:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:30:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 02:30:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.960 1.077 1.059 0.899 2011-Feb-03 02:30:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.987 1.122 0.934 1.107 2011-Feb-03 02:30:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.955 0.907 0.949 1.100 2011-Feb-03 02:30:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.089 0.036 0.927 0.042 2011-Feb-03 02:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 02:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 02:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 02:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 02:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.132 (still bad) 2011-Feb-03 02:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.136 (still bad) 2011-Feb-03 02:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.132 (still bad) 2011-Feb-03 02:31:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 02:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 02:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.118 (still bad) 2011-Feb-03 02:31:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 02:31:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.961 1.077 1.103 0.934 2011-Feb-03 02:31:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.985 1.117 0.929 1.099 2011-Feb-03 02:31:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.955 0.909 0.952 1.101 2011-Feb-03 02:31:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.093 0.036 0.930 0.042 2011-Feb-03 02:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.122 (still bad) 2011-Feb-03 02:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 02:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 02:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 02:32:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 02:32:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.955 1.071 1.056 0.891 2011-Feb-03 02:32:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.980 1.114 0.932 1.104 2011-Feb-03 02:32:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.954 0.907 0.965 1.116 2011-Feb-03 02:32:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.088 0.036 0.927 0.042 2011-Feb-03 02:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 02:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.120 (still bad) 2011-Feb-03 02:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 02:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 02:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 02:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 02:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 02:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 02:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 02:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 02:33:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 02:33:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.956 1.069 1.056 0.893 2011-Feb-03 02:33:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.982 1.117 0.930 1.100 2011-Feb-03 02:33:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.955 0.910 0.950 1.098 2011-Feb-03 02:33:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.089 0.036 0.927 0.042 2011-Feb-03 02:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 02:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:34:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 02:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:34:27 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Feb-03 02:34:27 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Feb-03 02:34:27 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Feb-03 02:34:27 LOG5 end_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2011-Feb-03 02:34:27 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Feb-03 02:34:27 LOG5 end_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2011-Feb-03 02:34:27 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Feb-03 02:34:27 LOG5 finish_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2011-Feb-03 02:34:27 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Feb-03 02:34:27 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Feb-03 02:34:27 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Feb-03 02:34:27 LOG5 end_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2011-Feb-03 02:34:27 COMMAND run_command_line: EXECUTING command 65: 'ENDIF' 2011-Feb-03 02:34:27 COMMAND run_command_line: EXECUTING command 68: 'IF LSTSLEW(AGESVC1A_p3_020) < 112235 THEN' 2011-Feb-03 02:34:27 LOG3 is_if_valid: Current source data: up 298.0 19.6 UP - - 140 8.0 2011-Feb-03 02:34:27 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1A_p3_020) < 112235 2011-Feb-03 02:34:27 INFO5 is_if_valid: Condition parsed as: 11.129989333333333 < 11.37638888888889 2011-Feb-03 02:34:27 COMMAND run_command_line: EXECUTING command 69: 'FIXEDDRIFT az=309.38 alfaangle=62.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p3_020 ra=120900.00 dec=83130.00' 2011-Feb-03 02:34:27 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Feb-03 02:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:34:28 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Feb-03 02:34:28 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 309.38 62.6 hcorcal 5 tracking no off lcorcal first 1 AGESVC1A_p3_020 120900.00 83130.00 J 8500.0 Heliocentric velocity(optical)' 2011-Feb-03 02:34:28 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Feb-03 02:34:28 LOG5 begin_task: Level: (2) ID = <10274> Status = 0 0 0 0 ok 2011-Feb-03 02:34:28 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p2_118' 2011-Feb-03 02:34:28 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Feb-03 02:34:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p3_020} 2011-Feb-03 02:34:28 INFO3 fixed_driftmap: Sending telescope to Az = 309.38 and ZA = 15.10 2011-Feb-03 02:34:28 LOG3 track_source: Calling 'track_source AGESVC1A_p3_020 309.38 15.1033074818 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Feb-03 02:34:28 START begin_task: Starting task 'sending tracking commands' 2011-Feb-03 02:34:28 LOG5 begin_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2011-Feb-03 02:34:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p3_020} INFO {Slewing to source 'AGESVC1A_p3_020' ...} 2011-Feb-03 02:34:28 INFO1 track_source: Starting to track AGESVC1A_p3_020 2011-Feb-03 02:34:28 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p3_020" 2011-Feb-03 02:34:28 LOG3 vw_send: To DATATAKING: set ra 309.38 2011-Feb-03 02:34:28 LOG3 vw_send: To DATATAKING: set dec 15.1033074818 2011-Feb-03 02:34:28 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Feb-03 02:34:28 LOG3 vw_send: To DATATAKING: pnt tr 309.38 15.1033074818 -CF 2011-Feb-03 02:34:28 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 02:34:28 STOP finish_task: Finishing task 'sending tracking commands' 2011-Feb-03 02:34:28 LOG5 finish_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2011-Feb-03 02:34:28 INFO2 finish_task: DONE finished sending: tracking commands 2011-Feb-03 02:34:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 02:34:28 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Feb-03 02:34:28 LOG5 end_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2011-Feb-03 02:34:28 START begin_task: Starting task 'rotate ALFA to +62.6 degrees' 2011-Feb-03 02:34:28 LOG5 begin_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2011-Feb-03 02:34:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +62.6 degrees ...} 2011-Feb-03 02:34:28 INFO2 rotate_alfa: ALFA commanded to +62.6 degrees 2011-Feb-03 02:34:28 LOG3 sock_errsend: To ALFAMOTOR: POSITION 62.6 REPLY 2011-Feb-03 02:34:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Feb-03 02:34:28 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Feb-03 02:34:28 LOG5 begin_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2011-Feb-03 02:34:28 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p3_020" 2011-Feb-03 02:34:28 LOG4 got_cormsg: From DATATAKING: set ra 309.38 2011-Feb-03 02:34:28 LOG4 got_cormsg: From DATATAKING: set dec 15.1033074818 2011-Feb-03 02:34:28 LOG4 got_cormsg: From DATATAKING: vw% 309.38 2011-Feb-03 02:34:28 LOG4 got_cormsg: From DATATAKING: vw% 15.1033074818 2011-Feb-03 02:34:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 02:34:28 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Feb-03 02:34:28 LOG4 got_cormsg: From DATATAKING: pnt tr 309.38 15.1033074818 -CF 2011-Feb-03 02:34:28 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 02:34:28 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Feb-03 02:34:28 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 02:35:50 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Feb-03 02:35:50 INFO3 alfa_motor: ALFA rotator in-position +62.60 degrees 2011-Feb-03 02:35:50 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Feb-03 02:35:50 LOG5 end_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2011-Feb-03 02:35:50 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Feb-03 02:35:50 STOP finish_task: Finishing task 'rotate ALFA to +62.6 degrees' 2011-Feb-03 02:35:50 LOG5 finish_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2011-Feb-03 02:35:50 INFO2 finish_task: DONE finished configuration: rotating ALFA to +62.6 degrees 2011-Feb-03 02:35:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 02:35:50 STOP end_task: Finishing task 'rotate ALFA to +62.6 degrees' with status 'OK' 2011-Feb-03 02:35:50 LOG5 end_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2011-Feb-03 02:35:50 START begin_task: Starting task 'waiting on telescope' 2011-Feb-03 02:35:50 LOG5 begin_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2011-Feb-03 02:35:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Feb-03 02:35:50 LOG3 waittrk: Start waittrk 5 2011-Feb-03 02:35:50 START begin_task: Starting task 'waiting on telescope movement' 2011-Feb-03 02:35:50 LOG5 begin_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2011-Feb-03 02:35:55 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Feb-03 02:35:55 LOG5 end_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2011-Feb-03 02:35:55 START begin_task: Starting task 'waiting on telescope on source' 2011-Feb-03 02:35:55 LOG5 begin_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2011-Feb-03 02:42:54 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Feb-03 02:42:54 LOG5 end_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2011-Feb-03 02:42:54 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Feb-03 02:42:54 INFO2 waittrk: Now tracking AGESVC1A_p3_020 2011-Feb-03 02:42:54 LOG4 waittrk: Current telescope position: Az = 309.01 ZA = 15.10 2011-Feb-03 02:42:54 STOP finish_task: Finishing task 'waiting on telescope' 2011-Feb-03 02:42:54 LOG5 finish_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2011-Feb-03 02:42:54 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Feb-03 02:42:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 02:42:54 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Feb-03 02:42:54 LOG5 end_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2011-Feb-03 02:42:54 START begin_task: Starting task 'selecting calibration type' 2011-Feb-03 02:42:54 LOG5 begin_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2011-Feb-03 02:42:54 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Feb-03 02:42:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Feb-03 02:42:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 02:42:54 START begin_task: Starting task 'waiting on setcal' 2011-Feb-03 02:42:54 LOG5 begin_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2011-Feb-03 02:42:54 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Feb-03 02:42:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 02:42:55 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 02:42:55 LOG4 got_cormsg: From DATATAKING: DONE 2011-Feb-03 02:42:55 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Feb-03 02:42:55 LOG5 end_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2011-Feb-03 02:42:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Feb-03 02:42:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Feb-03 02:42:55 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Feb-03 02:42:55 START begin_task: Starting task 'waiting on command to ALFA' 2011-Feb-03 02:42:55 LOG5 begin_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2011-Feb-03 02:42:55 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 02:42:55 LOG4 got_alfamon: From ALFAMON: ACK 2011-Feb-03 02:42:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Feb-03 02:42:55 LOG5 end_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2011-Feb-03 02:42:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Feb-03 02:42:56 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Feb-03 02:42:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Feb-03 02:42:56 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Feb-03 02:42:56 START begin_task: Starting task 'waiting on command to ALFA' 2011-Feb-03 02:42:56 LOG5 begin_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2011-Feb-03 02:42:56 LOG4 got_alfamon: From ALFAMON: ACK 2011-Feb-03 02:42:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Feb-03 02:42:56 LOG5 end_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2011-Feb-03 02:42:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Feb-03 02:42:56 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Feb-03 02:42:56 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Feb-03 02:42:56 LOG5 end_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2011-Feb-03 02:42:56 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Feb-03 02:42:56 INFO2 astwait: Waiting for 795 seconds from 06:42:56 to 06:56:11 UTC ... 2011-Feb-03 02:42:56 LOG4 send_obs_status: To obs_status: <1> TASKTIME 795 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Feb-03 02:42:56 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Feb-03 02:42:56 LOG5 begin_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2011-Feb-03 02:56:11 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Feb-03 02:56:11 LOG5 end_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2011-Feb-03 02:56:11 INFO3 astwait: Finished waiting 2011-Feb-03 02:56:11 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Feb-03 02:56:11 LOG5 dopset_later: Calling 'dopset_later 60.692839282589453' 2011-Feb-03 02:56:11 INFO3 dopset_later: Setting Doppler correction for 02:57:11 (60.7 seconds from now) 2011-Feb-03 02:56:11 LOG5 antvel: Calling 'antvel 309.380000 15.103307 F Heliocentric 60.692839282589453' 2011-Feb-03 02:56:11 LOG2 antvel: Transforming current Az = 309.38 ZA = 15.10 to apparent RA = 12:09:35.9 Dec = +08:27:32.3 2011-Feb-03 02:56:11 LOG2 antvel: Parameters to Doppler: Heliocentric 25031 2011 34 0.0 2011-Feb-03 02:56:11 INFO5 antvel: Computed antenna velocity: -21.29297 km/s 2011-Feb-03 02:56:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-21.2929685589 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Feb-03 02:56:11 INFO4 dopset_gen: New sky frequencies: 1381.341539 1381.341539 1381.341539 1381.341539 1381.341539 1381.341539 1381.341539 1381.341539 1381.341539 2011-Feb-03 02:56:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.341539 sky0=1381.341539 sky1=1381.341539 sky2=1381.341539 sky3=1381.341539 sky4=1381.341539 sky5=1381.341539 sky6=1381.341539 sky7=1381.341539 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 02:56:11 LOG2 dopset_gen: Result from 'sky2syn': 1631.341539 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 02:56:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631341539.0} 2011-Feb-03 02:56:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 02:56:11 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Feb-03 02:56:11 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Feb-03 02:56:11 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:04.1 Dec = +08:31:14.5 2011-Feb-03 02:56:11 LOG3 track_source: Calling 'track_source AGESVC1A_p3_020 120804.1 083114.5 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Feb-03 02:56:11 START begin_task: Starting task 'sending tracking commands' 2011-Feb-03 02:56:11 LOG5 begin_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2011-Feb-03 02:56:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p3_020} INFO {Slewing to source 'AGESVC1A_p3_020' ...