2010-Nov-03 22:22:53 BEGIN executive: CIMA executive starting ... 2010-Nov-03 22:22:53 NOTE executive: STARTING NEW CIMA SESSION 2010-Nov-03 22:22:53 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2010-Nov-03 22:22:53 INFO4 executive: This is an ON-LINE session 2010-Nov-03 22:22:53 INFO4 executive: This is a LOCAL session 2010-Nov-03 22:22:53 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2010-Nov-03 22:22:53 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'J. Hernandez' 2010-Nov-03 22:22:53 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20101103' 2010-Nov-03 22:22:54 LOG2 log_preferences: Currently applied preferences: 2010-Nov-03 22:22:54 LOG2 log_preferences: prefs(dailylog) = daily 2010-Nov-03 22:22:54 LOG2 log_preferences: prefs(offlinelog) = skip 2010-Nov-03 22:22:54 LOG2 log_preferences: prefs(datawindow) = ignore 2010-Nov-03 22:22:54 LOG2 log_preferences: prefs(limitwarning) = enabled 2010-Nov-03 22:22:54 LOG2 log_preferences: prefs(wappfailure) = abort 2010-Nov-03 22:22:54 LOG2 log_preferences: prefs(helpstyle) = stay-open 2010-Nov-03 22:22:54 LOG2 log_preferences: prefs(logcolours) = full 2010-Nov-03 22:22:54 LOG2 log_preferences: prefs(displaylevel) = INFO3 2010-Nov-03 22:22:54 LOG2 log_preferences: prefs(loglevel) = LOG5 2010-Nov-03 22:22:54 LOG2 log_preferences: prefs(displayformat) = short 2010-Nov-03 22:22:54 LOG2 log_preferences: prefs(logformat) = new 2010-Nov-03 22:22:54 LOG2 log_preferences: prefs(fontsize) = 4 2010-Nov-03 22:22:54 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2010-Nov-03 22:22:54 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2010-Nov-03 22:22:54 ALERT executive: CIMA executive ready 2010-Nov-03 22:22:55 NOTE frontend: CIMA frontend ready 2010-Nov-03 22:22:56 LOG4 got_cormsg: From DATATAKING: vw% setup 2010-Nov-03 22:23:01 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2010-Nov-03 22:23:01 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2010-Nov-03 22:23:01 LOG4 got_cormsg: From DATATAKING: vw% io 2010-Nov-03 22:23:01 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2010-Nov-03 22:23:01 LOG4 got_cormsg: From DATATAKING: 2010-Nov-03 22:23:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:23:01 LOG4 got_cormsg: From DATATAKING: tape stat 2010-Nov-03 22:23:01 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2010-Nov-03 22:23:01 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2010-Nov-03 22:23:01 LOG4 got_cormsg: From DATATAKING: vw% connectall 2010-Nov-03 22:23:01 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2010-Nov-03 22:23:01 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2010-Nov-03 22:23:01 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2010-Nov-03 22:23:01 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2010-Nov-03 22:23:01 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2010-Nov-03 22:23:01 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2010-Nov-03 22:23:01 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2010-Nov-03 22:23:02 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2010-Nov-03 22:23:02 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2010-Nov-03 22:23:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:23:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:23:47 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima31.cmd' (at lines 1 - 24) 2010-Nov-03 22:23:47 INFO4 CIMA-load_command_file: Loaded command file '101103.cmd' 2010-Nov-03 22:23:50 INFO1 CIMA-run_command_file: Transferring command file '101103.cmd' to executive ... 2010-Nov-03 22:23:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_cima31.conf} 2010-Nov-03 22:23:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2010-Nov-03 22:23:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2010-Nov-03 22:23:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2010-Nov-03 22:23:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2010-Nov-03 22:23:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2010-Nov-03 22:23:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2010-Nov-03 22:23:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2010-Nov-03 22:23:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2010-Nov-03 22:23:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2010-Nov-03 22:23:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2010-Nov-03 22:23:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2010-Nov-03 22:23:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2010-Nov-03 22:23:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 28 {LOAD ages_mock.conf} 2010-Nov-03 22:23:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 29 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2010-Nov-03 22:23:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 30 {CATALOG AGESFull.cat} 2010-Nov-03 22:23:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 33 {IF LSTSLEW(AGES33PP_p3_110) < 010138 THEN} 2010-Nov-03 22:23:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 34 {FIXEDDRIFT az=203.11 alfaangle=-3.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_110 ra=12400.00 dec=295630.00} 2010-Nov-03 22:23:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 37 {ENDIF} 2010-Nov-03 22:23:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 40 {IF LSTSLEW(AGES33PP_p1_004) < 012438 THEN} 2010-Nov-03 22:23:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 41 {FIXEDDRIFT az=180.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_004 ra=12400.00 dec=323530.00} 2010-Nov-03 22:23:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 44 {ENDIF} 2010-Nov-03 22:23:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 47 {IF LSTSLEW(AGES33PP_p3_112) < 014738 THEN} 2010-Nov-03 22:23:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 48 {FIXEDDRIFT az=156.79 alfaangle=41.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_112 ra=12400.00 dec=295330.00} 2010-Nov-03 22:23:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 51 {ENDIF} 2010-Nov-03 22:23:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 26 54 {IF LSTSLEW(AGES33PP_p3_155) < 021038 THEN} 2010-Nov-03 22:23:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 27 55 {FIXEDDRIFT az=137.15 alfaangle=62.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_155 ra=12400.00 dec=284900.00} 2010-Nov-03 22:23:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 28 58 {ENDIF} 2010-Nov-03 22:23:51 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Nov-03 22:23:51 LOG4 exec_msg: From OBSERVER: run_command_file 101103.cmd 1 1 28 2010-Nov-03 22:23:51 LOG4 run_command_file: Calling 'run_command_file 101103.cmd 1 1 28' 2010-Nov-03 22:23:51 BEGIN begin_task: Starting task 'running command file '101103.cmd'' 2010-Nov-03 22:23:51 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Nov-03 22:23:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '101103.cmd' ...} 2010-Nov-03 22:23:51 NOTE run_command_file: Starting execution of command file '101103.cmd' from line 1 2010-Nov-03 22:23:51 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_cima31.conf' 2010-Nov-03 22:23:51 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-Nov-03 22:23:51 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Nov-03 22:23:51 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-Nov-03 22:23:51 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima31.conf' 2010-Nov-03 22:23:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Nov-03 22:23:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Nov-03 22:23:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Nov-03 22:23:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Nov-03 22:23:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Nov-03 22:23:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Nov-03 22:23:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Nov-03 22:23:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Nov-03 22:23:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Nov-03 22:23:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Nov-03 22:23:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Nov-03 22:23:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Nov-03 22:23:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Nov-03 22:23:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Nov-03 22:23:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Nov-03 22:23:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Nov-03 22:23:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Nov-03 22:23:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Nov-03 22:23:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Nov-03 22:23:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Nov-03 22:23:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Nov-03 22:23:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Nov-03 22:23:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Nov-03 22:23:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Nov-03 22:23:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Nov-03 22:23:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Nov-03 22:23:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Nov-03 22:23:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Nov-03 22:23:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Nov-03 22:23:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Nov-03 22:23:53 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Nov-03 22:23:53 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Nov-03 22:23:53 LOG5 begin_task: Level: (2) ID = <10002> Status = 0 0 0 0 ok 2010-Nov-03 22:23:53 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Nov-03 22:23:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Nov-03 22:23:53 INFO1 config_iflo: Selecting receiver ALFA 2010-Nov-03 22:23:53 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2010-Nov-03 22:23:53 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2010-Nov-03 22:23:53 START begin_task: Starting task 'selecting receiver ALFA' 2010-Nov-03 22:23:53 LOG5 begin_task: Level: (3) ID = <10003> Status = 0 0 0 0 ok 2010-Nov-03 22:23:53 NOTE select_receiver: Starting to select receiver ALFA 2010-Nov-03 22:23:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-Nov-03 22:23:53 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-Nov-03 22:23:53 LOG3 vw_send: To DATATAKING: acvlbical off 2010-Nov-03 22:23:53 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-Nov-03 22:23:53 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-Nov-03 22:23:53 LOG5 finish_task: Level: (3) ID = <10003> Status = 0 0 0 0 ok 2010-Nov-03 22:23:53 INFO2 finish_task: DONE finished selecting: receiver ALFA 2010-Nov-03 22:23:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Nov-03 22:23:53 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-Nov-03 22:23:53 LOG5 end_task: Level: (3) ID = <10003> Status = 0 0 0 0 ok 2010-Nov-03 22:23:53 START begin_task: Starting task 'waiting for receiver ALFA' 2010-Nov-03 22:23:53 LOG5 begin_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2010-Nov-03 22:23:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 131.4 BITMAP stat_alfa_rot INFO {Waiting on rotating floor} 2010-Nov-03 22:23:53 START begin_task: Starting task 'waiting on waiting for receiver rotation' 2010-Nov-03 22:23:53 LOG5 begin_task: Level: (4) ID = <10005> Status = 0 0 0 0 ok 2010-Nov-03 22:23:53 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-Nov-03 22:23:53 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-Nov-03 22:24:00 LOG4 got_cormsg: From DATATAKING: waiting for turret position:26.64 2010-Nov-03 22:26:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:26:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:26:06 STOP end_task: Finishing task 'waiting on waiting for receiver rotation' with status 'OK' 2010-Nov-03 22:26:06 LOG5 end_task: Level: (4) ID = <10005> Status = 0 0 0 0 ok 2010-Nov-03 22:26:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT 2010-Nov-03 22:26:06 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2010-Nov-03 22:26:06 LOG5 end_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2010-Nov-03 22:26:06 INFO1 config_iflo: Configuring rest of the IF/LO path 2010-Nov-03 22:26:06 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2010-Nov-03 22:26:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Nov-03 22:26:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Nov-03 22:26:06 START begin_task: Starting task 'waiting on command to ALFA' 2010-Nov-03 22:26:06 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-Nov-03 22:26:06 LOG4 got_alfamon: From ALFAMON: ACK 2010-Nov-03 22:26:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Nov-03 22:26:06 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-Nov-03 22:26:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Nov-03 22:26:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Nov-03 22:26:06 LOG3 vw_send: To DATATAKING: alfafb 1 2010-Nov-03 22:26:06 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2010-Nov-03 22:26:06 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Nov-03 22:26:06 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Nov-03 22:26:06 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2010-Nov-03 22:26:06 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2010-Nov-03 22:26:06 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2010-Nov-03 22:26:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Nov-03 22:26:06 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2010-Nov-03 22:26:06 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2010-Nov-03 22:26:06 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Nov-03 22:26:06 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Nov-03 22:26:06 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Nov-03 22:26:06 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Nov-03 22:26:06 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Nov-03 22:26:06 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2010-Nov-03 22:26:06 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2010-Nov-03 22:26:06 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2010-Nov-03 22:26:06 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2010-Nov-03 22:26:06 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-Nov-03 22:26:06 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2010-Nov-03 22:26:06 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-Nov-03 22:26:06 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Nov-03 22:26:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 22:26:06 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Nov-03 22:26:06 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2010-Nov-03 22:26:06 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Nov-03 22:26:06 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2010-Nov-03 22:26:06 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2010-Nov-03 22:26:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Nov-03 22:26:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:26:06 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Nov-03 22:26:06 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2010-Nov-03 22:26:06 LOG4 got_cormsg: From DATATAKING: alfafb 1 2010-Nov-03 22:26:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2010-Nov-03 22:26:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2010-Nov-03 22:26:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2010-Nov-03 22:26:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2010-Nov-03 22:26:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Nov-03 22:26:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2010-Nov-03 22:26:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2010-Nov-03 22:26:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2010-Nov-03 22:26:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2010-Nov-03 22:26:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2010-Nov-03 22:26:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2010-Nov-03 22:26:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-Nov-03 22:26:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2010-Nov-03 22:26:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-Nov-03 22:26:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 22:26:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Nov-03 22:26:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2010-Nov-03 22:26:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2010-Nov-03 22:26:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2010-Nov-03 22:26:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:26:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:26:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:26:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:26:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:26:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:26:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:26:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:26:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:26:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:26:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:26:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:26:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:26:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:26:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:26:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:26:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:26:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:26:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:26:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:26:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:26:15 LOG4 got_cormsg: From DATATAKING: DONE 2010-Nov-03 22:26:15 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Nov-03 22:26:15 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2010-Nov-03 22:26:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Nov-03 22:26:15 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Nov-03 22:26:15 LOG5 finish_task: Level: (2) ID = <10002> Status = 0 0 0 0 ok 2010-Nov-03 22:26:15 DONE finish_task: DONE finished configuration: IF/LO path 2010-Nov-03 22:26:15 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 22:26:15 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Nov-03 22:26:15 LOG5 end_task: Level: (2) ID = <10002> Status = 0 0 0 0 ok 2010-Nov-03 22:26:15 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Nov-03 22:26:15 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2010-Nov-03 22:26:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Nov-03 22:26:15 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Nov-03 22:26:15 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Nov-03 22:26:15 START begin_task: Starting task 'selecting calibration port' 2010-Nov-03 22:26:15 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2010-Nov-03 22:26:15 LOG3 vw_send: To DATATAKING: calport 3 2010-Nov-03 22:26:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Nov-03 22:26:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:26:15 START begin_task: Starting task 'waiting on calport' 2010-Nov-03 22:26:15 LOG5 begin_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2010-Nov-03 22:26:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:26:15 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Nov-03 22:26:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:26:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:26:15 LOG4 got_cormsg: From DATATAKING: DONE 2010-Nov-03 22:26:15 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Nov-03 22:26:15 LOG5 end_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2010-Nov-03 22:26:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Nov-03 22:26:16 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Nov-03 22:26:16 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2010-Nov-03 22:26:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Nov-03 22:26:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Nov-03 22:26:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Nov-03 22:26:16 LOG5 begin_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2010-Nov-03 22:26:16 LOG3 CALCONTROL-caltrig: Software trigger 2010-Nov-03 22:26:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:26:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Nov-03 22:26:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Nov-03 22:26:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Nov-03 22:26:16 LOG5 end_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2010-Nov-03 22:26:16 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Nov-03 22:26:16 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Nov-03 22:26:16 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Nov-03 22:26:16 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Nov-03 22:26:16 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Nov-03 22:26:16 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Nov-03 22:26:16 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Nov-03 22:26:16 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Nov-03 22:26:16 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 J. Hernandez 2010-Nov-03 22:26:16 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 J. Hernandez 2010-Nov-03 22:26:16 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 J. Hernandez 2010-Nov-03 22:26:16 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 J. Hernandez 2010-Nov-03 22:26:16 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Nov-03 22:26:16 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Nov-03 22:26:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Nov-03 22:26:16 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2010-Nov-03 22:26:16 LOG3 CALCONTROL-caltrig: Software trigger 2010-Nov-03 22:26:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Nov-03 22:26:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Nov-03 22:26:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Nov-03 22:26:16 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2010-Nov-03 22:26:16 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 J. Hernandez 2010-Nov-03 22:26:16 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 J. Hernandez 2010-Nov-03 22:26:16 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 J. Hernandez 2010-Nov-03 22:26:16 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 J. Hernandez 2010-Nov-03 22:26:16 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Nov-03 22:26:16 LOG5 finish_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2010-Nov-03 22:26:16 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Nov-03 22:26:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 22:26:16 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Nov-03 22:26:16 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2010-Nov-03 22:26:16 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2010-Nov-03 22:26:16 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2010-Nov-03 22:26:17 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2010-Nov-03 22:26:17 LOG3 is_if_valid: Current source data: down 453.8 31.3 1222 - - 1387 6.2 2010-Nov-03 22:26:17 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2010-Nov-03 22:26:17 INFO5 is_if_valid: Condition parsed as: 0 2010-Nov-03 22:26:17 INFO1 is_if_valid: Skipping line 'IF isup(galfasrc) then' 2010-Nov-03 22:26:17 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2010-Nov-03 22:26:17 INFO1 run_command_line: Skipping line 'GOTO galfasrc' in non-true conditional branch 2010-Nov-03 22:26:17 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2010-Nov-03 22:26:17 LOG3 is_if_valid: Current source data: up 561.3 13.4 UP - - 90 7.5 2010-Nov-03 22:26:17 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc2) 2010-Nov-03 22:26:17 INFO5 is_if_valid: Condition parsed as: 1 2010-Nov-03 22:26:17 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2010-Nov-03 22:26:17 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc2 nooffset nowait' 2010-Nov-03 22:26:17 BEGIN begin_task: Starting task 'tracking source 'galfasrc2'' 2010-Nov-03 22:26:17 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2010-Nov-03 22:26:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc2' ...} 2010-Nov-03 22:26:17 LOG3 track_source: Calling 'track_source galfasrc2 011400.0 +304000 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2010-Nov-03 22:26:17 START begin_task: Starting task 'sending tracking commands' 2010-Nov-03 22:26:17 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2010-Nov-03 22:26:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc2} INFO {Slewing to source 'galfasrc2' ...} 2010-Nov-03 22:26:17 INFO1 track_source: Starting to track galfasrc2 2010-Nov-03 22:26:17 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc2" 2010-Nov-03 22:26:17 LOG3 vw_send: To DATATAKING: set ra 011400.0 2010-Nov-03 22:26:17 LOG3 vw_send: To DATATAKING: set dec +304000 2010-Nov-03 22:26:17 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Nov-03 22:26:17 LOG3 vw_send: To DATATAKING: pnt tr 011400.0 +304000 -CJ 2010-Nov-03 22:26:17 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Nov-03 22:26:17 STOP finish_task: Finishing task 'sending tracking commands' 2010-Nov-03 22:26:17 LOG5 finish_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2010-Nov-03 22:26:17 INFO2 finish_task: DONE finished sending: tracking commands 2010-Nov-03 22:26:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Nov-03 22:26:17 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Nov-03 22:26:17 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2010-Nov-03 22:26:17 STOP finish_task: Finishing task 'tracking source 'galfasrc2'' 2010-Nov-03 22:26:17 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2010-Nov-03 22:26:17 DONE finish_task: DONE finished tracking: source 'galfasrc2' 2010-Nov-03 22:26:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 22:26:17 END end_task: Finishing task 'tracking source 'galfasrc2'' with status 'OK' 2010-Nov-03 22:26:17 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2010-Nov-03 22:26:17 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2010-Nov-03 22:26:17 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2010-Nov-03 22:26:17 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2010-Nov-03 22:26:17 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2010-Nov-03 22:26:18 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2010-Nov-03 22:26:18 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2010-Nov-03 22:26:18 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2010-Nov-03 22:26:18 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2010-Nov-03 22:26:18 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2010-Nov-03 22:26:18 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Nov-03 22:26:18 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2010-Nov-03 22:26:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Nov-03 22:26:18 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Nov-03 22:26:18 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2010-Nov-03 22:26:18 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Nov-03 22:26:18 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Nov-03 22:26:18 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-Nov-03 22:26:18 NOTE WAPPDATA-new_file: New FITS file: wapp.20101103.a2048.0000.fits 2010-Nov-03 22:26:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 J. Hernandez' 2010-Nov-03 22:26:18 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc2" 2010-Nov-03 22:26:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Nov-03 22:26:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Nov-03 22:26:18 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20101103.a2048.0000.fits} 2010-Nov-03 22:26:18 LOG4 got_cormsg: From DATATAKING: set ra 011400.0 2010-Nov-03 22:26:18 LOG4 got_cormsg: From DATATAKING: set dec +304000 2010-Nov-03 22:26:18 LOG4 got_cormsg: From DATATAKING: vw% 011400.0 2010-Nov-03 22:26:18 LOG4 got_cormsg: From DATATAKING: vw% +304000 2010-Nov-03 22:26:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:26:18 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Nov-03 22:26:18 LOG4 got_cormsg: From DATATAKING: pnt tr 011400.0 +304000 -CJ 2010-Nov-03 22:26:18 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Nov-03 22:26:18 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Nov-03 22:26:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:26:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 J. Hernandez' 2010-Nov-03 22:28:48 ERROR end_wait_seconds: ERROR timed out while waiting for ALFA rotation! 2010-Nov-03 22:28:48 LOG1 task_failed: Task 'waiting on ALFA rotation' failed! 2010-Nov-03 22:28:48 LOG5 task_failed: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-Nov-03 22:28:48 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'FAILED' 2010-Nov-03 22:28:48 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 1 failed 2010-Nov-03 22:28:48 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Nov-03 22:28:48 ALERT rotate_alfa: Current ALFA angle is +62.1 degrees! 2010-Nov-03 22:28:48 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Nov-03 22:28:48 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 1 failed 2010-Nov-03 22:28:48 ERROR finish_task: ERROR failed configuration: rotating ALFA to +19 degrees 2010-Nov-03 22:28:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Nov-03 22:28:48 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'FAILED' 2010-Nov-03 22:28:48 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 1 failed 2010-Nov-03 22:28:48 ALERT run_command_file: Stopping command file processing at line 15! 2010-Nov-03 22:28:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Nov-03 22:28:48 STOP finish_task: Finishing task 'running command file '101103.cmd'' 2010-Nov-03 22:28:48 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 1 failed 2010-Nov-03 22:28:48 ERROR finish_task: ERROR failed running: command file '101103.cmd' 2010-Nov-03 22:28:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Nov-03 22:28:48 END end_task: Finishing task 'running command file '101103.cmd'' with status 'FAILED' 2010-Nov-03 22:28:48 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 1 failed 2010-Nov-03 22:29:56 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima31.cmd' (at lines 1 - 24) 2010-Nov-03 22:29:56 INFO4 CIMA-load_command_file: Loaded command file '101103.cmd' 2010-Nov-03 22:29:59 INFO1 CIMA-run_command_file: Transferring command file '101103.cmd' to executive ... 2010-Nov-03 22:29:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_cima31.conf} 2010-Nov-03 22:29:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2010-Nov-03 22:29:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2010-Nov-03 22:29:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2010-Nov-03 22:29:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2010-Nov-03 22:29:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2010-Nov-03 22:29:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2010-Nov-03 22:29:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2010-Nov-03 22:29:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2010-Nov-03 22:29:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2010-Nov-03 22:29:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2010-Nov-03 22:29:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2010-Nov-03 22:29:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2010-Nov-03 22:29:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 28 {LOAD ages_mock.conf} 2010-Nov-03 22:29:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 29 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2010-Nov-03 22:29:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 30 {CATALOG AGESFull.cat} 2010-Nov-03 22:29:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 33 {IF LSTSLEW(AGES33PP_p3_110) < 010138 THEN} 2010-Nov-03 22:29:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 34 {FIXEDDRIFT az=203.11 alfaangle=-3.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_110 ra=12400.00 dec=295630.00} 2010-Nov-03 22:29:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 37 {ENDIF} 2010-Nov-03 22:29:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 40 {IF LSTSLEW(AGES33PP_p1_004) < 012438 THEN} 2010-Nov-03 22:29:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 41 {FIXEDDRIFT az=180.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_004 ra=12400.00 dec=323530.00} 2010-Nov-03 22:29:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 44 {ENDIF} 2010-Nov-03 22:29:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 47 {IF LSTSLEW(AGES33PP_p3_112) < 014738 THEN} 2010-Nov-03 22:30:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 48 {FIXEDDRIFT az=156.79 alfaangle=41.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_112 ra=12400.00 dec=295330.00} 2010-Nov-03 22:30:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 51 {ENDIF} 2010-Nov-03 22:30:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 26 54 {IF LSTSLEW(AGES33PP_p3_155) < 021038 THEN} 2010-Nov-03 22:30:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 27 55 {FIXEDDRIFT az=137.15 alfaangle=62.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_155 ra=12400.00 dec=284900.00} 2010-Nov-03 22:30:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 28 58 {ENDIF} 2010-Nov-03 22:30:00 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Nov-03 22:30:00 LOG4 exec_msg: From OBSERVER: run_command_file 101103.cmd 1 1 28 2010-Nov-03 22:30:00 LOG4 run_command_file: Calling 'run_command_file 101103.cmd 1 1 28' 2010-Nov-03 22:30:00 BEGIN begin_task: Starting task 'running command file '101103.cmd'' 2010-Nov-03 22:30:00 LOG5 begin_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2010-Nov-03 22:30:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '101103.cmd' ...} 2010-Nov-03 22:30:00 NOTE run_command_file: Starting execution of command file '101103.cmd' from line 1 2010-Nov-03 22:30:00 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_cima31.conf' 2010-Nov-03 22:30:00 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-Nov-03 22:30:00 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Nov-03 22:30:00 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-Nov-03 22:30:00 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima31.conf' 2010-Nov-03 22:30:00 LOG2 CIMA-antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84309 J 2010-Nov-03 22:30:00 LOG2 CIMA-antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 22:30:00 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 95400 2010 307 0.0 2010-Nov-03 22:30:00 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 22:30:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Nov-03 22:30:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Nov-03 22:30:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Nov-03 22:30:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Nov-03 22:30:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Nov-03 22:30:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2010-Nov-03 22:30:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Nov-03 22:30:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Nov-03 22:30:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Nov-03 22:30:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Nov-03 22:30:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Nov-03 22:30:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Nov-03 22:30:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Nov-03 22:30:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Nov-03 22:30:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Nov-03 22:30:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Nov-03 22:30:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Nov-03 22:30:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Nov-03 22:30:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Nov-03 22:30:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Nov-03 22:30:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Nov-03 22:30:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Nov-03 22:30:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Nov-03 22:30:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Nov-03 22:30:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Nov-03 22:30:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Nov-03 22:30:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Nov-03 22:30:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Nov-03 22:30:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Nov-03 22:30:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Nov-03 22:30:02 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Nov-03 22:30:02 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Nov-03 22:30:02 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2010-Nov-03 22:30:02 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Nov-03 22:30:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Nov-03 22:30:02 LOG1 config_iflo: Receiver ALFA already selected 2010-Nov-03 22:30:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Nov-03 22:30:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Nov-03 22:30:02 START begin_task: Starting task 'waiting on command to ALFA' 2010-Nov-03 22:30:02 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2010-Nov-03 22:30:02 LOG4 got_alfamon: From ALFAMON: ACK 2010-Nov-03 22:30:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Nov-03 22:30:02 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2010-Nov-03 22:30:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Nov-03 22:30:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Nov-03 22:30:02 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2010-Nov-03 22:30:02 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2010-Nov-03 22:30:02 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Nov-03 22:30:02 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Nov-03 22:30:02 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2010-Nov-03 22:30:02 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2010-Nov-03 22:30:02 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2010-Nov-03 22:30:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Nov-03 22:30:02 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2010-Nov-03 22:30:02 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2010-Nov-03 22:30:02 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Nov-03 22:30:02 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Nov-03 22:30:02 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Nov-03 22:30:02 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Nov-03 22:30:02 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Nov-03 22:30:02 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2010-Nov-03 22:30:02 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2010-Nov-03 22:30:02 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2010-Nov-03 22:30:02 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2010-Nov-03 22:30:02 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2010-Nov-03 22:30:02 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2010-Nov-03 22:30:02 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2010-Nov-03 22:30:02 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Nov-03 22:30:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 22:30:02 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2010-Nov-03 22:30:02 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2010-Nov-03 22:30:02 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Nov-03 22:30:02 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2010-Nov-03 22:30:02 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2010-Nov-03 22:30:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Nov-03 22:30:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:30:02 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Nov-03 22:30:02 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Nov-03 22:30:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Nov-03 22:30:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 22:30:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:30:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:30:02 LOG4 got_cormsg: From DATATAKING: vw% DONE 2010-Nov-03 22:30:02 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Nov-03 22:30:02 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Nov-03 22:30:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Nov-03 22:30:02 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Nov-03 22:30:02 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2010-Nov-03 22:30:02 DONE finish_task: DONE finished configuration: IF/LO path 2010-Nov-03 22:30:02 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 22:30:03 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Nov-03 22:30:03 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2010-Nov-03 22:30:03 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Nov-03 22:30:03 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2010-Nov-03 22:30:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Nov-03 22:30:03 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Nov-03 22:30:03 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Nov-03 22:30:03 START begin_task: Starting task 'selecting calibration port' 2010-Nov-03 22:30:03 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2010-Nov-03 22:30:03 LOG3 vw_send: To DATATAKING: calport 3 2010-Nov-03 22:30:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Nov-03 22:30:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:30:03 START begin_task: Starting task 'waiting on calport' 2010-Nov-03 22:30:03 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2010-Nov-03 22:30:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:30:03 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Nov-03 22:30:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:30:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:30:03 LOG4 got_cormsg: From DATATAKING: DONE 2010-Nov-03 22:30:03 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Nov-03 22:30:03 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2010-Nov-03 22:30:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Nov-03 22:30:03 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Nov-03 22:30:03 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2010-Nov-03 22:30:03 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Nov-03 22:30:03 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Nov-03 22:30:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Nov-03 22:30:03 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2010-Nov-03 22:30:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:30:03 LOG3 CALCONTROL-caltrig: Software trigger 2010-Nov-03 22:30:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Nov-03 22:30:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Nov-03 22:30:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Nov-03 22:30:03 LOG5 end_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2010-Nov-03 22:30:03 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Nov-03 22:30:03 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Nov-03 22:30:03 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Nov-03 22:30:03 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Nov-03 22:30:03 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Nov-03 22:30:03 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Nov-03 22:30:03 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Nov-03 22:30:03 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Nov-03 22:30:03 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 J. Hernandez 2010-Nov-03 22:30:03 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 J. Hernandez 2010-Nov-03 22:30:03 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 J. Hernandez 2010-Nov-03 22:30:03 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 J. Hernandez 2010-Nov-03 22:30:03 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Nov-03 22:30:03 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Nov-03 22:30:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Nov-03 22:30:03 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2010-Nov-03 22:30:03 LOG3 CALCONTROL-caltrig: Software trigger 2010-Nov-03 22:30:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Nov-03 22:30:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Nov-03 22:30:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Nov-03 22:30:04 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2010-Nov-03 22:30:04 LOG3 sock_errsend: To WAPPDATA: FLUSH 2010-Nov-03 22:30:04 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Nov-03 22:30:04 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2010-Nov-03 22:30:04 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Nov-03 22:30:04 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 22:30:04 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Nov-03 22:30:04 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2010-Nov-03 22:30:04 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2010-Nov-03 22:30:04 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2010-Nov-03 22:30:04 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2010-Nov-03 22:30:04 LOG3 is_if_valid: Current source data: down 454.0 32.2 1218 - - 1384 2.7 2010-Nov-03 22:30:04 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2010-Nov-03 22:30:04 INFO5 is_if_valid: Condition parsed as: 0 2010-Nov-03 22:30:04 INFO1 is_if_valid: Skipping line 'IF isup(galfasrc) then' 2010-Nov-03 22:30:04 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2010-Nov-03 22:30:04 INFO1 run_command_line: Skipping line 'GOTO galfasrc' in non-true conditional branch 2010-Nov-03 22:30:04 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2010-Nov-03 22:30:04 LOG3 is_if_valid: Current source data: up 558.0 13.1 UP - - 86 3.5 2010-Nov-03 22:30:04 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc2) 2010-Nov-03 22:30:04 INFO5 is_if_valid: Condition parsed as: 1 2010-Nov-03 22:30:04 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2010-Nov-03 22:30:04 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc2 nooffset nowait' 2010-Nov-03 22:30:04 BEGIN begin_task: Starting task 'tracking source 'galfasrc2'' 2010-Nov-03 22:30:04 LOG5 begin_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2010-Nov-03 22:30:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc2' ...} 2010-Nov-03 22:30:04 LOG3 track_source: Calling 'track_source galfasrc2 011400.0 +304000 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2010-Nov-03 22:30:04 START begin_task: Starting task 'sending tracking commands' 2010-Nov-03 22:30:04 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Nov-03 22:30:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc2} INFO {Slewing to source 'galfasrc2' ...} 2010-Nov-03 22:30:04 INFO1 track_source: Starting to track galfasrc2 2010-Nov-03 22:30:04 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc2" 2010-Nov-03 22:30:04 LOG3 vw_send: To DATATAKING: set ra 011400.0 2010-Nov-03 22:30:04 LOG3 vw_send: To DATATAKING: set dec +304000 2010-Nov-03 22:30:04 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Nov-03 22:30:04 LOG3 vw_send: To DATATAKING: pnt tr 011400.0 +304000 -CJ 2010-Nov-03 22:30:04 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Nov-03 22:30:04 STOP finish_task: Finishing task 'sending tracking commands' 2010-Nov-03 22:30:04 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Nov-03 22:30:04 INFO2 finish_task: DONE finished sending: tracking commands 2010-Nov-03 22:30:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Nov-03 22:30:04 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Nov-03 22:30:04 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Nov-03 22:30:04 STOP finish_task: Finishing task 'tracking source 'galfasrc2'' 2010-Nov-03 22:30:04 LOG5 finish_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2010-Nov-03 22:30:04 DONE finish_task: DONE finished tracking: source 'galfasrc2' 2010-Nov-03 22:30:04 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 22:30:05 END end_task: Finishing task 'tracking source 'galfasrc2'' with status 'OK' 2010-Nov-03 22:30:05 LOG5 end_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2010-Nov-03 22:30:05 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2010-Nov-03 22:30:05 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2010-Nov-03 22:30:05 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2010-Nov-03 22:30:05 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2010-Nov-03 22:30:05 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2010-Nov-03 22:30:05 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2010-Nov-03 22:30:05 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2010-Nov-03 22:30:05 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2010-Nov-03 22:30:05 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2010-Nov-03 22:30:05 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Nov-03 22:30:05 LOG5 begin_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2010-Nov-03 22:30:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Nov-03 22:30:05 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Nov-03 22:30:05 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2010-Nov-03 22:30:05 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Nov-03 22:30:05 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Nov-03 22:30:05 LOG5 begin_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2010-Nov-03 22:30:05 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Nov-03 22:30:05 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc2" 2010-Nov-03 22:30:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Nov-03 22:30:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Nov-03 22:30:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 J. Hernandez' 2010-Nov-03 22:30:05 LOG4 got_cormsg: From DATATAKING: set ra 011400.0 2010-Nov-03 22:30:05 LOG4 got_cormsg: From DATATAKING: set dec +304000 2010-Nov-03 22:30:05 LOG4 got_cormsg: From DATATAKING: vw% 011400.0 2010-Nov-03 22:30:05 LOG4 got_cormsg: From DATATAKING: vw% +304000 2010-Nov-03 22:30:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:30:05 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Nov-03 22:30:05 LOG4 got_cormsg: From DATATAKING: pnt tr 011400.0 +304000 -CJ 2010-Nov-03 22:30:05 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Nov-03 22:30:05 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Nov-03 22:30:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:32:35 ERROR end_wait_seconds: ERROR timed out while waiting for ALFA rotation! 2010-Nov-03 22:32:35 LOG1 task_failed: Task 'waiting on ALFA rotation' failed! 2010-Nov-03 22:32:35 LOG5 task_failed: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2010-Nov-03 22:32:35 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'FAILED' 2010-Nov-03 22:32:35 LOG5 end_task: Level: (3) ID = <10029> Status = 0 0 0 1 failed 2010-Nov-03 22:32:35 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Nov-03 22:32:35 ALERT rotate_alfa: Current ALFA angle is +62.1 degrees! 2010-Nov-03 22:32:35 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Nov-03 22:32:35 LOG5 finish_task: Level: (2) ID = <10028> Status = 0 0 0 1 failed 2010-Nov-03 22:32:35 ERROR finish_task: ERROR failed configuration: rotating ALFA to +19 degrees 2010-Nov-03 22:32:35 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Nov-03 22:32:35 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'FAILED' 2010-Nov-03 22:32:35 LOG5 end_task: Level: (2) ID = <10028> Status = 0 0 0 1 failed 2010-Nov-03 22:32:35 ALERT run_command_file: Stopping command file processing at line 15! 2010-Nov-03 22:32:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Nov-03 22:32:35 STOP finish_task: Finishing task 'running command file '101103.cmd'' 2010-Nov-03 22:32:35 LOG5 finish_task: Level: (1) ID = <10017> Status = 0 0 0 1 failed 2010-Nov-03 22:32:35 ERROR finish_task: ERROR failed running: command file '101103.cmd' 2010-Nov-03 22:32:35 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Nov-03 22:32:35 END end_task: Finishing task 'running command file '101103.cmd'' with status 'FAILED' 2010-Nov-03 22:32:35 LOG5 end_task: Level: (1) ID = <10017> Status = 0 0 0 1 failed 2010-Nov-03 22:33:45 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima31.cmd' (at lines 1 - 24) 2010-Nov-03 22:33:45 INFO4 CIMA-load_command_file: Loaded command file '101103.cmd' 2010-Nov-03 22:34:22 COMMAND CIMA-send_to_exec: Sending command to stop observation 2010-Nov-03 22:34:22 LOG4 exec_msg: From OBSERVER: stop_task 2010-Nov-03 22:34:22 WARNING stop_task: WARNING stop at end of current loop/command requested! 2010-Nov-03 22:34:24 COMMAND CIMA-send_to_exec: Sending command to abort observation 2010-Nov-03 22:34:24 LOG4 exec_msg: From OBSERVER: abort_task abort 2010-Nov-03 22:34:24 WARNING abort_task: WARNING abort requested! 2010-Nov-03 22:34:26 ALERT CIMA-exit_cima: Exiting CIMA ... 2010-Nov-03 22:34:26 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2010-Nov-03 22:34:26 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2010-Nov-03 22:34:26 LOG3 vw_send: To DATATAKING: mvdata a2048 2010-Nov-03 22:34:26 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2010-Nov-03 22:34:26 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2010-Nov-03 22:34:26 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2010-Nov-03 22:34:27 LOG4 got_cormsg: From DATATAKING: mvdata a2048 2010-Nov-03 22:34:27 NOTE CIMA-exit_cima: Cleaning up session ... 2010-Nov-03 22:34:27 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2010-Nov-03 22:34:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:34:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:34:29 LOG3 exec_msg: Closing socket 2010-Nov-03 22:35:07 BEGIN executive: CIMA executive starting ... 2010-Nov-03 22:35:07 NOTE executive: STARTING NEW CIMA SESSION 2010-Nov-03 22:35:07 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2010-Nov-03 22:35:07 INFO4 executive: This is an ON-LINE session 2010-Nov-03 22:35:07 INFO4 executive: This is a LOCAL session 2010-Nov-03 22:35:07 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2010-Nov-03 22:35:07 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'J. Hernandez' 2010-Nov-03 22:35:07 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20101103' 2010-Nov-03 22:35:07 LOG2 log_preferences: Currently applied preferences: 2010-Nov-03 22:35:07 LOG2 log_preferences: prefs(dailylog) = daily 2010-Nov-03 22:35:07 LOG2 log_preferences: prefs(offlinelog) = skip 2010-Nov-03 22:35:07 LOG2 log_preferences: prefs(datawindow) = ignore 2010-Nov-03 22:35:07 LOG2 log_preferences: prefs(limitwarning) = enabled 2010-Nov-03 22:35:07 LOG2 log_preferences: prefs(wappfailure) = abort 2010-Nov-03 22:35:07 LOG2 log_preferences: prefs(helpstyle) = stay-open 2010-Nov-03 22:35:07 LOG2 log_preferences: prefs(logcolours) = full 2010-Nov-03 22:35:07 LOG2 log_preferences: prefs(displaylevel) = INFO3 2010-Nov-03 22:35:07 LOG2 log_preferences: prefs(loglevel) = LOG5 2010-Nov-03 22:35:07 LOG2 log_preferences: prefs(displayformat) = short 2010-Nov-03 22:35:07 LOG2 log_preferences: prefs(logformat) = new 2010-Nov-03 22:35:07 LOG2 log_preferences: prefs(fontsize) = 4 2010-Nov-03 22:35:07 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2010-Nov-03 22:35:07 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2010-Nov-03 22:35:07 ALERT executive: CIMA executive ready 2010-Nov-03 22:35:09 NOTE frontend: CIMA frontend ready 2010-Nov-03 22:35:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:09 LOG4 got_cormsg: From DATATAKING: setup 2010-Nov-03 22:35:13 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2010-Nov-03 22:35:13 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2010-Nov-03 22:35:13 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2010-Nov-03 22:35:13 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2010-Nov-03 22:35:13 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Nov-03 22:35:13 NOTE select_receiver: Starting to select receiver ALFA 2010-Nov-03 22:35:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-Nov-03 22:35:13 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-Nov-03 22:35:13 LOG3 vw_send: To DATATAKING: acvlbical off 2010-Nov-03 22:35:13 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-Nov-03 22:35:13 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-Nov-03 22:35:13 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Nov-03 22:35:13 DONE finish_task: DONE finished selecting: receiver ALFA 2010-Nov-03 22:35:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 22:35:13 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-Nov-03 22:35:13 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Nov-03 22:35:14 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2010-Nov-03 22:35:14 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2010-Nov-03 22:35:14 LOG4 got_cormsg: From DATATAKING: vw% io 2010-Nov-03 22:35:14 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2010-Nov-03 22:35:14 LOG4 got_cormsg: From DATATAKING: 2010-Nov-03 22:35:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:14 LOG4 got_cormsg: From DATATAKING: tape stat 2010-Nov-03 22:35:14 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2010-Nov-03 22:35:14 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2010-Nov-03 22:35:15 LOG4 got_cormsg: From DATATAKING: vw% connectall 2010-Nov-03 22:35:15 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2010-Nov-03 22:35:15 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2010-Nov-03 22:35:15 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2010-Nov-03 22:35:15 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2010-Nov-03 22:35:15 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2010-Nov-03 22:35:15 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2010-Nov-03 22:35:15 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2010-Nov-03 22:35:15 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2010-Nov-03 22:35:15 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2010-Nov-03 22:35:15 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-Nov-03 22:35:15 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-Nov-03 22:35:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:33 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima31.cmd' (at lines 1 - 24) 2010-Nov-03 22:35:33 INFO4 CIMA-load_command_file: Loaded command file '101103.cmd' 2010-Nov-03 22:35:35 INFO1 CIMA-run_command_file: Transferring command file '101103.cmd' to executive ... 