} 2011-Feb-03 02:56:11 INFO1 track_source: Starting to track AGESVC1A_p3_020 2011-Feb-03 02:56:11 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p3_020" 2011-Feb-03 02:56:11 LOG3 vw_send: To DATATAKING: set ra 120804.1 2011-Feb-03 02:56:11 LOG3 vw_send: To DATATAKING: set dec 083114.5 2011-Feb-03 02:56:11 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Feb-03 02:56:11 LOG3 vw_send: To DATATAKING: pnt tr 120804.1 083114.5 -CJ 2011-Feb-03 02:56:11 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 02:56:11 STOP finish_task: Finishing task 'sending tracking commands' 2011-Feb-03 02:56:11 LOG5 finish_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2011-Feb-03 02:56:11 INFO2 finish_task: DONE finished sending: tracking commands 2011-Feb-03 02:56:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 02:56:11 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Feb-03 02:56:11 LOG5 end_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2011-Feb-03 02:56:11 START begin_task: Starting task 'waiting on telescope' 2011-Feb-03 02:56:11 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2011-Feb-03 02:56:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Feb-03 02:56:11 LOG3 waittrk: Start waittrk 5 2011-Feb-03 02:56:11 START begin_task: Starting task 'waiting on telescope movement' 2011-Feb-03 02:56:11 LOG5 begin_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2011-Feb-03 02:56:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631341539.0} 2011-Feb-03 02:56:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 02:56:11 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p3_020" 2011-Feb-03 02:56:11 LOG4 got_cormsg: From DATATAKING: set ra 120804.1 2011-Feb-03 02:56:11 LOG4 got_cormsg: From DATATAKING: set dec 083114.5 2011-Feb-03 02:56:11 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Feb-03 02:56:11 LOG4 got_cormsg: From DATATAKING: vw% 120804.1 2011-Feb-03 02:56:11 LOG4 got_cormsg: From DATATAKING: vw% 083114.5 2011-Feb-03 02:56:11 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 02:56:11 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Feb-03 02:56:11 LOG4 got_cormsg: From DATATAKING: pnt tr 120804.1 083114.5 -CJ 2011-Feb-03 02:56:11 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 02:56:11 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Feb-03 02:56:11 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 02:56:16 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Feb-03 02:56:16 LOG5 end_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2011-Feb-03 02:56:16 START begin_task: Starting task 'waiting on telescope on source' 2011-Feb-03 02:56:16 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2011-Feb-03 02:56:18 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Feb-03 02:56:18 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2011-Feb-03 02:56:18 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Feb-03 02:56:18 INFO2 waittrk: Now tracking AGESVC1A_p3_020 2011-Feb-03 02:56:18 LOG4 waittrk: Current telescope position: Az = 309.07 ZA = 15.09 2011-Feb-03 02:56:18 STOP finish_task: Finishing task 'waiting on telescope' 2011-Feb-03 02:56:18 LOG5 finish_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2011-Feb-03 02:56:18 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Feb-03 02:56:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 02:56:18 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Feb-03 02:56:18 LOG5 end_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2011-Feb-03 02:56:18 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Feb-03 02:56:18 LOG5 begin_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2011-Feb-03 02:56:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Feb-03 02:56:18 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Feb-03 02:56:18 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Feb-03 02:56:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Feb-03 02:56:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 02:56:18 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Feb-03 02:56:18 LOG5 begin_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2011-Feb-03 02:56:19 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Feb-03 02:56:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 02:56:21 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 02:56:21 LOG4 got_cormsg: From DATATAKING: DONE 2011-Feb-03 02:56:21 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Feb-03 02:56:21 LOG5 end_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2011-Feb-03 02:56:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Feb-03 02:56:21 START begin_task: Starting task 'adjusting WAPP power' 2011-Feb-03 02:56:21 LOG5 begin_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2011-Feb-03 02:56:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Feb-03 02:56:21 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Feb-03 02:56:21 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Feb-03 02:56:21 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Feb-03 02:56:21 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Feb-03 02:56:21 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Feb-03 02:56:21 LOG5 begin_task: Level: (5) ID = <10293> Status = 0 0 0 0 ok 2011-Feb-03 02:56:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Feb-03 02:56:22 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 02:56:22 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 7 dB 2011-Feb-03 02:56:22 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 3 3 dB 2011-Feb-03 02:56:22 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 5 dB --- beam 3: 4 4 dB 2011-Feb-03 02:56:22 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 4 0 dB 2011-Feb-03 02:56:22 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Feb-03 02:56:22 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Feb-03 02:56:22 LOG5 end_task: Level: (5) ID = <10293> Status = 0 0 0 0 ok 2011-Feb-03 02:56:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.975 1.113 ALFA beam 1: 1.089 0.982 2011-Feb-03 02:56:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.072 0.960 ALFA beam 3: 1.013 0.880 2011-Feb-03 02:56:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.018 0.924 ALFA beam 5: 0.963 1.112 2011-Feb-03 02:56:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.105 0.036 ALFA beam 7: 0.941 0.043 2011-Feb-03 02:56:22 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Feb-03 02:56:22 LOG5 finish_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2011-Feb-03 02:56:22 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Feb-03 02:56:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 02:56:22 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Feb-03 02:56:22 LOG5 end_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2011-Feb-03 02:56:22 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Feb-03 02:56:22 LOG5 begin_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2011-Feb-03 02:56:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Feb-03 02:56:22 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Feb-03 02:56:22 LOG3 socket_wait: To MOCK: ADJP30 2011-Feb-03 02:56:22 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Feb-03 02:56:22 LOG5 begin_task: Level: (5) ID = <10295> Status = 0 0 0 0 ok 2011-Feb-03 02:56:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 02:56:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.975 1.113 1.089 0.982 2011-Feb-03 02:56:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.072 0.960 1.013 0.880 2011-Feb-03 02:56:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.018 0.924 0.963 1.112 2011-Feb-03 02:56:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.105 0.036 0.941 0.043 2011-Feb-03 02:56:28 INFO3 from_mock: From MOCK: b0s0g0 rms:A 33.0 29.0 B 30.9 30.9 mn:A -0.0 -0.2 B 0.5 0.5 gn: 10 10 2011-Feb-03 02:56:28 INFO3 from_mock: From MOCK: b0s1g0 rms:A 28.3 27.0 B 21.9 23.1 mn:A 0.2 -0.2 B 0.3 0.1 gn: 9 7 2011-Feb-03 02:56:28 INFO3 from_mock: From MOCK: b1s0g0 rms:A 32.0 30.0 B 31.5 28.2 mn:A -0.1 -0.3 B 0.1 -0.1 gn: 9 9 2011-Feb-03 02:56:28 INFO3 from_mock: From MOCK: b1s1g0 rms:A 31.6 29.1 B 17.9 17.9 mn:A -0.0 -0.4 B 0.4 -0.2 gn: 9 3 2011-Feb-03 02:56:28 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.1 30.1 B 28.0 29.2 mn:A -0.2 -0.5 B 0.1 -0.3 gn: 10 10 2011-Feb-03 02:56:28 INFO3 from_mock: From MOCK: b2s1g0 rms:A 26.8 27.0 B 22.3 20.7 mn:A 0.2 -0.1 B -0.1 0.1 gn: 9 7 2011-Feb-03 02:56:28 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.6 31.4 B 31.0 27.6 mn:A 0.5 -0.0 B 0.2 -0.2 gn: 11 11 2011-Feb-03 02:56:28 INFO3 from_mock: From MOCK: b3s1g0 rms:A 27.5 26.8 B 21.7 22.6 mn:A 0.3 0.8 B 0.5 -0.3 gn: 9 8 2011-Feb-03 02:56:28 INFO3 from_mock: From MOCK: b4s0g0 rms:A 31.3 30.3 B 30.8 31.0 mn:A -0.2 -0.2 B 0.2 -0.4 gn: 10 14 2011-Feb-03 02:56:29 INFO3 from_mock: From MOCK: b4s1g0 rms:A 27.6 24.9 B 28.3 27.3 mn:A 0.1 -0.2 B -0.1 -0.7 gn: 10 16 2011-Feb-03 02:56:29 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.3 28.8 B 31.4 31.3 mn:A 0.3 -0.1 B 0.3 0.4 gn: 12 12 2011-Feb-03 02:56:29 INFO3 from_mock: From MOCK: b5s1g0 rms:A 26.8 26.2 B 23.0 23.1 mn:A -0.1 -0.1 B -0.1 0.1 gn: 11 8 2011-Feb-03 02:56:29 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.2 29.6 B 29.2 30.0 mn:A 0.1 -0.9 B 0.3 -0.4 gn: 12 29 2011-Feb-03 02:56:29 INFO3 from_mock: From MOCK: b6s1g0 rms:A 29.6 26.9 B 29.4 28.5 mn:A -0.5 0.6 B -0.2 -0.1 gn: 12 31 2011-Feb-03 02:56:29 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Feb-03 02:56:29 LOG5 end_task: Level: (5) ID = <10295> Status = 0 0 0 0 ok 2011-Feb-03 02:56:29 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Feb-03 02:56:29 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Feb-03 02:56:29 LOG5 finish_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2011-Feb-03 02:56:29 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Feb-03 02:56:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 02:56:29 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Feb-03 02:56:29 LOG5 end_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2011-Feb-03 02:56:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Feb-03 02:56:29 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Feb-03 02:56:29 LOG5 finish_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2011-Feb-03 02:56:29 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Feb-03 02:56:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 02:56:29 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Feb-03 02:56:29 LOG5 end_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2011-Feb-03 02:56:29 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel Cabrera 2011-Feb-03 02:56:29 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel Cabrera 2011-Feb-03 02:56:29 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel Cabrera 2011-Feb-03 02:56:29 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel Cabrera 2011-Feb-03 02:56:29 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Feb-03 02:56:29 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Feb-03 02:56:29 LOG5 begin_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2011-Feb-03 02:56:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Feb-03 02:56:29 START begin_task: Starting task 'selecting calibration type' 2011-Feb-03 02:56:29 LOG5 begin_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2011-Feb-03 02:56:29 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Feb-03 02:56:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Feb-03 02:56:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 02:56:29 START begin_task: Starting task 'waiting on setcal' 2011-Feb-03 02:56:29 LOG5 begin_task: Level: (5) ID = <10298> Status = 0 0 0 0 ok 2011-Feb-03 02:56:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2011-Feb-03 02:56:29 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Feb-03 02:56:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 02:56:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 02:56:29 LOG4 got_cormsg: From DATATAKING: DONE 2011-Feb-03 02:56:29 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Feb-03 02:56:29 LOG5 end_task: Level: (5) ID = <10298> Status = 0 0 0 0 ok 2011-Feb-03 02:56:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Feb-03 02:56:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Feb-03 02:56:29 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Feb-03 02:56:29 START begin_task: Starting task 'waiting on command to ALFA' 2011-Feb-03 02:56:29 LOG5 begin_task: Level: (5) ID = <10299> Status = 0 0 0 0 ok 2011-Feb-03 02:56:29 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 02:56:29 LOG4 got_alfamon: From ALFAMON: ACK 2011-Feb-03 02:56:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Feb-03 02:56:29 LOG5 end_task: Level: (5) ID = <10299> Status = 0 0 0 0 ok 2011-Feb-03 02:56:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Feb-03 02:56:29 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Feb-03 02:56:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Feb-03 02:56:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Feb-03 02:56:29 START begin_task: Starting task 'waiting on command to ALFA' 2011-Feb-03 02:56:29 LOG5 begin_task: Level: (5) ID = <10300> Status = 0 0 0 0 ok 2011-Feb-03 02:56:29 LOG4 got_alfamon: From ALFAMON: ACK 2011-Feb-03 02:56:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Feb-03 02:56:29 LOG5 end_task: Level: (5) ID = <10300> Status = 0 0 0 0 ok 2011-Feb-03 02:56:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Feb-03 02:56:29 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Feb-03 02:56:29 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Feb-03 02:56:29 LOG5 end_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2011-Feb-03 02:56:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Feb-03 02:56:29 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Feb-03 02:56:29 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Feb-03 02:56:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Feb-03 02:56:29 LOG5 begin_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2011-Feb-03 02:56:30 LOG3 CALCONTROL-caltrig: Software trigger 2011-Feb-03 02:56:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Feb-03 02:56:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Feb-03 02:56:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Feb-03 02:56:30 LOG5 end_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2011-Feb-03 02:56:30 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Feb-03 02:56:30 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Feb-03 02:56:30 LOG5 begin_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2011-Feb-03 02:56:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Feb-03 02:56:30 LOG5 log_alfabeam: Parameters: 12.134472222222223 8.5206944444444446 11.365162 2011.0934224719242 62.599995 2011-Feb-03 02:56:30 LOG4 log_alfabeam: ALFABEAM 0 12.134472222222218 8.520694444444455 2011-Feb-03 02:56:30 LOG4 log_alfabeam: ALFABEAM 1 12.132206318848960 8.617425140411378 2011-Feb-03 02:56:30 LOG4 log_alfabeam: ALFABEAM 2 12.127849671073971 8.553501903198084 2011-Feb-03 02:56:30 LOG4 log_alfabeam: ALFABEAM 3 12.130078326403270 8.456590737537597 2011-Feb-03 02:56:30 LOG4 log_alfabeam: ALFABEAM 4 12.136703089902612 8.423641787516511 2011-Feb-03 02:56:30 LOG4 log_alfabeam: ALFABEAM 5 12.141111363497378 8.488321437414285 2011-Feb-03 02:56:30 LOG4 log_alfabeam: ALFABEAM 6 12.138843208156793 8.585193523259274 2011-Feb-03 02:56:30 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Feb-03 02:56:30 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Feb-03 02:56:30 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Feb-03 02:56:30 LOG3 take_mock_data: PSET configuration: object=AGESVC1A_p3_020 2011-Feb-03 02:56:30 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Feb-03 02:56:30 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Feb-03 02:56:30 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Feb-03 02:56:30 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Feb-03 02:56:30 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Feb-03 02:56:30 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Feb-03 02:56:30 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Feb-03 02:56:30 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Feb-03 02:56:30 LOG3 take_mock_data: PSET configuration: patternid=103400049 2011-Feb-03 02:56:30 LOG3 take_mock_data: PSET configuration: scanid=103400050 2011-Feb-03 02:56:30 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Feb-03 02:56:30 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Feb-03 02:56:30 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Feb-03 02:56:30 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456341539.0 2011-Feb-03 02:56:30 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306341539.0 2011-Feb-03 02:56:30 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Feb-03 02:56:30 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Feb-03 02:56:30 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGESVC1A_p3_020:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=103400049:scanid=103400050:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456341539.0:topobfreqhz=1306341539.0:filetype=1 2011-Feb-03 02:56:30 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Feb-03 02:56:30 LOG5 begin_task: Level: (5) ID = <10303> Status = 0 0 0 0 ok 2011-Feb-03 02:56:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20110203.a2048.0005.fits 2011-Feb-03 02:56:30 LOG4 from_mock: From MOCK: psetok 2011-Feb-03 02:56:30 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Feb-03 02:56:30 LOG5 end_task: Level: (5) ID = <10303> Status = 0 0 0 0 ok 2011-Feb-03 02:56:30 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Feb-03 02:56:30 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Feb-03 02:56:30 LOG3 socket_wait: To MOCK: STAR5 2011-Feb-03 02:56:30 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Feb-03 02:56:30 LOG5 begin_task: Level: (5) ID = <10304> Status = 0 0 0 0 ok 2011-Feb-03 02:56:30 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20110203.a2048.0005.fits} 2011-Feb-03 02:56:30 LOG4 from_mock: From MOCK: starok 2011-Feb-03 02:56:30 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Feb-03 02:56:30 LOG5 end_task: Level: (5) ID = <10304> Status = 0 0 0 0 ok 2011-Feb-03 02:56:30 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Feb-03 02:56:30 INFO2 take_data: Starting WAPP+Mock 5-second scan: 103400050 2011-Feb-03 02:56:30 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Feb-03 02:56:30 LOG5 begin_task: Level: (5) ID = <10305> Status = 0 0 0 0 ok 2011-Feb-03 02:56:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 02:56:30 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Feb-03 02:56:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Feb-03 02:56:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24991.00 2011-Feb-03 02:56:30 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Feb-03 02:56:32 INFO2 got_mock_message: Mock spectrometer start file number is 01200 2011-Feb-03 02:56:32 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Feb-03 02:56:32 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Feb-03 02:56:32 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Feb-03 02:56:32 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Feb-03 02:56:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Feb-03 02:56:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2011-Feb-03 02:56:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Feb-03 02:56:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Feb-03 02:56:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Feb-03 02:56:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Feb-03 02:56:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Feb-03 02:56:32 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Feb-03 02:56:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2011-Feb-03 02:56:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2011-Feb-03 02:56:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2011-Feb-03 