2010-Nov-03 22:35:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_cima31.conf} 2010-Nov-03 22:35:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2010-Nov-03 22:35:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2010-Nov-03 22:35:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2010-Nov-03 22:35:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2010-Nov-03 22:35:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2010-Nov-03 22:35:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2010-Nov-03 22:35:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2010-Nov-03 22:35:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2010-Nov-03 22:35:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2010-Nov-03 22:35:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2010-Nov-03 22:35:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2010-Nov-03 22:35:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2010-Nov-03 22:35:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 28 {LOAD ages_mock.conf} 2010-Nov-03 22:35:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 29 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2010-Nov-03 22:35:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 30 {CATALOG AGESFull.cat} 2010-Nov-03 22:35:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 33 {IF LSTSLEW(AGES33PP_p3_110) < 010138 THEN} 2010-Nov-03 22:35:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 34 {FIXEDDRIFT az=203.11 alfaangle=-3.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_110 ra=12400.00 dec=295630.00} 2010-Nov-03 22:35:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 37 {ENDIF} 2010-Nov-03 22:35:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 40 {IF LSTSLEW(AGES33PP_p1_004) < 012438 THEN} 2010-Nov-03 22:35:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 41 {FIXEDDRIFT az=180.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_004 ra=12400.00 dec=323530.00} 2010-Nov-03 22:35:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 44 {ENDIF} 2010-Nov-03 22:35:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 47 {IF LSTSLEW(AGES33PP_p3_112) < 014738 THEN} 2010-Nov-03 22:35:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 48 {FIXEDDRIFT az=156.79 alfaangle=41.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_112 ra=12400.00 dec=295330.00} 2010-Nov-03 22:35:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 51 {ENDIF} 2010-Nov-03 22:35:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 26 54 {IF LSTSLEW(AGES33PP_p3_155) < 021038 THEN} 2010-Nov-03 22:35:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 27 55 {FIXEDDRIFT az=137.15 alfaangle=62.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_155 ra=12400.00 dec=284900.00} 2010-Nov-03 22:35:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 28 58 {ENDIF} 2010-Nov-03 22:35:36 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Nov-03 22:35:36 LOG4 exec_msg: From OBSERVER: run_command_file 101103.cmd 1 1 28 2010-Nov-03 22:35:36 LOG4 run_command_file: Calling 'run_command_file 101103.cmd 1 1 28' 2010-Nov-03 22:35:36 BEGIN begin_task: Starting task 'running command file '101103.cmd'' 2010-Nov-03 22:35:36 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-Nov-03 22:35:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '101103.cmd' ...} 2010-Nov-03 22:35:36 NOTE run_command_file: Starting execution of command file '101103.cmd' from line 1 2010-Nov-03 22:35:36 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_cima31.conf' 2010-Nov-03 22:35:36 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-Nov-03 22:35:36 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Nov-03 22:35:36 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-Nov-03 22:35:36 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima31.conf' 2010-Nov-03 22:35:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Nov-03 22:35:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Nov-03 22:35:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Nov-03 22:35:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Nov-03 22:35:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Nov-03 22:35:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2010-Nov-03 22:35:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Nov-03 22:35:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2010-Nov-03 22:35:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2010-Nov-03 22:35:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Nov-03 22:35:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Nov-03 22:35:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Nov-03 22:35:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Nov-03 22:35:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Nov-03 22:35:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Nov-03 22:35:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Nov-03 22:35:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Nov-03 22:35:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Nov-03 22:35:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Nov-03 22:35:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Nov-03 22:35:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Nov-03 22:35:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Nov-03 22:35:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Nov-03 22:35:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Nov-03 22:35:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Nov-03 22:35:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Nov-03 22:35:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Nov-03 22:35:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Nov-03 22:35:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Nov-03 22:35:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Nov-03 22:35:38 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Nov-03 22:35:38 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Nov-03 22:35:38 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2010-Nov-03 22:35:38 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Nov-03 22:35:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Nov-03 22:35:38 INFO1 config_iflo: Selecting receiver ALFA 2010-Nov-03 22:35:38 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2010-Nov-03 22:35:38 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2010-Nov-03 22:35:38 START begin_task: Starting task 'selecting receiver ALFA' 2010-Nov-03 22:35:38 LOG5 begin_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2010-Nov-03 22:35:38 NOTE select_receiver: Starting to select receiver ALFA 2010-Nov-03 22:35:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-Nov-03 22:35:38 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-Nov-03 22:35:38 LOG3 vw_send: To DATATAKING: acvlbical off 2010-Nov-03 22:35:38 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-Nov-03 22:35:38 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-Nov-03 22:35:38 LOG5 finish_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2010-Nov-03 22:35:38 INFO2 finish_task: DONE finished selecting: receiver ALFA 2010-Nov-03 22:35:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Nov-03 22:35:38 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-Nov-03 22:35:38 LOG5 end_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2010-Nov-03 22:35:38 START begin_task: Starting task 'waiting for receiver ALFA' 2010-Nov-03 22:35:38 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-Nov-03 22:35:38 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2010-Nov-03 22:35:38 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-Nov-03 22:35:38 INFO1 config_iflo: Configuring rest of the IF/LO path 2010-Nov-03 22:35:38 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2010-Nov-03 22:35:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Nov-03 22:35:38 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Nov-03 22:35:38 START begin_task: Starting task 'waiting on command to ALFA' 2010-Nov-03 22:35:38 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-Nov-03 22:35:38 LOG4 got_alfamon: From ALFAMON: ACK 2010-Nov-03 22:35:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Nov-03 22:35:38 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-Nov-03 22:35:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Nov-03 22:35:38 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Nov-03 22:35:38 LOG3 vw_send: To DATATAKING: alfafb 1 2010-Nov-03 22:35:38 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2010-Nov-03 22:35:38 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Nov-03 22:35:38 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Nov-03 22:35:38 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2010-Nov-03 22:35:38 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2010-Nov-03 22:35:38 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2010-Nov-03 22:35:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Nov-03 22:35:39 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2010-Nov-03 22:35:39 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2010-Nov-03 22:35:39 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Nov-03 22:35:39 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Nov-03 22:35:39 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Nov-03 22:35:39 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Nov-03 22:35:39 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Nov-03 22:35:39 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2010-Nov-03 22:35:39 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2010-Nov-03 22:35:39 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2010-Nov-03 22:35:39 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2010-Nov-03 22:35:39 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-Nov-03 22:35:39 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2010-Nov-03 22:35:39 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-Nov-03 22:35:39 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Nov-03 22:35:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 22:35:39 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Nov-03 22:35:39 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2010-Nov-03 22:35:39 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Nov-03 22:35:39 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2010-Nov-03 22:35:39 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2010-Nov-03 22:35:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Nov-03 22:35:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:35:39 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Nov-03 22:35:39 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2010-Nov-03 22:35:39 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-Nov-03 22:35:39 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-Nov-03 22:35:39 LOG4 got_cormsg: From DATATAKING: alfafb 1 2010-Nov-03 22:35:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2010-Nov-03 22:35:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2010-Nov-03 22:35:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2010-Nov-03 22:35:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2010-Nov-03 22:35:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Nov-03 22:35:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2010-Nov-03 22:35:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2010-Nov-03 22:35:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2010-Nov-03 22:35:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2010-Nov-03 22:35:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2010-Nov-03 22:35:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2010-Nov-03 22:35:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-Nov-03 22:35:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2010-Nov-03 22:35:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-Nov-03 22:35:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 22:35:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Nov-03 22:35:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2010-Nov-03 22:35:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2010-Nov-03 22:35:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2010-Nov-03 22:35:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:35:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:54 LOG4 got_cormsg: From DATATAKING: DONE 2010-Nov-03 22:35:54 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Nov-03 22:35:54 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2010-Nov-03 22:35:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Nov-03 22:35:54 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Nov-03 22:35:54 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2010-Nov-03 22:35:54 DONE finish_task: DONE finished configuration: IF/LO path 2010-Nov-03 22:35:54 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 22:35:54 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Nov-03 22:35:54 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2010-Nov-03 22:35:54 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Nov-03 22:35:54 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2010-Nov-03 22:35:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Nov-03 22:35:54 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Nov-03 22:35:55 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Nov-03 22:35:55 START begin_task: Starting task 'selecting calibration port' 2010-Nov-03 22:35:55 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2010-Nov-03 22:35:55 LOG3 vw_send: To DATATAKING: calport 3 2010-Nov-03 22:35:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Nov-03 22:35:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:35:55 START begin_task: Starting task 'waiting on calport' 2010-Nov-03 22:35:55 LOG5 begin_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2010-Nov-03 22:35:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:55 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Nov-03 22:35:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:35:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:55 LOG4 got_cormsg: From DATATAKING: DONE 2010-Nov-03 22:35:55 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Nov-03 22:35:55 LOG5 end_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2010-Nov-03 22:35:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Nov-03 22:35:55 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Nov-03 22:35:55 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2010-Nov-03 22:35:55 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Nov-03 22:35:55 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Nov-03 22:35:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Nov-03 22:35:55 LOG5 begin_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2010-Nov-03 22:35:55 LOG3 CALCONTROL-caltrig: Software trigger 2010-Nov-03 22:35:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Nov-03 22:35:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Nov-03 22:35:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Nov-03 22:35:55 LOG5 end_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2010-Nov-03 22:35:55 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Nov-03 22:35:55 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Nov-03 22:35:55 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Nov-03 22:35:55 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Nov-03 22:35:55 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Nov-03 22:35:55 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Nov-03 22:35:55 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Nov-03 22:35:55 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Nov-03 22:35:55 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 J. Hernandez 2010-Nov-03 22:35:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 J. Hernandez 2010-Nov-03 22:35:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 J. Hernandez 2010-Nov-03 22:35:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 J. Hernandez 2010-Nov-03 22:35:55 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Nov-03 22:35:55 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Nov-03 22:35:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Nov-03 22:35:55 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2010-Nov-03 22:35:55 LOG3 CALCONTROL-caltrig: Software trigger 2010-Nov-03 22:35:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Nov-03 22:35:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Nov-03 22:35:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Nov-03 22:35:55 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2010-Nov-03 22:35:55 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 J. Hernandez 2010-Nov-03 22:35:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 J. Hernandez 2010-Nov-03 22:35:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 J. Hernandez 2010-Nov-03 22:35:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 J. Hernandez 2010-Nov-03 22:35:55 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Nov-03 22:35:55 LOG5 finish_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2010-Nov-03 22:35:55 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Nov-03 22:35:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 22:35:56 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Nov-03 22:35:56 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2010-Nov-03 22:35:56 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2010-Nov-03 22:35:56 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2010-Nov-03 22:35:56 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2010-Nov-03 22:35:56 LOG3 is_if_valid: Current source data: down 454.3 33.6 1213 - - 1378 4.1 2010-Nov-03 22:35:56 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2010-Nov-03 22:35:56 INFO5 is_if_valid: Condition parsed as: 0 2010-Nov-03 22:35:56 INFO1 is_if_valid: Skipping line 'IF isup(galfasrc) then' 2010-Nov-03 22:35:56 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2010-Nov-03 22:35:56 INFO1 run_command_line: Skipping line 'GOTO galfasrc' in non-true conditional branch 2010-Nov-03 22:35:56 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2010-Nov-03 22:35:56 LOG3 is_if_valid: Current source data: up 552.6 12.7 UP - - 80 0.0 2010-Nov-03 22:35:56 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc2) 2010-Nov-03 22:35:56 INFO5 is_if_valid: Condition parsed as: 1 2010-Nov-03 22:35:56 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2010-Nov-03 22:35:56 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc2 nooffset nowait' 2010-Nov-03 22:35:56 BEGIN begin_task: Starting task 'tracking source 'galfasrc2'' 2010-Nov-03 22:35:56 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2010-Nov-03 22:35:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc2' ...} 2010-Nov-03 22:35:56 LOG3 track_source: Calling 'track_source galfasrc2 011400.0 +304000 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2010-Nov-03 22:35:56 START begin_task: Starting task 'sending tracking commands' 2010-Nov-03 22:35:56 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2010-Nov-03 22:35:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc2} INFO {Slewing to source 'galfasrc2' ...} 2010-Nov-03 22:35:56 INFO1 track_source: Starting to track galfasrc2 2010-Nov-03 22:35:56 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc2" 2010-Nov-03 22:35:56 LOG3 vw_send: To DATATAKING: set ra 011400.0 2010-Nov-03 22:35:56 LOG3 vw_send: To DATATAKING: set dec +304000 2010-Nov-03 22:35:56 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Nov-03 22:35:56 LOG3 vw_send: To DATATAKING: pnt tr 011400.0 +304000 -CJ 2010-Nov-03 22:35:56 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Nov-03 22:35:56 STOP finish_task: Finishing task 'sending tracking commands' 2010-Nov-03 22:35:56 LOG5 finish_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2010-Nov-03 22:35:56 INFO2 finish_task: DONE finished sending: tracking commands 2010-Nov-03 22:35:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Nov-03 22:35:56 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Nov-03 22:35:56 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2010-Nov-03 22:35:56 STOP finish_task: Finishing task 'tracking source 'galfasrc2'' 2010-Nov-03 22:35:56 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2010-Nov-03 22:35:56 DONE finish_task: DONE finished tracking: source 'galfasrc2' 2010-Nov-03 22:35:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 22:35:57 END end_task: Finishing task 'tracking source 'galfasrc2'' with status 'OK' 2010-Nov-03 22:35:57 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2010-Nov-03 22:35:57 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2010-Nov-03 22:35:57 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2010-Nov-03 22:35:57 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2010-Nov-03 22:35:57 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2010-Nov-03 22:35:57 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2010-Nov-03 22:35:57 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2010-Nov-03 22:35:57 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2010-Nov-03 22:35:57 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2010-Nov-03 22:35:57 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2010-Nov-03 22:35:57 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Nov-03 22:35:57 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2010-Nov-03 22:35:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Nov-03 22:35:57 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Nov-03 22:35:57 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2010-Nov-03 22:35:57 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Nov-03 22:35:57 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Nov-03 22:35:57 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-Nov-03 22:35:57 NOTE WAPPDATA-new_file: New FITS file: wapp.20101103.a2048.0001.fits 2010-Nov-03 22:35:57 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 J. Hernandez' 2010-Nov-03 22:35:57 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc2" 2010-Nov-03 22:35:57 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Nov-03 22:35:57 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Nov-03 22:35:57 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20101103.a2048.0001.fits} 2010-Nov-03 22:35:57 LOG4 got_cormsg: From DATATAKING: set ra 011400.0 2010-Nov-03 22:35:57 LOG4 got_cormsg: From DATATAKING: set dec +304000 2010-Nov-03 22:35:57 LOG4 got_cormsg: From DATATAKING: vw% 011400.0 2010-Nov-03 22:35:57 LOG4 got_cormsg: From DATATAKING: vw% +304000 2010-Nov-03 22:35:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:57 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Nov-03 22:35:57 LOG4 got_cormsg: From DATATAKING: pnt tr 011400.0 +304000 -CJ 2010-Nov-03 22:35:57 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Nov-03 22:35:57 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Nov-03 22:35:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:35:57 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 J. Hernandez' 2010-Nov-03 22:38:27 ERROR end_wait_seconds: ERROR timed out while waiting for ALFA rotation! 2010-Nov-03 22:38:27 LOG1 task_failed: Task 'waiting on ALFA rotation' failed! 2010-Nov-03 22:38:27 LOG5 task_failed: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-Nov-03 22:38:27 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'FAILED' 2010-Nov-03 22:38:27 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 1 failed 2010-Nov-03 22:38:27 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Nov-03 22:38:27 ALERT rotate_alfa: Current ALFA angle is +62.1 degrees! 2010-Nov-03 22:38:27 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Nov-03 22:38:27 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 1 failed 2010-Nov-03 22:38:27 ERROR finish_task: ERROR failed configuration: rotating ALFA to +19 degrees 2010-Nov-03 22:38:27 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Nov-03 22:38:27 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'FAILED' 2010-Nov-03 22:38:27 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 1 failed 2010-Nov-03 22:38:27 ALERT run_command_file: Stopping command file processing at line 15! 2010-Nov-03 22:38:27 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Nov-03 22:38:27 STOP finish_task: Finishing task 'running command file '101103.cmd'' 2010-Nov-03 22:38:27 LOG5 finish_task: Level: (1) ID = <10002> Status = 0 0 0 1 failed 2010-Nov-03 22:38:27 ERROR finish_task: ERROR failed running: command file '101103.cmd' 2010-Nov-03 22:38:27 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Nov-03 22:38:27 END end_task: Finishing task 'running command file '101103.cmd'' with status 'FAILED' 2010-Nov-03 22:38:27 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 1 failed 2010-Nov-03 22:40:11 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima31.cmd' (at lines 1 - 24) 2010-Nov-03 22:40:11 INFO4 CIMA-load_command_file: Loaded command file '101103.cmd' 2010-Nov-03 22:40:13 INFO1 CIMA-run_command_file: Transferring command file '101103.cmd' to executive ... 2010-Nov-03 22:40:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_cima31.conf} 2010-Nov-03 22:40:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2010-Nov-03 22:40:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2010-Nov-03 22:40:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2010-Nov-03 22:40:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2010-Nov-03 22:40:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2010-Nov-03 22:40:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2010-Nov-03 22:40:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2010-Nov-03 22:40:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2010-Nov-03 22:40:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2010-Nov-03 22:40:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2010-Nov-03 22:40:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2010-Nov-03 22:40:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2010-Nov-03 22:40:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 28 {LOAD ages_mock.conf} 2010-Nov-03 22:40:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 29 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2010-Nov-03 22:40:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 30 {CATALOG AGESFull.cat} 2010-Nov-03 22:40:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 33 {IF LSTSLEW(AGES33PP_p3_110) < 010138 THEN} 2010-Nov-03 22:40:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 34 {FIXEDDRIFT az=203.11 alfaangle=-3.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_110 ra=12400.00 dec=295630.00} 2010-Nov-03 22:40:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 37 {ENDIF} 2010-Nov-03 22:40:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 40 {IF LSTSLEW(AGES33PP_p1_004) < 012438 THEN} 2010-Nov-03 22:40:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 41 {FIXEDDRIFT az=180.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_004 ra=12400.00 dec=323530.00} 2010-Nov-03 22:40:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 44 {ENDIF} 2010-Nov-03 22:40:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 47 {IF LSTSLEW(AGES33PP_p3_112) < 014738 THEN} 2010-Nov-03 22:40:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 48 {FIXEDDRIFT az=156.79 alfaangle=41.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_112 ra=12400.00 dec=295330.00} 2010-Nov-03 22:40:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 51 {ENDIF} 2010-Nov-03 22:40:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 26 54 {IF LSTSLEW(AGES33PP_p3_155) < 021038 THEN} 2010-Nov-03 22:40:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 27 55 {FIXEDDRIFT az=137.15 alfaangle=62.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_155 ra=12400.00 dec=284900.00} 2010-Nov-03 22:40:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 28 58 {ENDIF} 2010-Nov-03 22:40:14 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Nov-03 22:40:14 LOG4 exec_msg: From OBSERVER: run_command_file 101103.cmd 1 1 28 2010-Nov-03 22:40:14 LOG4 run_command_file: Calling 'run_command_file 101103.cmd 1 1 28' 2010-Nov-03 22:40:14 BEGIN begin_task: Starting task 'running command file '101103.cmd'' 2010-Nov-03 22:40:14 LOG5 begin_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2010-Nov-03 22:40:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '101103.cmd' ...} 2010-Nov-03 22:40:14 NOTE run_command_file: Starting execution of command file '101103.cmd' from line 1 2010-Nov-03 22:40:14 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_cima31.conf' 2010-Nov-03 22:40:14 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-Nov-03 22:40:14 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Nov-03 22:40:14 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-Nov-03 22:40:14 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima31.conf' 2010-Nov-03 22:40:14 LOG2 CIMA-antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84311 J 2010-Nov-03 22:40:14 LOG2 CIMA-antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 22:40:14 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 96013 2010 307 0.0 2010-Nov-03 22:40:14 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 22:40:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Nov-03 22:40:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Nov-03 22:40:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Nov-03 22:40:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Nov-03 22:40:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Nov-03 22:40:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2010-Nov-03 22:40:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Nov-03 22:40:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2010-Nov-03 22:40:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2010-Nov-03 22:40:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2010-Nov-03 22:40:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2010-Nov-03 22:40:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2010-Nov-03 22:40:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Nov-03 22:40:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Nov-03 22:40:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Nov-03 22:40:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Nov-03 22:40:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Nov-03 22:40:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Nov-03 22:40:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Nov-03 22:40:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Nov-03 22:40:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Nov-03 22:40:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Nov-03 22:40:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Nov-03 22:40:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Nov-03 22:40:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Nov-03 22:40:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Nov-03 22:40:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Nov-03 22:40:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Nov-03 22:40:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Nov-03 22:40:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Nov-03 22:40:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Nov-03 22:40:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Nov-03 22:40:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Nov-03 22:40:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Nov-03 22:40:16 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Nov-03 22:40:16 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Nov-03 22:40:16 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2010-Nov-03 22:40:16 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Nov-03 22:40:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Nov-03 22:40:16 LOG1 config_iflo: Receiver ALFA already selected 2010-Nov-03 22:40:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Nov-03 22:40:16 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Nov-03 22:40:16 START begin_task: Starting task 'waiting on command to ALFA' 2010-Nov-03 22:40:16 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2010-Nov-03 22:40:16 LOG4 got_alfamon: From ALFAMON: ACK 2010-Nov-03 22:40:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Nov-03 22:40:16 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2010-Nov-03 22:40:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Nov-03 22:40:16 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Nov-03 22:40:16 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2010-Nov-03 22:40:16 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2010-Nov-03 22:40:16 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Nov-03 22:40:16 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Nov-03 22:40:16 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2010-Nov-03 22:40:16 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2010-Nov-03 22:40:16 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2010-Nov-03 22:40:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Nov-03 22:40:16 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2010-Nov-03 22:40:16 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2010-Nov-03 22:40:16 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Nov-03 22:40:16 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Nov-03 22:40:16 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Nov-03 22:40:16 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Nov-03 22:40:16 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Nov-03 22:40:16 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2010-Nov-03 22:40:16 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2010-Nov-03 22:40:16 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2010-Nov-03 22:40:16 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2010-Nov-03 22:40:16 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2010-Nov-03 22:40:16 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2010-Nov-03 22:40:16 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2010-Nov-03 22:40:16 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Nov-03 22:40:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 22:40:16 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2010-Nov-03 22:40:16 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2010-Nov-03 22:40:16 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Nov-03 22:40:16 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2010-Nov-03 22:40:16 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2010-Nov-03 22:40:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Nov-03 22:40:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:40:16 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Nov-03 22:40:16 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Nov-03 22:40:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Nov-03 22:40:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 22:40:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:40:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:40:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:40:16 LOG4 got_cormsg: From DATATAKING: DONE 2010-Nov-03 22:40:16 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Nov-03 22:40:16 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Nov-03 22:40:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Nov-03 22:40:16 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Nov-03 22:40:16 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2010-Nov-03 22:40:16 DONE finish_task: DONE finished configuration: IF/LO path 2010-Nov-03 22:40:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 22:40:17 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Nov-03 22:40:17 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2010-Nov-03 22:40:17 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Nov-03 22:40:17 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2010-Nov-03 22:40:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Nov-03 22:40:17 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Nov-03 22:40:17 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Nov-03 22:40:17 START begin_task: Starting task 'selecting calibration port' 2010-Nov-03 22:40:17 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2010-Nov-03 22:40:17 LOG3 vw_send: To DATATAKING: calport 3 2010-Nov-03 22:40:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Nov-03 22:40:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:40:17 START begin_task: Starting task 'waiting on calport' 2010-Nov-03 22:40:17 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2010-Nov-03 22:40:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:40:17 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Nov-03 22:40:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:40:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:40:17 LOG4 got_cormsg: From DATATAKING: DONE 2010-Nov-03 22:40:17 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Nov-03 22:40:17 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2010-Nov-03 22:40:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Nov-03 22:40:17 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Nov-03 22:40:17 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2010-Nov-03 22:40:17 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Nov-03 22:40:17 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Nov-03 22:40:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Nov-03 22:40:17 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2010-Nov-03 22:40:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:40:17 LOG3 CALCONTROL-caltrig: Software trigger 2010-Nov-03 22:40:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Nov-03 22:40:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Nov-03 22:40:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Nov-03 22:40:17 LOG5 end_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2010-Nov-03 22:40:17 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Nov-03 22:40:17 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Nov-03 22:40:17 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Nov-03 22:40:17 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Nov-03 22:40:17 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Nov-03 22:40:17 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Nov-03 22:40:17 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Nov-03 22:40:17 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Nov-03 22:40:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 J. Hernandez 2010-Nov-03 22:40:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 J. Hernandez 2010-Nov-03 22:40:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 J. Hernandez 2010-Nov-03 22:40:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 J. Hernandez 2010-Nov-03 22:40:17 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Nov-03 22:40:17 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Nov-03 22:40:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Nov-03 22:40:17 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2010-Nov-03 22:40:17 LOG3 CALCONTROL-caltrig: Software trigger 2010-Nov-03 22:40:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Nov-03 22:40:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Nov-03 22:40:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Nov-03 22:40:17 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2010-Nov-03 22:40:17 LOG3 sock_errsend: To WAPPDATA: FLUSH 2010-Nov-03 22:40:18 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Nov-03 22:40:18 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2010-Nov-03 22:40:18 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Nov-03 22:40:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 22:40:18 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Nov-03 22:40:18 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2010-Nov-03 22:40:18 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2010-Nov-03 22:40:18 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2010-Nov-03 22:40:18 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2010-Nov-03 22:40:18 LOG3 is_if_valid: Current source data: down 454.5 34.6 1208 - - 1373 3.9 2010-Nov-03 22:40:18 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2010-Nov-03 22:40:18 INFO5 is_if_valid: Condition parsed as: 0 2010-Nov-03 22:40:18 INFO1 is_if_valid: Skipping line 'IF isup(galfasrc) then' 2010-Nov-03 22:40:18 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2010-Nov-03 22:40:18 INFO1 run_command_line: Skipping line 'GOTO galfasrc' in non-true conditional branch 2010-Nov-03 22:40:18 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2010-Nov-03 22:40:18 LOG3 is_if_valid: Current source data: up 548.3 12.5 UP - - 76 0.0 2010-Nov-03 22:40:18 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc2) 2010-Nov-03 22:40:18 INFO5 is_if_valid: Condition parsed as: 1 2010-Nov-03 22:40:18 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2010-Nov-03 22:40:18 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc2 nooffset nowait' 2010-Nov-03 22:40:18 BEGIN begin_task: Starting task 'tracking source 'galfasrc2'' 2010-Nov-03 22:40:18 LOG5 begin_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2010-Nov-03 22:40:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc2' ...} 2010-Nov-03 22:40:18 LOG3 track_source: Calling 'track_source galfasrc2 011400.0 +304000 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2010-Nov-03 22:40:18 START begin_task: Starting task 'sending tracking commands' 2010-Nov-03 22:40:18 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Nov-03 22:40:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc2} INFO {Slewing to source 'galfasrc2' ...} 2010-Nov-03 22:40:18 INFO1 track_source: Starting to track galfasrc2 2010-Nov-03 22:40:18 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc2" 2010-Nov-03 22:40:18 LOG3 vw_send: To DATATAKING: set ra 011400.0 2010-Nov-03 22:40:18 LOG3 vw_send: To DATATAKING: set dec +304000 2010-Nov-03 22:40:18 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Nov-03 22:40:18 LOG3 vw_send: To DATATAKING: pnt tr 011400.0 +304000 -CJ 2010-Nov-03 22:40:18 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Nov-03 22:40:18 STOP finish_task: Finishing task 'sending tracking commands' 2010-Nov-03 22:40:18 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Nov-03 22:40:18 INFO2 finish_task: DONE finished sending: tracking commands 2010-Nov-03 22:40:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Nov-03 22:40:18 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Nov-03 22:40:18 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Nov-03 22:40:18 STOP finish_task: Finishing task 'tracking source 'galfasrc2'' 2010-Nov-03 22:40:18 LOG5 finish_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2010-Nov-03 22:40:18 DONE finish_task: DONE finished tracking: source 'galfasrc2' 2010-Nov-03 22:40:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 22:40:18 END end_task: Finishing task 'tracking source 'galfasrc2'' with status 'OK' 2010-Nov-03 22:40:19 LOG5 end_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2010-Nov-03 22:40:19 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2010-Nov-03 22:40:19 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2010-Nov-03 22:40:19 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2010-Nov-03 22:40:19 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2010-Nov-03 22:40:19 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2010-Nov-03 22:40:19 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2010-Nov-03 22:40:19 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2010-Nov-03 22:40:19 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2010-Nov-03 22:40:19 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2010-Nov-03 22:40:19 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Nov-03 22:40:19 LOG5 begin_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2010-Nov-03 22:40:19 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Nov-03 22:40:19 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Nov-03 22:40:19 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2010-Nov-03 22:40:19 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Nov-03 22:40:19 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Nov-03 22:40:19 LOG5 begin_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2010-Nov-03 22:40:19 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Nov-03 22:40:19 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc2" 2010-Nov-03 22:40:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Nov-03 22:40:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Nov-03 22:40:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 J. Hernandez' 2010-Nov-03 22:40:19 LOG4 got_cormsg: From DATATAKING: set ra 011400.0 2010-Nov-03 22:40:19 LOG4 got_cormsg: From DATATAKING: set dec +304000 2010-Nov-03 22:40:19 LOG4 got_cormsg: From DATATAKING: vw% 011400.0 2010-Nov-03 22:40:19 LOG4 got_cormsg: From DATATAKING: vw% +304000 2010-Nov-03 22:40:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:40:19 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Nov-03 22:40:19 LOG4 got_cormsg: From DATATAKING: pnt tr 011400.0 +304000 -CJ 2010-Nov-03 22:40:19 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Nov-03 22:40:19 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Nov-03 22:40:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:40:26 COMMAND CIMA-send_to_exec: Sending command to stop observation 2010-Nov-03 22:40:26 LOG4 exec_msg: From OBSERVER: stop_task 2010-Nov-03 22:40:26 WARNING stop_task: WARNING stop at end of current loop/command requested! 2010-Nov-03 22:40:29 COMMAND CIMA-send_to_exec: Sending command to abort observation 2010-Nov-03 22:40:29 LOG4 exec_msg: From OBSERVER: abort_task abort 2010-Nov-03 22:40:29 WARNING abort_task: WARNING abort requested! 2010-Nov-03 22:40:29 WARNING abort_task: WARNING Aborting wait for waiting on ALFA rotation 2010-Nov-03 22:40:29 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'ABORT' 2010-Nov-03 22:40:29 LOG5 end_task: Level: (3) ID = <10029> Status = 1 0 1 0 abort 2010-Nov-03 22:40:29 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Nov-03 22:40:29 ALERT rotate_alfa: Current ALFA angle is +62.1 degrees! 2010-Nov-03 22:40:29 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Nov-03 22:40:29 LOG5 finish_task: Level: (2) ID = <10028> Status = 1 0 1 0 abort 2010-Nov-03 22:40:29 WARNING finish_task: WARNING aborted configuration: rotating ALFA to +19 degrees 2010-Nov-03 22:40:29 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2010-Nov-03 22:40:29 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'ABORT' 2010-Nov-03 22:40:29 LOG5 end_task: Level: (2) ID = <10028> Status = 1 0 1 0 abort 2010-Nov-03 22:40:29 ALERT run_command_file: Stopping command file processing at line 15! 2010-Nov-03 22:40:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Nov-03 22:40:29 STOP finish_task: Finishing task 'running command file '101103.cmd'' 2010-Nov-03 22:40:29 LOG5 finish_task: Level: (1) ID = <10017> Status = 1 0 1 0 abort 2010-Nov-03 22:40:29 WARNING finish_task: WARNING aborted running: command file '101103.cmd' 2010-Nov-03 22:40:29 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2010-Nov-03 22:40:29 END end_task: Finishing task 'running command file '101103.cmd'' with status 'ABORT' 2010-Nov-03 22:40:29 LOG5 end_task: Level: (1) ID = <10017> Status = 1 0 1 0 abort 2010-Nov-03 22:40:39 COMMAND CIMA-send_to_exec: Sending command to stop observation 2010-Nov-03 22:40:39 LOG4 exec_msg: From OBSERVER: stop_task 2010-Nov-03 22:40:39 WARNING stop_task: WARNING stop at end of current loop/command requested! 2010-Nov-03 22:41:13 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima31.cmd' (at lines 1 - 24) 2010-Nov-03 22:41:13 INFO4 CIMA-load_command_file: Loaded command file '101103.cmd' 2010-Nov-03 22:41:15 INFO1 CIMA-run_command_file: Transferring command file '101103.cmd' to executive ... 2010-Nov-03 22:41:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_cima31.conf} 2010-Nov-03 22:41:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2010-Nov-03 22:41:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2010-Nov-03 22:41:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2010-Nov-03 22:41:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2010-Nov-03 22:41:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2010-Nov-03 22:41:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2010-Nov-03 22:41:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2010-Nov-03 22:41:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2010-Nov-03 22:41:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2010-Nov-03 22:41:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2010-Nov-03 22:41:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2010-Nov-03 22:41:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2010-Nov-03 22:41:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 28 {LOAD ages_mock.conf} 2010-Nov-03 22:41:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 29 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2010-Nov-03 22:41:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 30 {CATALOG AGESFull.cat} 2010-Nov-03 22:41:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 33 {IF LSTSLEW(AGES33PP_p3_110) < 010138 THEN} 2010-Nov-03 22:41:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 34 {FIXEDDRIFT az=203.11 alfaangle=-3.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_110 ra=12400.00 dec=295630.00} 2010-Nov-03 22:41:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 37 {ENDIF} 2010-Nov-03 22:41:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 40 {IF LSTSLEW(AGES33PP_p1_004) < 012438 THEN} 2010-Nov-03 22:41:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 41 {FIXEDDRIFT az=180.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_004 ra=12400.00 dec=323530.00} 2010-Nov-03 22:41:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 44 {ENDIF} 2010-Nov-03 22:41:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 47 {IF LSTSLEW(AGES33PP_p3_112) < 014738 THEN} 2010-Nov-03 22:41:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 48 {FIXEDDRIFT az=156.79 alfaangle=41.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_112 ra=12400.00 dec=295330.00} 2010-Nov-03 22:41:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 51 {ENDIF} 2010-Nov-03 22:41:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 26 54 {IF LSTSLEW(AGES33PP_p3_155) < 021038 THEN} 2010-Nov-03 22:41:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 27 55 {FIXEDDRIFT az=137.15 alfaangle=62.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_155 ra=12400.00 dec=284900.00} 2010-Nov-03 22:41:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 28 58 {ENDIF} 2010-Nov-03 22:41:15 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Nov-03 22:41:15 LOG4 exec_msg: From OBSERVER: run_command_file 101103.cmd 1 1 28 2010-Nov-03 22:41:15 LOG4 run_command_file: Calling 'run_command_file 101103.cmd 1 1 28' 2010-Nov-03 22:41:15 BEGIN begin_task: Starting task 'running command file '101103.cmd'' 2010-Nov-03 22:41:15 LOG5 begin_task: Level: (1) ID = <10030> Status = 0 0 0 0 ok 2010-Nov-03 22:41:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '101103.cmd' ...} 2010-Nov-03 22:41:15 NOTE run_command_file: Starting execution of command file '101103.cmd' from line 1 2010-Nov-03 22:41:15 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_cima31.conf' 2010-Nov-03 22:41:16 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-Nov-03 22:41:16 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Nov-03 22:41:16 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-Nov-03 22:41:16 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima31.conf' 2010-Nov-03 22:41:16 LOG2 CIMA-antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84311 J 2010-Nov-03 22:41:16 LOG2 CIMA-antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 22:41:16 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 96075 2010 307 0.0 2010-Nov-03 22:41:16 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 22:41:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Nov-03 22:41:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Nov-03 22:41:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Nov-03 22:41:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Nov-03 22:41:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Nov-03 22:41:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2010-Nov-03 22:41:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Nov-03 22:41:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2010-Nov-03 22:41:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2010-Nov-03 22:41:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2010-Nov-03 22:41:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2010-Nov-03 22:41:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2010-Nov-03 22:41:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2010-Nov-03 22:41:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2010-Nov-03 22:41:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2010-Nov-03 22:41:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2010-Nov-03 22:41:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Nov-03 22:41:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Nov-03 22:41:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Nov-03 22:41:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Nov-03 22:41:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Nov-03 22:41:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Nov-03 22:41:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Nov-03 22:41:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Nov-03 22:41:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Nov-03 22:41:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Nov-03 22:41:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Nov-03 22:41:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Nov-03 22:41:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Nov-03 22:41:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Nov-03 22:41:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Nov-03 22:41:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Nov-03 22:41:18 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Nov-03 22:41:18 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Nov-03 22:41:18 LOG5 begin_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2010-Nov-03 22:41:18 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Nov-03 22:41:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Nov-03 22:41:18 LOG1 config_iflo: Receiver ALFA already selected 2010-Nov-03 22:41:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Nov-03 22:41:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Nov-03 22:41:18 START begin_task: Starting task 'waiting on command to ALFA' 2010-Nov-03 22:41:18 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2010-Nov-03 22:41:18 LOG4 got_alfamon: From ALFAMON: ACK 2010-Nov-03 22:41:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Nov-03 22:41:18 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2010-Nov-03 22:41:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Nov-03 22:41:18 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Nov-03 22:41:18 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2010-Nov-03 22:41:18 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2010-Nov-03 22:41:18 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Nov-03 22:41:18 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Nov-03 22:41:18 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2010-Nov-03 22:41:18 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2010-Nov-03 22:41:18 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2010-Nov-03 22:41:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Nov-03 22:41:18 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2010-Nov-03 22:41:18 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2010-Nov-03 22:41:18 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Nov-03 22:41:18 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Nov-03 22:41:18 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Nov-03 22:41:18 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Nov-03 22:41:18 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Nov-03 22:41:18 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2010-Nov-03 22:41:18 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2010-Nov-03 22:41:18 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2010-Nov-03 22:41:18 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2010-Nov-03 22:41:18 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2010-Nov-03 22:41:18 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2010-Nov-03 22:41:18 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2010-Nov-03 22:41:18 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Nov-03 22:41:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 22:41:18 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2010-Nov-03 22:41:18 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2010-Nov-03 22:41:18 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Nov-03 22:41:18 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2010-Nov-03 22:41:18 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2010-Nov-03 22:41:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Nov-03 22:41:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:41:18 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Nov-03 22:41:18 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2010-Nov-03 22:41:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Nov-03 22:41:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 22:41:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:41:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:41:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:41:18 LOG4 got_cormsg: From DATATAKING: DONE 2010-Nov-03 22:41:18 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Nov-03 22:41:18 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2010-Nov-03 22:41:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Nov-03 22:41:18 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Nov-03 22:41:18 LOG5 finish_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2010-Nov-03 22:41:18 DONE finish_task: DONE finished configuration: IF/LO path 2010-Nov-03 22:41:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 22:41:18 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Nov-03 22:41:18 LOG5 end_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2010-Nov-03 22:41:18 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Nov-03 22:41:18 LOG5 begin_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2010-Nov-03 22:41:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Nov-03 22:41:18 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Nov-03 22:41:18 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Nov-03 22:41:18 START begin_task: Starting task 'selecting calibration port' 2010-Nov-03 22:41:18 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-Nov-03 22:41:18 LOG3 vw_send: To DATATAKING: calport 3 2010-Nov-03 22:41:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Nov-03 22:41:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:41:19 START begin_task: Starting task 'waiting on calport' 2010-Nov-03 22:41:19 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2010-Nov-03 22:41:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:41:19 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Nov-03 22:41:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:41:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:41:19 LOG4 got_cormsg: From DATATAKING: DONE 2010-Nov-03 22:41:19 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Nov-03 22:41:19 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2010-Nov-03 22:41:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Nov-03 22:41:19 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Nov-03 22:41:19 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-Nov-03 22:41:19 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Nov-03 22:41:19 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Nov-03 22:41:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Nov-03 22:41:19 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2010-Nov-03 22:41:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:41:19 LOG3 CALCONTROL-caltrig: Software trigger 2010-Nov-03 22:41:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Nov-03 22:41:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Nov-03 22:41:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Nov-03 22:41:19 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2010-Nov-03 22:41:19 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Nov-03 22:41:19 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Nov-03 22:41:19 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Nov-03 22:41:19 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Nov-03 22:41:19 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Nov-03 22:41:19 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Nov-03 22:41:19 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Nov-03 22:41:19 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Nov-03 22:41:19 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 J. Hernandez 2010-Nov-03 22:41:19 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 J. Hernandez 2010-Nov-03 22:41:19 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 J. Hernandez 2010-Nov-03 22:41:19 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 J. Hernandez 2010-Nov-03 22:41:19 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Nov-03 22:41:19 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Nov-03 22:41:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Nov-03 22:41:19 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2010-Nov-03 22:41:19 LOG3 CALCONTROL-caltrig: Software trigger 2010-Nov-03 22:41:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Nov-03 22:41:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Nov-03 22:41:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Nov-03 22:41:19 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2010-Nov-03 22:41:19 LOG3 sock_errsend: To WAPPDATA: FLUSH 2010-Nov-03 22:41:19 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Nov-03 22:41:19 LOG5 finish_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2010-Nov-03 22:41:19 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Nov-03 22:41:19 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 22:41:19 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Nov-03 22:41:19 LOG5 end_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2010-Nov-03 22:41:19 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2010-Nov-03 22:41:20 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2010-Nov-03 22:41:20 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2010-Nov-03 22:41:20 LOG3 is_if_valid: Current source data: down 454.6 34.8 1207 - - 1372 3.9 2010-Nov-03 22:41:20 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2010-Nov-03 22:41:20 INFO5 is_if_valid: Condition parsed as: 0 2010-Nov-03 22:41:20 INFO1 is_if_valid: Skipping line 'IF isup(galfasrc) then' 2010-Nov-03 22:41:20 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2010-Nov-03 22:41:20 INFO1 run_command_line: Skipping line 'GOTO galfasrc' in non-true conditional branch 2010-Nov-03 22:41:20 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2010-Nov-03 22:41:20 LOG3 is_if_valid: Current source data: up 547.3 12.5 UP - - 75 0.0 2010-Nov-03 22:41:20 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc2) 2010-Nov-03 22:41:20 INFO5 is_if_valid: Condition parsed as: 1 2010-Nov-03 22:41:20 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2010-Nov-03 22:41:20 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc2 nooffset nowait' 2010-Nov-03 22:41:20 BEGIN begin_task: Starting task 'tracking source 'galfasrc2'' 2010-Nov-03 22:41:20 LOG5 begin_task: Level: (2) ID = <10039> Status = 0 0 0 0 ok 2010-Nov-03 22:41:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc2' ...} 2010-Nov-03 22:41:20 LOG3 track_source: Calling 'track_source galfasrc2 011400.0 +304000 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2010-Nov-03 22:41:20 START begin_task: Starting task 'sending tracking commands' 2010-Nov-03 22:41:20 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2010-Nov-03 22:41:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc2} INFO {Slewing to source 'galfasrc2' ...} 2010-Nov-03 22:41:20 INFO1 track_source: Starting to track galfasrc2 2010-Nov-03 22:41:20 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc2" 2010-Nov-03 22:41:20 LOG3 vw_send: To DATATAKING: set ra 011400.0 2010-Nov-03 22:41:20 LOG3 vw_send: To DATATAKING: set dec +304000 2010-Nov-03 22:41:20 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Nov-03 22:41:20 LOG3 vw_send: To DATATAKING: pnt tr 011400.0 +304000 -CJ 2010-Nov-03 22:41:20 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Nov-03 22:41:20 STOP finish_task: Finishing task 'sending tracking commands' 2010-Nov-03 22:41:20 LOG5 finish_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2010-Nov-03 22:41:20 INFO2 finish_task: DONE finished sending: tracking commands 2010-Nov-03 22:41:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Nov-03 22:41:20 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Nov-03 22:41:20 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2010-Nov-03 22:41:20 STOP finish_task: Finishing task 'tracking source 'galfasrc2'' 2010-Nov-03 22:41:20 LOG5 finish_task: Level: (2) ID = <10039> Status = 0 0 0 0 ok 2010-Nov-03 22:41:20 DONE finish_task: DONE finished tracking: source 'galfasrc2' 2010-Nov-03 22:41:20 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 22:41:20 END end_task: Finishing task 'tracking source 'galfasrc2'' with status 'OK' 2010-Nov-03 22:41:20 LOG5 end_task: Level: (2) ID = <10039> Status = 0 0 0 0 ok 2010-Nov-03 22:41:20 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2010-Nov-03 22:41:20 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2010-Nov-03 22:41:20 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2010-Nov-03 22:41:20 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2010-Nov-03 22:41:21 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2010-Nov-03 22:41:21 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2010-Nov-03 22:41:21 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2010-Nov-03 22:41:21 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2010-Nov-03 22:41:21 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2010-Nov-03 22:41:21 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Nov-03 22:41:21 LOG5 begin_task: Level: (2) ID = <10041> Status = 0 0 0 0 ok 2010-Nov-03 22:41:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Nov-03 22:41:21 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Nov-03 22:41:21 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2010-Nov-03 22:41:21 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Nov-03 22:41:21 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Nov-03 22:41:21 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2010-Nov-03 22:41:21 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Nov-03 22:41:21 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc2" 2010-Nov-03 22:41:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Nov-03 22:41:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Nov-03 22:41:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 J. Hernandez' 2010-Nov-03 22:41:21 LOG4 got_cormsg: From DATATAKING: set ra 011400.0 2010-Nov-03 22:41:21 LOG4 got_cormsg: From DATATAKING: set dec +304000 2010-Nov-03 22:41:21 LOG4 got_cormsg: From DATATAKING: vw% 011400.0 2010-Nov-03 22:41:21 LOG4 got_cormsg: From DATATAKING: vw% +304000 2010-Nov-03 22:41:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:41:21 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Nov-03 22:41:21 LOG4 got_cormsg: From DATATAKING: pnt tr 011400.0 +304000 -CJ 2010-Nov-03 22:41:21 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Nov-03 22:41:21 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Nov-03 22:41:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:43:51 ERROR end_wait_seconds: ERROR timed out while waiting for ALFA rotation! 2010-Nov-03 22:43:51 LOG1 task_failed: Task 'waiting on ALFA rotation' failed! 2010-Nov-03 22:43:51 LOG5 task_failed: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2010-Nov-03 22:43:51 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'FAILED' 2010-Nov-03 22:43:51 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 1 failed 2010-Nov-03 22:43:51 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Nov-03 22:43:51 ALERT rotate_alfa: Current ALFA angle is +62.1 degrees! 2010-Nov-03 22:43:51 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Nov-03 22:43:51 LOG5 finish_task: Level: (2) ID = <10041> Status = 0 0 0 1 failed 2010-Nov-03 22:43:51 ERROR finish_task: ERROR failed configuration: rotating ALFA to +19 degrees 2010-Nov-03 22:43:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Nov-03 22:43:51 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'FAILED' 2010-Nov-03 22:43:51 LOG5 end_task: Level: (2) ID = <10041> Status = 0 0 0 1 failed 2010-Nov-03 22:43:51 ALERT run_command_file: Stopping command file processing at line 15! 2010-Nov-03 22:43:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Nov-03 22:43:51 STOP finish_task: Finishing task 'running command file '101103.cmd'' 2010-Nov-03 22:43:51 LOG5 finish_task: Level: (1) ID = <10030> Status = 0 0 0 1 failed 2010-Nov-03 22:43:51 ERROR finish_task: ERROR failed running: command file '101103.cmd' 2010-Nov-03 22:43:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Nov-03 22:43:51 END end_task: Finishing task 'running command file '101103.cmd'' with status 'FAILED' 2010-Nov-03 22:43:51 LOG5 end_task: Level: (1) ID = <10030> Status = 0 0 0 1 failed 2010-Nov-03 22:45:10 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima31.cmd' (at lines 1 - 24) 2010-Nov-03 22:45:10 INFO4 CIMA-load_command_file: Loaded command file '101103.cmd' 2010-Nov-03 22:45:12 INFO1 CIMA-run_command_file: Transferring command file '101103.cmd' to executive ... 2010-Nov-03 22:45:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_cima31.conf} 2010-Nov-03 22:45:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2010-Nov-03 22:45:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2010-Nov-03 22:45:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2010-Nov-03 22:45:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2010-Nov-03 22:45:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2010-Nov-03 22:45:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2010-Nov-03 22:45:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2010-Nov-03 22:45:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2010-Nov-03 22:45:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2010-Nov-03 22:45:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2010-Nov-03 22:45:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2010-Nov-03 22:45:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2010-Nov-03 22:45:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 28 {LOAD ages_mock.conf} 2010-Nov-03 22:45:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 29 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2010-Nov-03 22:45:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 30 {CATALOG AGESFull.cat} 2010-Nov-03 22:45:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 33 {IF LSTSLEW(AGES33PP_p3_110) < 010138 THEN} 2010-Nov-03 22:45:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 34 {FIXEDDRIFT az=203.11 alfaangle=-3.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_110 ra=12400.00 dec=295630.00} 2010-Nov-03 22:45:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 37 {ENDIF} 2010-Nov-03 22:45:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 40 {IF LSTSLEW(AGES33PP_p1_004) < 012438 THEN} 2010-Nov-03 22:45:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 41 {FIXEDDRIFT az=180.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_004 ra=12400.00 dec=323530.00} 2010-Nov-03 22:45:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 44 {ENDIF} 2010-Nov-03 22:45:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 47 {IF LSTSLEW(AGES33PP_p3_112) < 014738 THEN} 2010-Nov-03 22:45:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 48 {FIXEDDRIFT az=156.79 alfaangle=41.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_112 ra=12400.00 dec=295330.00} 2010-Nov-03 22:45:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 51 {ENDIF} 2010-Nov-03 22:45:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 26 54 {IF LSTSLEW(AGES33PP_p3_155) < 021038 THEN} 2010-Nov-03 22:45:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 27 55 {FIXEDDRIFT az=137.15 alfaangle=62.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_155 ra=12400.00 dec=284900.00} 2010-Nov-03 22:45:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 28 58 {ENDIF} 2010-Nov-03 22:45:13 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Nov-03 22:45:13 LOG4 exec_msg: From OBSERVER: run_command_file 101103.cmd 1 1 28 2010-Nov-03 22:45:13 LOG4 run_command_file: Calling 'run_command_file 101103.cmd 1 1 28' 2010-Nov-03 22:45:13 BEGIN begin_task: Starting task 'running command file '101103.cmd'' 2010-Nov-03 22:45:13 LOG5 begin_task: Level: (1) ID = <10043> Status = 0 0 0 0 ok 2010-Nov-03 22:45:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '101103.cmd' ...} 2010-Nov-03 22:45:13 NOTE run_command_file: Starting execution of command file '101103.cmd' from line 1 2010-Nov-03 22:45:13 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_cima31.conf' 2010-Nov-03 22:45:13 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-Nov-03 22:45:13 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Nov-03 22:45:13 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-Nov-03 22:45:13 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima31.conf' 2010-Nov-03 22:45:13 LOG2 CIMA-antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84312 J 2010-Nov-03 22:45:13 LOG2 CIMA-antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 22:45:13 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 96313 2010 307 0.0 2010-Nov-03 22:45:13 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 22:45:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Nov-03 22:45:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Nov-03 22:45:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Nov-03 22:45:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Nov-03 22:45:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Nov-03 22:45:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2010-Nov-03 22:45:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Nov-03 22:45:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Nov-03 22:45:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Nov-03 22:45:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Nov-03 22:45:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Nov-03 22:45:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Nov-03 22:45:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Nov-03 22:45:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Nov-03 22:45:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Nov-03 22:45:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Nov-03 22:45:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Nov-03 22:45:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Nov-03 22:45:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Nov-03 22:45:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Nov-03 22:45:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Nov-03 22:45:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Nov-03 22:45:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Nov-03 22:45:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Nov-03 22:45:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Nov-03 22:45:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Nov-03 22:45:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Nov-03 22:45:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Nov-03 22:45:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Nov-03 22:45:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Nov-03 22:45:15 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Nov-03 22:45:15 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Nov-03 22:45:15 LOG5 begin_task: Level: (2) ID = <10044> Status = 0 0 0 0 ok 2010-Nov-03 22:45:15 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Nov-03 22:45:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Nov-03 22:45:15 LOG1 config_iflo: Receiver ALFA already selected 2010-Nov-03 22:45:15 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Nov-03 22:45:15 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Nov-03 22:45:15 START begin_task: Starting task 'waiting on command to ALFA' 2010-Nov-03 22:45:15 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2010-Nov-03 22:45:15 LOG4 got_alfamon: From ALFAMON: ACK 2010-Nov-03 22:45:15 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Nov-03 22:45:15 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2010-Nov-03 22:45:15 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Nov-03 22:45:15 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Nov-03 22:45:15 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2010-Nov-03 22:45:15 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2010-Nov-03 22:45:15 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Nov-03 22:45:15 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Nov-03 22:45:15 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2010-Nov-03 22:45:15 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2010-Nov-03 22:45:15 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2010-Nov-03 22:45:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Nov-03 22:45:15 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2010-Nov-03 22:45:15 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2010-Nov-03 22:45:15 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Nov-03 22:45:15 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Nov-03 22:45:15 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Nov-03 22:45:15 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Nov-03 22:45:15 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Nov-03 22:45:15 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2010-Nov-03 22:45:15 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2010-Nov-03 22:45:15 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2010-Nov-03 22:45:15 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2010-Nov-03 22:45:15 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2010-Nov-03 22:45:15 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2010-Nov-03 22:45:15 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2010-Nov-03 22:45:15 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Nov-03 22:45:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 22:45:15 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2010-Nov-03 22:45:15 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2010-Nov-03 22:45:15 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Nov-03 22:45:15 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2010-Nov-03 22:45:15 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2010-Nov-03 22:45:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Nov-03 22:45:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:45:16 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Nov-03 22:45:16 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2010-Nov-03 22:45:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Nov-03 22:45:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 22:45:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:45:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:45:16 LOG4 got_cormsg: From DATATAKING: vw% DONE 2010-Nov-03 22:45:16 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Nov-03 22:45:16 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2010-Nov-03 22:45:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Nov-03 22:45:16 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Nov-03 22:45:16 LOG5 finish_task: Level: (2) ID = <10044> Status = 0 0 0 0 ok 2010-Nov-03 22:45:16 DONE finish_task: DONE finished configuration: IF/LO path 2010-Nov-03 22:45:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 22:45:16 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Nov-03 22:45:16 LOG5 end_task: Level: (2) ID = <10044> Status = 0 0 0 0 ok 2010-Nov-03 22:45:16 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Nov-03 22:45:16 LOG5 begin_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2010-Nov-03 22:45:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Nov-03 22:45:16 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Nov-03 22:45:16 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Nov-03 22:45:16 START begin_task: Starting task 'selecting calibration port' 2010-Nov-03 22:45:16 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2010-Nov-03 22:45:16 LOG3 vw_send: To DATATAKING: calport 3 2010-Nov-03 22:45:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Nov-03 22:45:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:45:16 START begin_task: Starting task 'waiting on calport' 2010-Nov-03 22:45:16 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2010-Nov-03 22:45:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:45:16 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Nov-03 22:45:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:45:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:45:16 LOG4 got_cormsg: From DATATAKING: DONE 2010-Nov-03 22:45:16 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Nov-03 22:45:16 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2010-Nov-03 22:45:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Nov-03 22:45:16 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Nov-03 22:45:16 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2010-Nov-03 22:45:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Nov-03 22:45:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Nov-03 22:45:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Nov-03 22:45:16 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2010-Nov-03 22:45:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:45:16 LOG3 CALCONTROL-caltrig: Software trigger 2010-Nov-03 22:45:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Nov-03 22:45:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Nov-03 22:45:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Nov-03 22:45:16 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2010-Nov-03 22:45:16 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Nov-03 22:45:16 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Nov-03 22:45:16 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Nov-03 22:45:17 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Nov-03 22:45:17 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Nov-03 22:45:17 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Nov-03 22:45:17 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Nov-03 22:45:17 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Nov-03 22:45:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 J. Hernandez 2010-Nov-03 22:45:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 J. Hernandez 2010-Nov-03 22:45:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 J. Hernandez 2010-Nov-03 22:45:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 J. Hernandez 2010-Nov-03 22:45:17 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Nov-03 22:45:17 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Nov-03 22:45:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Nov-03 22:45:17 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2010-Nov-03 22:45:17 LOG3 CALCONTROL-caltrig: Software trigger 2010-Nov-03 22:45:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Nov-03 22:45:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Nov-03 22:45:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Nov-03 22:45:17 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2010-Nov-03 22:45:17 LOG3 sock_errsend: To WAPPDATA: FLUSH 2010-Nov-03 22:45:17 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Nov-03 22:45:17 LOG5 finish_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2010-Nov-03 22:45:17 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Nov-03 22:45:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 22:45:17 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Nov-03 22:45:17 LOG5 end_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2010-Nov-03 22:45:17 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2010-Nov-03 22:45:17 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2010-Nov-03 22:45:17 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2010-Nov-03 22:45:17 LOG3 is_if_valid: Current source data: down 454.8 35.8 1203 - - 1368 3.7 2010-Nov-03 22:45:17 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2010-Nov-03 22:45:17 INFO5 is_if_valid: Condition parsed as: 0 2010-Nov-03 22:45:17 INFO1 is_if_valid: Skipping line 'IF isup(galfasrc) then' 2010-Nov-03 22:45:17 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2010-Nov-03 22:45:17 INFO1 run_command_line: Skipping line 'GOTO galfasrc' in non-true conditional branch 2010-Nov-03 22:45:17 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2010-Nov-03 22:45:17 LOG3 is_if_valid: Current source data: up 543.4 12.4 UP - - 71 0.0 2010-Nov-03 22:45:17 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc2) 2010-Nov-03 22:45:17 INFO5 is_if_valid: Condition parsed as: 1 2010-Nov-03 22:45:17 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2010-Nov-03 22:45:17 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc2 nooffset nowait' 2010-Nov-03 22:45:17 BEGIN begin_task: Starting task 'tracking source 'galfasrc2'' 2010-Nov-03 22:45:17 LOG5 begin_task: Level: (2) ID = <10052> Status = 0 0 0 0 ok 2010-Nov-03 22:45:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc2' ...} 2010-Nov-03 22:45:17 LOG3 track_source: Calling 'track_source galfasrc2 011400.0 +304000 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2010-Nov-03 22:45:17 START begin_task: Starting task 'sending tracking commands' 2010-Nov-03 22:45:17 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2010-Nov-03 22:45:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc2} INFO {Slewing to source 'galfasrc2' ...} 2010-Nov-03 22:45:18 INFO1 track_source: Starting to track galfasrc2 2010-Nov-03 22:45:18 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc2" 2010-Nov-03 22:45:18 LOG3 vw_send: To DATATAKING: set ra 011400.0 2010-Nov-03 22:45:18 LOG3 vw_send: To DATATAKING: set dec +304000 2010-Nov-03 22:45:18 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Nov-03 22:45:18 LOG3 vw_send: To DATATAKING: pnt tr 011400.0 +304000 -CJ 2010-Nov-03 22:45:18 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Nov-03 22:45:18 STOP finish_task: Finishing task 'sending tracking commands' 2010-Nov-03 22:45:18 LOG5 finish_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2010-Nov-03 22:45:18 INFO2 finish_task: DONE finished sending: tracking commands 2010-Nov-03 22:45:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Nov-03 22:45:18 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Nov-03 22:45:18 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2010-Nov-03 22:45:18 STOP finish_task: Finishing task 'tracking source 'galfasrc2'' 2010-Nov-03 22:45:18 LOG5 finish_task: Level: (2) ID = <10052> Status = 0 0 0 0 ok 2010-Nov-03 22:45:18 DONE finish_task: DONE finished tracking: source 'galfasrc2' 2010-Nov-03 22:45:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 22:45:18 END end_task: Finishing task 'tracking source 'galfasrc2'' with status 'OK' 2010-Nov-03 22:45:18 LOG5 end_task: Level: (2) ID = <10052> Status = 0 0 0 0 ok 2010-Nov-03 22:45:18 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2010-Nov-03 22:45:18 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2010-Nov-03 22:45:18 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2010-Nov-03 22:45:18 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2010-Nov-03 22:45:18 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2010-Nov-03 22:45:18 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2010-Nov-03 22:45:18 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2010-Nov-03 22:45:18 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2010-Nov-03 22:45:18 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2010-Nov-03 22:45:18 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Nov-03 22:45:18 LOG5 begin_task: Level: (2) ID = <10054> Status = 0 0 0 0 ok 2010-Nov-03 22:45:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Nov-03 22:45:18 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Nov-03 22:45:18 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2010-Nov-03 22:45:18 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Nov-03 22:45:18 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Nov-03 22:45:18 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2010-Nov-03 22:45:18 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Nov-03 22:45:18 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc2" 2010-Nov-03 22:45:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Nov-03 22:45:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Nov-03 22:45:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 J. Hernandez' 2010-Nov-03 22:45:18 LOG4 got_cormsg: From DATATAKING: set ra 011400.0 2010-Nov-03 22:45:18 LOG4 got_cormsg: From DATATAKING: vw% 011400.0 2010-Nov-03 22:45:18 LOG4 got_cormsg: From DATATAKING: 2010-Nov-03 22:45:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:45:18 LOG4 got_cormsg: From DATATAKING: set dec +304000 2010-Nov-03 22:45:18 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Nov-03 22:45:18 LOG4 got_cormsg: From DATATAKING: pnt tr 011400.0 +304000 -CJ 2010-Nov-03 22:45:18 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Nov-03 22:45:18 LOG4 got_cormsg: From DATATAKING: +304000 2010-Nov-03 22:45:18 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2010-Nov-03 22:47:48 ERROR end_wait_seconds: ERROR timed out while waiting for ALFA rotation! 2010-Nov-03 22:47:48 LOG1 task_failed: Task 'waiting on ALFA rotation' failed! 2010-Nov-03 22:47:48 LOG5 task_failed: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2010-Nov-03 22:47:48 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'FAILED' 2010-Nov-03 22:47:48 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 1 failed 2010-Nov-03 22:47:48 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Nov-03 22:47:48 ALERT rotate_alfa: Current ALFA angle is +62.1 degrees! 2010-Nov-03 22:47:48 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Nov-03 22:47:48 LOG5 finish_task: Level: (2) ID = <10054> Status = 0 0 0 1 failed 2010-Nov-03 22:47:48 ERROR finish_task: ERROR failed configuration: rotating ALFA to +19 degrees 2010-Nov-03 22:47:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Nov-03 22:47:48 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'FAILED' 2010-Nov-03 22:47:49 LOG5 end_task: Level: (2) ID = <10054> Status = 0 0 0 1 failed 2010-Nov-03 22:47:49 ALERT run_command_file: Stopping command file processing at line 15! 2010-Nov-03 22:47:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Nov-03 22:47:49 STOP finish_task: Finishing task 'running command file '101103.cmd'' 2010-Nov-03 22:47:49 LOG5 finish_task: Level: (1) ID = <10043> Status = 0 0 0 1 failed 2010-Nov-03 22:47:49 ERROR finish_task: ERROR failed running: command file '101103.cmd' 2010-Nov-03 22:47:49 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Nov-03 22:47:49 END end_task: Finishing task 'running command file '101103.cmd'' with status 'FAILED' 2010-Nov-03 22:47:49 LOG5 end_task: Level: (1) ID = <10043> Status = 0 0 0 1 failed 2010-Nov-03 22:53:00 COMMAND CIMA-send_to_exec: Sending command to stop observation 2010-Nov-03 22:53:00 LOG4 exec_msg: From OBSERVER: stop_task 2010-Nov-03 22:53:00 WARNING stop_task: WARNING stop at end of current loop/command requested! 2010-Nov-03 22:53:03 ALERT CIMA-exit_cima: Exiting CIMA ... 2010-Nov-03 22:53:03 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2010-Nov-03 22:53:03 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2010-Nov-03 22:53:03 LOG3 vw_send: To DATATAKING: mvdata a2048 2010-Nov-03 22:53:03 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2010-Nov-03 22:53:03 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2010-Nov-03 22:53:03 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2010-Nov-03 22:53:03 LOG4 got_cormsg: From DATATAKING: mvdata a2048 2010-Nov-03 22:53:03 NOTE CIMA-exit_cima: Cleaning up session ... 2010-Nov-03 22:53:03 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2010-Nov-03 22:53:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:53:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:53:05 LOG3 exec_msg: Closing socket 2010-Nov-03 22:54:06 BEGIN executive: CIMA executive starting ... 2010-Nov-03 22:54:06 NOTE executive: STARTING NEW CIMA SESSION 2010-Nov-03 22:54:06 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2010-Nov-03 22:54:06 INFO4 executive: This is an ON-LINE session 2010-Nov-03 22:54:06 INFO4 executive: This is a LOCAL session 2010-Nov-03 22:54:06 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2010-Nov-03 22:54:06 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'J. Hernandez' 2010-Nov-03 22:54:06 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20101103' 2010-Nov-03 22:54:07 LOG2 log_preferences: Currently applied preferences: 2010-Nov-03 22:54:07 LOG2 log_preferences: prefs(dailylog) = daily 2010-Nov-03 22:54:07 LOG2 log_preferences: prefs(offlinelog) = skip 2010-Nov-03 22:54:07 LOG2 log_preferences: prefs(datawindow) = ignore 2010-Nov-03 22:54:07 LOG2 log_preferences: prefs(limitwarning) = enabled 2010-Nov-03 22:54:07 LOG2 log_preferences: prefs(wappfailure) = abort 2010-Nov-03 22:54:07 LOG2 log_preferences: prefs(helpstyle) = stay-open 2010-Nov-03 22:54:07 LOG2 log_preferences: prefs(logcolours) = full 2010-Nov-03 22:54:07 LOG2 log_preferences: prefs(displaylevel) = INFO3 2010-Nov-03 22:54:07 LOG2 log_preferences: prefs(loglevel) = LOG5 2010-Nov-03 22:54:07 LOG2 log_preferences: prefs(displayformat) = short 2010-Nov-03 22:54:07 LOG2 log_preferences: prefs(logformat) = new 2010-Nov-03 22:54:07 LOG2 log_preferences: prefs(fontsize) = 4 2010-Nov-03 22:54:07 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2010-Nov-03 22:54:07 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2010-Nov-03 22:54:07 ALERT executive: CIMA executive ready 2010-Nov-03 22:54:08 NOTE frontend: CIMA frontend ready 2010-Nov-03 22:54:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:54:09 LOG4 got_cormsg: From DATATAKING: setup 2010-Nov-03 22:54:13 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2010-Nov-03 22:54:13 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2010-Nov-03 22:54:13 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2010-Nov-03 22:54:13 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2010-Nov-03 22:54:13 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Nov-03 22:54:13 NOTE select_receiver: Starting to select receiver ALFA 2010-Nov-03 22:54:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-Nov-03 22:54:13 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-Nov-03 22:54:13 LOG3 vw_send: To DATATAKING: acvlbical off 2010-Nov-03 22:54:13 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-Nov-03 22:54:13 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-Nov-03 22:54:13 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Nov-03 22:54:13 DONE finish_task: DONE finished selecting: receiver ALFA 2010-Nov-03 22:54:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 22:54:13 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-Nov-03 22:54:13 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Nov-03 22:54:13 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2010-Nov-03 22:54:13 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2010-Nov-03 22:54:13 LOG4 got_cormsg: From DATATAKING: vw% io 2010-Nov-03 22:54:13 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2010-Nov-03 22:54:13 LOG4 got_cormsg: From DATATAKING: 2010-Nov-03 22:54:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:54:13 LOG4 got_cormsg: From DATATAKING: tape stat 2010-Nov-03 22:54:13 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2010-Nov-03 22:54:13 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2010-Nov-03 22:54:13 LOG4 got_cormsg: From DATATAKING: vw% connectall 2010-Nov-03 22:54:14 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2010-Nov-03 22:54:14 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2010-Nov-03 22:54:14 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2010-Nov-03 22:54:14 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2010-Nov-03 22:54:14 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2010-Nov-03 22:54:14 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2010-Nov-03 22:54:14 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2010-Nov-03 22:54:14 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2010-Nov-03 22:54:14 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2010-Nov-03 22:54:14 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-Nov-03 22:54:14 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-Nov-03 22:54:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:54:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:54:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:54:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:54:44 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima31.cmd' (at lines 1 - 24) 2010-Nov-03 22:54:44 INFO4 CIMA-load_command_file: Loaded command file '101103.cmd' 2010-Nov-03 22:54:47 INFO1 CIMA-run_command_file: Transferring command file '101103.cmd' to executive ... 2010-Nov-03 22:54:47 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_cima31.conf} 2010-Nov-03 22:54:47 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2010-Nov-03 22:54:47 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2010-Nov-03 22:54:47 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2010-Nov-03 22:54:47 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2010-Nov-03 22:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2010-Nov-03 22:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2010-Nov-03 22:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2010-Nov-03 22:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2010-Nov-03 22:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2010-Nov-03 22:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2010-Nov-03 22:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2010-Nov-03 22:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2010-Nov-03 22:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 28 {LOAD ages_mock.conf} 2010-Nov-03 22:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 29 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2010-Nov-03 22:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 30 {CATALOG AGESFull.cat} 2010-Nov-03 22:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 33 {IF LSTSLEW(AGES33PP_p3_110) < 010138 THEN} 2010-Nov-03 22:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 34 {FIXEDDRIFT az=203.11 alfaangle=-3.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_110 ra=12400.00 dec=295630.00} 2010-Nov-03 22:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 37 {ENDIF} 2010-Nov-03 22:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 40 {IF LSTSLEW(AGES33PP_p1_004) < 012438 THEN} 2010-Nov-03 22:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 41 {FIXEDDRIFT az=180.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_004 ra=12400.00 dec=323530.00} 2010-Nov-03 22:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 44 {ENDIF} 2010-Nov-03 22:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 47 {IF LSTSLEW(AGES33PP_p3_112) < 014738 THEN} 2010-Nov-03 22:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 48 {FIXEDDRIFT az=156.79 alfaangle=41.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_112 ra=12400.00 dec=295330.00} 2010-Nov-03 22:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 51 {ENDIF} 2010-Nov-03 22:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 26 54 {IF LSTSLEW(AGES33PP_p3_155) < 021038 THEN} 2010-Nov-03 22:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 27 55 {FIXEDDRIFT az=137.15 alfaangle=62.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_155 ra=12400.00 dec=284900.00} 2010-Nov-03 22:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 28 58 {ENDIF} 2010-Nov-03 22:54:48 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Nov-03 22:54:48 LOG4 exec_msg: From OBSERVER: run_command_file 101103.cmd 1 1 28 2010-Nov-03 22:54:48 LOG4 run_command_file: Calling 'run_command_file 101103.cmd 1 1 28' 2010-Nov-03 22:54:48 BEGIN begin_task: Starting task 'running command file '101103.cmd'' 2010-Nov-03 22:54:48 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-Nov-03 22:54:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '101103.cmd' ...} 2010-Nov-03 22:54:48 NOTE run_command_file: Starting execution of command file '101103.cmd' from line 1 2010-Nov-03 22:54:48 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_cima31.conf' 2010-Nov-03 22:54:48 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-Nov-03 22:54:48 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Nov-03 22:54:48 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-Nov-03 22:54:48 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima31.conf' 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Nov-03 22:54:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Nov-03 22:54:50 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Nov-03 22:54:50 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Nov-03 22:54:50 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2010-Nov-03 22:54:50 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Nov-03 22:54:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Nov-03 22:54:50 INFO1 config_iflo: Selecting receiver ALFA 2010-Nov-03 22:54:50 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2010-Nov-03 22:54:50 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2010-Nov-03 22:54:50 START begin_task: Starting task 'selecting receiver ALFA' 2010-Nov-03 22:54:50 LOG5 begin_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2010-Nov-03 22:54:50 NOTE select_receiver: Starting to select receiver ALFA 2010-Nov-03 22:54:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-Nov-03 22:54:51 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-Nov-03 22:54:51 LOG3 vw_send: To DATATAKING: acvlbical off 2010-Nov-03 22:54:51 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-Nov-03 22:54:51 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-Nov-03 22:54:51 LOG5 finish_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2010-Nov-03 22:54:51 INFO2 finish_task: DONE finished selecting: receiver ALFA 2010-Nov-03 22:54:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Nov-03 22:54:51 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-Nov-03 22:54:51 LOG5 end_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2010-Nov-03 22:54:51 START begin_task: Starting task 'waiting for receiver ALFA' 2010-Nov-03 22:54:51 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-Nov-03 22:54:51 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2010-Nov-03 22:54:51 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-Nov-03 22:54:51 INFO1 config_iflo: Configuring rest of the IF/LO path 2010-Nov-03 22:54:51 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2010-Nov-03 22:54:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Nov-03 22:54:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Nov-03 22:54:51 START begin_task: Starting task 'waiting on command to ALFA' 2010-Nov-03 22:54:51 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-Nov-03 22:54:51 LOG4 got_alfamon: From ALFAMON: ACK 2010-Nov-03 22:54:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Nov-03 22:54:51 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-Nov-03 22:54:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Nov-03 22:54:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Nov-03 22:54:51 LOG3 vw_send: To DATATAKING: alfafb 1 2010-Nov-03 22:54:51 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2010-Nov-03 22:54:51 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Nov-03 22:54:51 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Nov-03 22:54:51 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2010-Nov-03 22:54:51 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2010-Nov-03 22:54:51 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2010-Nov-03 22:54:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Nov-03 22:54:51 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2010-Nov-03 22:54:51 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2010-Nov-03 22:54:51 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Nov-03 22:54:51 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Nov-03 22:54:51 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Nov-03 22:54:51 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Nov-03 22:54:51 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Nov-03 22:54:51 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2010-Nov-03 22:54:51 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2010-Nov-03 22:54:51 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2010-Nov-03 22:54:51 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2010-Nov-03 22:54:51 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-Nov-03 22:54:51 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2010-Nov-03 22:54:51 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-Nov-03 22:54:51 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Nov-03 22:54:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 22:54:51 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Nov-03 22:54:51 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2010-Nov-03 22:54:51 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Nov-03 22:54:51 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2010-Nov-03 22:54:51 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2010-Nov-03 22:54:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Nov-03 22:54:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:54:51 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Nov-03 22:54:51 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2010-Nov-03 22:54:51 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-Nov-03 22:54:51 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-Nov-03 22:54:51 LOG4 got_cormsg: From DATATAKING: alfafb 1 2010-Nov-03 22:54:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2010-Nov-03 22:54:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2010-Nov-03 22:54:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2010-Nov-03 22:54:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2010-Nov-03 22:54:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Nov-03 22:54:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2010-Nov-03 22:54:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2010-Nov-03 22:54:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2010-Nov-03 22:54:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2010-Nov-03 22:54:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2010-Nov-03 22:54:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2010-Nov-03 22:54:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-Nov-03 22:54:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2010-Nov-03 22:54:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-Nov-03 22:54:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 22:54:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Nov-03 22:54:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2010-Nov-03 22:54:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2010-Nov-03 22:54:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2010-Nov-03 22:54:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:54:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:54:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:54:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:54:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:54:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:55:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:55:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:55:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:55:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:55:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:55:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:55:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:55:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:55:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:55:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:55:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:55:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:55:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:55:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:55:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:55:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:55:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:55:07 LOG4 got_cormsg: From DATATAKING: DONE 2010-Nov-03 22:55:07 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Nov-03 22:55:07 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2010-Nov-03 22:55:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Nov-03 22:55:07 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Nov-03 22:55:07 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2010-Nov-03 22:55:07 DONE finish_task: DONE finished configuration: IF/LO path 2010-Nov-03 22:55:07 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 22:55:07 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Nov-03 22:55:07 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2010-Nov-03 22:55:07 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Nov-03 22:55:07 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2010-Nov-03 22:55:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Nov-03 22:55:07 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Nov-03 22:55:07 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Nov-03 22:55:07 START begin_task: Starting task 'selecting calibration port' 2010-Nov-03 22:55:07 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2010-Nov-03 22:55:07 LOG3 vw_send: To DATATAKING: calport 3 2010-Nov-03 22:55:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Nov-03 22:55:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:55:07 START begin_task: Starting task 'waiting on calport' 2010-Nov-03 22:55:07 LOG5 begin_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2010-Nov-03 22:55:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:55:08 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Nov-03 22:55:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:55:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:55:08 LOG4 got_cormsg: From DATATAKING: DONE 2010-Nov-03 22:55:08 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Nov-03 22:55:08 LOG5 end_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2010-Nov-03 22:55:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Nov-03 22:55:08 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Nov-03 22:55:08 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2010-Nov-03 22:55:08 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Nov-03 22:55:08 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Nov-03 22:55:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Nov-03 22:55:08 LOG5 begin_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2010-Nov-03 22:55:08 LOG3 CALCONTROL-caltrig: Software trigger 2010-Nov-03 22:55:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:55:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Nov-03 22:55:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Nov-03 22:55:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Nov-03 22:55:08 LOG5 end_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2010-Nov-03 22:55:08 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Nov-03 22:55:08 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Nov-03 22:55:08 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Nov-03 22:55:08 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Nov-03 22:55:08 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Nov-03 22:55:08 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Nov-03 22:55:08 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Nov-03 22:55:08 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Nov-03 22:55:08 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 J. Hernandez 2010-Nov-03 22:55:08 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 J. Hernandez 2010-Nov-03 22:55:08 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 J. Hernandez 2010-Nov-03 22:55:08 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 J. Hernandez 2010-Nov-03 22:55:08 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Nov-03 22:55:08 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Nov-03 22:55:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Nov-03 22:55:08 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2010-Nov-03 22:55:08 LOG3 CALCONTROL-caltrig: Software trigger 2010-Nov-03 22:55:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Nov-03 22:55:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Nov-03 22:55:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Nov-03 22:55:08 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2010-Nov-03 22:55:08 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 J. Hernandez 2010-Nov-03 22:55:08 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 J. Hernandez 2010-Nov-03 22:55:08 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 J. Hernandez 2010-Nov-03 22:55:08 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 J. Hernandez 2010-Nov-03 22:55:08 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Nov-03 22:55:08 LOG5 finish_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2010-Nov-03 22:55:08 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Nov-03 22:55:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 22:55:08 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Nov-03 22:55:08 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2010-Nov-03 22:55:09 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2010-Nov-03 22:55:09 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2010-Nov-03 22:55:09 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2010-Nov-03 22:55:09 LOG3 is_if_valid: Current source data: down 455.3 38.1 1193 - - 1358 3.3 2010-Nov-03 22:55:09 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2010-Nov-03 22:55:09 INFO5 is_if_valid: Condition parsed as: 0 2010-Nov-03 22:55:09 INFO1 is_if_valid: Skipping line 'IF isup(galfasrc) then' 2010-Nov-03 22:55:09 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2010-Nov-03 22:55:09 INFO1 run_command_line: Skipping line 'GOTO galfasrc' in non-true conditional branch 2010-Nov-03 22:55:09 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2010-Nov-03 22:55:09 LOG3 is_if_valid: Current source data: up 533.5 12.5 UP - - 61 0.0 2010-Nov-03 22:55:09 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc2) 2010-Nov-03 22:55:09 INFO5 is_if_valid: Condition parsed as: 1 2010-Nov-03 22:55:09 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2010-Nov-03 22:55:09 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc2 nooffset nowait' 2010-Nov-03 22:55:09 BEGIN begin_task: Starting task 'tracking source 'galfasrc2'' 2010-Nov-03 22:55:09 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2010-Nov-03 22:55:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc2' ...