02:56:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2011-Feb-03 02:56:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2011-Feb-03 02:56:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2011-Feb-03 02:56:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2011-Feb-03 02:56:35 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:56:35.00 2011-Feb-03 02:56:35 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1296716195.00 Thu Feb 3 02:56:35 2011 2011-Feb-03 02:56:35 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Feb-03 02:56:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.341539 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 02:56:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.341539 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:56:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.341539 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:56:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.341539 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:56:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.341539 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:56:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.341539 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:56:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.341539 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:56:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.341539 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:56:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.341539 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:56:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 02:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.431 (still bad) 2011-Feb-03 02:56:41 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Feb-03 02:56:41 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Feb-03 02:56:41 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Feb-03 02:56:41 LOG5 end_task: Level: (5) ID = <10305> Status = 0 0 0 0 ok 2011-Feb-03 02:56:41 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Feb-03 02:56:41 LOG5 end_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2011-Feb-03 02:56:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Feb-03 02:56:41 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Feb-03 02:56:41 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Feb-03 02:56:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Feb-03 02:56:41 LOG5 begin_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2011-Feb-03 02:56:41 LOG3 CALCONTROL-caltrig: Software trigger 2011-Feb-03 02:56:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Feb-03 02:56:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Feb-03 02:56:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Feb-03 02:56:41 LOG5 end_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2011-Feb-03 02:56:41 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Feb-03 02:56:41 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Feb-03 02:56:41 LOG5 begin_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2011-Feb-03 02:56:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Feb-03 02:56:41 LOG5 log_alfabeam: Parameters: 12.134472222222223 8.5206944444444446 11.368226 2011.0934228204933 62.599995 2011-Feb-03 02:56:41 LOG4 log_alfabeam: ALFABEAM 0 12.134472222222222 8.520694444444436 2011-Feb-03 02:56:41 LOG4 log_alfabeam: ALFABEAM 1 12.132218485682039 8.617487484284824 2011-Feb-03 02:56:41 LOG4 log_alfabeam: ALFABEAM 2 12.127853840008779 8.553686184968194 2011-Feb-03 02:56:41 LOG4 log_alfabeam: ALFABEAM 3 12.130070221629850 8.456713276210783 2011-Feb-03 02:56:41 LOG4 log_alfabeam: ALFABEAM 4 12.136690808822049 8.423579670975922 2011-Feb-03 02:56:41 LOG4 log_alfabeam: ALFABEAM 5 12.141107288507412 8.488137770806158 2011-Feb-03 02:56:41 LOG4 log_alfabeam: ALFABEAM 6 12.138851307134596 8.585072573796456 2011-Feb-03 02:56:41 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Feb-03 02:56:41 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Feb-03 02:56:41 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Feb-03 02:56:41 LOG3 take_mock_data: PSET configuration: object=AGESVC1A_p3_020 2011-Feb-03 02:56:41 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Feb-03 02:56:41 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Feb-03 02:56:41 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Feb-03 02:56:41 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Feb-03 02:56:41 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Feb-03 02:56:41 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Feb-03 02:56:41 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Feb-03 02:56:41 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Feb-03 02:56:41 LOG3 take_mock_data: PSET configuration: patternid=103400049 2011-Feb-03 02:56:41 LOG3 take_mock_data: PSET configuration: scanid=103400051 2011-Feb-03 02:56:41 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Feb-03 02:56:41 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Feb-03 02:56:41 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Feb-03 02:56:41 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456341539.0 2011-Feb-03 02:56:41 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306341539.0 2011-Feb-03 02:56:41 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Feb-03 02:56:41 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Feb-03 02:56:41 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGESVC1A_p3_020:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=103400049:scanid=103400051:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456341539.0:topobfreqhz=1306341539.0:filetype=1 2011-Feb-03 02:56:41 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Feb-03 02:56:41 LOG5 begin_task: Level: (5) ID = <10308> Status = 0 0 0 0 ok 2011-Feb-03 02:56:41 LOG4 from_mock: From MOCK: psetok 2011-Feb-03 02:56:41 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Feb-03 02:56:41 LOG5 end_task: Level: (5) ID = <10308> Status = 0 0 0 0 ok 2011-Feb-03 02:56:41 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Feb-03 02:56:41 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Feb-03 02:56:41 LOG3 socket_wait: To MOCK: STAR5 2011-Feb-03 02:56:41 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Feb-03 02:56:41 LOG5 begin_task: Level: (5) ID = <10309> Status = 0 0 0 0 ok 2011-Feb-03 02:56:41 LOG4 from_mock: From MOCK: starok 2011-Feb-03 02:56:41 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Feb-03 02:56:41 LOG5 end_task: Level: (5) ID = <10309> Status = 0 0 0 0 ok 2011-Feb-03 02:56:41 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Feb-03 02:56:41 INFO2 take_data: Starting WAPP+Mock 5-second scan: 103400051 2011-Feb-03 02:56:41 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Feb-03 02:56:41 LOG5 begin_task: Level: (5) ID = <10310> Status = 0 0 0 0 ok 2011-Feb-03 02:56:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 02:56:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Feb-03 02:56:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25002.00 2011-Feb-03 02:56:42 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Feb-03 02:56:42 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Feb-03 02:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.509 (still bad) 2011-Feb-03 02:56:43 INFO2 got_mock_message: Mock spectrometer start file number is 01300 2011-Feb-03 02:56:43 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Feb-03 02:56:43 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Feb-03 02:56:43 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Feb-03 02:56:43 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Feb-03 02:56:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Feb-03 02:56:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2011-Feb-03 02:56:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Feb-03 02:56:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Feb-03 02:56:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Feb-03 02:56:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Feb-03 02:56:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Feb-03 02:56:44 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Feb-03 02:56:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2011-Feb-03 02:56:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2011-Feb-03 02:56:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2011-Feb-03 02:56:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2011-Feb-03 02:56:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2011-Feb-03 02:56:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2011-Feb-03 02:56:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2011-Feb-03 02:56:47 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:56:47.02 2011-Feb-03 02:56:47 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1296716207.02 Thu Feb 3 02:56:47 2011 2011-Feb-03 02:56:47 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Feb-03 02:56:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.341539 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 02:56:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.341539 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:56:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.341539 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:56:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.341539 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:56:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.341539 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:56:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.341539 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:56:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.341539 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:56:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.341539 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:56:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.341539 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:56:47 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Feb-03 02:56:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 02:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 02:56:53 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Feb-03 02:56:53 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Feb-03 02:56:53 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Feb-03 02:56:53 LOG5 end_task: Level: (5) ID = <10310> Status = 0 0 0 0 ok 2011-Feb-03 02:56:53 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Feb-03 02:56:53 LOG5 end_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2011-Feb-03 02:56:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Feb-03 02:56:53 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Feb-03 02:56:53 LOG5 finish_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2011-Feb-03 02:56:53 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Feb-03 02:56:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 02:56:53 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Feb-03 02:56:53 LOG5 end_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2011-Feb-03 02:56:53 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Feb-03 02:56:53 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 309.38 and ZA = 15.10 2011-Feb-03 02:56:53 LOG3 track_source: Calling 'track_source AGESVC1A_p3_020 309.38 15.1033074818 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Feb-03 02:56:53 START begin_task: Starting task 'sending tracking commands' 2011-Feb-03 02:56:53 LOG5 begin_task: Level: (3) ID = <10311> Status = 0 0 0 0 ok 2011-Feb-03 02:56:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p3_020} INFO {Slewing to source 'AGESVC1A_p3_020' ...} 2011-Feb-03 02:56:53 INFO1 track_source: Starting to track AGESVC1A_p3_020 2011-Feb-03 02:56:53 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p3_020" 2011-Feb-03 02:56:53 LOG3 vw_send: To DATATAKING: set ra 309.38 2011-Feb-03 02:56:53 LOG3 vw_send: To DATATAKING: set dec 15.1033074818 2011-Feb-03 02:56:53 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Feb-03 02:56:53 LOG3 vw_send: To DATATAKING: pnt tr 309.38 15.1033074818 -CF 2011-Feb-03 02:56:53 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 02:56:53 STOP finish_task: Finishing task 'sending tracking commands' 2011-Feb-03 02:56:53 LOG5 finish_task: Level: (3) ID = <10311> Status = 0 0 0 0 ok 2011-Feb-03 02:56:53 INFO2 finish_task: DONE finished sending: tracking commands 2011-Feb-03 02:56:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 02:56:53 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Feb-03 02:56:53 LOG5 end_task: Level: (3) ID = <10311> Status = 0 0 0 0 ok 2011-Feb-03 02:56:53 LOG1 fixed_driftmap: Parameters: HA = -00:46:59.6 Start = 11:22:36.4 LST = 11:22:17.6 diff = 18.7 secs 2011-Feb-03 02:56:53 INFO2 fixed_driftmap: Waiting 16.7 seconds for RA 12:09:36 2011-Feb-03 02:56:53 INFO2 lstwait: Waiting for 16.7 secs from LST 11:22:18 to LST 11:22:34 ... 2011-Feb-03 02:56:53 LOG4 send_obs_status: To obs_status: <1> TASKTIME 16.700484871712383 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Feb-03 02:56:53 START begin_task: Starting task 'waiting on wait on LST' 2011-Feb-03 02:56:53 LOG5 begin_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2011-Feb-03 02:56:53 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p3_020" 2011-Feb-03 02:56:53 LOG4 got_cormsg: From DATATAKING: set ra 309.38 2011-Feb-03 02:56:53 LOG4 got_cormsg: From DATATAKING: set dec 15.1033074818 2011-Feb-03 02:56:53 LOG4 got_cormsg: From DATATAKING: vw% 309.38 2011-Feb-03 02:56:53 LOG4 got_cormsg: From DATATAKING: vw% 15.1033074818 2011-Feb-03 02:56:53 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 02:56:53 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Feb-03 02:56:53 LOG4 got_cormsg: From DATATAKING: pnt tr 309.38 15.1033074818 -CF 2011-Feb-03 02:56:53 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 02:56:53 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Feb-03 02:56:53 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 02:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 02:57:10 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Feb-03 02:57:10 LOG5 end_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2011-Feb-03 02:57:10 LOG4 lstwait: Finished waiting 0.30 seconds late 2011-Feb-03 02:57:10 INFO3 lstwait: Finished waiting 2011-Feb-03 02:57:10 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Feb-03 02:57:10 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Feb-03 02:57:10 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Feb-03 02:57:10 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Feb-03 02:57:10 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Feb-03 02:57:10 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Feb-03 02:57:10 LOG5 begin_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2011-Feb-03 02:57:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Feb-03 02:57:10 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Feb-03 02:57:10 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Feb-03 02:57:10 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Feb-03 02:57:10 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Feb-03 02:57:10 LOG3 take_mock_data: PSET configuration: object=AGESVC1A_p3_020 2011-Feb-03 02:57:10 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Feb-03 02:57:10 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Feb-03 02:57:10 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Feb-03 02:57:10 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Feb-03 02:57:10 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Feb-03 02:57:10 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Feb-03 02:57:10 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Feb-03 02:57:10 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Feb-03 02:57:10 LOG3 take_mock_data: PSET configuration: patternid=103400052 2011-Feb-03 02:57:10 LOG3 take_mock_data: PSET configuration: scanid=103400052 2011-Feb-03 02:57:10 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Feb-03 02:57:10 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Feb-03 02:57:10 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Feb-03 02:57:10 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456341539.0 2011-Feb-03 02:57:10 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306341539.0 2011-Feb-03 02:57:10 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Feb-03 02:57:10 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Feb-03 02:57:10 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGESVC1A_p3_020:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=103400052:scanid=103400052:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456341539.0:topobfreqhz=1306341539.0:filetype=1 2011-Feb-03 02:57:10 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Feb-03 02:57:10 LOG5 begin_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2011-Feb-03 02:57:10 LOG4 from_mock: From MOCK: psetok 2011-Feb-03 02:57:10 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Feb-03 02:57:10 LOG5 end_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2011-Feb-03 02:57:10 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Feb-03 02:57:10 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Feb-03 02:57:10 LOG3 socket_wait: To MOCK: STAR1200 2011-Feb-03 02:57:10 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Feb-03 02:57:10 LOG5 begin_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2011-Feb-03 02:57:10 LOG4 from_mock: From MOCK: starok 2011-Feb-03 02:57:10 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Feb-03 02:57:10 LOG5 end_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2011-Feb-03 02:57:10 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Feb-03 02:57:10 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 103400052 2011-Feb-03 02:57:11 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Feb-03 02:57:11 LOG5 begin_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2011-Feb-03 02:57:11 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Feb-03 02:57:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 02:57:11 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Feb-03 02:57:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Feb-03 