} 2010-Nov-03 22:55:09 LOG3 track_source: Calling 'track_source galfasrc2 011400.0 +304000 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2010-Nov-03 22:55:09 START begin_task: Starting task 'sending tracking commands' 2010-Nov-03 22:55:09 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2010-Nov-03 22:55:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc2} INFO {Slewing to source 'galfasrc2' ...} 2010-Nov-03 22:55:09 INFO1 track_source: Starting to track galfasrc2 2010-Nov-03 22:55:09 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc2" 2010-Nov-03 22:55:09 LOG3 vw_send: To DATATAKING: set ra 011400.0 2010-Nov-03 22:55:09 LOG3 vw_send: To DATATAKING: set dec +304000 2010-Nov-03 22:55:09 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Nov-03 22:55:09 LOG3 vw_send: To DATATAKING: pnt tr 011400.0 +304000 -CJ 2010-Nov-03 22:55:09 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Nov-03 22:55:09 STOP finish_task: Finishing task 'sending tracking commands' 2010-Nov-03 22:55:09 LOG5 finish_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2010-Nov-03 22:55:09 INFO2 finish_task: DONE finished sending: tracking commands 2010-Nov-03 22:55:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Nov-03 22:55:09 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Nov-03 22:55:09 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2010-Nov-03 22:55:09 STOP finish_task: Finishing task 'tracking source 'galfasrc2'' 2010-Nov-03 22:55:09 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2010-Nov-03 22:55:09 DONE finish_task: DONE finished tracking: source 'galfasrc2' 2010-Nov-03 22:55:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 22:55:09 END end_task: Finishing task 'tracking source 'galfasrc2'' with status 'OK' 2010-Nov-03 22:55:09 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2010-Nov-03 22:55:09 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2010-Nov-03 22:55:09 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2010-Nov-03 22:55:10 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2010-Nov-03 22:55:10 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2010-Nov-03 22:55:10 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2010-Nov-03 22:55:10 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2010-Nov-03 22:55:10 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2010-Nov-03 22:55:10 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2010-Nov-03 22:55:10 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2010-Nov-03 22:55:10 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Nov-03 22:55:10 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2010-Nov-03 22:55:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Nov-03 22:55:10 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Nov-03 22:55:10 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2010-Nov-03 22:55:10 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Nov-03 22:55:10 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Nov-03 22:55:10 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-Nov-03 22:55:10 NOTE WAPPDATA-new_file: New FITS file: wapp.20101103.a2048.0002.fits 2010-Nov-03 22:55:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 J. Hernandez' 2010-Nov-03 22:55:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc2" 2010-Nov-03 22:55:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Nov-03 22:55:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Nov-03 22:55:10 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20101103.a2048.0002.fits} 2010-Nov-03 22:55:10 LOG4 got_cormsg: From DATATAKING: set ra 011400.0 2010-Nov-03 22:55:10 LOG4 got_cormsg: From DATATAKING: set dec +304000 2010-Nov-03 22:55:10 LOG4 got_cormsg: From DATATAKING: vw% 011400.0 2010-Nov-03 22:55:10 LOG4 got_cormsg: From DATATAKING: vw% +304000 2010-Nov-03 22:55:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:55:10 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Nov-03 22:55:10 LOG4 got_cormsg: From DATATAKING: pnt tr 011400.0 +304000 -CJ 2010-Nov-03 22:55:10 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Nov-03 22:55:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Nov-03 22:55:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:55:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 J. Hernandez' 2010-Nov-03 22:57:40 ERROR end_wait_seconds: ERROR timed out while waiting for ALFA rotation! 2010-Nov-03 22:57:40 LOG1 task_failed: Task 'waiting on ALFA rotation' failed! 2010-Nov-03 22:57:40 LOG5 task_failed: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-Nov-03 22:57:40 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'FAILED' 2010-Nov-03 22:57:40 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 1 failed 2010-Nov-03 22:57:40 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Nov-03 22:57:40 ALERT rotate_alfa: Current ALFA angle is +62.1 degrees! 2010-Nov-03 22:57:40 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Nov-03 22:57:40 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 1 failed 2010-Nov-03 22:57:40 ERROR finish_task: ERROR failed configuration: rotating ALFA to +19 degrees 2010-Nov-03 22:57:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Nov-03 22:57:40 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'FAILED' 2010-Nov-03 22:57:40 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 1 failed 2010-Nov-03 22:57:40 ALERT run_command_file: Stopping command file processing at line 15! 2010-Nov-03 22:57:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Nov-03 22:57:40 STOP finish_task: Finishing task 'running command file '101103.cmd'' 2010-Nov-03 22:57:40 LOG5 finish_task: Level: (1) ID = <10002> Status = 0 0 0 1 failed 2010-Nov-03 22:57:40 ERROR finish_task: ERROR failed running: command file '101103.cmd' 2010-Nov-03 22:57:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Nov-03 22:57:40 END end_task: Finishing task 'running command file '101103.cmd'' with status 'FAILED' 2010-Nov-03 22:57:40 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 1 failed 2010-Nov-03 22:57:50 COMMAND CIMA-send_to_exec: Sending command to reset executive status 2010-Nov-03 22:57:50 LOG4 exec_msg: From OBSERVER: reset_task 2010-Nov-03 22:57:50 WARNING reset_task: WARNING resetting all tasks! 2010-Nov-03 22:57:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Resetted 2010-Nov-03 22:58:48 COMMAND CIMA-send_to_exec: Sending command to reset executive status 2010-Nov-03 22:58:48 LOG4 exec_msg: From OBSERVER: reset_task 2010-Nov-03 22:58:48 WARNING reset_task: WARNING resetting all tasks! 2010-Nov-03 22:58:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Resetted 2010-Nov-03 22:59:32 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima31.cmd' (at lines 1 - 24) 2010-Nov-03 22:59:32 INFO4 CIMA-load_command_file: Loaded command file '101103.cmd' 2010-Nov-03 22:59:34 INFO1 CIMA-run_command_file: Transferring command file '101103.cmd' to executive ... 2010-Nov-03 22:59:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_cima31.conf} 2010-Nov-03 22:59:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2010-Nov-03 22:59:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2010-Nov-03 22:59:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2010-Nov-03 22:59:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2010-Nov-03 22:59:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2010-Nov-03 22:59:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2010-Nov-03 22:59:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2010-Nov-03 22:59:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2010-Nov-03 22:59:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2010-Nov-03 22:59:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2010-Nov-03 22:59:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2010-Nov-03 22:59:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2010-Nov-03 22:59:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 28 {LOAD ages_mock.conf} 2010-Nov-03 22:59:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 29 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2010-Nov-03 22:59:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 30 {CATALOG AGESFull.cat} 2010-Nov-03 22:59:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 33 {IF LSTSLEW(AGES33PP_p3_110) < 010138 THEN} 2010-Nov-03 22:59:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 34 {FIXEDDRIFT az=203.11 alfaangle=-3.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_110 ra=12400.00 dec=295630.00} 2010-Nov-03 22:59:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 37 {ENDIF} 2010-Nov-03 22:59:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 40 {IF LSTSLEW(AGES33PP_p1_004) < 012438 THEN} 2010-Nov-03 22:59:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 41 {FIXEDDRIFT az=180.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_004 ra=12400.00 dec=323530.00} 2010-Nov-03 22:59:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 44 {ENDIF} 2010-Nov-03 22:59:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 47 {IF LSTSLEW(AGES33PP_p3_112) < 014738 THEN} 2010-Nov-03 22:59:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 48 {FIXEDDRIFT az=156.79 alfaangle=41.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_112 ra=12400.00 dec=295330.00} 2010-Nov-03 22:59:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 51 {ENDIF} 2010-Nov-03 22:59:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 26 54 {IF LSTSLEW(AGES33PP_p3_155) < 021038 THEN} 2010-Nov-03 22:59:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 27 55 {FIXEDDRIFT az=137.15 alfaangle=62.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_155 ra=12400.00 dec=284900.00} 2010-Nov-03 22:59:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 28 58 {ENDIF} 2010-Nov-03 22:59:34 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Nov-03 22:59:34 LOG4 exec_msg: From OBSERVER: run_command_file 101103.cmd 1 1 28 2010-Nov-03 22:59:34 LOG4 run_command_file: Calling 'run_command_file 101103.cmd 1 1 28' 2010-Nov-03 22:59:34 BEGIN begin_task: Starting task 'running command file '101103.cmd'' 2010-Nov-03 22:59:34 LOG5 begin_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2010-Nov-03 22:59:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '101103.cmd' ...} 2010-Nov-03 22:59:34 NOTE run_command_file: Starting execution of command file '101103.cmd' from line 1 2010-Nov-03 22:59:34 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_cima31.conf' 2010-Nov-03 22:59:34 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-Nov-03 22:59:34 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Nov-03 22:59:34 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-Nov-03 22:59:35 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima31.conf' 2010-Nov-03 22:59:35 LOG2 CIMA-antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84314 J 2010-Nov-03 22:59:35 LOG2 CIMA-antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 22:59:35 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 97174 2010 307 0.0 2010-Nov-03 22:59:35 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 22:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Nov-03 22:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Nov-03 22:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Nov-03 22:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Nov-03 22:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Nov-03 22:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2010-Nov-03 22:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Nov-03 22:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2010-Nov-03 22:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2010-Nov-03 22:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2010-Nov-03 22:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2010-Nov-03 22:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2010-Nov-03 22:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2010-Nov-03 22:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2010-Nov-03 22:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2010-Nov-03 22:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2010-Nov-03 22:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Nov-03 22:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Nov-03 22:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Nov-03 22:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Nov-03 22:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Nov-03 22:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Nov-03 22:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Nov-03 22:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Nov-03 22:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Nov-03 22:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Nov-03 22:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Nov-03 22:59:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Nov-03 22:59:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Nov-03 22:59:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Nov-03 22:59:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Nov-03 22:59:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Nov-03 22:59:37 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Nov-03 22:59:37 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Nov-03 22:59:37 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2010-Nov-03 22:59:37 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Nov-03 22:59:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Nov-03 22:59:37 LOG1 config_iflo: Receiver ALFA already selected 2010-Nov-03 22:59:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Nov-03 22:59:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Nov-03 22:59:37 START begin_task: Starting task 'waiting on command to ALFA' 2010-Nov-03 22:59:37 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2010-Nov-03 22:59:37 LOG4 got_alfamon: From ALFAMON: ACK 2010-Nov-03 22:59:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Nov-03 22:59:37 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2010-Nov-03 22:59:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Nov-03 22:59:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Nov-03 22:59:37 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2010-Nov-03 22:59:37 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2010-Nov-03 22:59:37 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Nov-03 22:59:37 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Nov-03 22:59:37 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2010-Nov-03 22:59:37 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2010-Nov-03 22:59:37 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2010-Nov-03 22:59:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Nov-03 22:59:37 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2010-Nov-03 22:59:37 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2010-Nov-03 22:59:37 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Nov-03 22:59:37 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Nov-03 22:59:37 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Nov-03 22:59:37 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Nov-03 22:59:37 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Nov-03 22:59:37 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2010-Nov-03 22:59:37 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2010-Nov-03 22:59:37 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2010-Nov-03 22:59:37 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2010-Nov-03 22:59:37 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2010-Nov-03 22:59:37 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2010-Nov-03 22:59:37 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2010-Nov-03 22:59:37 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Nov-03 22:59:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 22:59:37 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2010-Nov-03 22:59:37 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2010-Nov-03 22:59:37 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Nov-03 22:59:37 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2010-Nov-03 22:59:37 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2010-Nov-03 22:59:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Nov-03 22:59:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:59:37 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Nov-03 22:59:37 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Nov-03 22:59:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Nov-03 22:59:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 22:59:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:59:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:59:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:59:37 LOG4 got_cormsg: From DATATAKING: DONE 2010-Nov-03 22:59:37 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Nov-03 22:59:37 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Nov-03 22:59:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Nov-03 22:59:37 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Nov-03 22:59:37 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2010-Nov-03 22:59:37 DONE finish_task: DONE finished configuration: IF/LO path 2010-Nov-03 22:59:37 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 22:59:37 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Nov-03 22:59:37 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2010-Nov-03 22:59:37 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Nov-03 22:59:37 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2010-Nov-03 22:59:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Nov-03 22:59:37 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Nov-03 22:59:37 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Nov-03 22:59:37 START begin_task: Starting task 'selecting calibration port' 2010-Nov-03 22:59:37 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2010-Nov-03 22:59:37 LOG3 vw_send: To DATATAKING: calport 3 2010-Nov-03 22:59:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Nov-03 22:59:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:59:37 START begin_task: Starting task 'waiting on calport' 2010-Nov-03 22:59:37 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2010-Nov-03 22:59:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:59:37 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Nov-03 22:59:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 22:59:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:59:38 LOG4 got_cormsg: From DATATAKING: DONE 2010-Nov-03 22:59:38 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Nov-03 22:59:38 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2010-Nov-03 22:59:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Nov-03 22:59:38 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Nov-03 22:59:38 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2010-Nov-03 22:59:38 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Nov-03 22:59:38 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Nov-03 22:59:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Nov-03 22:59:38 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2010-Nov-03 22:59:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:59:38 LOG3 CALCONTROL-caltrig: Software trigger 2010-Nov-03 22:59:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Nov-03 22:59:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Nov-03 22:59:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Nov-03 22:59:38 LOG5 end_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2010-Nov-03 22:59:38 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Nov-03 22:59:38 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Nov-03 22:59:38 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Nov-03 22:59:38 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Nov-03 22:59:38 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Nov-03 22:59:38 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Nov-03 22:59:38 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Nov-03 22:59:38 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Nov-03 22:59:38 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 J. Hernandez 2010-Nov-03 22:59:38 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 J. Hernandez 2010-Nov-03 22:59:38 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 J. Hernandez 2010-Nov-03 22:59:38 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 J. Hernandez 2010-Nov-03 22:59:38 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Nov-03 22:59:38 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Nov-03 22:59:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Nov-03 22:59:38 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2010-Nov-03 22:59:38 LOG3 CALCONTROL-caltrig: Software trigger 2010-Nov-03 22:59:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Nov-03 22:59:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Nov-03 22:59:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Nov-03 22:59:38 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2010-Nov-03 22:59:38 LOG3 sock_errsend: To WAPPDATA: FLUSH 2010-Nov-03 22:59:38 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Nov-03 22:59:38 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2010-Nov-03 22:59:38 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Nov-03 22:59:38 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 22:59:38 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Nov-03 22:59:38 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2010-Nov-03 22:59:38 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2010-Nov-03 22:59:38 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2010-Nov-03 22:59:38 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2010-Nov-03 22:59:39 LOG3 is_if_valid: Current source data: down 455.5 39.2 1189 - - 1354 3.1 2010-Nov-03 22:59:39 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2010-Nov-03 22:59:39 INFO5 is_if_valid: Condition parsed as: 0 2010-Nov-03 22:59:39 INFO1 is_if_valid: Skipping line 'IF isup(galfasrc) then' 2010-Nov-03 22:59:39 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2010-Nov-03 22:59:39 INFO1 run_command_line: Skipping line 'GOTO galfasrc' in non-true conditional branch 2010-Nov-03 22:59:39 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2010-Nov-03 22:59:39 LOG3 is_if_valid: Current source data: up 529.1 12.6 UP - - 56 0.0 2010-Nov-03 22:59:39 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc2) 2010-Nov-03 22:59:39 INFO5 is_if_valid: Condition parsed as: 1 2010-Nov-03 22:59:39 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2010-Nov-03 22:59:39 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc2 nooffset nowait' 2010-Nov-03 22:59:39 BEGIN begin_task: Starting task 'tracking source 'galfasrc2'' 2010-Nov-03 22:59:39 LOG5 begin_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2010-Nov-03 22:59:39 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc2' ...} 2010-Nov-03 22:59:39 LOG3 track_source: Calling 'track_source galfasrc2 011400.0 +304000 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2010-Nov-03 22:59:39 START begin_task: Starting task 'sending tracking commands' 2010-Nov-03 22:59:39 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Nov-03 22:59:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc2} INFO {Slewing to source 'galfasrc2' ...} 2010-Nov-03 22:59:39 INFO1 track_source: Starting to track galfasrc2 2010-Nov-03 22:59:39 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc2" 2010-Nov-03 22:59:39 LOG3 vw_send: To DATATAKING: set ra 011400.0 2010-Nov-03 22:59:39 LOG3 vw_send: To DATATAKING: set dec +304000 2010-Nov-03 22:59:39 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Nov-03 22:59:39 LOG3 vw_send: To DATATAKING: pnt tr 011400.0 +304000 -CJ 2010-Nov-03 22:59:39 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Nov-03 22:59:39 STOP finish_task: Finishing task 'sending tracking commands' 2010-Nov-03 22:59:39 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Nov-03 22:59:39 INFO2 finish_task: DONE finished sending: tracking commands 2010-Nov-03 22:59:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Nov-03 22:59:39 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Nov-03 22:59:39 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Nov-03 22:59:39 STOP finish_task: Finishing task 'tracking source 'galfasrc2'' 2010-Nov-03 22:59:39 LOG5 finish_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2010-Nov-03 22:59:39 DONE finish_task: DONE finished tracking: source 'galfasrc2' 2010-Nov-03 22:59:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 22:59:39 END end_task: Finishing task 'tracking source 'galfasrc2'' with status 'OK' 2010-Nov-03 22:59:39 LOG5 end_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2010-Nov-03 22:59:39 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2010-Nov-03 22:59:39 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2010-Nov-03 22:59:39 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2010-Nov-03 22:59:39 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2010-Nov-03 22:59:39 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2010-Nov-03 22:59:39 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2010-Nov-03 22:59:39 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2010-Nov-03 22:59:39 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2010-Nov-03 22:59:40 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2010-Nov-03 22:59:40 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Nov-03 22:59:40 LOG5 begin_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2010-Nov-03 22:59:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Nov-03 22:59:40 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Nov-03 22:59:40 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2010-Nov-03 22:59:40 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Nov-03 22:59:40 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Nov-03 22:59:40 LOG5 begin_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2010-Nov-03 22:59:40 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Nov-03 22:59:40 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc2" 2010-Nov-03 22:59:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Nov-03 22:59:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Nov-03 22:59:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 J. Hernandez' 2010-Nov-03 22:59:40 LOG4 got_cormsg: From DATATAKING: set ra 011400.0 2010-Nov-03 22:59:40 LOG4 got_cormsg: From DATATAKING: set dec +304000 2010-Nov-03 22:59:40 LOG4 got_cormsg: From DATATAKING: vw% 011400.0 2010-Nov-03 22:59:40 LOG4 got_cormsg: From DATATAKING: vw% +304000 2010-Nov-03 22:59:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 22:59:40 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Nov-03 22:59:40 LOG4 got_cormsg: From DATATAKING: pnt tr 011400.0 +304000 -CJ 2010-Nov-03 22:59:40 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Nov-03 22:59:40 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Nov-03 22:59:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:02:10 ERROR end_wait_seconds: ERROR timed out while waiting for ALFA rotation! 2010-Nov-03 23:02:10 LOG1 task_failed: Task 'waiting on ALFA rotation' failed! 2010-Nov-03 23:02:10 LOG5 task_failed: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2010-Nov-03 23:02:10 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'FAILED' 2010-Nov-03 23:02:10 LOG5 end_task: Level: (3) ID = <10029> Status = 0 0 0 1 failed 2010-Nov-03 23:02:10 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Nov-03 23:02:10 ALERT rotate_alfa: Current ALFA angle is +62.1 degrees! 2010-Nov-03 23:02:10 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Nov-03 23:02:10 LOG5 finish_task: Level: (2) ID = <10028> Status = 0 0 0 1 failed 2010-Nov-03 23:02:10 ERROR finish_task: ERROR failed configuration: rotating ALFA to +19 degrees 2010-Nov-03 23:02:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Nov-03 23:02:10 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'FAILED' 2010-Nov-03 23:02:10 LOG5 end_task: Level: (2) ID = <10028> Status = 0 0 0 1 failed 2010-Nov-03 23:02:10 ALERT run_command_file: Stopping command file processing at line 15! 2010-Nov-03 23:02:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Nov-03 23:02:10 STOP finish_task: Finishing task 'running command file '101103.cmd'' 2010-Nov-03 23:02:10 LOG5 finish_task: Level: (1) ID = <10017> Status = 0 0 0 1 failed 2010-Nov-03 23:02:10 ERROR finish_task: ERROR failed running: command file '101103.cmd' 2010-Nov-03 23:02:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Nov-03 23:02:10 END end_task: Finishing task 'running command file '101103.cmd'' with status 'FAILED' 2010-Nov-03 23:02:10 LOG5 end_task: Level: (1) ID = <10017> Status = 0 0 0 1 failed 2010-Nov-03 23:07:28 COMMAND CIMA-send_to_exec: Sending command to reset executive status 2010-Nov-03 23:07:28 LOG4 exec_msg: From OBSERVER: reset_task 2010-Nov-03 23:07:28 WARNING reset_task: WARNING resetting all tasks! 2010-Nov-03 23:07:28 LOG4 send_obs_status: To obs_status: <1> ENDTASK Resetted 2010-Nov-03 23:08:51 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima31.cmd' (at lines 1 - 24) 2010-Nov-03 23:08:51 INFO4 CIMA-load_command_file: Loaded command file '101103.cmd' 2010-Nov-03 23:08:55 INFO1 CIMA-run_command_file: Transferring command file '101103.cmd' to executive ... 2010-Nov-03 23:08:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_cima31.conf} 2010-Nov-03 23:08:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2010-Nov-03 23:08:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2010-Nov-03 23:08:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2010-Nov-03 23:08:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2010-Nov-03 23:08:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2010-Nov-03 23:08:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2010-Nov-03 23:08:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2010-Nov-03 23:08:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2010-Nov-03 23:08:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2010-Nov-03 23:08:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2010-Nov-03 23:08:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2010-Nov-03 23:08:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2010-Nov-03 23:08:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 28 {LOAD ages_mock.conf} 2010-Nov-03 23:08:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 29 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2010-Nov-03 23:08:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 30 {CATALOG AGESFull.cat} 2010-Nov-03 23:08:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 33 {IF LSTSLEW(AGES33PP_p3_110) < 010138 THEN} 2010-Nov-03 23:08:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 34 {FIXEDDRIFT az=203.11 alfaangle=-3.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_110 ra=12400.00 dec=295630.00} 2010-Nov-03 23:08:56 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 37 {ENDIF} 2010-Nov-03 23:08:56 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 40 {IF LSTSLEW(AGES33PP_p1_004) < 012438 THEN} 2010-Nov-03 23:08:56 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 41 {FIXEDDRIFT az=180.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_004 ra=12400.00 dec=323530.00} 2010-Nov-03 23:08:56 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 44 {ENDIF} 2010-Nov-03 23:08:56 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 47 {IF LSTSLEW(AGES33PP_p3_112) < 014738 THEN} 2010-Nov-03 23:08:56 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 48 {FIXEDDRIFT az=156.79 alfaangle=41.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_112 ra=12400.00 dec=295330.00} 2010-Nov-03 23:08:56 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 51 {ENDIF} 2010-Nov-03 23:08:56 LOG4 exec_msg: From OBSERVER: store_command_file_line 26 54 {IF LSTSLEW(AGES33PP_p3_155) < 021038 THEN} 2010-Nov-03 23:08:56 LOG4 exec_msg: From OBSERVER: store_command_file_line 27 55 {FIXEDDRIFT az=137.15 alfaangle=62.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_155 ra=12400.00 dec=284900.00} 2010-Nov-03 23:08:56 LOG4 exec_msg: From OBSERVER: store_command_file_line 28 58 {ENDIF} 2010-Nov-03 23:08:56 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Nov-03 23:08:56 LOG4 exec_msg: From OBSERVER: run_command_file 101103.cmd 1 1 28 2010-Nov-03 23:08:56 LOG4 run_command_file: Calling 'run_command_file 101103.cmd 1 1 28' 2010-Nov-03 23:08:56 BEGIN begin_task: Starting task 'running command file '101103.cmd'' 2010-Nov-03 23:08:56 LOG5 begin_task: Level: (1) ID = <10030> Status = 0 0 0 0 ok 2010-Nov-03 23:08:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '101103.cmd' ...} 2010-Nov-03 23:08:56 NOTE run_command_file: Starting execution of command file '101103.cmd' from line 1 2010-Nov-03 23:08:56 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_cima31.conf' 2010-Nov-03 23:08:56 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-Nov-03 23:08:56 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Nov-03 23:08:56 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-Nov-03 23:08:56 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima31.conf' 2010-Nov-03 23:08:56 LOG2 CIMA-antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84316 J 2010-Nov-03 23:08:56 LOG2 CIMA-antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 23:08:56 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 97736 2010 307 0.0 2010-Nov-03 23:08:56 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Nov-03 23:08:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Nov-03 23:08:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Nov-03 23:08:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Nov-03 23:08:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Nov-03 23:08:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Nov-03 23:08:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Nov-03 23:08:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Nov-03 23:08:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Nov-03 23:08:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Nov-03 23:08:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Nov-03 23:08:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Nov-03 23:08:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Nov-03 23:08:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Nov-03 23:08:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Nov-03 23:08:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Nov-03 23:08:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Nov-03 23:08:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Nov-03 23:08:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Nov-03 23:08:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Nov-03 23:08:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Nov-03 23:08:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Nov-03 23:08:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Nov-03 23:08:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Nov-03 23:08:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Nov-03 23:08:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Nov-03 23:08:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Nov-03 23:08:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Nov-03 23:08:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Nov-03 23:08:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Nov-03 23:08:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Nov-03 23:08:58 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Nov-03 23:08:58 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Nov-03 23:08:58 LOG5 begin_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2010-Nov-03 23:08:58 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Nov-03 23:08:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Nov-03 23:08:58 LOG1 config_iflo: Receiver ALFA already selected 2010-Nov-03 23:08:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Nov-03 23:08:58 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Nov-03 23:08:58 START begin_task: Starting task 'waiting on command to ALFA' 2010-Nov-03 23:08:58 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2010-Nov-03 23:08:58 LOG4 got_alfamon: From ALFAMON: ACK 2010-Nov-03 23:08:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Nov-03 23:08:58 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2010-Nov-03 23:08:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Nov-03 23:08:58 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Nov-03 23:08:58 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2010-Nov-03 23:08:58 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2010-Nov-03 23:08:58 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Nov-03 23:08:58 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Nov-03 23:08:58 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2010-Nov-03 23:08:58 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2010-Nov-03 23:08:58 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2010-Nov-03 23:08:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Nov-03 23:08:58 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2010-Nov-03 23:08:58 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2010-Nov-03 23:08:58 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Nov-03 23:08:58 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Nov-03 23:08:58 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Nov-03 23:08:58 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Nov-03 23:08:58 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Nov-03 23:08:58 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2010-Nov-03 23:08:58 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2010-Nov-03 23:08:58 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2010-Nov-03 23:08:58 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2010-Nov-03 23:08:58 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2010-Nov-03 23:08:58 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2010-Nov-03 23:08:58 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2010-Nov-03 23:08:58 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Nov-03 23:08:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:08:58 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2010-Nov-03 23:08:58 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2010-Nov-03 23:08:58 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Nov-03 23:08:58 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2010-Nov-03 23:08:58 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2010-Nov-03 23:08:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Nov-03 23:08:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 23:08:58 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Nov-03 23:08:58 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2010-Nov-03 23:08:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Nov-03 23:08:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:08:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 23:08:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:08:59 LOG4 got_cormsg: From DATATAKING: vw% DONE 2010-Nov-03 23:08:59 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Nov-03 23:08:59 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2010-Nov-03 23:08:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Nov-03 23:08:59 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Nov-03 23:08:59 LOG5 finish_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2010-Nov-03 23:08:59 DONE finish_task: DONE finished configuration: IF/LO path 2010-Nov-03 23:08:59 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 23:08:59 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Nov-03 23:08:59 LOG5 end_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2010-Nov-03 23:08:59 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Nov-03 23:08:59 LOG5 begin_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2010-Nov-03 23:08:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Nov-03 23:08:59 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Nov-03 23:08:59 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Nov-03 23:08:59 START begin_task: Starting task 'selecting calibration port' 2010-Nov-03 23:08:59 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-Nov-03 23:08:59 LOG3 vw_send: To DATATAKING: calport 3 2010-Nov-03 23:08:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Nov-03 23:08:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 23:08:59 START begin_task: Starting task 'waiting on calport' 2010-Nov-03 23:08:59 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2010-Nov-03 23:08:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:08:59 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Nov-03 23:08:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 23:08:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:08:59 LOG4 got_cormsg: From DATATAKING: DONE 2010-Nov-03 23:08:59 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Nov-03 23:08:59 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2010-Nov-03 23:08:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Nov-03 23:08:59 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Nov-03 23:08:59 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-Nov-03 23:08:59 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Nov-03 23:08:59 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Nov-03 23:08:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Nov-03 23:08:59 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2010-Nov-03 23:08:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:08:59 LOG3 CALCONTROL-caltrig: Software trigger 2010-Nov-03 23:08:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Nov-03 23:08:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Nov-03 23:08:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Nov-03 23:08:59 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2010-Nov-03 23:08:59 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Nov-03 23:08:59 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Nov-03 23:08:59 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Nov-03 23:08:59 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Nov-03 23:08:59 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Nov-03 23:08:59 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Nov-03 23:08:59 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Nov-03 23:08:59 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Nov-03 23:08:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 J. Hernandez 2010-Nov-03 23:08:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 J. Hernandez 2010-Nov-03 23:09:00 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 J. Hernandez 2010-Nov-03 23:09:00 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 J. Hernandez 2010-Nov-03 23:09:00 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Nov-03 23:09:00 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Nov-03 23:09:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Nov-03 23:09:00 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2010-Nov-03 23:09:00 LOG3 CALCONTROL-caltrig: Software trigger 2010-Nov-03 23:09:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Nov-03 23:09:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Nov-03 23:09:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Nov-03 23:09:00 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2010-Nov-03 23:09:00 LOG3 sock_errsend: To WAPPDATA: FLUSH 2010-Nov-03 23:09:00 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Nov-03 23:09:00 LOG5 finish_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2010-Nov-03 23:09:00 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Nov-03 23:09:00 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 23:09:00 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Nov-03 23:09:00 LOG5 end_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2010-Nov-03 23:09:00 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2010-Nov-03 23:09:00 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2010-Nov-03 23:09:00 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2010-Nov-03 23:09:00 LOG3 is_if_valid: Current source data: down 456.0 41.4 1180 - - 1345 2.7 2010-Nov-03 23:09:00 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2010-Nov-03 23:09:00 INFO5 is_if_valid: Condition parsed as: 0 2010-Nov-03 23:09:00 INFO1 is_if_valid: Skipping line 'IF isup(galfasrc) then' 2010-Nov-03 23:09:00 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2010-Nov-03 23:09:00 INFO1 run_command_line: Skipping line 'GOTO galfasrc' in non-true conditional branch 2010-Nov-03 23:09:00 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2010-Nov-03 23:09:00 LOG3 is_if_valid: Current source data: up 520.5 13.2 UP - - 47 0.0 2010-Nov-03 23:09:00 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc2) 2010-Nov-03 23:09:00 INFO5 is_if_valid: Condition parsed as: 1 2010-Nov-03 23:09:00 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2010-Nov-03 23:09:00 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc2 nooffset nowait' 2010-Nov-03 23:09:00 BEGIN begin_task: Starting task 'tracking source 'galfasrc2'' 2010-Nov-03 23:09:00 LOG5 begin_task: Level: (2) ID = <10039> Status = 0 0 0 0 ok 2010-Nov-03 23:09:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc2' ...} 2010-Nov-03 23:09:00 LOG3 track_source: Calling 'track_source galfasrc2 011400.0 +304000 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2010-Nov-03 23:09:00 START begin_task: Starting task 'sending tracking commands' 2010-Nov-03 23:09:00 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2010-Nov-03 23:09:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc2} INFO {Slewing to source 'galfasrc2' ...} 2010-Nov-03 23:09:00 INFO1 track_source: Starting to track galfasrc2 2010-Nov-03 23:09:00 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc2" 2010-Nov-03 23:09:00 LOG3 vw_send: To DATATAKING: set ra 011400.0 2010-Nov-03 23:09:00 LOG3 vw_send: To DATATAKING: set dec +304000 2010-Nov-03 23:09:01 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Nov-03 23:09:01 LOG3 vw_send: To DATATAKING: pnt tr 011400.0 +304000 -CJ 2010-Nov-03 23:09:01 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Nov-03 23:09:01 STOP finish_task: Finishing task 'sending tracking commands' 2010-Nov-03 23:09:01 LOG5 finish_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2010-Nov-03 23:09:01 INFO2 finish_task: DONE finished sending: tracking commands 2010-Nov-03 23:09:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Nov-03 23:09:01 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Nov-03 23:09:01 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2010-Nov-03 23:09:01 STOP finish_task: Finishing task 'tracking source 'galfasrc2'' 2010-Nov-03 23:09:01 LOG5 finish_task: Level: (2) ID = <10039> Status = 0 0 0 0 ok 2010-Nov-03 23:09:01 DONE finish_task: DONE finished tracking: source 'galfasrc2' 2010-Nov-03 23:09:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 23:09:01 END end_task: Finishing task 'tracking source 'galfasrc2'' with status 'OK' 2010-Nov-03 23:09:01 LOG5 end_task: Level: (2) ID = <10039> Status = 0 0 0 0 ok 2010-Nov-03 23:09:01 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2010-Nov-03 23:09:01 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2010-Nov-03 23:09:01 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2010-Nov-03 23:09:01 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2010-Nov-03 23:09:01 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2010-Nov-03 23:09:01 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2010-Nov-03 23:09:01 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2010-Nov-03 23:09:01 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2010-Nov-03 23:09:01 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2010-Nov-03 23:09:01 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Nov-03 23:09:01 LOG5 begin_task: Level: (2) ID = <10041> Status = 0 0 0 0 ok 2010-Nov-03 23:09:01 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Nov-03 23:09:01 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Nov-03 23:09:01 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2010-Nov-03 23:09:01 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Nov-03 23:09:01 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Nov-03 23:09:01 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2010-Nov-03 23:09:01 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Nov-03 23:09:01 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc2" 2010-Nov-03 23:09:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Nov-03 23:09:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Nov-03 23:09:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 J. Hernandez' 2010-Nov-03 23:09:01 LOG4 got_cormsg: From DATATAKING: set ra 011400.0 2010-Nov-03 23:09:01 LOG4 got_cormsg: From DATATAKING: set dec +304000 2010-Nov-03 23:09:01 LOG4 got_cormsg: From DATATAKING: vw% 011400.0 2010-Nov-03 23:09:01 LOG4 got_cormsg: From DATATAKING: vw% +304000 2010-Nov-03 23:09:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:09:01 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Nov-03 23:09:01 LOG4 got_cormsg: From DATATAKING: pnt tr 011400.0 +304000 -CJ 2010-Nov-03 23:09:01 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Nov-03 23:09:01 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Nov-03 23:09:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:09:02 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Nov-03 23:09:02 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-Nov-03 23:09:02 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Nov-03 23:09:02 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2010-Nov-03 23:09:02 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Nov-03 23:09:02 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Nov-03 23:09:02 LOG5 finish_task: Level: (2) ID = <10041> Status = 0 0 0 0 ok 2010-Nov-03 23:09:02 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-Nov-03 23:09:02 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 23:09:02 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-Nov-03 23:09:02 LOG5 end_task: Level: (2) ID = <10041> Status = 0 0 0 0 ok 2010-Nov-03 23:09:02 COMMAND run_command_line: EXECUTING command 16: 'WAITTRACK' 2010-Nov-03 23:09:02 BEGIN begin_task: Starting task 'waiting on telescope' 2010-Nov-03 23:09:02 LOG5 begin_task: Level: (2) ID = <10043> Status = 0 0 0 0 ok 2010-Nov-03 23:09:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Nov-03 23:09:02 LOG3 waittrk: Start waittrk 5 2010-Nov-03 23:09:02 START begin_task: Starting task 'waiting on telescope movement' 2010-Nov-03 23:09:02 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2010-Nov-03 23:09:07 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Nov-03 23:09:07 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2010-Nov-03 23:09:07 START begin_task: Starting task 'waiting on telescope on source' 2010-Nov-03 23:09:07 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2010-Nov-03 23:09:08 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Nov-03 23:09:08 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2010-Nov-03 23:09:08 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Nov-03 23:09:08 INFO2 waittrk: Now tracking galfasrc2 2010-Nov-03 23:09:08 LOG4 waittrk: Current telescope position: Az = 520.07 ZA = 13.25 2010-Nov-03 23:09:08 STOP finish_task: Finishing task 'waiting on telescope' 2010-Nov-03 23:09:08 LOG5 finish_task: Level: (2) ID = <10043> Status = 0 0 0 0 ok 2010-Nov-03 23:09:08 DONE finish_task: DONE finished waiting: telescope on source 2010-Nov-03 23:09:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 23:09:09 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Nov-03 23:09:09 LOG5 end_task: Level: (2) ID = <10043> Status = 0 0 0 0 ok 2010-Nov-03 23:09:09 COMMAND run_command_line: EXECUTING command 20: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2010-Nov-03 23:09:09 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2010-Nov-03 23:09:09 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Nov-03 23:09:09 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2010-Nov-03 23:09:09 BEGIN begin_task: Starting task 'smart frequency switching' 2010-Nov-03 23:09:09 LOG5 begin_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2010-Nov-03 23:09:09 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc2' 2010-Nov-03 23:09:09 INFO1 smartfreq: Starting pattern: Smart frequency switching 2010-Nov-03 23:09:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2010-Nov-03 23:09:09 START begin_task: Starting task 'selecting calibration type' 2010-Nov-03 23:09:09 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2010-Nov-03 23:09:09 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Nov-03 23:09:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Nov-03 23:09:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 23:09:09 START begin_task: Starting task 'waiting on setcal' 2010-Nov-03 23:09:09 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2010-Nov-03 23:09:09 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Nov-03 23:09:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 23:09:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:09:09 LOG4 got_cormsg: From DATATAKING: DONE 2010-Nov-03 23:09:09 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Nov-03 23:09:09 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2010-Nov-03 23:09:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Nov-03 23:09:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Nov-03 23:09:09 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Nov-03 23:09:09 START begin_task: Starting task 'waiting on command to ALFA' 2010-Nov-03 23:09:09 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2010-Nov-03 23:09:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:09:09 LOG4 got_alfamon: From ALFAMON: ACK 2010-Nov-03 23:09:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Nov-03 23:09:09 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2010-Nov-03 23:09:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Nov-03 23:09:09 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Nov-03 23:09:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Nov-03 23:09:10 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Nov-03 23:09:10 START begin_task: Starting task 'waiting on command to ALFA' 2010-Nov-03 23:09:10 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2010-Nov-03 23:09:10 LOG4 got_alfamon: From ALFAMON: ACK 2010-Nov-03 23:09:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Nov-03 23:09:10 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2010-Nov-03 23:09:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Nov-03 23:09:10 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Nov-03 23:09:10 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Nov-03 23:09:10 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2010-Nov-03 23:09:10 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 J. Hernandez 2010-Nov-03 23:09:10 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 J. Hernandez 2010-Nov-03 23:09:10 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 J. Hernandez 2010-Nov-03 23:09:10 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 J. Hernandez 2010-Nov-03 23:09:10 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20101103.a2048.0002.fits' is empty! 2010-Nov-03 23:09:10 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2010-Nov-03 23:09:10 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-Nov-03 23:09:10 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-Nov-03 23:09:10 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Nov-03 23:09:10 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Nov-03 23:09:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Nov-03 23:09:10 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2010-Nov-03 23:09:10 LOG3 CALCONTROL-caltrig: Software trigger 2010-Nov-03 23:09:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Nov-03 23:09:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Nov-03 23:09:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Nov-03 23:09:10 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2010-Nov-03 23:09:10 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-Nov-03 23:09:10 START begin_task: Starting task 'adjusting WAPP power' 2010-Nov-03 23:09:10 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2010-Nov-03 23:09:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Nov-03 23:09:10 INFO2 adjust_power: Starting to adjust WAPP power 2010-Nov-03 23:09:10 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Nov-03 23:09:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Nov-03 23:09:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 23:09:10 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Nov-03 23:09:10 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2010-Nov-03 23:09:10 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Nov-03 23:09:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 23:09:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 J. Hernandez' 2010-Nov-03 23:09:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:09:13 LOG4 got_cormsg: From DATATAKING: DONE 2010-Nov-03 23:09:13 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Nov-03 23:09:13 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2010-Nov-03 23:09:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Nov-03 23:09:13 START begin_task: Starting task 'adjusting WAPP power' 2010-Nov-03 23:09:13 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2010-Nov-03 23:09:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Nov-03 23:09:13 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Nov-03 23:09:13 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Nov-03 23:09:13 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Nov-03 23:09:13 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Nov-03 23:09:13 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Nov-03 23:09:13 LOG5 begin_task: Level: (5) ID = <10055> Status = 0 0 0 0 ok 2010-Nov-03 23:09:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Nov-03 23:09:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:09:14 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-Nov-03 23:09:14 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 4 dB 2010-Nov-03 23:09:14 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 3 3 dB 2010-Nov-03 23:09:14 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-Nov-03 23:09:14 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Nov-03 23:09:14 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Nov-03 23:09:14 LOG5 end_task: Level: (5) ID = <10055> Status = 0 0 0 0 ok 2010-Nov-03 23:09:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.964 0.986 ALFA beam 1: 1.033 1.120 2010-Nov-03 23:09:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.053 1.015 ALFA beam 3: 1.114 0.999 2010-Nov-03 23:09:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.109 0.846 ALFA beam 5: 1.039 0.966 2010-Nov-03 23:09:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.997 0.101 ALFA beam 7: 1.086 0.120 2010-Nov-03 23:09:14 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Nov-03 23:09:14 LOG5 finish_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2010-Nov-03 23:09:14 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Nov-03 23:09:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Nov-03 23:09:14 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Nov-03 23:09:14 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2010-Nov-03 23:09:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Nov-03 23:09:14 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Nov-03 23:09:14 LOG5 finish_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2010-Nov-03 23:09:14 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Nov-03 23:09:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Nov-03 23:09:14 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Nov-03 23:09:14 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2010-Nov-03 23:09:14 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2010-Nov-03 23:09:14 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2010-Nov-03 23:09:14 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2010-Nov-03 23:09:14 LOG5 antvel: Calling 'antvel 11400.000000 304000.000000 J Topocentric 0' 2010-Nov-03 23:09:14 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84316 J 2010-Nov-03 23:09:14 LOG2 antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 23:09:14 LOG2 antvel: Parameters to Doppler: Topocentric 97753 2010 307 0.0 2010-Nov-03 23:09:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 23:09:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2010-Nov-03 23:09:14 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2010-Nov-03 23:09:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Nov-03 23:09:14 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Nov-03 23:09:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Nov-03 23:09:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:09:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2010-Nov-03 23:09:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Nov-03 23:09:14 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2010-Nov-03 23:09:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2010-Nov-03 23:09:14 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.666666666666668 1.587436 2010.8431614888332 18.999933 2010-Nov-03 23:09:14 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333336 30.666666666666682 2010-Nov-03 23:09:14 LOG4 log_alfabeam: ALFABEAM 1 1.237605411049655 30.575976815779853 2010-Nov-03 23:09:14 LOG4 log_alfabeam: ALFABEAM 2 1.240544297673617 30.666352795727430 2010-Nov-03 23:09:14 LOG4 log_alfabeam: ALFABEAM 3 1.236300546003682 30.757312217725566 2010-Nov-03 23:09:14 LOG4 log_alfabeam: ALFABEAM 4 1.229034371085644 30.757202599124405 2010-Nov-03 23:09:14 LOG4 log_alfabeam: ALFABEAM 5 1.226106390656721 30.666209696983600 2010-Nov-03 23:09:14 LOG4 log_alfabeam: ALFABEAM 6 1.230433408772724 30.575946309665706 2010-Nov-03 23:09:14 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 30700001 2010-Nov-03 23:09:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Nov-03 23:09:15 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2010-Nov-03 23:09:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Nov-03 23:09:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Nov-03 23:09:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:09:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:09:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:09:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2010-Nov-03 23:09:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11356.00 2010-Nov-03 23:09:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Nov-03 23:09:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:09:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:09:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:09:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:09:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:09:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:09:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:09:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:09:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2010-Nov-03 23:09:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.964 0.986 1.033 1.120 2010-Nov-03 23:09:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 1.051 1.218 1.037 2010-Nov-03 23:09:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.109 0.846 1.039 0.966 2010-Nov-03 23:09:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.103 1.121 0.122 2010-Nov-03 23:09:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:09:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.216 (still bad) 2010-Nov-03 23:09:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:09:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:09:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.216 (still bad) 2010-Nov-03 23:09:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:09:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:09:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:09:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:09:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:09:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.221 (still bad) 2010-Nov-03 23:09:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.219 (still bad) 2010-Nov-03 23:09:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Nov-03 23:09:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Nov-03 23:09:26 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2010-Nov-03 23:09:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Nov-03 23:09:26 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2010-Nov-03 23:09:26 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2010-Nov-03 23:09:26 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2010-Nov-03 23:09:26 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2010-Nov-03 23:09:26 LOG5 antvel: Calling 'antvel 11400.000000 304000.000000 J Topocentric 0' 2010-Nov-03 23:09:26 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84316 J 2010-Nov-03 23:09:26 LOG2 antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 23:09:26 LOG2 antvel: Parameters to Doppler: Topocentric 97766 2010 307 0.0 2010-Nov-03 23:09:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 23:09:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2010-Nov-03 23:09:26 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2010-Nov-03 23:09:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Nov-03 23:09:26 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Nov-03 23:09:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Nov-03 23:09:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:09:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2010-Nov-03 23:09:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Nov-03 23:09:26 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2010-Nov-03 23:09:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2010-Nov-03 23:09:26 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.666666666666668 1.591057 2010.8431619007783 18.999933 2010-Nov-03 23:09:26 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333331 30.666666666666668 2010-Nov-03 23:09:26 LOG4 log_alfabeam: ALFABEAM 1 1.237631358501169 30.576181274126622 2010-Nov-03 23:09:26 LOG4 log_alfabeam: ALFABEAM 2 1.240544362191909 30.666697187936425 2010-Nov-03 23:09:26 LOG4 log_alfabeam: ALFABEAM 3 1.236274490226331 30.757453159872323 2010-Nov-03 23:09:26 LOG4 log_alfabeam: ALFABEAM 4 1.229008454226885 30.756997027387900 2010-Nov-03 23:09:26 LOG4 log_alfabeam: ALFABEAM 5 1.226106594458869 30.665865482634757 2010-Nov-03 23:09:26 LOG4 log_alfabeam: ALFABEAM 6 1.230459356229853 30.575808654384467 2010-Nov-03 23:09:26 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 30700002 2010-Nov-03 23:09:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Nov-03 23:09:27 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2010-Nov-03 23:09:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Nov-03 23:09:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Nov-03 23:09:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:09:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:09:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.219 (still bad) 2010-Nov-03 23:09:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2010-Nov-03 23:09:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11368.00 2010-Nov-03 23:09:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Nov-03 23:09:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:09:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:09:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:09:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:09:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:09:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:09:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:09:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.170 (still bad) 2010-Nov-03 23:09:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:09:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.145 (still bad) 2010-Nov-03 23:09:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:09:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.145 (still bad) 2010-Nov-03 23:09:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:09:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.147 (still bad) 2010-Nov-03 23:09:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.142 (still bad) 2010-Nov-03 23:09:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:09:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Nov-03 23:09:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Nov-03 23:09:38 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2010-Nov-03 23:09:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Nov-03 23:09:38 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2010-Nov-03 23:09:38 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2010-Nov-03 23:09:38 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2010-Nov-03 23:09:38 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2010-Nov-03 23:09:38 LOG5 antvel: Calling 'antvel 11400.000000 304000.000000 J Topocentric 0' 2010-Nov-03 23:09:38 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84316 J 2010-Nov-03 23:09:38 LOG2 antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 23:09:38 LOG2 antvel: Parameters to Doppler: Topocentric 97778 2010 307 0.0 2010-Nov-03 23:09:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 23:09:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2010-Nov-03 23:09:38 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2010-Nov-03 23:09:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Nov-03 23:09:38 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Nov-03 23:09:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Nov-03 23:09:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:09:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2010-Nov-03 23:09:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Nov-03 23:09:38 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2010-Nov-03 23:09:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2010-Nov-03 23:09:38 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.666666666666668 1.594400 2010.8431622810353 18.999933 2010-Nov-03 23:09:38 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333341 30.666666666666664 2010-Nov-03 23:09:38 LOG4 log_alfabeam: ALFABEAM 1 1.237655204603534 30.576370677007422 2010-Nov-03 23:09:38 LOG4 log_alfabeam: ALFABEAM 2 1.240544334294098 30.667014381314502 2010-Nov-03 23:09:38 LOG4 log_alfabeam: ALFABEAM 3 1.236250456588954 30.757581867272290 2010-Nov-03 23:09:38 LOG4 log_alfabeam: ALFABEAM 4 1.228984637037820 30.756806602811270 2010-Nov-03 23:09:38 LOG4 log_alfabeam: ALFABEAM 5 1.226106869367442 30.665548472760392 2010-Nov-03 23:09:38 LOG4 log_alfabeam: ALFABEAM 6 1.230483288377138 30.575682966646340 2010-Nov-03 23:09:38 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 30700003 2010-Nov-03 23:09:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Nov-03 23:09:39 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2010-Nov-03 23:09:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Nov-03 23:09:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Nov-03 23:09:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:09:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:09:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:09:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2010-Nov-03 23:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.143 (still bad) 2010-Nov-03 23:09:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11380.00 2010-Nov-03 23:09:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Nov-03 23:09:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:09:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:09:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:09:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:09:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:09:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:09:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:09:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:09:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2010-Nov-03 23:09:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2010-Nov-03 23:09:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2010-Nov-03 23:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.146 (still bad) 2010-Nov-03 23:09:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:09:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:09:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.141 (still bad) 2010-Nov-03 23:09:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Nov-03 23:09:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Nov-03 23:09:50 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2010-Nov-03 23:09:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Nov-03 23:09:50 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2010-Nov-03 23:09:50 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2010-Nov-03 23:09:50 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2010-Nov-03 23:09:50 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2010-Nov-03 23:09:50 LOG5 antvel: Calling 'antvel 11400.000000 304000.000000 J Topocentric 0' 2010-Nov-03 23:09:50 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84316 J 2010-Nov-03 23:09:50 LOG2 antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 23:09:50 LOG2 antvel: Parameters to Doppler: Topocentric 97790 2010 307 0.0 2010-Nov-03 23:09:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 23:09:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2010-Nov-03 23:09:50 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2010-Nov-03 23:09:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Nov-03 23:09:50 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Nov-03 23:09:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Nov-03 23:09:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:09:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2010-Nov-03 23:09:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Nov-03 23:09:50 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2010-Nov-03 23:09:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2010-Nov-03 23:09:50 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.666666666666668 1.597742 2010.8431626612924 18.999933 2010-Nov-03 23:09:50 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333336 30.666666666666668 2010-Nov-03 23:09:50 LOG4 log_alfabeam: ALFABEAM 1 1.237678938538453 30.576560627220875 2010-Nov-03 23:09:50 LOG4 log_alfabeam: ALFABEAM 2 1.240544223064975 30.667330744768279 2010-Nov-03 23:09:50 LOG4 log_alfabeam: ALFABEAM 3 1.236226451787212 30.757709183765016 2010-Nov-03 23:09:50 LOG4 log_alfabeam: ALFABEAM 4 1.228960932643097 30.756615637201907 2010-Nov-03 23:09:50 LOG4 log_alfabeam: ALFABEAM 5 1.226107226839337 30.665232311125155 2010-Nov-03 23:09:50 LOG4 log_alfabeam: ALFABEAM 6 1.230507190311004 30.575558654539201 2010-Nov-03 23:09:50 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 30700004 2010-Nov-03 23:09:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Nov-03 23:09:51 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2010-Nov-03 23:09:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Nov-03 23:09:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Nov-03 23:09:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:09:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:09:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:09:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2010-Nov-03 23:09:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11392.00 2010-Nov-03 23:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2010-Nov-03 23:09:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Nov-03 23:09:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:09:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:09:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:09:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:09:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:09:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:09:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:09:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:09:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2010-Nov-03 23:09:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2010-Nov-03 23:09:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2010-Nov-03 23:09:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:09:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2010-Nov-03 23:10:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2010-Nov-03 23:10:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Nov-03 23:10:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Nov-03 23:10:02 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2010-Nov-03 23:10:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Nov-03 23:10:02 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2010-Nov-03 23:10:02 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2010-Nov-03 23:10:02 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2010-Nov-03 23:10:02 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2010-Nov-03 23:10:02 LOG5 antvel: Calling 'antvel 11400.000000 304000.000000 J Topocentric 0' 2010-Nov-03 23:10:02 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84316 J 2010-Nov-03 23:10:02 LOG2 antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 23:10:02 LOG2 antvel: Parameters to Doppler: Topocentric 97802 2010 307 0.0 2010-Nov-03 23:10:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 23:10:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2010-Nov-03 23:10:02 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2010-Nov-03 23:10:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Nov-03 23:10:02 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Nov-03 23:10:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Nov-03 23:10:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:10:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2010-Nov-03 23:10:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Nov-03 23:10:02 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2010-Nov-03 23:10:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2010-Nov-03 23:10:02 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.666666666666668 1.601085 2010.8431630415494 18.999933 2010-Nov-03 23:10:02 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333334 30.666666666666661 2010-Nov-03 23:10:02 LOG4 log_alfabeam: ALFABEAM 1 1.237702574333574 30.576751226980932 2010-Nov-03 23:10:02 LOG4 log_alfabeam: ALFABEAM 2 1.240544029019400 30.667646460643834 2010-Nov-03 23:10:02 LOG4 log_alfabeam: ALFABEAM 3 1.236202462224658 30.757835190055452 2010-Nov-03 23:10:02 LOG4 log_alfabeam: ALFABEAM 4 1.228937327026246 30.756424027767061 2010-Nov-03 23:10:02 LOG4 log_alfabeam: ALFABEAM 5 1.226107666494573 30.664916815356143 2010-Nov-03 23:10:02 LOG4 log_alfabeam: ALFABEAM 6 1.230531075583945 30.575435639046198 2010-Nov-03 23:10:02 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 30700005 2010-Nov-03 23:10:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Nov-03 23:10:03 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2010-Nov-03 23:10:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Nov-03 23:10:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Nov-03 23:10:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:10:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:10:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:10:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2010-Nov-03 23:10:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11404.00 2010-Nov-03 23:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2010-Nov-03 23:10:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Nov-03 23:10:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:10:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:10:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:10:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:10:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:10:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:10:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:10:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:10:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2010-Nov-03 23:10:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.125 (still bad) 2010-Nov-03 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2010-Nov-03 23:10:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2010-Nov-03 23:10:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Nov-03 23:10:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Nov-03 23:10:14 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2010-Nov-03 23:10:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Nov-03 23:10:14 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2010-Nov-03 23:10:14 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2010-Nov-03 23:10:14 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2010-Nov-03 23:10:14 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2010-Nov-03 23:10:14 LOG5 antvel: Calling 'antvel 11400.000000 304000.000000 J Topocentric 0' 2010-Nov-03 23:10:14 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84316 J 2010-Nov-03 23:10:14 LOG2 antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 23:10:14 LOG2 antvel: Parameters to Doppler: Topocentric 97814 2010 307 0.0 2010-Nov-03 23:10:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 23:10:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2010-Nov-03 23:10:14 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2010-Nov-03 23:10:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Nov-03 23:10:14 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Nov-03 23:10:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Nov-03 23:10:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:10:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2010-Nov-03 23:10:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Nov-03 23:10:14 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2010-Nov-03 23:10:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2010-Nov-03 23:10:14 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.666666666666668 1.604427 2010.8431634218066 18.999933 2010-Nov-03 23:10:14 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333336 30.666666666666664 2010-Nov-03 23:10:14 LOG4 log_alfabeam: ALFABEAM 1 1.237726097684094 30.576942350840994 2010-Nov-03 23:10:14 LOG4 log_alfabeam: ALFABEAM 2 1.240543752857674 30.667961333210084 2010-Nov-03 23:10:14 LOG4 log_alfabeam: ALFABEAM 3 1.236178503013659 30.757959815360550 2010-Nov-03 23:10:14 LOG4 log_alfabeam: ALFABEAM 4 1.228913834467461 30.756231900585288 2010-Nov-03 23:10:14 LOG4 log_alfabeam: ALFABEAM 5 1.226108187473577 30.664602180904353 2010-Nov-03 23:10:14 LOG4 log_alfabeam: ALFABEAM 6 1.230554929163568 30.575313989054639 2010-Nov-03 23:10:14 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 30700006 2010-Nov-03 23:10:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Nov-03 23:10:15 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2010-Nov-03 23:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.125 (still bad) 2010-Nov-03 23:10:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Nov-03 23:10:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Nov-03 23:10:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:10:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:10:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:10:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2010-Nov-03 23:10:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11416.00 2010-Nov-03 23:10:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Nov-03 23:10:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:10:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:10:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:10:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:10:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:10:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:10:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.125 (still bad) 2010-Nov-03 23:10:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:10:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2010-Nov-03 23:10:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.962 0.990 1.029 1.124 2010-Nov-03 23:10:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.051 1.018 1.129 0.999 2010-Nov-03 23:10:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.102 0.847 1.033 0.968 2010-Nov-03 23:10:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.995 0.101 1.083 0.120 2010-Nov-03 23:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2010-Nov-03 23:10:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2010-Nov-03 23:10:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2010-Nov-03 23:10:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Nov-03 23:10:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Nov-03 23:10:26 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2010-Nov-03 23:10:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Nov-03 23:10:26 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2010-Nov-03 23:10:26 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2010-Nov-03 23:10:26 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2010-Nov-03 23:10:26 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2010-Nov-03 23:10:26 LOG5 antvel: Calling 'antvel 11400.000000 304000.000000 J Topocentric 0' 2010-Nov-03 23:10:26 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84316 J 2010-Nov-03 23:10:26 LOG2 antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 23:10:26 LOG2 antvel: Parameters to Doppler: Topocentric 97826 2010 307 0.0 2010-Nov-03 23:10:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 23:10:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2010-Nov-03 23:10:26 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2010-Nov-03 23:10:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Nov-03 23:10:26 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Nov-03 23:10:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Nov-03 23:10:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:10:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2010-Nov-03 23:10:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Nov-03 23:10:26 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2010-Nov-03 23:10:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2010-Nov-03 23:10:26 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.666666666666668 1.607770 2010.8431638020636 18.999933 2010-Nov-03 23:10:26 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333337 30.666666666666682 2010-Nov-03 23:10:26 LOG4 log_alfabeam: ALFABEAM 1 1.237749522514298 30.577134101796073 2010-Nov-03 23:10:26 LOG4 log_alfabeam: ALFABEAM 2 1.240543395001868 30.668275544176087 2010-Nov-03 23:10:26 LOG4 log_alfabeam: ALFABEAM 3 1.236154560568042 30.758083138954284 2010-Nov-03 23:10:26 LOG4 log_alfabeam: ALFABEAM 4 1.228890441054238 30.756039152087777 2010-Nov-03 23:10:26 LOG4 log_alfabeam: ALFABEAM 5 1.226108789488643 30.664288226053593 2010-Nov-03 23:10:26 LOG4 log_alfabeam: ALFABEAM 6 1.230578764590401 30.575193626967586 2010-Nov-03 23:10:26 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 30700007 2010-Nov-03 23:10:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Nov-03 23:10:27 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2010-Nov-03 23:10:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Nov-03 23:10:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Nov-03 23:10:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:10:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:10:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2010-Nov-03 23:10:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2010-Nov-03 23:10:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11428.00 2010-Nov-03 23:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Nov-03 23:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2010-Nov-03 23:10:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.134 (still bad) 2010-Nov-03 23:10:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.133 (still bad) 2010-Nov-03 23:10:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.142 (still bad) 2010-Nov-03 23:10:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.134 (still bad) 2010-Nov-03 23:10:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:38 INFO1 WAPP=1+2+3-start_spectra: DONE with spectral line observation 2010-Nov-03 23:10:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Nov-03 23:10:38 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2010-Nov-03 23:10:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Nov-03 23:10:38 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2010-Nov-03 23:10:38 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-Nov-03 23:10:38 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Nov-03 23:10:38 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Nov-03 23:10:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Nov-03 23:10:38 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2010-Nov-03 23:10:38 LOG3 CALCONTROL-caltrig: Software trigger 2010-Nov-03 23:10:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Nov-03 23:10:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Nov-03 23:10:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Nov-03 23:10:38 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2010-Nov-03 23:10:38 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2010-Nov-03 23:10:38 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2010-Nov-03 23:10:38 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2010-Nov-03 23:10:38 LOG5 antvel: Calling 'antvel 11400.000000 304000.000000 J Topocentric 0' 2010-Nov-03 23:10:38 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84316 J 2010-Nov-03 23:10:38 LOG2 antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 23:10:38 LOG2 antvel: Parameters to Doppler: Topocentric 97838 2010 307 0.0 2010-Nov-03 23:10:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 23:10:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2010-Nov-03 23:10:38 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2010-Nov-03 23:10:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Nov-03 23:10:38 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Nov-03 23:10:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Nov-03 23:10:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:10:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2010-Nov-03 23:10:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Nov-03 23:10:38 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2010-Nov-03 23:10:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2010-Nov-03 23:10:38 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.666666666666668 1.611112 2010.8431641823206 18.999933 2010-Nov-03 23:10:38 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333332 30.666666666666668 2010-Nov-03 23:10:38 LOG4 log_alfabeam: ALFABEAM 1 1.237772834668110 30.577326353792721 2010-Nov-03 23:10:38 LOG4 log_alfabeam: ALFABEAM 2 1.240542956255995 30.668588898965591 2010-Nov-03 23:10:38 LOG4 log_alfabeam: ALFABEAM 3 1.236130649955003 30.758205091834178 2010-Nov-03 23:10:38 LOG4 log_alfabeam: ALFABEAM 4 1.228867160917313 30.755845908950306 2010-Nov-03 23:10:38 LOG4 log_alfabeam: ALFABEAM 5 1.226109471577896 30.663975145076400 2010-Nov-03 23:10:39 LOG4 log_alfabeam: ALFABEAM 6 1.230602566878943 30.575074619915469 2010-Nov-03 23:10:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 30700008 2010-Nov-03 23:10:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Nov-03 23:10:39 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2010-Nov-03 23:10:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Nov-03 23:10:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Nov-03 23:10:39 INFO1 WAPP=4-start_spectra: DONE with spectral line observation 2010-Nov-03 23:10:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:10:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:10:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.134 (still bad) 2010-Nov-03 23:10:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2010-Nov-03 23:10:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11440.00 2010-Nov-03 23:10:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Nov-03 23:10:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:10:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:10:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:10:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:10:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:10:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:10:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:10:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.688 (still bad) 2010-Nov-03 23:10:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.682 (still bad) 2010-Nov-03 23:10:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.678 (still bad) 2010-Nov-03 23:10:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.694 (still bad) 2010-Nov-03 23:10:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.683 (still bad) 2010-Nov-03 23:10:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Nov-03 23:10:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Nov-03 23:10:50 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2010-Nov-03 23:10:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Nov-03 23:10:50 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2010-Nov-03 23:10:50 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2010-Nov-03 23:10:50 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2010-Nov-03 23:10:50 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2010-Nov-03 23:10:50 LOG5 antvel: Calling 'antvel 11400.000000 304000.000000 J Topocentric 0' 2010-Nov-03 23:10:50 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84316 J 2010-Nov-03 23:10:50 LOG2 antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 23:10:50 LOG2 antvel: Parameters to Doppler: Topocentric 97850 2010 307 0.0 2010-Nov-03 23:10:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 23:10:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2010-Nov-03 23:10:50 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2010-Nov-03 23:10:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Nov-03 23:10:50 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Nov-03 23:10:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Nov-03 23:10:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:10:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2010-Nov-03 23:10:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Nov-03 23:10:50 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2010-Nov-03 23:10:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2010-Nov-03 23:10:50 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.666666666666668 1.614455 2010.8431645625776 18.999933 2010-Nov-03 23:10:50 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333336 30.666666666666679 2010-Nov-03 23:10:50 LOG4 log_alfabeam: ALFABEAM 1 1.237796047965728 30.577519210586388 2010-Nov-03 23:10:50 LOG4 log_alfabeam: ALFABEAM 2 1.240542436950222 30.668901578633552 2010-Nov-03 23:10:50 LOG4 log_alfabeam: ALFABEAM 3 1.236106757600298 30.758325751846847 2010-Nov-03 23:10:50 LOG4 log_alfabeam: ALFABEAM 4 1.228843980248984 30.755652066848832 2010-Nov-03 23:10:50 LOG4 log_alfabeam: ALFABEAM 5 1.226110233545102 30.663662756930087 2010-Nov-03 23:10:50 LOG4 log_alfabeam: ALFABEAM 6 1.230626349556214 30.574956891717232 2010-Nov-03 23:10:50 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 30700009 2010-Nov-03 23:10:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Nov-03 23:10:51 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2010-Nov-03 23:10:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Nov-03 23:10:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Nov-03 23:10:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:10:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:10:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:10:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2010-Nov-03 23:10:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11452.00 2010-Nov-03 23:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.683 (still bad) 2010-Nov-03 23:10:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Nov-03 23:10:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:10:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:10:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:10:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:10:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:10:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:10:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:10:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:10:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.589 (still bad) 2010-Nov-03 23:10:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.584 (still bad) 2010-Nov-03 23:10:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.591 (still bad) 2010-Nov-03 23:10:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:10:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:10:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.599 (still bad) 2010-Nov-03 23:11:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.586 (still bad) 2010-Nov-03 23:11:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Nov-03 23:11:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Nov-03 23:11:02 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2010-Nov-03 23:11:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Nov-03 23:11:02 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2010-Nov-03 23:11:02 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2010-Nov-03 23:11:02 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2010-Nov-03 23:11:02 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2010-Nov-03 23:11:02 LOG5 antvel: Calling 'antvel 11400.000000 304000.000000 J Topocentric 0' 2010-Nov-03 23:11:02 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84316 J 2010-Nov-03 23:11:02 LOG2 antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 23:11:02 LOG2 antvel: Parameters to Doppler: Topocentric 97862 2010 307 0.0 2010-Nov-03 23:11:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 23:11:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2010-Nov-03 23:11:02 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2010-Nov-03 23:11:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Nov-03 23:11:02 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Nov-03 23:11:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Nov-03 23:11:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:11:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2010-Nov-03 23:11:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Nov-03 23:11:02 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2010-Nov-03 23:11:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2010-Nov-03 23:11:02 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.666666666666668 1.617797 2010.8431649428348 18.999933 2010-Nov-03 23:11:02 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333340 30.666666666666664 2010-Nov-03 23:11:02 LOG4 log_alfabeam: ALFABEAM 1 1.237819148399719 30.577712545550380 2010-Nov-03 23:11:02 LOG4 log_alfabeam: ALFABEAM 2 1.240541837990258 30.669213389773375 2010-Nov-03 23:11:02 LOG4 log_alfabeam: ALFABEAM 3 1.236082898523938 30.758445051751419 2010-Nov-03 23:11:02 LOG4 log_alfabeam: ALFABEAM 4 1.228820913030560 30.755457753022753 2010-Nov-03 23:11:02 LOG4 log_alfabeam: ALFABEAM 5 1.226111074327970 30.663351254694383 2010-Nov-03 23:11:02 LOG4 log_alfabeam: ALFABEAM 6 1.230650097685459 30.574840507765465 2010-Nov-03 23:11:02 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 30700010 2010-Nov-03 23:11:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Nov-03 23:11:03 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2010-Nov-03 23:11:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Nov-03 23:11:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Nov-03 23:11:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:11:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:11:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:11:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2010-Nov-03 23:11:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11464.00 2010-Nov-03 23:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.588 (still bad) 2010-Nov-03 23:11:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Nov-03 23:11:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:11:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:11:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:11:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:11:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:11:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:11:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:11:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:11:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.582 (still bad) 2010-Nov-03 23:11:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.579 (still bad) 2010-Nov-03 23:11:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.579 (still bad) 2010-Nov-03 23:11:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.593 (still bad) 2010-Nov-03 23:11:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.579 (still bad) 2010-Nov-03 23:11:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Nov-03 23:11:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Nov-03 23:11:14 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2010-Nov-03 23:11:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Nov-03 23:11:14 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2010-Nov-03 23:11:14 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2010-Nov-03 23:11:14 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2010-Nov-03 23:11:14 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2010-Nov-03 23:11:14 LOG5 antvel: Calling 'antvel 11400.000000 304000.000000 J Topocentric 0' 2010-Nov-03 23:11:14 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84317 J 2010-Nov-03 23:11:14 LOG2 antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 23:11:14 LOG2 antvel: Parameters to Doppler: Topocentric 97874 2010 307 0.0 2010-Nov-03 23:11:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 23:11:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2010-Nov-03 23:11:14 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2010-Nov-03 23:11:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Nov-03 23:11:14 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Nov-03 23:11:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Nov-03 23:11:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:11:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2010-Nov-03 23:11:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Nov-03 23:11:14 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2010-Nov-03 23:11:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2010-Nov-03 23:11:14 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.666666666666668 1.621140 2010.8431653230919 18.999933 2010-Nov-03 23:11:14 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333334 30.666666666666664 2010-Nov-03 23:11:14 LOG4 log_alfabeam: ALFABEAM 1 1.237842149685428 30.577906463179684 2010-Nov-03 23:11:14 LOG4 log_alfabeam: ALFABEAM 2 1.240541159615220 30.669524512769293 2010-Nov-03 23:11:14 LOG4 log_alfabeam: ALFABEAM 3 1.236059059165248 30.758563067971284 2010-Nov-03 23:11:14 LOG4 log_alfabeam: ALFABEAM 4 1.228797945559870 30.755262862413630 2010-Nov-03 23:11:14 LOG4 log_alfabeam: ALFABEAM 5 1.226111993820871 30.663040458016649 2010-Nov-03 23:11:14 LOG4 log_alfabeam: ALFABEAM 6 1.230673824778564 30.574725393290624 2010-Nov-03 23:11:14 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 30700011 2010-Nov-03 23:11:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Nov-03 23:11:15 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2010-Nov-03 23:11:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Nov-03 23:11:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Nov-03 23:11:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:11:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:11:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:11:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2010-Nov-03 23:11:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11476.00 2010-Nov-03 23:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.578 (still bad) 2010-Nov-03 23:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Nov-03 23:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:11:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.566 (still bad) 2010-Nov-03 23:11:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2010-Nov-03 23:11:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.324 1.338 1.382 1.497 2010-Nov-03 23:11:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.378 1.391 1.564 1.362 2010-Nov-03 23:11:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.511 1.152 1.413 1.271 2010-Nov-03 23:11:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.356 0.101 1.479 0.119 2010-Nov-03 23:11:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.564 (still bad) 2010-Nov-03 23:11:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.576 (still bad) 2010-Nov-03 23:11:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:26 INFO1 WAPP=1+2+3-start_spectra: DONE with spectral line observation 2010-Nov-03 23:11:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.565 (still bad) 2010-Nov-03 23:11:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Nov-03 23:11:26 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2010-Nov-03 23:11:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Nov-03 23:11:26 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2010-Nov-03 23:11:26 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2010-Nov-03 23:11:26 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2010-Nov-03 23:11:26 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2010-Nov-03 23:11:26 LOG5 antvel: Calling 'antvel 11400.000000 304000.000000 J Topocentric 0' 2010-Nov-03 23:11:26 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84317 J 2010-Nov-03 23:11:26 LOG2 antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 23:11:26 LOG2 antvel: Parameters to Doppler: Topocentric 97886 2010 307 0.0 2010-Nov-03 23:11:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 23:11:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2010-Nov-03 23:11:26 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2010-Nov-03 23:11:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Nov-03 23:11:26 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Nov-03 23:11:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Nov-03 23:11:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:11:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2010-Nov-03 23:11:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Nov-03 23:11:26 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2010-Nov-03 23:11:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2010-Nov-03 23:11:26 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.666666666666668 1.624482 2010.8431657033489 18.999933 2010-Nov-03 23:11:26 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333334 30.666666666666679 2010-Nov-03 23:11:26 LOG4 log_alfabeam: ALFABEAM 1 1.237865037963913 30.578100836307499 2010-Nov-03 23:11:26 LOG4 log_alfabeam: ALFABEAM 2 1.240540402830553 30.669834755398337 2010-Nov-03 23:11:26 LOG4 log_alfabeam: ALFABEAM 3 1.236035254495211 30.758679735007945 2010-Nov-03 23:11:26 LOG4 log_alfabeam: ALFABEAM 4 1.228775091668995 30.755067522791602 2010-Nov-03 23:11:26 LOG4 log_alfabeam: ALFABEAM 5 1.226112990863150 30.662730558770612 2010-Nov-03 23:11:26 LOG4 log_alfabeam: ALFABEAM 6 1.230697515949350 30.574611611967104 2010-Nov-03 23:11:26 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 30700012 2010-Nov-03 23:11:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Nov-03 23:11:27 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2010-Nov-03 23:11:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Nov-03 23:11:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Nov-03 23:11:27 INFO1 WAPP=4-start_spectra: DONE with spectral line observation 2010-Nov-03 23:11:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:11:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:11:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:11:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2010-Nov-03 23:11:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11488.00 2010-Nov-03 23:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.565 (still bad) 2010-Nov-03 23:11:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Nov-03 