02:57:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25032.00 2011-Feb-03 02:57:12 INFO2 got_mock_message: Mock spectrometer start file number is 01400 2011-Feb-03 02:57:12 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Feb-03 02:57:12 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1199.9 s 2011-Feb-03 02:57:12 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Feb-03 02:57:12 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Feb-03 02:57:12 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Feb-03 02:57:12 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2011-Feb-03 02:57:12 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Feb-03 02:57:12 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Feb-03 02:57:12 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Feb-03 02:57:12 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Feb-03 02:57:12 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Feb-03 02:57:12 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Feb-03 02:57:12 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.16 GB 2011-Feb-03 02:57:12 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.16 GB 2011-Feb-03 02:57:12 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.16 GB 2011-Feb-03 02:57:12 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.16 GB 2011-Feb-03 02:57:12 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.16 GB 2011-Feb-03 02:57:12 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.16 GB 2011-Feb-03 02:57:12 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.16 GB 2011-Feb-03 02:57:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.341539 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 02:57:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.341539 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:57:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.341539 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:57:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.341539 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:57:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.341539 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:57:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.341539 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:57:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.341539 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:57:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.341539 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:57:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.341539 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 02:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 02:57:15 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:57:15.01 2011-Feb-03 02:57:15 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1296716235.01 Thu Feb 3 02:57:15 2011 2011-Feb-03 02:57:15 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Feb-03 02:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.107 (still bad) 2011-Feb-03 02:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 02:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 02:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.107 (still bad) 2011-Feb-03 02:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.117 (still bad) 2011-Feb-03 02:57:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 02:57:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.970 1.107 1.084 0.977 2011-Feb-03 02:57:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.063 0.958 0.998 0.890 2011-Feb-03 02:57:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.012 0.918 0.955 1.109 2011-Feb-03 02:57:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 0.036 0.936 0.043 2011-Feb-03 02:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 02:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 02:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 02:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 02:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.117 (still bad) 2011-Feb-03 02:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 02:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.107 (still bad) 2011-Feb-03 02:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 02:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 02:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.119 (still bad) 2011-Feb-03 02:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 02:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 02:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.121 (still bad) 2011-Feb-03 02:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 02:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 02:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 02:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.120 (still bad) 2011-Feb-03 02:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 02:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.121 (still bad) 2011-Feb-03 02:58:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 02:58:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.973 1.111 1.083 0.976 2011-Feb-03 02:58:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.064 0.957 0.998 0.890 2011-Feb-03 02:58:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.013 0.918 0.957 1.110 2011-Feb-03 02:58:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 0.036 0.937 0.043 2011-Feb-03 02:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 02:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 02:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 02:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 02:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:59:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 02:59:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.973 1.114 1.084 0.978 2011-Feb-03 02:59:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.067 0.960 0.995 0.888 2011-Feb-03 02:59:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.011 0.918 0.953 1.110 2011-Feb-03 02:59:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 0.036 0.936 0.043 2011-Feb-03 02:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 02:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 02:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 02:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 02:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 02:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 02:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 02:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 02:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 03:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.107 (still bad) 2011-Feb-03 03:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.115 (still bad) 2011-Feb-03 03:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:00:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 03:00:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.968 1.109 1.083 0.979 2011-Feb-03 03:00:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 0.957 0.996 0.889 2011-Feb-03 03:00:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.011 0.918 0.954 1.108 2011-Feb-03 03:00:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 0.036 0.937 0.043 2011-Feb-03 03:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.106 (still bad) 2011-Feb-03 03:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.107 (still bad) 2011-Feb-03 03:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.107 (still bad) 2011-Feb-03 03:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:01:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 03:01:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.966 1.108 1.082 0.975 2011-Feb-03 03:01:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 0.958 0.996 0.889 2011-Feb-03 03:01:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.012 0.915 0.954 1.111 2011-Feb-03 03:01:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.099 0.036 0.939 0.043 2011-Feb-03 03:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.107 (still bad) 2011-Feb-03 03:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.106 (still bad) 2011-Feb-03 03:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.115 (still bad) 2011-Feb-03 03:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 03:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.121 (still bad) 2011-Feb-03 03:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.126 (still bad) 2011-Feb-03 03:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:02:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 03:02:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.967 1.107 1.081 0.977 2011-Feb-03 03:02:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 0.964 0.995 0.889 2011-Feb-03 03:02:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.010 0.915 0.957 1.112 2011-Feb-03 03:02:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 0.036 0.935 0.043 2011-Feb-03 03:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.131 (still bad) 2011-Feb-03 03:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.134 (still bad) 2011-Feb-03 03:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.148 (still bad) 2011-Feb-03 03:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.162 (still bad) 2011-Feb-03 03:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.166 (still bad) 2011-Feb-03 03:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.167 (still bad) 2011-Feb-03 03:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.170 (still bad) 2011-Feb-03 03:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.152 (still bad) 2011-Feb-03 03:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.135 (still bad) 2011-Feb-03 03:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 03:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.127 (still bad) 2011-Feb-03 03:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 03:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.131 (still bad) 2011-Feb-03 03:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.138 (still bad) 2011-Feb-03 03:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.135 (still bad) 2011-Feb-03 03:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.135 (still bad) 2011-Feb-03 03:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.137 (still bad) 2011-Feb-03 03:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.123 (still bad) 2011-Feb-03 03:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.117 (still bad) 2011-Feb-03 03:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:03:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 03:03:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.970 1.112 1.081 0.975 2011-Feb-03 03:03:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 0.959 1.006 0.897 2011-Feb-03 03:03:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.011 0.917 0.954 1.107 2011-Feb-03 03:03:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 0.036 0.938 0.043 2011-Feb-03 03:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 03:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 03:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 03:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:04:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 03:04:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.969 1.107 1.080 0.974 2011-Feb-03 03:04:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 0.957 1.008 0.899 2011-Feb-03 03:04:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.014 0.917 0.956 1.108 2011-Feb-03 03:04:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.102 0.036 0.939 0.043 2011-Feb-03 03:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.107 (still bad) 2011-Feb-03 03:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 03:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.107 (still bad) 2011-Feb-03 03:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.118 (still bad) 2011-Feb-03 03:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:05:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 03:05:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.968 1.109 1.084 0.979 2011-Feb-03 03:05:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.069 0.956 0.998 0.891 2011-Feb-03 03:05:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.015 0.919 0.956 1.109 2011-Feb-03 03:05:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.103 0.036 0.941 0.043 2011-Feb-03 03:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.118 (still bad) 2011-Feb-03 03:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.117 (still bad) 2011-Feb-03 03:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.116 (still bad) 2011-Feb-03 03:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.106 (still bad) 2011-Feb-03 03:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.110 (still bad) 2011-Feb-03 03:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.107 (still bad) 2011-Feb-03 03:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.111 (still bad) 2011-Feb-03 03:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:06:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.037 < 0.75)! 2011-Feb-03 03:06:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.970 1.109 1.087 0.980 2011-Feb-03 03:06:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 0.959 1.001 0.892 2011-Feb-03 03:06:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.017 0.919 0.960 1.113 2011-Feb-03 03:06:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 0.037 0.945 0.044 2011-Feb-03 03:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.115 (still bad) 2011-Feb-03 03:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.114 (still bad) 2011-Feb-03 03:07:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 03:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.111 (still bad) 2011-Feb-03 03:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:07:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 03:07:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.969 1.109 1.082 0.978 2011-Feb-03 03:07:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 0.958 1.000 0.891 2011-Feb-03 03:07:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.019 0.922 0.961 1.115 2011-Feb-03 03:07:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.102 0.036 0.940 0.043 2011-Feb-03 03:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 03:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 03:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 03:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.130 (still bad) 2011-Feb-03 03:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 03:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.128 (still bad) 2011-Feb-03 03:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 03:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.119 (still bad) 2011-Feb-03 03:08:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 03:08:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.975 1.115 1.086 0.980 2011-Feb-03 03:08:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.067 0.958 0.998 0.889 2011-Feb-03 03:08:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.014 0.918 0.959 1.114 2011-Feb-03 03:08:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 0.036 0.940 0.043 2011-Feb-03 03:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 03:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 03:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.129 (still bad) 2011-Feb-03 03:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.140 (still bad) 2011-Feb-03 03:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.131 (still bad) 2011-Feb-03 03:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 03:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 03:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.121 (still bad) 2011-Feb-03 03:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.118 (still bad) 2011-Feb-03 03:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.119 (still bad) 2011-Feb-03 03:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.119 (still bad) 2011-Feb-03 03:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:09:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 03:09:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.974 1.114 1.085 0.976 2011-Feb-03 03:09:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.070 0.958 0.999 0.890 2011-Feb-03 03:09:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.020 0.921 0.955 1.110 2011-Feb-03 03:09:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.102 0.036 0.941 0.043 2011-Feb-03 03:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 03:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 03:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.125 (still bad) 2011-Feb-03 03:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.120 (still bad) 2011-Feb-03 03:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 03:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:10:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 03:10:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.974 1.115 1.087 0.978 2011-Feb-03 03:10:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.072 0.960 1.000 0.889 2011-Feb-03 03:10:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.015 0.917 0.957 1.109 2011-Feb-03 03:10:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.103 0.036 0.941 0.043 2011-Feb-03 03:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 03:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:11:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 03:11:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.973 1.114 1.091 0.984 2011-Feb-03 03:11:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.071 0.956 1.001 0.891 2011-Feb-03 03:11:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.015 0.918 0.956 1.111 2011-Feb-03 03:11:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 0.036 0.942 0.043 2011-Feb-03 03:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 03:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.121 (still bad) 2011-Feb-03 03:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.127 (still bad) 2011-Feb-03 03:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 03:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.126 (still bad) 2011-Feb-03 03:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 03:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 03:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.126 (still bad) 2011-Feb-03 03:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 03:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:12:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 03:12:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.977 1.118 1.088 0.981 2011-Feb-03 03:12:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 0.959 1.000 0.893 2011-Feb-03 03:12:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.016 0.918 0.962 1.118 2011-Feb-03 03:12:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.105 0.036 0.943 0.043 2011-Feb-03 03:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.125 (still bad) 2011-Feb-03 03:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 03:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 03:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 03:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 03:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 03:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.131 (still bad) 2011-Feb-03 03:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 03:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 03:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 03:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 03:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 03:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.127 (still bad) 2011-Feb-03 03:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 03:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.122 (still bad) 2011-Feb-03 03:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 03:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 03:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 03:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:13:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 03:13:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.975 1.116 1.087 0.979 2011-Feb-03 03:13:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.073 0.959 1.000 0.890 2011-Feb-03 03:13:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.016 0.917 0.955 1.106 2011-Feb-03 03:13:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 0.036 0.945 0.043 2011-Feb-03 03:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.123 (still bad) 2011-Feb-03 03:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 03:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 03:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 03:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 03:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.124 (still bad) 2011-Feb-03 03:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 03:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.125 (still bad) 2011-Feb-03 03:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 03:14:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 03:14:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.974 1.117 1.089 0.981 2011-Feb-03 03:14:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.069 0.960 1.002 0.893 2011-Feb-03 03:14:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.016 0.920 0.957 1.108 2011-Feb-03 03:14:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 0.036 0.942 0.043 2011-Feb-03 03:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 03:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.124 (still bad) 2011-Feb-03 03:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 03:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 03:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 03:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.125 (still bad) 2011-Feb-03 03:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 03:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 03:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.125 (still bad) 2011-Feb-03 03:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 03:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 03:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 03:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:15:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 03:15:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.975 1.115 1.086 0.979 2011-Feb-03 03:15:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.073 0.961 1.000 0.890 2011-Feb-03 03:15:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.017 0.920 0.955 1.107 2011-Feb-03 03:15:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.106 0.036 0.942 0.043 2011-Feb-03 03:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 03:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.118 (still bad) 2011-Feb-03 03:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.123 (still bad) 2011-Feb-03 03:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 03:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 03:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.122 (still bad) 2011-Feb-03 03:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.116 (still bad) 2011-Feb-03 03:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:16:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 03:16:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.978 1.119 1.096 0.987 2011-Feb-03 03:16:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 0.968 1.007 0.897 2011-Feb-03 03:16:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.025 0.927 0.964 1.118 2011-Feb-03 03:16:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.106 0.036 0.943 0.043 2011-Feb-03 03:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.119 (still bad) 2011-Feb-03 03:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.111 (still bad) 2011-Feb-03 03:17:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 03:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:17:16 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Feb-03 03:17:16 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Feb-03 03:17:16 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Feb-03 03:17:16 LOG5 end_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2011-Feb-03 03:17:16 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Feb-03 03:17:16 LOG5 end_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2011-Feb-03 03:17:16 STOP finish_task: Finishing task 'fixed azimuth drift map' 2011-Feb-03 03:17:16 LOG5 finish_task: Level: (2) ID = <10274> Status = 0 0 0 0 ok 2011-Feb-03 03:17:16 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2011-Feb-03 03:17:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2011-Feb-03 03:17:16 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2011-Feb-03 03:17:16 LOG5 end_task: Level: (2) ID = <10274> Status = 0 0 0 0 ok 2011-Feb-03 03:17:16 COMMAND run_command_line: EXECUTING command 72: 'ENDIF' 2011-Feb-03 03:17:16 COMMAND run_command_line: EXECUTING command 75: 'IF LSTSLEW(AGESVC1A_p3_038) < 114535 THEN' 2011-Feb-03 03:17:16 LOG3 is_if_valid: Current source data: up 326.9 12.2 UP - - 96 1.2 2011-Feb-03 03:17:16 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1A_p3_038) < 114535 2011-Feb-03 03:17:16 INFO5 is_if_valid: Condition parsed as: 11.732220999999999 < 11.759722222222223 2011-Feb-03 03:17:16 COMMAND run_command_line: EXECUTING command 76: 'FIXEDDRIFT az=329.80 alfaangle=44.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p3_038 ra=120900.00 dec=80430.00' 2011-Feb-03 03:17:16 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2011-Feb-03 03:17:17 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2011-Feb-03 03:17:17 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 329.80 44.3 hcorcal 5 tracking no off lcorcal first 1 AGESVC1A_p3_038 120900.00 80430.00 J 8500.0 Heliocentric velocity(optical)' 2011-Feb-03 03:17:17 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2011-Feb-03 03:17:17 LOG5 begin_task: Level: (2) ID = <10317> Status = 0 0 0 0 ok 2011-Feb-03 03:17:17 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGESVC1A_p3_020' 2011-Feb-03 03:17:17 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2011-Feb-03 03:17:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p3_038} 2011-Feb-03 03:17:17 INFO3 fixed_driftmap: Sending telescope to Az = 329.80 and ZA = 11.88 2011-Feb-03 03:17:17 LOG3 track_source: Calling 'track_source AGESVC1A_p3_038 329.80 11.8760021832 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Feb-03 03:17:17 START begin_task: Starting task 'sending tracking commands' 2011-Feb-03 03:17:17 LOG5 begin_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2011-Feb-03 03:17:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p3_038} INFO {Slewing to source 'AGESVC1A_p3_038' ...} 2011-Feb-03 03:17:17 INFO1 track_source: Starting to track AGESVC1A_p3_038 2011-Feb-03 03:17:17 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p3_038" 2011-Feb-03 03:17:17 LOG3 vw_send: To DATATAKING: set ra 329.80 2011-Feb-03 03:17:17 LOG3 vw_send: To DATATAKING: set dec 11.8760021832 2011-Feb-03 03:17:17 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Feb-03 03:17:17 LOG3 vw_send: To DATATAKING: pnt tr 329.80 11.8760021832 -CF 2011-Feb-03 03:17:17 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 03:17:17 STOP finish_task: Finishing task 'sending tracking commands' 2011-Feb-03 03:17:17 LOG5 finish_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2011-Feb-03 03:17:17 INFO2 finish_task: DONE finished sending: tracking commands 2011-Feb-03 03:17:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 03:17:17 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Feb-03 03:17:17 LOG5 end_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2011-Feb-03 03:17:17 START begin_task: Starting task 'rotate ALFA to +44.3 degrees' 2011-Feb-03 03:17:17 LOG5 begin_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2011-Feb-03 03:17:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +44.3 degrees ...} 2011-Feb-03 03:17:17 INFO2 rotate_alfa: ALFA commanded to +44.3 degrees 2011-Feb-03 03:17:17 LOG3 sock_errsend: To ALFAMOTOR: POSITION 44.3 REPLY 2011-Feb-03 03:17:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2011-Feb-03 03:17:17 START begin_task: Starting task 'waiting on ALFA rotation' 2011-Feb-03 03:17:17 LOG5 begin_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2011-Feb-03 03:17:17 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p3_038" 2011-Feb-03 03:17:17 LOG4 got_cormsg: From DATATAKING: set ra 329.80 2011-Feb-03 03:17:17 LOG4 got_cormsg: From DATATAKING: set dec 11.8760021832 2011-Feb-03 03:17:17 LOG4 got_cormsg: From DATATAKING: vw% 329.80 2011-Feb-03 03:17:17 LOG4 got_cormsg: From DATATAKING: vw% 11.8760021832 2011-Feb-03 03:17:17 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 03:17:17 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Feb-03 03:17:17 LOG4 got_cormsg: From DATATAKING: pnt tr 329.80 11.8760021832 -CF 2011-Feb-03 03:17:17 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 03:17:17 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Feb-03 03:17:17 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 03:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:17:29 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2011-Feb-03 03:17:29 INFO3 alfa_motor: ALFA rotator in-position +44.30 degrees 2011-Feb-03 03:17:29 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2011-Feb-03 03:17:29 LOG5 end_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2011-Feb-03 03:17:29 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Feb-03 03:17:29 STOP finish_task: Finishing task 'rotate ALFA to +44.3 degrees' 2011-Feb-03 03:17:29 LOG5 finish_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2011-Feb-03 03:17:29 INFO2 finish_task: DONE finished configuration: rotating ALFA to +44.3 degrees 2011-Feb-03 03:17:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 03:17:29 STOP end_task: Finishing task 'rotate ALFA to +44.3 degrees' with status 'OK' 2011-Feb-03 03:17:29 LOG5 end_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2011-Feb-03 03:17:29 START begin_task: Starting task 'waiting on telescope' 2011-Feb-03 03:17:29 LOG5 begin_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2011-Feb-03 03:17:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Feb-03 03:17:29 LOG3 waittrk: Start waittrk 5 2011-Feb-03 03:17:29 START begin_task: Starting task 'waiting on telescope movement' 2011-Feb-03 03:17:29 LOG5 begin_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2011-Feb-03 03:17:34 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Feb-03 03:17:34 LOG5 end_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2011-Feb-03 03:17:34 START begin_task: Starting task 'waiting on telescope on source' 2011-Feb-03 03:17:34 LOG5 begin_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2011-Feb-03 03:18:45 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Feb-03 03:18:45 LOG5 end_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2011-Feb-03 03:18:45 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Feb-03 03:18:45 INFO2 waittrk: Now tracking AGESVC1A_p3_038 2011-Feb-03 03:18:45 LOG4 waittrk: Current telescope position: Az = 329.45 ZA = 11.86 2011-Feb-03 03:18:45 STOP finish_task: Finishing task 'waiting on telescope' 2011-Feb-03 03:18:45 LOG5 finish_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2011-Feb-03 03:18:45 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Feb-03 03:18:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 03:18:45 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Feb-03 03:18:45 LOG5 end_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2011-Feb-03 03:18:45 START begin_task: Starting task 'selecting calibration type' 2011-Feb-03 03:18:45 LOG5 begin_task: Level: (3) ID = <10324> Status = 0 0 0 0 ok 2011-Feb-03 03:18:45 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Feb-03 03:18:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Feb-03 03:18:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 03:18:45 START begin_task: Starting task 'waiting on setcal' 2011-Feb-03 03:18:45 LOG5 begin_task: Level: (4) ID = <10325> Status = 0 0 0 0 ok 2011-Feb-03 03:18:45 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Feb-03 03:18:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 03:18:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 03:18:46 LOG4 got_cormsg: From DATATAKING: DONE 2011-Feb-03 03:18:46 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Feb-03 03:18:46 LOG5 end_task: Level: (4) ID = <10325> Status = 0 0 0 0 ok 2011-Feb-03 03:18:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Feb-03 03:18:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Feb-03 03:18:46 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Feb-03 03:18:46 START begin_task: Starting task 'waiting on command to ALFA' 2011-Feb-03 03:18:46 LOG5 begin_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2011-Feb-03 03:18:46 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 03:18:46 LOG4 got_alfamon: From ALFAMON: ACK 2011-Feb-03 03:18:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Feb-03 03:18:46 LOG5 end_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2011-Feb-03 03:18:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Feb-03 03:18:47 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Feb-03 03:18:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Feb-03 03:18:47 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Feb-03 03:18:47 START begin_task: Starting task 'waiting on command to ALFA' 2011-Feb-03 03:18:47 LOG5 begin_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2011-Feb-03 03:18:47 LOG4 got_alfamon: From ALFAMON: ACK 2011-Feb-03 03:18:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Feb-03 03:18:47 LOG5 end_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2011-Feb-03 03:18:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Feb-03 03:18:47 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Feb-03 03:18:47 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Feb-03 03:18:47 LOG5 end_task: Level: (3) ID = <10324> Status = 0 0 0 0 ok 2011-Feb-03 03:18:47 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2011-Feb-03 03:18:47 INFO2 astwait: Waiting for 19 seconds from 07:18:47 to 07:19:06 UTC ... 2011-Feb-03 03:18:47 LOG4 send_obs_status: To obs_status: <1> TASKTIME 19 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Feb-03 03:18:47 START begin_task: Starting task 'waiting on waiting for AST time' 2011-Feb-03 03:18:47 LOG5 begin_task: Level: (3) ID = <10328> Status = 0 0 0 0 ok 2011-Feb-03 03:19:06 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2011-Feb-03 03:19:06 LOG5 end_task: Level: (3) ID = <10328> Status = 0 0 0 0 ok 2011-Feb-03 03:19:06 INFO3 astwait: Finished waiting 2011-Feb-03 03:19:06 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Feb-03 03:19:06 LOG5 dopset_later: Calling 'dopset_later 61.439520442535056' 2011-Feb-03 03:19:06 INFO3 dopset_later: Setting Doppler correction for 03:20:06 (61.4 seconds from now) 2011-Feb-03 03:19:06 LOG5 antvel: Calling 'antvel 329.800000 11.876002 F Heliocentric 61.439520442535056' 2011-Feb-03 03:19:06 LOG2 antvel: Transforming current Az = 329.80 ZA = 11.88 to apparent RA = 12:09:35.9 Dec = +08:00:32.5 2011-Feb-03 03:19:06 LOG2 antvel: Parameters to Doppler: Heliocentric 26406 2011 34 0.0 2011-Feb-03 03:19:06 INFO5 antvel: Computed antenna velocity: -21.33382 km/s 2011-Feb-03 03:19:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-21.333815411900002 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2011-Feb-03 03:19:06 INFO4 dopset_gen: New sky frequencies: 1381.341728 1381.341728 1381.341728 1381.341728 1381.341728 1381.341728 1381.341728 1381.341728 1381.341728 2011-Feb-03 03:19:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.341728 sky0=1381.341728 sky1=1381.341728 sky2=1381.341728 sky3=1381.341728 sky4=1381.341728 sky5=1381.341728 sky6=1381.341728 sky7=1381.341728 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2011-Feb-03 03:19:06 LOG2 dopset_gen: Result from 'sky2syn': 1631.341728 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2011-Feb-03 03:19:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631341728.0} 2011-Feb-03 03:19:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 03:19:06 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2011-Feb-03 03:19:06 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2011-Feb-03 03:19:06 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.4 Dec = +08:04:14.6 2011-Feb-03 03:19:06 LOG3 track_source: Calling 'track_source AGESVC1A_p3_038 120803.4 080414.