23:11:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:11:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:11:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:11:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:11:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:11:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:11:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:11:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:11:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.563 (still bad) 2010-Nov-03 23:11:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.559 (still bad) 2010-Nov-03 23:11:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.564 (still bad) 2010-Nov-03 23:11:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.563 (still bad) 2010-Nov-03 23:11:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Nov-03 23:11:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Nov-03 23:11:38 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2010-Nov-03 23:11:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Nov-03 23:11:38 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2010-Nov-03 23:11:38 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2010-Nov-03 23:11:38 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2010-Nov-03 23:11:38 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2010-Nov-03 23:11:38 LOG5 antvel: Calling 'antvel 11400.000000 304000.000000 J Topocentric 0' 2010-Nov-03 23:11:38 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84317 J 2010-Nov-03 23:11:38 LOG2 antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 23:11:38 LOG2 antvel: Parameters to Doppler: Topocentric 97898 2010 307 0.0 2010-Nov-03 23:11:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 23:11:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2010-Nov-03 23:11:38 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2010-Nov-03 23:11:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Nov-03 23:11:38 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Nov-03 23:11:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Nov-03 23:11:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:11:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2010-Nov-03 23:11:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Nov-03 23:11:38 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2010-Nov-03 23:11:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2010-Nov-03 23:11:38 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.666666666666668 1.627824 2010.8431660836059 18.999933 2010-Nov-03 23:11:38 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333347 30.666666666666679 2010-Nov-03 23:11:38 LOG4 log_alfabeam: ALFABEAM 1 1.237887820044057 30.578295711762429 2010-Nov-03 23:11:38 LOG4 log_alfabeam: ALFABEAM 2 1.240539568046643 30.670144204882824 2010-Nov-03 23:11:38 LOG4 log_alfabeam: ALFABEAM 3 1.236011478078480 30.758795093543451 2010-Nov-03 23:11:38 LOG4 log_alfabeam: ALFABEAM 4 1.228752344552409 30.754871687056106 2010-Nov-03 23:11:38 LOG4 log_alfabeam: ALFABEAM 5 1.226114065105928 30.662421469674076 2010-Nov-03 23:11:38 LOG4 log_alfabeam: ALFABEAM 6 1.230721177617402 30.574499123897830 2010-Nov-03 23:11:38 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 30700013 2010-Nov-03 23:11:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Nov-03 23:11:39 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2010-Nov-03 23:11:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Nov-03 23:11:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Nov-03 23:11:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.561 (still bad) 2010-Nov-03 23:11:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:11:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:11:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:11:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2010-Nov-03 23:11:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11500.00 2010-Nov-03 23:11:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Nov-03 23:11:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:11:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:11:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:11:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:11:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:11:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:11:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:11:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.562 (still bad) 2010-Nov-03 23:11:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.564 (still bad) 2010-Nov-03 23:11:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.561 (still bad) 2010-Nov-03 23:11:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.563 (still bad) 2010-Nov-03 23:11:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.564 (still bad) 2010-Nov-03 23:11:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Nov-03 23:11:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Nov-03 23:11:50 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2010-Nov-03 23:11:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Nov-03 23:11:50 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2010-Nov-03 23:11:50 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2010-Nov-03 23:11:50 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2010-Nov-03 23:11:50 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2010-Nov-03 23:11:50 LOG5 antvel: Calling 'antvel 11400.000000 304000.000000 J Topocentric 0' 2010-Nov-03 23:11:50 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84317 J 2010-Nov-03 23:11:50 LOG2 antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 23:11:50 LOG2 antvel: Parameters to Doppler: Topocentric 97910 2010 307 0.0 2010-Nov-03 23:11:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 23:11:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2010-Nov-03 23:11:50 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2010-Nov-03 23:11:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Nov-03 23:11:50 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Nov-03 23:11:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Nov-03 23:11:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:11:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2010-Nov-03 23:11:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Nov-03 23:11:50 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2010-Nov-03 23:11:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2010-Nov-03 23:11:50 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.666666666666668 1.631167 2010.8431664638629 18.999933 2010-Nov-03 23:11:50 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333332 30.666666666666668 2010-Nov-03 23:11:50 LOG4 log_alfabeam: ALFABEAM 1 1.237910502618157 30.578491137025317 2010-Nov-03 23:11:50 LOG4 log_alfabeam: ALFABEAM 2 1.240538655582426 30.670452947620927 2010-Nov-03 23:11:50 LOG4 log_alfabeam: ALFABEAM 3 1.235987723504756 30.758909182769461 2010-Nov-03 23:11:50 LOG4 log_alfabeam: ALFABEAM 4 1.228729697521790 30.754675307460833 2010-Nov-03 23:11:50 LOG4 log_alfabeam: ALFABEAM 5 1.226115216290940 30.662113104288775 2010-Nov-03 23:11:50 LOG4 log_alfabeam: ALFABEAM 6 1.230744816175671 30.574387890661079 2010-Nov-03 23:11:50 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 30700014 2010-Nov-03 23:11:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Nov-03 23:11:51 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2010-Nov-03 23:11:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Nov-03 23:11:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Nov-03 23:11:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:11:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:11:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.560 (still bad) 2010-Nov-03 23:11:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2010-Nov-03 23:11:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11512.00 2010-Nov-03 23:11:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Nov-03 23:11:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:11:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:11:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:11:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:11:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:11:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:11:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:11:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.560 (still bad) 2010-Nov-03 23:11:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.567 (still bad) 2010-Nov-03 23:11:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.566 (still bad) 2010-Nov-03 23:11:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.569 (still bad) 2010-Nov-03 23:11:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:11:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.570 (still bad) 2010-Nov-03 23:12:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Nov-03 23:12:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Nov-03 23:12:02 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2010-Nov-03 23:12:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Nov-03 23:12:02 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2010-Nov-03 23:12:02 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2010-Nov-03 23:12:02 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2010-Nov-03 23:12:02 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-Nov-03 23:12:02 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Nov-03 23:12:02 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Nov-03 23:12:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Nov-03 23:12:02 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2010-Nov-03 23:12:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:12:02 LOG3 CALCONTROL-caltrig: Software trigger 2010-Nov-03 23:12:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Nov-03 23:12:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Nov-03 23:12:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Nov-03 23:12:02 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2010-Nov-03 23:12:02 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-Nov-03 23:12:02 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2010-Nov-03 23:12:02 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2010-Nov-03 23:12:02 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2010-Nov-03 23:12:02 LOG5 antvel: Calling 'antvel 11400.000000 304000.000000 J Topocentric 0' 2010-Nov-03 23:12:02 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84317 J 2010-Nov-03 23:12:02 LOG2 antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 23:12:02 LOG2 antvel: Parameters to Doppler: Topocentric 97922 2010 307 0.0 2010-Nov-03 23:12:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 23:12:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2010-Nov-03 23:12:02 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2010-Nov-03 23:12:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Nov-03 23:12:02 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Nov-03 23:12:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Nov-03 23:12:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:12:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2010-Nov-03 23:12:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Nov-03 23:12:02 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2010-Nov-03 23:12:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2010-Nov-03 23:12:02 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.666666666666668 1.634509 2010.8431668441201 18.999933 2010-Nov-03 23:12:02 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333338 30.666666666666664 2010-Nov-03 23:12:02 LOG4 log_alfabeam: ALFABEAM 1 1.237933072049597 30.578686984179953 2010-Nov-03 23:12:02 LOG4 log_alfabeam: ALFABEAM 2 1.240537666589263 30.670760793189199 2010-Nov-03 23:12:02 LOG4 log_alfabeam: ALFABEAM 3 1.235964005668135 30.759021939763656 2010-Nov-03 23:12:02 LOG4 log_alfabeam: ALFABEAM 4 1.228707164185882 30.754478512510971 2010-Nov-03 23:12:02 LOG4 log_alfabeam: ALFABEAM 5 1.226116443113813 30.661805652656177 2010-Nov-03 23:12:02 LOG4 log_alfabeam: ALFABEAM 6 1.230768416817142 30.574277973391258 2010-Nov-03 23:12:02 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 30700015 2010-Nov-03 23:12:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Nov-03 23:12:03 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2010-Nov-03 23:12:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Nov-03 23:12:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Nov-03 23:12:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:12:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:12:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:12:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2010-Nov-03 23:12:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11524.00 2010-Nov-03 23:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.567 (still bad) 2010-Nov-03 23:12:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Nov-03 23:12:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:12:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:12:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:12:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:12:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:12:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:12:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:12:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:12:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.504 (still bad) 2010-Nov-03 23:12:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.219 (still bad) 2010-Nov-03 23:12:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:12:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.219 (still bad) 2010-Nov-03 23:12:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.229 (still bad) 2010-Nov-03 23:12:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.217 (still bad) 2010-Nov-03 23:12:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Nov-03 23:12:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Nov-03 23:12:14 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2010-Nov-03 23:12:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Nov-03 23:12:14 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2010-Nov-03 23:12:14 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2010-Nov-03 23:12:14 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2010-Nov-03 23:12:14 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2010-Nov-03 23:12:14 LOG5 antvel: Calling 'antvel 11400.000000 304000.000000 J Topocentric 0' 2010-Nov-03 23:12:14 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84317 J 2010-Nov-03 23:12:14 LOG2 antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 23:12:14 LOG2 antvel: Parameters to Doppler: Topocentric 97934 2010 307 0.0 2010-Nov-03 23:12:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 23:12:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2010-Nov-03 23:12:14 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2010-Nov-03 23:12:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Nov-03 23:12:14 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Nov-03 23:12:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Nov-03 23:12:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:12:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2010-Nov-03 23:12:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Nov-03 23:12:14 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2010-Nov-03 23:12:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2010-Nov-03 23:12:14 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.666666666666668 1.637852 2010.8431672243771 18.999933 2010-Nov-03 23:12:14 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333337 30.666666666666668 2010-Nov-03 23:12:14 LOG4 log_alfabeam: ALFABEAM 1 1.237955541788754 30.578883359479033 2010-Nov-03 23:12:14 LOG4 log_alfabeam: ALFABEAM 2 1.240536601082575 30.671067920224658 2010-Nov-03 23:12:14 LOG4 log_alfabeam: ALFABEAM 3 1.235940311048807 30.759133437412217 2010-Nov-03 23:12:14 LOG4 log_alfabeam: ALFABEAM 4 1.228684731109136 30.754281195403600 2010-Nov-03 23:12:14 LOG4 log_alfabeam: ALFABEAM 5 1.226117745691278 30.661498936218123 2010-Nov-03 23:12:14 LOG4 log_alfabeam: ALFABEAM 6 1.230791993009003 30.574169300825371 2010-Nov-03 23:12:14 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 30700016 2010-Nov-03 23:12:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Nov-03 23:12:15 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2010-Nov-03 23:12:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Nov-03 23:12:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Nov-03 23:12:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:12:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:12:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:12:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2010-Nov-03 23:12:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11536.00 2010-Nov-03 23:12:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.218 (still bad) 2010-Nov-03 23:12:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Nov-03 23:12:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:12:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:12:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:12:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:12:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:12:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:12:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:12:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:12:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:12:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:12:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.146 (still bad) 2010-Nov-03 23:12:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:12:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.146 (still bad) 2010-Nov-03 23:12:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:12:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2010-Nov-03 23:12:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 0.998 1.039 1.142 2010-Nov-03 23:12:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.048 1.034 1.145 1.012 2010-Nov-03 23:12:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.111 0.846 1.049 0.983 2010-Nov-03 23:12:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.993 0.101 1.083 0.119 2010-Nov-03 23:12:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.150 (still bad) 2010-Nov-03 23:12:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:12:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.145 (still bad) 2010-Nov-03 23:12:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Nov-03 23:12:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Nov-03 23:12:26 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2010-Nov-03 23:12:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Nov-03 23:12:26 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2010-Nov-03 23:12:26 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2010-Nov-03 23:12:26 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2010-Nov-03 23:12:26 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2010-Nov-03 23:12:26 LOG5 antvel: Calling 'antvel 11400.000000 304000.000000 J Topocentric 0' 2010-Nov-03 23:12:26 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84317 J 2010-Nov-03 23:12:26 LOG2 antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 23:12:26 LOG2 antvel: Parameters to Doppler: Topocentric 97946 2010 307 0.0 2010-Nov-03 23:12:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 23:12:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2010-Nov-03 23:12:26 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2010-Nov-03 23:12:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Nov-03 23:12:26 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Nov-03 23:12:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Nov-03 23:12:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:12:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2010-Nov-03 23:12:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Nov-03 23:12:26 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2010-Nov-03 23:12:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2010-Nov-03 23:12:26 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.666666666666668 1.641194 2010.8431676046341 18.999933 2010-Nov-03 23:12:26 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333334 30.666666666666668 2010-Nov-03 23:12:26 LOG4 log_alfabeam: ALFABEAM 1 1.237977898346869 30.579080134546516 2010-Nov-03 23:12:26 LOG4 log_alfabeam: ALFABEAM 2 1.240535460308477 30.671374139518466 2010-Nov-03 23:12:26 LOG4 log_alfabeam: ALFABEAM 3 1.235916654487422 30.759243614485243 2010-Nov-03 23:12:26 LOG4 log_alfabeam: ALFABEAM 4 1.228662411751705 30.754083485094064 2010-Nov-03 23:12:26 LOG4 log_alfabeam: ALFABEAM 5 1.226119122625549 30.661193143780274 2010-Nov-03 23:12:26 LOG4 log_alfabeam: ALFABEAM 6 1.230815529999012 30.574061932429640 2010-Nov-03 23:12:26 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 30700017 2010-Nov-03 23:12:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Nov-03 23:12:27 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2010-Nov-03 23:12:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Nov-03 23:12:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Nov-03 23:12:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:12:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:12:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:12:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2010-Nov-03 23:12:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11548.00 2010-Nov-03 23:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.145 (still bad) 2010-Nov-03 23:12:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Nov-03 23:12:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:12:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:12:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:12:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:12:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:12:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:12:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:12:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:12:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.139 (still bad) 2010-Nov-03 23:12:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.138 (still bad) 2010-Nov-03 23:12:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:12:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.143 (still bad) 2010-Nov-03 23:12:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.149 (still bad) 2010-Nov-03 23:12:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:12:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Nov-03 23:12:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Nov-03 23:12:38 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2010-Nov-03 23:12:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Nov-03 23:12:38 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2010-Nov-03 23:12:38 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2010-Nov-03 23:12:38 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2010-Nov-03 23:12:38 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2010-Nov-03 23:12:38 LOG5 antvel: Calling 'antvel 11400.000000 304000.000000 J Topocentric 0' 2010-Nov-03 23:12:38 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84317 J 2010-Nov-03 23:12:38 LOG2 antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 23:12:38 LOG2 antvel: Parameters to Doppler: Topocentric 97958 2010 307 0.0 2010-Nov-03 23:12:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 23:12:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2010-Nov-03 23:12:38 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2010-Nov-03 23:12:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Nov-03 23:12:38 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Nov-03 23:12:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Nov-03 23:12:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:12:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2010-Nov-03 23:12:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Nov-03 23:12:38 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2010-Nov-03 23:12:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2010-Nov-03 23:12:38 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.666666666666668 1.644537 2010.8431679848911 18.999933 2010-Nov-03 23:12:38 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333339 30.666666666666679 2010-Nov-03 23:12:38 LOG4 log_alfabeam: ALFABEAM 1 1.238000155067259 30.579277416301647 2010-Nov-03 23:12:38 LOG4 log_alfabeam: ALFABEAM 2 1.240534244194567 30.671679628981572 2010-Nov-03 23:12:38 LOG4 log_alfabeam: ALFABEAM 3 1.235893022483275 30.759352542463432 2010-Nov-03 23:12:38 LOG4 log_alfabeam: ALFABEAM 4 1.228640192785805 30.753885274118424 2010-Nov-03 23:12:38 LOG4 log_alfabeam: ALFABEAM 5 1.226120574120677 30.660888097529149 2010-Nov-03 23:12:38 LOG4 log_alfabeam: ALFABEAM 6 1.230839041233841 30.573955798333841 2010-Nov-03 23:12:38 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 30700018 2010-Nov-03 23:12:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Nov-03 23:12:39 LOG5 begin_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2010-Nov-03 23:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.140 (still bad) 2010-Nov-03 23:12:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:12:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Nov-03 23:12:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Nov-03 23:12:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:12:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:12:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:12:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2010-Nov-03 23:12:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11560.00 2010-Nov-03 23:12:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Nov-03 23:12:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:12:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:12:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:12:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:12:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:12:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:12:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.140 (still bad) 2010-Nov-03 23:12:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:12:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2010-Nov-03 23:12:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:12:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:12:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.130 (still bad) 2010-Nov-03 23:12:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2010-Nov-03 23:12:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:12:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2010-Nov-03 23:12:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Nov-03 23:12:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Nov-03 23:12:50 LOG5 end_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2010-Nov-03 23:12:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Nov-03 23:12:50 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2010-Nov-03 23:12:50 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2010-Nov-03 23:12:50 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2010-Nov-03 23:12:50 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2010-Nov-03 23:12:50 LOG5 antvel: Calling 'antvel 11400.000000 304000.000000 J Topocentric 0' 2010-Nov-03 23:12:50 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84317 J 2010-Nov-03 23:12:50 LOG2 antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 23:12:50 LOG2 antvel: Parameters to Doppler: Topocentric 97970 2010 307 0.0 2010-Nov-03 23:12:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 23:12:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2010-Nov-03 23:12:50 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2010-Nov-03 23:12:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Nov-03 23:12:50 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Nov-03 23:12:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Nov-03 23:12:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:12:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2010-Nov-03 23:12:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Nov-03 23:12:50 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2010-Nov-03 23:12:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2010-Nov-03 23:12:50 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.666666666666668 1.647879 2010.8431683651481 18.999933 2010-Nov-03 23:12:50 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333344 30.666666666666679 2010-Nov-03 23:12:50 LOG4 log_alfabeam: ALFABEAM 1 1.238022298608686 30.579475075939857 2010-Nov-03 23:12:50 LOG4 log_alfabeam: ALFABEAM 2 1.240532954079768 30.671984200630842 2010-Nov-03 23:12:50 LOG4 log_alfabeam: ALFABEAM 3 1.235869429821943 30.759460161788915 2010-Nov-03 23:12:50 LOG4 log_alfabeam: ALFABEAM 4 1.228618087523403 30.753686691851065 2010-Nov-03 23:12:50 LOG4 log_alfabeam: ALFABEAM 5 1.226122098687505 30.660583985024193 2010-Nov-03 23:12:50 LOG4 log_alfabeam: ALFABEAM 6 1.230862512017677 30.573850956356715 2010-Nov-03 23:12:50 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 30700019 2010-Nov-03 23:12:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Nov-03 23:12:51 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2010-Nov-03 23:12:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Nov-03 23:12:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Nov-03 23:12:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:12:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:12:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2010-Nov-03 23:12:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2010-Nov-03 23:12:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11572.00 2010-Nov-03 23:12:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Nov-03 23:12:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:12:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:12:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:12:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:12:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:12:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:12:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:12:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2010-Nov-03 23:12:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.129 (still bad) 2010-Nov-03 23:12:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:12:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:12:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2010-Nov-03 23:12:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.139 (still bad) 2010-Nov-03 23:12:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.131 (still bad) 2010-Nov-03 23:13:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Nov-03 23:13:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Nov-03 23:13:02 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2010-Nov-03 23:13:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Nov-03 23:13:02 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2010-Nov-03 23:13:02 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2010-Nov-03 23:13:02 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2010-Nov-03 23:13:02 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2010-Nov-03 23:13:02 LOG5 antvel: Calling 'antvel 11400.000000 304000.000000 J Topocentric 0' 2010-Nov-03 23:13:02 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84317 J 2010-Nov-03 23:13:02 LOG2 antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 23:13:02 LOG2 antvel: Parameters to Doppler: Topocentric 97982 2010 307 0.0 2010-Nov-03 23:13:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 23:13:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2010-Nov-03 23:13:02 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2010-Nov-03 23:13:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Nov-03 23:13:02 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Nov-03 23:13:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Nov-03 23:13:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:13:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2010-Nov-03 23:13:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Nov-03 23:13:02 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2010-Nov-03 23:13:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2010-Nov-03 23:13:02 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.666666666666668 1.651222 2010.8431687454054 18.999933 2010-Nov-03 23:13:02 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333334 30.666666666666664 2010-Nov-03 23:13:02 LOG4 log_alfabeam: ALFABEAM 1 1.238044342206822 30.579673221025924 2010-Nov-03 23:13:02 LOG4 log_alfabeam: ALFABEAM 2 1.240531589804773 30.672288031636118 2010-Nov-03 23:13:02 LOG4 log_alfabeam: ALFABEAM 3 1.235845863023326 30.759566542542725 2010-Nov-03 23:13:02 LOG4 log_alfabeam: ALFABEAM 4 1.228596082744975 30.753487630187823 2010-Nov-03 23:13:02 LOG4 log_alfabeam: ALFABEAM 5 1.226123696616404 30.660280629211243 2010-Nov-03 23:13:02 LOG4 log_alfabeam: ALFABEAM 6 1.230885955775103 30.573747338014467 2010-Nov-03 23:13:02 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 30700020 2010-Nov-03 23:13:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Nov-03 23:13:03 LOG5 begin_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2010-Nov-03 23:13:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Nov-03 23:13:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Nov-03 23:13:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:13:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:13:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:13:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2010-Nov-03 23:13:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11584.00 2010-Nov-03 23:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.128 (still bad) 2010-Nov-03 23:13:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Nov-03 23:13:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:13:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:13:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:13:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:13:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:13:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:13:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:13:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:13:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2010-Nov-03 23:13:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2010-Nov-03 23:13:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.132 (still bad) 2010-Nov-03 23:13:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.144 (still bad) 2010-Nov-03 23:13:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2010-Nov-03 23:13:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Nov-03 23:13:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Nov-03 23:13:14 LOG5 end_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2010-Nov-03 23:13:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Nov-03 23:13:14 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2010-Nov-03 23:13:14 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2010-Nov-03 23:13:14 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2010-Nov-03 23:13:14 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2010-Nov-03 23:13:14 LOG5 antvel: Calling 'antvel 11400.000000 304000.000000 J Topocentric 0' 2010-Nov-03 23:13:14 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84317 J 2010-Nov-03 23:13:14 LOG2 antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 23:13:14 LOG2 antvel: Parameters to Doppler: Topocentric 97994 2010 307 0.0 2010-Nov-03 23:13:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 23:13:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2010-Nov-03 23:13:14 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2010-Nov-03 23:13:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Nov-03 23:13:14 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Nov-03 23:13:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Nov-03 23:13:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:13:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2010-Nov-03 23:13:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Nov-03 23:13:14 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2010-Nov-03 23:13:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2010-Nov-03 23:13:14 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.666666666666668 1.654564 2010.8431691256624 18.999933 2010-Nov-03 23:13:14 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333337 30.666666666666668 2010-Nov-03 23:13:14 LOG4 log_alfabeam: ALFABEAM 1 1.238066272667562 30.579871722357392 2010-Nov-03 23:13:14 LOG4 log_alfabeam: ALFABEAM 2 1.240530152799385 30.672590935250259 2010-Nov-03 23:13:14 LOG4 log_alfabeam: ALFABEAM 3 1.235822336816343 30.759671626818378 2010-Nov-03 23:13:14 LOG4 log_alfabeam: ALFABEAM 4 1.228574191614746 30.753288218891544 2010-Nov-03 23:13:14 LOG4 log_alfabeam: ALFABEAM 5 1.226125366328810 30.659978216393913 2010-Nov-03 23:13:14 LOG4 log_alfabeam: ALFABEAM 6 1.230909357868227 30.573644999499095 2010-Nov-03 23:13:14 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 30700021 2010-Nov-03 23:13:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Nov-03 23:13:15 LOG5 begin_task: Level: (4) ID = <10099> Status = 0 0 0 0 ok 2010-Nov-03 23:13:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Nov-03 23:13:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Nov-03 23:13:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:13:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:13:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:13:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2010-Nov-03 23:13:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11596.00 2010-Nov-03 23:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.133 (still bad) 2010-Nov-03 23:13:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Nov-03 23:13:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:13:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:13:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:13:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:13:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:13:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:13:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:13:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2010-Nov-03 23:13:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.135 (still bad) 2010-Nov-03 23:13:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.136 (still bad) 2010-Nov-03 23:13:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2010-Nov-03 23:13:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.968 0.989 1.037 1.127 2010-Nov-03 23:13:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.072 1.029 1.145 1.012 2010-Nov-03 23:13:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.118 0.862 1.047 0.976 2010-Nov-03 23:13:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.012 0.102 1.104 0.121 2010-Nov-03 23:13:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Nov-03 23:13:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Nov-03 23:13:26 LOG5 end_task: Level: (4) ID = <10099> Status = 0 0 0 0 ok 2010-Nov-03 23:13:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Nov-03 23:13:26 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2010-Nov-03 23:13:26 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-Nov-03 23:13:26 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Nov-03 23:13:26 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Nov-03 23:13:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Nov-03 23:13:26 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2010-Nov-03 23:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.137 (still bad) 2010-Nov-03 23:13:26 LOG3 CALCONTROL-caltrig: Software trigger 2010-Nov-03 23:13:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Nov-03 23:13:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Nov-03 23:13:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Nov-03 23:13:26 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2010-Nov-03 23:13:26 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2010-Nov-03 23:13:26 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2010-Nov-03 23:13:26 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2010-Nov-03 23:13:26 LOG5 antvel: Calling 'antvel 11400.000000 304000.000000 J Topocentric 0' 2010-Nov-03 23:13:26 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84317 J 2010-Nov-03 23:13:26 LOG2 antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 23:13:26 LOG2 antvel: Parameters to Doppler: Topocentric 98006 2010 307 0.0 2010-Nov-03 23:13:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 23:13:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2010-Nov-03 23:13:26 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2010-Nov-03 23:13:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Nov-03 23:13:26 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Nov-03 23:13:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Nov-03 23:13:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:13:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2010-Nov-03 23:13:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Nov-03 23:13:26 LOG5 begin_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2010-Nov-03 23:13:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2010-Nov-03 23:13:26 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.666666666666668 1.657907 2010.8431695059194 18.999933 2010-Nov-03 23:13:26 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333336 30.666666666666664 2010-Nov-03 23:13:26 LOG4 log_alfabeam: ALFABEAM 1 1.238088103118427 30.580070688123843 2010-Nov-03 23:13:26 LOG4 log_alfabeam: ALFABEAM 2 1.240528642818350 30.672893087887374 2010-Nov-03 23:13:26 LOG4 log_alfabeam: ALFABEAM 3 1.235798837743019 30.759775483303617 2010-Nov-03 23:13:26 LOG4 log_alfabeam: ALFABEAM 4 1.228552401021969 30.753088349238990 2010-Nov-03 23:13:26 LOG4 log_alfabeam: ALFABEAM 5 1.226127108200417 30.659676570291850 2010-Nov-03 23:13:26 LOG4 log_alfabeam: ALFABEAM 6 1.230932731698144 30.573543873706789 2010-Nov-03 23:13:26 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 30700022 2010-Nov-03 23:13:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Nov-03 23:13:27 LOG5 begin_task: Level: (4) ID = <10102> Status = 0 0 0 0 ok 2010-Nov-03 23:13:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Nov-03 23:13:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Nov-03 23:13:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:13:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:13:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:13:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2010-Nov-03 23:13:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11608.00 2010-Nov-03 23:13:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Nov-03 23:13:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:13:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:13:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:13:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:13:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:13:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:13:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:13:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:13:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.552 (still bad) 2010-Nov-03 23:13:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.688 (still bad) 2010-Nov-03 23:13:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.686 (still bad) 2010-Nov-03 23:13:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.682 (still bad) 2010-Nov-03 23:13:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.689 (still bad) 2010-Nov-03 23:13:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Nov-03 23:13:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Nov-03 23:13:38 LOG5 end_task: Level: (4) ID = <10102> Status = 0 0 0 0 ok 2010-Nov-03 23:13:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Nov-03 23:13:38 LOG5 end_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2010-Nov-03 23:13:38 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2010-Nov-03 23:13:38 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2010-Nov-03 23:13:38 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2010-Nov-03 23:13:38 LOG5 antvel: Calling 'antvel 11400.000000 304000.000000 J Topocentric 0' 2010-Nov-03 23:13:38 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84317 J 2010-Nov-03 23:13:38 LOG2 antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 23:13:38 LOG2 antvel: Parameters to Doppler: Topocentric 98018 2010 307 0.0 2010-Nov-03 23:13:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 23:13:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2010-Nov-03 23:13:38 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2010-Nov-03 23:13:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Nov-03 23:13:38 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Nov-03 23:13:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Nov-03 23:13:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:13:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2010-Nov-03 23:13:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Nov-03 23:13:38 LOG5 begin_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2010-Nov-03 23:13:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2010-Nov-03 23:13:38 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.666666666666668 1.661249 2010.8431698861764 18.999933 2010-Nov-03 23:13:38 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333336 30.666666666666668 2010-Nov-03 23:13:38 LOG4 log_alfabeam: ALFABEAM 1 1.238109820511967 30.580269988754974 2010-Nov-03 23:13:38 LOG4 log_alfabeam: ALFABEAM 2 1.240527061380384 30.673194304045733 2010-Nov-03 23:13:38 LOG4 log_alfabeam: ALFABEAM 3 1.235775380474138 30.759878055722432 2010-Nov-03 23:13:38 LOG4 log_alfabeam: ALFABEAM 4 1.228530723983628 30.752888151351229 2010-Nov-03 23:13:38 LOG4 log_alfabeam: ALFABEAM 5 1.226128920565253 30.659375875943841 2010-Nov-03 23:13:38 LOG4 log_alfabeam: ALFABEAM 6 1.230956062686371 30.573444015223654 2010-Nov-03 23:13:38 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 30700023 2010-Nov-03 23:13:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Nov-03 23:13:39 LOG5 begin_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2010-Nov-03 23:13:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Nov-03 23:13:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Nov-03 23:13:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:13:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:13:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:13:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2010-Nov-03 23:13:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11620.00 2010-Nov-03 23:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.687 (still bad) 2010-Nov-03 23:13:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Nov-03 23:13:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:13:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:13:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:13:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:13:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:13:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:13:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:13:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.590 (still bad) 2010-Nov-03 23:13:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.587 (still bad) 2010-Nov-03 23:13:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.588 (still bad) 2010-Nov-03 23:13:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.588 (still bad) 2010-Nov-03 23:13:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.585 (still bad) 2010-Nov-03 23:13:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Nov-03 23:13:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Nov-03 23:13:50 LOG5 end_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2010-Nov-03 23:13:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Nov-03 23:13:50 LOG5 end_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2010-Nov-03 23:13:50 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2010-Nov-03 23:13:50 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2010-Nov-03 23:13:50 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2010-Nov-03 23:13:50 LOG5 antvel: Calling 'antvel 11400.000000 304000.000000 J Topocentric 0' 2010-Nov-03 23:13:50 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84317 J 2010-Nov-03 23:13:50 LOG2 antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 23:13:50 LOG2 antvel: Parameters to Doppler: Topocentric 98030 2010 307 0.0 2010-Nov-03 23:13:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 23:13:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2010-Nov-03 23:13:50 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2010-Nov-03 23:13:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Nov-03 23:13:50 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Nov-03 23:13:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Nov-03 23:13:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:13:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2010-Nov-03 23:13:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Nov-03 23:13:50 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2010-Nov-03 23:13:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2010-Nov-03 23:13:50 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.666666666666668 1.664591 2010.8431702664334 18.999933 2010-Nov-03 23:13:50 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333335 30.666666666666679 2010-Nov-03 23:13:50 LOG4 log_alfabeam: ALFABEAM 1 1.238131431416549 30.580469673237669 2010-Nov-03 23:13:50 LOG4 log_alfabeam: ALFABEAM 2 1.240525408660436 30.673494669621348 2010-Nov-03 23:13:50 LOG4 log_alfabeam: ALFABEAM 3 1.235751958578281 30.759979381243181 2010-Nov-03 23:13:50 LOG4 log_alfabeam: ALFABEAM 4 1.228509153936405 30.752687575978864 2010-Nov-03 23:13:50 LOG4 log_alfabeam: ALFABEAM 5 1.226130803309476 30.659076047442547 2010-Nov-03 23:13:50 LOG4 log_alfabeam: ALFABEAM 6 1.230979357244228 30.573345387646775 2010-Nov-03 23:13:50 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 30700024 2010-Nov-03 23:13:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Nov-03 23:13:51 LOG5 begin_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2010-Nov-03 23:13:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Nov-03 23:13:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Nov-03 23:13:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:13:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:13:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:13:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2010-Nov-03 23:13:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11632.00 2010-Nov-03 23:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.585 (still bad) 2010-Nov-03 23:13:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Nov-03 23:13:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:13:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:13:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:13:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:13:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:13:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:13:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:13:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:13:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.581 (still bad) 2010-Nov-03 23:13:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.578 (still bad) 2010-Nov-03 23:13:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.577 (still bad) 2010-Nov-03 23:13:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:13:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.579 (still bad) 2010-Nov-03 23:14:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Nov-03 23:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.579 (still bad) 2010-Nov-03 23:14:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Nov-03 23:14:02 LOG5 end_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2010-Nov-03 23:14:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Nov-03 23:14:02 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2010-Nov-03 23:14:02 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2010-Nov-03 23:14:02 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2010-Nov-03 23:14:02 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2010-Nov-03 23:14:02 LOG5 antvel: Calling 'antvel 11400.000000 304000.000000 J Topocentric 0' 2010-Nov-03 23:14:02 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84317 J 2010-Nov-03 23:14:02 LOG2 antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 23:14:02 LOG2 antvel: Parameters to Doppler: Topocentric 98042 2010 307 0.0 2010-Nov-03 23:14:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 23:14:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2010-Nov-03 23:14:02 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2010-Nov-03 23:14:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Nov-03 23:14:02 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Nov-03 23:14:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Nov-03 23:14:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:14:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2010-Nov-03 23:14:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Nov-03 23:14:02 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2010-Nov-03 23:14:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2010-Nov-03 23:14:02 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.666666666666668 1.667934 2010.8431706466906 18.999933 2010-Nov-03 23:14:02 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333336 30.666666666666668 2010-Nov-03 23:14:02 LOG4 log_alfabeam: ALFABEAM 1 1.238152942282427 30.580669791082716 2010-Nov-03 23:14:02 LOG4 log_alfabeam: ALFABEAM 2 1.240523684748749 30.673794269611243 2010-Nov-03 23:14:02 LOG4 log_alfabeam: ALFABEAM 3 1.235728565657609 30.760079495597576 2010-Nov-03 23:14:02 LOG4 log_alfabeam: ALFABEAM 4 1.228487684435885 30.752486573355586 2010-Nov-03 23:14:02 LOG4 log_alfabeam: ALFABEAM 5 1.226132756403150 30.658776999797947 2010-Nov-03 23:14:02 LOG4 log_alfabeam: ALFABEAM 6 1.231002621748247 30.573247955993793 2010-Nov-03 23:14:02 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 30700025 2010-Nov-03 23:14:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Nov-03 23:14:03 LOG5 begin_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2010-Nov-03 23:14:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Nov-03 23:14:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Nov-03 23:14:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:14:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:14:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:14:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2010-Nov-03 23:14:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11644.00 2010-Nov-03 23:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.579 (still bad) 2010-Nov-03 23:14:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Nov-03 23:14:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:14:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:14:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:14:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:14:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:14:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:14:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:14:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.567 (still bad) 2010-Nov-03 23:14:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.566 (still bad) 2010-Nov-03 23:14:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:14:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.566 (still bad) 2010-Nov-03 23:14:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.568 (still bad) 2010-Nov-03 23:14:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Nov-03 23:14:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Nov-03 23:14:14 LOG5 end_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2010-Nov-03 23:14:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Nov-03 23:14:14 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2010-Nov-03 23:14:14 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2010-Nov-03 23:14:14 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2010-Nov-03 23:14:14 