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Feb-03 03:19:06 START begin_task: Starting task 'sending tracking commands' 2011-Feb-03 03:19:06 LOG5 begin_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2011-Feb-03 03:19:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p3_038} INFO {Slewing to source 'AGESVC1A_p3_038' ...} 2011-Feb-03 03:19:06 INFO1 track_source: Starting to track AGESVC1A_p3_038 2011-Feb-03 03:19:06 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p3_038" 2011-Feb-03 03:19:06 LOG3 vw_send: To DATATAKING: set ra 120803.4 2011-Feb-03 03:19:06 LOG3 vw_send: To DATATAKING: set dec 080414.6 2011-Feb-03 03:19:06 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Feb-03 03:19:06 LOG3 vw_send: To DATATAKING: pnt tr 120803.4 080414.6 -CJ 2011-Feb-03 03:19:06 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 03:19:06 STOP finish_task: Finishing task 'sending tracking commands' 2011-Feb-03 03:19:06 LOG5 finish_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2011-Feb-03 03:19:06 INFO2 finish_task: DONE finished sending: tracking commands 2011-Feb-03 03:19:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 03:19:06 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Feb-03 03:19:06 LOG5 end_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2011-Feb-03 03:19:06 START begin_task: Starting task 'waiting on telescope' 2011-Feb-03 03:19:06 LOG5 begin_task: Level: (3) ID = <10330> Status = 0 0 0 0 ok 2011-Feb-03 03:19:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2011-Feb-03 03:19:06 LOG3 waittrk: Start waittrk 5 2011-Feb-03 03:19:06 START begin_task: Starting task 'waiting on telescope movement' 2011-Feb-03 03:19:06 LOG5 begin_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2011-Feb-03 03:19:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631341728.0} 2011-Feb-03 03:19:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2011-Feb-03 03:19:06 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 03:19:06 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p3_038" 2011-Feb-03 03:19:06 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 03:19:06 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 03:19:06 LOG4 got_cormsg: From DATATAKING: set ra 120803.4 2011-Feb-03 03:19:06 LOG4 got_cormsg: From DATATAKING: set dec 080414.6 2011-Feb-03 03:19:06 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Feb-03 03:19:06 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.4 080414.6 -CJ 2011-Feb-03 03:19:06 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 03:19:06 LOG4 got_cormsg: From DATATAKING: 120803.4 2011-Feb-03 03:19:06 LOG4 got_cormsg: From DATATAKING: vw% 080414.6 2011-Feb-03 03:19:06 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2011-Feb-03 03:19:11 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2011-Feb-03 03:19:11 LOG5 end_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2011-Feb-03 03:19:11 START begin_task: Starting task 'waiting on telescope on source' 2011-Feb-03 03:19:11 LOG5 begin_task: Level: (4) ID = <10332> Status = 0 0 0 0 ok 2011-Feb-03 03:19:13 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2011-Feb-03 03:19:13 LOG5 end_task: Level: (4) ID = <10332> Status = 0 0 0 0 ok 2011-Feb-03 03:19:13 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2011-Feb-03 03:19:13 INFO2 waittrk: Now tracking AGESVC1A_p3_038 2011-Feb-03 03:19:13 LOG4 waittrk: Current telescope position: Az = 329.53 ZA = 11.85 2011-Feb-03 03:19:13 STOP finish_task: Finishing task 'waiting on telescope' 2011-Feb-03 03:19:13 LOG5 finish_task: Level: (3) ID = <10330> Status = 0 0 0 0 ok 2011-Feb-03 03:19:13 INFO2 finish_task: DONE finished waiting: telescope on source 2011-Feb-03 03:19:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 03:19:13 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2011-Feb-03 03:19:13 LOG5 end_task: Level: (3) ID = <10330> Status = 0 0 0 0 ok 2011-Feb-03 03:19:13 START begin_task: Starting task 'adjusting WAPP+Mock power' 2011-Feb-03 03:19:13 LOG5 begin_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2011-Feb-03 03:19:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2011-Feb-03 03:19:13 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2011-Feb-03 03:19:13 LOG3 vw_send: To DATATAKING: adjpwrif2 2011-Feb-03 03:19:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2011-Feb-03 03:19:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 03:19:13 START begin_task: Starting task 'waiting on adjpwrif2' 2011-Feb-03 03:19:13 LOG5 begin_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2011-Feb-03 03:19:13 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2011-Feb-03 03:19:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 03:19:16 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 03:19:16 LOG4 got_cormsg: From DATATAKING: DONE 2011-Feb-03 03:19:16 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2011-Feb-03 03:19:16 LOG5 end_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2011-Feb-03 03:19:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2011-Feb-03 03:19:16 START begin_task: Starting task 'adjusting WAPP power' 2011-Feb-03 03:19:16 LOG5 begin_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2011-Feb-03 03:19:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Feb-03 03:19:16 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2011-Feb-03 03:19:16 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2011-Feb-03 03:19:16 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2011-Feb-03 03:19:16 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2011-Feb-03 03:19:16 START begin_task: Starting task 'waiting on adjust WAPP power' 2011-Feb-03 03:19:16 LOG5 begin_task: Level: (5) ID = <10336> Status = 0 0 0 0 ok 2011-Feb-03 03:19:17 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 03:19:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2011-Feb-03 03:19:17 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 7 dB 2011-Feb-03 03:19:17 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 3 3 dB 2011-Feb-03 03:19:17 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 5 dB --- beam 3: 4 3 dB 2011-Feb-03 03:19:17 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 4 0 dB 2011-Feb-03 03:19:17 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2011-Feb-03 03:19:17 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2011-Feb-03 03:19:17 LOG5 end_task: Level: (5) ID = <10336> Status = 0 0 0 0 ok 2011-Feb-03 03:19:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.948 1.089 ALFA beam 1: 1.087 0.981 2011-Feb-03 03:19:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.025 0.934 ALFA beam 3: 0.956 1.074 2011-Feb-03 03:19:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.972 0.898 ALFA beam 5: 0.915 1.066 2011-Feb-03 03:19:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.105 0.036 ALFA beam 7: 0.943 0.043 2011-Feb-03 03:19:17 STOP finish_task: Finishing task 'adjusting WAPP power' 2011-Feb-03 03:19:17 LOG5 finish_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2011-Feb-03 03:19:17 INFO3 finish_task: DONE finished adjusting: WAPP power 2011-Feb-03 03:19:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 03:19:17 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2011-Feb-03 03:19:17 LOG5 end_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2011-Feb-03 03:19:17 START begin_task: Starting task 'adjusting Mock spectrometer power' 2011-Feb-03 03:19:17 LOG5 begin_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2011-Feb-03 03:19:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2011-Feb-03 03:19:17 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2011-Feb-03 03:19:17 LOG3 socket_wait: To MOCK: ADJP30 2011-Feb-03 03:19:17 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2011-Feb-03 03:19:17 LOG5 begin_task: Level: (5) ID = <10338> Status = 0 0 0 0 ok 2011-Feb-03 03:19:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 03:19:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 1.089 1.087 0.981 2011-Feb-03 03:19:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.025 0.934 0.956 1.074 2011-Feb-03 03:19:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.972 0.898 0.915 1.066 2011-Feb-03 03:19:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.105 0.036 0.943 0.043 2011-Feb-03 03:19:23 INFO3 from_mock: From MOCK: b0s0g0 rms:A 32.6 28.7 B 30.6 30.6 mn:A -0.1 -0.1 B 0.6 0.5 gn: 10 10 2011-Feb-03 03:19:23 INFO3 from_mock: From MOCK: b0s1g0 rms:A 36.0 34.4 B 31.6 33.4 mn:A 0.3 -0.2 B 0.3 0.1 gn: 9 7 2011-Feb-03 03:19:23 INFO3 from_mock: From MOCK: b1s0g0 rms:A 32.1 30.2 B 31.4 28.2 mn:A -0.3 -0.2 B 0.3 -0.0 gn: 9 9 2011-Feb-03 03:19:23 INFO3 from_mock: From MOCK: b1s1g0 rms:A 31.7 29.2 B 33.4 33.4 mn:A -0.0 -0.4 B 0.5 -0.0 gn: 6 6 2011-Feb-03 03:19:23 INFO3 from_mock: From MOCK: b2s0g0 rms:A 30.5 29.6 B 31.1 32.5 mn:A -0.2 -0.4 B 0.2 -0.2 gn: 10 11 2011-Feb-03 03:19:23 INFO3 from_mock: From MOCK: b2s1g0 rms:A 34.3 34.5 B 32.3 30.0 mn:A 0.2 -0.2 B -0.1 0.1 gn: 10 9 2011-Feb-03 03:19:23 INFO3 from_mock: From MOCK: b3s0g0 rms:A 30.9 30.7 B 30.5 27.2 mn:A 0.5 -0.0 B 0.2 -0.2 gn: 11 11 2011-Feb-03 03:19:23 INFO3 from_mock: From MOCK: b3s1g0 rms:A 35.2 34.3 B 36.3 37.8 mn:A 0.3 0.8 B 0.6 -0.2 gn: 10 9 2011-Feb-03 03:19:23 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.9 29.9 B 30.4 30.6 mn:A -0.2 -0.1 B 0.1 -0.4 gn: 10 14 2011-Feb-03 03:19:23 INFO3 from_mock: From MOCK: b4s1g0 rms:A 39.2 35.6 B 34.5 33.2 mn:A 0.1 -0.2 B -0.1 -0.7 gn: 10 14 2011-Feb-03 03:19:24 INFO3 from_mock: From MOCK: b5s0g0 rms:A 28.9 28.4 B 30.9 30.8 mn:A 0.2 0.0 B 0.3 0.4 gn: 12 12 2011-Feb-03 03:19:24 INFO3 from_mock: From MOCK: b5s1g0 rms:A 36.1 35.2 B 33.1 33.1 mn:A -0.1 -0.1 B -0.1 0.1 gn: 10 6 2011-Feb-03 03:19:24 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.4 29.8 B 29.2 30.1 mn:A 0.1 -0.9 B 0.3 -0.5 gn: 12 29 2011-Feb-03 03:19:24 INFO3 from_mock: From MOCK: b6s1g0 rms:A 32.1 29.4 B 29.9 29.0 mn:A -0.3 0.7 B -0.2 -0.1 gn: 11 31 2011-Feb-03 03:19:24 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2011-Feb-03 03:19:24 LOG5 end_task: Level: (5) ID = <10338> Status = 0 0 0 0 ok 2011-Feb-03 03:19:24 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2011-Feb-03 03:19:24 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2011-Feb-03 03:19:24 LOG5 finish_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2011-Feb-03 03:19:24 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2011-Feb-03 03:19:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 03:19:24 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2011-Feb-03 03:19:24 LOG5 end_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2011-Feb-03 03:19:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Feb-03 03:19:24 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2011-Feb-03 03:19:24 LOG5 finish_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2011-Feb-03 03:19:24 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2011-Feb-03 03:19:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 03:19:24 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2011-Feb-03 03:19:24 LOG5 end_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2011-Feb-03 03:19:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel Cabrera 2011-Feb-03 03:19:24 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel Cabrera 2011-Feb-03 03:19:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel Cabrera 2011-Feb-03 03:19:24 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel Cabrera 2011-Feb-03 03:19:24 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2011-Feb-03 03:19:24 START begin_task: Starting task 'WAPP+Mock calibration' 2011-Feb-03 03:19:24 LOG5 begin_task: Level: (3) ID = <10339> Status = 0 0 0 0 ok 2011-Feb-03 03:19:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2011-Feb-03 03:19:24 START begin_task: Starting task 'selecting calibration type' 2011-Feb-03 03:19:24 LOG5 begin_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2011-Feb-03 03:19:24 LOG3 vw_send: To DATATAKING: setcal hcorcal 2011-Feb-03 03:19:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2011-Feb-03 03:19:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 03:19:24 START begin_task: Starting task 'waiting on setcal' 2011-Feb-03 03:19:24 LOG5 begin_task: Level: (5) ID = <10341> Status = 0 0 0 0 ok 2011-Feb-03 03:19:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2011-Feb-03 03:19:24 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2011-Feb-03 03:19:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2011-Feb-03 03:19:24 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 03:19:24 LOG4 got_cormsg: From DATATAKING: DONE 2011-Feb-03 03:19:24 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2011-Feb-03 03:19:24 LOG5 end_task: Level: (5) ID = <10341> Status = 0 0 0 0 ok 2011-Feb-03 03:19:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2011-Feb-03 03:19:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Feb-03 03:19:24 LOG3 socket_wait: To ALFAMON: CAL HI 2011-Feb-03 03:19:24 START begin_task: Starting task 'waiting on command to ALFA' 2011-Feb-03 03:19:24 LOG5 begin_task: Level: (5) ID = <10342> Status = 0 0 0 0 ok 2011-Feb-03 03:19:24 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 03:19:25 NOTE WAPPDATA-new_file: New FITS file: wapp.20110203.a2048.0006.fits 2011-Feb-03 03:19:25 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20110203.a2048.0006.fits} 2011-Feb-03 03:19:25 LOG4 got_alfamon: From ALFAMON: ACK 2011-Feb-03 03:19:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Feb-03 03:19:25 LOG5 end_task: Level: (5) ID = <10342> Status = 0 0 0 0 ok 2011-Feb-03 03:19:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Feb-03 03:19:25 LOG3 to_alfamon: To ALFAMON: CAL HI 2011-Feb-03 03:19:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2011-Feb-03 03:19:25 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2011-Feb-03 03:19:25 START begin_task: Starting task 'waiting on command to ALFA' 2011-Feb-03 03:19:25 LOG5 begin_task: Level: (5) ID = <10343> Status = 0 0 0 0 ok 2011-Feb-03 03:19:26 LOG4 got_alfamon: From ALFAMON: ACK 2011-Feb-03 03:19:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2011-Feb-03 03:19:26 LOG5 end_task: Level: (5) ID = <10343> Status = 0 0 0 0 ok 2011-Feb-03 03:19:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2011-Feb-03 03:19:26 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2011-Feb-03 03:19:26 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2011-Feb-03 03:19:26 LOG5 end_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2011-Feb-03 03:19:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2011-Feb-03 03:19:26 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2011-Feb-03 03:19:26 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2011-Feb-03 03:19:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Feb-03 03:19:26 LOG5 begin_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2011-Feb-03 03:19:26 LOG3 CALCONTROL-caltrig: Software trigger 2011-Feb-03 03:19:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2011-Feb-03 03:19:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Feb-03 03:19:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Feb-03 03:19:26 LOG5 end_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2011-Feb-03 03:19:26 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2011-Feb-03 03:19:26 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Feb-03 03:19:26 LOG5 begin_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2011-Feb-03 03:19:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2011-Feb-03 03:19:26 LOG5 log_alfabeam: Parameters: 12.134277777777775 8.0707222222222228 11.748431 2011.0934660747332 44.299896 2011-Feb-03 03:19:26 LOG4 log_alfabeam: ALFABEAM 0 12.134277777777777 8.070722222222221 2011-Feb-03 03:19:26 LOG4 log_alfabeam: ALFABEAM 1 12.132275532650370 8.172236934220383 2011-Feb-03 03:19:26 LOG4 log_alfabeam: ALFABEAM 2 12.128029406498110 8.105253980898011 2011-Feb-03 03:19:26 LOG4 log_alfabeam: ALFABEAM 3 12.129979052922002 8.003503129209243 2011-Feb-03 03:19:26 LOG4 log_alfabeam: ALFABEAM 4 12.136254677587496 7.969057020860740 2011-Feb-03 03:19:26 LOG4 log_alfabeam: ALFABEAM 5 12.140561621143243 8.036869577643486 2011-Feb-03 03:19:26 LOG4 log_alfabeam: ALFABEAM 6 12.138532184288442 8.138295530650426 2011-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: object=AGESVC1A_p3_038 2011-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: scantype=ON 2011-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: patternid=103400052 2011-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: scanid=103400053 2011-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456341728.0 2011-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306341728.0 2011-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Feb-03 03:19:26 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Feb-03 03:19:26 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGESVC1A_p3_038:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=103400052:scanid=103400053:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456341728.0:topobfreqhz=1306341728.0:filetype=1 2011-Feb-03 03:19:26 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Feb-03 03:19:26 LOG5 begin_task: Level: (5) ID = <10346> Status = 0 0 0 0 ok 2011-Feb-03 03:19:26 LOG4 from_mock: From MOCK: psetok 2011-Feb-03 03:19:26 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Feb-03 03:19:26 LOG5 end_task: Level: (5) ID = <10346> Status = 0 0 0 0 ok 2011-Feb-03 03:19:26 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Feb-03 03:19:26 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Feb-03 03:19:26 LOG3 socket_wait: To MOCK: STAR5 2011-Feb-03 03:19:26 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Feb-03 03:19:26 LOG5 begin_task: Level: (5) ID = <10347> Status = 0 0 0 0 ok 2011-Feb-03 03:19:26 