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2010-Nov-03 23:14:14 LOG5 antvel: Calling 'antvel 11400.000000 304000.000000 J Topocentric 0' 2010-Nov-03 23:14:14 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84317 J 2010-Nov-03 23:14:14 LOG2 antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 23:14:14 LOG2 antvel: Parameters to Doppler: Topocentric 98054 2010 307 0.0 2010-Nov-03 23:14:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 23:14:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2010-Nov-03 23:14:14 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2010-Nov-03 23:14:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Nov-03 23:14:14 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Nov-03 23:14:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Nov-03 23:14:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:14:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2010-Nov-03 23:14:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Nov-03 23:14:14 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2010-Nov-03 23:14:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2010-Nov-03 23:14:14 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.666666666666668 1.671276 2010.8431710269476 18.999933 2010-Nov-03 23:14:14 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333337 30.666666666666689 2010-Nov-03 23:14:14 LOG4 log_alfabeam: ALFABEAM 1 1.238174340281083 30.580870212223420 2010-Nov-03 23:14:14 LOG4 log_alfabeam: ALFABEAM 2 1.240521891293689 30.674092920397541 2010-Nov-03 23:14:14 LOG4 log_alfabeam: ALFABEAM 3 1.235705216292928 30.760178344915388 2010-Nov-03 23:14:14 LOG4 log_alfabeam: ALFABEAM 4 1.228466328279144 30.752285274084517 2010-Nov-03 23:14:14 LOG4 log_alfabeam: ALFABEAM 5 1.226134778052848 30.658478916136612 2010-Nov-03 23:14:14 LOG4 log_alfabeam: ALFABEAM 6 1.231025841711635 30.573151772481829 2010-Nov-03 23:14:14 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 30700026 2010-Nov-03 23:14:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Nov-03 23:14:15 LOG5 begin_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2010-Nov-03 23:14:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.568 (still bad) 2010-Nov-03 23:14:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Nov-03 23:14:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Nov-03 23:14:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:14:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:14:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:14:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2010-Nov-03 23:14:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11656.00 2010-Nov-03 23:14:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Nov-03 23:14:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:14:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:14:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:14:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:14:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:14:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:14:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.568 (still bad) 2010-Nov-03 23:14:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:14:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.565 (still bad) 2010-Nov-03 23:14:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.565 (still bad) 2010-Nov-03 23:14:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:14:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.564 (still bad) 2010-Nov-03 23:14:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2010-Nov-03 23:14:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.331 1.346 1.389 1.494 2010-Nov-03 23:14:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.384 1.391 1.566 1.369 2010-Nov-03 23:14:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.517 1.159 1.414 1.266 2010-Nov-03 23:14:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.369 0.101 1.492 0.120 2010-Nov-03 23:14:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Nov-03 23:14:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Nov-03 23:14:26 LOG5 end_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2010-Nov-03 23:14:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Nov-03 23:14:26 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2010-Nov-03 23:14:26 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2010-Nov-03 23:14:26 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2010-Nov-03 23:14:26 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2010-Nov-03 23:14:26 LOG5 antvel: Calling 'antvel 11400.000000 304000.000000 J Topocentric 0' 2010-Nov-03 23:14:26 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84317 J 2010-Nov-03 23:14:26 LOG2 antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 23:14:26 LOG2 antvel: Parameters to Doppler: Topocentric 98066 2010 307 0.0 2010-Nov-03 23:14:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 23:14:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2010-Nov-03 23:14:26 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2010-Nov-03 23:14:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Nov-03 23:14:26 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Nov-03 23:14:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Nov-03 23:14:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:14:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2010-Nov-03 23:14:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Nov-03 23:14:26 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2010-Nov-03 23:14:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2010-Nov-03 23:14:26 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.666666666666668 1.674619 2010.8431714072046 18.999933 2010-Nov-03 23:14:26 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333339 30.666666666666668 2010-Nov-03 23:14:26 LOG4 log_alfabeam: ALFABEAM 1 1.238195638267757 30.581071046319636 2010-Nov-03 23:14:26 LOG4 log_alfabeam: ALFABEAM 2 1.240520027839593 30.674390796444101 2010-Nov-03 23:14:26 LOG4 log_alfabeam: ALFABEAM 3 1.235681897087985 30.760275994431584 2010-Nov-03 23:14:26 LOG4 log_alfabeam: ALFABEAM 4 1.228445072629301 30.752083567986439 2010-Nov-03 23:14:26 LOG4 log_alfabeam: ALFABEAM 5 1.226136868843078 30.658181622172897 2010-Nov-03 23:14:26 LOG4 log_alfabeam: ALFABEAM 6 1.231049030470329 30.573056773425524 2010-Nov-03 23:14:26 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 30700027 2010-Nov-03 23:14:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Nov-03 23:14:27 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2010-Nov-03 23:14:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:14:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:14:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Nov-03 23:14:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Nov-03 23:14:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:14:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:14:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.565 (still bad) 2010-Nov-03 23:14:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2010-Nov-03 23:14:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11668.00 2010-Nov-03 23:14:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Nov-03 23:14:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:14:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:14:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:14:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:14:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:14:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:14:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:14:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.565 (still bad) 2010-Nov-03 23:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.569 (still bad) 2010-Nov-03 23:14:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:14:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:14:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:14:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.567 (still bad) 2010-Nov-03 23:14:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.567 (still bad) 2010-Nov-03 23:14:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:14:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:14:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:14:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.571 (still bad) 2010-Nov-03 23:14:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Nov-03 23:14:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Nov-03 23:14:38 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2010-Nov-03 23:14:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Nov-03 23:14:38 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2010-Nov-03 23:14:38 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2010-Nov-03 23:14:38 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2010-Nov-03 23:14:38 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2010-Nov-03 23:14:38 LOG5 antvel: Calling 'antvel 11400.000000 304000.000000 J Topocentric 0' 2010-Nov-03 23:14:38 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84317 J 2010-Nov-03 23:14:38 LOG2 antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 23:14:38 LOG2 antvel: Parameters to Doppler: Topocentric 98078 2010 307 0.0 2010-Nov-03 23:14:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 23:14:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2010-Nov-03 23:14:38 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2010-Nov-03 23:14:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Nov-03 23:14:38 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Nov-03 23:14:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Nov-03 23:14:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:14:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2010-Nov-03 23:14:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Nov-03 23:14:38 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2010-Nov-03 23:14:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2010-Nov-03 23:14:38 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.666666666666668 1.677961 2010.8431717874616 18.999933 2010-Nov-03 23:14:38 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333343 30.666666666666682 2010-Nov-03 23:14:38 LOG4 log_alfabeam: ALFABEAM 1 1.238216823559190 30.581272163009729 2010-Nov-03 23:14:38 LOG4 log_alfabeam: ALFABEAM 2 1.240518096118890 30.674687715398779 2010-Nov-03 23:14:38 LOG4 log_alfabeam: ALFABEAM 3 1.235658622561874 30.760372391853259 2010-Nov-03 23:14:38 LOG4 log_alfabeam: ALFABEAM 4 1.228423930137634 30.751881585949988 2010-Nov-03 23:14:38 LOG4 log_alfabeam: ALFABEAM 5 1.226139026897898 30.657885299749633 2010-Nov-03 23:14:38 LOG4 log_alfabeam: ALFABEAM 6 1.231072173600334 30.572963009489406 2010-Nov-03 23:14:38 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 30700028 2010-Nov-03 23:14:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Nov-03 23:14:39 LOG5 begin_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2010-Nov-03 23:14:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:14:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Nov-03 23:14:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Nov-03 23:14:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:14:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:14:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:14:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2010-Nov-03 23:14:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11680.00 2010-Nov-03 23:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.566 (still bad) 2010-Nov-03 23:14:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Nov-03 23:14:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:14:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:14:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:14:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:14:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:14:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:14:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:14:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.576 (still bad) 2010-Nov-03 23:14:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:14:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.572 (still bad) 2010-Nov-03 23:14:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.573 (still bad) 2010-Nov-03 23:14:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.584 (still bad) 2010-Nov-03 23:14:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.572 (still bad) 2010-Nov-03 23:14:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Nov-03 23:14:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Nov-03 23:14:50 LOG5 end_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2010-Nov-03 23:14:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Nov-03 23:14:50 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2010-Nov-03 23:14:50 INFO2 smartfreq: Switching off CAL 2010-Nov-03 23:14:50 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Nov-03 23:14:50 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Nov-03 23:14:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Nov-03 23:14:50 LOG5 begin_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2010-Nov-03 23:14:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:50 LOG3 CALCONTROL-caltrig: Software trigger 2010-Nov-03 23:14:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Nov-03 23:14:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Nov-03 23:14:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Nov-03 23:14:50 LOG5 end_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2010-Nov-03 23:14:50 INFO3 restore_frequencies: Restoring original frequencies 2010-Nov-03 23:14:50 LOG5 antvel: Calling 'antvel 11400.000000 304000.000000 J Topocentric 0' 2010-Nov-03 23:14:50 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84317 J 2010-Nov-03 23:14:50 LOG2 antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 23:14:50 LOG2 antvel: Parameters to Doppler: Topocentric 98090 2010 307 0.0 2010-Nov-03 23:14:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 23:14:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2010-Nov-03 23:14:50 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2010-Nov-03 23:14:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Nov-03 23:14:50 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Nov-03 23:14:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Nov-03 23:14:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:14:50 STOP finish_task: Finishing task 'smart frequency switching' 2010-Nov-03 23:14:50 LOG5 finish_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2010-Nov-03 23:14:50 DONE finish_task: DONE finished pattern: smart frequency switching 2010-Nov-03 23:14:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 23:14:50 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2010-Nov-03 23:14:50 LOG5 end_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2010-Nov-03 23:14:50 COMMAND run_command_line: EXECUTING command 28: 'LOAD ages_mock.conf' 2010-Nov-03 23:14:51 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-Nov-03 23:14:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Nov-03 23:14:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:14:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:14:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:14:51 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Nov-03 23:14:51 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-Nov-03 23:14:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:14:51 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock.conf' 2010-Nov-03 23:14:51 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2010-Nov-03 23:14:51 LOG2 CIMA-antvel: Precessing RA = 01:14:00.0 Dec = +30:40:00.0 Epoch = 2010.84317 J 2010-Nov-03 23:14:51 LOG2 CIMA-antvel: Computed apparent RA = 01:14:38.4 Dec = +30:43:41.9 2010-Nov-03 23:14:51 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 98090 2010 307 0.0 2010-Nov-03 23:14:51 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2010-Nov-03 23:14:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Nov-03 23:14:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Nov-03 23:14:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Nov-03 23:14:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Nov-03 23:14:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Nov-03 23:14:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2010-Nov-03 23:14:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Nov-03 23:14:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2010-Nov-03 23:14:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2010-Nov-03 23:14:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2010-Nov-03 23:14:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2010-Nov-03 23:14:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2010-Nov-03 23:14:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2010-Nov-03 23:14:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2010-Nov-03 23:14:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2010-Nov-03 23:14:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2010-Nov-03 23:14:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Nov-03 23:14:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Nov-03 23:14:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Nov-03 23:14:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2010-Nov-03 23:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.571 (still bad) 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Nov-03 23:14:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled1) "1" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled2) "0" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards1) "both" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards2) "both" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode1) "spectra" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode2) "spectra" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg1) "2-pol" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg2) "2-pol" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits1) "32" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits2) "32" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor1) "1" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor2) "1" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset1) "0.0" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset2) "0.0" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags1) "8192" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags2) "8192" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs1) "1000.0" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs2) "1000.0" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad1) "1" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad2) "0" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors1) "13" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors2) "0" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors1) "0" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors2) "0" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors1) "0" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors2) "0" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors1) "0" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors2) "0" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype1) "fits" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype2) "fits" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2010-Nov-03 23:14:53 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2010-Nov-03 23:14:54 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2010-Nov-03 23:14:54 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Nov-03 23:14:54 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Nov-03 23:14:54 LOG5 begin_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2010-Nov-03 23:14:54 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Nov-03 23:14:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Nov-03 23:14:54 LOG1 config_iflo: Receiver ALFA already selected 2010-Nov-03 23:14:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Nov-03 23:14:54 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Nov-03 23:14:54 START begin_task: Starting task 'waiting on command to ALFA' 2010-Nov-03 23:14:54 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2010-Nov-03 23:14:54 LOG4 got_alfamon: From ALFAMON: ACK 2010-Nov-03 23:14:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Nov-03 23:14:54 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2010-Nov-03 23:14:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Nov-03 23:14:54 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Nov-03 23:14:54 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2010-Nov-03 23:14:54 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2010-Nov-03 23:14:54 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Nov-03 23:14:54 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Nov-03 23:14:54 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2010-Nov-03 23:14:54 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2010-Nov-03 23:14:54 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2010-Nov-03 23:14:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2010-Nov-03 23:14:54 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2010-Nov-03 23:14:54 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2010-Nov-03 23:14:54 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Nov-03 23:14:54 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Nov-03 23:14:54 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Nov-03 23:14:54 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Nov-03 23:14:54 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Nov-03 23:14:54 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2010-Nov-03 23:14:54 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2010-Nov-03 23:14:54 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2010-Nov-03 23:14:54 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2010-Nov-03 23:14:54 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-Nov-03 23:14:54 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2010-Nov-03 23:14:54 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2010-Nov-03 23:14:54 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Nov-03 23:14:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:14:54 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2010-Nov-03 23:14:54 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2010-Nov-03 23:14:54 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Nov-03 23:14:54 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2010-Nov-03 23:14:54 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2010-Nov-03 23:14:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Nov-03 23:14:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 23:14:54 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Nov-03 23:14:54 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2010-Nov-03 23:14:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2010-Nov-03 23:14:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-Nov-03 23:14:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:14:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 23:14:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:14:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:14:54 LOG4 got_cormsg: From DATATAKING: vw% DONE 2010-Nov-03 23:14:54 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Nov-03 23:14:54 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2010-Nov-03 23:14:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Nov-03 23:14:54 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Nov-03 23:14:54 LOG5 finish_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2010-Nov-03 23:14:54 DONE finish_task: DONE finished configuration: IF/LO path 2010-Nov-03 23:14:54 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 23:14:54 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Nov-03 23:14:54 LOG5 end_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2010-Nov-03 23:14:54 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Nov-03 23:14:54 LOG5 begin_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2010-Nov-03 23:14:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Nov-03 23:14:54 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Nov-03 23:14:54 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Nov-03 23:14:54 START begin_task: Starting task 'selecting calibration port' 2010-Nov-03 23:14:54 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2010-Nov-03 23:14:54 LOG3 vw_send: To DATATAKING: calport 3 2010-Nov-03 23:14:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Nov-03 23:14:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 23:14:54 START begin_task: Starting task 'waiting on calport' 2010-Nov-03 23:14:54 LOG5 begin_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2010-Nov-03 23:14:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:14:55 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Nov-03 23:14:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 23:14:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:14:55 LOG4 got_cormsg: From DATATAKING: DONE 2010-Nov-03 23:14:55 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Nov-03 23:14:55 LOG5 end_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2010-Nov-03 23:14:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Nov-03 23:14:55 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Nov-03 23:14:55 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2010-Nov-03 23:14:55 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Nov-03 23:14:55 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Nov-03 23:14:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Nov-03 23:14:55 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2010-Nov-03 23:14:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:14:55 LOG3 CALCONTROL-caltrig: Software trigger 2010-Nov-03 23:14:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Nov-03 23:14:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Nov-03 23:14:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Nov-03 23:14:55 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2010-Nov-03 23:14:55 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Nov-03 23:14:55 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Nov-03 23:14:55 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Nov-03 23:14:55 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Nov-03 23:14:55 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Nov-03 23:14:55 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Nov-03 23:14:55 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Nov-03 23:14:55 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Nov-03 23:14:55 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 J. Hernandez 2010-Nov-03 23:14:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 J. Hernandez 2010-Nov-03 23:14:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 J. Hernandez 2010-Nov-03 23:14:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 J. Hernandez 2010-Nov-03 23:14:55 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Nov-03 23:14:55 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Nov-03 23:14:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Nov-03 23:14:55 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2010-Nov-03 23:14:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Nov-03 23:14:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Nov-03 23:14:55 LOG3 CALCONTROL-caltrig: Software trigger 2010-Nov-03 23:14:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 J. Hernandez' 2010-Nov-03 23:14:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Nov-03 23:14:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Nov-03 23:14:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Nov-03 23:14:55 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2010-Nov-03 23:14:55 LOG3 sock_errsend: To WAPPDATA: FLUSH 2010-Nov-03 23:14:55 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Nov-03 23:14:55 LOG5 finish_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2010-Nov-03 23:14:55 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Nov-03 23:14:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 23:14:55 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Nov-03 23:14:55 LOG5 end_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2010-Nov-03 23:14:55 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2010-Nov-03 23:14:55 LOG5 begin_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2010-Nov-03 23:14:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2010-Nov-03 23:14:55 INFO1 config_mock: Starting to configure the Mock spectrometer 2010-Nov-03 23:14:55 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Nov-03 23:14:55 START begin_task: Starting task 'selecting calibration port' 2010-Nov-03 23:14:55 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2010-Nov-03 23:14:56 LOG3 vw_send: To DATATAKING: calport 3 2010-Nov-03 23:14:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Nov-03 23:14:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 23:14:56 START begin_task: Starting task 'waiting on calport' 2010-Nov-03 23:14:56 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2010-Nov-03 23:14:56 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Nov-03 23:14:56 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Nov-03 23:14:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 23:14:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:14:56 LOG4 got_cormsg: From DATATAKING: DONE 2010-Nov-03 23:14:56 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Nov-03 23:14:56 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2010-Nov-03 23:14:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Nov-03 23:14:56 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Nov-03 23:14:56 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2010-Nov-03 23:14:56 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Nov-03 23:14:56 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Nov-03 23:14:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Nov-03 23:14:56 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2010-Nov-03 23:14:56 LOG3 CALCONTROL-caltrig: Software trigger 2010-Nov-03 23:14:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:14:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Nov-03 23:14:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Nov-03 23:14:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Nov-03 23:14:56 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2010-Nov-03 23:14:56 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Nov-03 23:14:56 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Nov-03 23:14:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Nov-03 23:14:56 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2010-Nov-03 23:14:56 LOG3 CALCONTROL-caltrig: Software trigger 2010-Nov-03 23:14:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Nov-03 23:14:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Nov-03 23:14:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Nov-03 23:14:56 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2010-Nov-03 23:14:56 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2010-Nov-03 23:14:56 LOG3 socket_wait: To MOCK: NOP 2010-Nov-03 23:14:56 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2010-Nov-03 23:14:56 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2010-Nov-03 23:14:56 ALERT got_mock_message: Mock spectrometer restarting 2010-Nov-03 23:14:56 LOG4 from_mock: From MOCK: nop ok 2010-Nov-03 23:14:56 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2010-Nov-03 23:14:56 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2010-Nov-03 23:14:56 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2010-Nov-03 23:14:56 LOG2 config_mock: Mock spectrometer configuration group 1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2010-Nov-03 23:14:56 LOG2 config_mock: Mock spectrometer configuration group 1 (0): datatype=AB 2010-Nov-03 23:14:56 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bits=32 2010-Nov-03 23:14:56 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bwmhz=172.032 2010-Nov-03 23:14:56 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevif1hz=250000000 2010-Nov-03 23:14:56 LOG2 config_mock: Mock spectrometer configuration group 1 (0): digfreqoffhz=0.0 2010-Nov-03 23:14:56 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fftlen=8192 2010-Nov-03 23:14:56 LOG2 config_mock: Mock spectrometer configuration group 1 (0): dumptmsec=1.0 2010-Nov-03 23:14:56 LOG2 config_mock: Mock spectrometer configuration group 1 (0): blankatod=1 2010-Nov-03 23:14:56 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskadc=13 2010-Nov-03 23:14:56 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskpfb=0 2010-Nov-03 23:14:56 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskacc=0 2010-Nov-03 23:14:56 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskash=0 2010-Nov-03 23:14:56 LOG2 config_mock: Mock spectrometer configuration group 1 (0): adcclkhz=172032000 2010-Nov-03 23:14:56 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevlohz=175000000 325000000 2010-Nov-03 23:14:56 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fileprefix=a2048 2010-Nov-03 23:14:56 LOG2 config_mock: Mock spectrometer configuration group 1 (0): maxfilesizemb=2048 2010-Nov-03 23:14:56 LOG2 config_mock: Mock spectrometer configuration group 1 (0): calctl=c0 2010-Nov-03 23:14:56 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group 1' using string 'conf' 2010-Nov-03 23:14:56 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bits=32:bwmhz=172.032:pdevif1hz=250000000:digfreqoffhz=0.0:fftlen=8192:dumptmsec=1.0:blankatod=1:emaskadc=13:emaskpfb=0:emaskacc=0:emaskash=0:adcclkhz=172032000:pdevlohz=175000000 325000000:fileprefix=a2048:maxfilesizemb=2048:calctl=c0 2010-Nov-03 23:14:56 START begin_task: Starting task 'waiting on configure Mock spectrometer group 1' 2010-Nov-03 23:14:56 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2010-Nov-03 23:14:57 LOG4 from_mock: From MOCK: confok 2010-Nov-03 23:14:57 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group 1' with status 'OK' 2010-Nov-03 23:14:57 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2010-Nov-03 23:14:57 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group 1' 2010-Nov-03 23:14:57 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group 2' using string 'conf' 2010-Nov-03 23:14:57 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2010-Nov-03 23:14:57 START begin_task: Starting task 'waiting on disable Mock spectrometer group 2' 2010-Nov-03 23:14:57 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2010-Nov-03 23:14:57 LOG4 from_mock: From MOCK: confok 2010-Nov-03 23:14:57 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group 2' with status 'OK' 2010-Nov-03 23:14:57 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2010-Nov-03 23:14:57 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group 2' 2010-Nov-03 23:14:57 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2010-Nov-03 23:14:57 LOG5 finish_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2010-Nov-03 23:14:57 DONE finish_task: DONE finished configuring: the Mock spectrometer 2010-Nov-03 23:14:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Nov-03 23:14:57 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2010-Nov-03 23:14:57 LOG5 end_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2010-Nov-03 23:14:57 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2010-Nov-03 23:14:57 COMMAND run_command_line: EXECUTING command 29: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2010-Nov-03 23:14:57 COMMAND run_command_line: EXECUTING command 30: 'CATALOG AGESFull.cat' 2010-Nov-03 23:14:57 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2010-Nov-03 23:14:57 COMMAND run_command_line: EXECUTING command 33: 'IF LSTSLEW(AGES33PP_p3_110) < 010138 THEN' 2010-Nov-03 23:14:58 LOG3 is_if_valid: Current source data: up 523.0 12.2 UP - - 53 0.6 2010-Nov-03 23:14:58 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES33PP_p3_110) < 010138 2010-Nov-03 23:14:58 INFO5 is_if_valid: Condition parsed as: 1.6929750000000001 < 1.0272222222222223 2010-Nov-03 23:14:58 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGES33PP_p3_110) < 010138 THEN' 2010-Nov-03 23:14:58 COMMAND run_command_line: EXECUTING command 34: 'FIXEDDRIFT az=203.11 alfaangle=-3.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_110 ra=12400.00 dec=295630.00' 2010-Nov-03 23:14:58 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=203.11 alfaangle=-3.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_110 ra=12400.00 dec=295630.00' in non-true conditional branch 2010-Nov-03 23:14:58 COMMAND run_command_line: EXECUTING command 37: 'ENDIF' 2010-Nov-03 23:14:58 COMMAND run_command_line: EXECUTING command 40: 'IF LSTSLEW(AGES33PP_p1_004) < 012438 THEN' 2010-Nov-03 23:14:59 LOG3 is_if_valid: Current source data: up 526.4 14.8 UP - - 44 0.5 2010-Nov-03 23:14:59 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES33PP_p1_004) < 012438 2010-Nov-03 23:14:59 INFO5 is_if_valid: Condition parsed as: 1.6913083333333334 < 1.4105555555555556 2010-Nov-03 23:14:59 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGES33PP_p1_004) < 012438 THEN' 2010-Nov-03 23:14:59 COMMAND run_command_line: EXECUTING command 41: 'FIXEDDRIFT az=180.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_004 ra=12400.00 dec=323530.00' 2010-Nov-03 23:14:59 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=180.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_004 ra=12400.00 dec=323530.00' in non-true conditional branch 2010-Nov-03 23:14:59 COMMAND run_command_line: EXECUTING command 44: 'ENDIF' 2010-Nov-03 23:14:59 COMMAND run_command_line: EXECUTING command 47: 'IF LSTSLEW(AGES33PP_p3_112) < 014738 THEN' 2010-Nov-03 23:15:00 LOG3 is_if_valid: Current source data: up 522.9 12.2 UP - - 53 0.7 2010-Nov-03 23:15:00 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES33PP_p3_112) < 014738 2010-Nov-03 23:15:00 INFO5 is_if_valid: Condition parsed as: 1.6946416666666668 < 1.7938888888888889 2010-Nov-03 23:15:00 COMMAND run_command_line: EXECUTING command 48: 'FIXEDDRIFT az=156.79 alfaangle=41.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_112 ra=12400.00 dec=295330.00' 2010-Nov-03 23:15:00 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2010-Nov-03 23:15:00 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Nov-03 23:15:00 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 156.79 41.4 hcorcal 5 tracking no off lcorcal first 1 AGES33PP_p3_112 12400.00 295330.00 J 8500.0 Heliocentric velocity(optical)' 2010-Nov-03 23:15:00 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-Nov-03 23:15:00 LOG5 begin_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2010-Nov-03 23:15:00 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'galfasrc2' 2010-Nov-03 23:15:00 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-Nov-03 23:15:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES33PP_p3_112} 2010-Nov-03 23:15:00 INFO3 fixed_driftmap: Sending telescope to Az = 156.79 and ZA = 12.72 2010-Nov-03 23:15:00 LOG3 track_source: Calling 'track_source AGES33PP_p3_112 156.79 12.7237092716 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-Nov-03 23:15:00 START begin_task: Starting task 'sending tracking commands' 2010-Nov-03 23:15:00 LOG5 begin_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2010-Nov-03 23:15:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES33PP_p3_112} INFO {Slewing to source 'AGES33PP_p3_112' ...} 2010-Nov-03 23:15:00 INFO1 track_source: Starting to track AGES33PP_p3_112 2010-Nov-03 23:15:00 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES33PP_p3_112" 2010-Nov-03 23:15:00 LOG3 vw_send: To DATATAKING: set ra 156.79 2010-Nov-03 23:15:01 LOG3 vw_send: To DATATAKING: set dec 12.7237092716 2010-Nov-03 23:15:01 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Nov-03 23:15:01 LOG3 vw_send: To DATATAKING: pnt tr 156.79 12.7237092716 -CF 2010-Nov-03 23:15:01 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-Nov-03 23:15:01 STOP finish_task: Finishing task 'sending tracking commands' 2010-Nov-03 23:15:01 LOG5 finish_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2010-Nov-03 23:15:01 INFO2 finish_task: DONE finished sending: tracking commands 2010-Nov-03 23:15:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Nov-03 23:15:01 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Nov-03 23:15:01 LOG5 end_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2010-Nov-03 23:15:01 START begin_task: Starting task 'rotate ALFA to +41.4 degrees' 2010-Nov-03 23:15:01 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2010-Nov-03 23:15:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +41.4 degrees ...} 2010-Nov-03 23:15:01 INFO2 rotate_alfa: ALFA commanded to +41.4 degrees 2010-Nov-03 23:15:01 LOG3 sock_errsend: To ALFAMOTOR: POSITION 41.4 REPLY 2010-Nov-03 23:15:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Nov-03 23:15:01 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Nov-03 23:15:01 LOG5 begin_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2010-Nov-03 23:15:01 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES33PP_p3_112" 2010-Nov-03 23:15:01 LOG4 got_cormsg: From DATATAKING: set ra 156.79 2010-Nov-03 23:15:01 LOG4 got_cormsg: From DATATAKING: set dec 12.7237092716 2010-Nov-03 23:15:01 LOG4 got_cormsg: From DATATAKING: vw% 156.79 2010-Nov-03 23:15:01 LOG4 got_cormsg: From DATATAKING: vw% 12.7237092716 2010-Nov-03 23:15:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:15:01 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Nov-03 23:15:01 LOG4 got_cormsg: From DATATAKING: pnt tr 156.79 12.7237092716 -CF 2010-Nov-03 23:15:01 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-Nov-03 23:15:01 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Nov-03 23:15:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:15:15 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Nov-03 23:15:15 INFO3 alfa_motor: ALFA rotator in-position +41.40 degrees 2010-Nov-03 23:15:15 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Nov-03 23:15:15 LOG5 end_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2010-Nov-03 23:15:15 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Nov-03 23:15:15 STOP finish_task: Finishing task 'rotate ALFA to +41.4 degrees' 2010-Nov-03 23:15:15 LOG5 finish_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2010-Nov-03 23:15:15 INFO2 finish_task: DONE finished configuration: rotating ALFA to +41.4 degrees 2010-Nov-03 23:15:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Nov-03 23:15:15 STOP end_task: Finishing task 'rotate ALFA to +41.4 degrees' with status 'OK' 2010-Nov-03 23:15:15 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2010-Nov-03 23:15:15 START begin_task: Starting task 'waiting on telescope' 2010-Nov-03 23:15:15 LOG5 begin_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2010-Nov-03 23:15:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Nov-03 23:15:15 LOG3 waittrk: Start waittrk 5 2010-Nov-03 23:15:15 START begin_task: Starting task 'waiting on telescope movement' 2010-Nov-03 23:15:15 LOG5 begin_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2010-Nov-03 23:15:20 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Nov-03 23:15:20 LOG5 end_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2010-Nov-03 23:15:20 START begin_task: Starting task 'waiting on telescope on source' 2010-Nov-03 23:15:20 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2010-Nov-03 23:15:36 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Nov-03 23:15:36 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2010-Nov-03 23:15:36 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Nov-03 23:15:36 INFO2 waittrk: Now tracking AGES33PP_p3_112 2010-Nov-03 23:15:36 LOG4 waittrk: Current telescope position: Az = 516.52 ZA = 12.75 2010-Nov-03 23:15:36 STOP finish_task: Finishing task 'waiting on telescope' 2010-Nov-03 23:15:36 LOG5 finish_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2010-Nov-03 23:15:36 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Nov-03 23:15:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Nov-03 23:15:36 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Nov-03 23:15:36 LOG5 end_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2010-Nov-03 23:15:36 START begin_task: Starting task 'selecting calibration type' 2010-Nov-03 23:15:36 LOG5 begin_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2010-Nov-03 23:15:36 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Nov-03 23:15:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Nov-03 23:15:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 23:15:36 START begin_task: Starting task 'waiting on setcal' 2010-Nov-03 23:15:36 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2010-Nov-03 23:15:36 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Nov-03 23:15:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 23:15:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:15:36 LOG4 got_cormsg: From DATATAKING: DONE 2010-Nov-03 23:15:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Nov-03 23:15:36 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2010-Nov-03 23:15:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Nov-03 23:15:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Nov-03 23:15:36 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Nov-03 23:15:36 START begin_task: Starting task 'waiting on command to ALFA' 2010-Nov-03 23:15:36 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2010-Nov-03 23:15:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:15:37 LOG4 got_alfamon: From ALFAMON: ACK 2010-Nov-03 23:15:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Nov-03 23:15:37 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2010-Nov-03 23:15:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Nov-03 23:15:37 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Nov-03 23:15:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Nov-03 23:15:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Nov-03 23:15:37 START begin_task: Starting task 'waiting on command to ALFA' 2010-Nov-03 23:15:37 LOG5 begin_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2010-Nov-03 23:15:37 LOG4 got_alfamon: From ALFAMON: ACK 2010-Nov-03 23:15:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Nov-03 23:15:37 LOG5 end_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2010-Nov-03 23:15:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Nov-03 23:15:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Nov-03 23:15:37 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Nov-03 23:15:37 LOG5 end_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2010-Nov-03 23:15:37 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2010-Nov-03 23:15:37 INFO2 astwait: Waiting for 298 seconds from 03:15:37 to 03:20:35 UTC ... 2010-Nov-03 23:15:37 LOG4 send_obs_status: To obs_status: <1> TASKTIME 298 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Nov-03 23:15:37 START begin_task: Starting task 'waiting on waiting for AST time' 2010-Nov-03 23:15:37 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2010-Nov-03 23:20:35 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2010-Nov-03 23:20:35 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2010-Nov-03 23:20:35 INFO3 astwait: Finished waiting 2010-Nov-03 23:20:35 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Nov-03 23:20:35 LOG5 dopset_later: Calling 'dopset_later 60.819298732362718' 2010-Nov-03 23:20:35 INFO3 dopset_later: Setting Doppler correction for 23:21:35 (60.8 seconds from now) 2010-Nov-03 23:20:35 LOG5 antvel: Calling 'antvel 156.790000 12.723709 F Heliocentric 60.819298732362718' 2010-Nov-03 23:20:35 LOG2 antvel: Transforming current Az = 156.79 ZA = 12.72 to apparent RA = 01:24:38.6 Dec = +29:57:08.2 2010-Nov-03 23:20:35 LOG2 antvel: Parameters to Doppler: Heliocentric 98495 2010 307 0.0 2010-Nov-03 23:20:35 INFO5 antvel: Computed antenna velocity: +5.64749 km/s 2010-Nov-03 23:20:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=5.6474852021000004 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-Nov-03 23:20:35 INFO4 dopset_gen: New sky frequencies: 1381.217409 1381.217409 1381.217409 1381.217409 1381.217409 1381.217409 1381.217409 1381.217409 1381.217409 2010-Nov-03 23:20:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.217409 sky0=1381.217409 sky1=1381.217409 sky2=1381.217409 sky3=1381.217409 sky4=1381.217409 sky5=1381.217409 sky6=1381.217409 sky7=1381.217409 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Nov-03 23:20:35 LOG2 dopset_gen: Result from 'sky2syn': 1631.217409 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Nov-03 23:20:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631217409.0} 2010-Nov-03 23:20:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:20:35 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2010-Nov-03 23:20:35 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2010-Nov-03 23:20:35 INFO5 fixed_driftmap: Tracking J2000 position: RA = 01:23:04.4 Dec = +29:53:45.1 2010-Nov-03 23:20:35 LOG3 track_source: Calling 'track_source AGES33PP_p3_112 012304.4 295345.1 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-Nov-03 23:20:35 START begin_task: Starting task 'sending tracking commands' 2010-Nov-03 23:20:35 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2010-Nov-03 23:20:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES33PP_p3_112} INFO {Slewing to source 'AGES33PP_p3_112' ...