LOG4 from_mock: From MOCK: starok 2011-Feb-03 03:19:26 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Feb-03 03:19:26 LOG5 end_task: Level: (5) ID = <10347> Status = 0 0 0 0 ok 2011-Feb-03 03:19:26 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Feb-03 03:19:26 INFO2 take_data: Starting WAPP+Mock 5-second scan: 103400053 2011-Feb-03 03:19:26 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Feb-03 03:19:26 LOG5 begin_task: Level: (5) ID = <10348> Status = 0 0 0 0 ok 2011-Feb-03 03:19:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 03:19:26 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Feb-03 03:19:26 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Feb-03 03:19:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2011-Feb-03 03:19:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26367.00 2011-Feb-03 03:19:28 INFO2 got_mock_message: Mock spectrometer start file number is 01500 2011-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Feb-03 03:19:28 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Feb-03 03:19:28 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2011-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2011-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2011-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2011-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2011-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2011-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2011-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2011-Feb-03 03:19:31 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:19:31.02 2011-Feb-03 03:19:31 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1296717571.02 Thu Feb 3 03:19:31 2011 2011-Feb-03 03:19:31 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Feb-03 03:19:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.341728 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 03:19:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.341728 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 03:19:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.341728 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 03:19:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.341728 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 03:19:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.341728 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 03:19:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.341728 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 03:19:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.341728 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 03:19:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.341728 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 03:19:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.341728 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 03:19:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 03:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.516 (still bad) 2011-Feb-03 03:19:36 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Feb-03 03:19:37 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Feb-03 03:19:37 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Feb-03 03:19:37 LOG5 end_task: Level: (5) ID = <10348> Status = 0 0 0 0 ok 2011-Feb-03 03:19:37 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Feb-03 03:19:37 LOG5 end_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2011-Feb-03 03:19:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2011-Feb-03 03:19:37 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2011-Feb-03 03:19:37 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2011-Feb-03 03:19:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2011-Feb-03 03:19:37 LOG5 begin_task: Level: (4) ID = <10349> Status = 0 0 0 0 ok 2011-Feb-03 03:19:37 LOG3 CALCONTROL-caltrig: Software trigger 2011-Feb-03 03:19:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2011-Feb-03 03:19:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2011-Feb-03 03:19:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2011-Feb-03 03:19:37 LOG5 end_task: Level: (4) ID = <10349> Status = 0 0 0 0 ok 2011-Feb-03 03:19:37 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2011-Feb-03 03:19:37 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Feb-03 03:19:37 LOG5 begin_task: Level: (4) ID = <10350> Status = 0 0 0 0 ok 2011-Feb-03 03:19:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2011-Feb-03 03:19:37 LOG5 log_alfabeam: Parameters: 12.134277777777775 8.0707222222222228 11.751495 2011.0934664233021 44.299896 2011-Feb-03 03:19:37 LOG4 log_alfabeam: ALFABEAM 0 12.134277777777765 8.070722222222226 2011-Feb-03 03:19:37 LOG4 log_alfabeam: ALFABEAM 1 12.132297550267278 8.172332083703552 2011-Feb-03 03:19:37 LOG4 log_alfabeam: ALFABEAM 2 12.128036964176998 8.105553469753692 2011-Feb-03 03:19:37 LOG4 log_alfabeam: ALFABEAM 3 12.129964449529918 8.003709540412425 2011-Feb-03 03:19:37 LOG4 log_alfabeam: ALFABEAM 4 12.136232592073242 7.968962807037644 2011-Feb-03 03:19:37 LOG4 log_alfabeam: ALFABEAM 5 12.140554276480875 8.036569706728521 2011-Feb-03 03:19:37 LOG4 log_alfabeam: ALFABEAM 6 12.138546781264900 8.138091929871468 2011-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: object=AGESVC1A_p3_038 2011-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2011-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: scantype=OFF 2011-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: patternid=103400052 2011-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: scanid=103400054 2011-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456341728.0 2011-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306341728.0 2011-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Feb-03 03:19:37 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Feb-03 03:19:37 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGESVC1A_p3_038:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=103400052:scanid=103400054:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456341728.0:topobfreqhz=1306341728.0:filetype=1 2011-Feb-03 03:19:37 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Feb-03 03:19:37 LOG5 begin_task: Level: (5) ID = <10351> Status = 0 0 0 0 ok 2011-Feb-03 03:19:37 LOG4 from_mock: From MOCK: psetok 2011-Feb-03 03:19:37 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Feb-03 03:19:37 LOG5 end_task: Level: (5) ID = <10351> Status = 0 0 0 0 ok 2011-Feb-03 03:19:37 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Feb-03 03:19:37 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Feb-03 03:19:37 LOG3 socket_wait: To MOCK: STAR5 2011-Feb-03 03:19:37 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Feb-03 03:19:37 LOG5 begin_task: Level: (5) ID = <10352> Status = 0 0 0 0 ok 2011-Feb-03 03:19:37 LOG4 from_mock: From MOCK: starok 2011-Feb-03 03:19:37 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Feb-03 03:19:37 LOG5 end_task: Level: (5) ID = <10352> Status = 0 0 0 0 ok 2011-Feb-03 03:19:37 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Feb-03 03:19:37 INFO2 take_data: Starting WAPP+Mock 5-second scan: 103400054 2011-Feb-03 03:19:37 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Feb-03 03:19:37 LOG5 begin_task: Level: (5) ID = <10353> Status = 0 0 0 0 ok 2011-Feb-03 03:19:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 03:19:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2011-Feb-03 03:19:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26378.00 2011-Feb-03 03:19:38 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Feb-03 03:19:38 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Feb-03 03:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.516 (still bad) 2011-Feb-03 03:19:40 INFO2 got_mock_message: Mock spectrometer start file number is 01600 2011-Feb-03 03:19:40 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Feb-03 03:19:40 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2011-Feb-03 03:19:40 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2011-Feb-03 03:19:40 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Feb-03 03:19:40 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Feb-03 03:19:40 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2011-Feb-03 03:19:40 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Feb-03 03:19:40 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Feb-03 03:19:40 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Feb-03 03:19:40 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Feb-03 03:19:40 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Feb-03 03:19:40 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Feb-03 03:19:40 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2011-Feb-03 03:19:40 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2011-Feb-03 03:19:40 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2011-Feb-03 03:19:40 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2011-Feb-03 03:19:40 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2011-Feb-03 03:19:40 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2011-Feb-03 03:19:40 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2011-Feb-03 03:19:42 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:19:43.00 2011-Feb-03 03:19:43 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1296717583.00 Thu Feb 3 03:19:43 2011 2011-Feb-03 03:19:43 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Feb-03 03:19:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.341728 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 03:19:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.341728 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 03:19:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.341728 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 03:19:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.341728 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 03:19:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.341728 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 03:19:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.341728 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 03:19:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.341728 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 03:19:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.341728 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 03:19:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.341728 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 03:19:43 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2011-Feb-03 03:19:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2011-Feb-03 03:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.105 (still bad) 2011-Feb-03 03:19:48 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2011-Feb-03 03:19:49 INFO1 got_mock_message: From MOCK: DONE with observation 2011-Feb-03 03:19:49 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2011-Feb-03 03:19:49 LOG5 end_task: Level: (5) ID = <10353> Status = 0 0 0 0 ok 2011-Feb-03 03:19:49 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2011-Feb-03 03:19:49 LOG5 end_task: Level: (4) ID = <10350> Status = 0 0 0 0 ok 2011-Feb-03 03:19:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2011-Feb-03 03:19:49 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2011-Feb-03 03:19:49 LOG5 finish_task: Level: (3) ID = <10339> Status = 0 0 0 0 ok 2011-Feb-03 03:19:49 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2011-Feb-03 03:19:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 03:19:49 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2011-Feb-03 03:19:49 LOG5 end_task: Level: (3) ID = <10339> Status = 0 0 0 0 ok 2011-Feb-03 03:19:49 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2011-Feb-03 03:19:49 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 329.80 and ZA = 11.88 2011-Feb-03 03:19:49 LOG3 track_source: Calling 'track_source AGESVC1A_p3_038 329.80 11.8760021832 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2011-Feb-03 03:19:49 START begin_task: Starting task 'sending tracking commands' 2011-Feb-03 03:19:49 LOG5 begin_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2011-Feb-03 03:19:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p3_038} INFO {Slewing to source 'AGESVC1A_p3_038' ...} 2011-Feb-03 03:19:49 INFO1 track_source: Starting to track AGESVC1A_p3_038 2011-Feb-03 03:19:49 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p3_038" 2011-Feb-03 03:19:49 LOG3 vw_send: To DATATAKING: set ra 329.80 2011-Feb-03 03:19:49 LOG3 vw_send: To DATATAKING: set dec 11.8760021832 2011-Feb-03 03:19:49 LOG3 vw_send: To DATATAKING: pnt tr send 2011-Feb-03 03:19:49 LOG3 vw_send: To DATATAKING: pnt tr 329.80 11.8760021832 -CF 2011-Feb-03 03:19:49 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 03:19:49 STOP finish_task: Finishing task 'sending tracking commands' 2011-Feb-03 03:19:49 LOG5 finish_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2011-Feb-03 03:19:49 INFO2 finish_task: DONE finished sending: tracking commands 2011-Feb-03 03:19:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2011-Feb-03 03:19:49 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2011-Feb-03 03:19:49 LOG5 end_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2011-Feb-03 03:19:49 LOG1 fixed_driftmap: Parameters: HA = -00:24:00.1 Start = 11:45:35.9 LST = 11:45:17.4 diff = 18.5 secs 2011-Feb-03 03:19:49 INFO2 fixed_driftmap: Waiting 16.5 seconds for RA 12:09:36 2011-Feb-03 03:19:49 INFO2 lstwait: Waiting for 16.4 secs from LST 11:45:17 to LST 11:45:34 ... 2011-Feb-03 03:19:49 LOG4 send_obs_status: To obs_status: <1> TASKTIME 16.44550844541509 BITMAP stat_wait MESSAGE {Waiting ...} 2011-Feb-03 03:19:49 START begin_task: Starting task 'waiting on wait on LST' 2011-Feb-03 03:19:49 LOG5 begin_task: Level: (3) ID = <10355> Status = 0 0 0 0 ok 2011-Feb-03 03:19:49 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p3_038" 2011-Feb-03 03:19:49 LOG4 got_cormsg: From DATATAKING: set ra 329.80 2011-Feb-03 03:19:49 LOG4 got_cormsg: From DATATAKING: set dec 11.8760021832 2011-Feb-03 03:19:49 LOG4 got_cormsg: From DATATAKING: vw% 329.80 2011-Feb-03 03:19:49 LOG4 got_cormsg: From DATATAKING: vw% 11.8760021832 2011-Feb-03 03:19:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 03:19:49 LOG4 got_cormsg: From DATATAKING: pnt tr send 2011-Feb-03 03:19:49 LOG4 got_cormsg: From DATATAKING: pnt tr 329.80 11.8760021832 -CF 2011-Feb-03 03:19:49 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2011-Feb-03 03:19:49 LOG4 got_cormsg: From DATATAKING: vw% vw% 2011-Feb-03 03:19:49 LOG4 got_cormsg: From DATATAKING: vw% 2011-Feb-03 03:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.105 (still bad) 2011-Feb-03 03:20:05 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2011-Feb-03 03:20:05 LOG5 end_task: Level: (3) ID = <10355> Status = 0 0 0 0 ok 2011-Feb-03 03:20:05 LOG4 lstwait: Finished waiting 0.56 seconds late 2011-Feb-03 03:20:05 INFO3 lstwait: Finished waiting 2011-Feb-03 03:20:06 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2011-Feb-03 03:20:06 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2011-Feb-03 03:20:06 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2011-Feb-03 03:20:06 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2011-Feb-03 03:20:06 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2011-Feb-03 03:20:06 START begin_task: Starting task 'WAPP+Mock spectral observation' 2011-Feb-03 03:20:06 LOG5 begin_task: Level: (3) ID = <10356> Status = 0 0 0 0 ok 2011-Feb-03 03:20:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2011-Feb-03 03:20:06 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2011-Feb-03 03:20:06 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2011-Feb-03 03:20:06 LOG3 take_mock_data: PSET configuration: projid=a2048 2011-Feb-03 03:20:06 LOG3 take_mock_data: PSET configuration: obsnm=Israel Cabrera 2011-Feb-03 03:20:06 LOG3 take_mock_data: PSET configuration: object=AGESVC1A_p3_038 2011-Feb-03 03:20:06 LOG3 take_mock_data: PSET configuration: frontend=alfa 2011-Feb-03 03:20:06 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2011-Feb-03 03:20:06 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2011-Feb-03 03:20:06 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2011-Feb-03 03:20:06 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2011-Feb-03 03:20:06 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2011-Feb-03 03:20:06 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2011-Feb-03 03:20:06 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2011-Feb-03 03:20:06 LOG3 take_mock_data: PSET configuration: patternid=103400055 2011-Feb-03 03:20:06 LOG3 take_mock_data: PSET configuration: scanid=103400055 2011-Feb-03 03:20:06 LOG3 take_mock_data: PSET configuration: prfeed=0 2011-Feb-03 03:20:06 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2011-Feb-03 03:20:06 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2011-Feb-03 03:20:06 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456341728.0 2011-Feb-03 03:20:06 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306341728.0 2011-Feb-03 03:20:06 LOG3 take_mock_data: PSET configuration: filetype=1 2011-Feb-03 03:20:06 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2011-Feb-03 03:20:06 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel Cabrera:object=AGESVC1A_p3_038:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=103400055:scanid=103400055:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456341728.0:topobfreqhz=1306341728.0:filetype=1 2011-Feb-03 03:20:06 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2011-Feb-03 03:20:06 LOG5 begin_task: Level: (4) ID = <10357> Status = 0 0 0 0 ok 2011-Feb-03 03:20:06 LOG4 from_mock: From MOCK: psetok 2011-Feb-03 03:20:06 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2011-Feb-03 03:20:06 LOG5 end_task: Level: (4) ID = <10357> Status = 0 0 0 0 ok 2011-Feb-03 03:20:06 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2011-Feb-03 03:20:06 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2011-Feb-03 03:20:06 LOG3 socket_wait: To MOCK: STAR1200 2011-Feb-03 03:20:06 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2011-Feb-03 03:20:06 LOG5 