} 2010-Nov-03 23:20:35 INFO1 track_source: Starting to track AGES33PP_p3_112 2010-Nov-03 23:20:35 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES33PP_p3_112" 2010-Nov-03 23:20:35 LOG3 vw_send: To DATATAKING: set ra 012304.4 2010-Nov-03 23:20:35 LOG3 vw_send: To DATATAKING: set dec 295345.1 2010-Nov-03 23:20:35 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Nov-03 23:20:35 LOG3 vw_send: To DATATAKING: pnt tr 012304.4 295345.1 -CJ 2010-Nov-03 23:20:35 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-Nov-03 23:20:35 STOP finish_task: Finishing task 'sending tracking commands' 2010-Nov-03 23:20:35 LOG5 finish_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2010-Nov-03 23:20:35 INFO2 finish_task: DONE finished sending: tracking commands 2010-Nov-03 23:20:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Nov-03 23:20:35 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Nov-03 23:20:35 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2010-Nov-03 23:20:35 START begin_task: Starting task 'waiting on telescope' 2010-Nov-03 23:20:35 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2010-Nov-03 23:20:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Nov-03 23:20:35 LOG3 waittrk: Start waittrk 5 2010-Nov-03 23:20:35 START begin_task: Starting task 'waiting on telescope movement' 2010-Nov-03 23:20:35 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2010-Nov-03 23:20:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631217409.0} 2010-Nov-03 23:20:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Nov-03 23:20:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:20:35 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES33PP_p3_112" 2010-Nov-03 23:20:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:20:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:20:35 LOG4 got_cormsg: From DATATAKING: set ra 012304.4 2010-Nov-03 23:20:35 LOG4 got_cormsg: From DATATAKING: set dec 295345.1 2010-Nov-03 23:20:35 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Nov-03 23:20:35 LOG4 got_cormsg: From DATATAKING: pnt tr 012304.4 295345.1 -CJ 2010-Nov-03 23:20:35 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-Nov-03 23:20:35 LOG4 got_cormsg: From DATATAKING: 012304.4 2010-Nov-03 23:20:35 LOG4 got_cormsg: From DATATAKING: vw% 295345.1 2010-Nov-03 23:20:35 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2010-Nov-03 23:20:40 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Nov-03 23:20:40 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2010-Nov-03 23:20:40 START begin_task: Starting task 'waiting on telescope on source' 2010-Nov-03 23:20:40 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2010-Nov-03 23:20:42 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Nov-03 23:20:42 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2010-Nov-03 23:20:42 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Nov-03 23:20:42 INFO2 waittrk: Now tracking AGES33PP_p3_112 2010-Nov-03 23:20:42 LOG4 waittrk: Current telescope position: Az = 516.48 ZA = 12.76 2010-Nov-03 23:20:42 STOP finish_task: Finishing task 'waiting on telescope' 2010-Nov-03 23:20:42 LOG5 finish_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2010-Nov-03 23:20:42 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Nov-03 23:20:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Nov-03 23:20:42 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Nov-03 23:20:42 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2010-Nov-03 23:20:42 START begin_task: Starting task 'adjusting WAPP+Mock power' 2010-Nov-03 23:20:42 LOG5 begin_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2010-Nov-03 23:20:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2010-Nov-03 23:20:42 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2010-Nov-03 23:20:42 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Nov-03 23:20:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Nov-03 23:20:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 23:20:42 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Nov-03 23:20:42 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2010-Nov-03 23:20:43 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Nov-03 23:20:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 23:20:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:20:45 LOG4 got_cormsg: From DATATAKING: DONE 2010-Nov-03 23:20:45 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Nov-03 23:20:45 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2010-Nov-03 23:20:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Nov-03 23:20:45 START begin_task: Starting task 'adjusting WAPP power' 2010-Nov-03 23:20:45 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2010-Nov-03 23:20:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Nov-03 23:20:45 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Nov-03 23:20:45 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Nov-03 23:20:45 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Nov-03 23:20:45 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Nov-03 23:20:45 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Nov-03 23:20:45 LOG5 begin_task: Level: (5) ID = <10151> Status = 0 0 0 0 ok 2010-Nov-03 23:20:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Nov-03 23:20:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:20:46 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 7 dB 2010-Nov-03 23:20:46 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 4 dB 2010-Nov-03 23:20:46 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 4 3 dB 2010-Nov-03 23:20:46 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-Nov-03 23:20:46 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Nov-03 23:20:46 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Nov-03 23:20:46 LOG5 end_task: Level: (5) ID = <10151> Status = 0 0 0 0 ok 2010-Nov-03 23:20:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.963 0.981 ALFA beam 1: 1.045 0.909 2010-Nov-03 23:20:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.071 1.015 ALFA beam 3: 0.888 0.994 2010-Nov-03 23:20:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.117 0.852 ALFA beam 5: 1.054 0.991 2010-Nov-03 23:20:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.976 0.101 ALFA beam 7: 1.063 0.120 2010-Nov-03 23:20:46 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Nov-03 23:20:46 LOG5 finish_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2010-Nov-03 23:20:46 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Nov-03 23:20:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Nov-03 23:20:46 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Nov-03 23:20:46 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2010-Nov-03 23:20:46 START begin_task: Starting task 'adjusting Mock spectrometer power' 2010-Nov-03 23:20:46 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2010-Nov-03 23:20:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Nov-03 23:20:46 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2010-Nov-03 23:20:46 LOG3 socket_wait: To MOCK: ADJP30 2010-Nov-03 23:20:46 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2010-Nov-03 23:20:46 LOG5 begin_task: Level: (5) ID = <10153> Status = 0 0 0 0 ok 2010-Nov-03 23:20:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2010-Nov-03 23:20:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.963 0.981 1.045 0.909 2010-Nov-03 23:20:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.071 1.015 0.888 0.994 2010-Nov-03 23:20:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.117 0.852 1.054 0.991 2010-Nov-03 23:20:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.976 0.101 1.063 0.120 2010-Nov-03 23:20:51 INFO3 from_mock: From MOCK: b0s0g0 rms:A 33.1 29.2 B 29.3 29.3 mn:A -0.2 0.7 B 0.4 0.5 gn: 10 10 2010-Nov-03 23:20:51 INFO3 from_mock: From MOCK: b0s1g0 rms:A 32.9 31.6 B 30.0 31.7 mn:A 0.2 0.3 B 0.1 -0.4 gn: 10 10 2010-Nov-03 23:20:52 INFO3 from_mock: From MOCK: b1s0g0 rms:A 31.6 29.7 B 30.5 27.4 mn:A -0.2 -0.3 B 0.3 -0.2 gn: 9 9 2010-Nov-03 23:20:52 INFO3 from_mock: From MOCK: b1s1g0 rms:A 34.3 31.7 B 28.6 28.6 mn:A -0.2 -0.4 B 0.4 -0.2 gn: 9 8 2010-Nov-03 23:20:52 INFO3 from_mock: From MOCK: b2s0g0 rms:A 30.9 30.0 B 29.6 30.9 mn:A -0.1 -0.2 B 0.3 -0.2 gn: 12 11 2010-Nov-03 23:20:52 INFO3 from_mock: From MOCK: b2s1g0 rms:A 31.1 31.5 B 31.4 29.1 mn:A 0.1 -0.3 B -0.1 -0.1 gn: 13 11 2010-Nov-03 23:20:52 INFO3 from_mock: From MOCK: b3s0g0 rms:A 29.9 29.7 B 29.2 26.1 mn:A -0.2 0.1 B 0.0 -0.2 gn: 11 11 2010-Nov-03 23:20:52 INFO3 from_mock: From MOCK: b3s1g0 rms:A 28.8 28.2 B 29.6 30.9 mn:A 0.3 -0.4 B 0.4 0.4 gn: 10 11 2010-Nov-03 23:20:52 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.5 28.6 B 29.9 30.0 mn:A 0.3 -0.5 B 0.1 0.4 gn: 10 14 2010-Nov-03 23:20:52 INFO3 from_mock: From MOCK: b4s1g0 rms:A 33.3 30.2 B 30.6 29.4 mn:A -0.3 0.3 B -0.2 -0.6 gn: 12 17 2010-Nov-03 23:20:52 INFO3 from_mock: From MOCK: b5s0g0 rms:A 30.3 29.9 B 30.8 30.7 mn:A -0.0 0.1 B 0.8 -0.1 gn: 11 11 2010-Nov-03 23:20:52 INFO3 from_mock: From MOCK: b5s1g0 rms:A 32.9 32.1 B 29.4 29.5 mn:A -0.0 -0.2 B 0.4 0.2 gn: 11 9 2010-Nov-03 23:20:52 INFO3 from_mock: From MOCK: b6s0g0 rms:A 30.3 27.9 B 30.9 31.7 mn:A -0.2 -0.0 B 0.1 -0.4 gn: 12 25 2010-Nov-03 23:20:52 INFO3 from_mock: From MOCK: b6s1g0 rms:A 32.9 30.0 B 29.2 28.3 mn:A -0.2 0.2 B -0.2 -0.3 gn: 13 27 2010-Nov-03 23:20:52 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2010-Nov-03 23:20:52 LOG5 end_task: Level: (5) ID = <10153> Status = 0 0 0 0 ok 2010-Nov-03 23:20:52 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2010-Nov-03 23:20:52 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2010-Nov-03 23:20:52 LOG5 finish_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2010-Nov-03 23:20:52 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2010-Nov-03 23:20:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Nov-03 23:20:52 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2010-Nov-03 23:20:52 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2010-Nov-03 23:20:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Nov-03 23:20:52 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2010-Nov-03 23:20:52 LOG5 finish_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2010-Nov-03 23:20:52 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2010-Nov-03 23:20:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Nov-03 23:20:52 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2010-Nov-03 23:20:52 LOG5 end_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2010-Nov-03 23:20:52 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 J. Hernandez 2010-Nov-03 23:20:52 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 J. Hernandez 2010-Nov-03 23:20:52 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 J. Hernandez 2010-Nov-03 23:20:52 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 J. Hernandez 2010-Nov-03 23:20:52 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2010-Nov-03 23:20:52 START begin_task: Starting task 'WAPP+Mock calibration' 2010-Nov-03 23:20:52 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2010-Nov-03 23:20:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2010-Nov-03 23:20:52 START begin_task: Starting task 'selecting calibration type' 2010-Nov-03 23:20:52 LOG5 begin_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2010-Nov-03 23:20:52 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Nov-03 23:20:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Nov-03 23:20:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 23:20:52 START begin_task: Starting task 'waiting on setcal' 2010-Nov-03 23:20:52 LOG5 begin_task: Level: (5) ID = <10156> Status = 0 0 0 0 ok 2010-Nov-03 23:20:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 J. Hernandez' 2010-Nov-03 23:20:52 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Nov-03 23:20:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Nov-03 23:20:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:20:52 LOG4 got_cormsg: From DATATAKING: DONE 2010-Nov-03 23:20:52 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Nov-03 23:20:52 LOG5 end_task: Level: (5) ID = <10156> Status = 0 0 0 0 ok 2010-Nov-03 23:20:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Nov-03 23:20:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Nov-03 23:20:52 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Nov-03 23:20:52 START begin_task: Starting task 'waiting on command to ALFA' 2010-Nov-03 23:20:52 LOG5 begin_task: Level: (5) ID = <10157> Status = 0 0 0 0 ok 2010-Nov-03 23:20:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:20:52 LOG4 got_alfamon: From ALFAMON: ACK 2010-Nov-03 23:20:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Nov-03 23:20:52 LOG5 end_task: Level: (5) ID = <10157> Status = 0 0 0 0 ok 2010-Nov-03 23:20:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Nov-03 23:20:52 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Nov-03 23:20:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Nov-03 23:20:53 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Nov-03 23:20:53 START begin_task: Starting task 'waiting on command to ALFA' 2010-Nov-03 23:20:53 LOG5 begin_task: Level: (5) ID = <10158> Status = 0 0 0 0 ok 2010-Nov-03 23:20:53 LOG4 got_alfamon: From ALFAMON: ACK 2010-Nov-03 23:20:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Nov-03 23:20:53 LOG5 end_task: Level: (5) ID = <10158> Status = 0 0 0 0 ok 2010-Nov-03 23:20:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Nov-03 23:20:53 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Nov-03 23:20:53 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Nov-03 23:20:53 LOG5 end_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2010-Nov-03 23:20:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Nov-03 23:20:53 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Nov-03 23:20:53 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Nov-03 23:20:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Nov-03 23:20:53 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2010-Nov-03 23:20:53 LOG3 CALCONTROL-caltrig: Software trigger 2010-Nov-03 23:20:53 NOTE WAPPDATA-new_file: New FITS file: wapp.20101103.a2048.0003.fits 2010-Nov-03 23:20:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Nov-03 23:20:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Nov-03 23:20:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Nov-03 23:20:53 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2010-Nov-03 23:20:53 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Nov-03 23:20:53 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-Nov-03 23:20:53 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2010-Nov-03 23:20:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Nov-03 23:20:53 LOG5 log_alfabeam: Parameters: 1.3845555555555553 29.895861111111103 1.782135 2010.8431836388065 41.399944 2010-Nov-03 23:20:53 LOG4 log_alfabeam: ALFABEAM 0 1.384555555555562 29.895861111111124 2010-Nov-03 23:20:53 LOG4 log_alfabeam: ALFABEAM 1 1.386819316202047 29.793930462446458 2010-Nov-03 23:20:53 LOG4 log_alfabeam: ALFABEAM 2 1.391643493564899 29.861905233978671 2010-Nov-03 23:20:53 LOG4 log_alfabeam: ALFABEAM 3 1.389438907925729 29.964069063997414 2010-Nov-03 23:20:53 LOG4 log_alfabeam: ALFABEAM 4 1.382308195767943 29.997887556576302 2010-Nov-03 23:20:53 LOG4 log_alfabeam: ALFABEAM 5 1.377423339427009 29.929079430173175 2010-Nov-03 23:20:53 LOG4 log_alfabeam: ALFABEAM 6 1.379729752496978 29.827290387855754 2010-Nov-03 23:20:53 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-Nov-03 23:20:53 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-Nov-03 23:20:53 LOG3 take_mock_data: PSET configuration: obsnm=J. Hernandez 2010-Nov-03 23:20:53 LOG3 take_mock_data: PSET configuration: object=AGES33PP_p3_112 2010-Nov-03 23:20:53 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-Nov-03 23:20:53 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-Nov-03 23:20:53 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-Nov-03 23:20:53 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-Nov-03 23:20:53 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-Nov-03 23:20:53 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-Nov-03 23:20:53 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2010-Nov-03 23:20:53 LOG3 take_mock_data: PSET configuration: scantype=ON 2010-Nov-03 23:20:53 LOG3 take_mock_data: PSET configuration: patternid=30700015 2010-Nov-03 23:20:53 LOG3 take_mock_data: PSET configuration: scanid=30700029 2010-Nov-03 23:20:53 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-Nov-03 23:20:53 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-Nov-03 23:20:53 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-Nov-03 23:20:53 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456217409.0 2010-Nov-03 23:20:53 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306217409.0 2010-Nov-03 23:20:53 LOG3 take_mock_data: PSET configuration: filetype=1 2010-Nov-03 23:20:53 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-Nov-03 23:20:53 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=J. Hernandez:object=AGES33PP_p3_112:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=30700015:scanid=30700029:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456217409.0:topobfreqhz=1306217409.0:filetype=1 2010-Nov-03 23:20:53 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-Nov-03 23:20:53 LOG5 begin_task: Level: (5) ID = <10161> Status = 0 0 0 0 ok 2010-Nov-03 23:20:53 LOG4 from_mock: From MOCK: psetok 2010-Nov-03 23:20:53 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-Nov-03 23:20:53 LOG5 end_task: Level: (5) ID = <10161> Status = 0 0 0 0 ok 2010-Nov-03 23:20:53 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-Nov-03 23:20:53 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-Nov-03 23:20:53 LOG3 socket_wait: To MOCK: STAR5 2010-Nov-03 23:20:53 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-Nov-03 23:20:53 LOG5 begin_task: Level: (5) ID = <10162> Status = 0 0 0 0 ok 2010-Nov-03 23:20:53 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20101103.a2048.0003.fits} 2010-Nov-03 23:20:53 LOG4 from_mock: From MOCK: starok 2010-Nov-03 23:20:53 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-Nov-03 23:20:53 LOG5 end_task: Level: (5) ID = <10162> Status = 0 0 0 0 ok 2010-Nov-03 23:20:53 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-Nov-03 23:20:53 INFO2 take_data: Starting WAPP+Mock 5-second scan: 30700029 2010-Nov-03 23:20:54 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-Nov-03 23:20:54 LOG5 begin_task: Level: (5) ID = <10163> Status = 0 0 0 0 ok 2010-Nov-03 23:20:54 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-Nov-03 23:20:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Nov-03 23:20:54 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-Nov-03 23:20:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Nov-03 23:20:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12055.00 2010-Nov-03 23:20:55 INFO2 got_mock_message: Mock spectrometer start file number is 00000 2010-Nov-03 23:20:55 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-Nov-03 23:20:55 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2010-Nov-03 23:20:55 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2010-Nov-03 23:20:55 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-Nov-03 23:20:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-Nov-03 23:20:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-Nov-03 23:20:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-Nov-03 23:20:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2010-Nov-03 23:20:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-Nov-03 23:20:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-Nov-03 23:20:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-Nov-03 23:20:55 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-Nov-03 23:20:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2010-Nov-03 23:20:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2010-Nov-03 23:20:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2010-Nov-03 23:20:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2010-Nov-03 23:20:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2010-Nov-03 23:20:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2010-Nov-03 23:20:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2010-Nov-03 23:20:58 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 23:20:58.01 2010-Nov-03 23:20:58 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1288840858.01 Wed Nov 3 23:20:58 2010 2010-Nov-03 23:20:58 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-Nov-03 23:21:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.217409 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Nov-03 23:21:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.217409 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:21:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.217409 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:21:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.217409 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:21:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.217409 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.476 (still bad) 2010-Nov-03 23:21:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.217409 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:21:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.217409 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:21:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.217409 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:21:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.217409 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:21:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (499999964 != 499999966 diff = 2)! 2010-Nov-03 23:21:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (499999964 != 499999966 diff = 2)! 2010-Nov-03 23:21:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (499999964 != 499999966 diff = 2)! 2010-Nov-03 23:21:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (499999964 != 499999966 diff = 2)! 2010-Nov-03 23:21:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (499999964 != 499999966 diff = 2)! 2010-Nov-03 23:21:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (499999964 != 499999966 diff = 2)! 2010-Nov-03 23:21:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (499999964 != 499999966 diff = 2)! 2010-Nov-03 23:21:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (499999964 != 499999966 diff = 2)! 2010-Nov-03 23:21:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (499999964 != 499999966 diff = 2)! 2010-Nov-03 23:21:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (499999964 != 499999966 diff = 2)! 2010-Nov-03 23:21:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (499999964 != 499999966 diff = 2)! 2010-Nov-03 23:21:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (499999964 != 499999966 diff = 2)! 2010-Nov-03 23:21:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (499999964 != 499999966 diff = 2)! 2010-Nov-03 23:21:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (499999964 != 499999966 diff = 2)! 2010-Nov-03 23:21:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Nov-03 23:21:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (499999964 != 499999966 diff = 2)! 2010-Nov-03 23:21:03 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2010-Nov-03 23:21:04 INFO1 got_mock_message: From MOCK: DONE with observation 2010-Nov-03 23:21:04 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2010-Nov-03 23:21:04 LOG5 end_task: Level: (5) ID = <10163> Status = 0 0 0 0 ok 2010-Nov-03 23:21:04 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2010-Nov-03 23:21:04 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2010-Nov-03 23:21:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Nov-03 23:21:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Nov-03 23:21:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Nov-03 23:21:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Nov-03 23:21:04 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2010-Nov-03 23:21:04 LOG3 CALCONTROL-caltrig: Software trigger 2010-Nov-03 23:21:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Nov-03 23:21:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Nov-03 23:21:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Nov-03 23:21:04 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2010-Nov-03 23:21:04 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2010-Nov-03 23:21:04 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-Nov-03 23:21:04 LOG5 begin_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2010-Nov-03 23:21:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2010-Nov-03 23:21:04 LOG5 log_alfabeam: Parameters: 1.3845555555555553 29.895861111111103 1.785199 2010.8431839873756 41.399944 2010-Nov-03 23:21:04 LOG4 log_alfabeam: ALFABEAM 0 1.384555555555560 29.895861111111078 2010-Nov-03 23:21:04 LOG4 log_alfabeam: ALFABEAM 1 1.386844049554470 29.794023974453484 2010-Nov-03 23:21:04 LOG4 log_alfabeam: ALFABEAM 2 1.391651749713847 29.862197291381705 2010-Nov-03 23:21:04 LOG4 log_alfabeam: ALFABEAM 3 1.389422256918459 29.964269737171747 2010-Nov-03 23:21:04 LOG4 log_alfabeam: ALFABEAM 4 1.382283360875802 29.997794569021952 2010-Nov-03 23:21:04 LOG4 log_alfabeam: ALFABEAM 5 1.377415333684927 29.928786477182864 2010-Nov-03 23:21:04 LOG4 log_alfabeam: ALFABEAM 6 1.379746406389317 29.827092534445885 2010-Nov-03 23:21:04 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-Nov-03 23:21:04 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-Nov-03 23:21:04 LOG3 take_mock_data: PSET configuration: obsnm=J. Hernandez 2010-Nov-03 23:21:04 LOG3 take_mock_data: PSET configuration: object=AGES33PP_p3_112 2010-Nov-03 23:21:04 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-Nov-03 23:21:04 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-Nov-03 23:21:04 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-Nov-03 23:21:04 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-Nov-03 23:21:04 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-Nov-03 23:21:04 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-Nov-03 23:21:04 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2010-Nov-03 23:21:04 LOG3 take_mock_data: PSET configuration: scantype=OFF 2010-Nov-03 23:21:04 LOG3 take_mock_data: PSET configuration: patternid=30700015 2010-Nov-03 23:21:04 LOG3 take_mock_data: PSET configuration: scanid=30700030 2010-Nov-03 23:21:04 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-Nov-03 23:21:04 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-Nov-03 23:21:04 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-Nov-03 23:21:04 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456217409.0 2010-Nov-03 23:21:04 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306217409.0 2010-Nov-03 23:21:04 LOG3 take_mock_data: PSET configuration: filetype=1 2010-Nov-03 23:21:04 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-Nov-03 23:21:04 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=J. Hernandez:object=AGES33PP_p3_112:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=30700015:scanid=30700030:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456217409.0:topobfreqhz=1306217409.0:filetype=1 2010-Nov-03 23:21:04 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-Nov-03 23:21:04 LOG5 begin_task: Level: (5) ID = <10166> Status = 0 0 0 0 ok 2010-Nov-03 23:21:04 LOG4 from_mock: From MOCK: psetok 2010-Nov-03 23:21:04 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-Nov-03 23:21:04 LOG5 end_task: Level: (5) ID = <10166> Status = 0 0 0 0 ok 2010-Nov-03 23:21:04 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-Nov-03 23:21:04 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-Nov-03 23:21:04 LOG3 socket_wait: To MOCK: STAR5 2010-Nov-03 23:21:04 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-Nov-03 23:21:04 LOG5 begin_task: Level: (5) ID = <10167> Status = 0 0 0 0 ok 2010-Nov-03 23:21:04 LOG4 from_mock: From MOCK: starok 2010-Nov-03 23:21:04 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-Nov-03 23:21:04 LOG5 end_task: Level: (5) ID = <10167> Status = 0 0 0 0 ok 2010-Nov-03 23:21:04 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-Nov-03 23:21:04 INFO2 take_data: Starting WAPP+Mock 5-second scan: 30700030 2010-Nov-03 23:21:04 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-Nov-03 23:21:04 LOG5 begin_task: Level: (5) ID = <10168> Status = 0 0 0 0 ok 2010-Nov-03 23:21:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Nov-03 23:21:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2010-Nov-03 23:21:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12065.00 2010-Nov-03 23:21:05 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-Nov-03 23:21:05 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-Nov-03 23:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.535 (still bad) 2010-Nov-03 23:21:06 INFO2 got_mock_message: Mock spectrometer start file number is 00100 2010-Nov-03 23:21:06 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-Nov-03 23:21:06 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2010-Nov-03 23:21:06 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2010-Nov-03 23:21:06 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-Nov-03 23:21:06 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-Nov-03 23:21:06 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-Nov-03 23:21:06 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-Nov-03 23:21:06 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2010-Nov-03 23:21:06 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-Nov-03 23:21:06 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-Nov-03 23:21:06 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-Nov-03 23:21:06 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-Nov-03 23:21:06 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2010-Nov-03 23:21:06 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2010-Nov-03 23:21:06 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2010-Nov-03 23:21:06 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2010-Nov-03 23:21:06 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2010-Nov-03 23:21:06 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2010-Nov-03 23:21:06 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2010-Nov-03 23:21:09 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 23:21:09.01 2010-Nov-03 23:21:09 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1288840869.01 Wed Nov 3 23:21:09 2010 2010-Nov-03 23:21:09 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-Nov-03 23:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.217409 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Nov-03 23:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.217409 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.217409 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.217409 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.217409 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.217409 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.217409 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.217409 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.217409 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:21:10 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2010-Nov-03 23:21:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Nov-03 23:21:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (499999966 != 499999964 diff = 2)! 2010-Nov-03 23:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2010-Nov-03 23:21:14 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2010-Nov-03 23:21:15 INFO1 got_mock_message: From MOCK: DONE with observation 2010-Nov-03 23:21:15 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2010-Nov-03 23:21:15 LOG5 end_task: Level: (5) ID = <10168> Status = 0 0 0 0 ok 2010-Nov-03 23:21:15 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2010-Nov-03 23:21:15 LOG5 end_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2010-Nov-03 23:21:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Nov-03 23:21:15 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2010-Nov-03 23:21:15 LOG5 finish_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2010-Nov-03 23:21:15 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2010-Nov-03 23:21:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Nov-03 23:21:15 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2010-Nov-03 23:21:15 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2010-Nov-03 23:21:15 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2010-Nov-03 23:21:15 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 156.79 and ZA = 12.72 2010-Nov-03 23:21:15 LOG3 track_source: Calling 'track_source AGES33PP_p3_112 156.79 12.7237092716 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-Nov-03 23:21:15 START begin_task: Starting task 'sending tracking commands' 2010-Nov-03 23:21:15 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2010-Nov-03 23:21:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES33PP_p3_112} INFO {Slewing to source 'AGES33PP_p3_112' ...} 2010-Nov-03 23:21:15 INFO1 track_source: Starting to track AGES33PP_p3_112 2010-Nov-03 23:21:15 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES33PP_p3_112" 2010-Nov-03 23:21:15 LOG3 vw_send: To DATATAKING: set ra 156.79 2010-Nov-03 23:21:15 LOG3 vw_send: To DATATAKING: set dec 12.7237092716 2010-Nov-03 23:21:15 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Nov-03 23:21:15 LOG3 vw_send: To DATATAKING: pnt tr 156.79 12.7237092716 -CF 2010-Nov-03 23:21:15 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-Nov-03 23:21:15 STOP finish_task: Finishing task 'sending tracking commands' 2010-Nov-03 23:21:15 LOG5 finish_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2010-Nov-03 23:21:15 INFO2 finish_task: DONE finished sending: tracking commands 2010-Nov-03 23:21:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Nov-03 23:21:15 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Nov-03 23:21:15 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2010-Nov-03 23:21:15 LOG1 fixed_driftmap: Parameters: HA = +00:22:59.9 Start = 01:47:38.6 LST = 01:47:17.7 diff = 20.9 secs 2010-Nov-03 23:21:15 INFO2 fixed_driftmap: Waiting 18.9 seconds for RA 1:24:39 2010-Nov-03 23:21:15 INFO2 lstwait: Waiting for 18.8 secs from LST 01:47:18 to LST 01:47:37 ... 2010-Nov-03 23:21:15 LOG4 send_obs_status: To obs_status: <1> TASKTIME 18.826669323402164 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Nov-03 23:21:15 START begin_task: Starting task 'waiting on wait on LST' 2010-Nov-03 23:21:15 LOG5 begin_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2010-Nov-03 23:21:15 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES33PP_p3_112" 2010-Nov-03 23:21:15 LOG4 got_cormsg: From DATATAKING: set ra 156.79 2010-Nov-03 23:21:15 LOG4 got_cormsg: From DATATAKING: set dec 12.7237092716 2010-Nov-03 23:21:15 LOG4 got_cormsg: From DATATAKING: vw% 156.79 2010-Nov-03 23:21:15 LOG4 got_cormsg: From DATATAKING: vw% 12.7237092716 2010-Nov-03 23:21:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:21:15 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Nov-03 23:21:15 LOG4 got_cormsg: From DATATAKING: pnt tr 156.79 12.7237092716 -CF 2010-Nov-03 23:21:15 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-Nov-03 23:21:15 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Nov-03 23:21:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Nov-03 23:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2010-Nov-03 23:21:34 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2010-Nov-03 23:21:34 LOG5 end_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2010-Nov-03 23:21:34 LOG4 lstwait: Finished waiting 1.18 seconds late 2010-Nov-03 23:21:34 INFO3 lstwait: Finished waiting 2010-Nov-03 23:21:34 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Nov-03 23:21:34 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2010-Nov-03 23:21:34 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-Nov-03 23:21:34 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2010-Nov-03 23:21:34 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Nov-03 23:21:34 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-Nov-03 23:21:34 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2010-Nov-03 23:21:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Nov-03 23:21:34 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Nov-03 23:21:34 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-Nov-03 23:21:34 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-Nov-03 23:21:34 LOG3 take_mock_data: PSET configuration: obsnm=J. Hernandez 2010-Nov-03 23:21:34 LOG3 take_mock_data: PSET configuration: object=AGES33PP_p3_112 2010-Nov-03 23:21:34 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-Nov-03 23:21:34 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-Nov-03 23:21:34 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-Nov-03 23:21:34 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-Nov-03 23:21:34 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-Nov-03 23:21:34 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-Nov-03 23:21:34 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2010-Nov-03 23:21:34 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2010-Nov-03 23:21:34 LOG3 take_mock_data: PSET configuration: patternid=30700031 2010-Nov-03 23:21:34 LOG3 take_mock_data: PSET configuration: scanid=30700031 2010-Nov-03 23:21:34 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-Nov-03 23:21:34 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-Nov-03 23:21:34 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-Nov-03 23:21:34 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456217409.0 2010-Nov-03 23:21:34 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306217409.0 2010-Nov-03 23:21:34 LOG3 take_mock_data: PSET configuration: filetype=1 2010-Nov-03 23:21:34 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-Nov-03 23:21:34 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=J. Hernandez:object=AGES33PP_p3_112:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=30700031:scanid=30700031:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456217409.0:topobfreqhz=1306217409.0:filetype=1 2010-Nov-03 23:21:34 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-Nov-03 23:21:34 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2010-Nov-03 23:21:34 LOG4 from_mock: From MOCK: psetok 2010-Nov-03 23:21:34 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-Nov-03 23:21:34 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2010-Nov-03 23:21:34 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-Nov-03 23:21:34 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-Nov-03 23:21:34 LOG3 socket_wait: To MOCK: STAR1200 2010-Nov-03 23:21:34 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-Nov-03 23:21:34 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2010-Nov-03 23:21:34 LOG4 from_mock: From MOCK: starok 2010-Nov-03 23:21:34 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-Nov-03 23:21:34 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2010-Nov-03 23:21:34 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-Nov-03 23:21:34 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 30700031 2010-Nov-03 23:21:35 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-Nov-03 23:21:35 LOG5 begin_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2010-Nov-03 23:21:35 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-Nov-03 23:21:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Nov-03 23:21:35 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-Nov-03 23:21:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Nov-03 23:21:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12096.00 2010-Nov-03 23:21:36 INFO2 got_mock_message: Mock spectrometer start file number is 00200 2010-Nov-03 23:21:36 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-Nov-03 23:21:36 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1199.9 s 2010-Nov-03 23:21:36 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2010-Nov-03 23:21:36 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-Nov-03 23:21:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-Nov-03 23:21:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-Nov-03 23:21:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-Nov-03 23:21:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2010-Nov-03 23:21:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-Nov-03 23:21:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-Nov-03 23:21:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-Nov-03 23:21:36 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-Nov-03 23:21:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.16 GB 2010-Nov-03 23:21:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.16 GB 2010-Nov-03 23:21:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.16 GB 2010-Nov-03 23:21:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.16 GB 2010-Nov-03 23:21:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.16 GB 2010-Nov-03 23:21:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.16 GB 2010-Nov-03 23:21:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.16 GB 2010-Nov-03 23:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.217409 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Nov-03 23:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.217409 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.217409 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Nov-03 23:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.217409 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.217409 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.217409 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.217409 MHz Flip = 1 Band = 0 Mixer = 1011.000000 MHz 2010-Nov-03 23:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.217409 MHz Flip = 1 Band = 0 Mixer = 1020.000000 MHz 2010-Nov-03 23:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.217409 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2010-Nov-03 23:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.117 (still bad) 2010-Nov-03 23:21:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:21:39 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 23:21:39.01 2010-Nov-03 23:21:39 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1288840899.01 Wed Nov 3 23:21:39 2010 2010-Nov-03 23:21:39 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-Nov-03 23:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2010-Nov-03 23:21:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2010-Nov-03 23:21:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:21:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:21:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2010-Nov-03 23:21:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:21:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2010-Nov-03 23:21:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2010-Nov-03 23:21:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:21:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2010-Nov-03 23:21:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.966 0.990 1.033 0.904 2010-Nov-03 23:21:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 1.027 0.913 1.003 2010-Nov-03 23:21:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.120 0.853 1.034 0.975 2010-Nov-03 23:21:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.983 0.102 1.073 0.121 2010-Nov-03 23:21:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2010-Nov-03 23:21:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:21:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:21:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2010-Nov-03 23:21:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2010-Nov-03 23:21:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2010-Nov-03 23:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2010-Nov-03 23:21:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:21:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2010-Nov-03 23:22:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.110 (still bad) 2010-Nov-03 23:22:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.110 (still bad) 2010-Nov-03 23:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2010-Nov-03 23:22:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2010-Nov-03 23:22:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2010-Nov-03 23:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2010-Nov-03 23:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.115 (still bad) 2010-Nov-03 23:22:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2010-Nov-03 23:22:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2010-Nov-03 23:22:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2010-Nov-03 23:22:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2010-Nov-03 23:22:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.111 (still bad) 2010-Nov-03 23:22:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.108 (still bad) 2010-Nov-03 23:22:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2010-Nov-03 23:22:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2010-Nov-03 23:22:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2010-Nov-03 23:22:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2010-Nov-03 23:22:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2010-Nov-03 23:22:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2010-Nov-03 23:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2010-Nov-03 23:22:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2010-Nov-03 23:22:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2010-Nov-03 23:22:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2010-Nov-03 23:22:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2010-Nov-03 23:22:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.964 0.986 1.037 0.905 2010-Nov-03 23:22:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.070 1.017 0.907 0.996 2010-Nov-03 23:22:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.107 0.843 1.028 0.967 2010-Nov-03 23:22:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.977 0.101 1.065 0.120 2010-Nov-03 23:22:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2010-Nov-03 23:22:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.108 (still bad) 2010-Nov-03 23:22:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2010-Nov-03 23:22:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.105 (still bad) 2010-Nov-03 23:22:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:22:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:22:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.105 (still bad) 2010-Nov-03 23:23:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2010-Nov-03 23:23:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:23:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:23:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2010-Nov-03 23:23:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:23:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2010-Nov-03 23:23:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.108 (still bad) 2010-Nov-03 23:23:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:23:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2010-Nov-03 23:23:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:23:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2010-Nov-03 23:23:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.105 (still bad) 2010-Nov-03 23:23:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:23:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.105 (still bad) 2010-Nov-03 23:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2010-Nov-03 23:23:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2010-Nov-03 23:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2010-Nov-03 23:23:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:23:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:23:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.105 (still bad) 2010-Nov-03 23:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.108 (still bad) 2010-Nov-03 23:23:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:23:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2010-Nov-03 23:23:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2010-Nov-03 23:23:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:23:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:23:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2010-Nov-03 23:23:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2010-Nov-03 23:23:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2010-Nov-03 23:23:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:23:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2010-Nov-03 23:23:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2010-Nov-03 23:23:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:23:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2010-Nov-03 23:23:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2010-Nov-03 23:23:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:23:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2010-Nov-03 23:23:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2010-Nov-03 23:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2010-Nov-03 23:23:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2010-Nov-03 23:23:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.965 0.988 1.054 0.922 2010-Nov-03 23:23:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 1.014 0.902 0.989 2010-Nov-03 23:23:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 0.841 1.024 0.967 2010-Nov-03 23:23:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.974 0.101 1.062 0.121 2010-Nov-03 23:23:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2010-Nov-03 23:23:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2010-Nov-03 23:23:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:23:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:23:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2010-Nov-03 23:23:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:23:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2010-Nov-03 23:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2010-Nov-03 23:24:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.105 (still bad) 2010-Nov-03 23:24:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2010-Nov-03 23:24:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2010-Nov-03 23:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2010-Nov-03 23:24:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2010-Nov-03 23:24:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2010-Nov-03 23:24:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2010-Nov-03 23:24:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2010-Nov-03 23:24:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2010-Nov-03 23:24:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2010-Nov-03 23:24:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2010-Nov-03 23:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2010-Nov-03 23:24:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.108 (still bad) 2010-Nov-03 23:24:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2010-Nov-03 23:24:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2010-Nov-03 23:24:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2010-Nov-03 23:24:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2010-Nov-03 23:24:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2010-Nov-03 23:24:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.105 (still bad) 2010-Nov-03 23:24:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2010-Nov-03 23:24:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.105 (still bad) 2010-Nov-03 23:24:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:24:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2010-Nov-03 23:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2010-Nov-03 23:24:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2010-Nov-03 23:24:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2010-Nov-03 23:24:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.960 0.983 1.034 0.902 2010-Nov-03 23:24:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.064 1.013 0.901 0.991 2010-Nov-03 23:24:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.108 0.842 1.025 0.964 2010-Nov-03 23:24:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.976 0.102 1.064 0.121 2010-Nov-03 23:24:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2010-Nov-03 23:24:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2010-Nov-03 23:24:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2010-Nov-03 23:25:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2010-Nov-03 23:25:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2010-Nov-03 23:25:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2010-Nov-03 23:25:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2010-Nov-03 23:25:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2010-Nov-03 23:25:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.105 (still bad) 2010-Nov-03 23:25:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2010-Nov-03 23:25:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2010-Nov-03 23:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2010-Nov-03 23:25:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2010-Nov-03 23:25:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.105 (still bad) 2010-Nov-03 23:25:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.103 (still bad) 2010-Nov-03 23:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2010-Nov-03 23:25:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.103 (still bad) 2010-Nov-03 23:25:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2010-Nov-03 23:25:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2010-Nov-03 23:25:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2010-Nov-03 23:25:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.105 (still bad) 2010-Nov-03 23:25:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.105 (still bad) 2010-Nov-03 23:25:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2010-Nov-03 23:25:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2010-Nov-03 23:25:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2010-Nov-03 23:25:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2010-Nov-03 23:25:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2010-Nov-03 23:25:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2010-Nov-03 23:25:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2010-Nov-03 23:25:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:25:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2010-Nov-03 23:25:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.957 0.981 1.036 0.902 2010-Nov-03 23:25:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.071 1.018 0.903 0.990 2010-Nov-03 23:25:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.107 0.844 1.024 0.965 2010-Nov-03 23:25:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.976 0.101 1.063 0.120 2010-Nov-03 23:25:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2010-Nov-03 23:25:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2010-Nov-03 23:25:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:25:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2010-Nov-03 23:26:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2010-Nov-03 23:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2010-Nov-03 23:26:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2010-Nov-03 23:26:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2010-Nov-03 23:26:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2010-Nov-03 23:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.105 (still bad) 2010-Nov-03 23:26:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2010-Nov-03 23:26:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2010-Nov-03 23:26:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2010-Nov-03 23:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2010-Nov-03 23:26:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2010-Nov-03 23:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2010-Nov-03 23:26:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.109 (still bad) 2010-Nov-03 23:26:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2010-Nov-03 23:26:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2010-Nov-03 23:26:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2010-Nov-03 23:26:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2010-Nov-03 23:26:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.121 (still bad) 2010-Nov-03 23:26:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2010-Nov-03 23:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2010-Nov-03 23:26:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2010-Nov-03 23:26:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2010-Nov-03 23:26:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2010-Nov-03 23:26:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.105 (still bad) 2010-Nov-03 23:26:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.105 (still bad) 2010-Nov-03 23:26:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2010-Nov-03 23:26:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2010-Nov-03 23:26:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2010-Nov-03 23:26:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.958 0.979 1.034 0.902 2010-Nov-03 23:26:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 1.015 0.904 0.990 2010-Nov-03 23:26:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 0.843 1.024 0.965 2010-Nov-03 23:26:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.977 0.102 1.066 0.121 2010-Nov-03 23:26:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2010-Nov-03 23:26:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2010-Nov-03 23:27:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2010-Nov-03 23:27:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2010-Nov-03 23:27:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2010-Nov-03 23:27:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2010-Nov-03 23:27:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2010-Nov-03 23:27:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2010-Nov-03 23:27:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2010-Nov-03 23:27:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2010-Nov-03 23:27:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2010-Nov-03 23:27:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2010-Nov-03 23:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2010-Nov-03 23:27:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2010-Nov-03 23:27:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2010-Nov-03 23:27:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2010-Nov-03 23:27:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2010-Nov-03 23:27:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2010-Nov-03 23:27:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2010-Nov-03 23:27:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.116 (still bad) 2010-Nov-03 23:27:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2010-Nov-03 23:27:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.103 (still bad) 2010-Nov-03 23:27:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.107 (still bad) 2010-Nov-03 23:27:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2010-Nov-03 23:27:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.104 (still bad) 2010-Nov-03 23:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.113 (still bad) 2010-Nov-03 23:27:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.105 (still bad) 2010-Nov-03 23:27:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2010-Nov-03 23:27:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:27:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2010-Nov-03 23:27:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2010-Nov-03 23:27:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.962 0.981 1.033 0.901 2010-Nov-03 23:27:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.070 1.016 0.902 0.990 2010-Nov-03 23:27:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.841 1.025 0.963 2010-Nov-03 23:27:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.977 0.102 1.065 0.121 2010-Nov-03 23:27:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2010-Nov-03 23:28:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.114 (still bad) 2010-Nov-03 23:28:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2010-Nov-03 23:28:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2010-Nov-03 23:28:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2010-Nov-03 23:28:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2010-Nov-03 23:28:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2010-Nov-03 23:28:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2010-Nov-03 23:28:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2010-Nov-03 23:28:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2010-Nov-03 23:28:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2010-Nov-03 23:28:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2010-Nov-03 23:28:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2010-Nov-03 23:28:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.112 (still bad) 2010-Nov-03 23:28:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.104 (still bad) 2010-Nov-03 23:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2010-Nov-03 23:28:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2010-Nov-03 23:28:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2010-Nov-03 23:28:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.106 (still bad) 2010-Nov-03 23:28:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2010-Nov-03 23:28:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2010-Nov-03 23:28:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2010-Nov-03 23:28:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2010-Nov-03 23:28:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2010-Nov-03 23:28:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.108 (still bad) 2010-Nov-03 23:28:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2010-Nov-03 23:28:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2010-Nov-03 23:28:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2010-Nov-03 23:28:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2010-Nov-03 23:28:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2010-Nov-03 23:28:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.962 0.984 1.034 0.902 2010-Nov-03 23:28:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.069 1.018 0.902 0.992 2010-Nov-03 23:28:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.107 0.844 1.025 0.966 2010-Nov-03 23:28:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.976 0.102 1.065 0.121 2010-Nov-03 23:28:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:28:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2010-Nov-03 23:29:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.108 (still bad) 2010-Nov-03 23:29:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.107 (still bad) 2010-Nov-03 23:29:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:29:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2010-Nov-03 23:29:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2010-Nov-03 23:29:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.106 (still bad) 2010-Nov-03 23:29:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2010-Nov-03 23:29:09 LOG3 WAPP=4-chip_count: Counts don't match between