begin_task: Level: (4) ID = <10358> Status = 0 0 0 0 ok 2011-Feb-03 03:20:06 LOG4 from_mock: From MOCK: starok 2011-Feb-03 03:20:06 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2011-Feb-03 03:20:06 LOG5 end_task: Level: (4) ID = <10358> Status = 0 0 0 0 ok 2011-Feb-03 03:20:06 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2011-Feb-03 03:20:06 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 103400055 2011-Feb-03 03:20:06 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2011-Feb-03 03:20:06 LOG5 begin_task: Level: (4) ID = <10359> Status = 0 0 0 0 ok 2011-Feb-03 03:20:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2011-Feb-03 03:20:06 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2011-Feb-03 03:20:06 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2011-Feb-03 03:20:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2011-Feb-03 03:20:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26407.00 2011-Feb-03 03:20:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.341728 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2011-Feb-03 03:20:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.341728 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 03:20:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.341728 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 03:20:08 INFO2 got_mock_message: Mock spectrometer start file number is 01700 2011-Feb-03 03:20:08 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2011-Feb-03 03:20:08 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1199.9 s 2011-Feb-03 03:20:08 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2011-Feb-03 03:20:08 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2011-Feb-03 03:20:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.341728 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 03:20:08 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2011-Feb-03 03:20:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.341728 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 03:20:08 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2011-Feb-03 03:20:08 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2011-Feb-03 03:20:08 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2011-Feb-03 03:20:08 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2011-Feb-03 03:20:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.341728 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 03:20:08 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2011-Feb-03 03:20:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.341728 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 03:20:08 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2011-Feb-03 03:20:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.341728 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 03:20:08 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2011-Feb-03 03:20:08 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.16 GB 2011-Feb-03 03:20:08 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.16 GB 2011-Feb-03 03:20:08 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.16 GB 2011-Feb-03 03:20:08 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.16 GB 2011-Feb-03 03:20:08 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.16 GB 2011-Feb-03 03:20:08 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.16 GB 2011-Feb-03 03:20:08 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.16 GB 2011-Feb-03 03:20:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.341728 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2011-Feb-03 03:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.100 (still bad) 2011-Feb-03 03:20:11 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:20:11.02 2011-Feb-03 03:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.097 (still bad) 2011-Feb-03 03:20:11 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1296717611.02 Thu Feb 3 03:20:11 2011 2011-Feb-03 03:20:11 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2011-Feb-03 03:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.096 (still bad) 2011-Feb-03 03:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.102 (still bad) 2011-Feb-03 03:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.096 (still bad) 2011-Feb-03 03:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.096 (still bad) 2011-Feb-03 03:20:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 03:20:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 1.095 1.091 0.982 2011-Feb-03 03:20:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.033 0.942 0.958 1.098 2011-Feb-03 03:20:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.974 0.900 0.917 1.067 2011-Feb-03 03:20:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.089 0.036 0.930 0.043 2011-Feb-03 03:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.096 (still bad) 2011-Feb-03 03:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.097 (still bad) 2011-Feb-03 03:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.102 (still bad) 2011-Feb-03 03:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.098 (still bad) 2011-Feb-03 03:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.097 (still bad) 2011-Feb-03 03:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.098 (still bad) 2011-Feb-03 03:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.095 (still bad) 2011-Feb-03 03:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.097 (still bad) 2011-Feb-03 03:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.101 (still bad) 2011-Feb-03 03:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.096 (still bad) 2011-Feb-03 03:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.097 (still bad) 2011-Feb-03 03:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.098 (still bad) 2011-Feb-03 03:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.095 (still bad) 2011-Feb-03 03:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.096 (still bad) 2011-Feb-03 03:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.099 (still bad) 2011-Feb-03 03:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.097 (still bad) 2011-Feb-03 03:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.098 (still bad) 2011-Feb-03 03:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.101 (still bad) 2011-Feb-03 03:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.104 (still bad) 2011-Feb-03 03:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.116 (still bad) 2011-Feb-03 03:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.114 (still bad) 2011-Feb-03 03:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.107 (still bad) 2011-Feb-03 03:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.109 (still bad) 2011-Feb-03 03:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.101 (still bad) 2011-Feb-03 03:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.100 (still bad) 2011-Feb-03 03:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.102 (still bad) 2011-Feb-03 03:21:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 03:21:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.953 1.098 1.090 0.983 2011-Feb-03 03:21:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.035 0.944 0.957 1.098 2011-Feb-03 03:21:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.975 0.901 0.916 1.066 2011-Feb-03 03:21:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.091 0.036 0.930 0.043 2011-Feb-03 03:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.098 (still bad) 2011-Feb-03 03:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.103 (still bad) 2011-Feb-03 03:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.099 (still bad) 2011-Feb-03 03:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.099 (still bad) 2011-Feb-03 03:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.101 (still bad) 2011-Feb-03 03:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.099 (still bad) 2011-Feb-03 03:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.098 (still bad) 2011-Feb-03 03:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.104 (still bad) 2011-Feb-03 03:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.099 (still bad) 2011-Feb-03 03:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.099 (still bad) 2011-Feb-03 03:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.101 (still bad) 2011-Feb-03 03:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.098 (still bad) 2011-Feb-03 03:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.100 (still bad) 2011-Feb-03 03:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.038 and 1.105 (still bad) 2011-Feb-03 03:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.099 (still bad) 2011-Feb-03 03:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.099 (still bad) 2011-Feb-03 03:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.100 (still bad) 2011-Feb-03 03:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.100 (still bad) 2011-Feb-03 03:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.098 (still bad) 2011-Feb-03 03:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.105 (still bad) 2011-Feb-03 03:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.101 (still bad) 2011-Feb-03 03:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.100 (still bad) 2011-Feb-03 03:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.102 (still bad) 2011-Feb-03 03:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.100 (still bad) 2011-Feb-03 03:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.037 and 1.100 (still bad) 2011-Feb-03 03:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.107 (still bad) 2011-Feb-03 03:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.101 (still bad) 2011-Feb-03 03:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.102 (still bad) 2011-Feb-03 03:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.104 (still bad) 2011-Feb-03 03:22:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 03:22:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.948 1.095 1.092 0.984 2011-Feb-03 03:22:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.027 0.938 0.960 1.103 2011-Feb-03 03:22:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.979 0.903 0.933 1.086 2011-Feb-03 03:22:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.090 0.036 0.930 0.043 2011-Feb-03 03:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.104 (still bad) 2011-Feb-03 03:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.103 (still bad) 2011-Feb-03 03:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.104 (still bad) 2011-Feb-03 03:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.106 (still bad) 2011-Feb-03 03:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.105 (still bad) 2011-Feb-03 03:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.106 (still bad) 2011-Feb-03 03:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.107 (still bad) 2011-Feb-03 03:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.107 (still bad) 2011-Feb-03 03:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.105 (still bad) 2011-Feb-03 03:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.104 (still bad) 2011-Feb-03 03:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.103 (still bad) 2011-Feb-03 03:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.105 (still bad) 2011-Feb-03 03:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.117 (still bad) 2011-Feb-03 03:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 03:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.127 (still bad) 2011-Feb-03 03:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.126 (still bad) 2011-Feb-03 03:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.124 (still bad) 2011-Feb-03 03:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.119 (still bad) 2011-Feb-03 03:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.105 (still bad) 2011-Feb-03 03:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.103 (still bad) 2011-Feb-03 03:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.103 (still bad) 2011-Feb-03 03:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.105 (still bad) 2011-Feb-03 03:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.103 (still bad) 2011-Feb-03 03:23:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 03:23:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.947 1.090 1.092 0.983 2011-Feb-03 03:23:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.026 0.939 0.960 1.103 2011-Feb-03 03:23:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 0.901 0.925 1.075 2011-Feb-03 03:23:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.093 0.036 0.932 0.043 2011-Feb-03 03:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.103 (still bad) 2011-Feb-03 03:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.101 (still bad) 2011-Feb-03 03:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.101 (still bad) 2011-Feb-03 03:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.101 (still bad) 2011-Feb-03 03:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.100 (still bad) 2011-Feb-03 03:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.100 (still bad) 2011-Feb-03 03:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.038 and 1.101 (still bad) 2011-Feb-03 03:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.101 (still bad) 2011-Feb-03 03:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.099 (still bad) 2011-Feb-03 03:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.100 (still bad) 2011-Feb-03 03:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.099 (still bad) 2011-Feb-03 03:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.099 (still bad) 2011-Feb-03 03:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.038 and 1.102 (still bad) 2011-Feb-03 03:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.104 (still bad) 2011-Feb-03 03:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.104 (still bad) 2011-Feb-03 03:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.098 (still bad) 2011-Feb-03 03:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.098 (still bad) 2011-Feb-03 03:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.038 and 1.106 (still bad) 2011-Feb-03 03:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.104 (still bad) 2011-Feb-03 03:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.104 (still bad) 2011-Feb-03 03:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.110 (still bad) 2011-Feb-03 03:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.112 (still bad) 2011-Feb-03 03:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.038 and 1.115 (still bad) 2011-Feb-03 03:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.106 (still bad) 2011-Feb-03 03:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.105 (still bad) 2011-Feb-03 03:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.107 (still bad) 2011-Feb-03 03:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.108 (still bad) 2011-Feb-03 03:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.115 (still bad) 2011-Feb-03 03:24:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.038 < 0.75)! 2011-Feb-03 03:24:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 1.106 1.102 0.988 2011-Feb-03 03:24:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.031 0.944 0.983 1.126 2011-Feb-03 03:24:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.977 0.899 0.918 1.066 2011-Feb-03 03:24:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 0.038 0.937 0.044 2011-Feb-03 03:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.121 (still bad) 2011-Feb-03 03:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 03:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.120 (still bad) 2011-Feb-03 03:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.113 (still bad) 2011-Feb-03 03:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.109 (still bad) 2011-Feb-03 03:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.038 and 1.111 (still bad) 2011-Feb-03 03:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.101 (still bad) 2011-Feb-03 03:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.100 (still bad) 2011-Feb-03 03:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.100 (still bad) 2011-Feb-03 03:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.099 (still bad) 2011-Feb-03 03:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.100 (still bad) 2011-Feb-03 03:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.038 and 1.107 (still bad) 2011-Feb-03 03:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.099 (still bad) 2011-Feb-03 03:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.098 (still bad) 2011-Feb-03 03:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.098 (still bad) 2011-Feb-03 03:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.097 (still bad) 2011-Feb-03 03:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.098 (still bad) 2011-Feb-03 03:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.038 and 1.103 (still bad) 2011-Feb-03 03:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.097 (still bad) 2011-Feb-03 03:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.096 (still bad) 2011-Feb-03 03:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.098 (still bad) 2011-Feb-03 03:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.096 (still bad) 2011-Feb-03 03:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.096 (still bad) 2011-Feb-03 03:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.104 (still bad) 2011-Feb-03 03:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.096 (still bad) 2011-Feb-03 03:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.096 (still bad) 2011-Feb-03 03:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.099 (still bad) 2011-Feb-03 03:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.096 (still bad) 2011-Feb-03 03:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.036 and 1.096 (still bad) 2011-Feb-03 03:25:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.036 < 0.75)! 2011-Feb-03 03:25:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.949 1.092 1.093 0.980 2011-Feb-03 03:25:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.032